All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/9] ux500/Nomadik GPIO and pins update
@ 2012-04-23  9:14 ` Linus Walleij
  0 siblings, 0 replies; 4+ messages in thread
From: Linus Walleij @ 2012-04-23  9:14 UTC (permalink / raw)
  To: linux-kernel, linux-arm-kernel
  Cc: Grant Likely, Philippe LANGLAIS, Rabin Vincent, Jonas Aberg,
	Lee Jones, Linus Walleij

From: Linus Walleij <linus.walleij@linaro.org>

This is basically an update and sync of Nomadik and ux500 GPIO
development.

If you wonder why I introduce a deviant pin configuration path
not using the pin config subsystem it is because I want to build
atop of this work which I know works. It will be switched over
to pinctrl in later patch sets on top of this.

This is *almost* orthogonal to other ux500 development, but
there *might* be conflicts with Lee Jones' Device Tree work,
so I will try to create a separate orthogonal ux500 GPIO branch
for this stuff.

Linus Walleij (4):
  gpio/nomadik: use typesafe __io_address()
  plat-nomadik: new sleep mode pincfg macros
  ARM: ux500: remove a bunch of internal pull-ups
  ARM: ux500: update pin handling

Rabin Vincent (5):
  gpio/nomadik: don't set SLPM to 1 for non-wakeup pins
  gpio/nomadik: cache [rf]w?imsc
  gpio/nomadik: fix spurious interrupts with SKE
  gpio/nomadik: support low EMI mode
  ARM: ux500: implement pin API

 arch/arm/mach-ux500/Makefile                      |    2 +-
 arch/arm/mach-ux500/board-mop500-pins.c           |  394 ++++++++++++++++-----
 arch/arm/mach-ux500/board-mop500.h                |    4 +
 arch/arm/mach-ux500/pins-db8500.h                 |   72 ++--
 arch/arm/mach-ux500/pins.c                        |   88 +++++
 arch/arm/mach-ux500/pins.h                        |   46 +++
 arch/arm/plat-nomadik/include/plat/gpio-nomadik.h |    1 +
 arch/arm/plat-nomadik/include/plat/pincfg.h       |   19 +
 drivers/gpio/gpio-nomadik.c                       |  129 +++++--
 9 files changed, 591 insertions(+), 164 deletions(-)
 create mode 100644 arch/arm/mach-ux500/pins.c
 create mode 100644 arch/arm/mach-ux500/pins.h

-- 
1.7.9.2


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 0/9] ux500/Nomadik GPIO and pins update
@ 2012-04-23  9:14 ` Linus Walleij
  0 siblings, 0 replies; 4+ messages in thread
From: Linus Walleij @ 2012-04-23  9:14 UTC (permalink / raw)
  To: linux-arm-kernel

From: Linus Walleij <linus.walleij@linaro.org>

This is basically an update and sync of Nomadik and ux500 GPIO
development.

If you wonder why I introduce a deviant pin configuration path
not using the pin config subsystem it is because I want to build
atop of this work which I know works. It will be switched over
to pinctrl in later patch sets on top of this.

This is *almost* orthogonal to other ux500 development, but
there *might* be conflicts with Lee Jones' Device Tree work,
so I will try to create a separate orthogonal ux500 GPIO branch
for this stuff.

Linus Walleij (4):
  gpio/nomadik: use typesafe __io_address()
  plat-nomadik: new sleep mode pincfg macros
  ARM: ux500: remove a bunch of internal pull-ups
  ARM: ux500: update pin handling

Rabin Vincent (5):
  gpio/nomadik: don't set SLPM to 1 for non-wakeup pins
  gpio/nomadik: cache [rf]w?imsc
  gpio/nomadik: fix spurious interrupts with SKE
  gpio/nomadik: support low EMI mode
  ARM: ux500: implement pin API

 arch/arm/mach-ux500/Makefile                      |    2 +-
 arch/arm/mach-ux500/board-mop500-pins.c           |  394 ++++++++++++++++-----
 arch/arm/mach-ux500/board-mop500.h                |    4 +
 arch/arm/mach-ux500/pins-db8500.h                 |   72 ++--
 arch/arm/mach-ux500/pins.c                        |   88 +++++
 arch/arm/mach-ux500/pins.h                        |   46 +++
 arch/arm/plat-nomadik/include/plat/gpio-nomadik.h |    1 +
 arch/arm/plat-nomadik/include/plat/pincfg.h       |   19 +
 drivers/gpio/gpio-nomadik.c                       |  129 +++++--
 9 files changed, 591 insertions(+), 164 deletions(-)
 create mode 100644 arch/arm/mach-ux500/pins.c
 create mode 100644 arch/arm/mach-ux500/pins.h

-- 
1.7.9.2

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH 0/9] ux500/Nomadik GPIO and pins update
  2012-04-23  9:14 ` Linus Walleij
@ 2012-05-17 23:38   ` Grant Likely
  -1 siblings, 0 replies; 4+ messages in thread
From: Grant Likely @ 2012-05-17 23:38 UTC (permalink / raw)
  To: Linus Walleij, linux-kernel, linux-arm-kernel
  Cc: Philippe LANGLAIS, Rabin Vincent, Jonas Aberg, Lee Jones, Linus Walleij

On Mon, 23 Apr 2012 11:14:00 +0200, Linus Walleij <linus.walleij@stericsson.com> wrote:
> From: Linus Walleij <linus.walleij@linaro.org>
> 
> This is basically an update and sync of Nomadik and ux500 GPIO
> development.
> 
> If you wonder why I introduce a deviant pin configuration path
> not using the pin config subsystem it is because I want to build
> atop of this work which I know works. It will be switched over
> to pinctrl in later patch sets on top of this.
> 
> This is *almost* orthogonal to other ux500 development, but
> there *might* be conflicts with Lee Jones' Device Tree work,
> so I will try to create a separate orthogonal ux500 GPIO branch
> for this stuff.
> 
> Linus Walleij (4):
>   gpio/nomadik: use typesafe __io_address()
>   plat-nomadik: new sleep mode pincfg macros
>   ARM: ux500: remove a bunch of internal pull-ups
>   ARM: ux500: update pin handling
> 
> Rabin Vincent (5):
>   gpio/nomadik: don't set SLPM to 1 for non-wakeup pins
>   gpio/nomadik: cache [rf]w?imsc
>   gpio/nomadik: fix spurious interrupts with SKE
>   gpio/nomadik: support low EMI mode
>   ARM: ux500: implement pin API

for the whole series:

Acked-by: Grant Likely <grant.likely@secretlab.ca>

g.

> 
>  arch/arm/mach-ux500/Makefile                      |    2 +-
>  arch/arm/mach-ux500/board-mop500-pins.c           |  394 ++++++++++++++++-----
>  arch/arm/mach-ux500/board-mop500.h                |    4 +
>  arch/arm/mach-ux500/pins-db8500.h                 |   72 ++--
>  arch/arm/mach-ux500/pins.c                        |   88 +++++
>  arch/arm/mach-ux500/pins.h                        |   46 +++
>  arch/arm/plat-nomadik/include/plat/gpio-nomadik.h |    1 +
>  arch/arm/plat-nomadik/include/plat/pincfg.h       |   19 +
>  drivers/gpio/gpio-nomadik.c                       |  129 +++++--
>  9 files changed, 591 insertions(+), 164 deletions(-)
>  create mode 100644 arch/arm/mach-ux500/pins.c
>  create mode 100644 arch/arm/mach-ux500/pins.h
> 
> -- 
> 1.7.9.2
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH 0/9] ux500/Nomadik GPIO and pins update
@ 2012-05-17 23:38   ` Grant Likely
  0 siblings, 0 replies; 4+ messages in thread
From: Grant Likely @ 2012-05-17 23:38 UTC (permalink / raw)
  To: linux-arm-kernel

On Mon, 23 Apr 2012 11:14:00 +0200, Linus Walleij <linus.walleij@stericsson.com> wrote:
> From: Linus Walleij <linus.walleij@linaro.org>
> 
> This is basically an update and sync of Nomadik and ux500 GPIO
> development.
> 
> If you wonder why I introduce a deviant pin configuration path
> not using the pin config subsystem it is because I want to build
> atop of this work which I know works. It will be switched over
> to pinctrl in later patch sets on top of this.
> 
> This is *almost* orthogonal to other ux500 development, but
> there *might* be conflicts with Lee Jones' Device Tree work,
> so I will try to create a separate orthogonal ux500 GPIO branch
> for this stuff.
> 
> Linus Walleij (4):
>   gpio/nomadik: use typesafe __io_address()
>   plat-nomadik: new sleep mode pincfg macros
>   ARM: ux500: remove a bunch of internal pull-ups
>   ARM: ux500: update pin handling
> 
> Rabin Vincent (5):
>   gpio/nomadik: don't set SLPM to 1 for non-wakeup pins
>   gpio/nomadik: cache [rf]w?imsc
>   gpio/nomadik: fix spurious interrupts with SKE
>   gpio/nomadik: support low EMI mode
>   ARM: ux500: implement pin API

for the whole series:

Acked-by: Grant Likely <grant.likely@secretlab.ca>

g.

> 
>  arch/arm/mach-ux500/Makefile                      |    2 +-
>  arch/arm/mach-ux500/board-mop500-pins.c           |  394 ++++++++++++++++-----
>  arch/arm/mach-ux500/board-mop500.h                |    4 +
>  arch/arm/mach-ux500/pins-db8500.h                 |   72 ++--
>  arch/arm/mach-ux500/pins.c                        |   88 +++++
>  arch/arm/mach-ux500/pins.h                        |   46 +++
>  arch/arm/plat-nomadik/include/plat/gpio-nomadik.h |    1 +
>  arch/arm/plat-nomadik/include/plat/pincfg.h       |   19 +
>  drivers/gpio/gpio-nomadik.c                       |  129 +++++--
>  9 files changed, 591 insertions(+), 164 deletions(-)
>  create mode 100644 arch/arm/mach-ux500/pins.c
>  create mode 100644 arch/arm/mach-ux500/pins.h
> 
> -- 
> 1.7.9.2
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2012-05-17 23:38 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-23  9:14 [PATCH 0/9] ux500/Nomadik GPIO and pins update Linus Walleij
2012-04-23  9:14 ` Linus Walleij
2012-05-17 23:38 ` Grant Likely
2012-05-17 23:38   ` Grant Likely

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.