* [refpolicy] [PATCH 1/3] Create non_auth_file_type attribute and interfaces
@ 2012-04-05 20:14 James Carter
2012-04-23 13:10 ` Christopher J. PeBenito
0 siblings, 1 reply; 3+ messages in thread
From: James Carter @ 2012-04-05 20:14 UTC (permalink / raw)
To: refpolicy
- Creates a new attribute called non_auth_file_type.
- Moves auth_file_type attribute declaration from authlogin to files.
- Creates new interfaces to allow file accesses on non_auth_file_type files.
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
---
policy/modules/kernel/files.if | 163 +++++++++++++++++++++++++++++++++++-
policy/modules/kernel/files.te | 6 ++
policy/modules/system/authlogin.te | 3 +-
3 files changed, 166 insertions(+), 6 deletions(-)
diff --git a/policy/modules/kernel/files.if b/policy/modules/kernel/files.if
index deb24b4..4570d1a 100644
--- a/policy/modules/kernel/files.if
+++ b/policy/modules/kernel/files.if
@@ -78,10 +78,30 @@
#
interface(`files_type',`
gen_require(`
- attribute file_type, non_security_file_type;
+ attribute file_type, non_security_file_type, non_auth_file_type;
')
- typeattribute $1 file_type, non_security_file_type;
+ typeattribute $1 file_type, non_security_file_type, non_auth_file_type;
+')
+
+########################################
+## <summary>
+## Mark the specified type as a file
+## that is related to authentication.
+## </summary>
+## <param name="file_type">
+## <summary>
+## Type of the authentication-related
+## file.
+## </summary>
+## </param>
+#
+interface(`files_auth_file',`
+ gen_require(`
+ attribute file_type, security_file_type, auth_file_type;
+ ')
+
+ typeattribute $1 file_type, security_file_type, auth_file_type;
')
########################################
@@ -99,10 +119,10 @@ interface(`files_type',`
#
interface(`files_security_file',`
gen_require(`
- attribute file_type, security_file_type;
+ attribute file_type, security_file_type, non_auth_file_type;
')
- typeattribute $1 file_type, security_file_type;
+ typeattribute $1 file_type, security_file_type, non_auth_file_type;
')
########################################
@@ -669,6 +689,63 @@ interface(`files_read_non_security_files',`
########################################
## <summary>
+## Read all non-authentication related
+## directories.
+## </summary>
+## <param name="domain">
+## <summary>
+## Domain allowed access.
+## </summary>
+## </param>
+#
+interface(`files_read_non_auth_dirs',`
+ gen_require(`
+ attribute non_auth_file_type;
+ ')
+
+ allow $1 non_auth_file_type:dir list_dir_perms;
+')
+
+########################################
+## <summary>
+## Read all non-authentication related
+## files.
+## </summary>
+## <param name="domain">
+## <summary>
+## Domain allowed access.
+## </summary>
+## </param>
+#
+interface(`files_read_non_auth_files',`
+ gen_require(`
+ attribute non_auth_file_type;
+ ')
+
+ read_files_pattern($1, non_auth_file_type, non_auth_file_type)
+')
+
+########################################
+## <summary>
+## Read all non-authentication related
+## symbolic links.
+## </summary>
+## <param name="domain">
+## <summary>
+## Domain allowed access.
+## </summary>
+## </param>
+#
+interface(`files_read_non_auth_symlinks',`
+ gen_require(`
+ attribute non_auth_file_type;
+ ')
+
+ read_lnk_files_pattern($1, non_auth_file_type, non_auth_file_type)
+')
+
+########################################
+## <summary>
## Read all directories on the filesystem, except
## the listed exceptions.
## </summary>
@@ -1026,6 +1103,38 @@ interface(`files_read_all_chr_files',`
########################################
## <summary>
+## Relabel all non-authentication related
+## files.
+## </summary>
+## <param name="domain">
+## <summary>
+## Domain allowed access.
+## </summary>
+## </param>
+## <rolecap/>
+#
+interface(`files_relabel_non_auth_files',`
+ gen_require(`
+ attribute non_auth_file_type;
+ ')
+
+ allow $1 non_auth_file_type:dir list_dir_perms;
+ relabel_dirs_pattern($1, non_auth_file_type, non_auth_file_type)
+ relabel_files_pattern($1, non_auth_file_type, non_auth_file_type)
+ relabel_lnk_files_pattern($1, non_auth_file_type, non_auth_file_type)
+ relabel_fifo_files_pattern($1, non_auth_file_type, non_auth_file_type)
+ relabel_sock_files_pattern($1, non_auth_file_type, non_auth_file_type)
+ # this is only relabelfrom since there should be no
+ # device nodes with file types.
+ relabelfrom_blk_files_pattern($1, non_auth_file_type, non_auth_file_type)
+ relabelfrom_chr_files_pattern($1, non_auth_file_type, non_auth_file_type)
+
+ # satisfy the assertions:
+ seutil_relabelto_bin_policy($1)
+')
+
+########################################
+## <summary>
## Relabel all files on the filesystem, except
## the listed exceptions.
## </summary>
@@ -1064,6 +1173,24 @@ interface(`files_relabel_all_files',`
########################################
## <summary>
+## rw non-authentication related files.
+## </summary>
+## <param name="domain">
+## <summary>
+## Domain allowed access.
+## </summary>
+## </param>
+#
+interface(`files_rw_non_auth_files',`
+ gen_require(`
+ attribute non_auth_file_type;
+ ')
+
+ rw_files_pattern($1, non_auth_file_type, non_auth_file_type)
+')
+
+########################################
+## <summary>
## rw all files on the filesystem, except
## the listed exceptions.
## </summary>
@@ -1090,6 +1217,34 @@ interface(`files_rw_all_files',`
########################################
## <summary>
+## Manage non-authentication related
+## files.
+## </summary>
+## <param name="domain">
+## <summary>
+## Domain allowed access.
+## </summary>
+## </param>
+## <rolecap/>
+#
+interface(`files_manage_non_auth_files',`
+ gen_require(`
+ attribute non_auth_file_type;
+ ')
+
+ manage_dirs_pattern($1, non_auth_file_type, non_auth_file_type)
+ manage_files_pattern($1, non_auth_file_type, non_auth_file_type)
+ manage_lnk_files_pattern($1, non_auth_file_type, non_auth_file_type)
+ manage_fifo_files_pattern($1, non_auth_file_type, non_auth_file_type)
+ manage_sock_files_pattern($1, non_auth_file_type, non_auth_file_type)
+
+ # satisfy the assertions:
+ seutil_create_bin_policy($1)
+ files_manage_kernel_modules($1)
+')
+
+########################################
+## <summary>
## Manage all files on the filesystem, except
## the listed exceptions.
## </summary>
diff --git a/policy/modules/kernel/files.te b/policy/modules/kernel/files.te
index 4dcef63..a587e87 100644
--- a/policy/modules/kernel/files.te
+++ b/policy/modules/kernel/files.te
@@ -29,6 +29,12 @@ attribute security_file_type;
# and its opposite
attribute non_security_file_type;
+# sensitive authentication files whose accesses should
+# not be dontaudited for uses
+attribute auth_file_type;
+# and its opposite
+attribute non_auth_file_type;
+
attribute tmpfile;
attribute tmpfsfile;
diff --git a/policy/modules/system/authlogin.te b/policy/modules/system/authlogin.te
index 01c7331..6a96393 100644
--- a/policy/modules/system/authlogin.te
+++ b/policy/modules/system/authlogin.te
@@ -5,7 +5,6 @@ policy_module(authlogin, 2.3.0)
# Declarations
#
-attribute auth_file_type;
attribute can_read_shadow_passwords;
attribute can_write_shadow_passwords;
attribute can_relabelto_shadow_passwords;
@@ -51,7 +50,7 @@ type pam_var_run_t;
files_pid_file(pam_var_run_t)
type shadow_t;
-auth_file(shadow_t)
+files_auth_file(shadow_t)
neverallow ~can_read_shadow_passwords shadow_t:file read;
neverallow ~can_write_shadow_passwords shadow_t:file { create write };
neverallow ~can_relabelto_shadow_passwords shadow_t:file relabelto;
--
1.7.7.6
^ permalink raw reply related [flat|nested] 3+ messages in thread* [refpolicy] [PATCH 1/3] Create non_auth_file_type attribute and interfaces
2012-04-05 20:14 [refpolicy] [PATCH 1/3] Create non_auth_file_type attribute and interfaces James Carter
@ 2012-04-23 13:10 ` Christopher J. PeBenito
2012-04-23 20:16 ` James Carter
0 siblings, 1 reply; 3+ messages in thread
From: Christopher J. PeBenito @ 2012-04-23 13:10 UTC (permalink / raw)
To: refpolicy
On 04/05/12 16:14, James Carter wrote:
> - Creates a new attribute called non_auth_file_type.
> - Moves auth_file_type attribute declaration from authlogin to files.
> - Creates new interfaces to allow file accesses on non_auth_file_type files.
I'm fine with the changes, though there are a couple things; see inline.
> Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
> ---
> policy/modules/kernel/files.if | 163 +++++++++++++++++++++++++++++++++++-
> policy/modules/kernel/files.te | 6 ++
> policy/modules/system/authlogin.te | 3 +-
> 3 files changed, 166 insertions(+), 6 deletions(-)
>
> diff --git a/policy/modules/kernel/files.if b/policy/modules/kernel/files.if
> index deb24b4..4570d1a 100644
> --- a/policy/modules/kernel/files.if
> +++ b/policy/modules/kernel/files.if
> @@ -78,10 +78,30 @@
> #
> interface(`files_type',`
> gen_require(`
> - attribute file_type, non_security_file_type;
> + attribute file_type, non_security_file_type, non_auth_file_type;
> ')
>
> - typeattribute $1 file_type, non_security_file_type;
> + typeattribute $1 file_type, non_security_file_type, non_auth_file_type;
> +')
> +
> +########################################
> +## <summary>
> +## Mark the specified type as a file
> +## that is related to authentication.
> +## </summary>
> +## <param name="file_type">
> +## <summary>
> +## Type of the authentication-related
> +## file.
There are some whitespace errors here and later in the patch.
> +## </summary>
> +## </param>
> +#
> +interface(`files_auth_file',`
> + gen_require(`
> + attribute file_type, security_file_type, auth_file_type;
> + ')
> +
> + typeattribute $1 file_type, security_file_type, auth_file_type;
> ')
>
> ########################################
> @@ -99,10 +119,10 @@ interface(`files_type',`
> #
> interface(`files_security_file',`
> gen_require(`
> - attribute file_type, security_file_type;
> + attribute file_type, security_file_type, non_auth_file_type;
> ')
>
> - typeattribute $1 file_type, security_file_type;
> + typeattribute $1 file_type, security_file_type, non_auth_file_type;
> ')
>
> ########################################
> @@ -669,6 +689,63 @@ interface(`files_read_non_security_files',`
The ordering in this file is messed up, so please don't follow it. Please collect all the interfaces your adding, and put the auth interfaces first, and then non_auth interfaces. Put all this after the interfaces that use the file_type attribute. In my checkout, thats line 1277 (above config file interfaces).
> ########################################
> ## <summary>
> +## Read all non-authentication related
> +## directories.
> +## </summary>
> +## <param name="domain">
> +## <summary>
> +## Domain allowed access.
> +## </summary>
> +## </param>
> +#
> +interface(`files_read_non_auth_dirs',`
The verb should be list, not read.
> + gen_require(`
> + attribute non_auth_file_type;
> + ')
> +
> + allow $1 non_auth_file_type:dir list_dir_perms;
> +')
> +
> +########################################
> +## <summary>
> +## Read all non-authentication related
> +## files.
> +## </summary>
> +## <param name="domain">
> +## <summary>
> +## Domain allowed access.
> +## </summary>
> +## </param>
> +#
> +interface(`files_read_non_auth_files',`
> + gen_require(`
> + attribute non_auth_file_type;
> + ')
> +
> + read_files_pattern($1, non_auth_file_type, non_auth_file_type)
> +')
> +
> +########################################
> +## <summary>
> +## Read all non-authentication related
> +## symbolic links.
> +## </summary>
> +## <param name="domain">
> +## <summary>
> +## Domain allowed access.
> +## </summary>
> +## </param>
> +#
> +interface(`files_read_non_auth_symlinks',`
> + gen_require(`
> + attribute non_auth_file_type;
> + ')
> +
> + read_lnk_files_pattern($1, non_auth_file_type, non_auth_file_type)
> +')
> +
> +########################################
> +## <summary>
> ## Read all directories on the filesystem, except
> ## the listed exceptions.
> ## </summary>
[...]
> diff --git a/policy/modules/system/authlogin.te b/policy/modules/system/authlogin.te
> index 01c7331..6a96393 100644
> --- a/policy/modules/system/authlogin.te
> +++ b/policy/modules/system/authlogin.te
> @@ -5,7 +5,6 @@ policy_module(authlogin, 2.3.0)
> # Declarations
> #
>
> -attribute auth_file_type;
> attribute can_read_shadow_passwords;
> attribute can_write_shadow_passwords;
> attribute can_relabelto_shadow_passwords;
> @@ -51,7 +50,7 @@ type pam_var_run_t;
> files_pid_file(pam_var_run_t)
>
> type shadow_t;
> -auth_file(shadow_t)
> +files_auth_file(shadow_t)
> neverallow ~can_read_shadow_passwords shadow_t:file read;
> neverallow ~can_write_shadow_passwords shadow_t:file { create write };
> neverallow ~can_relabelto_shadow_passwords shadow_t:file relabelto;
There needs to be some work in the authlogin.if. The interfaces that you're swapping in latter patches need to be deprecated (including auth_file()). Additionally, all the currently existing authlogin deprecated interfaces point to the interfaces you're deprecated (eg auth_read_all_files_except_shadow), so they need to be updated too.
The interfaces in files don't need to be deprecated now, though I may do it in the future.
--
Chris PeBenito
Tresys Technology, LLC
www.tresys.com | oss.tresys.com
^ permalink raw reply [flat|nested] 3+ messages in thread* [refpolicy] [PATCH 1/3] Create non_auth_file_type attribute and interfaces
2012-04-23 13:10 ` Christopher J. PeBenito
@ 2012-04-23 20:16 ` James Carter
0 siblings, 0 replies; 3+ messages in thread
From: James Carter @ 2012-04-23 20:16 UTC (permalink / raw)
To: refpolicy
On Mon, 2012-04-23 at 09:10 -0400, Christopher J. PeBenito wrote:
> On 04/05/12 16:14, James Carter wrote:
> > - Creates a new attribute called non_auth_file_type.
> > - Moves auth_file_type attribute declaration from authlogin to files.
> > - Creates new interfaces to allow file accesses on non_auth_file_type files.
>
> I'm fine with the changes, though there are a couple things; see inline.
>
> > Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
> > ---
> > policy/modules/kernel/files.if | 163 +++++++++++++++++++++++++++++++++++-
> > policy/modules/kernel/files.te | 6 ++
> > policy/modules/system/authlogin.te | 3 +-
> > 3 files changed, 166 insertions(+), 6 deletions(-)
> >
> > diff --git a/policy/modules/kernel/files.if b/policy/modules/kernel/files.if
> > index deb24b4..4570d1a 100644
> > --- a/policy/modules/kernel/files.if
> > +++ b/policy/modules/kernel/files.if
> > @@ -78,10 +78,30 @@
> > #
> > interface(`files_type',`
> > gen_require(`
> > - attribute file_type, non_security_file_type;
> > + attribute file_type, non_security_file_type, non_auth_file_type;
> > ')
> >
> > - typeattribute $1 file_type, non_security_file_type;
> > + typeattribute $1 file_type, non_security_file_type, non_auth_file_type;
> > +')
> > +
> > +########################################
> > +## <summary>
> > +## Mark the specified type as a file
> > +## that is related to authentication.
> > +## </summary>
> > +## <param name="file_type">
> > +## <summary>
> > +## Type of the authentication-related
> > +## file.
>
> There are some whitespace errors here and later in the patch.
>
Drat, I hate when I miss these.
> > +## </summary>
> > +## </param>
> > +#
> > +interface(`files_auth_file',`
> > + gen_require(`
> > + attribute file_type, security_file_type, auth_file_type;
> > + ')
> > +
> > + typeattribute $1 file_type, security_file_type, auth_file_type;
> > ')
> >
> > ########################################
> > @@ -99,10 +119,10 @@ interface(`files_type',`
> > #
> > interface(`files_security_file',`
> > gen_require(`
> > - attribute file_type, security_file_type;
> > + attribute file_type, security_file_type, non_auth_file_type;
> > ')
> >
> > - typeattribute $1 file_type, security_file_type;
> > + typeattribute $1 file_type, security_file_type, non_auth_file_type;
> > ')
> >
> > ########################################
> > @@ -669,6 +689,63 @@ interface(`files_read_non_security_files',`
>
> The ordering in this file is messed up, so please don't follow it. Please collect all the interfaces your adding, and put the auth interfaces first, and then non_auth interfaces. Put all this after the interfaces that use the file_type attribute. In my checkout, thats line 1277 (above config file interfaces).
>
Not a problem. There didn't seem to be any logic to how things were
ordered, so I expected that you would give direction.
> > ########################################
> > ## <summary>
> > +## Read all non-authentication related
> > +## directories.
> > +## </summary>
> > +## <param name="domain">
> > +## <summary>
> > +## Domain allowed access.
> > +## </summary>
> > +## </param>
> > +#
> > +interface(`files_read_non_auth_dirs',`
>
> The verb should be list, not read.
>
That name makes more sense.
> > + gen_require(`
> > + attribute non_auth_file_type;
> > + ')
> > +
> > + allow $1 non_auth_file_type:dir list_dir_perms;
> > +')
> > +
> > +########################################
> > +## <summary>
> > +## Read all non-authentication related
> > +## files.
> > +## </summary>
> > +## <param name="domain">
> > +## <summary>
> > +## Domain allowed access.
> > +## </summary>
> > +## </param>
> > +#
> > +interface(`files_read_non_auth_files',`
> > + gen_require(`
> > + attribute non_auth_file_type;
> > + ')
> > +
> > + read_files_pattern($1, non_auth_file_type, non_auth_file_type)
> > +')
> > +
> > +########################################
> > +## <summary>
> > +## Read all non-authentication related
> > +## symbolic links.
> > +## </summary>
> > +## <param name="domain">
> > +## <summary>
> > +## Domain allowed access.
> > +## </summary>
> > +## </param>
> > +#
> > +interface(`files_read_non_auth_symlinks',`
> > + gen_require(`
> > + attribute non_auth_file_type;
> > + ')
> > +
> > + read_lnk_files_pattern($1, non_auth_file_type, non_auth_file_type)
> > +')
> > +
> > +########################################
> > +## <summary>
> > ## Read all directories on the filesystem, except
> > ## the listed exceptions.
> > ## </summary>
> [...]
> > diff --git a/policy/modules/system/authlogin.te b/policy/modules/system/authlogin.te
> > index 01c7331..6a96393 100644
> > --- a/policy/modules/system/authlogin.te
> > +++ b/policy/modules/system/authlogin.te
> > @@ -5,7 +5,6 @@ policy_module(authlogin, 2.3.0)
> > # Declarations
> > #
> >
> > -attribute auth_file_type;
> > attribute can_read_shadow_passwords;
> > attribute can_write_shadow_passwords;
> > attribute can_relabelto_shadow_passwords;
> > @@ -51,7 +50,7 @@ type pam_var_run_t;
> > files_pid_file(pam_var_run_t)
> >
> > type shadow_t;
> > -auth_file(shadow_t)
> > +files_auth_file(shadow_t)
> > neverallow ~can_read_shadow_passwords shadow_t:file read;
> > neverallow ~can_write_shadow_passwords shadow_t:file { create write };
> > neverallow ~can_relabelto_shadow_passwords shadow_t:file relabelto;
>
> There needs to be some work in the authlogin.if. The interfaces that you're swapping in latter patches need to be deprecated (including auth_file()). Additionally, all the currently existing authlogin deprecated interfaces point to the interfaces you're deprecated (eg auth_read_all_files_except_shadow), so they need to be updated too.
>
> The interfaces in files don't need to be deprecated now, though I may do it in the future.
>
I wasn't sure what you would want done with authlogin.if, so I decided
that it was easier to do nothing. ;)
I will update the interfaces in authlogin.if to mark them as deprecated
and point them to the new interfaces.
Thanks,
--
James Carter <jwcart2@tycho.nsa.gov>
National Security Agency
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-04-23 20:16 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-05 20:14 [refpolicy] [PATCH 1/3] Create non_auth_file_type attribute and interfaces James Carter
2012-04-23 13:10 ` Christopher J. PeBenito
2012-04-23 20:16 ` James Carter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.