* [PATCH] target: Handle ATA_PASS_THROUGH_16 passthrough
@ 2012-05-16 5:33 mengcong
2012-05-16 7:38 ` James Bottomley
2012-05-16 23:41 ` [PATCH] " Nicholas A. Bellinger
0 siblings, 2 replies; 7+ messages in thread
From: mengcong @ 2012-05-16 5:33 UTC (permalink / raw)
To: target-devel
Cc: Nicholas A. Bellinger, linux-scsi, linux-kernel, Stefan Hajnoczi,
meng cong
The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs
with a SATA CD-ROM. This patch adds support to it so that PSCSI
CD-ROM passthrough works with the cdrecord.
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
---
drivers/target/target_core_transport.c | 30 ++++++++++++++++++++++++++++++
include/scsi/scsi.h | 1 +
2 files changed, 31 insertions(+), 0 deletions(-)
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 2d75c29..41439b3 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2926,6 +2926,36 @@ static int transport_generic_cmd_sequencer(
size = (cdb[7] << 8) | cdb[8];
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
break;
+ case ATA_PASS_THROUGH_16:
+ // T_LENGTH
+ switch (cdb[2] & 0x3) {
+ case 0x0:
+ sectors = 0;
+ break;
+ case 0x1:
+ sectors = (((cdb[1] & 0x1) ? cdb[3] : 0) << 8) | cdb[4];
+ break;
+ case 0x2:
+ sectors = (((cdb[1] & 0x1) ? cdb[5] : 0) << 8) | cdb[6];
+ break;
+ case 0x3:
+ pr_err("T_LENGTH=0x3 not supported\n");
+ goto out_invalid_cdb_field;
+ break;
+ }
+
+ // BYTE_BLOCK
+ if (cdb[2] & 0x4) {
+ // BLOCK
+ // T_TYPE: 512 or sector
+ size = sectors * ((cdb[2] & 0x10) ?
+ dev->se_sub_dev->se_dev_attrib.block_size : 512);
+ } else {
+ // BYTE
+ size = sectors;
+ }
+ cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ break;
default:
pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode"
" 0x%02x, sending CHECK_CONDITION.\n",
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index f34a5a8..f6dcd25 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -116,6 +116,7 @@ struct scsi_cmnd;
#define PERSISTENT_RESERVE_IN 0x5e
#define PERSISTENT_RESERVE_OUT 0x5f
#define VARIABLE_LENGTH_CMD 0x7f
+#define ATA_PASS_THROUGH_16 0x85
#define REPORT_LUNS 0xa0
#define SECURITY_PROTOCOL_IN 0xa2
#define MAINTENANCE_IN 0xa3
--
1.7.7
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH] target: Handle ATA_PASS_THROUGH_16 passthrough
2012-05-16 5:33 [PATCH] target: Handle ATA_PASS_THROUGH_16 passthrough mengcong
@ 2012-05-16 7:38 ` James Bottomley
2012-05-17 3:14 ` [PATCH] V2: " mengcong
2012-05-16 23:41 ` [PATCH] " Nicholas A. Bellinger
1 sibling, 1 reply; 7+ messages in thread
From: James Bottomley @ 2012-05-16 7:38 UTC (permalink / raw)
To: mc
Cc: target-devel, Nicholas A. Bellinger, linux-scsi, linux-kernel,
Stefan Hajnoczi
On Wed, 2012-05-16 at 13:33 +0800, mengcong wrote:
> The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs
> with a SATA CD-ROM. This patch adds support to it so that PSCSI
> CD-ROM passthrough works with the cdrecord.
>
> Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
> ---
[...]
> diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
> index f34a5a8..f6dcd25 100644
> --- a/include/scsi/scsi.h
> +++ b/include/scsi/scsi.h
> @@ -116,6 +116,7 @@ struct scsi_cmnd;
> #define PERSISTENT_RESERVE_IN 0x5e
> #define PERSISTENT_RESERVE_OUT 0x5f
> #define VARIABLE_LENGTH_CMD 0x7f
> +#define ATA_PASS_THROUGH_16 0x85
> #define REPORT_LUNS 0xa0
> #define SECURITY_PROTOCOL_IN 0xa2
> #define MAINTENANCE_IN 0xa3
We already have this: they're called ATA_16 (and ATA_12) in this very
file.
James
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] V2: target: Handle ATA_PASS_THROUGH_16 passthrough
2012-05-16 7:38 ` James Bottomley
@ 2012-05-17 3:14 ` mengcong
2012-05-17 6:13 ` Nicholas A. Bellinger
0 siblings, 1 reply; 7+ messages in thread
From: mengcong @ 2012-05-17 3:14 UTC (permalink / raw)
To: James Bottomley, target-devel
Cc: Nicholas A. Bellinger, linux-scsi, linux-kernel, Stefan Hajnoczi
The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs
with a SATA CD-ROM. This patch adds support to it so that PSCSI
CD-ROM passthrough works with the cdrecord.
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
---
drivers/target/target_core_transport.c | 30 ++++++++++++++++++++++++++++++
1 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 2d75c29..25e0fc0 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2926,6 +2926,36 @@ static int transport_generic_cmd_sequencer(
size = (cdb[7] << 8) | cdb[8];
cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
break;
+ case ATA_16:
+ // T_LENGTH
+ switch (cdb[2] & 0x3) {
+ case 0x0:
+ sectors = 0;
+ break;
+ case 0x1:
+ sectors = (((cdb[1] & 0x1) ? cdb[3] : 0) << 8) | cdb[4];
+ break;
+ case 0x2:
+ sectors = (((cdb[1] & 0x1) ? cdb[5] : 0) << 8) | cdb[6];
+ break;
+ case 0x3:
+ pr_err("T_LENGTH=0x3 not supported\n");
+ goto out_invalid_cdb_field;
+ break;
+ }
+
+ // BYTE_BLOCK
+ if (cdb[2] & 0x4) {
+ // BLOCK
+ // T_TYPE: 512 or sector
+ size = sectors * ((cdb[2] & 0x10) ?
+ dev->se_sub_dev->se_dev_attrib.block_size : 512);
+ } else {
+ // BYTE
+ size = sectors;
+ }
+ cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
+ break;
default:
pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode"
" 0x%02x, sending CHECK_CONDITION.\n",
--
1.7.7
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH] V2: target: Handle ATA_PASS_THROUGH_16 passthrough
2012-05-17 3:14 ` [PATCH] V2: " mengcong
@ 2012-05-17 6:13 ` Nicholas A. Bellinger
2012-05-17 6:32 ` mengcong
0 siblings, 1 reply; 7+ messages in thread
From: Nicholas A. Bellinger @ 2012-05-17 6:13 UTC (permalink / raw)
To: mc
Cc: James Bottomley, target-devel, linux-scsi, linux-kernel, Stefan Hajnoczi
On Thu, 2012-05-17 at 11:14 +0800, mengcong wrote:
> The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs
> with a SATA CD-ROM. This patch adds support to it so that PSCSI
> CD-ROM passthrough works with the cdrecord.
>
> Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
> ---
> drivers/target/target_core_transport.c | 30 ++++++++++++++++++++++++++++++
> 1 files changed, 30 insertions(+), 0 deletions(-)
>
Ok, I've added the extra !passthrough check to enforce pSCSI backends
only usage + /* ... */ style comments changes mentioned as feedback you
missed in the last mail. (That's OK this time, but please don't get
into the habit of ignoring patch feedback..)
So committed into lio-core.git, and queuing shortly into
target-pending/for-next to be picked up for tomorrow's linux-next build.
Thanks for your patch MC!
--nab
> diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
> index 2d75c29..25e0fc0 100644
> --- a/drivers/target/target_core_transport.c
> +++ b/drivers/target/target_core_transport.c
> @@ -2926,6 +2926,36 @@ static int transport_generic_cmd_sequencer(
> size = (cdb[7] << 8) | cdb[8];
> cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
> break;
> + case ATA_16:
> + // T_LENGTH
> + switch (cdb[2] & 0x3) {
> + case 0x0:
> + sectors = 0;
> + break;
> + case 0x1:
> + sectors = (((cdb[1] & 0x1) ? cdb[3] : 0) << 8) | cdb[4];
> + break;
> + case 0x2:
> + sectors = (((cdb[1] & 0x1) ? cdb[5] : 0) << 8) | cdb[6];
> + break;
> + case 0x3:
> + pr_err("T_LENGTH=0x3 not supported\n");
> + goto out_invalid_cdb_field;
> + break;
> + }
> +
> + // BYTE_BLOCK
> + if (cdb[2] & 0x4) {
> + // BLOCK
> + // T_TYPE: 512 or sector
> + size = sectors * ((cdb[2] & 0x10) ?
> + dev->se_sub_dev->se_dev_attrib.block_size : 512);
> + } else {
> + // BYTE
> + size = sectors;
> + }
> + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
> + break;
> default:
> pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode"
> " 0x%02x, sending CHECK_CONDITION.\n",
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] V2: target: Handle ATA_PASS_THROUGH_16 passthrough
2012-05-17 6:13 ` Nicholas A. Bellinger
@ 2012-05-17 6:32 ` mengcong
0 siblings, 0 replies; 7+ messages in thread
From: mengcong @ 2012-05-17 6:32 UTC (permalink / raw)
To: Nicholas A. Bellinger
Cc: James Bottomley, target-devel, linux-scsi, linux-kernel, Stefan Hajnoczi
On Wed, 2012-05-16 at 23:13 -0700, Nicholas A. Bellinger wrote:
> On Thu, 2012-05-17 at 11:14 +0800, mengcong wrote:
> > The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs
> > with a SATA CD-ROM. This patch adds support to it so that PSCSI
> > CD-ROM passthrough works with the cdrecord.
> >
> > Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
> > ---
> > drivers/target/target_core_transport.c | 30 ++++++++++++++++++++++++++++++
> > 1 files changed, 30 insertions(+), 0 deletions(-)
> >
>
> Ok, I've added the extra !passthrough check to enforce pSCSI backends
> only usage + /* ... */ style comments changes mentioned as feedback you
> missed in the last mail. (That's OK this time, but please don't get
> into the habit of ignoring patch feedback..)
Sorry to the ignoreance of the feedback. My client gets new mail with
problem sometimes.
About the passthrough check, I explains in my last mail.
Thanks.
mc.
>
> So committed into lio-core.git, and queuing shortly into
> target-pending/for-next to be picked up for tomorrow's linux-next build.
>
> Thanks for your patch MC!
>
> --nab
>
> > diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
> > index 2d75c29..25e0fc0 100644
> > --- a/drivers/target/target_core_transport.c
> > +++ b/drivers/target/target_core_transport.c
> > @@ -2926,6 +2926,36 @@ static int transport_generic_cmd_sequencer(
> > size = (cdb[7] << 8) | cdb[8];
> > cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
> > break;
> > + case ATA_16:
> > + // T_LENGTH
> > + switch (cdb[2] & 0x3) {
> > + case 0x0:
> > + sectors = 0;
> > + break;
> > + case 0x1:
> > + sectors = (((cdb[1] & 0x1) ? cdb[3] : 0) << 8) | cdb[4];
> > + break;
> > + case 0x2:
> > + sectors = (((cdb[1] & 0x1) ? cdb[5] : 0) << 8) | cdb[6];
> > + break;
> > + case 0x3:
> > + pr_err("T_LENGTH=0x3 not supported\n");
> > + goto out_invalid_cdb_field;
> > + break;
> > + }
> > +
> > + // BYTE_BLOCK
> > + if (cdb[2] & 0x4) {
> > + // BLOCK
> > + // T_TYPE: 512 or sector
> > + size = sectors * ((cdb[2] & 0x10) ?
> > + dev->se_sub_dev->se_dev_attrib.block_size : 512);
> > + } else {
> > + // BYTE
> > + size = sectors;
> > + }
> > + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
> > + break;
> > default:
> > pr_warn("TARGET_CORE[%s]: Unsupported SCSI Opcode"
> > " 0x%02x, sending CHECK_CONDITION.\n",
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] target: Handle ATA_PASS_THROUGH_16 passthrough
2012-05-16 5:33 [PATCH] target: Handle ATA_PASS_THROUGH_16 passthrough mengcong
2012-05-16 7:38 ` James Bottomley
@ 2012-05-16 23:41 ` Nicholas A. Bellinger
2012-05-17 6:22 ` mengcong
1 sibling, 1 reply; 7+ messages in thread
From: Nicholas A. Bellinger @ 2012-05-16 23:41 UTC (permalink / raw)
To: mc
Cc: target-devel, linux-scsi, linux-kernel, Stefan Hajnoczi, James Bottomley
On Wed, 2012-05-16 at 13:33 +0800, mengcong wrote:
> The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs
> with a SATA CD-ROM. This patch adds support to it so that PSCSI
> CD-ROM passthrough works with the cdrecord.
>
> Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
> ---
> drivers/target/target_core_transport.c | 30 ++++++++++++++++++++++++++++++
> include/scsi/scsi.h | 1 +
> 2 files changed, 31 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
> index 2d75c29..41439b3 100644
> --- a/drivers/target/target_core_transport.c
> +++ b/drivers/target/target_core_transport.c
> @@ -2926,6 +2926,36 @@ static int transport_generic_cmd_sequencer(
> size = (cdb[7] << 8) | cdb[8];
> cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
> break;
> + case ATA_PASS_THROUGH_16:
> + // T_LENGTH
> + switch (cdb[2] & 0x3) {
> + case 0x0:
> + sectors = 0;
> + break;
> + case 0x1:
> + sectors = (((cdb[1] & 0x1) ? cdb[3] : 0) << 8) | cdb[4];
> + break;
> + case 0x2:
> + sectors = (((cdb[1] & 0x1) ? cdb[5] : 0) << 8) | cdb[6];
> + break;
> + case 0x3:
> + pr_err("T_LENGTH=0x3 not supported\n");
> + goto out_invalid_cdb_field;
> + break;
> + }
> +
> + // BYTE_BLOCK
> + if (cdb[2] & 0x4) {
> + // BLOCK
> + // T_TYPE: 512 or sector
> + size = sectors * ((cdb[2] & 0x10) ?
> + dev->se_sub_dev->se_dev_attrib.block_size : 512);
> + } else {
> + // BYTE
> + size = sectors;
> + }
> + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
Mmmm, I think using SCF_SCSI_CONTROL_SG_IO_CDB here for all ATA
passthrough cases should be OK with pSCSI, but you'll want to fail this
type of cdb when if (!passthrough) for non pSCSI type devices to be safe
with virtual backends..
Also just an FYI, checkpatch.pl will complain here using '//' style
comments, so you'll want to always use '/* ... */' style comments when
submitting a target patch.
So please go ahead and fix up these two bits + use ATA_16 following
jejb's comment, and I'm fine with including your v2 into the for-3.5
target queue..
Thanks!
--nab
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] target: Handle ATA_PASS_THROUGH_16 passthrough
2012-05-16 23:41 ` [PATCH] " Nicholas A. Bellinger
@ 2012-05-17 6:22 ` mengcong
0 siblings, 0 replies; 7+ messages in thread
From: mengcong @ 2012-05-17 6:22 UTC (permalink / raw)
To: Nicholas A. Bellinger
Cc: target-devel, linux-scsi, linux-kernel, Stefan Hajnoczi, James Bottomley
On Wed, 2012-05-16 at 16:41 -0700, Nicholas A. Bellinger wrote:
> On Wed, 2012-05-16 at 13:33 +0800, mengcong wrote:
> > The cdrecord uses ATA_PASS_THROUGH_16 command while burning CDs
> > with a SATA CD-ROM. This patch adds support to it so that PSCSI
> > CD-ROM passthrough works with the cdrecord.
> >
> > Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
> > ---
> > drivers/target/target_core_transport.c | 30 ++++++++++++++++++++++++++++++
> > include/scsi/scsi.h | 1 +
> > 2 files changed, 31 insertions(+), 0 deletions(-)
> >
> > diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
> > index 2d75c29..41439b3 100644
> > --- a/drivers/target/target_core_transport.c
> > +++ b/drivers/target/target_core_transport.c
> > @@ -2926,6 +2926,36 @@ static int transport_generic_cmd_sequencer(
> > size = (cdb[7] << 8) | cdb[8];
> > cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
> > break;
> > + case ATA_PASS_THROUGH_16:
> > + // T_LENGTH
> > + switch (cdb[2] & 0x3) {
> > + case 0x0:
> > + sectors = 0;
> > + break;
> > + case 0x1:
> > + sectors = (((cdb[1] & 0x1) ? cdb[3] : 0) << 8) | cdb[4];
> > + break;
> > + case 0x2:
> > + sectors = (((cdb[1] & 0x1) ? cdb[5] : 0) << 8) | cdb[6];
> > + break;
> > + case 0x3:
> > + pr_err("T_LENGTH=0x3 not supported\n");
> > + goto out_invalid_cdb_field;
> > + break;
> > + }
> > +
> > + // BYTE_BLOCK
> > + if (cdb[2] & 0x4) {
> > + // BLOCK
> > + // T_TYPE: 512 or sector
> > + size = sectors * ((cdb[2] & 0x10) ?
> > + dev->se_sub_dev->se_dev_attrib.block_size : 512);
> > + } else {
> > + // BYTE
> > + size = sectors;
> > + }
> > + cmd->se_cmd_flags |= SCF_SCSI_CONTROL_SG_IO_CDB;
>
> Mmmm, I think using SCF_SCSI_CONTROL_SG_IO_CDB here for all ATA
> passthrough cases should be OK with pSCSI, but you'll want to fail this
> type of cdb when if (!passthrough) for non pSCSI type devices to be safe
> with virtual backends..
(passthrough) has made sure the backend is non-virtual already.
As I doesn't set cmd->execute_task and SCF_SCSI_DATA_SG_IO_CDB flag, so
the below piece of code should guarantee that my patch only works with
pSCSI, at least, currently. Is it right?
---
passthrough =
(dev->transport->transport_type == TRANSPORT_PLUGIN_PHBA_PDEV);
...
if (!(passthrough || cmd->execute_task ||
(cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)))
goto out_unsupported_cdb;
---
>
> Also just an FYI, checkpatch.pl will complain here using '//' style
> comments, so you'll want to always use '/* ... */' style comments when
> submitting a target patch.
Sure, I will change it.
Thanks.
mc
>
> So please go ahead and fix up these two bits + use ATA_16 following
> jejb's comment, and I'm fine with including your v2 into the for-3.5
> target queue..
>
> Thanks!
>
> --nab
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-05-17 7:09 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-16 5:33 [PATCH] target: Handle ATA_PASS_THROUGH_16 passthrough mengcong
2012-05-16 7:38 ` James Bottomley
2012-05-17 3:14 ` [PATCH] V2: " mengcong
2012-05-17 6:13 ` Nicholas A. Bellinger
2012-05-17 6:32 ` mengcong
2012-05-16 23:41 ` [PATCH] " Nicholas A. Bellinger
2012-05-17 6:22 ` mengcong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.