[U-Boot] [PATCH v2 0/3] USB and cache related fixes

[Tom Rini <trini@ti.com>]

Hey all,

In commit b8adb12 the cache flushing behavior was changed for the EHCI
stack.  This change showed a few different problems on TI platforms (where
our cacheline size is 64 not 32).  First, the dcache_off call that
ehci-omap had been doing was now not happening soon enough to paper over
the cache issues.  This call is removed in patch 1.  Second, when we have
dcache support compiled in but turned off via 'dcache off' the cache
routines spam the console about alignment issues when a cache flush is
attempted.  This is a problem in that it makes operations extremely slow
(as we're spending all our time spitting messages to console).  The second
patch makes the flush routines return when the dcache is off.  The last
patch deal with the same problem, for EHCI and for MUSB.  The USB spec
says that 32 bytes is the minimum alignment but we need larger alignment
when the cache is larger.  Note that we can't use MAX() here as gcc doesn't
allow that expansion inside of align(..).

Tested on omap3_beagle (which was previously broken) and a MAKEALL -a arm
looks good too.

Changes in v2:
- Condense last two patches into one that puts the test into <usb.h>

-- 
Tom