* [PATCH] iio: remove SENSORS_ from Kconfig
@ 2012-06-17 13:20 Peter Meerwald
2012-07-08 17:05 ` Jonathan Cameron
0 siblings, 1 reply; 3+ messages in thread
From: Peter Meerwald @ 2012-06-17 13:20 UTC (permalink / raw)
To: linux-iio; +Cc: Peter Meerwald
IIO sensors are not supposed to be prefixed SENSORS_, cleanup for
consistency
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
---
drivers/iio/light/Kconfig | 2 +-
drivers/iio/light/Makefile | 2 +-
drivers/staging/iio/light/Kconfig | 6 +++---
drivers/staging/iio/light/Makefile | 6 +++---
drivers/staging/iio/magnetometer/Kconfig | 4 ++--
drivers/staging/iio/magnetometer/Makefile | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index f3ea90d..8bc9675 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -3,7 +3,7 @@
#
menu "Light sensors"
-config SENSORS_LM3533
+config LM3533
tristate "LM3533 ambient light sensor"
depends on MFD_LM3533
help
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 06fa4d3..5ae2737 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -2,5 +2,5 @@
# Makefile for IIO Light sensors
#
-obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
+obj-$(CONFIG_LM3533) += lm3533-als.o
obj-$(CONFIG_VCNL4000) += vcnl4000.o
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index 4bed30e..0f251e4 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -3,7 +3,7 @@
#
menu "Light sensors"
-config SENSORS_ISL29018
+config ISL29018
tristate "ISL 29018 light and proximity sensor"
depends on I2C
select REGMAP_I2C
@@ -15,7 +15,7 @@ config SENSORS_ISL29018
in lux, proximity infrared sensing and normal infrared sensing.
Data from sensor is accessible via sysfs.
-config SENSORS_ISL29028
+config ISL29028
tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
depends on I2C
select REGMAP_I2C
@@ -25,7 +25,7 @@ config SENSORS_ISL29028
Proximity value via iio. The ISL29028 provides the concurrent sensing
of ambient light and proximity.
-config SENSORS_TSL2563
+config TSL2563
tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
depends on I2C
help
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 141af1e..d718a07 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -2,8 +2,8 @@
# Makefile for industrial I/O Light sensors
#
-obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
-obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
-obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
+obj-$(CONFIG_TSL2563) += tsl2563.o
+obj-$(CONFIG_ISL29018) += isl29018.o
+obj-$(CONFIG_ISL29028) += isl29028.o
obj-$(CONFIG_TSL2583) += tsl2583.o
obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o
diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
index df5e0d4..84a6c0f 100644
--- a/drivers/staging/iio/magnetometer/Kconfig
+++ b/drivers/staging/iio/magnetometer/Kconfig
@@ -3,7 +3,7 @@
#
menu "Magnetometer sensors"
-config SENSORS_AK8975
+config AK8975
tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
depends on I2C
depends on GPIOLIB
@@ -14,7 +14,7 @@ config SENSORS_AK8975
To compile this driver as a module, choose M here: the module
will be called ak8975.
-config SENSORS_HMC5843
+config HMC5843
tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
depends on I2C
help
diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile
index f2a753f..79331bb 100644
--- a/drivers/staging/iio/magnetometer/Makefile
+++ b/drivers/staging/iio/magnetometer/Makefile
@@ -2,5 +2,5 @@
# Makefile for industrial I/O Magnetometer sensors
#
-obj-$(CONFIG_SENSORS_AK8975) += ak8975.o
-obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o
+obj-$(CONFIG_AK8975) += ak8975.o
+obj-$(CONFIG_HMC5843) += hmc5843.o
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] iio: remove SENSORS_ from Kconfig
2012-06-17 13:20 [PATCH] iio: remove SENSORS_ from Kconfig Peter Meerwald
@ 2012-07-08 17:05 ` Jonathan Cameron
2012-07-08 18:37 ` Peter Meerwald
0 siblings, 1 reply; 3+ messages in thread
From: Jonathan Cameron @ 2012-07-08 17:05 UTC (permalink / raw)
To: Peter Meerwald; +Cc: linux-iio
On 06/17/2012 02:20 PM, Peter Meerwald wrote:
> IIO sensors are not supposed to be prefixed SENSORS_, cleanup for
> consistency
Hi Peter,
I held off on this one as it may cause some issues with peoples
defconfigs. It's a question of whether we really care...
I was hoping we'd get a few more opinions.
Anyone care either way?
>
> Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
> ---
> drivers/iio/light/Kconfig | 2 +-
> drivers/iio/light/Makefile | 2 +-
> drivers/staging/iio/light/Kconfig | 6 +++---
> drivers/staging/iio/light/Makefile | 6 +++---
> drivers/staging/iio/magnetometer/Kconfig | 4 ++--
> drivers/staging/iio/magnetometer/Makefile | 4 ++--
> 6 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index f3ea90d..8bc9675 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Light sensors"
>
> -config SENSORS_LM3533
> +config LM3533
> tristate "LM3533 ambient light sensor"
> depends on MFD_LM3533
> help
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 06fa4d3..5ae2737 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -2,5 +2,5 @@
> # Makefile for IIO Light sensors
> #
>
> -obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
> +obj-$(CONFIG_LM3533) += lm3533-als.o
> obj-$(CONFIG_VCNL4000) += vcnl4000.o
> diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
> index 4bed30e..0f251e4 100644
> --- a/drivers/staging/iio/light/Kconfig
> +++ b/drivers/staging/iio/light/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Light sensors"
>
> -config SENSORS_ISL29018
> +config ISL29018
> tristate "ISL 29018 light and proximity sensor"
> depends on I2C
> select REGMAP_I2C
> @@ -15,7 +15,7 @@ config SENSORS_ISL29018
> in lux, proximity infrared sensing and normal infrared sensing.
> Data from sensor is accessible via sysfs.
>
> -config SENSORS_ISL29028
> +config ISL29028
> tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
> depends on I2C
> select REGMAP_I2C
> @@ -25,7 +25,7 @@ config SENSORS_ISL29028
> Proximity value via iio. The ISL29028 provides the concurrent sensing
> of ambient light and proximity.
>
> -config SENSORS_TSL2563
> +config TSL2563
> tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
> depends on I2C
> help
> diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
> index 141af1e..d718a07 100644
> --- a/drivers/staging/iio/light/Makefile
> +++ b/drivers/staging/iio/light/Makefile
> @@ -2,8 +2,8 @@
> # Makefile for industrial I/O Light sensors
> #
>
> -obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o
> -obj-$(CONFIG_SENSORS_ISL29018) += isl29018.o
> -obj-$(CONFIG_SENSORS_ISL29028) += isl29028.o
> +obj-$(CONFIG_TSL2563) += tsl2563.o
> +obj-$(CONFIG_ISL29018) += isl29018.o
> +obj-$(CONFIG_ISL29028) += isl29028.o
> obj-$(CONFIG_TSL2583) += tsl2583.o
> obj-$(CONFIG_TSL2x7x) += tsl2x7x_core.o
> diff --git a/drivers/staging/iio/magnetometer/Kconfig b/drivers/staging/iio/magnetometer/Kconfig
> index df5e0d4..84a6c0f 100644
> --- a/drivers/staging/iio/magnetometer/Kconfig
> +++ b/drivers/staging/iio/magnetometer/Kconfig
> @@ -3,7 +3,7 @@
> #
> menu "Magnetometer sensors"
>
> -config SENSORS_AK8975
> +config AK8975
> tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
> depends on I2C
> depends on GPIOLIB
> @@ -14,7 +14,7 @@ config SENSORS_AK8975
> To compile this driver as a module, choose M here: the module
> will be called ak8975.
>
> -config SENSORS_HMC5843
> +config HMC5843
> tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer"
> depends on I2C
> help
> diff --git a/drivers/staging/iio/magnetometer/Makefile b/drivers/staging/iio/magnetometer/Makefile
> index f2a753f..79331bb 100644
> --- a/drivers/staging/iio/magnetometer/Makefile
> +++ b/drivers/staging/iio/magnetometer/Makefile
> @@ -2,5 +2,5 @@
> # Makefile for industrial I/O Magnetometer sensors
> #
>
> -obj-$(CONFIG_SENSORS_AK8975) += ak8975.o
> -obj-$(CONFIG_SENSORS_HMC5843) += hmc5843.o
> +obj-$(CONFIG_AK8975) += ak8975.o
> +obj-$(CONFIG_HMC5843) += hmc5843.o
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] iio: remove SENSORS_ from Kconfig
2012-07-08 17:05 ` Jonathan Cameron
@ 2012-07-08 18:37 ` Peter Meerwald
0 siblings, 0 replies; 3+ messages in thread
From: Peter Meerwald @ 2012-07-08 18:37 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
> > IIO sensors are not supposed to be prefixed SENSORS_, cleanup for
> > consistency
> I held off on this one as it may cause some issues with peoples
> defconfigs. It's a question of whether we really care...
> I was hoping we'd get a few more opinions.
the time is now if we strive for consistency
p.
--
Peter Meerwald
+43-664-2444418 (mobile)
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-07-08 18:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-17 13:20 [PATCH] iio: remove SENSORS_ from Kconfig Peter Meerwald
2012-07-08 17:05 ` Jonathan Cameron
2012-07-08 18:37 ` Peter Meerwald
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.