[ 00/69] 3.2.21-stable review

[ 00/69] 3.2.21-stable review

[Ben Hutchings]

This is the start of the stable review cycle for the 3.2.21 release.
There are 69 patches in this series, which will be posted as responses
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Tue Jun 19 21:00:00 UTC 2012.
Anything received after that time might be too late.

A combined patch relative to 3.2.20 will be posted as an additional
response to this, and the diffstat can be found below.

Ben.

-------------
 Makefile                                      |    4 +-
 arch/arm/mach-imx/hotplug.c                   |   42 +++++++++-
 arch/arm/mach-imx/mach-mx21ads.c              |    2 +-
 arch/arm/mach-mx5/crm_regs.h                  |    2 +-
 arch/powerpc/kernel/module_32.c               |   11 ++-
 arch/x86/crypto/aesni-intel_asm.S             |    6 +-
 arch/x86/include/asm/uv/uv_bau.h              |    1 -
 arch/x86/kernel/cpu/amd.c                     |   18 +++++
 arch/x86/kernel/cpu/mcheck/mce_amd.c          |   55 ++++++++++---
 arch/x86/platform/uv/tlb_uv.c                 |    1 -
 arch/x86/xen/enlighten.c                      |    8 ++
 drivers/char/agp/intel-agp.c                  |    1 +
 drivers/char/agp/intel-agp.h                  |    1 +
 drivers/char/hw_random/atmel-rng.c            |    7 ++
 drivers/gpu/drm/i915/i915_drv.c               |    6 +-
 drivers/gpu/drm/i915/i915_drv.h               |    3 +
 drivers/gpu/drm/i915/i915_reg.h               |    8 ++
 drivers/gpu/drm/i915/intel_display.c          |   69 ++++++++++++----
 drivers/gpu/drm/i915/intel_ringbuffer.c       |   20 ++++-
 drivers/gpu/drm/nouveau/nouveau_connector.c   |   55 +++++++++++++
 drivers/gpu/drm/radeon/evergreen.c            |    3 +
 drivers/gpu/drm/radeon/evergreend.h           |    1 +
 drivers/gpu/drm/radeon/r600.c                 |    1 +
 drivers/gpu/drm/radeon/r600d.h                |    1 +
 drivers/gpu/drm/radeon/rv770.c                |    5 +-
 drivers/gpu/drm/radeon/rv770d.h               |    3 +
 drivers/hwmon/fam15h_power.c                  |    8 +-
 drivers/net/can/c_can/c_can.c                 |   16 ++--
 drivers/net/can/c_can/c_can.h                 |    1 +
 drivers/net/usb/sierra_net.c                  |   14 +++-
 drivers/net/wireless/iwlwifi/iwl-6000.c       |   22 +++++-
 drivers/net/wireless/iwlwifi/iwl-agn-sta.c    |    2 +-
 drivers/net/wireless/iwlwifi/iwl-agn.c        |    3 +
 drivers/net/wireless/iwlwifi/iwl-prph.h       |    1 +
 drivers/net/wireless/iwlwifi/iwl-trans-pcie.c |    5 ++
 drivers/net/wireless/rt2x00/rt2x00.h          |    3 +-
 drivers/net/wireless/rt2x00/rt2x00mac.c       |    1 -
 drivers/net/wireless/rt2x00/rt2x00queue.c     |   13 ++-
 drivers/pci/pci.c                             |    5 ++
 drivers/pci/quirks.c                          |   26 ++++++
 drivers/scsi/mpt2sas/mpt2sas_base.c           |    2 +-
 drivers/target/target_core_alua.c             |    8 +-
 drivers/usb/class/cdc-acm.c                   |    8 ++
 drivers/usb/class/cdc-wdm.c                   |   25 ++++++
 drivers/usb/core/hcd-pci.c                    |    9 ---
 drivers/usb/core/message.c                    |    3 +-
 drivers/usb/host/ehci-hcd.c                   |    3 +
 drivers/usb/host/ehci-pci.c                   |    8 --
 drivers/usb/host/xhci-mem.c                   |   74 ++++++-----------
 drivers/usb/host/xhci.c                       |    8 +-
 drivers/usb/musb/musb_gadget.c                |    1 +
 drivers/usb/serial/cp210x.c                   |    1 +
 drivers/usb/serial/ftdi_sio.c                 |    1 +
 drivers/usb/serial/ftdi_sio_ids.h             |    1 +
 drivers/usb/serial/mct_u232.c                 |   13 +--
 drivers/usb/serial/option.c                   |   96 +++++++++++-----------
 drivers/usb/serial/qcserial.c                 |    6 ++
 drivers/usb/serial/sierra.c                   |    4 +
 drivers/usb/serial/usb-serial.c               |    6 +-
 drivers/usb/storage/unusual_devs.h            |    7 ++
 fs/fuse/dir.c                                 |    1 +
 fs/fuse/fuse_i.h                              |    3 +
 fs/fuse/inode.c                               |   17 +++-
 fs/nfs/nfs4proc.c                             |    1 +
 include/linux/pci.h                           |    2 +
 include/linux/swapops.h                       |    8 +-
 include/linux/usb/hcd.h                       |    2 -
 kernel/sched.c                                |    9 +--
 mm/swapfile.c                                 |   12 +--
 net/mac80211/iface.c                          |   12 +++
 net/mac80211/offchannel.c                     |   16 ++++
 net/sunrpc/svc.c                              |    3 +-
 net/wireless/util.c                           |   19 ++++-
 sound/pci/hda/hda_codec.h                     |    1 +
 sound/pci/hda/hda_local.h                     |    2 +
 sound/pci/hda/patch_realtek.c                 |   52 ++++++++++--
 sound/soc/codecs/wm8994.c                     |  105 ++++++++++++++++---------
 77 files changed, 728 insertions(+), 275 deletions(-)

-- 
Ben Hutchings
Time is nature's way of making sure that everything doesn't happen at once.

[ 01/69] drm/i915: Mark the ringbuffers as being in the GTT domain

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 3eef8918ff440837f6af791942d8dd07e1a268ee upstream.

By correctly describing the rinbuffers as being in the GTT domain, it
appears that we are more careful with the management of the CPU cache
upon resume and so prevent some coherency issue when submitting commands
to the GPU later. A secondary effect is that the debug logs are then
consistent with the actual usage (i.e. they no longer describe the
ringbuffers as being in the CPU write domain when we are accessing them
through an wc iomapping.)

Reported-and-tested-by: Daniel Gnoutcheff <daniel@gnoutcheff.name>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41092
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1045,6 +1045,10 @@
 	if (ret)
 		goto err_unref;
 
+	ret = i915_gem_object_set_to_gtt_domain(obj, true);
+	if (ret)
+		goto err_unpin;
+
 	ring->map.size = ring->size;
 	ring->map.offset = dev->agp->base + obj->gtt_offset;
 	ring->map.type = 0;

[ 02/69] drm/i915: hold forcewake around ring hw init

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit b7884eb45ec98c0d34c7f49005ae9d4b4b4e38f6 upstream.

Empirical evidence suggests that we need to: On at least one ivb
machine when running the hangman i-g-t test, the rings don't properly
initialize properly - the RING_START registers seems to be stuck at
all zeros.

Holding forcewake around this register init sequences makes chip reset
reliable again. Note that this is not the first such issue:

commit f01db988ef6f6c70a6cc36ee71e4a98a68901229
Author: Sean Paul <seanpaul@chromium.org>
Date:   Fri Mar 16 12:43:22 2012 -0400

    drm/i915: Add wait_for in init_ring_common

added delay loops to make RING_START and RING_CTL initialization
reliable on the blt ring at boot-up. So I guess it won't hurt if we do
this unconditionally for all force_wake needing gpus.

To avoid copy&pasting of the HAS_FORCE_WAKE check I've added a new
intel_info bit for that.

v2: Fixup missing commas in static struct and properly handling the
error case in init_ring_common, both noticed by Jani Nikula.

Reported-and-tested-by: Yang Guang <guang.a.yang@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2:
 - drop changes to Haswell device information
 - NEEDS_FORCE_WAKE didn't refer to Valley View anyway]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -214,6 +214,7 @@
 	.need_gfx_hws = 1, .has_hotplug = 1,
 	.has_bsd_ring = 1,
 	.has_blt_ring = 1,
+	.has_force_wake = 1,
 };
 
 static const struct intel_device_info intel_sandybridge_m_info = {
@@ -222,6 +223,7 @@
 	.has_fbc = 1,
 	.has_bsd_ring = 1,
 	.has_blt_ring = 1,
+	.has_force_wake = 1,
 };
 
 static const struct intel_device_info intel_ivybridge_d_info = {
@@ -229,6 +231,7 @@
 	.need_gfx_hws = 1, .has_hotplug = 1,
 	.has_bsd_ring = 1,
 	.has_blt_ring = 1,
+	.has_force_wake = 1,
 };
 
 static const struct intel_device_info intel_ivybridge_m_info = {
@@ -237,6 +240,7 @@
 	.has_fbc = 0,	/* FBC is not enabled on Ivybridge mobile yet */
 	.has_bsd_ring = 1,
 	.has_blt_ring = 1,
+	.has_force_wake = 1,
 };
 
 static const struct pci_device_id pciidlist[] = {		/* aka */
@@ -939,7 +943,7 @@
 
 /* We give fast paths for the really cool registers */
 #define NEEDS_FORCE_WAKE(dev_priv, reg) \
-	(((dev_priv)->info->gen >= 6) && \
+	((HAS_FORCE_WAKE((dev_priv)->dev)) && \
 	 ((reg) < 0x40000) &&		 \
 	 ((reg) != FORCEWAKE) &&	 \
 	 ((reg) != ECOBUS))
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -244,6 +244,7 @@
 	u8 is_broadwater:1;
 	u8 is_crestline:1;
 	u8 is_ivybridge:1;
+	u8 has_force_wake:1;
 	u8 has_fbc:1;
 	u8 has_pipe_cxsr:1;
 	u8 has_hotplug:1;
@@ -1001,6 +1002,8 @@
 #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
 #define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
 
+#define HAS_FORCE_WAKE(dev) (INTEL_INFO(dev)->has_force_wake)
+
 #include "i915_trace.h"
 
 extern struct drm_ioctl_desc i915_ioctls[];
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -263,10 +263,15 @@
 
 static int init_ring_common(struct intel_ring_buffer *ring)
 {
-	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj = ring->obj;
+	int ret = 0;
 	u32 head;
 
+	if (HAS_FORCE_WAKE(dev))
+		gen6_gt_force_wake_get(dev_priv);
+
 	/* Stop the ring if it's running. */
 	I915_WRITE_CTL(ring, 0);
 	I915_WRITE_HEAD(ring, 0);
@@ -314,7 +319,8 @@
 				I915_READ_HEAD(ring),
 				I915_READ_TAIL(ring),
 				I915_READ_START(ring));
-		return -EIO;
+		ret = -EIO;
+		goto out;
 	}
 
 	if (!drm_core_check_feature(ring->dev, DRIVER_MODESET))
@@ -325,7 +331,11 @@
 		ring->space = ring_space(ring);
 	}
 
-	return 0;
+out:
+	if (HAS_FORCE_WAKE(dev))
+		gen6_gt_force_wake_put(dev_priv);
+
+	return ret;
 }
 
 static int

[ 03/69] drm/i915: Unpin the flip target if we fail to queue the flip

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 83d4092b0381e5dd6f312b2ec57121dcf0fcbade upstream.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2:
 - adjust context
 - we don't have intel_unpin_fb_obj(); use i915_gem_object_unpin()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/i915/intel_display.c |   50 ++++++++++++++++++++++++----------
 1 file changed, 35 insertions(+), 15 deletions(-)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7009,14 +7009,14 @@
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	/* Offset into the new buffer for cases of shared fbs between CRTCs */
 	offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
 
 	ret = BEGIN_LP_RING(6);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	/* Can't queue multiple flips, so wait for the previous
 	 * one to finish before executing the next.
@@ -7033,7 +7033,11 @@
 	OUT_RING(obj->gtt_offset + offset);
 	OUT_RING(MI_NOOP);
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
@@ -7050,14 +7054,14 @@
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	/* Offset into the new buffer for cases of shared fbs between CRTCs */
 	offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
 
 	ret = BEGIN_LP_RING(6);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	if (intel_crtc->plane)
 		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
@@ -7072,7 +7076,11 @@
 	OUT_RING(MI_NOOP);
 
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
@@ -7088,11 +7096,11 @@
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	ret = BEGIN_LP_RING(4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	/* i965+ uses the linear or tiled offsets from the
 	 * Display Registers (which do not change across a page-flip)
@@ -7111,7 +7119,11 @@
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	OUT_RING(pf | pipesrc);
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
@@ -7127,11 +7139,11 @@
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	ret = BEGIN_LP_RING(4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	OUT_RING(MI_DISPLAY_FLIP |
 		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
@@ -7142,7 +7154,11 @@
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	OUT_RING(pf | pipesrc);
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
@@ -7164,18 +7180,22 @@
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
-		goto out;
+		goto err;
 
 	ret = intel_ring_begin(ring, 4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
 	intel_ring_emit(ring, (fb->pitch | obj->tiling_mode));
 	intel_ring_emit(ring, (obj->gtt_offset));
 	intel_ring_emit(ring, (MI_NOOP));
 	intel_ring_advance(ring);
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 

[ 04/69] drm/i915: fix up ivb plane 3 pageflips

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit cb05d8dedefa3066bf5d74ef88c6ca6cf4bd1c87 upstream.

Or at least plug another gapping hole. Apparrently hw desingers only
moved the bit field, but did not bother ot re-enumerate the planes
when adding support for a 3rd pipe.

Discovered by i-g-t/flip_test.

This may or may not fix the reference bugzilla, because that one
smells like we have still larger fish to fry.

v2: Fixup the impossible case to catch programming errors, noticed by
Chris Wilson.

References: https://bugs.freedesktop.org/show_bug.cgi?id=50069
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/i915/i915_reg.h      |    8 ++++++++
 drivers/gpu/drm/i915/intel_display.c |   19 ++++++++++++++++++-
 2 files changed, 26 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -164,6 +164,14 @@
 #define MI_DISPLAY_FLIP		MI_INSTR(0x14, 2)
 #define MI_DISPLAY_FLIP_I915	MI_INSTR(0x14, 1)
 #define   MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
+/* IVB has funny definitions for which plane to flip. */
+#define   MI_DISPLAY_FLIP_IVB_PLANE_A  (0 << 19)
+#define   MI_DISPLAY_FLIP_IVB_PLANE_B  (1 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
+#define   MI_DISPLAY_FLIP_IVB_PLANE_C  (4 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
+
 #define MI_SET_CONTEXT		MI_INSTR(0x18, 0)
 #define   MI_MM_SPACE_GTT		(1<<8)
 #define   MI_MM_SPACE_PHYSICAL		(0<<8)
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7176,17 +7176,34 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
+	uint32_t plane_bit = 0;
 	int ret;
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
 		goto err;
 
+	switch(intel_crtc->plane) {
+	case PLANE_A:
+		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
+		break;
+	case PLANE_B:
+		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
+		break;
+	case PLANE_C:
+		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
+		break;
+	default:
+		WARN_ONCE(1, "unknown plane in flip command\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
 	ret = intel_ring_begin(ring, 4);
 	if (ret)
 		goto err_unpin;
 
-	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
+	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
 	intel_ring_emit(ring, (fb->pitch | obj->tiling_mode));
 	intel_ring_emit(ring, (obj->gtt_offset));
 	intel_ring_emit(ring, (MI_NOOP));

[ 05/69] char/agp: add another Ironlake host bridge

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eugeni Dodonov <eugeni.dodonov@intel.com>

commit 67384fe3fd450536342330f684ea1f7dcaef8130 upstream.

This seems to come on Gigabyte H55M-S2V and was discovered through the
https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/char/agp/intel-agp.c |    1 +
 drivers/char/agp/intel-agp.h |    1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 764f70c..0a41852 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -898,6 +898,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_B43_HB),
 	ID(PCI_DEVICE_ID_INTEL_B43_1_HB),
 	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB),
+	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D2_HB),
 	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB),
 	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB),
 	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB),
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h
index c009175..8e2d914 100644
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@@ -212,6 +212,7 @@
 #define PCI_DEVICE_ID_INTEL_G41_HB          0x2E30
 #define PCI_DEVICE_ID_INTEL_G41_IG          0x2E32
 #define PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB	    0x0040
+#define PCI_DEVICE_ID_INTEL_IRONLAKE_D2_HB	    0x0069
 #define PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG	    0x0042
 #define PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB	    0x0044
 #define PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB	    0x0062

[ 06/69] x86/uv: Fix UV2 BAU legacy mode

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cliff Wickman <cpw@sgi.com>

commit d5d2d2eea84b0d8450b082edbc3dbde41fb8bfd8 upstream.

The SGI Altix UV2 BAU (Broadcast Assist Unit) as used for
tlb-shootdown (selective broadcast mode) always uses UV2
broadcast descriptor format. There is no need to clear the
'legacy' (UV1) mode, because the hardware always uses UV2 mode
for selective broadcast.

But the BIOS uses general broadcast and legacy mode, and the
hardware pays attention to the legacy mode bit for general
broadcast. So the kernel must not clear that mode bit.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/E1SccoO-0002Lh-Cb@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/include/asm/uv/uv_bau.h |    1 -
 arch/x86/platform/uv/tlb_uv.c    |    1 -
 2 files changed, 2 deletions(-)

diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index becf47b..6149b47 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -149,7 +149,6 @@
 /* 4 bits of software ack period */
 #define UV2_ACK_MASK			0x7UL
 #define UV2_ACK_UNITS_SHFT		3
-#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
 #define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
 
 /*
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 3ae0e61..59880af 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1295,7 +1295,6 @@ static void __init enable_timeouts(void)
 		 */
 		mmr_image |= (1L << SOFTACK_MSHIFT);
 		if (is_uv2_hub()) {
-			mmr_image &= ~(1L << UV2_LEG_SHFT);
 			mmr_image |= (1L << UV2_EXT_SHFT);
 		}
 		write_mmr_misc_control(pnode, mmr_image);

[ 07/69] powerpc: Fix kernel panic during kernel module load

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steffen Rumler <steffen.rumler.ext@nsn.com>

commit 3c75296562f43e6fbc6cddd3de948a7b3e4e9bcf upstream.

This fixes a problem which can causes kernel oopses while loading
a kernel module.

According to the PowerPC EABI specification, GPR r11 is assigned
the dedicated function to point to the previous stack frame.
In the powerpc-specific kernel module loader, do_plt_call()
(in arch/powerpc/kernel/module_32.c), GPR r11 is also used
to generate trampoline code.

This combination crashes the kernel, in the case where the compiler
chooses to use a helper function for saving GPRs on entry, and the
module loader has placed the .init.text section far away from the
.text section, meaning that it has to generate a trampoline for
functions in the .init.text section to call the GPR save helper.
Because the trampoline trashes r11, references to the stack frame
using r11 can cause an oops.

The fix just uses GPR r12 instead of GPR r11 for generating the
trampoline code.  According to the statements from Freescale, this is
safe from an EABI perspective.

I've tested the fix for kernel 2.6.33 on MPC8541.

Signed-off-by: Steffen Rumler <steffen.rumler.ext@nsn.com>
[paulus@samba.org: reworded the description]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/powerpc/kernel/module_32.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index 0b6d796..2e3200c 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -176,8 +176,8 @@ int module_frob_arch_sections(Elf32_Ehdr *hdr,
 
 static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
 {
-	if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16)
-	    && entry->jump[1] == 0x396b0000 + (val & 0xffff))
+	if (entry->jump[0] == 0x3d800000 + ((val + 0x8000) >> 16)
+	    && entry->jump[1] == 0x398c0000 + (val & 0xffff))
 		return 1;
 	return 0;
 }
@@ -204,10 +204,9 @@ static uint32_t do_plt_call(void *location,
 		entry++;
 	}
 
-	/* Stolen from Paul Mackerras as well... */
-	entry->jump[0] = 0x3d600000+((val+0x8000)>>16);	/* lis r11,sym@ha */
-	entry->jump[1] = 0x396b0000 + (val&0xffff);	/* addi r11,r11,sym@l*/
-	entry->jump[2] = 0x7d6903a6;			/* mtctr r11 */
+	entry->jump[0] = 0x3d800000+((val+0x8000)>>16); /* lis r12,sym@ha */
+	entry->jump[1] = 0x398c0000 + (val&0xffff);     /* addi r12,r12,sym@l*/
+	entry->jump[2] = 0x7d8903a6;                    /* mtctr r12 */
 	entry->jump[3] = 0x4e800420;			/* bctr */
 
 	DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);

[ 08/69] drm/nouveau: determine a value for display_info.bpc if edid doesnt

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Skeggs <bskeggs@redhat.com>

commit 6322175530c89ab719cea28202f96a3660491727 upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c |   46 +++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 5e830a5..fc42ea8 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -644,6 +644,46 @@ nouveau_connector_scaler_modes_add(struct drm_connector *connector)
 	return modes;
 }
 
+static void
+nouveau_connector_detect_depth(struct drm_connector *connector)
+{
+	struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
+	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
+	struct nvbios *bios = &dev_priv->vbios;
+	struct drm_display_mode *mode = nv_connector->native_mode;
+	bool duallink;
+
+	/* if the edid is feeling nice enough to provide this info, use it */
+	if (nv_connector->edid && connector->display_info.bpc)
+		return;
+
+	/* if not, we're out of options unless we're LVDS, default to 6bpc */
+	connector->display_info.bpc = 6;
+	if (nv_encoder->dcb->type != OUTPUT_LVDS)
+		return;
+
+	/* LVDS: panel straps */
+	if (bios->fp_no_ddc) {
+		if (bios->fp.if_is_24bit)
+			connector->display_info.bpc = 8;
+		return;
+	}
+
+	/* LVDS: DDC panel, need to first determine the number of links to
+	 * know which if_is_24bit flag to check...
+	 */
+	if (nv_connector->edid &&
+	    nv_connector->dcb->type == DCB_CONNECTOR_LVDS_SPWG)
+		duallink = ((u8 *)nv_connector->edid)[121] == 2;
+	else
+		duallink = mode->clock >= bios->fp.duallink_transition_clk;
+
+	if ((!duallink && (bios->fp.strapless_is_24bit & 1)) ||
+	    ( duallink && (bios->fp.strapless_is_24bit & 2)))
+		connector->display_info.bpc = 8;
+}
+
 static int
 nouveau_connector_get_modes(struct drm_connector *connector)
 {
@@ -688,6 +728,12 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 		ret = 1;
 	}
 
+	/* Attempt to determine display colour depth, this has to happen after
+	 * we've determined the "native" mode for LVDS, as the VBIOS tables
+	 * require us to compare against a pixel clock in some cases..
+	 */
+	nouveau_connector_detect_depth(connector);
+
 	if (nv_encoder->dcb->type == OUTPUT_TV)
 		ret = get_slave_funcs(encoder)->get_modes(encoder, connector);
 

[ 09/69] drm/nouveau: default to 8bpc for non-LVDS panels if EDID isnt useful

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Skeggs <bskeggs@redhat.com>

commit c8435362f2211086b34ce871fa9c3fcc7ca79ff9 upstream.

A few reports of bad behaviour since the autodetection defaulted to 6bpc,
lets fix this.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 8f510fd..fa86035 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -654,10 +654,13 @@ nouveau_connector_detect_depth(struct drm_connector *connector)
 	if (nv_connector->edid && connector->display_info.bpc)
 		return;
 
-	/* if not, we're out of options unless we're LVDS, default to 6bpc */
-	connector->display_info.bpc = 6;
-	if (nv_encoder->dcb->type != OUTPUT_LVDS)
+	/* if not, we're out of options unless we're LVDS, default to 8bpc */
+	if (nv_encoder->dcb->type != OUTPUT_LVDS) {
+		connector->display_info.bpc = 8;
 		return;
+	}
+
+	connector->display_info.bpc = 6;
 
 	/* LVDS: panel straps */
 	if (bios->fp_no_ddc) {

[ 10/69] drm/nouveau/disp: fix dithering not being enabled on some eDP macbooks

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Skeggs <bskeggs@redhat.com>

commit a6a17859f1bdf607650ee055101f54c5f207762b upstream.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
[Maarten Lankhorst backported to 3.2,
 changing nv_connector->type to nv_connector->dcb->type]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -616,7 +616,13 @@
 	if (nv_connector->edid && connector->display_info.bpc)
 		return;
 
-	/* if not, we're out of options unless we're LVDS, default to 8bpc */
+	/* EDID 1.4 is *supposed* to be supported on eDP, but, Apple... */
+	if (nv_connector->dcb->type == DCB_CONNECTOR_eDP) {
+		connector->display_info.bpc = 6;
+		return;
+	}
+
+	/* we're out of options unless we're LVDS, default to 8bpc */
 	if (nv_encoder->dcb->type != OUTPUT_LVDS) {
 		connector->display_info.bpc = 8;
 		return;

[ 11/69] fuse: fix stat call on 32 bit platforms

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <piastry@etersoft.ru>

commit 45c72cd73c788dd18c8113d4a404d6b4a01decf1 upstream.

Now we store attr->ino at inode->i_ino, return attr->ino at the
first time and then return inode->i_ino if the attribute timeout
isn't expired. That's wrong on 32 bit platforms because attr->ino
is 64 bit and inode->i_ino is 32 bit in this case.

Fix this by saving 64 bit ino in fuse_inode structure and returning
it every time we call getattr. Also squash attr->ino into inode->i_ino
explicitly.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/fuse/dir.c    |    1 +
 fs/fuse/fuse_i.h |    3 +++
 fs/fuse/inode.c  |   17 ++++++++++++++++-
 3 files changed, 20 insertions(+), 1 deletion(-)

--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -858,6 +858,7 @@
 		if (stat) {
 			generic_fillattr(inode, stat);
 			stat->mode = fi->orig_i_mode;
+			stat->ino = fi->orig_ino;
 		}
 	}
 
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -82,6 +82,9 @@
 	    preserve the original mode */
 	mode_t orig_i_mode;
 
+	/** 64 bit inode number */
+	u64 orig_ino;
+
 	/** Version of last attribute change */
 	u64 attr_version;
 
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -91,6 +91,7 @@
 	fi->nlookup = 0;
 	fi->attr_version = 0;
 	fi->writectr = 0;
+	fi->orig_ino = 0;
 	INIT_LIST_HEAD(&fi->write_files);
 	INIT_LIST_HEAD(&fi->queued_writes);
 	INIT_LIST_HEAD(&fi->writepages);
@@ -140,6 +141,18 @@
 	return 0;
 }
 
+/*
+ * ino_t is 32-bits on 32-bit arch. We have to squash the 64-bit value down
+ * so that it will fit.
+ */
+static ino_t fuse_squash_ino(u64 ino64)
+{
+	ino_t ino = (ino_t) ino64;
+	if (sizeof(ino_t) < sizeof(u64))
+		ino ^= ino64 >> (sizeof(u64) - sizeof(ino_t)) * 8;
+	return ino;
+}
+
 void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
 				   u64 attr_valid)
 {
@@ -149,7 +162,7 @@
 	fi->attr_version = ++fc->attr_version;
 	fi->i_time = attr_valid;
 
-	inode->i_ino     = attr->ino;
+	inode->i_ino     = fuse_squash_ino(attr->ino);
 	inode->i_mode    = (inode->i_mode & S_IFMT) | (attr->mode & 07777);
 	set_nlink(inode, attr->nlink);
 	inode->i_uid     = attr->uid;
@@ -175,6 +188,8 @@
 	fi->orig_i_mode = inode->i_mode;
 	if (!(fc->flags & FUSE_DEFAULT_PERMISSIONS))
 		inode->i_mode &= ~S_ISVTX;
+
+	fi->orig_ino = attr->ino;
 }
 
 void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,

[ 12/69] x86, MCE, AMD: Make APIC LVT thresholding interrupt optional

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Borislav Petkov <borislav.petkov@amd.com>

commit f227d4306cf30e1d5b6f231e8ef9006c34f3d186 upstream.

Currently, the APIC LVT interrupt for error thresholding is implicitly
enabled. However, there are models in the F15h range which do not enable
it. Make the code machinery which sets up the APIC interrupt support
an optional setting and add an ->interrupt_capable member to the bank
representation mirroring that capability and enable the interrupt offset
programming only if it is true.

Simplify code and fixup comment style while at it.

This patch is for stable kernels v3.0 to v3.2.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/kernel/cpu/mcheck/mce_amd.c |   55 +++++++++++++++++++++++++++-------
 1 files changed, 44 insertions(+), 11 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index bb0adad..dc4fb77 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -52,6 +52,7 @@ struct threshold_block {
 	unsigned int		cpu;
 	u32			address;
 	u16			interrupt_enable;
+	bool			interrupt_capable;
 	u16			threshold_limit;
 	struct kobject		kobj;
 	struct list_head	miscj;
@@ -86,6 +87,21 @@ struct thresh_restart {
 	u16			old_limit;
 };
 
+static bool lvt_interrupt_supported(unsigned int bank, u32 msr_high_bits)
+{
+	/*
+	 * bank 4 supports APIC LVT interrupts implicitly since forever.
+	 */
+	if (bank == 4)
+		return true;
+
+	/*
+	 * IntP: interrupt present; if this bit is set, the thresholding
+	 * bank can generate APIC LVT interrupts
+	 */
+	return msr_high_bits & BIT(28);
+}
+
 static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 {
 	int msr = (hi & MASK_LVTOFF_HI) >> 20;
@@ -107,8 +123,10 @@ static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 	return 1;
 };
 
-/* must be called with correct cpu affinity */
-/* Called via smp_call_function_single() */
+/*
+ * Called via smp_call_function_single(), must be called with correct
+ * cpu affinity.
+ */
 static void threshold_restart_bank(void *_tr)
 {
 	struct thresh_restart *tr = _tr;
@@ -131,6 +149,12 @@ static void threshold_restart_bank(void *_tr)
 		    (new_count & THRESHOLD_MAX);
 	}
 
+	/* clear IntType */
+	hi &= ~MASK_INT_TYPE_HI;
+
+	if (!tr->b->interrupt_capable)
+		goto done;
+
 	if (tr->set_lvt_off) {
 		if (lvt_off_valid(tr->b, tr->lvt_off, lo, hi)) {
 			/* set new lvt offset */
@@ -139,9 +163,10 @@ static void threshold_restart_bank(void *_tr)
 		}
 	}
 
-	tr->b->interrupt_enable ?
-	    (hi = (hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) :
-	    (hi &= ~MASK_INT_TYPE_HI);
+	if (tr->b->interrupt_enable)
+		hi |= INT_TYPE_APIC;
+
+ done:
 
 	hi |= MASK_COUNT_EN_HI;
 	wrmsr(tr->b->address, lo, hi);
@@ -206,14 +231,18 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 			if (shared_bank[bank] && c->cpu_core_id)
 				break;
 #endif
-			offset = setup_APIC_mce(offset,
-						(high & MASK_LVTOFF_HI) >> 20);
 
 			memset(&b, 0, sizeof(b));
-			b.cpu		= cpu;
-			b.bank		= bank;
-			b.block		= block;
-			b.address	= address;
+			b.cpu			= cpu;
+			b.bank			= bank;
+			b.block			= block;
+			b.address		= address;
+			b.interrupt_capable	= lvt_interrupt_supported(bank, high);
+
+			if (b.interrupt_capable) {
+				int new = (high & MASK_LVTOFF_HI) >> 20;
+				offset  = setup_APIC_mce(offset, new);
+			}
 
 			mce_threshold_block_init(&b, offset);
 			mce_threshold_vector = amd_threshold_interrupt;
@@ -313,6 +342,9 @@ store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
 	struct thresh_restart tr;
 	unsigned long new;
 
+	if (!b->interrupt_capable)
+		return -EINVAL;
+
 	if (strict_strtoul(buf, 0, &new) < 0)
 		return -EINVAL;
 
@@ -471,6 +503,7 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
 	b->cpu			= cpu;
 	b->address		= address;
 	b->interrupt_enable	= 0;
+	b->interrupt_capable	= lvt_interrupt_supported(bank, high);
 	b->threshold_limit	= THRESHOLD_MAX;
 
 	INIT_LIST_HEAD(&b->miscj);

[ 13/69] x86/amd: Re-enable CPU topology extensions in case BIOS has disabled it

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Herrmann <andreas.herrmann3@amd.com>

BIOS will switch off the corresponding feature flag on family
15h models 10h-1fh non-desktop CPUs.

The topology extension CPUID leafs are required to detect which
cores belong to the same compute unit. (thread siblings mask is
set accordingly and also correct information about L1i and L2
cache sharing depends on this).

W/o this patch we wouldn't see which cores belong to the same
compute unit and also cache sharing information for L1i and L2
would be incorrect on such systems.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit f7f286a910221ae18b21c18d9d0f4cd88965829f)

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/kernel/cpu/amd.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 0bab2b1..3524e1f 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -571,6 +571,24 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		}
 	}
 
+	/* re-enable TopologyExtensions if switched off by BIOS */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x10) && (c->x86_model <= 0x1f) &&
+	    !cpu_has(c, X86_FEATURE_TOPOEXT)) {
+		u64 val;
+
+		if (!rdmsrl_amd_safe(0xc0011005, &val)) {
+			val |= 1ULL << 54;
+			wrmsrl_amd_safe(0xc0011005, val);
+			rdmsrl(0xc0011005, val);
+			if (val & (1ULL << 54)) {
+				set_cpu_cap(c, X86_FEATURE_TOPOEXT);
+				printk(KERN_INFO FW_INFO "CPU: Re-enabling "
+				  "disabled Topology Extensions Support\n");
+			}
+		}
+	}
+
 	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */

[ 14/69] hwmon: (fam15h_power) Increase output resolution

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andre Przywara <andre.przywara@amd.com>

On high CPU load the accumulating values in the running_avg_cap
register are very low (below 10), so averaging them too early leads
to unnecessary poor output resolution. Since we pretend to output
micro-Watt we better keep all the bits we have as long as possible.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
(cherry picked from commit 941a956b0e387b21f385f486c34ef67576775cfc)

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/hwmon/fam15h_power.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 9a4c3ab..e8e18ca 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -61,14 +61,14 @@ static ssize_t show_power(struct device *dev,
 				  REG_TDP_RUNNING_AVERAGE, &val);
 	running_avg_capture = (val >> 4) & 0x3fffff;
 	running_avg_capture = sign_extend32(running_avg_capture, 21);
-	running_avg_range = val & 0xf;
+	running_avg_range = (val & 0xf) + 1;
 
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
 				  REG_TDP_LIMIT3, &val);
 
 	tdp_limit = val >> 16;
-	curr_pwr_watts = tdp_limit + data->base_tdp -
-		(s32)(running_avg_capture >> (running_avg_range + 1));
+	curr_pwr_watts = (tdp_limit + data->base_tdp) << running_avg_range;
+	curr_pwr_watts -= running_avg_capture;
 	curr_pwr_watts *= data->tdp_to_watts;
 
 	/*
@@ -78,7 +78,7 @@ static ssize_t show_power(struct device *dev,
 	 * scaling factor 1/(2^16).  For conversion we use
 	 * (10^6)/(2^16) = 15625/(2^10)
 	 */
-	curr_pwr_watts = (curr_pwr_watts * 15625) >> 10;
+	curr_pwr_watts = (curr_pwr_watts * 15625) >> (10 + running_avg_range);
 	return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts);
 }
 static DEVICE_ATTR(power1_input, S_IRUGO, show_power, NULL);

[ 15/69] sched: Fix the relax_domain_level boot parameter

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dimitri Sivanich <sivanich@sgi.com>

commit a841f8cef4bb124f0f5563314d0beaf2e1249d72 upstream.

It does not get processed because sched_domain_level_max is 0 at the
time that setup_relax_domain_level() is run.

Simply accept the value as it is, as we don't know the value of
sched_domain_level_max until sched domain construction is completed.

Fix sched_relax_domain_level in cpuset.  The build_sched_domain() routine calls
the set_domain_attribute() routine prior to setting the sd->level, however,
the set_domain_attribute() routine relies on the sd->level to decide whether
idle load balancing will be off/on.

Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120605184436.GA15668@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust the filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 kernel/sched/core.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7429,11 +7429,8 @@
 
 static int __init setup_relax_domain_level(char *str)
 {
-	unsigned long val;
-
-	val = simple_strtoul(str, NULL, 0);
-	if (val < sched_domain_level_max)
-		default_relax_domain_level = val;
+	if (kstrtoint(str, 0, &default_relax_domain_level))
+		pr_warn("Unable to set relax_domain_level\n");
 
 	return 1;
 }
@@ -7636,7 +7633,6 @@
 	if (!sd)
 		return child;
 
-	set_domain_attribute(sd, attr);
 	cpumask_and(sched_domain_span(sd), cpu_map, tl->mask(cpu));
 	if (child) {
 		sd->level = child->level + 1;
@@ -7644,6 +7640,7 @@
 		child->parent = sd;
 	}
 	sd->child = child;
+	set_domain_attribute(sd, attr);
 
 	return sd;
 }

[ 16/69] iwlwifi: dont mess up the SCD when removing a key

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit d6ee27eb13beab94056e0de52d81220058ca2297 upstream.

When we remove a key, we put a key index which was supposed
to tell the fw that we are actually removing the key. But
instead the fw took that index as a valid index and messed
up the SRAM of the device.

This memory corruption on the device mangled the data of
the SCD. The impact on the user is that SCD queue 2 got
stuck after having removed keys.
The message is the log that was printed is:

Queue 2 stuck for 10000ms

This doesn't seem to fix the higher queues that get stuck
from time to time.

Reviewed-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/iwlwifi/iwl-agn-sta.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
index aea07aa..eb6a8ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
@@ -1267,7 +1267,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
 		key_flags |= STA_KEY_MULTICAST_MSK;
 
 	sta_cmd.key.key_flags = key_flags;
-	sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
+	sta_cmd.key.key_offset = keyconf->hw_key_idx;
 	sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
 

[ 17/69] hwrng: atmel-rng - fix race condition leading to repeated bits

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Korsgaard <jacmet@sunsite.dk>

commit 121daad8fd1dce63076fa55aaedd5dc3f981b334 upstream.

Data valid gets cleared by reading the ISR (status register) and NOT from
reading ODATA (data register). A new data word can become available between
checking ISR and reading ODATA, causing us to reuse the same data word next
time atmel_trng_read() gets called, if that happens before the following
data word is ready.

With this fixed, rngtest no longer complains of 'Continous run' errors.
Before:

rngtest -c 1000 < /dev/hwrng
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 923
rngtest: FIPS 140-2 failures: 77
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 76
rngtest: input channel speed: (min=721.402; avg=46003.510; max=49321.338)Kibitss
rngtest: FIPS tests speed: (min=11.442; avg=12.714; max=12.801)Mibits/s
rngtest: Program run time: 1931860 microseconds

After:

rngtest -c 1000 < /dev/hwrng
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 1000
rngtest: FIPS 140-2 failures: 0
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 0
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=777.518; avg=36988.482; max=43115.342)Kibitss
rngtest: FIPS tests speed: (min=11.951; avg=12.715; max=12.887)Mibits/s
rngtest: Program run time: 2035543 microseconds

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported-by: George Pontis <GPontis@z9.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/char/hw_random/atmel-rng.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index f518b99..6289f0e 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -36,6 +36,13 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
 	/* data ready? */
 	if (readl(trng->base + TRNG_ODATA) & 1) {
 		*data = readl(trng->base + TRNG_ODATA);
+		/*
+		  ensure data ready is only set again AFTER the next data
+		  word is ready in case it got set between checking ISR
+		  and reading ODATA, so we don't risk re-reading the
+		  same word
+		*/
+		readl(trng->base + TRNG_ISR);
 		return 4;
 	} else
 		return 0;

[ 17/69] hwrng: atmel-rng - fix race condition leading to repeated bits

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Korsgaard <jacmet@sunsite.dk>

commit 121daad8fd1dce63076fa55aaedd5dc3f981b334 upstream.

Data valid gets cleared by reading the ISR (status register) and NOT from
reading ODATA (data register). A new data word can become available between
checking ISR and reading ODATA, causing us to reuse the same data word next
time atmel_trng_read() gets called, if that happens before the following
data word is ready.

With this fixed, rngtest no longer complains of 'Continous run' errors.
Before:

rngtest -c 1000 < /dev/hwrng
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 923
rngtest: FIPS 140-2 failures: 77
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 76
rngtest: input channel speed: (min=721.402; avg=46003.510; max=49321.338)Kibitss
rngtest: FIPS tests speed: (min=11.442; avg=12.714; max=12.801)Mibits/s
rngtest: Program run time: 1931860 microseconds

After:

rngtest -c 1000 < /dev/hwrng
rngtest 3
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions.  There is NO warr.

rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 1000
rngtest: FIPS 140-2 failures: 0
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 0
rngtest: FIPS 140-2(2001-10-10) Runs: 0
rngtest: FIPS 140-2(2001-10-10) Long run: 0
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=777.518; avg=36988.482; max=43115.342)Kibitss
rngtest: FIPS tests speed: (min=11.951; avg=12.715; max=12.887)Mibits/s
rngtest: Program run time: 2035543 microseconds

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported-by: George Pontis <GPontis@z9.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/char/hw_random/atmel-rng.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index f518b99..6289f0e 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -36,6 +36,13 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
 	/* data ready? */
 	if (readl(trng->base + TRNG_ODATA) & 1) {
 		*data = readl(trng->base + TRNG_ODATA);
+		/*
+		  ensure data ready is only set again AFTER the next data
+		  word is ready in case it got set between checking ISR
+		  and reading ODATA, so we don't risk re-reading the
+		  same word
+		*/
+		readl(trng->base + TRNG_ISR);
 		return 4;
 	} else
 		return 0;

[ 18/69] crypto: aesni-intel - fix unaligned cbc decrypt for x86-32

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit 7c8d51848a88aafdb68f42b6b650c83485ea2f84 upstream.

The 32 bit variant of cbc(aes) decrypt is using instructions requiring
128 bit aligned memory locations but fails to ensure this constraint in
the code. Fix this by loading the data into intermediate registers with
load unaligned instructions.

This fixes reported general protection faults related to aesni.

References: https://bugzilla.kernel.org/show_bug.cgi?id=43223
Reported-by: Daniel <garkein@mailueberfall.de>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/crypto/aesni-intel_asm.S |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index be6d9e3..3470624 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -2460,10 +2460,12 @@ ENTRY(aesni_cbc_dec)
 	pxor IN3, STATE4
 	movaps IN4, IV
 #else
-	pxor (INP), STATE2
-	pxor 0x10(INP), STATE3
 	pxor IN1, STATE4
 	movaps IN2, IV
+	movups (INP), IN1
+	pxor IN1, STATE2
+	movups 0x10(INP), IN2
+	pxor IN2, STATE3
 #endif
 	movups STATE1, (OUTP)
 	movups STATE2, 0x10(OUTP)

[ 18/69] crypto: aesni-intel - fix unaligned cbc decrypt for x86-32

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit 7c8d51848a88aafdb68f42b6b650c83485ea2f84 upstream.

The 32 bit variant of cbc(aes) decrypt is using instructions requiring
128 bit aligned memory locations but fails to ensure this constraint in
the code. Fix this by loading the data into intermediate registers with
load unaligned instructions.

This fixes reported general protection faults related to aesni.

References: https://bugzilla.kernel.org/show_bug.cgi?id=43223
Reported-by: Daniel <garkein@mailueberfall.de>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/crypto/aesni-intel_asm.S |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index be6d9e3..3470624 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -2460,10 +2460,12 @@ ENTRY(aesni_cbc_dec)
 	pxor IN3, STATE4
 	movaps IN4, IV
 #else
-	pxor (INP), STATE2
-	pxor 0x10(INP), STATE3
 	pxor IN1, STATE4
 	movaps IN2, IV
+	movups (INP), IN1
+	pxor IN1, STATE2
+	movups 0x10(INP), IN2
+	pxor IN2, STATE3
 #endif
 	movups STATE1, (OUTP)
 	movups STATE2, 0x10(OUTP)

[ 19/69] xen/setup: filter APERFMPERF cpuid feature out

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andre Przywara <andre.przywara@amd.com>

commit 5e626254206a709c6e937f3dda69bf26c7344f6f upstream.

Xen PV kernels allow access to the APERF/MPERF registers to read the
effective frequency. Access to the MSRs is however redirected to the
currently scheduled physical CPU, making consecutive read and
compares unreliable. In addition each rdmsr traps into the hypervisor.
So to avoid bogus readouts and expensive traps, disable the kernel
internal feature flag for APERF/MPERF if running under Xen.
This will
a) remove the aperfmperf flag from /proc/cpuinfo
b) not mislead the power scheduler (arch/x86/kernel/cpu/sched.c) to
   use the feature to improve scheduling (by default disabled)
c) not mislead the cpufreq driver to use the MSRs

This does not cover userland programs which access the MSRs via the
device file interface, but this will be addressed separately.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/x86/xen/enlighten.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -198,6 +198,9 @@
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
 static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
 static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
 
@@ -218,6 +221,11 @@
 		maskedx = cpuid_leaf1_edx_mask;
 		break;
 
+	case CPUID_THERM_POWER_LEAF:
+		/* Disabling APERFMPERF for kernel usage */
+		maskecx = ~(1 << APERFMPERF_PRESENT);
+		break;
+
 	case 0xb:
 		/* Suppress extended topology stuff */
 		maskebx = 0;

[ 20/69] NFSv4.1: Fix a request leak on the back channel

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit b3b02ae5865c2dcd506322e0fc6def59a042e72f upstream.

If the call to svc_process_common() fails, then the request
needs to be freed before we can exit bc_svc_process.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/sunrpc/svc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 017c011..074df5a 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1377,7 +1377,8 @@ bc_svc_process(struct svc_serv *serv, struct rpc_rqst *req,
 						sizeof(req->rq_snd_buf));
 		return bc_send(req);
 	} else {
-		/* Nothing to do to drop request */
+		/* drop request */
+		xprt_free_bc_request(req);
 		return 0;
 	}
 }

[ 21/69] can: c_can: fix "BUG! echo_skb is occupied!" during transmit

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AnilKumar Ch <anilkumar@ti.com>

commit 617caccebe451716df21c069b079d5936ed7b0f3 upstream.

This patch fixes an issue with transmit routine, which causes
"can_put_echo_skb: BUG! echo_skb is occupied!" message when
using "cansequence -p" on D_CAN controller.

In c_can driver, while transmitting packets tx_echo flag holds
the no of can frames put for transmission into the hardware.

As the comment above c_can_do_tx() indicates, if we find any packet
which is not transmitted then we should stop looking for more.
In the current implementation this is not taken care of causing the
said message.

Also, fix the condition used to find if the packet is transmitted
or not. Current code skips the first tx message object and ends up
checking one extra invalid object.

While at it, fix the comment on top of c_can_do_tx() to use the
terminology "packet" instead of "package" since it is more
standard.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/can/c_can/c_can.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 536bda0..9ac28df 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -686,7 +686,7 @@ static int c_can_get_berr_counter(const struct net_device *dev,
  *
  * We iterate from priv->tx_echo to priv->tx_next and check if the
  * packet has been transmitted, echo it back to the CAN framework.
- * If we discover a not yet transmitted package, stop looking for more.
+ * If we discover a not yet transmitted packet, stop looking for more.
  */
 static void c_can_do_tx(struct net_device *dev)
 {
@@ -698,7 +698,7 @@ static void c_can_do_tx(struct net_device *dev)
 	for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
 		msg_obj_no = get_tx_echo_msg_obj(priv);
 		val = c_can_read_reg32(priv, &priv->regs->txrqst1);
-		if (!(val & (1 << msg_obj_no))) {
+		if (!(val & (1 << (msg_obj_no - 1)))) {
 			can_get_echo_skb(dev,
 					msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
 			stats->tx_bytes += priv->read_reg(priv,
@@ -706,6 +706,8 @@ static void c_can_do_tx(struct net_device *dev)
 					& IF_MCONT_DLC_MASK;
 			stats->tx_packets++;
 			c_can_inval_msg_object(dev, 0, msg_obj_no);
+		} else {
+			break;
 		}
 	}
 

[ 22/69] can: c_can: fix an interrupt thrash issue with c_can driver

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AnilKumar Ch <anilkumar@ti.com>

commit 148c87c89e1a8863d3d965179f3ab1a06490569e upstream.

This patch fixes an interrupt thrash issue with c_can driver.

In c_can_isr() function interrupts are disabled and enabled only in
c_can_poll() function. c_can_isr() & c_can_poll() both read the
irqstatus flag. However, irqstatus is always read as 0 in c_can_poll()
because all C_CAN interrupts are disabled in c_can_isr(). This causes
all interrupts to be re-enabled in c_can_poll() which in turn causes
another interrupt since the event is not really handled. This keeps
happening causing a flood of interrupts.

To fix this, read the irqstatus register in isr and use the same cached
value in the poll function.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/can/c_can/c_can.c |    7 +++----
 drivers/net/can/c_can/c_can.h |    1 +
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 9ac28df..fa01621 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -952,7 +952,7 @@ static int c_can_poll(struct napi_struct *napi, int quota)
 	struct net_device *dev = napi->dev;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+	irqstatus = priv->irqstatus;
 	if (!irqstatus)
 		goto end;
 
@@ -1030,12 +1030,11 @@ end:
 
 static irqreturn_t c_can_isr(int irq, void *dev_id)
 {
-	u16 irqstatus;
 	struct net_device *dev = (struct net_device *)dev_id;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
-	if (!irqstatus)
+	priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+	if (!priv->irqstatus)
 		return IRQ_NONE;
 
 	/* disable all interrupts and schedule the NAPI */
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 9b7fbef..5f32d34 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -76,6 +76,7 @@ struct c_can_priv {
 	unsigned int tx_next;
 	unsigned int tx_echo;
 	void *priv;		/* for board-specific data */
+	u16 irqstatus;
 };
 
 struct net_device *alloc_c_can_dev(void);

[ 23/69] can: c_can: fix race condition in c_can_open()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AnilKumar Ch <anilkumar@ti.com>

commit f461f27a4436dbe691908fe08b867ef888848cc3 upstream.

Fix the issue of C_CAN interrupts getting disabled forever when canconfig
utility is used multiple times. According to NAPI usage we disable all
the hardware interrupts in ISR and re-enable them in poll(). Current
implementation calls napi_enable() after hardware interrupts are enabled.
If we get any interrupts between these two steps then we do not process
those interrupts because napi is not enabled. Mostly these interrupts
come because of STATUS is not 0x7 or ERROR interrupts. If napi_enable()
happens before HW interrupts enabled then c_can_poll() function will be
called eventual re-enabling.

This patch moves the napi_enable() call before interrupts enabled.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/can/c_can/c_can.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index fa01621..8dc84d6 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -1064,10 +1064,11 @@ static int c_can_open(struct net_device *dev)
 		goto exit_irq_fail;
 	}
 
+	napi_enable(&priv->napi);
+
 	/* start the c_can controller */
 	c_can_start(dev);
 
-	napi_enable(&priv->napi);
 	netif_start_queue(dev);
 
 	return 0;

[ 24/69] ARM i.MX53: Fix PLL4 base address

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sascha Hauer <s.hauer@pengutronix.de>

commit cdd781ab1906d039c2a93078385645d2d5af8491 upstream.

MX53_DPLL4_BASE accidently returned the base address of PLL3.
Fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/mach-imx/crm-regs-imx5.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/mach-mx5/crm_regs.h
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -23,7 +23,7 @@
 #define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
 #define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
 #define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
 
 /* PLL Register Offsets */
 #define MXC_PLL_DP_CTL			0x00

[ 25/69] usb: musb_gadget: fix crash caused by dangling pointer

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Grazvydas Ignotas <notasas@gmail.com>

commit 08f75bf14fadaa81fe362d5acda9b77b113dd0a2 upstream.

usb_ep_ops.disable must clear external copy of the endpoint descriptor,
otherwise musb crashes after loading/unloading several gadget modules
in a row:

Unable to handle kernel paging request at virtual address bf013730
pgd = c0004000
[bf013730] *pgd=8f26d811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1]
Modules linked in: g_cdc [last unloaded: g_file_storage]
CPU: 0    Not tainted  (3.2.17 #647)
PC is at musb_gadget_enable+0x4c/0x24c
LR is at _raw_spin_lock_irqsave+0x4c/0x58
[<c027c030>] (musb_gadget_enable+0x4c/0x24c) from [<bf01b760>] (gether_connect+0x3c/0x19c [g_cdc])
[<bf01b760>] (gether_connect+0x3c/0x19c [g_cdc]) from [<bf01ba1c>] (ecm_set_alt+0x15c/0x180 [g_cdc])
[<bf01ba1c>] (ecm_set_alt+0x15c/0x180 [g_cdc]) from [<bf01ecd4>] (composite_setup+0x85c/0xac4 [g_cdc])
[<bf01ecd4>] (composite_setup+0x85c/0xac4 [g_cdc]) from [<c027b744>] (musb_g_ep0_irq+0x844/0x924)
[<c027b744>] (musb_g_ep0_irq+0x844/0x924) from [<c027a97c>] (musb_interrupt+0x79c/0x864)
[<c027a97c>] (musb_interrupt+0x79c/0x864) from [<c027aaa8>] (generic_interrupt+0x64/0x7c)
[<c027aaa8>] (generic_interrupt+0x64/0x7c) from [<c00797cc>] (handle_irq_event_percpu+0x28/0x178)
...

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/musb/musb_gadget.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f42c29b..95918da 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1232,6 +1232,7 @@ static int musb_gadget_disable(struct usb_ep *ep)
 	}
 
 	musb_ep->desc = NULL;
+	musb_ep->end_point.desc = NULL;
 
 	/* abort all pending DMA and requests */
 	nuke(musb_ep, -ESHUTDOWN);

[ 26/69] mac80211: clean up remain-on-channel on interface stop

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 71ecfa1893034eeb1c93e02e22ee2ad26d080858 upstream.

When any interface goes down, it could be the one that we
were doing a remain-on-channel with. We therefore need to
cancel the remain-on-channel and flush the related work
structs so they don't run after the interface has been
removed or even destroyed.

It's also possible in this case that an off-channel SKB
was never transmitted, so free it if this is the case.
Note that this can also happen if the driver finishes
the off-channel period without ever starting it.

Reported-by: Nirav Shah <nirav.j2.shah@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/mac80211/iface.c      |   12 ++++++++++++
 net/mac80211/offchannel.c |   16 ++++++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index d4c19a7..8664111 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -637,6 +637,18 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		ieee80211_configure_filter(local);
 		break;
 	default:
+		mutex_lock(&local->mtx);
+		if (local->hw_roc_dev == sdata->dev &&
+		    local->hw_roc_channel) {
+			/* ignore return value since this is racy */
+			drv_cancel_remain_on_channel(local);
+			ieee80211_queue_work(&local->hw, &local->hw_roc_done);
+		}
+		mutex_unlock(&local->mtx);
+
+		flush_work(&local->hw_roc_start);
+		flush_work(&local->hw_roc_done);
+
 		flush_work(&sdata->work);
 		/*
 		 * When we get here, the interface is marked down.
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index f054e94..935aa4b 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -234,6 +234,22 @@ static void ieee80211_hw_roc_done(struct work_struct *work)
 		return;
 	}
 
+	/* was never transmitted */
+	if (local->hw_roc_skb) {
+		u64 cookie;
+
+		cookie = local->hw_roc_cookie ^ 2;
+
+		cfg80211_mgmt_tx_status(local->hw_roc_dev, cookie,
+					local->hw_roc_skb->data,
+					local->hw_roc_skb->len, false,
+					GFP_KERNEL);
+
+		kfree_skb(local->hw_roc_skb);
+		local->hw_roc_skb = NULL;
+		local->hw_roc_skb_for_status = NULL;
+	}
+
 	if (!local->hw_roc_for_tx)
 		cfg80211_remain_on_channel_expired(local->hw_roc_dev,
 						   local->hw_roc_cookie,

[ 27/69] rt2x00: use atomic variable for seqno

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit e5851dac2c95af7159716832300b9f50c62c648e upstream.

Remove spinlock as atomic_t can be used instead. Note we use only 16
lower bits, upper bits are changed but we impilcilty cast to u16.

This fix possible deadlock on IBSS mode reproted by lockdep:

=================================
[ INFO: inconsistent lock state ]
3.4.0-wl+ #4 Not tainted
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/u:2/30374 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&intf->seqlock)->rlock){+.?...}, at: [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
{IN-SOFTIRQ-W} state was registered at:
  [<c04978ab>] __lock_acquire+0x47b/0x1050
  [<c0498504>] lock_acquire+0x84/0xf0
  [<c0835733>] _raw_spin_lock+0x33/0x40
  [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
  [<f9979f2a>] rt2x00queue_write_tx_frame+0x1a/0x300 [rt2x00lib]
  [<f997834f>] rt2x00mac_tx+0x7f/0x380 [rt2x00lib]
  [<f98fe363>] __ieee80211_tx+0x1b3/0x300 [mac80211]
  [<f98ffdf5>] ieee80211_tx+0x105/0x130 [mac80211]
  [<f99000dd>] ieee80211_xmit+0xad/0x100 [mac80211]
  [<f9900519>] ieee80211_subif_start_xmit+0x2d9/0x930 [mac80211]
  [<c0782e87>] dev_hard_start_xmit+0x307/0x660
  [<c079bb71>] sch_direct_xmit+0xa1/0x1e0
  [<c0784bb3>] dev_queue_xmit+0x183/0x730
  [<c078c27a>] neigh_resolve_output+0xfa/0x1e0
  [<c07b436a>] ip_finish_output+0x24a/0x460
  [<c07b4897>] ip_output+0xb7/0x100
  [<c07b2d60>] ip_local_out+0x20/0x60
  [<c07e01ff>] igmpv3_sendpack+0x4f/0x60
  [<c07e108f>] igmp_ifc_timer_expire+0x29f/0x330
  [<c04520fc>] run_timer_softirq+0x15c/0x2f0
  [<c0449e3e>] __do_softirq+0xae/0x1e0
irq event stamp: 18380437
hardirqs last  enabled at (18380437): [<c0526027>] __slab_alloc.clone.3+0x67/0x5f0
hardirqs last disabled at (18380436): [<c0525ff3>] __slab_alloc.clone.3+0x33/0x5f0
softirqs last  enabled at (18377616): [<c0449eb3>] __do_softirq+0x123/0x1e0
softirqs last disabled at (18377611): [<c041278d>] do_softirq+0x9d/0xe0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&intf->seqlock)->rlock);
  <Interrupt>
    lock(&(&intf->seqlock)->rlock);

 *** DEADLOCK ***

4 locks held by kworker/u:2/30374:
 #0:  (wiphy_name(local->hw.wiphy)){++++.+}, at: [<c045cf99>] process_one_work+0x109/0x3f0
 #1:  ((&sdata->work)){+.+.+.}, at: [<c045cf99>] process_one_work+0x109/0x3f0
 #2:  (&ifibss->mtx){+.+.+.}, at: [<f98f005b>] ieee80211_ibss_work+0x1b/0x470 [mac80211]
 #3:  (&intf->beacon_skb_mutex){+.+...}, at: [<f997a644>] rt2x00queue_update_beacon+0x24/0x50 [rt2x00lib]

stack backtrace:
Pid: 30374, comm: kworker/u:2 Not tainted 3.4.0-wl+ #4
Call Trace:
 [<c04962a6>] print_usage_bug+0x1f6/0x220
 [<c0496a12>] mark_lock+0x2c2/0x300
 [<c0495ff0>] ? check_usage_forwards+0xc0/0xc0
 [<c04978ec>] __lock_acquire+0x4bc/0x1050
 [<c0527890>] ? __kmalloc_track_caller+0x1c0/0x1d0
 [<c0777fb6>] ? copy_skb_header+0x26/0x90
 [<c0498504>] lock_acquire+0x84/0xf0
 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
 [<c0835733>] _raw_spin_lock+0x33/0x40
 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
 [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib]
 [<f997a5cf>] rt2x00queue_update_beacon_locked+0x5f/0xb0 [rt2x00lib]
 [<f997a64d>] rt2x00queue_update_beacon+0x2d/0x50 [rt2x00lib]
 [<f9977e3a>] rt2x00mac_bss_info_changed+0x1ca/0x200 [rt2x00lib]
 [<f9977c70>] ? rt2x00mac_remove_interface+0x70/0x70 [rt2x00lib]
 [<f98e4dd0>] ieee80211_bss_info_change_notify+0xe0/0x1d0 [mac80211]
 [<f98ef7b8>] __ieee80211_sta_join_ibss+0x3b8/0x610 [mac80211]
 [<c0496ab4>] ? mark_held_locks+0x64/0xc0
 [<c0440012>] ? virt_efi_query_capsule_caps+0x12/0x50
 [<f98efb09>] ieee80211_sta_join_ibss+0xf9/0x140 [mac80211]
 [<f98f0456>] ieee80211_ibss_work+0x416/0x470 [mac80211]
 [<c0496d8b>] ? trace_hardirqs_on+0xb/0x10
 [<c077683b>] ? skb_dequeue+0x4b/0x70
 [<f98f207f>] ieee80211_iface_work+0x13f/0x230 [mac80211]
 [<c045cf99>] ? process_one_work+0x109/0x3f0
 [<c045d015>] process_one_work+0x185/0x3f0
 [<c045cf99>] ? process_one_work+0x109/0x3f0
 [<f98f1f40>] ? ieee80211_teardown_sdata+0xa0/0xa0 [mac80211]
 [<c045ed86>] worker_thread+0x116/0x270
 [<c045ec70>] ? manage_workers+0x1e0/0x1e0
 [<c0462f64>] kthread+0x84/0x90
 [<c0462ee0>] ? __init_kthread_worker+0x60/0x60
 [<c083d382>] kernel_thread_helper+0x6/0x10

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/rt2x00/rt2x00.h      |    3 +--
 drivers/net/wireless/rt2x00/rt2x00mac.c   |    1 -
 drivers/net/wireless/rt2x00/rt2x00queue.c |   13 ++++++-------
 3 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index ca36ccc..8f75402 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -396,8 +396,7 @@ struct rt2x00_intf {
 	 * for hardware which doesn't support hardware
 	 * sequence counting.
 	 */
-	spinlock_t seqlock;
-	u16 seqno;
+	atomic_t seqno;
 };
 
 static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index b49773e..dd24b26 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -277,7 +277,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	else
 		rt2x00dev->intf_sta_count++;
 
-	spin_lock_init(&intf->seqlock);
 	mutex_init(&intf->beacon_skb_mutex);
 	intf->beacon = entry;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 4c662ec..2fd8301 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -207,6 +207,7 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev,
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
+	u16 seqno;
 
 	if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
 		return;
@@ -238,15 +239,13 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev,
 	 * sequence counting per-frame, since those will override the
 	 * sequence counter given by mac80211.
 	 */
-	spin_lock(&intf->seqlock);
-
 	if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
-		intf->seqno += 0x10;
-	hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-	hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-
-	spin_unlock(&intf->seqlock);
+		seqno = atomic_add_return(0x10, &intf->seqno);
+	else
+		seqno = atomic_read(&intf->seqno);
 
+	hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+	hdr->seq_ctrl |= cpu_to_le16(seqno);
 }
 
 static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev,

[ 28/69] iwlwifi: disable WoWLAN if !CONFIG_PM_SLEEP

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit fcb6ff5e2cb83e1de10631f6621f45ca3401bf61 upstream.

If CONFIG_PM_SLEEP is disabled, then iwlwifi doesn't
support suspend/resume handlers and thus mac80211
(correctly) refuses advertising WoWLAN. Disable
WoWLAN in the driver in this case.

Reported-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1696,6 +1696,7 @@
 			    WIPHY_FLAG_DISABLE_BEACON_HINTS |
 			    WIPHY_FLAG_IBSS_RSN;
 
+#ifdef CONFIG_PM_SLEEP
 	if (priv->ucode_wowlan.code.len && device_can_wakeup(bus(priv)->dev)) {
 		hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
 					  WIPHY_WOWLAN_DISCONNECT |
@@ -1712,6 +1713,7 @@
 		hw->wiphy->wowlan.pattern_max_len =
 					IWLAGN_WOWLAN_MAX_PATTERN_LEN;
 	}
+#endif
 
 	if (iwlagn_mod_params.power_save)
 		hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;

[ 29/69] ASoC: wm8994: Ensure all AIFnCLK events are run from the _late variants

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit c8fdc1b56611faa7b38eab6b99da5e20113661ff upstream.

Ensure that all the actions get taken at appropriate times by calling the
_PRE and _POST events for the aifNclk_ev functions explicitly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/soc/codecs/wm8994.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 993639d..6d3a865 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -1190,17 +1190,19 @@ static int late_enable_ev(struct snd_soc_dapm_widget *w,
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
 		if (wm8994->aif1clk_enable) {
-			aif1clk_ev(w, kcontrol, event);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
 			snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
 					    WM8994_AIF1CLK_ENA_MASK,
 					    WM8994_AIF1CLK_ENA);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
 			wm8994->aif1clk_enable = 0;
 		}
 		if (wm8994->aif2clk_enable) {
-			aif2clk_ev(w, kcontrol, event);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
 			snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
 					    WM8994_AIF2CLK_ENA_MASK,
 					    WM8994_AIF2CLK_ENA);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
 			wm8994->aif2clk_enable = 0;
 		}
 		break;
@@ -1221,15 +1223,17 @@ static int late_disable_ev(struct snd_soc_dapm_widget *w,
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMD:
 		if (wm8994->aif1clk_disable) {
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
 			snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
 					    WM8994_AIF1CLK_ENA_MASK, 0);
-			aif1clk_ev(w, kcontrol, event);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
 			wm8994->aif1clk_disable = 0;
 		}
 		if (wm8994->aif2clk_disable) {
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
 			snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
 					    WM8994_AIF2CLK_ENA_MASK, 0);
-			aif2clk_ev(w, kcontrol, event);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
 			wm8994->aif2clk_disable = 0;
 		}
 		break;

[ 30/69] ASoC: wm8994: Apply volume updates with clocks enabled

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@opensource.wolfsonmicro.com>

commit bfd37bb5f681961e255fd2f346c20fdae2ef3f27 upstream.

Volume updates may not be acted upon if there is no clock applied when
the volume update is written. Ensure this doesn't happen by writing out
registers with volume updates after we enable each of the clocks.

There are more registers updated than before as previously we were
relying on wm_hubs to set those for controls it manages.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/soc/codecs/wm8994.c |   93 ++++++++++++++++++++++++++++-----------------
 1 file changed, 58 insertions(+), 35 deletions(-)

--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -41,6 +41,39 @@
 #define WM8994_NUM_DRC 3
 #define WM8994_NUM_EQ  3
 
+static struct {
+	unsigned int reg;
+	unsigned int mask;
+} wm8994_vu_bits[] = {
+	{ WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+	{ WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+	{ WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+	{ WM8994_RIGHT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+	{ WM8994_SPEAKER_VOLUME_LEFT, WM8994_SPKOUT_VU },
+	{ WM8994_SPEAKER_VOLUME_RIGHT, WM8994_SPKOUT_VU },
+	{ WM8994_LEFT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+	{ WM8994_RIGHT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+	{ WM8994_LEFT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+	{ WM8994_RIGHT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+
+	{ WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU },
+	{ WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU },
+	{ WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU },
+	{ WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU },
+	{ WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU },
+	{ WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU },
+	{ WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU },
+	{ WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU },
+	{ WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU },
+	{ WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU },
+	{ WM8994_DAC1_RIGHT_VOLUME, WM8994_DAC1_VU },
+	{ WM8994_DAC2_LEFT_VOLUME, WM8994_DAC2_VU },
+	{ WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU },
+};
+
 static int wm8994_drc_base[] = {
 	WM8994_AIF1_DRC1_1,
 	WM8994_AIF1_DRC2_1,
@@ -889,6 +922,7 @@
 	struct snd_soc_codec *codec = w->codec;
 	struct wm8994 *control = codec->control_data;
 	int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA;
+	int i;
 	int dac;
 	int adc;
 	int val;
@@ -947,6 +981,13 @@
 				    WM8994_AIF1DAC2L_ENA);
 		break;
 
+	case SND_SOC_DAPM_POST_PMU:
+		for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+			snd_soc_write(codec, wm8994_vu_bits[i].reg,
+				      snd_soc_read(codec,
+						   wm8994_vu_bits[i].reg));
+		break;
+
 	case SND_SOC_DAPM_PRE_PMD:
 	case SND_SOC_DAPM_POST_PMD:
 		snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
@@ -972,6 +1013,7 @@
 		      struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_codec *codec = w->codec;
+	int i;
 	int dac;
 	int adc;
 	int val;
@@ -1022,6 +1064,13 @@
 				    WM8994_AIF2DACR_ENA);
 		break;
 
+	case SND_SOC_DAPM_POST_PMU:
+		for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+			snd_soc_write(codec, wm8994_vu_bits[i].reg,
+				      snd_soc_read(codec,
+						   wm8994_vu_bits[i].reg));
+		break;
+
 	case SND_SOC_DAPM_PRE_PMD:
 	case SND_SOC_DAPM_POST_PMD:
 		snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
@@ -1470,9 +1519,11 @@
 
 static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = {
 SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev,
-		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		    SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev,
-		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		    SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0,
 		   left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
@@ -3486,39 +3537,11 @@
 
 	wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
-	/* Latch volume updates (right only; we always do left then right). */
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_LEFT_VOLUME,
-			    WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME,
-			    WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC2_LEFT_VOLUME,
-			    WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME,
-			    WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_DAC_LEFT_VOLUME,
-			    WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME,
-			    WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC1_LEFT_VOLUME,
-			    WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME,
-			    WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC2_LEFT_VOLUME,
-			    WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME,
-			    WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_ADC_LEFT_VOLUME,
-			    WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME,
-			    WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_DAC1_LEFT_VOLUME,
-			    WM8994_DAC1_VU, WM8994_DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME,
-			    WM8994_DAC1_VU, WM8994_DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_DAC2_LEFT_VOLUME,
-			    WM8994_DAC2_VU, WM8994_DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME,
-			    WM8994_DAC2_VU, WM8994_DAC2_VU);
+	/* Latch volume update bits */
+	for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+		snd_soc_update_bits(codec, wm8994_vu_bits[i].reg,
+				    wm8994_vu_bits[i].mask,
+				    wm8994_vu_bits[i].mask);
 
 	/* Set the low bit of the 3D stereo depth so TLV matches */
 	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_FILTERS_2,

[ 31/69] iwlwifi: unregister LEDs if mac80211 registration fails

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 0e1fa7ef25004b9c1a14147bce61c15c2f1c6744 upstream.

Otherwise the LEDs stick around and cause issues the
next time around since they're still there but not
really hooked up.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1741,6 +1741,7 @@
 	ret = ieee80211_register_hw(priv->hw);
 	if (ret) {
 		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+		iwl_leds_exit(priv);
 		return ret;
 	}
 	priv->mac80211_registered = 1;

[ 32/69] cfg80211: fix interface combinations check

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 463454b5dbd8dbab6e2fc6c557329e5b811b9c32 upstream.

If a given interface combination doesn't contain
a required interface type then we missed checking
that and erroneously allowed it even though iface
type wasn't there at all. Add a check that makes
sure that all interface types are accounted for.

Reported-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 net/wireless/util.c |   19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index 55d9946..8f2d68f 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -935,6 +935,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 				  enum nl80211_iftype iftype)
 {
 	struct wireless_dev *wdev_iter;
+	u32 used_iftypes = BIT(iftype);
 	int num[NUM_NL80211_IFTYPES];
 	int total = 1;
 	int i, j;
@@ -961,6 +962,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 
 		num[wdev_iter->iftype]++;
 		total++;
+		used_iftypes |= BIT(wdev_iter->iftype);
 	}
 	mutex_unlock(&rdev->devlist_mtx);
 
@@ -970,6 +972,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 	for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
 		const struct ieee80211_iface_combination *c;
 		struct ieee80211_iface_limit *limits;
+		u32 all_iftypes = 0;
 
 		c = &rdev->wiphy.iface_combinations[i];
 
@@ -984,6 +987,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 			if (rdev->wiphy.software_iftypes & BIT(iftype))
 				continue;
 			for (j = 0; j < c->n_limits; j++) {
+				all_iftypes |= limits[j].types;
 				if (!(limits[j].types & BIT(iftype)))
 					continue;
 				if (limits[j].max < num[iftype])
@@ -991,7 +995,20 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 				limits[j].max -= num[iftype];
 			}
 		}
-		/* yay, it fits */
+
+		/*
+		 * Finally check that all iftypes that we're currently
+		 * using are actually part of this combination. If they
+		 * aren't then we can't use this combination and have
+		 * to continue to the next.
+		 */
+		if ((all_iftypes & used_iftypes) != used_iftypes)
+			goto cont;
+
+		/*
+		 * This combination covered all interface types and
+		 * supported the requested numbers, so we're good.
+		 */
 		kfree(limits);
 		return 0;
  cont:

[ 33/69] [SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptible

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "nagalakshmi.nandigama@lsi.com" <nagalakshmi.nandigama@lsi.com>

commit a2c658505bf5c75516ee0a79287223e86a2474af upstream.

When CONFIG_DEBUG_PREEMPT is enabled, bug is observed in the smp_processor_id().
This is because smp_processor_id() is not called in preempt safe condition.

To fix this issue, use raw_smp_processor_id instead of smp_processor_id.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/scsi/mpt2sas/mpt2sas_base.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 6102ef2..9d46fcb 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1792,7 +1792,7 @@ static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
 static inline u8
 _base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
 {
-	return ioc->cpu_msix_table[smp_processor_id()];
+	return ioc->cpu_msix_table[raw_smp_processor_id()];
 }
 
 /**

[ 34/69] net: sierra_net: device IDs for Aircard 320U++

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2582 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit dd03cff23d694cfb0fdae80cb618e7ced05ea696 upstream.

Adding device IDs for Aircard 320U and two other devices
found in the out-of-tree version of this driver.

Cc: linux@sierrawireless.com
Cc: Autif Khan <autif.mlist@gmail.com>
Cc: Tom Cassidy <tomas.cassidy@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/usb/sierra_net.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index 3faef56..d75d1f5 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -946,7 +946,7 @@ struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 }
 
 static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 };
-static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
+static const struct sierra_net_info_data sierra_net_info_data_direct_ip = {
 	.rx_urb_size = 8 * 1024,
 	.whitelist = {
 		.infolen = ARRAY_SIZE(sierra_net_ifnum_list),
@@ -954,7 +954,7 @@ static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
 	}
 };
 
-static const struct driver_info sierra_net_info_68A3 = {
+static const struct driver_info sierra_net_info_direct_ip = {
 	.description = "Sierra Wireless USB-to-WWAN Modem",
 	.flags = FLAG_WWAN | FLAG_SEND_ZLP,
 	.bind = sierra_net_bind,
@@ -962,12 +962,18 @@ static const struct driver_info sierra_net_info_68A3 = {
 	.status = sierra_net_status,
 	.rx_fixup = sierra_net_rx_fixup,
 	.tx_fixup = sierra_net_tx_fixup,
-	.data = (unsigned long)&sierra_net_info_data_68A3,
+	.data = (unsigned long)&sierra_net_info_data_direct_ip,
 };
 
 static const struct usb_device_id products[] = {
 	{USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
-	.driver_info = (unsigned long) &sierra_net_info_68A3},
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
 
 	{}, /* last item */
 };

[ 35/69] ARM: imx6: exit coherency when shutting down a cpu

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shawn Guo <shawn.guo@linaro.org>

commit 602bf40971d7f9a1ec0b7ba2b7e6427849828651 upstream.

There is a system hang issue on imx6q which can easily be seen with
running a cpu hotplug stress testing (hotplug secondary cores from
user space via sysfs interface for thousands iterations).

It turns out that the issue is caused by coherency of the cpu that
is being shut down.  When shutting down a cpu, we need to have the
cpu exit coherency to prevent it from receiving cache, TLB, or BTB
maintenance operations broadcast by other CPUs in the cluster.

Copy cpu_enter_lowpower() and cpu_leave_lowpower() from mach-vexpress
to have coherency properly handled in platform_cpu_die(), thus fix
the issue.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/mach-imx/hotplug.c |   42 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 89493ab..20ed2d5 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -12,6 +12,7 @@
 
 #include <linux/errno.h>
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <mach/common.h>
 
 int platform_cpu_kill(unsigned int cpu)
@@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu)
 	return 1;
 }
 
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
+	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
 	cpu_do_idle();
+	cpu_leave_lowpower();
 
 	/* We should never return from idle */
 	panic("cpu %d unexpectedly exit from shutdown\n", cpu);

[ 36/69] ARM i.MX imx21ads: Fix overlapping static i/o mappings

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>

commit 350ab15bb2ffe7103bc6bf6c634f3c5b286eaf2a upstream.

The statically defined I/O memory regions for the i.MX21 on chip
peripherals and the on board I/O peripherals of the i.MX21ADS board
overlap. This results in a kernel crash during startup. This is fixed
by reducing the memory range for the on board I/O peripherals to the
actually required range.

Signed-off-by: Jaccon Bastiaansen <jaccon.bastiaansen@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 arch/arm/mach-imx/mach-mx21ads.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index e432d4a..4460d25 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -32,7 +32,7 @@
  * Memory-mapped I/O on MX21ADS base board
  */
 #define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
+#define MX21ADS_MMIO_SIZE        0xc00000
 
 #define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
 		(MX21ADS_MMIO_BASE_ADDR + (offset))

[ 37/69] NFSv4: Fix unnecessary delegation returns in nfs4_do_open

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit 2d0dbc6ae8a5194aaecb9cfffb9053f38fce8b86 upstream.

While nfs4_do_open() expects the fmode argument to be restricted to
combinations of FMODE_READ and FMODE_WRITE, both nfs4_atomic_open()
and nfs4_proc_create will pass the nfs_open_context->mode,
which contains the full fmode_t.

This patch ensures that nfs4_do_open strips the other fmode_t bits,
fixing a problem in which the nfs4_do_open call would result in an
unnecessary delegation return.

Reported-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 fs/nfs/nfs4proc.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1825,6 +1825,7 @@
 	struct nfs4_state *res;
 	int status;
 
+	fmode &= FMODE_READ|FMODE_WRITE;
 	do {
 		status = _nfs4_do_open(dir, dentry, fmode, flags, sattr, cred, &res);
 		if (status == 0)

[ 38/69] iwlwifi: use correct supported firmware for 6035 and 6000g2

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>

commit d2c8b15d0cb486f4938ba7f2af349d9d1220cb10 upstream.

My patch

   iwlwifi: use correct released ucode version

did not correctly report supported firmware
for the 6035 device. This patch fixes it. The
minimum supported firmware version for 6035
is v6.

Also correct the minimum supported firmware
version for the 6000g2 series of devices.

Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[bwh: Backported to 3.2:
 - adjust context
 - make IWL_DEVICE_6035 identical for IWL_DEVICE_6030 except for the
   ucode_api_* fields]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -49,17 +49,20 @@
 #define IWL6000_UCODE_API_MAX 6
 #define IWL6050_UCODE_API_MAX 5
 #define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
 
 /* Oldest version we won't warn about */
 #define IWL6000_UCODE_API_OK 4
 #define IWL6000G2_UCODE_API_OK 5
 #define IWL6050_UCODE_API_OK 5
 #define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
 
 /* Lowest firmware API version supported */
 #define IWL6000_UCODE_API_MIN 4
 #define IWL6050_UCODE_API_MIN 4
-#define IWL6000G2_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
 
 #define IWL6000_FW_PRE "iwlwifi-6000-"
 #define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode"
@@ -436,9 +439,24 @@
 	IWL_DEVICE_6030,
 };
 
+#define IWL_DEVICE_6035						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6035_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6035_UCODE_API_OK,			\
+	.ucode_api_min = IWL6035_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.lib = &iwl6030_lib,					\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.need_dc_calib = true,					\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true
+
 struct iwl_cfg iwl6035_2agn_cfg = {
 	.name = "6035 Series 2x2 AGN/BT",
-	IWL_DEVICE_6030,
+	IWL_DEVICE_6035,
 	.ht_params = &iwl6000_ht_params,
 };
 

[ 39/69] iwlwifi: disable the buggy chain extension feature in HW

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit d012d04e4d6312ea157b6cf19e9689af934f5aa7 upstream.

This feature has been reported to be buggy and enabled by
default. We therefore need to disable it manually.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/net/wireless/iwlwifi/iwl-prph.h       |    1 +
 drivers/net/wireless/iwlwifi/iwl-trans-pcie.c |    5 +++++
 2 files changed, 6 insertions(+)

--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -228,6 +228,7 @@
 #define SCD_TXFACT		(SCD_BASE + 0x10)
 #define SCD_ACTIVE		(SCD_BASE + 0x14)
 #define SCD_QUEUECHAIN_SEL	(SCD_BASE + 0xe8)
+#define SCD_CHAINEXT_EN		(SCD_BASE + 0x244)
 #define SCD_AGGR_SEL		(SCD_BASE + 0x248)
 #define SCD_INTERRUPT_MASK	(SCD_BASE + 0x108)
 
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -868,6 +868,11 @@
 	iwl_write_prph(bus(trans), SCD_DRAM_BASE_ADDR,
 		       trans_pcie->scd_bc_tbls.dma >> 10);
 
+	/* The chain extension of the SCD doesn't work well. This feature is
+	 * enabled by default by the HW, so we need to disable it manually.
+	 */
+	iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
+
 	/* Enable DMA channel */
 	for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
 		iwl_write_direct32(bus(trans), FH_TCSR_CHNL_TX_CONFIG_REG(chan),

[ 40/69] ALSA: hda - Add codec->no_jack_detect flag

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 71b1e9e43d5199f57c109e20c0f4dffc5c048130 upstream.

Add a new flag to indicate that the codec has no jack-detection cap.
This flag should be set for hardwares that have no jack-detect
implementation although the codec chip itself supports it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bwh: Backported to 3.2: adjust filename and context for is_jack_detectable()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -858,6 +858,7 @@
 	unsigned int pins_shutup:1;	/* pins are shut up */
 	unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
 	unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
+	unsigned int no_jack_detect:1;	/* Machine has no jack-detection */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	unsigned int power_on :1;	/* current (global) power-state */
 	unsigned int power_transition :1; /* power-state in transition */
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -515,6 +515,8 @@
 
 static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
 {
+	if (codec->no_jack_detect)
+		return false;
 	if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
 		return false;
 	if (!codec->ignore_misc_bit &&

[ 41/69] ALSA: hda - add support for Uniwill ECS M31EI notebook

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jaroslav Kysela <perex@perex.cz>

commit 416846d2b31fc740ed9d5a5ec116964fb43c4358 upstream.

This hardware requires same fixup for the node 0x0f like Asus A6Rp.
More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 485a837..9350f3c 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5627,6 +5627,7 @@ static const struct alc_fixup alc861_fixups[] = {
 
 static const struct snd_pci_quirk alc861_fixup_tbl[] = {
 	SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", PINFIX_ASUS_A6RP),
+	SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", PINFIX_ASUS_A6RP),	
 	SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", PINFIX_ASUS_A6RP),
 	SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505),
 	{}

[ 42/69] ALSA: hda - Suppress auto-mute feature on some machines with ALC861

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit e652f4c861fb7f1f59ff0828db0d85578471932d upstream.

A few machines with ALC861 & co are reported not to work properly with
the auto-mute feature in software.  The auto-mute feature is implemented
in the hardware level, and the jack-detection never works with them.

Also, rename the fixup index as ALC861_FIXUP_* to follow the standard.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/hda/patch_realtek.c |   38 ++++++++++++++++++++++++++++++--------
 1 file changed, 30 insertions(+), 8 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 4a2a49f..c630598 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5563,8 +5563,10 @@ static const struct hda_amp_list alc861_loopbacks[] = {
 
 /* Pin config fixes */
 enum {
-	PINFIX_FSC_AMILO_PI1505,
-	PINFIX_ASUS_A6RP,
+	ALC861_FIXUP_FSC_AMILO_PI1505,
+	ALC861_FIXUP_AMP_VREF_0F,
+	ALC861_FIXUP_NO_JACK_DETECT,
+	ALC861_FIXUP_ASUS_A6RP,
 };
 
 /* On some laptops, VREF of pin 0x0f is abused for controlling the main amp */
@@ -5586,8 +5588,16 @@ static void alc861_fixup_asus_amp_vref_0f(struct hda_codec *codec,
 	spec->keep_vref_in_automute = 1;
 }
 
+/* suppress the jack-detection */
+static void alc_fixup_no_jack_detect(struct hda_codec *codec,
+				     const struct alc_fixup *fix, int action)
+{
+	if (action == ALC_FIXUP_ACT_PRE_PROBE)
+		codec->no_jack_detect = 1;
+}	
+
 static const struct alc_fixup alc861_fixups[] = {
-	[PINFIX_FSC_AMILO_PI1505] = {
+	[ALC861_FIXUP_FSC_AMILO_PI1505] = {
 		.type = ALC_FIXUP_PINS,
 		.v.pins = (const struct alc_pincfg[]) {
 			{ 0x0b, 0x0221101f }, /* HP */
@@ -5595,17 +5605,29 @@ static const struct alc_fixup alc861_fixups[] = {
 			{ }
 		}
 	},
-	[PINFIX_ASUS_A6RP] = {
+	[ALC861_FIXUP_AMP_VREF_0F] = {
 		.type = ALC_FIXUP_FUNC,
 		.v.func = alc861_fixup_asus_amp_vref_0f,
 	},
+	[ALC861_FIXUP_NO_JACK_DETECT] = {
+		.type = ALC_FIXUP_FUNC,
+		.v.func = alc_fixup_no_jack_detect,
+	},
+	[ALC861_FIXUP_ASUS_A6RP] = {
+		.type = ALC_FIXUP_FUNC,
+		.v.func = alc861_fixup_asus_amp_vref_0f,
+		.chained = true,
+		.chain_id = ALC861_FIXUP_NO_JACK_DETECT,
+	}
 };
 
 static const struct snd_pci_quirk alc861_fixup_tbl[] = {
-	SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", PINFIX_ASUS_A6RP),
-	SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", PINFIX_ASUS_A6RP),	
-	SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", PINFIX_ASUS_A6RP),
-	SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505),
+	SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP),
+	SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F),
+	SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT),
+	SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", ALC861_FIXUP_AMP_VREF_0F),
+	SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", ALC861_FIXUP_AMP_VREF_0F),
+	SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", ALC861_FIXUP_FSC_AMILO_PI1505),
 	{}
 };
 

[ 43/69] ALSA: hda - Add another jack-detection suppression for ASUS ALC892

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 1565cc358585be40608b46f18f7ac431a1aae2bc upstream.

Add the jack-detect suppression for an ASUS machine with ALC892 codec.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/hda/patch_realtek.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c630598..30ef877 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5875,6 +5875,7 @@ enum {
 	ALC662_FIXUP_ASUS_MODE6,
 	ALC662_FIXUP_ASUS_MODE7,
 	ALC662_FIXUP_ASUS_MODE8,
+	ALC662_FIXUP_NO_JACK_DETECT,
 };
 
 static const struct alc_fixup alc662_fixups[] = {
@@ -6020,6 +6021,10 @@ static const struct alc_fixup alc662_fixups[] = {
 		.chained = true,
 		.chain_id = ALC662_FIXUP_SKU_IGNORE
 	},
+	[ALC662_FIXUP_NO_JACK_DETECT] = {
+		.type = ALC_FIXUP_FUNC,
+		.v.func = alc_fixup_no_jack_detect,
+	},
 };
 
 static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -6028,6 +6033,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x031c, "Gateway NV79", ALC662_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
+	SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT),
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_FIXUP_ASUS_MODE2),
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),

[ 44/69] ALSA: HDA: Pin fixup for Zotac Z68 motherboard

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit edfe3bfc1b779ddda9bcff523eb022dda37b93c8 upstream.

Pin 0x1b was connected to the front panel connector, which according to
the HDA standard should contain a mic and a headphone. In this case,
the headphone was listed as "line out" by BIOS.

BugLink: https://bugs.launchpad.net/bugs/993162
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 sound/pci/hda/patch_realtek.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 224410e..b896681 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6439,6 +6439,7 @@ enum {
 	ALC662_FIXUP_ASUS_MODE7,
 	ALC662_FIXUP_ASUS_MODE8,
 	ALC662_FIXUP_NO_JACK_DETECT,
+	ALC662_FIXUP_ZOTAC_Z68,
 };
 
 static const struct alc_fixup alc662_fixups[] = {
@@ -6588,6 +6589,13 @@ static const struct alc_fixup alc662_fixups[] = {
 		.type = ALC_FIXUP_FUNC,
 		.v.func = alc_fixup_no_jack_detect,
 	},
+	[ALC662_FIXUP_ZOTAC_Z68] = {
+		.type = ALC_FIXUP_PINS,
+		.v.pins = (const struct alc_pincfg[]) {
+			{ 0x1b, 0x02214020 }, /* Front HP */
+			{ }
+		}
+	},
 };
 
 static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -6601,6 +6609,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
+	SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68),
 	SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
 
 #if 0

[ 45/69] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2155 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit fec67b45bf045582c3172101970090d640cd56d9 upstream.

[v2: Editorial changes suggested by Sergei Shtylyov]

These modems use the Qualcomm MSM Interface (QMI) protocol for
management of their CDC ECM like wwan interface.  This driver
is perfect for exporting the protocol to userspace.

The created character device will be indistinguishable from a
common AT command based Device Management interface, so
userspace applications must do some intelligent matching
on the USB device.

Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/class/cdc-wdm.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index c154d4f..23cf9d3 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -31,6 +31,8 @@
 #define DRIVER_AUTHOR "Oliver Neukum"
 #define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management"
 
+#define HUAWEI_VENDOR_ID	0x12D1
+
 static const struct usb_device_id wdm_ids[] = {
 	{
 		.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
@@ -38,6 +40,20 @@ static const struct usb_device_id wdm_ids[] = {
 		.bInterfaceClass = USB_CLASS_COMM,
 		.bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
 	},
+	{
+		/* 
+		 * Huawei E392, E398 and possibly other Qualcomm based modems
+		 * embed the Qualcomm QMI protocol inside CDC on CDC ECM like
+		 * control interfaces.  Userspace access to this is required
+		 * to configure the accompanying data interface
+		 */
+		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+					USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = HUAWEI_VENDOR_ID,
+		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+		.bInterfaceSubClass = 1,
+		.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
+	},
 	{ }
 };
 

[ 46/69] USB: cdc-wdm: Add Vodafone/Huawei K5005 support

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1187 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit de102ef41f24a4c251c4a3838796bb27557d4d93 upstream.

Tested-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/class/cdc-wdm.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index ea8b304..8fd398d 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -55,6 +55,15 @@ static const struct usb_device_id wdm_ids[] = {
 		.bInterfaceSubClass = 1,
 		.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
 	},
+	{
+		 /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+				      USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = HUAWEI_VENDOR_ID,
+		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+		.bInterfaceSubClass = 1,
+		.bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
+	},
 	{ }
 };
 

[ 47/69] USB: option: Add Vodafone/Huawei K5005 support

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1886 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 4cbbb039a9719fb3bba73d255c6a95bc6dc6428b upstream.

Tested-by: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 1aae902..f3e4a47 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -150,6 +150,7 @@ static void option_instat_callback(struct urb *urb);
 #define HUAWEI_PRODUCT_E14AC			0x14AC
 #define HUAWEI_PRODUCT_K3806			0x14AE
 #define HUAWEI_PRODUCT_K4605			0x14C6
+#define HUAWEI_PRODUCT_K5005			0x14C8
 #define HUAWEI_PRODUCT_K3770			0x14C9
 #define HUAWEI_PRODUCT_K3771			0x14CA
 #define HUAWEI_PRODUCT_K4510			0x14CB
@@ -666,6 +667,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },

[ 48/69] USB: qcserial: Add Sierra Wireless device IDs

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1634 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit c41444ccfa33a1c20efa319e554cb531576e64a2 upstream.

Some additional IDs found in the BSD/GPL licensed out-of-tree
GobiSerial driver from Sierra Wireless.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/qcserial.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 0d5fe59..996015c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -105,7 +105,13 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
 	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
 	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
+	{USB_DEVICE(0x1199, 0x9010)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9012)},	/* Sierra Wireless Gobi 3000 QDL */
 	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{USB_DEVICE(0x1199, 0x9014)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{USB_DEVICE(0x1199, 0x9018)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
 	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{ }				/* Terminating entry */

[ 49/69] USB: ftdi-sio: Add support for RT Systems USB-RTS01 serial adapter

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Evan McNabb <evan@mcnabbs.org>

commit e00a54d772210d450e5c1a801534c3c8a448549f upstream.

Add support for RT Systems USB-RTS01 USB to Serial adapter:
http://www.rtsystemsinc.com/Photos/USBRTS01.html

Tested by controlling Icom IC-718 amateur radio transceiver via hamlib.

Signed-off-by: Evan McNabb <evan@mcnabbs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8c084ea..bc912e5 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -737,6 +737,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index f3c7c78..5661c7e 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -784,6 +784,7 @@
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
 #define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID		0x9e57	/* USB-RTS01 Radio Cable */
 
 
 /*

[ 50/69] USB: serial: cp210x: add Optris MS Pro usb id

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikko Tuumanen <mikko.tuumanen@qemsoftware.com>

commit 5bbfa6f427c1d7244a5ee154ab8fa37265a5e049 upstream.

Signed-off-by: Mikko Tuumanen <mikko.tuumanen@qemsoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 1b19262..73d25cd 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -82,6 +82,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
 	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+	{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */

[ 51/69] USB: serial: sierra: Add support for Sierra Wireless AirCard 320U modem

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tom Cassidy <tomas.cassidy@gmail.com>

commit 19a3dd1575e954e8c004413bee3e12d3962f2525 upstream.

Add support for Sierra Wireless AirCard 320U modem

Signed-off-by: Tomas Cassidy <tomas.cassidy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/sierra.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ba54a0a..d423d36 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -294,6 +294,10 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	/* AT&T Direct IP LTE modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
 	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},

[ 52/69] USB: option: Updated Huawei K4605 has better id

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Bird <ajb@spheresystems.co.uk>

commit 42ca7da1c2363dbef4ba1b6917c4c02274b6a5e2 upstream.

Later firmwares for this device now have proper subclass and
protocol info so we can identify it nicely without needing to use
the blacklist. I'm not removing the old 0xff matching as there
may be devices in the field that still need that.

Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f3e4a47..d9cb552 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -667,6 +667,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },

[ 53/69] USB: mct_u232: Fix incorrect TIOCMSET return

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Cox <alan@linux.intel.com>

commit 1aa3c63cf0a79153ee13c8f82e4eb6c40b66a161 upstream.

The low level helper returns 1 on success. The ioctl should however return
0. As this is the only user of the helper return, make the helper return 0 or
an error code.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43009
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/mct_u232.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d0ec1aa..a71fa0a 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -309,13 +309,16 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
 			MCT_U232_SET_REQUEST_TYPE,
 			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
 			WDR_TIMEOUT);
-	if (rc < 0)
-		dev_err(&serial->dev->dev,
-			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+	kfree(buf);
+
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
-	kfree(buf);
-	return rc;
+	if (rc < 0) {
+		dev_err(&serial->dev->dev,
+			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+		return rc;
+	}
+	return 0;
 } /* mct_u232_set_modem_ctrl */
 
 static int mct_u232_get_modem_stat(struct usb_serial *serial,

[ 54/69] USB: option: fix port-data abuse

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 4273f9878b0a8271df055e3c8f2e7f08c6a4a2f4 upstream.

Commit 8b4c6a3ab596961b78465 ("USB: option: Use generic USB wwan code")
moved option port-data allocation to usb_wwan_startup but still cast the
port data to the old struct...

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |   34 +++-------------------------------
 1 file changed, 3 insertions(+), 31 deletions(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1273,35 +1273,6 @@
 
 static int debug;
 
-/* per port private data */
-
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-#define OUT_BUFLEN 4096
-
-struct option_port_private {
-	/* Input endpoints and buffer for this port */
-	struct urb *in_urbs[N_IN_URB];
-	u8 *in_buffer[N_IN_URB];
-	/* Output endpoints and buffer for this port */
-	struct urb *out_urbs[N_OUT_URB];
-	u8 *out_buffer[N_OUT_URB];
-	unsigned long out_busy;		/* Bit vector of URBs in use */
-	int opened;
-	struct usb_anchor delayed;
-
-	/* Settings for the port */
-	int rts_state;	/* Handshaking pins (outputs) */
-	int dtr_state;
-	int cts_state;	/* Handshaking pins (inputs) */
-	int dsr_state;
-	int dcd_state;
-	int ri_state;
-
-	unsigned long tx_start_time[N_OUT_URB];
-};
-
 /* Functions used by new usb-serial code. */
 static int __init option_init(void)
 {
@@ -1404,7 +1375,8 @@
 	int err;
 	int status = urb->status;
 	struct usb_serial_port *port =  urb->context;
-	struct option_port_private *portdata = usb_get_serial_port_data(port);
+	struct usb_wwan_port_private *portdata =
+					usb_get_serial_port_data(port);
 
 	dbg("%s", __func__);
 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
@@ -1465,7 +1437,7 @@
 	struct usb_serial *serial = port->serial;
 	struct usb_wwan_intf_private *intfdata =
 		(struct usb_wwan_intf_private *) serial->private;
-	struct option_port_private *portdata;
+	struct usb_wwan_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 	dbg("%s", __func__);

[ 55/69] USB: option: fix memory leak

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit b9c3aab315b51f81649a0d737c4c73783fbd8de0 upstream.

Fix memory leak introduced by commit 383cedc3bb435de7a2 ("USB: serial:
full autosuspend support for the option driver") which allocates
usb-serial data but never frees it.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9c2f7b2..d12ee2f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -47,6 +47,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
+static void option_release(struct usb_serial *serial);
 static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 
@@ -1251,7 +1252,7 @@ static struct usb_serial_driver option_1port_device = {
 	.ioctl             = usb_wwan_ioctl,
 	.attach            = usb_wwan_startup,
 	.disconnect        = usb_wwan_disconnect,
-	.release           = usb_wwan_release,
+	.release           = option_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
 	.suspend           = usb_wwan_suspend,
@@ -1333,6 +1334,15 @@ static int option_probe(struct usb_serial *serial,
 	return 0;
 }
 
+static void option_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	usb_wwan_release(serial);
+
+	kfree(priv);
+}
+
 static void option_instat_callback(struct urb *urb)
 {
 	int err;

[ 56/69] USB: option: add more YUGA device ids

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3636 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: 说不得 <gavin.kx@qq.com>

commit 0ef0be15fd2564767f114c249fc4af704d8e16f4 upstream.

Signed-off-by: gavin zhu <gavin.zhu@qq.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/option.c |   44 ++++++++++++++++++++++++++-----------------
 1 file changed, 27 insertions(+), 17 deletions(-)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d12ee2f..e668a24 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -427,7 +427,7 @@ static void option_instat_callback(struct urb *urb);
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889
 
-/* YUGA products  www.yuga-info.com*/
+/* YUGA products  www.yuga-info.com gavin.kx@qq.com */
 #define YUGA_VENDOR_ID				0x257A
 #define YUGA_PRODUCT_CEM600			0x1601
 #define YUGA_PRODUCT_CEM610			0x1602
@@ -444,6 +444,8 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CEU516			0x160C
 #define YUGA_PRODUCT_CEU528			0x160D
 #define YUGA_PRODUCT_CEU526			0x160F
+#define YUGA_PRODUCT_CEU881			0x161F
+#define YUGA_PRODUCT_CEU882			0x162F
 
 #define YUGA_PRODUCT_CWM600			0x2601
 #define YUGA_PRODUCT_CWM610			0x2602
@@ -459,23 +461,26 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CWU518			0x260B
 #define YUGA_PRODUCT_CWU516			0x260C
 #define YUGA_PRODUCT_CWU528			0x260D
+#define YUGA_PRODUCT_CWU581			0x260E
 #define YUGA_PRODUCT_CWU526			0x260F
-
-#define YUGA_PRODUCT_CLM600			0x2601
-#define YUGA_PRODUCT_CLM610			0x2602
-#define YUGA_PRODUCT_CLM500			0x2603
-#define YUGA_PRODUCT_CLM510			0x2604
-#define YUGA_PRODUCT_CLM800			0x2605
-#define YUGA_PRODUCT_CLM900			0x2606
-
-#define YUGA_PRODUCT_CLU718			0x2607
-#define YUGA_PRODUCT_CLU716			0x2608
-#define YUGA_PRODUCT_CLU728			0x2609
-#define YUGA_PRODUCT_CLU726			0x260A
-#define YUGA_PRODUCT_CLU518			0x260B
-#define YUGA_PRODUCT_CLU516			0x260C
-#define YUGA_PRODUCT_CLU528			0x260D
-#define YUGA_PRODUCT_CLU526			0x260F
+#define YUGA_PRODUCT_CWU582			0x261F
+#define YUGA_PRODUCT_CWU583			0x262F
+
+#define YUGA_PRODUCT_CLM600			0x3601
+#define YUGA_PRODUCT_CLM610			0x3602
+#define YUGA_PRODUCT_CLM500			0x3603
+#define YUGA_PRODUCT_CLM510			0x3604
+#define YUGA_PRODUCT_CLM800			0x3605
+#define YUGA_PRODUCT_CLM900			0x3606
+
+#define YUGA_PRODUCT_CLU718			0x3607
+#define YUGA_PRODUCT_CLU716			0x3608
+#define YUGA_PRODUCT_CLU728			0x3609
+#define YUGA_PRODUCT_CLU726			0x360A
+#define YUGA_PRODUCT_CLU518			0x360B
+#define YUGA_PRODUCT_CLU516			0x360C
+#define YUGA_PRODUCT_CLU528			0x360D
+#define YUGA_PRODUCT_CLU526			0x360F
 
 /* Viettel products */
 #define VIETTEL_VENDOR_ID			0x2262
@@ -1216,6 +1221,11 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */

[ 57/69] target: Return error to initiator if SET TARGET PORT GROUPS emulation fails

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roland Dreier <roland@purestorage.com>

commit 59e4f541baf728dbb426949bfa9f6862387ffd0e upstream.

The error paths in target_emulate_set_target_port_groups() are all
essentially "rc = -EINVAL; goto out;" but the code at "out:" ignores
rc and always returns success.  This means that even if eg explicit
ALUA is turned off, the initiator will always see a good SCSI status
for SET TARGET PORT GROUPS.

Fix this by returning rc as is intended.  It appears this bug was
added by the following patch:

commit 05d1c7c0d0db4cc25548d9aadebb416888a82327
Author: Andy Grover <agrover@redhat.com>
Date:   Wed Jul 20 19:13:28 2011 +0000

    target: Make all control CDBs scatter-gather

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
[bwh: Backported to 3.2: we have transport_complete_task()
 and not target_complete_cmd()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/target/target_core_alua.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -352,9 +352,11 @@
 
 out:
 	transport_kunmap_data_sg(cmd);
-	task->task_scsi_status = GOOD;
-	transport_complete_task(task, 1);
-	return 0;
+	if (!rc) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
+	return rc;
 }
 
 static inline int core_alua_state_nonoptimized(

[ 58/69] USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 5987 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit c2fb8a3fa25513de8fedb38509b1f15a5bbee47b upstream.

This patch (as1558) fixes a problem affecting several ASUS computers:
The machine crashes or corrupts memory when going into suspend if the
ehci-hcd driver is bound to any controllers.  Users have been forced
to unbind or unload ehci-hcd before putting their systems to sleep.

After extensive testing, it was determined that the machines don't
like going into suspend when any EHCI controllers are in the PCI D3
power state.  Presumably this is a firmware bug, but there's nothing
we can do about it except to avoid putting the controllers in D3
during system sleep.

The patch adds a new flag to indicate whether the problem is present,
and avoids changing the controller's power state if the flag is set.
Runtime suspend is unaffected; this matters only for system suspend.
However as a side effect, the controller will not respond to remote
wakeup requests while the system is asleep.  Hence USB wakeup is not
functional -- but of course, this is already true in the current state
of affairs.

A similar patch has already been applied as commit
151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during
suspend on ASUS computers).  The patch supersedes that one and reverts
it.  There are two differences:

	The old patch added the flag at the USB level; this patch
	adds it at the PCI level.

	The old patch applied to all chipsets with the same vendor,
	subsystem vendor, and product IDs; this patch makes an
	exception for a known-good system (based on DMI information).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dâniel Fraga <fragabr@gmail.com>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/pci/pci.c           |    5 +++++
 drivers/pci/quirks.c        |   26 ++++++++++++++++++++++++++
 drivers/usb/core/hcd-pci.c  |    9 ---------
 drivers/usb/host/ehci-pci.c |    8 --------
 include/linux/pci.h         |    2 ++
 include/linux/usb/hcd.h     |    2 --
 6 files changed, 33 insertions(+), 19 deletions(-)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1689,6 +1689,11 @@
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
+	/* Some devices mustn't be in D3 during system sleep */
+	if (target_state == PCI_D3hot &&
+			(dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
+		return 0;
+
 	pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
 
 	error = pci_set_power_state(dev, target_state);
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2940,6 +2940,32 @@
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
 
+/*
+ * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
+ * ASUS motherboards will cause memory corruption or a system crash
+ * if they are in D3 while the system is put into S3 sleep.
+ */
+static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
+{
+	const char *sys_info;
+	static const char good_Asus_board[] = "P8Z68-V";
+
+	if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
+		return;
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
+		return;
+	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+	if (sys_info && memcmp(sys_info, good_Asus_board,
+			sizeof(good_Asus_board) - 1) == 0)
+		return;
+
+	dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
+	dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
+	device_set_wakeup_capable(&dev->dev, false);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -495,15 +495,6 @@
 
 	pci_save_state(pci_dev);
 
-	/*
-	 * Some systems crash if an EHCI controller is in D3 during
-	 * a sleep transition.  We have to leave such controllers in D0.
-	 */
-	if (hcd->broken_pci_sleep) {
-		dev_dbg(dev, "Staying in PCI D0\n");
-		return retval;
-	}
-
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,14 +144,6 @@
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
-		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
-			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
-			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
-				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
-				hcd->broken_pci_sleep = 1;
-				device_set_wakeup_capable(&pdev->dev, false);
-			}
-		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -176,6 +176,8 @@
 	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 	/* Provide indication device is assigned by a Virtual Machine Manager */
 	PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
+	/* Device causes system crash if in D3 during S3 sleep */
+	PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
 };
 
 enum pci_irq_reroute_variant {
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -128,8 +128,6 @@
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
-	unsigned		broken_pci_sleep:1;	/* Don't put the
-			controller in PCI-D3 for system sleep */
 
 	int			irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */

[ 59/69] USB: serial: Enforce USB driver and USB serial driver match

[Ben Hutchings]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 8142 bytes --]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 954c3f8a5f1b7716be9eee978b3bc85bae92d7c8 upstream.

We need to make sure that the USB serial driver we find
matches the USB driver whose probe we are currently
executing. Otherwise we will end up with USB serial
devices bound to the correct serial driver but wrong
USB driver.

An example of such cross-probing, where the usbserial_generic
USB driver has found the sierra serial driver:

May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected
May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected
May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected

sysfs view of the same problem:

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/
total 0
--w------- 1 root root 4096 May 29 18:23 bind
lrwxrwxrwx 1 root root    0 May 29 18:23 module -> ../../../../module/sierra
-rw-r--r-- 1 root root 4096 May 29 18:23 new_id
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1
lrwxrwxrwx 1 root root    0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2
--w------- 1 root root 4096 May 29 18:23 uevent
--w------- 1 root root 4096 May 29 18:23 unbind

bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/
total 0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2
lrwxrwxrwx 1 root root    0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind
bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/
total 0
--w------- 1 root root 4096 May 29 18:33 bind
lrwxrwxrwx 1 root root    0 May 29 18:33 module -> ../../../../module/usbserial
-rw-r--r-- 1 root root 4096 May 29 18:33 new_id
--w------- 1 root root 4096 May 29 18:22 uevent
--w------- 1 root root 4096 May 29 18:33 unbind

So we end up with a mismatch between the USB driver and the
USB serial driver.  The reason for the above is simple: The
USB driver probe will succeed if *any* registered serial
driver matches, and will use that serial driver for all
serial driver functions.

This makes ref counting go wrong. We count the USB driver
as used, but not the USB serial driver.  This may result
in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>:

[11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1
[11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0
[11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0
[11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0
[11812.264197] USB Serial deregistering driver FTDI USB Serial Device
[11812.264865] usbcore: deregistering interface driver ftdi_sio
[11812.282180] USB Serial deregistering driver pl2303
[11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[11812.283272] usbcore: deregistering interface driver pl2303
[11812.301056] USB Serial deregistering driver generic
[11812.301186] usbcore: deregistering interface driver usbserial_generic
[11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect
[11812.301823] BUG: unable to handle kernel paging request at f8e7438c
[11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.301871] *pde = 357ef067 *pte = 00000000
[11812.301957] Oops: 0000 [#1] PREEMPT SMP
[11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303]
[11812.302008]
[11812.302019] Pid: 1323, comm: modprobe Tainted: G        W    3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J
[11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1
[11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial]
[11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300
[11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58
[11812.302160]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0
[11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[11812.302189] DR6: ffff0ff0 DR7: 00000400
[11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000)
[11812.302209] Stack:
[11812.302216]  f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540
[11812.302325]  f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450
[11812.302372]  f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590
[11812.302419] Call Trace:
[11812.302439]  [<c133d2c1>] usb_unbind_interface+0x51/0x190
[11812.302456]  [<c12f0344>] __device_release_driver+0x64/0xb0
[11812.302469]  [<c12f0c67>] driver_detach+0x97/0xa0
[11812.302483]  [<c12f001c>] bus_remove_driver+0x6c/0xe0
[11812.302500]  [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140
[11812.302514]  [<c12f0ff9>] driver_unregister+0x49/0x80
[11812.302528]  [<c1457df6>] ? printk+0x1d/0x1f
[11812.302540]  [<c133c50d>] usb_deregister+0x5d/0xb0
[11812.302557]  [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial]
[11812.302575]  [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial]
[11812.302593]  [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial]
[11812.302611]  [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial]
[11812.302716]  [<c1080b48>] sys_delete_module+0x158/0x260
[11812.302730]  [<c110594e>] ? mntput+0x1e/0x30
[11812.302746]  [<c145c3c3>] ? sysenter_exit+0xf/0x18
[11812.302746]  [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170
[11812.302746]  [<c145c390>] sysenter_do_call+0x12/0x36
[11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f
[11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58
[11812.302746] CR2: 00000000f8e7438c

Fix by only evaluating serial drivers pointing back to the
USB driver we are currently probing.  This still allows two
or more drivers to match the same device, running their
serial driver probes to sort out which one to use.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Tested-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/serial/usb-serial.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 6a1b609..6e8c527 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -659,12 +659,14 @@ exit:
 static struct usb_serial_driver *search_serial_device(
 					struct usb_interface *iface)
 {
-	const struct usb_device_id *id;
+	const struct usb_device_id *id = NULL;
 	struct usb_serial_driver *drv;
+	struct usb_driver *driver = to_usb_driver(iface->dev.driver);
 
 	/* Check if the usb id matches a known device */
 	list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
-		id = get_iface_id(drv, iface);
+		if (drv->usb_driver == driver)
+			id = get_iface_id(drv, iface);
 		if (id)
 			return drv;
 	}

[ 60/69] usb-storage: Add 090c:1000 to unusal-devs

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit afff07e61a5243e14ee3f0a272a0380cd744a8a3 upstream.

This device gives a bogus answer to get_capacity(16):
[ 8628.278614] scsi 8:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  1100 PQ: 0 ANSI: 4
[ 8628.279452] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 8628.280338] sd 8:0:0:0: [sdd] 35747322042253313 512-byte logical blocks: (18.3 EB/15.8 EiB)

So set the quirk flag to avoid using get_capacity(16) with it:
[11731.386014] usb-storage 2-1.6:1.0: Quirks match for vid 090c pid 1000: 80000
[11731.386075] scsi9 : usb-storage 2-1.6:1.0
[11731.386172] usbcore: registered new interface driver usb-storage
[11731.386175] USB Mass Storage support registered.
[11732.387394] scsi 9:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  1100 PQ: 0 ANSI: 4
[11732.388462] sd 9:0:0:0: Attached scsi generic sg3 type 0
[11732.389432] sd 9:0:0:0: [sdc] 7975296 512-byte logical blocks: (4.08 GB/3.80 GiB)

Which makes the capacity look a lot more sane :)

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Simon Raffeiner <sturmflut@lieberbiber.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/storage/unusual_devs.h |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1719886..caf22bf 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1107,6 +1107,13 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		USB_SC_RBC, USB_PR_BULK, NULL,
 		0 ),
 
+/* Feiya QDI U2 DISK, reported by Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff,
+		"Feiya",
+		"QDI U2 DISK",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_READ_CAPACITY_16 ),
+
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		"Feiya",

[ 61/69] xhci: Fix invalid loop check in xhci_free_tt_info()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 46ed8f00d8982e49f8fe2c1a9cea192f640cb3ba upstream.

xhci_free_tt_info() may access the invalid memory when it removes the
last entry but the list is not empty.  Then tt_next reaches to the
list head but it still tries to check the tt_info of that entry.

This patch fixes the bug and cleans up the messy code by rewriting
with a simple list_for_each_entry_safe().

This patch should be backported to kernels as old as 3.2, that contain
the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store
information about roothubs and TTs."

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/xhci-mem.c |   39 ++++++++++-----------------------------
 1 file changed, 10 insertions(+), 29 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index ec4338e..898dfc8 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -793,10 +793,9 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci,
 		struct xhci_virt_device *virt_dev,
 		int slot_id)
 {
-	struct list_head *tt;
 	struct list_head *tt_list_head;
-	struct list_head *tt_next;
-	struct xhci_tt_bw_info *tt_info;
+	struct xhci_tt_bw_info *tt_info, *next;
+	bool slot_found = false;
 
 	/* If the device never made it past the Set Address stage,
 	 * it may not have the real_port set correctly.
@@ -808,34 +807,16 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci,
 	}
 
 	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
-	if (list_empty(tt_list_head))
-		return;
-
-	list_for_each(tt, tt_list_head) {
-		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
-		if (tt_info->slot_id == slot_id)
+	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+		/* Multi-TT hubs will have more than one entry */
+		if (tt_info->slot_id == slot_id) {
+			slot_found = true;
+			list_del(&tt_info->tt_list);
+			kfree(tt_info);
+		} else if (slot_found) {
 			break;
+		}
 	}
-	/* Cautionary measure in case the hub was disconnected before we
-	 * stored the TT information.
-	 */
-	if (tt_info->slot_id != slot_id)
-		return;
-
-	tt_next = tt->next;
-	tt_info = list_entry(tt, struct xhci_tt_bw_info,
-			tt_list);
-	/* Multi-TT hubs will have more than one entry */
-	do {
-		list_del(tt);
-		kfree(tt_info);
-		tt = tt_next;
-		if (list_empty(tt_list_head))
-			break;
-		tt_next = tt->next;
-		tt_info = list_entry(tt, struct xhci_tt_bw_info,
-				tt_list);
-	} while (tt_info->slot_id == slot_id);
 }
 
 int xhci_alloc_tt_info(struct xhci_hcd *xhci,

[ 62/69] xhci: Dont free endpoints in xhci_mem_cleanup()

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 32f1d2c536d0c26c5814cb0e6a0606c42d02fac1 upstream.

This patch fixes a few issues introduced in the recent fix
[f8a9e72d: USB: fix resource leak in xhci power loss path]

- The endpoints listed in bw table are just links and each entry is an
 array member of dev->eps[].  But the commit above adds a kfree() call
 to these instances, and thus it results in memory corruption.

- It clears only the first entry of rh_bw[], but there can be multiple
  ports.

- It'd be safer to clear the list_head of ep as well, not only
  removing from the list, as it's checked in
  xhci_discover_or_reset_device().

This patch should be backported to kernels as old as 3.2, that contain
the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store
information about roothubs and TTs."

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/xhci-mem.c |   35 ++++++++++++++---------------------
 1 file changed, 14 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 898dfc8..77689bd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1772,17 +1772,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	struct dev_info	*dev_info, *next;
-	struct list_head *tt_list_head;
-	struct list_head *tt;
-	struct list_head *endpoints;
-	struct list_head *ep, *q;
-	struct xhci_tt_bw_info *tt_info;
-	struct xhci_interval_bw_table *bwt;
-	struct xhci_virt_ep *virt_ep;
-
 	unsigned long	flags;
 	int size;
-	int i;
+	int i, j, num_ports;
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -1841,21 +1833,22 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
-	bwt = &xhci->rh_bw->bw_table;
-	for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
-		endpoints = &bwt->interval_bw[i].endpoints;
-		list_for_each_safe(ep, q, endpoints) {
-			virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
-			list_del(&virt_ep->bw_endpoint_list);
-			kfree(virt_ep);
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+			struct list_head *ep = &bwt->interval_bw[j].endpoints;
+			while (!list_empty(ep))
+				list_del_init(ep->next);
 		}
 	}
 
-	tt_list_head = &xhci->rh_bw->tts;
-	list_for_each_safe(tt, q, tt_list_head) {
-		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
-		list_del(tt);
-		kfree(tt_info);
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_tt_bw_info *tt, *n;
+		list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
+			list_del(&tt->tt_list);
+			kfree(tt);
+		}
 	}
 
 	xhci->num_usb2_ports = 0;

[ 63/69] xHCI: Increase the timeout for controller save/restore state operation

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andiry Xu <andiry.xu@gmail.com>

commit 622eb783fe6ff4c1baa47db16c3a5db97f9e6e50 upstream.

When system software decides to power down the xHC with the intent of
resuming operation at a later time, it will ask xHC to save the internal
state and restore it when resume to correctly recover from a power event.
Two bits are used to enable this operation: Save State and Restore State.

xHCI spec 4.23.2 says software should "Set the Controller Save/Restore
State flag in the USBCMD register and wait for the Save/Restore State
Status flag in the USBSTS register to transition to '0'". However, it does
not define how long software should wait for the SSS/RSS bit to transition
to 0.

Currently the timeout is set to 1ms. There is bug report
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1002697)
indicates that the timeout is too short for ASMedia ASM1042 host controller
to save/restore the state successfully. Increase the timeout to 10ms helps to
resolve the issue.

This patch should be backported to stable kernels as old as 2.6.37, that
contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation"

Signed-off-by: Andiry Xu <andiry.xu@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/xhci.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 1d4958f..a979cd0 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -795,8 +795,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_CSS;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
-		xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
@@ -848,8 +848,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		command |= CMD_CRS;
 		xhci_writel(xhci, command, &xhci->op_regs->command);
 		if (handshake(xhci, &xhci->op_regs->status,
-			      STS_RESTORE, 0, 10*100)) {
-			xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+			      STS_RESTORE, 0, 10 * 1000)) {
+			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
 			spin_unlock_irq(&xhci->lock);
 			return -ETIMEDOUT;
 		}

[ 64/69] usb: PS3 EHCI QH read work-around

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geoff Levand <geoff@infradead.org>

commit aaa0ef289afe9186f81e2340114ea413eef0492a upstream.

PS3 EHCI HC errata fix 244.  The SCC EHCI HC will not correctly perform QH
reads that occur near or span a micro-frame boundry.  This is due to a problem
in the Nak Count Reload Control logic (EHCI Specification 1.0 Section 4.9.1).

The work-around for this problem is for the HC driver to set I=1 (inactive) for
QHs with H=1 (list head).

Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/ehci-hcd.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e0ca995..9496b7d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -670,6 +670,7 @@ static int ehci_init(struct usb_hcd *hcd)
 	hw = ehci->async->hw;
 	hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
 	hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+	hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7));	/* I = 1 */
 	hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
 	hw->hw_qtd_next = EHCI_LIST_END(ehci);
 	ehci->async->qh_state = QH_STATE_LINKED;

[ 65/69] USB: fix PS3 EHCI systems

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ricardo Martins <rasm@fe.up.pt>

commit 4f7a67e2dd49fbfba002c453bc24bf00e701cc71 upstream.

After commit aaa0ef289afe9186f81e2340114ea413eef0492a "PS3 EHCI QH
read work-around", Terratec Grabby (em28xx) stopped working with AMD
Geode LX 800 (USB controller AMD CS5536). Since this is a PS3 only
fix, the following patch adds a conditional block around it.

Signed-off-by: Ricardo Martins <rasm@fe.up.pt>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/host/ehci-hcd.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b100f5f..800be38 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -671,7 +671,9 @@ static int ehci_init(struct usb_hcd *hcd)
 	hw = ehci->async->hw;
 	hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
 	hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
 	hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7));	/* I = 1 */
+#endif
 	hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
 	hw->hw_qtd_next = EHCI_LIST_END(ehci);
 	ehci->async->qh_state = QH_STATE_LINKED;

[ 66/69] usb: cdc-acm: fix devices not unthrottled on open

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Otto Meta <otto.patches@sister-shadow.de>

commit 6c4707f3f8c44ec18282e1c014c80e1c257042f9 upstream.

Currently CDC-ACM devices stay throttled when their TTY is closed while
throttled, stalling further communication attempts after the next open.

Unthrottling during open/activate got lost starting with kernel
3.0.0 and this patch reintroduces it.

Signed-off-by: Otto Meta <otto.patches@sister-shadow.de>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/class/cdc-acm.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -498,6 +498,14 @@
 
 	usb_autopm_put_interface(acm->control);
 
+	/*
+	 * Unthrottle device in case the TTY was closed while throttled.
+	 */
+	spin_lock_irq(&acm->read_lock);
+	acm->throttled = 0;
+	acm->throttle_req = 0;
+	spin_unlock_irq(&acm->read_lock);
+
 	if (acm_submit_read_urbs(acm, GFP_KERNEL))
 		goto bail_out;
 

[ 67/69] USB: fix gathering of interface associations

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mack <zonque@gmail.com>

commit b3a3dd074f7053ef824ad077e5331b52220ceba1 upstream.

TEAC's UD-H01 (and probably other devices) have a gap in the interface
number allocation of their descriptors:

  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          220
    bNumInterfaces          3
    [...]
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      [...]
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          1 Audio
      bFunctionSubClass       0
      bFunctionProtocol      32
      iFunction               4
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      [...]

Once a configuration is selected, usb_set_configuration() walks the
known interfaces of a given configuration and calls find_iad() on
each of them to set the interface association pointer the interface
is included in.

The problem here is that the loop variable is taken for the interface
number in the comparison logic that gathers the association. Which is
fine as long as the descriptors are sane.

In the case above, however, the logic gets out of sync and the
interface association fields of all interfaces beyond the interface
number gap are wrong.

Fix this by passing the interface's bInterfaceNumber to find_iad()
instead.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: bEN <ml_all@circa.be>
Reported-by: Ivan Perrone <ivanperrone@hotmail.com>
Tested-by: ivan perrone <ivanperrone@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/usb/core/message.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b548cf1..bdd1c67 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1838,7 +1838,6 @@ free_interfaces:
 		intfc = cp->intf_cache[i];
 		intf->altsetting = intfc->altsetting;
 		intf->num_altsetting = intfc->num_altsetting;
-		intf->intf_assoc = find_iad(dev, cp, i);
 		kref_get(&intfc->ref);
 
 		alt = usb_altnum_to_altsetting(intf, 0);
@@ -1851,6 +1850,8 @@ free_interfaces:
 		if (!alt)
 			alt = &intf->altsetting[0];
 
+		intf->intf_assoc =
+			find_iad(dev, cp, alt->desc.bInterfaceNumber);
 		intf->cur_altsetting = alt;
 		usb_enable_interface(dev, intf, true);
 		intf->dev.parent = &dev->dev;

[ 68/69] swap: fix shmem swapping when more than 8 areas

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@google.com>

commit 9b15b817f3d62409290fd56fe3cbb076a931bb0a upstream.

Minchan Kim reports that when a system has many swap areas, and tmpfs
swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read
back the page cannot locate it, and the read fails with -ENOMEM.

Whoops.  Yes, I blindly followed read_swap_header()'s pte_to_swp_entry(
swp_entry_to_pte()) technique for determining maximum usable swap
offset, without stopping to realize that that actually depends upon the
pte swap encoding shifting swap offset to the higher bits and truncating
it there.  Whereas our radix_tree swap encoding leaves offset in the
lower bits: it's swap "type" (that is, index of swap area) that was
truncated.

Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the
broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header().

This does not reduce the usable size of a swap area any further, it
leaves it as claimed when making the original commit: no change from 3.0
on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB
per swapfile on i386 with PAE.  It's not a change I would have risked
five years ago, but with x86_64 supported for ten years, I believe it's
appropriate now.

Hmm, and what if some architecture implements its swap pte with offset
encoded below type? That would equally break the maximum usable swap
offset check.  Happily, they all follow the same tradition of encoding
offset above type, but I'll prepare a check on that for next.

Reported-and-Reviewed-and-Tested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 include/linux/swapops.h |    8 +++++---
 mm/swapfile.c           |   12 ++++--------
 2 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/include/linux/swapops.h b/include/linux/swapops.h
index 792d16d..47ead51 100644
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -9,13 +9,15 @@
  * get good packing density in that tree, so the index should be dense in
  * the low-order bits.
  *
- * We arrange the `type' and `offset' fields so that `type' is at the five
+ * We arrange the `type' and `offset' fields so that `type' is at the seven
  * high-order bits of the swp_entry_t and `offset' is right-aligned in the
- * remaining bits.
+ * remaining bits.  Although `type' itself needs only five bits, we allow for
+ * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
  *
  * swp_entry_t's are *never* stored anywhere in their arch-dependent format.
  */
-#define SWP_TYPE_SHIFT(e)	(sizeof(e.val) * 8 - MAX_SWAPFILES_SHIFT)
+#define SWP_TYPE_SHIFT(e)	((sizeof(e.val) * 8) - \
+			(MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
 #define SWP_OFFSET_MASK(e)	((1UL << SWP_TYPE_SHIFT(e)) - 1)
 
 /*
diff --git a/mm/swapfile.c b/mm/swapfile.c
index de5bc51..71373d0 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1916,24 +1916,20 @@ static unsigned long read_swap_header(struct swap_info_struct *p,
 
 	/*
 	 * Find out how many pages are allowed for a single swap
-	 * device. There are three limiting factors: 1) the number
+	 * device. There are two limiting factors: 1) the number
 	 * of bits for the swap offset in the swp_entry_t type, and
 	 * 2) the number of bits in the swap pte as defined by the
-	 * the different architectures, and 3) the number of free bits
-	 * in an exceptional radix_tree entry. In order to find the
+	 * different architectures. In order to find the
 	 * largest possible bit mask, a swap entry with swap type 0
 	 * and swap offset ~0UL is created, encoded to a swap pte,
 	 * decoded to a swp_entry_t again, and finally the swap
 	 * offset is extracted. This will mask all the bits from
 	 * the initial ~0UL mask that can't be encoded in either
 	 * the swp_entry_t or the architecture definition of a
-	 * swap pte.  Then the same is done for a radix_tree entry.
+	 * swap pte.
 	 */
 	maxpages = swp_offset(pte_to_swp_entry(
-			swp_entry_to_pte(swp_entry(0, ~0UL))));
-	maxpages = swp_offset(radix_to_swp_entry(
-			swp_to_radix_entry(swp_entry(0, maxpages)))) + 1;
-
+			swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
 	if (maxpages > swap_header->info.last_page) {
 		maxpages = swap_header->info.last_page + 1;
 		/* p->max is an unsigned int: don't overflow it */

[ 69/69] drm/radeon: add some additional 6xx/7xx/EG register init

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit b866d1334ba2d544bc575d75357dea6bdcdc7f46 upstream.

- SMX_SAR_CTL0 needs to be programmed correctly to prevent
problems with memory exports in certain cases.
- VC_ENHANCE needs to be initialized on 6xx/7xx.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
 drivers/gpu/drm/radeon/evergreen.c  |    3 +++
 drivers/gpu/drm/radeon/evergreend.h |    1 +
 drivers/gpu/drm/radeon/r600.c       |    1 +
 drivers/gpu/drm/radeon/r600d.h      |    1 +
 drivers/gpu/drm/radeon/rv770.c      |    5 ++++-
 drivers/gpu/drm/radeon/rv770d.h     |    3 +++
 6 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 01550d0..7fb3d2e 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1932,6 +1932,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 	smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
 	WREG32(SMX_DC_CTL0, smx_dc_ctl0);
 
+	if (rdev->family <= CHIP_SUMO2)
+		WREG32(SMX_SAR_CTL0, 0x00010000);
+
 	WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
 					POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
 					SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 2773039..b50b15c 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -503,6 +503,7 @@
 #define	SCRATCH_UMSK					0x8540
 #define	SCRATCH_ADDR					0x8544
 
+#define	SMX_SAR_CTL0					0xA008
 #define	SMX_DC_CTL0					0xA020
 #define		USE_HASH_FUNCTION				(1 << 0)
 #define		NUMBER_OF_SETS(x)				((x) << 1)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index f30dc95..bff6272 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1839,6 +1839,7 @@ void r600_gpu_init(struct radeon_device *rdev)
 	WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
 			       NUM_CLIP_SEQ(3)));
 	WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095));
+	WREG32(VC_ENHANCE, 0);
 }
 
 
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index a0dbf1f..c6857e8 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -485,6 +485,7 @@
 #define		TC_L2_SIZE(x)					((x)<<5)
 #define		L2_DISABLE_LATE_HIT				(1<<9)
 
+#define	VC_ENHANCE					0x9714
 
 #define	VGT_CACHE_INVALIDATION				0x88C4
 #define		CACHE_INVALIDATION(x)				((x)<<0)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 4ad0281..b4f51c5 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -616,6 +616,9 @@ static void rv770_gpu_init(struct radeon_device *rdev)
 				       ACK_FLUSH_CTL(3) |
 				       SYNC_FLUSH_CTL));
 
+	if (rdev->family != CHIP_RV770)
+		WREG32(SMX_SAR_CTL0, 0x00003f3f);
+
 	db_debug3 = RREG32(DB_DEBUG3);
 	db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f);
 	switch (rdev->family) {
@@ -792,7 +795,7 @@ static void rv770_gpu_init(struct radeon_device *rdev)
 
 	WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
 					  NUM_CLIP_SEQ(3)));
-
+	WREG32(VC_ENHANCE, 0);
 }
 
 void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h
index fdc0898..b0adfc5 100644
--- a/drivers/gpu/drm/radeon/rv770d.h
+++ b/drivers/gpu/drm/radeon/rv770d.h
@@ -211,6 +211,7 @@
 #define	SCRATCH_UMSK					0x8540
 #define	SCRATCH_ADDR					0x8544
 
+#define	SMX_SAR_CTL0					0xA008
 #define	SMX_DC_CTL0					0xA020
 #define		USE_HASH_FUNCTION				(1 << 0)
 #define		CACHE_DEPTH(x)					((x) << 1)
@@ -310,6 +311,8 @@
 #define	TCP_CNTL					0x9610
 #define	TCP_CHAN_STEER					0x9614
 
+#define	VC_ENHANCE					0x9714
+
 #define	VGT_CACHE_INVALIDATION				0x88C4
 #define		CACHE_INVALIDATION(x)				((x)<<0)
 #define			VC_ONLY						0

Re: [ 00/69] 3.2.21-stable review

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 91269 bytes --]

diff --git a/Makefile b/Makefile
index c7e9cc4..59b96e7 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
-SUBLEVEL = 20
-EXTRAVERSION =
+SUBLEVEL = 21
+EXTRAVERSION = -rc1
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 89493ab..20ed2d5 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -12,6 +12,7 @@
 
 #include <linux/errno.h>
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <mach/common.h>
 
 int platform_cpu_kill(unsigned int cpu)
@@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu)
 	return 1;
 }
 
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-	flush_cache_all();
+	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
 	cpu_do_idle();
+	cpu_leave_lowpower();
 
 	/* We should never return from idle */
 	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 25f8402..ad994b3 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -32,7 +32,7 @@
  * Memory-mapped I/O on MX21ADS base board
  */
 #define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
+#define MX21ADS_MMIO_SIZE        0xc00000
 
 #define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
 		(MX21ADS_MMIO_BASE_ADDR + (offset))
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
index 5e11ba7..5e3f1f0 100644
--- a/arch/arm/mach-mx5/crm_regs.h
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -23,7 +23,7 @@
 #define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
 #define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
 #define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
 
 /* PLL Register Offsets */
 #define MXC_PLL_DP_CTL			0x00
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index 0b6d796..2e3200c 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -176,8 +176,8 @@ int module_frob_arch_sections(Elf32_Ehdr *hdr,
 
 static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
 {
-	if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16)
-	    && entry->jump[1] == 0x396b0000 + (val & 0xffff))
+	if (entry->jump[0] == 0x3d800000 + ((val + 0x8000) >> 16)
+	    && entry->jump[1] == 0x398c0000 + (val & 0xffff))
 		return 1;
 	return 0;
 }
@@ -204,10 +204,9 @@ static uint32_t do_plt_call(void *location,
 		entry++;
 	}
 
-	/* Stolen from Paul Mackerras as well... */
-	entry->jump[0] = 0x3d600000+((val+0x8000)>>16);	/* lis r11,sym@ha */
-	entry->jump[1] = 0x396b0000 + (val&0xffff);	/* addi r11,r11,sym@l*/
-	entry->jump[2] = 0x7d6903a6;			/* mtctr r11 */
+	entry->jump[0] = 0x3d800000+((val+0x8000)>>16); /* lis r12,sym@ha */
+	entry->jump[1] = 0x398c0000 + (val&0xffff);     /* addi r12,r12,sym@l*/
+	entry->jump[2] = 0x7d8903a6;                    /* mtctr r12 */
 	entry->jump[3] = 0x4e800420;			/* bctr */
 
 	DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index be6d9e3..3470624 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -2460,10 +2460,12 @@ ENTRY(aesni_cbc_dec)
 	pxor IN3, STATE4
 	movaps IN4, IV
 #else
-	pxor (INP), STATE2
-	pxor 0x10(INP), STATE3
 	pxor IN1, STATE4
 	movaps IN2, IV
+	movups (INP), IN1
+	pxor IN1, STATE2
+	movups 0x10(INP), IN2
+	pxor IN2, STATE3
 #endif
 	movups STATE1, (OUTP)
 	movups STATE2, 0x10(OUTP)
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 1b82f7e..679229f 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -149,7 +149,6 @@
 /* 4 bits of software ack period */
 #define UV2_ACK_MASK			0x7UL
 #define UV2_ACK_UNITS_SHFT		3
-#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT
 #define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
 
 /*
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 0bab2b1..3524e1f 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -571,6 +571,24 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		}
 	}
 
+	/* re-enable TopologyExtensions if switched off by BIOS */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x10) && (c->x86_model <= 0x1f) &&
+	    !cpu_has(c, X86_FEATURE_TOPOEXT)) {
+		u64 val;
+
+		if (!rdmsrl_amd_safe(0xc0011005, &val)) {
+			val |= 1ULL << 54;
+			wrmsrl_amd_safe(0xc0011005, val);
+			rdmsrl(0xc0011005, val);
+			if (val & (1ULL << 54)) {
+				set_cpu_cap(c, X86_FEATURE_TOPOEXT);
+				printk(KERN_INFO FW_INFO "CPU: Re-enabling "
+				  "disabled Topology Extensions Support\n");
+			}
+		}
+	}
+
 	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index f547421..445a61c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -52,6 +52,7 @@ struct threshold_block {
 	unsigned int		cpu;
 	u32			address;
 	u16			interrupt_enable;
+	bool			interrupt_capable;
 	u16			threshold_limit;
 	struct kobject		kobj;
 	struct list_head	miscj;
@@ -86,6 +87,21 @@ struct thresh_restart {
 	u16			old_limit;
 };
 
+static bool lvt_interrupt_supported(unsigned int bank, u32 msr_high_bits)
+{
+	/*
+	 * bank 4 supports APIC LVT interrupts implicitly since forever.
+	 */
+	if (bank == 4)
+		return true;
+
+	/*
+	 * IntP: interrupt present; if this bit is set, the thresholding
+	 * bank can generate APIC LVT interrupts
+	 */
+	return msr_high_bits & BIT(28);
+}
+
 static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 {
 	int msr = (hi & MASK_LVTOFF_HI) >> 20;
@@ -107,8 +123,10 @@ static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 	return 1;
 };
 
-/* must be called with correct cpu affinity */
-/* Called via smp_call_function_single() */
+/*
+ * Called via smp_call_function_single(), must be called with correct
+ * cpu affinity.
+ */
 static void threshold_restart_bank(void *_tr)
 {
 	struct thresh_restart *tr = _tr;
@@ -131,6 +149,12 @@ static void threshold_restart_bank(void *_tr)
 		    (new_count & THRESHOLD_MAX);
 	}
 
+	/* clear IntType */
+	hi &= ~MASK_INT_TYPE_HI;
+
+	if (!tr->b->interrupt_capable)
+		goto done;
+
 	if (tr->set_lvt_off) {
 		if (lvt_off_valid(tr->b, tr->lvt_off, lo, hi)) {
 			/* set new lvt offset */
@@ -139,9 +163,10 @@ static void threshold_restart_bank(void *_tr)
 		}
 	}
 
-	tr->b->interrupt_enable ?
-	    (hi = (hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) :
-	    (hi &= ~MASK_INT_TYPE_HI);
+	if (tr->b->interrupt_enable)
+		hi |= INT_TYPE_APIC;
+
+ done:
 
 	hi |= MASK_COUNT_EN_HI;
 	wrmsr(tr->b->address, lo, hi);
@@ -206,14 +231,18 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 			if (shared_bank[bank] && c->cpu_core_id)
 				break;
 #endif
-			offset = setup_APIC_mce(offset,
-						(high & MASK_LVTOFF_HI) >> 20);
 
 			memset(&b, 0, sizeof(b));
-			b.cpu		= cpu;
-			b.bank		= bank;
-			b.block		= block;
-			b.address	= address;
+			b.cpu			= cpu;
+			b.bank			= bank;
+			b.block			= block;
+			b.address		= address;
+			b.interrupt_capable	= lvt_interrupt_supported(bank, high);
+
+			if (b.interrupt_capable) {
+				int new = (high & MASK_LVTOFF_HI) >> 20;
+				offset  = setup_APIC_mce(offset, new);
+			}
 
 			mce_threshold_block_init(&b, offset);
 			mce_threshold_vector = amd_threshold_interrupt;
@@ -313,6 +342,9 @@ store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
 	struct thresh_restart tr;
 	unsigned long new;
 
+	if (!b->interrupt_capable)
+		return -EINVAL;
+
 	if (strict_strtoul(buf, 0, &new) < 0)
 		return -EINVAL;
 
@@ -471,6 +503,7 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
 	b->cpu			= cpu;
 	b->address		= address;
 	b->interrupt_enable	= 0;
+	b->interrupt_capable	= lvt_interrupt_supported(bank, high);
 	b->threshold_limit	= THRESHOLD_MAX;
 
 	INIT_LIST_HEAD(&b->miscj);
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 81aee5a..29a69550 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1304,7 +1304,6 @@ static void __init enable_timeouts(void)
 		 */
 		mmr_image |= (1L << SOFTACK_MSHIFT);
 		if (is_uv2_hub()) {
-			mmr_image &= ~(1L << UV2_LEG_SHFT);
 			mmr_image |= (1L << UV2_EXT_SHFT);
 		}
 		write_mmr_misc_control(pnode, mmr_image);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index cca659e..44d4393 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -198,6 +198,9 @@ static void __init xen_banner(void)
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
 static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
 static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
 
@@ -218,6 +221,11 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
 		maskedx = cpuid_leaf1_edx_mask;
 		break;
 
+	case CPUID_THERM_POWER_LEAF:
+		/* Disabling APERFMPERF for kernel usage */
+		maskecx = ~(1 << APERFMPERF_PRESENT);
+		break;
+
 	case 0xb:
 		/* Suppress extended topology stuff */
 		maskebx = 0;
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index b427711..58b49d1 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -897,6 +897,7 @@ static struct pci_device_id agp_intel_pci_table[] = {
 	ID(PCI_DEVICE_ID_INTEL_B43_HB),
 	ID(PCI_DEVICE_ID_INTEL_B43_1_HB),
 	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB),
+	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D2_HB),
 	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB),
 	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB),
 	ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB),
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h
index 5da67f1..6f24604 100644
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@@ -211,6 +211,7 @@
 #define PCI_DEVICE_ID_INTEL_G41_HB          0x2E30
 #define PCI_DEVICE_ID_INTEL_G41_IG          0x2E32
 #define PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB	    0x0040
+#define PCI_DEVICE_ID_INTEL_IRONLAKE_D2_HB	    0x0069
 #define PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG	    0x0042
 #define PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB	    0x0044
 #define PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB	    0x0062
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
index 241df2e..0477982 100644
--- a/drivers/char/hw_random/atmel-rng.c
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -36,6 +36,13 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
 	/* data ready? */
 	if (readl(trng->base + TRNG_ODATA) & 1) {
 		*data = readl(trng->base + TRNG_ODATA);
+		/*
+		  ensure data ready is only set again AFTER the next data
+		  word is ready in case it got set between checking ISR
+		  and reading ODATA, so we don't risk re-reading the
+		  same word
+		*/
+		readl(trng->base + TRNG_ISR);
 		return 4;
 	} else
 		return 0;
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index d0f8830..3a1bfd7 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -214,6 +214,7 @@ static const struct intel_device_info intel_sandybridge_d_info = {
 	.need_gfx_hws = 1, .has_hotplug = 1,
 	.has_bsd_ring = 1,
 	.has_blt_ring = 1,
+	.has_force_wake = 1,
 };
 
 static const struct intel_device_info intel_sandybridge_m_info = {
@@ -222,6 +223,7 @@ static const struct intel_device_info intel_sandybridge_m_info = {
 	.has_fbc = 1,
 	.has_bsd_ring = 1,
 	.has_blt_ring = 1,
+	.has_force_wake = 1,
 };
 
 static const struct intel_device_info intel_ivybridge_d_info = {
@@ -229,6 +231,7 @@ static const struct intel_device_info intel_ivybridge_d_info = {
 	.need_gfx_hws = 1, .has_hotplug = 1,
 	.has_bsd_ring = 1,
 	.has_blt_ring = 1,
+	.has_force_wake = 1,
 };
 
 static const struct intel_device_info intel_ivybridge_m_info = {
@@ -237,6 +240,7 @@ static const struct intel_device_info intel_ivybridge_m_info = {
 	.has_fbc = 0,	/* FBC is not enabled on Ivybridge mobile yet */
 	.has_bsd_ring = 1,
 	.has_blt_ring = 1,
+	.has_force_wake = 1,
 };
 
 static const struct pci_device_id pciidlist[] = {		/* aka */
@@ -939,7 +943,7 @@ MODULE_LICENSE("GPL and additional rights");
 
 /* We give fast paths for the really cool registers */
 #define NEEDS_FORCE_WAKE(dev_priv, reg) \
-	(((dev_priv)->info->gen >= 6) && \
+	((HAS_FORCE_WAKE((dev_priv)->dev)) && \
 	 ((reg) < 0x40000) &&		 \
 	 ((reg) != FORCEWAKE) &&	 \
 	 ((reg) != ECOBUS))
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ae294a0..d62c731 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -244,6 +244,7 @@ struct intel_device_info {
 	u8 is_broadwater:1;
 	u8 is_crestline:1;
 	u8 is_ivybridge:1;
+	u8 has_force_wake:1;
 	u8 has_fbc:1;
 	u8 has_pipe_cxsr:1;
 	u8 has_hotplug:1;
@@ -1001,6 +1002,8 @@ struct drm_i915_file_private {
 #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
 #define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
 
+#define HAS_FORCE_WAKE(dev) (INTEL_INFO(dev)->has_force_wake)
+
 #include "i915_trace.h"
 
 extern struct drm_ioctl_desc i915_ioctls[];
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 06ec1e5..fd53122 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -164,6 +164,14 @@
 #define MI_DISPLAY_FLIP		MI_INSTR(0x14, 2)
 #define MI_DISPLAY_FLIP_I915	MI_INSTR(0x14, 1)
 #define   MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
+/* IVB has funny definitions for which plane to flip. */
+#define   MI_DISPLAY_FLIP_IVB_PLANE_A  (0 << 19)
+#define   MI_DISPLAY_FLIP_IVB_PLANE_B  (1 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
+#define   MI_DISPLAY_FLIP_IVB_PLANE_C  (4 << 19)
+#define   MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
+
 #define MI_SET_CONTEXT		MI_INSTR(0x18, 0)
 #define   MI_MM_SPACE_GTT		(1<<8)
 #define   MI_MM_SPACE_PHYSICAL		(0<<8)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4720397..5c1cdb8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7009,14 +7009,14 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	/* Offset into the new buffer for cases of shared fbs between CRTCs */
 	offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
 
 	ret = BEGIN_LP_RING(6);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	/* Can't queue multiple flips, so wait for the previous
 	 * one to finish before executing the next.
@@ -7033,7 +7033,11 @@ static int intel_gen2_queue_flip(struct drm_device *dev,
 	OUT_RING(obj->gtt_offset + offset);
 	OUT_RING(MI_NOOP);
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
@@ -7050,14 +7054,14 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	/* Offset into the new buffer for cases of shared fbs between CRTCs */
 	offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8;
 
 	ret = BEGIN_LP_RING(6);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	if (intel_crtc->plane)
 		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
@@ -7072,7 +7076,11 @@ static int intel_gen3_queue_flip(struct drm_device *dev,
 	OUT_RING(MI_NOOP);
 
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
@@ -7088,11 +7096,11 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	ret = BEGIN_LP_RING(4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	/* i965+ uses the linear or tiled offsets from the
 	 * Display Registers (which do not change across a page-flip)
@@ -7111,7 +7119,11 @@ static int intel_gen4_queue_flip(struct drm_device *dev,
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	OUT_RING(pf | pipesrc);
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
@@ -7127,11 +7139,11 @@ static int intel_gen6_queue_flip(struct drm_device *dev,
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
 	if (ret)
-		goto out;
+		goto err;
 
 	ret = BEGIN_LP_RING(4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
 	OUT_RING(MI_DISPLAY_FLIP |
 		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
@@ -7142,7 +7154,11 @@ static int intel_gen6_queue_flip(struct drm_device *dev,
 	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
 	OUT_RING(pf | pipesrc);
 	ADVANCE_LP_RING();
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
@@ -7160,22 +7176,43 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
+	uint32_t plane_bit = 0;
 	int ret;
 
 	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
 	if (ret)
-		goto out;
+		goto err;
+
+	switch(intel_crtc->plane) {
+	case PLANE_A:
+		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
+		break;
+	case PLANE_B:
+		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
+		break;
+	case PLANE_C:
+		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
+		break;
+	default:
+		WARN_ONCE(1, "unknown plane in flip command\n");
+		ret = -ENODEV;
+		goto err;
+	}
 
 	ret = intel_ring_begin(ring, 4);
 	if (ret)
-		goto out;
+		goto err_unpin;
 
-	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
+	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
 	intel_ring_emit(ring, (fb->pitch | obj->tiling_mode));
 	intel_ring_emit(ring, (obj->gtt_offset));
 	intel_ring_emit(ring, (MI_NOOP));
 	intel_ring_advance(ring);
-out:
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err:
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 62f9ac5..933e66b 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -263,10 +263,15 @@ u32 intel_ring_get_active_head(struct intel_ring_buffer *ring)
 
 static int init_ring_common(struct intel_ring_buffer *ring)
 {
-	drm_i915_private_t *dev_priv = ring->dev->dev_private;
+	struct drm_device *dev = ring->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj = ring->obj;
+	int ret = 0;
 	u32 head;
 
+	if (HAS_FORCE_WAKE(dev))
+		gen6_gt_force_wake_get(dev_priv);
+
 	/* Stop the ring if it's running. */
 	I915_WRITE_CTL(ring, 0);
 	I915_WRITE_HEAD(ring, 0);
@@ -314,7 +319,8 @@ static int init_ring_common(struct intel_ring_buffer *ring)
 				I915_READ_HEAD(ring),
 				I915_READ_TAIL(ring),
 				I915_READ_START(ring));
-		return -EIO;
+		ret = -EIO;
+		goto out;
 	}
 
 	if (!drm_core_check_feature(ring->dev, DRIVER_MODESET))
@@ -325,7 +331,11 @@ static int init_ring_common(struct intel_ring_buffer *ring)
 		ring->space = ring_space(ring);
 	}
 
-	return 0;
+out:
+	if (HAS_FORCE_WAKE(dev))
+		gen6_gt_force_wake_put(dev_priv);
+
+	return ret;
 }
 
 static int
@@ -1045,6 +1055,10 @@ int intel_init_ring_buffer(struct drm_device *dev,
 	if (ret)
 		goto err_unref;
 
+	ret = i915_gem_object_set_to_gtt_domain(obj, true);
+	if (ret)
+		goto err_unpin;
+
 	ring->map.size = ring->size;
 	ring->map.offset = dev->agp->base + obj->gtt_offset;
 	ring->map.type = 0;
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index cea6696..1e72db5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -602,6 +602,55 @@ nouveau_connector_scaler_modes_add(struct drm_connector *connector)
 	return modes;
 }
 
+static void
+nouveau_connector_detect_depth(struct drm_connector *connector)
+{
+	struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
+	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
+	struct nvbios *bios = &dev_priv->vbios;
+	struct drm_display_mode *mode = nv_connector->native_mode;
+	bool duallink;
+
+	/* if the edid is feeling nice enough to provide this info, use it */
+	if (nv_connector->edid && connector->display_info.bpc)
+		return;
+
+	/* EDID 1.4 is *supposed* to be supported on eDP, but, Apple... */
+	if (nv_connector->dcb->type == DCB_CONNECTOR_eDP) {
+		connector->display_info.bpc = 6;
+		return;
+	}
+
+	/* we're out of options unless we're LVDS, default to 8bpc */
+	if (nv_encoder->dcb->type != OUTPUT_LVDS) {
+		connector->display_info.bpc = 8;
+		return;
+	}
+
+	connector->display_info.bpc = 6;
+
+	/* LVDS: panel straps */
+	if (bios->fp_no_ddc) {
+		if (bios->fp.if_is_24bit)
+			connector->display_info.bpc = 8;
+		return;
+	}
+
+	/* LVDS: DDC panel, need to first determine the number of links to
+	 * know which if_is_24bit flag to check...
+	 */
+	if (nv_connector->edid &&
+	    nv_connector->dcb->type == DCB_CONNECTOR_LVDS_SPWG)
+		duallink = ((u8 *)nv_connector->edid)[121] == 2;
+	else
+		duallink = mode->clock >= bios->fp.duallink_transition_clk;
+
+	if ((!duallink && (bios->fp.strapless_is_24bit & 1)) ||
+	    ( duallink && (bios->fp.strapless_is_24bit & 2)))
+		connector->display_info.bpc = 8;
+}
+
 static int
 nouveau_connector_get_modes(struct drm_connector *connector)
 {
@@ -646,6 +695,12 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 		ret = 1;
 	}
 
+	/* Attempt to determine display colour depth, this has to happen after
+	 * we've determined the "native" mode for LVDS, as the VBIOS tables
+	 * require us to compare against a pixel clock in some cases..
+	 */
+	nouveau_connector_detect_depth(connector);
+
 	if (nv_encoder->dcb->type == OUTPUT_TV)
 		ret = get_slave_funcs(encoder)->get_modes(encoder, connector);
 
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index dac178b..931f4df 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -2148,6 +2148,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 	smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
 	WREG32(SMX_DC_CTL0, smx_dc_ctl0);
 
+	if (rdev->family <= CHIP_SUMO2)
+		WREG32(SMX_SAR_CTL0, 0x00010000);
+
 	WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
 					POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
 					SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 0128445..6ecd23f 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -270,6 +270,7 @@
 #define	SCRATCH_UMSK					0x8540
 #define	SCRATCH_ADDR					0x8544
 
+#define	SMX_SAR_CTL0					0xA008
 #define	SMX_DC_CTL0					0xA020
 #define		USE_HASH_FUNCTION				(1 << 0)
 #define		NUMBER_OF_SETS(x)				((x) << 1)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 9cdda0b..bdfa82a 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -1905,6 +1905,7 @@ void r600_gpu_init(struct radeon_device *rdev)
 	WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
 			       NUM_CLIP_SEQ(3)));
 	WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095));
+	WREG32(VC_ENHANCE, 0);
 }
 
 
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index bfe1b5d..d4d23a8d 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -461,6 +461,7 @@
 #define		TC_L2_SIZE(x)					((x)<<5)
 #define		L2_DISABLE_LATE_HIT				(1<<9)
 
+#define	VC_ENHANCE					0x9714
 
 #define	VGT_CACHE_INVALIDATION				0x88C4
 #define		CACHE_INVALIDATION(x)				((x)<<0)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index e36ba7f..cc79449 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -782,6 +782,9 @@ static void rv770_gpu_init(struct radeon_device *rdev)
 				       ACK_FLUSH_CTL(3) |
 				       SYNC_FLUSH_CTL));
 
+	if (rdev->family != CHIP_RV770)
+		WREG32(SMX_SAR_CTL0, 0x00003f3f);
+
 	db_debug3 = RREG32(DB_DEBUG3);
 	db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f);
 	switch (rdev->family) {
@@ -960,7 +963,7 @@ static void rv770_gpu_init(struct radeon_device *rdev)
 
 	WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
 					  NUM_CLIP_SEQ(3)));
-
+	WREG32(VC_ENHANCE, 0);
 }
 
 void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h
index 7538092..7095a71 100644
--- a/drivers/gpu/drm/radeon/rv770d.h
+++ b/drivers/gpu/drm/radeon/rv770d.h
@@ -208,6 +208,7 @@
 #define	SCRATCH_UMSK					0x8540
 #define	SCRATCH_ADDR					0x8544
 
+#define	SMX_SAR_CTL0					0xA008
 #define	SMX_DC_CTL0					0xA020
 #define		USE_HASH_FUNCTION				(1 << 0)
 #define		CACHE_DEPTH(x)					((x) << 1)
@@ -307,6 +308,8 @@
 #define	TCP_CNTL					0x9610
 #define	TCP_CHAN_STEER					0x9614
 
+#define	VC_ENHANCE					0x9714
+
 #define	VGT_CACHE_INVALIDATION				0x88C4
 #define		CACHE_INVALIDATION(x)				((x)<<0)
 #define			VC_ONLY						0
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 9a4c3ab..e8e18ca 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -61,14 +61,14 @@ static ssize_t show_power(struct device *dev,
 				  REG_TDP_RUNNING_AVERAGE, &val);
 	running_avg_capture = (val >> 4) & 0x3fffff;
 	running_avg_capture = sign_extend32(running_avg_capture, 21);
-	running_avg_range = val & 0xf;
+	running_avg_range = (val & 0xf) + 1;
 
 	pci_bus_read_config_dword(f4->bus, PCI_DEVFN(PCI_SLOT(f4->devfn), 5),
 				  REG_TDP_LIMIT3, &val);
 
 	tdp_limit = val >> 16;
-	curr_pwr_watts = tdp_limit + data->base_tdp -
-		(s32)(running_avg_capture >> (running_avg_range + 1));
+	curr_pwr_watts = (tdp_limit + data->base_tdp) << running_avg_range;
+	curr_pwr_watts -= running_avg_capture;
 	curr_pwr_watts *= data->tdp_to_watts;
 
 	/*
@@ -78,7 +78,7 @@ static ssize_t show_power(struct device *dev,
 	 * scaling factor 1/(2^16).  For conversion we use
 	 * (10^6)/(2^16) = 15625/(2^10)
 	 */
-	curr_pwr_watts = (curr_pwr_watts * 15625) >> 10;
+	curr_pwr_watts = (curr_pwr_watts * 15625) >> (10 + running_avg_range);
 	return sprintf(buf, "%u\n", (unsigned int) curr_pwr_watts);
 }
 static DEVICE_ATTR(power1_input, S_IRUGO, show_power, NULL);
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 536bda0..8dc84d6 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -686,7 +686,7 @@ static int c_can_get_berr_counter(const struct net_device *dev,
  *
  * We iterate from priv->tx_echo to priv->tx_next and check if the
  * packet has been transmitted, echo it back to the CAN framework.
- * If we discover a not yet transmitted package, stop looking for more.
+ * If we discover a not yet transmitted packet, stop looking for more.
  */
 static void c_can_do_tx(struct net_device *dev)
 {
@@ -698,7 +698,7 @@ static void c_can_do_tx(struct net_device *dev)
 	for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
 		msg_obj_no = get_tx_echo_msg_obj(priv);
 		val = c_can_read_reg32(priv, &priv->regs->txrqst1);
-		if (!(val & (1 << msg_obj_no))) {
+		if (!(val & (1 << (msg_obj_no - 1)))) {
 			can_get_echo_skb(dev,
 					msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
 			stats->tx_bytes += priv->read_reg(priv,
@@ -706,6 +706,8 @@ static void c_can_do_tx(struct net_device *dev)
 					& IF_MCONT_DLC_MASK;
 			stats->tx_packets++;
 			c_can_inval_msg_object(dev, 0, msg_obj_no);
+		} else {
+			break;
 		}
 	}
 
@@ -950,7 +952,7 @@ static int c_can_poll(struct napi_struct *napi, int quota)
 	struct net_device *dev = napi->dev;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+	irqstatus = priv->irqstatus;
 	if (!irqstatus)
 		goto end;
 
@@ -1028,12 +1030,11 @@ end:
 
 static irqreturn_t c_can_isr(int irq, void *dev_id)
 {
-	u16 irqstatus;
 	struct net_device *dev = (struct net_device *)dev_id;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
-	if (!irqstatus)
+	priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+	if (!priv->irqstatus)
 		return IRQ_NONE;
 
 	/* disable all interrupts and schedule the NAPI */
@@ -1063,10 +1064,11 @@ static int c_can_open(struct net_device *dev)
 		goto exit_irq_fail;
 	}
 
+	napi_enable(&priv->napi);
+
 	/* start the c_can controller */
 	c_can_start(dev);
 
-	napi_enable(&priv->napi);
 	netif_start_queue(dev);
 
 	return 0;
diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 9b7fbef..5f32d34 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -76,6 +76,7 @@ struct c_can_priv {
 	unsigned int tx_next;
 	unsigned int tx_echo;
 	void *priv;		/* for board-specific data */
+	u16 irqstatus;
 };
 
 struct net_device *alloc_c_can_dev(void);
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index ed1b432..864448b 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -943,7 +943,7 @@ struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 }
 
 static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 };
-static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
+static const struct sierra_net_info_data sierra_net_info_data_direct_ip = {
 	.rx_urb_size = 8 * 1024,
 	.whitelist = {
 		.infolen = ARRAY_SIZE(sierra_net_ifnum_list),
@@ -951,7 +951,7 @@ static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
 	}
 };
 
-static const struct driver_info sierra_net_info_68A3 = {
+static const struct driver_info sierra_net_info_direct_ip = {
 	.description = "Sierra Wireless USB-to-WWAN Modem",
 	.flags = FLAG_WWAN | FLAG_SEND_ZLP,
 	.bind = sierra_net_bind,
@@ -959,12 +959,18 @@ static const struct driver_info sierra_net_info_68A3 = {
 	.status = sierra_net_status,
 	.rx_fixup = sierra_net_rx_fixup,
 	.tx_fixup = sierra_net_tx_fixup,
-	.data = (unsigned long)&sierra_net_info_data_68A3,
+	.data = (unsigned long)&sierra_net_info_data_direct_ip,
 };
 
 static const struct usb_device_id products[] = {
 	{USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
-	.driver_info = (unsigned long) &sierra_net_info_68A3},
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
+	{USB_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */
+	.driver_info = (unsigned long) &sierra_net_info_direct_ip},
 
 	{}, /* last item */
 };
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 0b9f797..9b6b010 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -49,17 +49,20 @@
 #define IWL6000_UCODE_API_MAX 6
 #define IWL6050_UCODE_API_MAX 5
 #define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
 
 /* Oldest version we won't warn about */
 #define IWL6000_UCODE_API_OK 4
 #define IWL6000G2_UCODE_API_OK 5
 #define IWL6050_UCODE_API_OK 5
 #define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
 
 /* Lowest firmware API version supported */
 #define IWL6000_UCODE_API_MIN 4
 #define IWL6050_UCODE_API_MIN 4
-#define IWL6000G2_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
 
 #define IWL6000_FW_PRE "iwlwifi-6000-"
 #define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode"
@@ -436,9 +439,24 @@ struct iwl_cfg iwl6030_2bg_cfg = {
 	IWL_DEVICE_6030,
 };
 
+#define IWL_DEVICE_6035						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6035_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6035_UCODE_API_OK,			\
+	.ucode_api_min = IWL6035_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.lib = &iwl6030_lib,					\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.need_dc_calib = true,					\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true
+
 struct iwl_cfg iwl6035_2agn_cfg = {
 	.name = "6035 Series 2x2 AGN/BT",
-	IWL_DEVICE_6030,
+	IWL_DEVICE_6035,
 	.ht_params = &iwl6000_ht_params,
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
index 5cfb3d1..ccf1524 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
@@ -1245,7 +1245,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
 		key_flags |= STA_KEY_MULTICAST_MSK;
 
 	sta_cmd.key.key_flags = key_flags;
-	sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
+	sta_cmd.key.key_offset = keyconf->hw_key_idx;
 	sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index d7d2512..16cdd12 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1696,6 +1696,7 @@ static int iwlagn_mac_setup_register(struct iwl_priv *priv,
 			    WIPHY_FLAG_DISABLE_BEACON_HINTS |
 			    WIPHY_FLAG_IBSS_RSN;
 
+#ifdef CONFIG_PM_SLEEP
 	if (priv->ucode_wowlan.code.len && device_can_wakeup(bus(priv)->dev)) {
 		hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
 					  WIPHY_WOWLAN_DISCONNECT |
@@ -1712,6 +1713,7 @@ static int iwlagn_mac_setup_register(struct iwl_priv *priv,
 		hw->wiphy->wowlan.pattern_max_len =
 					IWLAGN_WOWLAN_MAX_PATTERN_LEN;
 	}
+#endif
 
 	if (iwlagn_mod_params.power_save)
 		hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
@@ -1739,6 +1741,7 @@ static int iwlagn_mac_setup_register(struct iwl_priv *priv,
 	ret = ieee80211_register_hw(priv->hw);
 	if (ret) {
 		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+		iwl_leds_exit(priv);
 		return ret;
 	}
 	priv->mac80211_registered = 1;
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index d9b089e..0683006 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -228,6 +228,7 @@
 #define SCD_TXFACT		(SCD_BASE + 0x10)
 #define SCD_ACTIVE		(SCD_BASE + 0x14)
 #define SCD_QUEUECHAIN_SEL	(SCD_BASE + 0xe8)
+#define SCD_CHAINEXT_EN		(SCD_BASE + 0x244)
 #define SCD_AGGR_SEL		(SCD_BASE + 0x248)
 #define SCD_INTERRUPT_MASK	(SCD_BASE + 0x108)
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index 5f17ab8..2f201cf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -868,6 +868,11 @@ static void iwl_trans_pcie_tx_start(struct iwl_trans *trans)
 	iwl_write_prph(bus(trans), SCD_DRAM_BASE_ADDR,
 		       trans_pcie->scd_bc_tbls.dma >> 10);
 
+	/* The chain extension of the SCD doesn't work well. This feature is
+	 * enabled by default by the HW, so we need to disable it manually.
+	 */
+	iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
+
 	/* Enable DMA channel */
 	for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
 		iwl_write_direct32(bus(trans), FH_TCSR_CHNL_TX_CONFIG_REG(chan),
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 99ff12d..c778164 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -390,8 +390,7 @@ struct rt2x00_intf {
 	 * for hardware which doesn't support hardware
 	 * sequence counting.
 	 */
-	spinlock_t seqlock;
-	u16 seqno;
+	atomic_t seqno;
 };
 
 static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 373dae1..921da9a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -277,7 +277,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	else
 		rt2x00dev->intf_sta_count++;
 
-	spin_lock_init(&intf->seqlock);
 	mutex_init(&intf->beacon_skb_mutex);
 	intf->beacon = entry;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 9b1b2b7..50f92d5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -207,6 +207,7 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev,
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
+	u16 seqno;
 
 	if (!(tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ))
 		return;
@@ -227,15 +228,13 @@ static void rt2x00queue_create_tx_descriptor_seq(struct rt2x00_dev *rt2x00dev,
 	 * sequence counting per-frame, since those will override the
 	 * sequence counter given by mac80211.
 	 */
-	spin_lock(&intf->seqlock);
-
 	if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
-		intf->seqno += 0x10;
-	hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-	hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
-
-	spin_unlock(&intf->seqlock);
+		seqno = atomic_add_return(0x10, &intf->seqno);
+	else
+		seqno = atomic_read(&intf->seqno);
 
+	hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+	hdr->seq_ctrl |= cpu_to_le16(seqno);
 }
 
 static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 6d4a531..e5b75eb 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1689,6 +1689,11 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
+	/* Some devices mustn't be in D3 during system sleep */
+	if (target_state == PCI_D3hot &&
+			(dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
+		return 0;
+
 	pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
 
 	error = pci_set_power_state(dev, target_state);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 78fda9c..3c56fec 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2940,6 +2940,32 @@ static void __devinit disable_igfx_irq(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
 
+/*
+ * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
+ * ASUS motherboards will cause memory corruption or a system crash
+ * if they are in D3 while the system is put into S3 sleep.
+ */
+static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
+{
+	const char *sys_info;
+	static const char good_Asus_board[] = "P8Z68-V";
+
+	if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
+		return;
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
+		return;
+	sys_info = dmi_get_system_info(DMI_BOARD_NAME);
+	if (sys_info && memcmp(sys_info, good_Asus_board,
+			sizeof(good_Asus_board) - 1) == 0)
+		return;
+
+	dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
+	dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
+	device_set_wakeup_capable(&dev->dev, false);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
+
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
 {
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index ac336e1..e903077 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1739,7 +1739,7 @@ static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
 static inline u8
 _base_get_msix_index(struct MPT2SAS_ADAPTER *ioc)
 {
-	return ioc->cpu_msix_table[smp_processor_id()];
+	return ioc->cpu_msix_table[raw_smp_processor_id()];
 }
 
 /**
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 5b05744..0364ca2 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -352,9 +352,11 @@ int target_emulate_set_target_port_groups(struct se_task *task)
 
 out:
 	transport_kunmap_data_sg(cmd);
-	task->task_scsi_status = GOOD;
-	transport_complete_task(task, 1);
-	return 0;
+	if (!rc) {
+		task->task_scsi_status = GOOD;
+		transport_complete_task(task, 1);
+	}
+	return rc;
 }
 
 static inline int core_alua_state_nonoptimized(
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e61d9c4..1094469 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -498,6 +498,14 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 
 	usb_autopm_put_interface(acm->control);
 
+	/*
+	 * Unthrottle device in case the TTY was closed while throttled.
+	 */
+	spin_lock_irq(&acm->read_lock);
+	acm->throttled = 0;
+	acm->throttle_req = 0;
+	spin_unlock_irq(&acm->read_lock);
+
 	if (acm_submit_read_urbs(acm, GFP_KERNEL))
 		goto bail_out;
 
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 554ac90..1bc00a2 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -31,6 +31,8 @@
 #define DRIVER_AUTHOR "Oliver Neukum"
 #define DRIVER_DESC "USB Abstract Control Model driver for USB WCM Device Management"
 
+#define HUAWEI_VENDOR_ID	0x12D1
+
 static const struct usb_device_id wdm_ids[] = {
 	{
 		.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
@@ -38,6 +40,29 @@ static const struct usb_device_id wdm_ids[] = {
 		.bInterfaceClass = USB_CLASS_COMM,
 		.bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
 	},
+	{
+		/* 
+		 * Huawei E392, E398 and possibly other Qualcomm based modems
+		 * embed the Qualcomm QMI protocol inside CDC on CDC ECM like
+		 * control interfaces.  Userspace access to this is required
+		 * to configure the accompanying data interface
+		 */
+		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+					USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = HUAWEI_VENDOR_ID,
+		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+		.bInterfaceSubClass = 1,
+		.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
+	},
+	{
+		 /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
+				      USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor           = HUAWEI_VENDOR_ID,
+		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+		.bInterfaceSubClass = 1,
+		.bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
+	},
 	{ }
 };
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 5f1404a..61d08dd 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -495,15 +495,6 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
 	pci_save_state(pci_dev);
 
-	/*
-	 * Some systems crash if an EHCI controller is in D3 during
-	 * a sleep transition.  We have to leave such controllers in D0.
-	 */
-	if (hcd->broken_pci_sleep) {
-		dev_dbg(dev, "Staying in PCI D0\n");
-		return retval;
-	}
-
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index ca717da..ef116a5 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1803,7 +1803,6 @@ free_interfaces:
 		intfc = cp->intf_cache[i];
 		intf->altsetting = intfc->altsetting;
 		intf->num_altsetting = intfc->num_altsetting;
-		intf->intf_assoc = find_iad(dev, cp, i);
 		kref_get(&intfc->ref);
 
 		alt = usb_altnum_to_altsetting(intf, 0);
@@ -1816,6 +1815,8 @@ free_interfaces:
 		if (!alt)
 			alt = &intf->altsetting[0];
 
+		intf->intf_assoc =
+			find_iad(dev, cp, alt->desc.bInterfaceNumber);
 		intf->cur_altsetting = alt;
 		usb_enable_interface(dev, intf, true);
 		intf->dev.parent = &dev->dev;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index da2f711..339be10 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -620,6 +620,9 @@ static int ehci_init(struct usb_hcd *hcd)
 	hw = ehci->async->hw;
 	hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
 	hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
+#if defined(CONFIG_PPC_PS3)
+	hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7));	/* I = 1 */
+#endif
 	hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
 	hw->hw_qtd_next = EHCI_LIST_END(ehci);
 	ehci->async->qh_state = QH_STATE_LINKED;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index ee85e81..a79e64b 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
-		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
-			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
-			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
-				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
-				hcd->broken_pci_sleep = 1;
-				device_set_wakeup_capable(&pdev->dev, false);
-			}
-		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 4232e868..a40ab98 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -693,10 +693,9 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci,
 		struct xhci_virt_device *virt_dev,
 		int slot_id)
 {
-	struct list_head *tt;
 	struct list_head *tt_list_head;
-	struct list_head *tt_next;
-	struct xhci_tt_bw_info *tt_info;
+	struct xhci_tt_bw_info *tt_info, *next;
+	bool slot_found = false;
 
 	/* If the device never made it past the Set Address stage,
 	 * it may not have the real_port set correctly.
@@ -708,34 +707,16 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci,
 	}
 
 	tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts);
-	if (list_empty(tt_list_head))
-		return;
-
-	list_for_each(tt, tt_list_head) {
-		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
-		if (tt_info->slot_id == slot_id)
+	list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) {
+		/* Multi-TT hubs will have more than one entry */
+		if (tt_info->slot_id == slot_id) {
+			slot_found = true;
+			list_del(&tt_info->tt_list);
+			kfree(tt_info);
+		} else if (slot_found) {
 			break;
+		}
 	}
-	/* Cautionary measure in case the hub was disconnected before we
-	 * stored the TT information.
-	 */
-	if (tt_info->slot_id != slot_id)
-		return;
-
-	tt_next = tt->next;
-	tt_info = list_entry(tt, struct xhci_tt_bw_info,
-			tt_list);
-	/* Multi-TT hubs will have more than one entry */
-	do {
-		list_del(tt);
-		kfree(tt_info);
-		tt = tt_next;
-		if (list_empty(tt_list_head))
-			break;
-		tt_next = tt->next;
-		tt_info = list_entry(tt, struct xhci_tt_bw_info,
-				tt_list);
-	} while (tt_info->slot_id == slot_id);
 }
 
 int xhci_alloc_tt_info(struct xhci_hcd *xhci,
@@ -1699,17 +1680,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	struct dev_info	*dev_info, *next;
-	struct list_head *tt_list_head;
-	struct list_head *tt;
-	struct list_head *endpoints;
-	struct list_head *ep, *q;
-	struct xhci_tt_bw_info *tt_info;
-	struct xhci_interval_bw_table *bwt;
-	struct xhci_virt_ep *virt_ep;
-
 	unsigned long	flags;
 	int size;
-	int i;
+	int i, j, num_ports;
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
@@ -1766,21 +1739,22 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
-	bwt = &xhci->rh_bw->bw_table;
-	for (i = 0; i < XHCI_MAX_INTERVAL; i++) {
-		endpoints = &bwt->interval_bw[i].endpoints;
-		list_for_each_safe(ep, q, endpoints) {
-			virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list);
-			list_del(&virt_ep->bw_endpoint_list);
-			kfree(virt_ep);
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
+		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
+			struct list_head *ep = &bwt->interval_bw[j].endpoints;
+			while (!list_empty(ep))
+				list_del_init(ep->next);
 		}
 	}
 
-	tt_list_head = &xhci->rh_bw->tts;
-	list_for_each_safe(tt, q, tt_list_head) {
-		tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list);
-		list_del(tt);
-		kfree(tt_info);
+	for (i = 0; i < num_ports; i++) {
+		struct xhci_tt_bw_info *tt, *n;
+		list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) {
+			list_del(&tt->tt_list);
+			kfree(tt);
+		}
 	}
 
 	xhci->num_usb2_ports = 0;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 4c00606..05f82e9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -783,8 +783,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_CSS;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
-	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) {
-		xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n");
+	if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) {
+		xhci_warn(xhci, "WARN: xHC save state timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
@@ -836,8 +836,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		command |= CMD_CRS;
 		xhci_writel(xhci, command, &xhci->op_regs->command);
 		if (handshake(xhci, &xhci->op_regs->status,
-			      STS_RESTORE, 0, 10*100)) {
-			xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n");
+			      STS_RESTORE, 0, 10 * 1000)) {
+			xhci_warn(xhci, "WARN: xHC restore state timeout\n");
 			spin_unlock_irq(&xhci->lock);
 			return -ETIMEDOUT;
 		}
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index c860597..9c8845a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1234,6 +1234,7 @@ static int musb_gadget_disable(struct usb_ep *ep)
 	}
 
 	musb_ep->desc = NULL;
+	musb_ep->end_point.desc = NULL;
 
 	/* abort all pending DMA and requests */
 	nuke(musb_ep, -ESHUTDOWN);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index f2c57e0..aa0c43f 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -82,6 +82,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
 	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+	{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 450bdfe..4045e39 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -737,6 +737,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 219b199..d27d7d7 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -784,6 +784,7 @@
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
 #define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
+#define RTSYSTEMS_RTS01_PID		0x9e57	/* USB-RTS01 Radio Cable */
 
 
 /*
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index ba0d287..42de17b 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -359,13 +359,16 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
 			MCT_U232_SET_REQUEST_TYPE,
 			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
 			WDR_TIMEOUT);
-	if (rc < 0)
-		dev_err(&serial->dev->dev,
-			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+	kfree(buf);
+
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
-	kfree(buf);
-	return rc;
+	if (rc < 0) {
+		dev_err(&serial->dev->dev,
+			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
+		return rc;
+	}
+	return 0;
 } /* mct_u232_set_modem_ctrl */
 
 static int mct_u232_get_modem_stat(struct usb_serial *serial,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index cbe3451..ce02457 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -47,6 +47,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
+static void option_release(struct usb_serial *serial);
 static int option_send_setup(struct usb_serial_port *port);
 static void option_instat_callback(struct urb *urb);
 
@@ -150,6 +151,7 @@ static void option_instat_callback(struct urb *urb);
 #define HUAWEI_PRODUCT_E14AC			0x14AC
 #define HUAWEI_PRODUCT_K3806			0x14AE
 #define HUAWEI_PRODUCT_K4605			0x14C6
+#define HUAWEI_PRODUCT_K5005			0x14C8
 #define HUAWEI_PRODUCT_K3770			0x14C9
 #define HUAWEI_PRODUCT_K3771			0x14CA
 #define HUAWEI_PRODUCT_K4510			0x14CB
@@ -425,7 +427,7 @@ static void option_instat_callback(struct urb *urb);
 #define SAMSUNG_VENDOR_ID                       0x04e8
 #define SAMSUNG_PRODUCT_GT_B3730                0x6889
 
-/* YUGA products  www.yuga-info.com*/
+/* YUGA products  www.yuga-info.com gavin.kx@qq.com */
 #define YUGA_VENDOR_ID				0x257A
 #define YUGA_PRODUCT_CEM600			0x1601
 #define YUGA_PRODUCT_CEM610			0x1602
@@ -442,6 +444,8 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CEU516			0x160C
 #define YUGA_PRODUCT_CEU528			0x160D
 #define YUGA_PRODUCT_CEU526			0x160F
+#define YUGA_PRODUCT_CEU881			0x161F
+#define YUGA_PRODUCT_CEU882			0x162F
 
 #define YUGA_PRODUCT_CWM600			0x2601
 #define YUGA_PRODUCT_CWM610			0x2602
@@ -457,23 +461,26 @@ static void option_instat_callback(struct urb *urb);
 #define YUGA_PRODUCT_CWU518			0x260B
 #define YUGA_PRODUCT_CWU516			0x260C
 #define YUGA_PRODUCT_CWU528			0x260D
+#define YUGA_PRODUCT_CWU581			0x260E
 #define YUGA_PRODUCT_CWU526			0x260F
-
-#define YUGA_PRODUCT_CLM600			0x2601
-#define YUGA_PRODUCT_CLM610			0x2602
-#define YUGA_PRODUCT_CLM500			0x2603
-#define YUGA_PRODUCT_CLM510			0x2604
-#define YUGA_PRODUCT_CLM800			0x2605
-#define YUGA_PRODUCT_CLM900			0x2606
-
-#define YUGA_PRODUCT_CLU718			0x2607
-#define YUGA_PRODUCT_CLU716			0x2608
-#define YUGA_PRODUCT_CLU728			0x2609
-#define YUGA_PRODUCT_CLU726			0x260A
-#define YUGA_PRODUCT_CLU518			0x260B
-#define YUGA_PRODUCT_CLU516			0x260C
-#define YUGA_PRODUCT_CLU528			0x260D
-#define YUGA_PRODUCT_CLU526			0x260F
+#define YUGA_PRODUCT_CWU582			0x261F
+#define YUGA_PRODUCT_CWU583			0x262F
+
+#define YUGA_PRODUCT_CLM600			0x3601
+#define YUGA_PRODUCT_CLM610			0x3602
+#define YUGA_PRODUCT_CLM500			0x3603
+#define YUGA_PRODUCT_CLM510			0x3604
+#define YUGA_PRODUCT_CLM800			0x3605
+#define YUGA_PRODUCT_CLM900			0x3606
+
+#define YUGA_PRODUCT_CLU718			0x3607
+#define YUGA_PRODUCT_CLU716			0x3608
+#define YUGA_PRODUCT_CLU728			0x3609
+#define YUGA_PRODUCT_CLU726			0x360A
+#define YUGA_PRODUCT_CLU518			0x360B
+#define YUGA_PRODUCT_CLU516			0x360C
+#define YUGA_PRODUCT_CLU528			0x360D
+#define YUGA_PRODUCT_CLU526			0x360F
 
 /* Viettel products */
 #define VIETTEL_VENDOR_ID			0x2262
@@ -666,6 +673,11 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3806, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x31) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x32) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K5005, 0xff, 0x01, 0x33) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x31) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3770, 0xff, 0x02, 0x32) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3771, 0xff, 0x02, 0x31) },
@@ -1207,6 +1219,11 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
 	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) },
+	{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */
@@ -1257,7 +1274,7 @@ static struct usb_serial_driver option_1port_device = {
 	.ioctl             = usb_wwan_ioctl,
 	.attach            = usb_wwan_startup,
 	.disconnect        = usb_wwan_disconnect,
-	.release           = usb_wwan_release,
+	.release           = option_release,
 	.read_int_callback = option_instat_callback,
 #ifdef CONFIG_PM
 	.suspend           = usb_wwan_suspend,
@@ -1267,35 +1284,6 @@ static struct usb_serial_driver option_1port_device = {
 
 static int debug;
 
-/* per port private data */
-
-#define N_IN_URB 4
-#define N_OUT_URB 4
-#define IN_BUFLEN 4096
-#define OUT_BUFLEN 4096
-
-struct option_port_private {
-	/* Input endpoints and buffer for this port */
-	struct urb *in_urbs[N_IN_URB];
-	u8 *in_buffer[N_IN_URB];
-	/* Output endpoints and buffer for this port */
-	struct urb *out_urbs[N_OUT_URB];
-	u8 *out_buffer[N_OUT_URB];
-	unsigned long out_busy;		/* Bit vector of URBs in use */
-	int opened;
-	struct usb_anchor delayed;
-
-	/* Settings for the port */
-	int rts_state;	/* Handshaking pins (outputs) */
-	int dtr_state;
-	int cts_state;	/* Handshaking pins (inputs) */
-	int dsr_state;
-	int dcd_state;
-	int ri_state;
-
-	unsigned long tx_start_time[N_OUT_URB];
-};
-
 /* Functions used by new usb-serial code. */
 static int __init option_init(void)
 {
@@ -1393,12 +1381,22 @@ static int option_probe(struct usb_serial *serial,
 	return 0;
 }
 
+static void option_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	usb_wwan_release(serial);
+
+	kfree(priv);
+}
+
 static void option_instat_callback(struct urb *urb)
 {
 	int err;
 	int status = urb->status;
 	struct usb_serial_port *port =  urb->context;
-	struct option_port_private *portdata = usb_get_serial_port_data(port);
+	struct usb_wwan_port_private *portdata =
+					usb_get_serial_port_data(port);
 
 	dbg("%s", __func__);
 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
@@ -1459,7 +1457,7 @@ static int option_send_setup(struct usb_serial_port *port)
 	struct usb_serial *serial = port->serial;
 	struct usb_wwan_intf_private *intfdata =
 		(struct usb_wwan_intf_private *) serial->private;
-	struct option_port_private *portdata;
+	struct usb_wwan_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 	dbg("%s", __func__);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 3187d8b..6634477 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -105,7 +105,13 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1410, 0xa021)},	/* Novatel Gobi 3000 Composite */
 	{USB_DEVICE(0x413c, 0x8193)},	/* Dell Gobi 3000 QDL */
 	{USB_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
+	{USB_DEVICE(0x1199, 0x9010)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9012)},	/* Sierra Wireless Gobi 3000 QDL */
 	{USB_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{USB_DEVICE(0x1199, 0x9014)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{USB_DEVICE(0x1199, 0x9018)},	/* Sierra Wireless Gobi 3000 QDL */
+	{USB_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
 	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
 	{ }				/* Terminating entry */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index e093585..535d087 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -304,6 +304,10 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	/* AT&T Direct IP LTE modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
 	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 38d7ebd..8bea45c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -669,12 +669,14 @@ exit:
 static struct usb_serial_driver *search_serial_device(
 					struct usb_interface *iface)
 {
-	const struct usb_device_id *id;
+	const struct usb_device_id *id = NULL;
 	struct usb_serial_driver *drv;
+	struct usb_driver *driver = to_usb_driver(iface->dev.driver);
 
 	/* Check if the usb id matches a known device */
 	list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
-		id = get_iface_id(drv, iface);
+		if (drv->usb_driver == driver)
+			id = get_iface_id(drv, iface);
 		if (id)
 			return drv;
 	}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 591f57f..6dcb5c4 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1107,6 +1107,13 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		USB_SC_RBC, USB_PR_BULK, NULL,
 		0 ),
 
+/* Feiya QDI U2 DISK, reported by Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff,
+		"Feiya",
+		"QDI U2 DISK",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_READ_CAPACITY_16 ),
+
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		"Feiya",
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 9f63e49..5ef7afb 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -858,6 +858,7 @@ int fuse_update_attributes(struct inode *inode, struct kstat *stat,
 		if (stat) {
 			generic_fillattr(inode, stat);
 			stat->mode = fi->orig_i_mode;
+			stat->ino = fi->orig_ino;
 		}
 	}
 
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index cf6db0a..89c4a58 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -82,6 +82,9 @@ struct fuse_inode {
 	    preserve the original mode */
 	mode_t orig_i_mode;
 
+	/** 64 bit inode number */
+	u64 orig_ino;
+
 	/** Version of last attribute change */
 	u64 attr_version;
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index aa83109..1f82d95 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -91,6 +91,7 @@ static struct inode *fuse_alloc_inode(struct super_block *sb)
 	fi->nlookup = 0;
 	fi->attr_version = 0;
 	fi->writectr = 0;
+	fi->orig_ino = 0;
 	INIT_LIST_HEAD(&fi->write_files);
 	INIT_LIST_HEAD(&fi->queued_writes);
 	INIT_LIST_HEAD(&fi->writepages);
@@ -140,6 +141,18 @@ static int fuse_remount_fs(struct super_block *sb, int *flags, char *data)
 	return 0;
 }
 
+/*
+ * ino_t is 32-bits on 32-bit arch. We have to squash the 64-bit value down
+ * so that it will fit.
+ */
+static ino_t fuse_squash_ino(u64 ino64)
+{
+	ino_t ino = (ino_t) ino64;
+	if (sizeof(ino_t) < sizeof(u64))
+		ino ^= ino64 >> (sizeof(u64) - sizeof(ino_t)) * 8;
+	return ino;
+}
+
 void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
 				   u64 attr_valid)
 {
@@ -149,7 +162,7 @@ void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
 	fi->attr_version = ++fc->attr_version;
 	fi->i_time = attr_valid;
 
-	inode->i_ino     = attr->ino;
+	inode->i_ino     = fuse_squash_ino(attr->ino);
 	inode->i_mode    = (inode->i_mode & S_IFMT) | (attr->mode & 07777);
 	set_nlink(inode, attr->nlink);
 	inode->i_uid     = attr->uid;
@@ -175,6 +188,8 @@ void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
 	fi->orig_i_mode = inode->i_mode;
 	if (!(fc->flags & FUSE_DEFAULT_PERMISSIONS))
 		inode->i_mode &= ~S_ISVTX;
+
+	fi->orig_ino = attr->ino;
 }
 
 void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index a3cae5d..8000459 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1825,6 +1825,7 @@ static struct nfs4_state *nfs4_do_open(struct inode *dir, struct dentry *dentry,
 	struct nfs4_state *res;
 	int status;
 
+	fmode &= FMODE_READ|FMODE_WRITE;
 	do {
 		status = _nfs4_do_open(dir, dentry, fmode, flags, sattr, cred, &res);
 		if (status == 0)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 7cda65b..c0cfa0d 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -176,6 +176,8 @@ enum pci_dev_flags {
 	PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
 	/* Provide indication device is assigned by a Virtual Machine Manager */
 	PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
+	/* Device causes system crash if in D3 during S3 sleep */
+	PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
 };
 
 enum pci_irq_reroute_variant {
diff --git a/include/linux/swapops.h b/include/linux/swapops.h
index 2189d3f..d6955607 100644
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -8,13 +8,15 @@
  * get good packing density in that tree, so the index should be dense in
  * the low-order bits.
  *
- * We arrange the `type' and `offset' fields so that `type' is at the five
+ * We arrange the `type' and `offset' fields so that `type' is at the seven
  * high-order bits of the swp_entry_t and `offset' is right-aligned in the
- * remaining bits.
+ * remaining bits.  Although `type' itself needs only five bits, we allow for
+ * shmem/tmpfs to shift it all up a further two bits: see swp_to_radix_entry().
  *
  * swp_entry_t's are *never* stored anywhere in their arch-dependent format.
  */
-#define SWP_TYPE_SHIFT(e)	(sizeof(e.val) * 8 - MAX_SWAPFILES_SHIFT)
+#define SWP_TYPE_SHIFT(e)	((sizeof(e.val) * 8) - \
+			(MAX_SWAPFILES_SHIFT + RADIX_TREE_EXCEPTIONAL_SHIFT))
 #define SWP_OFFSET_MASK(e)	((1UL << SWP_TYPE_SHIFT(e)) - 1)
 
 /*
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 64cec8d..03354d5 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -128,8 +128,6 @@ struct usb_hcd {
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
-	unsigned		broken_pci_sleep:1;	/* Don't put the
-			controller in PCI-D3 for system sleep */
 
 	int			irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */
diff --git a/kernel/sched.c b/kernel/sched.c
index 299f55c..576a27f 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7429,11 +7429,8 @@ int sched_domain_level_max;
 
 static int __init setup_relax_domain_level(char *str)
 {
-	unsigned long val;
-
-	val = simple_strtoul(str, NULL, 0);
-	if (val < sched_domain_level_max)
-		default_relax_domain_level = val;
+	if (kstrtoint(str, 0, &default_relax_domain_level))
+		pr_warn("Unable to set relax_domain_level\n");
 
 	return 1;
 }
@@ -7636,7 +7633,6 @@ struct sched_domain *build_sched_domain(struct sched_domain_topology_level *tl,
 	if (!sd)
 		return child;
 
-	set_domain_attribute(sd, attr);
 	cpumask_and(sched_domain_span(sd), cpu_map, tl->mask(cpu));
 	if (child) {
 		sd->level = child->level + 1;
@@ -7644,6 +7640,7 @@ struct sched_domain *build_sched_domain(struct sched_domain_topology_level *tl,
 		child->parent = sd;
 	}
 	sd->child = child;
+	set_domain_attribute(sd, attr);
 
 	return sd;
 }
diff --git a/mm/swapfile.c b/mm/swapfile.c
index d3955f2..fad1830 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1921,24 +1921,20 @@ static unsigned long read_swap_header(struct swap_info_struct *p,
 
 	/*
 	 * Find out how many pages are allowed for a single swap
-	 * device. There are three limiting factors: 1) the number
+	 * device. There are two limiting factors: 1) the number
 	 * of bits for the swap offset in the swp_entry_t type, and
 	 * 2) the number of bits in the swap pte as defined by the
-	 * the different architectures, and 3) the number of free bits
-	 * in an exceptional radix_tree entry. In order to find the
+	 * different architectures. In order to find the
 	 * largest possible bit mask, a swap entry with swap type 0
 	 * and swap offset ~0UL is created, encoded to a swap pte,
 	 * decoded to a swp_entry_t again, and finally the swap
 	 * offset is extracted. This will mask all the bits from
 	 * the initial ~0UL mask that can't be encoded in either
 	 * the swp_entry_t or the architecture definition of a
-	 * swap pte.  Then the same is done for a radix_tree entry.
+	 * swap pte.
 	 */
 	maxpages = swp_offset(pte_to_swp_entry(
-			swp_entry_to_pte(swp_entry(0, ~0UL))));
-	maxpages = swp_offset(radix_to_swp_entry(
-			swp_to_radix_entry(swp_entry(0, maxpages)))) + 1;
-
+			swp_entry_to_pte(swp_entry(0, ~0UL)))) + 1;
 	if (maxpages > swap_header->info.last_page) {
 		maxpages = swap_header->info.last_page + 1;
 		/* p->max is an unsigned int: don't overflow it */
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 30d7355..f4ddf34 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -495,6 +495,18 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		ieee80211_configure_filter(local);
 		break;
 	default:
+		mutex_lock(&local->mtx);
+		if (local->hw_roc_dev == sdata->dev &&
+		    local->hw_roc_channel) {
+			/* ignore return value since this is racy */
+			drv_cancel_remain_on_channel(local);
+			ieee80211_queue_work(&local->hw, &local->hw_roc_done);
+		}
+		mutex_unlock(&local->mtx);
+
+		flush_work(&local->hw_roc_start);
+		flush_work(&local->hw_roc_done);
+
 		flush_work(&sdata->work);
 		/*
 		 * When we get here, the interface is marked down.
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 1b239be..db2c215 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -246,6 +246,22 @@ static void ieee80211_hw_roc_done(struct work_struct *work)
 		return;
 	}
 
+	/* was never transmitted */
+	if (local->hw_roc_skb) {
+		u64 cookie;
+
+		cookie = local->hw_roc_cookie ^ 2;
+
+		cfg80211_mgmt_tx_status(local->hw_roc_dev, cookie,
+					local->hw_roc_skb->data,
+					local->hw_roc_skb->len, false,
+					GFP_KERNEL);
+
+		kfree_skb(local->hw_roc_skb);
+		local->hw_roc_skb = NULL;
+		local->hw_roc_skb_for_status = NULL;
+	}
+
 	if (!local->hw_roc_for_tx)
 		cfg80211_remain_on_channel_expired(local->hw_roc_dev,
 						   local->hw_roc_cookie,
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index d4ad50e..c80c162 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1358,7 +1358,8 @@ bc_svc_process(struct svc_serv *serv, struct rpc_rqst *req,
 						sizeof(req->rq_snd_buf));
 		return bc_send(req);
 	} else {
-		/* Nothing to do to drop request */
+		/* drop request */
+		xprt_free_bc_request(req);
 		return 0;
 	}
 }
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 8bf8902..d38815d 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -943,6 +943,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 				  enum nl80211_iftype iftype)
 {
 	struct wireless_dev *wdev_iter;
+	u32 used_iftypes = BIT(iftype);
 	int num[NUM_NL80211_IFTYPES];
 	int total = 1;
 	int i, j;
@@ -976,12 +977,14 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 
 		num[wdev_iter->iftype]++;
 		total++;
+		used_iftypes |= BIT(wdev_iter->iftype);
 	}
 	mutex_unlock(&rdev->devlist_mtx);
 
 	for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) {
 		const struct ieee80211_iface_combination *c;
 		struct ieee80211_iface_limit *limits;
+		u32 all_iftypes = 0;
 
 		c = &rdev->wiphy.iface_combinations[i];
 
@@ -996,6 +999,7 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 			if (rdev->wiphy.software_iftypes & BIT(iftype))
 				continue;
 			for (j = 0; j < c->n_limits; j++) {
+				all_iftypes |= limits[j].types;
 				if (!(limits[j].types & BIT(iftype)))
 					continue;
 				if (limits[j].max < num[iftype])
@@ -1003,7 +1007,20 @@ int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev,
 				limits[j].max -= num[iftype];
 			}
 		}
-		/* yay, it fits */
+
+		/*
+		 * Finally check that all iftypes that we're currently
+		 * using are actually part of this combination. If they
+		 * aren't then we can't use this combination and have
+		 * to continue to the next.
+		 */
+		if ((all_iftypes & used_iftypes) != used_iftypes)
+			goto cont;
+
+		/*
+		 * This combination covered all interface types and
+		 * supported the requested numbers, so we're good.
+		 */
 		kfree(limits);
 		return 0;
  cont:
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 71f6744..78b2223 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -858,6 +858,7 @@ struct hda_codec {
 	unsigned int pins_shutup:1;	/* pins are shut up */
 	unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
 	unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
+	unsigned int no_jack_detect:1;	/* Machine has no jack-detection */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	unsigned int power_on :1;	/* current (global) power-state */
 	unsigned int power_transition :1; /* power-state in transition */
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 368f0c5..c78b753 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -515,6 +515,8 @@ int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid);
 
 static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
 {
+	if (codec->no_jack_detect)
+		return false;
 	if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
 		return false;
 	if (!codec->ignore_misc_bit &&
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0bc5a46..0005bde 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5278,8 +5278,10 @@ static const struct hda_amp_list alc861_loopbacks[] = {
 
 /* Pin config fixes */
 enum {
-	PINFIX_FSC_AMILO_PI1505,
-	PINFIX_ASUS_A6RP,
+	ALC861_FIXUP_FSC_AMILO_PI1505,
+	ALC861_FIXUP_AMP_VREF_0F,
+	ALC861_FIXUP_NO_JACK_DETECT,
+	ALC861_FIXUP_ASUS_A6RP,
 };
 
 /* On some laptops, VREF of pin 0x0f is abused for controlling the main amp */
@@ -5301,8 +5303,16 @@ static void alc861_fixup_asus_amp_vref_0f(struct hda_codec *codec,
 	spec->keep_vref_in_automute = 1;
 }
 
+/* suppress the jack-detection */
+static void alc_fixup_no_jack_detect(struct hda_codec *codec,
+				     const struct alc_fixup *fix, int action)
+{
+	if (action == ALC_FIXUP_ACT_PRE_PROBE)
+		codec->no_jack_detect = 1;
+}	
+
 static const struct alc_fixup alc861_fixups[] = {
-	[PINFIX_FSC_AMILO_PI1505] = {
+	[ALC861_FIXUP_FSC_AMILO_PI1505] = {
 		.type = ALC_FIXUP_PINS,
 		.v.pins = (const struct alc_pincfg[]) {
 			{ 0x0b, 0x0221101f }, /* HP */
@@ -5310,16 +5320,29 @@ static const struct alc_fixup alc861_fixups[] = {
 			{ }
 		}
 	},
-	[PINFIX_ASUS_A6RP] = {
+	[ALC861_FIXUP_AMP_VREF_0F] = {
 		.type = ALC_FIXUP_FUNC,
 		.v.func = alc861_fixup_asus_amp_vref_0f,
 	},
+	[ALC861_FIXUP_NO_JACK_DETECT] = {
+		.type = ALC_FIXUP_FUNC,
+		.v.func = alc_fixup_no_jack_detect,
+	},
+	[ALC861_FIXUP_ASUS_A6RP] = {
+		.type = ALC_FIXUP_FUNC,
+		.v.func = alc861_fixup_asus_amp_vref_0f,
+		.chained = true,
+		.chain_id = ALC861_FIXUP_NO_JACK_DETECT,
+	}
 };
 
 static const struct snd_pci_quirk alc861_fixup_tbl[] = {
-	SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", PINFIX_ASUS_A6RP),
-	SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", PINFIX_ASUS_A6RP),
-	SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505),
+	SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", ALC861_FIXUP_ASUS_A6RP),
+	SND_PCI_QUIRK_VENDOR(0x1043, "ASUS laptop", ALC861_FIXUP_AMP_VREF_0F),
+	SND_PCI_QUIRK(0x1462, 0x7254, "HP DX2200", ALC861_FIXUP_NO_JACK_DETECT),
+	SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", ALC861_FIXUP_AMP_VREF_0F),
+	SND_PCI_QUIRK(0x1584, 0x0000, "Uniwill ECS M31EI", ALC861_FIXUP_AMP_VREF_0F),
+	SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", ALC861_FIXUP_FSC_AMILO_PI1505),
 	{}
 };
 
@@ -5571,6 +5594,8 @@ enum {
 	ALC662_FIXUP_ASUS_MODE6,
 	ALC662_FIXUP_ASUS_MODE7,
 	ALC662_FIXUP_ASUS_MODE8,
+	ALC662_FIXUP_NO_JACK_DETECT,
+	ALC662_FIXUP_ZOTAC_Z68,
 };
 
 static const struct alc_fixup alc662_fixups[] = {
@@ -5716,6 +5741,17 @@ static const struct alc_fixup alc662_fixups[] = {
 		.chained = true,
 		.chain_id = ALC662_FIXUP_SKU_IGNORE
 	},
+	[ALC662_FIXUP_NO_JACK_DETECT] = {
+		.type = ALC_FIXUP_FUNC,
+		.v.func = alc_fixup_no_jack_detect,
+	},
+	[ALC662_FIXUP_ZOTAC_Z68] = {
+		.type = ALC_FIXUP_PINS,
+		.v.pins = (const struct alc_pincfg[]) {
+			{ 0x1b, 0x02214020 }, /* Front HP */
+			{ }
+		}
+	},
 };
 
 static const struct snd_pci_quirk alc662_fixup_tbl[] = {
@@ -5724,10 +5760,12 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x031c, "Gateway NV79", ALC662_FIXUP_SKU_IGNORE),
 	SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
 	SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
+	SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT),
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_FIXUP_ASUS_MODE2),
 	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
+	SND_PCI_QUIRK(0x19da, 0xa130, "Zotac Z68", ALC662_FIXUP_ZOTAC_Z68),
 	SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T),
 
 #if 0
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 3e7aa22..de61b8a 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -41,6 +41,39 @@
 #define WM8994_NUM_DRC 3
 #define WM8994_NUM_EQ  3
 
+static struct {
+	unsigned int reg;
+	unsigned int mask;
+} wm8994_vu_bits[] = {
+	{ WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+	{ WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
+	{ WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+	{ WM8994_RIGHT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
+	{ WM8994_SPEAKER_VOLUME_LEFT, WM8994_SPKOUT_VU },
+	{ WM8994_SPEAKER_VOLUME_RIGHT, WM8994_SPKOUT_VU },
+	{ WM8994_LEFT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+	{ WM8994_RIGHT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
+	{ WM8994_LEFT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+	{ WM8994_RIGHT_OPGA_VOLUME, WM8994_MIXOUT_VU },
+
+	{ WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU },
+	{ WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU },
+	{ WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU },
+	{ WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU },
+	{ WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU },
+	{ WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU },
+	{ WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU },
+	{ WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU },
+	{ WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU },
+	{ WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
+	{ WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU },
+	{ WM8994_DAC1_RIGHT_VOLUME, WM8994_DAC1_VU },
+	{ WM8994_DAC2_LEFT_VOLUME, WM8994_DAC2_VU },
+	{ WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU },
+};
+
 static int wm8994_drc_base[] = {
 	WM8994_AIF1_DRC1_1,
 	WM8994_AIF1_DRC2_1,
@@ -889,6 +922,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w,
 	struct snd_soc_codec *codec = w->codec;
 	struct wm8994 *control = codec->control_data;
 	int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA;
+	int i;
 	int dac;
 	int adc;
 	int val;
@@ -947,6 +981,13 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w,
 				    WM8994_AIF1DAC2L_ENA);
 		break;
 
+	case SND_SOC_DAPM_POST_PMU:
+		for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+			snd_soc_write(codec, wm8994_vu_bits[i].reg,
+				      snd_soc_read(codec,
+						   wm8994_vu_bits[i].reg));
+		break;
+
 	case SND_SOC_DAPM_PRE_PMD:
 	case SND_SOC_DAPM_POST_PMD:
 		snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
@@ -972,6 +1013,7 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w,
 		      struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_codec *codec = w->codec;
+	int i;
 	int dac;
 	int adc;
 	int val;
@@ -1022,6 +1064,13 @@ static int aif2clk_ev(struct snd_soc_dapm_widget *w,
 				    WM8994_AIF2DACR_ENA);
 		break;
 
+	case SND_SOC_DAPM_POST_PMU:
+		for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+			snd_soc_write(codec, wm8994_vu_bits[i].reg,
+				      snd_soc_read(codec,
+						   wm8994_vu_bits[i].reg));
+		break;
+
 	case SND_SOC_DAPM_PRE_PMD:
 	case SND_SOC_DAPM_POST_PMD:
 		snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5,
@@ -1090,17 +1139,19 @@ static int late_enable_ev(struct snd_soc_dapm_widget *w,
 	switch (event) {
 	case SND_SOC_DAPM_PRE_PMU:
 		if (wm8994->aif1clk_enable) {
-			aif1clk_ev(w, kcontrol, event);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
 			snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
 					    WM8994_AIF1CLK_ENA_MASK,
 					    WM8994_AIF1CLK_ENA);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
 			wm8994->aif1clk_enable = 0;
 		}
 		if (wm8994->aif2clk_enable) {
-			aif2clk_ev(w, kcontrol, event);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
 			snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
 					    WM8994_AIF2CLK_ENA_MASK,
 					    WM8994_AIF2CLK_ENA);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
 			wm8994->aif2clk_enable = 0;
 		}
 		break;
@@ -1121,15 +1172,17 @@ static int late_disable_ev(struct snd_soc_dapm_widget *w,
 	switch (event) {
 	case SND_SOC_DAPM_POST_PMD:
 		if (wm8994->aif1clk_disable) {
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
 			snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1,
 					    WM8994_AIF1CLK_ENA_MASK, 0);
-			aif1clk_ev(w, kcontrol, event);
+			aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
 			wm8994->aif1clk_disable = 0;
 		}
 		if (wm8994->aif2clk_disable) {
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
 			snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1,
 					    WM8994_AIF2CLK_ENA_MASK, 0);
-			aif2clk_ev(w, kcontrol, event);
+			aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
 			wm8994->aif2clk_disable = 0;
 		}
 		break;
@@ -1466,9 +1519,11 @@ SND_SOC_DAPM_POST("Late Disable PGA", late_disable_ev)
 
 static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = {
 SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev,
-		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		    SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev,
-		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD),
+		    SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		    SND_SOC_DAPM_PRE_PMD),
 SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0,
 		   left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
@@ -3482,39 +3537,11 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 
 	wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
-	/* Latch volume updates (right only; we always do left then right). */
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_LEFT_VOLUME,
-			    WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME,
-			    WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC2_LEFT_VOLUME,
-			    WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME,
-			    WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_DAC_LEFT_VOLUME,
-			    WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME,
-			    WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC1_LEFT_VOLUME,
-			    WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME,
-			    WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC2_LEFT_VOLUME,
-			    WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME,
-			    WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_ADC_LEFT_VOLUME,
-			    WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME,
-			    WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
-	snd_soc_update_bits(codec, WM8994_DAC1_LEFT_VOLUME,
-			    WM8994_DAC1_VU, WM8994_DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME,
-			    WM8994_DAC1_VU, WM8994_DAC1_VU);
-	snd_soc_update_bits(codec, WM8994_DAC2_LEFT_VOLUME,
-			    WM8994_DAC2_VU, WM8994_DAC2_VU);
-	snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME,
-			    WM8994_DAC2_VU, WM8994_DAC2_VU);
+	/* Latch volume update bits */
+	for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
+		snd_soc_update_bits(codec, wm8994_vu_bits[i].reg,
+				    wm8994_vu_bits[i].mask,
+				    wm8994_vu_bits[i].mask);
 
 	/* Set the low bit of the 3D stereo depth so TLV matches */
 	snd_soc_update_bits(codec, WM8994_AIF1_DAC1_FILTERS_2,


-- 
Ben Hutchings
Time is nature's way of making sure that everything doesn't happen at once.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 46/69] USB: cdc-wdm: Add Vodafone/Huawei K5005 support

[Bjørn Mork]

Ben Hutchings <ben@decadent.org.uk> writes:

> 3.2-stable review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: Bjørn Mork <bjorn@mork.no>
>
> commit de102ef41f24a4c251c4a3838796bb27557d4d93 upstream.
>
> Tested-by: Thomas Schäfer <tschaefer@t-online.de>
> Signed-off-by: Bjørn Mork <bjorn@mork.no>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  drivers/usb/class/cdc-wdm.c |    9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
> index ea8b304..8fd398d 100644
> --- a/drivers/usb/class/cdc-wdm.c
> +++ b/drivers/usb/class/cdc-wdm.c
> @@ -55,6 +55,15 @@ static const struct usb_device_id wdm_ids[] = {
>  		.bInterfaceSubClass = 1,
>  		.bInterfaceProtocol = 9, /* NOTE: CDC ECM control interface! */
>  	},
> +	{
> +		 /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
> +		.match_flags        = USB_DEVICE_ID_MATCH_VENDOR |
> +				      USB_DEVICE_ID_MATCH_INT_INFO,
> +		.idVendor           = HUAWEI_VENDOR_ID,
> +		.bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
> +		.bInterfaceSubClass = 1,
> +		.bInterfaceProtocol = 57, /* NOTE: CDC ECM control interface! */
> +	},
>  	{ }
>  };


This interface is half of a control+data interface set being handled by
the cdc-wdm and qmi_wwan drivers in cooperation.  The qmi_wwan driver
was first included in 3.4. 

Adding only half of the set to cdc-wdm in older stable versions does not
make much sense. I believe this patch should only be applied to 3.4.x
and later.  Sorry for not thinking about this earlier and making it
clear in the patch submission.



Bjørn

Re: [ 45/69] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems

[Bjørn Mork]

Ben Hutchings <ben@decadent.org.uk> writes:

> 3.2-stable review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: Bjørn Mork <bjorn@mork.no>
>
> commit fec67b45bf045582c3172101970090d640cd56d9 upstream.
>
This should be dropped for the same reason as patch #46


Bjørn

Re: [ 45/69] usb: cdc-wdm: Add device-id for Huawei 3G/LTE modems

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 527 bytes --]

On Sun, 2012-06-17 at 22:51 +0200, Bjørn Mork wrote:
> Ben Hutchings <ben@decadent.org.uk> writes:
> 
> > 3.2-stable review patch.  If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Bjørn Mork <bjorn@mork.no>
> >
> > commit fec67b45bf045582c3172101970090d640cd56d9 upstream.
> >
> This should be dropped for the same reason as patch #46

OK, will drop them both.

Ben.

-- 
Ben Hutchings
Time is nature's way of making sure that everything doesn't happen at once.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 60/69] usb-storage: Add 090c:1000 to unusal-devs

[Hans de Goede]

Hi,

I'm not sure if this is needed with 3.2, it is needed with 3.4 because
recently the usb-storage driver was changed to report the supported
scsi level as reported by the device, rather then always report a
scsi level of 2. This change causes sd.c to try READ_CAPACITY(16)
first, which foobars up not only this one device, but as it turns
out a lot of others too, so we're working on another fix
(and I believe that 3.2 is unaffected).

With that said, this patch certainly cannot hurt in any way...

Regards,

Hans


On 06/17/2012 08:00 PM, Ben Hutchings wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.
>
> ------------------
>
> From: Hans de Goede<hdegoede@redhat.com>
>
> commit afff07e61a5243e14ee3f0a272a0380cd744a8a3 upstream.
>
> This device gives a bogus answer to get_capacity(16):
> [ 8628.278614] scsi 8:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  1100 PQ: 0 ANSI: 4
> [ 8628.279452] sd 8:0:0:0: Attached scsi generic sg4 type 0
> [ 8628.280338] sd 8:0:0:0: [sdd] 35747322042253313 512-byte logical blocks: (18.3 EB/15.8 EiB)
>
> So set the quirk flag to avoid using get_capacity(16) with it:
> [11731.386014] usb-storage 2-1.6:1.0: Quirks match for vid 090c pid 1000: 80000
> [11731.386075] scsi9 : usb-storage 2-1.6:1.0
> [11731.386172] usbcore: registered new interface driver usb-storage
> [11731.386175] USB Mass Storage support registered.
> [11732.387394] scsi 9:0:0:0: Direct-Access     USB 2.0  USB Flash Drive  1100 PQ: 0 ANSI: 4
> [11732.388462] sd 9:0:0:0: Attached scsi generic sg3 type 0
> [11732.389432] sd 9:0:0:0: [sdc] 7975296 512-byte logical blocks: (4.08 GB/3.80 GiB)
>
> Which makes the capacity look a lot more sane :)
>
> Signed-off-by: Hans de Goede<hdegoede@redhat.com>
> Tested-by: Simon Raffeiner<sturmflut@lieberbiber.de>
> Signed-off-by: Greg Kroah-Hartman<gregkh@linuxfoundation.org>
> Signed-off-by: Ben Hutchings<ben@decadent.org.uk>
> ---
>   drivers/usb/storage/unusual_devs.h |    7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
> index 1719886..caf22bf 100644
> --- a/drivers/usb/storage/unusual_devs.h
> +++ b/drivers/usb/storage/unusual_devs.h
> @@ -1107,6 +1107,13 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
>   		USB_SC_RBC, USB_PR_BULK, NULL,
>   		0 ),
>
> +/* Feiya QDI U2 DISK, reported by Hans de Goede<hdegoede@redhat.com>  */
> +UNUSUAL_DEV( 0x090c, 0x1000, 0x0000, 0xffff,
> +		"Feiya",
> +		"QDI U2 DISK",
> +		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> +		US_FL_NO_READ_CAPACITY_16 ),
> +
>   /* aeb */
>   UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
>   		"Feiya",
>
>

Re: [ 60/69] usb-storage: Add 090c:1000 to unusal-devs

[Simon Raffeiner]

Hi,

I wrote the original bug report for the Feiya QDI U2 DISK (bug 43265)
and can confirm that the bug was introduced with kernel 3.4.

3.2 and 3.3 are unaffected.

regards,
Simon



On Mon, 18 Jun 2012 10:39:54 +0200
Hans de Goede <hdegoede@redhat.com> wrote:

> Hi,
> 
> I'm not sure if this is needed with 3.2, it is needed with 3.4 because
> recently the usb-storage driver was changed to report the supported
> scsi level as reported by the device, rather then always report a
> scsi level of 2. This change causes sd.c to try READ_CAPACITY(16)
> first, which foobars up not only this one device, but as it turns
> out a lot of others too, so we're working on another fix
> (and I believe that 3.2 is unaffected).
> 
> With that said, this patch certainly cannot hurt in any way...
> 
> Regards,
> 
> Hans
> 
> 
> On 06/17/2012 08:00 PM, Ben Hutchings wrote:
> > 3.2-stable review patch.  If anyone has any objections, please let
> > me know.
> >
> > ------------------
> >
> > From: Hans de Goede<hdegoede@redhat.com>
> >
> > commit afff07e61a5243e14ee3f0a272a0380cd744a8a3 upstream.
> >
> > This device gives a bogus answer to get_capacity(16):
> > [ 8628.278614] scsi 8:0:0:0: Direct-Access     USB 2.0  USB Flash
> > Drive  1100 PQ: 0 ANSI: 4 [ 8628.279452] sd 8:0:0:0: Attached scsi
> > generic sg4 type 0 [ 8628.280338] sd 8:0:0:0: [sdd]
> > 35747322042253313 512-byte logical blocks: (18.3 EB/15.8 EiB)
> >
> > So set the quirk flag to avoid using get_capacity(16) with it:
> > [11731.386014] usb-storage 2-1.6:1.0: Quirks match for vid 090c pid
> > 1000: 80000 [11731.386075] scsi9 : usb-storage 2-1.6:1.0
> > [11731.386172] usbcore: registered new interface driver usb-storage
> > [11731.386175] USB Mass Storage support registered.
> > [11732.387394] scsi 9:0:0:0: Direct-Access     USB 2.0  USB Flash
> > Drive  1100 PQ: 0 ANSI: 4 [11732.388462] sd 9:0:0:0: Attached scsi
> > generic sg3 type 0 [11732.389432] sd 9:0:0:0: [sdc] 7975296
> > 512-byte logical blocks: (4.08 GB/3.80 GiB)
> >
> > Which makes the capacity look a lot more sane :)
> >
> > Signed-off-by: Hans de Goede<hdegoede@redhat.com>
> > Tested-by: Simon Raffeiner<sturmflut@lieberbiber.de>
> > Signed-off-by: Greg Kroah-Hartman<gregkh@linuxfoundation.org>
> > Signed-off-by: Ben Hutchings<ben@decadent.org.uk>
> > ---
> >   drivers/usb/storage/unusual_devs.h |    7 +++++++
> >   1 file changed, 7 insertions(+)
> >
> > diff --git a/drivers/usb/storage/unusual_devs.h
> > b/drivers/usb/storage/unusual_devs.h index 1719886..caf22bf 100644
> > --- a/drivers/usb/storage/unusual_devs.h
> > +++ b/drivers/usb/storage/unusual_devs.h
> > @@ -1107,6 +1107,13 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
> >   		USB_SC_RBC, USB_PR_BULK, NULL,
> >   		0 ),
> >
> > +/* Feiya QDI U2 DISK, reported by Hans de
> > Goede<hdegoede@redhat.com>  */ +UNUSUAL_DEV( 0x090c, 0x1000,
> > 0x0000, 0xffff,
> > +		"Feiya",
> > +		"QDI U2 DISK",
> > +		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> > +		US_FL_NO_READ_CAPACITY_16 ),
> > +
> >   /* aeb */
> >   UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
> >   		"Feiya",
> >
> >

Re: [ 60/69] usb-storage: Add 090c:1000 to unusal-devs

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 402 bytes --]

On Mon, 2012-06-18 at 11:14 +0200, Simon Raffeiner wrote:
> Hi,
> 
> I wrote the original bug report for the Feiya QDI U2 DISK (bug 43265)
> and can confirm that the bug was introduced with kernel 3.4.
> 
> 3.2 and 3.3 are unaffected.
[...]

Thanks both for the information; I'll drop this.

Ben.

-- 
Ben Hutchings
If more than one person is responsible for a bug, no one is at fault.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 39/69] iwlwifi: disable the buggy chain extension feature in HW

[Herton Ronaldo Krzesinski]

On Sun, Jun 17, 2012 at 07:00:20PM +0100, Ben Hutchings wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
> 
> commit d012d04e4d6312ea157b6cf19e9689af934f5aa7 upstream.
> 
> This feature has been reported to be buggy and enabled by
> default. We therefore need to disable it manually.
> 
> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
> Signed-off-by: John W. Linville <linville@tuxdriver.com>
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  drivers/net/wireless/iwlwifi/iwl-prph.h       |    1 +
>  drivers/net/wireless/iwlwifi/iwl-trans-pcie.c |    5 +++++
>  2 files changed, 6 insertions(+)
> 
> --- a/drivers/net/wireless/iwlwifi/iwl-prph.h
> +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
> @@ -228,6 +228,7 @@
>  #define SCD_TXFACT		(SCD_BASE + 0x10)
>  #define SCD_ACTIVE		(SCD_BASE + 0x14)
>  #define SCD_QUEUECHAIN_SEL	(SCD_BASE + 0xe8)
> +#define SCD_CHAINEXT_EN		(SCD_BASE + 0x244)
>  #define SCD_AGGR_SEL		(SCD_BASE + 0x248)
>  #define SCD_INTERRUPT_MASK	(SCD_BASE + 0x108)
>  
> --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
> +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
> @@ -868,6 +868,11 @@
>  	iwl_write_prph(bus(trans), SCD_DRAM_BASE_ADDR,
>  		       trans_pcie->scd_bc_tbls.dma >> 10);
>  
> +	/* The chain extension of the SCD doesn't work well. This feature is
> +	 * enabled by default by the HW, so we need to disable it manually.
> +	 */
> +	iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
> +

Hi, this triggers the following build warning:
linux-stable/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c: In function 'iwl_trans_pcie_tx_start':
linux-stable/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c:874:2: warning: passing argument 1 of 'iwl_write_prph' from incompatible pointer type [enabled by default]
linux-stable/drivers/net/wireless/iwlwifi/iwl-io.h:72:6: note: expected 'struct iwl_bus *' but argument is of type 'struct iwl_trans *'

For 3.2, it should be passed as bus(trans) as other invocations.

>  	/* Enable DMA channel */
>  	for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
>  		iwl_write_direct32(bus(trans), FH_TCSR_CHNL_TX_CONFIG_REG(chan),
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
[]'s
Herton

RE: [ 39/69] iwlwifi: disable the buggy chain extension feature in HW

[Grumbach, Emmanuel]

> Hi, this triggers the following build warning:
> linux-stable/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c: In function
> 'iwl_trans_pcie_tx_start':
> linux-stable/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c:874:2: warning:
> passing argument 1 of 'iwl_write_prph' from incompatible pointer type
> [enabled by default]
> linux-stable/drivers/net/wireless/iwlwifi/iwl-io.h:72:6: note: expected 'struct
> iwl_bus *' but argument is of type 'struct iwl_trans *'
> 
> For 3.2, it should be passed as bus(trans) as other invocations.
> 
> >  	/* Enable DMA channel */
> >  	for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
> >  		iwl_write_direct32(bus(trans),
> FH_TCSR_CHNL_TX_CONFIG_REG(chan),

Correct


---------------------------------------------------------------------
Intel Israel (74) Limited

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.

Re: [ 04/69] drm/i915: fix up ivb plane 3 pageflips

[Herton Ronaldo Krzesinski]

On Sun, Jun 17, 2012 at 06:59:45PM +0100, Ben Hutchings wrote:
> 3.2-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Daniel Vetter <daniel.vetter@ffwll.ch>
> 
> commit cb05d8dedefa3066bf5d74ef88c6ca6cf4bd1c87 upstream.
> 
> Or at least plug another gapping hole. Apparrently hw desingers only
> moved the bit field, but did not bother ot re-enumerate the planes
> when adding support for a 3rd pipe.
> 
> Discovered by i-g-t/flip_test.
> 
> This may or may not fix the reference bugzilla, because that one
> smells like we have still larger fish to fry.
> 
> v2: Fixup the impossible case to catch programming errors, noticed by
> Chris Wilson.
> 
> References: https://bugs.freedesktop.org/show_bug.cgi?id=50069
> Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
> Eugeni Dodonov <eugeni.dodonov@intel.com>
> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> [bwh: Backported to 3.2: adjust context]
> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
> ---
>  drivers/gpu/drm/i915/i915_reg.h      |    8 ++++++++
>  drivers/gpu/drm/i915/intel_display.c |   19 ++++++++++++++++++-
>  2 files changed, 26 insertions(+), 1 deletion(-)
> 
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -164,6 +164,14 @@
>  #define MI_DISPLAY_FLIP		MI_INSTR(0x14, 2)
>  #define MI_DISPLAY_FLIP_I915	MI_INSTR(0x14, 1)
>  #define   MI_DISPLAY_FLIP_PLANE(n) ((n) << 20)
> +/* IVB has funny definitions for which plane to flip. */
> +#define   MI_DISPLAY_FLIP_IVB_PLANE_A  (0 << 19)
> +#define   MI_DISPLAY_FLIP_IVB_PLANE_B  (1 << 19)
> +#define   MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19)
> +#define   MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
> +#define   MI_DISPLAY_FLIP_IVB_PLANE_C  (4 << 19)
> +#define   MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
> +
>  #define MI_SET_CONTEXT		MI_INSTR(0x18, 0)
>  #define   MI_MM_SPACE_GTT		(1<<8)
>  #define   MI_MM_SPACE_PHYSICAL		(0<<8)
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7176,17 +7176,34 @@
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>  	struct intel_ring_buffer *ring = &dev_priv->ring[BCS];
> +	uint32_t plane_bit = 0;
>  	int ret;
>  
>  	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
>  	if (ret)
>  		goto err;
>  
> +	switch(intel_crtc->plane) {
> +	case PLANE_A:
> +		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
> +		break;
> +	case PLANE_B:
> +		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
> +		break;
> +	case PLANE_C:
> +		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
> +		break;
> +	default:
> +		WARN_ONCE(1, "unknown plane in flip command\n");
> +		ret = -ENODEV;
> +		goto err;

Shouldn't this have been "goto err_unpin;"?

It's not a problem in the backport for 3.2, same code is in the original
patch, just noticed it seems a problem while looking at it; but by what
changelog says the default case is said to not trigger in "practice"
(catch programming error), so I think it doesn't pose a real issue in
practice.

> +	}
> +
>  	ret = intel_ring_begin(ring, 4);
>  	if (ret)
>  		goto err_unpin;
>  
> -	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
> +	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | plane_bit);
>  	intel_ring_emit(ring, (fb->pitch | obj->tiling_mode));
>  	intel_ring_emit(ring, (obj->gtt_offset));
>  	intel_ring_emit(ring, (MI_NOOP));
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe stable" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
[]'s
Herton

Re: [ 04/69] drm/i915: fix up ivb plane 3 pageflips

[Eugeni Dodonov]

On 06/18/2012 06:55 PM, Herton Ronaldo Krzesinski wrote:
>> +	default:
>> +		WARN_ONCE(1, "unknown plane in flip command\n");
>> +		ret = -ENODEV;
>> +		goto err;
> 
> Shouldn't this have been "goto err_unpin;"?
> 
> It's not a problem in the backport for 3.2, same code is in the original
> patch, just noticed it seems a problem while looking at it; but by what
> changelog says the default case is said to not trigger in "practice"
> (catch programming error), so I think it doesn't pose a real issue in
> practice.

You are right, it should be err_unpin. I sent a patch rectifying this.

In practice, this should not happen, but still, better be safe than
sorry. Thanks for catching that!

Eugeni

RE: [ 39/69] iwlwifi: disable the buggy chain extension feature in HW

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 990 bytes --]

On Mon, 2012-06-18 at 19:23 +0000, Grumbach, Emmanuel wrote:
> > Hi, this triggers the following build warning:
> > linux-stable/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c: In function
> > 'iwl_trans_pcie_tx_start':
> > linux-stable/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c:874:2: warning:
> > passing argument 1 of 'iwl_write_prph' from incompatible pointer type
> > [enabled by default]
> > linux-stable/drivers/net/wireless/iwlwifi/iwl-io.h:72:6: note: expected 'struct
> > iwl_bus *' but argument is of type 'struct iwl_trans *'
> > 
> > For 3.2, it should be passed as bus(trans) as other invocations.
> > 
> > >  	/* Enable DMA channel */
> > >  	for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
> > >  		iwl_write_direct32(bus(trans),
> > FH_TCSR_CHNL_TX_CONFIG_REG(chan),
> 
> Correct

Thanks both, I'll fix this up.  No idea how I missed that warning.

Ben.

-- 
Ben Hutchings
If more than one person is responsible for a bug, no one is at fault.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 04/69] drm/i915: fix up ivb plane 3 pageflips

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 967 bytes --]

On Mon, 2012-06-18 at 19:10 -0300, Eugeni Dodonov wrote:
> On 06/18/2012 06:55 PM, Herton Ronaldo Krzesinski wrote:
> >> +	default:
> >> +		WARN_ONCE(1, "unknown plane in flip command\n");
> >> +		ret = -ENODEV;
> >> +		goto err;
> > 
> > Shouldn't this have been "goto err_unpin;"?
> > 
> > It's not a problem in the backport for 3.2, same code is in the original
> > patch, just noticed it seems a problem while looking at it; but by what
> > changelog says the default case is said to not trigger in "practice"
> > (catch programming error), so I think it doesn't pose a real issue in
> > practice.
> 
> You are right, it should be err_unpin. I sent a patch rectifying this.
> 
> In practice, this should not happen, but still, better be safe than
> sorry. Thanks for catching that!

So should I drop this until the second patch is upstream?

Ben.

-- 
Ben Hutchings
If more than one person is responsible for a bug, no one is at fault.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 04/69] drm/i915: fix up ivb plane 3 pageflips

[Daniel Vetter]

On Tue, Jun 19, 2012 at 5:59 AM, Ben Hutchings <ben@decadent.org.uk>
> So should I drop this until the second patch is upstream?

Nah, just merge it. It covers a truly impossible situation, and I've
decided to not push Eugeni's fixup through -fixes because if that.
Still, thanks for catching this.
-Daniel
-- 
Daniel Vetter
daniel.vetter@ffwll.ch - +41 (0) 79 365 57 48 - http://blog.ffwll.ch

Re: [ 04/69] drm/i915: fix up ivb plane 3 pageflips

[Eugeni Dodonov]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On 06/19/2012 12:59 AM, Ben Hutchings wrote:
> On Mon, 2012-06-18 at 19:10 -0300, Eugeni Dodonov wrote:
>> On 06/18/2012 06:55 PM, Herton Ronaldo Krzesinski wrote:
>>>> +	default: +		WARN_ONCE(1, "unknown plane in flip 
>>>> command\n"); +		ret = -ENODEV; +		goto err;
>>> 
>>> Shouldn't this have been "goto err_unpin;"?
>>> 
>>> It's not a problem in the backport for 3.2, same code is in the
>>> original patch, just noticed it seems a problem while looking
>>> at it; but by what changelog says the default case is said to
>>> not trigger in "practice" (catch programming error), so I think
>>> it doesn't pose a real issue in practice.
>> 
>> You are right, it should be err_unpin. I sent a patch rectifying
>>  this.
>> 
>> In practice, this should not happen, but still, better be safe 
>> than sorry. Thanks for catching that!
> 
> So should I drop this until the second patch is upstream?

I don't think there is a need. It is nearly impossible to hit this
situation, and if it happens the machine will be quite broken in a way
this patch won't help recovering it anyway.

So you could merge the original patch as is - it fixes some real
issues on Ivy Bridge which are much more likely to happen.

Eugeni
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iQEcBAEBCAAGBQJP4GZZAAoJEPE+raS4SlCBBncH/08HYA+d304lNiEKSq7i/0i7
V399aS9KtimsXNKsf7wal017hmxevujc5fElY5lFYM0RTw3nEUGmnOlWZ0FdRt/S
BuIz6BQ5RcZBexdYxwss/J/grLo5Wv/v6oBf+0zb2nJVSt6fmbU8vWixnbmsiQF/
uMZJ5o1wD/Dj4gIF8g91altkLMDE5HBrUC6HqF/pPSd+h+Xp6+VHXlre5+YZ85ZK
HefD9kjWSMLzWZfvbySua7hqoEb2Z5/bSzyvtOFtf3teg/uLICvX6wiNhUjahGCQ
6gHTZz+FtzQ7iqqtO3+6loQrcx/u7cbNi8HoJkwyIKO8bxth1Rv1DWUPsHoCb/8=
=UozC
-----END PGP SIGNATURE-----

Re: [ 04/69] drm/i915: fix up ivb plane 3 pageflips

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 482 bytes --]

On Tue, 2012-06-19 at 10:23 +0200, Daniel Vetter wrote:
> On Tue, Jun 19, 2012 at 5:59 AM, Ben Hutchings <ben@decadent.org.uk>
> > So should I drop this until the second patch is upstream?
> 
> Nah, just merge it. It covers a truly impossible situation, and I've
> decided to not push Eugeni's fixup through -fixes because if that.
> Still, thanks for catching this.

OK.

Ben.

-- 
Ben Hutchings
If more than one person is responsible for a bug, no one is at fault.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]