[PATCH v6 00/14] add imx usb driver based on Greg next tree

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Richard Zhao]

The work is based on  ci13xxx rework done by Alexander Shishkin.

To let Greg pick up, I also added patches Alex queued that I depends on.
Patch #1 - #9 : It can also be found at
http://github.com/virtuoso/linux-ci.git ci

This patch series can also be found at:
https://github.com/riczhao/kernel-imx/commits/topics/usb-driver

Status:
  - this version only support host
  - usbotg controler works at host role

Changes since last version:
 - Add patches from Alex's git tree that it depends
 - Rebase to Greg's git tree
 - Move arch/arm patches to other series
 - dev_err fixes as Sascha comment
 - Add MODULE_DEVICE_TABLE

Alexander Shishkin (1):
  usb: chipidea: remove unneeded NULL check

Felipe Balbi (3):
  usb: chipidea: drop useless arch-check
  usb: chipidea: msm: add missing section annotation
  usb: chipidea: msm: add remove method

Richard Zhao (10):
  USB: Chipidea: rename struct ci13xxx_udc_driver to struct
    ci13xxx_platform_data
  USB: Chipidea: rename struct ci13xxx variables from udc to ci
  USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform
    drivers
  USB: Chipidea: add ci13xxx device id management
  usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of
    Kconfig
  usb: otg: add notify_connect/notify_disconnect callback
  USB: notify phy when root hub port connect change
  usb: chipidea: permit driver bindings pass phy pointer
  usb: otg: add basic mxs phy driver support
  usb: chipidea: add imx platform driver

 .../devicetree/bindings/usb/ci13xxx-imx.txt        |   20 +
 Documentation/devicetree/bindings/usb/mxs-phy.txt  |   13 +
 drivers/usb/chipidea/Kconfig                       |    1 +
 drivers/usb/chipidea/Makefile                      |    9 +-
 drivers/usb/chipidea/ci.h                          |   32 +-
 drivers/usb/chipidea/ci13xxx_imx.c                 |  197 ++++++
 drivers/usb/chipidea/ci13xxx_msm.c                 |   62 +-
 drivers/usb/chipidea/ci13xxx_pci.c                 |   52 +-
 drivers/usb/chipidea/core.c                        |   70 ++-
 drivers/usb/chipidea/debug.c                       |  146 ++---
 drivers/usb/chipidea/host.c                        |    3 +-
 drivers/usb/chipidea/udc.c                         |  636 ++++++++++----------
 drivers/usb/core/hub.c                             |    8 +
 drivers/usb/otg/Kconfig                            |    9 +
 drivers/usb/otg/Makefile                           |    1 +
 drivers/usb/otg/mxs-phy.c                          |  197 ++++++
 include/linux/usb/chipidea.h                       |   14 +-
 include/linux/usb/otg.h                            |   21 +
 18 files changed, 1000 insertions(+), 491 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
 create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
 create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c
 create mode 100644 drivers/usb/otg/mxs-phy.c

-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Richard Zhao]

The work is based on  ci13xxx rework done by Alexander Shishkin.

To let Greg pick up, I also added patches Alex queued that I depends on.
Patch #1 - #9 : It can also be found at
http://github.com/virtuoso/linux-ci.git ci

This patch series can also be found at:
https://github.com/riczhao/kernel-imx/commits/topics/usb-driver

Status:
  - this version only support host
  - usbotg controler works at host role

Changes since last version:
 - Add patches from Alex's git tree that it depends
 - Rebase to Greg's git tree
 - Move arch/arm patches to other series
 - dev_err fixes as Sascha comment
 - Add MODULE_DEVICE_TABLE

Alexander Shishkin (1):
  usb: chipidea: remove unneeded NULL check

Felipe Balbi (3):
  usb: chipidea: drop useless arch-check
  usb: chipidea: msm: add missing section annotation
  usb: chipidea: msm: add remove method

Richard Zhao (10):
  USB: Chipidea: rename struct ci13xxx_udc_driver to struct
    ci13xxx_platform_data
  USB: Chipidea: rename struct ci13xxx variables from udc to ci
  USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform
    drivers
  USB: Chipidea: add ci13xxx device id management
  usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of
    Kconfig
  usb: otg: add notify_connect/notify_disconnect callback
  USB: notify phy when root hub port connect change
  usb: chipidea: permit driver bindings pass phy pointer
  usb: otg: add basic mxs phy driver support
  usb: chipidea: add imx platform driver

 .../devicetree/bindings/usb/ci13xxx-imx.txt        |   20 +
 Documentation/devicetree/bindings/usb/mxs-phy.txt  |   13 +
 drivers/usb/chipidea/Kconfig                       |    1 +
 drivers/usb/chipidea/Makefile                      |    9 +-
 drivers/usb/chipidea/ci.h                          |   32 +-
 drivers/usb/chipidea/ci13xxx_imx.c                 |  197 ++++++
 drivers/usb/chipidea/ci13xxx_msm.c                 |   62 +-
 drivers/usb/chipidea/ci13xxx_pci.c                 |   52 +-
 drivers/usb/chipidea/core.c                        |   70 ++-
 drivers/usb/chipidea/debug.c                       |  146 ++---
 drivers/usb/chipidea/host.c                        |    3 +-
 drivers/usb/chipidea/udc.c                         |  636 ++++++++++----------
 drivers/usb/core/hub.c                             |    8 +
 drivers/usb/otg/Kconfig                            |    9 +
 drivers/usb/otg/Makefile                           |    1 +
 drivers/usb/otg/mxs-phy.c                          |  197 ++++++
 include/linux/usb/chipidea.h                       |   14 +-
 include/linux/usb/otg.h                            |   21 +
 18 files changed, 1000 insertions(+), 491 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
 create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
 create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c
 create mode 100644 drivers/usb/otg/mxs-phy.c

-- 
1.7.9.5

[PATCH v6 01/14] usb: chipidea: remove unneeded NULL check

[Richard Zhao]

From: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>

As reported by Dan Carpenter, there is a NULL check in udc_start() that
follows a dereference of the pointer that's being checked. However, at
that point udc pointer shouldn't ever be NULL and if it is, the dereference
should cause an oops.

Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Reported-by: Dan Carpenter <dan.carpenter-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
---
 drivers/usb/chipidea/udc.c |    3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 51f9694..cdb9212 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1647,9 +1647,6 @@ static int udc_start(struct ci13xxx *udc)
 	struct device *dev = udc->dev;
 	int retval = 0;
 
-	if (!udc)
-		return -EINVAL;

[PATCH v6 01/14] usb: chipidea: remove unneeded NULL check

[Richard Zhao]

From: Alexander Shishkin <alexander.shishkin@linux.intel.com>

As reported by Dan Carpenter, there is a NULL check in udc_start() that
follows a dereference of the pointer that's being checked. However, at
that point udc pointer shouldn't ever be NULL and if it is, the dereference
should cause an oops.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 drivers/usb/chipidea/udc.c |    3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 51f9694..cdb9212 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1647,9 +1647,6 @@ static int udc_start(struct ci13xxx *udc)
 	struct device *dev = udc->dev;
 	int retval = 0;
 
-	if (!udc)
-		return -EINVAL;
-
 	spin_lock_init(&udc->lock);
 
 	udc->gadget.ops          = &usb_gadget_ops;
-- 
1.7.9.5

[PATCH v6 02/14] usb: chipidea: drop useless arch-check

[Richard Zhao]

From: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>

msm glue layer compiles on all arches just
fine. Let's drop the unnecessary ARCH check
so we have easier compile tests.

Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/usb/chipidea/Makefile |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index cc34937..b69900a 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -5,10 +5,12 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC)	+= udc.o
 ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST)	+= host.o
 ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG)	+= debug.o
 
+# Glue/Bridge layers go here
+
+obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_msm.o
+
+# PCI doesn't provide stubs, need to check
 ifneq ($(CONFIG_PCI),)
 	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_pci.o
 endif
 
-ifneq ($(CONFIG_ARCH_MSM),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_msm.o
-endif
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 02/14] usb: chipidea: drop useless arch-check

[Richard Zhao]

From: Felipe Balbi <balbi@ti.com>

msm glue layer compiles on all arches just
fine. Let's drop the unnecessary ARCH check
so we have easier compile tests.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/Makefile |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index cc34937..b69900a 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -5,10 +5,12 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC)	+= udc.o
 ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST)	+= host.o
 ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG)	+= debug.o
 
+# Glue/Bridge layers go here
+
+obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_msm.o
+
+# PCI doesn't provide stubs, need to check
 ifneq ($(CONFIG_PCI),)
 	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_pci.o
 endif
 
-ifneq ($(CONFIG_ARCH_MSM),)
-	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_msm.o
-endif
-- 
1.7.9.5

[PATCH v6 03/14] usb: chipidea: msm: add missing section annotation

[Richard Zhao]

From: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>

no functional changes, it will just free up some
code if we don't have hotplug.

Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/usb/chipidea/ci13xxx_msm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 958069e..8d438b8 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -55,7 +55,7 @@ static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = {
 	.notify_event		= ci13xxx_msm_notify_event,
 };
 
-static int ci13xxx_msm_probe(struct platform_device *pdev)
+static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci;
 	int ret;
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 03/14] usb: chipidea: msm: add missing section annotation

[Richard Zhao]

From: Felipe Balbi <balbi@ti.com>

no functional changes, it will just free up some
code if we don't have hotplug.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/ci13xxx_msm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 958069e..8d438b8 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -55,7 +55,7 @@ static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = {
 	.notify_event		= ci13xxx_msm_notify_event,
 };
 
-static int ci13xxx_msm_probe(struct platform_device *pdev)
+static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci;
 	int ret;
-- 
1.7.9.5

[PATCH v6 04/14] usb: chipidea: msm: add remove method

[Richard Zhao]

From: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>

allow this driver to be removed too.

Signed-off-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/usb/chipidea/ci13xxx_msm.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 8d438b8..68512d4 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -84,6 +84,8 @@ static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 	if (ret)
 		goto put_platform;
 
+	platform_set_drvdata(pdev, plat_ci);
+
 	pm_runtime_no_callbacks(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
@@ -95,16 +97,22 @@ put_platform:
 	return ret;
 }
 
+static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
+{
+	struct platform_device *plat_ci = platform_get_drvdata(pdev);
+
+	platform_device_unregister(plat_ci);
+
+	return 0;
+}
+
 static struct platform_driver ci13xxx_msm_driver = {
 	.probe = ci13xxx_msm_probe,
+	.remove = __devexit_p(ci13xxx_msm_remove),
 	.driver = { .name = "msm_hsusb", },
 };
-MODULE_ALIAS("platform:msm_hsusb");
 
-static int __init ci13xxx_msm_init(void)
-{
-	return platform_driver_register(&ci13xxx_msm_driver);
-}
-module_init(ci13xxx_msm_init);
+module_platform_driver(ci13xxx_msm_driver);
 
+MODULE_ALIAS("platform:msm_hsusb");
 MODULE_LICENSE("GPL v2");
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 04/14] usb: chipidea: msm: add remove method

[Richard Zhao]

From: Felipe Balbi <balbi@ti.com>

allow this driver to be removed too.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/ci13xxx_msm.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 8d438b8..68512d4 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -84,6 +84,8 @@ static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 	if (ret)
 		goto put_platform;
 
+	platform_set_drvdata(pdev, plat_ci);
+
 	pm_runtime_no_callbacks(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
@@ -95,16 +97,22 @@ put_platform:
 	return ret;
 }
 
+static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
+{
+	struct platform_device *plat_ci = platform_get_drvdata(pdev);
+
+	platform_device_unregister(plat_ci);
+
+	return 0;
+}
+
 static struct platform_driver ci13xxx_msm_driver = {
 	.probe = ci13xxx_msm_probe,
+	.remove = __devexit_p(ci13xxx_msm_remove),
 	.driver = { .name = "msm_hsusb", },
 };
-MODULE_ALIAS("platform:msm_hsusb");
 
-static int __init ci13xxx_msm_init(void)
-{
-	return platform_driver_register(&ci13xxx_msm_driver);
-}
-module_init(ci13xxx_msm_init);
+module_platform_driver(ci13xxx_msm_driver);
 
+MODULE_ALIAS("platform:msm_hsusb");
 MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

[PATCH v6 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data

[Richard Zhao]

This patch rename struct ci13xxx_udc_driver and var with the type.

ci13xxx_platform_data reflect it's passed from platfrom driver.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/usb/chipidea/ci.h          |    4 ++--
 drivers/usb/chipidea/ci13xxx_msm.c |    6 +++---
 drivers/usb/chipidea/ci13xxx_pci.c |   20 ++++++++++----------
 drivers/usb/chipidea/core.c        |   12 ++++++------
 drivers/usb/chipidea/host.c        |    2 +-
 drivers/usb/chipidea/udc.c         |   24 ++++++++++++------------
 include/linux/usb/chipidea.h       |    2 +-
 7 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 50911f8..0b09330 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -125,7 +125,7 @@ struct hw_bank {
  * @remote_wakeup: host-enabled remote wakeup
  * @suspended: suspended by host
  * @test_mode: the selected test mode
- * @udc_driver: platform specific information supplied by parent device
+ * @platdata: platform specific information supplied by parent device
  * @vbus_active: is VBUS active
  * @transceiver: pointer to USB PHY, if any
  * @hcd: pointer to usb_hcd for ehci host driver
@@ -158,7 +158,7 @@ struct ci13xxx {
 	u8				suspended;
 	u8				test_mode;
 
-	struct ci13xxx_udc_driver	*udc_driver;
+	struct ci13xxx_platform_data	*platdata;
 	int				vbus_active;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 68512d4..21a7c2e 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -45,7 +45,7 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
 	}
 }
 
-static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = {
+static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
 	.name			= "ci13xxx_msm",
 	.flags			= CI13XXX_REGS_SHARED |
 				  CI13XXX_REQUIRE_TRANSCEIVER |
@@ -75,8 +75,8 @@ static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 		goto put_platform;
 	}
 
-	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_udc_driver,
-				       sizeof(ci13xxx_msm_udc_driver));
+	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata,
+				       sizeof(ci13xxx_msm_platdata));
 	if (ret)
 		goto put_platform;
 
diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
index e3dab27..cdcac3a 100644
--- a/drivers/usb/chipidea/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci13xxx_pci.c
@@ -23,17 +23,17 @@
 /******************************************************************************
  * PCI block
  *****************************************************************************/
-struct ci13xxx_udc_driver pci_driver = {
+struct ci13xxx_platform_data pci_platdata = {
 	.name		= UDC_DRIVER_NAME,
 	.capoffset	= DEF_CAPOFFSET,
 };
 
-struct ci13xxx_udc_driver langwell_pci_driver = {
+struct ci13xxx_platform_data langwell_pci_platdata = {
 	.name		= UDC_DRIVER_NAME,
 	.capoffset	= 0,
 };
 
-struct ci13xxx_udc_driver penwell_pci_driver = {
+struct ci13xxx_platform_data penwell_pci_platdata = {
 	.name		= UDC_DRIVER_NAME,
 	.capoffset	= 0,
 	.power_budget	= 200,
@@ -51,12 +51,12 @@ struct ci13xxx_udc_driver penwell_pci_driver = {
 static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 				       const struct pci_device_id *id)
 {
-	struct ci13xxx_udc_driver *driver = (void *)id->driver_data;
+	struct ci13xxx_platform_data *platdata = (void *)id->driver_data;
 	struct platform_device *plat_ci;
 	struct resource res[3];
 	int retval = 0, nres = 2;
 
-	if (!driver) {
+	if (!platdata) {
 		dev_err(&pdev->dev, "device doesn't provide driver data\n");
 		return -ENODEV;
 	}
@@ -95,7 +95,7 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 		goto put_platform;
 	}
 
-	retval = platform_device_add_data(plat_ci, driver, sizeof(*driver));
+	retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata));
 	if (retval)
 		goto put_platform;
 
@@ -147,19 +147,19 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
 static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
 	{
 		PCI_DEVICE(0x153F, 0x1004),
-		.driver_data = (kernel_ulong_t)&pci_driver,
+		.driver_data = (kernel_ulong_t)&pci_platdata,
 	},
 	{
 		PCI_DEVICE(0x153F, 0x1006),
-		.driver_data = (kernel_ulong_t)&pci_driver,
+		.driver_data = (kernel_ulong_t)&pci_platdata,
 	},
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811),
-		.driver_data = (kernel_ulong_t)&langwell_pci_driver,
+		.driver_data = (kernel_ulong_t)&langwell_pci_platdata,
 	},
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829),
-		.driver_data = (kernel_ulong_t)&penwell_pci_driver,
+		.driver_data = (kernel_ulong_t)&penwell_pci_platdata,
 	},
 	{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 15e03b3..9a883bd 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -179,7 +179,7 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
 	ci->hw_bank.abs = base;
 
 	ci->hw_bank.cap = ci->hw_bank.abs;
-	ci->hw_bank.cap += ci->udc_driver->capoffset;
+	ci->hw_bank.cap += ci->platdata->capoffset;
 	ci->hw_bank.op = ci->hw_bank.cap + ioread8(ci->hw_bank.cap);
 
 	hw_alloc_regmap(ci, false);
@@ -227,11 +227,11 @@ int hw_device_reset(struct ci13xxx *ci, u32 mode)
 		udelay(10);		/* not RTOS friendly */
 
 
-	if (ci->udc_driver->notify_event)
-		ci->udc_driver->notify_event(ci,
+	if (ci->platdata->notify_event)
+		ci->platdata->notify_event(ci,
 			CI13XXX_CONTROLLER_RESET_EVENT);
 
-	if (ci->udc_driver->flags & CI13XXX_DISABLE_STREAMING)
+	if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
 		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
 
 	/* USBMODE should be configured step by step */
@@ -364,7 +364,7 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 	}
 
 	ci->dev = dev;
-	ci->udc_driver = dev->platform_data;
+	ci->platdata = dev->platform_data;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
@@ -419,7 +419,7 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, ci);
-	ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->udc_driver->name,
+	ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name,
 			  ci);
 	if (ret)
 		goto stop;
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 9eacd21..4a4fdb8 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -116,7 +116,7 @@ static int host_start(struct ci13xxx *ci)
 	hcd->regs = ci->hw_bank.abs;
 	hcd->has_tt = 1;
 
-	hcd->power_budget = ci->udc_driver->power_budget;
+	hcd->power_budget = ci->platdata->power_budget;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index cdb9212..68584bb 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1362,7 +1362,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 	unsigned long flags;
 	int gadget_ready = 0;
 
-	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS))
+	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
 		return -EOPNOTSUPP;
 
 	spin_lock_irqsave(&udc->lock, flags);
@@ -1378,8 +1378,8 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 			hw_device_state(udc, udc->ep0out->qh.dma);
 		} else {
 			hw_device_state(udc, 0);
-			if (udc->udc_driver->notify_event)
-				udc->udc_driver->notify_event(udc,
+			if (udc->platdata->notify_event)
+				udc->platdata->notify_event(udc,
 				CI13XXX_CONTROLLER_STOPPED_EVENT);
 			_gadget_stop_activity(&udc->gadget);
 			pm_runtime_put_sync(&_gadget->dev);
@@ -1514,9 +1514,9 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 
 	udc->driver = driver;
 	pm_runtime_get_sync(&udc->gadget.dev);
-	if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
+	if (udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
 		if (udc->vbus_active) {
-			if (udc->udc_driver->flags & CI13XXX_REGS_SHARED)
+			if (udc->platdata->flags & CI13XXX_REGS_SHARED)
 				hw_device_reset(udc, USBMODE_CM_DC);
 		} else {
 			pm_runtime_put_sync(&udc->gadget.dev);
@@ -1544,11 +1544,11 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
 
 	spin_lock_irqsave(&udc->lock, flags);
 
-	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) ||
+	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
 			udc->vbus_active) {
 		hw_device_state(udc, 0);
-		if (udc->udc_driver->notify_event)
-			udc->udc_driver->notify_event(udc,
+		if (udc->platdata->notify_event)
+			udc->platdata->notify_event(udc,
 			CI13XXX_CONTROLLER_STOPPED_EVENT);
 		udc->driver = NULL;
 		spin_unlock_irqrestore(&udc->lock, flags);
@@ -1581,7 +1581,7 @@ static irqreturn_t udc_irq(struct ci13xxx *udc)
 
 	spin_lock(&udc->lock);
 
-	if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
+	if (udc->platdata->flags & CI13XXX_REGS_SHARED) {
 		if (hw_read(udc, OP_USBMODE, USBMODE_CM) !=
 				USBMODE_CM_DC) {
 			spin_unlock(&udc->lock);
@@ -1653,7 +1653,7 @@ static int udc_start(struct ci13xxx *udc)
 	udc->gadget.speed        = USB_SPEED_UNKNOWN;
 	udc->gadget.max_speed    = USB_SPEED_HIGH;
 	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = udc->udc_driver->name;
+	udc->gadget.name         = udc->platdata->name;
 
 	INIT_LIST_HEAD(&udc->gadget.ep_list);
 
@@ -1686,14 +1686,14 @@ static int udc_start(struct ci13xxx *udc)
 
 	udc->transceiver = usb_get_transceiver();
 
-	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+	if (udc->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (udc->transceiver == NULL) {
 			retval = -ENODEV;
 			goto free_pools;
 		}
 	}
 
-	if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) {
+	if (!(udc->platdata->flags & CI13XXX_REGS_SHARED)) {
 		retval = hw_device_reset(udc, USBMODE_CM_DC);
 		if (retval)
 			goto put_transceiver;
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index edb90d6..d4cf9706 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -6,7 +6,7 @@
 #define __LINUX_USB_CHIPIDEA_H
 
 struct ci13xxx;
-struct ci13xxx_udc_driver {
+struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 05/14] USB: Chipidea: rename struct ci13xxx_udc_driver to struct ci13xxx_platform_data

[Richard Zhao]

This patch rename struct ci13xxx_udc_driver and var with the type.

ci13xxx_platform_data reflect it's passed from platfrom driver.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/ci.h          |    4 ++--
 drivers/usb/chipidea/ci13xxx_msm.c |    6 +++---
 drivers/usb/chipidea/ci13xxx_pci.c |   20 ++++++++++----------
 drivers/usb/chipidea/core.c        |   12 ++++++------
 drivers/usb/chipidea/host.c        |    2 +-
 drivers/usb/chipidea/udc.c         |   24 ++++++++++++------------
 include/linux/usb/chipidea.h       |    2 +-
 7 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 50911f8..0b09330 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -125,7 +125,7 @@ struct hw_bank {
  * @remote_wakeup: host-enabled remote wakeup
  * @suspended: suspended by host
  * @test_mode: the selected test mode
- * @udc_driver: platform specific information supplied by parent device
+ * @platdata: platform specific information supplied by parent device
  * @vbus_active: is VBUS active
  * @transceiver: pointer to USB PHY, if any
  * @hcd: pointer to usb_hcd for ehci host driver
@@ -158,7 +158,7 @@ struct ci13xxx {
 	u8				suspended;
 	u8				test_mode;
 
-	struct ci13xxx_udc_driver	*udc_driver;
+	struct ci13xxx_platform_data	*platdata;
 	int				vbus_active;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 68512d4..21a7c2e 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -45,7 +45,7 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
 	}
 }
 
-static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = {
+static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
 	.name			= "ci13xxx_msm",
 	.flags			= CI13XXX_REGS_SHARED |
 				  CI13XXX_REQUIRE_TRANSCEIVER |
@@ -75,8 +75,8 @@ static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 		goto put_platform;
 	}
 
-	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_udc_driver,
-				       sizeof(ci13xxx_msm_udc_driver));
+	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata,
+				       sizeof(ci13xxx_msm_platdata));
 	if (ret)
 		goto put_platform;
 
diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
index e3dab27..cdcac3a 100644
--- a/drivers/usb/chipidea/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci13xxx_pci.c
@@ -23,17 +23,17 @@
 /******************************************************************************
  * PCI block
  *****************************************************************************/
-struct ci13xxx_udc_driver pci_driver = {
+struct ci13xxx_platform_data pci_platdata = {
 	.name		= UDC_DRIVER_NAME,
 	.capoffset	= DEF_CAPOFFSET,
 };
 
-struct ci13xxx_udc_driver langwell_pci_driver = {
+struct ci13xxx_platform_data langwell_pci_platdata = {
 	.name		= UDC_DRIVER_NAME,
 	.capoffset	= 0,
 };
 
-struct ci13xxx_udc_driver penwell_pci_driver = {
+struct ci13xxx_platform_data penwell_pci_platdata = {
 	.name		= UDC_DRIVER_NAME,
 	.capoffset	= 0,
 	.power_budget	= 200,
@@ -51,12 +51,12 @@ struct ci13xxx_udc_driver penwell_pci_driver = {
 static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 				       const struct pci_device_id *id)
 {
-	struct ci13xxx_udc_driver *driver = (void *)id->driver_data;
+	struct ci13xxx_platform_data *platdata = (void *)id->driver_data;
 	struct platform_device *plat_ci;
 	struct resource res[3];
 	int retval = 0, nres = 2;
 
-	if (!driver) {
+	if (!platdata) {
 		dev_err(&pdev->dev, "device doesn't provide driver data\n");
 		return -ENODEV;
 	}
@@ -95,7 +95,7 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 		goto put_platform;
 	}
 
-	retval = platform_device_add_data(plat_ci, driver, sizeof(*driver));
+	retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata));
 	if (retval)
 		goto put_platform;
 
@@ -147,19 +147,19 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
 static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
 	{
 		PCI_DEVICE(0x153F, 0x1004),
-		.driver_data = (kernel_ulong_t)&pci_driver,
+		.driver_data = (kernel_ulong_t)&pci_platdata,
 	},
 	{
 		PCI_DEVICE(0x153F, 0x1006),
-		.driver_data = (kernel_ulong_t)&pci_driver,
+		.driver_data = (kernel_ulong_t)&pci_platdata,
 	},
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811),
-		.driver_data = (kernel_ulong_t)&langwell_pci_driver,
+		.driver_data = (kernel_ulong_t)&langwell_pci_platdata,
 	},
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829),
-		.driver_data = (kernel_ulong_t)&penwell_pci_driver,
+		.driver_data = (kernel_ulong_t)&penwell_pci_platdata,
 	},
 	{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 15e03b3..9a883bd 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -179,7 +179,7 @@ static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
 	ci->hw_bank.abs = base;
 
 	ci->hw_bank.cap = ci->hw_bank.abs;
-	ci->hw_bank.cap += ci->udc_driver->capoffset;
+	ci->hw_bank.cap += ci->platdata->capoffset;
 	ci->hw_bank.op = ci->hw_bank.cap + ioread8(ci->hw_bank.cap);
 
 	hw_alloc_regmap(ci, false);
@@ -227,11 +227,11 @@ int hw_device_reset(struct ci13xxx *ci, u32 mode)
 		udelay(10);		/* not RTOS friendly */
 
 
-	if (ci->udc_driver->notify_event)
-		ci->udc_driver->notify_event(ci,
+	if (ci->platdata->notify_event)
+		ci->platdata->notify_event(ci,
 			CI13XXX_CONTROLLER_RESET_EVENT);
 
-	if (ci->udc_driver->flags & CI13XXX_DISABLE_STREAMING)
+	if (ci->platdata->flags & CI13XXX_DISABLE_STREAMING)
 		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
 
 	/* USBMODE should be configured step by step */
@@ -364,7 +364,7 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 	}
 
 	ci->dev = dev;
-	ci->udc_driver = dev->platform_data;
+	ci->platdata = dev->platform_data;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
@@ -419,7 +419,7 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, ci);
-	ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->udc_driver->name,
+	ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name,
 			  ci);
 	if (ret)
 		goto stop;
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 9eacd21..4a4fdb8 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -116,7 +116,7 @@ static int host_start(struct ci13xxx *ci)
 	hcd->regs = ci->hw_bank.abs;
 	hcd->has_tt = 1;
 
-	hcd->power_budget = ci->udc_driver->power_budget;
+	hcd->power_budget = ci->platdata->power_budget;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index cdb9212..68584bb 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1362,7 +1362,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 	unsigned long flags;
 	int gadget_ready = 0;
 
-	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS))
+	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
 		return -EOPNOTSUPP;
 
 	spin_lock_irqsave(&udc->lock, flags);
@@ -1378,8 +1378,8 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 			hw_device_state(udc, udc->ep0out->qh.dma);
 		} else {
 			hw_device_state(udc, 0);
-			if (udc->udc_driver->notify_event)
-				udc->udc_driver->notify_event(udc,
+			if (udc->platdata->notify_event)
+				udc->platdata->notify_event(udc,
 				CI13XXX_CONTROLLER_STOPPED_EVENT);
 			_gadget_stop_activity(&udc->gadget);
 			pm_runtime_put_sync(&_gadget->dev);
@@ -1514,9 +1514,9 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 
 	udc->driver = driver;
 	pm_runtime_get_sync(&udc->gadget.dev);
-	if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
+	if (udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
 		if (udc->vbus_active) {
-			if (udc->udc_driver->flags & CI13XXX_REGS_SHARED)
+			if (udc->platdata->flags & CI13XXX_REGS_SHARED)
 				hw_device_reset(udc, USBMODE_CM_DC);
 		} else {
 			pm_runtime_put_sync(&udc->gadget.dev);
@@ -1544,11 +1544,11 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
 
 	spin_lock_irqsave(&udc->lock, flags);
 
-	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) ||
+	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
 			udc->vbus_active) {
 		hw_device_state(udc, 0);
-		if (udc->udc_driver->notify_event)
-			udc->udc_driver->notify_event(udc,
+		if (udc->platdata->notify_event)
+			udc->platdata->notify_event(udc,
 			CI13XXX_CONTROLLER_STOPPED_EVENT);
 		udc->driver = NULL;
 		spin_unlock_irqrestore(&udc->lock, flags);
@@ -1581,7 +1581,7 @@ static irqreturn_t udc_irq(struct ci13xxx *udc)
 
 	spin_lock(&udc->lock);
 
-	if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
+	if (udc->platdata->flags & CI13XXX_REGS_SHARED) {
 		if (hw_read(udc, OP_USBMODE, USBMODE_CM) !=
 				USBMODE_CM_DC) {
 			spin_unlock(&udc->lock);
@@ -1653,7 +1653,7 @@ static int udc_start(struct ci13xxx *udc)
 	udc->gadget.speed        = USB_SPEED_UNKNOWN;
 	udc->gadget.max_speed    = USB_SPEED_HIGH;
 	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = udc->udc_driver->name;
+	udc->gadget.name         = udc->platdata->name;
 
 	INIT_LIST_HEAD(&udc->gadget.ep_list);
 
@@ -1686,14 +1686,14 @@ static int udc_start(struct ci13xxx *udc)
 
 	udc->transceiver = usb_get_transceiver();
 
-	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+	if (udc->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (udc->transceiver == NULL) {
 			retval = -ENODEV;
 			goto free_pools;
 		}
 	}
 
-	if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) {
+	if (!(udc->platdata->flags & CI13XXX_REGS_SHARED)) {
 		retval = hw_device_reset(udc, USBMODE_CM_DC);
 		if (retval)
 			goto put_transceiver;
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index edb90d6..d4cf9706 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -6,7 +6,7 @@
 #define __LINUX_USB_CHIPIDEA_H
 
 struct ci13xxx;
-struct ci13xxx_udc_driver {
+struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
-- 
1.7.9.5

[PATCH v6 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci

[Richard Zhao]

struct ci13xxx represent the controller, which may be device or host,
so name its variables as ci.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/usb/chipidea/ci.h          |   26 +-
 drivers/usb/chipidea/ci13xxx_msm.c |   12 +-
 drivers/usb/chipidea/debug.c       |  146 ++++-----
 drivers/usb/chipidea/udc.c         |  630 ++++++++++++++++++------------------
 include/linux/usb/chipidea.h       |    2 +-
 5 files changed, 408 insertions(+), 408 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 0b09330..9655e35 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -36,7 +36,7 @@
  * @name: string description of the endpoint
  * @qh: queue head for this endpoint
  * @wedge: is the endpoint wedged
- * @udc: pointer to the controller
+ * @ci: pointer to the controller
  * @lock: pointer to controller's spinlock
  * @td_pool: pointer to controller's TD pool
  */
@@ -54,7 +54,7 @@ struct ci13xxx_ep {
 	int					wedge;
 
 	/* global resources */
-	struct ci13xxx				*udc;
+	struct ci13xxx				*ci;
 	spinlock_t				*lock;
 	struct dma_pool				*td_pool;
 };
@@ -250,9 +250,9 @@ static inline int ffs_nr(u32 x)
  *
  * This function returns register contents
  */
-static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask)
+static inline u32 hw_read(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask)
 {
-	return ioread32(udc->hw_bank.regmap[reg]) & mask;
+	return ioread32(ci->hw_bank.regmap[reg]) & mask;
 }
 
 /**
@@ -261,14 +261,14 @@ static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask)
  * @mask: bitfield mask
  * @data: new value
  */
-static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline void hw_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
 			    u32 mask, u32 data)
 {
 	if (~mask)
-		data = (ioread32(udc->hw_bank.regmap[reg]) & ~mask)
+		data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
 			| (data & mask);
 
-	iowrite32(data, udc->hw_bank.regmap[reg]);
+	iowrite32(data, ci->hw_bank.regmap[reg]);
 }
 
 /**
@@ -278,12 +278,12 @@ static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
  *
  * This function returns register contents
  */
-static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline u32 hw_test_and_clear(struct ci13xxx *ci, enum ci13xxx_regs reg,
 				    u32 mask)
 {
-	u32 val = ioread32(udc->hw_bank.regmap[reg]) & mask;
+	u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
 
-	iowrite32(val, udc->hw_bank.regmap[reg]);
+	iowrite32(val, ci->hw_bank.regmap[reg]);
 	return val;
 }
 
@@ -295,12 +295,12 @@ static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg,
  *
  * This function returns register contents
  */
-static inline u32 hw_test_and_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline u32 hw_test_and_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
 				    u32 mask, u32 data)
 {
-	u32 val = hw_read(udc, reg, ~0);
+	u32 val = hw_read(ci, reg, ~0);
 
-	hw_write(udc, reg, mask, data);
+	hw_write(ci, reg, mask, data);
 	return (val & mask) >> ffs_nr(mask);
 }
 
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 21a7c2e..a7dd9f1 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -15,11 +15,11 @@
 
 #include "ci.h"
 
-#define MSM_USB_BASE	(udc->hw_bank.abs)
+#define MSM_USB_BASE	(ci->hw_bank.abs)
 
-static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
+static void ci13xxx_msm_notify_event(struct ci13xxx *ci, unsigned event)
 {
-	struct device *dev = udc->gadget.dev.parent;
+	struct device *dev = ci->gadget.dev.parent;
 	int val;
 
 	switch (event) {
@@ -34,13 +34,13 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
 		 * Put the transceiver in non-driving mode. Otherwise host
 		 * may not detect soft-disconnection.
 		 */
-		val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL);
+		val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
 		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
 		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-		usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
+		usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
 		break;
 	default:
-		dev_dbg(dev, "unknown ci13xxx_udc event\n");
+		dev_dbg(dev, "unknown ci13xxx event\n");
 		break;
 	}
 }
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index c4b3e15..c6f50a2 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -68,15 +68,15 @@ void dbg_interrupt(u32 intmask)
  *
  * This function returns number of registers read
  */
-static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size)
+static size_t hw_register_read(struct ci13xxx *ci, u32 *buf, size_t size)
 {
 	unsigned i;
 
-	if (size > udc->hw_bank.size)
-		size = udc->hw_bank.size;
+	if (size > ci->hw_bank.size)
+		size = ci->hw_bank.size;
 
 	for (i = 0; i < size; i++)
-		buf[i] = hw_read(udc, i * sizeof(u32), ~0);
+		buf[i] = hw_read(ci, i * sizeof(u32), ~0);
 
 	return size;
 }
@@ -88,18 +88,18 @@ static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size)
  *
  * This function returns an error code
  */
-static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data)
+static int hw_register_write(struct ci13xxx *ci, u16 addr, u32 data)
 {
 	/* align */
 	addr /= sizeof(u32);
 
-	if (addr >= udc->hw_bank.size)
+	if (addr >= ci->hw_bank.size)
 		return -EINVAL;
 
 	/* align */
 	addr *= sizeof(u32);
 
-	hw_write(udc, addr, ~0, data);
+	hw_write(ci, addr, ~0, data);
 	return 0;
 }
 
@@ -110,13 +110,13 @@ static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data)
  *
  * This function returns an error code
  */
-static int hw_intr_clear(struct ci13xxx *udc, int n)
+static int hw_intr_clear(struct ci13xxx *ci, int n)
 {
 	if (n >= REG_BITS)
 		return -EINVAL;
 
-	hw_write(udc, OP_USBINTR, BIT(n), 0);
-	hw_write(udc, OP_USBSTS,  BIT(n), BIT(n));
+	hw_write(ci, OP_USBINTR, BIT(n), 0);
+	hw_write(ci, OP_USBSTS,  BIT(n), BIT(n));
 	return 0;
 }
 
@@ -127,15 +127,15 @@ static int hw_intr_clear(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_intr_force(struct ci13xxx *udc, int n)
+static int hw_intr_force(struct ci13xxx *ci, int n)
 {
 	if (n >= REG_BITS)
 		return -EINVAL;
 
-	hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
-	hw_write(udc, OP_USBINTR,  BIT(n), BIT(n));
-	hw_write(udc, OP_USBSTS,   BIT(n), BIT(n));
-	hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, 0);
+	hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
+	hw_write(ci, OP_USBINTR,  BIT(n), BIT(n));
+	hw_write(ci, OP_USBSTS,   BIT(n), BIT(n));
+	hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, 0);
 	return 0;
 }
 
@@ -147,12 +147,12 @@ static int hw_intr_force(struct ci13xxx *udc, int n)
 static ssize_t show_device(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	struct usb_gadget *gadget = &udc->gadget;
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
+	struct usb_gadget *gadget = &ci->gadget;
 	int n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
@@ -188,8 +188,8 @@ static DEVICE_ATTR(device, S_IRUSR, show_device, NULL);
 static ssize_t show_driver(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	struct usb_gadget_driver *driver = udc->driver;
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
+	struct usb_gadget_driver *driver = ci->driver;
 	int n = 0;
 
 	if (attr == NULL || buf == NULL) {
@@ -412,22 +412,22 @@ static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events);
 static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	u32 intr;
 	unsigned i, j, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 
 	/*n += scnprintf(buf + n, PAGE_SIZE - n,
-		       "status = %08x\n", hw_read_intr_status(udc));
+		       "status = %08x\n", hw_read_intr_status(ci));
 	n += scnprintf(buf + n, PAGE_SIZE - n,
-	"enable = %08x\n", hw_read_intr_enable(udc));*/
+	"enable = %08x\n", hw_read_intr_enable(ci));*/
 
 	n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n",
 		       isr_statistics.test);
@@ -471,7 +471,7 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 			n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
 	}
 
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
@@ -485,31 +485,31 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 static ssize_t store_inters(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned en, bit;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "EINVAL\n");
+		dev_err(ci->dev, "EINVAL\n");
 		goto done;
 	}
 
 	if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) {
-		dev_err(udc->dev, "<1|0> <bit>: enable|disable interrupt\n");
+		dev_err(ci->dev, "<1|0> <bit>: enable|disable interrupt\n");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 	if (en) {
-		if (hw_intr_force(udc, bit))
+		if (hw_intr_force(ci, bit))
 			dev_err(dev, "invalid bit number\n");
 		else
 			isr_statistics.test++;
 	} else {
-		if (hw_intr_clear(udc, bit))
+		if (hw_intr_clear(ci, bit))
 			dev_err(dev, "invalid bit number\n");
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -524,18 +524,18 @@ static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters);
 static ssize_t show_port_test(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned mode;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "EINVAL\n");
+		dev_err(ci->dev, "EINVAL\n");
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	mode = hw_port_test_get(udc);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	mode = hw_port_test_get(ci);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode);
 }
@@ -549,24 +549,24 @@ static ssize_t store_port_test(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned mode;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		goto done;
 	}
 
 	if (sscanf(buf, "%u", &mode) != 1) {
-		dev_err(udc->dev, "<mode>: set port test mode");
+		dev_err(ci->dev, "<mode>: set port test mode");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (hw_port_test_set(udc, mode))
-		dev_err(udc->dev, "invalid mode\n");
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (hw_port_test_set(ci, mode))
+		dev_err(ci->dev, "invalid mode\n");
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -582,20 +582,20 @@ static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR,
 static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned i, j, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	for (i = 0; i < udc->hw_ep_max/2; i++) {
-		struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i];
+	spin_lock_irqsave(&ci->lock, flags);
+	for (i = 0; i < ci->hw_ep_max/2; i++) {
+		struct ci13xxx_ep *mEpRx = &ci->ci13xxx_ep[i];
 		struct ci13xxx_ep *mEpTx =
-			&udc->ci13xxx_ep[i + udc->hw_ep_max/2];
+			&ci->ci13xxx_ep[i + ci->hw_ep_max/2];
 		n += scnprintf(buf + n, PAGE_SIZE - n,
 			       "EP=%02i: RX=%08X TX=%08X\n",
 			       i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
@@ -606,7 +606,7 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
 				       *((u32 *)mEpTx->qh.ptr + j));
 		}
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
@@ -621,25 +621,25 @@ static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL);
 static ssize_t show_registers(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	u32 *dump;
 	unsigned i, k, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
 	dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL);
 	if (!dump) {
-		dev_err(udc->dev, "%s: out of memory\n", __func__);
+		dev_err(ci->dev, "%s: out of memory\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	k = hw_register_read(udc, dump, DUMP_ENTRIES);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	k = hw_register_read(ci, dump, DUMP_ENTRIES);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	for (i = 0; i < k; i++) {
 		n += scnprintf(buf + n, PAGE_SIZE - n,
@@ -660,24 +660,24 @@ static ssize_t store_registers(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long addr, data, flags;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		goto done;
 	}
 
 	if (sscanf(buf, "%li %li", &addr, &data) != 2) {
-		dev_err(udc->dev,
+		dev_err(ci->dev,
 			"<addr> <data>: write data to register address\n");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (hw_register_write(udc, addr, data))
-		dev_err(udc->dev, "invalid address range\n");
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (hw_register_write(ci, addr, data))
+		dev_err(ci->dev, "invalid address range\n");
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -693,34 +693,34 @@ static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR,
 static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	struct list_head   *ptr = NULL;
 	struct ci13xxx_req *req = NULL;
 	unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	for (i = 0; i < udc->hw_ep_max; i++)
-		list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue)
+	spin_lock_irqsave(&ci->lock, flags);
+	for (i = 0; i < ci->hw_ep_max; i++)
+		list_for_each(ptr, &ci->ci13xxx_ep[i].qh.queue)
 		{
 			req = list_entry(ptr, struct ci13xxx_req, queue);
 
 			n += scnprintf(buf + n, PAGE_SIZE - n,
 					"EP=%02i: TD=%08X %s\n",
-					i % udc->hw_ep_max/2, (u32)req->dma,
-					((i < udc->hw_ep_max/2) ? "RX" : "TX"));
+					i % ci->hw_ep_max/2, (u32)req->dma,
+					((i < ci->hw_ep_max/2) ? "RX" : "TX"));
 
 			for (j = 0; j < qSize; j++)
 				n += scnprintf(buf + n, PAGE_SIZE - n,
 						" %04X:    %08X\n", j,
 						*((u32 *)req->ptr + j));
 		}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 68584bb..ca9b387 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1,5 +1,5 @@
 /*
- * udc.c - ChipIdea UDC driver
+ * ci.c - ChipIdea UDC driver
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  *
@@ -66,11 +66,11 @@ static inline int hw_ep_bit(int num, int dir)
 	return num + (dir ? 16 : 0);
 }
 
-static inline int ep_to_bit(struct ci13xxx *udc, int n)
+static inline int ep_to_bit(struct ci13xxx *ci, int n)
 {
-	int fill = 16 - udc->hw_ep_max / 2;
+	int fill = 16 - ci->hw_ep_max / 2;
 
-	if (n >= udc->hw_ep_max / 2)
+	if (n >= ci->hw_ep_max / 2)
 		n += fill;
 
 	return n;
@@ -83,17 +83,17 @@ static inline int ep_to_bit(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_device_state(struct ci13xxx *udc, u32 dma)
+static int hw_device_state(struct ci13xxx *ci, u32 dma)
 {
 	if (dma) {
-		hw_write(udc, OP_ENDPTLISTADDR, ~0, dma);
+		hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
 		/* interrupt, error, port change, reset, sleep/suspend */
-		hw_write(udc, OP_USBINTR, ~0,
+		hw_write(ci, OP_USBINTR, ~0,
 			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
-		hw_write(udc, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	} else {
-		hw_write(udc, OP_USBCMD, USBCMD_RS, 0);
-		hw_write(udc, OP_USBINTR, ~0, 0);
+		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+		hw_write(ci, OP_USBINTR, ~0, 0);
 	}
 	return 0;
 }
@@ -105,16 +105,16 @@ static int hw_device_state(struct ci13xxx *udc, u32 dma)
  *
  * This function returns an error code
  */
-static int hw_ep_flush(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_flush(struct ci13xxx *ci, int num, int dir)
 {
 	int n = hw_ep_bit(num, dir);
 
 	do {
 		/* flush any pending transfer */
-		hw_write(udc, OP_ENDPTFLUSH, BIT(n), BIT(n));
-		while (hw_read(udc, OP_ENDPTFLUSH, BIT(n)))
+		hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n));
+		while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
 			cpu_relax();
-	} while (hw_read(udc, OP_ENDPTSTAT, BIT(n)));
+	} while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
 
 	return 0;
 }
@@ -126,10 +126,10 @@ static int hw_ep_flush(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns an error code
  */
-static int hw_ep_disable(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_disable(struct ci13xxx *ci, int num, int dir)
 {
-	hw_ep_flush(udc, num, dir);
-	hw_write(udc, OP_ENDPTCTRL + num,
+	hw_ep_flush(ci, num, dir);
+	hw_write(ci, OP_ENDPTCTRL + num,
 		 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
 	return 0;
 }
@@ -142,7 +142,7 @@ static int hw_ep_disable(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns an error code
  */
-static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
+static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type)
 {
 	u32 mask, data;
 
@@ -165,7 +165,7 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
 		mask |= ENDPTCTRL_RXE;  /* enable  */
 		data |= ENDPTCTRL_RXE;
 	}
-	hw_write(udc, OP_ENDPTCTRL + num, mask, data);
+	hw_write(ci, OP_ENDPTCTRL + num, mask, data);
 	return 0;
 }
 
@@ -176,11 +176,11 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
  *
  * This function returns 1 if endpoint halted
  */
-static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir)
 {
 	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
 
-	return hw_read(udc, OP_ENDPTCTRL + num, mask) ? 1 : 0;
+	return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
 }
 
 /**
@@ -190,10 +190,10 @@ static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns setup status
  */
-static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n)
+static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n)
 {
-	n = ep_to_bit(udc, n);
-	return hw_test_and_clear(udc, OP_ENDPTSETUPSTAT, BIT(n));
+	n = ep_to_bit(ci, n);
+	return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n));
 }
 
 /**
@@ -204,18 +204,18 @@ static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl)
+static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl)
 {
 	int n = hw_ep_bit(num, dir);
 
-	if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num)))
+	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
-	hw_write(udc, OP_ENDPTPRIME, BIT(n), BIT(n));
+	hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n));
 
-	while (hw_read(udc, OP_ENDPTPRIME, BIT(n)))
+	while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 		cpu_relax();
-	if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num)))
+	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
 	/* status shoult be tested according with manual but it doesn't work */
@@ -231,7 +231,7 @@ static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl)
  *
  * This function returns an error code
  */
-static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
+static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value)
 {
 	if (value != 0 && value != 1)
 		return -EINVAL;
@@ -242,9 +242,9 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
 		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
 
 		/* data toggle - reserved for EP0 but it's in ESS */
-		hw_write(udc, reg, mask_xs|mask_xr,
+		hw_write(ci, reg, mask_xs|mask_xr,
 			  value ? mask_xs : mask_xr);
-	} while (value != hw_ep_get_halt(udc, num, dir));
+	} while (value != hw_ep_get_halt(ci, num, dir));
 
 	return 0;
 }
@@ -254,10 +254,10 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
  *
  * This function returns true if high speed port
  */
-static int hw_port_is_high_speed(struct ci13xxx *udc)
+static int hw_port_is_high_speed(struct ci13xxx *ci)
 {
-	return udc->hw_bank.lpm ? hw_read(udc, OP_DEVLC, DEVLC_PSPD) :
-		hw_read(udc, OP_PORTSC, PORTSC_HSP);
+	return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
+		hw_read(ci, OP_PORTSC, PORTSC_HSP);
 }
 
 /**
@@ -265,9 +265,9 @@ static int hw_port_is_high_speed(struct ci13xxx *udc)
  *
  * This function returns register data
  */
-static u32 hw_read_intr_enable(struct ci13xxx *udc)
+static u32 hw_read_intr_enable(struct ci13xxx *ci)
 {
-	return hw_read(udc, OP_USBINTR, ~0);
+	return hw_read(ci, OP_USBINTR, ~0);
 }
 
 /**
@@ -275,9 +275,9 @@ static u32 hw_read_intr_enable(struct ci13xxx *udc)
  *
  * This function returns register data
  */
-static u32 hw_read_intr_status(struct ci13xxx *udc)
+static u32 hw_read_intr_status(struct ci13xxx *ci)
 {
-	return hw_read(udc, OP_USBSTS, ~0);
+	return hw_read(ci, OP_USBSTS, ~0);
 }
 
 /**
@@ -287,10 +287,10 @@ static u32 hw_read_intr_status(struct ci13xxx *udc)
  *
  * This function returns complete status
  */
-static int hw_test_and_clear_complete(struct ci13xxx *udc, int n)
+static int hw_test_and_clear_complete(struct ci13xxx *ci, int n)
 {
-	n = ep_to_bit(udc, n);
-	return hw_test_and_clear(udc, OP_ENDPTCOMPLETE, BIT(n));
+	n = ep_to_bit(ci, n);
+	return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
 }
 
 /**
@@ -299,11 +299,11 @@ static int hw_test_and_clear_complete(struct ci13xxx *udc, int n)
  *
  * This function returns active interrutps
  */
-static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc)
+static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci)
 {
-	u32 reg = hw_read_intr_status(udc) & hw_read_intr_enable(udc);
+	u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
 
-	hw_write(udc, OP_USBSTS, ~0, reg);
+	hw_write(ci, OP_USBSTS, ~0, reg);
 	return reg;
 }
 
@@ -313,9 +313,9 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc)
  *
  * This function returns guard value
  */
-static int hw_test_and_clear_setup_guard(struct ci13xxx *udc)
+static int hw_test_and_clear_setup_guard(struct ci13xxx *ci)
 {
-	return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, 0);
+	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
 }
 
 /**
@@ -324,9 +324,9 @@ static int hw_test_and_clear_setup_guard(struct ci13xxx *udc)
  *
  * This function returns guard value
  */
-static int hw_test_and_set_setup_guard(struct ci13xxx *udc)
+static int hw_test_and_set_setup_guard(struct ci13xxx *ci)
 {
-	return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
+	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
 }
 
 /**
@@ -336,9 +336,9 @@ static int hw_test_and_set_setup_guard(struct ci13xxx *udc)
  * This function explicitly sets the address, without the "USBADRA" (advance)
  * feature, which is not supported by older versions of the controller.
  */
-static void hw_usb_set_address(struct ci13xxx *udc, u8 value)
+static void hw_usb_set_address(struct ci13xxx *ci, u8 value)
 {
-	hw_write(udc, OP_DEVICEADDR, DEVICEADDR_USBADR,
+	hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
 		 value << ffs_nr(DEVICEADDR_USBADR));
 }
 
@@ -348,21 +348,21 @@ static void hw_usb_set_address(struct ci13xxx *udc, u8 value)
  *
  * This function returns an error code
  */
-static int hw_usb_reset(struct ci13xxx *udc)
+static int hw_usb_reset(struct ci13xxx *ci)
 {
-	hw_usb_set_address(udc, 0);
+	hw_usb_set_address(ci, 0);
 
 	/* ESS flushes only at end?!? */
-	hw_write(udc, OP_ENDPTFLUSH,    ~0, ~0);
+	hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0);
 
 	/* clear setup token semaphores */
-	hw_write(udc, OP_ENDPTSETUPSTAT, 0,  0);
+	hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0);
 
 	/* clear complete status */
-	hw_write(udc, OP_ENDPTCOMPLETE,  0,  0);
+	hw_write(ci, OP_ENDPTCOMPLETE,  0,  0);
 
 	/* wait until all bits cleared */
-	while (hw_read(udc, OP_ENDPTPRIME, ~0))
+	while (hw_read(ci, OP_ENDPTPRIME, ~0))
 		udelay(10);             /* not RTOS friendly */
 
 	/* reset all endpoints ? */
@@ -394,7 +394,7 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep)
  */
 static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 {
-	struct ci13xxx *udc = mEp->udc;
+	struct ci13xxx *ci = mEp->ci;
 	unsigned i;
 	int ret = 0;
 	unsigned length = mReq->req.length;
@@ -417,7 +417,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 		if (!mReq->req.no_interrupt)
 			mReq->zptr->token   |= TD_IOC;
 	}
-	ret = usb_gadget_map_request(&udc->gadget, &mReq->req, mEp->dir);
+	ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir);
 	if (ret)
 		return ret;
 
@@ -453,13 +453,13 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 		else
 			mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK;
 		wmb();
-		if (hw_read(udc, OP_ENDPTPRIME, BIT(n)))
+		if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 			goto done;
 		do {
-			hw_write(udc, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
-			tmp_stat = hw_read(udc, OP_ENDPTSTAT, BIT(n));
-		} while (!hw_read(udc, OP_USBCMD, USBCMD_ATDTW));
-		hw_write(udc, OP_USBCMD, USBCMD_ATDTW, 0);
+			hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
+			tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
+		} while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
+		hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
 		if (tmp_stat)
 			goto done;
 	}
@@ -471,7 +471,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 
 	wmb();   /* synchronize before ep prime */
 
-	ret = hw_ep_prime(udc, mEp->num, mEp->dir,
+	ret = hw_ep_prime(ci, mEp->num, mEp->dir,
 			   mEp->type == USB_ENDPOINT_XFER_CONTROL);
 done:
 	return ret;
@@ -501,7 +501,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 
 	mReq->req.status = 0;
 
-	usb_gadget_unmap_request(&mEp->udc->gadget, &mReq->req, mEp->dir);
+	usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir);
 
 	mReq->req.status = mReq->ptr->token & TD_STATUS;
 	if ((TD_STATUS_HALTED & mReq->req.status) != 0)
@@ -533,7 +533,7 @@ __acquires(mEp->lock)
 	if (mEp == NULL)
 		return -EINVAL;
 
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	while (!list_empty(&mEp->qh.queue)) {
 
@@ -562,33 +562,33 @@ __acquires(mEp->lock)
 static int _gadget_stop_activity(struct usb_gadget *gadget)
 {
 	struct usb_ep *ep;
-	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx    *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	udc->remote_wakeup = 0;
-	udc->suspended = 0;
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->gadget.speed = USB_SPEED_UNKNOWN;
+	ci->remote_wakeup = 0;
+	ci->suspended = 0;
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	/* flush all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
 	}
-	usb_ep_fifo_flush(&udc->ep0out->ep);
-	usb_ep_fifo_flush(&udc->ep0in->ep);
+	usb_ep_fifo_flush(&ci->ep0out->ep);
+	usb_ep_fifo_flush(&ci->ep0in->ep);
 
-	if (udc->driver)
-		udc->driver->disconnect(gadget);
+	if (ci->driver)
+		ci->driver->disconnect(gadget);
 
 	/* make sure to disable all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_disable(ep);
 	}
 
-	if (udc->status != NULL) {
-		usb_ep_free_request(&udc->ep0in->ep, udc->status);
-		udc->status = NULL;
+	if (ci->status != NULL) {
+		usb_ep_free_request(&ci->ep0in->ep, ci->status);
+		ci->status = NULL;
 	}
 
 	return 0;
@@ -599,36 +599,36 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
  *****************************************************************************/
 /**
  * isr_reset_handler: USB reset interrupt handler
- * @udc: UDC device
+ * @ci: UDC device
  *
  * This function resets USB engine after a bus reset occurred
  */
-static void isr_reset_handler(struct ci13xxx *udc)
-__releases(udc->lock)
-__acquires(udc->lock)
+static void isr_reset_handler(struct ci13xxx *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
 {
 	int retval;
 
 	dbg_event(0xFF, "BUS RST", 0);
 
-	spin_unlock(&udc->lock);
-	retval = _gadget_stop_activity(&udc->gadget);
+	spin_unlock(&ci->lock);
+	retval = _gadget_stop_activity(&ci->gadget);
 	if (retval)
 		goto done;
 
-	retval = hw_usb_reset(udc);
+	retval = hw_usb_reset(ci);
 	if (retval)
 		goto done;
 
-	udc->status = usb_ep_alloc_request(&udc->ep0in->ep, GFP_ATOMIC);
-	if (udc->status == NULL)
+	ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
+	if (ci->status == NULL)
 		retval = -ENOMEM;
 
 done:
-	spin_lock(&udc->lock);
+	spin_lock(&ci->lock);
 
 	if (retval)
-		dev_err(udc->dev, "error: %i\n", retval);
+		dev_err(ci->dev, "error: %i\n", retval);
 }
 
 /**
@@ -649,17 +649,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
 
 /**
  * isr_get_status_response: get_status request response
- * @udc: udc struct
+ * @ci: ci struct
  * @setup: setup request packet
  *
  * This function returns an error code
  */
-static int isr_get_status_response(struct ci13xxx *udc,
+static int isr_get_status_response(struct ci13xxx *ci,
 				   struct usb_ctrlrequest *setup)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
-	struct ci13xxx_ep *mEp = udc->ep0in;
+	struct ci13xxx_ep *mEp = ci->ep0in;
 	struct usb_request *req = NULL;
 	gfp_t gfp_flags = GFP_ATOMIC;
 	int dir, num, retval;
@@ -683,14 +683,14 @@ __acquires(mEp->lock)
 
 	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
 		/* Assume that device is bus powered for now. */
-		*(u16 *)req->buf = udc->remote_wakeup << 1;
+		*(u16 *)req->buf = ci->remote_wakeup << 1;
 		retval = 0;
 	} else if ((setup->bRequestType & USB_RECIP_MASK) \
 		   == USB_RECIP_ENDPOINT) {
 		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
 			TX : RX;
 		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
-		*(u16 *)req->buf = hw_ep_get_halt(udc, num, dir);
+		*(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
 	}
 	/* else do nothing; reserved for future use */
 
@@ -722,39 +722,39 @@ __acquires(mEp->lock)
 static void
 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct ci13xxx *udc = req->context;
+	struct ci13xxx *ci = req->context;
 	unsigned long flags;
 
-	if (udc->setaddr) {
-		hw_usb_set_address(udc, udc->address);
-		udc->setaddr = false;
+	if (ci->setaddr) {
+		hw_usb_set_address(ci, ci->address);
+		ci->setaddr = false;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (udc->test_mode)
-		hw_port_test_set(udc, udc->test_mode);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (ci->test_mode)
+		hw_port_test_set(ci, ci->test_mode);
+	spin_unlock_irqrestore(&ci->lock, flags);
 }
 
 /**
  * isr_setup_status_phase: queues the status phase of a setup transation
- * @udc: udc struct
+ * @ci: ci struct
  *
  * This function returns an error code
  */
-static int isr_setup_status_phase(struct ci13xxx *udc)
+static int isr_setup_status_phase(struct ci13xxx *ci)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
 	int retval;
 	struct ci13xxx_ep *mEp;
 
-	mEp = (udc->ep0_dir == TX) ? udc->ep0out : udc->ep0in;
-	udc->status->context = udc;
-	udc->status->complete = isr_setup_status_complete;
+	mEp = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
+	ci->status->context = ci;
+	ci->status->complete = isr_setup_status_complete;
 
 	spin_unlock(mEp->lock);
-	retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
+	retval = usb_ep_queue(&mEp->ep, ci->status, GFP_ATOMIC);
 	spin_lock(mEp->lock);
 
 	return retval;
@@ -789,7 +789,7 @@ __acquires(mEp->lock)
 			spin_unlock(mEp->lock);
 			if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) &&
 					mReq->req.length)
-				mEpTemp = mEp->udc->ep0in;
+				mEpTemp = mEp->ci->ep0in;
 			mReq->req.complete(&mEpTemp->ep, &mReq->req);
 			spin_lock(mEp->lock);
 		}
@@ -805,48 +805,48 @@ __acquires(mEp->lock)
 
 /**
  * isr_tr_complete_handler: transaction complete interrupt handler
- * @udc: UDC descriptor
+ * @ci: UDC descriptor
  *
  * This function handles traffic events
  */
-static void isr_tr_complete_handler(struct ci13xxx *udc)
-__releases(udc->lock)
-__acquires(udc->lock)
+static void isr_tr_complete_handler(struct ci13xxx *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
 {
 	unsigned i;
 	u8 tmode = 0;
 
-	for (i = 0; i < udc->hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp  = &udc->ci13xxx_ep[i];
+	for (i = 0; i < ci->hw_ep_max; i++) {
+		struct ci13xxx_ep *mEp  = &ci->ci13xxx_ep[i];
 		int type, num, dir, err = -EINVAL;
 		struct usb_ctrlrequest req;
 
 		if (mEp->ep.desc == NULL)
 			continue;   /* not configured */
 
-		if (hw_test_and_clear_complete(udc, i)) {
+		if (hw_test_and_clear_complete(ci, i)) {
 			err = isr_tr_complete_low(mEp);
 			if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
 				if (err > 0)   /* needs status phase */
-					err = isr_setup_status_phase(udc);
+					err = isr_setup_status_phase(ci);
 				if (err < 0) {
 					dbg_event(_usb_addr(mEp),
 						  "ERROR", err);
-					spin_unlock(&udc->lock);
+					spin_unlock(&ci->lock);
 					if (usb_ep_set_halt(&mEp->ep))
-						dev_err(udc->dev,
+						dev_err(ci->dev,
 							"error: ep_set_halt\n");
-					spin_lock(&udc->lock);
+					spin_lock(&ci->lock);
 				}
 			}
 		}
 
 		if (mEp->type != USB_ENDPOINT_XFER_CONTROL ||
-		    !hw_test_and_clear_setup_status(udc, i))
+		    !hw_test_and_clear_setup_status(ci, i))
 			continue;
 
 		if (i != 0) {
-			dev_warn(udc->dev, "ctrl traffic at endpoint %d\n", i);
+			dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i);
 			continue;
 		}
 
@@ -854,18 +854,18 @@ __acquires(udc->lock)
 		 * Flush data and handshake transactions of previous
 		 * setup packet.
 		 */
-		_ep_nuke(udc->ep0out);
-		_ep_nuke(udc->ep0in);
+		_ep_nuke(ci->ep0out);
+		_ep_nuke(ci->ep0in);
 
 		/* read_setup_packet */
 		do {
-			hw_test_and_set_setup_guard(udc);
+			hw_test_and_set_setup_guard(ci);
 			memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
-		} while (!hw_test_and_clear_setup_guard(udc));
+		} while (!hw_test_and_clear_setup_guard(ci));
 
 		type = req.bRequestType;
 
-		udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
+		ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
 
 		dbg_setup(_usb_addr(mEp), &req);
 
@@ -880,23 +880,23 @@ __acquires(udc->lock)
 				dir = num & USB_ENDPOINT_DIR_MASK;
 				num &= USB_ENDPOINT_NUMBER_MASK;
 				if (dir) /* TX */
-					num += udc->hw_ep_max/2;
-				if (!udc->ci13xxx_ep[num].wedge) {
-					spin_unlock(&udc->lock);
+					num += ci->hw_ep_max/2;
+				if (!ci->ci13xxx_ep[num].wedge) {
+					spin_unlock(&ci->lock);
 					err = usb_ep_clear_halt(
-						&udc->ci13xxx_ep[num].ep);
-					spin_lock(&udc->lock);
+						&ci->ci13xxx_ep[num].ep);
+					spin_lock(&ci->lock);
 					if (err)
 						break;
 				}
-				err = isr_setup_status_phase(udc);
+				err = isr_setup_status_phase(ci);
 			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
 					le16_to_cpu(req.wValue) ==
 					USB_DEVICE_REMOTE_WAKEUP) {
 				if (req.wLength != 0)
 					break;
-				udc->remote_wakeup = 0;
-				err = isr_setup_status_phase(udc);
+				ci->remote_wakeup = 0;
+				err = isr_setup_status_phase(ci);
 			} else {
 				goto delegate;
 			}
@@ -909,7 +909,7 @@ __acquires(udc->lock)
 			if (le16_to_cpu(req.wLength) != 2 ||
 			    le16_to_cpu(req.wValue)  != 0)
 				break;
-			err = isr_get_status_response(udc, &req);
+			err = isr_get_status_response(ci, &req);
 			break;
 		case USB_REQ_SET_ADDRESS:
 			if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
@@ -917,9 +917,9 @@ __acquires(udc->lock)
 			if (le16_to_cpu(req.wLength) != 0 ||
 			    le16_to_cpu(req.wIndex)  != 0)
 				break;
-			udc->address = (u8)le16_to_cpu(req.wValue);
-			udc->setaddr = true;
-			err = isr_setup_status_phase(udc);
+			ci->address = (u8)le16_to_cpu(req.wValue);
+			ci->setaddr = true;
+			err = isr_setup_status_phase(ci);
 			break;
 		case USB_REQ_SET_FEATURE:
 			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
@@ -931,20 +931,20 @@ __acquires(udc->lock)
 				dir = num & USB_ENDPOINT_DIR_MASK;
 				num &= USB_ENDPOINT_NUMBER_MASK;
 				if (dir) /* TX */
-					num += udc->hw_ep_max/2;
+					num += ci->hw_ep_max/2;
 
-				spin_unlock(&udc->lock);
-				err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep);
-				spin_lock(&udc->lock);
+				spin_unlock(&ci->lock);
+				err = usb_ep_set_halt(&ci->ci13xxx_ep[num].ep);
+				spin_lock(&ci->lock);
 				if (!err)
-					isr_setup_status_phase(udc);
+					isr_setup_status_phase(ci);
 			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
 				if (req.wLength != 0)
 					break;
 				switch (le16_to_cpu(req.wValue)) {
 				case USB_DEVICE_REMOTE_WAKEUP:
-					udc->remote_wakeup = 1;
-					err = isr_setup_status_phase(udc);
+					ci->remote_wakeup = 1;
+					err = isr_setup_status_phase(ci);
 					break;
 				case USB_DEVICE_TEST_MODE:
 					tmode = le16_to_cpu(req.wIndex) >> 8;
@@ -954,9 +954,9 @@ __acquires(udc->lock)
 					case TEST_SE0_NAK:
 					case TEST_PACKET:
 					case TEST_FORCE_EN:
-						udc->test_mode = tmode;
+						ci->test_mode = tmode;
 						err = isr_setup_status_phase(
-								udc);
+								ci);
 						break;
 					default:
 						break;
@@ -971,21 +971,21 @@ __acquires(udc->lock)
 		default:
 delegate:
 			if (req.wLength == 0)   /* no data phase */
-				udc->ep0_dir = TX;
+				ci->ep0_dir = TX;
 
-			spin_unlock(&udc->lock);
-			err = udc->driver->setup(&udc->gadget, &req);
-			spin_lock(&udc->lock);
+			spin_unlock(&ci->lock);
+			err = ci->driver->setup(&ci->gadget, &req);
+			spin_lock(&ci->lock);
 			break;
 		}
 
 		if (err < 0) {
 			dbg_event(_usb_addr(mEp), "ERROR", err);
 
-			spin_unlock(&udc->lock);
+			spin_unlock(&ci->lock);
 			if (usb_ep_set_halt(&mEp->ep))
-				dev_err(udc->dev, "error: ep_set_halt\n");
-			spin_lock(&udc->lock);
+				dev_err(ci->dev, "error: ep_set_halt\n");
+			spin_lock(&ci->lock);
 		}
 	}
 }
@@ -1015,7 +1015,7 @@ static int ep_enable(struct usb_ep *ep,
 	mEp->ep.desc = desc;
 
 	if (!list_empty(&mEp->qh.queue))
-		dev_warn(mEp->udc->dev, "enabling a non-empty endpoint!\n");
+		dev_warn(mEp->ci->dev, "enabling a non-empty endpoint!\n");
 
 	mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
 	mEp->num  = usb_endpoint_num(desc);
@@ -1043,7 +1043,7 @@ static int ep_enable(struct usb_ep *ep,
 	 * is always enabled
 	 */
 	if (mEp->num)
-		retval |= hw_ep_enable(mEp->udc, mEp->num, mEp->dir, mEp->type);
+		retval |= hw_ep_enable(mEp->ci, mEp->num, mEp->dir, mEp->type);
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 	return retval;
@@ -1074,7 +1074,7 @@ static int ep_disable(struct usb_ep *ep)
 		dbg_event(_usb_addr(mEp), "DISABLE", 0);
 
 		retval |= _ep_nuke(mEp);
-		retval |= hw_ep_disable(mEp->udc, mEp->num, mEp->dir);
+		retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir);
 
 		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
 			mEp->dir = (mEp->dir == TX) ? RX : TX;
@@ -1131,7 +1131,7 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
 	if (ep == NULL || req == NULL) {
 		return;
 	} else if (!list_empty(&mReq->queue)) {
-		dev_err(mEp->udc->dev, "freeing queued request\n");
+		dev_err(mEp->ci->dev, "freeing queued request\n");
 		return;
 	}
 
@@ -1156,7 +1156,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 {
 	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
 	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
-	struct ci13xxx *udc = mEp->udc;
+	struct ci13xxx *ci = mEp->ci;
 	int retval = 0;
 	unsigned long flags;
 
@@ -1167,12 +1167,12 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 
 	if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
 		if (req->length)
-			mEp = (udc->ep0_dir == RX) ?
-			       udc->ep0out : udc->ep0in;
+			mEp = (ci->ep0_dir == RX) ?
+			       ci->ep0out : ci->ep0in;
 		if (!list_empty(&mEp->qh.queue)) {
 			_ep_nuke(mEp);
 			retval = -EOVERFLOW;
-			dev_warn(mEp->udc->dev, "endpoint ctrl %X nuked\n",
+			dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n",
 				 _usb_addr(mEp));
 		}
 	}
@@ -1180,14 +1180,14 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 	/* first nuke then test link, e.g. previous status has not sent */
 	if (!list_empty(&mReq->queue)) {
 		retval = -EBUSY;
-		dev_err(mEp->udc->dev, "request already in queue\n");
+		dev_err(mEp->ci->dev, "request already in queue\n");
 		goto done;
 	}
 
 	if (req->length > 4 * CI13XXX_PAGE_SIZE) {
 		req->length = 4 * CI13XXX_PAGE_SIZE;
 		retval = -EMSGSIZE;
-		dev_warn(mEp->udc->dev, "request length truncated\n");
+		dev_warn(mEp->ci->dev, "request length truncated\n");
 	}
 
 	dbg_queue(_usb_addr(mEp), req, retval);
@@ -1230,12 +1230,12 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 
 	dbg_event(_usb_addr(mEp), "DEQUEUE", 0);
 
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	/* pop request */
 	list_del_init(&mReq->queue);
 
-	usb_gadget_unmap_request(&mEp->udc->gadget, req, mEp->dir);
+	usb_gadget_unmap_request(&mEp->ci->gadget, req, mEp->dir);
 
 	req->status = -ECONNRESET;
 
@@ -1277,7 +1277,7 @@ static int ep_set_halt(struct usb_ep *ep, int value)
 	direction = mEp->dir;
 	do {
 		dbg_event(_usb_addr(mEp), "HALT", value);
-		retval |= hw_ep_set_halt(mEp->udc, mEp->num, mEp->dir, value);
+		retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value);
 
 		if (!value)
 			mEp->wedge = 0;
@@ -1325,14 +1325,14 @@ static void ep_fifo_flush(struct usb_ep *ep)
 	unsigned long flags;
 
 	if (ep == NULL) {
-		dev_err(mEp->udc->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
+		dev_err(mEp->ci->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
 		return;
 	}
 
 	spin_lock_irqsave(mEp->lock, flags);
 
 	dbg_event(_usb_addr(mEp), "FFLUSH", 0);
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 }
@@ -1358,30 +1358,30 @@ static const struct usb_ep_ops usb_ep_ops = {
  *****************************************************************************/
 static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int gadget_ready = 0;
 
-	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
+	if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
 		return -EOPNOTSUPP;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->vbus_active = is_active;
-	if (udc->driver)
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->vbus_active = is_active;
+	if (ci->driver)
 		gadget_ready = 1;
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	if (gadget_ready) {
 		if (is_active) {
 			pm_runtime_get_sync(&_gadget->dev);
-			hw_device_reset(udc, USBMODE_CM_DC);
-			hw_device_state(udc, udc->ep0out->qh.dma);
+			hw_device_reset(ci, USBMODE_CM_DC);
+			hw_device_state(ci, ci->ep0out->qh.dma);
 		} else {
-			hw_device_state(udc, 0);
-			if (udc->platdata->notify_event)
-				udc->platdata->notify_event(udc,
+			hw_device_state(ci, 0);
+			if (ci->platdata->notify_event)
+				ci->platdata->notify_event(ci,
 				CI13XXX_CONTROLLER_STOPPED_EVENT);
-			_gadget_stop_activity(&udc->gadget);
+			_gadget_stop_activity(&ci->gadget);
 			pm_runtime_put_sync(&_gadget->dev);
 		}
 	}
@@ -1391,31 +1391,31 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 
 static int ci13xxx_wakeup(struct usb_gadget *_gadget)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int ret = 0;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (!udc->remote_wakeup) {
+	spin_lock_irqsave(&ci->lock, flags);
+	if (!ci->remote_wakeup) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
-	if (!hw_read(udc, OP_PORTSC, PORTSC_SUSP)) {
+	if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
 		ret = -EINVAL;
 		goto out;
 	}
-	hw_write(udc, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
+	hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
 out:
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 	return ret;
 }
 
 static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 
-	if (udc->transceiver)
-		return usb_phy_set_power(udc->transceiver, mA);
+	if (ci->transceiver)
+		return usb_phy_set_power(ci->transceiver, mA);
 	return -ENOTSUPP;
 }
 
@@ -1436,28 +1436,28 @@ static const struct usb_gadget_ops usb_gadget_ops = {
 	.udc_stop	= ci13xxx_stop,
 };
 
-static int init_eps(struct ci13xxx *udc)
+static int init_eps(struct ci13xxx *ci)
 {
 	int retval = 0, i, j;
 
-	for (i = 0; i < udc->hw_ep_max/2; i++)
+	for (i = 0; i < ci->hw_ep_max/2; i++)
 		for (j = RX; j <= TX; j++) {
-			int k = i + j * udc->hw_ep_max/2;
-			struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k];
+			int k = i + j * ci->hw_ep_max/2;
+			struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[k];
 
 			scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
 					(j == TX)  ? "in" : "out");
 
-			mEp->udc          = udc;
-			mEp->lock         = &udc->lock;
-			mEp->td_pool      = udc->td_pool;
+			mEp->ci          = ci;
+			mEp->lock         = &ci->lock;
+			mEp->td_pool      = ci->td_pool;
 
 			mEp->ep.name      = mEp->name;
 			mEp->ep.ops       = &usb_ep_ops;
 			mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
 
 			INIT_LIST_HEAD(&mEp->qh.queue);
-			mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL,
+			mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
 						     &mEp->qh.dma);
 			if (mEp->qh.ptr == NULL)
 				retval = -ENOMEM;
@@ -1470,14 +1470,14 @@ static int init_eps(struct ci13xxx *udc)
 			 */
 			if (i == 0) {
 				if (j == RX)
-					udc->ep0out = mEp;
+					ci->ep0out = mEp;
 				else
-					udc->ep0in = mEp;
+					ci->ep0in = mEp;
 
 				continue;
 			}
 
-			list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list);
+			list_add_tail(&mEp->ep.ep_list, &ci->gadget.ep_list);
 		}
 
 	return retval;
@@ -1493,7 +1493,7 @@ static int init_eps(struct ci13xxx *udc)
 static int ci13xxx_start(struct usb_gadget *gadget,
 			 struct usb_gadget_driver *driver)
 {
-	struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int retval = -ENOMEM;
 
@@ -1501,35 +1501,35 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 		return -EINVAL;
 
 
-	udc->ep0out->ep.desc = &ctrl_endpt_out_desc;
-	retval = usb_ep_enable(&udc->ep0out->ep);
+	ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
+	retval = usb_ep_enable(&ci->ep0out->ep);
 	if (retval)
 		return retval;
 
-	udc->ep0in->ep.desc = &ctrl_endpt_in_desc;
-	retval = usb_ep_enable(&udc->ep0in->ep);
+	ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
+	retval = usb_ep_enable(&ci->ep0in->ep);
 	if (retval)
 		return retval;
-	spin_lock_irqsave(&udc->lock, flags);
-
-	udc->driver = driver;
-	pm_runtime_get_sync(&udc->gadget.dev);
-	if (udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
-		if (udc->vbus_active) {
-			if (udc->platdata->flags & CI13XXX_REGS_SHARED)
-				hw_device_reset(udc, USBMODE_CM_DC);
+	spin_lock_irqsave(&ci->lock, flags);
+
+	ci->driver = driver;
+	pm_runtime_get_sync(&ci->gadget.dev);
+	if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
+		if (ci->vbus_active) {
+			if (ci->platdata->flags & CI13XXX_REGS_SHARED)
+				hw_device_reset(ci, USBMODE_CM_DC);
 		} else {
-			pm_runtime_put_sync(&udc->gadget.dev);
+			pm_runtime_put_sync(&ci->gadget.dev);
 			goto done;
 		}
 	}
 
-	retval = hw_device_state(udc, udc->ep0out->qh.dma);
+	retval = hw_device_state(ci, ci->ep0out->qh.dma);
 	if (retval)
-		pm_runtime_put_sync(&udc->gadget.dev);
+		pm_runtime_put_sync(&ci->gadget.dev);
 
  done:
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 	return retval;
 }
 
@@ -1539,25 +1539,25 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 static int ci13xxx_stop(struct usb_gadget *gadget,
 			struct usb_gadget_driver *driver)
 {
-	struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 
-	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
-			udc->vbus_active) {
-		hw_device_state(udc, 0);
-		if (udc->platdata->notify_event)
-			udc->platdata->notify_event(udc,
+	if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
+			ci->vbus_active) {
+		hw_device_state(ci, 0);
+		if (ci->platdata->notify_event)
+			ci->platdata->notify_event(ci,
 			CI13XXX_CONTROLLER_STOPPED_EVENT);
-		udc->driver = NULL;
-		spin_unlock_irqrestore(&udc->lock, flags);
-		_gadget_stop_activity(&udc->gadget);
-		spin_lock_irqsave(&udc->lock, flags);
-		pm_runtime_put(&udc->gadget.dev);
+		ci->driver = NULL;
+		spin_unlock_irqrestore(&ci->lock, flags);
+		_gadget_stop_activity(&ci->gadget);
+		spin_lock_irqsave(&ci->lock, flags);
+		pm_runtime_put(&ci->gadget.dev);
 	}
 
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return 0;
 }
@@ -1566,64 +1566,64 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
  * BUS block
  *****************************************************************************/
 /**
- * udc_irq: udc interrupt handler
+ * udc_irq: ci interrupt handler
  *
  * This function returns IRQ_HANDLED if the IRQ has been handled
  * It locks access to registers
  */
-static irqreturn_t udc_irq(struct ci13xxx *udc)
+static irqreturn_t udc_irq(struct ci13xxx *ci)
 {
 	irqreturn_t retval;
 	u32 intr;
 
-	if (udc == NULL)
+	if (ci == NULL)
 		return IRQ_HANDLED;
 
-	spin_lock(&udc->lock);
+	spin_lock(&ci->lock);
 
-	if (udc->platdata->flags & CI13XXX_REGS_SHARED) {
-		if (hw_read(udc, OP_USBMODE, USBMODE_CM) !=
+	if (ci->platdata->flags & CI13XXX_REGS_SHARED) {
+		if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
 				USBMODE_CM_DC) {
-			spin_unlock(&udc->lock);
+			spin_unlock(&ci->lock);
 			return IRQ_NONE;
 		}
 	}
-	intr = hw_test_and_clear_intr_active(udc);
+	intr = hw_test_and_clear_intr_active(ci);
 	dbg_interrupt(intr);
 
 	if (intr) {
 		/* order defines priority - do NOT change it */
 		if (USBi_URI & intr)
-			isr_reset_handler(udc);
+			isr_reset_handler(ci);
 
 		if (USBi_PCI & intr) {
-			udc->gadget.speed = hw_port_is_high_speed(udc) ?
+			ci->gadget.speed = hw_port_is_high_speed(ci) ?
 				USB_SPEED_HIGH : USB_SPEED_FULL;
-			if (udc->suspended && udc->driver->resume) {
-				spin_unlock(&udc->lock);
-				udc->driver->resume(&udc->gadget);
-				spin_lock(&udc->lock);
-				udc->suspended = 0;
+			if (ci->suspended && ci->driver->resume) {
+				spin_unlock(&ci->lock);
+				ci->driver->resume(&ci->gadget);
+				spin_lock(&ci->lock);
+				ci->suspended = 0;
 			}
 		}
 
 		if (USBi_UI  & intr)
-			isr_tr_complete_handler(udc);
+			isr_tr_complete_handler(ci);
 
 		if (USBi_SLI & intr) {
-			if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
-			    udc->driver->suspend) {
-				udc->suspended = 1;
-				spin_unlock(&udc->lock);
-				udc->driver->suspend(&udc->gadget);
-				spin_lock(&udc->lock);
+			if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
+			    ci->driver->suspend) {
+				ci->suspended = 1;
+				spin_unlock(&ci->lock);
+				ci->driver->suspend(&ci->gadget);
+				spin_lock(&ci->lock);
 			}
 		}
 		retval = IRQ_HANDLED;
 	} else {
 		retval = IRQ_NONE;
 	}
-	spin_unlock(&udc->lock);
+	spin_unlock(&ci->lock);
 
 	return retval;
 }
@@ -1640,109 +1640,109 @@ static void udc_release(struct device *dev)
 
 /**
  * udc_start: initialize gadget role
- * @udc: chipidea controller
+ * @ci: chipidea controller
  */
-static int udc_start(struct ci13xxx *udc)
+static int udc_start(struct ci13xxx *ci)
 {
-	struct device *dev = udc->dev;
+	struct device *dev = ci->dev;
 	int retval = 0;
 
-	spin_lock_init(&udc->lock);
+	spin_lock_init(&ci->lock);
 
-	udc->gadget.ops          = &usb_gadget_ops;
-	udc->gadget.speed        = USB_SPEED_UNKNOWN;
-	udc->gadget.max_speed    = USB_SPEED_HIGH;
-	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = udc->platdata->name;
+	ci->gadget.ops          = &usb_gadget_ops;
+	ci->gadget.speed        = USB_SPEED_UNKNOWN;
+	ci->gadget.max_speed    = USB_SPEED_HIGH;
+	ci->gadget.is_otg       = 0;
+	ci->gadget.name         = ci->platdata->name;
 
-	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&ci->gadget.ep_list);
 
-	dev_set_name(&udc->gadget.dev, "gadget");
-	udc->gadget.dev.dma_mask = dev->dma_mask;
-	udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
-	udc->gadget.dev.parent   = dev;
-	udc->gadget.dev.release  = udc_release;
+	dev_set_name(&ci->gadget.dev, "gadget");
+	ci->gadget.dev.dma_mask = dev->dma_mask;
+	ci->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
+	ci->gadget.dev.parent   = dev;
+	ci->gadget.dev.release  = udc_release;
 
 	/* alloc resources */
-	udc->qh_pool = dma_pool_create("ci13xxx_qh", dev,
+	ci->qh_pool = dma_pool_create("ci13xxx_qh", dev,
 				       sizeof(struct ci13xxx_qh),
 				       64, CI13XXX_PAGE_SIZE);
-	if (udc->qh_pool == NULL)
+	if (ci->qh_pool == NULL)
 		return -ENOMEM;
 
-	udc->td_pool = dma_pool_create("ci13xxx_td", dev,
+	ci->td_pool = dma_pool_create("ci13xxx_td", dev,
 				       sizeof(struct ci13xxx_td),
 				       64, CI13XXX_PAGE_SIZE);
-	if (udc->td_pool == NULL) {
+	if (ci->td_pool == NULL) {
 		retval = -ENOMEM;
 		goto free_qh_pool;
 	}
 
-	retval = init_eps(udc);
+	retval = init_eps(ci);
 	if (retval)
 		goto free_pools;
 
-	udc->gadget.ep0 = &udc->ep0in->ep;
+	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	udc->transceiver = usb_get_transceiver();
+	ci->transceiver = usb_get_transceiver();
 
-	if (udc->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
-		if (udc->transceiver == NULL) {
+	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+		if (ci->transceiver == NULL) {
 			retval = -ENODEV;
 			goto free_pools;
 		}
 	}
 
-	if (!(udc->platdata->flags & CI13XXX_REGS_SHARED)) {
-		retval = hw_device_reset(udc, USBMODE_CM_DC);
+	if (!(ci->platdata->flags & CI13XXX_REGS_SHARED)) {
+		retval = hw_device_reset(ci, USBMODE_CM_DC);
 		if (retval)
 			goto put_transceiver;
 	}
 
-	retval = device_register(&udc->gadget.dev);
+	retval = device_register(&ci->gadget.dev);
 	if (retval) {
-		put_device(&udc->gadget.dev);
+		put_device(&ci->gadget.dev);
 		goto put_transceiver;
 	}
 
-	retval = dbg_create_files(&udc->gadget.dev);
+	retval = dbg_create_files(&ci->gadget.dev);
 	if (retval)
 		goto unreg_device;
 
-	if (udc->transceiver) {
-		retval = otg_set_peripheral(udc->transceiver->otg,
-						&udc->gadget);
+	if (ci->transceiver) {
+		retval = otg_set_peripheral(ci->transceiver->otg,
+						&ci->gadget);
 		if (retval)
 			goto remove_dbg;
 	}
 
-	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	retval = usb_add_gadget_udc(dev, &ci->gadget);
 	if (retval)
 		goto remove_trans;
 
-	pm_runtime_no_callbacks(&udc->gadget.dev);
-	pm_runtime_enable(&udc->gadget.dev);
+	pm_runtime_no_callbacks(&ci->gadget.dev);
+	pm_runtime_enable(&ci->gadget.dev);
 
 	return retval;
 
 remove_trans:
-	if (udc->transceiver) {
-		otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
-		usb_put_transceiver(udc->transceiver);
+	if (ci->transceiver) {
+		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
+		usb_put_transceiver(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
 remove_dbg:
-	dbg_remove_files(&udc->gadget.dev);
+	dbg_remove_files(&ci->gadget.dev);
 unreg_device:
-	device_unregister(&udc->gadget.dev);
+	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (udc->transceiver)
-		usb_put_transceiver(udc->transceiver);
+	if (ci->transceiver)
+		usb_put_transceiver(ci->transceiver);
 free_pools:
-	dma_pool_destroy(udc->td_pool);
+	dma_pool_destroy(ci->td_pool);
 free_qh_pool:
-	dma_pool_destroy(udc->qh_pool);
+	dma_pool_destroy(ci->qh_pool);
 	return retval;
 }
 
@@ -1751,32 +1751,32 @@ free_qh_pool:
  *
  * No interrupts active, the IRQ has been released
  */
-static void udc_stop(struct ci13xxx *udc)
+static void udc_stop(struct ci13xxx *ci)
 {
 	int i;
 
-	if (udc == NULL)
+	if (ci == NULL)
 		return;
 
-	usb_del_gadget_udc(&udc->gadget);
+	usb_del_gadget_udc(&ci->gadget);
 
-	for (i = 0; i < udc->hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
+	for (i = 0; i < ci->hw_ep_max; i++) {
+		struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
 
-		dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+		dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
 	}
 
-	dma_pool_destroy(udc->td_pool);
-	dma_pool_destroy(udc->qh_pool);
+	dma_pool_destroy(ci->td_pool);
+	dma_pool_destroy(ci->qh_pool);
 
-	if (udc->transceiver) {
-		otg_set_peripheral(udc->transceiver->otg, NULL);
-		usb_put_transceiver(udc->transceiver);
+	if (ci->transceiver) {
+		otg_set_peripheral(ci->transceiver->otg, NULL);
+		usb_put_transceiver(ci->transceiver);
 	}
-	dbg_remove_files(&udc->gadget.dev);
-	device_unregister(&udc->gadget.dev);
+	dbg_remove_files(&ci->gadget.dev);
+	device_unregister(&ci->gadget.dev);
 	/* my kobject is dynamic, I swear! */
-	memset(&udc->gadget, 0, sizeof(udc->gadget));
+	memset(&ci->gadget, 0, sizeof(ci->gadget));
 }
 
 /**
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index d4cf9706..d2f7e49 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -19,7 +19,7 @@ struct ci13xxx_platform_data {
 
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
-	void	(*notify_event) (struct ci13xxx *udc, unsigned event);
+	void	(*notify_event) (struct ci13xxx *ci, unsigned event);
 };
 
 /* Default offset of capability registers */
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci

[Richard Zhao]

struct ci13xxx represent the controller, which may be device or host,
so name its variables as ci.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/ci.h          |   26 +-
 drivers/usb/chipidea/ci13xxx_msm.c |   12 +-
 drivers/usb/chipidea/debug.c       |  146 ++++-----
 drivers/usb/chipidea/udc.c         |  630 ++++++++++++++++++------------------
 include/linux/usb/chipidea.h       |    2 +-
 5 files changed, 408 insertions(+), 408 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 0b09330..9655e35 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -36,7 +36,7 @@
  * @name: string description of the endpoint
  * @qh: queue head for this endpoint
  * @wedge: is the endpoint wedged
- * @udc: pointer to the controller
+ * @ci: pointer to the controller
  * @lock: pointer to controller's spinlock
  * @td_pool: pointer to controller's TD pool
  */
@@ -54,7 +54,7 @@ struct ci13xxx_ep {
 	int					wedge;
 
 	/* global resources */
-	struct ci13xxx				*udc;
+	struct ci13xxx				*ci;
 	spinlock_t				*lock;
 	struct dma_pool				*td_pool;
 };
@@ -250,9 +250,9 @@ static inline int ffs_nr(u32 x)
  *
  * This function returns register contents
  */
-static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask)
+static inline u32 hw_read(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask)
 {
-	return ioread32(udc->hw_bank.regmap[reg]) & mask;
+	return ioread32(ci->hw_bank.regmap[reg]) & mask;
 }
 
 /**
@@ -261,14 +261,14 @@ static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask)
  * @mask: bitfield mask
  * @data: new value
  */
-static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline void hw_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
 			    u32 mask, u32 data)
 {
 	if (~mask)
-		data = (ioread32(udc->hw_bank.regmap[reg]) & ~mask)
+		data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask)
 			| (data & mask);
 
-	iowrite32(data, udc->hw_bank.regmap[reg]);
+	iowrite32(data, ci->hw_bank.regmap[reg]);
 }
 
 /**
@@ -278,12 +278,12 @@ static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
  *
  * This function returns register contents
  */
-static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline u32 hw_test_and_clear(struct ci13xxx *ci, enum ci13xxx_regs reg,
 				    u32 mask)
 {
-	u32 val = ioread32(udc->hw_bank.regmap[reg]) & mask;
+	u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask;
 
-	iowrite32(val, udc->hw_bank.regmap[reg]);
+	iowrite32(val, ci->hw_bank.regmap[reg]);
 	return val;
 }
 
@@ -295,12 +295,12 @@ static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg,
  *
  * This function returns register contents
  */
-static inline u32 hw_test_and_write(struct ci13xxx *udc, enum ci13xxx_regs reg,
+static inline u32 hw_test_and_write(struct ci13xxx *ci, enum ci13xxx_regs reg,
 				    u32 mask, u32 data)
 {
-	u32 val = hw_read(udc, reg, ~0);
+	u32 val = hw_read(ci, reg, ~0);
 
-	hw_write(udc, reg, mask, data);
+	hw_write(ci, reg, mask, data);
 	return (val & mask) >> ffs_nr(mask);
 }
 
diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index 21a7c2e..a7dd9f1 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -15,11 +15,11 @@
 
 #include "ci.h"
 
-#define MSM_USB_BASE	(udc->hw_bank.abs)
+#define MSM_USB_BASE	(ci->hw_bank.abs)
 
-static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
+static void ci13xxx_msm_notify_event(struct ci13xxx *ci, unsigned event)
 {
-	struct device *dev = udc->gadget.dev.parent;
+	struct device *dev = ci->gadget.dev.parent;
 	int val;
 
 	switch (event) {
@@ -34,13 +34,13 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
 		 * Put the transceiver in non-driving mode. Otherwise host
 		 * may not detect soft-disconnection.
 		 */
-		val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL);
+		val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL);
 		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
 		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-		usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
+		usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL);
 		break;
 	default:
-		dev_dbg(dev, "unknown ci13xxx_udc event\n");
+		dev_dbg(dev, "unknown ci13xxx event\n");
 		break;
 	}
 }
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index c4b3e15..c6f50a2 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -68,15 +68,15 @@ void dbg_interrupt(u32 intmask)
  *
  * This function returns number of registers read
  */
-static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size)
+static size_t hw_register_read(struct ci13xxx *ci, u32 *buf, size_t size)
 {
 	unsigned i;
 
-	if (size > udc->hw_bank.size)
-		size = udc->hw_bank.size;
+	if (size > ci->hw_bank.size)
+		size = ci->hw_bank.size;
 
 	for (i = 0; i < size; i++)
-		buf[i] = hw_read(udc, i * sizeof(u32), ~0);
+		buf[i] = hw_read(ci, i * sizeof(u32), ~0);
 
 	return size;
 }
@@ -88,18 +88,18 @@ static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size)
  *
  * This function returns an error code
  */
-static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data)
+static int hw_register_write(struct ci13xxx *ci, u16 addr, u32 data)
 {
 	/* align */
 	addr /= sizeof(u32);
 
-	if (addr >= udc->hw_bank.size)
+	if (addr >= ci->hw_bank.size)
 		return -EINVAL;
 
 	/* align */
 	addr *= sizeof(u32);
 
-	hw_write(udc, addr, ~0, data);
+	hw_write(ci, addr, ~0, data);
 	return 0;
 }
 
@@ -110,13 +110,13 @@ static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data)
  *
  * This function returns an error code
  */
-static int hw_intr_clear(struct ci13xxx *udc, int n)
+static int hw_intr_clear(struct ci13xxx *ci, int n)
 {
 	if (n >= REG_BITS)
 		return -EINVAL;
 
-	hw_write(udc, OP_USBINTR, BIT(n), 0);
-	hw_write(udc, OP_USBSTS,  BIT(n), BIT(n));
+	hw_write(ci, OP_USBINTR, BIT(n), 0);
+	hw_write(ci, OP_USBSTS,  BIT(n), BIT(n));
 	return 0;
 }
 
@@ -127,15 +127,15 @@ static int hw_intr_clear(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_intr_force(struct ci13xxx *udc, int n)
+static int hw_intr_force(struct ci13xxx *ci, int n)
 {
 	if (n >= REG_BITS)
 		return -EINVAL;
 
-	hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
-	hw_write(udc, OP_USBINTR,  BIT(n), BIT(n));
-	hw_write(udc, OP_USBSTS,   BIT(n), BIT(n));
-	hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, 0);
+	hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE);
+	hw_write(ci, OP_USBINTR,  BIT(n), BIT(n));
+	hw_write(ci, OP_USBSTS,   BIT(n), BIT(n));
+	hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, 0);
 	return 0;
 }
 
@@ -147,12 +147,12 @@ static int hw_intr_force(struct ci13xxx *udc, int n)
 static ssize_t show_device(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	struct usb_gadget *gadget = &udc->gadget;
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
+	struct usb_gadget *gadget = &ci->gadget;
 	int n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
@@ -188,8 +188,8 @@ static DEVICE_ATTR(device, S_IRUSR, show_device, NULL);
 static ssize_t show_driver(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
-	struct usb_gadget_driver *driver = udc->driver;
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
+	struct usb_gadget_driver *driver = ci->driver;
 	int n = 0;
 
 	if (attr == NULL || buf == NULL) {
@@ -412,22 +412,22 @@ static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events);
 static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	u32 intr;
 	unsigned i, j, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 
 	/*n += scnprintf(buf + n, PAGE_SIZE - n,
-		       "status = %08x\n", hw_read_intr_status(udc));
+		       "status = %08x\n", hw_read_intr_status(ci));
 	n += scnprintf(buf + n, PAGE_SIZE - n,
-	"enable = %08x\n", hw_read_intr_enable(udc));*/
+	"enable = %08x\n", hw_read_intr_enable(ci));*/
 
 	n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n",
 		       isr_statistics.test);
@@ -471,7 +471,7 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 			n += scnprintf(buf + n, PAGE_SIZE - n, "\n");
 	}
 
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
@@ -485,31 +485,31 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr,
 static ssize_t store_inters(struct device *dev, struct device_attribute *attr,
 			    const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned en, bit;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "EINVAL\n");
+		dev_err(ci->dev, "EINVAL\n");
 		goto done;
 	}
 
 	if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) {
-		dev_err(udc->dev, "<1|0> <bit>: enable|disable interrupt\n");
+		dev_err(ci->dev, "<1|0> <bit>: enable|disable interrupt\n");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 	if (en) {
-		if (hw_intr_force(udc, bit))
+		if (hw_intr_force(ci, bit))
 			dev_err(dev, "invalid bit number\n");
 		else
 			isr_statistics.test++;
 	} else {
-		if (hw_intr_clear(udc, bit))
+		if (hw_intr_clear(ci, bit))
 			dev_err(dev, "invalid bit number\n");
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -524,18 +524,18 @@ static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters);
 static ssize_t show_port_test(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned mode;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "EINVAL\n");
+		dev_err(ci->dev, "EINVAL\n");
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	mode = hw_port_test_get(udc);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	mode = hw_port_test_get(ci);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode);
 }
@@ -549,24 +549,24 @@ static ssize_t store_port_test(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned mode;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		goto done;
 	}
 
 	if (sscanf(buf, "%u", &mode) != 1) {
-		dev_err(udc->dev, "<mode>: set port test mode");
+		dev_err(ci->dev, "<mode>: set port test mode");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (hw_port_test_set(udc, mode))
-		dev_err(udc->dev, "invalid mode\n");
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (hw_port_test_set(ci, mode))
+		dev_err(ci->dev, "invalid mode\n");
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -582,20 +582,20 @@ static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR,
 static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
 			   char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	unsigned i, j, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	for (i = 0; i < udc->hw_ep_max/2; i++) {
-		struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i];
+	spin_lock_irqsave(&ci->lock, flags);
+	for (i = 0; i < ci->hw_ep_max/2; i++) {
+		struct ci13xxx_ep *mEpRx = &ci->ci13xxx_ep[i];
 		struct ci13xxx_ep *mEpTx =
-			&udc->ci13xxx_ep[i + udc->hw_ep_max/2];
+			&ci->ci13xxx_ep[i + ci->hw_ep_max/2];
 		n += scnprintf(buf + n, PAGE_SIZE - n,
 			       "EP=%02i: RX=%08X TX=%08X\n",
 			       i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma);
@@ -606,7 +606,7 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr,
 				       *((u32 *)mEpTx->qh.ptr + j));
 		}
 	}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
@@ -621,25 +621,25 @@ static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL);
 static ssize_t show_registers(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	u32 *dump;
 	unsigned i, k, n = 0;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
 	dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL);
 	if (!dump) {
-		dev_err(udc->dev, "%s: out of memory\n", __func__);
+		dev_err(ci->dev, "%s: out of memory\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	k = hw_register_read(udc, dump, DUMP_ENTRIES);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	k = hw_register_read(ci, dump, DUMP_ENTRIES);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	for (i = 0; i < k; i++) {
 		n += scnprintf(buf + n, PAGE_SIZE - n,
@@ -660,24 +660,24 @@ static ssize_t store_registers(struct device *dev,
 			       struct device_attribute *attr,
 			       const char *buf, size_t count)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long addr, data, flags;
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		goto done;
 	}
 
 	if (sscanf(buf, "%li %li", &addr, &data) != 2) {
-		dev_err(udc->dev,
+		dev_err(ci->dev,
 			"<addr> <data>: write data to register address\n");
 		goto done;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (hw_register_write(udc, addr, data))
-		dev_err(udc->dev, "invalid address range\n");
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (hw_register_write(ci, addr, data))
+		dev_err(ci->dev, "invalid address range\n");
+	spin_unlock_irqrestore(&ci->lock, flags);
 
  done:
 	return count;
@@ -693,34 +693,34 @@ static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR,
 static ssize_t show_requests(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
-	struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev);
+	struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev);
 	unsigned long flags;
 	struct list_head   *ptr = NULL;
 	struct ci13xxx_req *req = NULL;
 	unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32);
 
 	if (attr == NULL || buf == NULL) {
-		dev_err(udc->dev, "[%s] EINVAL\n", __func__);
+		dev_err(ci->dev, "[%s] EINVAL\n", __func__);
 		return 0;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	for (i = 0; i < udc->hw_ep_max; i++)
-		list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue)
+	spin_lock_irqsave(&ci->lock, flags);
+	for (i = 0; i < ci->hw_ep_max; i++)
+		list_for_each(ptr, &ci->ci13xxx_ep[i].qh.queue)
 		{
 			req = list_entry(ptr, struct ci13xxx_req, queue);
 
 			n += scnprintf(buf + n, PAGE_SIZE - n,
 					"EP=%02i: TD=%08X %s\n",
-					i % udc->hw_ep_max/2, (u32)req->dma,
-					((i < udc->hw_ep_max/2) ? "RX" : "TX"));
+					i % ci->hw_ep_max/2, (u32)req->dma,
+					((i < ci->hw_ep_max/2) ? "RX" : "TX"));
 
 			for (j = 0; j < qSize; j++)
 				n += scnprintf(buf + n, PAGE_SIZE - n,
 						" %04X:    %08X\n", j,
 						*((u32 *)req->ptr + j));
 		}
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return n;
 }
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 68584bb..ca9b387 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1,5 +1,5 @@
 /*
- * udc.c - ChipIdea UDC driver
+ * ci.c - ChipIdea UDC driver
  *
  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
  *
@@ -66,11 +66,11 @@ static inline int hw_ep_bit(int num, int dir)
 	return num + (dir ? 16 : 0);
 }
 
-static inline int ep_to_bit(struct ci13xxx *udc, int n)
+static inline int ep_to_bit(struct ci13xxx *ci, int n)
 {
-	int fill = 16 - udc->hw_ep_max / 2;
+	int fill = 16 - ci->hw_ep_max / 2;
 
-	if (n >= udc->hw_ep_max / 2)
+	if (n >= ci->hw_ep_max / 2)
 		n += fill;
 
 	return n;
@@ -83,17 +83,17 @@ static inline int ep_to_bit(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_device_state(struct ci13xxx *udc, u32 dma)
+static int hw_device_state(struct ci13xxx *ci, u32 dma)
 {
 	if (dma) {
-		hw_write(udc, OP_ENDPTLISTADDR, ~0, dma);
+		hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
 		/* interrupt, error, port change, reset, sleep/suspend */
-		hw_write(udc, OP_USBINTR, ~0,
+		hw_write(ci, OP_USBINTR, ~0,
 			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
-		hw_write(udc, OP_USBCMD, USBCMD_RS, USBCMD_RS);
+		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	} else {
-		hw_write(udc, OP_USBCMD, USBCMD_RS, 0);
-		hw_write(udc, OP_USBINTR, ~0, 0);
+		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+		hw_write(ci, OP_USBINTR, ~0, 0);
 	}
 	return 0;
 }
@@ -105,16 +105,16 @@ static int hw_device_state(struct ci13xxx *udc, u32 dma)
  *
  * This function returns an error code
  */
-static int hw_ep_flush(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_flush(struct ci13xxx *ci, int num, int dir)
 {
 	int n = hw_ep_bit(num, dir);
 
 	do {
 		/* flush any pending transfer */
-		hw_write(udc, OP_ENDPTFLUSH, BIT(n), BIT(n));
-		while (hw_read(udc, OP_ENDPTFLUSH, BIT(n)))
+		hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n));
+		while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
 			cpu_relax();
-	} while (hw_read(udc, OP_ENDPTSTAT, BIT(n)));
+	} while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
 
 	return 0;
 }
@@ -126,10 +126,10 @@ static int hw_ep_flush(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns an error code
  */
-static int hw_ep_disable(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_disable(struct ci13xxx *ci, int num, int dir)
 {
-	hw_ep_flush(udc, num, dir);
-	hw_write(udc, OP_ENDPTCTRL + num,
+	hw_ep_flush(ci, num, dir);
+	hw_write(ci, OP_ENDPTCTRL + num,
 		 dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
 	return 0;
 }
@@ -142,7 +142,7 @@ static int hw_ep_disable(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns an error code
  */
-static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
+static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type)
 {
 	u32 mask, data;
 
@@ -165,7 +165,7 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
 		mask |= ENDPTCTRL_RXE;  /* enable  */
 		data |= ENDPTCTRL_RXE;
 	}
-	hw_write(udc, OP_ENDPTCTRL + num, mask, data);
+	hw_write(ci, OP_ENDPTCTRL + num, mask, data);
 	return 0;
 }
 
@@ -176,11 +176,11 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type)
  *
  * This function returns 1 if endpoint halted
  */
-static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir)
+static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir)
 {
 	u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
 
-	return hw_read(udc, OP_ENDPTCTRL + num, mask) ? 1 : 0;
+	return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
 }
 
 /**
@@ -190,10 +190,10 @@ static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir)
  *
  * This function returns setup status
  */
-static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n)
+static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n)
 {
-	n = ep_to_bit(udc, n);
-	return hw_test_and_clear(udc, OP_ENDPTSETUPSTAT, BIT(n));
+	n = ep_to_bit(ci, n);
+	return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n));
 }
 
 /**
@@ -204,18 +204,18 @@ static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n)
  *
  * This function returns an error code
  */
-static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl)
+static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl)
 {
 	int n = hw_ep_bit(num, dir);
 
-	if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num)))
+	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
-	hw_write(udc, OP_ENDPTPRIME, BIT(n), BIT(n));
+	hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n));
 
-	while (hw_read(udc, OP_ENDPTPRIME, BIT(n)))
+	while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 		cpu_relax();
-	if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num)))
+	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
 	/* status shoult be tested according with manual but it doesn't work */
@@ -231,7 +231,7 @@ static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl)
  *
  * This function returns an error code
  */
-static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
+static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value)
 {
 	if (value != 0 && value != 1)
 		return -EINVAL;
@@ -242,9 +242,9 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
 		u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
 
 		/* data toggle - reserved for EP0 but it's in ESS */
-		hw_write(udc, reg, mask_xs|mask_xr,
+		hw_write(ci, reg, mask_xs|mask_xr,
 			  value ? mask_xs : mask_xr);
-	} while (value != hw_ep_get_halt(udc, num, dir));
+	} while (value != hw_ep_get_halt(ci, num, dir));
 
 	return 0;
 }
@@ -254,10 +254,10 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value)
  *
  * This function returns true if high speed port
  */
-static int hw_port_is_high_speed(struct ci13xxx *udc)
+static int hw_port_is_high_speed(struct ci13xxx *ci)
 {
-	return udc->hw_bank.lpm ? hw_read(udc, OP_DEVLC, DEVLC_PSPD) :
-		hw_read(udc, OP_PORTSC, PORTSC_HSP);
+	return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
+		hw_read(ci, OP_PORTSC, PORTSC_HSP);
 }
 
 /**
@@ -265,9 +265,9 @@ static int hw_port_is_high_speed(struct ci13xxx *udc)
  *
  * This function returns register data
  */
-static u32 hw_read_intr_enable(struct ci13xxx *udc)
+static u32 hw_read_intr_enable(struct ci13xxx *ci)
 {
-	return hw_read(udc, OP_USBINTR, ~0);
+	return hw_read(ci, OP_USBINTR, ~0);
 }
 
 /**
@@ -275,9 +275,9 @@ static u32 hw_read_intr_enable(struct ci13xxx *udc)
  *
  * This function returns register data
  */
-static u32 hw_read_intr_status(struct ci13xxx *udc)
+static u32 hw_read_intr_status(struct ci13xxx *ci)
 {
-	return hw_read(udc, OP_USBSTS, ~0);
+	return hw_read(ci, OP_USBSTS, ~0);
 }
 
 /**
@@ -287,10 +287,10 @@ static u32 hw_read_intr_status(struct ci13xxx *udc)
  *
  * This function returns complete status
  */
-static int hw_test_and_clear_complete(struct ci13xxx *udc, int n)
+static int hw_test_and_clear_complete(struct ci13xxx *ci, int n)
 {
-	n = ep_to_bit(udc, n);
-	return hw_test_and_clear(udc, OP_ENDPTCOMPLETE, BIT(n));
+	n = ep_to_bit(ci, n);
+	return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
 }
 
 /**
@@ -299,11 +299,11 @@ static int hw_test_and_clear_complete(struct ci13xxx *udc, int n)
  *
  * This function returns active interrutps
  */
-static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc)
+static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci)
 {
-	u32 reg = hw_read_intr_status(udc) & hw_read_intr_enable(udc);
+	u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
 
-	hw_write(udc, OP_USBSTS, ~0, reg);
+	hw_write(ci, OP_USBSTS, ~0, reg);
 	return reg;
 }
 
@@ -313,9 +313,9 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc)
  *
  * This function returns guard value
  */
-static int hw_test_and_clear_setup_guard(struct ci13xxx *udc)
+static int hw_test_and_clear_setup_guard(struct ci13xxx *ci)
 {
-	return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, 0);
+	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
 }
 
 /**
@@ -324,9 +324,9 @@ static int hw_test_and_clear_setup_guard(struct ci13xxx *udc)
  *
  * This function returns guard value
  */
-static int hw_test_and_set_setup_guard(struct ci13xxx *udc)
+static int hw_test_and_set_setup_guard(struct ci13xxx *ci)
 {
-	return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
+	return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
 }
 
 /**
@@ -336,9 +336,9 @@ static int hw_test_and_set_setup_guard(struct ci13xxx *udc)
  * This function explicitly sets the address, without the "USBADRA" (advance)
  * feature, which is not supported by older versions of the controller.
  */
-static void hw_usb_set_address(struct ci13xxx *udc, u8 value)
+static void hw_usb_set_address(struct ci13xxx *ci, u8 value)
 {
-	hw_write(udc, OP_DEVICEADDR, DEVICEADDR_USBADR,
+	hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
 		 value << ffs_nr(DEVICEADDR_USBADR));
 }
 
@@ -348,21 +348,21 @@ static void hw_usb_set_address(struct ci13xxx *udc, u8 value)
  *
  * This function returns an error code
  */
-static int hw_usb_reset(struct ci13xxx *udc)
+static int hw_usb_reset(struct ci13xxx *ci)
 {
-	hw_usb_set_address(udc, 0);
+	hw_usb_set_address(ci, 0);
 
 	/* ESS flushes only@end?!? */
-	hw_write(udc, OP_ENDPTFLUSH,    ~0, ~0);
+	hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0);
 
 	/* clear setup token semaphores */
-	hw_write(udc, OP_ENDPTSETUPSTAT, 0,  0);
+	hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0);
 
 	/* clear complete status */
-	hw_write(udc, OP_ENDPTCOMPLETE,  0,  0);
+	hw_write(ci, OP_ENDPTCOMPLETE,  0,  0);
 
 	/* wait until all bits cleared */
-	while (hw_read(udc, OP_ENDPTPRIME, ~0))
+	while (hw_read(ci, OP_ENDPTPRIME, ~0))
 		udelay(10);             /* not RTOS friendly */
 
 	/* reset all endpoints ? */
@@ -394,7 +394,7 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep)
  */
 static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 {
-	struct ci13xxx *udc = mEp->udc;
+	struct ci13xxx *ci = mEp->ci;
 	unsigned i;
 	int ret = 0;
 	unsigned length = mReq->req.length;
@@ -417,7 +417,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 		if (!mReq->req.no_interrupt)
 			mReq->zptr->token   |= TD_IOC;
 	}
-	ret = usb_gadget_map_request(&udc->gadget, &mReq->req, mEp->dir);
+	ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir);
 	if (ret)
 		return ret;
 
@@ -453,13 +453,13 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 		else
 			mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK;
 		wmb();
-		if (hw_read(udc, OP_ENDPTPRIME, BIT(n)))
+		if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 			goto done;
 		do {
-			hw_write(udc, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
-			tmp_stat = hw_read(udc, OP_ENDPTSTAT, BIT(n));
-		} while (!hw_read(udc, OP_USBCMD, USBCMD_ATDTW));
-		hw_write(udc, OP_USBCMD, USBCMD_ATDTW, 0);
+			hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
+			tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
+		} while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
+		hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
 		if (tmp_stat)
 			goto done;
 	}
@@ -471,7 +471,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 
 	wmb();   /* synchronize before ep prime */
 
-	ret = hw_ep_prime(udc, mEp->num, mEp->dir,
+	ret = hw_ep_prime(ci, mEp->num, mEp->dir,
 			   mEp->type == USB_ENDPOINT_XFER_CONTROL);
 done:
 	return ret;
@@ -501,7 +501,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 
 	mReq->req.status = 0;
 
-	usb_gadget_unmap_request(&mEp->udc->gadget, &mReq->req, mEp->dir);
+	usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir);
 
 	mReq->req.status = mReq->ptr->token & TD_STATUS;
 	if ((TD_STATUS_HALTED & mReq->req.status) != 0)
@@ -533,7 +533,7 @@ __acquires(mEp->lock)
 	if (mEp == NULL)
 		return -EINVAL;
 
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	while (!list_empty(&mEp->qh.queue)) {
 
@@ -562,33 +562,33 @@ __acquires(mEp->lock)
 static int _gadget_stop_activity(struct usb_gadget *gadget)
 {
 	struct usb_ep *ep;
-	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx    *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->gadget.speed = USB_SPEED_UNKNOWN;
-	udc->remote_wakeup = 0;
-	udc->suspended = 0;
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->gadget.speed = USB_SPEED_UNKNOWN;
+	ci->remote_wakeup = 0;
+	ci->suspended = 0;
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	/* flush all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
 	}
-	usb_ep_fifo_flush(&udc->ep0out->ep);
-	usb_ep_fifo_flush(&udc->ep0in->ep);
+	usb_ep_fifo_flush(&ci->ep0out->ep);
+	usb_ep_fifo_flush(&ci->ep0in->ep);
 
-	if (udc->driver)
-		udc->driver->disconnect(gadget);
+	if (ci->driver)
+		ci->driver->disconnect(gadget);
 
 	/* make sure to disable all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_disable(ep);
 	}
 
-	if (udc->status != NULL) {
-		usb_ep_free_request(&udc->ep0in->ep, udc->status);
-		udc->status = NULL;
+	if (ci->status != NULL) {
+		usb_ep_free_request(&ci->ep0in->ep, ci->status);
+		ci->status = NULL;
 	}
 
 	return 0;
@@ -599,36 +599,36 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
  *****************************************************************************/
 /**
  * isr_reset_handler: USB reset interrupt handler
- * @udc: UDC device
+ * @ci: UDC device
  *
  * This function resets USB engine after a bus reset occurred
  */
-static void isr_reset_handler(struct ci13xxx *udc)
-__releases(udc->lock)
-__acquires(udc->lock)
+static void isr_reset_handler(struct ci13xxx *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
 {
 	int retval;
 
 	dbg_event(0xFF, "BUS RST", 0);
 
-	spin_unlock(&udc->lock);
-	retval = _gadget_stop_activity(&udc->gadget);
+	spin_unlock(&ci->lock);
+	retval = _gadget_stop_activity(&ci->gadget);
 	if (retval)
 		goto done;
 
-	retval = hw_usb_reset(udc);
+	retval = hw_usb_reset(ci);
 	if (retval)
 		goto done;
 
-	udc->status = usb_ep_alloc_request(&udc->ep0in->ep, GFP_ATOMIC);
-	if (udc->status == NULL)
+	ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
+	if (ci->status == NULL)
 		retval = -ENOMEM;
 
 done:
-	spin_lock(&udc->lock);
+	spin_lock(&ci->lock);
 
 	if (retval)
-		dev_err(udc->dev, "error: %i\n", retval);
+		dev_err(ci->dev, "error: %i\n", retval);
 }
 
 /**
@@ -649,17 +649,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
 
 /**
  * isr_get_status_response: get_status request response
- * @udc: udc struct
+ * @ci: ci struct
  * @setup: setup request packet
  *
  * This function returns an error code
  */
-static int isr_get_status_response(struct ci13xxx *udc,
+static int isr_get_status_response(struct ci13xxx *ci,
 				   struct usb_ctrlrequest *setup)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
-	struct ci13xxx_ep *mEp = udc->ep0in;
+	struct ci13xxx_ep *mEp = ci->ep0in;
 	struct usb_request *req = NULL;
 	gfp_t gfp_flags = GFP_ATOMIC;
 	int dir, num, retval;
@@ -683,14 +683,14 @@ __acquires(mEp->lock)
 
 	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
 		/* Assume that device is bus powered for now. */
-		*(u16 *)req->buf = udc->remote_wakeup << 1;
+		*(u16 *)req->buf = ci->remote_wakeup << 1;
 		retval = 0;
 	} else if ((setup->bRequestType & USB_RECIP_MASK) \
 		   == USB_RECIP_ENDPOINT) {
 		dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
 			TX : RX;
 		num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
-		*(u16 *)req->buf = hw_ep_get_halt(udc, num, dir);
+		*(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
 	}
 	/* else do nothing; reserved for future use */
 
@@ -722,39 +722,39 @@ __acquires(mEp->lock)
 static void
 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct ci13xxx *udc = req->context;
+	struct ci13xxx *ci = req->context;
 	unsigned long flags;
 
-	if (udc->setaddr) {
-		hw_usb_set_address(udc, udc->address);
-		udc->setaddr = false;
+	if (ci->setaddr) {
+		hw_usb_set_address(ci, ci->address);
+		ci->setaddr = false;
 	}
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (udc->test_mode)
-		hw_port_test_set(udc, udc->test_mode);
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
+	if (ci->test_mode)
+		hw_port_test_set(ci, ci->test_mode);
+	spin_unlock_irqrestore(&ci->lock, flags);
 }
 
 /**
  * isr_setup_status_phase: queues the status phase of a setup transation
- * @udc: udc struct
+ * @ci: ci struct
  *
  * This function returns an error code
  */
-static int isr_setup_status_phase(struct ci13xxx *udc)
+static int isr_setup_status_phase(struct ci13xxx *ci)
 __releases(mEp->lock)
 __acquires(mEp->lock)
 {
 	int retval;
 	struct ci13xxx_ep *mEp;
 
-	mEp = (udc->ep0_dir == TX) ? udc->ep0out : udc->ep0in;
-	udc->status->context = udc;
-	udc->status->complete = isr_setup_status_complete;
+	mEp = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
+	ci->status->context = ci;
+	ci->status->complete = isr_setup_status_complete;
 
 	spin_unlock(mEp->lock);
-	retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC);
+	retval = usb_ep_queue(&mEp->ep, ci->status, GFP_ATOMIC);
 	spin_lock(mEp->lock);
 
 	return retval;
@@ -789,7 +789,7 @@ __acquires(mEp->lock)
 			spin_unlock(mEp->lock);
 			if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) &&
 					mReq->req.length)
-				mEpTemp = mEp->udc->ep0in;
+				mEpTemp = mEp->ci->ep0in;
 			mReq->req.complete(&mEpTemp->ep, &mReq->req);
 			spin_lock(mEp->lock);
 		}
@@ -805,48 +805,48 @@ __acquires(mEp->lock)
 
 /**
  * isr_tr_complete_handler: transaction complete interrupt handler
- * @udc: UDC descriptor
+ * @ci: UDC descriptor
  *
  * This function handles traffic events
  */
-static void isr_tr_complete_handler(struct ci13xxx *udc)
-__releases(udc->lock)
-__acquires(udc->lock)
+static void isr_tr_complete_handler(struct ci13xxx *ci)
+__releases(ci->lock)
+__acquires(ci->lock)
 {
 	unsigned i;
 	u8 tmode = 0;
 
-	for (i = 0; i < udc->hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp  = &udc->ci13xxx_ep[i];
+	for (i = 0; i < ci->hw_ep_max; i++) {
+		struct ci13xxx_ep *mEp  = &ci->ci13xxx_ep[i];
 		int type, num, dir, err = -EINVAL;
 		struct usb_ctrlrequest req;
 
 		if (mEp->ep.desc == NULL)
 			continue;   /* not configured */
 
-		if (hw_test_and_clear_complete(udc, i)) {
+		if (hw_test_and_clear_complete(ci, i)) {
 			err = isr_tr_complete_low(mEp);
 			if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
 				if (err > 0)   /* needs status phase */
-					err = isr_setup_status_phase(udc);
+					err = isr_setup_status_phase(ci);
 				if (err < 0) {
 					dbg_event(_usb_addr(mEp),
 						  "ERROR", err);
-					spin_unlock(&udc->lock);
+					spin_unlock(&ci->lock);
 					if (usb_ep_set_halt(&mEp->ep))
-						dev_err(udc->dev,
+						dev_err(ci->dev,
 							"error: ep_set_halt\n");
-					spin_lock(&udc->lock);
+					spin_lock(&ci->lock);
 				}
 			}
 		}
 
 		if (mEp->type != USB_ENDPOINT_XFER_CONTROL ||
-		    !hw_test_and_clear_setup_status(udc, i))
+		    !hw_test_and_clear_setup_status(ci, i))
 			continue;
 
 		if (i != 0) {
-			dev_warn(udc->dev, "ctrl traffic at endpoint %d\n", i);
+			dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i);
 			continue;
 		}
 
@@ -854,18 +854,18 @@ __acquires(udc->lock)
 		 * Flush data and handshake transactions of previous
 		 * setup packet.
 		 */
-		_ep_nuke(udc->ep0out);
-		_ep_nuke(udc->ep0in);
+		_ep_nuke(ci->ep0out);
+		_ep_nuke(ci->ep0in);
 
 		/* read_setup_packet */
 		do {
-			hw_test_and_set_setup_guard(udc);
+			hw_test_and_set_setup_guard(ci);
 			memcpy(&req, &mEp->qh.ptr->setup, sizeof(req));
-		} while (!hw_test_and_clear_setup_guard(udc));
+		} while (!hw_test_and_clear_setup_guard(ci));
 
 		type = req.bRequestType;
 
-		udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
+		ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
 
 		dbg_setup(_usb_addr(mEp), &req);
 
@@ -880,23 +880,23 @@ __acquires(udc->lock)
 				dir = num & USB_ENDPOINT_DIR_MASK;
 				num &= USB_ENDPOINT_NUMBER_MASK;
 				if (dir) /* TX */
-					num += udc->hw_ep_max/2;
-				if (!udc->ci13xxx_ep[num].wedge) {
-					spin_unlock(&udc->lock);
+					num += ci->hw_ep_max/2;
+				if (!ci->ci13xxx_ep[num].wedge) {
+					spin_unlock(&ci->lock);
 					err = usb_ep_clear_halt(
-						&udc->ci13xxx_ep[num].ep);
-					spin_lock(&udc->lock);
+						&ci->ci13xxx_ep[num].ep);
+					spin_lock(&ci->lock);
 					if (err)
 						break;
 				}
-				err = isr_setup_status_phase(udc);
+				err = isr_setup_status_phase(ci);
 			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
 					le16_to_cpu(req.wValue) ==
 					USB_DEVICE_REMOTE_WAKEUP) {
 				if (req.wLength != 0)
 					break;
-				udc->remote_wakeup = 0;
-				err = isr_setup_status_phase(udc);
+				ci->remote_wakeup = 0;
+				err = isr_setup_status_phase(ci);
 			} else {
 				goto delegate;
 			}
@@ -909,7 +909,7 @@ __acquires(udc->lock)
 			if (le16_to_cpu(req.wLength) != 2 ||
 			    le16_to_cpu(req.wValue)  != 0)
 				break;
-			err = isr_get_status_response(udc, &req);
+			err = isr_get_status_response(ci, &req);
 			break;
 		case USB_REQ_SET_ADDRESS:
 			if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
@@ -917,9 +917,9 @@ __acquires(udc->lock)
 			if (le16_to_cpu(req.wLength) != 0 ||
 			    le16_to_cpu(req.wIndex)  != 0)
 				break;
-			udc->address = (u8)le16_to_cpu(req.wValue);
-			udc->setaddr = true;
-			err = isr_setup_status_phase(udc);
+			ci->address = (u8)le16_to_cpu(req.wValue);
+			ci->setaddr = true;
+			err = isr_setup_status_phase(ci);
 			break;
 		case USB_REQ_SET_FEATURE:
 			if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
@@ -931,20 +931,20 @@ __acquires(udc->lock)
 				dir = num & USB_ENDPOINT_DIR_MASK;
 				num &= USB_ENDPOINT_NUMBER_MASK;
 				if (dir) /* TX */
-					num += udc->hw_ep_max/2;
+					num += ci->hw_ep_max/2;
 
-				spin_unlock(&udc->lock);
-				err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep);
-				spin_lock(&udc->lock);
+				spin_unlock(&ci->lock);
+				err = usb_ep_set_halt(&ci->ci13xxx_ep[num].ep);
+				spin_lock(&ci->lock);
 				if (!err)
-					isr_setup_status_phase(udc);
+					isr_setup_status_phase(ci);
 			} else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
 				if (req.wLength != 0)
 					break;
 				switch (le16_to_cpu(req.wValue)) {
 				case USB_DEVICE_REMOTE_WAKEUP:
-					udc->remote_wakeup = 1;
-					err = isr_setup_status_phase(udc);
+					ci->remote_wakeup = 1;
+					err = isr_setup_status_phase(ci);
 					break;
 				case USB_DEVICE_TEST_MODE:
 					tmode = le16_to_cpu(req.wIndex) >> 8;
@@ -954,9 +954,9 @@ __acquires(udc->lock)
 					case TEST_SE0_NAK:
 					case TEST_PACKET:
 					case TEST_FORCE_EN:
-						udc->test_mode = tmode;
+						ci->test_mode = tmode;
 						err = isr_setup_status_phase(
-								udc);
+								ci);
 						break;
 					default:
 						break;
@@ -971,21 +971,21 @@ __acquires(udc->lock)
 		default:
 delegate:
 			if (req.wLength == 0)   /* no data phase */
-				udc->ep0_dir = TX;
+				ci->ep0_dir = TX;
 
-			spin_unlock(&udc->lock);
-			err = udc->driver->setup(&udc->gadget, &req);
-			spin_lock(&udc->lock);
+			spin_unlock(&ci->lock);
+			err = ci->driver->setup(&ci->gadget, &req);
+			spin_lock(&ci->lock);
 			break;
 		}
 
 		if (err < 0) {
 			dbg_event(_usb_addr(mEp), "ERROR", err);
 
-			spin_unlock(&udc->lock);
+			spin_unlock(&ci->lock);
 			if (usb_ep_set_halt(&mEp->ep))
-				dev_err(udc->dev, "error: ep_set_halt\n");
-			spin_lock(&udc->lock);
+				dev_err(ci->dev, "error: ep_set_halt\n");
+			spin_lock(&ci->lock);
 		}
 	}
 }
@@ -1015,7 +1015,7 @@ static int ep_enable(struct usb_ep *ep,
 	mEp->ep.desc = desc;
 
 	if (!list_empty(&mEp->qh.queue))
-		dev_warn(mEp->udc->dev, "enabling a non-empty endpoint!\n");
+		dev_warn(mEp->ci->dev, "enabling a non-empty endpoint!\n");
 
 	mEp->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
 	mEp->num  = usb_endpoint_num(desc);
@@ -1043,7 +1043,7 @@ static int ep_enable(struct usb_ep *ep,
 	 * is always enabled
 	 */
 	if (mEp->num)
-		retval |= hw_ep_enable(mEp->udc, mEp->num, mEp->dir, mEp->type);
+		retval |= hw_ep_enable(mEp->ci, mEp->num, mEp->dir, mEp->type);
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 	return retval;
@@ -1074,7 +1074,7 @@ static int ep_disable(struct usb_ep *ep)
 		dbg_event(_usb_addr(mEp), "DISABLE", 0);
 
 		retval |= _ep_nuke(mEp);
-		retval |= hw_ep_disable(mEp->udc, mEp->num, mEp->dir);
+		retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir);
 
 		if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
 			mEp->dir = (mEp->dir == TX) ? RX : TX;
@@ -1131,7 +1131,7 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
 	if (ep == NULL || req == NULL) {
 		return;
 	} else if (!list_empty(&mReq->queue)) {
-		dev_err(mEp->udc->dev, "freeing queued request\n");
+		dev_err(mEp->ci->dev, "freeing queued request\n");
 		return;
 	}
 
@@ -1156,7 +1156,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 {
 	struct ci13xxx_ep  *mEp  = container_of(ep,  struct ci13xxx_ep, ep);
 	struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req);
-	struct ci13xxx *udc = mEp->udc;
+	struct ci13xxx *ci = mEp->ci;
 	int retval = 0;
 	unsigned long flags;
 
@@ -1167,12 +1167,12 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 
 	if (mEp->type == USB_ENDPOINT_XFER_CONTROL) {
 		if (req->length)
-			mEp = (udc->ep0_dir == RX) ?
-			       udc->ep0out : udc->ep0in;
+			mEp = (ci->ep0_dir == RX) ?
+			       ci->ep0out : ci->ep0in;
 		if (!list_empty(&mEp->qh.queue)) {
 			_ep_nuke(mEp);
 			retval = -EOVERFLOW;
-			dev_warn(mEp->udc->dev, "endpoint ctrl %X nuked\n",
+			dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n",
 				 _usb_addr(mEp));
 		}
 	}
@@ -1180,14 +1180,14 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 	/* first nuke then test link, e.g. previous status has not sent */
 	if (!list_empty(&mReq->queue)) {
 		retval = -EBUSY;
-		dev_err(mEp->udc->dev, "request already in queue\n");
+		dev_err(mEp->ci->dev, "request already in queue\n");
 		goto done;
 	}
 
 	if (req->length > 4 * CI13XXX_PAGE_SIZE) {
 		req->length = 4 * CI13XXX_PAGE_SIZE;
 		retval = -EMSGSIZE;
-		dev_warn(mEp->udc->dev, "request length truncated\n");
+		dev_warn(mEp->ci->dev, "request length truncated\n");
 	}
 
 	dbg_queue(_usb_addr(mEp), req, retval);
@@ -1230,12 +1230,12 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 
 	dbg_event(_usb_addr(mEp), "DEQUEUE", 0);
 
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	/* pop request */
 	list_del_init(&mReq->queue);
 
-	usb_gadget_unmap_request(&mEp->udc->gadget, req, mEp->dir);
+	usb_gadget_unmap_request(&mEp->ci->gadget, req, mEp->dir);
 
 	req->status = -ECONNRESET;
 
@@ -1277,7 +1277,7 @@ static int ep_set_halt(struct usb_ep *ep, int value)
 	direction = mEp->dir;
 	do {
 		dbg_event(_usb_addr(mEp), "HALT", value);
-		retval |= hw_ep_set_halt(mEp->udc, mEp->num, mEp->dir, value);
+		retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value);
 
 		if (!value)
 			mEp->wedge = 0;
@@ -1325,14 +1325,14 @@ static void ep_fifo_flush(struct usb_ep *ep)
 	unsigned long flags;
 
 	if (ep == NULL) {
-		dev_err(mEp->udc->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
+		dev_err(mEp->ci->dev, "%02X: -EINVAL\n", _usb_addr(mEp));
 		return;
 	}
 
 	spin_lock_irqsave(mEp->lock, flags);
 
 	dbg_event(_usb_addr(mEp), "FFLUSH", 0);
-	hw_ep_flush(mEp->udc, mEp->num, mEp->dir);
+	hw_ep_flush(mEp->ci, mEp->num, mEp->dir);
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 }
@@ -1358,30 +1358,30 @@ static const struct usb_ep_ops usb_ep_ops = {
  *****************************************************************************/
 static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int gadget_ready = 0;
 
-	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
+	if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS))
 		return -EOPNOTSUPP;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	udc->vbus_active = is_active;
-	if (udc->driver)
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->vbus_active = is_active;
+	if (ci->driver)
 		gadget_ready = 1;
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	if (gadget_ready) {
 		if (is_active) {
 			pm_runtime_get_sync(&_gadget->dev);
-			hw_device_reset(udc, USBMODE_CM_DC);
-			hw_device_state(udc, udc->ep0out->qh.dma);
+			hw_device_reset(ci, USBMODE_CM_DC);
+			hw_device_state(ci, ci->ep0out->qh.dma);
 		} else {
-			hw_device_state(udc, 0);
-			if (udc->platdata->notify_event)
-				udc->platdata->notify_event(udc,
+			hw_device_state(ci, 0);
+			if (ci->platdata->notify_event)
+				ci->platdata->notify_event(ci,
 				CI13XXX_CONTROLLER_STOPPED_EVENT);
-			_gadget_stop_activity(&udc->gadget);
+			_gadget_stop_activity(&ci->gadget);
 			pm_runtime_put_sync(&_gadget->dev);
 		}
 	}
@@ -1391,31 +1391,31 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 
 static int ci13xxx_wakeup(struct usb_gadget *_gadget)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int ret = 0;
 
-	spin_lock_irqsave(&udc->lock, flags);
-	if (!udc->remote_wakeup) {
+	spin_lock_irqsave(&ci->lock, flags);
+	if (!ci->remote_wakeup) {
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
-	if (!hw_read(udc, OP_PORTSC, PORTSC_SUSP)) {
+	if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
 		ret = -EINVAL;
 		goto out;
 	}
-	hw_write(udc, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
+	hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
 out:
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 	return ret;
 }
 
 static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 {
-	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget);
 
-	if (udc->transceiver)
-		return usb_phy_set_power(udc->transceiver, mA);
+	if (ci->transceiver)
+		return usb_phy_set_power(ci->transceiver, mA);
 	return -ENOTSUPP;
 }
 
@@ -1436,28 +1436,28 @@ static const struct usb_gadget_ops usb_gadget_ops = {
 	.udc_stop	= ci13xxx_stop,
 };
 
-static int init_eps(struct ci13xxx *udc)
+static int init_eps(struct ci13xxx *ci)
 {
 	int retval = 0, i, j;
 
-	for (i = 0; i < udc->hw_ep_max/2; i++)
+	for (i = 0; i < ci->hw_ep_max/2; i++)
 		for (j = RX; j <= TX; j++) {
-			int k = i + j * udc->hw_ep_max/2;
-			struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k];
+			int k = i + j * ci->hw_ep_max/2;
+			struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[k];
 
 			scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i,
 					(j == TX)  ? "in" : "out");
 
-			mEp->udc          = udc;
-			mEp->lock         = &udc->lock;
-			mEp->td_pool      = udc->td_pool;
+			mEp->ci          = ci;
+			mEp->lock         = &ci->lock;
+			mEp->td_pool      = ci->td_pool;
 
 			mEp->ep.name      = mEp->name;
 			mEp->ep.ops       = &usb_ep_ops;
 			mEp->ep.maxpacket = CTRL_PAYLOAD_MAX;
 
 			INIT_LIST_HEAD(&mEp->qh.queue);
-			mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL,
+			mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
 						     &mEp->qh.dma);
 			if (mEp->qh.ptr == NULL)
 				retval = -ENOMEM;
@@ -1470,14 +1470,14 @@ static int init_eps(struct ci13xxx *udc)
 			 */
 			if (i == 0) {
 				if (j == RX)
-					udc->ep0out = mEp;
+					ci->ep0out = mEp;
 				else
-					udc->ep0in = mEp;
+					ci->ep0in = mEp;
 
 				continue;
 			}
 
-			list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list);
+			list_add_tail(&mEp->ep.ep_list, &ci->gadget.ep_list);
 		}
 
 	return retval;
@@ -1493,7 +1493,7 @@ static int init_eps(struct ci13xxx *udc)
 static int ci13xxx_start(struct usb_gadget *gadget,
 			 struct usb_gadget_driver *driver)
 {
-	struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 	int retval = -ENOMEM;
 
@@ -1501,35 +1501,35 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 		return -EINVAL;
 
 
-	udc->ep0out->ep.desc = &ctrl_endpt_out_desc;
-	retval = usb_ep_enable(&udc->ep0out->ep);
+	ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
+	retval = usb_ep_enable(&ci->ep0out->ep);
 	if (retval)
 		return retval;
 
-	udc->ep0in->ep.desc = &ctrl_endpt_in_desc;
-	retval = usb_ep_enable(&udc->ep0in->ep);
+	ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
+	retval = usb_ep_enable(&ci->ep0in->ep);
 	if (retval)
 		return retval;
-	spin_lock_irqsave(&udc->lock, flags);
-
-	udc->driver = driver;
-	pm_runtime_get_sync(&udc->gadget.dev);
-	if (udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
-		if (udc->vbus_active) {
-			if (udc->platdata->flags & CI13XXX_REGS_SHARED)
-				hw_device_reset(udc, USBMODE_CM_DC);
+	spin_lock_irqsave(&ci->lock, flags);
+
+	ci->driver = driver;
+	pm_runtime_get_sync(&ci->gadget.dev);
+	if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) {
+		if (ci->vbus_active) {
+			if (ci->platdata->flags & CI13XXX_REGS_SHARED)
+				hw_device_reset(ci, USBMODE_CM_DC);
 		} else {
-			pm_runtime_put_sync(&udc->gadget.dev);
+			pm_runtime_put_sync(&ci->gadget.dev);
 			goto done;
 		}
 	}
 
-	retval = hw_device_state(udc, udc->ep0out->qh.dma);
+	retval = hw_device_state(ci, ci->ep0out->qh.dma);
 	if (retval)
-		pm_runtime_put_sync(&udc->gadget.dev);
+		pm_runtime_put_sync(&ci->gadget.dev);
 
  done:
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 	return retval;
 }
 
@@ -1539,25 +1539,25 @@ static int ci13xxx_start(struct usb_gadget *gadget,
 static int ci13xxx_stop(struct usb_gadget *gadget,
 			struct usb_gadget_driver *driver)
 {
-	struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget);
+	struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget);
 	unsigned long flags;
 
-	spin_lock_irqsave(&udc->lock, flags);
+	spin_lock_irqsave(&ci->lock, flags);
 
-	if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
-			udc->vbus_active) {
-		hw_device_state(udc, 0);
-		if (udc->platdata->notify_event)
-			udc->platdata->notify_event(udc,
+	if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) ||
+			ci->vbus_active) {
+		hw_device_state(ci, 0);
+		if (ci->platdata->notify_event)
+			ci->platdata->notify_event(ci,
 			CI13XXX_CONTROLLER_STOPPED_EVENT);
-		udc->driver = NULL;
-		spin_unlock_irqrestore(&udc->lock, flags);
-		_gadget_stop_activity(&udc->gadget);
-		spin_lock_irqsave(&udc->lock, flags);
-		pm_runtime_put(&udc->gadget.dev);
+		ci->driver = NULL;
+		spin_unlock_irqrestore(&ci->lock, flags);
+		_gadget_stop_activity(&ci->gadget);
+		spin_lock_irqsave(&ci->lock, flags);
+		pm_runtime_put(&ci->gadget.dev);
 	}
 
-	spin_unlock_irqrestore(&udc->lock, flags);
+	spin_unlock_irqrestore(&ci->lock, flags);
 
 	return 0;
 }
@@ -1566,64 +1566,64 @@ static int ci13xxx_stop(struct usb_gadget *gadget,
  * BUS block
  *****************************************************************************/
 /**
- * udc_irq: udc interrupt handler
+ * udc_irq: ci interrupt handler
  *
  * This function returns IRQ_HANDLED if the IRQ has been handled
  * It locks access to registers
  */
-static irqreturn_t udc_irq(struct ci13xxx *udc)
+static irqreturn_t udc_irq(struct ci13xxx *ci)
 {
 	irqreturn_t retval;
 	u32 intr;
 
-	if (udc == NULL)
+	if (ci == NULL)
 		return IRQ_HANDLED;
 
-	spin_lock(&udc->lock);
+	spin_lock(&ci->lock);
 
-	if (udc->platdata->flags & CI13XXX_REGS_SHARED) {
-		if (hw_read(udc, OP_USBMODE, USBMODE_CM) !=
+	if (ci->platdata->flags & CI13XXX_REGS_SHARED) {
+		if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
 				USBMODE_CM_DC) {
-			spin_unlock(&udc->lock);
+			spin_unlock(&ci->lock);
 			return IRQ_NONE;
 		}
 	}
-	intr = hw_test_and_clear_intr_active(udc);
+	intr = hw_test_and_clear_intr_active(ci);
 	dbg_interrupt(intr);
 
 	if (intr) {
 		/* order defines priority - do NOT change it */
 		if (USBi_URI & intr)
-			isr_reset_handler(udc);
+			isr_reset_handler(ci);
 
 		if (USBi_PCI & intr) {
-			udc->gadget.speed = hw_port_is_high_speed(udc) ?
+			ci->gadget.speed = hw_port_is_high_speed(ci) ?
 				USB_SPEED_HIGH : USB_SPEED_FULL;
-			if (udc->suspended && udc->driver->resume) {
-				spin_unlock(&udc->lock);
-				udc->driver->resume(&udc->gadget);
-				spin_lock(&udc->lock);
-				udc->suspended = 0;
+			if (ci->suspended && ci->driver->resume) {
+				spin_unlock(&ci->lock);
+				ci->driver->resume(&ci->gadget);
+				spin_lock(&ci->lock);
+				ci->suspended = 0;
 			}
 		}
 
 		if (USBi_UI  & intr)
-			isr_tr_complete_handler(udc);
+			isr_tr_complete_handler(ci);
 
 		if (USBi_SLI & intr) {
-			if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
-			    udc->driver->suspend) {
-				udc->suspended = 1;
-				spin_unlock(&udc->lock);
-				udc->driver->suspend(&udc->gadget);
-				spin_lock(&udc->lock);
+			if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
+			    ci->driver->suspend) {
+				ci->suspended = 1;
+				spin_unlock(&ci->lock);
+				ci->driver->suspend(&ci->gadget);
+				spin_lock(&ci->lock);
 			}
 		}
 		retval = IRQ_HANDLED;
 	} else {
 		retval = IRQ_NONE;
 	}
-	spin_unlock(&udc->lock);
+	spin_unlock(&ci->lock);
 
 	return retval;
 }
@@ -1640,109 +1640,109 @@ static void udc_release(struct device *dev)
 
 /**
  * udc_start: initialize gadget role
- * @udc: chipidea controller
+ * @ci: chipidea controller
  */
-static int udc_start(struct ci13xxx *udc)
+static int udc_start(struct ci13xxx *ci)
 {
-	struct device *dev = udc->dev;
+	struct device *dev = ci->dev;
 	int retval = 0;
 
-	spin_lock_init(&udc->lock);
+	spin_lock_init(&ci->lock);
 
-	udc->gadget.ops          = &usb_gadget_ops;
-	udc->gadget.speed        = USB_SPEED_UNKNOWN;
-	udc->gadget.max_speed    = USB_SPEED_HIGH;
-	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = udc->platdata->name;
+	ci->gadget.ops          = &usb_gadget_ops;
+	ci->gadget.speed        = USB_SPEED_UNKNOWN;
+	ci->gadget.max_speed    = USB_SPEED_HIGH;
+	ci->gadget.is_otg       = 0;
+	ci->gadget.name         = ci->platdata->name;
 
-	INIT_LIST_HEAD(&udc->gadget.ep_list);
+	INIT_LIST_HEAD(&ci->gadget.ep_list);
 
-	dev_set_name(&udc->gadget.dev, "gadget");
-	udc->gadget.dev.dma_mask = dev->dma_mask;
-	udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
-	udc->gadget.dev.parent   = dev;
-	udc->gadget.dev.release  = udc_release;
+	dev_set_name(&ci->gadget.dev, "gadget");
+	ci->gadget.dev.dma_mask = dev->dma_mask;
+	ci->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
+	ci->gadget.dev.parent   = dev;
+	ci->gadget.dev.release  = udc_release;
 
 	/* alloc resources */
-	udc->qh_pool = dma_pool_create("ci13xxx_qh", dev,
+	ci->qh_pool = dma_pool_create("ci13xxx_qh", dev,
 				       sizeof(struct ci13xxx_qh),
 				       64, CI13XXX_PAGE_SIZE);
-	if (udc->qh_pool == NULL)
+	if (ci->qh_pool == NULL)
 		return -ENOMEM;
 
-	udc->td_pool = dma_pool_create("ci13xxx_td", dev,
+	ci->td_pool = dma_pool_create("ci13xxx_td", dev,
 				       sizeof(struct ci13xxx_td),
 				       64, CI13XXX_PAGE_SIZE);
-	if (udc->td_pool == NULL) {
+	if (ci->td_pool == NULL) {
 		retval = -ENOMEM;
 		goto free_qh_pool;
 	}
 
-	retval = init_eps(udc);
+	retval = init_eps(ci);
 	if (retval)
 		goto free_pools;
 
-	udc->gadget.ep0 = &udc->ep0in->ep;
+	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	udc->transceiver = usb_get_transceiver();
+	ci->transceiver = usb_get_transceiver();
 
-	if (udc->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
-		if (udc->transceiver == NULL) {
+	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+		if (ci->transceiver == NULL) {
 			retval = -ENODEV;
 			goto free_pools;
 		}
 	}
 
-	if (!(udc->platdata->flags & CI13XXX_REGS_SHARED)) {
-		retval = hw_device_reset(udc, USBMODE_CM_DC);
+	if (!(ci->platdata->flags & CI13XXX_REGS_SHARED)) {
+		retval = hw_device_reset(ci, USBMODE_CM_DC);
 		if (retval)
 			goto put_transceiver;
 	}
 
-	retval = device_register(&udc->gadget.dev);
+	retval = device_register(&ci->gadget.dev);
 	if (retval) {
-		put_device(&udc->gadget.dev);
+		put_device(&ci->gadget.dev);
 		goto put_transceiver;
 	}
 
-	retval = dbg_create_files(&udc->gadget.dev);
+	retval = dbg_create_files(&ci->gadget.dev);
 	if (retval)
 		goto unreg_device;
 
-	if (udc->transceiver) {
-		retval = otg_set_peripheral(udc->transceiver->otg,
-						&udc->gadget);
+	if (ci->transceiver) {
+		retval = otg_set_peripheral(ci->transceiver->otg,
+						&ci->gadget);
 		if (retval)
 			goto remove_dbg;
 	}
 
-	retval = usb_add_gadget_udc(dev, &udc->gadget);
+	retval = usb_add_gadget_udc(dev, &ci->gadget);
 	if (retval)
 		goto remove_trans;
 
-	pm_runtime_no_callbacks(&udc->gadget.dev);
-	pm_runtime_enable(&udc->gadget.dev);
+	pm_runtime_no_callbacks(&ci->gadget.dev);
+	pm_runtime_enable(&ci->gadget.dev);
 
 	return retval;
 
 remove_trans:
-	if (udc->transceiver) {
-		otg_set_peripheral(udc->transceiver->otg, &udc->gadget);
-		usb_put_transceiver(udc->transceiver);
+	if (ci->transceiver) {
+		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
+		usb_put_transceiver(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
 remove_dbg:
-	dbg_remove_files(&udc->gadget.dev);
+	dbg_remove_files(&ci->gadget.dev);
 unreg_device:
-	device_unregister(&udc->gadget.dev);
+	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (udc->transceiver)
-		usb_put_transceiver(udc->transceiver);
+	if (ci->transceiver)
+		usb_put_transceiver(ci->transceiver);
 free_pools:
-	dma_pool_destroy(udc->td_pool);
+	dma_pool_destroy(ci->td_pool);
 free_qh_pool:
-	dma_pool_destroy(udc->qh_pool);
+	dma_pool_destroy(ci->qh_pool);
 	return retval;
 }
 
@@ -1751,32 +1751,32 @@ free_qh_pool:
  *
  * No interrupts active, the IRQ has been released
  */
-static void udc_stop(struct ci13xxx *udc)
+static void udc_stop(struct ci13xxx *ci)
 {
 	int i;
 
-	if (udc == NULL)
+	if (ci == NULL)
 		return;
 
-	usb_del_gadget_udc(&udc->gadget);
+	usb_del_gadget_udc(&ci->gadget);
 
-	for (i = 0; i < udc->hw_ep_max; i++) {
-		struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i];
+	for (i = 0; i < ci->hw_ep_max; i++) {
+		struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i];
 
-		dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma);
+		dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma);
 	}
 
-	dma_pool_destroy(udc->td_pool);
-	dma_pool_destroy(udc->qh_pool);
+	dma_pool_destroy(ci->td_pool);
+	dma_pool_destroy(ci->qh_pool);
 
-	if (udc->transceiver) {
-		otg_set_peripheral(udc->transceiver->otg, NULL);
-		usb_put_transceiver(udc->transceiver);
+	if (ci->transceiver) {
+		otg_set_peripheral(ci->transceiver->otg, NULL);
+		usb_put_transceiver(ci->transceiver);
 	}
-	dbg_remove_files(&udc->gadget.dev);
-	device_unregister(&udc->gadget.dev);
+	dbg_remove_files(&ci->gadget.dev);
+	device_unregister(&ci->gadget.dev);
 	/* my kobject is dynamic, I swear! */
-	memset(&udc->gadget, 0, sizeof(udc->gadget));
+	memset(&ci->gadget, 0, sizeof(ci->gadget));
 }
 
 /**
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index d4cf9706..d2f7e49 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -19,7 +19,7 @@ struct ci13xxx_platform_data {
 
 #define CI13XXX_CONTROLLER_RESET_EVENT		0
 #define CI13XXX_CONTROLLER_STOPPED_EVENT	1
-	void	(*notify_event) (struct ci13xxx *udc, unsigned event);
+	void	(*notify_event) (struct ci13xxx *ci, unsigned event);
 };
 
 /* Default offset of capability registers */
-- 
1.7.9.5

[PATCH v6 07/14] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers

[Richard Zhao]

Platform drivers do the similar things to add/remove ci13xxx device, so
create a unified one.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/usb/chipidea/ci13xxx_msm.c |   34 ++++++----------------------
 drivers/usb/chipidea/ci13xxx_pci.c |   34 +++++-----------------------
 drivers/usb/chipidea/core.c        |   43 ++++++++++++++++++++++++++++++++++++
 include/linux/usb/chipidea.h       |    7 ++++++
 4 files changed, 63 insertions(+), 55 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index a7dd9f1..92bfe36 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -58,50 +58,30 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
 static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci;
-	int ret;
 
 	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
 
-	plat_ci = platform_device_alloc("ci_hdrc", -1);
-	if (!plat_ci) {
-		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
-		return -ENOMEM;
+	plat_ci = ci13xxx_add_device(&pdev->dev,
+				pdev->resource, pdev->num_resources,
+				&ci13xxx_msm_platdata);
+	if (IS_ERR(plat_ci)) {
+		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
+		return PTR_ERR(plat_ci);
 	}
 
-	ret = platform_device_add_resources(plat_ci, pdev->resource,
-					    pdev->num_resources);
-	if (ret) {
-		dev_err(&pdev->dev, "can't add resources to platform device\n");
-		goto put_platform;
-	}
-
-	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata,
-				       sizeof(ci13xxx_msm_platdata));
-	if (ret)
-		goto put_platform;
-
-	ret = platform_device_add(plat_ci);
-	if (ret)
-		goto put_platform;
-
 	platform_set_drvdata(pdev, plat_ci);
 
 	pm_runtime_no_callbacks(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	return 0;
-
-put_platform:
-	platform_device_put(plat_ci);
-
-	return ret;
 }
 
 static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci = platform_get_drvdata(pdev);
 
-	platform_device_unregister(plat_ci);
+	ci13xxx_remove_device(plat_ci);
 
 	return 0;
 }
diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
index cdcac3a..918e149 100644
--- a/drivers/usb/chipidea/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci13xxx_pci.c
@@ -75,13 +75,6 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
-	plat_ci = platform_device_alloc("ci_hdrc", -1);
-	if (!plat_ci) {
-		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
-		retval = -ENOMEM;
-		goto disable_device;
-	}
-
 	memset(res, 0, sizeof(res));
 	res[0].start	= pci_resource_start(pdev, 0);
 	res[0].end	= pci_resource_end(pdev, 0);
@@ -89,32 +82,17 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 	res[1].start	= pdev->irq;
 	res[1].flags	= IORESOURCE_IRQ;
 
-	retval = platform_device_add_resources(plat_ci, res, nres);
-	if (retval) {
-		dev_err(&pdev->dev, "can't add resources to platform device\n");
-		goto put_platform;
+	plat_ci = ci13xxx_add_device(&pdev->dev, res, nres, platdata);
+	if (IS_ERR(plat_ci)) {
+		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
+		retval = PTR_ERR(plat_ci);
+		goto disable_device;
 	}
 
-	retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata));
-	if (retval)
-		goto put_platform;
-
-	dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask);
-	plat_ci->dev.dma_mask = pdev->dev.dma_mask;
-	plat_ci->dev.dma_parms = pdev->dev.dma_parms;
-	plat_ci->dev.parent = &pdev->dev;
-
 	pci_set_drvdata(pdev, plat_ci);
 
-	retval = platform_device_add(plat_ci);
-	if (retval)
-		goto put_platform;
-
 	return 0;
 
- put_platform:
-	pci_set_drvdata(pdev, NULL);
-	platform_device_put(plat_ci);
  disable_device:
 	pci_disable_device(pdev);
  done:
@@ -133,7 +111,7 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
 {
 	struct platform_device *plat_ci = pci_get_drvdata(pdev);
 
-	platform_device_unregister(plat_ci);
+	ci13xxx_remove_device(plat_ci);
 	pci_set_drvdata(pdev, NULL);
 	pci_disable_device(pdev);
 }
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 9a883bd..8eccd1b 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -332,6 +332,49 @@ static irqreturn_t ci_irq(int irq, void *data)
 	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
 }
 
+struct platform_device *ci13xxx_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci13xxx_platform_data *platdata)
+{
+	struct platform_device *pdev;
+	int ret;
+
+	/* FIXME: find a way to choose id */
+	pdev = platform_device_alloc("ci_hdrc", -1);
+	if (!pdev)
+		return ERR_PTR(-ENOMEM);
+
+	pdev->dev.parent = dev;
+	pdev->dev.dma_mask = dev->dma_mask;
+	pdev->dev.dma_parms = dev->dma_parms;
+	dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
+
+	ret = platform_device_add_resources(pdev, res, nres);
+	if (ret)
+		goto err;
+
+	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto err;
+
+	return pdev;
+
+err:
+	platform_device_put(pdev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(ci13xxx_add_device);
+
+void ci13xxx_remove_device(struct platform_device *pdev)
+{
+	platform_device_put(pdev);
+}
+EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
+
 static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index d2f7e49..be078f0 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -25,4 +25,11 @@ struct ci13xxx_platform_data {
 /* Default offset of capability registers */
 #define DEF_CAPOFFSET		0x100
 
+/* Add ci13xxx device */
+struct platform_device *ci13xxx_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci13xxx_platform_data *platdata);
+/* Remove ci13xxx device */
+void ci13xxx_remove_device(struct platform_device *pdev);
+
 #endif
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 07/14] USB: Chipidea: add unified ci13xxx_{add, remove}_device for platform drivers

[Richard Zhao]

Platform drivers do the similar things to add/remove ci13xxx device, so
create a unified one.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/ci13xxx_msm.c |   34 ++++++----------------------
 drivers/usb/chipidea/ci13xxx_pci.c |   34 +++++-----------------------
 drivers/usb/chipidea/core.c        |   43 ++++++++++++++++++++++++++++++++++++
 include/linux/usb/chipidea.h       |    7 ++++++
 4 files changed, 63 insertions(+), 55 deletions(-)

diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
index a7dd9f1..92bfe36 100644
--- a/drivers/usb/chipidea/ci13xxx_msm.c
+++ b/drivers/usb/chipidea/ci13xxx_msm.c
@@ -58,50 +58,30 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
 static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci;
-	int ret;
 
 	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
 
-	plat_ci = platform_device_alloc("ci_hdrc", -1);
-	if (!plat_ci) {
-		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
-		return -ENOMEM;
+	plat_ci = ci13xxx_add_device(&pdev->dev,
+				pdev->resource, pdev->num_resources,
+				&ci13xxx_msm_platdata);
+	if (IS_ERR(plat_ci)) {
+		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
+		return PTR_ERR(plat_ci);
 	}
 
-	ret = platform_device_add_resources(plat_ci, pdev->resource,
-					    pdev->num_resources);
-	if (ret) {
-		dev_err(&pdev->dev, "can't add resources to platform device\n");
-		goto put_platform;
-	}
-
-	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata,
-				       sizeof(ci13xxx_msm_platdata));
-	if (ret)
-		goto put_platform;
-
-	ret = platform_device_add(plat_ci);
-	if (ret)
-		goto put_platform;
-
 	platform_set_drvdata(pdev, plat_ci);
 
 	pm_runtime_no_callbacks(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 
 	return 0;
-
-put_platform:
-	platform_device_put(plat_ci);
-
-	return ret;
 }
 
 static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
 {
 	struct platform_device *plat_ci = platform_get_drvdata(pdev);
 
-	platform_device_unregister(plat_ci);
+	ci13xxx_remove_device(plat_ci);
 
 	return 0;
 }
diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
index cdcac3a..918e149 100644
--- a/drivers/usb/chipidea/ci13xxx_pci.c
+++ b/drivers/usb/chipidea/ci13xxx_pci.c
@@ -75,13 +75,6 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
-	plat_ci = platform_device_alloc("ci_hdrc", -1);
-	if (!plat_ci) {
-		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
-		retval = -ENOMEM;
-		goto disable_device;
-	}
-
 	memset(res, 0, sizeof(res));
 	res[0].start	= pci_resource_start(pdev, 0);
 	res[0].end	= pci_resource_end(pdev, 0);
@@ -89,32 +82,17 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
 	res[1].start	= pdev->irq;
 	res[1].flags	= IORESOURCE_IRQ;
 
-	retval = platform_device_add_resources(plat_ci, res, nres);
-	if (retval) {
-		dev_err(&pdev->dev, "can't add resources to platform device\n");
-		goto put_platform;
+	plat_ci = ci13xxx_add_device(&pdev->dev, res, nres, platdata);
+	if (IS_ERR(plat_ci)) {
+		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
+		retval = PTR_ERR(plat_ci);
+		goto disable_device;
 	}
 
-	retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata));
-	if (retval)
-		goto put_platform;
-
-	dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask);
-	plat_ci->dev.dma_mask = pdev->dev.dma_mask;
-	plat_ci->dev.dma_parms = pdev->dev.dma_parms;
-	plat_ci->dev.parent = &pdev->dev;
-
 	pci_set_drvdata(pdev, plat_ci);
 
-	retval = platform_device_add(plat_ci);
-	if (retval)
-		goto put_platform;
-
 	return 0;
 
- put_platform:
-	pci_set_drvdata(pdev, NULL);
-	platform_device_put(plat_ci);
  disable_device:
 	pci_disable_device(pdev);
  done:
@@ -133,7 +111,7 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
 {
 	struct platform_device *plat_ci = pci_get_drvdata(pdev);
 
-	platform_device_unregister(plat_ci);
+	ci13xxx_remove_device(plat_ci);
 	pci_set_drvdata(pdev, NULL);
 	pci_disable_device(pdev);
 }
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 9a883bd..8eccd1b 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -332,6 +332,49 @@ static irqreturn_t ci_irq(int irq, void *data)
 	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
 }
 
+struct platform_device *ci13xxx_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci13xxx_platform_data *platdata)
+{
+	struct platform_device *pdev;
+	int ret;
+
+	/* FIXME: find a way to choose id */
+	pdev = platform_device_alloc("ci_hdrc", -1);
+	if (!pdev)
+		return ERR_PTR(-ENOMEM);
+
+	pdev->dev.parent = dev;
+	pdev->dev.dma_mask = dev->dma_mask;
+	pdev->dev.dma_parms = dev->dma_parms;
+	dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
+
+	ret = platform_device_add_resources(pdev, res, nres);
+	if (ret)
+		goto err;
+
+	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
+	if (ret)
+		goto err;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto err;
+
+	return pdev;
+
+err:
+	platform_device_put(pdev);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(ci13xxx_add_device);
+
+void ci13xxx_remove_device(struct platform_device *pdev)
+{
+	platform_device_put(pdev);
+}
+EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
+
 static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index d2f7e49..be078f0 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -25,4 +25,11 @@ struct ci13xxx_platform_data {
 /* Default offset of capability registers */
 #define DEF_CAPOFFSET		0x100
 
+/* Add ci13xxx device */
+struct platform_device *ci13xxx_add_device(struct device *dev,
+			struct resource *res, int nres,
+			struct ci13xxx_platform_data *platdata);
+/* Remove ci13xxx device */
+void ci13xxx_remove_device(struct platform_device *pdev);
+
 #endif
-- 
1.7.9.5

Re: [PATCH v6 07/14] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers

[Richard Zhao]

On Thu, Jun 21, 2012 at 02:41:08PM +0800, Richard Zhao wrote:
> Platform drivers do the similar things to add/remove ci13xxx device, so
> create a unified one.
> 
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
> Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> ---
>  drivers/usb/chipidea/ci13xxx_msm.c |   34 ++++++----------------------
>  drivers/usb/chipidea/ci13xxx_pci.c |   34 +++++-----------------------
>  drivers/usb/chipidea/core.c        |   43 ++++++++++++++++++++++++++++++++++++
>  include/linux/usb/chipidea.h       |    7 ++++++
>  4 files changed, 63 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
> index a7dd9f1..92bfe36 100644
> --- a/drivers/usb/chipidea/ci13xxx_msm.c
> +++ b/drivers/usb/chipidea/ci13xxx_msm.c
> @@ -58,50 +58,30 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
>  static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
>  {
>  	struct platform_device *plat_ci;
> -	int ret;
>  
>  	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
>  
> -	plat_ci = platform_device_alloc("ci_hdrc", -1);
> -	if (!plat_ci) {
> -		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
> -		return -ENOMEM;
> +	plat_ci = ci13xxx_add_device(&pdev->dev,
> +				pdev->resource, pdev->num_resources,
> +				&ci13xxx_msm_platdata);
> +	if (IS_ERR(plat_ci)) {
> +		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
> +		return PTR_ERR(plat_ci);
>  	}
>  
> -	ret = platform_device_add_resources(plat_ci, pdev->resource,
> -					    pdev->num_resources);
> -	if (ret) {
> -		dev_err(&pdev->dev, "can't add resources to platform device\n");
> -		goto put_platform;
> -	}
> -
> -	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata,
> -				       sizeof(ci13xxx_msm_platdata));
> -	if (ret)
> -		goto put_platform;
> -
> -	ret = platform_device_add(plat_ci);
> -	if (ret)
> -		goto put_platform;
> -
>  	platform_set_drvdata(pdev, plat_ci);
>  
>  	pm_runtime_no_callbacks(&pdev->dev);
>  	pm_runtime_enable(&pdev->dev);
>  
>  	return 0;
> -
> -put_platform:
> -	platform_device_put(plat_ci);
> -
> -	return ret;
>  }
>  
>  static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
>  {
>  	struct platform_device *plat_ci = platform_get_drvdata(pdev);
>  
> -	platform_device_unregister(plat_ci);
> +	ci13xxx_remove_device(plat_ci);
>  
>  	return 0;
>  }
> diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
> index cdcac3a..918e149 100644
> --- a/drivers/usb/chipidea/ci13xxx_pci.c
> +++ b/drivers/usb/chipidea/ci13xxx_pci.c
> @@ -75,13 +75,6 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
>  	pci_set_master(pdev);
>  	pci_try_set_mwi(pdev);
>  
> -	plat_ci = platform_device_alloc("ci_hdrc", -1);
> -	if (!plat_ci) {
> -		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
> -		retval = -ENOMEM;
> -		goto disable_device;
> -	}
> -
>  	memset(res, 0, sizeof(res));
>  	res[0].start	= pci_resource_start(pdev, 0);
>  	res[0].end	= pci_resource_end(pdev, 0);
> @@ -89,32 +82,17 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
>  	res[1].start	= pdev->irq;
>  	res[1].flags	= IORESOURCE_IRQ;
>  
> -	retval = platform_device_add_resources(plat_ci, res, nres);
> -	if (retval) {
> -		dev_err(&pdev->dev, "can't add resources to platform device\n");
> -		goto put_platform;
> +	plat_ci = ci13xxx_add_device(&pdev->dev, res, nres, platdata);
> +	if (IS_ERR(plat_ci)) {
> +		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
> +		retval = PTR_ERR(plat_ci);
> +		goto disable_device;
>  	}
>  
> -	retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata));
> -	if (retval)
> -		goto put_platform;
> -
> -	dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask);
> -	plat_ci->dev.dma_mask = pdev->dev.dma_mask;
> -	plat_ci->dev.dma_parms = pdev->dev.dma_parms;
> -	plat_ci->dev.parent = &pdev->dev;
> -
>  	pci_set_drvdata(pdev, plat_ci);
>  
> -	retval = platform_device_add(plat_ci);
> -	if (retval)
> -		goto put_platform;
> -
>  	return 0;
>  
> - put_platform:
> -	pci_set_drvdata(pdev, NULL);
> -	platform_device_put(plat_ci);
>   disable_device:
>  	pci_disable_device(pdev);
>   done:
> @@ -133,7 +111,7 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
>  {
>  	struct platform_device *plat_ci = pci_get_drvdata(pdev);
>  
> -	platform_device_unregister(plat_ci);
> +	ci13xxx_remove_device(plat_ci);
>  	pci_set_drvdata(pdev, NULL);
>  	pci_disable_device(pdev);
>  }
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 9a883bd..8eccd1b 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -332,6 +332,49 @@ static irqreturn_t ci_irq(int irq, void *data)
>  	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
>  }
>  
> +struct platform_device *ci13xxx_add_device(struct device *dev,
> +			struct resource *res, int nres,
> +			struct ci13xxx_platform_data *platdata)
> +{
> +	struct platform_device *pdev;
> +	int ret;
> +
> +	/* FIXME: find a way to choose id */
> +	pdev = platform_device_alloc("ci_hdrc", -1);
> +	if (!pdev)
> +		return ERR_PTR(-ENOMEM);
> +
> +	pdev->dev.parent = dev;
> +	pdev->dev.dma_mask = dev->dma_mask;
> +	pdev->dev.dma_parms = dev->dma_parms;
> +	dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
> +
> +	ret = platform_device_add_resources(pdev, res, nres);
> +	if (ret)
> +		goto err;
> +
> +	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
> +	if (ret)
> +		goto err;
> +
> +	ret = platform_device_add(pdev);
> +	if (ret)
> +		goto err;
> +
> +	return pdev;
> +
> +err:
> +	platform_device_put(pdev);
> +	return ERR_PTR(ret);
> +}
> +EXPORT_SYMBOL_GPL(ci13xxx_add_device);
> +
> +void ci13xxx_remove_device(struct platform_device *pdev)
> +{
> +	platform_device_put(pdev);
It's supposed to be
	platform_device_unregister(pdev);

Thanks
Richard
> +}
> +EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
 

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 07/14] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers

[Richard Zhao]

On Thu, Jun 21, 2012 at 02:41:08PM +0800, Richard Zhao wrote:
> Platform drivers do the similar things to add/remove ci13xxx device, so
> create a unified one.
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> Reviewed-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
> ---
>  drivers/usb/chipidea/ci13xxx_msm.c |   34 ++++++----------------------
>  drivers/usb/chipidea/ci13xxx_pci.c |   34 +++++-----------------------
>  drivers/usb/chipidea/core.c        |   43 ++++++++++++++++++++++++++++++++++++
>  include/linux/usb/chipidea.h       |    7 ++++++
>  4 files changed, 63 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c
> index a7dd9f1..92bfe36 100644
> --- a/drivers/usb/chipidea/ci13xxx_msm.c
> +++ b/drivers/usb/chipidea/ci13xxx_msm.c
> @@ -58,50 +58,30 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = {
>  static int __devinit ci13xxx_msm_probe(struct platform_device *pdev)
>  {
>  	struct platform_device *plat_ci;
> -	int ret;
>  
>  	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
>  
> -	plat_ci = platform_device_alloc("ci_hdrc", -1);
> -	if (!plat_ci) {
> -		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
> -		return -ENOMEM;
> +	plat_ci = ci13xxx_add_device(&pdev->dev,
> +				pdev->resource, pdev->num_resources,
> +				&ci13xxx_msm_platdata);
> +	if (IS_ERR(plat_ci)) {
> +		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
> +		return PTR_ERR(plat_ci);
>  	}
>  
> -	ret = platform_device_add_resources(plat_ci, pdev->resource,
> -					    pdev->num_resources);
> -	if (ret) {
> -		dev_err(&pdev->dev, "can't add resources to platform device\n");
> -		goto put_platform;
> -	}
> -
> -	ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata,
> -				       sizeof(ci13xxx_msm_platdata));
> -	if (ret)
> -		goto put_platform;
> -
> -	ret = platform_device_add(plat_ci);
> -	if (ret)
> -		goto put_platform;
> -
>  	platform_set_drvdata(pdev, plat_ci);
>  
>  	pm_runtime_no_callbacks(&pdev->dev);
>  	pm_runtime_enable(&pdev->dev);
>  
>  	return 0;
> -
> -put_platform:
> -	platform_device_put(plat_ci);
> -
> -	return ret;
>  }
>  
>  static int __devexit ci13xxx_msm_remove(struct platform_device *pdev)
>  {
>  	struct platform_device *plat_ci = platform_get_drvdata(pdev);
>  
> -	platform_device_unregister(plat_ci);
> +	ci13xxx_remove_device(plat_ci);
>  
>  	return 0;
>  }
> diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c
> index cdcac3a..918e149 100644
> --- a/drivers/usb/chipidea/ci13xxx_pci.c
> +++ b/drivers/usb/chipidea/ci13xxx_pci.c
> @@ -75,13 +75,6 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
>  	pci_set_master(pdev);
>  	pci_try_set_mwi(pdev);
>  
> -	plat_ci = platform_device_alloc("ci_hdrc", -1);
> -	if (!plat_ci) {
> -		dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n");
> -		retval = -ENOMEM;
> -		goto disable_device;
> -	}
> -
>  	memset(res, 0, sizeof(res));
>  	res[0].start	= pci_resource_start(pdev, 0);
>  	res[0].end	= pci_resource_end(pdev, 0);
> @@ -89,32 +82,17 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
>  	res[1].start	= pdev->irq;
>  	res[1].flags	= IORESOURCE_IRQ;
>  
> -	retval = platform_device_add_resources(plat_ci, res, nres);
> -	if (retval) {
> -		dev_err(&pdev->dev, "can't add resources to platform device\n");
> -		goto put_platform;
> +	plat_ci = ci13xxx_add_device(&pdev->dev, res, nres, platdata);
> +	if (IS_ERR(plat_ci)) {
> +		dev_err(&pdev->dev, "ci13xxx_add_device failed!\n");
> +		retval = PTR_ERR(plat_ci);
> +		goto disable_device;
>  	}
>  
> -	retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata));
> -	if (retval)
> -		goto put_platform;
> -
> -	dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask);
> -	plat_ci->dev.dma_mask = pdev->dev.dma_mask;
> -	plat_ci->dev.dma_parms = pdev->dev.dma_parms;
> -	plat_ci->dev.parent = &pdev->dev;
> -
>  	pci_set_drvdata(pdev, plat_ci);
>  
> -	retval = platform_device_add(plat_ci);
> -	if (retval)
> -		goto put_platform;
> -
>  	return 0;
>  
> - put_platform:
> -	pci_set_drvdata(pdev, NULL);
> -	platform_device_put(plat_ci);
>   disable_device:
>  	pci_disable_device(pdev);
>   done:
> @@ -133,7 +111,7 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
>  {
>  	struct platform_device *plat_ci = pci_get_drvdata(pdev);
>  
> -	platform_device_unregister(plat_ci);
> +	ci13xxx_remove_device(plat_ci);
>  	pci_set_drvdata(pdev, NULL);
>  	pci_disable_device(pdev);
>  }
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 9a883bd..8eccd1b 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -332,6 +332,49 @@ static irqreturn_t ci_irq(int irq, void *data)
>  	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
>  }
>  
> +struct platform_device *ci13xxx_add_device(struct device *dev,
> +			struct resource *res, int nres,
> +			struct ci13xxx_platform_data *platdata)
> +{
> +	struct platform_device *pdev;
> +	int ret;
> +
> +	/* FIXME: find a way to choose id */
> +	pdev = platform_device_alloc("ci_hdrc", -1);
> +	if (!pdev)
> +		return ERR_PTR(-ENOMEM);
> +
> +	pdev->dev.parent = dev;
> +	pdev->dev.dma_mask = dev->dma_mask;
> +	pdev->dev.dma_parms = dev->dma_parms;
> +	dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
> +
> +	ret = platform_device_add_resources(pdev, res, nres);
> +	if (ret)
> +		goto err;
> +
> +	ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
> +	if (ret)
> +		goto err;
> +
> +	ret = platform_device_add(pdev);
> +	if (ret)
> +		goto err;
> +
> +	return pdev;
> +
> +err:
> +	platform_device_put(pdev);
> +	return ERR_PTR(ret);
> +}
> +EXPORT_SYMBOL_GPL(ci13xxx_add_device);
> +
> +void ci13xxx_remove_device(struct platform_device *pdev)
> +{
> +	platform_device_put(pdev);
It's supposed to be
	platform_device_unregister(pdev);

Thanks
Richard
> +}
> +EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
 

[PATCH v6 08/14] USB: Chipidea: add ci13xxx device id management

[Richard Zhao]

We use ida_simple_get and ida_simple_remove to manage the ids.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/usb/chipidea/core.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 8eccd1b..c14ce2b 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -56,6 +56,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/idr.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -332,17 +333,24 @@ static irqreturn_t ci_irq(int irq, void *data)
 	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
 }
 
+static DEFINE_IDA(ci_ida);
+
 struct platform_device *ci13xxx_add_device(struct device *dev,
 			struct resource *res, int nres,
 			struct ci13xxx_platform_data *platdata)
 {
 	struct platform_device *pdev;
-	int ret;
+	int id, ret;
 
-	/* FIXME: find a way to choose id */
-	pdev = platform_device_alloc("ci_hdrc", -1);
-	if (!pdev)
-		return ERR_PTR(-ENOMEM);
+	id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
+	if (id < 0)
+		return ERR_PTR(id);
+
+	pdev = platform_device_alloc("ci_hdrc", id);
+	if (!pdev) {
+		ret = -ENOMEM;
+		goto put_id;
+	}
 
 	pdev->dev.parent = dev;
 	pdev->dev.dma_mask = dev->dma_mask;
@@ -365,12 +373,15 @@ struct platform_device *ci13xxx_add_device(struct device *dev,
 
 err:
 	platform_device_put(pdev);
+put_id:
+	ida_simple_remove(&ci_ida, id);
 	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(ci13xxx_add_device);
 
 void ci13xxx_remove_device(struct platform_device *pdev)
 {
+	ida_simple_remove(&ci_ida, pdev->id);
 	platform_device_put(pdev);
 }
 EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 08/14] USB: Chipidea: add ci13xxx device id management

[Richard Zhao]

We use ida_simple_get and ida_simple_remove to manage the ids.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/core.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 8eccd1b..c14ce2b 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -56,6 +56,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/idr.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -332,17 +333,24 @@ static irqreturn_t ci_irq(int irq, void *data)
 	return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci);
 }
 
+static DEFINE_IDA(ci_ida);
+
 struct platform_device *ci13xxx_add_device(struct device *dev,
 			struct resource *res, int nres,
 			struct ci13xxx_platform_data *platdata)
 {
 	struct platform_device *pdev;
-	int ret;
+	int id, ret;
 
-	/* FIXME: find a way to choose id */
-	pdev = platform_device_alloc("ci_hdrc", -1);
-	if (!pdev)
-		return ERR_PTR(-ENOMEM);
+	id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
+	if (id < 0)
+		return ERR_PTR(id);
+
+	pdev = platform_device_alloc("ci_hdrc", id);
+	if (!pdev) {
+		ret = -ENOMEM;
+		goto put_id;
+	}
 
 	pdev->dev.parent = dev;
 	pdev->dev.dma_mask = dev->dma_mask;
@@ -365,12 +373,15 @@ struct platform_device *ci13xxx_add_device(struct device *dev,
 
 err:
 	platform_device_put(pdev);
+put_id:
+	ida_simple_remove(&ci_ida, id);
 	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(ci13xxx_add_device);
 
 void ci13xxx_remove_device(struct platform_device *pdev)
 {
+	ida_simple_remove(&ci_ida, pdev->id);
 	platform_device_put(pdev);
 }
 EXPORT_SYMBOL_GPL(ci13xxx_remove_device);
-- 
1.7.9.5

[PATCH v6 09/14] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig

[Richard Zhao]

ci13xxx host needs Root Hub Transaction Translators.

Reported-by: Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
 drivers/usb/chipidea/Kconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index fd36dc8..8337fb5 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC
 
 config USB_CHIPIDEA_HOST
 	bool "ChipIdea host controller"
+	select USB_EHCI_ROOT_HUB_TT
 	help
 	  Say Y here to enable host controller functionality of the
 	  ChipIdea driver.
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 09/14] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig

[Richard Zhao]

ci13xxx host needs Root Hub Transaction Translators.

Reported-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
---
 drivers/usb/chipidea/Kconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index fd36dc8..8337fb5 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC
 
 config USB_CHIPIDEA_HOST
 	bool "ChipIdea host controller"
+	select USB_EHCI_ROOT_HUB_TT
 	help
 	  Say Y here to enable host controller functionality of the
 	  ChipIdea driver.
-- 
1.7.9.5

[PATCH v6 10/14] usb: otg: add notify_connect/notify_disconnect callback

[Richard Zhao]

This let usb phy driver has a chance to change hw settings when connect
status change.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org>
---
 include/linux/usb/otg.h |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 38ab3f4..6dfdc8d 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -117,6 +117,9 @@ struct usb_phy {
 	int	(*set_suspend)(struct usb_phy *x,
 				int suspend);
 
+	/* notify phy connect status change */
+	int	(*notify_connect)(struct usb_phy *x, int port);
+	int	(*notify_disconnect)(struct usb_phy *x, int port);
 };
 
 
@@ -252,6 +255,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend)
 }
 
 static inline int
+usb_phy_notify_connect(struct usb_phy *x, int port)
+{
+	if (x->notify_connect)
+		return x->notify_connect(x, port);
+	else
+		return 0;
+}
+
+static inline int
+usb_phy_notify_disconnect(struct usb_phy *x, int port)
+{
+	if (x->notify_disconnect)
+		return x->notify_disconnect(x, port);
+	else
+		return 0;
+}
+
+static inline int
 otg_start_srp(struct usb_otg *otg)
 {
 	if (otg && otg->start_srp)
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 10/14] usb: otg: add notify_connect/notify_disconnect callback

[Richard Zhao]

This let usb phy driver has a chance to change hw settings when connect
status change.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 include/linux/usb/otg.h |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 38ab3f4..6dfdc8d 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -117,6 +117,9 @@ struct usb_phy {
 	int	(*set_suspend)(struct usb_phy *x,
 				int suspend);
 
+	/* notify phy connect status change */
+	int	(*notify_connect)(struct usb_phy *x, int port);
+	int	(*notify_disconnect)(struct usb_phy *x, int port);
 };
 
 
@@ -252,6 +255,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend)
 }
 
 static inline int
+usb_phy_notify_connect(struct usb_phy *x, int port)
+{
+	if (x->notify_connect)
+		return x->notify_connect(x, port);
+	else
+		return 0;
+}
+
+static inline int
+usb_phy_notify_disconnect(struct usb_phy *x, int port)
+{
+	if (x->notify_disconnect)
+		return x->notify_disconnect(x, port);
+	else
+		return 0;
+}
+
+static inline int
 otg_start_srp(struct usb_otg *otg)
 {
 	if (otg && otg->start_srp)
-- 
1.7.9.5

[PATCH v6 11/14] USB: notify phy when root hub port connect change

[Richard Zhao]

Phy may need to change settings when port connect change.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org>
---
 drivers/usb/core/hub.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 25a7422..6ecfb5e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -20,6 +20,7 @@
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
 #include <linux/usb/quirks.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
@@ -4034,6 +4035,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		}
 	}
 
+	if (unlikely(hcd->phy && !hdev->parent)) {
+		if (portstatus & USB_PORT_STAT_CONNECTION)
+			usb_phy_notify_connect(hcd->phy, port1);
+		else
+			usb_phy_notify_disconnect(hcd->phy, port1);
+	}
+
 	/* Return now if debouncing failed or nothing is connected or
 	 * the device was "removed".
 	 */
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 11/14] USB: notify phy when root hub port connect change

[Richard Zhao]

Phy may need to change settings when port connect change.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 drivers/usb/core/hub.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 25a7422..6ecfb5e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -20,6 +20,7 @@
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>
+#include <linux/usb/otg.h>
 #include <linux/usb/quirks.h>
 #include <linux/kthread.h>
 #include <linux/mutex.h>
@@ -4034,6 +4035,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		}
 	}
 
+	if (unlikely(hcd->phy && !hdev->parent)) {
+		if (portstatus & USB_PORT_STAT_CONNECTION)
+			usb_phy_notify_connect(hcd->phy, port1);
+		else
+			usb_phy_notify_disconnect(hcd->phy, port1);
+	}
+
 	/* Return now if debouncing failed or nothing is connected or
 	 * the device was "removed".
 	 */
-- 
1.7.9.5

[PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Reviewed-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org>
---
 drivers/usb/chipidea/ci.h    |    2 ++
 drivers/usb/chipidea/core.c  |    4 ++++
 drivers/usb/chipidea/host.c  |    1 +
 drivers/usb/chipidea/udc.c   |   11 +++++++----
 include/linux/usb/chipidea.h |    3 +++
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 9655e35..d738603 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -160,6 +160,8 @@ struct ci13xxx {
 
 	struct ci13xxx_platform_data	*platdata;
 	int				vbus_active;
+	/* FIXME: some day, we'll not use global phy */
+	bool				global_phy;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index c14ce2b..21407e7 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -419,6 +419,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 
 	ci->dev = dev;
 	ci->platdata = dev->platform_data;
+	if (ci->platdata->phy)
+		ci->transceiver = ci->platdata->phy;
+	else
+		ci->global_phy = true;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 4a4fdb8..ebff9f4 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -117,6 +117,7 @@ static int host_start(struct ci13xxx *ci)
 	hcd->has_tt = 1;
 
 	hcd->power_budget = ci->platdata->power_budget;
+	hcd->phy = ci->transceiver;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ca9b387..b43b29c 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
 
 	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	ci->transceiver = usb_get_transceiver();
+	if (ci->global_phy) {
+		ci->transceiver = usb_get_transceiver();
 
 	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (ci->transceiver == NULL) {
@@ -1728,7 +1729,8 @@ static int udc_start(struct ci13xxx *ci)
 remove_trans:
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
@@ -1737,7 +1739,7 @@ remove_dbg:
 unreg_device:
 	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (ci->transceiver)
+	if (ci->transceiver && ci->global_phy)
 		usb_put_transceiver(ci->transceiver);
 free_pools:
 	dma_pool_destroy(ci->td_pool);
@@ -1771,7 +1773,8 @@ static void udc_stop(struct ci13xxx *ci)
 
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, NULL);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 	dbg_remove_files(&ci->gadget.dev);
 	device_unregister(&ci->gadget.dev);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index be078f0..544825d 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
 #ifndef __LINUX_USB_CHIPIDEA_H
 #define __LINUX_USB_CHIPIDEA_H
 
+#include <linux/usb/otg.h>
+
 struct ci13xxx;
 struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
+	struct usb_phy	*phy;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 drivers/usb/chipidea/ci.h    |    2 ++
 drivers/usb/chipidea/core.c  |    4 ++++
 drivers/usb/chipidea/host.c  |    1 +
 drivers/usb/chipidea/udc.c   |   11 +++++++----
 include/linux/usb/chipidea.h |    3 +++
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 9655e35..d738603 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -160,6 +160,8 @@ struct ci13xxx {
 
 	struct ci13xxx_platform_data	*platdata;
 	int				vbus_active;
+	/* FIXME: some day, we'll not use global phy */
+	bool				global_phy;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index c14ce2b..21407e7 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -419,6 +419,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 
 	ci->dev = dev;
 	ci->platdata = dev->platform_data;
+	if (ci->platdata->phy)
+		ci->transceiver = ci->platdata->phy;
+	else
+		ci->global_phy = true;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 4a4fdb8..ebff9f4 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -117,6 +117,7 @@ static int host_start(struct ci13xxx *ci)
 	hcd->has_tt = 1;
 
 	hcd->power_budget = ci->platdata->power_budget;
+	hcd->phy = ci->transceiver;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ca9b387..b43b29c 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
 
 	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	ci->transceiver = usb_get_transceiver();
+	if (ci->global_phy) {
+		ci->transceiver = usb_get_transceiver();
 
 	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (ci->transceiver == NULL) {
@@ -1728,7 +1729,8 @@ static int udc_start(struct ci13xxx *ci)
 remove_trans:
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
@@ -1737,7 +1739,7 @@ remove_dbg:
 unreg_device:
 	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (ci->transceiver)
+	if (ci->transceiver && ci->global_phy)
 		usb_put_transceiver(ci->transceiver);
 free_pools:
 	dma_pool_destroy(ci->td_pool);
@@ -1771,7 +1773,8 @@ static void udc_stop(struct ci13xxx *ci)
 
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, NULL);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 	dbg_remove_files(&ci->gadget.dev);
 	device_unregister(&ci->gadget.dev);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index be078f0..544825d 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
 #ifndef __LINUX_USB_CHIPIDEA_H
 #define __LINUX_USB_CHIPIDEA_H
 
+#include <linux/usb/otg.h>
+
 struct ci13xxx;
 struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
+	struct usb_phy	*phy;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.9.5

Re: [PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 2400 bytes --]

On 06/21/2012 08:41 AM, Richard Zhao wrote:
> Sometimes, the driver bindings may know what phy they use.
> For example, when using device tree, the usb controller may have a
> phandler pointing to usb phy.
> 
> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Reviewed-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
> Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
> Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org>

[...]

> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
>  
>  	ci->gadget.ep0 = &ci->ep0in->ep;
>  
> -	ci->transceiver = usb_get_transceiver();
> +	if (ci->global_phy) {
                           ^^^

This doesn't compile, closing curly brackets are missing.

> +		ci->transceiver = usb_get_transceiver();
>  
>  	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
>  		if (ci->transceiver == NULL) {
> @@ -1728,7 +1729,8 @@ static int udc_start(struct ci13xxx *ci)
>  remove_trans:
>  	if (ci->transceiver) {
>  		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
> -		usb_put_transceiver(ci->transceiver);
> +		if (ci->global_phy)
> +			usb_put_transceiver(ci->transceiver);
>  	}
>  
>  	dev_err(dev, "error = %i\n", retval);
> @@ -1737,7 +1739,7 @@ remove_dbg:
>  unreg_device:
>  	device_unregister(&ci->gadget.dev);
>  put_transceiver:
> -	if (ci->transceiver)
> +	if (ci->transceiver && ci->global_phy)
>  		usb_put_transceiver(ci->transceiver);
>  free_pools:
>  	dma_pool_destroy(ci->td_pool);
> @@ -1771,7 +1773,8 @@ static void udc_stop(struct ci13xxx *ci)
>  
>  	if (ci->transceiver) {
>  		otg_set_peripheral(ci->transceiver->otg, NULL);
> -		usb_put_transceiver(ci->transceiver);
> +		if (ci->global_phy)
> +			usb_put_transceiver(ci->transceiver);
>  	}
>  	dbg_remove_files(&ci->gadget.dev);
>  	device_unregister(&ci->gadget.dev);
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index be078f0..544825d 100644

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer

[Marc Kleine-Budde]

On 06/21/2012 08:41 AM, Richard Zhao wrote:
> Sometimes, the driver bindings may know what phy they use.
> For example, when using device tree, the usb controller may have a
> phandler pointing to usb phy.
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> Reviewed-by: Marek Vasut <marex@denx.de>
> Acked-by: Felipe Balbi <balbi@ti.com>
> Tested-by: Subodh Nijsure <snijsure@grid-net.com>

[...]

> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
>  
>  	ci->gadget.ep0 = &ci->ep0in->ep;
>  
> -	ci->transceiver = usb_get_transceiver();
> +	if (ci->global_phy) {
                           ^^^

This doesn't compile, closing curly brackets are missing.

> +		ci->transceiver = usb_get_transceiver();
>  
>  	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
>  		if (ci->transceiver == NULL) {
> @@ -1728,7 +1729,8 @@ static int udc_start(struct ci13xxx *ci)
>  remove_trans:
>  	if (ci->transceiver) {
>  		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
> -		usb_put_transceiver(ci->transceiver);
> +		if (ci->global_phy)
> +			usb_put_transceiver(ci->transceiver);
>  	}
>  
>  	dev_err(dev, "error = %i\n", retval);
> @@ -1737,7 +1739,7 @@ remove_dbg:
>  unreg_device:
>  	device_unregister(&ci->gadget.dev);
>  put_transceiver:
> -	if (ci->transceiver)
> +	if (ci->transceiver && ci->global_phy)
>  		usb_put_transceiver(ci->transceiver);
>  free_pools:
>  	dma_pool_destroy(ci->td_pool);
> @@ -1771,7 +1773,8 @@ static void udc_stop(struct ci13xxx *ci)
>  
>  	if (ci->transceiver) {
>  		otg_set_peripheral(ci->transceiver->otg, NULL);
> -		usb_put_transceiver(ci->transceiver);
> +		if (ci->global_phy)
> +			usb_put_transceiver(ci->transceiver);
>  	}
>  	dbg_remove_files(&ci->gadget.dev);
>  	device_unregister(&ci->gadget.dev);
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index be078f0..544825d 100644

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120621/92e518aa/attachment.sig>

Re: [PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

On Thu, Jun 21, 2012 at 09:18:22AM +0200, Marc Kleine-Budde wrote:
> On 06/21/2012 08:41 AM, Richard Zhao wrote:
> > Sometimes, the driver bindings may know what phy they use.
> > For example, when using device tree, the usb controller may have a
> > phandler pointing to usb phy.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> > Reviewed-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
> > Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
> > Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org>
> 
> [...]
> 
> > --- a/drivers/usb/chipidea/udc.c
> > +++ b/drivers/usb/chipidea/udc.c
> > @@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
> >  
> >  	ci->gadget.ep0 = &ci->ep0in->ep;
> >  
> > -	ci->transceiver = usb_get_transceiver();
> > +	if (ci->global_phy) {
>                            ^^^
> 
> This doesn't compile, closing curly brackets are missing.
> 
Nice catch. 

Thanks
Richard

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 12/14] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

On Thu, Jun 21, 2012 at 09:18:22AM +0200, Marc Kleine-Budde wrote:
> On 06/21/2012 08:41 AM, Richard Zhao wrote:
> > Sometimes, the driver bindings may know what phy they use.
> > For example, when using device tree, the usb controller may have a
> > phandler pointing to usb phy.
> > 
> > Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> > Reviewed-by: Marek Vasut <marex@denx.de>
> > Acked-by: Felipe Balbi <balbi@ti.com>
> > Tested-by: Subodh Nijsure <snijsure@grid-net.com>
> 
> [...]
> 
> > --- a/drivers/usb/chipidea/udc.c
> > +++ b/drivers/usb/chipidea/udc.c
> > @@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
> >  
> >  	ci->gadget.ep0 = &ci->ep0in->ep;
> >  
> > -	ci->transceiver = usb_get_transceiver();
> > +	if (ci->global_phy) {
>                            ^^^
> 
> This doesn't compile, closing curly brackets are missing.
> 
Nice catch. 

Thanks
Richard

[PATCH v7] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Reviewed-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org>
---
 drivers/usb/chipidea/ci.h    |    2 ++
 drivers/usb/chipidea/core.c  |    4 ++++
 drivers/usb/chipidea/host.c  |    1 +
 drivers/usb/chipidea/udc.c   |   11 +++++++----
 include/linux/usb/chipidea.h |    3 +++
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 9655e35..d738603 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -160,6 +160,8 @@ struct ci13xxx {
 
 	struct ci13xxx_platform_data	*platdata;
 	int				vbus_active;
+	/* FIXME: some day, we'll not use global phy */
+	bool				global_phy;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index c14ce2b..21407e7 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -419,6 +419,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 
 	ci->dev = dev;
 	ci->platdata = dev->platform_data;
+	if (ci->platdata->phy)
+		ci->transceiver = ci->platdata->phy;
+	else
+		ci->global_phy = true;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 4a4fdb8..ebff9f4 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -117,6 +117,7 @@ static int host_start(struct ci13xxx *ci)
 	hcd->has_tt = 1;
 
 	hcd->power_budget = ci->platdata->power_budget;
+	hcd->phy = ci->transceiver;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ca9b387..ebc88c1 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
 
 	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	ci->transceiver = usb_get_transceiver();
+	if (ci->global_phy)
+		ci->transceiver = usb_get_transceiver();
 
 	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (ci->transceiver == NULL) {
@@ -1728,7 +1729,8 @@ static int udc_start(struct ci13xxx *ci)
 remove_trans:
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
@@ -1737,7 +1739,7 @@ remove_dbg:
 unreg_device:
 	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (ci->transceiver)
+	if (ci->transceiver && ci->global_phy)
 		usb_put_transceiver(ci->transceiver);
 free_pools:
 	dma_pool_destroy(ci->td_pool);
@@ -1771,7 +1773,8 @@ static void udc_stop(struct ci13xxx *ci)
 
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, NULL);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 	dbg_remove_files(&ci->gadget.dev);
 	device_unregister(&ci->gadget.dev);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index be078f0..544825d 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
 #ifndef __LINUX_USB_CHIPIDEA_H
 #define __LINUX_USB_CHIPIDEA_H
 
+#include <linux/usb/otg.h>
+
 struct ci13xxx;
 struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
+	struct usb_phy	*phy;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 drivers/usb/chipidea/ci.h    |    2 ++
 drivers/usb/chipidea/core.c  |    4 ++++
 drivers/usb/chipidea/host.c  |    1 +
 drivers/usb/chipidea/udc.c   |   11 +++++++----
 include/linux/usb/chipidea.h |    3 +++
 5 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 9655e35..d738603 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -160,6 +160,8 @@ struct ci13xxx {
 
 	struct ci13xxx_platform_data	*platdata;
 	int				vbus_active;
+	/* FIXME: some day, we'll not use global phy */
+	bool				global_phy;
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 };
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index c14ce2b..21407e7 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -419,6 +419,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev)
 
 	ci->dev = dev;
 	ci->platdata = dev->platform_data;
+	if (ci->platdata->phy)
+		ci->transceiver = ci->platdata->phy;
+	else
+		ci->global_phy = true;
 
 	ret = hw_device_init(ci, base);
 	if (ret < 0) {
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 4a4fdb8..ebff9f4 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -117,6 +117,7 @@ static int host_start(struct ci13xxx *ci)
 	hcd->has_tt = 1;
 
 	hcd->power_budget = ci->platdata->power_budget;
+	hcd->phy = ci->transceiver;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ca9b387..ebc88c1 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1684,7 +1684,8 @@ static int udc_start(struct ci13xxx *ci)
 
 	ci->gadget.ep0 = &ci->ep0in->ep;
 
-	ci->transceiver = usb_get_transceiver();
+	if (ci->global_phy)
+		ci->transceiver = usb_get_transceiver();
 
 	if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (ci->transceiver == NULL) {
@@ -1728,7 +1729,8 @@ static int udc_start(struct ci13xxx *ci)
 remove_trans:
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, &ci->gadget);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 
 	dev_err(dev, "error = %i\n", retval);
@@ -1737,7 +1739,7 @@ remove_dbg:
 unreg_device:
 	device_unregister(&ci->gadget.dev);
 put_transceiver:
-	if (ci->transceiver)
+	if (ci->transceiver && ci->global_phy)
 		usb_put_transceiver(ci->transceiver);
 free_pools:
 	dma_pool_destroy(ci->td_pool);
@@ -1771,7 +1773,8 @@ static void udc_stop(struct ci13xxx *ci)
 
 	if (ci->transceiver) {
 		otg_set_peripheral(ci->transceiver->otg, NULL);
-		usb_put_transceiver(ci->transceiver);
+		if (ci->global_phy)
+			usb_put_transceiver(ci->transceiver);
 	}
 	dbg_remove_files(&ci->gadget.dev);
 	device_unregister(&ci->gadget.dev);
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
index be078f0..544825d 100644
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -5,12 +5,15 @@
 #ifndef __LINUX_USB_CHIPIDEA_H
 #define __LINUX_USB_CHIPIDEA_H
 
+#include <linux/usb/otg.h>
+
 struct ci13xxx;
 struct ci13xxx_platform_data {
 	const char	*name;
 	/* offset of the capability registers */
 	uintptr_t	 capoffset;
 	unsigned	 power_budget;
+	struct usb_phy	*phy;
 	unsigned long	 flags;
 #define CI13XXX_REGS_SHARED		BIT(0)
 #define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
-- 
1.7.9.5

Re: [PATCH v7] usb: chipidea: permit driver bindings pass phy pointer

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 4805 bytes --]

On 06/21/2012 10:51 AM, Richard Zhao wrote:
> Sometimes, the driver bindings may know what phy they use.
> For example, when using device tree, the usb controller may have a
> phandler pointing to usb phy.

Remove the module doesn't remove the platform device. A subsequent modprobe fails with:

------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:529 sysfs_add_one+0x8c/0xbc()
sysfs: cannot create duplicate filename '/devices/80080000.ahb/80080000.usb/ci_hdrc.0'
Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
[<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
[<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
[<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c00dbbbc>] (sysfs_add_one+0x8c/0xbc)
[<c00dbbbc>] (sysfs_add_one+0x8c/0xbc) from [<c00dbd2c>] (create_dir+0x60/0xc0)
[<c00dbd2c>] (create_dir+0x60/0xc0) from [<c00dc08c>] (sysfs_create_dir+0x64/0xa8)
[<c00dc08c>] (sysfs_create_dir+0x64/0xa8) from [<c0151f28>] (kobject_add_internal+0xa4/0x1e8)
[<c0151f28>] (kobject_add_internal+0xa4/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
[<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
[<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
[<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
[<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
[<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
[<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
[<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
[<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
[<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
[<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
[<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
[<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
[<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
---[ end trace e152599aa12f31d8 ]---
------------[ cut here ]------------
WARNING: at lib/kobject.c:196 kobject_add_internal+0x1cc/0x1e8()
kobject_add_internal failed for ci_hdrc.0 with -EEXIST, don't try to register things with the same name in the same directory.
Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
[<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
[<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
[<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c0152050>] (kobject_add_internal+0x1cc/0x1e8)
[<c0152050>] (kobject_add_internal+0x1cc/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
[<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
[<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
[<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
[<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
[<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
[<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
[<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
[<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
[<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
[<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
[<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
[<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
[<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
---[ end trace e152599aa12f31d9 ]---
imx_usb 80080000.usb: Can't register ci_hdrc platform device, err=-17
imx_usb: probe of 80080000.usb failed with error -17

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[PATCH v7] usb: chipidea: permit driver bindings pass phy pointer

[Marc Kleine-Budde]

On 06/21/2012 10:51 AM, Richard Zhao wrote:
> Sometimes, the driver bindings may know what phy they use.
> For example, when using device tree, the usb controller may have a
> phandler pointing to usb phy.

Remove the module doesn't remove the platform device. A subsequent modprobe fails with:

------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:529 sysfs_add_one+0x8c/0xbc()
sysfs: cannot create duplicate filename '/devices/80080000.ahb/80080000.usb/ci_hdrc.0'
Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
[<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
[<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
[<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c00dbbbc>] (sysfs_add_one+0x8c/0xbc)
[<c00dbbbc>] (sysfs_add_one+0x8c/0xbc) from [<c00dbd2c>] (create_dir+0x60/0xc0)
[<c00dbd2c>] (create_dir+0x60/0xc0) from [<c00dc08c>] (sysfs_create_dir+0x64/0xa8)
[<c00dc08c>] (sysfs_create_dir+0x64/0xa8) from [<c0151f28>] (kobject_add_internal+0xa4/0x1e8)
[<c0151f28>] (kobject_add_internal+0xa4/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
[<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
[<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
[<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
[<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
[<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
[<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
[<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
[<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
[<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
[<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
[<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
[<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
[<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
---[ end trace e152599aa12f31d8 ]---
------------[ cut here ]------------
WARNING: at lib/kobject.c:196 kobject_add_internal+0x1cc/0x1e8()
kobject_add_internal failed for ci_hdrc.0 with -EEXIST, don't try to register things with the same name in the same directory.
Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
[<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
[<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
[<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c0152050>] (kobject_add_internal+0x1cc/0x1e8)
[<c0152050>] (kobject_add_internal+0x1cc/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
[<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
[<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
[<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
[<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
[<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
[<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
[<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
[<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
[<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
[<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
[<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
[<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
[<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
---[ end trace e152599aa12f31d9 ]---
imx_usb 80080000.usb: Can't register ci_hdrc platform device, err=-17
imx_usb: probe of 80080000.usb failed with error -17

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120621/a8372925/attachment.sig>

Re: [PATCH v7] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

On Thu, Jun 21, 2012 at 10:42:52PM +0200, Marc Kleine-Budde wrote:
> On 06/21/2012 10:51 AM, Richard Zhao wrote:
> > Sometimes, the driver bindings may know what phy they use.
> > For example, when using device tree, the usb controller may have a
> > phandler pointing to usb phy.
> 
> Remove the module doesn't remove the platform device. A subsequent modprobe fails with:
> 
> ------------[ cut here ]------------
> WARNING: at fs/sysfs/dir.c:529 sysfs_add_one+0x8c/0xbc()
> sysfs: cannot create duplicate filename '/devices/80080000.ahb/80080000.usb/ci_hdrc.0'
> Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
> [<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
> [<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
> [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c00dbbbc>] (sysfs_add_one+0x8c/0xbc)
> [<c00dbbbc>] (sysfs_add_one+0x8c/0xbc) from [<c00dbd2c>] (create_dir+0x60/0xc0)
> [<c00dbd2c>] (create_dir+0x60/0xc0) from [<c00dc08c>] (sysfs_create_dir+0x64/0xa8)
> [<c00dc08c>] (sysfs_create_dir+0x64/0xa8) from [<c0151f28>] (kobject_add_internal+0xa4/0x1e8)
> [<c0151f28>] (kobject_add_internal+0xa4/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
> [<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
> [<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
> [<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
> [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
> [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
> [<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
> [<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
> [<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
> [<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
> [<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
> [<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
> [<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
> [<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
> ---[ end trace e152599aa12f31d8 ]---
> ------------[ cut here ]------------
> WARNING: at lib/kobject.c:196 kobject_add_internal+0x1cc/0x1e8()
> kobject_add_internal failed for ci_hdrc.0 with -EEXIST, don't try to register things with the same name in the same directory.
> Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
> [<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
> [<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
> [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c0152050>] (kobject_add_internal+0x1cc/0x1e8)
> [<c0152050>] (kobject_add_internal+0x1cc/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
> [<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
> [<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
> [<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
> [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
> [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
> [<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
> [<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
> [<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
> [<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
> [<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
> [<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
> [<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
> [<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
> ---[ end trace e152599aa12f31d9 ]---
> imx_usb 80080000.usb: Can't register ci_hdrc platform device, err=-17
> imx_usb: probe of 80080000.usb failed with error -17
It's caused by Patch #7 .
Thanks very much.

Richard
> 
> Marc
> 
> -- 
> Pengutronix e.K.                  | Marc Kleine-Budde           |
> Industrial Linux Solutions        | Phone: +49-231-2826-924     |
> Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
> 



--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v7] usb: chipidea: permit driver bindings pass phy pointer

[Richard Zhao]

On Thu, Jun 21, 2012 at 10:42:52PM +0200, Marc Kleine-Budde wrote:
> On 06/21/2012 10:51 AM, Richard Zhao wrote:
> > Sometimes, the driver bindings may know what phy they use.
> > For example, when using device tree, the usb controller may have a
> > phandler pointing to usb phy.
> 
> Remove the module doesn't remove the platform device. A subsequent modprobe fails with:
> 
> ------------[ cut here ]------------
> WARNING: at fs/sysfs/dir.c:529 sysfs_add_one+0x8c/0xbc()
> sysfs: cannot create duplicate filename '/devices/80080000.ahb/80080000.usb/ci_hdrc.0'
> Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
> [<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
> [<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
> [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c00dbbbc>] (sysfs_add_one+0x8c/0xbc)
> [<c00dbbbc>] (sysfs_add_one+0x8c/0xbc) from [<c00dbd2c>] (create_dir+0x60/0xc0)
> [<c00dbd2c>] (create_dir+0x60/0xc0) from [<c00dc08c>] (sysfs_create_dir+0x64/0xa8)
> [<c00dc08c>] (sysfs_create_dir+0x64/0xa8) from [<c0151f28>] (kobject_add_internal+0xa4/0x1e8)
> [<c0151f28>] (kobject_add_internal+0xa4/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
> [<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
> [<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
> [<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
> [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
> [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
> [<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
> [<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
> [<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
> [<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
> [<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
> [<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
> [<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
> [<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
> ---[ end trace e152599aa12f31d8 ]---
> ------------[ cut here ]------------
> WARNING: at lib/kobject.c:196 kobject_add_internal+0x1cc/0x1e8()
> kobject_add_internal failed for ci_hdrc.0 with -EEXIST, don't try to register things with the same name in the same directory.
> Modules linked in: ci13xxx_imx(+) ci_hdrc udc_core [last unloaded: ci13xxx_imx]
> [<c000e6c8>] (unwind_backtrace+0x0/0xf0) from [<c0015c70>] (warn_slowpath_common+0x4c/0x64)
> [<c0015c70>] (warn_slowpath_common+0x4c/0x64) from [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40)
> [<c0015d1c>] (warn_slowpath_fmt+0x30/0x40) from [<c0152050>] (kobject_add_internal+0x1cc/0x1e8)
> [<c0152050>] (kobject_add_internal+0x1cc/0x1e8) from [<c0152434>] (kobject_add+0x50/0x98)
> [<c0152434>] (kobject_add+0x50/0x98) from [<c0187fe4>] (device_add+0xb8/0x358)
> [<c0187fe4>] (device_add+0xb8/0x358) from [<c018b76c>] (platform_device_add+0xf8/0x1a0)
> [<c018b76c>] (platform_device_add+0xf8/0x1a0) from [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc])
> [<bf006250>] (ci13xxx_add_device+0xd4/0x114 [ci_hdrc]) from [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx])
> [<bf022264>] (ci13xxx_imx_probe+0x1e0/0x288 [ci13xxx_imx]) from [<c018b378>] (platform_drv_probe+0x14/0x18)
> [<c018b378>] (platform_drv_probe+0x14/0x18) from [<c018a230>] (really_probe+0x68/0x1e0)
> [<c018a230>] (really_probe+0x68/0x1e0) from [<c018a530>] (__driver_attach+0x8c/0x90)
> [<c018a530>] (__driver_attach+0x8c/0x90) from [<c0188c0c>] (bus_for_each_dev+0x54/0x7c)
> [<c0188c0c>] (bus_for_each_dev+0x54/0x7c) from [<c0189b74>] (bus_add_driver+0x17c/0x248)
> [<c0189b74>] (bus_add_driver+0x17c/0x248) from [<c018a7e4>] (driver_register+0x78/0x12c)
> [<c018a7e4>] (driver_register+0x78/0x12c) from [<c00086c4>] (do_one_initcall+0x30/0x168)
> [<c00086c4>] (do_one_initcall+0x30/0x168) from [<c004c824>] (sys_init_module+0x74/0x198)
> [<c004c824>] (sys_init_module+0x74/0x198) from [<c0009260>] (ret_fast_syscall+0x0/0x2c)
> ---[ end trace e152599aa12f31d9 ]---
> imx_usb 80080000.usb: Can't register ci_hdrc platform device, err=-17
> imx_usb: probe of 80080000.usb failed with error -17
It's caused by Patch #7 .
Thanks very much.

Richard
> 
> Marc
> 
> -- 
> Pengutronix e.K.                  | Marc Kleine-Budde           |
> Industrial Linux Solutions        | Phone: +49-231-2826-924     |
> Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
> 

[PATCH v6 13/14] usb: otg: add basic mxs phy driver support

[Richard Zhao]

mxs phy is used in Freescale i.MX SoCs, for example
imx23, imx28, imx6Q. This patch adds the basic host
support.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/mxs-phy.txt |   13 ++
 drivers/usb/otg/Kconfig                           |    9 +
 drivers/usb/otg/Makefile                          |    1 +
 drivers/usb/otg/mxs-phy.c                         |  197 +++++++++++++++++++++
 4 files changed, 220 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
 create mode 100644 drivers/usb/otg/mxs-phy.c

diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
new file mode 100644
index 0000000..5835b27
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -0,0 +1,13 @@
+* Freescale MXS USB Phy Device
+
+Required properties:
+- compatible: Should be "fsl,imx23-usbphy"
+- reg: Should contain registers location and length
+- interrupts: Should contain phy interrupt
+
+Example:
+usbphy1: usbphy@020c9000 {
+	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+	reg = <0x020c9000 0x1000>;
+	interrupts = <0 44 0x04>;
+};
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5c87db0..669eb32 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -116,6 +116,15 @@ config FSL_USB2_OTG
 	help
 	  Enable this to support Freescale USB OTG transceiver.
 
+config USB_MXS_PHY
+	tristate "Freescale MXS USB PHY support"
+	select STMP_DEVICE
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the Freescale MXS USB PHY.
+
+	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
+
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
 	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 41aa509..a844b8d 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_USB_MSM_OTG)	+= msm_otg.o
 obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
 fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o
 obj-$(CONFIG_FSL_USB2_OTG)	+= fsl_usb2_otg.o
+obj-$(CONFIG_USB_MXS_PHY)	+= mxs-phy.o
 obj-$(CONFIG_USB_MV_OTG)	+= mv_otg.o
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
new file mode 100644
index 0000000..d64c1fe
--- /dev/null
+++ b/drivers/usb/otg/mxs-phy.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+#include <linux/stmp_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#define DRIVER_NAME "mxs_phy"
+
+#define HW_USBPHY_PWD				0x00
+#define HW_USBPHY_CTRL				0x30
+#define HW_USBPHY_CTRL_SET			0x34
+#define HW_USBPHY_CTRL_CLR			0x38
+
+#define BM_USBPHY_CTRL_SFTRST			BIT(31)
+#define BM_USBPHY_CTRL_CLKGATE			BIT(30)
+#define BM_USBPHY_CTRL_ENUTMILEVEL3		BIT(15)
+#define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
+
+struct mxs_phy {
+	struct usb_phy phy;
+	struct clk *clk;
+	int connected:1;
+};
+
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+static void mxs_phy_hw_init(struct mxs_phy *mxs_phy)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+
+	stmp_reset_block(base + HW_USBPHY_CTRL);
+
+	/* Power up the PHY */
+	writel_relaxed(0, base + HW_USBPHY_PWD);
+
+	/* enable FS/LS device */
+	writel_relaxed(BM_USBPHY_CTRL_ENUTMILEVEL2 |
+			BM_USBPHY_CTRL_ENUTMILEVEL3,
+			base + HW_USBPHY_CTRL_SET);
+}
+
+static int mxs_phy_init(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	clk_prepare_enable(mxs_phy->clk);
+	mxs_phy_hw_init(mxs_phy);
+
+	return 0;
+}
+
+static void mxs_phy_shutdown(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	writel_relaxed(BM_USBPHY_CTRL_CLKGATE,
+			phy->io_priv + HW_USBPHY_CTRL_SET);
+
+	clk_disable_unprepare(mxs_phy->clk);
+}
+
+static int mxs_phy_on_connect(struct usb_phy *phy, int port)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	dev_dbg(phy->dev, "Connect on port %d\n", port);
+
+	if (mxs_phy->connected)
+		return 0;
+	mxs_phy_hw_init(to_mxs_phy(phy));
+	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+			phy->io_priv + HW_USBPHY_CTRL_SET);
+	mxs_phy->connected = 1;
+
+	return 0;
+}
+
+static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	dev_dbg(phy->dev, "Disconnect on port %d\n", port);
+
+	if (!mxs_phy->connected)
+		return 0;
+	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+			phy->io_priv + HW_USBPHY_CTRL_CLR);
+	mxs_phy->connected = 0;
+
+	return 0;
+}
+
+static int mxs_phy_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *base;
+	struct clk *clk;
+	struct mxs_phy *mxs_phy;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't get device resources\n");
+		return -ENOENT;
+	}
+
+	base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!base)
+		return -EBUSY;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev,
+			"can't get the clock, err=%ld", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
+	if (!mxs_phy) {
+		dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n");
+		return -ENOMEM;
+	}
+
+	mxs_phy->phy.io_priv		= base;
+	mxs_phy->phy.dev		= &pdev->dev;
+	mxs_phy->phy.label		= DRIVER_NAME;
+	mxs_phy->phy.init		= mxs_phy_init;
+	mxs_phy->phy.shutdown		= mxs_phy_shutdown;
+	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
+	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
+
+	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
+
+	mxs_phy->clk = clk;
+
+	platform_set_drvdata(pdev, &mxs_phy->phy);
+
+	return 0;
+}
+
+static int __devexit mxs_phy_remove(struct platform_device *pdev)
+{
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx23-usbphy", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
+static struct platform_driver mxs_phy_driver = {
+	.probe = mxs_phy_probe,
+	.remove = __devexit_p(mxs_phy_remove),
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = mxs_phy_dt_ids,
+	 },
+};
+
+static int __init mxs_phy_module_init(void)
+{
+	return platform_driver_register(&mxs_phy_driver);
+}
+postcore_initcall(mxs_phy_module_init);
+
+static void __exit mxs_phy_module_exit(void)
+{
+	platform_driver_unregister(&mxs_phy_driver);
+}
+module_exit(mxs_phy_module_exit);
+
+MODULE_ALIAS("platform:mxs-usb-phy");
+MODULE_AUTHOR("Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>");
+MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
+MODULE_LICENSE("GPL");
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 13/14] usb: otg: add basic mxs phy driver support

[Richard Zhao]

mxs phy is used in Freescale i.MX SoCs, for example
imx23, imx28, imx6Q. This patch adds the basic host
support.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Peter Chen <peter.chen@freescale.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 Documentation/devicetree/bindings/usb/mxs-phy.txt |   13 ++
 drivers/usb/otg/Kconfig                           |    9 +
 drivers/usb/otg/Makefile                          |    1 +
 drivers/usb/otg/mxs-phy.c                         |  197 +++++++++++++++++++++
 4 files changed, 220 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
 create mode 100644 drivers/usb/otg/mxs-phy.c

diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt
new file mode 100644
index 0000000..5835b27
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt
@@ -0,0 +1,13 @@
+* Freescale MXS USB Phy Device
+
+Required properties:
+- compatible: Should be "fsl,imx23-usbphy"
+- reg: Should contain registers location and length
+- interrupts: Should contain phy interrupt
+
+Example:
+usbphy1: usbphy at 020c9000 {
+	compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
+	reg = <0x020c9000 0x1000>;
+	interrupts = <0 44 0x04>;
+};
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5c87db0..669eb32 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -116,6 +116,15 @@ config FSL_USB2_OTG
 	help
 	  Enable this to support Freescale USB OTG transceiver.
 
+config USB_MXS_PHY
+	tristate "Freescale MXS USB PHY support"
+	select STMP_DEVICE
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the Freescale MXS USB PHY.
+
+	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
+
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
 	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 41aa509..a844b8d 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_USB_MSM_OTG)	+= msm_otg.o
 obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
 fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o
 obj-$(CONFIG_FSL_USB2_OTG)	+= fsl_usb2_otg.o
+obj-$(CONFIG_USB_MXS_PHY)	+= mxs-phy.o
 obj-$(CONFIG_USB_MV_OTG)	+= mv_otg.o
diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c
new file mode 100644
index 0000000..d64c1fe
--- /dev/null
+++ b/drivers/usb/otg/mxs-phy.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+#include <linux/stmp_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#define DRIVER_NAME "mxs_phy"
+
+#define HW_USBPHY_PWD				0x00
+#define HW_USBPHY_CTRL				0x30
+#define HW_USBPHY_CTRL_SET			0x34
+#define HW_USBPHY_CTRL_CLR			0x38
+
+#define BM_USBPHY_CTRL_SFTRST			BIT(31)
+#define BM_USBPHY_CTRL_CLKGATE			BIT(30)
+#define BM_USBPHY_CTRL_ENUTMILEVEL3		BIT(15)
+#define BM_USBPHY_CTRL_ENUTMILEVEL2		BIT(14)
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT	BIT(1)
+
+struct mxs_phy {
+	struct usb_phy phy;
+	struct clk *clk;
+	int connected:1;
+};
+
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+static void mxs_phy_hw_init(struct mxs_phy *mxs_phy)
+{
+	void __iomem *base = mxs_phy->phy.io_priv;
+
+	stmp_reset_block(base + HW_USBPHY_CTRL);
+
+	/* Power up the PHY */
+	writel_relaxed(0, base + HW_USBPHY_PWD);
+
+	/* enable FS/LS device */
+	writel_relaxed(BM_USBPHY_CTRL_ENUTMILEVEL2 |
+			BM_USBPHY_CTRL_ENUTMILEVEL3,
+			base + HW_USBPHY_CTRL_SET);
+}
+
+static int mxs_phy_init(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	clk_prepare_enable(mxs_phy->clk);
+	mxs_phy_hw_init(mxs_phy);
+
+	return 0;
+}
+
+static void mxs_phy_shutdown(struct usb_phy *phy)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	writel_relaxed(BM_USBPHY_CTRL_CLKGATE,
+			phy->io_priv + HW_USBPHY_CTRL_SET);
+
+	clk_disable_unprepare(mxs_phy->clk);
+}
+
+static int mxs_phy_on_connect(struct usb_phy *phy, int port)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	dev_dbg(phy->dev, "Connect on port %d\n", port);
+
+	if (mxs_phy->connected)
+		return 0;
+	mxs_phy_hw_init(to_mxs_phy(phy));
+	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+			phy->io_priv + HW_USBPHY_CTRL_SET);
+	mxs_phy->connected = 1;
+
+	return 0;
+}
+
+static int mxs_phy_on_disconnect(struct usb_phy *phy, int port)
+{
+	struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+	dev_dbg(phy->dev, "Disconnect on port %d\n", port);
+
+	if (!mxs_phy->connected)
+		return 0;
+	writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+			phy->io_priv + HW_USBPHY_CTRL_CLR);
+	mxs_phy->connected = 0;
+
+	return 0;
+}
+
+static int mxs_phy_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *base;
+	struct clk *clk;
+	struct mxs_phy *mxs_phy;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't get device resources\n");
+		return -ENOENT;
+	}
+
+	base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!base)
+		return -EBUSY;
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev,
+			"can't get the clock, err=%ld", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
+	if (!mxs_phy) {
+		dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n");
+		return -ENOMEM;
+	}
+
+	mxs_phy->phy.io_priv		= base;
+	mxs_phy->phy.dev		= &pdev->dev;
+	mxs_phy->phy.label		= DRIVER_NAME;
+	mxs_phy->phy.init		= mxs_phy_init;
+	mxs_phy->phy.shutdown		= mxs_phy_shutdown;
+	mxs_phy->phy.notify_connect	= mxs_phy_on_connect;
+	mxs_phy->phy.notify_disconnect	= mxs_phy_on_disconnect;
+
+	ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
+
+	mxs_phy->clk = clk;
+
+	platform_set_drvdata(pdev, &mxs_phy->phy);
+
+	return 0;
+}
+
+static int __devexit mxs_phy_remove(struct platform_device *pdev)
+{
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+	{ .compatible = "fsl,imx23-usbphy", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
+static struct platform_driver mxs_phy_driver = {
+	.probe = mxs_phy_probe,
+	.remove = __devexit_p(mxs_phy_remove),
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner	= THIS_MODULE,
+		.of_match_table = mxs_phy_dt_ids,
+	 },
+};
+
+static int __init mxs_phy_module_init(void)
+{
+	return platform_driver_register(&mxs_phy_driver);
+}
+postcore_initcall(mxs_phy_module_init);
+
+static void __exit mxs_phy_module_exit(void)
+{
+	platform_driver_unregister(&mxs_phy_driver);
+}
+module_exit(mxs_phy_module_exit);
+
+MODULE_ALIAS("platform:mxs-usb-phy");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
+MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
+MODULE_LICENSE("GPL");
-- 
1.7.9.5

Re: [PATCH v6 13/14] usb: otg: add basic mxs phy driver support

[Alexander Shishkin]

Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> writes:

> +config USB_MXS_PHY
> +	tristate "Freescale MXS USB PHY support"
> +	select STMP_DEVICE
> +	select USB_OTG_UTILS

There should also be a dependency on ARM (or maybe even ARCH_MXS),
because you're using writel_relaxed() here, which only exists on arm and
sh4 and enabling it on other architectures breaks compilation.

Regards,
--
Alex
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 13/14] usb: otg: add basic mxs phy driver support

[Alexander Shishkin]

Richard Zhao <richard.zhao@freescale.com> writes:

> +config USB_MXS_PHY
> +	tristate "Freescale MXS USB PHY support"
> +	select STMP_DEVICE
> +	select USB_OTG_UTILS

There should also be a dependency on ARM (or maybe even ARCH_MXS),
because you're using writel_relaxed() here, which only exists on arm and
sh4 and enabling it on other architectures breaks compilation.

Regards,
--
Alex

Re: [PATCH v6 13/14] usb: otg: add basic mxs phy driver support

[Richard Zhao]

On Tue, Jun 26, 2012 at 12:15:23PM +0300, Alexander Shishkin wrote:
> Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> writes:
> 
> > +config USB_MXS_PHY
> > +	tristate "Freescale MXS USB PHY support"
> > +	select STMP_DEVICE
> > +	select USB_OTG_UTILS
> 
> There should also be a dependency on ARM (or maybe even ARCH_MXS),
> because you're using writel_relaxed() here, which only exists on arm and
> sh4 and enabling it on other architectures breaks compilation.
Thanks for your view. I'll add
	depends on ARCH_MXC || ARCH_MXS

Richard
> 
> Regards,
> --
> Alex
> 

[PATCH v6 13/14] usb: otg: add basic mxs phy driver support

[Richard Zhao]

On Tue, Jun 26, 2012 at 12:15:23PM +0300, Alexander Shishkin wrote:
> Richard Zhao <richard.zhao@freescale.com> writes:
> 
> > +config USB_MXS_PHY
> > +	tristate "Freescale MXS USB PHY support"
> > +	select STMP_DEVICE
> > +	select USB_OTG_UTILS
> 
> There should also be a dependency on ARM (or maybe even ARCH_MXS),
> because you're using writel_relaxed() here, which only exists on arm and
> sh4 and enabling it on other architectures breaks compilation.
Thanks for your view. I'll add
	depends on ARCH_MXC || ARCH_MXS

Richard
> 
> Regards,
> --
> Alex
> 

[PATCH v6 14/14] usb: chipidea: add imx platform driver

[Richard Zhao]

This patch supports only the host-mode functionality so far.

Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
Cc: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>
Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org>
---
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |   20 ++
 drivers/usb/chipidea/Makefile                      |    3 +
 drivers/usb/chipidea/ci13xxx_imx.c                 |  197 ++++++++++++++++++++
 3 files changed, 220 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
 create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
new file mode 100644
index 0000000..8bcd071
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -0,0 +1,20 @@
+* Freescale i.MX ci13xxx usb controllers
+
+Required properties:
+- compatible: Should be "fsl,imx27-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Optional properties:
+- fsl,usbphy: phandler of usb phy that connects to the only one port
+- fsl,hub-reset-gpios: gpio used to reset on-board usb hub
+- fsl,vbus-power-gpios: gpio used to set vbus power of the only one port
+
+Examples:
+usb@02184000 { /* USB OTG */
+	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+	reg = <0x02184000 0x200>;
+	interrupts = <0 43 0x04>;
+	fsl,usbphy = <&usbphy1>;
+	fsl,vbus-power-gpios = <&gpio3 22 0>;
+};
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index b69900a..5c66d9c 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -14,3 +14,6 @@ ifneq ($(CONFIG_PCI),)
 	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_pci.o
 endif
 
+ifneq ($(CONFIG_OF_DEVICE),)
+	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o
+endif
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
new file mode 100644
index 0000000..efae2be
--- /dev/null
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/chipidea.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+
+#include "ci.h"
+
+#define pdev_to_phy(pdev) \
+	((struct usb_phy *)platform_get_drvdata(pdev))
+
+struct ci13xxx_imx_data {
+	struct device_node *phy_np;
+	struct usb_phy *phy;
+	struct platform_device *ci_pdev;
+	struct clk *clk;
+	struct regulator *reg_vbus;
+};
+
+static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
+	.name			= "ci13xxx_imx",
+	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
+				  CI13XXX_PULLUP_ON_VBUS |
+				  CI13XXX_DISABLE_STREAMING,
+	.capoffset		= DEF_CAPOFFSET,
+};
+
+static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
+{
+	struct ci13xxx_imx_data *data;
+	struct platform_device *plat_ci, *phy_pdev;
+	struct device_node *phy_np;
+	struct resource *res;
+	struct regulator *reg_vbus;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Can't get device resources!\n");
+		return -ENOENT;
+	}
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk)) {
+		dev_err(&pdev->dev,
+			"Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
+		return PTR_ERR(data->clk);
+	}
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to prepare or enable clock, err=%d\n", ret);
+		return ret;
+	}
+
+	phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
+	if (phy_np) {
+		data->phy_np = phy_np;
+		phy_pdev = of_find_device_by_node(phy_np);
+		if (phy_pdev) {
+			struct usb_phy *phy;
+			phy = pdev_to_phy(phy_pdev);
+			if (phy &&
+			    try_module_get(phy_pdev->dev.driver->owner)) {
+				usb_phy_init(phy);
+				data->phy = phy;
+			}
+		}
+	}
+
+	/* we only support host now, so enable vbus here */
+	reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
+	if (!IS_ERR(reg_vbus)) {
+		ret = regulator_enable(reg_vbus);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to enable vbus regulator, err=%d\n",
+				ret);
+			goto put_np;
+		}
+		data->reg_vbus = reg_vbus;
+	} else {
+		reg_vbus = NULL;
+	}
+
+	ci13xxx_imx_platdata.phy = data->phy;
+
+	if (!pdev->dev.dma_mask) {
+		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
+				      sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+		if (!pdev->dev.dma_mask) {
+			ret = -ENOMEM;
+			dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
+			goto err;
+		}
+		*pdev->dev.dma_mask = DMA_BIT_MASK(32);
+		dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
+	}
+	plat_ci = ci13xxx_add_device(&pdev->dev,
+				pdev->resource, pdev->num_resources,
+				&ci13xxx_imx_platdata);
+	if (IS_ERR(plat_ci)) {
+		ret = PTR_ERR(plat_ci);
+		dev_err(&pdev->dev,
+			"Can't register ci_hdrc platform device, err=%d\n",
+			ret);
+		goto err;
+	}
+
+	data->ci_pdev = plat_ci;
+	platform_set_drvdata(pdev, data);
+
+	pm_runtime_no_callbacks(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err:
+	if (reg_vbus)
+		regulator_disable(reg_vbus);
+put_np:
+	if (phy_np)
+		of_node_put(phy_np);
+	clk_disable_unprepare(data->clk);
+	return ret;
+}
+
+static int __devexit ci13xxx_imx_remove(struct platform_device *pdev)
+{
+	struct ci13xxx_imx_data *data = platform_get_drvdata(pdev);
+
+	ci13xxx_remove_device(data->ci_pdev);
+
+	if (data->reg_vbus)
+		regulator_disable(data->reg_vbus);
+
+	if (data->phy) {
+		usb_phy_shutdown(data->phy);
+		module_put(data->phy->dev->driver->owner);
+	}
+
+	of_node_put(data->phy_np);
+
+	clk_disable_unprepare(data->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id ci13xxx_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx27-usb", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids);
+
+static struct platform_driver ci13xxx_imx_driver = {
+	.probe = ci13xxx_imx_probe,
+	.remove = __devexit_p(ci13xxx_imx_remove),
+	.driver = {
+		.name = "imx_usb",
+		.owner = THIS_MODULE,
+		.of_match_table = ci13xxx_imx_dt_ids,
+	 },
+};
+
+module_platform_driver(ci13xxx_imx_driver);
+
+MODULE_ALIAS("platform:imx-usb");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CI13xxx i.MX USB binding");
+MODULE_AUTHOR("Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>");
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 14/14] usb: chipidea: add imx platform driver

[Richard Zhao]

This patch supports only the host-mode functionality so far.

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Subodh Nijsure <snijsure@grid-net.com>
---
 .../devicetree/bindings/usb/ci13xxx-imx.txt        |   20 ++
 drivers/usb/chipidea/Makefile                      |    3 +
 drivers/usb/chipidea/ci13xxx_imx.c                 |  197 ++++++++++++++++++++
 3 files changed, 220 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
 create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c

diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
new file mode 100644
index 0000000..8bcd071
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -0,0 +1,20 @@
+* Freescale i.MX ci13xxx usb controllers
+
+Required properties:
+- compatible: Should be "fsl,imx27-usb"
+- reg: Should contain registers location and length
+- interrupts: Should contain controller interrupt
+
+Optional properties:
+- fsl,usbphy: phandler of usb phy that connects to the only one port
+- fsl,hub-reset-gpios: gpio used to reset on-board usb hub
+- fsl,vbus-power-gpios: gpio used to set vbus power of the only one port
+
+Examples:
+usb at 02184000 { /* USB OTG */
+	compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+	reg = <0x02184000 0x200>;
+	interrupts = <0 43 0x04>;
+	fsl,usbphy = <&usbphy1>;
+	fsl,vbus-power-gpios = <&gpio3 22 0>;
+};
diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index b69900a..5c66d9c 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile
@@ -14,3 +14,6 @@ ifneq ($(CONFIG_PCI),)
 	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_pci.o
 endif
 
+ifneq ($(CONFIG_OF_DEVICE),)
+	obj-$(CONFIG_USB_CHIPIDEA)	+= ci13xxx_imx.o
+endif
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
new file mode 100644
index 0000000..efae2be
--- /dev/null
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/chipidea.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+
+#include "ci.h"
+
+#define pdev_to_phy(pdev) \
+	((struct usb_phy *)platform_get_drvdata(pdev))
+
+struct ci13xxx_imx_data {
+	struct device_node *phy_np;
+	struct usb_phy *phy;
+	struct platform_device *ci_pdev;
+	struct clk *clk;
+	struct regulator *reg_vbus;
+};
+
+static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = {
+	.name			= "ci13xxx_imx",
+	.flags			= CI13XXX_REQUIRE_TRANSCEIVER |
+				  CI13XXX_PULLUP_ON_VBUS |
+				  CI13XXX_DISABLE_STREAMING,
+	.capoffset		= DEF_CAPOFFSET,
+};
+
+static int __devinit ci13xxx_imx_probe(struct platform_device *pdev)
+{
+	struct ci13xxx_imx_data *data;
+	struct platform_device *plat_ci, *phy_pdev;
+	struct device_node *phy_np;
+	struct resource *res;
+	struct regulator *reg_vbus;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Can't get device resources!\n");
+		return -ENOENT;
+	}
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk)) {
+		dev_err(&pdev->dev,
+			"Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
+		return PTR_ERR(data->clk);
+	}
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Failed to prepare or enable clock, err=%d\n", ret);
+		return ret;
+	}
+
+	phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0);
+	if (phy_np) {
+		data->phy_np = phy_np;
+		phy_pdev = of_find_device_by_node(phy_np);
+		if (phy_pdev) {
+			struct usb_phy *phy;
+			phy = pdev_to_phy(phy_pdev);
+			if (phy &&
+			    try_module_get(phy_pdev->dev.driver->owner)) {
+				usb_phy_init(phy);
+				data->phy = phy;
+			}
+		}
+	}
+
+	/* we only support host now, so enable vbus here */
+	reg_vbus = devm_regulator_get(&pdev->dev, "vbus");
+	if (!IS_ERR(reg_vbus)) {
+		ret = regulator_enable(reg_vbus);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"Failed to enable vbus regulator, err=%d\n",
+				ret);
+			goto put_np;
+		}
+		data->reg_vbus = reg_vbus;
+	} else {
+		reg_vbus = NULL;
+	}
+
+	ci13xxx_imx_platdata.phy = data->phy;
+
+	if (!pdev->dev.dma_mask) {
+		pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
+				      sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+		if (!pdev->dev.dma_mask) {
+			ret = -ENOMEM;
+			dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
+			goto err;
+		}
+		*pdev->dev.dma_mask = DMA_BIT_MASK(32);
+		dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
+	}
+	plat_ci = ci13xxx_add_device(&pdev->dev,
+				pdev->resource, pdev->num_resources,
+				&ci13xxx_imx_platdata);
+	if (IS_ERR(plat_ci)) {
+		ret = PTR_ERR(plat_ci);
+		dev_err(&pdev->dev,
+			"Can't register ci_hdrc platform device, err=%d\n",
+			ret);
+		goto err;
+	}
+
+	data->ci_pdev = plat_ci;
+	platform_set_drvdata(pdev, data);
+
+	pm_runtime_no_callbacks(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err:
+	if (reg_vbus)
+		regulator_disable(reg_vbus);
+put_np:
+	if (phy_np)
+		of_node_put(phy_np);
+	clk_disable_unprepare(data->clk);
+	return ret;
+}
+
+static int __devexit ci13xxx_imx_remove(struct platform_device *pdev)
+{
+	struct ci13xxx_imx_data *data = platform_get_drvdata(pdev);
+
+	ci13xxx_remove_device(data->ci_pdev);
+
+	if (data->reg_vbus)
+		regulator_disable(data->reg_vbus);
+
+	if (data->phy) {
+		usb_phy_shutdown(data->phy);
+		module_put(data->phy->dev->driver->owner);
+	}
+
+	of_node_put(data->phy_np);
+
+	clk_disable_unprepare(data->clk);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id ci13xxx_imx_dt_ids[] = {
+	{ .compatible = "fsl,imx27-usb", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids);
+
+static struct platform_driver ci13xxx_imx_driver = {
+	.probe = ci13xxx_imx_probe,
+	.remove = __devexit_p(ci13xxx_imx_remove),
+	.driver = {
+		.name = "imx_usb",
+		.owner = THIS_MODULE,
+		.of_match_table = ci13xxx_imx_dt_ids,
+	 },
+};
+
+module_platform_driver(ci13xxx_imx_driver);
+
+MODULE_ALIAS("platform:imx-usb");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CI13xxx i.MX USB binding");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
-- 
1.7.9.5

Re: [PATCH v6 14/14] usb: chipidea: add imx platform driver

[Richard Zhao]

Hi Alex,

Could you Ack the patch if everything is ok?

Thanks
Richard
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 14/14] usb: chipidea: add imx platform driver

[Richard Zhao]

Hi Alex,

Could you Ack the patch if everything is ok?

Thanks
Richard

Re: [PATCH v6 00/14] add imx usb driver based on Greg next tree

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 880 bytes --]

On 06/21/2012 08:41 AM, Richard Zhao wrote:
> The work is based on  ci13xxx rework done by Alexander Shishkin.
> 
> To let Greg pick up, I also added patches Alex queued that I depends on.
> Patch #1 - #9 : It can also be found at
> http://github.com/virtuoso/linux-ci.git ci
> 
> This patch series can also be found at:
> https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
> 
> Status:
>   - this version only support host
>   - usbotg controler works at host role

I'm interested in usb device support on mx28, what has to be implemented
to get it working?

Regards, Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Marc Kleine-Budde]

On 06/21/2012 08:41 AM, Richard Zhao wrote:
> The work is based on  ci13xxx rework done by Alexander Shishkin.
> 
> To let Greg pick up, I also added patches Alex queued that I depends on.
> Patch #1 - #9 : It can also be found at
> http://github.com/virtuoso/linux-ci.git ci
> 
> This patch series can also be found at:
> https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
> 
> Status:
>   - this version only support host
>   - usbotg controler works at host role

I'm interested in usb device support on mx28, what has to be implemented
to get it working?

Regards, Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120621/c88f15db/attachment.sig>

Re: [PATCH v6 00/14] add imx usb driver based on Greg next tree

[Richard Zhao]

On Thu, Jun 21, 2012 at 09:24:39AM +0200, Marc Kleine-Budde wrote:
> On 06/21/2012 08:41 AM, Richard Zhao wrote:
> > The work is based on  ci13xxx rework done by Alexander Shishkin.
> > 
> > To let Greg pick up, I also added patches Alex queued that I depends on.
> > Patch #1 - #9 : It can also be found at
> > http://github.com/virtuoso/linux-ci.git ci
> > 
> > This patch series can also be found at:
> > https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
> > 
> > Status:
> >   - this version only support host
> >   - usbotg controler works at host role
> 
> I'm interested in usb device support on mx28, what has to be implemented
> to get it working?
I don't have patch yet, but on the plan.

Thanks
Richard

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Richard Zhao]

On Thu, Jun 21, 2012 at 09:24:39AM +0200, Marc Kleine-Budde wrote:
> On 06/21/2012 08:41 AM, Richard Zhao wrote:
> > The work is based on  ci13xxx rework done by Alexander Shishkin.
> > 
> > To let Greg pick up, I also added patches Alex queued that I depends on.
> > Patch #1 - #9 : It can also be found at
> > http://github.com/virtuoso/linux-ci.git ci
> > 
> > This patch series can also be found at:
> > https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
> > 
> > Status:
> >   - this version only support host
> >   - usbotg controler works at host role
> 
> I'm interested in usb device support on mx28, what has to be implemented
> to get it working?
I don't have patch yet, but on the plan.

Thanks
Richard

Re: [PATCH v6 00/14] add imx usb driver based on Greg next tree

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1117 bytes --]

On 06/21/2012 10:52 AM, Richard Zhao wrote:
> On Thu, Jun 21, 2012 at 09:24:39AM +0200, Marc Kleine-Budde wrote:
>> On 06/21/2012 08:41 AM, Richard Zhao wrote:
>>> The work is based on  ci13xxx rework done by Alexander Shishkin.
>>>
>>> To let Greg pick up, I also added patches Alex queued that I depends on.
>>> Patch #1 - #9 : It can also be found at
>>> http://github.com/virtuoso/linux-ci.git ci
>>>
>>> This patch series can also be found at:
>>> https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
>>>
>>> Status:
>>>   - this version only support host
>>>   - usbotg controler works at host role
>>
>> I'm interested in usb device support on mx28, what has to be implemented
>> to get it working?
> I don't have patch yet, but on the plan.

What needs to be done? I want to help/implement it.

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Marc Kleine-Budde]

On 06/21/2012 10:52 AM, Richard Zhao wrote:
> On Thu, Jun 21, 2012 at 09:24:39AM +0200, Marc Kleine-Budde wrote:
>> On 06/21/2012 08:41 AM, Richard Zhao wrote:
>>> The work is based on  ci13xxx rework done by Alexander Shishkin.
>>>
>>> To let Greg pick up, I also added patches Alex queued that I depends on.
>>> Patch #1 - #9 : It can also be found at
>>> http://github.com/virtuoso/linux-ci.git ci
>>>
>>> This patch series can also be found at:
>>> https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
>>>
>>> Status:
>>>   - this version only support host
>>>   - usbotg controler works at host role
>>
>> I'm interested in usb device support on mx28, what has to be implemented
>> to get it working?
> I don't have patch yet, but on the plan.

What needs to be done? I want to help/implement it.

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120621/b4d3e8b3/attachment.sig>

Re: [PATCH v6 00/14] add imx usb driver based on Greg next tree

[Richard Zhao]

On Thu, Jun 21, 2012 at 11:10:23AM +0200, Marc Kleine-Budde wrote:
> On 06/21/2012 10:52 AM, Richard Zhao wrote:
> > On Thu, Jun 21, 2012 at 09:24:39AM +0200, Marc Kleine-Budde wrote:
> >> On 06/21/2012 08:41 AM, Richard Zhao wrote:
> >>> The work is based on  ci13xxx rework done by Alexander Shishkin.
> >>>
> >>> To let Greg pick up, I also added patches Alex queued that I depends on.
> >>> Patch #1 - #9 : It can also be found at
> >>> http://github.com/virtuoso/linux-ci.git ci
> >>>
> >>> This patch series can also be found at:
> >>> https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
> >>>
> >>> Status:
> >>>   - this version only support host
> >>>   - usbotg controler works at host role
> >>
> >> I'm interested in usb device support on mx28, what has to be implemented
> >> to get it working?
> > I don't have patch yet, but on the plan.
> 
> What needs to be done? I want to help/implement it.
I didn't have time to look at details yet. Things in FSL kernel may find
a way to implement.

Thanks
Richard
> 
> Marc
> -- 
> Pengutronix e.K.                  | Marc Kleine-Budde           |
> Industrial Linux Solutions        | Phone: +49-231-2826-924     |
> Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
> 

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Richard Zhao]

On Thu, Jun 21, 2012 at 11:10:23AM +0200, Marc Kleine-Budde wrote:
> On 06/21/2012 10:52 AM, Richard Zhao wrote:
> > On Thu, Jun 21, 2012 at 09:24:39AM +0200, Marc Kleine-Budde wrote:
> >> On 06/21/2012 08:41 AM, Richard Zhao wrote:
> >>> The work is based on  ci13xxx rework done by Alexander Shishkin.
> >>>
> >>> To let Greg pick up, I also added patches Alex queued that I depends on.
> >>> Patch #1 - #9 : It can also be found at
> >>> http://github.com/virtuoso/linux-ci.git ci
> >>>
> >>> This patch series can also be found at:
> >>> https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
> >>>
> >>> Status:
> >>>   - this version only support host
> >>>   - usbotg controler works at host role
> >>
> >> I'm interested in usb device support on mx28, what has to be implemented
> >> to get it working?
> > I don't have patch yet, but on the plan.
> 
> What needs to be done? I want to help/implement it.
I didn't have time to look at details yet. Things in FSL kernel may find
a way to implement.

Thanks
Richard
> 
> Marc
> -- 
> Pengutronix e.K.                  | Marc Kleine-Budde           |
> Industrial Linux Solutions        | Phone: +49-231-2826-924     |
> Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |
> 

Re: [PATCH v6 00/14] add imx usb driver based on Greg next tree

[Fabio Estevam]

Hi Richard/Shawn,

On Thu, Jun 21, 2012 at 3:41 AM, Richard Zhao
<richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> wrote:
> The work is based on  ci13xxx rework done by Alexander Shishkin.
>
> To let Greg pick up, I also added patches Alex queued that I depends on.
> Patch #1 - #9 : It can also be found at
> http://github.com/virtuoso/linux-ci.git ci
>
> This patch series can also be found at:
> https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
>
> Status:
>  - this version only support host
>  - usbotg controler works at host role

I am testing this series on a mx23 board and I am getting:

LLLLLLLFCLJUncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.5.0-rc3-00370-g4c6d617-dirty (fabio@fabio-Latitu2
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Freescale i.MX23 (Device Tree), model: i.MX23 Olinuxinod
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa6
[    0.000000] Kernel command line: noinitrd console=ttyAMA0,115200 root=/dev/me
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 64MB = 64MB total
[    0.000000] Memory: 54584k/54584k available, 10952k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc4800000 - 0xff000000   ( 936 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc046506c   (4469 kB)
[    0.000000]       .init : 0xc0466000 - 0xc0487000   ( 132 kB)
[    0.000000]       .data : 0xc0488000 - 0xc04c85c0   ( 258 kB)
[    0.000000]        .bss : 0xc04c85e4 - 0xc0a149e0   (5425 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, 1
[    0.000000] NR_IRQS:304
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps eves
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingr
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.070000] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 512
[    0.080000] CPU: Testing write buffer coherency: ok
[    0.080000] Setting up static identity map for 0x4032adc8 - 0x4032ae20
[    0.090000] devtmpfs: initialized
[    0.110000] pinctrl core: initialized pinctrl subsystem
[    0.110000] dummy:
[    0.120000] NET: Registered protocol family 16
[    0.150000] Serial: AMBA PL011 UART driver
[    0.150000] 80070000.serial: ttyAMA0 at MMIO 0x80070000 (irq = 0) is a PL0112
[    0.320000] console [ttyAMA0] enabled
[    0.360000] bio: create slab <bio-0> at 0
[    0.370000] mxs-dma 80004000.dma-apbh: initialized
[    0.380000] mxs-dma 80024000.dma-apbx: initialized
[    0.390000] usb0_vbus: 5000 mV
[    0.390000] SCSI subsystem initialized
[    0.400000] usbcore: registered new interface driver usbfs
[    0.400000] usbcore: registered new interface driver hub
[    0.410000] usbcore: registered new device driver usb
[    0.410000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.420000] Switching to clocksource mxs_timer
[    0.630000] NET: Registered protocol family 2
[    0.640000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.650000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.660000] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[    0.660000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.670000] TCP: reno registered
[    0.680000] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.680000] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.690000] NET: Registered protocol family 1
[    0.700000] RPC: Registered named UNIX socket transport module.
[    0.700000] RPC: Registered udp transport module.
[    0.710000] RPC: Registered tcp transport module.
[    0.710000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.720000] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.800000] NFS: Registering the id_resolver key type
[    0.810000] Key type id_resolver registered
[    0.820000] msgmni has been set to 106
[    0.820000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[    0.830000] io scheduler noop registered (default)
[    0.840000] uart-pl011 80070000.serial: no DMA platform data
[    0.850000] Initializing USB Mass Storage driver...
[    0.850000] usbcore: registered new interface driver usb-storage
[    0.860000] USB Mass Storage support registered.
[    0.870000] ci_hdrc ci_hdrc.0: doesn't support gadget
[    0.870000] ci_hdrc ci_hdrc.0: ChipIdea HDRC EHCI
[    0.880000] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[    0.940000] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[    0.950000] hub 1-0:1.0: USB hub found
[    0.960000] hub 1-0:1.0: 1 port detected
[    0.970000] mousedev: PS/2 mouse device common for all mice
[    0.970000] i2c /dev entries driver
[    1.020000] mxs-mmc 80010000.ssp: initialized
[    1.030000] usbcore: registered new interface driver usbhid
[    1.040000] usbhid: USB HID core driver
[    1.050000] TCP: cubic registered
[    1.060000] NET: Registered protocol family 17
[    1.070000] Key type dns_resolver registered
[    1.080000] registered taskstats version 1
[    1.080000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.090000] ALSA device list:
[    1.090000]   No soundcards found.
[    1.100000] Waiting for root device /dev/mmcblk0p2...
[    1.120000] mmc0: host does not support reading read-only switch. assuming w.
[    1.130000] mmc0: new high speed SDHC card at address 1234
[    1.140000] mmcblk0: mmc0:1234 SA08G 7.41 GiB
[    1.160000]  mmcblk0: p1 p2
[    1.220000] hub 1-0:1.0: unable to enumerate USB device on port 1

.....

[    2.800000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.020000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.240000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.460000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.680000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.900000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    4.120000] hub 1-0:1.0: unable to enumerate USB device on port 1
... (continues forever)

Any suggestions as to how to make the driver work on mx23?

Thanks,

Fabio Estevam
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Fabio Estevam]

Hi Richard/Shawn,

On Thu, Jun 21, 2012 at 3:41 AM, Richard Zhao
<richard.zhao@freescale.com> wrote:
> The work is based on ?ci13xxx rework done by Alexander Shishkin.
>
> To let Greg pick up, I also added patches Alex queued that I depends on.
> Patch #1 - #9 : It can also be found at
> http://github.com/virtuoso/linux-ci.git ci
>
> This patch series can also be found at:
> https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
>
> Status:
> ?- this version only support host
> ?- usbotg controler works at host role

I am testing this series on a mx23 board and I am getting:

LLLLLLLFCLJUncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Linux version 3.5.0-rc3-00370-g4c6d617-dirty (fabio at fabio-Latitu2
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Freescale i.MX23 (Device Tree), model: i.MX23 Olinuxinod
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa6
[    0.000000] Kernel command line: noinitrd console=ttyAMA0,115200 root=/dev/me
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Memory: 64MB = 64MB total
[    0.000000] Memory: 54584k/54584k available, 10952k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc4800000 - 0xff000000   ( 936 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc046506c   (4469 kB)
[    0.000000]       .init : 0xc0466000 - 0xc0487000   ( 132 kB)
[    0.000000]       .data : 0xc0488000 - 0xc04c85c0   ( 258 kB)
[    0.000000]        .bss : 0xc04c85e4 - 0xc0a149e0   (5425 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, 1
[    0.000000] NR_IRQS:304
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps eves
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingr
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.070000] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 512
[    0.080000] CPU: Testing write buffer coherency: ok
[    0.080000] Setting up static identity map for 0x4032adc8 - 0x4032ae20
[    0.090000] devtmpfs: initialized
[    0.110000] pinctrl core: initialized pinctrl subsystem
[    0.110000] dummy:
[    0.120000] NET: Registered protocol family 16
[    0.150000] Serial: AMBA PL011 UART driver
[    0.150000] 80070000.serial: ttyAMA0 at MMIO 0x80070000 (irq = 0) is a PL0112
[    0.320000] console [ttyAMA0] enabled
[    0.360000] bio: create slab <bio-0> at 0
[    0.370000] mxs-dma 80004000.dma-apbh: initialized
[    0.380000] mxs-dma 80024000.dma-apbx: initialized
[    0.390000] usb0_vbus: 5000 mV
[    0.390000] SCSI subsystem initialized
[    0.400000] usbcore: registered new interface driver usbfs
[    0.400000] usbcore: registered new interface driver hub
[    0.410000] usbcore: registered new device driver usb
[    0.410000] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.420000] Switching to clocksource mxs_timer
[    0.630000] NET: Registered protocol family 2
[    0.640000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.650000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.660000] TCP bind hash table entries: 2048 (order: 4, 73728 bytes)
[    0.660000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.670000] TCP: reno registered
[    0.680000] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    0.680000] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    0.690000] NET: Registered protocol family 1
[    0.700000] RPC: Registered named UNIX socket transport module.
[    0.700000] RPC: Registered udp transport module.
[    0.710000] RPC: Registered tcp transport module.
[    0.710000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.720000] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.800000] NFS: Registering the id_resolver key type
[    0.810000] Key type id_resolver registered
[    0.820000] msgmni has been set to 106
[    0.820000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[    0.830000] io scheduler noop registered (default)
[    0.840000] uart-pl011 80070000.serial: no DMA platform data
[    0.850000] Initializing USB Mass Storage driver...
[    0.850000] usbcore: registered new interface driver usb-storage
[    0.860000] USB Mass Storage support registered.
[    0.870000] ci_hdrc ci_hdrc.0: doesn't support gadget
[    0.870000] ci_hdrc ci_hdrc.0: ChipIdea HDRC EHCI
[    0.880000] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[    0.940000] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[    0.950000] hub 1-0:1.0: USB hub found
[    0.960000] hub 1-0:1.0: 1 port detected
[    0.970000] mousedev: PS/2 mouse device common for all mice
[    0.970000] i2c /dev entries driver
[    1.020000] mxs-mmc 80010000.ssp: initialized
[    1.030000] usbcore: registered new interface driver usbhid
[    1.040000] usbhid: USB HID core driver
[    1.050000] TCP: cubic registered
[    1.060000] NET: Registered protocol family 17
[    1.070000] Key type dns_resolver registered
[    1.080000] registered taskstats version 1
[    1.080000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.090000] ALSA device list:
[    1.090000]   No soundcards found.
[    1.100000] Waiting for root device /dev/mmcblk0p2...
[    1.120000] mmc0: host does not support reading read-only switch. assuming w.
[    1.130000] mmc0: new high speed SDHC card at address 1234
[    1.140000] mmcblk0: mmc0:1234 SA08G 7.41 GiB
[    1.160000]  mmcblk0: p1 p2
[    1.220000] hub 1-0:1.0: unable to enumerate USB device on port 1

.....

[    2.800000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.020000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.240000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.460000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.680000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    3.900000] hub 1-0:1.0: unable to enumerate USB device on port 1
[    4.120000] hub 1-0:1.0: unable to enumerate USB device on port 1
... (continues forever)

Any suggestions as to how to make the driver work on mx23?

Thanks,

Fabio Estevam

Re: [PATCH v6 00/14] add imx usb driver based on Greg next tree

[Shawn Guo]

On Mon, Jun 25, 2012 at 01:18:22PM -0300, Fabio Estevam wrote:
> Any suggestions as to how to make the driver work on mx23?
> 
I won't be able to test it on my imx23-evk board, because the board
design is somehow odd on vbus supply, which probably requires a board
rework.

-- 
Regards,
Shawn

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Shawn Guo]

On Mon, Jun 25, 2012 at 01:18:22PM -0300, Fabio Estevam wrote:
> Any suggestions as to how to make the driver work on mx23?
> 
I won't be able to test it on my imx23-evk board, because the board
design is somehow odd on vbus supply, which probably requires a board
rework.

-- 
Regards,
Shawn

Re: [PATCH v6 00/14] add imx usb driver based on Greg next tree

[Marek Vasut]

Dear Shawn Guo,

> On Mon, Jun 25, 2012 at 01:18:22PM -0300, Fabio Estevam wrote:
> > Any suggestions as to how to make the driver work on mx23?
> 
> I won't be able to test it on my imx23-evk board, because the board
> design is somehow odd on vbus supply, which probably requires a board
> rework.

We should be able to hack around the olinuxino. I just got the card image from 
Tsvetan.

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Marek Vasut]

Dear Shawn Guo,

> On Mon, Jun 25, 2012 at 01:18:22PM -0300, Fabio Estevam wrote:
> > Any suggestions as to how to make the driver work on mx23?
> 
> I won't be able to test it on my imx23-evk board, because the board
> design is somehow odd on vbus supply, which probably requires a board
> rework.

We should be able to hack around the olinuxino. I just got the card image from 
Tsvetan.

Best regards,
Marek Vasut

Re: [PATCH v6 00/14] add imx usb driver based on Greg next tree

[Fabio Estevam]

On Mon, Jun 25, 2012 at 11:37 PM, Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> On Mon, Jun 25, 2012 at 01:18:22PM -0300, Fabio Estevam wrote:
>> Any suggestions as to how to make the driver work on mx23?
>>
> I won't be able to test it on my imx23-evk board, because the board
> design is somehow odd on vbus supply, which probably requires a board
> rework.

Which board rework?

It looks like the 2.6.35 FSL kernel supports USB host on mx23evk
without the need of hardware rework.

Can we try getting USB to work on mx23 too?

Regards,

Fabio Estevam
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 00/14] add imx usb driver based on Greg next tree

[Fabio Estevam]

On Mon, Jun 25, 2012 at 11:37 PM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On Mon, Jun 25, 2012 at 01:18:22PM -0300, Fabio Estevam wrote:
>> Any suggestions as to how to make the driver work on mx23?
>>
> I won't be able to test it on my imx23-evk board, because the board
> design is somehow odd on vbus supply, which probably requires a board
> rework.

Which board rework?

It looks like the 2.6.35 FSL kernel supports USB host on mx23evk
without the need of hardware rework.

Can we try getting USB to work on mx23 too?

Regards,

Fabio Estevam