* [PATCH 00/12] OMAPDSS: Apply LCD manager related parameters
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
The LCD interface drivers(DPI, DSI, RFBI, SDI) do some direct DISPC register
writes to configure LCD manager related fields. This series groups these fields
into a single struct, and let's the interface driver apply these parameters.
This allows us to:
- Check the LCD manager related parameters before applying them.
- Remove some omap_dss_device references as APPLY holds the applied parameters.
Pushed onto the branch:
git://gitorious.org/~boddob/linux-omap-dss2/archit-dss2-clone.git apply_lcd_mgr_params
Tested on 3430SDP, 4430SDP ans Pandaboard ES.
Archit Taneja (12):
OMAPDSS: DISPC: Change return type of dispc_mgr_set_clock_div()
OMAPDSS: Add struct to hold LCD overlay manager configuration
OMAPDSS: DPI: Configure dss_lcd_mgr_config struct with lcd manager
parameters
OMAPDSS: RFBI: Configure dss_lcd_mgr_config struct with lcd manager
parameters
OMAPDSS: DSI: Configure dss_lcd_mgr_config struct with lcd manager
parameters
OMAPDSS: SDI: Configure dss_lcd_mgr_config struct with lcd manager
parameters
OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in
interface drivers
OMAPDSS: MANAGER: Check LCD related overlay manager parameters
OMAPDSS: APPLY: Remove usage of omap_dss_device from manual/auto
update checks
OMAPDSS: DISPC: Remove a redundant function
OMAPDSS: RFBI: Use dss_mgr_enable to enable the overlay manager
OMAPDSS: OVERLAY: Clean up replication checking
drivers/video/omap2/dss/apply.c | 82 ++++++++++++++++++++++++++--
drivers/video/omap2/dss/dispc.c | 31 ++++-------
drivers/video/omap2/dss/display.c | 34 ------------
drivers/video/omap2/dss/dpi.c | 31 ++++++-----
drivers/video/omap2/dss/dsi.c | 108 ++++++++++++++++++++++---------------
drivers/video/omap2/dss/dss.h | 30 +++++++++--
drivers/video/omap2/dss/manager.c | 35 ++++++++++++
drivers/video/omap2/dss/overlay.c | 13 +++++
drivers/video/omap2/dss/rfbi.c | 39 ++++++++++----
drivers/video/omap2/dss/sdi.c | 32 +++++------
10 files changed, 286 insertions(+), 149 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 01/12] MAPDSS: DISPC: Change return type of dispc_mgr_set_clock_div()
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
dipsc_mgr_set_clock div has an int return type to report errors or success.
The function doesn't really check for errors and always returns 0. Change
the return type to void.
Checking for the correct DISPC clock divider ranges will be done when a DSS2
user does a manager apply. This support will be added later.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dispc.c | 4 +---
drivers/video/omap2/dss/dpi.c | 10 ++--------
drivers/video/omap2/dss/dsi.c | 6 +-----
drivers/video/omap2/dss/dss.h | 2 +-
drivers/video/omap2/dss/sdi.c | 5 +----
5 files changed, 6 insertions(+), 21 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 864adcc..b047fe6 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3184,15 +3184,13 @@ int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
return 0;
}
-int dispc_mgr_set_clock_div(enum omap_channel channel,
+void dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo)
{
DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div);
DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div);
dispc_mgr_set_lcd_divisor(channel, cinfo->lck_div, cinfo->pck_div);
-
- return 0;
}
int dispc_mgr_get_clock_div(enum omap_channel channel,
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 046a6fb..af01430 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -100,11 +100,7 @@ static int dpi_set_dsi_clk(struct omap_dss_device *dssdev,
dss_select_dispc_clk_source(clks->dispc.fclk_src);
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r) {
- dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
- return r;
- }
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
*fck = dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
*lck_div = dispc_cinfo.lck_div;
@@ -129,9 +125,7 @@ static int dpi_set_dispc_clk(struct omap_dss_device *dssdev,
if (r)
return r;
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
- return r;
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
*fck = dss_cinfo.fck;
*lck_div = dispc_cinfo.lck_div;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 9f08787..94ff3aa 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4456,11 +4456,7 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev,
return r;
}
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r) {
- DSSERR("Failed to set dispc clocks\n");
- return r;
- }
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
return 0;
}
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 20151d5..f8289e9 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -416,7 +416,7 @@ void dispc_mgr_set_timings(enum omap_channel channel,
unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
unsigned long dispc_core_clk_rate(void);
-int dispc_mgr_set_clock_div(enum omap_channel channel,
+void dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
int dispc_mgr_get_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index b44ab72..0b2659f 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -106,9 +106,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_set_dss_clock_div;
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
- goto err_set_dispc_clock_div;
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
@@ -125,7 +123,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
err_mgr_enable:
dss_sdi_disable();
err_sdi_enable:
-err_set_dispc_clock_div:
err_set_dss_clock_div:
err_calc_clock_div:
dispc_runtime_put();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 01/12] OMAPDSS: DISPC: Change return type of dispc_mgr_set_clock_div()
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
dipsc_mgr_set_clock div has an int return type to report errors or success.
The function doesn't really check for errors and always returns 0. Change
the return type to void.
Checking for the correct DISPC clock divider ranges will be done when a DSS2
user does a manager apply. This support will be added later.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dispc.c | 4 +---
drivers/video/omap2/dss/dpi.c | 10 ++--------
drivers/video/omap2/dss/dsi.c | 6 +-----
drivers/video/omap2/dss/dss.h | 2 +-
drivers/video/omap2/dss/sdi.c | 5 +----
5 files changed, 6 insertions(+), 21 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 864adcc..b047fe6 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3184,15 +3184,13 @@ int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
return 0;
}
-int dispc_mgr_set_clock_div(enum omap_channel channel,
+void dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo)
{
DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div);
DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div);
dispc_mgr_set_lcd_divisor(channel, cinfo->lck_div, cinfo->pck_div);
-
- return 0;
}
int dispc_mgr_get_clock_div(enum omap_channel channel,
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 046a6fb..af01430 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -100,11 +100,7 @@ static int dpi_set_dsi_clk(struct omap_dss_device *dssdev,
dss_select_dispc_clk_source(clks->dispc.fclk_src);
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r) {
- dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
- return r;
- }
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
*fck = dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
*lck_div = dispc_cinfo.lck_div;
@@ -129,9 +125,7 @@ static int dpi_set_dispc_clk(struct omap_dss_device *dssdev,
if (r)
return r;
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
- return r;
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
*fck = dss_cinfo.fck;
*lck_div = dispc_cinfo.lck_div;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 9f08787..94ff3aa 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4456,11 +4456,7 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev,
return r;
}
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r) {
- DSSERR("Failed to set dispc clocks\n");
- return r;
- }
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
return 0;
}
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 20151d5..f8289e9 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -416,7 +416,7 @@ void dispc_mgr_set_timings(enum omap_channel channel,
unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
unsigned long dispc_core_clk_rate(void);
-int dispc_mgr_set_clock_div(enum omap_channel channel,
+void dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
int dispc_mgr_get_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index b44ab72..0b2659f 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -106,9 +106,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_set_dss_clock_div;
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
- goto err_set_dispc_clock_div;
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
@@ -125,7 +123,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
err_mgr_enable:
dss_sdi_disable();
err_sdi_enable:
-err_set_dispc_clock_div:
err_set_dss_clock_div:
err_calc_clock_div:
dispc_runtime_put();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 02/12] OMAPDSS: Add struct to hold LCD overlay manager configuration
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a struct dss_lcd_mgr_config which holds LCD overlay manager related
parameters. These are currently partially contained in the omap_dss_device
connected to the manager, and the rest are in the interface driver.
The parameters are directly written to the DISPC registers in the interface
drivers. These should eventually be applied at the correct time using the
shadow register programming model. This struct would help in grouping these
parameters so that they can be applied together.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dss.h | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index f8289e9..6688eaf 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -152,6 +152,19 @@ struct dsi_clock_info {
u16 lp_clk_div;
};
+struct dss_lcd_mgr_config {
+ enum dss_io_pad_mode io_pad_mode;
+
+ bool stallmode;
+ bool fifohandcheck;
+
+ struct dispc_clock_info clock_info;
+
+ int video_port_width;
+
+ int lcden_sig_polarity;
+};
+
struct seq_file;
struct platform_device;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 03/12] OMAPDSS: DPI: Configure dss_lcd_mgr_config struct with lcd manager parameters
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a dss_lcd_mgr_config struct instance in DPI. Fill up all the parameters
of the struct with configurations held by the panel, and the configurations
required by DPI.
Use these to write to the DISPC registers. These direct register writes would be
later replaced by a function which applies the configuration using the shadow
register programming model.
The DISPC_DIVISORo registers were written in the functions dpi_set_dispc_clk()
and dpi_set_dsi_clk(), now they just fill up the dispc_clock_info parameter in
mgr_config. They are written later in dpi_config_lcd_manager.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dpi.c | 37 ++++++++++++++++++++++++++++---------
1 file changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index af01430..a3a012b 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -38,6 +38,8 @@
static struct {
struct regulator *vdds_dsi_reg;
struct platform_device *dsidev;
+
+ struct dss_lcd_mgr_config mgr_config;
} dpi;
static struct platform_device *dpi_get_dsidev(enum omap_dss_clk_source clk)
@@ -100,7 +102,7 @@ static int dpi_set_dsi_clk(struct omap_dss_device *dssdev,
dss_select_dispc_clk_source(clks->dispc.fclk_src);
- dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ dpi.mgr_config.clock_info = dispc_cinfo;
*fck = dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
*lck_div = dispc_cinfo.lck_div;
@@ -125,7 +127,7 @@ static int dpi_set_dispc_clk(struct omap_dss_device *dssdev,
if (r)
return r;
- dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ dpi.mgr_config.clock_info = dispc_cinfo;
*fck = dss_cinfo.fck;
*lck_div = dispc_cinfo.lck_div;
@@ -166,15 +168,32 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
return 0;
}
-static void dpi_basic_init(struct omap_dss_device *dssdev)
+static void dpi_config_lcd_manager(struct omap_dss_device *dssdev)
{
- dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_BYPASS);
- dispc_mgr_enable_stallmode(dssdev->manager->id, false);
+ dpi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dpi.mgr_config.stallmode = false;
+ dpi.mgr_config.fifohandcheck = false;
+
+ dpi.mgr_config.video_port_width = dssdev->phy.dpi.data_lines;
+
+ dpi.mgr_config.lcden_sig_polarity = false;
+
+ dispc_mgr_set_io_pad_mode(dpi.mgr_config.io_pad_mode);
+ dispc_mgr_enable_stallmode(dssdev->manager->id,
+ dpi.mgr_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
+ dpi.mgr_config.fifohandcheck);
dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- dssdev->phy.dpi.data_lines);
+ dpi.mgr_config.video_port_width);
+
+ dispc_mgr_set_clock_div(dssdev->manager->id,
+ &dpi.mgr_config.clock_info);
+
+ dispc_lcd_enable_signal_polarity(dpi.mgr_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
}
int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
@@ -213,8 +232,6 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_get_dispc;
- dpi_basic_init(dssdev);
-
if (dpi_use_dsi_pll(dssdev)) {
r = dsi_runtime_get(dpi.dsidev);
if (r)
@@ -229,6 +246,8 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_set_mode;
+ dpi_config_lcd_manager(dssdev);
+
mdelay(2);
r = dss_mgr_enable(dssdev->manager);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 04/12] OMAPDSS: RFBI: Configure dss_lcd_mgr_config struct with lcd manager parameters
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a dss_lcd_mgr_config struct instance in RFBI. Fill up all the parameters
of the struct with configurations held by the panel, and the configurations
required by RFBI.
Use these to write to the DISPC registers. These direct register writes would be
later replaced by a function which applies the configuration using the shadow
register programming model.
Create function rfbi_config_lcd_manager() which fills up the mgr_config
parameters and writes to the DISPC regs.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/rfbi.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 45084d8..847f694 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -859,6 +859,33 @@ static void rfbi_dump_regs(struct seq_file *s)
#undef DUMPREG
}
+static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
+{
+ struct dss_lcd_mgr_config mgr_config;
+
+ mgr_config.io_pad_mode = DSS_IO_PAD_MODE_RFBI;
+
+ mgr_config.stallmode = true;
+ /* Do we need fifohandcheck for RFBI? */
+ mgr_config.fifohandcheck = false;
+
+ mgr_config.video_port_width = dssdev->ctrl.pixel_size;
+ mgr_config.lcden_sig_polarity = 0;
+
+ dispc_mgr_set_io_pad_mode(mgr_config.io_pad_mode);
+
+ dispc_mgr_enable_stallmode(dssdev->manager->id, mgr_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
+ mgr_config.fifohandcheck);
+
+ dispc_mgr_set_tft_data_lines(dssdev->manager->id,
+ mgr_config.video_port_width);
+
+ dispc_lcd_enable_signal_polarity(mgr_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+}
+
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
{
int r;
@@ -885,12 +912,7 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
goto err1;
}
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
-
- dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_RFBI);
- dispc_mgr_enable_stallmode(dssdev->manager->id, true);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id, dssdev->ctrl.pixel_size);
+ rfbi_config_lcd_manager(dssdev);
rfbi_configure(dssdev->phy.rfbi.channel,
dssdev->ctrl.pixel_size,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 05/12] OMAPDSS: DSI: Configure dss_lcd_mgr_config struct with lcd manager parameters
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a dss_lcd_mgr_config struct instance in DSI. Fill up all the parameters
of the struct with configurations held by the panel, and the configurations
required by DSI.
Use these to write to the DISPC registers. These direct register writes would be
later replaced by a function which applies the configuration using the shadow
register programming model.
The function dsi_configure_dispc_clocks() is now called in
dsi_display_init_dispc(), this lets all the lcd manager related configurations
happen in the same place. The DISPC_DIVISORo register was written in
dsi_configure_dispc_clock(), now it just fills up the dispc_clock_info parameter
in mgr_config. The clock_info is written later in dsi_display_init_dispc().
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dsi.c | 117 ++++++++++++++++++++++++++++-------------
1 file changed, 80 insertions(+), 37 deletions(-)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 94ff3aa..df92e24 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -331,6 +331,8 @@ struct dsi_data {
unsigned num_lanes_used;
unsigned scp_clk_refcount;
+
+ struct dss_lcd_mgr_config mgr_config;
};
struct dsi_packet_sent_handler_data {
@@ -4339,14 +4341,42 @@ EXPORT_SYMBOL(omap_dsi_update);
/* Display funcs */
-static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
+static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev,
+ const struct omapdss_lcd_clock_config *lcd_clks)
{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ struct dispc_clock_info dispc_cinfo;
int r;
+ unsigned long long fck;
+
+ fck = dsi_get_pll_hsdiv_dispc_rate(dsidev);
+
+ dispc_cinfo.lck_div = lcd_clks->lck_div;
+ dispc_cinfo.pck_div = lcd_clks->pck_div;
+
+ r = dispc_calc_clock_rates(fck, &dispc_cinfo);
+ if (r) {
+ DSSERR("Failed to calc dispc clocks\n");
+ return r;
+ }
+
+ dsi->mgr_config.clock_info = dispc_cinfo;
+
+ return 0;
+}
+
+static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct omap_video_timings timings;
+ const struct omapdss_clock_config *clks;
+ int r, lcd_id;
+ u32 irq;
if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE) {
u16 dw, dh;
- u32 irq;
dssdev->driver->get_resolution(dssdev, &dw, &dh);
@@ -4366,16 +4396,16 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
(void *) dssdev, irq);
if (r) {
DSSERR("can't get FRAMEDONE irq\n");
- return r;
+ goto err;
}
- dispc_mgr_enable_stallmode(dssdev->manager->id, true);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 1);
+ dsi->mgr_config.stallmode = true;
+ dsi->mgr_config.fifohandcheck = true;
} else {
timings = dssdev->panel.timings;
- dispc_mgr_enable_stallmode(dssdev->manager->id, false);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 0);
+ dsi->mgr_config.stallmode = false;
+ dsi->mgr_config.fifohandcheck = false;
}
/*
@@ -4391,12 +4421,53 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
dss_mgr_set_timings(dssdev->manager, &timings);
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ clks = dss_get_platform_clock_config();
+
+ switch (dssdev->manager->id) {
+ case OMAP_DSS_CHANNEL_LCD:
+ lcd_id = 0;
+ break;
+ case OMAP_DSS_CHANNEL_LCD2:
+ lcd_id = 1;
+ break;
+ default:
+ r = -EINVAL;
+ goto err1;
+ }
+
+ r = dsi_configure_dispc_clocks(dssdev, &clks->lcd[lcd_id]);
+ if (r)
+ goto err1;
+
+ dsi->mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
+ dsi->mgr_config.video_port_width =
+ dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+ dsi->mgr_config.lcden_sig_polarity = 0;
+
+ dispc_mgr_set_io_pad_mode(dsi->mgr_config.io_pad_mode);
+
+ dispc_mgr_enable_stallmode(dssdev->manager->id,
+ dsi->mgr_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
+ dsi->mgr_config.fifohandcheck);
+
+ dispc_mgr_set_clock_div(dssdev->manager->id,
+ &dsi->mgr_config.clock_info);
dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt));
+ dsi->mgr_config.video_port_width);
+
+ dispc_lcd_enable_signal_polarity(dsi->mgr_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
return 0;
+err1:
+ if (dssdev->panel.dsi_mode == OMAP_DSS_DSI_CMD_MODE)
+ omap_dispc_unregister_isr(dsi_framedone_irq_callback,
+ (void *) dssdev, irq);
+err:
+ return r;
}
static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
@@ -4437,30 +4508,6 @@ static int dsi_configure_dsi_clocks(struct platform_device *dsidev,
return 0;
}
-static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev,
- const struct omapdss_lcd_clock_config *lcd_clks)
-{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
- struct dispc_clock_info dispc_cinfo;
- int r;
- unsigned long long fck;
-
- fck = dsi_get_pll_hsdiv_dispc_rate(dsidev);
-
- dispc_cinfo.lck_div = lcd_clks->lck_div;
- dispc_cinfo.pck_div = lcd_clks->pck_div;
-
- r = dispc_calc_clock_rates(fck, &dispc_cinfo);
- if (r) {
- DSSERR("Failed to calc dispc clocks\n");
- return r;
- }
-
- dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
-
- return 0;
-}
-
static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -4499,10 +4546,6 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
DSSDBG("PLL OK\n");
- r = dsi_configure_dispc_clocks(dssdev, &clks->lcd[lcd_id]);
- if (r)
- goto err2;
-
r = dsi_cio_init(dssdev);
if (r)
goto err2;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 06/12] OMAPDSS: SDI: Configure dss_lcd_mgr_config struct with lcd manager parameters
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a dss_lcd_mgr_config struct instance in SDI. Fill up all the parameters
of the struct with configurations held by the panel, and the configurations
required by SDI.
Use these to write to the DISPC registers. These direct register writes would be
later replaced by a function which applies the configuration using the shadow
register programming model.
Create function sdi_config_lcd_manager() which fills the mgr_config parameters
and writes to the DISPC registers
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/sdi.c | 42 +++++++++++++++++++++++++----------------
1 file changed, 26 insertions(+), 16 deletions(-)
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 0b2659f..f6cd96c 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -32,18 +32,34 @@
static struct {
bool update_enabled;
struct regulator *vdds_sdi_reg;
-} sdi;
-static void sdi_basic_init(struct omap_dss_device *dssdev)
+ struct dss_lcd_mgr_config mgr_config;
+} sdi;
+static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
{
- dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_BYPASS);
- dispc_mgr_enable_stallmode(dssdev->manager->id, false);
+ sdi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ sdi.mgr_config.stallmode = false;
+ sdi.mgr_config.fifohandcheck = false;
+
+ sdi.mgr_config.video_port_width = 24;
+ sdi.mgr_config.lcden_sig_polarity = 1;
+
+ dispc_mgr_set_io_pad_mode(sdi.mgr_config.io_pad_mode);
+ dispc_mgr_enable_stallmode(dssdev->manager->id,
+ sdi.mgr_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
+ sdi.mgr_config.fifohandcheck);
- dispc_mgr_set_tft_data_lines(dssdev->manager->id, 24);
- dispc_lcd_enable_signal_polarity(1);
+ dispc_mgr_set_clock_div(dssdev->manager->id,
+ &sdi.mgr_config.clock_info);
+
+ dispc_mgr_set_tft_data_lines(dssdev->manager->id,
+ sdi.mgr_config.video_port_width);
+ dispc_lcd_enable_signal_polarity(sdi.mgr_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
}
int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
@@ -51,8 +67,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
struct omap_video_timings *t = &dssdev->panel.timings;
struct dss_clock_info dss_cinfo;
struct dispc_clock_info dispc_cinfo;
- u16 lck_div, pck_div;
- unsigned long fck;
unsigned long pck;
int r;
@@ -75,8 +89,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_get_dispc;
- sdi_basic_init(dssdev);
-
/* 15.5.9.1.2 */
dssdev->panel.timings.pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
dssdev->panel.timings.hsync_vsync_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
@@ -85,11 +97,9 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_calc_clock_div;
- fck = dss_cinfo.fck;
- lck_div = dispc_cinfo.lck_div;
- pck_div = dispc_cinfo.pck_div;
+ sdi.mgr_config.clock_info = dispc_cinfo;
- pck = fck / lck_div / pck_div / 1000;
+ pck = dss_cinfo.fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div / 1000;
if (pck != t->pixel_clock) {
DSSWARN("Could not find exact pixel clock. Requested %d kHz, "
@@ -106,7 +116,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_set_dss_clock_div;
- dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ sdi_config_lcd_manager(dssdev);
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drivers
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Replace the DISPC fuctions used to configure LCD channel related manager
parameters with dss_mgr_set_lcd_config() in APPLY. This function ensures that
the DISPC registers are written at the right time by using the shadow register
programming model.
The LCD manager configurations is stored as a private data of manager in APPLY.
It is treated as an extra info as it's the panel drivers which trigger this
apply via interface drivers, and not a DSS2 user like omapfb or omapdrm.
Storing LCD manager related properties in APPLY also prevents the need to refer
to the panel connected to the manager for information. This helps in making the
DSS driver less dependent on panel.
A helper function is added to check whether the manager is LCD or TV. The direct
DISPC register writes are removed from the interface drivers.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/apply.c | 65 +++++++++++++++++++++++++++++++++++++++
drivers/video/omap2/dss/dpi.c | 16 +---------
drivers/video/omap2/dss/dsi.c | 17 +---------
drivers/video/omap2/dss/dss.h | 10 ++++++
drivers/video/omap2/dss/rfbi.c | 13 +-------
drivers/video/omap2/dss/sdi.c | 15 +--------
6 files changed, 79 insertions(+), 57 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 3ce7a3e..bb4ec63 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -104,6 +104,7 @@ struct mgr_priv_data {
bool shadow_extra_info_dirty;
struct omap_video_timings timings;
+ struct dss_lcd_mgr_config lcd_config;
};
static struct {
@@ -137,6 +138,7 @@ static struct mgr_priv_data *get_mgr_priv(struct omap_overlay_manager *mgr)
void dss_apply_init(void)
{
const int num_ovls = dss_feat_get_num_ovls();
+ struct mgr_priv_data *mp;
int i;
spin_lock_init(&data_lock);
@@ -168,6 +170,16 @@ void dss_apply_init(void)
op->user_info = op->info;
}
+
+ /*
+ * Initialize some of the lcd_config fields for TV manager, this lets
+ * us prevent checking if the manager is LCD or TV at some places
+ */
+ mp = &dss_data.mgr_priv_data_array[OMAP_DSS_CHANNEL_DIGIT];
+
+ mp->lcd_config.video_port_width = 24;
+ mp->lcd_config.clock_info.lck_div = 1;
+ mp->lcd_config.clock_info.pck_div = 1;
}
static bool ovl_manual_update(struct omap_overlay *ovl)
@@ -633,6 +645,24 @@ static void dss_mgr_write_regs_extra(struct omap_overlay_manager *mgr)
dispc_mgr_set_timings(mgr->id, &mp->timings);
+ /* lcd_config parameters */
+ if (dss_mgr_is_lcd(mgr->id)) {
+ dispc_mgr_set_io_pad_mode(mp->lcd_config.io_pad_mode);
+
+ dispc_mgr_enable_stallmode(mgr->id, mp->lcd_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(mgr->id,
+ mp->lcd_config.fifohandcheck);
+
+ dispc_mgr_set_clock_div(mgr->id, &mp->lcd_config.clock_info);
+
+ dispc_mgr_set_tft_data_lines(mgr->id,
+ mp->lcd_config.video_port_width);
+
+ dispc_lcd_enable_signal_polarity(mp->lcd_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(mgr->id);
+ }
+
mp->extra_info_dirty = false;
if (mp->updating)
mp->shadow_extra_info_dirty = true;
@@ -1292,6 +1322,41 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
mutex_unlock(&apply_lock);
}
+static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
+ struct dss_lcd_mgr_config config)
+{
+ struct mgr_priv_data *mp = get_mgr_priv(mgr);
+
+ mp->lcd_config = config;
+ mp->extra_info_dirty = true;
+}
+
+void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
+ struct dss_lcd_mgr_config config)
+{
+ unsigned long flags;
+ struct mgr_priv_data *mp = get_mgr_priv(mgr);
+
+ mutex_lock(&apply_lock);
+
+ if (mp->enabled)
+ goto out;
+
+ spin_lock_irqsave(&data_lock, flags);
+
+ dss_apply_mgr_lcd_config(mgr, config);
+
+ dss_write_regs();
+ dss_set_go_bits();
+
+ spin_unlock_irqrestore(&data_lock, flags);
+
+ wait_pending_extra_info_updates();
+
+out:
+ mutex_unlock(&apply_lock);
+}
+
int dss_ovl_set_info(struct omap_overlay *ovl,
struct omap_overlay_info *info)
{
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index a3a012b..c10c0f8 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -179,21 +179,7 @@ static void dpi_config_lcd_manager(struct omap_dss_device *dssdev)
dpi.mgr_config.lcden_sig_polarity = false;
- dispc_mgr_set_io_pad_mode(dpi.mgr_config.io_pad_mode);
- dispc_mgr_enable_stallmode(dssdev->manager->id,
- dpi.mgr_config.stallmode);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
- dpi.mgr_config.fifohandcheck);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- dpi.mgr_config.video_port_width);
-
- dispc_mgr_set_clock_div(dssdev->manager->id,
- &dpi.mgr_config.clock_info);
-
- dispc_lcd_enable_signal_polarity(dpi.mgr_config.lcden_sig_polarity);
-
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dss_mgr_set_lcd_config(dssdev->manager, dpi.mgr_config);
}
int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index df92e24..0ae85e2 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4444,22 +4444,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
dsi->mgr_config.lcden_sig_polarity = 0;
- dispc_mgr_set_io_pad_mode(dsi->mgr_config.io_pad_mode);
-
- dispc_mgr_enable_stallmode(dssdev->manager->id,
- dsi->mgr_config.stallmode);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
- dsi->mgr_config.fifohandcheck);
-
- dispc_mgr_set_clock_div(dssdev->manager->id,
- &dsi->mgr_config.clock_info);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- dsi->mgr_config.video_port_width);
-
- dispc_lcd_enable_signal_polarity(dsi->mgr_config.lcden_sig_polarity);
-
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dss_mgr_set_lcd_config(dssdev->manager, dsi->mgr_config);
return 0;
err1:
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 6688eaf..b4c52ec 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -202,6 +202,8 @@ int dss_mgr_set_device(struct omap_overlay_manager *mgr,
int dss_mgr_unset_device(struct omap_overlay_manager *mgr);
void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
struct omap_video_timings *timings);
+void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
+ struct dss_lcd_mgr_config config);
const struct omap_video_timings *dss_mgr_get_timings(struct omap_overlay_manager *mgr);
bool dss_ovl_is_enabled(struct omap_overlay *ovl);
@@ -235,6 +237,14 @@ int dss_mgr_check(struct omap_overlay_manager *mgr,
const struct omap_video_timings *mgr_timings,
struct omap_overlay_info **overlay_infos);
+static inline bool dss_mgr_is_lcd(enum omap_channel id)
+{
+ if (id == OMAP_DSS_CHANNEL_LCD || id == OMAP_DSS_CHANNEL_LCD2)
+ return true;
+ else
+ return false;
+}
+
/* overlay */
void dss_init_overlays(struct platform_device *pdev);
void dss_uninit_overlays(struct platform_device *pdev);
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 847f694..0376056 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -872,18 +872,7 @@ static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
mgr_config.video_port_width = dssdev->ctrl.pixel_size;
mgr_config.lcden_sig_polarity = 0;
- dispc_mgr_set_io_pad_mode(mgr_config.io_pad_mode);
-
- dispc_mgr_enable_stallmode(dssdev->manager->id, mgr_config.stallmode);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
- mgr_config.fifohandcheck);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- mgr_config.video_port_width);
-
- dispc_lcd_enable_signal_polarity(mgr_config.lcden_sig_polarity);
-
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dss_mgr_set_lcd_config(dssdev->manager, mgr_config);
}
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index f6cd96c..b8dc13c 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -46,20 +46,7 @@ static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
sdi.mgr_config.video_port_width = 24;
sdi.mgr_config.lcden_sig_polarity = 1;
- dispc_mgr_set_io_pad_mode(sdi.mgr_config.io_pad_mode);
- dispc_mgr_enable_stallmode(dssdev->manager->id,
- sdi.mgr_config.stallmode);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
- sdi.mgr_config.fifohandcheck);
-
- dispc_mgr_set_clock_div(dssdev->manager->id,
- &sdi.mgr_config.clock_info);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- sdi.mgr_config.video_port_width);
- dispc_lcd_enable_signal_polarity(sdi.mgr_config.lcden_sig_polarity);
-
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dss_mgr_set_lcd_config(dssdev->manager, sdi.mgr_config);
}
int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 08/12] OMAPDSS: MANAGER: Check LCD related overlay manager parameters
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
The LCD related manager configurations are a part of the manager's private data
in APPLY. Pass this to dss_lcd_mgr_config to dss_mgr_check and create a function
to check the validity of some of the configurations.
To check some of the configurations, we require information of interface to
which the manager output is connected. These can be added once interfaces are
represented as an entity.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/apply.c | 2 +-
drivers/video/omap2/dss/dss.h | 1 +
drivers/video/omap2/dss/manager.c | 35 +++++++++++++++++++++++++++++++++++
3 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index bb4ec63..95a6713 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -226,7 +226,7 @@ static int dss_check_settings_low(struct omap_overlay_manager *mgr,
ois[ovl->id] = oi;
}
- return dss_mgr_check(mgr, mi, &mp->timings, ois);
+ return dss_mgr_check(mgr, mi, &mp->timings, &mp->lcd_config, ois);
}
/*
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index b4c52ec..cb859e3 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -235,6 +235,7 @@ int dss_mgr_check_timings(struct omap_overlay_manager *mgr,
int dss_mgr_check(struct omap_overlay_manager *mgr,
struct omap_overlay_manager_info *info,
const struct omap_video_timings *mgr_timings,
+ const struct dss_lcd_mgr_config *config,
struct omap_overlay_info **overlay_infos);
static inline bool dss_mgr_is_lcd(enum omap_channel id)
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 0cbcde4..09540bc 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -665,9 +665,40 @@ int dss_mgr_check_timings(struct omap_overlay_manager *mgr,
return 0;
}
+static int dss_mgr_check_lcd_config(struct omap_overlay_manager *mgr,
+ const struct dss_lcd_mgr_config *config)
+{
+ struct dispc_clock_info cinfo = config->clock_info;
+ int dl = config->video_port_width;
+ bool stallmode = config->stallmode;
+ bool fifohandcheck = config->fifohandcheck;
+
+ if (cinfo.lck_div < 1 || cinfo.lck_div > 255)
+ return -EINVAL;
+
+ if (cinfo.pck_div < 1 || cinfo.pck_div > 255)
+ return -EINVAL;
+
+ if (dl != 12 && dl != 16 && dl != 18 && dl != 24)
+ return -EINVAL;
+
+ /* fifohandcheck should be used only with stallmode */
+ if (stallmode == false && fifohandcheck == true)
+ return -EINVAL;
+
+ /*
+ * io pad mode can be only checked by using dssdev connected to the
+ * manager. Ignore checking these for now, add checks when manager
+ * is capable of holding information related to the connected interface
+ */
+
+ return 0;
+}
+
int dss_mgr_check(struct omap_overlay_manager *mgr,
struct omap_overlay_manager_info *info,
const struct omap_video_timings *mgr_timings,
+ const struct dss_lcd_mgr_config *lcd_config,
struct omap_overlay_info **overlay_infos)
{
struct omap_overlay *ovl;
@@ -683,6 +714,10 @@ int dss_mgr_check(struct omap_overlay_manager *mgr,
if (r)
return r;
+ r = dss_mgr_check_lcd_config(mgr, lcd_config);
+ if (r)
+ return r;
+
list_for_each_entry(ovl, &mgr->overlays, list) {
struct omap_overlay_info *oi;
int r;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 09/12] OMAPDSS: APPLY: Remove usage of omap_dss_device from manual/auto update checks
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
APPLY needs to know at certain places whether an overlay manager is in manual
or auto update mode. The caps of the connected omap_dss_device were used to
check that.
A LCD manager is in manual update if stallmode is enabled for that manager. TV
managers for now always auto update.
Return the value of stallmode parameter in the private data 'lcd_confg' in
mgr_manual_update() and ovl_manual_update(), for TV managers stallmode field
will be false by default.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/apply.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 95a6713..b9c6e75 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -182,14 +182,23 @@ void dss_apply_init(void)
mp->lcd_config.clock_info.pck_div = 1;
}
+/*
+ * A LCD manager's stallmode decides whether it is in manual or auto update. TV
+ * manager is always auto update, stallmode field for TV manager is false by
+ * default
+ */
static bool ovl_manual_update(struct omap_overlay *ovl)
{
- return ovl->manager->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+ struct mgr_priv_data *mp = get_mgr_priv(ovl->manager);
+
+ return mp->lcd_config.stallmode;
}
static bool mgr_manual_update(struct omap_overlay_manager *mgr)
{
- return mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+ struct mgr_priv_data *mp = get_mgr_priv(mgr);
+
+ return mp->lcd_config.stallmode;
}
static int dss_check_settings_low(struct omap_overlay_manager *mgr,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 10/12] OMAPDSS: DISPC: Remove a redundant function
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
dss_mgr_is_lcd() available in dss.h does the same thing as dispc_mgr_is_lcd()
in dispc.c. Remove the function from dispc.c and replace it with the one in
dss.h.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dispc.c | 27 +++++++++------------------
1 file changed, 9 insertions(+), 18 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b047fe6..0e0b89c 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -387,15 +387,6 @@ void dispc_runtime_put(void)
WARN_ON(r < 0);
}
-static inline bool dispc_mgr_is_lcd(enum omap_channel channel)
-{
- if (channel == OMAP_DSS_CHANNEL_LCD ||
- channel == OMAP_DSS_CHANNEL_LCD2)
- return true;
- else
- return false;
-}
-
u32 dispc_mgr_get_vsync_irq(enum omap_channel channel)
{
switch (channel) {
@@ -430,7 +421,7 @@ bool dispc_mgr_go_busy(enum omap_channel channel)
{
int bit;
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
bit = 5; /* GOLCD */
else
bit = 6; /* GODIGIT */
@@ -446,7 +437,7 @@ void dispc_mgr_go(enum omap_channel channel)
int bit;
bool enable_bit, go_bit;
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
bit = 0; /* LCDENABLE */
else
bit = 1; /* DIGITALENABLE */
@@ -460,7 +451,7 @@ void dispc_mgr_go(enum omap_channel channel)
if (!enable_bit)
return;
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
bit = 5; /* GOLCD */
else
bit = 6; /* GODIGIT */
@@ -939,7 +930,7 @@ static void dispc_mgr_set_cpr_coef(enum omap_channel channel,
{
u32 coef_r, coef_g, coef_b;
- if (!dispc_mgr_is_lcd(channel))
+ if (!dss_mgr_is_lcd(channel))
return;
coef_r = FLD_VAL(coefs->rr, 31, 22) | FLD_VAL(coefs->rg, 20, 11) |
@@ -1798,7 +1789,7 @@ static int check_horiz_timing_omap3(enum omap_channel channel,
nonactive = t->x_res + t->hfp + t->hsw + t->hbp - out_width;
pclk = dispc_mgr_pclk_rate(channel);
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
lclk = dispc_mgr_lclk_rate(channel);
else
lclk = dispc_fclk_rate();
@@ -2398,7 +2389,7 @@ bool dispc_mgr_is_enabled(enum omap_channel channel)
void dispc_mgr_enable(enum omap_channel channel, bool enable)
{
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
dispc_mgr_enable_lcd_out(channel, enable);
else if (channel == OMAP_DSS_CHANNEL_DIGIT)
dispc_mgr_enable_digit_out(enable);
@@ -2610,7 +2601,7 @@ bool dispc_mgr_timings_ok(enum omap_channel channel,
timings_ok = _dispc_mgr_size_ok(timings->x_res, timings->y_res);
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
timings_ok = timings_ok && _dispc_lcd_timings_ok(timings->hsw,
timings->hfp, timings->hbp,
timings->vsw, timings->vfp,
@@ -2702,7 +2693,7 @@ void dispc_mgr_set_timings(enum omap_channel channel,
return;
}
- if (dispc_mgr_is_lcd(channel)) {
+ if (dss_mgr_is_lcd(channel)) {
_dispc_mgr_set_lcd_timings(channel, t.hsw, t.hfp, t.hbp, t.vsw,
t.vfp, t.vbp, t.vsync_level, t.hsync_level,
t.pclk_edge, t.de_level, t.hsync_vsync_edge);
@@ -2808,7 +2799,7 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
{
unsigned long r;
- if (dispc_mgr_is_lcd(channel)) {
+ if (dss_mgr_is_lcd(channel)) {
int pcd;
u32 l;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 11/12] OMAPDSS: RFBI: Use dss_mgr_enable to enable the overlay manager
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
The RFBI driver uses a direct DISPC register write to enable the overlay
manager. Replace this with dss_mgr_enable() which checks if the connected
overlay and managers are correctly configured, and configure DSS for
fifomerge.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/rfbi.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 0376056..8c5d5df 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -300,10 +300,11 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
}
EXPORT_SYMBOL(omap_rfbi_write_pixels);
-static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
+static int rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
u16 height, void (*callback)(void *data), void *data)
{
u32 l;
+ int r;
struct omap_video_timings timings = {
.hsw = 1,
.hfp = 1,
@@ -322,7 +323,9 @@ static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
dss_mgr_set_timings(dssdev->manager, &timings);
- dispc_mgr_enable(dssdev->manager->id, true);
+ r = dss_mgr_enable(dssdev->manager);
+ if (r)
+ return r;
rfbi.framedone_callback = callback;
rfbi.framedone_callback_data = data;
@@ -335,6 +338,8 @@ static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
l = FLD_MOD(l, 1, 4, 4); /* ITE */
rfbi_write_reg(RFBI_CONTROL, l);
+
+ return 0;
}
static void framedone_callback(void *data, u32 mask)
@@ -814,8 +819,11 @@ int omap_rfbi_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h,
void (*callback)(void *), void *data)
{
- rfbi_transfer_area(dssdev, w, h, callback, data);
- return 0;
+ int r;
+
+ r = rfbi_transfer_area(dssdev, w, h, callback, data);
+
+ return r;
}
EXPORT_SYMBOL(omap_rfbi_update);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 12/12] OMAPDSS: OVERLAY: Clean up replication checking
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-28 14:42 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:30 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Replication logic for an overlay depends on the color mode in which it is
configured and the video port width of the manager it is connected to.
video port width now held in dss_lcd_mgr_config in the manager's private
data in APPLY. Use this instead of referring to the omap_dss_device connected to
the manager.
Replication is enabled in the case of TV manager, the video_port_width is set to
a default value of 24 for TV manager.
Make the replication checking an overlay function since it's more of an overlay
characteristic than a display characteristic.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/apply.c | 2 +-
drivers/video/omap2/dss/display.c | 34 ----------------------------------
drivers/video/omap2/dss/dss.h | 4 ++--
drivers/video/omap2/dss/overlay.c | 13 +++++++++++++
4 files changed, 16 insertions(+), 37 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index b9c6e75..89ee677 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -571,7 +571,7 @@ static void dss_ovl_write_regs(struct omap_overlay *ovl)
mp = get_mgr_priv(ovl->manager);
- replication = dss_use_replication(ovl->manager->device, oi->color_mode);
+ replication = dss_ovl_use_replication(mp->lcd_config, oi->color_mode);
r = dispc_ovl_setup(ovl->id, oi, replication, &mp->timings);
if (r) {
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 1d8198e..9433b92 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -316,40 +316,6 @@ void omapdss_default_get_timings(struct omap_dss_device *dssdev,
}
EXPORT_SYMBOL(omapdss_default_get_timings);
-/* Checks if replication logic should be used. Only use for active matrix,
- * when overlay is in RGB12U or RGB16 mode, and LCD interface is
- * 18bpp or 24bpp */
-bool dss_use_replication(struct omap_dss_device *dssdev,
- enum omap_color_mode mode)
-{
- int bpp;
-
- if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16)
- return false;
-
- switch (dssdev->type) {
- case OMAP_DISPLAY_TYPE_DPI:
- bpp = dssdev->phy.dpi.data_lines;
- break;
- case OMAP_DISPLAY_TYPE_HDMI:
- case OMAP_DISPLAY_TYPE_VENC:
- case OMAP_DISPLAY_TYPE_SDI:
- bpp = 24;
- break;
- case OMAP_DISPLAY_TYPE_DBI:
- bpp = dssdev->ctrl.pixel_size;
- break;
- case OMAP_DISPLAY_TYPE_DSI:
- bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
- break;
- default:
- BUG();
- return false;
- }
-
- return bpp > 16;
-}
-
void dss_init_device(struct platform_device *pdev,
struct omap_dss_device *dssdev)
{
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index cb859e3..018b27c 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -222,8 +222,6 @@ void dss_init_device(struct platform_device *pdev,
struct omap_dss_device *dssdev);
void dss_uninit_device(struct platform_device *pdev,
struct omap_dss_device *dssdev);
-bool dss_use_replication(struct omap_dss_device *dssdev,
- enum omap_color_mode mode);
/* manager */
int dss_init_overlay_managers(struct platform_device *pdev);
@@ -255,6 +253,8 @@ int dss_ovl_simple_check(struct omap_overlay *ovl,
const struct omap_overlay_info *info);
int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
const struct omap_video_timings *mgr_timings);
+bool dss_ovl_use_replication(struct dss_lcd_mgr_config config,
+ enum omap_color_mode mode);
/* DSS */
int dss_init_platform_driver(void) __init;
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index c492bb0..0a129dc 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -677,3 +677,16 @@ int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
return 0;
}
+
+/*
+ * Checks if replication logic should be used. Only use when overlay is in
+ * RGB12U or RGB16 mode, and video port width interface is 18bpp or 24bpp
+ */
+bool dss_ovl_use_replication(struct dss_lcd_mgr_config config,
+ enum omap_color_mode mode)
+{
+ if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16)
+ return false;
+
+ return config.video_port_width > 16;
+}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 00/12] OMAPDSS: Apply LCD manager related parameters
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
The LCD interface drivers(DPI, DSI, RFBI, SDI) do some direct DISPC register
writes to configure LCD manager related fields. This series groups these fields
into a single struct, and let's the interface driver apply these parameters.
This allows us to:
- Check the LCD manager related parameters before applying them.
- Remove some omap_dss_device references as APPLY holds the applied parameters.
Pushed onto the branch:
git://gitorious.org/~boddob/linux-omap-dss2/archit-dss2-clone.git apply_lcd_mgr_params
Tested on 3430SDP, 4430SDP ans Pandaboard ES.
Archit Taneja (12):
OMAPDSS: DISPC: Change return type of dispc_mgr_set_clock_div()
OMAPDSS: Add struct to hold LCD overlay manager configuration
OMAPDSS: DPI: Configure dss_lcd_mgr_config struct with lcd manager
parameters
OMAPDSS: RFBI: Configure dss_lcd_mgr_config struct with lcd manager
parameters
OMAPDSS: DSI: Configure dss_lcd_mgr_config struct with lcd manager
parameters
OMAPDSS: SDI: Configure dss_lcd_mgr_config struct with lcd manager
parameters
OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in
interface drivers
OMAPDSS: MANAGER: Check LCD related overlay manager parameters
OMAPDSS: APPLY: Remove usage of omap_dss_device from manual/auto
update checks
OMAPDSS: DISPC: Remove a redundant function
OMAPDSS: RFBI: Use dss_mgr_enable to enable the overlay manager
OMAPDSS: OVERLAY: Clean up replication checking
drivers/video/omap2/dss/apply.c | 82 ++++++++++++++++++++++++++--
drivers/video/omap2/dss/dispc.c | 31 ++++-------
drivers/video/omap2/dss/display.c | 34 ------------
drivers/video/omap2/dss/dpi.c | 31 ++++++-----
drivers/video/omap2/dss/dsi.c | 108 ++++++++++++++++++++++---------------
drivers/video/omap2/dss/dss.h | 30 +++++++++--
drivers/video/omap2/dss/manager.c | 35 ++++++++++++
drivers/video/omap2/dss/overlay.c | 13 +++++
drivers/video/omap2/dss/rfbi.c | 39 ++++++++++----
drivers/video/omap2/dss/sdi.c | 32 +++++------
10 files changed, 286 insertions(+), 149 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 01/12] MAPDSS: DISPC: Change return type of dispc_mgr_set_clock_div()
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
dipsc_mgr_set_clock div has an int return type to report errors or success.
The function doesn't really check for errors and always returns 0. Change
the return type to void.
Checking for the correct DISPC clock divider ranges will be done when a DSS2
user does a manager apply. This support will be added later.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dispc.c | 4 +---
drivers/video/omap2/dss/dpi.c | 10 ++--------
drivers/video/omap2/dss/dsi.c | 6 +-----
drivers/video/omap2/dss/dss.h | 2 +-
drivers/video/omap2/dss/sdi.c | 5 +----
5 files changed, 6 insertions(+), 21 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 864adcc..b047fe6 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3184,15 +3184,13 @@ int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
return 0;
}
-int dispc_mgr_set_clock_div(enum omap_channel channel,
+void dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo)
{
DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div);
DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div);
dispc_mgr_set_lcd_divisor(channel, cinfo->lck_div, cinfo->pck_div);
-
- return 0;
}
int dispc_mgr_get_clock_div(enum omap_channel channel,
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 046a6fb..af01430 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -100,11 +100,7 @@ static int dpi_set_dsi_clk(struct omap_dss_device *dssdev,
dss_select_dispc_clk_source(clks->dispc.fclk_src);
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r) {
- dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
- return r;
- }
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
*fck = dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
*lck_div = dispc_cinfo.lck_div;
@@ -129,9 +125,7 @@ static int dpi_set_dispc_clk(struct omap_dss_device *dssdev,
if (r)
return r;
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
- return r;
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
*fck = dss_cinfo.fck;
*lck_div = dispc_cinfo.lck_div;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 9f08787..94ff3aa 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4456,11 +4456,7 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev,
return r;
}
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r) {
- DSSERR("Failed to set dispc clocks\n");
- return r;
- }
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
return 0;
}
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 20151d5..f8289e9 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -416,7 +416,7 @@ void dispc_mgr_set_timings(enum omap_channel channel,
unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
unsigned long dispc_core_clk_rate(void);
-int dispc_mgr_set_clock_div(enum omap_channel channel,
+void dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
int dispc_mgr_get_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index b44ab72..0b2659f 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -106,9 +106,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_set_dss_clock_div;
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
- goto err_set_dispc_clock_div;
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
@@ -125,7 +123,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
err_mgr_enable:
dss_sdi_disable();
err_sdi_enable:
-err_set_dispc_clock_div:
err_set_dss_clock_div:
err_calc_clock_div:
dispc_runtime_put();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 01/12] OMAPDSS: DISPC: Change return type of dispc_mgr_set_clock_div()
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
dipsc_mgr_set_clock div has an int return type to report errors or success.
The function doesn't really check for errors and always returns 0. Change
the return type to void.
Checking for the correct DISPC clock divider ranges will be done when a DSS2
user does a manager apply. This support will be added later.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dispc.c | 4 +---
drivers/video/omap2/dss/dpi.c | 10 ++--------
drivers/video/omap2/dss/dsi.c | 6 +-----
drivers/video/omap2/dss/dss.h | 2 +-
drivers/video/omap2/dss/sdi.c | 5 +----
5 files changed, 6 insertions(+), 21 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 864adcc..b047fe6 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3184,15 +3184,13 @@ int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
return 0;
}
-int dispc_mgr_set_clock_div(enum omap_channel channel,
+void dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo)
{
DSSDBG("lck = %lu (%u)\n", cinfo->lck, cinfo->lck_div);
DSSDBG("pck = %lu (%u)\n", cinfo->pck, cinfo->pck_div);
dispc_mgr_set_lcd_divisor(channel, cinfo->lck_div, cinfo->pck_div);
-
- return 0;
}
int dispc_mgr_get_clock_div(enum omap_channel channel,
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 046a6fb..af01430 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -100,11 +100,7 @@ static int dpi_set_dsi_clk(struct omap_dss_device *dssdev,
dss_select_dispc_clk_source(clks->dispc.fclk_src);
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r) {
- dss_select_dispc_clk_source(OMAP_DSS_CLK_SRC_FCK);
- return r;
- }
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
*fck = dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
*lck_div = dispc_cinfo.lck_div;
@@ -129,9 +125,7 @@ static int dpi_set_dispc_clk(struct omap_dss_device *dssdev,
if (r)
return r;
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
- return r;
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
*fck = dss_cinfo.fck;
*lck_div = dispc_cinfo.lck_div;
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 9f08787..94ff3aa 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4456,11 +4456,7 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev,
return r;
}
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r) {
- DSSERR("Failed to set dispc clocks\n");
- return r;
- }
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
return 0;
}
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 20151d5..f8289e9 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -416,7 +416,7 @@ void dispc_mgr_set_timings(enum omap_channel channel,
unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
unsigned long dispc_core_clk_rate(void);
-int dispc_mgr_set_clock_div(enum omap_channel channel,
+void dispc_mgr_set_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
int dispc_mgr_get_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index b44ab72..0b2659f 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -106,9 +106,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_set_dss_clock_div;
- r = dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
- if (r)
- goto err_set_dispc_clock_div;
+ dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
@@ -125,7 +123,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
err_mgr_enable:
dss_sdi_disable();
err_sdi_enable:
-err_set_dispc_clock_div:
err_set_dss_clock_div:
err_calc_clock_div:
dispc_runtime_put();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 02/12] OMAPDSS: Add struct to hold LCD overlay manager configuration
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a struct dss_lcd_mgr_config which holds LCD overlay manager related
parameters. These are currently partially contained in the omap_dss_device
connected to the manager, and the rest are in the interface driver.
The parameters are directly written to the DISPC registers in the interface
drivers. These should eventually be applied at the correct time using the
shadow register programming model. This struct would help in grouping these
parameters so that they can be applied together.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dss.h | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index f8289e9..6688eaf 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -152,6 +152,19 @@ struct dsi_clock_info {
u16 lp_clk_div;
};
+struct dss_lcd_mgr_config {
+ enum dss_io_pad_mode io_pad_mode;
+
+ bool stallmode;
+ bool fifohandcheck;
+
+ struct dispc_clock_info clock_info;
+
+ int video_port_width;
+
+ int lcden_sig_polarity;
+};
+
struct seq_file;
struct platform_device;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 03/12] OMAPDSS: DPI: Configure dss_lcd_mgr_config struct with lcd manager parameters
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a dss_lcd_mgr_config struct instance in DPI. Fill up all the parameters
of the struct with configurations held by the panel, and the configurations
required by DPI.
Use these to write to the DISPC registers. These direct register writes would be
later replaced by a function which applies the configuration using the shadow
register programming model.
The DISPC_DIVISORo registers were written in the functions dpi_set_dispc_clk()
and dpi_set_dsi_clk(), now they just fill up the dispc_clock_info parameter in
mgr_config. They are written later in dpi_config_lcd_manager.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dpi.c | 37 ++++++++++++++++++++++++++++---------
1 file changed, 28 insertions(+), 9 deletions(-)
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index af01430..a3a012b 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -38,6 +38,8 @@
static struct {
struct regulator *vdds_dsi_reg;
struct platform_device *dsidev;
+
+ struct dss_lcd_mgr_config mgr_config;
} dpi;
static struct platform_device *dpi_get_dsidev(enum omap_dss_clk_source clk)
@@ -100,7 +102,7 @@ static int dpi_set_dsi_clk(struct omap_dss_device *dssdev,
dss_select_dispc_clk_source(clks->dispc.fclk_src);
- dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ dpi.mgr_config.clock_info = dispc_cinfo;
*fck = dsi_cinfo.dsi_pll_hsdiv_dispc_clk;
*lck_div = dispc_cinfo.lck_div;
@@ -125,7 +127,7 @@ static int dpi_set_dispc_clk(struct omap_dss_device *dssdev,
if (r)
return r;
- dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ dpi.mgr_config.clock_info = dispc_cinfo;
*fck = dss_cinfo.fck;
*lck_div = dispc_cinfo.lck_div;
@@ -166,15 +168,32 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
return 0;
}
-static void dpi_basic_init(struct omap_dss_device *dssdev)
+static void dpi_config_lcd_manager(struct omap_dss_device *dssdev)
{
- dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_BYPASS);
- dispc_mgr_enable_stallmode(dssdev->manager->id, false);
+ dpi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dpi.mgr_config.stallmode = false;
+ dpi.mgr_config.fifohandcheck = false;
+
+ dpi.mgr_config.video_port_width = dssdev->phy.dpi.data_lines;
+
+ dpi.mgr_config.lcden_sig_polarity = false;
+
+ dispc_mgr_set_io_pad_mode(dpi.mgr_config.io_pad_mode);
+ dispc_mgr_enable_stallmode(dssdev->manager->id,
+ dpi.mgr_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
+ dpi.mgr_config.fifohandcheck);
dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- dssdev->phy.dpi.data_lines);
+ dpi.mgr_config.video_port_width);
+
+ dispc_mgr_set_clock_div(dssdev->manager->id,
+ &dpi.mgr_config.clock_info);
+
+ dispc_lcd_enable_signal_polarity(dpi.mgr_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
}
int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
@@ -213,8 +232,6 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_get_dispc;
- dpi_basic_init(dssdev);
-
if (dpi_use_dsi_pll(dssdev)) {
r = dsi_runtime_get(dpi.dsidev);
if (r)
@@ -229,6 +246,8 @@ int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_set_mode;
+ dpi_config_lcd_manager(dssdev);
+
mdelay(2);
r = dss_mgr_enable(dssdev->manager);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 04/12] OMAPDSS: RFBI: Configure dss_lcd_mgr_config struct with lcd manager parameters
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a dss_lcd_mgr_config struct instance in RFBI. Fill up all the parameters
of the struct with configurations held by the panel, and the configurations
required by RFBI.
Use these to write to the DISPC registers. These direct register writes would be
later replaced by a function which applies the configuration using the shadow
register programming model.
Create function rfbi_config_lcd_manager() which fills up the mgr_config
parameters and writes to the DISPC regs.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/rfbi.c | 34 ++++++++++++++++++++++++++++------
1 file changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 45084d8..847f694 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -859,6 +859,33 @@ static void rfbi_dump_regs(struct seq_file *s)
#undef DUMPREG
}
+static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
+{
+ struct dss_lcd_mgr_config mgr_config;
+
+ mgr_config.io_pad_mode = DSS_IO_PAD_MODE_RFBI;
+
+ mgr_config.stallmode = true;
+ /* Do we need fifohandcheck for RFBI? */
+ mgr_config.fifohandcheck = false;
+
+ mgr_config.video_port_width = dssdev->ctrl.pixel_size;
+ mgr_config.lcden_sig_polarity = 0;
+
+ dispc_mgr_set_io_pad_mode(mgr_config.io_pad_mode);
+
+ dispc_mgr_enable_stallmode(dssdev->manager->id, mgr_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
+ mgr_config.fifohandcheck);
+
+ dispc_mgr_set_tft_data_lines(dssdev->manager->id,
+ mgr_config.video_port_width);
+
+ dispc_lcd_enable_signal_polarity(mgr_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+}
+
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
{
int r;
@@ -885,12 +912,7 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
goto err1;
}
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
-
- dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_RFBI);
- dispc_mgr_enable_stallmode(dssdev->manager->id, true);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id, dssdev->ctrl.pixel_size);
+ rfbi_config_lcd_manager(dssdev);
rfbi_configure(dssdev->phy.rfbi.channel,
dssdev->ctrl.pixel_size,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 05/12] OMAPDSS: DSI: Configure dss_lcd_mgr_config struct with lcd manager parameters
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a dss_lcd_mgr_config struct instance in DSI. Fill up all the parameters
of the struct with configurations held by the panel, and the configurations
required by DSI.
Use these to write to the DISPC registers. These direct register writes would be
later replaced by a function which applies the configuration using the shadow
register programming model.
The function dsi_configure_dispc_clocks() is now called in
dsi_display_init_dispc(), this lets all the lcd manager related configurations
happen in the same place. The DISPC_DIVISORo register was written in
dsi_configure_dispc_clock(), now it just fills up the dispc_clock_info parameter
in mgr_config. The clock_info is written later in dsi_display_init_dispc().
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dsi.c | 117 ++++++++++++++++++++++++++++-------------
1 file changed, 80 insertions(+), 37 deletions(-)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 94ff3aa..df92e24 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -331,6 +331,8 @@ struct dsi_data {
unsigned num_lanes_used;
unsigned scp_clk_refcount;
+
+ struct dss_lcd_mgr_config mgr_config;
};
struct dsi_packet_sent_handler_data {
@@ -4339,14 +4341,42 @@ EXPORT_SYMBOL(omap_dsi_update);
/* Display funcs */
-static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
+static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev,
+ const struct omapdss_lcd_clock_config *lcd_clks)
{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ struct dispc_clock_info dispc_cinfo;
int r;
+ unsigned long long fck;
+
+ fck = dsi_get_pll_hsdiv_dispc_rate(dsidev);
+
+ dispc_cinfo.lck_div = lcd_clks->lck_div;
+ dispc_cinfo.pck_div = lcd_clks->pck_div;
+
+ r = dispc_calc_clock_rates(fck, &dispc_cinfo);
+ if (r) {
+ DSSERR("Failed to calc dispc clocks\n");
+ return r;
+ }
+
+ dsi->mgr_config.clock_info = dispc_cinfo;
+
+ return 0;
+}
+
+static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
+{
+ struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
+ struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct omap_video_timings timings;
+ const struct omapdss_clock_config *clks;
+ int r, lcd_id;
+ u32 irq;
if (dssdev->panel.dsi_mode = OMAP_DSS_DSI_CMD_MODE) {
u16 dw, dh;
- u32 irq;
dssdev->driver->get_resolution(dssdev, &dw, &dh);
@@ -4366,16 +4396,16 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
(void *) dssdev, irq);
if (r) {
DSSERR("can't get FRAMEDONE irq\n");
- return r;
+ goto err;
}
- dispc_mgr_enable_stallmode(dssdev->manager->id, true);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 1);
+ dsi->mgr_config.stallmode = true;
+ dsi->mgr_config.fifohandcheck = true;
} else {
timings = dssdev->panel.timings;
- dispc_mgr_enable_stallmode(dssdev->manager->id, false);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id, 0);
+ dsi->mgr_config.stallmode = false;
+ dsi->mgr_config.fifohandcheck = false;
}
/*
@@ -4391,12 +4421,53 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
dss_mgr_set_timings(dssdev->manager, &timings);
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ clks = dss_get_platform_clock_config();
+
+ switch (dssdev->manager->id) {
+ case OMAP_DSS_CHANNEL_LCD:
+ lcd_id = 0;
+ break;
+ case OMAP_DSS_CHANNEL_LCD2:
+ lcd_id = 1;
+ break;
+ default:
+ r = -EINVAL;
+ goto err1;
+ }
+
+ r = dsi_configure_dispc_clocks(dssdev, &clks->lcd[lcd_id]);
+ if (r)
+ goto err1;
+
+ dsi->mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
+ dsi->mgr_config.video_port_width + dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
+ dsi->mgr_config.lcden_sig_polarity = 0;
+
+ dispc_mgr_set_io_pad_mode(dsi->mgr_config.io_pad_mode);
+
+ dispc_mgr_enable_stallmode(dssdev->manager->id,
+ dsi->mgr_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
+ dsi->mgr_config.fifohandcheck);
+
+ dispc_mgr_set_clock_div(dssdev->manager->id,
+ &dsi->mgr_config.clock_info);
dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt));
+ dsi->mgr_config.video_port_width);
+
+ dispc_lcd_enable_signal_polarity(dsi->mgr_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
return 0;
+err1:
+ if (dssdev->panel.dsi_mode = OMAP_DSS_DSI_CMD_MODE)
+ omap_dispc_unregister_isr(dsi_framedone_irq_callback,
+ (void *) dssdev, irq);
+err:
+ return r;
}
static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev)
@@ -4437,30 +4508,6 @@ static int dsi_configure_dsi_clocks(struct platform_device *dsidev,
return 0;
}
-static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev,
- const struct omapdss_lcd_clock_config *lcd_clks)
-{
- struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
- struct dispc_clock_info dispc_cinfo;
- int r;
- unsigned long long fck;
-
- fck = dsi_get_pll_hsdiv_dispc_rate(dsidev);
-
- dispc_cinfo.lck_div = lcd_clks->lck_div;
- dispc_cinfo.pck_div = lcd_clks->pck_div;
-
- r = dispc_calc_clock_rates(fck, &dispc_cinfo);
- if (r) {
- DSSERR("Failed to calc dispc clocks\n");
- return r;
- }
-
- dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
-
- return 0;
-}
-
static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@@ -4499,10 +4546,6 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
DSSDBG("PLL OK\n");
- r = dsi_configure_dispc_clocks(dssdev, &clks->lcd[lcd_id]);
- if (r)
- goto err2;
-
r = dsi_cio_init(dssdev);
if (r)
goto err2;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 06/12] OMAPDSS: SDI: Configure dss_lcd_mgr_config struct with lcd manager parameters
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Create a dss_lcd_mgr_config struct instance in SDI. Fill up all the parameters
of the struct with configurations held by the panel, and the configurations
required by SDI.
Use these to write to the DISPC registers. These direct register writes would be
later replaced by a function which applies the configuration using the shadow
register programming model.
Create function sdi_config_lcd_manager() which fills the mgr_config parameters
and writes to the DISPC registers
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/sdi.c | 42 +++++++++++++++++++++++++----------------
1 file changed, 26 insertions(+), 16 deletions(-)
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 0b2659f..f6cd96c 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -32,18 +32,34 @@
static struct {
bool update_enabled;
struct regulator *vdds_sdi_reg;
-} sdi;
-static void sdi_basic_init(struct omap_dss_device *dssdev)
+ struct dss_lcd_mgr_config mgr_config;
+} sdi;
+static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
{
- dispc_mgr_set_io_pad_mode(DSS_IO_PAD_MODE_BYPASS);
- dispc_mgr_enable_stallmode(dssdev->manager->id, false);
+ sdi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ sdi.mgr_config.stallmode = false;
+ sdi.mgr_config.fifohandcheck = false;
+
+ sdi.mgr_config.video_port_width = 24;
+ sdi.mgr_config.lcden_sig_polarity = 1;
+
+ dispc_mgr_set_io_pad_mode(sdi.mgr_config.io_pad_mode);
+ dispc_mgr_enable_stallmode(dssdev->manager->id,
+ sdi.mgr_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
+ sdi.mgr_config.fifohandcheck);
- dispc_mgr_set_tft_data_lines(dssdev->manager->id, 24);
- dispc_lcd_enable_signal_polarity(1);
+ dispc_mgr_set_clock_div(dssdev->manager->id,
+ &sdi.mgr_config.clock_info);
+
+ dispc_mgr_set_tft_data_lines(dssdev->manager->id,
+ sdi.mgr_config.video_port_width);
+ dispc_lcd_enable_signal_polarity(sdi.mgr_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
}
int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
@@ -51,8 +67,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
struct omap_video_timings *t = &dssdev->panel.timings;
struct dss_clock_info dss_cinfo;
struct dispc_clock_info dispc_cinfo;
- u16 lck_div, pck_div;
- unsigned long fck;
unsigned long pck;
int r;
@@ -75,8 +89,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_get_dispc;
- sdi_basic_init(dssdev);
-
/* 15.5.9.1.2 */
dssdev->panel.timings.pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
dssdev->panel.timings.hsync_vsync_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
@@ -85,11 +97,9 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_calc_clock_div;
- fck = dss_cinfo.fck;
- lck_div = dispc_cinfo.lck_div;
- pck_div = dispc_cinfo.pck_div;
+ sdi.mgr_config.clock_info = dispc_cinfo;
- pck = fck / lck_div / pck_div / 1000;
+ pck = dss_cinfo.fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div / 1000;
if (pck != t->pixel_clock) {
DSSWARN("Could not find exact pixel clock. Requested %d kHz, "
@@ -106,7 +116,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err_set_dss_clock_div;
- dispc_mgr_set_clock_div(dssdev->manager->id, &dispc_cinfo);
+ sdi_config_lcd_manager(dssdev);
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drivers
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Replace the DISPC fuctions used to configure LCD channel related manager
parameters with dss_mgr_set_lcd_config() in APPLY. This function ensures that
the DISPC registers are written at the right time by using the shadow register
programming model.
The LCD manager configurations is stored as a private data of manager in APPLY.
It is treated as an extra info as it's the panel drivers which trigger this
apply via interface drivers, and not a DSS2 user like omapfb or omapdrm.
Storing LCD manager related properties in APPLY also prevents the need to refer
to the panel connected to the manager for information. This helps in making the
DSS driver less dependent on panel.
A helper function is added to check whether the manager is LCD or TV. The direct
DISPC register writes are removed from the interface drivers.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/apply.c | 65 +++++++++++++++++++++++++++++++++++++++
drivers/video/omap2/dss/dpi.c | 16 +---------
drivers/video/omap2/dss/dsi.c | 17 +---------
drivers/video/omap2/dss/dss.h | 10 ++++++
drivers/video/omap2/dss/rfbi.c | 13 +-------
drivers/video/omap2/dss/sdi.c | 15 +--------
6 files changed, 79 insertions(+), 57 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 3ce7a3e..bb4ec63 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -104,6 +104,7 @@ struct mgr_priv_data {
bool shadow_extra_info_dirty;
struct omap_video_timings timings;
+ struct dss_lcd_mgr_config lcd_config;
};
static struct {
@@ -137,6 +138,7 @@ static struct mgr_priv_data *get_mgr_priv(struct omap_overlay_manager *mgr)
void dss_apply_init(void)
{
const int num_ovls = dss_feat_get_num_ovls();
+ struct mgr_priv_data *mp;
int i;
spin_lock_init(&data_lock);
@@ -168,6 +170,16 @@ void dss_apply_init(void)
op->user_info = op->info;
}
+
+ /*
+ * Initialize some of the lcd_config fields for TV manager, this lets
+ * us prevent checking if the manager is LCD or TV at some places
+ */
+ mp = &dss_data.mgr_priv_data_array[OMAP_DSS_CHANNEL_DIGIT];
+
+ mp->lcd_config.video_port_width = 24;
+ mp->lcd_config.clock_info.lck_div = 1;
+ mp->lcd_config.clock_info.pck_div = 1;
}
static bool ovl_manual_update(struct omap_overlay *ovl)
@@ -633,6 +645,24 @@ static void dss_mgr_write_regs_extra(struct omap_overlay_manager *mgr)
dispc_mgr_set_timings(mgr->id, &mp->timings);
+ /* lcd_config parameters */
+ if (dss_mgr_is_lcd(mgr->id)) {
+ dispc_mgr_set_io_pad_mode(mp->lcd_config.io_pad_mode);
+
+ dispc_mgr_enable_stallmode(mgr->id, mp->lcd_config.stallmode);
+ dispc_mgr_enable_fifohandcheck(mgr->id,
+ mp->lcd_config.fifohandcheck);
+
+ dispc_mgr_set_clock_div(mgr->id, &mp->lcd_config.clock_info);
+
+ dispc_mgr_set_tft_data_lines(mgr->id,
+ mp->lcd_config.video_port_width);
+
+ dispc_lcd_enable_signal_polarity(mp->lcd_config.lcden_sig_polarity);
+
+ dispc_mgr_set_lcd_type_tft(mgr->id);
+ }
+
mp->extra_info_dirty = false;
if (mp->updating)
mp->shadow_extra_info_dirty = true;
@@ -1292,6 +1322,41 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
mutex_unlock(&apply_lock);
}
+static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
+ struct dss_lcd_mgr_config config)
+{
+ struct mgr_priv_data *mp = get_mgr_priv(mgr);
+
+ mp->lcd_config = config;
+ mp->extra_info_dirty = true;
+}
+
+void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
+ struct dss_lcd_mgr_config config)
+{
+ unsigned long flags;
+ struct mgr_priv_data *mp = get_mgr_priv(mgr);
+
+ mutex_lock(&apply_lock);
+
+ if (mp->enabled)
+ goto out;
+
+ spin_lock_irqsave(&data_lock, flags);
+
+ dss_apply_mgr_lcd_config(mgr, config);
+
+ dss_write_regs();
+ dss_set_go_bits();
+
+ spin_unlock_irqrestore(&data_lock, flags);
+
+ wait_pending_extra_info_updates();
+
+out:
+ mutex_unlock(&apply_lock);
+}
+
int dss_ovl_set_info(struct omap_overlay *ovl,
struct omap_overlay_info *info)
{
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index a3a012b..c10c0f8 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -179,21 +179,7 @@ static void dpi_config_lcd_manager(struct omap_dss_device *dssdev)
dpi.mgr_config.lcden_sig_polarity = false;
- dispc_mgr_set_io_pad_mode(dpi.mgr_config.io_pad_mode);
- dispc_mgr_enable_stallmode(dssdev->manager->id,
- dpi.mgr_config.stallmode);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
- dpi.mgr_config.fifohandcheck);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- dpi.mgr_config.video_port_width);
-
- dispc_mgr_set_clock_div(dssdev->manager->id,
- &dpi.mgr_config.clock_info);
-
- dispc_lcd_enable_signal_polarity(dpi.mgr_config.lcden_sig_polarity);
-
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dss_mgr_set_lcd_config(dssdev->manager, dpi.mgr_config);
}
int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index df92e24..0ae85e2 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -4444,22 +4444,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
dsi->mgr_config.lcden_sig_polarity = 0;
- dispc_mgr_set_io_pad_mode(dsi->mgr_config.io_pad_mode);
-
- dispc_mgr_enable_stallmode(dssdev->manager->id,
- dsi->mgr_config.stallmode);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
- dsi->mgr_config.fifohandcheck);
-
- dispc_mgr_set_clock_div(dssdev->manager->id,
- &dsi->mgr_config.clock_info);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- dsi->mgr_config.video_port_width);
-
- dispc_lcd_enable_signal_polarity(dsi->mgr_config.lcden_sig_polarity);
-
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dss_mgr_set_lcd_config(dssdev->manager, dsi->mgr_config);
return 0;
err1:
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 6688eaf..b4c52ec 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -202,6 +202,8 @@ int dss_mgr_set_device(struct omap_overlay_manager *mgr,
int dss_mgr_unset_device(struct omap_overlay_manager *mgr);
void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
struct omap_video_timings *timings);
+void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
+ struct dss_lcd_mgr_config config);
const struct omap_video_timings *dss_mgr_get_timings(struct omap_overlay_manager *mgr);
bool dss_ovl_is_enabled(struct omap_overlay *ovl);
@@ -235,6 +237,14 @@ int dss_mgr_check(struct omap_overlay_manager *mgr,
const struct omap_video_timings *mgr_timings,
struct omap_overlay_info **overlay_infos);
+static inline bool dss_mgr_is_lcd(enum omap_channel id)
+{
+ if (id = OMAP_DSS_CHANNEL_LCD || id = OMAP_DSS_CHANNEL_LCD2)
+ return true;
+ else
+ return false;
+}
+
/* overlay */
void dss_init_overlays(struct platform_device *pdev);
void dss_uninit_overlays(struct platform_device *pdev);
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 847f694..0376056 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -872,18 +872,7 @@ static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
mgr_config.video_port_width = dssdev->ctrl.pixel_size;
mgr_config.lcden_sig_polarity = 0;
- dispc_mgr_set_io_pad_mode(mgr_config.io_pad_mode);
-
- dispc_mgr_enable_stallmode(dssdev->manager->id, mgr_config.stallmode);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
- mgr_config.fifohandcheck);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- mgr_config.video_port_width);
-
- dispc_lcd_enable_signal_polarity(mgr_config.lcden_sig_polarity);
-
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dss_mgr_set_lcd_config(dssdev->manager, mgr_config);
}
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index f6cd96c..b8dc13c 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -46,20 +46,7 @@ static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
sdi.mgr_config.video_port_width = 24;
sdi.mgr_config.lcden_sig_polarity = 1;
- dispc_mgr_set_io_pad_mode(sdi.mgr_config.io_pad_mode);
- dispc_mgr_enable_stallmode(dssdev->manager->id,
- sdi.mgr_config.stallmode);
- dispc_mgr_enable_fifohandcheck(dssdev->manager->id,
- sdi.mgr_config.fifohandcheck);
-
- dispc_mgr_set_clock_div(dssdev->manager->id,
- &sdi.mgr_config.clock_info);
-
- dispc_mgr_set_tft_data_lines(dssdev->manager->id,
- sdi.mgr_config.video_port_width);
- dispc_lcd_enable_signal_polarity(sdi.mgr_config.lcden_sig_polarity);
-
- dispc_mgr_set_lcd_type_tft(dssdev->manager->id);
+ dss_mgr_set_lcd_config(dssdev->manager, sdi.mgr_config);
}
int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 08/12] OMAPDSS: MANAGER: Check LCD related overlay manager parameters
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
The LCD related manager configurations are a part of the manager's private data
in APPLY. Pass this to dss_lcd_mgr_config to dss_mgr_check and create a function
to check the validity of some of the configurations.
To check some of the configurations, we require information of interface to
which the manager output is connected. These can be added once interfaces are
represented as an entity.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/apply.c | 2 +-
drivers/video/omap2/dss/dss.h | 1 +
drivers/video/omap2/dss/manager.c | 35 +++++++++++++++++++++++++++++++++++
3 files changed, 37 insertions(+), 1 deletion(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index bb4ec63..95a6713 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -226,7 +226,7 @@ static int dss_check_settings_low(struct omap_overlay_manager *mgr,
ois[ovl->id] = oi;
}
- return dss_mgr_check(mgr, mi, &mp->timings, ois);
+ return dss_mgr_check(mgr, mi, &mp->timings, &mp->lcd_config, ois);
}
/*
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index b4c52ec..cb859e3 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -235,6 +235,7 @@ int dss_mgr_check_timings(struct omap_overlay_manager *mgr,
int dss_mgr_check(struct omap_overlay_manager *mgr,
struct omap_overlay_manager_info *info,
const struct omap_video_timings *mgr_timings,
+ const struct dss_lcd_mgr_config *config,
struct omap_overlay_info **overlay_infos);
static inline bool dss_mgr_is_lcd(enum omap_channel id)
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 0cbcde4..09540bc 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -665,9 +665,40 @@ int dss_mgr_check_timings(struct omap_overlay_manager *mgr,
return 0;
}
+static int dss_mgr_check_lcd_config(struct omap_overlay_manager *mgr,
+ const struct dss_lcd_mgr_config *config)
+{
+ struct dispc_clock_info cinfo = config->clock_info;
+ int dl = config->video_port_width;
+ bool stallmode = config->stallmode;
+ bool fifohandcheck = config->fifohandcheck;
+
+ if (cinfo.lck_div < 1 || cinfo.lck_div > 255)
+ return -EINVAL;
+
+ if (cinfo.pck_div < 1 || cinfo.pck_div > 255)
+ return -EINVAL;
+
+ if (dl != 12 && dl != 16 && dl != 18 && dl != 24)
+ return -EINVAL;
+
+ /* fifohandcheck should be used only with stallmode */
+ if (stallmode = false && fifohandcheck = true)
+ return -EINVAL;
+
+ /*
+ * io pad mode can be only checked by using dssdev connected to the
+ * manager. Ignore checking these for now, add checks when manager
+ * is capable of holding information related to the connected interface
+ */
+
+ return 0;
+}
+
int dss_mgr_check(struct omap_overlay_manager *mgr,
struct omap_overlay_manager_info *info,
const struct omap_video_timings *mgr_timings,
+ const struct dss_lcd_mgr_config *lcd_config,
struct omap_overlay_info **overlay_infos)
{
struct omap_overlay *ovl;
@@ -683,6 +714,10 @@ int dss_mgr_check(struct omap_overlay_manager *mgr,
if (r)
return r;
+ r = dss_mgr_check_lcd_config(mgr, lcd_config);
+ if (r)
+ return r;
+
list_for_each_entry(ovl, &mgr->overlays, list) {
struct omap_overlay_info *oi;
int r;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 09/12] OMAPDSS: APPLY: Remove usage of omap_dss_device from manual/auto update checks
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
APPLY needs to know at certain places whether an overlay manager is in manual
or auto update mode. The caps of the connected omap_dss_device were used to
check that.
A LCD manager is in manual update if stallmode is enabled for that manager. TV
managers for now always auto update.
Return the value of stallmode parameter in the private data 'lcd_confg' in
mgr_manual_update() and ovl_manual_update(), for TV managers stallmode field
will be false by default.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/apply.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 95a6713..b9c6e75 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -182,14 +182,23 @@ void dss_apply_init(void)
mp->lcd_config.clock_info.pck_div = 1;
}
+/*
+ * A LCD manager's stallmode decides whether it is in manual or auto update. TV
+ * manager is always auto update, stallmode field for TV manager is false by
+ * default
+ */
static bool ovl_manual_update(struct omap_overlay *ovl)
{
- return ovl->manager->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+ struct mgr_priv_data *mp = get_mgr_priv(ovl->manager);
+
+ return mp->lcd_config.stallmode;
}
static bool mgr_manual_update(struct omap_overlay_manager *mgr)
{
- return mgr->device->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
+ struct mgr_priv_data *mp = get_mgr_priv(mgr);
+
+ return mp->lcd_config.stallmode;
}
static int dss_check_settings_low(struct omap_overlay_manager *mgr,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 10/12] OMAPDSS: DISPC: Remove a redundant function
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
dss_mgr_is_lcd() available in dss.h does the same thing as dispc_mgr_is_lcd()
in dispc.c. Remove the function from dispc.c and replace it with the one in
dss.h.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/dispc.c | 27 +++++++++------------------
1 file changed, 9 insertions(+), 18 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index b047fe6..0e0b89c 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -387,15 +387,6 @@ void dispc_runtime_put(void)
WARN_ON(r < 0);
}
-static inline bool dispc_mgr_is_lcd(enum omap_channel channel)
-{
- if (channel = OMAP_DSS_CHANNEL_LCD ||
- channel = OMAP_DSS_CHANNEL_LCD2)
- return true;
- else
- return false;
-}
-
u32 dispc_mgr_get_vsync_irq(enum omap_channel channel)
{
switch (channel) {
@@ -430,7 +421,7 @@ bool dispc_mgr_go_busy(enum omap_channel channel)
{
int bit;
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
bit = 5; /* GOLCD */
else
bit = 6; /* GODIGIT */
@@ -446,7 +437,7 @@ void dispc_mgr_go(enum omap_channel channel)
int bit;
bool enable_bit, go_bit;
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
bit = 0; /* LCDENABLE */
else
bit = 1; /* DIGITALENABLE */
@@ -460,7 +451,7 @@ void dispc_mgr_go(enum omap_channel channel)
if (!enable_bit)
return;
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
bit = 5; /* GOLCD */
else
bit = 6; /* GODIGIT */
@@ -939,7 +930,7 @@ static void dispc_mgr_set_cpr_coef(enum omap_channel channel,
{
u32 coef_r, coef_g, coef_b;
- if (!dispc_mgr_is_lcd(channel))
+ if (!dss_mgr_is_lcd(channel))
return;
coef_r = FLD_VAL(coefs->rr, 31, 22) | FLD_VAL(coefs->rg, 20, 11) |
@@ -1798,7 +1789,7 @@ static int check_horiz_timing_omap3(enum omap_channel channel,
nonactive = t->x_res + t->hfp + t->hsw + t->hbp - out_width;
pclk = dispc_mgr_pclk_rate(channel);
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
lclk = dispc_mgr_lclk_rate(channel);
else
lclk = dispc_fclk_rate();
@@ -2398,7 +2389,7 @@ bool dispc_mgr_is_enabled(enum omap_channel channel)
void dispc_mgr_enable(enum omap_channel channel, bool enable)
{
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
dispc_mgr_enable_lcd_out(channel, enable);
else if (channel = OMAP_DSS_CHANNEL_DIGIT)
dispc_mgr_enable_digit_out(enable);
@@ -2610,7 +2601,7 @@ bool dispc_mgr_timings_ok(enum omap_channel channel,
timings_ok = _dispc_mgr_size_ok(timings->x_res, timings->y_res);
- if (dispc_mgr_is_lcd(channel))
+ if (dss_mgr_is_lcd(channel))
timings_ok = timings_ok && _dispc_lcd_timings_ok(timings->hsw,
timings->hfp, timings->hbp,
timings->vsw, timings->vfp,
@@ -2702,7 +2693,7 @@ void dispc_mgr_set_timings(enum omap_channel channel,
return;
}
- if (dispc_mgr_is_lcd(channel)) {
+ if (dss_mgr_is_lcd(channel)) {
_dispc_mgr_set_lcd_timings(channel, t.hsw, t.hfp, t.hbp, t.vsw,
t.vfp, t.vbp, t.vsync_level, t.hsync_level,
t.pclk_edge, t.de_level, t.hsync_vsync_edge);
@@ -2808,7 +2799,7 @@ unsigned long dispc_mgr_pclk_rate(enum omap_channel channel)
{
unsigned long r;
- if (dispc_mgr_is_lcd(channel)) {
+ if (dss_mgr_is_lcd(channel)) {
int pcd;
u32 l;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 11/12] OMAPDSS: RFBI: Use dss_mgr_enable to enable the overlay manager
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
The RFBI driver uses a direct DISPC register write to enable the overlay
manager. Replace this with dss_mgr_enable() which checks if the connected
overlay and managers are correctly configured, and configure DSS for
fifomerge.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/rfbi.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index 0376056..8c5d5df 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -300,10 +300,11 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
}
EXPORT_SYMBOL(omap_rfbi_write_pixels);
-static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
+static int rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
u16 height, void (*callback)(void *data), void *data)
{
u32 l;
+ int r;
struct omap_video_timings timings = {
.hsw = 1,
.hfp = 1,
@@ -322,7 +323,9 @@ static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
dss_mgr_set_timings(dssdev->manager, &timings);
- dispc_mgr_enable(dssdev->manager->id, true);
+ r = dss_mgr_enable(dssdev->manager);
+ if (r)
+ return r;
rfbi.framedone_callback = callback;
rfbi.framedone_callback_data = data;
@@ -335,6 +338,8 @@ static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
l = FLD_MOD(l, 1, 4, 4); /* ITE */
rfbi_write_reg(RFBI_CONTROL, l);
+
+ return 0;
}
static void framedone_callback(void *data, u32 mask)
@@ -814,8 +819,11 @@ int omap_rfbi_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h,
void (*callback)(void *), void *data)
{
- rfbi_transfer_area(dssdev, w, h, callback, data);
- return 0;
+ int r;
+
+ r = rfbi_transfer_area(dssdev, w, h, callback, data);
+
+ return r;
}
EXPORT_SYMBOL(omap_rfbi_update);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 12/12] OMAPDSS: OVERLAY: Clean up replication checking
@ 2012-06-28 14:42 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-28 14:42 UTC (permalink / raw)
To: tomi.valkeinen; +Cc: linux-fbdev, linux-omap, Archit Taneja
Replication logic for an overlay depends on the color mode in which it is
configured and the video port width of the manager it is connected to.
video port width now held in dss_lcd_mgr_config in the manager's private
data in APPLY. Use this instead of referring to the omap_dss_device connected to
the manager.
Replication is enabled in the case of TV manager, the video_port_width is set to
a default value of 24 for TV manager.
Make the replication checking an overlay function since it's more of an overlay
characteristic than a display characteristic.
Signed-off-by: Archit Taneja <archit@ti.com>
---
drivers/video/omap2/dss/apply.c | 2 +-
drivers/video/omap2/dss/display.c | 34 ----------------------------------
drivers/video/omap2/dss/dss.h | 4 ++--
drivers/video/omap2/dss/overlay.c | 13 +++++++++++++
4 files changed, 16 insertions(+), 37 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index b9c6e75..89ee677 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -571,7 +571,7 @@ static void dss_ovl_write_regs(struct omap_overlay *ovl)
mp = get_mgr_priv(ovl->manager);
- replication = dss_use_replication(ovl->manager->device, oi->color_mode);
+ replication = dss_ovl_use_replication(mp->lcd_config, oi->color_mode);
r = dispc_ovl_setup(ovl->id, oi, replication, &mp->timings);
if (r) {
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 1d8198e..9433b92 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -316,40 +316,6 @@ void omapdss_default_get_timings(struct omap_dss_device *dssdev,
}
EXPORT_SYMBOL(omapdss_default_get_timings);
-/* Checks if replication logic should be used. Only use for active matrix,
- * when overlay is in RGB12U or RGB16 mode, and LCD interface is
- * 18bpp or 24bpp */
-bool dss_use_replication(struct omap_dss_device *dssdev,
- enum omap_color_mode mode)
-{
- int bpp;
-
- if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16)
- return false;
-
- switch (dssdev->type) {
- case OMAP_DISPLAY_TYPE_DPI:
- bpp = dssdev->phy.dpi.data_lines;
- break;
- case OMAP_DISPLAY_TYPE_HDMI:
- case OMAP_DISPLAY_TYPE_VENC:
- case OMAP_DISPLAY_TYPE_SDI:
- bpp = 24;
- break;
- case OMAP_DISPLAY_TYPE_DBI:
- bpp = dssdev->ctrl.pixel_size;
- break;
- case OMAP_DISPLAY_TYPE_DSI:
- bpp = dsi_get_pixel_size(dssdev->panel.dsi_pix_fmt);
- break;
- default:
- BUG();
- return false;
- }
-
- return bpp > 16;
-}
-
void dss_init_device(struct platform_device *pdev,
struct omap_dss_device *dssdev)
{
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index cb859e3..018b27c 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -222,8 +222,6 @@ void dss_init_device(struct platform_device *pdev,
struct omap_dss_device *dssdev);
void dss_uninit_device(struct platform_device *pdev,
struct omap_dss_device *dssdev);
-bool dss_use_replication(struct omap_dss_device *dssdev,
- enum omap_color_mode mode);
/* manager */
int dss_init_overlay_managers(struct platform_device *pdev);
@@ -255,6 +253,8 @@ int dss_ovl_simple_check(struct omap_overlay *ovl,
const struct omap_overlay_info *info);
int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
const struct omap_video_timings *mgr_timings);
+bool dss_ovl_use_replication(struct dss_lcd_mgr_config config,
+ enum omap_color_mode mode);
/* DSS */
int dss_init_platform_driver(void) __init;
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index c492bb0..0a129dc 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -677,3 +677,16 @@ int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
return 0;
}
+
+/*
+ * Checks if replication logic should be used. Only use when overlay is in
+ * RGB12U or RGB16 mode, and video port width interface is 18bpp or 24bpp
+ */
+bool dss_ovl_use_replication(struct dss_lcd_mgr_config config,
+ enum omap_color_mode mode)
+{
+ if (mode != OMAP_DSS_COLOR_RGB12U && mode != OMAP_DSS_COLOR_RGB16)
+ return false;
+
+ return config.video_port_width > 16;
+}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 32+ messages in thread
* Re: [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drive
2012-06-28 14:42 ` Archit Taneja
@ 2012-06-29 10:12 ` Tomi Valkeinen
-1 siblings, 0 replies; 32+ messages in thread
From: Tomi Valkeinen @ 2012-06-29 10:12 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-fbdev, linux-omap
[-- Attachment #1: Type: text/plain, Size: 1701 bytes --]
On Thu, 2012-06-28 at 20:00 +0530, Archit Taneja wrote:
> Replace the DISPC fuctions used to configure LCD channel related manager
> parameters with dss_mgr_set_lcd_config() in APPLY. This function ensures that
> the DISPC registers are written at the right time by using the shadow register
> programming model.
>
> The LCD manager configurations is stored as a private data of manager in APPLY.
> It is treated as an extra info as it's the panel drivers which trigger this
> apply via interface drivers, and not a DSS2 user like omapfb or omapdrm.
>
> Storing LCD manager related properties in APPLY also prevents the need to refer
> to the panel connected to the manager for information. This helps in making the
> DSS driver less dependent on panel.
>
> A helper function is added to check whether the manager is LCD or TV. The direct
> DISPC register writes are removed from the interface drivers.
> +static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
> + struct dss_lcd_mgr_config config)
> +{
This one should take a pointer to the config, not a copy (and const).
> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
> +
> + mp->lcd_config = config;
> + mp->extra_info_dirty = true;
> +}
> +
> +void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
> + struct dss_lcd_mgr_config config)
And this.
> +{
> + unsigned long flags;
> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
> +
> + mutex_lock(&apply_lock);
> +
> + if (mp->enabled)
> + goto out;
Hmm. Should we print a warning or such here? Isn't it a bug in the
interface driver, if it tries to set the lcd config when the output is
enabled?
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drivers
@ 2012-06-29 10:12 ` Tomi Valkeinen
0 siblings, 0 replies; 32+ messages in thread
From: Tomi Valkeinen @ 2012-06-29 10:12 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-fbdev, linux-omap
[-- Attachment #1: Type: text/plain, Size: 1701 bytes --]
On Thu, 2012-06-28 at 20:00 +0530, Archit Taneja wrote:
> Replace the DISPC fuctions used to configure LCD channel related manager
> parameters with dss_mgr_set_lcd_config() in APPLY. This function ensures that
> the DISPC registers are written at the right time by using the shadow register
> programming model.
>
> The LCD manager configurations is stored as a private data of manager in APPLY.
> It is treated as an extra info as it's the panel drivers which trigger this
> apply via interface drivers, and not a DSS2 user like omapfb or omapdrm.
>
> Storing LCD manager related properties in APPLY also prevents the need to refer
> to the panel connected to the manager for information. This helps in making the
> DSS driver less dependent on panel.
>
> A helper function is added to check whether the manager is LCD or TV. The direct
> DISPC register writes are removed from the interface drivers.
> +static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
> + struct dss_lcd_mgr_config config)
> +{
This one should take a pointer to the config, not a copy (and const).
> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
> +
> + mp->lcd_config = config;
> + mp->extra_info_dirty = true;
> +}
> +
> +void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
> + struct dss_lcd_mgr_config config)
And this.
> +{
> + unsigned long flags;
> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
> +
> + mutex_lock(&apply_lock);
> +
> + if (mp->enabled)
> + goto out;
Hmm. Should we print a warning or such here? Isn't it a bug in the
interface driver, if it tries to set the lcd config when the output is
enabled?
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drivers
2012-06-29 10:12 ` [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drivers Tomi Valkeinen
@ 2012-06-29 10:40 ` Archit Taneja
-1 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-29 10:28 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-fbdev, linux-omap
On Friday 29 June 2012 03:42 PM, Tomi Valkeinen wrote:
> On Thu, 2012-06-28 at 20:00 +0530, Archit Taneja wrote:
>> Replace the DISPC fuctions used to configure LCD channel related manager
>> parameters with dss_mgr_set_lcd_config() in APPLY. This function ensures that
>> the DISPC registers are written at the right time by using the shadow register
>> programming model.
>>
>> The LCD manager configurations is stored as a private data of manager in APPLY.
>> It is treated as an extra info as it's the panel drivers which trigger this
>> apply via interface drivers, and not a DSS2 user like omapfb or omapdrm.
>>
>> Storing LCD manager related properties in APPLY also prevents the need to refer
>> to the panel connected to the manager for information. This helps in making the
>> DSS driver less dependent on panel.
>>
>> A helper function is added to check whether the manager is LCD or TV. The direct
>> DISPC register writes are removed from the interface drivers.
>
>
>
>> +static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
>> + struct dss_lcd_mgr_config config)
>> +{
>
> This one should take a pointer to the config, not a copy (and const).
>
>> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>> +
>> + mp->lcd_config = config;
>> + mp->extra_info_dirty = true;
>> +}
>> +
>> +void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
>> + struct dss_lcd_mgr_config config)
>
> And this.
Will fix these.
>
>> +{
>> + unsigned long flags;
>> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>> +
>> + mutex_lock(&apply_lock);
>> +
>> + if (mp->enabled)
>> + goto out;
>
> Hmm. Should we print a warning or such here? Isn't it a bug in the
> interface driver, if it tries to set the lcd config when the output is
> enabled?
Yes, we should add an error here. Will add it.
Archit
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drive
@ 2012-06-29 10:40 ` Archit Taneja
0 siblings, 0 replies; 32+ messages in thread
From: Archit Taneja @ 2012-06-29 10:40 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-fbdev, linux-omap
On Friday 29 June 2012 03:42 PM, Tomi Valkeinen wrote:
> On Thu, 2012-06-28 at 20:00 +0530, Archit Taneja wrote:
>> Replace the DISPC fuctions used to configure LCD channel related manager
>> parameters with dss_mgr_set_lcd_config() in APPLY. This function ensures that
>> the DISPC registers are written at the right time by using the shadow register
>> programming model.
>>
>> The LCD manager configurations is stored as a private data of manager in APPLY.
>> It is treated as an extra info as it's the panel drivers which trigger this
>> apply via interface drivers, and not a DSS2 user like omapfb or omapdrm.
>>
>> Storing LCD manager related properties in APPLY also prevents the need to refer
>> to the panel connected to the manager for information. This helps in making the
>> DSS driver less dependent on panel.
>>
>> A helper function is added to check whether the manager is LCD or TV. The direct
>> DISPC register writes are removed from the interface drivers.
>
>
>
>> +static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
>> + struct dss_lcd_mgr_config config)
>> +{
>
> This one should take a pointer to the config, not a copy (and const).
>
>> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>> +
>> + mp->lcd_config = config;
>> + mp->extra_info_dirty = true;
>> +}
>> +
>> +void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
>> + struct dss_lcd_mgr_config config)
>
> And this.
Will fix these.
>
>> +{
>> + unsigned long flags;
>> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>> +
>> + mutex_lock(&apply_lock);
>> +
>> + if (mp->enabled)
>> + goto out;
>
> Hmm. Should we print a warning or such here? Isn't it a bug in the
> interface driver, if it tries to set the lcd config when the output is
> enabled?
Yes, we should add an error here. Will add it.
Archit
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2012-06-29 10:40 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-28 14:30 [PATCH 00/12] OMAPDSS: Apply LCD manager related parameters Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 01/12] MAPDSS: DISPC: Change return type of dispc_mgr_set_clock_div() Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 01/12] OMAPDSS: " Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 02/12] OMAPDSS: Add struct to hold LCD overlay manager configuration Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 03/12] OMAPDSS: DPI: Configure dss_lcd_mgr_config struct with lcd manager parameters Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 04/12] OMAPDSS: RFBI: " Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 05/12] OMAPDSS: DSI: " Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 06/12] OMAPDSS: SDI: " Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drivers Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-29 10:12 ` [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drive Tomi Valkeinen
2012-06-29 10:12 ` [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drivers Tomi Valkeinen
2012-06-29 10:28 ` Archit Taneja
2012-06-29 10:40 ` [PATCH 07/12] OMAPDSS: APPLY: Remove DISPC writes to manager's lcd parameters in interface drive Archit Taneja
2012-06-28 14:30 ` [PATCH 08/12] OMAPDSS: MANAGER: Check LCD related overlay manager parameters Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 09/12] OMAPDSS: APPLY: Remove usage of omap_dss_device from manual/auto update checks Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 10/12] OMAPDSS: DISPC: Remove a redundant function Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 11/12] OMAPDSS: RFBI: Use dss_mgr_enable to enable the overlay manager Archit Taneja
2012-06-28 14:42 ` Archit Taneja
2012-06-28 14:30 ` [PATCH 12/12] OMAPDSS: OVERLAY: Clean up replication checking Archit Taneja
2012-06-28 14:42 ` Archit Taneja
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.