From: mathieu.poirier at linaro.org <mathieu.poirier@linaro.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND 00/11] Support for ST-Ericsson snowball board
Date: Wed, 4 Jul 2012 08:58:24 -0600 [thread overview]
Message-ID: <1341413915-7944-1-git-send-email-mathieu.poirier@linaro.org> (raw)
From: "Mathieu J. Poirier" <mathieu.poirier@linaro.org>
This set adds support for the ST-Ericsson u8500 based
snowball board. Doing so it moves u8500-href code around
to allow for code reuse between boards.
It was sent out more than three weeks ago, was modified after
comments were received but never got an official ACK.
Resending again in it's last revision.
John Rigby (1):
u8500: Separating mmc config parameters from driver
Mathieu J. Poirier (10):
snowball: Add support for ux500 based snowball board
u8500: Moving prcmu to cpu directory
snowball: Adding architecture dependent initialisation
snowball: Adding CPU clock initialisation
snowball: Moving to ux500.v2 addess scheme for PRCMU access
snowball: applying power to LAN and GBF controllers
u8500: Moving processor-specific functions to cpu area.
u8500: Enabling power to MMC device on AB8500 V2
armv7: Adding cpu specific cache managmenent
snowball: Adding board specific cache cleanup routine
arch/arm/cpu/armv7/cpu.c | 8 +
arch/arm/cpu/armv7/u8500/Makefile | 2 +-
arch/arm/cpu/armv7/u8500/clock.c | 34 +
arch/arm/cpu/armv7/u8500/cpu.c | 182 ++++++
arch/arm/cpu/armv7/u8500/prcmu.c | 229 +++++++
arch/arm/include/asm/arch-u8500/clock.h | 5 +-
arch/arm/include/asm/arch-u8500/db8500_gpio.h | 42 ++
arch/arm/include/asm/arch-u8500/db8500_pincfg.h | 172 ++++++
arch/arm/include/asm/arch-u8500/hardware.h | 33 +-
arch/arm/include/asm/arch-u8500/prcmu.h | 76 +++
arch/arm/include/asm/arch-u8500/sys_proto.h | 1 +
board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +-
board/st-ericsson/snowball/Makefile | 51 ++
board/st-ericsson/snowball/db8500_pins.h | 745 +++++++++++++++++++++++
board/st-ericsson/snowball/snowball.c | 367 +++++++++++
board/st-ericsson/u8500/Makefile | 2 +-
board/st-ericsson/u8500/prcmu-fw.h | 55 --
board/st-ericsson/u8500/prcmu.c | 165 -----
board/st-ericsson/u8500/u8500_href.c | 99 +---
boards.cfg | 1 +
drivers/gpio/Makefile | 1 +
drivers/gpio/db8500_gpio.c | 225 +++++++
drivers/mmc/arm_pl180_mmci.c | 132 ++---
drivers/mmc/arm_pl180_mmci.h | 27 +-
drivers/serial/serial_pl01x.c | 2 +
include/configs/snowball.h | 268 ++++++++
26 files changed, 2554 insertions(+), 391 deletions(-)
create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c
create mode 100644 arch/arm/cpu/armv7/u8500/prcmu.c
create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h
create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h
create mode 100644 arch/arm/include/asm/arch-u8500/prcmu.h
create mode 100644 board/st-ericsson/snowball/Makefile
create mode 100644 board/st-ericsson/snowball/db8500_pins.h
create mode 100644 board/st-ericsson/snowball/snowball.c
delete mode 100644 board/st-ericsson/u8500/prcmu-fw.h
delete mode 100644 board/st-ericsson/u8500/prcmu.c
create mode 100644 drivers/gpio/db8500_gpio.c
create mode 100644 include/configs/snowball.h
--
1.7.5.4
next reply other threads:[~2012-07-04 14:58 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-04 14:58 mathieu.poirier at linaro.org [this message]
2012-07-04 14:58 ` [U-Boot] [RESEND 01/11] snowball: Add support for ux500 based snowball board mathieu.poirier at linaro.org
2012-07-04 18:51 ` Wolfgang Denk
2012-07-04 14:58 ` [U-Boot] [RESEND 02/11] u8500: Moving prcmu to cpu directory mathieu.poirier at linaro.org
2012-07-04 18:52 ` Wolfgang Denk
2012-07-04 14:58 ` [U-Boot] [RESEND 03/11] snowball: Adding architecture dependent initialisation mathieu.poirier at linaro.org
2012-07-04 14:58 ` [U-Boot] [RESEND 04/11] snowball: Adding CPU clock initialisation mathieu.poirier at linaro.org
2012-07-04 14:58 ` [U-Boot] [RESEND 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access mathieu.poirier at linaro.org
2012-07-04 14:58 ` [U-Boot] [RESEND 06/11] snowball: applying power to LAN and GBF controllers mathieu.poirier at linaro.org
2012-07-04 14:58 ` [U-Boot] [RESEND 07/11] u8500: Moving processor-specific functions to cpu area mathieu.poirier at linaro.org
2012-07-04 14:58 ` [U-Boot] [RESEND 08/11] u8500: Enabling power to MMC device on AB8500 V2 mathieu.poirier at linaro.org
2012-07-04 14:58 ` [U-Boot] [RESEND 09/11] u8500: Separating mmc config parameters from driver mathieu.poirier at linaro.org
2012-07-04 14:58 ` [U-Boot] [RESEND 10/11] armv7: Adding cpu specific cache managmenent mathieu.poirier at linaro.org
2012-07-04 14:58 ` [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine mathieu.poirier at linaro.org
2012-07-04 18:53 ` Wolfgang Denk
2012-07-04 19:53 ` Mathieu Poirier
2012-07-04 20:13 ` Fabio Estevam
2012-07-04 20:19 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341413915-7944-1-git-send-email-mathieu.poirier@linaro.org \
--to=mathieu.poirier@linaro.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.