* [PATCH v3] Fixes related to processing of qemu's -numa option
@ 2012-07-05 16:49 ` Chegu Vinod
0 siblings, 0 replies; 4+ messages in thread
From: Chegu Vinod @ 2012-07-05 16:49 UTC (permalink / raw)
To: qemu-devel; +Cc: kvm, Chegu Vinod, Jim Hull, Craig Hada
Changes since v2:
- Using "unsigned long *" for the node_cpumask[].
- Use bitmap_new() instead of g_malloc0() for allocation.
- Don't rely on "max_cpus" since it may not be initialized
before the numa related qemu options are parsed & processed.
Note: Continuing to use a new constant for allocation of
the mask (This constant is currently set to 255 since
with an 8bit APIC ID VCPUs can range from 0-254 in a
guest. The APIC ID 255 (0xFF) is reserved for broadcast).
Changes since v1:
----------------
- Use bitmap functions that are already in qemu (instead
of cpu_set_t macro's from sched.h)
- Added a check for endvalue >= max_cpus.
- Fix to address the round-robbing assignment when
cpu's are not explicitly specified.
Tested-by: Eduardo Habkost <ehabkost <at> redhat.com>
-----------------------------------------------
v1:
--
The -numa option to qemu is used to create [fake] numa nodes
and expose them to the guest OS instance.
There are a couple of issues with the -numa option:
a) Max VCPU's that can be specified for a guest while using
the qemu's -numa option is 64. Due to a typecasting issue
when the number of VCPUs is > 32 the VCPUs don't show up
under the specified [fake] numa nodes.
b) KVM currently has support for 160VCPUs per guest. The
qemu's -numa option has only support for upto 64VCPUs
per guest.
This patch addresses these two issues.
Below are examples of (a) and (b)
a) >32 VCPUs are specified with the -numa option:
/usr/local/bin/qemu-system-x86_64 \
-enable-kvm \
71:01:01 \
-net tap,ifname=tap0,script=no,downscript=no \
-vnc :4
...
Upstream qemu :
--------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
6 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 32 33 34 35 36 37 38 39 40 41
node 0 size: 131072 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51
node 1 size: 131072 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59
node 2 size: 131072 MB
node 3 cpus: 30
node 3 size: 131072 MB
node 4 cpus:
node 4 size: 131072 MB
node 5 cpus: 31
node 5 size: 131072 MB
With the patch applied :
-----------------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
6 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9
node 0 size: 131072 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19
node 1 size: 131072 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29
node 2 size: 131072 MB
node 3 cpus: 30 31 32 33 34 35 36 37 38 39
node 3 size: 131072 MB
node 4 cpus: 40 41 42 43 44 45 46 47 48 49
node 4 size: 131072 MB
node 5 cpus: 50 51 52 53 54 55 56 57 58 59
node 5 size: 131072 MB
b) >64 VCPUs specified with -numa option:
/usr/local/bin/qemu-system-x86_64 \
-enable-kvm \
-cpu Westmere,+rdtscp,+pdpe1gb,+dca,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pclmuldq,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme \
-smp sockets=8,cores=10,threads=1 \
-numa node,nodeid=0,cpus=0-9,mem=64g \
-numa node,nodeid=1,cpus=10-19,mem=64g \
-numa node,nodeid=2,cpus=20-29,mem=64g \
-numa node,nodeid=3,cpus=30-39,mem=64g \
-numa node,nodeid=4,cpus=40-49,mem=64g \
-numa node,nodeid=5,cpus=50-59,mem=64g \
-numa node,nodeid=6,cpus=60-69,mem=64g \
-numa node,nodeid=7,cpus=70-79,mem=64g \
-m 524288 \
-name vm1 \
-chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/vm1.monitor,server,nowait \
-drive file=/dev/libvirt_lvm/vm.img,if=none,id=drive-virtio-disk0,format=raw,cache=none,aio=native \
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-monitor stdio \
-net nic,macaddr=52:54:00:71:01:01 \
-net tap,ifname=tap0,script=no,downscript=no \
-vnc :4
...
Upstream qemu :
--------------
only 63 CPUs in NUMA mode supported.
only 64 CPUs in NUMA mode supported.
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
8 nodes
node 0 cpus: 6 7 8 9 38 39 40 41 70 71 72 73
node 0 size: 65536 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51 74 75 76 77 78 79
node 1 size: 65536 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59 60 61
node 2 size: 65536 MB
node 3 cpus: 30 62
node 3 size: 65536 MB
node 4 cpus:
node 4 size: 65536 MB
node 5 cpus:
node 5 size: 65536 MB
node 6 cpus: 31 63
node 6 size: 65536 MB
node 7 cpus: 0 1 2 3 4 5 32 33 34 35 36 37 64 65 66 67 68 69
node 7 size: 65536 MB
With the patch applied :
-----------------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
8 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9
node 0 size: 65536 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19
node 1 size: 65536 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29
node 2 size: 65536 MB
node 3 cpus: 30 31 32 33 34 35 36 37 38 39
node 3 size: 65536 MB
node 4 cpus: 40 41 42 43 44 45 46 47 48 49
node 4 size: 65536 MB
node 5 cpus: 50 51 52 53 54 55 56 57 58 59
node 5 size: 65536 MB
node 6 cpus: 60 61 62 63 64 65 66 67 68 69
node 6 size: 65536 MB
node 7 cpus: 70 71 72 73 74 75 76 77 78 79
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>, Jim Hull <jim.hull@hp.com>, Craig Hada <craig.hada@hp.com>
Tested-by: Eduardo Habkost <ehabkost <at> redhat.com>
---
cpus.c | 3 ++-
hw/pc.c | 3 ++-
sysemu.h | 3 ++-
vl.c | 48 ++++++++++++++++++++++++++----------------------
4 files changed, 32 insertions(+), 25 deletions(-)
diff --git a/cpus.c b/cpus.c
index b182b3d..acccd08 100644
--- a/cpus.c
+++ b/cpus.c
@@ -36,6 +36,7 @@
#include "cpus.h"
#include "qtest.h"
#include "main-loop.h"
+#include "bitmap.h"
#ifndef _WIN32
#include "compatfd.h"
@@ -1145,7 +1146,7 @@ void set_numa_modes(void)
for (env = first_cpu; env != NULL; env = env->next_cpu) {
for (i = 0; i < nb_numa_nodes; i++) {
- if (node_cpumask[i] & (1 << env->cpu_index)) {
+ if (test_bit(env->cpu_index, node_cpumask[i])) {
env->numa_node = i;
}
}
diff --git a/hw/pc.c b/hw/pc.c
index c7e9ab3..2edcc07 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -48,6 +48,7 @@
#include "memory.h"
#include "exec-memory.h"
#include "arch_init.h"
+#include "bitmap.h"
/* output Bochs bios info messages */
//#define DEBUG_BIOS
@@ -639,7 +640,7 @@ static void *bochs_bios_init(void)
numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
for (i = 0; i < max_cpus; i++) {
for (j = 0; j < nb_numa_nodes; j++) {
- if (node_cpumask[j] & (1 << i)) {
+ if (test_bit(i, node_cpumask[j])) {
numa_fw_cfg[i + 1] = cpu_to_le64(j);
break;
}
diff --git a/sysemu.h b/sysemu.h
index bc2c788..2ce63fc 100644
--- a/sysemu.h
+++ b/sysemu.h
@@ -133,9 +133,10 @@ extern uint8_t qemu_extra_params_fw[2];
extern QEMUClock *rtc_clock;
#define MAX_NODES 64
+#define MAX_CPUMASK_BITS 255
extern int nb_numa_nodes;
extern uint64_t node_mem[MAX_NODES];
-extern uint64_t node_cpumask[MAX_NODES];
+extern unsigned long *node_cpumask[MAX_NODES];
#define MAX_OPTION_ROMS 16
typedef struct QEMUOptionRom {
diff --git a/vl.c b/vl.c
index 1329c30..fdd7b74 100644
--- a/vl.c
+++ b/vl.c
@@ -28,6 +28,7 @@
#include <errno.h>
#include <sys/time.h>
#include <zlib.h>
+#include "bitmap.h"
/* Needed early for CONFIG_BSD etc. */
#include "config-host.h"
@@ -240,7 +241,7 @@ QTAILQ_HEAD(, FWBootEntry) fw_boot_order = QTAILQ_HEAD_INITIALIZER(fw_boot_order
int nb_numa_nodes;
uint64_t node_mem[MAX_NODES];
-uint64_t node_cpumask[MAX_NODES];
+unsigned long *node_cpumask[MAX_NODES];
uint8_t qemu_uuid[16];
@@ -950,6 +951,9 @@ static void numa_add(const char *optarg)
char *endptr;
unsigned long long value, endvalue;
int nodenr;
+ int i;
+
+ value = endvalue = 0ULL;
optarg = get_opt_name(option, 128, optarg, ',') + 1;
if (!strcmp(option, "node")) {
@@ -970,27 +974,25 @@ static void numa_add(const char *optarg)
}
node_mem[nodenr] = sval;
}
- if (get_param_value(option, 128, "cpus", optarg) == 0) {
- node_cpumask[nodenr] = 0;
- } else {
+ if (get_param_value(option, 128, "cpus", optarg) != 0) {
value = strtoull(option, &endptr, 10);
- if (value >= 64) {
- value = 63;
- fprintf(stderr, "only 64 CPUs in NUMA mode supported.\n");
+ if (*endptr == '-') {
+ endvalue = strtoull(endptr+1, &endptr, 10);
} else {
- if (*endptr == '-') {
- endvalue = strtoull(endptr+1, &endptr, 10);
- if (endvalue >= 63) {
- endvalue = 62;
- fprintf(stderr,
- "only 63 CPUs in NUMA mode supported.\n");
- }
- value = (2ULL << endvalue) - (1ULL << value);
- } else {
- value = 1ULL << value;
- }
+ endvalue = value;
+ }
+
+
+ if (!(endvalue < MAX_CPUMASK_BITS)) {
+ endvalue = MAX_CPUMASK_BITS - 1;
+ fprintf(stderr,
+ "A max of %d CPUs are supported in a guest\n",
+ MAX_CPUMASK_BITS);
+ }
+
+ for (i = value; i <= endvalue; ++i) {
+ set_bit(i, node_cpumask[nodenr]);
}
- node_cpumask[nodenr] = value;
}
nb_numa_nodes++;
}
@@ -2331,7 +2333,8 @@ int main(int argc, char **argv, char **envp)
for (i = 0; i < MAX_NODES; i++) {
node_mem[i] = 0;
- node_cpumask[i] = 0;
+ node_cpumask[i] = bitmap_new(MAX_CPUMASK_BITS);
+ bitmap_zero(node_cpumask[i], MAX_CPUMASK_BITS);
}
nb_numa_nodes = 0;
@@ -3469,8 +3472,9 @@ int main(int argc, char **argv, char **envp)
}
for (i = 0; i < nb_numa_nodes; i++) {
- if (node_cpumask[i] != 0)
+ if (!bitmap_empty(node_cpumask[i], MAX_CPUMASK_BITS)) {
break;
+ }
}
/* assigning the VCPUs round-robin is easier to implement, guest OSes
* must cope with this anyway, because there are BIOSes out there in
@@ -3478,7 +3482,7 @@ int main(int argc, char **argv, char **envp)
*/
if (i == nb_numa_nodes) {
for (i = 0; i < max_cpus; i++) {
- node_cpumask[i % nb_numa_nodes] |= 1 << i;
+ set_bit(i, node_cpumask[i % nb_numa_nodes]);
}
}
}
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [Qemu-devel] [PATCH v3] Fixes related to processing of qemu's -numa option
@ 2012-07-05 16:49 ` Chegu Vinod
0 siblings, 0 replies; 4+ messages in thread
From: Chegu Vinod @ 2012-07-05 16:49 UTC (permalink / raw)
To: qemu-devel; +Cc: Jim Hull, Chegu Vinod, Craig Hada, kvm
Changes since v2:
- Using "unsigned long *" for the node_cpumask[].
- Use bitmap_new() instead of g_malloc0() for allocation.
- Don't rely on "max_cpus" since it may not be initialized
before the numa related qemu options are parsed & processed.
Note: Continuing to use a new constant for allocation of
the mask (This constant is currently set to 255 since
with an 8bit APIC ID VCPUs can range from 0-254 in a
guest. The APIC ID 255 (0xFF) is reserved for broadcast).
Changes since v1:
----------------
- Use bitmap functions that are already in qemu (instead
of cpu_set_t macro's from sched.h)
- Added a check for endvalue >= max_cpus.
- Fix to address the round-robbing assignment when
cpu's are not explicitly specified.
Tested-by: Eduardo Habkost <ehabkost <at> redhat.com>
-----------------------------------------------
v1:
--
The -numa option to qemu is used to create [fake] numa nodes
and expose them to the guest OS instance.
There are a couple of issues with the -numa option:
a) Max VCPU's that can be specified for a guest while using
the qemu's -numa option is 64. Due to a typecasting issue
when the number of VCPUs is > 32 the VCPUs don't show up
under the specified [fake] numa nodes.
b) KVM currently has support for 160VCPUs per guest. The
qemu's -numa option has only support for upto 64VCPUs
per guest.
This patch addresses these two issues.
Below are examples of (a) and (b)
a) >32 VCPUs are specified with the -numa option:
/usr/local/bin/qemu-system-x86_64 \
-enable-kvm \
71:01:01 \
-net tap,ifname=tap0,script=no,downscript=no \
-vnc :4
...
Upstream qemu :
--------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
6 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 32 33 34 35 36 37 38 39 40 41
node 0 size: 131072 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51
node 1 size: 131072 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59
node 2 size: 131072 MB
node 3 cpus: 30
node 3 size: 131072 MB
node 4 cpus:
node 4 size: 131072 MB
node 5 cpus: 31
node 5 size: 131072 MB
With the patch applied :
-----------------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
6 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9
node 0 size: 131072 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19
node 1 size: 131072 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29
node 2 size: 131072 MB
node 3 cpus: 30 31 32 33 34 35 36 37 38 39
node 3 size: 131072 MB
node 4 cpus: 40 41 42 43 44 45 46 47 48 49
node 4 size: 131072 MB
node 5 cpus: 50 51 52 53 54 55 56 57 58 59
node 5 size: 131072 MB
b) >64 VCPUs specified with -numa option:
/usr/local/bin/qemu-system-x86_64 \
-enable-kvm \
-cpu Westmere,+rdtscp,+pdpe1gb,+dca,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pclmuldq,+pbe,+tm,+ht,+ss,+acpi,+ds,+vme \
-smp sockets=8,cores=10,threads=1 \
-numa node,nodeid=0,cpus=0-9,mem=64g \
-numa node,nodeid=1,cpus=10-19,mem=64g \
-numa node,nodeid=2,cpus=20-29,mem=64g \
-numa node,nodeid=3,cpus=30-39,mem=64g \
-numa node,nodeid=4,cpus=40-49,mem=64g \
-numa node,nodeid=5,cpus=50-59,mem=64g \
-numa node,nodeid=6,cpus=60-69,mem=64g \
-numa node,nodeid=7,cpus=70-79,mem=64g \
-m 524288 \
-name vm1 \
-chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/vm1.monitor,server,nowait \
-drive file=/dev/libvirt_lvm/vm.img,if=none,id=drive-virtio-disk0,format=raw,cache=none,aio=native \
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 \
-monitor stdio \
-net nic,macaddr=52:54:00:71:01:01 \
-net tap,ifname=tap0,script=no,downscript=no \
-vnc :4
...
Upstream qemu :
--------------
only 63 CPUs in NUMA mode supported.
only 64 CPUs in NUMA mode supported.
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
8 nodes
node 0 cpus: 6 7 8 9 38 39 40 41 70 71 72 73
node 0 size: 65536 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51 74 75 76 77 78 79
node 1 size: 65536 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59 60 61
node 2 size: 65536 MB
node 3 cpus: 30 62
node 3 size: 65536 MB
node 4 cpus:
node 4 size: 65536 MB
node 5 cpus:
node 5 size: 65536 MB
node 6 cpus: 31 63
node 6 size: 65536 MB
node 7 cpus: 0 1 2 3 4 5 32 33 34 35 36 37 64 65 66 67 68 69
node 7 size: 65536 MB
With the patch applied :
-----------------------
QEMU 1.1.50 monitor - type 'help' for more information
(qemu) info numa
8 nodes
node 0 cpus: 0 1 2 3 4 5 6 7 8 9
node 0 size: 65536 MB
node 1 cpus: 10 11 12 13 14 15 16 17 18 19
node 1 size: 65536 MB
node 2 cpus: 20 21 22 23 24 25 26 27 28 29
node 2 size: 65536 MB
node 3 cpus: 30 31 32 33 34 35 36 37 38 39
node 3 size: 65536 MB
node 4 cpus: 40 41 42 43 44 45 46 47 48 49
node 4 size: 65536 MB
node 5 cpus: 50 51 52 53 54 55 56 57 58 59
node 5 size: 65536 MB
node 6 cpus: 60 61 62 63 64 65 66 67 68 69
node 6 size: 65536 MB
node 7 cpus: 70 71 72 73 74 75 76 77 78 79
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>, Jim Hull <jim.hull@hp.com>, Craig Hada <craig.hada@hp.com>
Tested-by: Eduardo Habkost <ehabkost <at> redhat.com>
---
cpus.c | 3 ++-
hw/pc.c | 3 ++-
sysemu.h | 3 ++-
vl.c | 48 ++++++++++++++++++++++++++----------------------
4 files changed, 32 insertions(+), 25 deletions(-)
diff --git a/cpus.c b/cpus.c
index b182b3d..acccd08 100644
--- a/cpus.c
+++ b/cpus.c
@@ -36,6 +36,7 @@
#include "cpus.h"
#include "qtest.h"
#include "main-loop.h"
+#include "bitmap.h"
#ifndef _WIN32
#include "compatfd.h"
@@ -1145,7 +1146,7 @@ void set_numa_modes(void)
for (env = first_cpu; env != NULL; env = env->next_cpu) {
for (i = 0; i < nb_numa_nodes; i++) {
- if (node_cpumask[i] & (1 << env->cpu_index)) {
+ if (test_bit(env->cpu_index, node_cpumask[i])) {
env->numa_node = i;
}
}
diff --git a/hw/pc.c b/hw/pc.c
index c7e9ab3..2edcc07 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -48,6 +48,7 @@
#include "memory.h"
#include "exec-memory.h"
#include "arch_init.h"
+#include "bitmap.h"
/* output Bochs bios info messages */
//#define DEBUG_BIOS
@@ -639,7 +640,7 @@ static void *bochs_bios_init(void)
numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
for (i = 0; i < max_cpus; i++) {
for (j = 0; j < nb_numa_nodes; j++) {
- if (node_cpumask[j] & (1 << i)) {
+ if (test_bit(i, node_cpumask[j])) {
numa_fw_cfg[i + 1] = cpu_to_le64(j);
break;
}
diff --git a/sysemu.h b/sysemu.h
index bc2c788..2ce63fc 100644
--- a/sysemu.h
+++ b/sysemu.h
@@ -133,9 +133,10 @@ extern uint8_t qemu_extra_params_fw[2];
extern QEMUClock *rtc_clock;
#define MAX_NODES 64
+#define MAX_CPUMASK_BITS 255
extern int nb_numa_nodes;
extern uint64_t node_mem[MAX_NODES];
-extern uint64_t node_cpumask[MAX_NODES];
+extern unsigned long *node_cpumask[MAX_NODES];
#define MAX_OPTION_ROMS 16
typedef struct QEMUOptionRom {
diff --git a/vl.c b/vl.c
index 1329c30..fdd7b74 100644
--- a/vl.c
+++ b/vl.c
@@ -28,6 +28,7 @@
#include <errno.h>
#include <sys/time.h>
#include <zlib.h>
+#include "bitmap.h"
/* Needed early for CONFIG_BSD etc. */
#include "config-host.h"
@@ -240,7 +241,7 @@ QTAILQ_HEAD(, FWBootEntry) fw_boot_order = QTAILQ_HEAD_INITIALIZER(fw_boot_order
int nb_numa_nodes;
uint64_t node_mem[MAX_NODES];
-uint64_t node_cpumask[MAX_NODES];
+unsigned long *node_cpumask[MAX_NODES];
uint8_t qemu_uuid[16];
@@ -950,6 +951,9 @@ static void numa_add(const char *optarg)
char *endptr;
unsigned long long value, endvalue;
int nodenr;
+ int i;
+
+ value = endvalue = 0ULL;
optarg = get_opt_name(option, 128, optarg, ',') + 1;
if (!strcmp(option, "node")) {
@@ -970,27 +974,25 @@ static void numa_add(const char *optarg)
}
node_mem[nodenr] = sval;
}
- if (get_param_value(option, 128, "cpus", optarg) == 0) {
- node_cpumask[nodenr] = 0;
- } else {
+ if (get_param_value(option, 128, "cpus", optarg) != 0) {
value = strtoull(option, &endptr, 10);
- if (value >= 64) {
- value = 63;
- fprintf(stderr, "only 64 CPUs in NUMA mode supported.\n");
+ if (*endptr == '-') {
+ endvalue = strtoull(endptr+1, &endptr, 10);
} else {
- if (*endptr == '-') {
- endvalue = strtoull(endptr+1, &endptr, 10);
- if (endvalue >= 63) {
- endvalue = 62;
- fprintf(stderr,
- "only 63 CPUs in NUMA mode supported.\n");
- }
- value = (2ULL << endvalue) - (1ULL << value);
- } else {
- value = 1ULL << value;
- }
+ endvalue = value;
+ }
+
+
+ if (!(endvalue < MAX_CPUMASK_BITS)) {
+ endvalue = MAX_CPUMASK_BITS - 1;
+ fprintf(stderr,
+ "A max of %d CPUs are supported in a guest\n",
+ MAX_CPUMASK_BITS);
+ }
+
+ for (i = value; i <= endvalue; ++i) {
+ set_bit(i, node_cpumask[nodenr]);
}
- node_cpumask[nodenr] = value;
}
nb_numa_nodes++;
}
@@ -2331,7 +2333,8 @@ int main(int argc, char **argv, char **envp)
for (i = 0; i < MAX_NODES; i++) {
node_mem[i] = 0;
- node_cpumask[i] = 0;
+ node_cpumask[i] = bitmap_new(MAX_CPUMASK_BITS);
+ bitmap_zero(node_cpumask[i], MAX_CPUMASK_BITS);
}
nb_numa_nodes = 0;
@@ -3469,8 +3472,9 @@ int main(int argc, char **argv, char **envp)
}
for (i = 0; i < nb_numa_nodes; i++) {
- if (node_cpumask[i] != 0)
+ if (!bitmap_empty(node_cpumask[i], MAX_CPUMASK_BITS)) {
break;
+ }
}
/* assigning the VCPUs round-robin is easier to implement, guest OSes
* must cope with this anyway, because there are BIOSes out there in
@@ -3478,7 +3482,7 @@ int main(int argc, char **argv, char **envp)
*/
if (i == nb_numa_nodes) {
for (i = 0; i < max_cpus; i++) {
- node_cpumask[i % nb_numa_nodes] |= 1 << i;
+ set_bit(i, node_cpumask[i % nb_numa_nodes]);
}
}
}
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v3] Fixes related to processing of qemu's -numa option
2012-07-05 16:49 ` [Qemu-devel] " Chegu Vinod
@ 2012-07-10 17:16 ` Eduardo Habkost
-1 siblings, 0 replies; 4+ messages in thread
From: Eduardo Habkost @ 2012-07-10 17:16 UTC (permalink / raw)
To: Chegu Vinod; +Cc: qemu-devel, Jim Hull, Craig Hada, kvm
On Thu, Jul 05, 2012 at 09:49:40AM -0700, Chegu Vinod wrote:
> Changes since v2:
> - Using "unsigned long *" for the node_cpumask[].
> - Use bitmap_new() instead of g_malloc0() for allocation.
> - Don't rely on "max_cpus" since it may not be initialized
> before the numa related qemu options are parsed & processed.
>
> Note: Continuing to use a new constant for allocation of
> the mask (This constant is currently set to 255 since
> with an 8bit APIC ID VCPUs can range from 0-254 in a
> guest. The APIC ID 255 (0xFF) is reserved for broadcast).
That means that depending on core/thread topology, we may have an even
smaller limit.
(But that will be a problem only after we fix the APIC-ID CPU topology
bug we have)
>
>
[...]
> Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>, Jim Hull <jim.hull@hp.com>, Craig Hada <craig.hada@hp.com>
> Tested-by: Eduardo Habkost <ehabkost <at> redhat.com>
Actually I had not tested this version yet, when you submitted it. But
now I have tested it.
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Other minor comments below:
> ---
> cpus.c | 3 ++-
> hw/pc.c | 3 ++-
> sysemu.h | 3 ++-
> vl.c | 48 ++++++++++++++++++++++++++----------------------
> 4 files changed, 32 insertions(+), 25 deletions(-)
>
> diff --git a/cpus.c b/cpus.c
> index b182b3d..acccd08 100644
> --- a/cpus.c
> +++ b/cpus.c
> @@ -36,6 +36,7 @@
> #include "cpus.h"
> #include "qtest.h"
> #include "main-loop.h"
> +#include "bitmap.h"
>
> #ifndef _WIN32
> #include "compatfd.h"
> @@ -1145,7 +1146,7 @@ void set_numa_modes(void)
>
> for (env = first_cpu; env != NULL; env = env->next_cpu) {
> for (i = 0; i < nb_numa_nodes; i++) {
> - if (node_cpumask[i] & (1 << env->cpu_index)) {
> + if (test_bit(env->cpu_index, node_cpumask[i])) {
> env->numa_node = i;
> }
> }
> diff --git a/hw/pc.c b/hw/pc.c
> index c7e9ab3..2edcc07 100644
> --- a/hw/pc.c
> +++ b/hw/pc.c
> @@ -48,6 +48,7 @@
> #include "memory.h"
> #include "exec-memory.h"
> #include "arch_init.h"
> +#include "bitmap.h"
>
> /* output Bochs bios info messages */
> //#define DEBUG_BIOS
> @@ -639,7 +640,7 @@ static void *bochs_bios_init(void)
> numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
> for (i = 0; i < max_cpus; i++) {
> for (j = 0; j < nb_numa_nodes; j++) {
> - if (node_cpumask[j] & (1 << i)) {
> + if (test_bit(i, node_cpumask[j])) {
> numa_fw_cfg[i + 1] = cpu_to_le64(j);
> break;
> }
> diff --git a/sysemu.h b/sysemu.h
> index bc2c788..2ce63fc 100644
> --- a/sysemu.h
> +++ b/sysemu.h
> @@ -133,9 +133,10 @@ extern uint8_t qemu_extra_params_fw[2];
> extern QEMUClock *rtc_clock;
>
> #define MAX_NODES 64
> +#define MAX_CPUMASK_BITS 255
> extern int nb_numa_nodes;
> extern uint64_t node_mem[MAX_NODES];
> -extern uint64_t node_cpumask[MAX_NODES];
> +extern unsigned long *node_cpumask[MAX_NODES];
>
> #define MAX_OPTION_ROMS 16
> typedef struct QEMUOptionRom {
> diff --git a/vl.c b/vl.c
> index 1329c30..fdd7b74 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -28,6 +28,7 @@
> #include <errno.h>
> #include <sys/time.h>
> #include <zlib.h>
> +#include "bitmap.h"
>
> /* Needed early for CONFIG_BSD etc. */
> #include "config-host.h"
> @@ -240,7 +241,7 @@ QTAILQ_HEAD(, FWBootEntry) fw_boot_order = QTAILQ_HEAD_INITIALIZER(fw_boot_order
>
> int nb_numa_nodes;
> uint64_t node_mem[MAX_NODES];
> -uint64_t node_cpumask[MAX_NODES];
> +unsigned long *node_cpumask[MAX_NODES];
>
> uint8_t qemu_uuid[16];
>
> @@ -950,6 +951,9 @@ static void numa_add(const char *optarg)
> char *endptr;
> unsigned long long value, endvalue;
> int nodenr;
> + int i;
> +
> + value = endvalue = 0ULL;
>
> optarg = get_opt_name(option, 128, optarg, ',') + 1;
> if (!strcmp(option, "node")) {
> @@ -970,27 +974,25 @@ static void numa_add(const char *optarg)
> }
> node_mem[nodenr] = sval;
> }
> - if (get_param_value(option, 128, "cpus", optarg) == 0) {
> - node_cpumask[nodenr] = 0;
> - } else {
> + if (get_param_value(option, 128, "cpus", optarg) != 0) {
> value = strtoull(option, &endptr, 10);
> - if (value >= 64) {
> - value = 63;
> - fprintf(stderr, "only 64 CPUs in NUMA mode supported.\n");
> + if (*endptr == '-') {
> + endvalue = strtoull(endptr+1, &endptr, 10);
> } else {
> - if (*endptr == '-') {
> - endvalue = strtoull(endptr+1, &endptr, 10);
> - if (endvalue >= 63) {
> - endvalue = 62;
> - fprintf(stderr,
> - "only 63 CPUs in NUMA mode supported.\n");
> - }
> - value = (2ULL << endvalue) - (1ULL << value);
> - } else {
> - value = 1ULL << value;
> - }
> + endvalue = value;
> + }
> +
> +
> + if (!(endvalue < MAX_CPUMASK_BITS)) {
> + endvalue = MAX_CPUMASK_BITS - 1;
> + fprintf(stderr,
> + "A max of %d CPUs are supported in a guest\n",
> + MAX_CPUMASK_BITS);
> + }
> +
> + for (i = value; i <= endvalue; ++i) {
> + set_bit(i, node_cpumask[nodenr]);
> }
Nit: you could optimize this using bitmap_set(), but it's not a big
deal.
> - node_cpumask[nodenr] = value;
> }
> nb_numa_nodes++;
> }
> @@ -2331,7 +2333,8 @@ int main(int argc, char **argv, char **envp)
>
> for (i = 0; i < MAX_NODES; i++) {
> node_mem[i] = 0;
> - node_cpumask[i] = 0;
> + node_cpumask[i] = bitmap_new(MAX_CPUMASK_BITS);
> + bitmap_zero(node_cpumask[i], MAX_CPUMASK_BITS);
bitmap_new() already returns a zeroed bitmap, it seems.
> }
>
> nb_numa_nodes = 0;
> @@ -3469,8 +3472,9 @@ int main(int argc, char **argv, char **envp)
> }
>
> for (i = 0; i < nb_numa_nodes; i++) {
> - if (node_cpumask[i] != 0)
> + if (!bitmap_empty(node_cpumask[i], MAX_CPUMASK_BITS)) {
> break;
> + }
> }
> /* assigning the VCPUs round-robin is easier to implement, guest OSes
> * must cope with this anyway, because there are BIOSes out there in
> @@ -3478,7 +3482,7 @@ int main(int argc, char **argv, char **envp)
> */
> if (i == nb_numa_nodes) {
> for (i = 0; i < max_cpus; i++) {
> - node_cpumask[i % nb_numa_nodes] |= 1 << i;
> + set_bit(i, node_cpumask[i % nb_numa_nodes]);
> }
> }
> }
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
--
Eduardo
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v3] Fixes related to processing of qemu's -numa option
@ 2012-07-10 17:16 ` Eduardo Habkost
0 siblings, 0 replies; 4+ messages in thread
From: Eduardo Habkost @ 2012-07-10 17:16 UTC (permalink / raw)
To: Chegu Vinod; +Cc: Jim Hull, qemu-devel, Craig Hada, kvm
On Thu, Jul 05, 2012 at 09:49:40AM -0700, Chegu Vinod wrote:
> Changes since v2:
> - Using "unsigned long *" for the node_cpumask[].
> - Use bitmap_new() instead of g_malloc0() for allocation.
> - Don't rely on "max_cpus" since it may not be initialized
> before the numa related qemu options are parsed & processed.
>
> Note: Continuing to use a new constant for allocation of
> the mask (This constant is currently set to 255 since
> with an 8bit APIC ID VCPUs can range from 0-254 in a
> guest. The APIC ID 255 (0xFF) is reserved for broadcast).
That means that depending on core/thread topology, we may have an even
smaller limit.
(But that will be a problem only after we fix the APIC-ID CPU topology
bug we have)
>
>
[...]
> Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>, Jim Hull <jim.hull@hp.com>, Craig Hada <craig.hada@hp.com>
> Tested-by: Eduardo Habkost <ehabkost <at> redhat.com>
Actually I had not tested this version yet, when you submitted it. But
now I have tested it.
Tested-by: Eduardo Habkost <ehabkost@redhat.com>
Other minor comments below:
> ---
> cpus.c | 3 ++-
> hw/pc.c | 3 ++-
> sysemu.h | 3 ++-
> vl.c | 48 ++++++++++++++++++++++++++----------------------
> 4 files changed, 32 insertions(+), 25 deletions(-)
>
> diff --git a/cpus.c b/cpus.c
> index b182b3d..acccd08 100644
> --- a/cpus.c
> +++ b/cpus.c
> @@ -36,6 +36,7 @@
> #include "cpus.h"
> #include "qtest.h"
> #include "main-loop.h"
> +#include "bitmap.h"
>
> #ifndef _WIN32
> #include "compatfd.h"
> @@ -1145,7 +1146,7 @@ void set_numa_modes(void)
>
> for (env = first_cpu; env != NULL; env = env->next_cpu) {
> for (i = 0; i < nb_numa_nodes; i++) {
> - if (node_cpumask[i] & (1 << env->cpu_index)) {
> + if (test_bit(env->cpu_index, node_cpumask[i])) {
> env->numa_node = i;
> }
> }
> diff --git a/hw/pc.c b/hw/pc.c
> index c7e9ab3..2edcc07 100644
> --- a/hw/pc.c
> +++ b/hw/pc.c
> @@ -48,6 +48,7 @@
> #include "memory.h"
> #include "exec-memory.h"
> #include "arch_init.h"
> +#include "bitmap.h"
>
> /* output Bochs bios info messages */
> //#define DEBUG_BIOS
> @@ -639,7 +640,7 @@ static void *bochs_bios_init(void)
> numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
> for (i = 0; i < max_cpus; i++) {
> for (j = 0; j < nb_numa_nodes; j++) {
> - if (node_cpumask[j] & (1 << i)) {
> + if (test_bit(i, node_cpumask[j])) {
> numa_fw_cfg[i + 1] = cpu_to_le64(j);
> break;
> }
> diff --git a/sysemu.h b/sysemu.h
> index bc2c788..2ce63fc 100644
> --- a/sysemu.h
> +++ b/sysemu.h
> @@ -133,9 +133,10 @@ extern uint8_t qemu_extra_params_fw[2];
> extern QEMUClock *rtc_clock;
>
> #define MAX_NODES 64
> +#define MAX_CPUMASK_BITS 255
> extern int nb_numa_nodes;
> extern uint64_t node_mem[MAX_NODES];
> -extern uint64_t node_cpumask[MAX_NODES];
> +extern unsigned long *node_cpumask[MAX_NODES];
>
> #define MAX_OPTION_ROMS 16
> typedef struct QEMUOptionRom {
> diff --git a/vl.c b/vl.c
> index 1329c30..fdd7b74 100644
> --- a/vl.c
> +++ b/vl.c
> @@ -28,6 +28,7 @@
> #include <errno.h>
> #include <sys/time.h>
> #include <zlib.h>
> +#include "bitmap.h"
>
> /* Needed early for CONFIG_BSD etc. */
> #include "config-host.h"
> @@ -240,7 +241,7 @@ QTAILQ_HEAD(, FWBootEntry) fw_boot_order = QTAILQ_HEAD_INITIALIZER(fw_boot_order
>
> int nb_numa_nodes;
> uint64_t node_mem[MAX_NODES];
> -uint64_t node_cpumask[MAX_NODES];
> +unsigned long *node_cpumask[MAX_NODES];
>
> uint8_t qemu_uuid[16];
>
> @@ -950,6 +951,9 @@ static void numa_add(const char *optarg)
> char *endptr;
> unsigned long long value, endvalue;
> int nodenr;
> + int i;
> +
> + value = endvalue = 0ULL;
>
> optarg = get_opt_name(option, 128, optarg, ',') + 1;
> if (!strcmp(option, "node")) {
> @@ -970,27 +974,25 @@ static void numa_add(const char *optarg)
> }
> node_mem[nodenr] = sval;
> }
> - if (get_param_value(option, 128, "cpus", optarg) == 0) {
> - node_cpumask[nodenr] = 0;
> - } else {
> + if (get_param_value(option, 128, "cpus", optarg) != 0) {
> value = strtoull(option, &endptr, 10);
> - if (value >= 64) {
> - value = 63;
> - fprintf(stderr, "only 64 CPUs in NUMA mode supported.\n");
> + if (*endptr == '-') {
> + endvalue = strtoull(endptr+1, &endptr, 10);
> } else {
> - if (*endptr == '-') {
> - endvalue = strtoull(endptr+1, &endptr, 10);
> - if (endvalue >= 63) {
> - endvalue = 62;
> - fprintf(stderr,
> - "only 63 CPUs in NUMA mode supported.\n");
> - }
> - value = (2ULL << endvalue) - (1ULL << value);
> - } else {
> - value = 1ULL << value;
> - }
> + endvalue = value;
> + }
> +
> +
> + if (!(endvalue < MAX_CPUMASK_BITS)) {
> + endvalue = MAX_CPUMASK_BITS - 1;
> + fprintf(stderr,
> + "A max of %d CPUs are supported in a guest\n",
> + MAX_CPUMASK_BITS);
> + }
> +
> + for (i = value; i <= endvalue; ++i) {
> + set_bit(i, node_cpumask[nodenr]);
> }
Nit: you could optimize this using bitmap_set(), but it's not a big
deal.
> - node_cpumask[nodenr] = value;
> }
> nb_numa_nodes++;
> }
> @@ -2331,7 +2333,8 @@ int main(int argc, char **argv, char **envp)
>
> for (i = 0; i < MAX_NODES; i++) {
> node_mem[i] = 0;
> - node_cpumask[i] = 0;
> + node_cpumask[i] = bitmap_new(MAX_CPUMASK_BITS);
> + bitmap_zero(node_cpumask[i], MAX_CPUMASK_BITS);
bitmap_new() already returns a zeroed bitmap, it seems.
> }
>
> nb_numa_nodes = 0;
> @@ -3469,8 +3472,9 @@ int main(int argc, char **argv, char **envp)
> }
>
> for (i = 0; i < nb_numa_nodes; i++) {
> - if (node_cpumask[i] != 0)
> + if (!bitmap_empty(node_cpumask[i], MAX_CPUMASK_BITS)) {
> break;
> + }
> }
> /* assigning the VCPUs round-robin is easier to implement, guest OSes
> * must cope with this anyway, because there are BIOSes out there in
> @@ -3478,7 +3482,7 @@ int main(int argc, char **argv, char **envp)
> */
> if (i == nb_numa_nodes) {
> for (i = 0; i < max_cpus; i++) {
> - node_cpumask[i % nb_numa_nodes] |= 1 << i;
> + set_bit(i, node_cpumask[i % nb_numa_nodes]);
> }
> }
> }
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
--
Eduardo
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-07-10 17:16 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-05 16:49 [PATCH v3] Fixes related to processing of qemu's -numa option Chegu Vinod
2012-07-05 16:49 ` [Qemu-devel] " Chegu Vinod
2012-07-10 17:16 ` Eduardo Habkost
2012-07-10 17:16 ` Eduardo Habkost
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.