From: Santosh Shilimkar <santosh.shilimkar@ti.com> To: tony@atomide.com Cc: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, Santosh Shilimkar <santosh.shilimkar@ti.com> Subject: [PATCH v2 00/14] ARM: OMAP5: Add minimal OMAP5 SOC support Date: Fri, 6 Jul 2012 14:51:41 +0530 [thread overview] Message-ID: <1341566515-22665-1-git-send-email-santosh.shilimkar@ti.com> (raw) Tony, Here is the updated series with suggested corrections and generated against the latest cleanup-part2 at commit ae6df418. The series adds minimal OMAP5 support. OMAP5430 has a dual core Cortex-A15 based MPU subsystem with 2MB L2 cache. The SOC has many compatible blocks with OMAP4 SOCS and hence large part of the peripherals are re-used. OMAP5432 is another variant of OMAP5430, with a memory controller supporting DDR3 and SATA. BOOT tested: - OMAP4430 SDP - OMAP3430 SDP - OMAP3430 SDP - OMAP5430 EVM with OMAP5 hwmod/PRM?CM data files. Build testd: - OMAP1 only build, OMAP[2/3/4/5] Only builds. I observed one build break for OMAP4 only build on cleanup-part2 at commit ae6df418. Will post a fix for it in a separate patch. The following changes since commit ae6df418a21f3a361c5f9b878e32a8aba4e17692: ARM: OMAP2+: dmtimer: cleanup fclk usage (2012-07-06 01:13:52 -0700) are available in the git repository at: git://github.com/SantoshShilimkar/linux.git for_3.6/omap5_minimal_support for you to fetch changes up to 37f25749505963d0dce52dfacd6b085de2a8dbeb: ARM: Kconfig update to support additional GPIOs in OMAP5 (2012-07-06 14:18:35 +0530) ---------------------------------------------------------------- R Sricharan (11): ARM: OMAP2+: Move stubbed secure_sram_reserve function to a common.c and call it __weak ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme. ARM: OMAP5: id: Add cpu id for ES versions ARM: OMAP5: Add minimal support for OMAP5430 SOC ARM: OMAP5: timer: Add clocksource, clockevent support ARM: OMAP5: gpmc: Update gpmc_init() ARM: OMAP5: l3: Add l3 error handler support for omap5. ARM: omap2+: board-generic: clean up the irq data from board file. ARM: OMAP5: board-generic: Add device tree support. arm/dts: OMAP5: Add omap5 dts files ARM: OMAP5: Add the build support Santosh Shilimkar (2): ARM: OMAP5: Add the WakeupGen IP updates ARM: OMAP5: Add SMP support. Tarun Kanti DebBarma (1): ARM: Kconfig update to support additional GPIOs in OMAP5 .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/Kconfig | 1 + arch/arm/boot/dts/omap5-evm.dts | 20 +++ arch/arm/boot/dts/omap5.dtsi | 184 ++++++++++++++++++++ arch/arm/configs/omap2plus_defconfig | 1 + arch/arm/mach-omap2/Kconfig | 8 +- arch/arm/mach-omap2/Makefile | 24 ++- arch/arm/mach-omap2/board-generic.c | 42 +++-- arch/arm/mach-omap2/common.c | 24 +++ arch/arm/mach-omap2/common.h | 19 +- arch/arm/mach-omap2/control.h | 4 + arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/gpmc.c | 3 +- arch/arm/mach-omap2/id.c | 42 ++++- arch/arm/mach-omap2/include/mach/debug-macro.S | 8 +- arch/arm/mach-omap2/include/mach/omap-wakeupgen.h | 7 + arch/arm/mach-omap2/io.c | 44 +++++ arch/arm/mach-omap2/iomap.h | 27 +++ arch/arm/mach-omap2/irq.c | 13 +- arch/arm/mach-omap2/omap-headsmp.S | 21 +++ arch/arm/mach-omap2/omap-hotplug.c | 24 ++- arch/arm/mach-omap2/omap-smp.c | 52 ++++-- arch/arm/mach-omap2/omap-wakeupgen.c | 114 +++++++++--- arch/arm/mach-omap2/omap4-common.c | 14 ++ arch/arm/mach-omap2/omap4-sar-layout.h | 12 +- arch/arm/mach-omap2/omap_hwmod.c | 2 +- arch/arm/mach-omap2/omap_l3_noc.h | 22 ++- arch/arm/mach-omap2/prcm-common.h | 2 +- arch/arm/mach-omap2/prcm.c | 2 +- arch/arm/mach-omap2/timer.c | 5 + arch/arm/plat-omap/Kconfig | 4 +- arch/arm/plat-omap/common.c | 9 + arch/arm/plat-omap/counter_32k.c | 16 +- arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 + arch/arm/plat-omap/include/plat/clock.h | 1 + arch/arm/plat-omap/include/plat/cpu.h | 22 ++- arch/arm/plat-omap/include/plat/hardware.h | 1 + arch/arm/plat-omap/include/plat/multi.h | 9 + arch/arm/plat-omap/include/plat/omap-secure.h | 5 - arch/arm/plat-omap/include/plat/omap54xx.h | 32 ++++ arch/arm/plat-omap/include/plat/serial.h | 10 ++ arch/arm/plat-omap/include/plat/uncompress.h | 6 + arch/arm/plat-omap/sram.c | 11 +- 43 files changed, 775 insertions(+), 98 deletions(-) create mode 100644 arch/arm/boot/dts/omap5-evm.dts create mode 100644 arch/arm/boot/dts/omap5.dtsi create mode 100644 arch/arm/plat-omap/include/plat/omap54xx.h -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: santosh.shilimkar@ti.com (Santosh Shilimkar) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 00/14] ARM: OMAP5: Add minimal OMAP5 SOC support Date: Fri, 6 Jul 2012 14:51:41 +0530 [thread overview] Message-ID: <1341566515-22665-1-git-send-email-santosh.shilimkar@ti.com> (raw) Tony, Here is the updated series with suggested corrections and generated against the latest cleanup-part2 at commit ae6df418. The series adds minimal OMAP5 support. OMAP5430 has a dual core Cortex-A15 based MPU subsystem with 2MB L2 cache. The SOC has many compatible blocks with OMAP4 SOCS and hence large part of the peripherals are re-used. OMAP5432 is another variant of OMAP5430, with a memory controller supporting DDR3 and SATA. BOOT tested: - OMAP4430 SDP - OMAP3430 SDP - OMAP3430 SDP - OMAP5430 EVM with OMAP5 hwmod/PRM?CM data files. Build testd: - OMAP1 only build, OMAP[2/3/4/5] Only builds. I observed one build break for OMAP4 only build on cleanup-part2 at commit ae6df418. Will post a fix for it in a separate patch. The following changes since commit ae6df418a21f3a361c5f9b878e32a8aba4e17692: ARM: OMAP2+: dmtimer: cleanup fclk usage (2012-07-06 01:13:52 -0700) are available in the git repository at: git://github.com/SantoshShilimkar/linux.git for_3.6/omap5_minimal_support for you to fetch changes up to 37f25749505963d0dce52dfacd6b085de2a8dbeb: ARM: Kconfig update to support additional GPIOs in OMAP5 (2012-07-06 14:18:35 +0530) ---------------------------------------------------------------- R Sricharan (11): ARM: OMAP2+: Move stubbed secure_sram_reserve function to a common.c and call it __weak ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme. ARM: OMAP5: id: Add cpu id for ES versions ARM: OMAP5: Add minimal support for OMAP5430 SOC ARM: OMAP5: timer: Add clocksource, clockevent support ARM: OMAP5: gpmc: Update gpmc_init() ARM: OMAP5: l3: Add l3 error handler support for omap5. ARM: omap2+: board-generic: clean up the irq data from board file. ARM: OMAP5: board-generic: Add device tree support. arm/dts: OMAP5: Add omap5 dts files ARM: OMAP5: Add the build support Santosh Shilimkar (2): ARM: OMAP5: Add the WakeupGen IP updates ARM: OMAP5: Add SMP support. Tarun Kanti DebBarma (1): ARM: Kconfig update to support additional GPIOs in OMAP5 .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/Kconfig | 1 + arch/arm/boot/dts/omap5-evm.dts | 20 +++ arch/arm/boot/dts/omap5.dtsi | 184 ++++++++++++++++++++ arch/arm/configs/omap2plus_defconfig | 1 + arch/arm/mach-omap2/Kconfig | 8 +- arch/arm/mach-omap2/Makefile | 24 ++- arch/arm/mach-omap2/board-generic.c | 42 +++-- arch/arm/mach-omap2/common.c | 24 +++ arch/arm/mach-omap2/common.h | 19 +- arch/arm/mach-omap2/control.h | 4 + arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/gpmc.c | 3 +- arch/arm/mach-omap2/id.c | 42 ++++- arch/arm/mach-omap2/include/mach/debug-macro.S | 8 +- arch/arm/mach-omap2/include/mach/omap-wakeupgen.h | 7 + arch/arm/mach-omap2/io.c | 44 +++++ arch/arm/mach-omap2/iomap.h | 27 +++ arch/arm/mach-omap2/irq.c | 13 +- arch/arm/mach-omap2/omap-headsmp.S | 21 +++ arch/arm/mach-omap2/omap-hotplug.c | 24 ++- arch/arm/mach-omap2/omap-smp.c | 52 ++++-- arch/arm/mach-omap2/omap-wakeupgen.c | 114 +++++++++--- arch/arm/mach-omap2/omap4-common.c | 14 ++ arch/arm/mach-omap2/omap4-sar-layout.h | 12 +- arch/arm/mach-omap2/omap_hwmod.c | 2 +- arch/arm/mach-omap2/omap_l3_noc.h | 22 ++- arch/arm/mach-omap2/prcm-common.h | 2 +- arch/arm/mach-omap2/prcm.c | 2 +- arch/arm/mach-omap2/timer.c | 5 + arch/arm/plat-omap/Kconfig | 4 +- arch/arm/plat-omap/common.c | 9 + arch/arm/plat-omap/counter_32k.c | 16 +- arch/arm/plat-omap/include/plat/clkdev_omap.h | 1 + arch/arm/plat-omap/include/plat/clock.h | 1 + arch/arm/plat-omap/include/plat/cpu.h | 22 ++- arch/arm/plat-omap/include/plat/hardware.h | 1 + arch/arm/plat-omap/include/plat/multi.h | 9 + arch/arm/plat-omap/include/plat/omap-secure.h | 5 - arch/arm/plat-omap/include/plat/omap54xx.h | 32 ++++ arch/arm/plat-omap/include/plat/serial.h | 10 ++ arch/arm/plat-omap/include/plat/uncompress.h | 6 + arch/arm/plat-omap/sram.c | 11 +- 43 files changed, 775 insertions(+), 98 deletions(-) create mode 100644 arch/arm/boot/dts/omap5-evm.dts create mode 100644 arch/arm/boot/dts/omap5.dtsi create mode 100644 arch/arm/plat-omap/include/plat/omap54xx.h -- 1.7.9.5
next reply other threads:[~2012-07-06 9:23 UTC|newest] Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-07-06 9:21 Santosh Shilimkar [this message] 2012-07-06 9:21 ` [PATCH v2 00/14] ARM: OMAP5: Add minimal OMAP5 SOC support Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 01/14] ARM: OMAP2+: Move stubbed secure_sram_reserve function to a common.c and call it __weak Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 02/14] ARM: OMAP: counter-32k: Select the CR register offset using the IP scheme Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-09 8:50 ` Vaibhav Hiremath 2012-07-09 8:50 ` Vaibhav Hiremath 2012-07-09 10:42 ` Shilimkar, Santosh 2012-07-09 10:42 ` Shilimkar, Santosh 2012-07-10 6:41 ` Hiremath, Vaibhav 2012-07-10 6:41 ` Hiremath, Vaibhav 2012-07-10 7:12 ` Shilimkar, Santosh 2012-07-10 7:12 ` Shilimkar, Santosh 2012-07-10 7:25 ` Hiremath, Vaibhav 2012-07-10 7:25 ` Hiremath, Vaibhav 2012-07-09 16:47 ` Kevin Hilman 2012-07-09 16:47 ` Kevin Hilman 2012-07-09 23:21 ` Jon Hunter 2012-07-09 23:21 ` Jon Hunter 2012-07-10 5:50 ` Shilimkar, Santosh 2012-07-10 5:50 ` Shilimkar, Santosh 2012-07-09 23:52 ` Jon Hunter 2012-07-09 23:52 ` Jon Hunter 2012-07-06 9:21 ` [PATCH v2 03/14] ARM: OMAP5: id: Add cpu id for ES versions Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-11-02 10:03 ` Roger Quadros 2012-11-02 10:03 ` Roger Quadros 2012-11-06 18:18 ` Tony Lindgren 2012-11-06 18:18 ` Tony Lindgren 2012-07-06 9:21 ` [PATCH v2 04/14] ARM: OMAP5: Add minimal support for OMAP5430 SOC Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-09 8:50 ` Vaibhav Hiremath 2012-07-09 8:50 ` Vaibhav Hiremath 2012-07-09 10:39 ` Shilimkar, Santosh 2012-07-09 10:39 ` Shilimkar, Santosh 2012-07-10 5:57 ` Hiremath, Vaibhav 2012-07-10 5:57 ` Hiremath, Vaibhav 2012-07-10 6:06 ` Shilimkar, Santosh 2012-07-10 6:06 ` Shilimkar, Santosh 2012-07-10 6:11 ` Hiremath, Vaibhav 2012-07-10 6:11 ` Hiremath, Vaibhav 2012-07-09 13:11 ` Tony Lindgren 2012-07-09 13:11 ` Tony Lindgren 2012-07-09 13:25 ` Tony Lindgren 2012-07-09 13:25 ` Tony Lindgren 2012-07-09 13:26 ` Shilimkar, Santosh 2012-07-09 13:26 ` Shilimkar, Santosh 2012-07-09 14:26 ` Shilimkar, Santosh 2012-07-09 14:26 ` Shilimkar, Santosh 2012-07-10 6:25 ` Hiremath, Vaibhav 2012-07-10 6:25 ` Hiremath, Vaibhav 2012-07-10 8:18 ` Tony Lindgren 2012-07-10 8:18 ` Tony Lindgren 2012-07-10 8:30 ` Hiremath, Vaibhav 2012-07-10 8:30 ` Hiremath, Vaibhav 2012-07-10 8:37 ` Tony Lindgren 2012-07-10 8:37 ` Tony Lindgren 2012-08-15 22:26 ` Paul Walmsley 2012-08-15 22:26 ` Paul Walmsley 2012-08-16 8:39 ` Tony Lindgren 2012-08-16 8:39 ` Tony Lindgren 2012-08-16 9:36 ` Hiremath, Vaibhav 2012-08-16 9:36 ` Hiremath, Vaibhav 2012-07-06 9:21 ` [PATCH v2 05/14] ARM: OMAP5: timer: Add clocksource, clockevent support Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 06/14] ARM: OMAP5: gpmc: Update gpmc_init() Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 07/14] ARM: OMAP5: l3: Add l3 error handler support for omap5 Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 08/14] ARM: OMAP5: Add the WakeupGen IP updates Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 09/14] ARM: OMAP5: Add SMP support Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 10/14] ARM: omap2+: board-generic: clean up the irq data from board file Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 11/14] ARM: OMAP5: board-generic: Add device tree support Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 12/14] arm/dts: OMAP5: Add omap5 dts files Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 13/14] ARM: OMAP5: Add the build support Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 9:21 ` [PATCH v2 14/14] ARM: Kconfig update to support additional GPIOs in OMAP5 Santosh Shilimkar 2012-07-06 9:21 ` Santosh Shilimkar 2012-07-06 12:36 ` [PATCH v2 00/14] ARM: OMAP5: Add minimal OMAP5 SOC support Tony Lindgren 2012-07-06 12:36 ` Tony Lindgren 2012-07-06 12:47 ` Shilimkar, Santosh 2012-07-06 12:47 ` Shilimkar, Santosh
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1341566515-22665-1-git-send-email-santosh.shilimkar@ti.com \ --to=santosh.shilimkar@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.