* Linux 3.2: After resume screen only turned on after switching terminals
@ 2012-06-25 19:14 Paul Menzel
2012-06-26 5:42 ` Michel Dänzer
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2012-06-25 19:14 UTC (permalink / raw)
To: dri-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 826 bytes --]
Dear Linux folks,
resuming from suspend to RAM the monitor was indicating by a blinking
LED that it did not receive any signal. This is the first time this
happened. Resuming from suspend to RAM had worked without problems
before (and probably will work again the next tries).
Logging in from SSH worked fine though. Switching terminal to tty1
nothing changed but going back to tty7, where X was supposed to run),
and the monitor detected a signal and showed the screensaver.
Switching to tty1 still does not work though, that means the monitor
indicates that it gets no signal.
The motherboard is an ASRock A780FullHD [1] and the OS is Debian
Sid/unstable.
I attach the output of `dmesg` and `/var/log/Xorg.0.log`.
Thanks,
Paul
[1] http://www.asrock.com/mb/overview.asp?model=a780fullhd
[-- Attachment #1.1.2: 20120625.dmesg --]
[-- Type: text/plain, Size: 89917 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 18:27:04 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfeb0000 - 00000000cfec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfec0000 - 00000000cfef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A780FullHD, BIOS P1.00 08/01/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 368ee000 - 3746f000
[ 0.000000] ACPI: RSDP 000fa160 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT cfeb0000 00038 (v01 080108 RSDT2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: FACP cfeb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT cfeb0440 07737 (v01 AS146 AS146012 00000012 INTL 20051117)
[ 0.000000] ACPI: FACS cfec0000 00040
[ 0.000000] ACPI: APIC cfeb0390 0006C (v01 080108 APIC2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: MCFG cfeb0400 0003C (v01 080108 OEMMCFG 20080801 MSFT 00000097)
[ 0.000000] ACPI: OEMB cfec0040 00071 (v01 080108 OEMB2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: SSDT cfeb7b80 0028A (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3718MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 982591
[ 0.000000] free_area_init_node: node 0, pgdat c1411d80, node_mem_map f44ee200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7437 pages used for memmap
[ 0.000000] HighMem zone: 747429 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s33024 r0 d24320 u57344
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 973374
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=/dev/mapper/speicher-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00120000)
[ 0.000000] Memory: 3875392k/4718592k available (2845k kernel code, 54972k reserved, 1352k data, 416k init, 3019464k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141a000 - 0xc1482000 ( 416 kB)
[ 0.000000] .data : 0xc12c75ec - 0xc1419640 (1352 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c75ec (2845 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4006000 soft=f4008000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2494.400 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.80 BogoMIPS (lpj=9977600)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004059] Security Framework initialized
[ 0.004067] AppArmor: AppArmor disabled by boot time parameter
[ 0.004086] Mount-cache hash table entries: 512
[ 0.004236] Initializing cgroup subsys cpuacct
[ 0.004242] Initializing cgroup subsys memory
[ 0.004252] Initializing cgroup subsys devices
[ 0.004254] Initializing cgroup subsys freezer
[ 0.004257] Initializing cgroup subsys net_cls
[ 0.004260] Initializing cgroup subsys blkio
[ 0.004267] Initializing cgroup subsys perf_event
[ 0.004298] CPU: Physical Processor ID: 0
[ 0.004300] CPU: Processor Core ID: 0
[ 0.004303] mce: CPU supports 5 MCE banks
[ 0.004315] using AMD E400 aware idle routine
[ 0.008252] ACPI: Core revision 20110623
[ 0.011297] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.011675] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051363] CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
[ 0.052002] Performance Events: AMD PMU driver.
[ 0.052002] ... version: 0
[ 0.052002] ... bit width: 48
[ 0.052002] ... generic registers: 4
[ 0.052002] ... value mask: 0000ffffffffffff
[ 0.052002] ... max period: 00007fffffffffff
[ 0.052002] ... fixed-purpose events: 0
[ 0.052002] ... event mask: 000000000000000f
[ 0.052002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.052002] CPU 1 irqstacks, hard=f4094000 soft=f4096000
[ 0.052002] Booting Node 0, Processors #1
[ 0.052002] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.136134] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136156] Brought up 2 CPUs
[ 0.136159] Total of 2 processors activated (9978.31 BogoMIPS).
[ 0.136820] devtmpfs: initialized
[ 0.136820] PM: Registering ACPI NVS region at cfec0000 (196608 bytes)
[ 0.136820] print_constraints: dummy:
[ 0.136820] NET: Registered protocol family 16
[ 0.136820] node 0 link 0: io port [1000, ffffff]
[ 0.136820] TOM: 00000000d0000000 aka 3328M
[ 0.136820] node 0 link 0: mmio [a0000, bffff]
[ 0.136820] node 0 link 0: mmio [d0000000, efffffff]
[ 0.136820] node 0 link 0: mmio [f0000000, fddfffff]
[ 0.136820] node 0 link 0: mmio [fde00000, fdefffff]
[ 0.136820] node 0 link 0: mmio [fdf00000, ffefffff]
[ 0.136820] TOM2: 0000000130000000 aka 4864M
[ 0.136820] bus: [00, 07] on node 0 link 0
[ 0.136820] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.136820] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.136820] bus: 00 index 2 [mem 0xd0000000-0xffffffff]
[ 0.136820] bus: 00 index 3 [mem 0x130000000-0xfcffffffff]
[ 0.136820] ACPI: bus type pci registered
[ 0.136820] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.136820] PCI: not using MMCONFIG
[ 0.137225] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.137302] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.137303] PCI: Using configuration type 1 for base access
[ 0.137886] bio: create slab <bio-0> at 0
[ 0.137886] ACPI: Added _OSI(Module Device)
[ 0.137886] ACPI: Added _OSI(Processor Device)
[ 0.137886] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137886] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.140054] ACPI: EC: Look up EC in DSDT
[ 0.141069] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.156286] ACPI: Interpreter enabled
[ 0.156294] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.156318] ACPI: Using IOAPIC for interrupt routing
[ 0.156340] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.157113] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.157115] PCI: Using MMCONFIG for extended config space
[ 0.161913] ACPI: No dock devices found.
[ 0.161915] HEST: Table not found.
[ 0.161921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.162120] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.162312] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.162314] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.162317] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.162320] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.162322] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 0.162325] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.162331] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d09ff])
[ 0.162352] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.162415] pci 0000:00:01.0: [1849:9602] type 1 class 0x000604
[ 0.162465] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.162508] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.162511] pci 0000:00:09.0: PME# disabled
[ 0.162528] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.162568] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.162571] pci 0000:00:0a.0: PME# disabled
[ 0.162602] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.162623] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.162634] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.162645] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.162656] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.162667] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.162678] pci 0000:00:11.0: reg 24: [mem 0xfddff800-0xfddffbff]
[ 0.162742] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.162757] pci 0000:00:12.0: reg 10: [mem 0xfddfe000-0xfddfefff]
[ 0.162830] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.162845] pci 0000:00:12.1: reg 10: [mem 0xfddfd000-0xfddfdfff]
[ 0.162923] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.162944] pci 0000:00:12.2: reg 10: [mem 0xfddff000-0xfddff0ff]
[ 0.163034] pci 0000:00:12.2: supports D1 D2
[ 0.163037] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.163042] pci 0000:00:12.2: PME# disabled
[ 0.163067] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.163082] pci 0000:00:13.0: reg 10: [mem 0xfddfc000-0xfddfcfff]
[ 0.163154] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.163169] pci 0000:00:13.1: reg 10: [mem 0xfddf7000-0xfddf7fff]
[ 0.163248] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.163269] pci 0000:00:13.2: reg 10: [mem 0xfddf6800-0xfddf68ff]
[ 0.163359] pci 0000:00:13.2: supports D1 D2
[ 0.163361] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.163365] pci 0000:00:13.2: PME# disabled
[ 0.163393] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.163504] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.163522] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.163533] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.163543] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.163554] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.163564] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.163630] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.163654] pci 0000:00:14.2: reg 10: [mem 0xfddf0000-0xfddf3fff 64bit]
[ 0.163726] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.163731] pci 0000:00:14.2: PME# disabled
[ 0.163747] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.163831] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.163880] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.163895] pci 0000:00:14.5: reg 10: [mem 0xfddf5000-0xfddf5fff]
[ 0.163970] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.163991] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.164017] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.164034] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.164087] pci 0000:01:05.0: [1002:9610] type 0 class 0x000300
[ 0.164097] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.164103] pci 0000:01:05.0: reg 14: [io 0xc000-0xc0ff]
[ 0.164108] pci 0000:01:05.0: reg 18: [mem 0xfdff0000-0xfdffffff]
[ 0.164119] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
[ 0.164139] pci 0000:01:05.0: supports D1 D2
[ 0.164182] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.164186] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.164190] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.164194] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.164222] pci 0000:00:09.0: PCI bridge to [bus 02-03]
[ 0.164226] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.164230] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfeafffff]
[ 0.164234] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.164277] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.164291] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.164313] pci 0000:04:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit pref]
[ 0.164328] pci 0000:04:00.0: reg 20: [mem 0xfcfe0000-0xfcfeffff 64bit pref]
[ 0.164338] pci 0000:04:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
[ 0.164388] pci 0000:04:00.0: supports D1 D2
[ 0.164390] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.164395] pci 0000:04:00.0: PME# disabled
[ 0.172025] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[ 0.172029] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.172033] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.172037] pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.172102] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.172113] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.172115] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.172118] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.172121] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.172124] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.172138] pci_bus 0000:00: on NUMA node 0
[ 0.172141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.172397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.172447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.172492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.172565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.172711] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.173027] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.178162] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.178205] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.178245] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.178286] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.178325] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.178365] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.178406] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.178446] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.178561] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.178561] vgaarb: loaded
[ 0.178561] vgaarb: bridge control possible 0000:01:05.0
[ 0.178561] PCI: Using ACPI for IRQ routing
[ 0.178561] PCI: pci_cache_line_size set to 64 bytes
[ 0.178561] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.178561] reserve RAM buffer: 00000000cfeb0000 - 00000000cfffffff
[ 0.180669] pnp: PnP ACPI init
[ 0.180694] ACPI: bus type pnp registered
[ 0.180848] pnp 00:00: [bus 00-ff]
[ 0.180851] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.180853] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.180856] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.180858] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.180861] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.180864] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[ 0.180866] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.180937] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.181028] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.181031] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.181102] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181150] pnp 00:02: [dma 4]
[ 0.181152] pnp 00:02: [io 0x0000-0x000f]
[ 0.181154] pnp 00:02: [io 0x0081-0x0083]
[ 0.181156] pnp 00:02: [io 0x0087]
[ 0.181158] pnp 00:02: [io 0x0089-0x008b]
[ 0.181160] pnp 00:02: [io 0x008f]
[ 0.181162] pnp 00:02: [io 0x00c0-0x00df]
[ 0.181193] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.181204] pnp 00:03: [io 0x0070-0x0071]
[ 0.181220] pnp 00:03: [irq 8]
[ 0.181251] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.181259] pnp 00:04: [io 0x0061]
[ 0.181288] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.181296] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.181301] pnp 00:05: [irq 13]
[ 0.181331] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.181560] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.181594] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.181635] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.181638] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.181690] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.181693] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.181696] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.181792] pnp 00:08: [io 0x0010-0x001f]
[ 0.181795] pnp 00:08: [io 0x0022-0x003f]
[ 0.181797] pnp 00:08: [io 0x0062-0x0063]
[ 0.181799] pnp 00:08: [io 0x0065-0x006f]
[ 0.181801] pnp 00:08: [io 0x0072-0x007f]
[ 0.181803] pnp 00:08: [io 0x0080]
[ 0.181805] pnp 00:08: [io 0x0084-0x0086]
[ 0.181807] pnp 00:08: [io 0x0088]
[ 0.181809] pnp 00:08: [io 0x008c-0x008e]
[ 0.181811] pnp 00:08: [io 0x0090-0x009f]
[ 0.181813] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.181815] pnp 00:08: [io 0x00b1]
[ 0.181817] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.181820] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.181822] pnp 00:08: [io 0x040b]
[ 0.181824] pnp 00:08: [io 0x04d6]
[ 0.181826] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.181828] pnp 00:08: [io 0x0c14]
[ 0.181830] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.181832] pnp 00:08: [io 0x0c52]
[ 0.181834] pnp 00:08: [io 0x0c6c]
[ 0.181836] pnp 00:08: [io 0x0c6f]
[ 0.181839] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.181842] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.181844] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.181846] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.181848] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.181850] pnp 00:08: [io 0x0800-0x089f]
[ 0.181852] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.181855] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.181857] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.181859] pnp 00:08: [io 0x0900-0x090f]
[ 0.181861] pnp 00:08: [io 0x0910-0x091f]
[ 0.181863] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.181865] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.181868] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.181956] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.181959] system 00:08: [io 0x040b] has been reserved
[ 0.181962] system 00:08: [io 0x04d6] has been reserved
[ 0.181965] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.181968] system 00:08: [io 0x0c14] has been reserved
[ 0.181971] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.181974] system 00:08: [io 0x0c52] has been reserved
[ 0.181977] system 00:08: [io 0x0c6c] has been reserved
[ 0.181979] system 00:08: [io 0x0c6f] has been reserved
[ 0.181982] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.181985] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.181988] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.181992] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.181995] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.181997] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.182000] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.182003] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.182006] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.182009] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.182012] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.182016] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.182019] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.182022] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182205] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.182208] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.182210] pnp 00:09: [io 0x0290-0x029f]
[ 0.182260] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.182263] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182294] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.182343] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.182346] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.182486] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.182489] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.182491] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.182493] pnp 00:0b: [mem 0x00100000-0xcfefffff]
[ 0.182496] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.182549] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.182552] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.182555] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.182558] system 00:0b: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.182561] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.182564] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.182665] pnp: PnP ACPI: found 12 devices
[ 0.182667] ACPI: ACPI bus type pnp unregistered
[ 0.182670] PnPBIOS: Disabled by ACPI PNP
[ 0.219626] Switching to clocksource acpi_pm
[ 0.219654] PCI: max bus depth: 1 pci_try_num: 2
[ 0.219679] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.219682] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.219686] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.219689] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.219694] pci 0000:00:09.0: PCI bridge to [bus 02-03]
[ 0.219697] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.219700] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfeafffff]
[ 0.219704] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.219708] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[ 0.219711] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.219715] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.219718] pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.219723] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 0.219756] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.219759] pci 0000:00:09.0: setting latency timer to 64
[ 0.219768] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.219771] pci 0000:00:0a.0: setting latency timer to 64
[ 0.219779] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.219782] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.219784] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.219787] pci_bus 0000:00: resource 7 [mem 0xcff00000-0xdfffffff]
[ 0.219789] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.219792] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.219795] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
[ 0.219798] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.219801] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.219803] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfeafffff]
[ 0.219805] pci_bus 0000:02: resource 2 [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.219808] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.219811] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.219813] pci_bus 0000:04: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.219816] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.219819] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.219821] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.219823] pci_bus 0000:05: resource 7 [mem 0xcff00000-0xdfffffff]
[ 0.219826] pci_bus 0000:05: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.219908] NET: Registered protocol family 2
[ 0.219998] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.219998] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.219998] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.219998] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.219998] TCP reno registered
[ 0.219998] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219998] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.219998] NET: Registered protocol family 1
[ 0.219998] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.219998] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.320030] pci 0000:00:12.0: PCI INT A disabled
[ 0.320040] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.400026] pci 0000:00:12.1: PCI INT A disabled
[ 0.400035] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.400051] pci 0000:00:12.2: PCI INT B disabled
[ 0.400058] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.480027] pci 0000:00:13.0: PCI INT A disabled
[ 0.480035] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.552026] pci 0000:00:13.1: PCI INT A disabled
[ 0.552039] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.552055] pci 0000:00:13.2: PCI INT B disabled
[ 0.552076] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.624026] pci 0000:00:14.5: PCI INT C disabled
[ 0.624039] pci 0000:01:05.0: Boot video device
[ 0.624045] PCI: CLS 64 bytes, default 64
[ 0.624119] Unpacking initramfs...
[ 0.932916] Freeing initrd memory: 11780k freed
[ 0.943853] audit: initializing netlink socket (disabled)
[ 0.943878] type=2000 audit(1340629377.940:1): initialized
[ 0.969353] highmem bounce pool size: 64 pages
[ 0.969358] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.991983] VFS: Disk quotas dquot_6.5.2
[ 0.992036] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.992112] msgmni has been set to 1694
[ 0.992337] alg: No test for stdrng (krng)
[ 0.992385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.992390] io scheduler noop registered
[ 0.992392] io scheduler deadline registered
[ 0.992411] io scheduler cfq registered (default)
[ 0.992520] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.992557] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.992613] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.992638] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.992713] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.992744] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.992746] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.992921] acpiphp: Slot [1] registered
[ 0.993047] ERST: Table is not found!
[ 0.993048] GHES: HEST is not enabled!
[ 0.993061] isapnp: Scanning for PnP cards...
[ 1.346837] isapnp: No Plug & Play device found
[ 1.346929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.352359] hpet_acpi_add: no address or irqs in _CRS
[ 1.352372] Linux agpgart interface v0.103
[ 1.352764] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.355496] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.355503] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.355608] mousedev: PS/2 mouse device common for all mice
[ 1.355663] rtc_cmos 00:03: RTC can wake from S4
[ 1.355789] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.355818] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.355833] cpuidle: using governor ladder
[ 1.355835] cpuidle: using governor menu
[ 1.356082] TCP cubic registered
[ 1.356137] NET: Registered protocol family 10
[ 1.356685] Mobile IPv6
[ 1.356687] NET: Registered protocol family 17
[ 1.356691] Registering the dns_resolver key type
[ 1.356716] Using IPI No-Shortcut mode
[ 1.356867] PM: Hibernation image not present or could not be loaded.
[ 1.356882] registered taskstats version 1
[ 1.368202] rtc_cmos 00:03: setting system clock to 2012-06-25 13:02:59 UTC (1340629379)
[ 1.368253] Initializing network drop monitor service
[ 1.368379] Freeing unused kernel memory: 416k freed
[ 1.368675] Write protecting the kernel text: 2848k
[ 1.368708] Write protecting the kernel read-only data: 1092k
[ 1.368710] NX-protecting the kernel data: 3296k
[ 1.439112] udevd[52]: starting version 175
[ 1.495587] usbcore: registered new interface driver usbfs
[ 1.495618] usbcore: registered new interface driver hub
[ 1.501688] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.501713] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.501742] r8169 0000:04:00.0: setting latency timer to 64
[ 1.501789] r8169 0000:04:00.0: irq 42 for MSI/MSI-X
[ 1.502309] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf820a000, 00:19:66:8b:09:1a, XID 1c4000c0 IRQ 42
[ 1.502312] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.503389] SCSI subsystem initialized
[ 1.517565] usbcore: registered new device driver usb
[ 1.518119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.518151] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.518177] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.518208] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.518220] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.518250] QUIRK: Enable AMD PLL fix
[ 1.518253] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.518268] ehci_hcd 0000:00:12.2: debug port 1
[ 1.518297] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 1.518722] libata version 3.00 loaded.
[ 1.528085] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.528156] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.528159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.528162] usb usb1: Product: EHCI Host Controller
[ 1.528164] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.528166] usb usb1: SerialNumber: 0000:00:12.2
[ 1.529851] hub 1-0:1.0: USB hub found
[ 1.529862] hub 1-0:1.0: 6 ports detected
[ 1.529990] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.530019] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.530032] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.530043] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.530070] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.530085] ehci_hcd 0000:00:13.2: debug port 1
[ 1.530120] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 1.532510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.540076] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.540114] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.540117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.540120] usb usb2: Product: EHCI Host Controller
[ 1.540122] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.540124] usb usb2: SerialNumber: 0000:00:13.2
[ 1.541144] hub 2-0:1.0: USB hub found
[ 1.541151] hub 2-0:1.0: 6 ports detected
[ 1.541634] ahci 0000:00:11.0: version 3.0
[ 1.541668] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.541871] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.541875] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.551328] scsi0 : ahci
[ 1.557479] scsi1 : ahci
[ 1.557610] scsi2 : ahci
[ 1.559293] scsi3 : ahci
[ 1.559418] scsi4 : ahci
[ 1.559491] scsi5 : ahci
[ 1.559559] ata1: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff900 irq 22
[ 1.559563] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22
[ 1.559567] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22
[ 1.559571] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22
[ 1.559574] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq 22
[ 1.559578] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq 22
[ 1.559659] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.559689] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.559706] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.559747] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfddfe000
[ 1.616059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.616064] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.616067] usb usb3: Product: OHCI Host Controller
[ 1.616070] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.616072] usb usb3: SerialNumber: 0000:00:12.0
[ 1.616244] hub 3-0:1.0: USB hub found
[ 1.616252] hub 3-0:1.0: 3 ports detected
[ 1.616584] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.616612] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.616624] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.616648] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfddfd000
[ 1.676036] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.676039] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.676041] usb usb4: Product: OHCI Host Controller
[ 1.676043] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.676046] usb usb4: SerialNumber: 0000:00:12.1
[ 1.676200] hub 4-0:1.0: USB hub found
[ 1.676207] hub 4-0:1.0: 3 ports detected
[ 1.676927] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.676980] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.677390] scsi6 : pata_atiixp
[ 1.677464] scsi7 : pata_atiixp
[ 1.678159] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.678162] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.678218] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.678244] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.678261] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.678299] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfddfc000
[ 1.736044] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.736047] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.736050] usb usb5: Product: OHCI Host Controller
[ 1.736052] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.736054] usb usb5: SerialNumber: 0000:00:13.0
[ 1.736211] hub 5-0:1.0: USB hub found
[ 1.736219] hub 5-0:1.0: 3 ports detected
[ 1.736289] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.736303] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.736310] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.736331] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfddf7000
[ 1.796060] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.796063] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.796065] usb usb6: Product: OHCI Host Controller
[ 1.796067] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.796069] usb usb6: SerialNumber: 0000:00:13.1
[ 1.796198] hub 6-0:1.0: USB hub found
[ 1.796204] hub 6-0:1.0: 3 ports detected
[ 1.796541] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.796556] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.796565] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.796585] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfddf5000
[ 1.848580] ata8.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
[ 1.848588] ata8.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33
[ 1.856053] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.856056] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.856059] usb usb7: Product: OHCI Host Controller
[ 1.856061] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae ohci_hcd
[ 1.856063] usb usb7: SerialNumber: 0000:00:14.5
[ 1.856259] hub 7-0:1.0: USB hub found
[ 1.856266] hub 7-0:1.0: 2 ports detected
[ 1.864549] ata8.00: configured for UDMA/33
[ 1.876045] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.876085] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.876123] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.876176] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.876211] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.880433] ata8.01: configured for UDMA/33
[ 2.048027] ata1: softreset failed (device not ready)
[ 2.048072] ata1: applying PMP SRST workaround and retrying
[ 2.216022] usb 3-2: new low-speed USB device number 2 using ohci_hcd
[ 2.220034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.226146] ata1.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100
[ 2.226149] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.232196] ata1.00: configured for UDMA/100
[ 2.232324] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-60M 51.0 PQ: 0 ANSI: 5
[ 2.287551] scsi 7:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
[ 2.291458] scsi 7:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5
[ 2.302192] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.302197] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.302240] sd 0:0:0:0: [sda] Write Protect is off
[ 2.302243] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.302267] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.319893] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.319898] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.320126] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.325106] sda: sda1 sda2
[ 2.325487] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.327243] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.327396] sr 7:0:1:0: Attached scsi CD-ROM sr1
[ 2.381097] usb 3-2: New USB device found, idVendor=1241, idProduct=1122
[ 2.381103] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.393383] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input0
[ 2.393485] generic-usb 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
[ 2.393511] usbcore: registered new interface driver usbhid
[ 2.393514] usbhid: USB HID core driver
[ 2.644039] usb 4-2: new low-speed USB device number 2 using ohci_hcd
[ 2.705368] md: raid1 personality registered for level 1
[ 2.770483] mdadm: sending ioctl 800c0910 to a partition!
[ 2.770488] mdadm: sending ioctl 800c0910 to a partition!
[ 2.770500] mdadm: sending ioctl 1261 to a partition!
[ 2.770502] mdadm: sending ioctl 1261 to a partition!
[ 2.770704] mdadm: sending ioctl 1261 to a partition!
[ 2.770706] mdadm: sending ioctl 1261 to a partition!
[ 2.770834] mdadm: sending ioctl 1261 to a partition!
[ 2.770836] mdadm: sending ioctl 1261 to a partition!
[ 2.770951] mdadm: sending ioctl 1261 to a partition!
[ 2.770953] mdadm: sending ioctl 1261 to a partition!
[ 2.774018] md: md0 stopped.
[ 2.774992] md: bind<sda1>
[ 2.776690] bio: create slab <bio-1> at 1
[ 2.776764] md/raid1:md0: active with 1 out of 2 mirrors
[ 2.776795] md0: detected capacity change from 0 to 509804544
[ 2.778380] md0: unknown partition table
[ 2.806888] md: md1 stopped.
[ 2.807478] md: bind<sda2>
[ 2.809378] md/raid1:md1: active with 1 out of 2 mirrors
[ 2.809410] md1: detected capacity change from 0 to 1999886286848
[ 2.811609] md1: unknown partition table
[ 2.815216] device-mapper: uevent: version 1.0.3
[ 2.815568] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.817102] usb 4-2: New USB device found, idVendor=046d, idProduct=c30f
[ 2.817107] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.817110] usb 4-2: Product: Logitech USB Keyboard
[ 2.817112] usb 4-2: Manufacturer: Logitech
[ 2.825437] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input1
[ 2.825514] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-2/input0
[ 2.838161] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input2
[ 2.838205] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-2/input1
[ 3.100025] usb 4-3: new full-speed USB device number 3 using ohci_hcd
[ 3.267106] usb 4-3: New USB device found, idVendor=058f, idProduct=9254
[ 3.267109] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.267111] usb 4-3: Product: Generic USB Hub
[ 3.267113] usb 4-3: Manufacturer: ALCOR
[ 3.269150] hub 4-3:1.0: USB hub found
[ 3.271106] hub 4-3:1.0: 4 ports detected
[ 17.228048] Intel AES-NI instructions are not detected.
[ 29.917656] scsi_verify_blk_ioctl: 60 callbacks suppressed
[ 29.917661] mdadm: sending ioctl 1261 to a partition!
[ 29.917665] mdadm: sending ioctl 1261 to a partition!
[ 30.828596] fstype: sending ioctl 540f to a partition!
[ 30.945625] PM: Starting manual resume from disk
[ 30.945631] PM: Hibernation image partition 253:2 present
[ 30.945633] PM: Looking for hibernation image.
[ 30.945919] PM: Image not found (code -22)
[ 30.945924] PM: Hibernation image not present or could not be loaded.
[ 30.955584] kjournald starting. Commit interval 5 seconds
[ 30.955619] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 32.220800] udevd[440]: starting version 175
[ 32.521563] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 32.521574] ACPI: Power Button [PWRB]
[ 32.521650] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 32.521654] ACPI: Power Button [PWRF]
[ 32.534302] wmi: Mapper loaded
[ 32.566008] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.568564] udevd[488]: renamed network interface eth0 to eth3
[ 32.887906] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 32.903774] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 32.903780] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.088462] [drm] Initialized drm 1.1.0 20060810
[ 33.144790] mdadm: sending ioctl 1261 to a partition!
[ 33.144795] mdadm: sending ioctl 1261 to a partition!
[ 33.144824] mdadm: sending ioctl 1261 to a partition!
[ 33.144830] mdadm: sending ioctl 1261 to a partition!
[ 33.214172] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 33.214269] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 33.609309] [drm] radeon kernel modesetting enabled.
[ 33.609437] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 33.609444] radeon 0000:01:05.0: setting latency timer to 64
[ 33.609650] [drm] initializing kernel modesetting (RS780 0x1002:0x9610 0x1849:0x9610).
[ 33.609678] [drm] register mmio base: 0xFDFF0000
[ 33.609680] [drm] register mmio size: 65536
[ 33.615088] ATOM BIOS: ASROCK
[ 33.615116] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 33.615120] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 33.615512] [drm] Detected VRAM RAM=256M, BAR=256M
[ 33.615517] [drm] RAM width 32bits DDR
[ 33.615639] [TTM] Zone kernel: Available graphics memory: 434062 kiB.
[ 33.615643] [TTM] Zone highmem: Available graphics memory: 1943794 kiB.
[ 33.615645] [TTM] Initializing pool allocator.
[ 33.615681] [drm] radeon: 256M of VRAM memory ready
[ 33.615684] [drm] radeon: 512M of GTT memory ready.
[ 33.615705] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 33.615707] [drm] Driver supports precise vblank timestamp query.
[ 33.615726] [drm] radeon: irq initialized.
[ 33.615732] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 33.618453] [drm] Loading RS780 Microcode
[ 33.822562] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 33.868291] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 33.868390] radeon 0000:01:05.0: WB enabled
[ 33.899525] [drm] ring test succeeded in 1 usecs
[ 33.899700] [drm] radeon: ib pool ready.
[ 33.899775] [drm] ib test succeeded in 0 usecs
[ 33.900954] [drm] Radeon Display Connectors
[ 33.900958] [drm] Connector 0:
[ 33.900960] [drm] VGA
[ 33.900962] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 33.900964] [drm] Encoders:
[ 33.900966] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 33.900968] [drm] Connector 1:
[ 33.900969] [drm] DVI-D
[ 33.900970] [drm] HPD3
[ 33.900972] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 33.900974] [drm] Encoders:
[ 33.900976] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 33.901033] [drm] radeon: power management initialized
[ 33.938064] mdadm: sending ioctl 800c0910 to a partition!
[ 33.938070] mdadm: sending ioctl 800c0910 to a partition!
[ 33.938081] mdadm: sending ioctl 1261 to a partition!
[ 34.002402] [drm] fb mappable at 0xD0142000
[ 34.002406] [drm] vram apper at 0xD0000000
[ 34.002408] [drm] size 5242880
[ 34.002409] [drm] fb depth is 24
[ 34.002411] [drm] pitch is 5120
[ 34.002512] fbcon: radeondrmfb (fb0) is primary device
[ 34.045051] Console: switching to colour frame buffer device 160x64
[ 34.061976] fb0: radeondrmfb frame buffer device
[ 34.061978] drm: registered panic notifier
[ 34.061985] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[ 34.619595] EXT3-fs (dm-1): using internal journal
[ 35.384933] loop: module loaded
[ 35.433130] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e (2 cpu cores) (version 2.20.00)
[ 35.433189] powernow-k8: fid 0x11 (2500 MHz), vid 0xe
[ 35.433191] powernow-k8: fid 0x10 (2400 MHz), vid 0xf
[ 35.433193] powernow-k8: fid 0xe (2200 MHz), vid 0x11
[ 35.433195] powernow-k8: fid 0xc (2000 MHz), vid 0x13
[ 35.433197] powernow-k8: fid 0xa (1800 MHz), vid 0x15
[ 35.433199] powernow-k8: fid 0x2 (1000 MHz), vid 0x16
[ 35.460371] w83627ehf: Found W83627EHG chip at 0x290
[ 35.603053] kvm: Nested Virtualization enabled
[ 35.780586] scsi_verify_blk_ioctl: 33 callbacks suppressed
[ 35.780596] mdadm: sending ioctl 800c0910 to a partition!
[ 35.780608] mdadm: sending ioctl 1261 to a partition!
[ 35.790411] mdadm: sending ioctl 1261 to a partition!
[ 35.790875] mdadm: sending ioctl 1261 to a partition!
[ 35.817107] mdadm: sending ioctl 1261 to a partition!
[ 35.818008] mdadm: sending ioctl 1261 to a partition!
[ 35.818241] mdadm: sending ioctl 1261 to a partition!
[ 35.911030] mdadm: sending ioctl 800c0910 to a partition!
[ 35.911040] mdadm: sending ioctl 1261 to a partition!
[ 35.921199] mdadm: sending ioctl 1261 to a partition!
[ 37.626858] Adding 4194300k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194300k
[ 39.817055] kjournald starting. Commit interval 5 seconds
[ 39.849102] EXT3-fs (md0): using internal journal
[ 39.849114] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 39.955959] kjournald starting. Commit interval 5 seconds
[ 40.031613] EXT3-fs (dm-6): using internal journal
[ 40.031628] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[ 40.328302] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 40.329236] SGI XFS Quota Management subsystem
[ 40.386736] XFS (dm-7): Mounting Filesystem
[ 40.639142] XFS (dm-7): Ending clean mount
[ 40.660972] XFS (dm-8): Mounting Filesystem
[ 40.904494] XFS (dm-8): Ending clean mount
[ 41.026725] REISERFS (device dm-5): found reiserfs format "3.6" with standard journal
[ 41.026744] REISERFS (device dm-5): using ordered data mode
[ 41.026748] reiserfs: using flush barriers
[ 41.036450] REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 41.037955] REISERFS (device dm-5): checking transaction log (dm-5)
[ 41.078611] REISERFS (device dm-5): Using r5 hash to sort names
[ 41.130697] kjournald starting. Commit interval 5 seconds
[ 41.131191] EXT3-fs (dm-3): using internal journal
[ 41.131205] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 41.163368] kjournald starting. Commit interval 5 seconds
[ 41.163855] EXT3-fs (dm-4): using internal journal
[ 41.163863] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 66.833515] postgres (1935): /proc/1935/oom_adj is deprecated, please use /proc/1935/oom_score_adj instead.
[ 82.556056] r8169 0000:04:00.0: eth3: link down
[ 82.556075] r8169 0000:04:00.0: eth3: link down
[ 82.556558] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 84.641858] r8169 0000:04:00.0: eth3: link up
[ 84.642218] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 86.680226] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 87.221851] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 95.792032] eth3: no IPv6 routers present
[ 1892.793210] ata1: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[ 1892.793218] ata1: SError: { HostInt }
[ 1892.793226] ata1: hard resetting link
[ 1893.284037] ata1: softreset failed (device not ready)
[ 1893.284045] ata1: applying PMP SRST workaround and retrying
[ 1893.456064] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1893.468090] ata1.00: configured for UDMA/100
[ 1893.484043] ata1: EH complete
[ 1895.488146] PM: Syncing filesystems ... done.
[ 1896.653805] PM: Preparing system for mem sleep
[ 1896.752411] Freezing user space processes ... (elapsed 0.04 seconds) done.
[ 1896.800029] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1896.816037] PM: Entering mem sleep
[ 1896.816072] Suspending console(s) (use no_console_suspend to debug)
[ 1896.816617] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1896.817022] sd 0:0:0:0: [sda] Stopping disk
[ 1896.817314] r8169 0000:04:00.0: eth3: link down
[ 1896.820481] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 1896.832087] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 1896.860034] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 1896.884027] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 1896.888060] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 1896.896086] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 1896.896105] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 1896.896122] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 1896.947190] radeon 0000:01:05.0: PCI INT A disabled
[ 1897.128079] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 1897.253983] ahci 0000:00:11.0: PCI INT A disabled
[ 1897.268055] PM: suspend of devices complete after 451.731 msecs
[ 1897.268264] r8169 0000:04:00.0: PME# enabled
[ 1897.268275] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 1897.284138] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 1897.284240] ehci_hcd 0000:00:13.2: PME# enabled
[ 1897.284245] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 1897.300041] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 1897.300069] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 1897.300102] ehci_hcd 0000:00:12.2: PME# enabled
[ 1897.300106] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 1897.316041] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 1897.316068] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 1897.316126] PM: late suspend of devices complete after 48.066 msecs
[ 1897.316265] ACPI: Preparing to enter system sleep state S3
[ 1897.716282] PM: Saving platform NVS memory
[ 1897.716732] Disabling non-boot CPUs ...
[ 1897.820023] CPU 1 is now offline
[ 1897.820581] ACPI: Low-level resume complete
[ 1897.820581] PM: Restoring platform NVS memory
[ 1897.820581] Enabling non-boot CPUs ...
[ 1897.820581] Booting Node 0 Processor 1 APIC 0x1
[ 1897.820581] smpboot cpu 1: start_ip = 9b000
[ 1897.718074] Initializing CPU#1
[ 1897.718074] Calibrating delay loop (skipped) already calibrated this CPU
[ 1897.832387] NMI watchdog enabled, takes one hw-pmu counter.
[ 1897.832618] CPU1 is up
[ 1897.833230] ACPI: Waking up from system sleep state S3
[ 1897.833743] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1897.833774] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1897.833799] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 1897.833856] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 1897.833884] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 1897.848034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 1897.848065] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 1897.848079] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 1897.848085] ehci_hcd 0000:00:12.2: PME# disabled
[ 1897.848112] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 1897.848139] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 1897.864028] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 1897.864058] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 1897.864072] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 1897.864077] ehci_hcd 0000:00:13.2: PME# disabled
[ 1897.864131] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 1897.864169] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 1897.864250] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 1897.864278] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 1897.864288] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 1897.864292] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x100107)
[ 1897.864318] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 1897.864326] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 1897.864332] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 1897.864341] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 1897.864506] PM: early resume of devices complete after 30.841 msecs
[ 1897.864599] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1897.864691] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1897.864715] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1897.864817] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1897.864839] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1897.864852] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1897.864888] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1897.864923] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1897.864941] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1897.864973] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1897.864996] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1897.864999] radeon 0000:01:05.0: setting latency timer to 64
[ 1897.865459] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 1897.865465] r8169 0000:04:00.0: PME# disabled
[ 1897.869214] sd 0:0:0:0: [sda] Starting disk
[ 1897.884157] r8169 0000:04:00.0: eth3: link down
[ 1897.894642] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1897.894839] radeon 0000:01:05.0: WB enabled
[ 1897.925766] [drm] ring test succeeded in 1 usecs
[ 1897.925779] [drm] ib test succeeded in 0 usecs
[ 1898.036501] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 1898.036505] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 1898.036508] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 1898.044508] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1898.044512] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 1898.044516] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1898.052440] ata8.00: configured for UDMA/33
[ 1898.068439] ata8.01: configured for UDMA/33
[ 1898.184045] ata5: SATA link down (SStatus 0 SControl 300)
[ 1898.184078] ata3: SATA link down (SStatus 0 SControl 300)
[ 1898.188042] ata6: SATA link down (SStatus 0 SControl 300)
[ 1898.188082] ata2: SATA link down (SStatus 0 SControl 300)
[ 1898.188112] ata4: SATA link down (SStatus 0 SControl 300)
[ 1899.923379] r8169 0000:04:00.0: eth3: link up
[ 1907.880021] ata1: softreset failed (device not ready)
[ 1911.396019] ata1: softreset failed (device not ready)
[ 1911.396022] ata1: applying PMP SRST workaround and retrying
[ 1911.568043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1911.580517] ata1.00: configured for UDMA/100
[ 1911.626955] PM: resume of devices complete after 13762.414 msecs
[ 1911.627388] PM: Finishing wakeup.
[ 1911.627390] Restarting tasks ... done.
[ 2720.428422] PM: Syncing filesystems ... done.
[ 2720.850634] PM: Preparing system for mem sleep
[ 2720.864540] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2720.880060] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2720.896037] PM: Entering mem sleep
[ 2720.896076] Suspending console(s) (use no_console_suspend to debug)
[ 2720.896600] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2720.896899] sd 0:0:0:0: [sda] Stopping disk
[ 2720.897436] r8169 0000:04:00.0: eth3: link down
[ 2720.908185] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 2720.912074] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 2720.940037] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 2720.964027] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 2720.968061] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 2720.976049] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 2720.976094] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 2720.976113] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 2721.033691] radeon 0000:01:05.0: PCI INT A disabled
[ 2721.204101] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 2721.334134] ahci 0000:00:11.0: PCI INT A disabled
[ 2721.348053] PM: suspend of devices complete after 451.754 msecs
[ 2721.348276] r8169 0000:04:00.0: PME# enabled
[ 2721.348292] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 2721.364140] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 2721.364241] ehci_hcd 0000:00:13.2: PME# enabled
[ 2721.364245] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 2721.380042] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 2721.380069] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 2721.380101] ehci_hcd 0000:00:12.2: PME# enabled
[ 2721.380106] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 2721.396042] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 2721.396069] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 2721.396176] PM: late suspend of devices complete after 48.117 msecs
[ 2721.396312] ACPI: Preparing to enter system sleep state S3
[ 2721.796270] PM: Saving platform NVS memory
[ 2721.796679] Disabling non-boot CPUs ...
[ 2721.900016] CPU 1 is now offline
[ 2721.900626] ACPI: Low-level resume complete
[ 2721.900626] PM: Restoring platform NVS memory
[ 2721.900626] Enabling non-boot CPUs ...
[ 2721.900626] Booting Node 0 Processor 1 APIC 0x1
[ 2721.900626] smpboot cpu 1: start_ip = 9b000
[ 2721.798058] Initializing CPU#1
[ 2721.798058] Calibrating delay loop (skipped) already calibrated this CPU
[ 2721.912465] NMI watchdog enabled, takes one hw-pmu counter.
[ 2721.912700] CPU1 is up
[ 2721.913319] ACPI: Waking up from system sleep state S3
[ 2721.913826] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2721.913857] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2721.913882] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 2721.913938] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 2721.913966] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 2721.928034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 2721.928063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 2721.928078] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 2721.928083] ehci_hcd 0000:00:12.2: PME# disabled
[ 2721.928110] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 2721.928137] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 2721.944031] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 2721.944061] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 2721.944075] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 2721.944080] ehci_hcd 0000:00:13.2: PME# disabled
[ 2721.944134] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 2721.944172] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 2721.944253] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 2721.944281] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 2721.944291] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 2721.944318] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 2721.944326] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 2721.944332] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 2721.944342] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 2721.944506] PM: early resume of devices complete after 30.758 msecs
[ 2721.944599] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2721.944637] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2721.944700] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2721.944743] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2721.944842] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2721.944864] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2721.944887] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2721.944906] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2721.944924] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2721.944951] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2721.944963] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2721.944966] radeon 0000:01:05.0: setting latency timer to 64
[ 2721.945996] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 2721.946002] r8169 0000:04:00.0: PME# disabled
[ 2721.949755] sd 0:0:0:0: [sda] Starting disk
[ 2721.964160] r8169 0000:04:00.0: eth3: link down
[ 2721.974414] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 2721.974650] radeon 0000:01:05.0: WB enabled
[ 2722.005577] [drm] ring test succeeded in 1 usecs
[ 2722.005590] [drm] ib test succeeded in 0 usecs
[ 2722.108501] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 2722.108505] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 2722.108508] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 2722.116507] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 2722.116511] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 2722.116515] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2722.124441] ata8.00: configured for UDMA/33
[ 2722.140440] ata8.01: configured for UDMA/33
[ 2722.264045] ata2: SATA link down (SStatus 0 SControl 300)
[ 2722.268042] ata5: SATA link down (SStatus 0 SControl 300)
[ 2722.268073] ata6: SATA link down (SStatus 0 SControl 300)
[ 2722.268103] ata4: SATA link down (SStatus 0 SControl 300)
[ 2722.268132] ata3: SATA link down (SStatus 0 SControl 300)
[ 2723.626328] r8169 0000:04:00.0: eth3: link up
[ 2731.956023] ata1: softreset failed (device not ready)
[ 2735.472019] ata1: softreset failed (device not ready)
[ 2735.472022] ata1: applying PMP SRST workaround and retrying
[ 2735.644031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2735.655657] ata1.00: configured for UDMA/100
[ 2735.697070] PM: resume of devices complete after 13752.529 msecs
[ 2735.697506] PM: Finishing wakeup.
[ 2735.697508] Restarting tasks ... done.
[ 6581.481318] ata1: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[ 6581.481333] ata1: SError: { HostInt }
[ 6581.481348] ata1: hard resetting link
[ 6581.972034] ata1: softreset failed (device not ready)
[ 6581.972040] ata1: applying PMP SRST workaround and retrying
[ 6582.144037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6582.156249] ata1.00: configured for UDMA/100
[ 6582.172019] ata1: EH complete
[ 6584.408144] PM: Syncing filesystems ... done.
[ 6584.753594] PM: Preparing system for mem sleep
[ 6584.772392] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 6584.788076] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 6584.804036] PM: Entering mem sleep
[ 6584.804076] Suspending console(s) (use no_console_suspend to debug)
[ 6584.804591] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6584.804907] sd 0:0:0:0: [sda] Stopping disk
[ 6584.812457] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 6584.820075] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 6584.848048] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 6584.872032] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 6584.876064] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 6584.884070] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 6584.884099] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 6584.884118] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 6584.960204] radeon 0000:01:05.0: PCI INT A disabled
[ 6585.120097] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 6585.243513] ahci 0000:00:11.0: PCI INT A disabled
[ 6585.256050] PM: suspend of devices complete after 451.747 msecs
[ 6585.256258] r8169 0000:04:00.0: PME# enabled
[ 6585.256272] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 6585.272140] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 6585.272242] ehci_hcd 0000:00:13.2: PME# enabled
[ 6585.272246] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 6585.288056] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 6585.288084] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 6585.288117] ehci_hcd 0000:00:12.2: PME# enabled
[ 6585.288121] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 6585.304043] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 6585.304070] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 6585.304166] PM: late suspend of devices complete after 48.111 msecs
[ 6585.304273] ACPI: Preparing to enter system sleep state S3
[ 6585.704283] PM: Saving platform NVS memory
[ 6585.704699] Disabling non-boot CPUs ...
[ 6585.808018] CPU 1 is now offline
[ 6585.808639] ACPI: Low-level resume complete
[ 6585.808639] PM: Restoring platform NVS memory
[ 6585.808639] Enabling non-boot CPUs ...
[ 6585.808639] Booting Node 0 Processor 1 APIC 0x1
[ 6585.808639] smpboot cpu 1: start_ip = 9b000
[ 6585.706080] Initializing CPU#1
[ 6585.706080] Calibrating delay loop (skipped) already calibrated this CPU
[ 6585.820480] NMI watchdog enabled, takes one hw-pmu counter.
[ 6585.820714] CPU1 is up
[ 6585.821349] ACPI: Waking up from system sleep state S3
[ 6585.821830] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 6585.821861] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 6585.821886] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 6585.821943] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 6585.821971] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 6585.836034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 6585.836064] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 6585.836078] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 6585.836083] ehci_hcd 0000:00:12.2: PME# disabled
[ 6585.836111] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 6585.836138] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 6585.852033] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 6585.852062] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 6585.852076] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 6585.852081] ehci_hcd 0000:00:13.2: PME# disabled
[ 6585.852135] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 6585.852173] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 6585.852254] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 6585.852282] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 6585.852292] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 6585.852320] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 6585.852328] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 6585.852334] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 6585.852343] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 6585.852509] PM: early resume of devices complete after 30.756 msecs
[ 6585.852602] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6585.852642] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6585.852704] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6585.852750] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6585.852848] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6585.852871] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6585.852895] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6585.852905] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6585.852924] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6585.852935] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6585.853041] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6585.853045] radeon 0000:01:05.0: setting latency timer to 64
[ 6585.853412] sd 0:0:0:0: [sda] Starting disk
[ 6585.856044] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 6585.856050] r8169 0000:04:00.0: PME# disabled
[ 6585.882090] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 6585.882483] radeon 0000:01:05.0: WB enabled
[ 6585.913421] [drm] ring test succeeded in 1 usecs
[ 6585.913438] [drm] ib test succeeded in 0 usecs
[ 6586.024507] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 6586.024511] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 6586.024515] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 6586.032500] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 6586.032504] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 6586.032507] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6586.040434] ata8.00: configured for UDMA/33
[ 6586.056451] ata8.01: configured for UDMA/33
[ 6586.172048] ata2: SATA link down (SStatus 0 SControl 300)
[ 6586.172081] ata6: SATA link down (SStatus 0 SControl 300)
[ 6586.172110] ata4: SATA link down (SStatus 0 SControl 300)
[ 6586.172140] ata5: SATA link down (SStatus 0 SControl 300)
[ 6586.172168] ata3: SATA link down (SStatus 0 SControl 300)
[ 6595.864020] ata1: softreset failed (device not ready)
[ 6599.268018] ata1: softreset failed (device not ready)
[ 6599.268022] ata1: applying PMP SRST workaround and retrying
[ 6599.440029] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6599.452026] ata1.00: configured for UDMA/100
[ 6599.500642] PM: resume of devices complete after 13648.099 msecs
[ 6599.501074] PM: Finishing wakeup.
[ 6599.501075] Restarting tasks ... done.
[ 6600.589989] r8169 0000:04:00.0: eth3: link down
[ 6600.590007] r8169 0000:04:00.0: eth3: link down
[ 6600.590720] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 6602.235285] r8169 0000:04:00.0: eth3: link up
[ 6602.235636] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 6612.544035] eth3: no IPv6 routers present
[ 6634.812653] fuse init (API version 7.17)
[ 8333.340485] ata1: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[ 8333.340498] ata1: SError: { HostInt }
[ 8333.340512] ata1: hard resetting link
[ 8333.832037] ata1: softreset failed (device not ready)
[ 8333.832043] ata1: applying PMP SRST workaround and retrying
[ 8334.004061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8334.015186] ata1.00: configured for UDMA/100
[ 8334.028051] ata1: EH complete
[ 8336.129136] PM: Syncing filesystems ... done.
[ 8336.469618] PM: Preparing system for mem sleep
[ 8336.491946] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 8336.508102] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 8336.524042] PM: Entering mem sleep
[ 8336.524082] Suspending console(s) (use no_console_suspend to debug)
[ 8336.524640] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8336.524993] sd 0:0:0:0: [sda] Stopping disk
[ 8336.526761] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 8336.540072] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 8336.568031] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 8336.592026] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 8336.596062] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 8336.604089] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 8336.604108] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 8336.604127] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 8336.658148] radeon 0000:01:05.0: PCI INT A disabled
[ 8336.832108] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 8336.962416] ahci 0000:00:11.0: PCI INT A disabled
[ 8336.976055] PM: suspend of devices complete after 451.719 msecs
[ 8336.976271] r8169 0000:04:00.0: PME# enabled
[ 8336.976282] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 8336.992146] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 8336.992247] ehci_hcd 0000:00:13.2: PME# enabled
[ 8336.992251] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 8337.008043] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 8337.008070] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 8337.008103] ehci_hcd 0000:00:12.2: PME# enabled
[ 8337.008107] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 8337.024043] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 8337.024069] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 8337.024166] PM: late suspend of devices complete after 48.106 msecs
[ 8337.024298] ACPI: Preparing to enter system sleep state S3
[ 8337.424272] PM: Saving platform NVS memory
[ 8337.424699] Disabling non-boot CPUs ...
[ 8337.528016] CPU 1 is now offline
[ 8337.528613] ACPI: Low-level resume complete
[ 8337.528613] PM: Restoring platform NVS memory
[ 8337.528613] Enabling non-boot CPUs ...
[ 8337.528613] Booting Node 0 Processor 1 APIC 0x1
[ 8337.528613] smpboot cpu 1: start_ip = 9b000
[ 8337.426072] Initializing CPU#1
[ 8337.426072] Calibrating delay loop (skipped) already calibrated this CPU
[ 8337.540399] NMI watchdog enabled, takes one hw-pmu counter.
[ 8337.540645] CPU1 is up
[ 8337.541256] ACPI: Waking up from system sleep state S3
[ 8337.541741] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8337.541772] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8337.541797] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 8337.541854] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 8337.541882] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 8337.556034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 8337.556063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 8337.556078] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 8337.556083] ehci_hcd 0000:00:12.2: PME# disabled
[ 8337.556110] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 8337.556138] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 8337.572028] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 8337.572057] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 8337.572072] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 8337.572077] ehci_hcd 0000:00:13.2: PME# disabled
[ 8337.572131] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 8337.572169] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 8337.572250] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 8337.572278] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 8337.572289] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 8337.572315] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 8337.572324] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 8337.572330] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 8337.572339] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8337.572505] PM: early resume of devices complete after 30.843 msecs
[ 8337.572598] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8337.572643] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8337.572696] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8337.572750] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8337.572850] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8337.572872] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8337.572896] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8337.572906] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8337.572924] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8337.572937] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8337.572963] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8337.572966] radeon 0000:01:05.0: setting latency timer to 64
[ 8337.572971] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 8337.572977] r8169 0000:04:00.0: PME# disabled
[ 8337.577375] sd 0:0:0:0: [sda] Starting disk
[ 8337.602329] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 8337.602496] radeon 0000:01:05.0: WB enabled
[ 8337.633423] [drm] ring test succeeded in 1 usecs
[ 8337.633436] [drm] ib test succeeded in 0 usecs
[ 8337.740507] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 8337.740511] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 8337.740515] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 8337.748498] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 8337.748502] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 8337.748506] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8337.756435] ata8.00: configured for UDMA/33
[ 8337.772445] ata8.01: configured for UDMA/33
[ 8337.892046] ata2: SATA link down (SStatus 0 SControl 300)
[ 8337.896042] ata5: SATA link down (SStatus 0 SControl 300)
[ 8337.896072] ata6: SATA link down (SStatus 0 SControl 300)
[ 8337.896102] ata3: SATA link down (SStatus 0 SControl 300)
[ 8337.896132] ata4: SATA link down (SStatus 0 SControl 300)
[ 8347.584019] ata1: softreset failed (device not ready)
[ 8351.044017] ata1: softreset failed (device not ready)
[ 8351.044021] ata1: applying PMP SRST workaround and retrying
[ 8351.216028] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8351.227823] ata1.00: configured for UDMA/100
[ 8351.266188] PM: resume of devices complete after 13693.649 msecs
[ 8351.266569] PM: Finishing wakeup.
[ 8351.266571] Restarting tasks ... done.
[ 8352.629887] r8169 0000:04:00.0: eth3: link down
[ 8352.629908] r8169 0000:04:00.0: eth3: link down
[ 8352.630299] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 8354.285762] r8169 0000:04:00.0: eth3: link up
[ 8354.286121] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 8364.992029] eth3: no IPv6 routers present
[-- Attachment #1.1.3: 20120625.Xorg.0.log --]
[-- Type: text/x-log, Size: 66995 bytes --]
[ 90.509]
X.Org X Server 1.12.1.902 (1.12.2 RC 2)
Release Date: 2012-05-19
[ 90.509] X Protocol Version 11, Revision 0
[ 90.509] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 90.509] Current Operating System: Linux debian-system 3.2.0-2-686-pae #1 SMP Mon Jun 11 18:27:04 UTC 2012 i686
[ 90.510] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=/dev/mapper/lvm-root ro quiet
[ 90.510] Build Date: 20 May 2012 10:23:38AM
[ 90.510] xorg-server 2:1.12.1.902-1 (Cyril Brulebois <kibi@debian.org>)
[ 90.510] Current version of pixman: 0.26.0
[ 90.510] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 90.510] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 90.510] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 25 15:04:28 2012
[ 91.003] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 91.007] (==) No Layout section. Using the first Screen section.
[ 91.007] (==) No screen section available. Using defaults.
[ 91.007] (**) |-->Screen "Default Screen Section" (0)
[ 91.007] (**) | |-->Monitor "<default monitor>"
[ 91.029] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 91.029] (==) Automatically adding devices
[ 91.029] (==) Automatically enabling devices
[ 91.242] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 91.242] Entry deleted from font path.
[ 92.018] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 92.018] Entry deleted from font path.
[ 92.018] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 92.018] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 92.018] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 92.018] (II) Loader magic: 0xb77dd5a0
[ 92.018] (II) Module ABI versions:
[ 92.018] X.Org ANSI C Emulation: 0.4
[ 92.018] X.Org Video Driver: 12.0
[ 92.018] X.Org XInput driver : 16.0
[ 92.018] X.Org Server Extension : 6.0
[ 92.019] (--) PCI:*(0:1:5:0) 1002:9610:1849:9610 rev 0, Mem @ 0xd0000000/268435456, 0xfdff0000/65536, 0xfde00000/1048576, I/O @ 0x0000c000/256
[ 92.020] (II) Open ACPI successful (/var/run/acpid.socket)
[ 92.020] (II) LoadModule: "extmod"
[ 92.495] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 92.533] (II) Module extmod: vendor="X.Org Foundation"
[ 92.533] compiled for 1.12.1.902, module version = 1.0.0
[ 92.533] Module class: X.Org Server Extension
[ 92.533] ABI class: X.Org Server Extension, version 6.0
[ 92.533] (II) Loading extension SELinux
[ 92.534] (II) Loading extension MIT-SCREEN-SAVER
[ 92.534] (II) Loading extension XFree86-VidModeExtension
[ 92.534] (II) Loading extension XFree86-DGA
[ 92.534] (II) Loading extension DPMS
[ 92.534] (II) Loading extension XVideo
[ 92.534] (II) Loading extension XVideo-MotionCompensation
[ 92.534] (II) Loading extension X-Resource
[ 92.534] (II) LoadModule: "dbe"
[ 92.535] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 92.549] (II) Module dbe: vendor="X.Org Foundation"
[ 92.549] compiled for 1.12.1.902, module version = 1.0.0
[ 92.549] Module class: X.Org Server Extension
[ 92.549] ABI class: X.Org Server Extension, version 6.0
[ 92.549] (II) Loading extension DOUBLE-BUFFER
[ 92.549] (II) LoadModule: "glx"
[ 92.550] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 92.587] (II) Module glx: vendor="X.Org Foundation"
[ 92.587] compiled for 1.12.1.902, module version = 1.0.0
[ 92.587] ABI class: X.Org Server Extension, version 6.0
[ 92.598] (==) AIGLX enabled
[ 92.599] (II) Loading extension GLX
[ 92.599] (II) LoadModule: "record"
[ 92.599] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 92.654] (II) Module record: vendor="X.Org Foundation"
[ 92.654] compiled for 1.12.1.902, module version = 1.13.0
[ 92.654] Module class: X.Org Server Extension
[ 92.654] ABI class: X.Org Server Extension, version 6.0
[ 92.654] (II) Loading extension RECORD
[ 92.654] (II) LoadModule: "dri"
[ 92.655] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 93.087] (II) Module dri: vendor="X.Org Foundation"
[ 93.088] compiled for 1.12.1.902, module version = 1.0.0
[ 93.088] ABI class: X.Org Server Extension, version 6.0
[ 93.088] (II) Loading extension XFree86-DRI
[ 93.088] (II) LoadModule: "dri2"
[ 93.089] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 93.362] (II) Module dri2: vendor="X.Org Foundation"
[ 93.362] compiled for 1.12.1.902, module version = 1.2.0
[ 93.362] ABI class: X.Org Server Extension, version 6.0
[ 93.362] (II) Loading extension DRI2
[ 93.362] (==) Matched ati as autoconfigured driver 0
[ 93.362] (==) Matched vesa as autoconfigured driver 1
[ 93.362] (==) Matched fbdev as autoconfigured driver 2
[ 93.362] (==) Assigned the driver to the xf86ConfigLayout
[ 93.362] (II) LoadModule: "ati"
[ 93.362] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 93.379] (II) Module ati: vendor="X.Org Foundation"
[ 93.379] compiled for 1.12.1.902, module version = 6.14.4
[ 93.380] Module class: X.Org Video Driver
[ 93.380] ABI class: X.Org Video Driver, version 12.0
[ 93.380] (II) LoadModule: "radeon"
[ 93.380] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 93.630] (II) Module radeon: vendor="X.Org Foundation"
[ 93.631] compiled for 1.12.1.902, module version = 6.14.4
[ 93.631] Module class: X.Org Video Driver
[ 93.631] ABI class: X.Org Video Driver, version 12.0
[ 93.640] (II) LoadModule: "vesa"
[ 93.641] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 93.775] (II) Module vesa: vendor="X.Org Foundation"
[ 93.775] compiled for 1.12.1, module version = 2.3.1
[ 93.775] Module class: X.Org Video Driver
[ 93.775] ABI class: X.Org Video Driver, version 12.0
[ 93.775] (II) LoadModule: "fbdev"
[ 93.776] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 94.020] (II) Module fbdev: vendor="X.Org Foundation"
[ 94.021] compiled for 1.12.1, module version = 0.4.2
[ 94.022] ABI class: X.Org Video Driver, version 12.0
[ 94.022] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA
[ 94.044] (II) VESA: driver for VESA chipsets: vesa
[ 94.044] (II) FBDEV: driver for framebuffer: fbdev
[ 94.044] (++) using VT number 7
[ 94.064] (II) [KMS] Kernel modesetting enabled.
[ 94.065] (WW) Falling back to old probe method for vesa
[ 94.065] (WW) Falling back to old probe method for fbdev
[ 94.065] (II) Loading sub module "fbdevhw"
[ 94.065] (II) LoadModule: "fbdevhw"
[ 94.065] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 94.238] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 94.238] compiled for 1.12.1.902, module version = 0.0.2
[ 94.238] ABI class: X.Org Video Driver, version 12.0
[ 94.238] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 94.238] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 94.278] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 94.278] (==) RADEON(0): Default visual is TrueColor
[ 94.278] (==) RADEON(0): RGB weight 888
[ 94.278] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 94.278] (--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9610)
[ 94.278] (II) RADEON(0): PCI card detected
[ 94.279] drmOpenDevice: node name is /dev/dri/card0
[ 94.279] drmOpenDevice: open result is 9, (OK)
[ 94.279] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 94.279] drmOpenDevice: node name is /dev/dri/card0
[ 94.279] drmOpenDevice: open result is 9, (OK)
[ 94.279] drmOpenByBusid: drmOpenMinor returns 9
[ 94.279] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 94.279] (II) Loading sub module "exa"
[ 94.279] (II) LoadModule: "exa"
[ 94.279] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 94.686] (II) Module exa: vendor="X.Org Foundation"
[ 94.686] compiled for 1.12.1.902, module version = 2.5.0
[ 94.686] ABI class: X.Org Video Driver, version 12.0
[ 94.686] (II) RADEON(0): KMS Color Tiling: enabled
[ 94.686] (II) RADEON(0): KMS Pageflipping: enabled
[ 94.686] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 94.712] (II) RADEON(0): Output VGA-0 has no monitor section
[ 94.769] (II) RADEON(0): Output DVI-0 has no monitor section
[ 94.792] (II) RADEON(0): EDID for output VGA-0
[ 94.850] (II) RADEON(0): EDID for output DVI-0
[ 94.850] (II) RADEON(0): Manufacturer: SAM Model: 194 Serial#: 1112092985
[ 94.850] (II) RADEON(0): Year: 2006 Week: 3
[ 94.850] (II) RADEON(0): EDID Version: 1.3
[ 94.850] (II) RADEON(0): Digital Display Input
[ 94.850] (II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 94.850] (II) RADEON(0): Gamma: 2.20
[ 94.850] (II) RADEON(0): DPMS capabilities: Off
[ 94.851] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 94.851] (II) RADEON(0): First detailed timing is preferred mode
[ 94.851] (II) RADEON(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 94.851] (II) RADEON(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 94.851] (II) RADEON(0): Supported established timings:
[ 94.851] (II) RADEON(0): 720x400@70Hz
[ 94.851] (II) RADEON(0): 640x480@60Hz
[ 94.851] (II) RADEON(0): 640x480@67Hz
[ 94.851] (II) RADEON(0): 640x480@72Hz
[ 94.851] (II) RADEON(0): 640x480@75Hz
[ 94.851] (II) RADEON(0): 800x600@56Hz
[ 94.851] (II) RADEON(0): 800x600@60Hz
[ 94.851] (II) RADEON(0): 800x600@72Hz
[ 94.851] (II) RADEON(0): 800x600@75Hz
[ 94.851] (II) RADEON(0): 832x624@75Hz
[ 94.851] (II) RADEON(0): 1024x768@60Hz
[ 94.851] (II) RADEON(0): 1024x768@70Hz
[ 94.851] (II) RADEON(0): 1024x768@75Hz
[ 94.851] (II) RADEON(0): 1280x1024@75Hz
[ 94.851] (II) RADEON(0): 1152x864@75Hz
[ 94.851] (II) RADEON(0): Manufacturer's mask: 0
[ 94.851] (II) RADEON(0): Supported standard timings:
[ 94.851] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 94.851] (II) RADEON(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 94.851] (II) RADEON(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 94.851] (II) RADEON(0): Supported detailed timing:
[ 94.851] (II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 94.851] (II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 94.851] (II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 94.852] (II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 94.852] (II) RADEON(0): Monitor name: SyncMaster
[ 94.852] (II) RADEON(0): Serial No: HMEA114277
[ 94.852] (II) RADEON(0): EDID (in hex):
[ 94.852] (II) RADEON(0): 00ffffffffffff004c2d940139314942
[ 94.852] (II) RADEON(0): 0310010380261e782ade95a3544c9926
[ 94.852] (II) RADEON(0): 0f5054bfef8081808140714f01010101
[ 94.852] (II) RADEON(0): 010101010101302a009851002a403070
[ 94.852] (II) RADEON(0): 1300782d1100001e000000fd00384b1e
[ 94.852] (II) RADEON(0): 510e000a202020202020000000fc0053
[ 94.852] (II) RADEON(0): 796e634d61737465720a2020000000ff
[ 94.852] (II) RADEON(0): 00484d45413131343237370a202000c0
[ 94.852] (II) RADEON(0): Printing probed modes for output DVI-0
[ 94.852] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 94.852] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 94.852] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 94.852] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 94.852] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 94.852] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 94.852] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 94.853] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 94.853] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 94.853] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 94.853] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 94.853] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 94.853] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 94.853] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 94.853] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 94.853] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 94.853] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 94.853] (II) RADEON(0): Output VGA-0 disconnected
[ 94.853] (II) RADEON(0): Output DVI-0 connected
[ 94.853] (II) RADEON(0): Using exact sizes for initial modes
[ 94.853] (II) RADEON(0): Output DVI-0 using initial mode 1280x1024
[ 94.853] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 94.853] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fac0000
[ 94.853] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 94.853] (==) RADEON(0): DPI set to (96, 96)
[ 94.853] (II) Loading sub module "fb"
[ 94.853] (II) LoadModule: "fb"
[ 94.854] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 94.975] (II) Module fb: vendor="X.Org Foundation"
[ 94.975] compiled for 1.12.1.902, module version = 1.0.0
[ 94.975] ABI class: X.Org ANSI C Emulation, version 0.4
[ 94.975] (II) Loading sub module "ramdac"
[ 94.975] (II) LoadModule: "ramdac"
[ 94.975] (II) Module "ramdac" already built-in
[ 94.975] (II) UnloadModule: "vesa"
[ 94.975] (II) Unloading vesa
[ 94.975] (II) UnloadModule: "fbdev"
[ 94.975] (II) Unloading fbdev
[ 94.975] (II) UnloadSubModule: "fbdevhw"
[ 94.975] (II) Unloading fbdevhw
[ 94.975] (--) Depth 24 pixmap format is 32 bpp
[ 95.003] (II) RADEON(0): [DRI2] Setup complete
[ 95.003] (II) RADEON(0): [DRI2] DRI driver: r600
[ 95.003] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 95.003] (II) RADEON(0): Front buffer size: 5120K
[ 95.003] (II) RADEON(0): VRAM usage limit set to 226483K
[ 95.046] (==) RADEON(0): Backing store disabled
[ 95.046] (II) RADEON(0): Direct rendering enabled
[ 95.073] (II) RADEON(0): Setting EXA maxPitchBytes
[ 95.073] (II) EXA(0): Driver allocated offscreen pixmaps
[ 95.073] (II) EXA(0): Driver registered support for the following operations:
[ 95.073] (II) Solid
[ 95.073] (II) Copy
[ 95.073] (II) Composite (RENDER acceleration)
[ 95.073] (II) UploadToScreen
[ 95.074] (II) DownloadFromScreen
[ 95.074] (II) RADEON(0): Acceleration enabled
[ 95.074] (==) RADEON(0): DPMS enabled
[ 95.074] (==) RADEON(0): Silken mouse enabled
[ 95.096] (II) RADEON(0): Set up textured video
[ 95.096] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 95.096] (II) RADEON(0): [XvMC] Extension initialized.
[ 95.096] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 95.097] (--) RandR disabled
[ 95.097] (II) Initializing built-in extension Generic Event Extension
[ 95.097] (II) Initializing built-in extension SHAPE
[ 95.097] (II) Initializing built-in extension MIT-SHM
[ 95.097] (II) Initializing built-in extension XInputExtension
[ 95.097] (II) Initializing built-in extension XTEST
[ 95.097] (II) Initializing built-in extension BIG-REQUESTS
[ 95.097] (II) Initializing built-in extension SYNC
[ 95.097] (II) Initializing built-in extension XKEYBOARD
[ 95.097] (II) Initializing built-in extension XC-MISC
[ 95.097] (II) Initializing built-in extension SECURITY
[ 95.097] (II) Initializing built-in extension XINERAMA
[ 95.097] (II) Initializing built-in extension XFIXES
[ 95.097] (II) Initializing built-in extension RENDER
[ 95.097] (II) Initializing built-in extension RANDR
[ 95.097] (II) Initializing built-in extension COMPOSITE
[ 95.097] (II) Initializing built-in extension DAMAGE
[ 95.098] (II) SELinux: Disabled on system
[ 100.525] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 100.525] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 100.525] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 100.525] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 100.526] (II) AIGLX: Loaded and initialized r600
[ 100.526] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 100.565] (II) RADEON(0): Setting screen physical size to 338 x 270
[ 103.443] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 103.443] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 103.443] (II) LoadModule: "evdev"
[ 103.443] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.712] (II) Module evdev: vendor="X.Org Foundation"
[ 103.712] compiled for 1.12.1, module version = 2.7.0
[ 103.712] Module class: X.Org XInput Driver
[ 103.712] ABI class: X.Org XInput driver, version 16.0
[ 103.712] (II) Using input driver 'evdev' for 'Power Button'
[ 103.712] (**) Power Button: always reports core events
[ 103.712] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 103.712] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 103.712] (--) evdev: Power Button: Found keys
[ 103.712] (II) evdev: Power Button: Configuring as keyboard
[ 103.712] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 103.712] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 103.712] (**) Option "xkb_rules" "evdev"
[ 103.712] (**) Option "xkb_model" "pc105"
[ 103.712] (**) Option "xkb_layout" "de"
[ 103.712] (**) Option "xkb_variant" "nodeadkeys"
[ 104.755] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 104.755] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 104.755] (II) Using input driver 'evdev' for 'Power Button'
[ 104.755] (**) Power Button: always reports core events
[ 104.755] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 104.756] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 104.756] (--) evdev: Power Button: Found keys
[ 104.756] (II) evdev: Power Button: Configuring as keyboard
[ 104.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 104.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 104.756] (**) Option "xkb_rules" "evdev"
[ 104.756] (**) Option "xkb_model" "pc105"
[ 104.756] (**) Option "xkb_layout" "de"
[ 104.756] (**) Option "xkb_variant" "nodeadkeys"
[ 104.757] (II) config/udev: Adding input device HID 1241:1122 (/dev/input/event0)
[ 104.758] (**) HID 1241:1122: Applying InputClass "evdev pointer catchall"
[ 104.758] (II) Using input driver 'evdev' for 'HID 1241:1122'
[ 104.758] (**) HID 1241:1122: always reports core events
[ 104.758] (**) evdev: HID 1241:1122: Device: "/dev/input/event0"
[ 104.758] (--) evdev: HID 1241:1122: Vendor 0x1241 Product 0x1122
[ 104.758] (--) evdev: HID 1241:1122: Found 9 mouse buttons
[ 104.758] (--) evdev: HID 1241:1122: Found scroll wheel(s)
[ 104.758] (--) evdev: HID 1241:1122: Found relative axes
[ 104.758] (--) evdev: HID 1241:1122: Found x and y relative axes
[ 104.758] (II) evdev: HID 1241:1122: Configuring as mouse
[ 104.758] (II) evdev: HID 1241:1122: Adding scrollwheel support
[ 104.758] (**) evdev: HID 1241:1122: YAxisMapping: buttons 4 and 5
[ 104.758] (**) evdev: HID 1241:1122: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 104.758] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input0/event0"
[ 104.758] (II) XINPUT: Adding extended input device "HID 1241:1122" (type: MOUSE, id 8)
[ 104.758] (II) evdev: HID 1241:1122: initialized for relative axes.
[ 104.759] (**) HID 1241:1122: (accel) keeping acceleration scheme 1
[ 104.759] (**) HID 1241:1122: (accel) acceleration profile 0
[ 104.759] (**) HID 1241:1122: (accel) acceleration factor: 2.000
[ 104.759] (**) HID 1241:1122: (accel) acceleration threshold: 4
[ 104.760] (II) config/udev: Adding input device HID 1241:1122 (/dev/input/mouse0)
[ 104.760] (II) No input driver specified, ignoring this device.
[ 104.760] (II) This device may have been added with another device file.
[ 104.761] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event1)
[ 104.761] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 104.761] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 104.761] (**) Logitech Logitech USB Keyboard: always reports core events
[ 104.761] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event1"
[ 104.761] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc30f
[ 104.761] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 104.761] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 104.761] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input1/event1"
[ 104.761] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 104.761] (**) Option "xkb_rules" "evdev"
[ 104.761] (**) Option "xkb_model" "pc105"
[ 104.761] (**) Option "xkb_layout" "de"
[ 104.761] (**) Option "xkb_variant" "nodeadkeys"
[ 104.763] (II) config/udev: Adding input device Logitech Logitech USB Keyboard (/dev/input/event2)
[ 104.763] (**) Logitech Logitech USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 104.763] (II) Using input driver 'evdev' for 'Logitech Logitech USB Keyboard'
[ 104.763] (**) Logitech Logitech USB Keyboard: always reports core events
[ 104.763] (**) evdev: Logitech Logitech USB Keyboard: Device: "/dev/input/event2"
[ 104.763] (--) evdev: Logitech Logitech USB Keyboard: Vendor 0x46d Product 0xc30f
[ 104.763] (--) evdev: Logitech Logitech USB Keyboard: Found keys
[ 104.763] (II) evdev: Logitech Logitech USB Keyboard: Configuring as keyboard
[ 104.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.1/input/input2/event2"
[ 104.763] (II) XINPUT: Adding extended input device "Logitech Logitech USB Keyboard" (type: KEYBOARD, id 10)
[ 104.763] (**) Option "xkb_rules" "evdev"
[ 104.763] (**) Option "xkb_model" "pc105"
[ 104.763] (**) Option "xkb_layout" "de"
[ 104.763] (**) Option "xkb_variant" "nodeadkeys"
[ 105.133] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 105.134] (II) RADEON(0): Using EDID range info for horizontal sync
[ 105.134] (II) RADEON(0): Using EDID range info for vertical refresh
[ 105.134] (II) RADEON(0): Printing DDC gathered Modelines:
[ 105.134] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 105.134] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 105.134] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 105.134] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 105.134] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 105.134] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 105.134] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 105.134] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 105.134] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 105.134] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 105.134] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 105.134] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 105.134] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 105.134] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 105.134] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 105.134] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 105.134] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 120.528] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 120.528] (II) RADEON(0): Using hsync ranges from config file
[ 120.528] (II) RADEON(0): Using vrefresh ranges from config file
[ 120.528] (II) RADEON(0): Printing DDC gathered Modelines:
[ 120.528] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 120.528] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 120.528] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 120.528] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 120.528] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 120.528] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 120.528] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 120.528] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 120.528] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 120.528] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 120.528] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 120.528] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 120.529] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 120.529] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 120.529] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 120.529] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 120.529] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 1896.752] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1911.669] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1911.714] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1911.828] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 1911.828] (II) RADEON(0): Using hsync ranges from config file
[ 1911.828] (II) RADEON(0): Using vrefresh ranges from config file
[ 1911.828] (II) RADEON(0): Printing DDC gathered Modelines:
[ 1911.828] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 1911.828] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1911.828] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 1911.828] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1911.833] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2720.864] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 2735.717] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2735.784] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 2735.876] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 2735.876] (II) RADEON(0): Using hsync ranges from config file
[ 2735.876] (II) RADEON(0): Using vrefresh ranges from config file
[ 2735.876] (II) RADEON(0): Printing DDC gathered Modelines:
[ 2735.876] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 2735.876] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2735.876] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6269.978] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 6269.978] (II) RADEON(0): Using hsync ranges from config file
[ 6269.978] (II) RADEON(0): Using vrefresh ranges from config file
[ 6269.978] (II) RADEON(0): Printing DDC gathered Modelines:
[ 6269.978] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 6269.978] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6269.978] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6269.979] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6564.214] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 6564.214] (II) RADEON(0): Using hsync ranges from config file
[ 6564.214] (II) RADEON(0): Using vrefresh ranges from config file
[ 6564.214] (II) RADEON(0): Printing DDC gathered Modelines:
[ 6564.214] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 6564.214] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6564.214] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6564.215] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6564.215] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6564.215] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6565.550] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 6565.550] (II) RADEON(0): Using hsync ranges from config file
[ 6565.550] (II) RADEON(0): Using vrefresh ranges from config file
[ 6565.550] (II) RADEON(0): Printing DDC gathered Modelines:
[ 6565.550] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 6565.550] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6565.550] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 6565.550] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 6565.550] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6565.551] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6571.308] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 8908.601] (II) Open ACPI successful (/var/run/acpid.socket)
[ 8908.601] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 8908.706] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 8908.706] (II) RADEON(0): Using hsync ranges from config file
[ 8908.706] (II) RADEON(0): Using vrefresh ranges from config file
[ 8908.706] (II) RADEON(0): Printing DDC gathered Modelines:
[ 8908.706] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 8908.706] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8908.706] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8908.707] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8908.707] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 8908.794] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 8908.794] (II) RADEON(0): Using hsync ranges from config file
[ 8908.794] (II) RADEON(0): Using vrefresh ranges from config file
[ 8908.794] (II) RADEON(0): Printing DDC gathered Modelines:
[ 8908.794] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 8908.794] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8908.794] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8908.794] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8908.794] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 8908.794] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8908.794] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8908.794] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8908.794] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8908.795] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8908.795] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8908.795] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8908.795] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8908.795] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8908.795] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8908.795] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8908.795] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 8920.292] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 8934.554] (II) Open ACPI successful (/var/run/acpid.socket)
[ 8934.554] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 8934.657] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 8934.658] (II) RADEON(0): Using hsync ranges from config file
[ 8934.658] (II) RADEON(0): Using vrefresh ranges from config file
[ 8934.658] (II) RADEON(0): Printing DDC gathered Modelines:
[ 8934.658] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 8934.658] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8934.658] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 8960.196] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 8968.128] (II) Open ACPI successful (/var/run/acpid.socket)
[ 8968.129] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 8968.214] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 8968.214] (II) RADEON(0): Using hsync ranges from config file
[ 8968.214] (II) RADEON(0): Using vrefresh ranges from config file
[ 8968.214] (II) RADEON(0): Printing DDC gathered Modelines:
[ 8968.214] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 8968.214] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8968.215] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 10026.821] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 10033.323] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10033.323] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 10033.429] (II) RADEON(0): EDID vendor "SAM", prod id 404
[ 10033.429] (II) RADEON(0): Using hsync ranges from config file
[ 10033.429] (II) RADEON(0): Using vrefresh ranges from config file
[ 10033.429] (II) RADEON(0): Printing DDC gathered Modelines:
[ 10033.430] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10033.430] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 10033.430] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-06-25 19:14 Linux 3.2: After resume screen only turned on after switching terminals Paul Menzel
@ 2012-06-26 5:42 ` Michel Dänzer
2012-06-30 19:00 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Michel Dänzer @ 2012-06-26 5:42 UTC (permalink / raw)
To: Paul Menzel; +Cc: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 900 bytes --]
On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
>
> resuming from suspend to RAM the monitor was indicating by a blinking
> LED that it did not receive any signal. This is the first time this
> happened. Resuming from suspend to RAM had worked without problems
> before (and probably will work again the next tries).
>
> Logging in from SSH worked fine though. Switching terminal to tty1
> nothing changed but going back to tty7, where X was supposed to run),
> and the monitor detected a signal and showed the screensaver.
>
> Switching to tty1 still does not work though, that means the monitor
> indicates that it gets no signal.
What about tty2-6 or any others?
What does fbset -i say when the problem occurs?
--
Earthling Michel Dänzer | http://www.amd.com
Libre software enthusiast | Debian, X and DRI developer
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 190 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-06-26 5:42 ` Michel Dänzer
@ 2012-06-30 19:00 ` Paul Menzel
2012-07-04 13:41 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2012-06-30 19:00 UTC (permalink / raw)
To: Michel Dänzer; +Cc: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 2303 bytes --]
Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
> On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
> >
> > resuming from suspend to RAM the monitor was indicating by a blinking
> > LED that it did not receive any signal. This is the first time this
> > happened. Resuming from suspend to RAM had worked without problems
> > before (and probably will work again the next tries).
> >
> > Logging in from SSH worked fine though. Switching terminal to tty1
> > nothing changed but going back to tty7, where X was supposed to run),
> > and the monitor detected a signal and showed the screensaver.
> >
> > Switching to tty1 still does not work though, that means the monitor
> > indicates that it gets no signal.
>
> What about tty2-6 or any others?
It just happened again. tty2–6 also do not show anything.
> What does fbset -i say when the problem occurs?
I logged in over SSH not having switched the ttys yet. This is the
result.
$ fbset -i
mode "1280x1024"
geometry 1280 1024 1280 1024 32
timings 0 0 0 0 0 0 0
accel true
rgba 8/16,8/8,8/0,0/0
endmode
Frame buffer device information:
Name : radeondrmfb
Address : 0xd0142000
Size : 5242880
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 0
LineLength : 5120
Accelerator : No
This does not differ though after having switched between ttys and
getting a working X server again. The other ttys do not just show black.
When switching from tty7 with the X server running to a console(?) tty
then I shortly (half second) see some kind of test image, which contains
four horizontal colored stripes red, green, blue and white(?).
I could not find anything in the output of `dmesg`, but
`/var/log/syslog` contains several of the following lines.
Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
Thanks,
Paul
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-06-30 19:00 ` Paul Menzel
@ 2012-07-04 13:41 ` Paul Menzel
2012-07-04 13:55 ` Alex Deucher
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2012-07-04 13:41 UTC (permalink / raw)
To: Michel Dänzer; +Cc: dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 2553 bytes --]
Am Samstag, den 30.06.2012, 21:00 +0200 schrieb Paul Menzel:
> Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
> > On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
> > >
> > > resuming from suspend to RAM the monitor was indicating by a blinking
> > > LED that it did not receive any signal. This is the first time this
> > > happened. Resuming from suspend to RAM had worked without problems
> > > before (and probably will work again the next tries).
> > >
> > > Logging in from SSH worked fine though. Switching terminal to tty1
> > > nothing changed but going back to tty7, where X was supposed to run),
> > > and the monitor detected a signal and showed the screensaver.
> > >
> > > Switching to tty1 still does not work though, that means the monitor
> > > indicates that it gets no signal.
> >
> > What about tty2-6 or any others?
>
> It just happened again. tty2–6 also do not show anything.
>
> > What does fbset -i say when the problem occurs?
>
> I logged in over SSH not having switched the ttys yet. This is the
> result.
>
> $ fbset -i
>
> mode "1280x1024"
> geometry 1280 1024 1280 1024 32
> timings 0 0 0 0 0 0 0
> accel true
> rgba 8/16,8/8,8/0,0/0
> endmode
>
> Frame buffer device information:
> Name : radeondrmfb
> Address : 0xd0142000
> Size : 5242880
> Type : PACKED PIXELS
> Visual : TRUECOLOR
> XPanStep : 1
> YPanStep : 1
> YWrapStep : 0
> LineLength : 5120
> Accelerator : No
>
> This does not differ though after having switched between ttys and
> getting a working X server again. The other ttys do not just show black.
> When switching from tty7 with the X server running to a console(?) tty
> then I shortly (half second) see some kind of test image, which contains
> four horizontal colored stripes red, green, blue and white(?).
>
> I could not find anything in the output of `dmesg`, but
> `/var/log/syslog` contains several of the following lines.
>
> Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
> Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
> Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
Does someone have an idea what the problem might be and how to fix it?
Thanks,
Paul
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-07-04 13:41 ` Paul Menzel
@ 2012-07-04 13:55 ` Alex Deucher
2012-07-04 14:11 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Alex Deucher @ 2012-07-04 13:55 UTC (permalink / raw)
To: Paul Menzel; +Cc: Michel Dänzer, dri-devel
On Wed, Jul 4, 2012 at 9:41 AM, Paul Menzel
<paulepanter@users.sourceforge.net> wrote:
> Am Samstag, den 30.06.2012, 21:00 +0200 schrieb Paul Menzel:
>> Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
>> > On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
>> > >
>> > > resuming from suspend to RAM the monitor was indicating by a blinking
>> > > LED that it did not receive any signal. This is the first time this
>> > > happened. Resuming from suspend to RAM had worked without problems
>> > > before (and probably will work again the next tries).
>> > >
>> > > Logging in from SSH worked fine though. Switching terminal to tty1
>> > > nothing changed but going back to tty7, where X was supposed to run),
>> > > and the monitor detected a signal and showed the screensaver.
>> > >
>> > > Switching to tty1 still does not work though, that means the monitor
>> > > indicates that it gets no signal.
>> >
>> > What about tty2-6 or any others?
>>
>> It just happened again. tty2–6 also do not show anything.
>>
>> > What does fbset -i say when the problem occurs?
>>
>> I logged in over SSH not having switched the ttys yet. This is the
>> result.
>>
>> $ fbset -i
>>
>> mode "1280x1024"
>> geometry 1280 1024 1280 1024 32
>> timings 0 0 0 0 0 0 0
>> accel true
>> rgba 8/16,8/8,8/0,0/0
>> endmode
>>
>> Frame buffer device information:
>> Name : radeondrmfb
>> Address : 0xd0142000
>> Size : 5242880
>> Type : PACKED PIXELS
>> Visual : TRUECOLOR
>> XPanStep : 1
>> YPanStep : 1
>> YWrapStep : 0
>> LineLength : 5120
>> Accelerator : No
>>
>> This does not differ though after having switched between ttys and
>> getting a working X server again. The other ttys do not just show black.
>> When switching from tty7 with the X server running to a console(?) tty
>> then I shortly (half second) see some kind of test image, which contains
>> four horizontal colored stripes red, green, blue and white(?).
>>
>> I could not find anything in the output of `dmesg`, but
>> `/var/log/syslog` contains several of the following lines.
>>
>> Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
>> Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
>> Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
>
> Does someone have an idea what the problem might be and how to fix it?
>
Is this a regression? If so can you bisect?
Alex
>
> Thanks,
>
> Paul
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-07-04 13:55 ` Alex Deucher
@ 2012-07-04 14:11 ` Paul Menzel
2012-07-05 12:58 ` Alex Deucher
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2012-07-04 14:11 UTC (permalink / raw)
To: Alex Deucher; +Cc: Michel Dänzer, dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 3173 bytes --]
Am Mittwoch, den 04.07.2012, 09:55 -0400 schrieb Alex Deucher:
> On Wed, Jul 4, 2012 at 9:41 AM, Paul Menzel wrote:
> > Am Samstag, den 30.06.2012, 21:00 +0200 schrieb Paul Menzel:
> >> Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
> >> > On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
> >> > >
> >> > > resuming from suspend to RAM the monitor was indicating by a blinking
> >> > > LED that it did not receive any signal. This is the first time this
> >> > > happened. Resuming from suspend to RAM had worked without problems
> >> > > before (and probably will work again the next tries).
> >> > >
> >> > > Logging in from SSH worked fine though. Switching terminal to tty1
> >> > > nothing changed but going back to tty7, where X was supposed to run),
> >> > > and the monitor detected a signal and showed the screensaver.
> >> > >
> >> > > Switching to tty1 still does not work though, that means the monitor
> >> > > indicates that it gets no signal.
> >> >
> >> > What about tty2-6 or any others?
> >>
> >> It just happened again. tty2–6 also do not show anything.
> >>
> >> > What does fbset -i say when the problem occurs?
> >>
> >> I logged in over SSH not having switched the ttys yet. This is the
> >> result.
> >>
> >> $ fbset -i
> >>
> >> mode "1280x1024"
> >> geometry 1280 1024 1280 1024 32
> >> timings 0 0 0 0 0 0 0
> >> accel true
> >> rgba 8/16,8/8,8/0,0/0
> >> endmode
> >>
> >> Frame buffer device information:
> >> Name : radeondrmfb
> >> Address : 0xd0142000
> >> Size : 5242880
> >> Type : PACKED PIXELS
> >> Visual : TRUECOLOR
> >> XPanStep : 1
> >> YPanStep : 1
> >> YWrapStep : 0
> >> LineLength : 5120
> >> Accelerator : No
> >>
> >> This does not differ though after having switched between ttys and
> >> getting a working X server again. The other ttys do not just show black.
> >> When switching from tty7 with the X server running to a console(?) tty
> >> then I shortly (half second) see some kind of test image, which contains
> >> four horizontal colored stripes red, green, blue and white(?).
> >>
> >> I could not find anything in the output of `dmesg`, but
> >> `/var/log/syslog` contains several of the following lines.
> >>
> >> Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
> >> Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
> >> Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
> >
> > Does someone have an idea what the problem might be and how to fix it?
>
> Is this a regression? If so can you bisect?
I do not think so. But the problem is I just got that board, have only
used it with Linux 3.2.x (from Debian Sid/unstable) and this issue is
not reproducible, that means, it happens in less then 5(?) percent of
the suspend and resume cycles.
Any idea what these acpid messages could mean?
Thanks,
Paul
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-07-04 14:11 ` Paul Menzel
@ 2012-07-05 12:58 ` Alex Deucher
2012-07-06 15:34 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Alex Deucher @ 2012-07-05 12:58 UTC (permalink / raw)
To: Paul Menzel; +Cc: Michel Dänzer, dri-devel
On Wed, Jul 4, 2012 at 10:11 AM, Paul Menzel
<paulepanter@users.sourceforge.net> wrote:
> Am Mittwoch, den 04.07.2012, 09:55 -0400 schrieb Alex Deucher:
>> On Wed, Jul 4, 2012 at 9:41 AM, Paul Menzel wrote:
>> > Am Samstag, den 30.06.2012, 21:00 +0200 schrieb Paul Menzel:
>> >> Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
>> >> > On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
>> >> > >
>> >> > > resuming from suspend to RAM the monitor was indicating by a blinking
>> >> > > LED that it did not receive any signal. This is the first time this
>> >> > > happened. Resuming from suspend to RAM had worked without problems
>> >> > > before (and probably will work again the next tries).
>> >> > >
>> >> > > Logging in from SSH worked fine though. Switching terminal to tty1
>> >> > > nothing changed but going back to tty7, where X was supposed to run),
>> >> > > and the monitor detected a signal and showed the screensaver.
>> >> > >
>> >> > > Switching to tty1 still does not work though, that means the monitor
>> >> > > indicates that it gets no signal.
>> >> >
>> >> > What about tty2-6 or any others?
>> >>
>> >> It just happened again. tty2–6 also do not show anything.
>> >>
>> >> > What does fbset -i say when the problem occurs?
>> >>
>> >> I logged in over SSH not having switched the ttys yet. This is the
>> >> result.
>> >>
>> >> $ fbset -i
>> >>
>> >> mode "1280x1024"
>> >> geometry 1280 1024 1280 1024 32
>> >> timings 0 0 0 0 0 0 0
>> >> accel true
>> >> rgba 8/16,8/8,8/0,0/0
>> >> endmode
>> >>
>> >> Frame buffer device information:
>> >> Name : radeondrmfb
>> >> Address : 0xd0142000
>> >> Size : 5242880
>> >> Type : PACKED PIXELS
>> >> Visual : TRUECOLOR
>> >> XPanStep : 1
>> >> YPanStep : 1
>> >> YWrapStep : 0
>> >> LineLength : 5120
>> >> Accelerator : No
>> >>
>> >> This does not differ though after having switched between ttys and
>> >> getting a working X server again. The other ttys do not just show black.
>> >> When switching from tty7 with the X server running to a console(?) tty
>> >> then I shortly (half second) see some kind of test image, which contains
>> >> four horizontal colored stripes red, green, blue and white(?).
>> >>
>> >> I could not find anything in the output of `dmesg`, but
>> >> `/var/log/syslog` contains several of the following lines.
>> >>
>> >> Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
>> >> Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
>> >> Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
>> >
>> > Does someone have an idea what the problem might be and how to fix it?
>>
>> Is this a regression? If so can you bisect?
>
> I do not think so. But the problem is I just got that board, have only
> used it with Linux 3.2.x (from Debian Sid/unstable) and this issue is
> not reproducible, that means, it happens in less then 5(?) percent of
> the suspend and resume cycles.
>
> Any idea what these acpid messages could mean?
Nope sorry.
Alex
>
>
> Thanks,
>
> Paul
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-07-05 12:58 ` Alex Deucher
@ 2012-07-06 15:34 ` Paul Menzel
2012-07-06 15:39 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2012-07-06 15:34 UTC (permalink / raw)
To: Alex Deucher; +Cc: Michel Dänzer, dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 3683 bytes --]
Am Donnerstag, den 05.07.2012, 08:58 -0400 schrieb Alex Deucher:
> On Wed, Jul 4, 2012 at 10:11 AM, Paul Menzel wrote:
> > Am Mittwoch, den 04.07.2012, 09:55 -0400 schrieb Alex Deucher:
> >> On Wed, Jul 4, 2012 at 9:41 AM, Paul Menzel wrote:
> >> > Am Samstag, den 30.06.2012, 21:00 +0200 schrieb Paul Menzel:
> >> >> Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
> >> >> > On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
> >> >> > >
> >> >> > > resuming from suspend to RAM the monitor was indicating by a blinking
> >> >> > > LED that it did not receive any signal. This is the first time this
> >> >> > > happened. Resuming from suspend to RAM had worked without problems
> >> >> > > before (and probably will work again the next tries).
> >> >> > >
> >> >> > > Logging in from SSH worked fine though. Switching terminal to tty1
> >> >> > > nothing changed but going back to tty7, where X was supposed to run),
> >> >> > > and the monitor detected a signal and showed the screensaver.
> >> >> > >
> >> >> > > Switching to tty1 still does not work though, that means the monitor
> >> >> > > indicates that it gets no signal.
> >> >> >
> >> >> > What about tty2-6 or any others?
> >> >>
> >> >> It just happened again. tty2–6 also do not show anything.
> >> >>
> >> >> > What does fbset -i say when the problem occurs?
> >> >>
> >> >> I logged in over SSH not having switched the ttys yet. This is the
> >> >> result.
> >> >>
> >> >> $ fbset -i
> >> >>
> >> >> mode "1280x1024"
> >> >> geometry 1280 1024 1280 1024 32
> >> >> timings 0 0 0 0 0 0 0
> >> >> accel true
> >> >> rgba 8/16,8/8,8/0,0/0
> >> >> endmode
> >> >>
> >> >> Frame buffer device information:
> >> >> Name : radeondrmfb
> >> >> Address : 0xd0142000
> >> >> Size : 5242880
> >> >> Type : PACKED PIXELS
> >> >> Visual : TRUECOLOR
> >> >> XPanStep : 1
> >> >> YPanStep : 1
> >> >> YWrapStep : 0
> >> >> LineLength : 5120
> >> >> Accelerator : No
> >> >>
> >> >> This does not differ though after having switched between ttys and
> >> >> getting a working X server again. The other ttys do not just show black.
> >> >> When switching from tty7 with the X server running to a console(?) tty
> >> >> then I shortly (half second) see some kind of test image, which contains
> >> >> four horizontal colored stripes red, green, blue and white(?).
> >> >>
> >> >> I could not find anything in the output of `dmesg`, but
> >> >> `/var/log/syslog` contains several of the following lines.
> >> >>
> >> >> Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
> >> >> Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
> >> >> Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
> >> >
> >> > Does someone have an idea what the problem might be and how to fix it?
> >>
> >> Is this a regression? If so can you bisect?
> >
> > I do not think so. But the problem is I just got that board, have only
> > used it with Linux 3.2.x (from Debian Sid/unstable) and this issue is
> > not reproducible, that means, it happens in less then 5(?) percent of
> > the suspend and resume cycles.
> >
> > Any idea what these acpid messages could mean?
It just happened again. This time with the monitor not getting any
signal. Switching to other virtual terminals does not work.
What debug levels should I increase?
Thanks,
Paul
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-07-06 15:34 ` Paul Menzel
@ 2012-07-06 15:39 ` Paul Menzel
2012-08-11 12:17 ` Paul Menzel
0 siblings, 1 reply; 10+ messages in thread
From: Paul Menzel @ 2012-07-06 15:39 UTC (permalink / raw)
To: Alex Deucher; +Cc: Michel Dänzer, dri-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 3936 bytes --]
Am Freitag, den 06.07.2012, 17:34 +0200 schrieb Paul Menzel:
> Am Donnerstag, den 05.07.2012, 08:58 -0400 schrieb Alex Deucher:
> > On Wed, Jul 4, 2012 at 10:11 AM, Paul Menzel wrote:
> > > Am Mittwoch, den 04.07.2012, 09:55 -0400 schrieb Alex Deucher:
> > >> On Wed, Jul 4, 2012 at 9:41 AM, Paul Menzel wrote:
> > >> > Am Samstag, den 30.06.2012, 21:00 +0200 schrieb Paul Menzel:
> > >> >> Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
> > >> >> > On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
> > >> >> > >
> > >> >> > > resuming from suspend to RAM the monitor was indicating by a blinking
> > >> >> > > LED that it did not receive any signal. This is the first time this
> > >> >> > > happened. Resuming from suspend to RAM had worked without problems
> > >> >> > > before (and probably will work again the next tries).
> > >> >> > >
> > >> >> > > Logging in from SSH worked fine though. Switching terminal to tty1
> > >> >> > > nothing changed but going back to tty7, where X was supposed to run),
> > >> >> > > and the monitor detected a signal and showed the screensaver.
> > >> >> > >
> > >> >> > > Switching to tty1 still does not work though, that means the monitor
> > >> >> > > indicates that it gets no signal.
> > >> >> >
> > >> >> > What about tty2-6 or any others?
> > >> >>
> > >> >> It just happened again. tty2–6 also do not show anything.
> > >> >>
> > >> >> > What does fbset -i say when the problem occurs?
> > >> >>
> > >> >> I logged in over SSH not having switched the ttys yet. This is the
> > >> >> result.
> > >> >>
> > >> >> $ fbset -i
> > >> >>
> > >> >> mode "1280x1024"
> > >> >> geometry 1280 1024 1280 1024 32
> > >> >> timings 0 0 0 0 0 0 0
> > >> >> accel true
> > >> >> rgba 8/16,8/8,8/0,0/0
> > >> >> endmode
> > >> >>
> > >> >> Frame buffer device information:
> > >> >> Name : radeondrmfb
> > >> >> Address : 0xd0142000
> > >> >> Size : 5242880
> > >> >> Type : PACKED PIXELS
> > >> >> Visual : TRUECOLOR
> > >> >> XPanStep : 1
> > >> >> YPanStep : 1
> > >> >> YWrapStep : 0
> > >> >> LineLength : 5120
> > >> >> Accelerator : No
> > >> >>
> > >> >> This does not differ though after having switched between ttys and
> > >> >> getting a working X server again. The other ttys do not just show black.
> > >> >> When switching from tty7 with the X server running to a console(?) tty
> > >> >> then I shortly (half second) see some kind of test image, which contains
> > >> >> four horizontal colored stripes red, green, blue and white(?).
> > >> >>
> > >> >> I could not find anything in the output of `dmesg`, but
> > >> >> `/var/log/syslog` contains several of the following lines.
> > >> >>
> > >> >> Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
> > >> >> Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
> > >> >> Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
> > >> >
> > >> > Does someone have an idea what the problem might be and how to fix it?
> > >>
> > >> Is this a regression? If so can you bisect?
> > >
> > > I do not think so. But the problem is I just got that board, have only
> > > used it with Linux 3.2.x (from Debian Sid/unstable) and this issue is
> > > not reproducible, that means, it happens in less then 5(?) percent of
> > > the suspend and resume cycles.
> > >
> > > Any idea what these acpid messages could mean?
>
> It just happened again. This time with the monitor not getting any
> signal. Switching to other virtual terminals does not work.
>
> What debug levels should I increase?
I attach the output of `dmesg`.
Thanks,
Paul
[-- Attachment #1.1.2: 20120706.dmesg --]
[-- Type: text/plain, Size: 77063 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-686-pae (Debian 3.2.21-3) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Jun 28 08:56:46 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfeb0000 - 00000000cfec0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfec0000 - 00000000cfef0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./A780FullHD, BIOS P1.00 08/01/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 368be000 - 37457000
[ 0.000000] ACPI: RSDP 000fa160 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT cfeb0000 00038 (v01 080108 RSDT2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: FACP cfeb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT cfeb0440 07737 (v01 AS146 AS146012 00000012 INTL 20051117)
[ 0.000000] ACPI: FACS cfec0000 00040
[ 0.000000] ACPI: APIC cfeb0390 0006C (v01 080108 APIC2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: MCFG cfeb0400 0003C (v01 080108 OEMMCFG 20080801 MSFT 00000097)
[ 0.000000] ACPI: OEMB cfec0040 00071 (v01 080108 OEMB2148 20080801 MSFT 00000097)
[ 0.000000] ACPI: SSDT cfeb7b80 0028A (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3718MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 982591
[ 0.000000] free_area_init_node: node 0, pgdat c140d640, node_mem_map f44be200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7437 pages used for memmap
[ 0.000000] HighMem zone: 747429 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 973374
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-3-686-pae root=/dev/mapper/speicher-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00120000)
[ 0.000000] Memory: 3875320k/4718592k available (2836k kernel code, 55044k reserved, 1343k data, 412k init, 3019464k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1415000 - 0xc147c000 ( 412 kB)
[ 0.000000] .data : 0xc12c50ec - 0xc1414f00 (1343 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c50ec (2836 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4006000 soft=f4008000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2494.485 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.97 BogoMIPS (lpj=9977940)
[ 0.004011] pid_max: default: 32768 minimum: 301
[ 0.004066] Security Framework initialized
[ 0.004074] AppArmor: AppArmor disabled by boot time parameter
[ 0.004096] Mount-cache hash table entries: 512
[ 0.004257] Initializing cgroup subsys cpuacct
[ 0.004263] Initializing cgroup subsys memory
[ 0.004274] Initializing cgroup subsys devices
[ 0.004277] Initializing cgroup subsys freezer
[ 0.004280] Initializing cgroup subsys net_cls
[ 0.004283] Initializing cgroup subsys blkio
[ 0.004291] Initializing cgroup subsys perf_event
[ 0.004325] CPU: Physical Processor ID: 0
[ 0.004327] CPU: Processor Core ID: 0
[ 0.004330] mce: CPU supports 5 MCE banks
[ 0.004342] using AMD E400 aware idle routine
[ 0.008079] ACPI: Core revision 20110623
[ 0.011129] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.011506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051199] CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02
[ 0.052002] Performance Events: AMD PMU driver.
[ 0.052002] ... version: 0
[ 0.052002] ... bit width: 48
[ 0.052002] ... generic registers: 4
[ 0.052002] ... value mask: 0000ffffffffffff
[ 0.052002] ... max period: 00007fffffffffff
[ 0.052002] ... fixed-purpose events: 0
[ 0.052002] ... event mask: 000000000000000f
[ 0.052002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.052002] CPU 1 irqstacks, hard=f4094000 soft=f4096000
[ 0.052002] Booting Node 0, Processors #1
[ 0.052002] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.136100] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136122] Brought up 2 CPUs
[ 0.136125] Total of 2 processors activated (9978.46 BogoMIPS).
[ 0.136786] devtmpfs: initialized
[ 0.136786] PM: Registering ACPI NVS region at cfec0000 (196608 bytes)
[ 0.136786] print_constraints: dummy:
[ 0.136786] NET: Registered protocol family 16
[ 0.136786] node 0 link 0: io port [1000, ffffff]
[ 0.136786] TOM: 00000000d0000000 aka 3328M
[ 0.136786] node 0 link 0: mmio [a0000, bffff]
[ 0.136786] node 0 link 0: mmio [d0000000, efffffff]
[ 0.136786] node 0 link 0: mmio [f0000000, fddfffff]
[ 0.136786] node 0 link 0: mmio [fde00000, fdefffff]
[ 0.136786] node 0 link 0: mmio [fdf00000, ffefffff]
[ 0.136786] TOM2: 0000000130000000 aka 4864M
[ 0.136786] bus: [00, 07] on node 0 link 0
[ 0.136786] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.136786] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.136786] bus: 00 index 2 [mem 0xd0000000-0xffffffff]
[ 0.136786] bus: 00 index 3 [mem 0x130000000-0xfcffffffff]
[ 0.136786] ACPI: bus type pci registered
[ 0.136786] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.136786] PCI: not using MMCONFIG
[ 0.137208] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.137284] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.137286] PCI: Using configuration type 1 for base access
[ 0.137872] bio: create slab <bio-0> at 0
[ 0.137872] ACPI: Added _OSI(Module Device)
[ 0.137872] ACPI: Added _OSI(Processor Device)
[ 0.137872] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.137872] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.137872] ACPI: EC: Look up EC in DSDT
[ 0.140986] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.156263] ACPI: Interpreter enabled
[ 0.156272] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.156295] ACPI: Using IOAPIC for interrupt routing
[ 0.156317] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.157004] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.157006] PCI: Using MMCONFIG for extended config space
[ 0.161332] ACPI: No dock devices found.
[ 0.161335] HEST: Table not found.
[ 0.161340] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.161522] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.161703] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.161706] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.161709] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.161712] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.161714] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 0.161717] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.161723] pci_root PNP0A03:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000cf000-0x000d0bff])
[ 0.161742] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.161805] pci 0000:00:01.0: [1849:9602] type 1 class 0x000604
[ 0.161856] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.161897] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.161901] pci 0000:00:09.0: PME# disabled
[ 0.161918] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.161957] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.161960] pci 0000:00:0a.0: PME# disabled
[ 0.161990] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.162011] pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
[ 0.162022] pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
[ 0.162033] pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
[ 0.162043] pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
[ 0.162054] pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
[ 0.162065] pci 0000:00:11.0: reg 24: [mem 0xfddff800-0xfddffbff]
[ 0.162128] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.162143] pci 0000:00:12.0: reg 10: [mem 0xfddfe000-0xfddfefff]
[ 0.162215] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.162230] pci 0000:00:12.1: reg 10: [mem 0xfddfd000-0xfddfdfff]
[ 0.162308] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.162329] pci 0000:00:12.2: reg 10: [mem 0xfddff000-0xfddff0ff]
[ 0.162419] pci 0000:00:12.2: supports D1 D2
[ 0.162421] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.162426] pci 0000:00:12.2: PME# disabled
[ 0.162452] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.162467] pci 0000:00:13.0: reg 10: [mem 0xfddfc000-0xfddfcfff]
[ 0.162539] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.162553] pci 0000:00:13.1: reg 10: [mem 0xfddf7000-0xfddf7fff]
[ 0.162632] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.162653] pci 0000:00:13.2: reg 10: [mem 0xfddf6800-0xfddf68ff]
[ 0.162742] pci 0000:00:13.2: supports D1 D2
[ 0.162744] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.162748] pci 0000:00:13.2: PME# disabled
[ 0.162775] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.162886] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.162904] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.162914] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.162925] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.162935] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.162946] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.163010] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.163034] pci 0000:00:14.2: reg 10: [mem 0xfddf0000-0xfddf3fff 64bit]
[ 0.163106] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.163110] pci 0000:00:14.2: PME# disabled
[ 0.163126] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.163210] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.163260] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.163275] pci 0000:00:14.5: reg 10: [mem 0xfddf5000-0xfddf5fff]
[ 0.163349] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.163369] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.163384] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.163400] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.163452] pci 0000:01:05.0: [1002:9610] type 0 class 0x000300
[ 0.163462] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.163467] pci 0000:01:05.0: reg 14: [io 0xc000-0xc0ff]
[ 0.163472] pci 0000:01:05.0: reg 18: [mem 0xfdff0000-0xfdffffff]
[ 0.163484] pci 0000:01:05.0: reg 24: [mem 0xfde00000-0xfdefffff]
[ 0.163503] pci 0000:01:05.0: supports D1 D2
[ 0.163544] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.163548] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.163551] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.163556] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.163584] pci 0000:00:09.0: PCI bridge to [bus 02-03]
[ 0.163588] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.163592] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfeafffff]
[ 0.163596] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.163638] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.163652] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.163675] pci 0000:04:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit pref]
[ 0.163690] pci 0000:04:00.0: reg 20: [mem 0xfcfe0000-0xfcfeffff 64bit pref]
[ 0.163700] pci 0000:04:00.0: reg 30: [mem 0xfebf0000-0xfebfffff pref]
[ 0.163750] pci 0000:04:00.0: supports D1 D2
[ 0.163752] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.163757] pci 0000:04:00.0: PME# disabled
[ 0.168025] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[ 0.168029] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.168032] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.168037] pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.168100] pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.168110] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.168113] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.168116] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.168119] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.168122] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.168136] pci_bus 0000:00: on NUMA node 0
[ 0.168139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.168354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.168398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.168440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.168505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.168636] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.168921] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.173568] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.173609] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.173647] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
[ 0.173685] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.173722] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.173760] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.173798] ACPI: PCI Interrupt Link [LNKG] (IRQs *4 10 11 12 14 15)
[ 0.173835] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.173945] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173945] vgaarb: loaded
[ 0.173945] vgaarb: bridge control possible 0000:01:05.0
[ 0.173945] PCI: Using ACPI for IRQ routing
[ 0.173945] PCI: pci_cache_line_size set to 64 bytes
[ 0.173945] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.173945] reserve RAM buffer: 00000000cfeb0000 - 00000000cfffffff
[ 0.174033] pnp: PnP ACPI init
[ 0.174055] ACPI: bus type pnp registered
[ 0.176166] pnp 00:00: [bus 00-ff]
[ 0.176169] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.176172] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.176174] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.176177] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.176179] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.176182] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[ 0.176184] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.176255] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.176340] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.176343] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.176407] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176449] pnp 00:02: [dma 4]
[ 0.176451] pnp 00:02: [io 0x0000-0x000f]
[ 0.176453] pnp 00:02: [io 0x0081-0x0083]
[ 0.176456] pnp 00:02: [io 0x0087]
[ 0.176458] pnp 00:02: [io 0x0089-0x008b]
[ 0.176460] pnp 00:02: [io 0x008f]
[ 0.176462] pnp 00:02: [io 0x00c0-0x00df]
[ 0.176494] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.176503] pnp 00:03: [io 0x0070-0x0071]
[ 0.176518] pnp 00:03: [irq 8]
[ 0.176547] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.176555] pnp 00:04: [io 0x0061]
[ 0.176585] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.176594] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.176599] pnp 00:05: [irq 13]
[ 0.176630] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.176858] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 0.176889] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.176930] pnp 00:07: [mem 0xfec00000-0xfec00fff]
[ 0.176933] pnp 00:07: [mem 0xfee00000-0xfee00fff]
[ 0.176984] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.176987] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.176990] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177089] pnp 00:08: [io 0x0010-0x001f]
[ 0.177091] pnp 00:08: [io 0x0022-0x003f]
[ 0.177094] pnp 00:08: [io 0x0062-0x0063]
[ 0.177096] pnp 00:08: [io 0x0065-0x006f]
[ 0.177099] pnp 00:08: [io 0x0072-0x007f]
[ 0.177101] pnp 00:08: [io 0x0080]
[ 0.177103] pnp 00:08: [io 0x0084-0x0086]
[ 0.177105] pnp 00:08: [io 0x0088]
[ 0.177107] pnp 00:08: [io 0x008c-0x008e]
[ 0.177109] pnp 00:08: [io 0x0090-0x009f]
[ 0.177112] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.177114] pnp 00:08: [io 0x00b1]
[ 0.177116] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.177118] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.177121] pnp 00:08: [io 0x040b]
[ 0.177122] pnp 00:08: [io 0x04d6]
[ 0.177125] pnp 00:08: [io 0x0c00-0x0c01]
[ 0.177127] pnp 00:08: [io 0x0c14]
[ 0.177129] pnp 00:08: [io 0x0c50-0x0c51]
[ 0.177131] pnp 00:08: [io 0x0c52]
[ 0.177133] pnp 00:08: [io 0x0c6c]
[ 0.177135] pnp 00:08: [io 0x0c6f]
[ 0.177137] pnp 00:08: [io 0x0cd0-0x0cd1]
[ 0.177139] pnp 00:08: [io 0x0cd2-0x0cd3]
[ 0.177141] pnp 00:08: [io 0x0cd4-0x0cd5]
[ 0.177144] pnp 00:08: [io 0x0cd6-0x0cd7]
[ 0.177146] pnp 00:08: [io 0x0cd8-0x0cdf]
[ 0.177148] pnp 00:08: [io 0x0800-0x089f]
[ 0.177151] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.177153] pnp 00:08: [io 0x0b00-0x0b0f]
[ 0.177155] pnp 00:08: [io 0x0b20-0x0b3f]
[ 0.177158] pnp 00:08: [io 0x0900-0x090f]
[ 0.177160] pnp 00:08: [io 0x0910-0x091f]
[ 0.177162] pnp 00:08: [io 0xfe00-0xfefe]
[ 0.177165] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.177167] pnp 00:08: [mem 0xfec10000-0xfec1001f]
[ 0.177250] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.177253] system 00:08: [io 0x040b] has been reserved
[ 0.177256] system 00:08: [io 0x04d6] has been reserved
[ 0.177259] system 00:08: [io 0x0c00-0x0c01] has been reserved
[ 0.177263] system 00:08: [io 0x0c14] has been reserved
[ 0.177266] system 00:08: [io 0x0c50-0x0c51] has been reserved
[ 0.177269] system 00:08: [io 0x0c52] has been reserved
[ 0.177272] system 00:08: [io 0x0c6c] has been reserved
[ 0.177275] system 00:08: [io 0x0c6f] has been reserved
[ 0.177278] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
[ 0.177281] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
[ 0.177284] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
[ 0.177287] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
[ 0.177290] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
[ 0.177293] system 00:08: [io 0x0800-0x089f] has been reserved
[ 0.177296] system 00:08: [io 0x0b00-0x0b0f] has been reserved
[ 0.177299] system 00:08: [io 0x0b20-0x0b3f] has been reserved
[ 0.177302] system 00:08: [io 0x0900-0x090f] has been reserved
[ 0.177304] system 00:08: [io 0x0910-0x091f] has been reserved
[ 0.177308] system 00:08: [io 0xfe00-0xfefe] has been reserved
[ 0.177311] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.177314] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.177317] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177501] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.177504] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.177506] pnp 00:09: [io 0x0290-0x029f]
[ 0.177556] system 00:09: [io 0x0290-0x029f] has been reserved
[ 0.177559] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177589] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.177635] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.177639] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177767] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.177770] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.177773] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.177776] pnp 00:0b: [mem 0x00100000-0xcfefffff]
[ 0.177778] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.177829] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.177832] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.177835] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.177838] system 00:0b: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.177841] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.177844] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.177940] pnp: PnP ACPI: found 12 devices
[ 0.177942] ACPI: ACPI bus type pnp unregistered
[ 0.177946] PnPBIOS: Disabled by ACPI PNP
[ 0.214784] Switching to clocksource acpi_pm
[ 0.214810] PCI: max bus depth: 1 pci_try_num: 2
[ 0.214834] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.214837] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.214841] pci 0000:00:01.0: bridge window [mem 0xfde00000-0xfdffffff]
[ 0.214844] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.214849] pci 0000:00:09.0: PCI bridge to [bus 02-03]
[ 0.214852] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
[ 0.214856] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfeafffff]
[ 0.214860] pci 0000:00:09.0: bridge window [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.214864] pci 0000:00:0a.0: PCI bridge to [bus 04-04]
[ 0.214867] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
[ 0.214871] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.214874] pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.214878] pci 0000:00:14.4: PCI bridge to [bus 05-05]
[ 0.214909] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.214913] pci 0000:00:09.0: setting latency timer to 64
[ 0.214920] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.214924] pci 0000:00:0a.0: setting latency timer to 64
[ 0.214931] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.214934] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.214936] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.214939] pci_bus 0000:00: resource 7 [mem 0xcff00000-0xdfffffff]
[ 0.214942] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.214945] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.214947] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdffffff]
[ 0.214950] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.214953] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.214955] pci_bus 0000:02: resource 1 [mem 0xfe000000-0xfeafffff]
[ 0.214958] pci_bus 0000:02: resource 2 [mem 0xfa000000-0xfcefffff 64bit pref]
[ 0.214961] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.214963] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.214966] pci_bus 0000:04: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
[ 0.214969] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.214971] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.214973] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.214976] pci_bus 0000:05: resource 7 [mem 0xcff00000-0xdfffffff]
[ 0.214978] pci_bus 0000:05: resource 8 [mem 0xf0000000-0xfebfffff]
[ 0.215061] NET: Registered protocol family 2
[ 0.215149] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.215502] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.215502] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.215502] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.215502] TCP reno registered
[ 0.215502] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.215502] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.215502] NET: Registered protocol family 1
[ 0.215502] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.215502] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.316030] pci 0000:00:12.0: PCI INT A disabled
[ 0.316039] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.396026] pci 0000:00:12.1: PCI INT A disabled
[ 0.396036] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.396051] pci 0000:00:12.2: PCI INT B disabled
[ 0.396059] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.476026] pci 0000:00:13.0: PCI INT A disabled
[ 0.476034] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.548024] pci 0000:00:13.1: PCI INT A disabled
[ 0.548037] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.548053] pci 0000:00:13.2: PCI INT B disabled
[ 0.548074] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.620027] pci 0000:00:14.5: PCI INT C disabled
[ 0.620039] pci 0000:01:05.0: Boot video device
[ 0.620045] PCI: CLS 64 bytes, default 64
[ 0.620116] Unpacking initramfs...
[ 0.930065] Freeing initrd memory: 11876k freed
[ 0.940976] audit: initializing netlink socket (disabled)
[ 0.941000] type=2000 audit(1341577644.940:1): initialized
[ 0.966342] highmem bounce pool size: 64 pages
[ 0.966347] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.988747] VFS: Disk quotas dquot_6.5.2
[ 0.988786] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.988863] msgmni has been set to 1694
[ 0.989136] alg: No test for stdrng (krng)
[ 0.989176] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.989180] io scheduler noop registered
[ 0.989182] io scheduler deadline registered
[ 0.989199] io scheduler cfq registered (default)
[ 0.989304] pcieport 0000:00:09.0: setting latency timer to 64
[ 0.989339] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.989393] pcieport 0000:00:0a.0: setting latency timer to 64
[ 0.989419] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.989495] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.989524] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.989527] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.989702] acpiphp: Slot [1] registered
[ 0.989832] ERST: Table is not found!
[ 0.989834] GHES: HEST is not enabled!
[ 0.989847] isapnp: Scanning for PnP cards...
[ 1.343668] isapnp: No Plug & Play device found
[ 1.343762] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.352338] hpet_acpi_add: no address or irqs in _CRS
[ 1.352351] Linux agpgart interface v0.103
[ 1.352739] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.355418] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.355426] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.355529] mousedev: PS/2 mouse device common for all mice
[ 1.355590] rtc_cmos 00:03: RTC can wake from S4
[ 1.355727] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.355756] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.355771] cpuidle: using governor ladder
[ 1.355773] cpuidle: using governor menu
[ 1.356020] TCP cubic registered
[ 1.356073] NET: Registered protocol family 10
[ 1.356617] Mobile IPv6
[ 1.356619] NET: Registered protocol family 17
[ 1.356623] Registering the dns_resolver key type
[ 1.356648] Using IPI No-Shortcut mode
[ 1.356805] PM: Hibernation image not present or could not be loaded.
[ 1.356817] registered taskstats version 1
[ 1.367981] rtc_cmos 00:03: setting system clock to 2012-07-06 12:27:25 UTC (1341577645)
[ 1.368037] Initializing network drop monitor service
[ 1.368168] Freeing unused kernel memory: 412k freed
[ 1.368455] Write protecting the kernel text: 2840k
[ 1.368488] Write protecting the kernel read-only data: 1088k
[ 1.368490] NX-protecting the kernel data: 3304k
[ 1.434717] udevd[52]: starting version 175
[ 1.480982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.481008] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.481037] r8169 0000:04:00.0: setting latency timer to 64
[ 1.481086] r8169 0000:04:00.0: irq 42 for MSI/MSI-X
[ 1.481617] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf820a000, 00:19:66:8b:09:1a, XID 1c4000c0 IRQ 42
[ 1.481621] r8169 0000:04:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 1.508236] usbcore: registered new interface driver usbfs
[ 1.508265] usbcore: registered new interface driver hub
[ 1.508469] SCSI subsystem initialized
[ 1.517659] usbcore: registered new device driver usb
[ 1.518232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.518269] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.518294] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.518326] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.518338] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.518370] QUIRK: Enable AMD PLL fix
[ 1.518373] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.518387] ehci_hcd 0000:00:12.2: debug port 1
[ 1.518418] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfddff000
[ 1.528417] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.528480] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.528483] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.528486] usb usb1: Product: EHCI Host Controller
[ 1.528488] usb usb1: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[ 1.528490] usb usb1: SerialNumber: 0000:00:12.2
[ 1.528636] hub 1-0:1.0: USB hub found
[ 1.528641] hub 1-0:1.0: 6 ports detected
[ 1.528753] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.528788] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.528802] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.528812] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.528839] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.528854] ehci_hcd 0000:00:13.2: debug port 1
[ 1.528891] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfddf6800
[ 1.532930] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.533721] libata version 3.00 loaded.
[ 1.540104] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.540155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.540158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.540161] usb usb2: Product: EHCI Host Controller
[ 1.540163] usb usb2: Manufacturer: Linux 3.2.0-3-686-pae ehci_hcd
[ 1.540165] usb usb2: SerialNumber: 0000:00:13.2
[ 1.541072] hub 2-0:1.0: USB hub found
[ 1.541079] hub 2-0:1.0: 6 ports detected
[ 1.541389] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.541417] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.541431] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.541477] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfddfe000
[ 1.600058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.600063] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.600065] usb usb3: Product: OHCI Host Controller
[ 1.600067] usb usb3: Manufacturer: Linux 3.2.0-3-686-pae ohci_hcd
[ 1.600069] usb usb3: SerialNumber: 0000:00:12.0
[ 1.600231] hub 3-0:1.0: USB hub found
[ 1.600240] hub 3-0:1.0: 3 ports detected
[ 1.600336] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.600361] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.600371] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.600394] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfddfd000
[ 1.660035] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.660038] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.660040] usb usb4: Product: OHCI Host Controller
[ 1.660042] usb usb4: Manufacturer: Linux 3.2.0-3-686-pae ohci_hcd
[ 1.660044] usb usb4: SerialNumber: 0000:00:12.1
[ 1.660175] hub 4-0:1.0: USB hub found
[ 1.660182] hub 4-0:1.0: 3 ports detected
[ 1.660504] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.660519] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.660526] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.660556] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfddfc000
[ 1.720032] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.720035] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.720038] usb usb5: Product: OHCI Host Controller
[ 1.720040] usb usb5: Manufacturer: Linux 3.2.0-3-686-pae ohci_hcd
[ 1.720042] usb usb5: SerialNumber: 0000:00:13.0
[ 1.720182] hub 5-0:1.0: USB hub found
[ 1.720189] hub 5-0:1.0: 3 ports detected
[ 1.720863] ahci 0000:00:11.0: version 3.0
[ 1.720894] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.721096] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.721099] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.722730] scsi0 : ahci
[ 1.722871] scsi1 : ahci
[ 1.722950] scsi2 : ahci
[ 1.723028] scsi3 : ahci
[ 1.723127] scsi4 : ahci
[ 1.723207] scsi5 : ahci
[ 1.723274] ata1: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff900 irq 22
[ 1.723278] ata2: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddff980 irq 22
[ 1.723282] ata3: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa00 irq 22
[ 1.723286] ata4: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffa80 irq 22
[ 1.723290] ata5: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb00 irq 22
[ 1.723294] ata6: SATA max UDMA/133 abar m1024@0xfddff800 port 0xfddffb80 irq 22
[ 1.723385] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.723445] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.723801] scsi6 : pata_atiixp
[ 1.723894] scsi7 : pata_atiixp
[ 1.724570] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.724573] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.724630] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.724656] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.724677] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.724704] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfddf7000
[ 1.784046] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.784049] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.784051] usb usb6: Product: OHCI Host Controller
[ 1.784053] usb usb6: Manufacturer: Linux 3.2.0-3-686-pae ohci_hcd
[ 1.784055] usb usb6: SerialNumber: 0000:00:13.1
[ 1.784246] hub 6-0:1.0: USB hub found
[ 1.784253] hub 6-0:1.0: 3 ports detected
[ 1.784330] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.784342] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.784350] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.784369] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfddf5000
[ 1.844049] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.844053] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.844055] usb usb7: Product: OHCI Host Controller
[ 1.844057] usb usb7: Manufacturer: Linux 3.2.0-3-686-pae ohci_hcd
[ 1.844059] usb usb7: SerialNumber: 0000:00:14.5
[ 1.844205] hub 7-0:1.0: USB hub found
[ 1.844211] hub 7-0:1.0: 2 ports detected
[ 1.896577] ata8.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
[ 1.896584] ata8.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33
[ 1.912510] ata8.00: configured for UDMA/33
[ 1.928425] ata8.01: configured for UDMA/33
[ 2.040050] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.040085] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.040163] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.044033] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.104024] usb 3-3: new low-speed USB device number 2 using ohci_hcd
[ 2.212031] ata2: softreset failed (device not ready)
[ 2.212070] ata2: applying PMP SRST workaround and retrying
[ 2.212088] ata1: softreset failed (device not ready)
[ 2.212128] ata1: applying PMP SRST workaround and retrying
[ 2.269089] usb 3-3: New USB device found, idVendor=1241, idProduct=1122
[ 2.269092] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.384056] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.384082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.384420] ata1.00: ATA-9: M4-CT256M4SSD2, 0309, max UDMA/100
[ 2.384423] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.384797] ata1.00: configured for UDMA/100
[ 2.384989] scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 0309 PQ: 0 ANSI: 5
[ 2.390523] ata2.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100
[ 2.390526] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.396483] ata2.00: configured for UDMA/100
[ 2.396590] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARS-60M 51.0 PQ: 0 ANSI: 5
[ 2.417734] scsi 7:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
[ 2.421553] scsi 7:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5
[ 2.435144] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.435207] sd 0:0:0:0: [sda] Write Protect is off
[ 2.435210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.435228] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.435960] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.435963] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.436035] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.436038] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.436055] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.437380] sda: sda1 sda2 sda3
[ 2.437729] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.439959] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.439965] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.440173] sr 7:0:0:0: Attached scsi CD-ROM sr0
[ 2.441474] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input0
[ 2.441608] generic-usb 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-3/input0
[ 2.441631] usbcore: registered new interface driver usbhid
[ 2.441633] usbhid: USB HID core driver
[ 2.448302] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.448638] sr 7:0:1:0: Attached scsi CD-ROM sr1
[ 2.451218] sdb: sdb1 sdb2
[ 2.451559] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.532044] usb 4-1: new low-speed USB device number 2 using ohci_hcd
[ 2.705091] usb 4-1: New USB device found, idVendor=046d, idProduct=c30f
[ 2.705096] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.705099] usb 4-1: Product: Logitech USB Keyboard
[ 2.705101] usb 4-1: Manufacturer: Logitech
[ 2.713455] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input1
[ 2.713625] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-1/input0
[ 2.725263] md: raid1 personality registered for level 1
[ 2.726211] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/input/input2
[ 2.726316] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.1-1/input1
[ 2.804070] mdadm: sending ioctl 800c0910 to a partition!
[ 2.804074] mdadm: sending ioctl 800c0910 to a partition!
[ 2.804090] mdadm: sending ioctl 1261 to a partition!
[ 2.804093] mdadm: sending ioctl 1261 to a partition!
[ 2.804298] mdadm: sending ioctl 1261 to a partition!
[ 2.804300] mdadm: sending ioctl 1261 to a partition!
[ 2.804433] mdadm: sending ioctl 1261 to a partition!
[ 2.804436] mdadm: sending ioctl 1261 to a partition!
[ 2.804551] mdadm: sending ioctl 1261 to a partition!
[ 2.804553] mdadm: sending ioctl 1261 to a partition!
[ 2.808396] md: md0 stopped.
[ 2.809273] md: bind<sdb1>
[ 2.810926] bio: create slab <bio-1> at 1
[ 2.811000] md/raid1:md0: active with 1 out of 2 mirrors
[ 2.811032] md0: detected capacity change from 0 to 509804544
[ 2.812792] md0: unknown partition table
[ 2.875651] md: md1 stopped.
[ 2.877544] md: bind<sdb2>
[ 2.879363] md/raid1:md1: active with 1 out of 2 mirrors
[ 2.879396] md1: detected capacity change from 0 to 1999886286848
[ 2.881536] md1: unknown partition table
[ 2.885507] device-mapper: uevent: version 1.0.3
[ 2.885591] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 53.094184] scsi_verify_blk_ioctl: 84 callbacks suppressed
[ 53.094189] mdadm: sending ioctl 1261 to a partition!
[ 53.094192] mdadm: sending ioctl 1261 to a partition!
[ 53.871783] fstype: sending ioctl 540f to a partition!
[ 53.981783] PM: Starting manual resume from disk
[ 53.981788] PM: Hibernation image partition 253:2 present
[ 53.981790] PM: Looking for hibernation image.
[ 53.982072] PM: Image not found (code -22)
[ 53.982076] PM: Hibernation image not present or could not be loaded.
[ 53.991690] kjournald starting. Commit interval 5 seconds
[ 53.991722] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 55.238915] udevd[438]: starting version 175
[ 55.639123] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 55.639132] ACPI: Power Button [PWRB]
[ 55.639217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 55.639220] ACPI: Power Button [PWRF]
[ 55.656114] wmi: Mapper loaded
[ 55.690525] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 55.708652] udevd[465]: renamed network interface eth0 to eth3
[ 55.760234] powernow-k8: Found 1 AMD Athlon(tm) Dual Core Processor 4850e (2 cpu cores) (version 2.20.00)
[ 55.760292] powernow-k8: fid 0x11 (2500 MHz), vid 0xe
[ 55.760294] powernow-k8: fid 0x10 (2400 MHz), vid 0xf
[ 55.760296] powernow-k8: fid 0xe (2200 MHz), vid 0x11
[ 55.760298] powernow-k8: fid 0xc (2000 MHz), vid 0x13
[ 55.760300] powernow-k8: fid 0xa (1800 MHz), vid 0x15
[ 55.760302] powernow-k8: fid 0x2 (1000 MHz), vid 0x16
[ 55.933332] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 56.013151] mdadm: sending ioctl 1261 to a partition!
[ 56.013160] mdadm: sending ioctl 1261 to a partition!
[ 56.013882] mdadm: sending ioctl 1261 to a partition!
[ 56.013892] mdadm: sending ioctl 1261 to a partition!
[ 56.159642] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 56.159656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 56.199378] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 56.199554] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 56.267682] [drm] Initialized drm 1.1.0 20060810
[ 56.754799] [drm] radeon kernel modesetting enabled.
[ 56.755027] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 56.755038] radeon 0000:01:05.0: setting latency timer to 64
[ 56.755660] [drm] initializing kernel modesetting (RS780 0x1002:0x9610 0x1849:0x9610).
[ 56.755716] [drm] register mmio base: 0xFDFF0000
[ 56.755721] [drm] register mmio size: 65536
[ 56.764521] ATOM BIOS: ASROCK
[ 56.764575] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 56.764582] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 56.765286] [drm] Detected VRAM RAM=256M, BAR=256M
[ 56.765296] [drm] RAM width 32bits DDR
[ 56.765440] [TTM] Zone kernel: Available graphics memory: 434072 kiB.
[ 56.765445] [TTM] Zone highmem: Available graphics memory: 1943804 kiB.
[ 56.765450] [TTM] Initializing pool allocator.
[ 56.765512] [drm] radeon: 256M of VRAM memory ready
[ 56.765517] [drm] radeon: 512M of GTT memory ready.
[ 56.765554] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 56.765559] [drm] Driver supports precise vblank timestamp query.
[ 56.765588] [drm] radeon: irq initialized.
[ 56.765600] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 56.769872] [drm] Loading RS780 Microcode
[ 56.889411] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 56.935113] mdadm: sending ioctl 800c0910 to a partition!
[ 56.935126] mdadm: sending ioctl 800c0910 to a partition!
[ 56.935149] mdadm: sending ioctl 1261 to a partition!
[ 57.010754] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 57.010876] radeon 0000:01:05.0: WB enabled
[ 57.042357] [drm] ring test succeeded in 1 usecs
[ 57.042717] [drm] radeon: ib pool ready.
[ 57.042871] [drm] ib test succeeded in 0 usecs
[ 57.044640] [drm] Radeon Display Connectors
[ 57.044647] [drm] Connector 0:
[ 57.044651] [drm] VGA
[ 57.044657] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 57.044662] [drm] Encoders:
[ 57.044665] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 57.044669] [drm] Connector 1:
[ 57.044673] [drm] DVI-D
[ 57.044676] [drm] HPD3
[ 57.044681] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 57.044686] [drm] Encoders:
[ 57.044689] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 57.044733] [drm] radeon: power management initialized
[ 57.143530] [drm] fb mappable at 0xD0142000
[ 57.143535] [drm] vram apper at 0xD0000000
[ 57.143539] [drm] size 5242880
[ 57.143542] [drm] fb depth is 24
[ 57.143546] [drm] pitch is 5120
[ 57.143705] fbcon: radeondrmfb (fb0) is primary device
[ 57.187078] Console: switching to colour frame buffer device 160x64
[ 57.206048] fb0: radeondrmfb frame buffer device
[ 57.206053] drm: registered panic notifier
[ 57.206066] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[ 57.917436] EXT3-fs (dm-1): using internal journal
[ 59.044677] fuse init (API version 7.17)
[ 59.136442] loop: module loaded
[ 59.197768] w83627ehf: Found W83627EHG chip at 0x290
[ 59.327620] kvm: Nested Virtualization enabled
[ 59.510210] scsi_verify_blk_ioctl: 33 callbacks suppressed
[ 59.510218] mdadm: sending ioctl 800c0910 to a partition!
[ 59.510230] mdadm: sending ioctl 1261 to a partition!
[ 59.520181] mdadm: sending ioctl 1261 to a partition!
[ 59.520600] mdadm: sending ioctl 1261 to a partition!
[ 59.534846] mdadm: sending ioctl 1261 to a partition!
[ 59.535722] mdadm: sending ioctl 1261 to a partition!
[ 59.535954] mdadm: sending ioctl 1261 to a partition!
[ 59.604981] mdadm: sending ioctl 800c0910 to a partition!
[ 59.604996] mdadm: sending ioctl 1261 to a partition!
[ 59.614923] mdadm: sending ioctl 1261 to a partition!
[ 61.332587] Adding 4194300k swap on /dev/mapper/speicher-swap. Priority:-1 extents:1 across:4194300k
[ 63.606743] kjournald starting. Commit interval 5 seconds
[ 63.638864] EXT3-fs (md0): using internal journal
[ 63.638877] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 63.745682] kjournald starting. Commit interval 5 seconds
[ 63.809331] EXT3-fs (dm-6): using internal journal
[ 63.809346] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[ 64.096407] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 64.096942] SGI XFS Quota Management subsystem
[ 64.140449] XFS (dm-7): Mounting Filesystem
[ 64.380160] XFS (dm-7): Ending clean mount
[ 64.402685] XFS (dm-8): Mounting Filesystem
[ 64.764518] XFS (dm-8): Ending clean mount
[ 64.828428] REISERFS (device dm-5): found reiserfs format "3.6" with standard journal
[ 64.828450] REISERFS (device dm-5): using ordered data mode
[ 64.828456] reiserfs: using flush barriers
[ 64.838182] REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 64.839637] REISERFS (device dm-5): checking transaction log (dm-5)
[ 64.952634] REISERFS (device dm-5): Using r5 hash to sort names
[ 65.004403] kjournald starting. Commit interval 5 seconds
[ 65.004877] EXT3-fs (dm-3): using internal journal
[ 65.004889] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 65.037068] kjournald starting. Commit interval 5 seconds
[ 65.037530] EXT3-fs (dm-4): using internal journal
[ 65.037541] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 89.531034] postgres (2085): /proc/2085/oom_adj is deprecated, please use /proc/2085/oom_score_adj instead.
[ 102.454521] r8169 0000:04:00.0: eth3: link down
[ 102.454543] r8169 0000:04:00.0: eth3: link down
[ 102.455049] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 104.131381] r8169 0000:04:00.0: eth3: link up
[ 104.131770] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[ 106.298595] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 106.390084] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 114.928034] eth3: no IPv6 routers present
[ 184.448047] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 184.581655] usb 2-4: New USB device found, idVendor=0204, idProduct=6025
[ 184.581660] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 184.581663] usb 2-4: Product: Flash Disk
[ 184.581665] usb 2-4: SerialNumber: 00CCCBB99999
[ 184.679403] usbcore: registered new interface driver uas
[ 184.684826] Initializing USB Mass Storage driver...
[ 184.684987] scsi8 : usb-storage 2-4:1.0
[ 184.685119] usbcore: registered new interface driver usb-storage
[ 184.685122] USB Mass Storage support registered.
[ 185.684840] scsi 8:0:0:0: Direct-Access Flash Disk 5.00 PQ: 0 ANSI: 2
[ 185.689940] sd 8:0:0:0: [sdc] 2065920 512-byte logical blocks: (1.05 GB/1008 MiB)
[ 185.690406] sd 8:0:0:0: [sdc] Write Protect is off
[ 185.690414] sd 8:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 185.690906] sd 8:0:0:0: [sdc] No Caching mode page present
[ 185.690914] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 185.698155] sd 8:0:0:0: [sdc] No Caching mode page present
[ 185.698168] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 185.699346] sdc: sdc1
[ 185.702034] sd 8:0:0:0: [sdc] No Caching mode page present
[ 185.702043] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 185.702051] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 189.878078] colord-sane[4227]: segfault at be ip b55efdf6 sp b716904c error 4 in libdbus-1.so.3.7.2[b55dc000+49000]
[ 368.733131] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 387.435662] sdc: detected capacity change from 1057751040 to 0
[ 939.286200] usb 2-4: USB disconnect, device number 2
[ 941.660054] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 941.793609] usb 2-4: New USB device found, idVendor=0204, idProduct=6025
[ 941.793615] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 941.793618] usb 2-4: Product: Flash Disk
[ 941.793620] usb 2-4: SerialNumber: 00CCCBB99999
[ 941.793964] scsi9 : usb-storage 2-4:1.0
[ 942.792647] scsi 9:0:0:0: Direct-Access Flash Disk 5.00 PQ: 0 ANSI: 2
[ 942.795866] sd 9:0:0:0: [sdc] 2065920 512-byte logical blocks: (1.05 GB/1008 MiB)
[ 942.796364] sd 9:0:0:0: [sdc] Write Protect is off
[ 942.796367] sd 9:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[ 942.796863] sd 9:0:0:0: [sdc] No Caching mode page present
[ 942.796868] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 942.803115] sd 9:0:0:0: [sdc] No Caching mode page present
[ 942.803123] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 942.804265] sdc: sdc1
[ 942.814238] sd 9:0:0:0: [sdc] No Caching mode page present
[ 942.814246] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[ 942.814250] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[ 943.068239] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 7531.500964] ata2: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x7
[ 7531.500978] ata2: SError: { HostInt }
[ 7531.500990] ata2: hard resetting link
[ 7531.992053] ata2: softreset failed (device not ready)
[ 7531.992067] ata2: applying PMP SRST workaround and retrying
[ 7532.164073] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7532.176364] ata2.00: configured for UDMA/100
[ 7532.192095] ata2: EH complete
[ 7534.142898] PM: Syncing filesystems ... done.
[ 7534.429111] PM: Preparing system for mem sleep
[ 7534.464468] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 7534.480064] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 7534.496029] PM: Entering mem sleep
[ 7534.496067] Suspending console(s) (use no_console_suspend to debug)
[ 7534.496535] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 7534.496626] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 7534.496914] sd 1:0:0:0: [sdb] Stopping disk
[ 7534.497441] r8169 0000:04:00.0: eth3: link down
[ 7534.509575] sd 0:0:0:0: [sda] Stopping disk
[ 7534.513113] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 7534.513198] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 7534.513207] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 7534.528032] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 7534.564063] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 7534.576094] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 7534.576114] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 7534.576131] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 7534.663494] radeon 0000:01:05.0: PCI INT A disabled
[ 7534.820083] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 7535.172360] ahci 0000:00:11.0: PCI INT A disabled
[ 7535.188056] PM: suspend of devices complete after 691.758 msecs
[ 7535.188282] r8169 0000:04:00.0: PME# enabled
[ 7535.188293] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 7535.204138] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 7535.204238] ehci_hcd 0000:00:13.2: PME# enabled
[ 7535.204242] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 7535.220056] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 7535.220083] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 7535.220115] ehci_hcd 0000:00:12.2: PME# enabled
[ 7535.220119] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 7535.236041] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 7535.236068] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 7535.236127] PM: late suspend of devices complete after 48.066 msecs
[ 7535.236259] ACPI: Preparing to enter system sleep state S3
[ 7535.636274] PM: Saving platform NVS memory
[ 7535.636962] Disabling non-boot CPUs ...
[ 7535.740019] CPU 1 is now offline
[ 7535.740640] ACPI: Low-level resume complete
[ 7535.740640] PM: Restoring platform NVS memory
[ 7535.740640] Enabling non-boot CPUs ...
[ 7535.740640] Booting Node 0 Processor 1 APIC 0x1
[ 7535.740640] smpboot cpu 1: start_ip = 9b000
[ 7535.638290] Initializing CPU#1
[ 7535.638290] Calibrating delay loop (skipped) already calibrated this CPU
[ 7535.752434] NMI watchdog enabled, takes one hw-pmu counter.
[ 7535.752665] CPU1 is up
[ 7535.753287] ACPI: Waking up from system sleep state S3
[ 7535.753773] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 7535.753804] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 7535.753829] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 7535.753885] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 7535.753913] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 7535.768034] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 7535.768063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 7535.768078] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 7535.768083] ehci_hcd 0000:00:12.2: PME# disabled
[ 7535.768110] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 7535.768138] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 7535.784029] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 7535.784058] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 7535.784072] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 7535.784077] ehci_hcd 0000:00:13.2: PME# disabled
[ 7535.784130] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 7535.784168] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 7535.784249] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 7535.784275] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 7535.784286] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 7535.784290] radeon 0000:01:05.0: restoring config space at offset 0x1 (was 0x40100107, writing 0x100107)
[ 7535.784316] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 7535.784324] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 7535.784330] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 7535.784339] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 7535.784507] PM: early resume of devices complete after 30.812 msecs
[ 7535.784602] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7535.784692] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7535.784750] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7535.784876] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7535.784895] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7535.784906] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7535.784921] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7535.784934] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7535.784950] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7535.784960] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7535.784986] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7535.784990] radeon 0000:01:05.0: setting latency timer to 64
[ 7535.789265] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 7535.789271] r8169 0000:04:00.0: PME# disabled
[ 7535.793201] sd 0:0:0:0: [sda] Starting disk
[ 7535.793252] sd 1:0:0:0: [sdb] Starting disk
[ 7535.808227] r8169 0000:04:00.0: eth3: link down
[ 7535.814221] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 7535.814691] radeon 0000:01:05.0: WB enabled
[ 7535.845617] [drm] ring test succeeded in 1 usecs
[ 7535.845630] [drm] ib test succeeded in 0 usecs
[ 7535.948503] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 7535.948507] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 7535.948511] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 7535.956505] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 7535.956509] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 7535.956513] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 7535.964440] ata8.00: configured for UDMA/33
[ 7535.980439] ata8.01: configured for UDMA/33
[ 7535.996035] usb 2-4: reset high-speed USB device number 3 using ehci_hcd
[ 7536.104050] ata5: SATA link down (SStatus 0 SControl 300)
[ 7536.104083] ata4: SATA link down (SStatus 0 SControl 300)
[ 7536.104114] ata3: SATA link down (SStatus 0 SControl 300)
[ 7536.104150] ata6: SATA link down (SStatus 0 SControl 300)
[ 7536.360029] ata1: softreset failed (device not ready)
[ 7536.360032] ata1: applying PMP SRST workaround and retrying
[ 7536.532044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7536.532744] ata1.00: configured for UDMA/100
[ 7537.836664] r8169 0000:04:00.0: eth3: link up
[ 7545.796022] ata2: softreset failed (device not ready)
[ 7548.864018] ata2: softreset failed (device not ready)
[ 7548.864021] ata2: applying PMP SRST workaround and retrying
[ 7549.036029] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7549.048129] ata2.00: configured for UDMA/100
[ 7549.093163] PM: resume of devices complete after 13308.621 msecs
[ 7549.093677] PM: Finishing wakeup.
[ 7549.093678] Restarting tasks ... done.
[ 8383.363803] PM: Syncing filesystems ... done.
[ 8383.866421] PM: Preparing system for mem sleep
[ 8383.924385] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 8383.940071] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 8383.956037] PM: Entering mem sleep
[ 8383.956072] Suspending console(s) (use no_console_suspend to debug)
[ 8383.956504] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 8383.956589] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 8383.956874] sd 1:0:0:0: [sdb] Stopping disk
[ 8383.957394] r8169 0000:04:00.0: eth3: link down
[ 8383.958901] sd 0:0:0:0: [sda] Stopping disk
[ 8383.960090] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 8383.960404] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 8383.972147] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 8383.972157] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 8383.988039] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 8384.024031] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 8384.036048] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 8384.036075] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 8384.036100] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 8384.097648] radeon 0000:01:05.0: PCI INT A disabled
[ 8384.612845] ahci 0000:00:11.0: PCI INT A disabled
[ 8384.628062] PM: suspend of devices complete after 671.772 msecs
[ 8384.628283] r8169 0000:04:00.0: PME# enabled
[ 8384.628295] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 8384.644148] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 8384.644248] ehci_hcd 0000:00:13.2: PME# enabled
[ 8384.644252] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 8384.660053] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 8384.660080] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 8384.660112] ehci_hcd 0000:00:12.2: PME# enabled
[ 8384.660116] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 8384.676053] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 8384.676079] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 8384.676176] PM: late suspend of devices complete after 48.108 msecs
[ 8384.676302] ACPI: Preparing to enter system sleep state S3
[ 8385.076280] PM: Saving platform NVS memory
[ 8385.076702] Disabling non-boot CPUs ...
[ 8385.180016] CPU 1 is now offline
[ 8385.180583] ACPI: Low-level resume complete
[ 8385.180583] PM: Restoring platform NVS memory
[ 8385.180583] Enabling non-boot CPUs ...
[ 8385.180583] Booting Node 0 Processor 1 APIC 0x1
[ 8385.180583] smpboot cpu 1: start_ip = 9b000
[ 8385.078061] Initializing CPU#1
[ 8385.078061] Calibrating delay loop (skipped) already calibrated this CPU
[ 8385.192346] NMI watchdog enabled, takes one hw-pmu counter.
[ 8385.192578] CPU1 is up
[ 8385.193185] ACPI: Waking up from system sleep state S3
[ 8385.193673] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8385.193704] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8385.193729] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 8385.193786] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 8385.193814] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 8385.208052] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 8385.208081] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 8385.208097] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 8385.208102] ehci_hcd 0000:00:12.2: PME# disabled
[ 8385.208129] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 8385.208156] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 8385.224032] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 8385.224061] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 8385.224076] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 8385.224080] ehci_hcd 0000:00:13.2: PME# disabled
[ 8385.224134] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 8385.224172] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 8385.224252] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 8385.224278] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 8385.224289] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 8385.224316] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 8385.224324] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 8385.224330] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 8385.224339] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8385.224505] PM: early resume of devices complete after 30.911 msecs
[ 8385.224600] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8385.224643] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8385.224697] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8385.224747] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8385.224844] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8385.224866] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8385.224890] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8385.224902] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8385.224914] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8385.224930] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8385.224954] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 8385.224960] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8385.224962] r8169 0000:04:00.0: PME# disabled
[ 8385.224966] radeon 0000:01:05.0: setting latency timer to 64
[ 8385.232940] sd 0:0:0:0: [sda] Starting disk
[ 8385.232996] sd 1:0:0:0: [sdb] Starting disk
[ 8385.244157] r8169 0000:04:00.0: eth3: link down
[ 8385.254313] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 8385.254807] radeon 0000:01:05.0: WB enabled
[ 8385.285739] [drm] ring test succeeded in 1 usecs
[ 8385.285752] [drm] ib test succeeded in 0 usecs
[ 8385.392501] ata8.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 8385.392505] ata8.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 8385.392509] ata8.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 8385.400504] ata8.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 8385.400508] ata8.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 8385.400511] ata8.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8385.408441] ata8.00: configured for UDMA/33
[ 8385.424456] ata8.01: configured for UDMA/33
[ 8385.436064] usb 2-4: reset high-speed USB device number 3 using ehci_hcd
[ 8385.544057] ata4: SATA link down (SStatus 0 SControl 300)
[ 8385.544089] ata6: SATA link down (SStatus 0 SControl 300)
[ 8385.544119] ata5: SATA link down (SStatus 0 SControl 300)
[ 8385.544156] ata3: SATA link down (SStatus 0 SControl 300)
[ 8385.800034] ata1: softreset failed (device not ready)
[ 8385.800038] ata1: applying PMP SRST workaround and retrying
[ 8385.972037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8385.972736] ata1.00: configured for UDMA/100
[ 8387.335281] r8169 0000:04:00.0: eth3: link up
[ 8395.236021] ata2: softreset failed (device not ready)
[ 8398.584018] ata2: softreset failed (device not ready)
[ 8398.584022] ata2: applying PMP SRST workaround and retrying
[ 8398.756029] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8398.768233] ata2.00: configured for UDMA/100
[ 8398.811217] PM: resume of devices complete after 13586.678 msecs
[ 8398.811697] PM: Finishing wakeup.
[ 8398.811699] Restarting tasks ... done.
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Linux 3.2: After resume screen only turned on after switching terminals
2012-07-06 15:39 ` Paul Menzel
@ 2012-08-11 12:17 ` Paul Menzel
0 siblings, 0 replies; 10+ messages in thread
From: Paul Menzel @ 2012-08-11 12:17 UTC (permalink / raw)
To: Alex Deucher; +Cc: Michel Dänzer, dri-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 4583 bytes --]
Am Freitag, den 06.07.2012, 17:39 +0200 schrieb Paul Menzel:
> Am Freitag, den 06.07.2012, 17:34 +0200 schrieb Paul Menzel:
> > Am Donnerstag, den 05.07.2012, 08:58 -0400 schrieb Alex Deucher:
> > > On Wed, Jul 4, 2012 at 10:11 AM, Paul Menzel wrote:
> > > > Am Mittwoch, den 04.07.2012, 09:55 -0400 schrieb Alex Deucher:
> > > >> On Wed, Jul 4, 2012 at 9:41 AM, Paul Menzel wrote:
> > > >> > Am Samstag, den 30.06.2012, 21:00 +0200 schrieb Paul Menzel:
> > > >> >> Am Dienstag, den 26.06.2012, 07:42 +0200 schrieb Michel Dänzer:
> > > >> >> > On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote:
> > > >> >> > >
> > > >> >> > > resuming from suspend to RAM the monitor was indicating by a blinking
> > > >> >> > > LED that it did not receive any signal. This is the first time this
> > > >> >> > > happened. Resuming from suspend to RAM had worked without problems
> > > >> >> > > before (and probably will work again the next tries).
> > > >> >> > >
> > > >> >> > > Logging in from SSH worked fine though. Switching terminal to tty1
> > > >> >> > > nothing changed but going back to tty7, where X was supposed to run),
> > > >> >> > > and the monitor detected a signal and showed the screensaver.
> > > >> >> > >
> > > >> >> > > Switching to tty1 still does not work though, that means the monitor
> > > >> >> > > indicates that it gets no signal.
> > > >> >> >
> > > >> >> > What about tty2-6 or any others?
> > > >> >>
> > > >> >> It just happened again. tty2–6 also do not show anything.
> > > >> >>
> > > >> >> > What does fbset -i say when the problem occurs?
> > > >> >>
> > > >> >> I logged in over SSH not having switched the ttys yet. This is the
> > > >> >> result.
> > > >> >>
> > > >> >> $ fbset -i
> > > >> >>
> > > >> >> mode "1280x1024"
> > > >> >> geometry 1280 1024 1280 1024 32
> > > >> >> timings 0 0 0 0 0 0 0
> > > >> >> accel true
> > > >> >> rgba 8/16,8/8,8/0,0/0
> > > >> >> endmode
> > > >> >>
> > > >> >> Frame buffer device information:
> > > >> >> Name : radeondrmfb
> > > >> >> Address : 0xd0142000
> > > >> >> Size : 5242880
> > > >> >> Type : PACKED PIXELS
> > > >> >> Visual : TRUECOLOR
> > > >> >> XPanStep : 1
> > > >> >> YPanStep : 1
> > > >> >> YWrapStep : 0
> > > >> >> LineLength : 5120
> > > >> >> Accelerator : No
> > > >> >>
> > > >> >> This does not differ though after having switched between ttys and
> > > >> >> getting a working X server again. The other ttys do not just show black.
> > > >> >> When switching from tty7 with the X server running to a console(?) tty
> > > >> >> then I shortly (half second) see some kind of test image, which contains
> > > >> >> four horizontal colored stripes red, green, blue and white(?).
> > > >> >>
> > > >> >> I could not find anything in the output of `dmesg`, but
> > > >> >> `/var/log/syslog` contains several of the following lines.
> > > >> >>
> > > >> >> Jun 29 19:44:57 debian-host acpid: client 8677[0:0] has disconnected
> > > >> >> Jun 29 19:45:08 debian-host acpid: client connected from 8677[0:0]
> > > >> >> Jun 29 19:45:08 debian-host acpid: 1 client rule loaded
> > > >> >
> > > >> > Does someone have an idea what the problem might be and how to fix it?
> > > >>
> > > >> Is this a regression? If so can you bisect?
> > > >
> > > > I do not think so. But the problem is I just got that board, have only
> > > > used it with Linux 3.2.x (from Debian Sid/unstable) and this issue is
> > > > not reproducible, that means, it happens in less then 5(?) percent of
> > > > the suspend and resume cycles.
> > > >
> > > > Any idea what these acpid messages could mean?
> >
> > It just happened again. This time with the monitor not getting any
> > signal. Switching to other virtual terminals does not work.
> >
> > What debug levels should I increase?
>
> I attach the output of `dmesg`.
Yesterday it finally happened again. After resume the monitor stayed
black. Only switching virtual consoles with Ctrl + Alt + F6 and back
fixed this. This is the time for the resume.
[ 8688.180746] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] disconnected
[ 9069.400626] PM: Syncing filesystems ... done.
Please find the output of `dmesg` and `drm.debug=0x06` attached.
Thanks,
Paul
[-- Attachment #1.1.2: 20120810--dmesg-resume-black-screen --]
[-- Type: text/plain, Size: 126994 bytes --]
[ 8673.624413] calling usb3+ @ 21003, parent: 0000:00:12.0
[ 8673.624417] initcall usb3_i+ returned 0 after 1 usecs
[ 8673.624421] calling usb2+ @ 21003, parent: 0000:00:13.2
[ 8673.624426] initcall usb2_i+ returned 0 after 1 usecs
[ 8673.624430] calling usb1+ @ 21003, parent: 0000:00:12.2
[ 8673.624435] initcall usb1_i+ returned 0 after 1 usecs
[ 8673.624442] calling serio1+ @ 21003, parent: i8042
[ 8673.624447] initcall serio1_i+ returned 0 after 1 usecs
[ 8673.624450] calling serio0+ @ 21003, parent: i8042
[ 8673.624454] initcall serio0_i+ returned 0 after 1 usecs
[ 8673.624457] calling i8042+ @ 21003, parent: platform
[ 8673.624462] initcall i8042_i+ returned 0 after 1 usecs
[ 8673.624467] calling serial8250+ @ 21003, parent: platform
[ 8673.624473] initcall serial8250_i+ returned 0 after 1 usecs
[ 8673.624479] calling alarmtimer+ @ 21003, parent: platform
[ 8673.624484] initcall alarmtimer_i+ returned 0 after 1 usecs
[ 8673.624487] calling pcspkr+ @ 21003, parent: platform
[ 8673.624492] initcall pcspkr_i+ returned 0 after 1 usecs
[ 8673.624528] calling 0000:04:00.0+ @ 21003, parent: 0000:00:0a.0
[ 8673.624573] r8169 0000:04:00.0: PME# enabled
[ 8673.624588] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 8673.640108] initcall 0000:04:00.0_i+ returned 0 after 15210 usecs
[ 8673.640111] calling 0000:01:05.0+ @ 21003, parent: 0000:00:01.0
[ 8673.640116] initcall 0000:01:05.0_i+ returned 0 after 1 usecs
[ 8673.640119] calling 0000:00:18.3+ @ 21003, parent: pci0000:00
[ 8673.640128] initcall 0000:00:18.3_i+ returned 0 after 5 usecs
[ 8673.640131] calling 0000:00:18.2+ @ 21003, parent: pci0000:00
[ 8673.640139] initcall 0000:00:18.2_i+ returned 0 after 4 usecs
[ 8673.640142] calling 0000:00:18.1+ @ 21003, parent: pci0000:00
[ 8673.640150] initcall 0000:00:18.1_i+ returned 0 after 4 usecs
[ 8673.640152] calling 0000:00:18.0+ @ 21003, parent: pci0000:00
[ 8673.640162] initcall 0000:00:18.0_i+ returned 0 after 5 usecs
[ 8673.640164] calling 0000:00:14.5+ @ 21003, parent: pci0000:00
[ 8673.640193] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 8673.640197] initcall 0000:00:14.5_i+ returned 0 after 28 usecs
[ 8673.640200] calling 0000:00:14.4+ @ 21003, parent: pci0000:00
[ 8673.640226] initcall 0000:00:14.4_i+ returned 0 after 21 usecs
[ 8673.640229] calling 0000:00:14.3+ @ 21003, parent: pci0000:00
[ 8673.640255] initcall 0000:00:14.3_i+ returned 0 after 22 usecs
[ 8673.640257] calling 0000:00:14.2+ @ 21003, parent: pci0000:00
[ 8673.640263] initcall 0000:00:14.2_i+ returned 0 after 1 usecs
[ 8673.640265] calling 0000:00:14.1+ @ 21003, parent: pci0000:00
[ 8673.640271] initcall 0000:00:14.1_i+ returned 0 after 1 usecs
[ 8673.640273] calling 0000:00:14.0+ @ 21003, parent: pci0000:00
[ 8673.640302] initcall 0000:00:14.0_i+ returned 0 after 25 usecs
[ 8673.640305] calling 0000:00:13.2+ @ 21003, parent: pci0000:00
[ 8673.640339] ehci_hcd 0000:00:13.2: PME# enabled
[ 8673.640343] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 8673.656031] initcall 0000:00:13.2_i+ returned 0 after 15353 usecs
[ 8673.656033] calling 0000:00:13.1+ @ 21003, parent: pci0000:00
[ 8673.656061] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 8673.656065] initcall 0000:00:13.1_i+ returned 0 after 27 usecs
[ 8673.656068] calling 0000:00:13.0+ @ 21003, parent: pci0000:00
[ 8673.656095] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 8673.656099] initcall 0000:00:13.0_i+ returned 0 after 27 usecs
[ 8673.656101] calling 0000:00:12.2+ @ 21003, parent: pci0000:00
[ 8673.656135] ehci_hcd 0000:00:12.2: PME# enabled
[ 8673.656139] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 8673.672026] initcall 0000:00:12.2_i+ returned 0 after 15547 usecs
[ 8673.672029] calling 0000:00:12.1+ @ 21003, parent: pci0000:00
[ 8673.672057] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 8673.672061] initcall 0000:00:12.1_i+ returned 0 after 27 usecs
[ 8673.672064] calling 0000:00:12.0+ @ 21003, parent: pci0000:00
[ 8673.672091] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 8673.672096] initcall 0000:00:12.0_i+ returned 0 after 27 usecs
[ 8673.672098] calling 0000:00:11.0+ @ 21003, parent: pci0000:00
[ 8673.672104] initcall 0000:00:11.0_i+ returned 0 after 1 usecs
[ 8673.672106] calling 0000:00:0a.0+ @ 21003, parent: pci0000:00
[ 8673.672132] initcall 0000:00:0a.0_i+ returned 0 after 21 usecs
[ 8673.672135] calling 0000:00:09.0+ @ 21003, parent: pci0000:00
[ 8673.672160] initcall 0000:00:09.0_i+ returned 0 after 21 usecs
[ 8673.672162] calling 0000:00:01.0+ @ 21003, parent: pci0000:00
[ 8673.672177] initcall 0000:00:01.0_i+ returned 0 after 10 usecs
[ 8673.672179] calling 0000:00:00.0+ @ 21003, parent: pci0000:00
[ 8673.672196] initcall 0000:00:00.0_i+ returned 0 after 12 usecs
[ 8673.672230] calling reg-dummy+ @ 21003, parent: platform
[ 8673.672236] initcall reg-dummy_i+ returned 0 after 1 usecs
[ 8673.672241] PM: late suspend of devices complete after 48.189 msecs
[ 8673.672357] ACPI: Preparing to enter system sleep state S3
[ 8674.072281] PM: Saving platform NVS memory
[ 8674.072744] Disabling non-boot CPUs ...
[ 8674.176016] CPU 1 is now offline
[ 8674.176615] PM: Calling kvm_suspend+0x0/0x13 [kvm]
[ 8674.176624] PM: Calling irq_gc_suspend+0x0/0x2e
[ 8674.176628] PM: Calling timekeeping_suspend+0x0/0xc3
[ 8674.176667] PM: Calling save_ioapic_entries+0x0/0x52
[ 8674.176732] PM: Calling mce_syscore_suspend+0x0/0x2
[ 8674.176738] PM: Calling i8259A_suspend+0x0/0x1c
[ 8674.176746] PM: Calling cpufreq_bp_suspend+0x0/0x46
[ 8674.176750] PM: Calling lapic_suspend+0x0/0xfd
[ 8674.176750] ACPI: Low-level resume complete
[ 8674.176750] PM: Restoring platform NVS memory
[ 8674.176750] PM: Calling lapic_resume+0x0/0x169
[ 8674.176750] PM: Calling cpufreq_bp_resume+0x0/0x49
[ 8674.176750] PM: Calling i8259A_resume+0x0/0x1e
[ 8674.176750] PM: Calling i8237A_resume+0x0/0x84
[ 8674.176750] PM: Calling mce_syscore_resume+0x0/0x16
[ 8674.176750] PM: Calling ioapic_resume+0x0/0x6c
[ 8674.176750] PM: Calling timekeeping_resume+0x0/0xc0
[ 8674.176750] PM: Calling irq_gc_resume+0x0/0x2f
[ 8674.176750] PM: Calling irq_pm_syscore_resume+0x0/0x7
[ 8674.176750] PM: Calling irqrouter_resume+0x0/0x32
[ 8674.176750] PM: Calling kvm_resume+0x0/0x27 [kvm]
[ 8674.176750] Enabling non-boot CPUs ...
[ 8674.176750] Booting Node 0 Processor 1 APIC 0x1
[ 8674.176750] smpboot cpu 1: start_ip = 9b000
[ 8674.074116] Initializing CPU#1
[ 8674.074116] Calibrating delay loop (skipped) already calibrated this CPU
[ 8674.188491] NMI watchdog enabled, takes one hw-pmu counter.
[ 8674.188725] CPU1 is up
[ 8674.189347] ACPI: Waking up from system sleep state S3
[ 8674.189753] calling reg-dummy+ @ 21003, parent: platform
[ 8674.189759] initcall reg-dummy_i+ returned 0 after 2 usecs
[ 8674.189787] calling 0000:00:00.0+ @ 21003, parent: pci0000:00
[ 8674.189816] initcall 0000:00:00.0_i+ returned 0 after 24 usecs
[ 8674.189818] calling 0000:00:01.0+ @ 21003, parent: pci0000:00
[ 8674.189836] initcall 0000:00:01.0_i+ returned 0 after 13 usecs
[ 8674.189839] calling 0000:00:09.0+ @ 21003, parent: pci0000:00
[ 8674.189859] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8674.189878] initcall 0000:00:09.0_i+ returned 0 after 34 usecs
[ 8674.189881] calling 0000:00:0a.0+ @ 21003, parent: pci0000:00
[ 8674.189898] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8674.189914] initcall 0000:00:0a.0_i+ returned 0 after 29 usecs
[ 8674.189917] calling 0000:00:11.0+ @ 21003, parent: pci0000:00
[ 8674.189932] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 8674.189963] initcall 0000:00:11.0_i+ returned 0 after 41 usecs
[ 8674.189966] calling 0000:00:12.0+ @ 21003, parent: pci0000:00
[ 8674.189997] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 8674.190002] initcall 0000:00:12.0_i+ returned 0 after 31 usecs
[ 8674.190005] calling 0000:00:12.1+ @ 21003, parent: pci0000:00
[ 8674.190034] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 8674.190038] initcall 0000:00:12.1_i+ returned 0 after 28 usecs
[ 8674.190041] calling 0000:00:12.2+ @ 21003, parent: pci0000:00
[ 8674.204033] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 8674.204063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 8674.204079] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 8674.204084] ehci_hcd 0000:00:12.2: PME# disabled
[ 8674.204088] initcall 0000:00:12.2_i+ returned 0 after 13712 usecs
[ 8674.204091] calling 0000:00:13.0+ @ 21003, parent: pci0000:00
[ 8674.204120] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 8674.204124] initcall 0000:00:13.0_i+ returned 0 after 28 usecs
[ 8674.204127] calling 0000:00:13.1+ @ 21003, parent: pci0000:00
[ 8674.204156] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 8674.204160] initcall 0000:00:13.1_i+ returned 0 after 28 usecs
[ 8674.204163] calling 0000:00:13.2+ @ 21003, parent: pci0000:00
[ 8674.220028] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 8674.220058] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 8674.220074] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 8674.220079] ehci_hcd 0000:00:13.2: PME# disabled
[ 8674.220083] initcall 0000:00:13.2_i+ returned 0 after 15542 usecs
[ 8674.220085] calling 0000:00:14.0+ @ 21003, parent: pci0000:00
[ 8674.220120] initcall 0000:00:14.0_i+ returned 0 after 30 usecs
[ 8674.220123] calling 0000:00:14.1+ @ 21003, parent: pci0000:00
[ 8674.220149] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 8674.220163] initcall 0000:00:14.1_i+ returned 0 after 35 usecs
[ 8674.220165] calling 0000:00:14.2+ @ 21003, parent: pci0000:00
[ 8674.220195] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 8674.220207] initcall 0000:00:14.2_i+ returned 0 after 36 usecs
[ 8674.220210] calling 0000:00:14.3+ @ 21003, parent: pci0000:00
[ 8674.220238] initcall 0000:00:14.3_i+ returned 0 after 24 usecs
[ 8674.220241] calling 0000:00:14.4+ @ 21003, parent: pci0000:00
[ 8674.220269] initcall 0000:00:14.4_i+ returned 0 after 23 usecs
[ 8674.220272] calling 0000:00:14.5+ @ 21003, parent: pci0000:00
[ 8674.220301] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 8674.220305] initcall 0000:00:14.5_i+ returned 0 after 28 usecs
[ 8674.220308] calling 0000:00:18.0+ @ 21003, parent: pci0000:00
[ 8674.220318] initcall 0000:00:18.0_i+ returned 0 after 6 usecs
[ 8674.220320] calling 0000:00:18.1+ @ 21003, parent: pci0000:00
[ 8674.220329] initcall 0000:00:18.1_i+ returned 0 after 5 usecs
[ 8674.220332] calling 0000:00:18.2+ @ 21003, parent: pci0000:00
[ 8674.220341] initcall 0000:00:18.2_i+ returned 0 after 5 usecs
[ 8674.220343] calling 0000:00:18.3+ @ 21003, parent: pci0000:00
[ 8674.220354] initcall 0000:00:18.3_i+ returned 0 after 6 usecs
[ 8674.220357] calling 0000:01:05.0+ @ 21003, parent: 0000:00:01.0
[ 8674.220366] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 8674.220377] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 8674.220388] initcall 0000:01:05.0_i+ returned 0 after 27 usecs
[ 8674.220391] calling 0000:04:00.0+ @ 21003, parent: 0000:00:0a.0
[ 8674.220413] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 8674.220421] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 8674.220428] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 8674.220438] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 8674.220469] initcall 0000:04:00.0_i+ returned 0 after 72 usecs
[ 8674.220504] calling pcspkr+ @ 21003, parent: platform
[ 8674.220509] initcall pcspkr_i+ returned 0 after 1 usecs
[ 8674.220512] calling alarmtimer+ @ 21003, parent: platform
[ 8674.220517] initcall alarmtimer_i+ returned 0 after 1 usecs
[ 8674.220524] calling serial8250+ @ 21003, parent: platform
[ 8674.220529] initcall serial8250_i+ returned 0 after 1 usecs
[ 8674.220534] calling i8042+ @ 21003, parent: platform
[ 8674.220540] initcall i8042_i+ returned 0 after 1 usecs
[ 8674.220543] calling serio0+ @ 21003, parent: i8042
[ 8674.220548] initcall serio0_i+ returned 0 after 1 usecs
[ 8674.220550] calling serio1+ @ 21003, parent: i8042
[ 8674.220555] initcall serio1_i+ returned 0 after 1 usecs
[ 8674.220562] calling usb1+ @ 21003, parent: 0000:00:12.2
[ 8674.220567] initcall usb1_i+ returned 0 after 1 usecs
[ 8674.220571] calling usb2+ @ 21003, parent: 0000:00:13.2
[ 8674.220576] initcall usb2_i+ returned 0 after 1 usecs
[ 8674.220580] calling usb3+ @ 21003, parent: 0000:00:12.0
[ 8674.220585] initcall usb3_i+ returned 0 after 1 usecs
[ 8674.220590] calling usb4+ @ 21003, parent: 0000:00:12.1
[ 8674.220595] initcall usb4_i+ returned 0 after 1 usecs
[ 8674.220599] calling usb5+ @ 21003, parent: 0000:00:13.0
[ 8674.220604] initcall usb5_i+ returned 0 after 1 usecs
[ 8674.220614] calling host0+ @ 21003, parent: 0000:00:14.1
[ 8674.220619] initcall host0_i+ returned 0 after 1 usecs
[ 8674.220622] calling host1+ @ 21003, parent: 0000:00:14.1
[ 8674.220627] initcall host1_i+ returned 0 after 1 usecs
[ 8674.220644] calling host2+ @ 21003, parent: 0000:00:11.0
[ 8674.220649] initcall host2_i+ returned 0 after 1 usecs
[ 8674.220652] calling host3+ @ 21003, parent: 0000:00:11.0
[ 8674.220657] initcall host3_i+ returned 0 after 1 usecs
[ 8674.220660] calling host4+ @ 21003, parent: 0000:00:11.0
[ 8674.220665] initcall host4_i+ returned 0 after 1 usecs
[ 8674.220668] calling host5+ @ 21003, parent: 0000:00:11.0
[ 8674.220673] initcall host5_i+ returned 0 after 1 usecs
[ 8674.220676] calling host6+ @ 21003, parent: 0000:00:11.0
[ 8674.220681] initcall host6_i+ returned 0 after 1 usecs
[ 8674.220684] calling host7+ @ 21003, parent: 0000:00:11.0
[ 8674.220689] initcall host7_i+ returned 0 after 1 usecs
[ 8674.220692] calling usb6+ @ 21003, parent: 0000:00:13.1
[ 8674.220697] initcall usb6_i+ returned 0 after 1 usecs
[ 8674.220701] calling usb7+ @ 21003, parent: 0000:00:14.5
[ 8674.220706] initcall usb7_i+ returned 0 after 1 usecs
[ 8674.220709] calling target1:0:0+ @ 21003, parent: host1
[ 8674.220714] initcall target1:0:0_i+ returned 0 after 1 usecs
[ 8674.220717] calling 1:0:0:0+ @ 21003, parent: target1:0:0
[ 8674.220722] initcall 1:0:0:0_i+ returned 0 after 1 usecs
[ 8674.220725] calling target1:0:1+ @ 21003, parent: host1
[ 8674.220730] initcall target1:0:1_i+ returned 0 after 1 usecs
[ 8674.220733] calling 1:0:1:0+ @ 21003, parent: target1:0:1
[ 8674.220738] initcall 1:0:1:0_i+ returned 0 after 1 usecs
[ 8674.220741] calling 3-3+ @ 21003, parent: usb3
[ 8674.220746] initcall 3-3_i+ returned 0 after 1 usecs
[ 8674.220750] calling target2:0:0+ @ 21003, parent: host2
[ 8674.220754] initcall target2:0:0_i+ returned 0 after 1 usecs
[ 8674.220757] calling 2:0:0:0+ @ 21003, parent: target2:0:0
[ 8674.220762] initcall 2:0:0:0_i+ returned 0 after 1 usecs
[ 8674.220766] calling target3:0:0+ @ 21003, parent: host3
[ 8674.220771] initcall target3:0:0_i+ returned 0 after 1 usecs
[ 8674.220773] calling 3:0:0:0+ @ 21003, parent: target3:0:0
[ 8674.220779] initcall 3:0:0:0_i+ returned 0 after 1 usecs
[ 8674.220785] calling input0+ @ 21003, parent: 3-3:1.0
[ 8674.220791] initcall input0_i+ returned 0 after 1 usecs
[ 8674.220797] calling 4-1+ @ 21003, parent: usb4
[ 8674.220802] initcall 4-1_i+ returned 0 after 1 usecs
[ 8674.220806] calling input1+ @ 21003, parent: 4-1:1.0
[ 8674.220811] initcall input1_i+ returned 0 after 1 usecs
[ 8674.220815] calling input2+ @ 21003, parent: 4-1:1.1
[ 8674.220819] initcall input2_i+ returned 0 after 1 usecs
[ 8674.220833] calling input3+ @ 21003, parent: PNP0C0C:00
[ 8674.220838] initcall input3_i+ returned 0 after 1 usecs
[ 8674.220841] calling input4+ @ 21003, parent: LNXPWRBN:00
[ 8674.220846] initcall input4_i+ returned 0 after 1 usecs
[ 8674.220855] calling SP5100 TCO timer+ @ 21003, parent: platform
[ 8674.220860] initcall SP5100 TCO timer_i+ returned 0 after 1 usecs
[ 8674.220865] calling i2c-0+ @ 21003, parent: none
[ 8674.220870] initcall i2c-0_i+ returned 0 after 1 usecs
[ 8674.220873] calling i2c-1+ @ 21003, parent: none
[ 8674.220878] initcall i2c-1_i+ returned 0 after 1 usecs
[ 8674.220880] calling i2c-2+ @ 21003, parent: none
[ 8674.220885] initcall i2c-2_i+ returned 0 after 1 usecs
[ 8674.220888] calling i2c-3+ @ 21003, parent: none
[ 8674.220893] initcall i2c-3_i+ returned 0 after 1 usecs
[ 8674.220896] calling i2c-4+ @ 21003, parent: none
[ 8674.220901] initcall i2c-4_i+ returned 0 after 1 usecs
[ 8674.220916] calling w83627ehf.656+ @ 21003, parent: platform
[ 8674.220922] initcall w83627ehf.656_i+ returned 0 after 1 usecs
[ 8674.220933] PM: early resume of devices complete after 31.182 msecs
[ 8674.220994] calling 0000:00:00.0+ @ 21385
[ 8674.221003] call 0000:00:00.0+ returned 0 after 3 usecs
[ 8674.221007] calling 0000:00:01.0+ @ 21385
[ 8674.221020] call 0000:00:01.0+ returned 0 after 9 usecs
[ 8674.221024] calling 0000:00:09.0+ @ 21385
[ 8674.221031] call 0000:00:09.0+ returned 0 after 3 usecs
[ 8674.221035] calling 0000:00:0a.0+ @ 21385
[ 8674.221042] call 0000:00:0a.0+ returned 0 after 2 usecs
[ 8674.221045] calling 0000:00:11.0+ @ 21385
[ 8674.221047] calling reg-dummy+ @ 21003
[ 8674.221052] call reg-dummy+ returned 0 after 1 usecs
[ 8674.221058] calling LNXSYSTM:00+ @ 21003
[ 8674.221064] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8674.221067] call LNXSYSTM:00+ returned 0 after 1 usecs
[ 8674.221069] calling LNXCPU:00+ @ 21003
[ 8674.221079] call LNXCPU:00+ returned 0 after 4 usecs
[ 8674.221081] calling LNXCPU:01+ @ 21003
[ 8674.221091] call LNXCPU:01+ returned 0 after 4 usecs
[ 8674.221093] calling LNXCPU:02+ @ 21003
[ 8674.221102] call LNXCPU:02+ returned 0 after 4 usecs
[ 8674.221105] calling LNXCPU:03+ @ 21003
[ 8674.221114] call LNXCPU:03+ returned 0 after 4 usecs
[ 8674.221116] calling device:00+ @ 21003
[ 8674.221123] call device:00+ returned 0 after 2 usecs
[ 8674.221126] calling PNP0A03:00+ @ 21003
[ 8674.221133] call PNP0A03:00+ returned 0 after 2 usecs
[ 8674.221135] calling device:01+ @ 21003
[ 8674.221142] call device:01+ returned 0 after 2 usecs
[ 8674.221144] calling PNP0C02:00+ @ 21003
[ 8674.221149] call PNP0C02:00+ returned 0 after 1 usecs
[ 8674.221152] calling device:02+ @ 21003
[ 8674.221163] call device:02+ returned 0 after 1 usecs
[ 8674.221170] call 0000:00:11.0+ returned 0 after 117 usecs
[ 8674.221174] calling 0000:00:12.0+ @ 21385
[ 8674.221182] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8674.221201] calling 0000:00:12.1+ @ 21383
[ 8674.221210] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8674.221303] calling 0000:00:12.2+ @ 21367
[ 8674.221313] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8674.221322] calling device:03+ @ 21003
[ 8674.221327] call device:03+ returned 0 after 1 usecs
[ 8674.221329] calling device:04+ @ 21003
[ 8674.221333] calling 0000:00:13.0+ @ 21362
[ 8674.221335] call device:04+ returned 0 after 1 usecs
[ 8674.221338] calling device:05+ @ 21003
[ 8674.221342] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8674.221345] call device:05+ returned 0 after 1 usecs
[ 8674.221347] calling device:06+ @ 21003
[ 8674.221356] call device:06+ returned 0 after 4 usecs
[ 8674.221358] calling device:07+ @ 21003
[ 8674.221362] calling 0000:00:13.1+ @ 21361
[ 8674.221364] call device:07+ returned 0 after 1 usecs
[ 8674.221367] calling device:08+ @ 21003
[ 8674.221372] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8674.221374] call device:08+ returned 0 after 1 usecs
[ 8674.221377] calling device:09+ @ 21003
[ 8674.221385] call device:09+ returned 0 after 4 usecs
[ 8674.221389] calling 0000:00:13.2+ @ 21366
[ 8674.221396] calling 0000:00:14.0+ @ 21360
[ 8674.221400] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8674.221402] call 0000:00:14.0+ returned 0 after 2 usecs
[ 8674.221406] calling 0000:00:14.1+ @ 21360
[ 8674.221416] calling 0000:00:14.2+ @ 19677
[ 8674.221420] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8674.221427] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8674.221436] call 0000:00:14.1+ returned 0 after 25 usecs
[ 8674.221440] calling 0000:00:14.3+ @ 21360
[ 8674.221445] call 0000:00:14.3+ returned 0 after 1 usecs
[ 8674.221448] calling 0000:00:14.4+ @ 21360
[ 8674.221454] call 0000:00:14.2+ returned 0 after 33 usecs
[ 8674.221459] calling 0000:00:14.5+ @ 19677
[ 8674.221460] call 0000:00:14.4+ returned 0 after 6 usecs
[ 8674.221464] calling 0000:00:18.0+ @ 21360
[ 8674.221469] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8674.221471] call 0000:00:18.0+ returned 0 after 1 usecs
[ 8674.221474] calling 0000:00:18.1+ @ 21360
[ 8674.221481] call 0000:00:18.1+ returned 0 after 3 usecs
[ 8674.221485] calling 0000:00:18.2+ @ 21384
[ 8674.221487] calling 0000:00:18.3+ @ 21360
[ 8674.221491] call 0000:00:18.2+ returned 0 after 1 usecs
[ 8674.221493] call 0000:00:18.3+ returned 0 after 1 usecs
[ 8674.221497] calling 0000:01:05.0+ @ 21384
[ 8674.221499] calling 0000:04:00.0+ @ 21360
[ 8674.221508] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8674.221511] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 8674.221516] radeon 0000:01:05.0: setting latency timer to 64
[ 8674.221518] r8169 0000:04:00.0: PME# disabled
[ 8674.225095] call 0000:04:00.0+ returned 0 after 3507 usecs
[ 8674.225195] calling device:0a+ @ 21003
[ 8674.225201] call device:0a+ returned 0 after 1 usecs
[ 8674.225203] calling device:0b+ @ 21003
[ 8674.225208] call device:0b+ returned 0 after 1 usecs
[ 8674.225211] calling device:0c+ @ 21003
[ 8674.225216] call device:0c+ returned 0 after 1 usecs
[ 8674.225218] calling device:0d+ @ 21003
[ 8674.225223] call device:0d+ returned 0 after 1 usecs
[ 8674.225226] calling device:0e+ @ 21003
[ 8674.225230] call device:0e+ returned 0 after 1 usecs
[ 8674.225233] calling device:0f+ @ 21003
[ 8674.225238] call device:0f+ returned 0 after 1 usecs
[ 8674.225240] calling device:10+ @ 21003
[ 8674.225245] call device:10+ returned 0 after 1 usecs
[ 8674.225248] calling device:11+ @ 21003
[ 8674.225252] call device:11+ returned 0 after 1 usecs
[ 8674.225255] calling device:12+ @ 21003
[ 8674.225260] call device:12+ returned 0 after 1 usecs
[ 8674.225262] calling device:13+ @ 21003
[ 8674.225267] call device:13+ returned 0 after 1 usecs
[ 8674.225270] calling device:14+ @ 21003
[ 8674.225275] call device:14+ returned 0 after 1 usecs
[ 8674.225277] calling device:15+ @ 21003
[ 8674.225282] call device:15+ returned 0 after 1 usecs
[ 8674.225285] calling PNP0000:00+ @ 21003
[ 8674.225290] call PNP0000:00+ returned 0 after 1 usecs
[ 8674.225293] calling PNP0200:00+ @ 21003
[ 8674.225297] call PNP0200:00+ returned 0 after 1 usecs
[ 8674.225300] calling PNP0100:00+ @ 21003
[ 8674.225305] call PNP0100:00+ returned 0 after 1 usecs
[ 8674.225307] calling PNP0B00:00+ @ 21003
[ 8674.225312] call PNP0B00:00+ returned 0 after 1 usecs
[ 8674.225315] calling PNP0800:00+ @ 21003
[ 8674.225320] call PNP0800:00+ returned 0 after 1 usecs
[ 8674.225322] calling PNP0C04:00+ @ 21003
[ 8674.225327] call PNP0C04:00+ returned 0 after 1 usecs
[ 8674.225330] calling PNP0103:00+ @ 21003
[ 8674.225335] call PNP0103:00+ returned 0 after 1 usecs
[ 8674.225337] calling PNP0C02:01+ @ 21003
[ 8674.225342] call PNP0C02:01+ returned 0 after 1 usecs
[ 8674.225345] calling PNP0C02:02+ @ 21003
[ 8674.225350] call PNP0C02:02+ returned 0 after 1 usecs
[ 8674.225352] calling PNP0501:00+ @ 21003
[ 8674.225357] call PNP0501:00+ returned 0 after 1 usecs
[ 8674.225360] calling PNP0C02:03+ @ 21003
[ 8674.225365] call PNP0C02:03+ returned 0 after 1 usecs
[ 8674.225367] calling PNP0C02:04+ @ 21003
[ 8674.225372] call PNP0C02:04+ returned 0 after 1 usecs
[ 8674.225375] calling device:16+ @ 21003
[ 8674.225380] call device:16+ returned 0 after 1 usecs
[ 8674.225382] calling device:17+ @ 21003
[ 8674.225387] call device:17+ returned 0 after 1 usecs
[ 8674.225390] calling device:18+ @ 21003
[ 8674.225395] call device:18+ returned 0 after 1 usecs
[ 8674.225397] calling device:19+ @ 21003
[ 8674.225402] call device:19+ returned 0 after 1 usecs
[ 8674.225405] calling device:1a+ @ 21003
[ 8674.225410] call device:1a+ returned 0 after 1 usecs
[ 8674.225412] calling device:1b+ @ 21003
[ 8674.225417] call device:1b+ returned 0 after 1 usecs
[ 8674.225419] calling device:1c+ @ 21003
[ 8674.225424] call device:1c+ returned 0 after 1 usecs
[ 8674.225427] calling device:1d+ @ 21003
[ 8674.225432] call device:1d+ returned 0 after 1 usecs
[ 8674.225434] calling device:1e+ @ 21003
[ 8674.225439] call device:1e+ returned 0 after 1 usecs
[ 8674.225442] calling device:1f+ @ 21003
[ 8674.225447] call device:1f+ returned 0 after 1 usecs
[ 8674.225449] calling device:20+ @ 21003
[ 8674.225454] call device:20+ returned 0 after 1 usecs
[ 8674.225457] calling PNP0C01:00+ @ 21003
[ 8674.225462] call PNP0C01:00+ returned 0 after 1 usecs
[ 8674.225464] calling PNP0C0C:00+ @ 21003
[ 8674.225470] call PNP0C0C:00+ returned 0 after 2 usecs
[ 8674.225472] calling PNP0C0F:00+ @ 21003
[ 8674.225477] call PNP0C0F:00+ returned 0 after 1 usecs
[ 8674.225480] calling PNP0C0F:01+ @ 21003
[ 8674.225485] call PNP0C0F:01+ returned 0 after 1 usecs
[ 8674.225487] calling PNP0C0F:02+ @ 21003
[ 8674.225492] call PNP0C0F:02+ returned 0 after 1 usecs
[ 8674.225495] calling PNP0C0F:03+ @ 21003
[ 8674.225500] call PNP0C0F:03+ returned 0 after 1 usecs
[ 8674.225502] calling PNP0C0F:04+ @ 21003
[ 8674.225507] call PNP0C0F:04+ returned 0 after 1 usecs
[ 8674.225510] calling PNP0C0F:05+ @ 21003
[ 8674.225515] call PNP0C0F:05+ returned 0 after 1 usecs
[ 8674.225517] calling PNP0C0F:06+ @ 21003
[ 8674.225522] call PNP0C0F:06+ returned 0 after 1 usecs
[ 8674.225525] calling PNP0C0F:07+ @ 21003
[ 8674.225530] call PNP0C0F:07+ returned 0 after 1 usecs
[ 8674.225532] calling device:21+ @ 21003
[ 8674.225537] call device:21+ returned 0 after 1 usecs
[ 8674.225540] calling PNP0C14:00+ @ 21003
[ 8674.225545] call PNP0C14:00+ returned 0 after 1 usecs
[ 8674.225547] calling LNXPWRBN:00+ @ 21003
[ 8674.225552] call LNXPWRBN:00+ returned 0 after 1 usecs
[ 8674.225563] calling 00:00+ @ 21003
[ 8674.225568] call 00:00+ returned 0 after 1 usecs
[ 8674.225570] calling 00:01+ @ 21003
[ 8674.225576] call 00:01+ returned 0 after 2 usecs
[ 8674.225578] calling 00:02+ @ 21003
[ 8674.225583] call 00:02+ returned 0 after 1 usecs
[ 8674.225585] calling 00:03+ @ 21003
[ 8674.225592] call 00:03+ returned 0 after 3 usecs
[ 8674.225594] calling 00:04+ @ 21003
[ 8674.225599] call 00:04+ returned 0 after 1 usecs
[ 8674.225602] calling 00:05+ @ 21003
[ 8674.225606] call 00:05+ returned 0 after 1 usecs
[ 8674.225609] calling 00:06+ @ 21003
[ 8674.225614] call 00:06+ returned 0 after 1 usecs
[ 8674.225616] calling 00:07+ @ 21003
[ 8674.225621] call 00:07+ returned 0 after 1 usecs
[ 8674.225624] calling 00:08+ @ 21003
[ 8674.225629] call 00:08+ returned 0 after 1 usecs
[ 8674.225631] calling 00:09+ @ 21003
[ 8674.226152] serial 00:09: activated
[ 8674.226160] call 00:09+ returned 0 after 513 usecs
[ 8674.226163] calling 00:0a+ @ 21003
[ 8674.226168] call 00:0a+ returned 0 after 1 usecs
[ 8674.226170] calling 00:0b+ @ 21003
[ 8674.226175] call 00:0b+ returned 0 after 1 usecs
[ 8674.226177] calling 00:0c+ @ 21003
[ 8674.226182] call 00:0c+ returned 0 after 1 usecs
[ 8674.226222] calling pcspkr+ @ 21003
[ 8674.226227] call pcspkr+ returned 0 after 1 usecs
[ 8674.226229] calling alarmtimer+ @ 21003
[ 8674.226234] call alarmtimer+ returned 0 after 1 usecs
[ 8674.226240] calling serial8250+ @ 21003
[ 8674.226246] call serial8250+ returned 0 after 2 usecs
[ 8674.226252] calling i8042+ @ 21003
[ 8674.229187] call i8042+ returned 0 after 2861 usecs
[ 8674.229206] calling host0+ @ 21386
[ 8674.229212] call host0+ returned 0 after 3 usecs
[ 8674.229218] calling host1+ @ 21386
[ 8674.229223] call host1+ returned 0 after 1 usecs
[ 8674.229226] calling host2+ @ 21386
[ 8674.229231] call host2+ returned 0 after 1 usecs
[ 8674.229235] calling host3+ @ 21386
[ 8674.229240] call host3+ returned 0 after 1 usecs
[ 8674.229243] calling host4+ @ 21386
[ 8674.229248] call host4+ returned 0 after 1 usecs
[ 8674.229251] calling host5+ @ 21386
[ 8674.229256] call host5+ returned 0 after 1 usecs
[ 8674.229259] calling host6+ @ 21386
[ 8674.229264] call host6+ returned 0 after 1 usecs
[ 8674.229267] calling host7+ @ 21386
[ 8674.229272] call host7+ returned 0 after 1 usecs
[ 8674.229292] calling serio0+ @ 21003
[ 8674.229299] call serio0+ returned 0 after 4 usecs
[ 8674.229313] calling serio1+ @ 21003
[ 8674.229318] call serio1+ returned 0 after 1 usecs
[ 8674.229322] calling rtc0+ @ 21003
[ 8674.229371] call rtc0+ returned 0 after 45 usecs
[ 8674.229540] calling target1:0:0+ @ 21401
[ 8674.229545] call target1:0:0+ returned 0 after 1 usecs
[ 8674.229548] calling 1:0:0:0+ @ 21401
[ 8674.229557] call 1:0:0:0+ returned 0 after 5 usecs
[ 8674.229564] calling target1:0:1+ @ 21401
[ 8674.229569] call target1:0:1+ returned 0 after 1 usecs
[ 8674.229572] calling 1:0:1:0+ @ 21401
[ 8674.229578] call 1:0:1:0+ returned 0 after 2 usecs
[ 8674.229639] calling target2:0:0+ @ 21405
[ 8674.229645] call target2:0:0+ returned 0 after 1 usecs
[ 8674.229647] calling 2:0:0:0+ @ 21405
[ 8674.229654] sd 2:0:0:0: [sda] Starting disk
[ 8674.229706] calling target3:0:0+ @ 21407
[ 8674.229711] call target3:0:0+ returned 0 after 1 usecs
[ 8674.229713] calling 3:0:0:0+ @ 21407
[ 8674.229718] sd 3:0:0:0: [sdb] Starting disk
[ 8674.240161] r8169 0000:04:00.0: eth3: link down
[ 8674.244028] call 0000:00:12.0+ returned 0 after 22314 usecs
[ 8674.244037] calling usb3+ @ 21380
[ 8674.244066] call 0000:00:14.5+ returned 0 after 22072 usecs
[ 8674.244072] calling usb7+ @ 21397
[ 8674.244083] call 0000:00:13.0+ returned 0 after 22211 usecs
[ 8674.244091] calling usb5+ @ 21369
[ 8674.244102] call 0000:00:13.1+ returned 0 after 22202 usecs
[ 8674.244107] calling usb6+ @ 21386
[ 8674.244138] call 0000:00:13.2+ returned 0 after 22211 usecs
[ 8674.244144] calling usb2+ @ 21365
[ 8674.244153] call 0000:00:12.1+ returned 0 after 22409 usecs
[ 8674.244159] calling usb4+ @ 21375
[ 8674.244180] call 0000:00:12.2+ returned 0 after 22336 usecs
[ 8674.244185] calling usb1+ @ 21360
[ 8674.250804] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 8674.251048] radeon 0000:01:05.0: WB enabled
[ 8674.272044] call usb2+ returned 0 after 27242 usecs
[ 8674.281983] [drm] ring test succeeded in 1 usecs
[ 8674.281996] [drm] ib test succeeded in 0 usecs
[ 8674.282016] [drm:drm_crtc_helper_set_config],
[ 8674.282018] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 8674.282031] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 8674.282037] [drm:avivo_crtc_load_lut], 0
[ 8674.282046] [drm:avivo_crtc_load_lut], 0
[ 8674.296044] call usb1+ returned 0 after 50639 usecs
[ 8674.297916] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 8674.297922] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 8674.297926] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 8674.297940] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 8674.297958] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 8674.312058] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:19:1280x1024]
[ 8674.320034] [drm:avivo_crtc_load_lut], 0
[ 8674.320046] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 8674.320057] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 8674.324032] call usb7+ returned 0 after 78082 usecs
[ 8674.324054] call usb5+ returned 0 after 78085 usecs
[ 8674.324078] call usb4+ returned 0 after 78042 usecs
[ 8674.324090] calling 4-1+ @ 21409
[ 8674.324109] call usb6+ returned 0 after 78123 usecs
[ 8674.324140] call usb3+ returned 0 after 78221 usecs
[ 8674.324153] calling 3-3+ @ 21401
[ 8674.336715] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 8674.336733] [drm:avivo_crtc_load_lut], 0
[ 8674.336740] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 8674.336749] call 0000:01:05.0+ returned 0 after 112546 usecs
[ 8674.373069] call 3-3+ returned 0 after 47766 usecs
[ 8674.375112] call 4-1+ returned 0 after 49823 usecs
[ 8674.392500] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 8674.392505] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 8674.392509] ata2.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 8674.400503] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 8674.400507] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 8674.400512] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 8674.408435] ata2.00: configured for UDMA/33
[ 8674.424433] ata2.01: configured for UDMA/33
[ 8674.540043] ata7: SATA link down (SStatus 0 SControl 300)
[ 8674.540074] ata8: SATA link down (SStatus 0 SControl 300)
[ 8674.540105] ata6: SATA link down (SStatus 0 SControl 300)
[ 8674.540144] ata5: SATA link down (SStatus 0 SControl 300)
[ 8674.796025] ata3: softreset failed (device not ready)
[ 8674.796029] ata3: applying PMP SRST workaround and retrying
[ 8674.968039] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8674.968738] ata3.00: configured for UDMA/100
[ 8674.984235] call 2:0:0:0+ returned 0 after 736896 usecs
[ 8675.922862] r8169 0000:04:00.0: eth3: link up
[ 8684.232019] ata4: softreset failed (device not ready)
[ 8687.692018] ata4: softreset failed (device not ready)
[ 8687.692022] ata4: applying PMP SRST workaround and retrying
[ 8687.864029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8687.876213] ata4.00: configured for UDMA/100
[ 8687.925604] call 3:0:0:0+ returned 0 after 13374887 usecs
[ 8687.925646] calling input0+ @ 21003
[ 8687.925652] call input0+ returned 0 after 2 usecs
[ 8687.925664] calling input1+ @ 21003
[ 8687.925705] call input1+ returned 0 after 37 usecs
[ 8687.925709] calling input2+ @ 21003
[ 8687.925727] call input2+ returned 0 after 13 usecs
[ 8687.925746] calling input3+ @ 21003
[ 8687.925763] call input3+ returned 0 after 13 usecs
[ 8687.925767] calling input4+ @ 21003
[ 8687.925784] call input4+ returned 0 after 13 usecs
[ 8687.925796] calling ttm+ @ 21003
[ 8687.925801] call ttm+ returned 0 after 2 usecs
[ 8687.925805] calling SP5100 TCO timer+ @ 21003
[ 8687.925811] call SP5100 TCO timer+ returned 0 after 1 usecs
[ 8687.925814] calling controlD64+ @ 21003
[ 8687.925819] call controlD64+ returned 0 after 1 usecs
[ 8687.925821] calling card0+ @ 21003
[ 8687.925827] call card0+ returned 0 after 1 usecs
[ 8687.925829] calling i2c-0+ @ 21003
[ 8687.925835] call i2c-0+ returned 0 after 1 usecs
[ 8687.925837] calling i2c-1+ @ 21003
[ 8687.925842] call i2c-1+ returned 0 after 1 usecs
[ 8687.925845] calling i2c-2+ @ 21003
[ 8687.925849] call i2c-2+ returned 0 after 1 usecs
[ 8687.925853] calling i2c-3+ @ 21003
[ 8687.925857] call i2c-3+ returned 0 after 1 usecs
[ 8687.925860] calling i2c-4+ @ 21003
[ 8687.925865] call i2c-4+ returned 0 after 1 usecs
[ 8687.925868] calling card0-VGA-1+ @ 21003
[ 8687.925873] call card0-VGA-1+ returned 0 after 1 usecs
[ 8687.925876] calling card0-DVI-D-1+ @ 21003
[ 8687.925881] call card0-DVI-D-1+ returned 0 after 1 usecs
[ 8687.925904] calling w83627ehf.656+ @ 21003
[ 8687.925909] call w83627ehf.656+ returned 0 after 1 usecs
[ 8687.925926] PM: resume of devices complete after 13704.958 msecs
[ 8687.926539] PM: Finishing wakeup.
[ 8687.926541] Restarting tasks ... done.
[ 8688.145769] [drm:avivo_crtc_load_lut], 0
[ 8688.145804] [drm:drm_mode_setcrtc], [CRTC:10]
[ 8688.145824] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 8688.145830] [drm:drm_crtc_helper_set_config],
[ 8688.145834] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 8688.145868] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 8688.145920] [drm:drm_mode_setcrtc], [CRTC:11]
[ 8688.145923] [drm:drm_crtc_helper_set_config],
[ 8688.145925] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 8688.145936] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 8688.146130] [drm:avivo_crtc_load_lut], 0
[ 8688.146173] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 8688.146180] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 8688.164351] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 8688.164364] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 8688.164370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 8688.164385] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 8688.164388] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 8688.176328] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 8688.176335] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 8688.176339] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 8688.176377] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 8688.176381] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 8688.178358] [drm:radeon_atombios_connected_scratch_regs], DFP3 disconnected
[ 8688.178361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] disconnected
[ 8688.178367] [drm:drm_mode_debug_printmodeline], Modeline 17:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 8688.178373] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
[ 8688.178377] [drm:drm_mode_debug_printmodeline], Modeline 27:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 8688.178382] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3
[ 8688.178386] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 8688.178391] [drm:drm_mode_prune_invalid], Not using 1280x960 mode -3
[ 8688.178394] [drm:drm_mode_debug_printmodeline], Modeline 34:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 8688.178400] [drm:drm_mode_prune_invalid], Not using 1152x864 mode -3
[ 8688.178403] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 8688.178409] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 8688.178412] [drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 8688.178418] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 8688.178421] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 8688.178426] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3
[ 8688.178429] [drm:drm_mode_debug_printmodeline], Modeline 31:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 8688.178435] [drm:drm_mode_prune_invalid], Not using 832x624 mode -3
[ 8688.178438] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 8688.178444] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 8688.178447] [drm:drm_mode_debug_printmodeline], Modeline 32:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 8688.178452] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 8688.178455] [drm:drm_mode_debug_printmodeline], Modeline 20:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 8688.178460] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 8688.178463] [drm:drm_mode_debug_printmodeline], Modeline 21:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 8688.178469] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3
[ 8688.178472] [drm:drm_mode_debug_printmodeline], Modeline 23:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 8688.178477] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 8688.178480] [drm:drm_mode_debug_printmodeline], Modeline 22:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 8688.178486] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 8688.178489] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 8688.178494] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 8688.178497] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 8688.178502] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3
[ 8688.178505] [drm:drm_mode_debug_printmodeline], Modeline 26:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 8688.178511] [drm:drm_mode_prune_invalid], Not using 720x400 mode -3
[ 8688.178515] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 8688.178518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 8688.180741] [drm:radeon_atombios_connected_scratch_regs], DFP3 disconnected
[ 8688.180746] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] disconnected
[ 9069.400626] PM: Syncing filesystems ... done.
[ 9069.999127] PM: Preparing system for mem sleep
[ 9070.036208] [drm:drm_crtc_helper_set_config],
[ 9070.036212] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9070.036225] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9070.036238] [drm:drm_crtc_helper_set_config],
[ 9070.036240] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9070.036244] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9070.036255] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9070.067259] [drm:drm_crtc_helper_set_config],
[ 9070.067261] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9070.067267] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 9070.067270] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 9070.067272] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 9070.067275] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9070.067278] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 9070.067282] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9070.067291] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 9070.067297] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 9070.067300] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9070.067311] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9070.067327] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 9070.080054] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:19:1280x1024]
[ 9070.088033] [drm:avivo_crtc_load_lut], 0
[ 9070.088044] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 9070.088053] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 9070.088056] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] set DPMS on
[ 9070.088060] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9070.088065] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9070.105105] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9070.120050] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9070.136035] PM: Entering mem sleep
[ 9070.136071] Suspending console(s) (use no_console_suspend to debug)
[ 9070.136294] calling w83627ehf.656+ @ 21729
[ 9070.136300] call w83627ehf.656+ returned 0 after 2 usecs
[ 9070.136322] calling card0-DVI-D-1+ @ 21729
[ 9070.136327] call card0-DVI-D-1+ returned 0 after 1 usecs
[ 9070.136330] calling card0-VGA-1+ @ 21729
[ 9070.136335] call card0-VGA-1+ returned 0 after 1 usecs
[ 9070.136337] calling i2c-4+ @ 21729
[ 9070.136343] call i2c-4+ returned 0 after 2 usecs
[ 9070.136345] calling i2c-3+ @ 21729
[ 9070.136350] call i2c-3+ returned 0 after 1 usecs
[ 9070.136353] calling i2c-2+ @ 21729
[ 9070.136358] call i2c-2+ returned 0 after 1 usecs
[ 9070.136360] calling i2c-1+ @ 21729
[ 9070.136365] call i2c-1+ returned 0 after 1 usecs
[ 9070.136368] calling i2c-0+ @ 21729
[ 9070.136373] call i2c-0+ returned 0 after 1 usecs
[ 9070.136376] calling card0+ @ 21729
[ 9070.136380] call card0+ returned 0 after 1 usecs
[ 9070.136383] calling controlD64+ @ 21729
[ 9070.136388] call controlD64+ returned 0 after 1 usecs
[ 9070.136391] calling SP5100 TCO timer+ @ 21729
[ 9070.136396] call SP5100 TCO timer+ returned 0 after 1 usecs
[ 9070.136400] calling ttm+ @ 21729
[ 9070.136405] call ttm+ returned 0 after 1 usecs
[ 9070.136413] calling input4+ @ 21729
[ 9070.136419] call input4+ returned 0 after 2 usecs
[ 9070.136422] calling input3+ @ 21729
[ 9070.136427] call input3+ returned 0 after 1 usecs
[ 9070.136449] calling input2+ @ 21729
[ 9070.136455] call input2+ returned 0 after 3 usecs
[ 9070.136477] calling input1+ @ 21729
[ 9070.136482] call input1+ returned 0 after 1 usecs
[ 9070.136497] calling input0+ @ 21729
[ 9070.136502] call input0+ returned 0 after 1 usecs
[ 9070.136528] calling 4-1+ @ 21408
[ 9070.136566] calling 3:0:0:0+ @ 21407
[ 9070.136575] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[ 9070.136619] calling 2:0:0:0+ @ 22094
[ 9070.136630] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 9070.136644] calling rtc0+ @ 21729
[ 9070.136675] call rtc0+ returned 0 after 25 usecs
[ 9070.136678] calling serio1+ @ 21729
[ 9070.136684] call serio1+ returned 0 after 1 usecs
[ 9070.136686] calling serio0+ @ 21729
[ 9070.136691] call serio0+ returned 0 after 1 usecs
[ 9070.136694] calling i8042+ @ 21729
[ 9070.136707] calling 3-3+ @ 22096
[ 9070.136744] calling 1:0:1:0+ @ 22097
[ 9070.136751] call 1:0:1:0+ returned 0 after 3 usecs
[ 9070.136754] calling target1:0:1+ @ 22097
[ 9070.136761] call target1:0:1+ returned 0 after 3 usecs
[ 9070.136767] calling 1:0:0:0+ @ 22097
[ 9070.136773] call 1:0:0:0+ returned 0 after 2 usecs
[ 9070.136776] calling target1:0:0+ @ 22097
[ 9070.136784] call target1:0:0+ returned 0 after 2 usecs
[ 9070.136791] calling usb7+ @ 22097
[ 9070.136821] calling usb6+ @ 22098
[ 9070.136846] calling host7+ @ 22099
[ 9070.136851] call host7+ returned 0 after 1 usecs
[ 9070.136856] calling host6+ @ 22099
[ 9070.136860] call host6+ returned 0 after 1 usecs
[ 9070.136865] calling host5+ @ 22099
[ 9070.136870] call host5+ returned 0 after 1 usecs
[ 9070.136874] calling host4+ @ 22099
[ 9070.136879] call host4+ returned 0 after 1 usecs
[ 9070.136915] calling host1+ @ 22101
[ 9070.136920] call host1+ returned 0 after 1 usecs
[ 9070.136925] calling host0+ @ 22101
[ 9070.136930] call host0+ returned 0 after 1 usecs
[ 9070.136937] calling usb5+ @ 22101
[ 9070.136971] call i8042+ returned 0 after 266 usecs
[ 9070.136978] sd 3:0:0:0: [sdb] Stopping disk
[ 9070.136990] calling serial8250+ @ 21729
[ 9070.136997] call serial8250+ returned 0 after 3 usecs
[ 9070.137007] calling alarmtimer+ @ 21729
[ 9070.137010] calling usb2+ @ 22104
[ 9070.137013] call alarmtimer+ returned 0 after 2 usecs
[ 9070.137016] calling pcspkr+ @ 21729
[ 9070.137021] call pcspkr+ returned 0 after 1 usecs
[ 9070.137045] calling usb1+ @ 22105
[ 9070.137079] calling 00:0c+ @ 21729
[ 9070.137086] call 00:0c+ returned 0 after 3 usecs
[ 9070.137089] calling 00:0b+ @ 21729
[ 9070.137094] call 00:0b+ returned 0 after 1 usecs
[ 9070.137097] calling 00:0a+ @ 21729
[ 9070.137102] call 00:0a+ returned 0 after 2 usecs
[ 9070.137105] calling 00:09+ @ 21729
[ 9070.137298] serial 00:09: disabled
[ 9070.137304] serial 00:09: wake-up capability disabled by ACPI
[ 9070.137308] call 00:09+ returned 0 after 195 usecs
[ 9070.137311] calling 00:08+ @ 21729
[ 9070.137316] call 00:08+ returned 0 after 1 usecs
[ 9070.137318] calling 00:07+ @ 21729
[ 9070.137323] call 00:07+ returned 0 after 1 usecs
[ 9070.137326] calling 00:06+ @ 21729
[ 9070.137331] call 00:06+ returned 0 after 1 usecs
[ 9070.137333] calling 00:05+ @ 21729
[ 9070.137338] call 00:05+ returned 0 after 1 usecs
[ 9070.137341] calling 00:04+ @ 21729
[ 9070.137345] call 00:04+ returned 0 after 1 usecs
[ 9070.137348] calling 00:03+ @ 21729
[ 9070.137357] call 00:03+ returned 0 after 5 usecs
[ 9070.137360] calling 00:02+ @ 21729
[ 9070.137364] call 00:02+ returned 0 after 1 usecs
[ 9070.137367] calling 00:01+ @ 21729
[ 9070.137372] call 00:01+ returned 0 after 2 usecs
[ 9070.137375] calling 00:00+ @ 21729
[ 9070.137380] call 00:00+ returned 0 after 1 usecs
[ 9070.137410] calling LNXPWRBN:00+ @ 21729
[ 9070.137415] call LNXPWRBN:00+ returned 0 after 1 usecs
[ 9070.137420] calling 0000:04:00.0+ @ 22107
[ 9070.137422] calling PNP0C14:00+ @ 21729
[ 9070.137428] call PNP0C14:00+ returned 0 after 2 usecs
[ 9070.137431] calling device:21+ @ 21729
[ 9070.137435] call device:21+ returned 0 after 1 usecs
[ 9070.137438] calling PNP0C0F:07+ @ 21729
[ 9070.137443] call PNP0C0F:07+ returned 0 after 1 usecs
[ 9070.137446] calling PNP0C0F:06+ @ 21729
[ 9070.137451] call PNP0C0F:06+ returned 0 after 1 usecs
[ 9070.137453] calling PNP0C0F:05+ @ 21729
[ 9070.137459] call PNP0C0F:05+ returned 0 after 2 usecs
[ 9070.137462] calling PNP0C0F:04+ @ 21729
[ 9070.137466] call PNP0C0F:04+ returned 0 after 1 usecs
[ 9070.137469] calling PNP0C0F:03+ @ 21729
[ 9070.137474] call PNP0C0F:03+ returned 0 after 1 usecs
[ 9070.137477] calling PNP0C0F:02+ @ 21729
[ 9070.137481] call PNP0C0F:02+ returned 0 after 1 usecs
[ 9070.137484] calling PNP0C0F:01+ @ 21729
[ 9070.137489] call PNP0C0F:01+ returned 0 after 1 usecs
[ 9070.137492] calling PNP0C0F:00+ @ 21729
[ 9070.137497] call PNP0C0F:00+ returned 0 after 1 usecs
[ 9070.137499] calling PNP0C0C:00+ @ 21729
[ 9070.137504] call PNP0C0C:00+ returned 0 after 1 usecs
[ 9070.137507] calling PNP0C01:00+ @ 21729
[ 9070.137512] call PNP0C01:00+ returned 0 after 1 usecs
[ 9070.137515] calling device:20+ @ 21729
[ 9070.137520] call device:20+ returned 0 after 1 usecs
[ 9070.137522] calling device:1f+ @ 21729
[ 9070.137527] call device:1f+ returned 0 after 1 usecs
[ 9070.137530] calling device:1e+ @ 21729
[ 9070.137547] call device:1e+ returned 0 after 13 usecs
[ 9070.137550] calling device:1d+ @ 21729
[ 9070.137554] call device:1d+ returned 0 after 1 usecs
[ 9070.137557] calling device:1c+ @ 21729
[ 9070.137562] call device:1c+ returned 0 after 1 usecs
[ 9070.137565] calling device:1b+ @ 21729
[ 9070.137570] call device:1b+ returned 0 after 1 usecs
[ 9070.137572] calling device:1a+ @ 21729
[ 9070.137577] call device:1a+ returned 0 after 1 usecs
[ 9070.137580] calling device:19+ @ 21729
[ 9070.137585] call device:19+ returned 0 after 2 usecs
[ 9070.137588] calling device:18+ @ 21729
[ 9070.137593] call device:18+ returned 0 after 1 usecs
[ 9070.137596] calling device:17+ @ 21729
[ 9070.137600] call device:17+ returned 0 after 1 usecs
[ 9070.137603] calling device:16+ @ 21729
[ 9070.137608] call device:16+ returned 0 after 1 usecs
[ 9070.137611] calling PNP0C02:04+ @ 21729
[ 9070.137615] call PNP0C02:04+ returned 0 after 1 usecs
[ 9070.137618] calling PNP0C02:03+ @ 21729
[ 9070.137623] call PNP0C02:03+ returned 0 after 1 usecs
[ 9070.137626] calling PNP0501:00+ @ 21729
[ 9070.137630] call PNP0501:00+ returned 0 after 1 usecs
[ 9070.137633] calling PNP0C02:02+ @ 21729
[ 9070.137638] call PNP0C02:02+ returned 0 after 1 usecs
[ 9070.137641] calling PNP0C02:01+ @ 21729
[ 9070.137646] call PNP0C02:01+ returned 0 after 1 usecs
[ 9070.137649] calling PNP0103:00+ @ 21729
[ 9070.137653] call PNP0103:00+ returned 0 after 1 usecs
[ 9070.137656] calling PNP0C04:00+ @ 21729
[ 9070.137661] call PNP0C04:00+ returned 0 after 1 usecs
[ 9070.137664] calling PNP0800:00+ @ 21729
[ 9070.137669] call PNP0800:00+ returned 0 after 1 usecs
[ 9070.137671] calling PNP0B00:00+ @ 21729
[ 9070.137676] call PNP0B00:00+ returned 0 after 1 usecs
[ 9070.137679] calling PNP0100:00+ @ 21729
[ 9070.137684] call PNP0100:00+ returned 0 after 1 usecs
[ 9070.137689] call 0000:04:00.0+ returned 0 after 256 usecs
[ 9070.137691] calling PNP0200:00+ @ 21729
[ 9070.137696] call PNP0200:00+ returned 0 after 1 usecs
[ 9070.137701] sd 2:0:0:0: [sda] Stopping disk
[ 9070.137702] calling PNP0000:00+ @ 21729
[ 9070.137707] call PNP0000:00+ returned 0 after 1 usecs
[ 9070.137712] calling 0000:01:05.0+ @ 22107
[ 9070.137713] calling device:15+ @ 21729
[ 9070.137718] call device:15+ returned 0 after 1 usecs
[ 9070.137721] calling device:14+ @ 21729
[ 9070.137726] call device:14+ returned 0 after 1 usecs
[ 9070.137729] calling device:13+ @ 21729
[ 9070.137734] call device:13+ returned 0 after 1 usecs
[ 9070.137737] calling device:12+ @ 21729
[ 9070.137742] call device:12+ returned 0 after 1 usecs
[ 9070.137745] calling device:11+ @ 21729
[ 9070.137750] call device:11+ returned 0 after 1 usecs
[ 9070.137753] calling device:10+ @ 21729
[ 9070.137758] call device:10+ returned 0 after 1 usecs
[ 9070.137761] calling device:0f+ @ 21729
[ 9070.137765] call device:0f+ returned 0 after 1 usecs
[ 9070.137769] calling device:0e+ @ 21729
[ 9070.137773] call device:0e+ returned 0 after 1 usecs
[ 9070.137776] calling device:0d+ @ 21729
[ 9070.137781] call device:0d+ returned 0 after 1 usecs
[ 9070.137784] calling device:0c+ @ 21729
[ 9070.137789] call device:0c+ returned 0 after 1 usecs
[ 9070.137792] calling device:0b+ @ 21729
[ 9070.137796] call device:0b+ returned 0 after 1 usecs
[ 9070.137799] calling device:0a+ @ 21729
[ 9070.137804] call device:0a+ returned 0 after 1 usecs
[ 9070.137807] calling device:09+ @ 21729
[ 9070.137811] call device:09+ returned 0 after 1 usecs
[ 9070.137814] calling device:08+ @ 21729
[ 9070.137827] r8169 0000:04:00.0: eth3: link down
[ 9070.137834] call device:08+ returned 0 after 1 usecs
[ 9070.137851] calling device:07+ @ 21729
[ 9070.137856] call device:07+ returned 0 after 1 usecs
[ 9070.137859] calling device:06+ @ 21729
[ 9070.137864] call device:06+ returned 0 after 1 usecs
[ 9070.137867] calling device:05+ @ 21729
[ 9070.137871] call device:05+ returned 0 after 1 usecs
[ 9070.137874] calling device:04+ @ 21729
[ 9070.137879] call device:04+ returned 0 after 1 usecs
[ 9070.137882] calling device:03+ @ 21729
[ 9070.137887] call device:03+ returned 0 after 1 usecs
[ 9070.137890] calling device:02+ @ 21729
[ 9070.137895] call device:02+ returned 0 after 1 usecs
[ 9070.137898] calling PNP0C02:00+ @ 21729
[ 9070.137903] call PNP0C02:00+ returned 0 after 1 usecs
[ 9070.137906] calling device:01+ @ 21729
[ 9070.137911] call device:01+ returned 0 after 1 usecs
[ 9070.137917] calling PNP0A03:00+ @ 21729
[ 9070.137922] call PNP0A03:00+ returned 0 after 1 usecs
[ 9070.137926] calling device:00+ @ 21729
[ 9070.137931] call device:00+ returned 0 after 1 usecs
[ 9070.137934] calling LNXCPU:03+ @ 21729
[ 9070.137942] call LNXCPU:03+ returned 0 after 4 usecs
[ 9070.137945] calling LNXCPU:02+ @ 21729
[ 9070.137951] call LNXCPU:02+ returned 0 after 2 usecs
[ 9070.137954] calling LNXCPU:01+ @ 21729
[ 9070.137960] call LNXCPU:01+ returned 0 after 2 usecs
[ 9070.137962] calling LNXCPU:00+ @ 21729
[ 9070.137969] call LNXCPU:00+ returned 0 after 2 usecs
[ 9070.137973] calling LNXSYSTM:00+ @ 21729
[ 9070.137978] call LNXSYSTM:00+ returned 0 after 1 usecs
[ 9070.137985] calling reg-dummy+ @ 21729
[ 9070.137990] call reg-dummy+ returned 0 after 1 usecs
[ 9070.138072] calling 0000:00:18.3+ @ 22106
[ 9070.138078] call 0000:00:18.3+ returned 0 after 2 usecs
[ 9070.138084] calling 0000:00:18.2+ @ 22106
[ 9070.138089] call 0000:00:18.2+ returned 0 after 1 usecs
[ 9070.138092] calling 0000:00:18.1+ @ 22106
[ 9070.138098] call 0000:00:18.1+ returned 0 after 1 usecs
[ 9070.138101] calling 0000:00:18.0+ @ 22106
[ 9070.138106] call 0000:00:18.0+ returned 0 after 1 usecs
[ 9070.138641] calling 0000:00:14.4+ @ 22108
[ 9070.138648] call 0000:00:14.4+ returned 0 after 2 usecs
[ 9070.138710] calling 0000:00:14.3+ @ 22108
[ 9070.138716] call 0000:00:14.3+ returned 0 after 2 usecs
[ 9070.138729] calling 0000:00:14.2+ @ 22108
[ 9070.138748] calling 0000:00:14.1+ @ 22109
[ 9070.138803] snd_hda_intel 0000:00:14.2: PCI INT A disabled
[ 9070.139001] pata_atiixp 0000:00:14.1: PCI INT A disabled
[ 9070.139012] call 0000:00:14.1+ returned 0 after 253 usecs
[ 9070.139024] calling 0000:00:14.0+ @ 22109
[ 9070.139033] call 0000:00:14.0+ returned 0 after 4 usecs
[ 9070.139814] calling 0000:00:0a.0+ @ 22116
[ 9070.139822] call 0000:00:0a.0+ returned 0 after 4 usecs
[ 9070.139870] calling 0000:00:09.0+ @ 22116
[ 9070.139878] call 0000:00:09.0+ returned 0 after 2 usecs
[ 9070.139904] calling 0000:00:00.0+ @ 22117
[ 9070.139913] call 0000:00:00.0+ returned 0 after 2 usecs
[ 9070.152028] call 3-3+ returned 0 after 14957 usecs
[ 9070.152038] call 0000:00:14.2+ returned 0 after 12994 usecs
[ 9070.152044] call 4-1+ returned 0 after 15149 usecs
[ 9070.152050] calling usb3+ @ 22103
[ 9070.152063] call usb3+ returned 0 after 9 usecs
[ 9070.152068] calling usb4+ @ 22102
[ 9070.152080] call usb4+ returned 0 after 7 usecs
[ 9070.152084] calling 0000:00:12.1+ @ 22113
[ 9070.152094] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 9070.152098] call 0000:00:12.1+ returned 0 after 10 usecs
[ 9070.152110] calling 0000:00:12.0+ @ 22114
[ 9070.152120] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 9070.152124] call 0000:00:12.0+ returned 0 after 9 usecs
[ 9070.165022] call usb2+ returned 0 after 27350 usecs
[ 9070.165035] calling 0000:00:13.2+ @ 22109
[ 9070.180027] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 9070.180031] call 0000:00:13.2+ returned 0 after 14639 usecs
[ 9070.189052] call usb1+ returned 0 after 50785 usecs
[ 9070.189065] calling 0000:00:12.2+ @ 22112
[ 9070.204027] ehci_hcd 0000:00:12.2: PCI INT B disabled
[ 9070.204031] call 0000:00:12.2+ returned 0 after 14610 usecs
[ 9070.216043] call usb7+ returned 0 after 77391 usecs
[ 9070.216048] calling 0000:00:14.5+ @ 22106
[ 9070.216058] ohci_hcd 0000:00:14.5: PCI INT C disabled
[ 9070.216062] call 0000:00:14.5+ returned 0 after 9 usecs
[ 9070.216082] call usb5+ returned 0 after 77286 usecs
[ 9070.216087] calling 0000:00:13.0+ @ 22111
[ 9070.216096] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 9070.216100] call 0000:00:13.0+ returned 0 after 9 usecs
[ 9070.216119] call usb6+ returned 0 after 77436 usecs
[ 9070.216132] calling 0000:00:13.1+ @ 22110
[ 9070.216142] ohci_hcd 0000:00:13.1: PCI INT A disabled
[ 9070.216146] call 0000:00:13.1+ returned 0 after 9 usecs
[ 9070.244540] radeon 0000:01:05.0: PCI INT A disabled
[ 9070.260030] call 0000:01:05.0+ returned 0 after 119446 usecs
[ 9070.260047] calling 0000:00:01.0+ @ 22116
[ 9070.260053] call 0000:00:01.0+ returned 0 after 1 usecs
[ 9070.574718] call 3:0:0:0+ returned 0 after 427878 usecs
[ 9070.574735] calling target3:0:0+ @ 22093
[ 9070.574740] call target3:0:0+ returned 0 after 1 usecs
[ 9070.574751] calling host3+ @ 22099
[ 9070.574757] call host3+ returned 0 after 1 usecs
[ 9070.786472] call 2:0:0:0+ returned 0 after 634618 usecs
[ 9070.786488] calling target2:0:0+ @ 22095
[ 9070.786494] call target2:0:0+ returned 0 after 1 usecs
[ 9070.786506] calling host2+ @ 22100
[ 9070.786511] call host2+ returned 0 after 1 usecs
[ 9070.786528] calling 0000:00:11.0+ @ 22115
[ 9070.786797] ahci 0000:00:11.0: PCI INT A disabled
[ 9070.800031] call 0000:00:11.0+ returned 0 after 13183 usecs
[ 9070.800057] PM: suspend of devices complete after 663.773 msecs
[ 9070.800090] calling w83627ehf.656+ @ 21729, parent: platform
[ 9070.800096] initcall w83627ehf.656_i+ returned 0 after 2 usecs
[ 9070.800113] calling i2c-4+ @ 21729, parent: none
[ 9070.800118] initcall i2c-4_i+ returned 0 after 1 usecs
[ 9070.800121] calling i2c-3+ @ 21729, parent: none
[ 9070.800126] initcall i2c-3_i+ returned 0 after 1 usecs
[ 9070.800128] calling i2c-2+ @ 21729, parent: none
[ 9070.800133] initcall i2c-2_i+ returned 0 after 1 usecs
[ 9070.800136] calling i2c-1+ @ 21729, parent: none
[ 9070.800141] initcall i2c-1_i+ returned 0 after 1 usecs
[ 9070.800144] calling i2c-0+ @ 21729, parent: none
[ 9070.800148] initcall i2c-0_i+ returned 0 after 1 usecs
[ 9070.800152] calling SP5100 TCO timer+ @ 21729, parent: platform
[ 9070.800157] initcall SP5100 TCO timer_i+ returned 0 after 1 usecs
[ 9070.800166] calling input4+ @ 21729, parent: LNXPWRBN:00
[ 9070.800171] initcall input4_i+ returned 0 after 1 usecs
[ 9070.800174] calling input3+ @ 21729, parent: PNP0C0C:00
[ 9070.800179] initcall input3_i+ returned 0 after 1 usecs
[ 9070.800193] calling input2+ @ 21729, parent: 4-1:1.1
[ 9070.800198] initcall input2_i+ returned 0 after 1 usecs
[ 9070.800203] calling input1+ @ 21729, parent: 4-1:1.0
[ 9070.800208] initcall input1_i+ returned 0 after 1 usecs
[ 9070.800212] calling 4-1+ @ 21729, parent: usb4
[ 9070.800217] initcall 4-1_i+ returned 0 after 1 usecs
[ 9070.800225] calling input0+ @ 21729, parent: 3-3:1.0
[ 9070.800230] initcall input0_i+ returned 0 after 1 usecs
[ 9070.800236] calling 3:0:0:0+ @ 21729, parent: target3:0:0
[ 9070.800241] initcall 3:0:0:0_i+ returned 0 after 1 usecs
[ 9070.800243] calling target3:0:0+ @ 21729, parent: host3
[ 9070.800248] initcall target3:0:0_i+ returned 0 after 1 usecs
[ 9070.800251] calling 2:0:0:0+ @ 21729, parent: target2:0:0
[ 9070.800256] initcall 2:0:0:0_i+ returned 0 after 1 usecs
[ 9070.800259] calling target2:0:0+ @ 21729, parent: host2
[ 9070.800264] initcall target2:0:0_i+ returned 0 after 1 usecs
[ 9070.800268] calling 3-3+ @ 21729, parent: usb3
[ 9070.800273] initcall 3-3_i+ returned 0 after 1 usecs
[ 9070.800276] calling 1:0:1:0+ @ 21729, parent: target1:0:1
[ 9070.800281] initcall 1:0:1:0_i+ returned 0 after 1 usecs
[ 9070.800284] calling target1:0:1+ @ 21729, parent: host1
[ 9070.800289] initcall target1:0:1_i+ returned 0 after 1 usecs
[ 9070.800293] calling 1:0:0:0+ @ 21729, parent: target1:0:0
[ 9070.800298] initcall 1:0:0:0_i+ returned 0 after 1 usecs
[ 9070.800300] calling target1:0:0+ @ 21729, parent: host1
[ 9070.800305] initcall target1:0:0_i+ returned 0 after 1 usecs
[ 9070.800310] calling usb7+ @ 21729, parent: 0000:00:14.5
[ 9070.800315] initcall usb7_i+ returned 0 after 1 usecs
[ 9070.800319] calling usb6+ @ 21729, parent: 0000:00:13.1
[ 9070.800324] initcall usb6_i+ returned 0 after 1 usecs
[ 9070.800327] calling host7+ @ 21729, parent: 0000:00:11.0
[ 9070.800332] initcall host7_i+ returned 0 after 1 usecs
[ 9070.800334] calling host6+ @ 21729, parent: 0000:00:11.0
[ 9070.800339] initcall host6_i+ returned 0 after 1 usecs
[ 9070.800342] calling host5+ @ 21729, parent: 0000:00:11.0
[ 9070.800347] initcall host5_i+ returned 0 after 1 usecs
[ 9070.800350] calling host4+ @ 21729, parent: 0000:00:11.0
[ 9070.800355] initcall host4_i+ returned 0 after 1 usecs
[ 9070.800358] calling host3+ @ 21729, parent: 0000:00:11.0
[ 9070.800363] initcall host3_i+ returned 0 after 1 usecs
[ 9070.800365] calling host2+ @ 21729, parent: 0000:00:11.0
[ 9070.800371] initcall host2_i+ returned 0 after 1 usecs
[ 9070.800385] calling host1+ @ 21729, parent: 0000:00:14.1
[ 9070.800390] initcall host1_i+ returned 0 after 1 usecs
[ 9070.800394] calling host0+ @ 21729, parent: 0000:00:14.1
[ 9070.800399] initcall host0_i+ returned 0 after 1 usecs
[ 9070.800409] calling usb5+ @ 21729, parent: 0000:00:13.0
[ 9070.800414] initcall usb5_i+ returned 0 after 1 usecs
[ 9070.800417] calling usb4+ @ 21729, parent: 0000:00:12.1
[ 9070.800422] initcall usb4_i+ returned 0 after 1 usecs
[ 9070.800426] calling usb3+ @ 21729, parent: 0000:00:12.0
[ 9070.800431] initcall usb3_i+ returned 0 after 1 usecs
[ 9070.800435] calling usb2+ @ 21729, parent: 0000:00:13.2
[ 9070.800440] initcall usb2_i+ returned 0 after 1 usecs
[ 9070.800444] calling usb1+ @ 21729, parent: 0000:00:12.2
[ 9070.800449] initcall usb1_i+ returned 0 after 1 usecs
[ 9070.800455] calling serio1+ @ 21729, parent: i8042
[ 9070.800460] initcall serio1_i+ returned 0 after 1 usecs
[ 9070.800462] calling serio0+ @ 21729, parent: i8042
[ 9070.800467] initcall serio0_i+ returned 0 after 1 usecs
[ 9070.800469] calling i8042+ @ 21729, parent: platform
[ 9070.800475] initcall i8042_i+ returned 0 after 1 usecs
[ 9070.800480] calling serial8250+ @ 21729, parent: platform
[ 9070.800485] initcall serial8250_i+ returned 0 after 1 usecs
[ 9070.800491] calling alarmtimer+ @ 21729, parent: platform
[ 9070.800497] initcall alarmtimer_i+ returned 0 after 1 usecs
[ 9070.800499] calling pcspkr+ @ 21729, parent: platform
[ 9070.800504] initcall pcspkr_i+ returned 0 after 1 usecs
[ 9070.800546] calling 0000:04:00.0+ @ 21729, parent: 0000:00:0a.0
[ 9070.800591] r8169 0000:04:00.0: PME# enabled
[ 9070.800605] pcieport 0000:00:0a.0: wake-up capability enabled by ACPI
[ 9070.816096] initcall 0000:04:00.0_i+ returned 0 after 15180 usecs
[ 9070.816099] calling 0000:01:05.0+ @ 21729, parent: 0000:00:01.0
[ 9070.816105] initcall 0000:01:05.0_i+ returned 0 after 1 usecs
[ 9070.816108] calling 0000:00:18.3+ @ 21729, parent: pci0000:00
[ 9070.816117] initcall 0000:00:18.3_i+ returned 0 after 5 usecs
[ 9070.816120] calling 0000:00:18.2+ @ 21729, parent: pci0000:00
[ 9070.816129] initcall 0000:00:18.2_i+ returned 0 after 4 usecs
[ 9070.816131] calling 0000:00:18.1+ @ 21729, parent: pci0000:00
[ 9070.816140] initcall 0000:00:18.1_i+ returned 0 after 4 usecs
[ 9070.816142] calling 0000:00:18.0+ @ 21729, parent: pci0000:00
[ 9070.816151] initcall 0000:00:18.0_i+ returned 0 after 5 usecs
[ 9070.816154] calling 0000:00:14.5+ @ 21729, parent: pci0000:00
[ 9070.816184] ohci_hcd 0000:00:14.5: wake-up capability enabled by ACPI
[ 9070.816189] initcall 0000:00:14.5_i+ returned 0 after 30 usecs
[ 9070.816191] calling 0000:00:14.4+ @ 21729, parent: pci0000:00
[ 9070.816217] initcall 0000:00:14.4_i+ returned 0 after 21 usecs
[ 9070.816220] calling 0000:00:14.3+ @ 21729, parent: pci0000:00
[ 9070.816247] initcall 0000:00:14.3_i+ returned 0 after 22 usecs
[ 9070.816249] calling 0000:00:14.2+ @ 21729, parent: pci0000:00
[ 9070.816255] initcall 0000:00:14.2_i+ returned 0 after 1 usecs
[ 9070.816258] calling 0000:00:14.1+ @ 21729, parent: pci0000:00
[ 9070.816263] initcall 0000:00:14.1_i+ returned 0 after 1 usecs
[ 9070.816266] calling 0000:00:14.0+ @ 21729, parent: pci0000:00
[ 9070.816295] initcall 0000:00:14.0_i+ returned 0 after 24 usecs
[ 9070.816298] calling 0000:00:13.2+ @ 21729, parent: pci0000:00
[ 9070.816332] ehci_hcd 0000:00:13.2: PME# enabled
[ 9070.816337] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 9070.832018] initcall 0000:00:13.2_i+ returned 0 after 15347 usecs
[ 9070.832021] calling 0000:00:13.1+ @ 21729, parent: pci0000:00
[ 9070.832049] ohci_hcd 0000:00:13.1: wake-up capability enabled by ACPI
[ 9070.832054] initcall 0000:00:13.1_i+ returned 0 after 28 usecs
[ 9070.832056] calling 0000:00:13.0+ @ 21729, parent: pci0000:00
[ 9070.832084] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 9070.832088] initcall 0000:00:13.0_i+ returned 0 after 28 usecs
[ 9070.832091] calling 0000:00:12.2+ @ 21729, parent: pci0000:00
[ 9070.832125] ehci_hcd 0000:00:12.2: PME# enabled
[ 9070.832130] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 9070.848018] initcall 0000:00:12.2_i+ returned 0 after 15549 usecs
[ 9070.848021] calling 0000:00:12.1+ @ 21729, parent: pci0000:00
[ 9070.848049] ohci_hcd 0000:00:12.1: wake-up capability enabled by ACPI
[ 9070.848053] initcall 0000:00:12.1_i+ returned 0 after 28 usecs
[ 9070.848056] calling 0000:00:12.0+ @ 21729, parent: pci0000:00
[ 9070.848084] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 9070.848088] initcall 0000:00:12.0_i+ returned 0 after 28 usecs
[ 9070.848091] calling 0000:00:11.0+ @ 21729, parent: pci0000:00
[ 9070.848097] initcall 0000:00:11.0_i+ returned 0 after 1 usecs
[ 9070.848099] calling 0000:00:0a.0+ @ 21729, parent: pci0000:00
[ 9070.848124] initcall 0000:00:0a.0_i+ returned 0 after 21 usecs
[ 9070.848127] calling 0000:00:09.0+ @ 21729, parent: pci0000:00
[ 9070.848153] initcall 0000:00:09.0_i+ returned 0 after 21 usecs
[ 9070.848155] calling 0000:00:01.0+ @ 21729, parent: pci0000:00
[ 9070.848169] initcall 0000:00:01.0_i+ returned 0 after 10 usecs
[ 9070.848172] calling 0000:00:00.0+ @ 21729, parent: pci0000:00
[ 9070.848189] initcall 0000:00:00.0_i+ returned 0 after 13 usecs
[ 9070.848222] calling reg-dummy+ @ 21729, parent: platform
[ 9070.848228] initcall reg-dummy_i+ returned 0 after 1 usecs
[ 9070.848233] PM: late suspend of devices complete after 48.171 msecs
[ 9070.848374] ACPI: Preparing to enter system sleep state S3
[ 9071.248269] PM: Saving platform NVS memory
[ 9071.248668] Disabling non-boot CPUs ...
[ 9071.352016] CPU 1 is now offline
[ 9071.352664] PM: Calling kvm_suspend+0x0/0x13 [kvm]
[ 9071.352672] PM: Calling irq_gc_suspend+0x0/0x2e
[ 9071.352676] PM: Calling timekeeping_suspend+0x0/0xc3
[ 9071.352714] PM: Calling save_ioapic_entries+0x0/0x52
[ 9071.352781] PM: Calling mce_syscore_suspend+0x0/0x2
[ 9071.352787] PM: Calling i8259A_suspend+0x0/0x1c
[ 9071.352794] PM: Calling cpufreq_bp_suspend+0x0/0x46
[ 9071.352798] PM: Calling lapic_suspend+0x0/0xfd
[ 9071.352798] ACPI: Low-level resume complete
[ 9071.352798] PM: Restoring platform NVS memory
[ 9071.352798] PM: Calling lapic_resume+0x0/0x169
[ 9071.352798] PM: Calling cpufreq_bp_resume+0x0/0x49
[ 9071.352798] PM: Calling i8259A_resume+0x0/0x1e
[ 9071.352798] PM: Calling i8237A_resume+0x0/0x84
[ 9071.352798] PM: Calling mce_syscore_resume+0x0/0x16
[ 9071.352798] PM: Calling ioapic_resume+0x0/0x6c
[ 9071.352798] PM: Calling timekeeping_resume+0x0/0xc0
[ 9071.352798] PM: Calling irq_gc_resume+0x0/0x2f
[ 9071.352798] PM: Calling irq_pm_syscore_resume+0x0/0x7
[ 9071.352798] PM: Calling irqrouter_resume+0x0/0x32
[ 9071.352798] PM: Calling kvm_resume+0x0/0x27 [kvm]
[ 9071.352798] Enabling non-boot CPUs ...
[ 9071.352798] Booting Node 0 Processor 1 APIC 0x1
[ 9071.352798] smpboot cpu 1: start_ip = 9b000
[ 9071.250044] Initializing CPU#1
[ 9071.250044] Calibrating delay loop (skipped) already calibrated this CPU
[ 9071.364476] NMI watchdog enabled, takes one hw-pmu counter.
[ 9071.364721] CPU1 is up
[ 9071.365322] ACPI: Waking up from system sleep state S3
[ 9071.365730] calling reg-dummy+ @ 21729, parent: platform
[ 9071.365737] initcall reg-dummy_i+ returned 0 after 2 usecs
[ 9071.365764] calling 0000:00:00.0+ @ 21729, parent: pci0000:00
[ 9071.365793] initcall 0000:00:00.0_i+ returned 0 after 24 usecs
[ 9071.365796] calling 0000:00:01.0+ @ 21729, parent: pci0000:00
[ 9071.365813] initcall 0000:00:01.0_i+ returned 0 after 13 usecs
[ 9071.365816] calling 0000:00:09.0+ @ 21729, parent: pci0000:00
[ 9071.365836] pcieport 0000:00:09.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9071.365855] initcall 0000:00:09.0_i+ returned 0 after 33 usecs
[ 9071.365858] calling 0000:00:0a.0+ @ 21729, parent: pci0000:00
[ 9071.365875] pcieport 0000:00:0a.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9071.365891] initcall 0000:00:0a.0_i+ returned 0 after 28 usecs
[ 9071.365894] calling 0000:00:11.0+ @ 21729, parent: pci0000:00
[ 9071.365909] ahci 0000:00:11.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 9071.365940] initcall 0000:00:11.0_i+ returned 0 after 41 usecs
[ 9071.365942] calling 0000:00:12.0+ @ 21729, parent: pci0000:00
[ 9071.365974] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 9071.365979] initcall 0000:00:12.0_i+ returned 0 after 31 usecs
[ 9071.365981] calling 0000:00:12.1+ @ 21729, parent: pci0000:00
[ 9071.366010] ohci_hcd 0000:00:12.1: wake-up capability disabled by ACPI
[ 9071.366014] initcall 0000:00:12.1_i+ returned 0 after 28 usecs
[ 9071.366017] calling 0000:00:12.2+ @ 21729, parent: pci0000:00
[ 9071.380033] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0xfddff000-0xfddff0ff] (PCI address [0xfddff000-0xfddff0ff])
[ 9071.380063] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00112)
[ 9071.380079] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 9071.380084] ehci_hcd 0000:00:12.2: PME# disabled
[ 9071.380088] initcall 0000:00:12.2_i+ returned 0 after 13736 usecs
[ 9071.380091] calling 0000:00:13.0+ @ 21729, parent: pci0000:00
[ 9071.380120] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 9071.380124] initcall 0000:00:13.0_i+ returned 0 after 28 usecs
[ 9071.380127] calling 0000:00:13.1+ @ 21729, parent: pci0000:00
[ 9071.380155] ohci_hcd 0000:00:13.1: wake-up capability disabled by ACPI
[ 9071.380160] initcall 0000:00:13.1_i+ returned 0 after 28 usecs
[ 9071.380162] calling 0000:00:13.2+ @ 21729, parent: pci0000:00
[ 9071.396028] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xfddf6800-0xfddf68ff] (PCI address [0xfddf6800-0xfddf68ff])
[ 9071.396058] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00113)
[ 9071.396074] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 9071.396079] ehci_hcd 0000:00:13.2: PME# disabled
[ 9071.396083] initcall 0000:00:13.2_i+ returned 0 after 15543 usecs
[ 9071.396085] calling 0000:00:14.0+ @ 21729, parent: pci0000:00
[ 9071.396120] initcall 0000:00:14.0_i+ returned 0 after 30 usecs
[ 9071.396123] calling 0000:00:14.1+ @ 21729, parent: pci0000:00
[ 9071.396148] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 9071.396162] initcall 0000:00:14.1_i+ returned 0 after 34 usecs
[ 9071.396165] calling 0000:00:14.2+ @ 21729, parent: pci0000:00
[ 9071.396194] snd_hda_intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
[ 9071.396206] initcall 0000:00:14.2_i+ returned 0 after 36 usecs
[ 9071.396209] calling 0000:00:14.3+ @ 21729, parent: pci0000:00
[ 9071.396238] initcall 0000:00:14.3_i+ returned 0 after 24 usecs
[ 9071.396241] calling 0000:00:14.4+ @ 21729, parent: pci0000:00
[ 9071.396268] initcall 0000:00:14.4_i+ returned 0 after 23 usecs
[ 9071.396271] calling 0000:00:14.5+ @ 21729, parent: pci0000:00
[ 9071.396300] ohci_hcd 0000:00:14.5: wake-up capability disabled by ACPI
[ 9071.396304] initcall 0000:00:14.5_i+ returned 0 after 28 usecs
[ 9071.396307] calling 0000:00:18.0+ @ 21729, parent: pci0000:00
[ 9071.396317] initcall 0000:00:18.0_i+ returned 0 after 6 usecs
[ 9071.396319] calling 0000:00:18.1+ @ 21729, parent: pci0000:00
[ 9071.396329] initcall 0000:00:18.1_i+ returned 0 after 5 usecs
[ 9071.396331] calling 0000:00:18.2+ @ 21729, parent: pci0000:00
[ 9071.396340] initcall 0000:00:18.2_i+ returned 0 after 4 usecs
[ 9071.396343] calling 0000:00:18.3+ @ 21729, parent: pci0000:00
[ 9071.396354] initcall 0000:00:18.3_i+ returned 0 after 6 usecs
[ 9071.396356] calling 0000:01:05.0+ @ 21729, parent: 0000:00:01.0
[ 9071.396366] radeon 0000:01:05.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 9071.396377] radeon 0000:01:05.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
[ 9071.396387] initcall 0000:01:05.0_i+ returned 0 after 26 usecs
[ 9071.396391] calling 0000:04:00.0+ @ 21729, parent: 0000:00:0a.0
[ 9071.396412] r8169 0000:04:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebf0000)
[ 9071.396421] r8169 0000:04:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfcfe000c)
[ 9071.396427] r8169 0000:04:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfcfff00c)
[ 9071.396437] r8169 0000:04:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 9071.396469] initcall 0000:04:00.0_i+ returned 0 after 72 usecs
[ 9071.396503] calling pcspkr+ @ 21729, parent: platform
[ 9071.396508] initcall pcspkr_i+ returned 0 after 1 usecs
[ 9071.396511] calling alarmtimer+ @ 21729, parent: platform
[ 9071.396517] initcall alarmtimer_i+ returned 0 after 1 usecs
[ 9071.396523] calling serial8250+ @ 21729, parent: platform
[ 9071.396528] initcall serial8250_i+ returned 0 after 1 usecs
[ 9071.396533] calling i8042+ @ 21729, parent: platform
[ 9071.396538] initcall i8042_i+ returned 0 after 1 usecs
[ 9071.396540] calling serio0+ @ 21729, parent: i8042
[ 9071.396546] initcall serio0_i+ returned 0 after 1 usecs
[ 9071.396548] calling serio1+ @ 21729, parent: i8042
[ 9071.396553] initcall serio1_i+ returned 0 after 1 usecs
[ 9071.396559] calling usb1+ @ 21729, parent: 0000:00:12.2
[ 9071.396564] initcall usb1_i+ returned 0 after 1 usecs
[ 9071.396569] calling usb2+ @ 21729, parent: 0000:00:13.2
[ 9071.396573] initcall usb2_i+ returned 0 after 1 usecs
[ 9071.396577] calling usb3+ @ 21729, parent: 0000:00:12.0
[ 9071.396583] initcall usb3_i+ returned 0 after 1 usecs
[ 9071.396587] calling usb4+ @ 21729, parent: 0000:00:12.1
[ 9071.396592] initcall usb4_i+ returned 0 after 1 usecs
[ 9071.396596] calling usb5+ @ 21729, parent: 0000:00:13.0
[ 9071.396601] initcall usb5_i+ returned 0 after 1 usecs
[ 9071.396611] calling host0+ @ 21729, parent: 0000:00:14.1
[ 9071.396616] initcall host0_i+ returned 0 after 1 usecs
[ 9071.396619] calling host1+ @ 21729, parent: 0000:00:14.1
[ 9071.396624] initcall host1_i+ returned 0 after 1 usecs
[ 9071.396641] calling host2+ @ 21729, parent: 0000:00:11.0
[ 9071.396646] initcall host2_i+ returned 0 after 1 usecs
[ 9071.396648] calling host3+ @ 21729, parent: 0000:00:11.0
[ 9071.396653] initcall host3_i+ returned 0 after 1 usecs
[ 9071.396656] calling host4+ @ 21729, parent: 0000:00:11.0
[ 9071.396661] initcall host4_i+ returned 0 after 1 usecs
[ 9071.396664] calling host5+ @ 21729, parent: 0000:00:11.0
[ 9071.396669] initcall host5_i+ returned 0 after 1 usecs
[ 9071.396672] calling host6+ @ 21729, parent: 0000:00:11.0
[ 9071.396677] initcall host6_i+ returned 0 after 1 usecs
[ 9071.396680] calling host7+ @ 21729, parent: 0000:00:11.0
[ 9071.396685] initcall host7_i+ returned 0 after 1 usecs
[ 9071.396688] calling usb6+ @ 21729, parent: 0000:00:13.1
[ 9071.396693] initcall usb6_i+ returned 0 after 1 usecs
[ 9071.396696] calling usb7+ @ 21729, parent: 0000:00:14.5
[ 9071.396701] initcall usb7_i+ returned 0 after 1 usecs
[ 9071.396705] calling target1:0:0+ @ 21729, parent: host1
[ 9071.396710] initcall target1:0:0_i+ returned 0 after 1 usecs
[ 9071.396712] calling 1:0:0:0+ @ 21729, parent: target1:0:0
[ 9071.396717] initcall 1:0:0:0_i+ returned 0 after 1 usecs
[ 9071.396721] calling target1:0:1+ @ 21729, parent: host1
[ 9071.396726] initcall target1:0:1_i+ returned 0 after 1 usecs
[ 9071.396728] calling 1:0:1:0+ @ 21729, parent: target1:0:1
[ 9071.396733] initcall 1:0:1:0_i+ returned 0 after 1 usecs
[ 9071.396737] calling 3-3+ @ 21729, parent: usb3
[ 9071.396741] initcall 3-3_i+ returned 0 after 1 usecs
[ 9071.396745] calling target2:0:0+ @ 21729, parent: host2
[ 9071.396750] initcall target2:0:0_i+ returned 0 after 1 usecs
[ 9071.396753] calling 2:0:0:0+ @ 21729, parent: target2:0:0
[ 9071.396758] initcall 2:0:0:0_i+ returned 0 after 1 usecs
[ 9071.396761] calling target3:0:0+ @ 21729, parent: host3
[ 9071.396766] initcall target3:0:0_i+ returned 0 after 1 usecs
[ 9071.396769] calling 3:0:0:0+ @ 21729, parent: target3:0:0
[ 9071.396774] initcall 3:0:0:0_i+ returned 0 after 1 usecs
[ 9071.396781] calling input0+ @ 21729, parent: 3-3:1.0
[ 9071.396786] initcall input0_i+ returned 0 after 1 usecs
[ 9071.396793] calling 4-1+ @ 21729, parent: usb4
[ 9071.396798] initcall 4-1_i+ returned 0 after 1 usecs
[ 9071.396802] calling input1+ @ 21729, parent: 4-1:1.0
[ 9071.396807] initcall input1_i+ returned 0 after 1 usecs
[ 9071.396811] calling input2+ @ 21729, parent: 4-1:1.1
[ 9071.396815] initcall input2_i+ returned 0 after 1 usecs
[ 9071.396829] calling input3+ @ 21729, parent: PNP0C0C:00
[ 9071.396834] initcall input3_i+ returned 0 after 1 usecs
[ 9071.396837] calling input4+ @ 21729, parent: LNXPWRBN:00
[ 9071.396842] initcall input4_i+ returned 0 after 1 usecs
[ 9071.396850] calling SP5100 TCO timer+ @ 21729, parent: platform
[ 9071.396855] initcall SP5100 TCO timer_i+ returned 0 after 1 usecs
[ 9071.396860] calling i2c-0+ @ 21729, parent: none
[ 9071.396865] initcall i2c-0_i+ returned 0 after 1 usecs
[ 9071.396867] calling i2c-1+ @ 21729, parent: none
[ 9071.396872] initcall i2c-1_i+ returned 0 after 1 usecs
[ 9071.396875] calling i2c-2+ @ 21729, parent: none
[ 9071.396880] initcall i2c-2_i+ returned 0 after 1 usecs
[ 9071.396882] calling i2c-3+ @ 21729, parent: none
[ 9071.396887] initcall i2c-3_i+ returned 0 after 1 usecs
[ 9071.396890] calling i2c-4+ @ 21729, parent: none
[ 9071.396895] initcall i2c-4_i+ returned 0 after 1 usecs
[ 9071.396910] calling w83627ehf.656+ @ 21729, parent: platform
[ 9071.396916] initcall w83627ehf.656_i+ returned 0 after 1 usecs
[ 9071.396927] PM: early resume of devices complete after 31.199 msecs
[ 9071.396989] calling 0000:00:00.0+ @ 22117
[ 9071.396998] call 0000:00:00.0+ returned 0 after 3 usecs
[ 9071.397002] calling 0000:00:01.0+ @ 22117
[ 9071.397015] call 0000:00:01.0+ returned 0 after 9 usecs
[ 9071.397020] calling 0000:00:09.0+ @ 22117
[ 9071.397028] call 0000:00:09.0+ returned 0 after 4 usecs
[ 9071.397031] calling 0000:00:0a.0+ @ 22117
[ 9071.397038] call 0000:00:0a.0+ returned 0 after 2 usecs
[ 9071.397043] calling 0000:00:11.0+ @ 22115
[ 9071.397047] calling 0000:00:12.0+ @ 22117
[ 9071.397062] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9071.397066] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9071.397082] calling 0000:00:12.1+ @ 22100
[ 9071.397092] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9071.397111] calling 0000:00:12.2+ @ 22095
[ 9071.397122] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9071.397140] calling 0000:00:13.0+ @ 22094
[ 9071.397149] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9071.397166] call 0000:00:11.0+ returned 0 after 115 usecs
[ 9071.397171] calling 0000:00:13.1+ @ 22099
[ 9071.397173] calling 0000:00:13.2+ @ 22115
[ 9071.397181] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9071.397184] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9071.397298] calling 0000:00:14.0+ @ 22093
[ 9071.397304] call 0000:00:14.0+ returned 0 after 2 usecs
[ 9071.397306] calling 0000:00:14.1+ @ 22093
[ 9071.397315] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9071.397327] call 0000:00:14.1+ returned 0 after 16 usecs
[ 9071.397330] calling 0000:00:14.2+ @ 22093
[ 9071.397339] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9071.397350] calling 0000:00:14.3+ @ 21407
[ 9071.397355] call 0000:00:14.3+ returned 0 after 1 usecs
[ 9071.397358] calling 0000:00:14.4+ @ 21407
[ 9071.397367] call 0000:00:14.2+ returned 0 after 33 usecs
[ 9071.397373] call 0000:00:14.4+ returned 0 after 9 usecs
[ 9071.397375] calling 0000:00:14.5+ @ 22093
[ 9071.397379] calling 0000:00:18.0+ @ 21407
[ 9071.397384] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9071.397389] call 0000:00:18.0+ returned 0 after 2 usecs
[ 9071.397392] calling 0000:00:18.1+ @ 21407
[ 9071.397399] call 0000:00:18.1+ returned 0 after 3 usecs
[ 9071.397402] calling 0000:00:18.2+ @ 22116
[ 9071.397406] calling 0000:00:18.3+ @ 21407
[ 9071.397408] call 0000:00:18.2+ returned 0 after 1 usecs
[ 9071.397412] call 0000:00:18.3+ returned 0 after 1 usecs
[ 9071.397414] calling 0000:01:05.0+ @ 22116
[ 9071.397418] calling 0000:04:00.0+ @ 21407
[ 9071.397449] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9071.397454] radeon 0000:01:05.0: setting latency timer to 64
[ 9071.397485] calling reg-dummy+ @ 21729
[ 9071.397492] call reg-dummy+ returned 0 after 2 usecs
[ 9071.397498] calling LNXSYSTM:00+ @ 21729
[ 9071.397503] call LNXSYSTM:00+ returned 0 after 1 usecs
[ 9071.397505] calling LNXCPU:00+ @ 21729
[ 9071.397515] call LNXCPU:00+ returned 0 after 5 usecs
[ 9071.397518] calling LNXCPU:01+ @ 21729
[ 9071.397526] call LNXCPU:01+ returned 0 after 4 usecs
[ 9071.397528] calling LNXCPU:02+ @ 21729
[ 9071.397537] call LNXCPU:02+ returned 0 after 4 usecs
[ 9071.397539] calling LNXCPU:03+ @ 21729
[ 9071.397548] call LNXCPU:03+ returned 0 after 4 usecs
[ 9071.397550] calling device:00+ @ 21729
[ 9071.397557] call device:00+ returned 0 after 2 usecs
[ 9071.397559] calling PNP0A03:00+ @ 21729
[ 9071.397565] call PNP0A03:00+ returned 0 after 2 usecs
[ 9071.397568] calling device:01+ @ 21729
[ 9071.397574] call device:01+ returned 0 after 2 usecs
[ 9071.397577] calling PNP0C02:00+ @ 21729
[ 9071.397583] call PNP0C02:00+ returned 0 after 2 usecs
[ 9071.397586] calling device:02+ @ 21729
[ 9071.397592] call device:02+ returned 0 after 2 usecs
[ 9071.397595] calling device:03+ @ 21729
[ 9071.397601] call device:03+ returned 0 after 2 usecs
[ 9071.397604] calling device:04+ @ 21729
[ 9071.397610] call device:04+ returned 0 after 2 usecs
[ 9071.397612] calling device:05+ @ 21729
[ 9071.397619] call device:05+ returned 0 after 2 usecs
[ 9071.397621] calling device:06+ @ 21729
[ 9071.397628] call device:06+ returned 0 after 2 usecs
[ 9071.397631] calling device:07+ @ 21729
[ 9071.397636] call device:07+ returned 0 after 2 usecs
[ 9071.397639] calling device:08+ @ 21729
[ 9071.397805] call device:08+ returned 0 after 2 usecs
[ 9071.397808] calling device:09+ @ 21729
[ 9071.397813] call device:09+ returned 0 after 2 usecs
[ 9071.397816] calling device:0a+ @ 21729
[ 9071.397822] call device:0a+ returned 0 after 2 usecs
[ 9071.397825] calling device:0b+ @ 21729
[ 9071.397831] call device:0b+ returned 0 after 2 usecs
[ 9071.397833] calling device:0c+ @ 21729
[ 9071.397838] call device:0c+ returned 0 after 1 usecs
[ 9071.397840] calling device:0d+ @ 21729
[ 9071.397845] call device:0d+ returned 0 after 1 usecs
[ 9071.397847] calling device:0e+ @ 21729
[ 9071.397852] call device:0e+ returned 0 after 1 usecs
[ 9071.397855] calling device:0f+ @ 21729
[ 9071.397859] call device:0f+ returned 0 after 1 usecs
[ 9071.397862] calling device:10+ @ 21729
[ 9071.397866] call device:10+ returned 0 after 1 usecs
[ 9071.397869] calling device:11+ @ 21729
[ 9071.397874] call device:11+ returned 0 after 1 usecs
[ 9071.397876] calling device:12+ @ 21729
[ 9071.397881] call device:12+ returned 0 after 1 usecs
[ 9071.397883] calling device:13+ @ 21729
[ 9071.397888] call device:13+ returned 0 after 1 usecs
[ 9071.397891] calling device:14+ @ 21729
[ 9071.397895] call device:14+ returned 0 after 1 usecs
[ 9071.397898] calling device:15+ @ 21729
[ 9071.397903] call device:15+ returned 0 after 1 usecs
[ 9071.397905] calling PNP0000:00+ @ 21729
[ 9071.397910] call PNP0000:00+ returned 0 after 1 usecs
[ 9071.397912] calling PNP0200:00+ @ 21729
[ 9071.397917] call PNP0200:00+ returned 0 after 1 usecs
[ 9071.397919] calling PNP0100:00+ @ 21729
[ 9071.397924] call PNP0100:00+ returned 0 after 1 usecs
[ 9071.397926] calling PNP0B00:00+ @ 21729
[ 9071.397931] call PNP0B00:00+ returned 0 after 1 usecs
[ 9071.397934] calling PNP0800:00+ @ 21729
[ 9071.397938] call PNP0800:00+ returned 0 after 1 usecs
[ 9071.397941] calling PNP0C04:00+ @ 21729
[ 9071.397946] call PNP0C04:00+ returned 0 after 1 usecs
[ 9071.397948] calling PNP0103:00+ @ 21729
[ 9071.397953] call PNP0103:00+ returned 0 after 1 usecs
[ 9071.397956] calling PNP0C02:01+ @ 21729
[ 9071.397961] call PNP0C02:01+ returned 0 after 1 usecs
[ 9071.397963] calling PNP0C02:02+ @ 21729
[ 9071.397968] call PNP0C02:02+ returned 0 after 1 usecs
[ 9071.397971] calling PNP0501:00+ @ 21729
[ 9071.397976] call PNP0501:00+ returned 0 after 1 usecs
[ 9071.397978] calling PNP0C02:03+ @ 21729
[ 9071.397983] call PNP0C02:03+ returned 0 after 1 usecs
[ 9071.397985] calling PNP0C02:04+ @ 21729
[ 9071.397990] call PNP0C02:04+ returned 0 after 1 usecs
[ 9071.397993] calling device:16+ @ 21729
[ 9071.397997] call device:16+ returned 0 after 1 usecs
[ 9071.398000] calling device:17+ @ 21729
[ 9071.398005] call device:17+ returned 0 after 1 usecs
[ 9071.398007] calling device:18+ @ 21729
[ 9071.398012] call device:18+ returned 0 after 1 usecs
[ 9071.398014] calling device:19+ @ 21729
[ 9071.398019] call device:19+ returned 0 after 1 usecs
[ 9071.398022] calling device:1a+ @ 21729
[ 9071.398026] call device:1a+ returned 0 after 1 usecs
[ 9071.398029] calling device:1b+ @ 21729
[ 9071.398033] call device:1b+ returned 0 after 1 usecs
[ 9071.398036] calling device:1c+ @ 21729
[ 9071.398040] call device:1c+ returned 0 after 1 usecs
[ 9071.398043] calling device:1d+ @ 21729
[ 9071.398048] call device:1d+ returned 0 after 1 usecs
[ 9071.398050] calling device:1e+ @ 21729
[ 9071.398055] call device:1e+ returned 0 after 1 usecs
[ 9071.398057] calling device:1f+ @ 21729
[ 9071.398062] call device:1f+ returned 0 after 1 usecs
[ 9071.398064] calling device:20+ @ 21729
[ 9071.398069] call device:20+ returned 0 after 1 usecs
[ 9071.398072] calling PNP0C01:00+ @ 21729
[ 9071.398077] call PNP0C01:00+ returned 0 after 1 usecs
[ 9071.398079] calling PNP0C0C:00+ @ 21729
[ 9071.398084] call PNP0C0C:00+ returned 0 after 2 usecs
[ 9071.398087] calling PNP0C0F:00+ @ 21729
[ 9071.398092] call PNP0C0F:00+ returned 0 after 1 usecs
[ 9071.398094] calling PNP0C0F:01+ @ 21729
[ 9071.398099] call PNP0C0F:01+ returned 0 after 1 usecs
[ 9071.398101] calling PNP0C0F:02+ @ 21729
[ 9071.398106] call PNP0C0F:02+ returned 0 after 1 usecs
[ 9071.398109] calling PNP0C0F:03+ @ 21729
[ 9071.398114] call PNP0C0F:03+ returned 0 after 1 usecs
[ 9071.398116] calling PNP0C0F:04+ @ 21729
[ 9071.398121] call PNP0C0F:04+ returned 0 after 1 usecs
[ 9071.398124] calling PNP0C0F:05+ @ 21729
[ 9071.398128] call PNP0C0F:05+ returned 0 after 1 usecs
[ 9071.398131] calling PNP0C0F:06+ @ 21729
[ 9071.398136] call PNP0C0F:06+ returned 0 after 1 usecs
[ 9071.398138] calling PNP0C0F:07+ @ 21729
[ 9071.398143] call PNP0C0F:07+ returned 0 after 1 usecs
[ 9071.398146] calling device:21+ @ 21729
[ 9071.398150] call device:21+ returned 0 after 1 usecs
[ 9071.398153] calling PNP0C14:00+ @ 21729
[ 9071.398158] call PNP0C14:00+ returned 0 after 1 usecs
[ 9071.398160] calling LNXPWRBN:00+ @ 21729
[ 9071.398165] call LNXPWRBN:00+ returned 0 after 1 usecs
[ 9071.398174] calling 00:00+ @ 21729
[ 9071.398179] call 00:00+ returned 0 after 1 usecs
[ 9071.398181] calling 00:01+ @ 21729
[ 9071.398282] calling host0+ @ 22126
[ 9071.398288] call host0+ returned 0 after 2 usecs
[ 9071.398291] calling host1+ @ 22126
[ 9071.398298] call host1+ returned 0 after 2 usecs
[ 9071.398301] calling host2+ @ 22126
[ 9071.398306] call host2+ returned 0 after 1 usecs
[ 9071.398309] calling host3+ @ 22126
[ 9071.398314] call host3+ returned 0 after 1 usecs
[ 9071.398317] calling host4+ @ 22126
[ 9071.398322] call host4+ returned 0 after 1 usecs
[ 9071.398325] calling host5+ @ 22126
[ 9071.398330] call host5+ returned 0 after 1 usecs
[ 9071.398333] calling host6+ @ 22126
[ 9071.398338] call host6+ returned 0 after 1 usecs
[ 9071.398341] calling host7+ @ 22126
[ 9071.398346] call host7+ returned 0 after 1 usecs
[ 9071.398457] calling target1:0:0+ @ 22134
[ 9071.398462] call target1:0:0+ returned 0 after 1 usecs
[ 9071.398466] calling 1:0:0:0+ @ 22134
[ 9071.398474] call 1:0:0:0+ returned 0 after 5 usecs
[ 9071.398478] calling target1:0:1+ @ 22134
[ 9071.398483] call target1:0:1+ returned 0 after 1 usecs
[ 9071.398485] calling 1:0:1:0+ @ 22134
[ 9071.398491] call 1:0:1:0+ returned 0 after 2 usecs
[ 9071.398549] calling target2:0:0+ @ 22138
[ 9071.398554] call target2:0:0+ returned 0 after 1 usecs
[ 9071.398557] calling 2:0:0:0+ @ 22138
[ 9071.398562] sd 2:0:0:0: [sda] Starting disk
[ 9071.398618] calling target3:0:0+ @ 22140
[ 9071.398623] call target3:0:0+ returned 0 after 1 usecs
[ 9071.398626] calling 3:0:0:0+ @ 22140
[ 9071.398630] sd 3:0:0:0: [sdb] Starting disk
[ 9071.398777] pcieport 0000:00:0a.0: wake-up capability disabled by ACPI
[ 9071.398783] r8169 0000:04:00.0: PME# disabled
[ 9071.402300] call 0000:04:00.0+ returned 0 after 4765 usecs
[ 9071.402323] call 00:01+ returned 0 after 4041 usecs
[ 9071.402326] calling 00:02+ @ 21729
[ 9071.402331] call 00:02+ returned 0 after 1 usecs
[ 9071.402333] calling 00:03+ @ 21729
[ 9071.402615] call 00:03+ returned 0 after 271 usecs
[ 9071.402618] calling 00:04+ @ 21729
[ 9071.402623] call 00:04+ returned 0 after 1 usecs
[ 9071.402626] calling 00:05+ @ 21729
[ 9071.402631] call 00:05+ returned 0 after 1 usecs
[ 9071.402633] calling 00:06+ @ 21729
[ 9071.402638] call 00:06+ returned 0 after 1 usecs
[ 9071.402640] calling 00:07+ @ 21729
[ 9071.402761] call 00:07+ returned 0 after 115 usecs
[ 9071.402764] calling 00:08+ @ 21729
[ 9071.402770] call 00:08+ returned 0 after 2 usecs
[ 9071.402772] calling 00:09+ @ 21729
[ 9071.403269] serial 00:09: activated
[ 9071.403277] call 00:09+ returned 0 after 489 usecs
[ 9071.403280] calling 00:0a+ @ 21729
[ 9071.403285] call 00:0a+ returned 0 after 1 usecs
[ 9071.403288] calling 00:0b+ @ 21729
[ 9071.403293] call 00:0b+ returned 0 after 1 usecs
[ 9071.403296] calling 00:0c+ @ 21729
[ 9071.403301] call 00:0c+ returned 0 after 1 usecs
[ 9071.403350] calling pcspkr+ @ 21729
[ 9071.403355] call pcspkr+ returned 0 after 1 usecs
[ 9071.403358] calling alarmtimer+ @ 21729
[ 9071.403363] call alarmtimer+ returned 0 after 1 usecs
[ 9071.403371] calling serial8250+ @ 21729
[ 9071.403376] call serial8250+ returned 0 after 2 usecs
[ 9071.403382] calling i8042+ @ 21729
[ 9071.406319] call i8042+ returned 0 after 2861 usecs
[ 9071.406331] calling serio0+ @ 21729
[ 9071.406337] call serio0+ returned 0 after 2 usecs
[ 9071.406339] calling serio1+ @ 21729
[ 9071.406344] call serio1+ returned 0 after 1 usecs
[ 9071.406348] calling rtc0+ @ 21729
[ 9071.406378] call rtc0+ returned 0 after 25 usecs
[ 9071.416162] r8169 0000:04:00.0: eth3: link down
[ 9071.420028] call 0000:00:14.5+ returned 0 after 22116 usecs
[ 9071.420035] calling usb7+ @ 22130
[ 9071.420048] call 0000:00:12.0+ returned 0 after 22458 usecs
[ 9071.420056] calling usb3+ @ 22105
[ 9071.420082] call 0000:00:13.1+ returned 0 after 22369 usecs
[ 9071.420088] calling usb6+ @ 22126
[ 9071.420099] call 0000:00:13.0+ returned 0 after 22416 usecs
[ 9071.420122] call 0000:00:13.2+ returned 0 after 22406 usecs
[ 9071.420127] calling usb5+ @ 22108
[ 9071.420136] calling usb2+ @ 22101
[ 9071.420152] call 0000:00:12.1+ returned 0 after 22524 usecs
[ 9071.420158] calling usb4+ @ 22113
[ 9071.420177] call 0000:00:12.2+ returned 0 after 22521 usecs
[ 9071.420182] calling usb1+ @ 22107
[ 9071.426701] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 9071.426878] radeon 0000:01:05.0: WB enabled
[ 9071.448044] call usb2+ returned 0 after 27250 usecs
[ 9071.457811] [drm] ring test succeeded in 1 usecs
[ 9071.457825] [drm] ib test succeeded in 0 usecs
[ 9071.457845] [drm:drm_crtc_helper_set_config],
[ 9071.457847] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9071.457856] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 9071.457861] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 9071.457864] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 9071.457867] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9071.457870] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 9071.457873] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9071.457884] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 9071.457890] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 9071.457894] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9071.457911] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9071.457929] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 9071.472044] call usb1+ returned 0 after 50641 usecs
[ 9071.472072] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:19:1280x1024]
[ 9071.480057] [drm:avivo_crtc_load_lut], 0
[ 9071.480069] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 9071.480084] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 9071.480087] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] set DPMS on
[ 9071.480091] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9071.480097] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9071.500044] call usb7+ returned 0 after 78130 usecs
[ 9071.500070] call usb3+ returned 0 after 78135 usecs
[ 9071.500090] call usb4+ returned 0 after 78055 usecs
[ 9071.500106] calling 4-1+ @ 22142
[ 9071.500130] call usb5+ returned 0 after 78124 usecs
[ 9071.500158] call usb6+ returned 0 after 78190 usecs
[ 9071.500182] calling 3-3+ @ 22134
[ 9071.512584] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9071.512590] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000000
[ 9071.512607] call 0000:01:05.0+ returned 0 after 112487 usecs
[ 9071.549114] call 3-3+ returned 0 after 47780 usecs
[ 9071.551106] call 4-1+ returned 0 after 49800 usecs
[ 9071.568502] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[ 9071.568506] ata2.01: ACPI cmd ef/03:42:00:00:00:b0 (SET FEATURES) filtered out
[ 9071.568510] ata2.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE LOCK) filtered out
[ 9071.576499] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 9071.576503] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 9071.576507] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 9071.584432] ata2.00: configured for UDMA/33
[ 9071.600430] ata2.01: configured for UDMA/33
[ 9071.716043] ata8: SATA link down (SStatus 0 SControl 300)
[ 9071.716074] ata5: SATA link down (SStatus 0 SControl 300)
[ 9071.716110] ata6: SATA link down (SStatus 0 SControl 300)
[ 9071.716142] ata7: SATA link down (SStatus 0 SControl 300)
[ 9071.972025] ata3: softreset failed (device not ready)
[ 9071.972029] ata3: applying PMP SRST workaround and retrying
[ 9072.144038] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9072.144736] ata3.00: configured for UDMA/100
[ 9072.160226] call 2:0:0:0+ returned 0 after 743810 usecs
[ 9073.152542] r8169 0000:04:00.0: eth3: link up
[ 9081.408027] ata4: softreset failed (device not ready)
[ 9085.092047] ata4: softreset failed (device not ready)
[ 9085.092050] ata4: applying PMP SRST workaround and retrying
[ 9085.264029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9085.276328] ata4.00: configured for UDMA/100
[ 9085.325636] call 3:0:0:0+ returned 0 after 13600589 usecs
[ 9085.325661] calling input0+ @ 21729
[ 9085.325667] call input0+ returned 0 after 2 usecs
[ 9085.325678] calling input1+ @ 21729
[ 9085.325716] call input1+ returned 0 after 33 usecs
[ 9085.325721] calling input2+ @ 21729
[ 9085.325738] call input2+ returned 0 after 13 usecs
[ 9085.325757] calling input3+ @ 21729
[ 9085.325774] call input3+ returned 0 after 13 usecs
[ 9085.325777] calling input4+ @ 21729
[ 9085.325793] call input4+ returned 0 after 12 usecs
[ 9085.325805] calling ttm+ @ 21729
[ 9085.325810] call ttm+ returned 0 after 1 usecs
[ 9085.325814] calling SP5100 TCO timer+ @ 21729
[ 9085.325819] call SP5100 TCO timer+ returned 0 after 1 usecs
[ 9085.325822] calling controlD64+ @ 21729
[ 9085.325827] call controlD64+ returned 0 after 1 usecs
[ 9085.325830] calling card0+ @ 21729
[ 9085.325835] call card0+ returned 0 after 1 usecs
[ 9085.325838] calling i2c-0+ @ 21729
[ 9085.325843] call i2c-0+ returned 0 after 1 usecs
[ 9085.325846] calling i2c-1+ @ 21729
[ 9085.325851] call i2c-1+ returned 0 after 1 usecs
[ 9085.325853] calling i2c-2+ @ 21729
[ 9085.325858] call i2c-2+ returned 0 after 1 usecs
[ 9085.325861] calling i2c-3+ @ 21729
[ 9085.325865] call i2c-3+ returned 0 after 1 usecs
[ 9085.325868] calling i2c-4+ @ 21729
[ 9085.325873] call i2c-4+ returned 0 after 1 usecs
[ 9085.325876] calling card0-VGA-1+ @ 21729
[ 9085.325881] call card0-VGA-1+ returned 0 after 1 usecs
[ 9085.325884] calling card0-DVI-D-1+ @ 21729
[ 9085.325888] call card0-DVI-D-1+ returned 0 after 1 usecs
[ 9085.325910] calling w83627ehf.656+ @ 21729
[ 9085.325915] call w83627ehf.656+ returned 0 after 1 usecs
[ 9085.325930] PM: resume of devices complete after 13928.968 msecs
[ 9085.326530] PM: Finishing wakeup.
[ 9085.326532] Restarting tasks ... done.
[ 9085.414092] [drm:drm_mode_setcrtc], [CRTC:10]
[ 9085.414127] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 9085.414133] [drm:drm_crtc_helper_set_config],
[ 9085.414137] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 9085.414160] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 9085.414169] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 9085.414173] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 9085.414178] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9085.414183] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 9085.414188] [drm:drm_mode_debug_printmodeline], Modeline 16:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
[ 9085.414203] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 9085.414218] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 9085.414228] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9085.414288] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9085.414364] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 9085.428082] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:16:]
[ 9085.436072] [drm:avivo_crtc_load_lut], 0
[ 9085.436088] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 9085.436103] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 9085.436107] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] set DPMS on
[ 9085.436111] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9085.436117] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9085.452975] [drm:drm_mode_setcrtc], [CRTC:11]
[ 9085.452980] [drm:drm_crtc_helper_set_config],
[ 9085.452984] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9085.452989] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9085.452997] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000000
[ 9085.453050] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9085.453057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9085.468351] [drm:radeon_atom_dac_detect], Bios 0 scratch 0 00000001
[ 9085.468361] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9085.468367] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9085.468382] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9085.468385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9085.480354] [drm:radeon_atom_dac_detect], Bios 0 scratch 0 00000001
[ 9085.480368] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9085.480374] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9085.480411] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9085.480415] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 9085.538719] [drm:radeon_atombios_connected_scratch_regs], DFP3 connected
[ 9085.538761] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] probed modes :
[ 9085.538766] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9085.538772] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 9085.538777] [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 9085.538783] [drm:drm_mode_debug_printmodeline], Modeline 41:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 9085.538789] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 9085.538794] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 9085.538800] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 9085.538806] [drm:drm_mode_debug_printmodeline], Modeline 33:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 9085.538812] [drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 9085.538817] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 9085.538823] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 9085.538828] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 9085.538834] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 9085.538840] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 9085.538846] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 9085.538851] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 9085.538856] [drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 9085.538877] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9205.408325] [drm:drm_crtc_helper_set_config],
[ 9205.408334] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9205.408355] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 9205.408364] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 9205.408371] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 9205.408378] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9205.408387] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 9205.408394] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9205.408416] [drm:radeon_encoder_set_active_device], setting active device to 00000200 from 00000200 00000200 for encoder 2
[ 9205.408431] [drm:drm_crtc_helper_set_mode], [CRTC:10]
[ 9205.408440] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 3, devices 00000200, active_devices 00000200
[ 9205.408474] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9205.408508] [drm:radeon_compute_pll_avivo], 10793, pll dividers - fb: 407.0 ref: 6, post 9
[ 9205.424088] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TMDS-14] set [MODE:19:1280x1024]
[ 9205.432051] [drm:avivo_crtc_load_lut], 0
[ 9205.432073] [drm:radeon_atom_encoder_dpms], encoder dpms 31 to mode 0, devices 00000200, active_devices 00000200
[ 9205.432092] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 9205.432099] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] set DPMS on
[ 9205.432106] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9205.432129] [drm:avivo_crtc_load_lut], 0
[ 9205.432149] [drm:avivo_crtc_load_lut], 0
[ 9205.451088] [drm:drm_crtc_helper_set_config],
[ 9205.451093] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9205.451111] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9205.451119] [drm:drm_crtc_helper_set_config],
[ 9205.451124] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9205.451131] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9205.451152] [drm:drm_crtc_helper_set_config],
[ 9205.451157] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9205.451171] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9205.451191] [drm:drm_crtc_helper_set_config],
[ 9205.451196] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9205.451211] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9205.451220] [drm:avivo_crtc_load_lut], 0
[ 9205.451240] [drm:avivo_crtc_load_lut], 0
[ 9205.470214] [drm:avivo_crtc_load_lut], 0
[ 9214.208964] [drm:avivo_crtc_load_lut], 0
[ 9214.209010] [drm:drm_mode_setcrtc], [CRTC:10]
[ 9214.209032] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 9214.209041] [drm:drm_crtc_helper_set_config],
[ 9214.209048] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 9214.209092] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9214.209156] [drm:drm_mode_setcrtc], [CRTC:11]
[ 9214.209163] [drm:drm_crtc_helper_set_config],
[ 9214.209168] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9214.209183] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9214.209356] [drm:avivo_crtc_load_lut], 0
[ 9214.209407] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9214.209418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9214.224373] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9214.224392] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9214.224403] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9214.224430] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9214.224438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9214.236369] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9214.236380] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9214.236388] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9214.236438] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9214.236447] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 9214.293990] [drm:radeon_atombios_connected_scratch_regs], DFP3 connected
[ 9214.294077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] probed modes :
[ 9214.294088] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9214.294103] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 9214.294117] [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 9214.294131] [drm:drm_mode_debug_printmodeline], Modeline 41:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 9214.294145] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 9214.294159] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 9214.294174] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 9214.294188] [drm:drm_mode_debug_printmodeline], Modeline 33:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 9214.294202] [drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 9214.294216] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 9214.294230] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 9214.294244] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 9214.294258] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 9214.294272] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 9214.294286] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 9214.294300] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 9214.294314] [drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 9214.294337] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9226.428515] [drm:drm_crtc_helper_set_config],
[ 9226.428524] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9226.428550] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9226.428570] [drm:drm_crtc_helper_set_config],
[ 9226.428576] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9226.428585] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9226.428620] [drm:drm_crtc_helper_set_config],
[ 9226.428625] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9226.428640] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9226.428664] [drm:drm_crtc_helper_set_config],
[ 9226.428669] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9226.428684] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9226.428694] [drm:avivo_crtc_load_lut], 0
[ 9226.428716] [drm:avivo_crtc_load_lut], 0
[ 9226.447681] [drm:avivo_crtc_load_lut], 0
[ 9227.242045] [drm:avivo_crtc_load_lut], 0
[ 9227.242089] [drm:drm_mode_setcrtc], [CRTC:10]
[ 9227.242111] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 9227.242119] [drm:drm_crtc_helper_set_config],
[ 9227.242126] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 9227.242168] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9227.242229] [drm:drm_mode_setcrtc], [CRTC:11]
[ 9227.242235] [drm:drm_crtc_helper_set_config],
[ 9227.242240] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9227.242255] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9227.242432] [drm:avivo_crtc_load_lut], 0
[ 9227.242477] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9227.242490] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9227.260363] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9227.260384] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9227.260397] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9227.260426] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9227.260434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9227.272342] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9227.272353] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9227.272361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9227.272405] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9227.272414] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 9227.329778] [drm:radeon_atombios_connected_scratch_regs], DFP3 connected
[ 9227.329867] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] probed modes :
[ 9227.329877] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9227.329892] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 9227.329907] [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 9227.329921] [drm:drm_mode_debug_printmodeline], Modeline 41:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 9227.329935] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 9227.329950] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 9227.329965] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 9227.329979] [drm:drm_mode_debug_printmodeline], Modeline 33:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 9227.329993] [drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 9227.330007] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 9227.330022] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 9227.330036] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 9227.330050] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 9227.330063] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 9227.330078] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 9227.330091] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 9227.330105] [drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 9227.330129] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9228.100611] [drm:drm_crtc_helper_set_config],
[ 9228.100619] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9228.100646] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9228.100670] [drm:drm_crtc_helper_set_config],
[ 9228.100676] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9228.100684] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9228.100720] [drm:drm_crtc_helper_set_config],
[ 9228.100725] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9228.100740] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9228.100766] [drm:drm_crtc_helper_set_config],
[ 9228.100771] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:35] #connectors=1 (x y) (0 0)
[ 9228.100787] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9228.100797] [drm:avivo_crtc_load_lut], 0
[ 9228.100816] [drm:avivo_crtc_load_lut], 0
[ 9228.119796] [drm:avivo_crtc_load_lut], 0
[ 9229.074543] [drm:avivo_crtc_load_lut], 0
[ 9229.074592] [drm:drm_mode_setcrtc], [CRTC:10]
[ 9229.074619] [drm:drm_mode_setcrtc], [CONNECTOR:15:DVI-D-1]
[ 9229.074631] [drm:drm_crtc_helper_set_config],
[ 9229.074639] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:36] #connectors=1 (x y) (0 0)
[ 9229.074683] [drm:drm_crtc_helper_set_config], [CONNECTOR:15:DVI-D-1] to [CRTC:10]
[ 9229.074750] [drm:drm_mode_setcrtc], [CRTC:11]
[ 9229.074757] [drm:drm_crtc_helper_set_config],
[ 9229.074763] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB]
[ 9229.074776] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000
[ 9229.074971] [drm:avivo_crtc_load_lut], 0
[ 9229.075018] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9229.075030] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9229.088385] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9229.088404] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9229.088417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9229.088443] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[ 9229.088451] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1]
[ 9229.100397] [drm:radeon_atom_dac_detect], Bios 0 scratch 200000 00000001
[ 9229.100410] [drm:radeon_atombios_connected_scratch_regs], CRT1 disconnected
[ 9229.100419] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:VGA-1] disconnected
[ 9229.100469] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 9229.100478] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1]
[ 9229.161909] [drm:radeon_atombios_connected_scratch_regs], DFP3 connected
[ 9229.162005] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:DVI-D-1] probed modes :
[ 9229.162015] [drm:drm_mode_debug_printmodeline], Modeline 18:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
[ 9229.162031] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 9229.162045] [drm:drm_mode_debug_printmodeline], Modeline 20:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[ 9229.162059] [drm:drm_mode_debug_printmodeline], Modeline 41:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 9229.162073] [drm:drm_mode_debug_printmodeline], Modeline 30:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 9229.162087] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[ 9229.162101] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 9229.162115] [drm:drm_mode_debug_printmodeline], Modeline 33:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[ 9229.162128] [drm:drm_mode_debug_printmodeline], Modeline 40:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[ 9229.162142] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 9229.162156] [drm:drm_mode_debug_printmodeline], Modeline 22:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 9229.162170] [drm:drm_mode_debug_printmodeline], Modeline 23:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[ 9229.162184] [drm:drm_mode_debug_printmodeline], Modeline 25:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[ 9229.162198] [drm:drm_mode_debug_printmodeline], Modeline 24:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 9229.162211] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[ 9229.162225] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 9229.162238] [drm:drm_mode_debug_printmodeline], Modeline 28:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 9229.162279] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-08-11 12:18 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-25 19:14 Linux 3.2: After resume screen only turned on after switching terminals Paul Menzel
2012-06-26 5:42 ` Michel Dänzer
2012-06-30 19:00 ` Paul Menzel
2012-07-04 13:41 ` Paul Menzel
2012-07-04 13:55 ` Alex Deucher
2012-07-04 14:11 ` Paul Menzel
2012-07-05 12:58 ` Alex Deucher
2012-07-06 15:34 ` Paul Menzel
2012-07-06 15:39 ` Paul Menzel
2012-08-11 12:17 ` Paul Menzel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.