* [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree
@ 2012-07-07 14:56 ` Richard Zhao
0 siblings, 0 replies; 44+ messages in thread
From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw)
To: linux-usb-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg,
marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
alexander.shishkin-VuQAYsv1563Yd54FQh9/CA,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
dong.aisheng-QSEj5FYQhm4dnm+yROfE0A,
stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz,
richard.zhao-KZfg59tc24xl57MIdRCFDg,
linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0,
mkl-bIcnvbaLZ9MEGnE8C9+IrQ
The work is based on ci13xxx rework done by Alexander Shishkin.
To let Greg pick up, I also added patches Alex queued that I depends on.
This patch series can also be found at:
https://github.com/riczhao/kernel-imx/commits/topics/usb-driver
Status:
- this version only support host
- usbotg controler works at host role
Changes since last version:
- Rebase patch that Greg failed to merge.
Richard Zhao (9):
USB: Chipidea: rename struct ci13xxx variables from udc to ci
USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform
drivers
USB: Chipidea: add ci13xxx device id management
usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of
Kconfig
usb: otg: add notify_connect/notify_disconnect callback
USB: notify phy when root hub port connect change
usb: chipidea: permit driver bindings pass phy pointer
usb: otg: add basic mxs phy driver support
usb: chipidea: add imx platform driver
.../devicetree/bindings/usb/ci13xxx-imx.txt | 18 +
Documentation/devicetree/bindings/usb/mxs-phy.txt | 13 +
drivers/usb/chipidea/Kconfig | 1 +
drivers/usb/chipidea/Makefile | 3 +
drivers/usb/chipidea/ci.h | 28 +-
drivers/usb/chipidea/ci13xxx_imx.c | 198 ++++++
drivers/usb/chipidea/ci13xxx_msm.c | 46 +-
drivers/usb/chipidea/ci13xxx_pci.c | 34 +-
drivers/usb/chipidea/core.c | 58 ++
drivers/usb/chipidea/debug.c | 146 ++---
drivers/usb/chipidea/host.c | 1 +
drivers/usb/chipidea/udc.c | 631 ++++++++++----------
drivers/usb/core/hub.c | 8 +
drivers/usb/otg/Kconfig | 10 +
drivers/usb/otg/Makefile | 1 +
drivers/usb/otg/mxs-phy.c | 186 ++++++
include/linux/usb/chipidea.h | 12 +-
include/linux/usb/otg.h | 21 +
18 files changed, 953 insertions(+), 462 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt
create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c
create mode 100644 drivers/usb/otg/mxs-phy.c
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 44+ messages in thread* [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel The work is based on ci13xxx rework done by Alexander Shishkin. To let Greg pick up, I also added patches Alex queued that I depends on. This patch series can also be found at: https://github.com/riczhao/kernel-imx/commits/topics/usb-driver Status: - this version only support host - usbotg controler works at host role Changes since last version: - Rebase patch that Greg failed to merge. Richard Zhao (9): USB: Chipidea: rename struct ci13xxx variables from udc to ci USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers USB: Chipidea: add ci13xxx device id management usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig usb: otg: add notify_connect/notify_disconnect callback USB: notify phy when root hub port connect change usb: chipidea: permit driver bindings pass phy pointer usb: otg: add basic mxs phy driver support usb: chipidea: add imx platform driver .../devicetree/bindings/usb/ci13xxx-imx.txt | 18 + Documentation/devicetree/bindings/usb/mxs-phy.txt | 13 + drivers/usb/chipidea/Kconfig | 1 + drivers/usb/chipidea/Makefile | 3 + drivers/usb/chipidea/ci.h | 28 +- drivers/usb/chipidea/ci13xxx_imx.c | 198 ++++++ drivers/usb/chipidea/ci13xxx_msm.c | 46 +- drivers/usb/chipidea/ci13xxx_pci.c | 34 +- drivers/usb/chipidea/core.c | 58 ++ drivers/usb/chipidea/debug.c | 146 ++--- drivers/usb/chipidea/host.c | 1 + drivers/usb/chipidea/udc.c | 631 ++++++++++---------- drivers/usb/core/hub.c | 8 + drivers/usb/otg/Kconfig | 10 + drivers/usb/otg/Makefile | 1 + drivers/usb/otg/mxs-phy.c | 186 ++++++ include/linux/usb/chipidea.h | 12 +- include/linux/usb/otg.h | 21 + 18 files changed, 953 insertions(+), 462 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c create mode 100644 drivers/usb/otg/mxs-phy.c -- 1.7.9.5 ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <1341673008-29808-1-git-send-email-richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>]
* [PATCH v9 REBASE 1/9] USB: Chipidea: rename struct ci13xxx variables from udc to ci 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ struct ci13xxx represent the controller, which may be device or host, so name its variables as ci. Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> Reviewed-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> --- drivers/usb/chipidea/ci.h | 26 +- drivers/usb/chipidea/ci13xxx_msm.c | 12 +- drivers/usb/chipidea/debug.c | 146 ++++----- drivers/usb/chipidea/udc.c | 628 ++++++++++++++++++------------------ include/linux/usb/chipidea.h | 2 +- 5 files changed, 407 insertions(+), 407 deletions(-) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 0b09330..9655e35 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -36,7 +36,7 @@ * @name: string description of the endpoint * @qh: queue head for this endpoint * @wedge: is the endpoint wedged - * @udc: pointer to the controller + * @ci: pointer to the controller * @lock: pointer to controller's spinlock * @td_pool: pointer to controller's TD pool */ @@ -54,7 +54,7 @@ struct ci13xxx_ep { int wedge; /* global resources */ - struct ci13xxx *udc; + struct ci13xxx *ci; spinlock_t *lock; struct dma_pool *td_pool; }; @@ -250,9 +250,9 @@ static inline int ffs_nr(u32 x) * * This function returns register contents */ -static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask) +static inline u32 hw_read(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask) { - return ioread32(udc->hw_bank.regmap[reg]) & mask; + return ioread32(ci->hw_bank.regmap[reg]) & mask; } /** @@ -261,14 +261,14 @@ static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask) * @mask: bitfield mask * @data: new value */ -static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg, +static inline void hw_write(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask, u32 data) { if (~mask) - data = (ioread32(udc->hw_bank.regmap[reg]) & ~mask) + data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask) | (data & mask); - iowrite32(data, udc->hw_bank.regmap[reg]); + iowrite32(data, ci->hw_bank.regmap[reg]); } /** @@ -278,12 +278,12 @@ static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg, * * This function returns register contents */ -static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg, +static inline u32 hw_test_and_clear(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask) { - u32 val = ioread32(udc->hw_bank.regmap[reg]) & mask; + u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask; - iowrite32(val, udc->hw_bank.regmap[reg]); + iowrite32(val, ci->hw_bank.regmap[reg]); return val; } @@ -295,12 +295,12 @@ static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg, * * This function returns register contents */ -static inline u32 hw_test_and_write(struct ci13xxx *udc, enum ci13xxx_regs reg, +static inline u32 hw_test_and_write(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask, u32 data) { - u32 val = hw_read(udc, reg, ~0); + u32 val = hw_read(ci, reg, ~0); - hw_write(udc, reg, mask, data); + hw_write(ci, reg, mask, data); return (val & mask) >> ffs_nr(mask); } diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c index 12c0dd6..5a2fe5f 100644 --- a/drivers/usb/chipidea/ci13xxx_msm.c +++ b/drivers/usb/chipidea/ci13xxx_msm.c @@ -15,11 +15,11 @@ #include "ci.h" -#define MSM_USB_BASE (udc->hw_bank.abs) +#define MSM_USB_BASE (ci->hw_bank.abs) -static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event) +static void ci13xxx_msm_notify_event(struct ci13xxx *ci, unsigned event) { - struct device *dev = udc->gadget.dev.parent; + struct device *dev = ci->gadget.dev.parent; int val; switch (event) { @@ -34,13 +34,13 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event) * Put the transceiver in non-driving mode. Otherwise host * may not detect soft-disconnection. */ - val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL); + val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL); val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; - usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL); + usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL); break; default: - dev_dbg(dev, "unknown ci13xxx_udc event\n"); + dev_dbg(dev, "unknown ci13xxx event\n"); break; } } diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index c4b3e15..c6f50a2 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -68,15 +68,15 @@ void dbg_interrupt(u32 intmask) * * This function returns number of registers read */ -static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size) +static size_t hw_register_read(struct ci13xxx *ci, u32 *buf, size_t size) { unsigned i; - if (size > udc->hw_bank.size) - size = udc->hw_bank.size; + if (size > ci->hw_bank.size) + size = ci->hw_bank.size; for (i = 0; i < size; i++) - buf[i] = hw_read(udc, i * sizeof(u32), ~0); + buf[i] = hw_read(ci, i * sizeof(u32), ~0); return size; } @@ -88,18 +88,18 @@ static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size) * * This function returns an error code */ -static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data) +static int hw_register_write(struct ci13xxx *ci, u16 addr, u32 data) { /* align */ addr /= sizeof(u32); - if (addr >= udc->hw_bank.size) + if (addr >= ci->hw_bank.size) return -EINVAL; /* align */ addr *= sizeof(u32); - hw_write(udc, addr, ~0, data); + hw_write(ci, addr, ~0, data); return 0; } @@ -110,13 +110,13 @@ static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data) * * This function returns an error code */ -static int hw_intr_clear(struct ci13xxx *udc, int n) +static int hw_intr_clear(struct ci13xxx *ci, int n) { if (n >= REG_BITS) return -EINVAL; - hw_write(udc, OP_USBINTR, BIT(n), 0); - hw_write(udc, OP_USBSTS, BIT(n), BIT(n)); + hw_write(ci, OP_USBINTR, BIT(n), 0); + hw_write(ci, OP_USBSTS, BIT(n), BIT(n)); return 0; } @@ -127,15 +127,15 @@ static int hw_intr_clear(struct ci13xxx *udc, int n) * * This function returns an error code */ -static int hw_intr_force(struct ci13xxx *udc, int n) +static int hw_intr_force(struct ci13xxx *ci, int n) { if (n >= REG_BITS) return -EINVAL; - hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); - hw_write(udc, OP_USBINTR, BIT(n), BIT(n)); - hw_write(udc, OP_USBSTS, BIT(n), BIT(n)); - hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, 0); + hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); + hw_write(ci, OP_USBINTR, BIT(n), BIT(n)); + hw_write(ci, OP_USBSTS, BIT(n), BIT(n)); + hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, 0); return 0; } @@ -147,12 +147,12 @@ static int hw_intr_force(struct ci13xxx *udc, int n) static ssize_t show_device(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - struct usb_gadget *gadget = &udc->gadget; + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct usb_gadget *gadget = &ci->gadget; int n = 0; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } @@ -188,8 +188,8 @@ static DEVICE_ATTR(device, S_IRUSR, show_device, NULL); static ssize_t show_driver(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - struct usb_gadget_driver *driver = udc->driver; + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct usb_gadget_driver *driver = ci->driver; int n = 0; if (attr == NULL || buf == NULL) { @@ -412,22 +412,22 @@ static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events); static ssize_t show_inters(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; u32 intr; unsigned i, j, n = 0; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } - spin_lock_irqsave(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); /*n += scnprintf(buf + n, PAGE_SIZE - n, - "status = %08x\n", hw_read_intr_status(udc)); + "status = %08x\n", hw_read_intr_status(ci)); n += scnprintf(buf + n, PAGE_SIZE - n, - "enable = %08x\n", hw_read_intr_enable(udc));*/ + "enable = %08x\n", hw_read_intr_enable(ci));*/ n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n", isr_statistics.test); @@ -471,7 +471,7 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr, n += scnprintf(buf + n, PAGE_SIZE - n, "\n"); } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return n; } @@ -485,31 +485,31 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr, static ssize_t store_inters(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; unsigned en, bit; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "EINVAL\n"); + dev_err(ci->dev, "EINVAL\n"); goto done; } if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) { - dev_err(udc->dev, "<1|0> <bit>: enable|disable interrupt\n"); + dev_err(ci->dev, "<1|0> <bit>: enable|disable interrupt\n"); goto done; } - spin_lock_irqsave(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); if (en) { - if (hw_intr_force(udc, bit)) + if (hw_intr_force(ci, bit)) dev_err(dev, "invalid bit number\n"); else isr_statistics.test++; } else { - if (hw_intr_clear(udc, bit)) + if (hw_intr_clear(ci, bit)) dev_err(dev, "invalid bit number\n"); } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); done: return count; @@ -524,18 +524,18 @@ static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters); static ssize_t show_port_test(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; unsigned mode; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "EINVAL\n"); + dev_err(ci->dev, "EINVAL\n"); return 0; } - spin_lock_irqsave(&udc->lock, flags); - mode = hw_port_test_get(udc); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + mode = hw_port_test_get(ci); + spin_unlock_irqrestore(&ci->lock, flags); return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode); } @@ -549,24 +549,24 @@ static ssize_t store_port_test(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; unsigned mode; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); goto done; } if (sscanf(buf, "%u", &mode) != 1) { - dev_err(udc->dev, "<mode>: set port test mode"); + dev_err(ci->dev, "<mode>: set port test mode"); goto done; } - spin_lock_irqsave(&udc->lock, flags); - if (hw_port_test_set(udc, mode)) - dev_err(udc->dev, "invalid mode\n"); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + if (hw_port_test_set(ci, mode)) + dev_err(ci->dev, "invalid mode\n"); + spin_unlock_irqrestore(&ci->lock, flags); done: return count; @@ -582,20 +582,20 @@ static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR, static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; unsigned i, j, n = 0; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } - spin_lock_irqsave(&udc->lock, flags); - for (i = 0; i < udc->hw_ep_max/2; i++) { - struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i]; + spin_lock_irqsave(&ci->lock, flags); + for (i = 0; i < ci->hw_ep_max/2; i++) { + struct ci13xxx_ep *mEpRx = &ci->ci13xxx_ep[i]; struct ci13xxx_ep *mEpTx = - &udc->ci13xxx_ep[i + udc->hw_ep_max/2]; + &ci->ci13xxx_ep[i + ci->hw_ep_max/2]; n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: RX=%08X TX=%08X\n", i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); @@ -606,7 +606,7 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, *((u32 *)mEpTx->qh.ptr + j)); } } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return n; } @@ -621,25 +621,25 @@ static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL); static ssize_t show_registers(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; u32 *dump; unsigned i, k, n = 0; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL); if (!dump) { - dev_err(udc->dev, "%s: out of memory\n", __func__); + dev_err(ci->dev, "%s: out of memory\n", __func__); return 0; } - spin_lock_irqsave(&udc->lock, flags); - k = hw_register_read(udc, dump, DUMP_ENTRIES); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + k = hw_register_read(ci, dump, DUMP_ENTRIES); + spin_unlock_irqrestore(&ci->lock, flags); for (i = 0; i < k; i++) { n += scnprintf(buf + n, PAGE_SIZE - n, @@ -660,24 +660,24 @@ static ssize_t store_registers(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long addr, data, flags; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); goto done; } if (sscanf(buf, "%li %li", &addr, &data) != 2) { - dev_err(udc->dev, + dev_err(ci->dev, "<addr> <data>: write data to register address\n"); goto done; } - spin_lock_irqsave(&udc->lock, flags); - if (hw_register_write(udc, addr, data)) - dev_err(udc->dev, "invalid address range\n"); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + if (hw_register_write(ci, addr, data)) + dev_err(ci->dev, "invalid address range\n"); + spin_unlock_irqrestore(&ci->lock, flags); done: return count; @@ -693,34 +693,34 @@ static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR, static ssize_t show_requests(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; struct list_head *ptr = NULL; struct ci13xxx_req *req = NULL; unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } - spin_lock_irqsave(&udc->lock, flags); - for (i = 0; i < udc->hw_ep_max; i++) - list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue) + spin_lock_irqsave(&ci->lock, flags); + for (i = 0; i < ci->hw_ep_max; i++) + list_for_each(ptr, &ci->ci13xxx_ep[i].qh.queue) { req = list_entry(ptr, struct ci13xxx_req, queue); n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: TD=%08X %s\n", - i % udc->hw_ep_max/2, (u32)req->dma, - ((i < udc->hw_ep_max/2) ? "RX" : "TX")); + i % ci->hw_ep_max/2, (u32)req->dma, + ((i < ci->hw_ep_max/2) ? "RX" : "TX")); for (j = 0; j < qSize; j++) n += scnprintf(buf + n, PAGE_SIZE - n, " %04X: %08X\n", j, *((u32 *)req->ptr + j)); } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return n; } diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 3094c85..ba8284e 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -67,11 +67,11 @@ static inline int hw_ep_bit(int num, int dir) return num + (dir ? 16 : 0); } -static inline int ep_to_bit(struct ci13xxx *udc, int n) +static inline int ep_to_bit(struct ci13xxx *ci, int n) { - int fill = 16 - udc->hw_ep_max / 2; + int fill = 16 - ci->hw_ep_max / 2; - if (n >= udc->hw_ep_max / 2) + if (n >= ci->hw_ep_max / 2) n += fill; return n; @@ -84,17 +84,17 @@ static inline int ep_to_bit(struct ci13xxx *udc, int n) * * This function returns an error code */ -static int hw_device_state(struct ci13xxx *udc, u32 dma) +static int hw_device_state(struct ci13xxx *ci, u32 dma) { if (dma) { - hw_write(udc, OP_ENDPTLISTADDR, ~0, dma); + hw_write(ci, OP_ENDPTLISTADDR, ~0, dma); /* interrupt, error, port change, reset, sleep/suspend */ - hw_write(udc, OP_USBINTR, ~0, + hw_write(ci, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(udc, OP_USBCMD, USBCMD_RS, USBCMD_RS); + hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { - hw_write(udc, OP_USBCMD, USBCMD_RS, 0); - hw_write(udc, OP_USBINTR, ~0, 0); + hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + hw_write(ci, OP_USBINTR, ~0, 0); } return 0; } @@ -106,16 +106,16 @@ static int hw_device_state(struct ci13xxx *udc, u32 dma) * * This function returns an error code */ -static int hw_ep_flush(struct ci13xxx *udc, int num, int dir) +static int hw_ep_flush(struct ci13xxx *ci, int num, int dir) { int n = hw_ep_bit(num, dir); do { /* flush any pending transfer */ - hw_write(udc, OP_ENDPTFLUSH, BIT(n), BIT(n)); - while (hw_read(udc, OP_ENDPTFLUSH, BIT(n))) + hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n)); + while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) cpu_relax(); - } while (hw_read(udc, OP_ENDPTSTAT, BIT(n))); + } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); return 0; } @@ -127,10 +127,10 @@ static int hw_ep_flush(struct ci13xxx *udc, int num, int dir) * * This function returns an error code */ -static int hw_ep_disable(struct ci13xxx *udc, int num, int dir) +static int hw_ep_disable(struct ci13xxx *ci, int num, int dir) { - hw_ep_flush(udc, num, dir); - hw_write(udc, OP_ENDPTCTRL + num, + hw_ep_flush(ci, num, dir); + hw_write(ci, OP_ENDPTCTRL + num, dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); return 0; } @@ -143,7 +143,7 @@ static int hw_ep_disable(struct ci13xxx *udc, int num, int dir) * * This function returns an error code */ -static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type) +static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type) { u32 mask, data; @@ -166,7 +166,7 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type) mask |= ENDPTCTRL_RXE; /* enable */ data |= ENDPTCTRL_RXE; } - hw_write(udc, OP_ENDPTCTRL + num, mask, data); + hw_write(ci, OP_ENDPTCTRL + num, mask, data); return 0; } @@ -177,11 +177,11 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type) * * This function returns 1 if endpoint halted */ -static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir) +static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir) { u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - return hw_read(udc, OP_ENDPTCTRL + num, mask) ? 1 : 0; + return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0; } /** @@ -191,10 +191,10 @@ static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir) * * This function returns setup status */ -static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n) +static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n) { - n = ep_to_bit(udc, n); - return hw_test_and_clear(udc, OP_ENDPTSETUPSTAT, BIT(n)); + n = ep_to_bit(ci, n); + return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n)); } /** @@ -205,18 +205,18 @@ static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n) * * This function returns an error code */ -static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl) +static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl) { int n = hw_ep_bit(num, dir); - if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num))) + if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; - hw_write(udc, OP_ENDPTPRIME, BIT(n), BIT(n)); + hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n)); - while (hw_read(udc, OP_ENDPTPRIME, BIT(n))) + while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) cpu_relax(); - if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num))) + if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; /* status shoult be tested according with manual but it doesn't work */ @@ -232,7 +232,7 @@ static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl) * * This function returns an error code */ -static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value) +static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value) { if (value != 0 && value != 1) return -EINVAL; @@ -243,9 +243,9 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value) u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; /* data toggle - reserved for EP0 but it's in ESS */ - hw_write(udc, reg, mask_xs|mask_xr, + hw_write(ci, reg, mask_xs|mask_xr, value ? mask_xs : mask_xr); - } while (value != hw_ep_get_halt(udc, num, dir)); + } while (value != hw_ep_get_halt(ci, num, dir)); return 0; } @@ -255,10 +255,10 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value) * * This function returns true if high speed port */ -static int hw_port_is_high_speed(struct ci13xxx *udc) +static int hw_port_is_high_speed(struct ci13xxx *ci) { - return udc->hw_bank.lpm ? hw_read(udc, OP_DEVLC, DEVLC_PSPD) : - hw_read(udc, OP_PORTSC, PORTSC_HSP); + return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) : + hw_read(ci, OP_PORTSC, PORTSC_HSP); } /** @@ -266,9 +266,9 @@ static int hw_port_is_high_speed(struct ci13xxx *udc) * * This function returns register data */ -static u32 hw_read_intr_enable(struct ci13xxx *udc) +static u32 hw_read_intr_enable(struct ci13xxx *ci) { - return hw_read(udc, OP_USBINTR, ~0); + return hw_read(ci, OP_USBINTR, ~0); } /** @@ -276,9 +276,9 @@ static u32 hw_read_intr_enable(struct ci13xxx *udc) * * This function returns register data */ -static u32 hw_read_intr_status(struct ci13xxx *udc) +static u32 hw_read_intr_status(struct ci13xxx *ci) { - return hw_read(udc, OP_USBSTS, ~0); + return hw_read(ci, OP_USBSTS, ~0); } /** @@ -288,10 +288,10 @@ static u32 hw_read_intr_status(struct ci13xxx *udc) * * This function returns complete status */ -static int hw_test_and_clear_complete(struct ci13xxx *udc, int n) +static int hw_test_and_clear_complete(struct ci13xxx *ci, int n) { - n = ep_to_bit(udc, n); - return hw_test_and_clear(udc, OP_ENDPTCOMPLETE, BIT(n)); + n = ep_to_bit(ci, n); + return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n)); } /** @@ -300,11 +300,11 @@ static int hw_test_and_clear_complete(struct ci13xxx *udc, int n) * * This function returns active interrutps */ -static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc) +static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci) { - u32 reg = hw_read_intr_status(udc) & hw_read_intr_enable(udc); + u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci); - hw_write(udc, OP_USBSTS, ~0, reg); + hw_write(ci, OP_USBSTS, ~0, reg); return reg; } @@ -314,9 +314,9 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc) * * This function returns guard value */ -static int hw_test_and_clear_setup_guard(struct ci13xxx *udc) +static int hw_test_and_clear_setup_guard(struct ci13xxx *ci) { - return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, 0); + return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0); } /** @@ -325,9 +325,9 @@ static int hw_test_and_clear_setup_guard(struct ci13xxx *udc) * * This function returns guard value */ -static int hw_test_and_set_setup_guard(struct ci13xxx *udc) +static int hw_test_and_set_setup_guard(struct ci13xxx *ci) { - return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); + return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); } /** @@ -337,9 +337,9 @@ static int hw_test_and_set_setup_guard(struct ci13xxx *udc) * This function explicitly sets the address, without the "USBADRA" (advance) * feature, which is not supported by older versions of the controller. */ -static void hw_usb_set_address(struct ci13xxx *udc, u8 value) +static void hw_usb_set_address(struct ci13xxx *ci, u8 value) { - hw_write(udc, OP_DEVICEADDR, DEVICEADDR_USBADR, + hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR, value << ffs_nr(DEVICEADDR_USBADR)); } @@ -349,21 +349,21 @@ static void hw_usb_set_address(struct ci13xxx *udc, u8 value) * * This function returns an error code */ -static int hw_usb_reset(struct ci13xxx *udc) +static int hw_usb_reset(struct ci13xxx *ci) { - hw_usb_set_address(udc, 0); + hw_usb_set_address(ci, 0); /* ESS flushes only at end?!? */ - hw_write(udc, OP_ENDPTFLUSH, ~0, ~0); + hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); /* clear setup token semaphores */ - hw_write(udc, OP_ENDPTSETUPSTAT, 0, 0); + hw_write(ci, OP_ENDPTSETUPSTAT, 0, 0); /* clear complete status */ - hw_write(udc, OP_ENDPTCOMPLETE, 0, 0); + hw_write(ci, OP_ENDPTCOMPLETE, 0, 0); /* wait until all bits cleared */ - while (hw_read(udc, OP_ENDPTPRIME, ~0)) + while (hw_read(ci, OP_ENDPTPRIME, ~0)) udelay(10); /* not RTOS friendly */ /* reset all endpoints ? */ @@ -395,7 +395,7 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep) */ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) { - struct ci13xxx *udc = mEp->udc; + struct ci13xxx *ci = mEp->ci; unsigned i; int ret = 0; unsigned length = mReq->req.length; @@ -418,7 +418,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) if (!mReq->req.no_interrupt) mReq->zptr->token |= TD_IOC; } - ret = usb_gadget_map_request(&udc->gadget, &mReq->req, mEp->dir); + ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir); if (ret) return ret; @@ -454,13 +454,13 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) else mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; wmb(); - if (hw_read(udc, OP_ENDPTPRIME, BIT(n))) + if (hw_read(ci, OP_ENDPTPRIME, BIT(n))) goto done; do { - hw_write(udc, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); - tmp_stat = hw_read(udc, OP_ENDPTSTAT, BIT(n)); - } while (!hw_read(udc, OP_USBCMD, USBCMD_ATDTW)); - hw_write(udc, OP_USBCMD, USBCMD_ATDTW, 0); + hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); + tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n)); + } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW)); + hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0); if (tmp_stat) goto done; } @@ -472,7 +472,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) wmb(); /* synchronize before ep prime */ - ret = hw_ep_prime(udc, mEp->num, mEp->dir, + ret = hw_ep_prime(ci, mEp->num, mEp->dir, mEp->type == USB_ENDPOINT_XFER_CONTROL); done: return ret; @@ -502,7 +502,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) mReq->req.status = 0; - usb_gadget_unmap_request(&mEp->udc->gadget, &mReq->req, mEp->dir); + usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir); mReq->req.status = mReq->ptr->token & TD_STATUS; if ((TD_STATUS_HALTED & mReq->req.status) != 0) @@ -534,7 +534,7 @@ __acquires(mEp->lock) if (mEp == NULL) return -EINVAL; - hw_ep_flush(mEp->udc, mEp->num, mEp->dir); + hw_ep_flush(mEp->ci, mEp->num, mEp->dir); while (!list_empty(&mEp->qh.queue)) { @@ -563,33 +563,33 @@ __acquires(mEp->lock) static int _gadget_stop_activity(struct usb_gadget *gadget) { struct usb_ep *ep; - struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget); unsigned long flags; - spin_lock_irqsave(&udc->lock, flags); - udc->gadget.speed = USB_SPEED_UNKNOWN; - udc->remote_wakeup = 0; - udc->suspended = 0; - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + ci->gadget.speed = USB_SPEED_UNKNOWN; + ci->remote_wakeup = 0; + ci->suspended = 0; + spin_unlock_irqrestore(&ci->lock, flags); /* flush all endpoints */ gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); } - usb_ep_fifo_flush(&udc->ep0out->ep); - usb_ep_fifo_flush(&udc->ep0in->ep); + usb_ep_fifo_flush(&ci->ep0out->ep); + usb_ep_fifo_flush(&ci->ep0in->ep); - if (udc->driver) - udc->driver->disconnect(gadget); + if (ci->driver) + ci->driver->disconnect(gadget); /* make sure to disable all endpoints */ gadget_for_each_ep(ep, gadget) { usb_ep_disable(ep); } - if (udc->status != NULL) { - usb_ep_free_request(&udc->ep0in->ep, udc->status); - udc->status = NULL; + if (ci->status != NULL) { + usb_ep_free_request(&ci->ep0in->ep, ci->status); + ci->status = NULL; } return 0; @@ -600,36 +600,36 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) *****************************************************************************/ /** * isr_reset_handler: USB reset interrupt handler - * @udc: UDC device + * @ci: UDC device * * This function resets USB engine after a bus reset occurred */ -static void isr_reset_handler(struct ci13xxx *udc) -__releases(udc->lock) -__acquires(udc->lock) +static void isr_reset_handler(struct ci13xxx *ci) +__releases(ci->lock) +__acquires(ci->lock) { int retval; dbg_event(0xFF, "BUS RST", 0); - spin_unlock(&udc->lock); - retval = _gadget_stop_activity(&udc->gadget); + spin_unlock(&ci->lock); + retval = _gadget_stop_activity(&ci->gadget); if (retval) goto done; - retval = hw_usb_reset(udc); + retval = hw_usb_reset(ci); if (retval) goto done; - udc->status = usb_ep_alloc_request(&udc->ep0in->ep, GFP_ATOMIC); - if (udc->status == NULL) + ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC); + if (ci->status == NULL) retval = -ENOMEM; done: - spin_lock(&udc->lock); + spin_lock(&ci->lock); if (retval) - dev_err(udc->dev, "error: %i\n", retval); + dev_err(ci->dev, "error: %i\n", retval); } /** @@ -650,17 +650,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) /** * isr_get_status_response: get_status request response - * @udc: udc struct + * @ci: ci struct * @setup: setup request packet * * This function returns an error code */ -static int isr_get_status_response(struct ci13xxx *udc, +static int isr_get_status_response(struct ci13xxx *ci, struct usb_ctrlrequest *setup) __releases(mEp->lock) __acquires(mEp->lock) { - struct ci13xxx_ep *mEp = udc->ep0in; + struct ci13xxx_ep *mEp = ci->ep0in; struct usb_request *req = NULL; gfp_t gfp_flags = GFP_ATOMIC; int dir, num, retval; @@ -684,14 +684,14 @@ __acquires(mEp->lock) if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { /* Assume that device is bus powered for now. */ - *(u16 *)req->buf = udc->remote_wakeup << 1; + *(u16 *)req->buf = ci->remote_wakeup << 1; retval = 0; } else if ((setup->bRequestType & USB_RECIP_MASK) \ == USB_RECIP_ENDPOINT) { dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? TX : RX; num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; - *(u16 *)req->buf = hw_ep_get_halt(udc, num, dir); + *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir); } /* else do nothing; reserved for future use */ @@ -723,39 +723,39 @@ __acquires(mEp->lock) static void isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) { - struct ci13xxx *udc = req->context; + struct ci13xxx *ci = req->context; unsigned long flags; - if (udc->setaddr) { - hw_usb_set_address(udc, udc->address); - udc->setaddr = false; + if (ci->setaddr) { + hw_usb_set_address(ci, ci->address); + ci->setaddr = false; } - spin_lock_irqsave(&udc->lock, flags); - if (udc->test_mode) - hw_port_test_set(udc, udc->test_mode); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + if (ci->test_mode) + hw_port_test_set(ci, ci->test_mode); + spin_unlock_irqrestore(&ci->lock, flags); } /** * isr_setup_status_phase: queues the status phase of a setup transation - * @udc: udc struct + * @ci: ci struct * * This function returns an error code */ -static int isr_setup_status_phase(struct ci13xxx *udc) +static int isr_setup_status_phase(struct ci13xxx *ci) __releases(mEp->lock) __acquires(mEp->lock) { int retval; struct ci13xxx_ep *mEp; - mEp = (udc->ep0_dir == TX) ? udc->ep0out : udc->ep0in; - udc->status->context = udc; - udc->status->complete = isr_setup_status_complete; + mEp = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; + ci->status->context = ci; + ci->status->complete = isr_setup_status_complete; spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC); + retval = usb_ep_queue(&mEp->ep, ci->status, GFP_ATOMIC); spin_lock(mEp->lock); return retval; @@ -790,7 +790,7 @@ __acquires(mEp->lock) spin_unlock(mEp->lock); if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) && mReq->req.length) - mEpTemp = mEp->udc->ep0in; + mEpTemp = mEp->ci->ep0in; mReq->req.complete(&mEpTemp->ep, &mReq->req); spin_lock(mEp->lock); } @@ -806,48 +806,48 @@ __acquires(mEp->lock) /** * isr_tr_complete_handler: transaction complete interrupt handler - * @udc: UDC descriptor + * @ci: UDC descriptor * * This function handles traffic events */ -static void isr_tr_complete_handler(struct ci13xxx *udc) -__releases(udc->lock) -__acquires(udc->lock) +static void isr_tr_complete_handler(struct ci13xxx *ci) +__releases(ci->lock) +__acquires(ci->lock) { unsigned i; u8 tmode = 0; - for (i = 0; i < udc->hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < ci->hw_ep_max; i++) { + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; int type, num, dir, err = -EINVAL; struct usb_ctrlrequest req; if (mEp->ep.desc == NULL) continue; /* not configured */ - if (hw_test_and_clear_complete(udc, i)) { + if (hw_test_and_clear_complete(ci, i)) { err = isr_tr_complete_low(mEp); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (err > 0) /* needs status phase */ - err = isr_setup_status_phase(udc); + err = isr_setup_status_phase(ci); if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); - spin_unlock(&udc->lock); + spin_unlock(&ci->lock); if (usb_ep_set_halt(&mEp->ep)) - dev_err(udc->dev, + dev_err(ci->dev, "error: ep_set_halt\n"); - spin_lock(&udc->lock); + spin_lock(&ci->lock); } } } if (mEp->type != USB_ENDPOINT_XFER_CONTROL || - !hw_test_and_clear_setup_status(udc, i)) + !hw_test_and_clear_setup_status(ci, i)) continue; if (i != 0) { - dev_warn(udc->dev, "ctrl traffic at endpoint %d\n", i); + dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i); continue; } @@ -855,18 +855,18 @@ __acquires(udc->lock) * Flush data and handshake transactions of previous * setup packet. */ - _ep_nuke(udc->ep0out); - _ep_nuke(udc->ep0in); + _ep_nuke(ci->ep0out); + _ep_nuke(ci->ep0in); /* read_setup_packet */ do { - hw_test_and_set_setup_guard(udc); + hw_test_and_set_setup_guard(ci); memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); - } while (!hw_test_and_clear_setup_guard(udc)); + } while (!hw_test_and_clear_setup_guard(ci)); type = req.bRequestType; - udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX; + ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; dbg_setup(_usb_addr(mEp), &req); @@ -881,23 +881,23 @@ __acquires(udc->lock) dir = num & USB_ENDPOINT_DIR_MASK; num &= USB_ENDPOINT_NUMBER_MASK; if (dir) /* TX */ - num += udc->hw_ep_max/2; - if (!udc->ci13xxx_ep[num].wedge) { - spin_unlock(&udc->lock); + num += ci->hw_ep_max/2; + if (!ci->ci13xxx_ep[num].wedge) { + spin_unlock(&ci->lock); err = usb_ep_clear_halt( - &udc->ci13xxx_ep[num].ep); - spin_lock(&udc->lock); + &ci->ci13xxx_ep[num].ep); + spin_lock(&ci->lock); if (err) break; } - err = isr_setup_status_phase(udc); + err = isr_setup_status_phase(ci); } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && le16_to_cpu(req.wValue) == USB_DEVICE_REMOTE_WAKEUP) { if (req.wLength != 0) break; - udc->remote_wakeup = 0; - err = isr_setup_status_phase(udc); + ci->remote_wakeup = 0; + err = isr_setup_status_phase(ci); } else { goto delegate; } @@ -910,7 +910,7 @@ __acquires(udc->lock) if (le16_to_cpu(req.wLength) != 2 || le16_to_cpu(req.wValue) != 0) break; - err = isr_get_status_response(udc, &req); + err = isr_get_status_response(ci, &req); break; case USB_REQ_SET_ADDRESS: if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) @@ -918,9 +918,9 @@ __acquires(udc->lock) if (le16_to_cpu(req.wLength) != 0 || le16_to_cpu(req.wIndex) != 0) break; - udc->address = (u8)le16_to_cpu(req.wValue); - udc->setaddr = true; - err = isr_setup_status_phase(udc); + ci->address = (u8)le16_to_cpu(req.wValue); + ci->setaddr = true; + err = isr_setup_status_phase(ci); break; case USB_REQ_SET_FEATURE: if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && @@ -932,20 +932,20 @@ __acquires(udc->lock) dir = num & USB_ENDPOINT_DIR_MASK; num &= USB_ENDPOINT_NUMBER_MASK; if (dir) /* TX */ - num += udc->hw_ep_max/2; + num += ci->hw_ep_max/2; - spin_unlock(&udc->lock); - err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep); - spin_lock(&udc->lock); + spin_unlock(&ci->lock); + err = usb_ep_set_halt(&ci->ci13xxx_ep[num].ep); + spin_lock(&ci->lock); if (!err) - isr_setup_status_phase(udc); + isr_setup_status_phase(ci); } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { if (req.wLength != 0) break; switch (le16_to_cpu(req.wValue)) { case USB_DEVICE_REMOTE_WAKEUP: - udc->remote_wakeup = 1; - err = isr_setup_status_phase(udc); + ci->remote_wakeup = 1; + err = isr_setup_status_phase(ci); break; case USB_DEVICE_TEST_MODE: tmode = le16_to_cpu(req.wIndex) >> 8; @@ -955,9 +955,9 @@ __acquires(udc->lock) case TEST_SE0_NAK: case TEST_PACKET: case TEST_FORCE_EN: - udc->test_mode = tmode; + ci->test_mode = tmode; err = isr_setup_status_phase( - udc); + ci); break; default: break; @@ -972,21 +972,21 @@ __acquires(udc->lock) default: delegate: if (req.wLength == 0) /* no data phase */ - udc->ep0_dir = TX; + ci->ep0_dir = TX; - spin_unlock(&udc->lock); - err = udc->driver->setup(&udc->gadget, &req); - spin_lock(&udc->lock); + spin_unlock(&ci->lock); + err = ci->driver->setup(&ci->gadget, &req); + spin_lock(&ci->lock); break; } if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); - spin_unlock(&udc->lock); + spin_unlock(&ci->lock); if (usb_ep_set_halt(&mEp->ep)) - dev_err(udc->dev, "error: ep_set_halt\n"); - spin_lock(&udc->lock); + dev_err(ci->dev, "error: ep_set_halt\n"); + spin_lock(&ci->lock); } } } @@ -1016,7 +1016,7 @@ static int ep_enable(struct usb_ep *ep, mEp->ep.desc = desc; if (!list_empty(&mEp->qh.queue)) - dev_warn(mEp->udc->dev, "enabling a non-empty endpoint!\n"); + dev_warn(mEp->ci->dev, "enabling a non-empty endpoint!\n"); mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; mEp->num = usb_endpoint_num(desc); @@ -1044,7 +1044,7 @@ static int ep_enable(struct usb_ep *ep, * is always enabled */ if (mEp->num) - retval |= hw_ep_enable(mEp->udc, mEp->num, mEp->dir, mEp->type); + retval |= hw_ep_enable(mEp->ci, mEp->num, mEp->dir, mEp->type); spin_unlock_irqrestore(mEp->lock, flags); return retval; @@ -1075,7 +1075,7 @@ static int ep_disable(struct usb_ep *ep) dbg_event(_usb_addr(mEp), "DISABLE", 0); retval |= _ep_nuke(mEp); - retval |= hw_ep_disable(mEp->udc, mEp->num, mEp->dir); + retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) mEp->dir = (mEp->dir == TX) ? RX : TX; @@ -1132,7 +1132,7 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req) if (ep == NULL || req == NULL) { return; } else if (!list_empty(&mReq->queue)) { - dev_err(mEp->udc->dev, "freeing queued request\n"); + dev_err(mEp->ci->dev, "freeing queued request\n"); return; } @@ -1157,7 +1157,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, { struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); - struct ci13xxx *udc = mEp->udc; + struct ci13xxx *ci = mEp->ci; int retval = 0; unsigned long flags; @@ -1168,12 +1168,12 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (req->length) - mEp = (udc->ep0_dir == RX) ? - udc->ep0out : udc->ep0in; + mEp = (ci->ep0_dir == RX) ? + ci->ep0out : ci->ep0in; if (!list_empty(&mEp->qh.queue)) { _ep_nuke(mEp); retval = -EOVERFLOW; - dev_warn(mEp->udc->dev, "endpoint ctrl %X nuked\n", + dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n", _usb_addr(mEp)); } } @@ -1181,14 +1181,14 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, /* first nuke then test link, e.g. previous status has not sent */ if (!list_empty(&mReq->queue)) { retval = -EBUSY; - dev_err(mEp->udc->dev, "request already in queue\n"); + dev_err(mEp->ci->dev, "request already in queue\n"); goto done; } if (req->length > 4 * CI13XXX_PAGE_SIZE) { req->length = 4 * CI13XXX_PAGE_SIZE; retval = -EMSGSIZE; - dev_warn(mEp->udc->dev, "request length truncated\n"); + dev_warn(mEp->ci->dev, "request length truncated\n"); } dbg_queue(_usb_addr(mEp), req, retval); @@ -1231,12 +1231,12 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) dbg_event(_usb_addr(mEp), "DEQUEUE", 0); - hw_ep_flush(mEp->udc, mEp->num, mEp->dir); + hw_ep_flush(mEp->ci, mEp->num, mEp->dir); /* pop request */ list_del_init(&mReq->queue); - usb_gadget_unmap_request(&mEp->udc->gadget, req, mEp->dir); + usb_gadget_unmap_request(&mEp->ci->gadget, req, mEp->dir); req->status = -ECONNRESET; @@ -1278,7 +1278,7 @@ static int ep_set_halt(struct usb_ep *ep, int value) direction = mEp->dir; do { dbg_event(_usb_addr(mEp), "HALT", value); - retval |= hw_ep_set_halt(mEp->udc, mEp->num, mEp->dir, value); + retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value); if (!value) mEp->wedge = 0; @@ -1326,14 +1326,14 @@ static void ep_fifo_flush(struct usb_ep *ep) unsigned long flags; if (ep == NULL) { - dev_err(mEp->udc->dev, "%02X: -EINVAL\n", _usb_addr(mEp)); + dev_err(mEp->ci->dev, "%02X: -EINVAL\n", _usb_addr(mEp)); return; } spin_lock_irqsave(mEp->lock, flags); dbg_event(_usb_addr(mEp), "FFLUSH", 0); - hw_ep_flush(mEp->udc, mEp->num, mEp->dir); + hw_ep_flush(mEp->ci, mEp->num, mEp->dir); spin_unlock_irqrestore(mEp->lock, flags); } @@ -1359,30 +1359,30 @@ static const struct usb_ep_ops usb_ep_ops = { *****************************************************************************/ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) { - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); unsigned long flags; int gadget_ready = 0; - if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS)) + if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS)) return -EOPNOTSUPP; - spin_lock_irqsave(&udc->lock, flags); - udc->vbus_active = is_active; - if (udc->driver) + spin_lock_irqsave(&ci->lock, flags); + ci->vbus_active = is_active; + if (ci->driver) gadget_ready = 1; - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); if (gadget_ready) { if (is_active) { pm_runtime_get_sync(&_gadget->dev); - hw_device_reset(udc, USBMODE_CM_DC); - hw_device_state(udc, udc->ep0out->qh.dma); + hw_device_reset(ci, USBMODE_CM_DC); + hw_device_state(ci, ci->ep0out->qh.dma); } else { - hw_device_state(udc, 0); - if (udc->platdata->notify_event) - udc->platdata->notify_event(udc, + hw_device_state(ci, 0); + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, CI13XXX_CONTROLLER_STOPPED_EVENT); - _gadget_stop_activity(&udc->gadget); + _gadget_stop_activity(&ci->gadget); pm_runtime_put_sync(&_gadget->dev); } } @@ -1392,31 +1392,31 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) static int ci13xxx_wakeup(struct usb_gadget *_gadget) { - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); unsigned long flags; int ret = 0; - spin_lock_irqsave(&udc->lock, flags); - if (!udc->remote_wakeup) { + spin_lock_irqsave(&ci->lock, flags); + if (!ci->remote_wakeup) { ret = -EOPNOTSUPP; goto out; } - if (!hw_read(udc, OP_PORTSC, PORTSC_SUSP)) { + if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; goto out; } - hw_write(udc, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); + hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); out: - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return ret; } static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) { - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); - if (udc->transceiver) - return usb_phy_set_power(udc->transceiver, mA); + if (ci->transceiver) + return usb_phy_set_power(ci->transceiver, mA); return -ENOTSUPP; } @@ -1437,28 +1437,28 @@ static const struct usb_gadget_ops usb_gadget_ops = { .udc_stop = ci13xxx_stop, }; -static int init_eps(struct ci13xxx *udc) +static int init_eps(struct ci13xxx *ci) { int retval = 0, i, j; - for (i = 0; i < udc->hw_ep_max/2; i++) + for (i = 0; i < ci->hw_ep_max/2; i++) for (j = RX; j <= TX; j++) { - int k = i + j * udc->hw_ep_max/2; - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; + int k = i + j * ci->hw_ep_max/2; + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[k]; scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, (j == TX) ? "in" : "out"); - mEp->udc = udc; - mEp->lock = &udc->lock; - mEp->td_pool = udc->td_pool; + mEp->ci = ci; + mEp->lock = &ci->lock; + mEp->td_pool = ci->td_pool; mEp->ep.name = mEp->name; mEp->ep.ops = &usb_ep_ops; mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; INIT_LIST_HEAD(&mEp->qh.queue); - mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, + mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, &mEp->qh.dma); if (mEp->qh.ptr == NULL) retval = -ENOMEM; @@ -1471,14 +1471,14 @@ static int init_eps(struct ci13xxx *udc) */ if (i == 0) { if (j == RX) - udc->ep0out = mEp; + ci->ep0out = mEp; else - udc->ep0in = mEp; + ci->ep0in = mEp; continue; } - list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); + list_add_tail(&mEp->ep.ep_list, &ci->gadget.ep_list); } return retval; @@ -1494,7 +1494,7 @@ static int init_eps(struct ci13xxx *udc) static int ci13xxx_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { - struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget); unsigned long flags; int retval = -ENOMEM; @@ -1502,35 +1502,35 @@ static int ci13xxx_start(struct usb_gadget *gadget, return -EINVAL; - udc->ep0out->ep.desc = &ctrl_endpt_out_desc; - retval = usb_ep_enable(&udc->ep0out->ep); + ci->ep0out->ep.desc = &ctrl_endpt_out_desc; + retval = usb_ep_enable(&ci->ep0out->ep); if (retval) return retval; - udc->ep0in->ep.desc = &ctrl_endpt_in_desc; - retval = usb_ep_enable(&udc->ep0in->ep); + ci->ep0in->ep.desc = &ctrl_endpt_in_desc; + retval = usb_ep_enable(&ci->ep0in->ep); if (retval) return retval; - spin_lock_irqsave(&udc->lock, flags); - - udc->driver = driver; - pm_runtime_get_sync(&udc->gadget.dev); - if (udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) { - if (udc->vbus_active) { - if (udc->platdata->flags & CI13XXX_REGS_SHARED) - hw_device_reset(udc, USBMODE_CM_DC); + spin_lock_irqsave(&ci->lock, flags); + + ci->driver = driver; + pm_runtime_get_sync(&ci->gadget.dev); + if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) { + if (ci->vbus_active) { + if (ci->platdata->flags & CI13XXX_REGS_SHARED) + hw_device_reset(ci, USBMODE_CM_DC); } else { - pm_runtime_put_sync(&udc->gadget.dev); + pm_runtime_put_sync(&ci->gadget.dev); goto done; } } - retval = hw_device_state(udc, udc->ep0out->qh.dma); + retval = hw_device_state(ci, ci->ep0out->qh.dma); if (retval) - pm_runtime_put_sync(&udc->gadget.dev); + pm_runtime_put_sync(&ci->gadget.dev); done: - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return retval; } @@ -1540,25 +1540,25 @@ static int ci13xxx_start(struct usb_gadget *gadget, static int ci13xxx_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { - struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget); unsigned long flags; - spin_lock_irqsave(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); - if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) || - udc->vbus_active) { - hw_device_state(udc, 0); - if (udc->platdata->notify_event) - udc->platdata->notify_event(udc, + if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) || + ci->vbus_active) { + hw_device_state(ci, 0); + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, CI13XXX_CONTROLLER_STOPPED_EVENT); - udc->driver = NULL; - spin_unlock_irqrestore(&udc->lock, flags); - _gadget_stop_activity(&udc->gadget); - spin_lock_irqsave(&udc->lock, flags); - pm_runtime_put(&udc->gadget.dev); + ci->driver = NULL; + spin_unlock_irqrestore(&ci->lock, flags); + _gadget_stop_activity(&ci->gadget); + spin_lock_irqsave(&ci->lock, flags); + pm_runtime_put(&ci->gadget.dev); } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return 0; } @@ -1567,64 +1567,64 @@ static int ci13xxx_stop(struct usb_gadget *gadget, * BUS block *****************************************************************************/ /** - * udc_irq: udc interrupt handler + * udc_irq: ci interrupt handler * * This function returns IRQ_HANDLED if the IRQ has been handled * It locks access to registers */ -static irqreturn_t udc_irq(struct ci13xxx *udc) +static irqreturn_t udc_irq(struct ci13xxx *ci) { irqreturn_t retval; u32 intr; - if (udc == NULL) + if (ci == NULL) return IRQ_HANDLED; - spin_lock(&udc->lock); + spin_lock(&ci->lock); - if (udc->platdata->flags & CI13XXX_REGS_SHARED) { - if (hw_read(udc, OP_USBMODE, USBMODE_CM) != + if (ci->platdata->flags & CI13XXX_REGS_SHARED) { + if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) { - spin_unlock(&udc->lock); + spin_unlock(&ci->lock); return IRQ_NONE; } } - intr = hw_test_and_clear_intr_active(udc); + intr = hw_test_and_clear_intr_active(ci); dbg_interrupt(intr); if (intr) { /* order defines priority - do NOT change it */ if (USBi_URI & intr) - isr_reset_handler(udc); + isr_reset_handler(ci); if (USBi_PCI & intr) { - udc->gadget.speed = hw_port_is_high_speed(udc) ? + ci->gadget.speed = hw_port_is_high_speed(ci) ? USB_SPEED_HIGH : USB_SPEED_FULL; - if (udc->suspended && udc->driver->resume) { - spin_unlock(&udc->lock); - udc->driver->resume(&udc->gadget); - spin_lock(&udc->lock); - udc->suspended = 0; + if (ci->suspended && ci->driver->resume) { + spin_unlock(&ci->lock); + ci->driver->resume(&ci->gadget); + spin_lock(&ci->lock); + ci->suspended = 0; } } if (USBi_UI & intr) - isr_tr_complete_handler(udc); + isr_tr_complete_handler(ci); if (USBi_SLI & intr) { - if (udc->gadget.speed != USB_SPEED_UNKNOWN && - udc->driver->suspend) { - udc->suspended = 1; - spin_unlock(&udc->lock); - udc->driver->suspend(&udc->gadget); - spin_lock(&udc->lock); + if (ci->gadget.speed != USB_SPEED_UNKNOWN && + ci->driver->suspend) { + ci->suspended = 1; + spin_unlock(&ci->lock); + ci->driver->suspend(&ci->gadget); + spin_lock(&ci->lock); } } retval = IRQ_HANDLED; } else { retval = IRQ_NONE; } - spin_unlock(&udc->lock); + spin_unlock(&ci->lock); return retval; } @@ -1641,109 +1641,109 @@ static void udc_release(struct device *dev) /** * udc_start: initialize gadget role - * @udc: chipidea controller + * @ci: chipidea controller */ -static int udc_start(struct ci13xxx *udc) +static int udc_start(struct ci13xxx *ci) { - struct device *dev = udc->dev; + struct device *dev = ci->dev; int retval = 0; - spin_lock_init(&udc->lock); + spin_lock_init(&ci->lock); - udc->gadget.ops = &usb_gadget_ops; - udc->gadget.speed = USB_SPEED_UNKNOWN; - udc->gadget.max_speed = USB_SPEED_HIGH; - udc->gadget.is_otg = 0; - udc->gadget.name = udc->platdata->name; + ci->gadget.ops = &usb_gadget_ops; + ci->gadget.speed = USB_SPEED_UNKNOWN; + ci->gadget.max_speed = USB_SPEED_HIGH; + ci->gadget.is_otg = 0; + ci->gadget.name = ci->platdata->name; - INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&ci->gadget.ep_list); - dev_set_name(&udc->gadget.dev, "gadget"); - udc->gadget.dev.dma_mask = dev->dma_mask; - udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask; - udc->gadget.dev.parent = dev; - udc->gadget.dev.release = udc_release; + dev_set_name(&ci->gadget.dev, "gadget"); + ci->gadget.dev.dma_mask = dev->dma_mask; + ci->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask; + ci->gadget.dev.parent = dev; + ci->gadget.dev.release = udc_release; /* alloc resources */ - udc->qh_pool = dma_pool_create("ci13xxx_qh", dev, + ci->qh_pool = dma_pool_create("ci13xxx_qh", dev, sizeof(struct ci13xxx_qh), 64, CI13XXX_PAGE_SIZE); - if (udc->qh_pool == NULL) + if (ci->qh_pool == NULL) return -ENOMEM; - udc->td_pool = dma_pool_create("ci13xxx_td", dev, + ci->td_pool = dma_pool_create("ci13xxx_td", dev, sizeof(struct ci13xxx_td), 64, CI13XXX_PAGE_SIZE); - if (udc->td_pool == NULL) { + if (ci->td_pool == NULL) { retval = -ENOMEM; goto free_qh_pool; } - retval = init_eps(udc); + retval = init_eps(ci); if (retval) goto free_pools; - udc->gadget.ep0 = &udc->ep0in->ep; + ci->gadget.ep0 = &ci->ep0in->ep; - udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); - if (udc->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { - if (udc->transceiver == NULL) { + if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { + if (ci->transceiver == NULL) { retval = -ENODEV; goto free_pools; } } - if (!(udc->platdata->flags & CI13XXX_REGS_SHARED)) { - retval = hw_device_reset(udc, USBMODE_CM_DC); + if (!(ci->platdata->flags & CI13XXX_REGS_SHARED)) { + retval = hw_device_reset(ci, USBMODE_CM_DC); if (retval) goto put_transceiver; } - retval = device_register(&udc->gadget.dev); + retval = device_register(&ci->gadget.dev); if (retval) { - put_device(&udc->gadget.dev); + put_device(&ci->gadget.dev); goto put_transceiver; } - retval = dbg_create_files(&udc->gadget.dev); + retval = dbg_create_files(&ci->gadget.dev); if (retval) goto unreg_device; - if (!IS_ERR_OR_NULL(udc->transceiver)) { - retval = otg_set_peripheral(udc->transceiver->otg, - &udc->gadget); + if (!IS_ERR_OR_NULL(ci->transceiver)) { + retval = otg_set_peripheral(ci->transceiver->otg, + &ci->gadget); if (retval) goto remove_dbg; } - retval = usb_add_gadget_udc(dev, &udc->gadget); + retval = usb_add_gadget_udc(dev, &ci->gadget); if (retval) goto remove_trans; - pm_runtime_no_callbacks(&udc->gadget.dev); - pm_runtime_enable(&udc->gadget.dev); + pm_runtime_no_callbacks(&ci->gadget.dev); + pm_runtime_enable(&ci->gadget.dev); return retval; remove_trans: - if (!IS_ERR_OR_NULL(udc->transceiver)) { - otg_set_peripheral(udc->transceiver->otg, &udc->gadget); - usb_put_phy(udc->transceiver); + if (!IS_ERR_OR_NULL(ci->transceiver)) { + otg_set_peripheral(ci->transceiver->otg, &ci->gadget); + usb_put_phy(ci->transceiver); } dev_err(dev, "error = %i\n", retval); remove_dbg: - dbg_remove_files(&udc->gadget.dev); + dbg_remove_files(&ci->gadget.dev); unreg_device: - device_unregister(&udc->gadget.dev); + device_unregister(&ci->gadget.dev); put_transceiver: - if (!IS_ERR_OR_NULL(udc->transceiver)) - usb_put_phy(udc->transceiver); + if (!IS_ERR_OR_NULL(ci->transceiver)) + usb_put_phy(ci->transceiver); free_pools: - dma_pool_destroy(udc->td_pool); + dma_pool_destroy(ci->td_pool); free_qh_pool: - dma_pool_destroy(udc->qh_pool); + dma_pool_destroy(ci->qh_pool); return retval; } @@ -1752,32 +1752,32 @@ free_qh_pool: * * No interrupts active, the IRQ has been released */ -static void udc_stop(struct ci13xxx *udc) +static void udc_stop(struct ci13xxx *ci) { int i; - if (udc == NULL) + if (ci == NULL) return; - usb_del_gadget_udc(&udc->gadget); + usb_del_gadget_udc(&ci->gadget); - for (i = 0; i < udc->hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < ci->hw_ep_max; i++) { + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; - dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); + dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); } - dma_pool_destroy(udc->td_pool); - dma_pool_destroy(udc->qh_pool); + dma_pool_destroy(ci->td_pool); + dma_pool_destroy(ci->qh_pool); - if (!IS_ERR_OR_NULL(udc->transceiver)) { - otg_set_peripheral(udc->transceiver->otg, NULL); - usb_put_phy(udc->transceiver); + if (!IS_ERR_OR_NULL(ci->transceiver)) { + otg_set_peripheral(ci->transceiver->otg, NULL); + usb_put_phy(ci->transceiver); } - dbg_remove_files(&udc->gadget.dev); - device_unregister(&udc->gadget.dev); + dbg_remove_files(&ci->gadget.dev); + device_unregister(&ci->gadget.dev); /* my kobject is dynamic, I swear! */ - memset(&udc->gadget, 0, sizeof(udc->gadget)); + memset(&ci->gadget, 0, sizeof(ci->gadget)); } /** diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index d4cf9706..d2f7e49 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -19,7 +19,7 @@ struct ci13xxx_platform_data { #define CI13XXX_CONTROLLER_RESET_EVENT 0 #define CI13XXX_CONTROLLER_STOPPED_EVENT 1 - void (*notify_event) (struct ci13xxx *udc, unsigned event); + void (*notify_event) (struct ci13xxx *ci, unsigned event); }; /* Default offset of capability registers */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 1/9] USB: Chipidea: rename struct ci13xxx variables from udc to ci @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel struct ci13xxx represent the controller, which may be device or host, so name its variables as ci. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Marek Vasut <marex@denx.de> --- drivers/usb/chipidea/ci.h | 26 +- drivers/usb/chipidea/ci13xxx_msm.c | 12 +- drivers/usb/chipidea/debug.c | 146 ++++----- drivers/usb/chipidea/udc.c | 628 ++++++++++++++++++------------------ include/linux/usb/chipidea.h | 2 +- 5 files changed, 407 insertions(+), 407 deletions(-) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 0b09330..9655e35 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -36,7 +36,7 @@ * @name: string description of the endpoint * @qh: queue head for this endpoint * @wedge: is the endpoint wedged - * @udc: pointer to the controller + * @ci: pointer to the controller * @lock: pointer to controller's spinlock * @td_pool: pointer to controller's TD pool */ @@ -54,7 +54,7 @@ struct ci13xxx_ep { int wedge; /* global resources */ - struct ci13xxx *udc; + struct ci13xxx *ci; spinlock_t *lock; struct dma_pool *td_pool; }; @@ -250,9 +250,9 @@ static inline int ffs_nr(u32 x) * * This function returns register contents */ -static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask) +static inline u32 hw_read(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask) { - return ioread32(udc->hw_bank.regmap[reg]) & mask; + return ioread32(ci->hw_bank.regmap[reg]) & mask; } /** @@ -261,14 +261,14 @@ static inline u32 hw_read(struct ci13xxx *udc, enum ci13xxx_regs reg, u32 mask) * @mask: bitfield mask * @data: new value */ -static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg, +static inline void hw_write(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask, u32 data) { if (~mask) - data = (ioread32(udc->hw_bank.regmap[reg]) & ~mask) + data = (ioread32(ci->hw_bank.regmap[reg]) & ~mask) | (data & mask); - iowrite32(data, udc->hw_bank.regmap[reg]); + iowrite32(data, ci->hw_bank.regmap[reg]); } /** @@ -278,12 +278,12 @@ static inline void hw_write(struct ci13xxx *udc, enum ci13xxx_regs reg, * * This function returns register contents */ -static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg, +static inline u32 hw_test_and_clear(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask) { - u32 val = ioread32(udc->hw_bank.regmap[reg]) & mask; + u32 val = ioread32(ci->hw_bank.regmap[reg]) & mask; - iowrite32(val, udc->hw_bank.regmap[reg]); + iowrite32(val, ci->hw_bank.regmap[reg]); return val; } @@ -295,12 +295,12 @@ static inline u32 hw_test_and_clear(struct ci13xxx *udc, enum ci13xxx_regs reg, * * This function returns register contents */ -static inline u32 hw_test_and_write(struct ci13xxx *udc, enum ci13xxx_regs reg, +static inline u32 hw_test_and_write(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask, u32 data) { - u32 val = hw_read(udc, reg, ~0); + u32 val = hw_read(ci, reg, ~0); - hw_write(udc, reg, mask, data); + hw_write(ci, reg, mask, data); return (val & mask) >> ffs_nr(mask); } diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c index 12c0dd6..5a2fe5f 100644 --- a/drivers/usb/chipidea/ci13xxx_msm.c +++ b/drivers/usb/chipidea/ci13xxx_msm.c @@ -15,11 +15,11 @@ #include "ci.h" -#define MSM_USB_BASE (udc->hw_bank.abs) +#define MSM_USB_BASE (ci->hw_bank.abs) -static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event) +static void ci13xxx_msm_notify_event(struct ci13xxx *ci, unsigned event) { - struct device *dev = udc->gadget.dev.parent; + struct device *dev = ci->gadget.dev.parent; int val; switch (event) { @@ -34,13 +34,13 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event) * Put the transceiver in non-driving mode. Otherwise host * may not detect soft-disconnection. */ - val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL); + val = usb_phy_io_read(ci->transceiver, ULPI_FUNC_CTRL); val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; - usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL); + usb_phy_io_write(ci->transceiver, val, ULPI_FUNC_CTRL); break; default: - dev_dbg(dev, "unknown ci13xxx_udc event\n"); + dev_dbg(dev, "unknown ci13xxx event\n"); break; } } diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c index c4b3e15..c6f50a2 100644 --- a/drivers/usb/chipidea/debug.c +++ b/drivers/usb/chipidea/debug.c @@ -68,15 +68,15 @@ void dbg_interrupt(u32 intmask) * * This function returns number of registers read */ -static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size) +static size_t hw_register_read(struct ci13xxx *ci, u32 *buf, size_t size) { unsigned i; - if (size > udc->hw_bank.size) - size = udc->hw_bank.size; + if (size > ci->hw_bank.size) + size = ci->hw_bank.size; for (i = 0; i < size; i++) - buf[i] = hw_read(udc, i * sizeof(u32), ~0); + buf[i] = hw_read(ci, i * sizeof(u32), ~0); return size; } @@ -88,18 +88,18 @@ static size_t hw_register_read(struct ci13xxx *udc, u32 *buf, size_t size) * * This function returns an error code */ -static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data) +static int hw_register_write(struct ci13xxx *ci, u16 addr, u32 data) { /* align */ addr /= sizeof(u32); - if (addr >= udc->hw_bank.size) + if (addr >= ci->hw_bank.size) return -EINVAL; /* align */ addr *= sizeof(u32); - hw_write(udc, addr, ~0, data); + hw_write(ci, addr, ~0, data); return 0; } @@ -110,13 +110,13 @@ static int hw_register_write(struct ci13xxx *udc, u16 addr, u32 data) * * This function returns an error code */ -static int hw_intr_clear(struct ci13xxx *udc, int n) +static int hw_intr_clear(struct ci13xxx *ci, int n) { if (n >= REG_BITS) return -EINVAL; - hw_write(udc, OP_USBINTR, BIT(n), 0); - hw_write(udc, OP_USBSTS, BIT(n), BIT(n)); + hw_write(ci, OP_USBINTR, BIT(n), 0); + hw_write(ci, OP_USBSTS, BIT(n), BIT(n)); return 0; } @@ -127,15 +127,15 @@ static int hw_intr_clear(struct ci13xxx *udc, int n) * * This function returns an error code */ -static int hw_intr_force(struct ci13xxx *udc, int n) +static int hw_intr_force(struct ci13xxx *ci, int n) { if (n >= REG_BITS) return -EINVAL; - hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); - hw_write(udc, OP_USBINTR, BIT(n), BIT(n)); - hw_write(udc, OP_USBSTS, BIT(n), BIT(n)); - hw_write(udc, CAP_TESTMODE, TESTMODE_FORCE, 0); + hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, TESTMODE_FORCE); + hw_write(ci, OP_USBINTR, BIT(n), BIT(n)); + hw_write(ci, OP_USBSTS, BIT(n), BIT(n)); + hw_write(ci, CAP_TESTMODE, TESTMODE_FORCE, 0); return 0; } @@ -147,12 +147,12 @@ static int hw_intr_force(struct ci13xxx *udc, int n) static ssize_t show_device(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - struct usb_gadget *gadget = &udc->gadget; + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct usb_gadget *gadget = &ci->gadget; int n = 0; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } @@ -188,8 +188,8 @@ static DEVICE_ATTR(device, S_IRUSR, show_device, NULL); static ssize_t show_driver(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); - struct usb_gadget_driver *driver = udc->driver; + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); + struct usb_gadget_driver *driver = ci->driver; int n = 0; if (attr == NULL || buf == NULL) { @@ -412,22 +412,22 @@ static DEVICE_ATTR(events, S_IRUSR | S_IWUSR, show_events, store_events); static ssize_t show_inters(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; u32 intr; unsigned i, j, n = 0; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } - spin_lock_irqsave(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); /*n += scnprintf(buf + n, PAGE_SIZE - n, - "status = %08x\n", hw_read_intr_status(udc)); + "status = %08x\n", hw_read_intr_status(ci)); n += scnprintf(buf + n, PAGE_SIZE - n, - "enable = %08x\n", hw_read_intr_enable(udc));*/ + "enable = %08x\n", hw_read_intr_enable(ci));*/ n += scnprintf(buf + n, PAGE_SIZE - n, "*test = %d\n", isr_statistics.test); @@ -471,7 +471,7 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr, n += scnprintf(buf + n, PAGE_SIZE - n, "\n"); } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return n; } @@ -485,31 +485,31 @@ static ssize_t show_inters(struct device *dev, struct device_attribute *attr, static ssize_t store_inters(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; unsigned en, bit; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "EINVAL\n"); + dev_err(ci->dev, "EINVAL\n"); goto done; } if (sscanf(buf, "%u %u", &en, &bit) != 2 || en > 1) { - dev_err(udc->dev, "<1|0> <bit>: enable|disable interrupt\n"); + dev_err(ci->dev, "<1|0> <bit>: enable|disable interrupt\n"); goto done; } - spin_lock_irqsave(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); if (en) { - if (hw_intr_force(udc, bit)) + if (hw_intr_force(ci, bit)) dev_err(dev, "invalid bit number\n"); else isr_statistics.test++; } else { - if (hw_intr_clear(udc, bit)) + if (hw_intr_clear(ci, bit)) dev_err(dev, "invalid bit number\n"); } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); done: return count; @@ -524,18 +524,18 @@ static DEVICE_ATTR(inters, S_IRUSR | S_IWUSR, show_inters, store_inters); static ssize_t show_port_test(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; unsigned mode; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "EINVAL\n"); + dev_err(ci->dev, "EINVAL\n"); return 0; } - spin_lock_irqsave(&udc->lock, flags); - mode = hw_port_test_get(udc); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + mode = hw_port_test_get(ci); + spin_unlock_irqrestore(&ci->lock, flags); return scnprintf(buf, PAGE_SIZE, "mode = %u\n", mode); } @@ -549,24 +549,24 @@ static ssize_t store_port_test(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; unsigned mode; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); goto done; } if (sscanf(buf, "%u", &mode) != 1) { - dev_err(udc->dev, "<mode>: set port test mode"); + dev_err(ci->dev, "<mode>: set port test mode"); goto done; } - spin_lock_irqsave(&udc->lock, flags); - if (hw_port_test_set(udc, mode)) - dev_err(udc->dev, "invalid mode\n"); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + if (hw_port_test_set(ci, mode)) + dev_err(ci->dev, "invalid mode\n"); + spin_unlock_irqrestore(&ci->lock, flags); done: return count; @@ -582,20 +582,20 @@ static DEVICE_ATTR(port_test, S_IRUSR | S_IWUSR, static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; unsigned i, j, n = 0; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } - spin_lock_irqsave(&udc->lock, flags); - for (i = 0; i < udc->hw_ep_max/2; i++) { - struct ci13xxx_ep *mEpRx = &udc->ci13xxx_ep[i]; + spin_lock_irqsave(&ci->lock, flags); + for (i = 0; i < ci->hw_ep_max/2; i++) { + struct ci13xxx_ep *mEpRx = &ci->ci13xxx_ep[i]; struct ci13xxx_ep *mEpTx = - &udc->ci13xxx_ep[i + udc->hw_ep_max/2]; + &ci->ci13xxx_ep[i + ci->hw_ep_max/2]; n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: RX=%08X TX=%08X\n", i, (u32)mEpRx->qh.dma, (u32)mEpTx->qh.dma); @@ -606,7 +606,7 @@ static ssize_t show_qheads(struct device *dev, struct device_attribute *attr, *((u32 *)mEpTx->qh.ptr + j)); } } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return n; } @@ -621,25 +621,25 @@ static DEVICE_ATTR(qheads, S_IRUSR, show_qheads, NULL); static ssize_t show_registers(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; u32 *dump; unsigned i, k, n = 0; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } dump = kmalloc(sizeof(u32) * DUMP_ENTRIES, GFP_KERNEL); if (!dump) { - dev_err(udc->dev, "%s: out of memory\n", __func__); + dev_err(ci->dev, "%s: out of memory\n", __func__); return 0; } - spin_lock_irqsave(&udc->lock, flags); - k = hw_register_read(udc, dump, DUMP_ENTRIES); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + k = hw_register_read(ci, dump, DUMP_ENTRIES); + spin_unlock_irqrestore(&ci->lock, flags); for (i = 0; i < k; i++) { n += scnprintf(buf + n, PAGE_SIZE - n, @@ -660,24 +660,24 @@ static ssize_t store_registers(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long addr, data, flags; if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); goto done; } if (sscanf(buf, "%li %li", &addr, &data) != 2) { - dev_err(udc->dev, + dev_err(ci->dev, "<addr> <data>: write data to register address\n"); goto done; } - spin_lock_irqsave(&udc->lock, flags); - if (hw_register_write(udc, addr, data)) - dev_err(udc->dev, "invalid address range\n"); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + if (hw_register_write(ci, addr, data)) + dev_err(ci->dev, "invalid address range\n"); + spin_unlock_irqrestore(&ci->lock, flags); done: return count; @@ -693,34 +693,34 @@ static DEVICE_ATTR(registers, S_IRUSR | S_IWUSR, static ssize_t show_requests(struct device *dev, struct device_attribute *attr, char *buf) { - struct ci13xxx *udc = container_of(dev, struct ci13xxx, gadget.dev); + struct ci13xxx *ci = container_of(dev, struct ci13xxx, gadget.dev); unsigned long flags; struct list_head *ptr = NULL; struct ci13xxx_req *req = NULL; unsigned i, j, n = 0, qSize = sizeof(struct ci13xxx_td)/sizeof(u32); if (attr == NULL || buf == NULL) { - dev_err(udc->dev, "[%s] EINVAL\n", __func__); + dev_err(ci->dev, "[%s] EINVAL\n", __func__); return 0; } - spin_lock_irqsave(&udc->lock, flags); - for (i = 0; i < udc->hw_ep_max; i++) - list_for_each(ptr, &udc->ci13xxx_ep[i].qh.queue) + spin_lock_irqsave(&ci->lock, flags); + for (i = 0; i < ci->hw_ep_max; i++) + list_for_each(ptr, &ci->ci13xxx_ep[i].qh.queue) { req = list_entry(ptr, struct ci13xxx_req, queue); n += scnprintf(buf + n, PAGE_SIZE - n, "EP=%02i: TD=%08X %s\n", - i % udc->hw_ep_max/2, (u32)req->dma, - ((i < udc->hw_ep_max/2) ? "RX" : "TX")); + i % ci->hw_ep_max/2, (u32)req->dma, + ((i < ci->hw_ep_max/2) ? "RX" : "TX")); for (j = 0; j < qSize; j++) n += scnprintf(buf + n, PAGE_SIZE - n, " %04X: %08X\n", j, *((u32 *)req->ptr + j)); } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return n; } diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 3094c85..ba8284e 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -67,11 +67,11 @@ static inline int hw_ep_bit(int num, int dir) return num + (dir ? 16 : 0); } -static inline int ep_to_bit(struct ci13xxx *udc, int n) +static inline int ep_to_bit(struct ci13xxx *ci, int n) { - int fill = 16 - udc->hw_ep_max / 2; + int fill = 16 - ci->hw_ep_max / 2; - if (n >= udc->hw_ep_max / 2) + if (n >= ci->hw_ep_max / 2) n += fill; return n; @@ -84,17 +84,17 @@ static inline int ep_to_bit(struct ci13xxx *udc, int n) * * This function returns an error code */ -static int hw_device_state(struct ci13xxx *udc, u32 dma) +static int hw_device_state(struct ci13xxx *ci, u32 dma) { if (dma) { - hw_write(udc, OP_ENDPTLISTADDR, ~0, dma); + hw_write(ci, OP_ENDPTLISTADDR, ~0, dma); /* interrupt, error, port change, reset, sleep/suspend */ - hw_write(udc, OP_USBINTR, ~0, + hw_write(ci, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(udc, OP_USBCMD, USBCMD_RS, USBCMD_RS); + hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { - hw_write(udc, OP_USBCMD, USBCMD_RS, 0); - hw_write(udc, OP_USBINTR, ~0, 0); + hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + hw_write(ci, OP_USBINTR, ~0, 0); } return 0; } @@ -106,16 +106,16 @@ static int hw_device_state(struct ci13xxx *udc, u32 dma) * * This function returns an error code */ -static int hw_ep_flush(struct ci13xxx *udc, int num, int dir) +static int hw_ep_flush(struct ci13xxx *ci, int num, int dir) { int n = hw_ep_bit(num, dir); do { /* flush any pending transfer */ - hw_write(udc, OP_ENDPTFLUSH, BIT(n), BIT(n)); - while (hw_read(udc, OP_ENDPTFLUSH, BIT(n))) + hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n)); + while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) cpu_relax(); - } while (hw_read(udc, OP_ENDPTSTAT, BIT(n))); + } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); return 0; } @@ -127,10 +127,10 @@ static int hw_ep_flush(struct ci13xxx *udc, int num, int dir) * * This function returns an error code */ -static int hw_ep_disable(struct ci13xxx *udc, int num, int dir) +static int hw_ep_disable(struct ci13xxx *ci, int num, int dir) { - hw_ep_flush(udc, num, dir); - hw_write(udc, OP_ENDPTCTRL + num, + hw_ep_flush(ci, num, dir); + hw_write(ci, OP_ENDPTCTRL + num, dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0); return 0; } @@ -143,7 +143,7 @@ static int hw_ep_disable(struct ci13xxx *udc, int num, int dir) * * This function returns an error code */ -static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type) +static int hw_ep_enable(struct ci13xxx *ci, int num, int dir, int type) { u32 mask, data; @@ -166,7 +166,7 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type) mask |= ENDPTCTRL_RXE; /* enable */ data |= ENDPTCTRL_RXE; } - hw_write(udc, OP_ENDPTCTRL + num, mask, data); + hw_write(ci, OP_ENDPTCTRL + num, mask, data); return 0; } @@ -177,11 +177,11 @@ static int hw_ep_enable(struct ci13xxx *udc, int num, int dir, int type) * * This function returns 1 if endpoint halted */ -static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir) +static int hw_ep_get_halt(struct ci13xxx *ci, int num, int dir) { u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS; - return hw_read(udc, OP_ENDPTCTRL + num, mask) ? 1 : 0; + return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0; } /** @@ -191,10 +191,10 @@ static int hw_ep_get_halt(struct ci13xxx *udc, int num, int dir) * * This function returns setup status */ -static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n) +static int hw_test_and_clear_setup_status(struct ci13xxx *ci, int n) { - n = ep_to_bit(udc, n); - return hw_test_and_clear(udc, OP_ENDPTSETUPSTAT, BIT(n)); + n = ep_to_bit(ci, n); + return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n)); } /** @@ -205,18 +205,18 @@ static int hw_test_and_clear_setup_status(struct ci13xxx *udc, int n) * * This function returns an error code */ -static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl) +static int hw_ep_prime(struct ci13xxx *ci, int num, int dir, int is_ctrl) { int n = hw_ep_bit(num, dir); - if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num))) + if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; - hw_write(udc, OP_ENDPTPRIME, BIT(n), BIT(n)); + hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n)); - while (hw_read(udc, OP_ENDPTPRIME, BIT(n))) + while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) cpu_relax(); - if (is_ctrl && dir == RX && hw_read(udc, OP_ENDPTSETUPSTAT, BIT(num))) + if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; /* status shoult be tested according with manual but it doesn't work */ @@ -232,7 +232,7 @@ static int hw_ep_prime(struct ci13xxx *udc, int num, int dir, int is_ctrl) * * This function returns an error code */ -static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value) +static int hw_ep_set_halt(struct ci13xxx *ci, int num, int dir, int value) { if (value != 0 && value != 1) return -EINVAL; @@ -243,9 +243,9 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value) u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR; /* data toggle - reserved for EP0 but it's in ESS */ - hw_write(udc, reg, mask_xs|mask_xr, + hw_write(ci, reg, mask_xs|mask_xr, value ? mask_xs : mask_xr); - } while (value != hw_ep_get_halt(udc, num, dir)); + } while (value != hw_ep_get_halt(ci, num, dir)); return 0; } @@ -255,10 +255,10 @@ static int hw_ep_set_halt(struct ci13xxx *udc, int num, int dir, int value) * * This function returns true if high speed port */ -static int hw_port_is_high_speed(struct ci13xxx *udc) +static int hw_port_is_high_speed(struct ci13xxx *ci) { - return udc->hw_bank.lpm ? hw_read(udc, OP_DEVLC, DEVLC_PSPD) : - hw_read(udc, OP_PORTSC, PORTSC_HSP); + return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) : + hw_read(ci, OP_PORTSC, PORTSC_HSP); } /** @@ -266,9 +266,9 @@ static int hw_port_is_high_speed(struct ci13xxx *udc) * * This function returns register data */ -static u32 hw_read_intr_enable(struct ci13xxx *udc) +static u32 hw_read_intr_enable(struct ci13xxx *ci) { - return hw_read(udc, OP_USBINTR, ~0); + return hw_read(ci, OP_USBINTR, ~0); } /** @@ -276,9 +276,9 @@ static u32 hw_read_intr_enable(struct ci13xxx *udc) * * This function returns register data */ -static u32 hw_read_intr_status(struct ci13xxx *udc) +static u32 hw_read_intr_status(struct ci13xxx *ci) { - return hw_read(udc, OP_USBSTS, ~0); + return hw_read(ci, OP_USBSTS, ~0); } /** @@ -288,10 +288,10 @@ static u32 hw_read_intr_status(struct ci13xxx *udc) * * This function returns complete status */ -static int hw_test_and_clear_complete(struct ci13xxx *udc, int n) +static int hw_test_and_clear_complete(struct ci13xxx *ci, int n) { - n = ep_to_bit(udc, n); - return hw_test_and_clear(udc, OP_ENDPTCOMPLETE, BIT(n)); + n = ep_to_bit(ci, n); + return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n)); } /** @@ -300,11 +300,11 @@ static int hw_test_and_clear_complete(struct ci13xxx *udc, int n) * * This function returns active interrutps */ -static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc) +static u32 hw_test_and_clear_intr_active(struct ci13xxx *ci) { - u32 reg = hw_read_intr_status(udc) & hw_read_intr_enable(udc); + u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci); - hw_write(udc, OP_USBSTS, ~0, reg); + hw_write(ci, OP_USBSTS, ~0, reg); return reg; } @@ -314,9 +314,9 @@ static u32 hw_test_and_clear_intr_active(struct ci13xxx *udc) * * This function returns guard value */ -static int hw_test_and_clear_setup_guard(struct ci13xxx *udc) +static int hw_test_and_clear_setup_guard(struct ci13xxx *ci) { - return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, 0); + return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0); } /** @@ -325,9 +325,9 @@ static int hw_test_and_clear_setup_guard(struct ci13xxx *udc) * * This function returns guard value */ -static int hw_test_and_set_setup_guard(struct ci13xxx *udc) +static int hw_test_and_set_setup_guard(struct ci13xxx *ci) { - return hw_test_and_write(udc, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); + return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW); } /** @@ -337,9 +337,9 @@ static int hw_test_and_set_setup_guard(struct ci13xxx *udc) * This function explicitly sets the address, without the "USBADRA" (advance) * feature, which is not supported by older versions of the controller. */ -static void hw_usb_set_address(struct ci13xxx *udc, u8 value) +static void hw_usb_set_address(struct ci13xxx *ci, u8 value) { - hw_write(udc, OP_DEVICEADDR, DEVICEADDR_USBADR, + hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR, value << ffs_nr(DEVICEADDR_USBADR)); } @@ -349,21 +349,21 @@ static void hw_usb_set_address(struct ci13xxx *udc, u8 value) * * This function returns an error code */ -static int hw_usb_reset(struct ci13xxx *udc) +static int hw_usb_reset(struct ci13xxx *ci) { - hw_usb_set_address(udc, 0); + hw_usb_set_address(ci, 0); /* ESS flushes only@end?!? */ - hw_write(udc, OP_ENDPTFLUSH, ~0, ~0); + hw_write(ci, OP_ENDPTFLUSH, ~0, ~0); /* clear setup token semaphores */ - hw_write(udc, OP_ENDPTSETUPSTAT, 0, 0); + hw_write(ci, OP_ENDPTSETUPSTAT, 0, 0); /* clear complete status */ - hw_write(udc, OP_ENDPTCOMPLETE, 0, 0); + hw_write(ci, OP_ENDPTCOMPLETE, 0, 0); /* wait until all bits cleared */ - while (hw_read(udc, OP_ENDPTPRIME, ~0)) + while (hw_read(ci, OP_ENDPTPRIME, ~0)) udelay(10); /* not RTOS friendly */ /* reset all endpoints ? */ @@ -395,7 +395,7 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep) */ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) { - struct ci13xxx *udc = mEp->udc; + struct ci13xxx *ci = mEp->ci; unsigned i; int ret = 0; unsigned length = mReq->req.length; @@ -418,7 +418,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) if (!mReq->req.no_interrupt) mReq->zptr->token |= TD_IOC; } - ret = usb_gadget_map_request(&udc->gadget, &mReq->req, mEp->dir); + ret = usb_gadget_map_request(&ci->gadget, &mReq->req, mEp->dir); if (ret) return ret; @@ -454,13 +454,13 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) else mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; wmb(); - if (hw_read(udc, OP_ENDPTPRIME, BIT(n))) + if (hw_read(ci, OP_ENDPTPRIME, BIT(n))) goto done; do { - hw_write(udc, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); - tmp_stat = hw_read(udc, OP_ENDPTSTAT, BIT(n)); - } while (!hw_read(udc, OP_USBCMD, USBCMD_ATDTW)); - hw_write(udc, OP_USBCMD, USBCMD_ATDTW, 0); + hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); + tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n)); + } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW)); + hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0); if (tmp_stat) goto done; } @@ -472,7 +472,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) wmb(); /* synchronize before ep prime */ - ret = hw_ep_prime(udc, mEp->num, mEp->dir, + ret = hw_ep_prime(ci, mEp->num, mEp->dir, mEp->type == USB_ENDPOINT_XFER_CONTROL); done: return ret; @@ -502,7 +502,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) mReq->req.status = 0; - usb_gadget_unmap_request(&mEp->udc->gadget, &mReq->req, mEp->dir); + usb_gadget_unmap_request(&mEp->ci->gadget, &mReq->req, mEp->dir); mReq->req.status = mReq->ptr->token & TD_STATUS; if ((TD_STATUS_HALTED & mReq->req.status) != 0) @@ -534,7 +534,7 @@ __acquires(mEp->lock) if (mEp == NULL) return -EINVAL; - hw_ep_flush(mEp->udc, mEp->num, mEp->dir); + hw_ep_flush(mEp->ci, mEp->num, mEp->dir); while (!list_empty(&mEp->qh.queue)) { @@ -563,33 +563,33 @@ __acquires(mEp->lock) static int _gadget_stop_activity(struct usb_gadget *gadget) { struct usb_ep *ep; - struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget); unsigned long flags; - spin_lock_irqsave(&udc->lock, flags); - udc->gadget.speed = USB_SPEED_UNKNOWN; - udc->remote_wakeup = 0; - udc->suspended = 0; - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + ci->gadget.speed = USB_SPEED_UNKNOWN; + ci->remote_wakeup = 0; + ci->suspended = 0; + spin_unlock_irqrestore(&ci->lock, flags); /* flush all endpoints */ gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); } - usb_ep_fifo_flush(&udc->ep0out->ep); - usb_ep_fifo_flush(&udc->ep0in->ep); + usb_ep_fifo_flush(&ci->ep0out->ep); + usb_ep_fifo_flush(&ci->ep0in->ep); - if (udc->driver) - udc->driver->disconnect(gadget); + if (ci->driver) + ci->driver->disconnect(gadget); /* make sure to disable all endpoints */ gadget_for_each_ep(ep, gadget) { usb_ep_disable(ep); } - if (udc->status != NULL) { - usb_ep_free_request(&udc->ep0in->ep, udc->status); - udc->status = NULL; + if (ci->status != NULL) { + usb_ep_free_request(&ci->ep0in->ep, ci->status); + ci->status = NULL; } return 0; @@ -600,36 +600,36 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) *****************************************************************************/ /** * isr_reset_handler: USB reset interrupt handler - * @udc: UDC device + * @ci: UDC device * * This function resets USB engine after a bus reset occurred */ -static void isr_reset_handler(struct ci13xxx *udc) -__releases(udc->lock) -__acquires(udc->lock) +static void isr_reset_handler(struct ci13xxx *ci) +__releases(ci->lock) +__acquires(ci->lock) { int retval; dbg_event(0xFF, "BUS RST", 0); - spin_unlock(&udc->lock); - retval = _gadget_stop_activity(&udc->gadget); + spin_unlock(&ci->lock); + retval = _gadget_stop_activity(&ci->gadget); if (retval) goto done; - retval = hw_usb_reset(udc); + retval = hw_usb_reset(ci); if (retval) goto done; - udc->status = usb_ep_alloc_request(&udc->ep0in->ep, GFP_ATOMIC); - if (udc->status == NULL) + ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC); + if (ci->status == NULL) retval = -ENOMEM; done: - spin_lock(&udc->lock); + spin_lock(&ci->lock); if (retval) - dev_err(udc->dev, "error: %i\n", retval); + dev_err(ci->dev, "error: %i\n", retval); } /** @@ -650,17 +650,17 @@ static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req) /** * isr_get_status_response: get_status request response - * @udc: udc struct + * @ci: ci struct * @setup: setup request packet * * This function returns an error code */ -static int isr_get_status_response(struct ci13xxx *udc, +static int isr_get_status_response(struct ci13xxx *ci, struct usb_ctrlrequest *setup) __releases(mEp->lock) __acquires(mEp->lock) { - struct ci13xxx_ep *mEp = udc->ep0in; + struct ci13xxx_ep *mEp = ci->ep0in; struct usb_request *req = NULL; gfp_t gfp_flags = GFP_ATOMIC; int dir, num, retval; @@ -684,14 +684,14 @@ __acquires(mEp->lock) if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { /* Assume that device is bus powered for now. */ - *(u16 *)req->buf = udc->remote_wakeup << 1; + *(u16 *)req->buf = ci->remote_wakeup << 1; retval = 0; } else if ((setup->bRequestType & USB_RECIP_MASK) \ == USB_RECIP_ENDPOINT) { dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ? TX : RX; num = le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK; - *(u16 *)req->buf = hw_ep_get_halt(udc, num, dir); + *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir); } /* else do nothing; reserved for future use */ @@ -723,39 +723,39 @@ __acquires(mEp->lock) static void isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) { - struct ci13xxx *udc = req->context; + struct ci13xxx *ci = req->context; unsigned long flags; - if (udc->setaddr) { - hw_usb_set_address(udc, udc->address); - udc->setaddr = false; + if (ci->setaddr) { + hw_usb_set_address(ci, ci->address); + ci->setaddr = false; } - spin_lock_irqsave(&udc->lock, flags); - if (udc->test_mode) - hw_port_test_set(udc, udc->test_mode); - spin_unlock_irqrestore(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); + if (ci->test_mode) + hw_port_test_set(ci, ci->test_mode); + spin_unlock_irqrestore(&ci->lock, flags); } /** * isr_setup_status_phase: queues the status phase of a setup transation - * @udc: udc struct + * @ci: ci struct * * This function returns an error code */ -static int isr_setup_status_phase(struct ci13xxx *udc) +static int isr_setup_status_phase(struct ci13xxx *ci) __releases(mEp->lock) __acquires(mEp->lock) { int retval; struct ci13xxx_ep *mEp; - mEp = (udc->ep0_dir == TX) ? udc->ep0out : udc->ep0in; - udc->status->context = udc; - udc->status->complete = isr_setup_status_complete; + mEp = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; + ci->status->context = ci; + ci->status->complete = isr_setup_status_complete; spin_unlock(mEp->lock); - retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC); + retval = usb_ep_queue(&mEp->ep, ci->status, GFP_ATOMIC); spin_lock(mEp->lock); return retval; @@ -790,7 +790,7 @@ __acquires(mEp->lock) spin_unlock(mEp->lock); if ((mEp->type == USB_ENDPOINT_XFER_CONTROL) && mReq->req.length) - mEpTemp = mEp->udc->ep0in; + mEpTemp = mEp->ci->ep0in; mReq->req.complete(&mEpTemp->ep, &mReq->req); spin_lock(mEp->lock); } @@ -806,48 +806,48 @@ __acquires(mEp->lock) /** * isr_tr_complete_handler: transaction complete interrupt handler - * @udc: UDC descriptor + * @ci: UDC descriptor * * This function handles traffic events */ -static void isr_tr_complete_handler(struct ci13xxx *udc) -__releases(udc->lock) -__acquires(udc->lock) +static void isr_tr_complete_handler(struct ci13xxx *ci) +__releases(ci->lock) +__acquires(ci->lock) { unsigned i; u8 tmode = 0; - for (i = 0; i < udc->hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < ci->hw_ep_max; i++) { + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; int type, num, dir, err = -EINVAL; struct usb_ctrlrequest req; if (mEp->ep.desc == NULL) continue; /* not configured */ - if (hw_test_and_clear_complete(udc, i)) { + if (hw_test_and_clear_complete(ci, i)) { err = isr_tr_complete_low(mEp); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (err > 0) /* needs status phase */ - err = isr_setup_status_phase(udc); + err = isr_setup_status_phase(ci); if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); - spin_unlock(&udc->lock); + spin_unlock(&ci->lock); if (usb_ep_set_halt(&mEp->ep)) - dev_err(udc->dev, + dev_err(ci->dev, "error: ep_set_halt\n"); - spin_lock(&udc->lock); + spin_lock(&ci->lock); } } } if (mEp->type != USB_ENDPOINT_XFER_CONTROL || - !hw_test_and_clear_setup_status(udc, i)) + !hw_test_and_clear_setup_status(ci, i)) continue; if (i != 0) { - dev_warn(udc->dev, "ctrl traffic at endpoint %d\n", i); + dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i); continue; } @@ -855,18 +855,18 @@ __acquires(udc->lock) * Flush data and handshake transactions of previous * setup packet. */ - _ep_nuke(udc->ep0out); - _ep_nuke(udc->ep0in); + _ep_nuke(ci->ep0out); + _ep_nuke(ci->ep0in); /* read_setup_packet */ do { - hw_test_and_set_setup_guard(udc); + hw_test_and_set_setup_guard(ci); memcpy(&req, &mEp->qh.ptr->setup, sizeof(req)); - } while (!hw_test_and_clear_setup_guard(udc)); + } while (!hw_test_and_clear_setup_guard(ci)); type = req.bRequestType; - udc->ep0_dir = (type & USB_DIR_IN) ? TX : RX; + ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; dbg_setup(_usb_addr(mEp), &req); @@ -881,23 +881,23 @@ __acquires(udc->lock) dir = num & USB_ENDPOINT_DIR_MASK; num &= USB_ENDPOINT_NUMBER_MASK; if (dir) /* TX */ - num += udc->hw_ep_max/2; - if (!udc->ci13xxx_ep[num].wedge) { - spin_unlock(&udc->lock); + num += ci->hw_ep_max/2; + if (!ci->ci13xxx_ep[num].wedge) { + spin_unlock(&ci->lock); err = usb_ep_clear_halt( - &udc->ci13xxx_ep[num].ep); - spin_lock(&udc->lock); + &ci->ci13xxx_ep[num].ep); + spin_lock(&ci->lock); if (err) break; } - err = isr_setup_status_phase(udc); + err = isr_setup_status_phase(ci); } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && le16_to_cpu(req.wValue) == USB_DEVICE_REMOTE_WAKEUP) { if (req.wLength != 0) break; - udc->remote_wakeup = 0; - err = isr_setup_status_phase(udc); + ci->remote_wakeup = 0; + err = isr_setup_status_phase(ci); } else { goto delegate; } @@ -910,7 +910,7 @@ __acquires(udc->lock) if (le16_to_cpu(req.wLength) != 2 || le16_to_cpu(req.wValue) != 0) break; - err = isr_get_status_response(udc, &req); + err = isr_get_status_response(ci, &req); break; case USB_REQ_SET_ADDRESS: if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) @@ -918,9 +918,9 @@ __acquires(udc->lock) if (le16_to_cpu(req.wLength) != 0 || le16_to_cpu(req.wIndex) != 0) break; - udc->address = (u8)le16_to_cpu(req.wValue); - udc->setaddr = true; - err = isr_setup_status_phase(udc); + ci->address = (u8)le16_to_cpu(req.wValue); + ci->setaddr = true; + err = isr_setup_status_phase(ci); break; case USB_REQ_SET_FEATURE: if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && @@ -932,20 +932,20 @@ __acquires(udc->lock) dir = num & USB_ENDPOINT_DIR_MASK; num &= USB_ENDPOINT_NUMBER_MASK; if (dir) /* TX */ - num += udc->hw_ep_max/2; + num += ci->hw_ep_max/2; - spin_unlock(&udc->lock); - err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep); - spin_lock(&udc->lock); + spin_unlock(&ci->lock); + err = usb_ep_set_halt(&ci->ci13xxx_ep[num].ep); + spin_lock(&ci->lock); if (!err) - isr_setup_status_phase(udc); + isr_setup_status_phase(ci); } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { if (req.wLength != 0) break; switch (le16_to_cpu(req.wValue)) { case USB_DEVICE_REMOTE_WAKEUP: - udc->remote_wakeup = 1; - err = isr_setup_status_phase(udc); + ci->remote_wakeup = 1; + err = isr_setup_status_phase(ci); break; case USB_DEVICE_TEST_MODE: tmode = le16_to_cpu(req.wIndex) >> 8; @@ -955,9 +955,9 @@ __acquires(udc->lock) case TEST_SE0_NAK: case TEST_PACKET: case TEST_FORCE_EN: - udc->test_mode = tmode; + ci->test_mode = tmode; err = isr_setup_status_phase( - udc); + ci); break; default: break; @@ -972,21 +972,21 @@ __acquires(udc->lock) default: delegate: if (req.wLength == 0) /* no data phase */ - udc->ep0_dir = TX; + ci->ep0_dir = TX; - spin_unlock(&udc->lock); - err = udc->driver->setup(&udc->gadget, &req); - spin_lock(&udc->lock); + spin_unlock(&ci->lock); + err = ci->driver->setup(&ci->gadget, &req); + spin_lock(&ci->lock); break; } if (err < 0) { dbg_event(_usb_addr(mEp), "ERROR", err); - spin_unlock(&udc->lock); + spin_unlock(&ci->lock); if (usb_ep_set_halt(&mEp->ep)) - dev_err(udc->dev, "error: ep_set_halt\n"); - spin_lock(&udc->lock); + dev_err(ci->dev, "error: ep_set_halt\n"); + spin_lock(&ci->lock); } } } @@ -1016,7 +1016,7 @@ static int ep_enable(struct usb_ep *ep, mEp->ep.desc = desc; if (!list_empty(&mEp->qh.queue)) - dev_warn(mEp->udc->dev, "enabling a non-empty endpoint!\n"); + dev_warn(mEp->ci->dev, "enabling a non-empty endpoint!\n"); mEp->dir = usb_endpoint_dir_in(desc) ? TX : RX; mEp->num = usb_endpoint_num(desc); @@ -1044,7 +1044,7 @@ static int ep_enable(struct usb_ep *ep, * is always enabled */ if (mEp->num) - retval |= hw_ep_enable(mEp->udc, mEp->num, mEp->dir, mEp->type); + retval |= hw_ep_enable(mEp->ci, mEp->num, mEp->dir, mEp->type); spin_unlock_irqrestore(mEp->lock, flags); return retval; @@ -1075,7 +1075,7 @@ static int ep_disable(struct usb_ep *ep) dbg_event(_usb_addr(mEp), "DISABLE", 0); retval |= _ep_nuke(mEp); - retval |= hw_ep_disable(mEp->udc, mEp->num, mEp->dir); + retval |= hw_ep_disable(mEp->ci, mEp->num, mEp->dir); if (mEp->type == USB_ENDPOINT_XFER_CONTROL) mEp->dir = (mEp->dir == TX) ? RX : TX; @@ -1132,7 +1132,7 @@ static void ep_free_request(struct usb_ep *ep, struct usb_request *req) if (ep == NULL || req == NULL) { return; } else if (!list_empty(&mReq->queue)) { - dev_err(mEp->udc->dev, "freeing queued request\n"); + dev_err(mEp->ci->dev, "freeing queued request\n"); return; } @@ -1157,7 +1157,7 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, { struct ci13xxx_ep *mEp = container_of(ep, struct ci13xxx_ep, ep); struct ci13xxx_req *mReq = container_of(req, struct ci13xxx_req, req); - struct ci13xxx *udc = mEp->udc; + struct ci13xxx *ci = mEp->ci; int retval = 0; unsigned long flags; @@ -1168,12 +1168,12 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, if (mEp->type == USB_ENDPOINT_XFER_CONTROL) { if (req->length) - mEp = (udc->ep0_dir == RX) ? - udc->ep0out : udc->ep0in; + mEp = (ci->ep0_dir == RX) ? + ci->ep0out : ci->ep0in; if (!list_empty(&mEp->qh.queue)) { _ep_nuke(mEp); retval = -EOVERFLOW; - dev_warn(mEp->udc->dev, "endpoint ctrl %X nuked\n", + dev_warn(mEp->ci->dev, "endpoint ctrl %X nuked\n", _usb_addr(mEp)); } } @@ -1181,14 +1181,14 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, /* first nuke then test link, e.g. previous status has not sent */ if (!list_empty(&mReq->queue)) { retval = -EBUSY; - dev_err(mEp->udc->dev, "request already in queue\n"); + dev_err(mEp->ci->dev, "request already in queue\n"); goto done; } if (req->length > 4 * CI13XXX_PAGE_SIZE) { req->length = 4 * CI13XXX_PAGE_SIZE; retval = -EMSGSIZE; - dev_warn(mEp->udc->dev, "request length truncated\n"); + dev_warn(mEp->ci->dev, "request length truncated\n"); } dbg_queue(_usb_addr(mEp), req, retval); @@ -1231,12 +1231,12 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) dbg_event(_usb_addr(mEp), "DEQUEUE", 0); - hw_ep_flush(mEp->udc, mEp->num, mEp->dir); + hw_ep_flush(mEp->ci, mEp->num, mEp->dir); /* pop request */ list_del_init(&mReq->queue); - usb_gadget_unmap_request(&mEp->udc->gadget, req, mEp->dir); + usb_gadget_unmap_request(&mEp->ci->gadget, req, mEp->dir); req->status = -ECONNRESET; @@ -1278,7 +1278,7 @@ static int ep_set_halt(struct usb_ep *ep, int value) direction = mEp->dir; do { dbg_event(_usb_addr(mEp), "HALT", value); - retval |= hw_ep_set_halt(mEp->udc, mEp->num, mEp->dir, value); + retval |= hw_ep_set_halt(mEp->ci, mEp->num, mEp->dir, value); if (!value) mEp->wedge = 0; @@ -1326,14 +1326,14 @@ static void ep_fifo_flush(struct usb_ep *ep) unsigned long flags; if (ep == NULL) { - dev_err(mEp->udc->dev, "%02X: -EINVAL\n", _usb_addr(mEp)); + dev_err(mEp->ci->dev, "%02X: -EINVAL\n", _usb_addr(mEp)); return; } spin_lock_irqsave(mEp->lock, flags); dbg_event(_usb_addr(mEp), "FFLUSH", 0); - hw_ep_flush(mEp->udc, mEp->num, mEp->dir); + hw_ep_flush(mEp->ci, mEp->num, mEp->dir); spin_unlock_irqrestore(mEp->lock, flags); } @@ -1359,30 +1359,30 @@ static const struct usb_ep_ops usb_ep_ops = { *****************************************************************************/ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) { - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); unsigned long flags; int gadget_ready = 0; - if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS)) + if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS)) return -EOPNOTSUPP; - spin_lock_irqsave(&udc->lock, flags); - udc->vbus_active = is_active; - if (udc->driver) + spin_lock_irqsave(&ci->lock, flags); + ci->vbus_active = is_active; + if (ci->driver) gadget_ready = 1; - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); if (gadget_ready) { if (is_active) { pm_runtime_get_sync(&_gadget->dev); - hw_device_reset(udc, USBMODE_CM_DC); - hw_device_state(udc, udc->ep0out->qh.dma); + hw_device_reset(ci, USBMODE_CM_DC); + hw_device_state(ci, ci->ep0out->qh.dma); } else { - hw_device_state(udc, 0); - if (udc->platdata->notify_event) - udc->platdata->notify_event(udc, + hw_device_state(ci, 0); + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, CI13XXX_CONTROLLER_STOPPED_EVENT); - _gadget_stop_activity(&udc->gadget); + _gadget_stop_activity(&ci->gadget); pm_runtime_put_sync(&_gadget->dev); } } @@ -1392,31 +1392,31 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) static int ci13xxx_wakeup(struct usb_gadget *_gadget) { - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); unsigned long flags; int ret = 0; - spin_lock_irqsave(&udc->lock, flags); - if (!udc->remote_wakeup) { + spin_lock_irqsave(&ci->lock, flags); + if (!ci->remote_wakeup) { ret = -EOPNOTSUPP; goto out; } - if (!hw_read(udc, OP_PORTSC, PORTSC_SUSP)) { + if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) { ret = -EINVAL; goto out; } - hw_write(udc, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); + hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR); out: - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return ret; } static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) { - struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); - if (udc->transceiver) - return usb_phy_set_power(udc->transceiver, mA); + if (ci->transceiver) + return usb_phy_set_power(ci->transceiver, mA); return -ENOTSUPP; } @@ -1437,28 +1437,28 @@ static const struct usb_gadget_ops usb_gadget_ops = { .udc_stop = ci13xxx_stop, }; -static int init_eps(struct ci13xxx *udc) +static int init_eps(struct ci13xxx *ci) { int retval = 0, i, j; - for (i = 0; i < udc->hw_ep_max/2; i++) + for (i = 0; i < ci->hw_ep_max/2; i++) for (j = RX; j <= TX; j++) { - int k = i + j * udc->hw_ep_max/2; - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[k]; + int k = i + j * ci->hw_ep_max/2; + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[k]; scnprintf(mEp->name, sizeof(mEp->name), "ep%i%s", i, (j == TX) ? "in" : "out"); - mEp->udc = udc; - mEp->lock = &udc->lock; - mEp->td_pool = udc->td_pool; + mEp->ci = ci; + mEp->lock = &ci->lock; + mEp->td_pool = ci->td_pool; mEp->ep.name = mEp->name; mEp->ep.ops = &usb_ep_ops; mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; INIT_LIST_HEAD(&mEp->qh.queue); - mEp->qh.ptr = dma_pool_alloc(udc->qh_pool, GFP_KERNEL, + mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, &mEp->qh.dma); if (mEp->qh.ptr == NULL) retval = -ENOMEM; @@ -1471,14 +1471,14 @@ static int init_eps(struct ci13xxx *udc) */ if (i == 0) { if (j == RX) - udc->ep0out = mEp; + ci->ep0out = mEp; else - udc->ep0in = mEp; + ci->ep0in = mEp; continue; } - list_add_tail(&mEp->ep.ep_list, &udc->gadget.ep_list); + list_add_tail(&mEp->ep.ep_list, &ci->gadget.ep_list); } return retval; @@ -1494,7 +1494,7 @@ static int init_eps(struct ci13xxx *udc) static int ci13xxx_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { - struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget); unsigned long flags; int retval = -ENOMEM; @@ -1502,35 +1502,35 @@ static int ci13xxx_start(struct usb_gadget *gadget, return -EINVAL; - udc->ep0out->ep.desc = &ctrl_endpt_out_desc; - retval = usb_ep_enable(&udc->ep0out->ep); + ci->ep0out->ep.desc = &ctrl_endpt_out_desc; + retval = usb_ep_enable(&ci->ep0out->ep); if (retval) return retval; - udc->ep0in->ep.desc = &ctrl_endpt_in_desc; - retval = usb_ep_enable(&udc->ep0in->ep); + ci->ep0in->ep.desc = &ctrl_endpt_in_desc; + retval = usb_ep_enable(&ci->ep0in->ep); if (retval) return retval; - spin_lock_irqsave(&udc->lock, flags); - - udc->driver = driver; - pm_runtime_get_sync(&udc->gadget.dev); - if (udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) { - if (udc->vbus_active) { - if (udc->platdata->flags & CI13XXX_REGS_SHARED) - hw_device_reset(udc, USBMODE_CM_DC); + spin_lock_irqsave(&ci->lock, flags); + + ci->driver = driver; + pm_runtime_get_sync(&ci->gadget.dev); + if (ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) { + if (ci->vbus_active) { + if (ci->platdata->flags & CI13XXX_REGS_SHARED) + hw_device_reset(ci, USBMODE_CM_DC); } else { - pm_runtime_put_sync(&udc->gadget.dev); + pm_runtime_put_sync(&ci->gadget.dev); goto done; } } - retval = hw_device_state(udc, udc->ep0out->qh.dma); + retval = hw_device_state(ci, ci->ep0out->qh.dma); if (retval) - pm_runtime_put_sync(&udc->gadget.dev); + pm_runtime_put_sync(&ci->gadget.dev); done: - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return retval; } @@ -1540,25 +1540,25 @@ static int ci13xxx_start(struct usb_gadget *gadget, static int ci13xxx_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver) { - struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); + struct ci13xxx *ci = container_of(gadget, struct ci13xxx, gadget); unsigned long flags; - spin_lock_irqsave(&udc->lock, flags); + spin_lock_irqsave(&ci->lock, flags); - if (!(udc->platdata->flags & CI13XXX_PULLUP_ON_VBUS) || - udc->vbus_active) { - hw_device_state(udc, 0); - if (udc->platdata->notify_event) - udc->platdata->notify_event(udc, + if (!(ci->platdata->flags & CI13XXX_PULLUP_ON_VBUS) || + ci->vbus_active) { + hw_device_state(ci, 0); + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, CI13XXX_CONTROLLER_STOPPED_EVENT); - udc->driver = NULL; - spin_unlock_irqrestore(&udc->lock, flags); - _gadget_stop_activity(&udc->gadget); - spin_lock_irqsave(&udc->lock, flags); - pm_runtime_put(&udc->gadget.dev); + ci->driver = NULL; + spin_unlock_irqrestore(&ci->lock, flags); + _gadget_stop_activity(&ci->gadget); + spin_lock_irqsave(&ci->lock, flags); + pm_runtime_put(&ci->gadget.dev); } - spin_unlock_irqrestore(&udc->lock, flags); + spin_unlock_irqrestore(&ci->lock, flags); return 0; } @@ -1567,64 +1567,64 @@ static int ci13xxx_stop(struct usb_gadget *gadget, * BUS block *****************************************************************************/ /** - * udc_irq: udc interrupt handler + * udc_irq: ci interrupt handler * * This function returns IRQ_HANDLED if the IRQ has been handled * It locks access to registers */ -static irqreturn_t udc_irq(struct ci13xxx *udc) +static irqreturn_t udc_irq(struct ci13xxx *ci) { irqreturn_t retval; u32 intr; - if (udc == NULL) + if (ci == NULL) return IRQ_HANDLED; - spin_lock(&udc->lock); + spin_lock(&ci->lock); - if (udc->platdata->flags & CI13XXX_REGS_SHARED) { - if (hw_read(udc, OP_USBMODE, USBMODE_CM) != + if (ci->platdata->flags & CI13XXX_REGS_SHARED) { + if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) { - spin_unlock(&udc->lock); + spin_unlock(&ci->lock); return IRQ_NONE; } } - intr = hw_test_and_clear_intr_active(udc); + intr = hw_test_and_clear_intr_active(ci); dbg_interrupt(intr); if (intr) { /* order defines priority - do NOT change it */ if (USBi_URI & intr) - isr_reset_handler(udc); + isr_reset_handler(ci); if (USBi_PCI & intr) { - udc->gadget.speed = hw_port_is_high_speed(udc) ? + ci->gadget.speed = hw_port_is_high_speed(ci) ? USB_SPEED_HIGH : USB_SPEED_FULL; - if (udc->suspended && udc->driver->resume) { - spin_unlock(&udc->lock); - udc->driver->resume(&udc->gadget); - spin_lock(&udc->lock); - udc->suspended = 0; + if (ci->suspended && ci->driver->resume) { + spin_unlock(&ci->lock); + ci->driver->resume(&ci->gadget); + spin_lock(&ci->lock); + ci->suspended = 0; } } if (USBi_UI & intr) - isr_tr_complete_handler(udc); + isr_tr_complete_handler(ci); if (USBi_SLI & intr) { - if (udc->gadget.speed != USB_SPEED_UNKNOWN && - udc->driver->suspend) { - udc->suspended = 1; - spin_unlock(&udc->lock); - udc->driver->suspend(&udc->gadget); - spin_lock(&udc->lock); + if (ci->gadget.speed != USB_SPEED_UNKNOWN && + ci->driver->suspend) { + ci->suspended = 1; + spin_unlock(&ci->lock); + ci->driver->suspend(&ci->gadget); + spin_lock(&ci->lock); } } retval = IRQ_HANDLED; } else { retval = IRQ_NONE; } - spin_unlock(&udc->lock); + spin_unlock(&ci->lock); return retval; } @@ -1641,109 +1641,109 @@ static void udc_release(struct device *dev) /** * udc_start: initialize gadget role - * @udc: chipidea controller + * @ci: chipidea controller */ -static int udc_start(struct ci13xxx *udc) +static int udc_start(struct ci13xxx *ci) { - struct device *dev = udc->dev; + struct device *dev = ci->dev; int retval = 0; - spin_lock_init(&udc->lock); + spin_lock_init(&ci->lock); - udc->gadget.ops = &usb_gadget_ops; - udc->gadget.speed = USB_SPEED_UNKNOWN; - udc->gadget.max_speed = USB_SPEED_HIGH; - udc->gadget.is_otg = 0; - udc->gadget.name = udc->platdata->name; + ci->gadget.ops = &usb_gadget_ops; + ci->gadget.speed = USB_SPEED_UNKNOWN; + ci->gadget.max_speed = USB_SPEED_HIGH; + ci->gadget.is_otg = 0; + ci->gadget.name = ci->platdata->name; - INIT_LIST_HEAD(&udc->gadget.ep_list); + INIT_LIST_HEAD(&ci->gadget.ep_list); - dev_set_name(&udc->gadget.dev, "gadget"); - udc->gadget.dev.dma_mask = dev->dma_mask; - udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask; - udc->gadget.dev.parent = dev; - udc->gadget.dev.release = udc_release; + dev_set_name(&ci->gadget.dev, "gadget"); + ci->gadget.dev.dma_mask = dev->dma_mask; + ci->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask; + ci->gadget.dev.parent = dev; + ci->gadget.dev.release = udc_release; /* alloc resources */ - udc->qh_pool = dma_pool_create("ci13xxx_qh", dev, + ci->qh_pool = dma_pool_create("ci13xxx_qh", dev, sizeof(struct ci13xxx_qh), 64, CI13XXX_PAGE_SIZE); - if (udc->qh_pool == NULL) + if (ci->qh_pool == NULL) return -ENOMEM; - udc->td_pool = dma_pool_create("ci13xxx_td", dev, + ci->td_pool = dma_pool_create("ci13xxx_td", dev, sizeof(struct ci13xxx_td), 64, CI13XXX_PAGE_SIZE); - if (udc->td_pool == NULL) { + if (ci->td_pool == NULL) { retval = -ENOMEM; goto free_qh_pool; } - retval = init_eps(udc); + retval = init_eps(ci); if (retval) goto free_pools; - udc->gadget.ep0 = &udc->ep0in->ep; + ci->gadget.ep0 = &ci->ep0in->ep; - udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); - if (udc->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { - if (udc->transceiver == NULL) { + if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { + if (ci->transceiver == NULL) { retval = -ENODEV; goto free_pools; } } - if (!(udc->platdata->flags & CI13XXX_REGS_SHARED)) { - retval = hw_device_reset(udc, USBMODE_CM_DC); + if (!(ci->platdata->flags & CI13XXX_REGS_SHARED)) { + retval = hw_device_reset(ci, USBMODE_CM_DC); if (retval) goto put_transceiver; } - retval = device_register(&udc->gadget.dev); + retval = device_register(&ci->gadget.dev); if (retval) { - put_device(&udc->gadget.dev); + put_device(&ci->gadget.dev); goto put_transceiver; } - retval = dbg_create_files(&udc->gadget.dev); + retval = dbg_create_files(&ci->gadget.dev); if (retval) goto unreg_device; - if (!IS_ERR_OR_NULL(udc->transceiver)) { - retval = otg_set_peripheral(udc->transceiver->otg, - &udc->gadget); + if (!IS_ERR_OR_NULL(ci->transceiver)) { + retval = otg_set_peripheral(ci->transceiver->otg, + &ci->gadget); if (retval) goto remove_dbg; } - retval = usb_add_gadget_udc(dev, &udc->gadget); + retval = usb_add_gadget_udc(dev, &ci->gadget); if (retval) goto remove_trans; - pm_runtime_no_callbacks(&udc->gadget.dev); - pm_runtime_enable(&udc->gadget.dev); + pm_runtime_no_callbacks(&ci->gadget.dev); + pm_runtime_enable(&ci->gadget.dev); return retval; remove_trans: - if (!IS_ERR_OR_NULL(udc->transceiver)) { - otg_set_peripheral(udc->transceiver->otg, &udc->gadget); - usb_put_phy(udc->transceiver); + if (!IS_ERR_OR_NULL(ci->transceiver)) { + otg_set_peripheral(ci->transceiver->otg, &ci->gadget); + usb_put_phy(ci->transceiver); } dev_err(dev, "error = %i\n", retval); remove_dbg: - dbg_remove_files(&udc->gadget.dev); + dbg_remove_files(&ci->gadget.dev); unreg_device: - device_unregister(&udc->gadget.dev); + device_unregister(&ci->gadget.dev); put_transceiver: - if (!IS_ERR_OR_NULL(udc->transceiver)) - usb_put_phy(udc->transceiver); + if (!IS_ERR_OR_NULL(ci->transceiver)) + usb_put_phy(ci->transceiver); free_pools: - dma_pool_destroy(udc->td_pool); + dma_pool_destroy(ci->td_pool); free_qh_pool: - dma_pool_destroy(udc->qh_pool); + dma_pool_destroy(ci->qh_pool); return retval; } @@ -1752,32 +1752,32 @@ free_qh_pool: * * No interrupts active, the IRQ has been released */ -static void udc_stop(struct ci13xxx *udc) +static void udc_stop(struct ci13xxx *ci) { int i; - if (udc == NULL) + if (ci == NULL) return; - usb_del_gadget_udc(&udc->gadget); + usb_del_gadget_udc(&ci->gadget); - for (i = 0; i < udc->hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &udc->ci13xxx_ep[i]; + for (i = 0; i < ci->hw_ep_max; i++) { + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; - dma_pool_free(udc->qh_pool, mEp->qh.ptr, mEp->qh.dma); + dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); } - dma_pool_destroy(udc->td_pool); - dma_pool_destroy(udc->qh_pool); + dma_pool_destroy(ci->td_pool); + dma_pool_destroy(ci->qh_pool); - if (!IS_ERR_OR_NULL(udc->transceiver)) { - otg_set_peripheral(udc->transceiver->otg, NULL); - usb_put_phy(udc->transceiver); + if (!IS_ERR_OR_NULL(ci->transceiver)) { + otg_set_peripheral(ci->transceiver->otg, NULL); + usb_put_phy(ci->transceiver); } - dbg_remove_files(&udc->gadget.dev); - device_unregister(&udc->gadget.dev); + dbg_remove_files(&ci->gadget.dev); + device_unregister(&ci->gadget.dev); /* my kobject is dynamic, I swear! */ - memset(&udc->gadget, 0, sizeof(udc->gadget)); + memset(&ci->gadget, 0, sizeof(ci->gadget)); } /** diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index d4cf9706..d2f7e49 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -19,7 +19,7 @@ struct ci13xxx_platform_data { #define CI13XXX_CONTROLLER_RESET_EVENT 0 #define CI13XXX_CONTROLLER_STOPPED_EVENT 1 - void (*notify_event) (struct ci13xxx *udc, unsigned event); + void (*notify_event) (struct ci13xxx *ci, unsigned event); }; /* Default offset of capability registers */ -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 2/9] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ Platform drivers do the similar things to add/remove ci13xxx device, so create a unified one. Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> --- drivers/usb/chipidea/ci13xxx_msm.c | 34 ++++++---------------------- drivers/usb/chipidea/ci13xxx_pci.c | 34 +++++----------------------- drivers/usb/chipidea/core.c | 43 ++++++++++++++++++++++++++++++++++++ include/linux/usb/chipidea.h | 7 ++++++ 4 files changed, 63 insertions(+), 55 deletions(-) diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c index 5a2fe5f..b01feb3 100644 --- a/drivers/usb/chipidea/ci13xxx_msm.c +++ b/drivers/usb/chipidea/ci13xxx_msm.c @@ -58,43 +58,23 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = { static int __devinit ci13xxx_msm_probe(struct platform_device *pdev) { struct platform_device *plat_ci; - int ret; dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n"); - plat_ci = platform_device_alloc("ci_hdrc", -1); - if (!plat_ci) { - dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n"); - return -ENOMEM; + plat_ci = ci13xxx_add_device(&pdev->dev, + pdev->resource, pdev->num_resources, + &ci13xxx_msm_platdata); + if (IS_ERR(plat_ci)) { + dev_err(&pdev->dev, "ci13xxx_add_device failed!\n"); + return PTR_ERR(plat_ci); } - ret = platform_device_add_resources(plat_ci, pdev->resource, - pdev->num_resources); - if (ret) { - dev_err(&pdev->dev, "can't add resources to platform device\n"); - goto put_platform; - } - - ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata, - sizeof(ci13xxx_msm_platdata)); - if (ret) - goto put_platform; - - ret = platform_device_add(plat_ci); - if (ret) - goto put_platform; - platform_set_drvdata(pdev, plat_ci); pm_runtime_no_callbacks(&pdev->dev); pm_runtime_enable(&pdev->dev); return 0; - -put_platform: - platform_device_put(plat_ci); - - return ret; } static int __devexit ci13xxx_msm_remove(struct platform_device *pdev) @@ -102,7 +82,7 @@ static int __devexit ci13xxx_msm_remove(struct platform_device *pdev) struct platform_device *plat_ci = platform_get_drvdata(pdev); pm_runtime_disable(&pdev->dev); - platform_device_unregister(plat_ci); + ci13xxx_remove_device(plat_ci); return 0; } diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c index cdcac3a..918e149 100644 --- a/drivers/usb/chipidea/ci13xxx_pci.c +++ b/drivers/usb/chipidea/ci13xxx_pci.c @@ -75,13 +75,6 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, pci_set_master(pdev); pci_try_set_mwi(pdev); - plat_ci = platform_device_alloc("ci_hdrc", -1); - if (!plat_ci) { - dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n"); - retval = -ENOMEM; - goto disable_device; - } - memset(res, 0, sizeof(res)); res[0].start = pci_resource_start(pdev, 0); res[0].end = pci_resource_end(pdev, 0); @@ -89,32 +82,17 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, res[1].start = pdev->irq; res[1].flags = IORESOURCE_IRQ; - retval = platform_device_add_resources(plat_ci, res, nres); - if (retval) { - dev_err(&pdev->dev, "can't add resources to platform device\n"); - goto put_platform; + plat_ci = ci13xxx_add_device(&pdev->dev, res, nres, platdata); + if (IS_ERR(plat_ci)) { + dev_err(&pdev->dev, "ci13xxx_add_device failed!\n"); + retval = PTR_ERR(plat_ci); + goto disable_device; } - retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata)); - if (retval) - goto put_platform; - - dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask); - plat_ci->dev.dma_mask = pdev->dev.dma_mask; - plat_ci->dev.dma_parms = pdev->dev.dma_parms; - plat_ci->dev.parent = &pdev->dev; - pci_set_drvdata(pdev, plat_ci); - retval = platform_device_add(plat_ci); - if (retval) - goto put_platform; - return 0; - put_platform: - pci_set_drvdata(pdev, NULL); - platform_device_put(plat_ci); disable_device: pci_disable_device(pdev); done: @@ -133,7 +111,7 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev) { struct platform_device *plat_ci = pci_get_drvdata(pdev); - platform_device_unregister(plat_ci); + ci13xxx_remove_device(plat_ci); pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); } diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 9a883bd..8b9d06f 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -332,6 +332,49 @@ static irqreturn_t ci_irq(int irq, void *data) return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci); } +struct platform_device *ci13xxx_add_device(struct device *dev, + struct resource *res, int nres, + struct ci13xxx_platform_data *platdata) +{ + struct platform_device *pdev; + int ret; + + /* FIXME: find a way to choose id */ + pdev = platform_device_alloc("ci_hdrc", -1); + if (!pdev) + return ERR_PTR(-ENOMEM); + + pdev->dev.parent = dev; + pdev->dev.dma_mask = dev->dma_mask; + pdev->dev.dma_parms = dev->dma_parms; + dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask); + + ret = platform_device_add_resources(pdev, res, nres); + if (ret) + goto err; + + ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); + if (ret) + goto err; + + ret = platform_device_add(pdev); + if (ret) + goto err; + + return pdev; + +err: + platform_device_put(pdev); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(ci13xxx_add_device); + +void ci13xxx_remove_device(struct platform_device *pdev) +{ + platform_device_unregister(pdev); +} +EXPORT_SYMBOL_GPL(ci13xxx_remove_device); + static int __devinit ci_hdrc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index d2f7e49..be078f0 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -25,4 +25,11 @@ struct ci13xxx_platform_data { /* Default offset of capability registers */ #define DEF_CAPOFFSET 0x100 +/* Add ci13xxx device */ +struct platform_device *ci13xxx_add_device(struct device *dev, + struct resource *res, int nres, + struct ci13xxx_platform_data *platdata); +/* Remove ci13xxx device */ +void ci13xxx_remove_device(struct platform_device *pdev); + #endif -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 2/9] USB: Chipidea: add unified ci13xxx_{add, remove}_device for platform drivers @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel Platform drivers do the similar things to add/remove ci13xxx device, so create a unified one. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> --- drivers/usb/chipidea/ci13xxx_msm.c | 34 ++++++---------------------- drivers/usb/chipidea/ci13xxx_pci.c | 34 +++++----------------------- drivers/usb/chipidea/core.c | 43 ++++++++++++++++++++++++++++++++++++ include/linux/usb/chipidea.h | 7 ++++++ 4 files changed, 63 insertions(+), 55 deletions(-) diff --git a/drivers/usb/chipidea/ci13xxx_msm.c b/drivers/usb/chipidea/ci13xxx_msm.c index 5a2fe5f..b01feb3 100644 --- a/drivers/usb/chipidea/ci13xxx_msm.c +++ b/drivers/usb/chipidea/ci13xxx_msm.c @@ -58,43 +58,23 @@ static struct ci13xxx_platform_data ci13xxx_msm_platdata = { static int __devinit ci13xxx_msm_probe(struct platform_device *pdev) { struct platform_device *plat_ci; - int ret; dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n"); - plat_ci = platform_device_alloc("ci_hdrc", -1); - if (!plat_ci) { - dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n"); - return -ENOMEM; + plat_ci = ci13xxx_add_device(&pdev->dev, + pdev->resource, pdev->num_resources, + &ci13xxx_msm_platdata); + if (IS_ERR(plat_ci)) { + dev_err(&pdev->dev, "ci13xxx_add_device failed!\n"); + return PTR_ERR(plat_ci); } - ret = platform_device_add_resources(plat_ci, pdev->resource, - pdev->num_resources); - if (ret) { - dev_err(&pdev->dev, "can't add resources to platform device\n"); - goto put_platform; - } - - ret = platform_device_add_data(plat_ci, &ci13xxx_msm_platdata, - sizeof(ci13xxx_msm_platdata)); - if (ret) - goto put_platform; - - ret = platform_device_add(plat_ci); - if (ret) - goto put_platform; - platform_set_drvdata(pdev, plat_ci); pm_runtime_no_callbacks(&pdev->dev); pm_runtime_enable(&pdev->dev); return 0; - -put_platform: - platform_device_put(plat_ci); - - return ret; } static int __devexit ci13xxx_msm_remove(struct platform_device *pdev) @@ -102,7 +82,7 @@ static int __devexit ci13xxx_msm_remove(struct platform_device *pdev) struct platform_device *plat_ci = platform_get_drvdata(pdev); pm_runtime_disable(&pdev->dev); - platform_device_unregister(plat_ci); + ci13xxx_remove_device(plat_ci); return 0; } diff --git a/drivers/usb/chipidea/ci13xxx_pci.c b/drivers/usb/chipidea/ci13xxx_pci.c index cdcac3a..918e149 100644 --- a/drivers/usb/chipidea/ci13xxx_pci.c +++ b/drivers/usb/chipidea/ci13xxx_pci.c @@ -75,13 +75,6 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, pci_set_master(pdev); pci_try_set_mwi(pdev); - plat_ci = platform_device_alloc("ci_hdrc", -1); - if (!plat_ci) { - dev_err(&pdev->dev, "can't allocate ci_hdrc platform device\n"); - retval = -ENOMEM; - goto disable_device; - } - memset(res, 0, sizeof(res)); res[0].start = pci_resource_start(pdev, 0); res[0].end = pci_resource_end(pdev, 0); @@ -89,32 +82,17 @@ static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev, res[1].start = pdev->irq; res[1].flags = IORESOURCE_IRQ; - retval = platform_device_add_resources(plat_ci, res, nres); - if (retval) { - dev_err(&pdev->dev, "can't add resources to platform device\n"); - goto put_platform; + plat_ci = ci13xxx_add_device(&pdev->dev, res, nres, platdata); + if (IS_ERR(plat_ci)) { + dev_err(&pdev->dev, "ci13xxx_add_device failed!\n"); + retval = PTR_ERR(plat_ci); + goto disable_device; } - retval = platform_device_add_data(plat_ci, platdata, sizeof(*platdata)); - if (retval) - goto put_platform; - - dma_set_coherent_mask(&plat_ci->dev, pdev->dev.coherent_dma_mask); - plat_ci->dev.dma_mask = pdev->dev.dma_mask; - plat_ci->dev.dma_parms = pdev->dev.dma_parms; - plat_ci->dev.parent = &pdev->dev; - pci_set_drvdata(pdev, plat_ci); - retval = platform_device_add(plat_ci); - if (retval) - goto put_platform; - return 0; - put_platform: - pci_set_drvdata(pdev, NULL); - platform_device_put(plat_ci); disable_device: pci_disable_device(pdev); done: @@ -133,7 +111,7 @@ static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev) { struct platform_device *plat_ci = pci_get_drvdata(pdev); - platform_device_unregister(plat_ci); + ci13xxx_remove_device(plat_ci); pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); } diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 9a883bd..8b9d06f 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -332,6 +332,49 @@ static irqreturn_t ci_irq(int irq, void *data) return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci); } +struct platform_device *ci13xxx_add_device(struct device *dev, + struct resource *res, int nres, + struct ci13xxx_platform_data *platdata) +{ + struct platform_device *pdev; + int ret; + + /* FIXME: find a way to choose id */ + pdev = platform_device_alloc("ci_hdrc", -1); + if (!pdev) + return ERR_PTR(-ENOMEM); + + pdev->dev.parent = dev; + pdev->dev.dma_mask = dev->dma_mask; + pdev->dev.dma_parms = dev->dma_parms; + dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask); + + ret = platform_device_add_resources(pdev, res, nres); + if (ret) + goto err; + + ret = platform_device_add_data(pdev, platdata, sizeof(*platdata)); + if (ret) + goto err; + + ret = platform_device_add(pdev); + if (ret) + goto err; + + return pdev; + +err: + platform_device_put(pdev); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(ci13xxx_add_device); + +void ci13xxx_remove_device(struct platform_device *pdev) +{ + platform_device_unregister(pdev); +} +EXPORT_SYMBOL_GPL(ci13xxx_remove_device); + static int __devinit ci_hdrc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index d2f7e49..be078f0 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -25,4 +25,11 @@ struct ci13xxx_platform_data { /* Default offset of capability registers */ #define DEF_CAPOFFSET 0x100 +/* Add ci13xxx device */ +struct platform_device *ci13xxx_add_device(struct device *dev, + struct resource *res, int nres, + struct ci13xxx_platform_data *platdata); +/* Remove ci13xxx device */ +void ci13xxx_remove_device(struct platform_device *pdev); + #endif -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 3/9] USB: Chipidea: add ci13xxx device id management 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ We use ida_simple_get and ida_simple_remove to manage the ids. Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> --- drivers/usb/chipidea/core.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 8b9d06f..39603d7 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -56,6 +56,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/idr.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> @@ -332,17 +333,24 @@ static irqreturn_t ci_irq(int irq, void *data) return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci); } +static DEFINE_IDA(ci_ida); + struct platform_device *ci13xxx_add_device(struct device *dev, struct resource *res, int nres, struct ci13xxx_platform_data *platdata) { struct platform_device *pdev; - int ret; + int id, ret; - /* FIXME: find a way to choose id */ - pdev = platform_device_alloc("ci_hdrc", -1); - if (!pdev) - return ERR_PTR(-ENOMEM); + id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); + if (id < 0) + return ERR_PTR(id); + + pdev = platform_device_alloc("ci_hdrc", id); + if (!pdev) { + ret = -ENOMEM; + goto put_id; + } pdev->dev.parent = dev; pdev->dev.dma_mask = dev->dma_mask; @@ -365,6 +373,8 @@ struct platform_device *ci13xxx_add_device(struct device *dev, err: platform_device_put(pdev); +put_id: + ida_simple_remove(&ci_ida, id); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(ci13xxx_add_device); @@ -372,6 +382,7 @@ EXPORT_SYMBOL_GPL(ci13xxx_add_device); void ci13xxx_remove_device(struct platform_device *pdev) { platform_device_unregister(pdev); + ida_simple_remove(&ci_ida, pdev->id); } EXPORT_SYMBOL_GPL(ci13xxx_remove_device); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 3/9] USB: Chipidea: add ci13xxx device id management @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel We use ida_simple_get and ida_simple_remove to manage the ids. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> --- drivers/usb/chipidea/core.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 8b9d06f..39603d7 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -56,6 +56,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/module.h> +#include <linux/idr.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> @@ -332,17 +333,24 @@ static irqreturn_t ci_irq(int irq, void *data) return ci->role == CI_ROLE_END ? ret : ci_role(ci)->irq(ci); } +static DEFINE_IDA(ci_ida); + struct platform_device *ci13xxx_add_device(struct device *dev, struct resource *res, int nres, struct ci13xxx_platform_data *platdata) { struct platform_device *pdev; - int ret; + int id, ret; - /* FIXME: find a way to choose id */ - pdev = platform_device_alloc("ci_hdrc", -1); - if (!pdev) - return ERR_PTR(-ENOMEM); + id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL); + if (id < 0) + return ERR_PTR(id); + + pdev = platform_device_alloc("ci_hdrc", id); + if (!pdev) { + ret = -ENOMEM; + goto put_id; + } pdev->dev.parent = dev; pdev->dev.dma_mask = dev->dma_mask; @@ -365,6 +373,8 @@ struct platform_device *ci13xxx_add_device(struct device *dev, err: platform_device_put(pdev); +put_id: + ida_simple_remove(&ci_ida, id); return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(ci13xxx_add_device); @@ -372,6 +382,7 @@ EXPORT_SYMBOL_GPL(ci13xxx_add_device); void ci13xxx_remove_device(struct platform_device *pdev) { platform_device_unregister(pdev); + ida_simple_remove(&ci_ida, pdev->id); } EXPORT_SYMBOL_GPL(ci13xxx_remove_device); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 4/9] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ ci13xxx host needs Root Hub Transaction Translators. Reported-by: Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Signed-off-by: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> Acked-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> --- drivers/usb/chipidea/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index fd36dc8..8337fb5 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" + select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the ChipIdea driver. -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 4/9] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel ci13xxx host needs Root Hub Transaction Translators. Reported-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Marek Vasut <marex@denx.de> --- drivers/usb/chipidea/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index fd36dc8..8337fb5 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -20,6 +20,7 @@ config USB_CHIPIDEA_UDC config USB_CHIPIDEA_HOST bool "ChipIdea host controller" + select USB_EHCI_ROOT_HUB_TT help Say Y here to enable host controller functionality of the ChipIdea driver. -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 5/9] usb: otg: add notify_connect/notify_disconnect callback 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ This let usb phy driver has a chance to change hw settings when connect status change. Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> --- include/linux/usb/otg.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 0cb2ec2..45824be 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -128,6 +128,9 @@ struct usb_phy { int (*set_suspend)(struct usb_phy *x, int suspend); + /* notify phy connect status change */ + int (*notify_connect)(struct usb_phy *x, int port); + int (*notify_disconnect)(struct usb_phy *x, int port); }; @@ -277,6 +280,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int +usb_phy_notify_connect(struct usb_phy *x, int port) +{ + if (x->notify_connect) + return x->notify_connect(x, port); + else + return 0; +} + +static inline int +usb_phy_notify_disconnect(struct usb_phy *x, int port) +{ + if (x->notify_disconnect) + return x->notify_disconnect(x, port); + else + return 0; +} + +static inline int otg_start_srp(struct usb_otg *otg) { if (otg && otg->start_srp) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 5/9] usb: otg: add notify_connect/notify_disconnect callback @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel This let usb phy driver has a chance to change hw settings when connect status change. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> --- include/linux/usb/otg.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 0cb2ec2..45824be 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -128,6 +128,9 @@ struct usb_phy { int (*set_suspend)(struct usb_phy *x, int suspend); + /* notify phy connect status change */ + int (*notify_connect)(struct usb_phy *x, int port); + int (*notify_disconnect)(struct usb_phy *x, int port); }; @@ -277,6 +280,24 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int +usb_phy_notify_connect(struct usb_phy *x, int port) +{ + if (x->notify_connect) + return x->notify_connect(x, port); + else + return 0; +} + +static inline int +usb_phy_notify_disconnect(struct usb_phy *x, int port) +{ + if (x->notify_disconnect) + return x->notify_disconnect(x, port); + else + return 0; +} + +static inline int otg_start_srp(struct usb_otg *otg) { if (otg && otg->start_srp) -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ Phy may need to change settings when port connect change. Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> --- drivers/usb/core/hub.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4cc8dc9..2ba9d84 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -20,6 +20,7 @@ #include <linux/usb.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> +#include <linux/usb/otg.h> #include <linux/usb/quirks.h> #include <linux/kthread.h> #include <linux/mutex.h> @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } + if (unlikely(hcd->phy && !hdev->parent)) { + if (portstatus & USB_PORT_STAT_CONNECTION) + usb_phy_notify_connect(hcd->phy, port1); + else + usb_phy_notify_disconnect(hcd->phy, port1); + } + /* Return now if debouncing failed or nothing is connected or * the device was "removed". */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel Phy may need to change settings when port connect change. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> --- drivers/usb/core/hub.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 4cc8dc9..2ba9d84 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -20,6 +20,7 @@ #include <linux/usb.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> +#include <linux/usb/otg.h> #include <linux/usb/quirks.h> #include <linux/kthread.h> #include <linux/mutex.h> @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, } } + if (unlikely(hcd->phy && !hdev->parent)) { + if (portstatus & USB_PORT_STAT_CONNECTION) + usb_phy_notify_connect(hcd->phy, port1); + else + usb_phy_notify_disconnect(hcd->phy, port1); + } + /* Return now if debouncing failed or nothing is connected or * the device was "removed". */ -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
[parent not found: <1341673008-29808-7-git-send-email-richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>]
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-07 14:56 ` Richard Zhao @ 2012-07-09 16:57 ` Greg KH -1 siblings, 0 replies; 44+ messages in thread From: Greg KH @ 2012-07-09 16:57 UTC (permalink / raw) To: Richard Zhao Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > Phy may need to change settings when port connect change. > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> > --- > drivers/usb/core/hub.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 4cc8dc9..2ba9d84 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -20,6 +20,7 @@ > #include <linux/usb.h> > #include <linux/usbdevice_fs.h> > #include <linux/usb/hcd.h> > +#include <linux/usb/otg.h> > #include <linux/usb/quirks.h> > #include <linux/kthread.h> > #include <linux/mutex.h> > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > } > } > > + if (unlikely(hcd->phy && !hdev->parent)) { Why is this "unlikely"? And why mark it as such, is this a "fast path" that needs the compiler to know this hint to optimize things here? Please don't use likely() or unlikely() except in places it really is needed, _and_ you have measured the difference. Have you done so in this place? thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-09 16:57 ` Greg KH 0 siblings, 0 replies; 44+ messages in thread From: Greg KH @ 2012-07-09 16:57 UTC (permalink / raw) To: linux-arm-kernel On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > Phy may need to change settings when port connect change. > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com> > Tested-by: Subodh Nijsure <snijsure@grid-net.com> > --- > drivers/usb/core/hub.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 4cc8dc9..2ba9d84 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -20,6 +20,7 @@ > #include <linux/usb.h> > #include <linux/usbdevice_fs.h> > #include <linux/usb/hcd.h> > +#include <linux/usb/otg.h> > #include <linux/usb/quirks.h> > #include <linux/kthread.h> > #include <linux/mutex.h> > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > } > } > > + if (unlikely(hcd->phy && !hdev->parent)) { Why is this "unlikely"? And why mark it as such, is this a "fast path" that needs the compiler to know this hint to optimize things here? Please don't use likely() or unlikely() except in places it really is needed, _and_ you have measured the difference. Have you done so in this place? thanks, greg k-h ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <20120709165757.GA6024-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-09 16:57 ` Greg KH @ 2012-07-10 1:44 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-10 1:44 UTC (permalink / raw) To: Greg KH Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ On Mon, Jul 09, 2012 at 09:57:57AM -0700, Greg KH wrote: > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > Phy may need to change settings when port connect change. > > > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > > Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> > > --- > > drivers/usb/core/hub.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > index 4cc8dc9..2ba9d84 100644 > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -20,6 +20,7 @@ > > #include <linux/usb.h> > > #include <linux/usbdevice_fs.h> > > #include <linux/usb/hcd.h> > > +#include <linux/usb/otg.h> > > #include <linux/usb/quirks.h> > > #include <linux/kthread.h> > > #include <linux/mutex.h> > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > } > > } > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > Why is this "unlikely"? And why mark it as such, is this a "fast path" > that needs the compiler to know this hint to optimize things here? > > Please don't use likely() or unlikely() except in places it really is > needed, _and_ you have measured the difference. Have you done so in > this place? It's from a comment by Alan Stern. http://www.spinics.net/lists/linux-usb/msg64987.html Actually, for my board, it's not unlikely. But for others which don't have notify_connect/disconnect, it's unlikely. Because it's not unlikely for all boards, I prefer remove "unlikely". Thanks Richard > > thanks, > > greg k-h > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-10 1:44 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-10 1:44 UTC (permalink / raw) To: linux-arm-kernel On Mon, Jul 09, 2012 at 09:57:57AM -0700, Greg KH wrote: > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > Phy may need to change settings when port connect change. > > > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com> > > Tested-by: Subodh Nijsure <snijsure@grid-net.com> > > --- > > drivers/usb/core/hub.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > index 4cc8dc9..2ba9d84 100644 > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -20,6 +20,7 @@ > > #include <linux/usb.h> > > #include <linux/usbdevice_fs.h> > > #include <linux/usb/hcd.h> > > +#include <linux/usb/otg.h> > > #include <linux/usb/quirks.h> > > #include <linux/kthread.h> > > #include <linux/mutex.h> > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > } > > } > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > Why is this "unlikely"? And why mark it as such, is this a "fast path" > that needs the compiler to know this hint to optimize things here? > > Please don't use likely() or unlikely() except in places it really is > needed, _and_ you have measured the difference. Have you done so in > this place? It's from a comment by Alan Stern. http://www.spinics.net/lists/linux-usb/msg64987.html Actually, for my board, it's not unlikely. But for others which don't have notify_connect/disconnect, it's unlikely. Because it's not unlikely for all boards, I prefer remove "unlikely". Thanks Richard > > thanks, > > greg k-h > ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <20120710014450.GF26888-iWYTGMXpHj9ITqJhDdzsOjpauB2SiJktrE5yTffgRl4@public.gmane.org>]
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-10 1:44 ` Richard Zhao @ 2012-07-10 14:24 ` Alan Stern -1 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2012-07-10 14:24 UTC (permalink / raw) To: Richard Zhao Cc: Greg KH, linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ On Tue, 10 Jul 2012, Richard Zhao wrote: > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > > } > > > } > > > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > > > Why is this "unlikely"? And why mark it as such, is this a "fast path" > > that needs the compiler to know this hint to optimize things here? > > > > Please don't use likely() or unlikely() except in places it really is > > needed, _and_ you have measured the difference. Have you done so in > > this place? > It's from a comment by Alan Stern. > http://www.spinics.net/lists/linux-usb/msg64987.html That comment was made in a somewhat different context. At the time the code was part of an interrupt handler; now it isn't. > Actually, for my board, it's not unlikely. But for others which don't > have notify_connect/disconnect, it's unlikely. > > Because it's not unlikely for all boards, I prefer remove "unlikely". It's no longer a big deal one way or another. I don't care about the "unlikely" because it's on a cold path running in process context. Go ahead and remove it. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-10 14:24 ` Alan Stern 0 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2012-07-10 14:24 UTC (permalink / raw) To: linux-arm-kernel On Tue, 10 Jul 2012, Richard Zhao wrote: > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > > } > > > } > > > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > > > Why is this "unlikely"? And why mark it as such, is this a "fast path" > > that needs the compiler to know this hint to optimize things here? > > > > Please don't use likely() or unlikely() except in places it really is > > needed, _and_ you have measured the difference. Have you done so in > > this place? > It's from a comment by Alan Stern. > http://www.spinics.net/lists/linux-usb/msg64987.html That comment was made in a somewhat different context. At the time the code was part of an interrupt handler; now it isn't. > Actually, for my board, it's not unlikely. But for others which don't > have notify_connect/disconnect, it's unlikely. > > Because it's not unlikely for all boards, I prefer remove "unlikely". It's no longer a big deal one way or another. I don't care about the "unlikely" because it's on a cold path running in process context. Go ahead and remove it. Alan Stern ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <Pine.LNX.4.44L0.1207101021580.1308-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>]
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-10 14:24 ` Alan Stern @ 2012-07-10 14:53 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-10 14:53 UTC (permalink / raw) To: Alan Stern Cc: Richard Zhao, Greg KH, linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ On Tue, Jul 10, 2012 at 10:24:07AM -0400, Alan Stern wrote: > On Tue, 10 Jul 2012, Richard Zhao wrote: > > > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > > > } > > > > } > > > > > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > > > > > Why is this "unlikely"? And why mark it as such, is this a "fast path" > > > that needs the compiler to know this hint to optimize things here? > > > > > > Please don't use likely() or unlikely() except in places it really is > > > needed, _and_ you have measured the difference. Have you done so in > > > this place? > > It's from a comment by Alan Stern. > > http://www.spinics.net/lists/linux-usb/msg64987.html > > That comment was made in a somewhat different context. At the time > the code was part of an interrupt handler; now it isn't. > > > Actually, for my board, it's not unlikely. But for others which don't > > have notify_connect/disconnect, it's unlikely. > > > > Because it's not unlikely for all boards, I prefer remove "unlikely". > > It's no longer a big deal one way or another. I don't care about the > "unlikely" because it's on a cold path running in process context. Go > ahead and remove it. Ok. I'll remove it. Thanks Richard > > Alan Stern > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-10 14:53 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-10 14:53 UTC (permalink / raw) To: linux-arm-kernel On Tue, Jul 10, 2012 at 10:24:07AM -0400, Alan Stern wrote: > On Tue, 10 Jul 2012, Richard Zhao wrote: > > > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > > > } > > > > } > > > > > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > > > > > Why is this "unlikely"? And why mark it as such, is this a "fast path" > > > that needs the compiler to know this hint to optimize things here? > > > > > > Please don't use likely() or unlikely() except in places it really is > > > needed, _and_ you have measured the difference. Have you done so in > > > this place? > > It's from a comment by Alan Stern. > > http://www.spinics.net/lists/linux-usb/msg64987.html > > That comment was made in a somewhat different context. At the time > the code was part of an interrupt handler; now it isn't. > > > Actually, for my board, it's not unlikely. But for others which don't > > have notify_connect/disconnect, it's unlikely. > > > > Because it's not unlikely for all boards, I prefer remove "unlikely". > > It's no longer a big deal one way or another. I don't care about the > "unlikely" because it's on a cold path running in process context. Go > ahead and remove it. Ok. I'll remove it. Thanks Richard > > Alan Stern > ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-07 14:56 ` Richard Zhao @ 2012-07-10 3:14 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-10 3:14 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > Phy may need to change settings when port connect change. > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> > --- > drivers/usb/core/hub.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 4cc8dc9..2ba9d84 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -20,6 +20,7 @@ > #include <linux/usb.h> > #include <linux/usbdevice_fs.h> > #include <linux/usb/hcd.h> > +#include <linux/usb/otg.h> > #include <linux/usb/quirks.h> > #include <linux/kthread.h> > #include <linux/mutex.h> > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > } > } > > + if (unlikely(hcd->phy && !hdev->parent)) { > + if (portstatus & USB_PORT_STAT_CONNECTION) > + usb_phy_notify_connect(hcd->phy, port1); > + else > + usb_phy_notify_disconnect(hcd->phy, port1); There's another issue. When hcd is removed, notify disconnect is not called. Is it ok, if I remove the above two line and add below patch: --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) */ device_del(&udev->dev); + if (udev->parent && !udev->parent->parent) { + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + usb_phy_notify_disconnect(hcd->phy, udev->portnum); + } + /* Free the device number and delete the parent's children[] * (or root_hub) pointer. */ Thanks Richard -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-10 3:14 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-10 3:14 UTC (permalink / raw) To: linux-arm-kernel On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > Phy may need to change settings when port connect change. > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com> > Tested-by: Subodh Nijsure <snijsure@grid-net.com> > --- > drivers/usb/core/hub.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 4cc8dc9..2ba9d84 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -20,6 +20,7 @@ > #include <linux/usb.h> > #include <linux/usbdevice_fs.h> > #include <linux/usb/hcd.h> > +#include <linux/usb/otg.h> > #include <linux/usb/quirks.h> > #include <linux/kthread.h> > #include <linux/mutex.h> > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > } > } > > + if (unlikely(hcd->phy && !hdev->parent)) { > + if (portstatus & USB_PORT_STAT_CONNECTION) > + usb_phy_notify_connect(hcd->phy, port1); > + else > + usb_phy_notify_disconnect(hcd->phy, port1); There's another issue. When hcd is removed, notify disconnect is not called. Is it ok, if I remove the above two line and add below patch: --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) */ device_del(&udev->dev); + if (udev->parent && !udev->parent->parent) { + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + usb_phy_notify_disconnect(hcd->phy, udev->portnum); + } + /* Free the device number and delete the parent's children[] * (or root_hub) pointer. */ Thanks Richard ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <20120710031426.GG26888-iWYTGMXpHj9ITqJhDdzsOjpauB2SiJktrE5yTffgRl4@public.gmane.org>]
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-10 3:14 ` Richard Zhao @ 2012-07-10 3:22 ` Marek Vasut -1 siblings, 0 replies; 44+ messages in thread From: Marek Vasut @ 2012-07-10 3:22 UTC (permalink / raw) To: Richard Zhao Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ Dear Richard Zhao, > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > Phy may need to change settings when port connect change. > > > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > > Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> > > --- > > > > drivers/usb/core/hub.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > index 4cc8dc9..2ba9d84 100644 > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -20,6 +20,7 @@ > > > > #include <linux/usb.h> > > #include <linux/usbdevice_fs.h> > > #include <linux/usb/hcd.h> > > > > +#include <linux/usb/otg.h> > > > > #include <linux/usb/quirks.h> > > #include <linux/kthread.h> > > #include <linux/mutex.h> > > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub > > *hub, int port1, > > > > } > > > > } > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > + if (portstatus & USB_PORT_STAT_CONNECTION) > > + usb_phy_notify_connect(hcd->phy, port1); > > + else > > + usb_phy_notify_disconnect(hcd->phy, port1); > > There's another issue. When hcd is removed, notify disconnect is not > called. Is it ok, if I remove the above two line and add below patch: > > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > */ > device_del(&udev->dev); > > + if (udev->parent && !udev->parent->parent) { > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > + } Shouldn't that go before device_del() ? > + > /* Free the device number and delete the parent's children[] > * (or root_hub) pointer. > */ > > > Thanks > Richard Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-10 3:22 ` Marek Vasut 0 siblings, 0 replies; 44+ messages in thread From: Marek Vasut @ 2012-07-10 3:22 UTC (permalink / raw) To: linux-arm-kernel Dear Richard Zhao, > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > Phy may need to change settings when port connect change. > > > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com> > > Tested-by: Subodh Nijsure <snijsure@grid-net.com> > > --- > > > > drivers/usb/core/hub.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > index 4cc8dc9..2ba9d84 100644 > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -20,6 +20,7 @@ > > > > #include <linux/usb.h> > > #include <linux/usbdevice_fs.h> > > #include <linux/usb/hcd.h> > > > > +#include <linux/usb/otg.h> > > > > #include <linux/usb/quirks.h> > > #include <linux/kthread.h> > > #include <linux/mutex.h> > > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub > > *hub, int port1, > > > > } > > > > } > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > + if (portstatus & USB_PORT_STAT_CONNECTION) > > + usb_phy_notify_connect(hcd->phy, port1); > > + else > > + usb_phy_notify_disconnect(hcd->phy, port1); > > There's another issue. When hcd is removed, notify disconnect is not > called. Is it ok, if I remove the above two line and add below patch: > > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > */ > device_del(&udev->dev); > > + if (udev->parent && !udev->parent->parent) { > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > + } Shouldn't that go before device_del() ? > + > /* Free the device number and delete the parent's children[] > * (or root_hub) pointer. > */ > > > Thanks > Richard Best regards, Marek Vasut ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <201207100522.21162.marex-ynQEQJNshbs@public.gmane.org>]
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-10 3:22 ` Marek Vasut @ 2012-07-10 11:20 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-10 11:20 UTC (permalink / raw) To: Marek Vasut Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ On Tue, Jul 10, 2012 at 05:22:20AM +0200, Marek Vasut wrote: > Dear Richard Zhao, > > > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > > Phy may need to change settings when port connect change. > > > > > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > > > Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> > > > --- > > > > > > drivers/usb/core/hub.c | 8 ++++++++ > > > 1 file changed, 8 insertions(+) > > > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > > index 4cc8dc9..2ba9d84 100644 > > > --- a/drivers/usb/core/hub.c > > > +++ b/drivers/usb/core/hub.c > > > @@ -20,6 +20,7 @@ > > > > > > #include <linux/usb.h> > > > #include <linux/usbdevice_fs.h> > > > #include <linux/usb/hcd.h> > > > > > > +#include <linux/usb/otg.h> > > > > > > #include <linux/usb/quirks.h> > > > #include <linux/kthread.h> > > > #include <linux/mutex.h> > > > > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub > > > *hub, int port1, > > > > > > } > > > > > > } > > > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > > + if (portstatus & USB_PORT_STAT_CONNECTION) > > > + usb_phy_notify_connect(hcd->phy, port1); > > > + else > > > + usb_phy_notify_disconnect(hcd->phy, port1); > > > > There's another issue. When hcd is removed, notify disconnect is not > > called. Is it ok, if I remove the above two line and add below patch: > > > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > > */ > > device_del(&udev->dev); > > > > + if (udev->parent && !udev->parent->parent) { > > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > > + } > > Shouldn't that go before device_del() ? Any difference? Thanks Richard > > > + > > /* Free the device number and delete the parent's children[] > > * (or root_hub) pointer. > > */ > > > > > > Thanks > > Richard > > Best regards, > Marek Vasut > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-10 11:20 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-10 11:20 UTC (permalink / raw) To: linux-arm-kernel On Tue, Jul 10, 2012 at 05:22:20AM +0200, Marek Vasut wrote: > Dear Richard Zhao, > > > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > > Phy may need to change settings when port connect change. > > > > > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com> > > > Tested-by: Subodh Nijsure <snijsure@grid-net.com> > > > --- > > > > > > drivers/usb/core/hub.c | 8 ++++++++ > > > 1 file changed, 8 insertions(+) > > > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > > index 4cc8dc9..2ba9d84 100644 > > > --- a/drivers/usb/core/hub.c > > > +++ b/drivers/usb/core/hub.c > > > @@ -20,6 +20,7 @@ > > > > > > #include <linux/usb.h> > > > #include <linux/usbdevice_fs.h> > > > #include <linux/usb/hcd.h> > > > > > > +#include <linux/usb/otg.h> > > > > > > #include <linux/usb/quirks.h> > > > #include <linux/kthread.h> > > > #include <linux/mutex.h> > > > > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub > > > *hub, int port1, > > > > > > } > > > > > > } > > > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > > + if (portstatus & USB_PORT_STAT_CONNECTION) > > > + usb_phy_notify_connect(hcd->phy, port1); > > > + else > > > + usb_phy_notify_disconnect(hcd->phy, port1); > > > > There's another issue. When hcd is removed, notify disconnect is not > > called. Is it ok, if I remove the above two line and add below patch: > > > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > > */ > > device_del(&udev->dev); > > > > + if (udev->parent && !udev->parent->parent) { > > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > > + } > > Shouldn't that go before device_del() ? Any difference? Thanks Richard > > > + > > /* Free the device number and delete the parent's children[] > > * (or root_hub) pointer. > > */ > > > > > > Thanks > > Richard > > Best regards, > Marek Vasut > ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <20120710112050.GH26888-iWYTGMXpHj9ITqJhDdzsOjpauB2SiJktrE5yTffgRl4@public.gmane.org>]
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-10 11:20 ` Richard Zhao @ 2012-07-10 11:38 ` Marek Vasut -1 siblings, 0 replies; 44+ messages in thread From: Marek Vasut @ 2012-07-10 11:38 UTC (permalink / raw) To: Richard Zhao Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ Dear Richard Zhao, [...] > > > --- a/drivers/usb/core/hub.c > > > +++ b/drivers/usb/core/hub.c > > > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > > > > > > */ > > > > > > device_del(&udev->dev); > > > > > > + if (udev->parent && !udev->parent->parent) { > > > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > > > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > > > + } > > > > Shouldn't that go before device_del() ? > > Any difference? I was worried some corruption of other members in udev structure might happen, but I'm not so sure anymore after taking deer look. > Thanks > Richard Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-10 11:38 ` Marek Vasut 0 siblings, 0 replies; 44+ messages in thread From: Marek Vasut @ 2012-07-10 11:38 UTC (permalink / raw) To: linux-arm-kernel Dear Richard Zhao, [...] > > > --- a/drivers/usb/core/hub.c > > > +++ b/drivers/usb/core/hub.c > > > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > > > > > > */ > > > > > > device_del(&udev->dev); > > > > > > + if (udev->parent && !udev->parent->parent) { > > > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > > > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > > > + } > > > > Shouldn't that go before device_del() ? > > Any difference? I was worried some corruption of other members in udev structure might happen, but I'm not so sure anymore after taking deer look. > Thanks > Richard Best regards, Marek Vasut ^ permalink raw reply [flat|nested] 44+ messages in thread
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-10 3:14 ` Richard Zhao @ 2012-07-10 15:07 ` Alan Stern -1 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2012-07-10 15:07 UTC (permalink / raw) To: Richard Zhao Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ On Tue, 10 Jul 2012, Richard Zhao wrote: > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > Phy may need to change settings when port connect change. > > > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > > Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> > > --- > > drivers/usb/core/hub.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > index 4cc8dc9..2ba9d84 100644 > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -20,6 +20,7 @@ > > #include <linux/usb.h> > > #include <linux/usbdevice_fs.h> > > #include <linux/usb/hcd.h> > > +#include <linux/usb/otg.h> > > #include <linux/usb/quirks.h> > > #include <linux/kthread.h> > > #include <linux/mutex.h> > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > } > > } > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > + if (portstatus & USB_PORT_STAT_CONNECTION) > > + usb_phy_notify_connect(hcd->phy, port1); > > + else > > + usb_phy_notify_disconnect(hcd->phy, port1); > There's another issue. When hcd is removed, notify disconnect is not > called. Is it ok, if I remove the above two line and add below patch: You should keep those two lines, since it's possible for a disconnect to occur without usb_disconnect() being called. This happens when a device fails to enumerate. > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > */ > device_del(&udev->dev); > > + if (udev->parent && !udev->parent->parent) { > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > + } You might not want to add this. usb_disconnect() can get called in situations where the device remains physically connected (if the firmware changes during a reset, for example). If you want to notify the phy when the root hub is removed, there are better places to do it. One possibility is in hub_quiesce(), another is in usb_remove_hcd(). Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-10 15:07 ` Alan Stern 0 siblings, 0 replies; 44+ messages in thread From: Alan Stern @ 2012-07-10 15:07 UTC (permalink / raw) To: linux-arm-kernel On Tue, 10 Jul 2012, Richard Zhao wrote: > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > Phy may need to change settings when port connect change. > > > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com> > > Tested-by: Subodh Nijsure <snijsure@grid-net.com> > > --- > > drivers/usb/core/hub.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > index 4cc8dc9..2ba9d84 100644 > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -20,6 +20,7 @@ > > #include <linux/usb.h> > > #include <linux/usbdevice_fs.h> > > #include <linux/usb/hcd.h> > > +#include <linux/usb/otg.h> > > #include <linux/usb/quirks.h> > > #include <linux/kthread.h> > > #include <linux/mutex.h> > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > } > > } > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > + if (portstatus & USB_PORT_STAT_CONNECTION) > > + usb_phy_notify_connect(hcd->phy, port1); > > + else > > + usb_phy_notify_disconnect(hcd->phy, port1); > There's another issue. When hcd is removed, notify disconnect is not > called. Is it ok, if I remove the above two line and add below patch: You should keep those two lines, since it's possible for a disconnect to occur without usb_disconnect() being called. This happens when a device fails to enumerate. > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > */ > device_del(&udev->dev); > > + if (udev->parent && !udev->parent->parent) { > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > + } You might not want to add this. usb_disconnect() can get called in situations where the device remains physically connected (if the firmware changes during a reset, for example). If you want to notify the phy when the root hub is removed, there are better places to do it. One possibility is in hub_quiesce(), another is in usb_remove_hcd(). Alan Stern ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <Pine.LNX.4.44L0.1207101024110.1308-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>]
* Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change 2012-07-10 15:07 ` Alan Stern @ 2012-07-11 2:53 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-11 2:53 UTC (permalink / raw) To: Alan Stern Cc: marex-ynQEQJNshbs, B20596-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, B29397-KZfg59tc24xl57MIdRCFDg, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, linux-usb-u79uwXL29TY76Z2rM5mHXA, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w On Tue, Jul 10, 2012 at 11:07:14AM -0400, Alan Stern wrote: > On Tue, 10 Jul 2012, Richard Zhao wrote: > > > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > > Phy may need to change settings when port connect change. > > > > > > Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> > > > Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> > > > --- > > > drivers/usb/core/hub.c | 8 ++++++++ > > > 1 file changed, 8 insertions(+) > > > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > > index 4cc8dc9..2ba9d84 100644 > > > --- a/drivers/usb/core/hub.c > > > +++ b/drivers/usb/core/hub.c > > > @@ -20,6 +20,7 @@ > > > #include <linux/usb.h> > > > #include <linux/usbdevice_fs.h> > > > #include <linux/usb/hcd.h> > > > +#include <linux/usb/otg.h> > > > #include <linux/usb/quirks.h> > > > #include <linux/kthread.h> > > > #include <linux/mutex.h> > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > > } > > > } > > > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > > + if (portstatus & USB_PORT_STAT_CONNECTION) > > > + usb_phy_notify_connect(hcd->phy, port1); > > > + else > > > + usb_phy_notify_disconnect(hcd->phy, port1); > > There's another issue. When hcd is removed, notify disconnect is not > > called. Is it ok, if I remove the above two line and add below patch: > > You should keep those two lines, since it's possible for a disconnect > to occur without usb_disconnect() being called. This happens when a > device fails to enumerate. > > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > > */ > > device_del(&udev->dev); > > > > + if (udev->parent && !udev->parent->parent) { > > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > > + } > > You might not want to add this. usb_disconnect() can get called in > situations where the device remains physically connected (if the > firmware changes during a reset, for example). > > If you want to notify the phy when the root hub is removed, there are > better places to do it. One possibility is in hub_quiesce(), another > is in usb_remove_hcd(). Thanks. I'll need more testing, and won't add it in this patch. Richard > > Alan Stern > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change @ 2012-07-11 2:53 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-11 2:53 UTC (permalink / raw) To: linux-arm-kernel On Tue, Jul 10, 2012 at 11:07:14AM -0400, Alan Stern wrote: > On Tue, 10 Jul 2012, Richard Zhao wrote: > > > On Sat, Jul 07, 2012 at 10:56:45PM +0800, Richard Zhao wrote: > > > Phy may need to change settings when port connect change. > > > > > > Signed-off-by: Richard Zhao <richard.zhao@freescale.com> > > > Tested-by: Subodh Nijsure <snijsure@grid-net.com> > > > --- > > > drivers/usb/core/hub.c | 8 ++++++++ > > > 1 file changed, 8 insertions(+) > > > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > > index 4cc8dc9..2ba9d84 100644 > > > --- a/drivers/usb/core/hub.c > > > +++ b/drivers/usb/core/hub.c > > > @@ -20,6 +20,7 @@ > > > #include <linux/usb.h> > > > #include <linux/usbdevice_fs.h> > > > #include <linux/usb/hcd.h> > > > +#include <linux/usb/otg.h> > > > #include <linux/usb/quirks.h> > > > #include <linux/kthread.h> > > > #include <linux/mutex.h> > > > @@ -4037,6 +4038,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, > > > } > > > } > > > > > > + if (unlikely(hcd->phy && !hdev->parent)) { > > > + if (portstatus & USB_PORT_STAT_CONNECTION) > > > + usb_phy_notify_connect(hcd->phy, port1); > > > + else > > > + usb_phy_notify_disconnect(hcd->phy, port1); > > There's another issue. When hcd is removed, notify disconnect is not > > called. Is it ok, if I remove the above two line and add below patch: > > You should keep those two lines, since it's possible for a disconnect > to occur without usb_disconnect() being called. This happens when a > device fails to enumerate. > > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -1924,6 +1924,11 @@ void usb_disconnect(struct usb_device **pdev) > > */ > > device_del(&udev->dev); > > > > + if (udev->parent && !udev->parent->parent) { > > + struct usb_hcd *hcd = bus_to_hcd(udev->bus); > > + usb_phy_notify_disconnect(hcd->phy, udev->portnum); > > + } > > You might not want to add this. usb_disconnect() can get called in > situations where the device remains physically connected (if the > firmware changes during a reset, for example). > > If you want to notify the phy when the root hub is removed, there are > better places to do it. One possibility is in hub_quiesce(), another > is in usb_remove_hcd(). Thanks. I'll need more testing, and won't add it in this patch. Richard > > Alan Stern > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 7/9] usb: chipidea: permit driver bindings pass phy pointer 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ Sometimes, the driver bindings may know what phy they use. For example, when using device tree, the usb controller may have a phandler pointing to usb phy. Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Reviewed-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> --- drivers/usb/chipidea/ci.h | 2 ++ drivers/usb/chipidea/core.c | 4 ++++ drivers/usb/chipidea/host.c | 1 + drivers/usb/chipidea/udc.c | 11 +++++++---- include/linux/usb/chipidea.h | 3 +++ 5 files changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 9655e35..d738603 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -160,6 +160,8 @@ struct ci13xxx { struct ci13xxx_platform_data *platdata; int vbus_active; + /* FIXME: some day, we'll not use global phy */ + bool global_phy; struct usb_phy *transceiver; struct usb_hcd *hcd; }; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 39603d7..1083585 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -419,6 +419,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev) ci->dev = dev; ci->platdata = dev->platform_data; + if (ci->platdata->phy) + ci->transceiver = ci->platdata->phy; + else + ci->global_phy = true; ret = hw_device_init(ci, base); if (ret < 0) { diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 4a4fdb8..ebff9f4 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -117,6 +117,7 @@ static int host_start(struct ci13xxx *ci) hcd->has_tt = 1; hcd->power_budget = ci->platdata->power_budget; + hcd->phy = ci->transceiver; ehci = hcd_to_ehci(hcd); ehci->caps = ci->hw_bank.cap; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index ba8284e..c7a032a 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1685,7 +1685,8 @@ static int udc_start(struct ci13xxx *ci) ci->gadget.ep0 = &ci->ep0in->ep; - ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (ci->global_phy) + ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (ci->transceiver == NULL) { @@ -1729,7 +1730,8 @@ static int udc_start(struct ci13xxx *ci) remove_trans: if (!IS_ERR_OR_NULL(ci->transceiver)) { otg_set_peripheral(ci->transceiver->otg, &ci->gadget); - usb_put_phy(ci->transceiver); + if (ci->global_phy) + usb_put_phy(ci->transceiver); } dev_err(dev, "error = %i\n", retval); @@ -1738,7 +1740,7 @@ remove_dbg: unreg_device: device_unregister(&ci->gadget.dev); put_transceiver: - if (!IS_ERR_OR_NULL(ci->transceiver)) + if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) usb_put_phy(ci->transceiver); free_pools: dma_pool_destroy(ci->td_pool); @@ -1772,7 +1774,8 @@ static void udc_stop(struct ci13xxx *ci) if (!IS_ERR_OR_NULL(ci->transceiver)) { otg_set_peripheral(ci->transceiver->otg, NULL); - usb_put_phy(ci->transceiver); + if (ci->global_phy) + usb_put_phy(ci->transceiver); } dbg_remove_files(&ci->gadget.dev); device_unregister(&ci->gadget.dev); diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index be078f0..544825d 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -5,12 +5,15 @@ #ifndef __LINUX_USB_CHIPIDEA_H #define __LINUX_USB_CHIPIDEA_H +#include <linux/usb/otg.h> + struct ci13xxx; struct ci13xxx_platform_data { const char *name; /* offset of the capability registers */ uintptr_t capoffset; unsigned power_budget; + struct usb_phy *phy; unsigned long flags; #define CI13XXX_REGS_SHARED BIT(0) #define CI13XXX_REQUIRE_TRANSCEIVER BIT(1) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 7/9] usb: chipidea: permit driver bindings pass phy pointer @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel Sometimes, the driver bindings may know what phy they use. For example, when using device tree, the usb controller may have a phandler pointing to usb phy. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> --- drivers/usb/chipidea/ci.h | 2 ++ drivers/usb/chipidea/core.c | 4 ++++ drivers/usb/chipidea/host.c | 1 + drivers/usb/chipidea/udc.c | 11 +++++++---- include/linux/usb/chipidea.h | 3 +++ 5 files changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 9655e35..d738603 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -160,6 +160,8 @@ struct ci13xxx { struct ci13xxx_platform_data *platdata; int vbus_active; + /* FIXME: some day, we'll not use global phy */ + bool global_phy; struct usb_phy *transceiver; struct usb_hcd *hcd; }; diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 39603d7..1083585 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -419,6 +419,10 @@ static int __devinit ci_hdrc_probe(struct platform_device *pdev) ci->dev = dev; ci->platdata = dev->platform_data; + if (ci->platdata->phy) + ci->transceiver = ci->platdata->phy; + else + ci->global_phy = true; ret = hw_device_init(ci, base); if (ret < 0) { diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 4a4fdb8..ebff9f4 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -117,6 +117,7 @@ static int host_start(struct ci13xxx *ci) hcd->has_tt = 1; hcd->power_budget = ci->platdata->power_budget; + hcd->phy = ci->transceiver; ehci = hcd_to_ehci(hcd); ehci->caps = ci->hw_bank.cap; diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index ba8284e..c7a032a 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1685,7 +1685,8 @@ static int udc_start(struct ci13xxx *ci) ci->gadget.ep0 = &ci->ep0in->ep; - ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (ci->global_phy) + ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (ci->transceiver == NULL) { @@ -1729,7 +1730,8 @@ static int udc_start(struct ci13xxx *ci) remove_trans: if (!IS_ERR_OR_NULL(ci->transceiver)) { otg_set_peripheral(ci->transceiver->otg, &ci->gadget); - usb_put_phy(ci->transceiver); + if (ci->global_phy) + usb_put_phy(ci->transceiver); } dev_err(dev, "error = %i\n", retval); @@ -1738,7 +1740,7 @@ remove_dbg: unreg_device: device_unregister(&ci->gadget.dev); put_transceiver: - if (!IS_ERR_OR_NULL(ci->transceiver)) + if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) usb_put_phy(ci->transceiver); free_pools: dma_pool_destroy(ci->td_pool); @@ -1772,7 +1774,8 @@ static void udc_stop(struct ci13xxx *ci) if (!IS_ERR_OR_NULL(ci->transceiver)) { otg_set_peripheral(ci->transceiver->otg, NULL); - usb_put_phy(ci->transceiver); + if (ci->global_phy) + usb_put_phy(ci->transceiver); } dbg_remove_files(&ci->gadget.dev); device_unregister(&ci->gadget.dev); diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index be078f0..544825d 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -5,12 +5,15 @@ #ifndef __LINUX_USB_CHIPIDEA_H #define __LINUX_USB_CHIPIDEA_H +#include <linux/usb/otg.h> + struct ci13xxx; struct ci13xxx_platform_data { const char *name; /* offset of the capability registers */ uintptr_t capoffset; unsigned power_budget; + struct usb_phy *phy; unsigned long flags; #define CI13XXX_REGS_SHARED BIT(0) #define CI13XXX_REQUIRE_TRANSCEIVER BIT(1) -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 8/9] usb: otg: add basic mxs phy driver support 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ, Peter Chen mxs phy is used in Freescale i.MX SoCs, for example imx23, imx28, imx6Q. This patch adds the basic host support. Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> Cc: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Acked-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> --- Documentation/devicetree/bindings/usb/mxs-phy.txt | 13 ++ drivers/usb/otg/Kconfig | 10 ++ drivers/usb/otg/Makefile | 1 + drivers/usb/otg/mxs-phy.c | 186 +++++++++++++++++++++ 4 files changed, 210 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt create mode 100644 drivers/usb/otg/mxs-phy.c diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt new file mode 100644 index 0000000..5835b27 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt @@ -0,0 +1,13 @@ +* Freescale MXS USB Phy Device + +Required properties: +- compatible: Should be "fsl,imx23-usbphy" +- reg: Should contain registers location and length +- interrupts: Should contain phy interrupt + +Example: +usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <0 44 0x04>; +}; diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 5c87db0..13fd1ddf 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -116,6 +116,16 @@ config FSL_USB2_OTG help Enable this to support Freescale USB OTG transceiver. +config USB_MXS_PHY + tristate "Freescale MXS USB PHY support" + depends on ARCH_MXC || ARCH_MXS + select STMP_DEVICE + select USB_OTG_UTILS + help + Enable this to support the Freescale MXS USB PHY. + + MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. + config USB_MV_OTG tristate "Marvell USB OTG support" depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile index 41aa509..a844b8d 100644 --- a/drivers/usb/otg/Makefile +++ b/drivers/usb/otg/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o obj-$(CONFIG_AB8500_USB) += ab8500-usb.o fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o +obj-$(CONFIG_USB_MXS_PHY) += mxs-phy.o obj-$(CONFIG_USB_MV_OTG) += mv_otg.o diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c new file mode 100644 index 0000000..c1a67cb --- /dev/null +++ b/drivers/usb/otg/mxs-phy.c @@ -0,0 +1,186 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> + * on behalf of DENX Software Engineering GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/usb/otg.h> +#include <linux/stmp_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> + +#define DRIVER_NAME "mxs_phy" + +#define HW_USBPHY_PWD 0x00 +#define HW_USBPHY_CTRL 0x30 +#define HW_USBPHY_CTRL_SET 0x34 +#define HW_USBPHY_CTRL_CLR 0x38 + +#define BM_USBPHY_CTRL_SFTRST BIT(31) +#define BM_USBPHY_CTRL_CLKGATE BIT(30) +#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) +#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) +#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) + +struct mxs_phy { + struct usb_phy phy; + struct clk *clk; +}; + +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) + +static void mxs_phy_hw_init(struct mxs_phy *mxs_phy) +{ + void __iomem *base = mxs_phy->phy.io_priv; + + stmp_reset_block(base + HW_USBPHY_CTRL); + + /* Power up the PHY */ + writel_relaxed(0, base + HW_USBPHY_PWD); + + /* enable FS/LS device */ + writel_relaxed(BM_USBPHY_CTRL_ENUTMILEVEL2 | + BM_USBPHY_CTRL_ENUTMILEVEL3, + base + HW_USBPHY_CTRL_SET); +} + +static int mxs_phy_init(struct usb_phy *phy) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(phy); + + clk_prepare_enable(mxs_phy->clk); + mxs_phy_hw_init(mxs_phy); + + return 0; +} + +static void mxs_phy_shutdown(struct usb_phy *phy) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(phy); + + writel_relaxed(BM_USBPHY_CTRL_CLKGATE, + phy->io_priv + HW_USBPHY_CTRL_SET); + + clk_disable_unprepare(mxs_phy->clk); +} + +static int mxs_phy_on_connect(struct usb_phy *phy, int port) +{ + dev_dbg(phy->dev, "Connect on port %d\n", port); + + mxs_phy_hw_init(to_mxs_phy(phy)); + writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_SET); + + return 0; +} + +static int mxs_phy_on_disconnect(struct usb_phy *phy, int port) +{ + dev_dbg(phy->dev, "Disconnect on port %d\n", port); + + writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_CLR); + + return 0; +} + +static int mxs_phy_probe(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *base; + struct clk *clk; + struct mxs_phy *mxs_phy; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "can't get device resources\n"); + return -ENOENT; + } + + base = devm_request_and_ioremap(&pdev->dev, res); + if (!base) + return -EBUSY; + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, + "can't get the clock, err=%ld", PTR_ERR(clk)); + return PTR_ERR(clk); + } + + mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL); + if (!mxs_phy) { + dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n"); + return -ENOMEM; + } + + mxs_phy->phy.io_priv = base; + mxs_phy->phy.dev = &pdev->dev; + mxs_phy->phy.label = DRIVER_NAME; + mxs_phy->phy.init = mxs_phy_init; + mxs_phy->phy.shutdown = mxs_phy_shutdown; + mxs_phy->phy.notify_connect = mxs_phy_on_connect; + mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; + + ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); + + mxs_phy->clk = clk; + + platform_set_drvdata(pdev, &mxs_phy->phy); + + return 0; +} + +static int __devexit mxs_phy_remove(struct platform_device *pdev) +{ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id mxs_phy_dt_ids[] = { + { .compatible = "fsl,imx23-usbphy", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); + +static struct platform_driver mxs_phy_driver = { + .probe = mxs_phy_probe, + .remove = __devexit_p(mxs_phy_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = mxs_phy_dt_ids, + }, +}; + +static int __init mxs_phy_module_init(void) +{ + return platform_driver_register(&mxs_phy_driver); +} +postcore_initcall(mxs_phy_module_init); + +static void __exit mxs_phy_module_exit(void) +{ + platform_driver_unregister(&mxs_phy_driver); +} +module_exit(mxs_phy_module_exit); + +MODULE_ALIAS("platform:mxs-usb-phy"); +MODULE_AUTHOR("Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>"); +MODULE_AUTHOR("Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>"); +MODULE_DESCRIPTION("Freescale MXS USB PHY driver"); +MODULE_LICENSE("GPL"); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 8/9] usb: otg: add basic mxs phy driver support @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel mxs phy is used in Freescale i.MX SoCs, for example imx23, imx28, imx6Q. This patch adds the basic host support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peter Chen <peter.chen@freescale.com> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Subodh Nijsure <snijsure@grid-net.com> --- Documentation/devicetree/bindings/usb/mxs-phy.txt | 13 ++ drivers/usb/otg/Kconfig | 10 ++ drivers/usb/otg/Makefile | 1 + drivers/usb/otg/mxs-phy.c | 186 +++++++++++++++++++++ 4 files changed, 210 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/mxs-phy.txt create mode 100644 drivers/usb/otg/mxs-phy.c diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt new file mode 100644 index 0000000..5835b27 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt @@ -0,0 +1,13 @@ +* Freescale MXS USB Phy Device + +Required properties: +- compatible: Should be "fsl,imx23-usbphy" +- reg: Should contain registers location and length +- interrupts: Should contain phy interrupt + +Example: +usbphy1: usbphy at 020c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <0 44 0x04>; +}; diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 5c87db0..13fd1ddf 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -116,6 +116,16 @@ config FSL_USB2_OTG help Enable this to support Freescale USB OTG transceiver. +config USB_MXS_PHY + tristate "Freescale MXS USB PHY support" + depends on ARCH_MXC || ARCH_MXS + select STMP_DEVICE + select USB_OTG_UTILS + help + Enable this to support the Freescale MXS USB PHY. + + MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. + config USB_MV_OTG tristate "Marvell USB OTG support" depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile index 41aa509..a844b8d 100644 --- a/drivers/usb/otg/Makefile +++ b/drivers/usb/otg/Makefile @@ -20,4 +20,5 @@ obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o obj-$(CONFIG_AB8500_USB) += ab8500-usb.o fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o +obj-$(CONFIG_USB_MXS_PHY) += mxs-phy.o obj-$(CONFIG_USB_MV_OTG) += mv_otg.o diff --git a/drivers/usb/otg/mxs-phy.c b/drivers/usb/otg/mxs-phy.c new file mode 100644 index 0000000..c1a67cb --- /dev/null +++ b/drivers/usb/otg/mxs-phy.c @@ -0,0 +1,186 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * on behalf of DENX Software Engineering GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/usb/otg.h> +#include <linux/stmp_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> + +#define DRIVER_NAME "mxs_phy" + +#define HW_USBPHY_PWD 0x00 +#define HW_USBPHY_CTRL 0x30 +#define HW_USBPHY_CTRL_SET 0x34 +#define HW_USBPHY_CTRL_CLR 0x38 + +#define BM_USBPHY_CTRL_SFTRST BIT(31) +#define BM_USBPHY_CTRL_CLKGATE BIT(30) +#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) +#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) +#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) + +struct mxs_phy { + struct usb_phy phy; + struct clk *clk; +}; + +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) + +static void mxs_phy_hw_init(struct mxs_phy *mxs_phy) +{ + void __iomem *base = mxs_phy->phy.io_priv; + + stmp_reset_block(base + HW_USBPHY_CTRL); + + /* Power up the PHY */ + writel_relaxed(0, base + HW_USBPHY_PWD); + + /* enable FS/LS device */ + writel_relaxed(BM_USBPHY_CTRL_ENUTMILEVEL2 | + BM_USBPHY_CTRL_ENUTMILEVEL3, + base + HW_USBPHY_CTRL_SET); +} + +static int mxs_phy_init(struct usb_phy *phy) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(phy); + + clk_prepare_enable(mxs_phy->clk); + mxs_phy_hw_init(mxs_phy); + + return 0; +} + +static void mxs_phy_shutdown(struct usb_phy *phy) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(phy); + + writel_relaxed(BM_USBPHY_CTRL_CLKGATE, + phy->io_priv + HW_USBPHY_CTRL_SET); + + clk_disable_unprepare(mxs_phy->clk); +} + +static int mxs_phy_on_connect(struct usb_phy *phy, int port) +{ + dev_dbg(phy->dev, "Connect on port %d\n", port); + + mxs_phy_hw_init(to_mxs_phy(phy)); + writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_SET); + + return 0; +} + +static int mxs_phy_on_disconnect(struct usb_phy *phy, int port) +{ + dev_dbg(phy->dev, "Disconnect on port %d\n", port); + + writel_relaxed(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_CLR); + + return 0; +} + +static int mxs_phy_probe(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *base; + struct clk *clk; + struct mxs_phy *mxs_phy; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "can't get device resources\n"); + return -ENOENT; + } + + base = devm_request_and_ioremap(&pdev->dev, res); + if (!base) + return -EBUSY; + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, + "can't get the clock, err=%ld", PTR_ERR(clk)); + return PTR_ERR(clk); + } + + mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL); + if (!mxs_phy) { + dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n"); + return -ENOMEM; + } + + mxs_phy->phy.io_priv = base; + mxs_phy->phy.dev = &pdev->dev; + mxs_phy->phy.label = DRIVER_NAME; + mxs_phy->phy.init = mxs_phy_init; + mxs_phy->phy.shutdown = mxs_phy_shutdown; + mxs_phy->phy.notify_connect = mxs_phy_on_connect; + mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; + + ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); + + mxs_phy->clk = clk; + + platform_set_drvdata(pdev, &mxs_phy->phy); + + return 0; +} + +static int __devexit mxs_phy_remove(struct platform_device *pdev) +{ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id mxs_phy_dt_ids[] = { + { .compatible = "fsl,imx23-usbphy", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); + +static struct platform_driver mxs_phy_driver = { + .probe = mxs_phy_probe, + .remove = __devexit_p(mxs_phy_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = mxs_phy_dt_ids, + }, +}; + +static int __init mxs_phy_module_init(void) +{ + return platform_driver_register(&mxs_phy_driver); +} +postcore_initcall(mxs_phy_module_init); + +static void __exit mxs_phy_module_exit(void) +{ + platform_driver_unregister(&mxs_phy_driver); +} +module_exit(mxs_phy_module_exit); + +MODULE_ALIAS("platform:mxs-usb-phy"); +MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); +MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); +MODULE_DESCRIPTION("Freescale MXS USB PHY driver"); +MODULE_LICENSE("GPL"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 9/9] usb: chipidea: add imx platform driver 2012-07-07 14:56 ` Richard Zhao @ 2012-07-07 14:56 ` Richard Zhao -1 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ Cc: B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, richard.zhao-KZfg59tc24xl57MIdRCFDg, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ, Peter Chen This patch supports only the host-mode functionality so far. Signed-off-by: Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Signed-off-by: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> Cc: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org> Cc: Alexander Shishkin <alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> Cc: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org> Cc: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org> Tested-by: Subodh Nijsure <snijsure-4jo+YWezP1RWk0Htik3J/w@public.gmane.org> --- .../devicetree/bindings/usb/ci13xxx-imx.txt | 18 ++ drivers/usb/chipidea/Makefile | 3 + drivers/usb/chipidea/ci13xxx_imx.c | 198 ++++++++++++++++++++ 3 files changed, 219 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt new file mode 100644 index 0000000..2c29041 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt @@ -0,0 +1,18 @@ +* Freescale i.MX ci13xxx usb controllers + +Required properties: +- compatible: Should be "fsl,imx27-usb" +- reg: Should contain registers location and length +- interrupts: Should contain controller interrupt + +Optional properties: +- fsl,usbphy: phandler of usb phy that connects to the only one port +- vbus-supply: regulator for vbus + +Examples: +usb@02184000 { /* USB OTG */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + fsl,usbphy = <&usbphy1>; +}; diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index b69900a..5c66d9c 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -14,3 +14,6 @@ ifneq ($(CONFIG_PCI),) obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_pci.o endif +ifneq ($(CONFIG_OF_DEVICE),) + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o +endif diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c new file mode 100644 index 0000000..ef60d06 --- /dev/null +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -0,0 +1,198 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> + * on behalf of DENX Software Engineering GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/dma-mapping.h> +#include <linux/usb/chipidea.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> + +#include "ci.h" + +#define pdev_to_phy(pdev) \ + ((struct usb_phy *)platform_get_drvdata(pdev)) + +struct ci13xxx_imx_data { + struct device_node *phy_np; + struct usb_phy *phy; + struct platform_device *ci_pdev; + struct clk *clk; + struct regulator *reg_vbus; +}; + +static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = { + .name = "ci13xxx_imx", + .flags = CI13XXX_REQUIRE_TRANSCEIVER | + CI13XXX_PULLUP_ON_VBUS | + CI13XXX_DISABLE_STREAMING, + .capoffset = DEF_CAPOFFSET, +}; + +static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) +{ + struct ci13xxx_imx_data *data; + struct platform_device *plat_ci, *phy_pdev; + struct device_node *phy_np; + struct resource *res; + struct regulator *reg_vbus; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Can't get device resources!\n"); + return -ENOENT; + } + + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) { + dev_err(&pdev->dev, + "Failed to get clock, err=%ld\n", PTR_ERR(data->clk)); + return PTR_ERR(data->clk); + } + + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&pdev->dev, + "Failed to prepare or enable clock, err=%d\n", ret); + return ret; + } + + phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0); + if (phy_np) { + data->phy_np = phy_np; + phy_pdev = of_find_device_by_node(phy_np); + if (phy_pdev) { + struct usb_phy *phy; + phy = pdev_to_phy(phy_pdev); + if (phy && + try_module_get(phy_pdev->dev.driver->owner)) { + usb_phy_init(phy); + data->phy = phy; + } + } + } + + /* we only support host now, so enable vbus here */ + reg_vbus = devm_regulator_get(&pdev->dev, "vbus"); + if (!IS_ERR(reg_vbus)) { + ret = regulator_enable(reg_vbus); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable vbus regulator, err=%d\n", + ret); + goto put_np; + } + data->reg_vbus = reg_vbus; + } else { + reg_vbus = NULL; + } + + ci13xxx_imx_platdata.phy = data->phy; + + if (!pdev->dev.dma_mask) { + pdev->dev.dma_mask = devm_kzalloc(&pdev->dev, + sizeof(*pdev->dev.dma_mask), GFP_KERNEL); + if (!pdev->dev.dma_mask) { + ret = -ENOMEM; + dev_err(&pdev->dev, "Failed to alloc dma_mask!\n"); + goto err; + } + *pdev->dev.dma_mask = DMA_BIT_MASK(32); + dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); + } + plat_ci = ci13xxx_add_device(&pdev->dev, + pdev->resource, pdev->num_resources, + &ci13xxx_imx_platdata); + if (IS_ERR(plat_ci)) { + ret = PTR_ERR(plat_ci); + dev_err(&pdev->dev, + "Can't register ci_hdrc platform device, err=%d\n", + ret); + goto err; + } + + data->ci_pdev = plat_ci; + platform_set_drvdata(pdev, data); + + pm_runtime_no_callbacks(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + return 0; + +err: + if (reg_vbus) + regulator_disable(reg_vbus); +put_np: + if (phy_np) + of_node_put(phy_np); + clk_disable_unprepare(data->clk); + return ret; +} + +static int __devexit ci13xxx_imx_remove(struct platform_device *pdev) +{ + struct ci13xxx_imx_data *data = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + ci13xxx_remove_device(data->ci_pdev); + + if (data->reg_vbus) + regulator_disable(data->reg_vbus); + + if (data->phy) { + usb_phy_shutdown(data->phy); + module_put(data->phy->dev->driver->owner); + } + + of_node_put(data->phy_np); + + clk_disable_unprepare(data->clk); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id ci13xxx_imx_dt_ids[] = { + { .compatible = "fsl,imx27-usb", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids); + +static struct platform_driver ci13xxx_imx_driver = { + .probe = ci13xxx_imx_probe, + .remove = __devexit_p(ci13xxx_imx_remove), + .driver = { + .name = "imx_usb", + .owner = THIS_MODULE, + .of_match_table = ci13xxx_imx_dt_ids, + }, +}; + +module_platform_driver(ci13xxx_imx_driver); + +MODULE_ALIAS("platform:imx-usb"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("CI13xxx i.MX USB binding"); +MODULE_AUTHOR("Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>"); +MODULE_AUTHOR("Richard Zhao <richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>"); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 9/9] usb: chipidea: add imx platform driver @ 2012-07-07 14:56 ` Richard Zhao 0 siblings, 0 replies; 44+ messages in thread From: Richard Zhao @ 2012-07-07 14:56 UTC (permalink / raw) To: linux-arm-kernel This patch supports only the host-mode functionality so far. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peter Chen <peter.chen@freescale.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Subodh Nijsure <snijsure@grid-net.com> --- .../devicetree/bindings/usb/ci13xxx-imx.txt | 18 ++ drivers/usb/chipidea/Makefile | 3 + drivers/usb/chipidea/ci13xxx_imx.c | 198 ++++++++++++++++++++ 3 files changed, 219 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ci13xxx-imx.txt create mode 100644 drivers/usb/chipidea/ci13xxx_imx.c diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt new file mode 100644 index 0000000..2c29041 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt @@ -0,0 +1,18 @@ +* Freescale i.MX ci13xxx usb controllers + +Required properties: +- compatible: Should be "fsl,imx27-usb" +- reg: Should contain registers location and length +- interrupts: Should contain controller interrupt + +Optional properties: +- fsl,usbphy: phandler of usb phy that connects to the only one port +- vbus-supply: regulator for vbus + +Examples: +usb at 02184000 { /* USB OTG */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + fsl,usbphy = <&usbphy1>; +}; diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index b69900a..5c66d9c 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -14,3 +14,6 @@ ifneq ($(CONFIG_PCI),) obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_pci.o endif +ifneq ($(CONFIG_OF_DEVICE),) + obj-$(CONFIG_USB_CHIPIDEA) += ci13xxx_imx.o +endif diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c new file mode 100644 index 0000000..ef60d06 --- /dev/null +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -0,0 +1,198 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * on behalf of DENX Software Engineering GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/dma-mapping.h> +#include <linux/usb/chipidea.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> + +#include "ci.h" + +#define pdev_to_phy(pdev) \ + ((struct usb_phy *)platform_get_drvdata(pdev)) + +struct ci13xxx_imx_data { + struct device_node *phy_np; + struct usb_phy *phy; + struct platform_device *ci_pdev; + struct clk *clk; + struct regulator *reg_vbus; +}; + +static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = { + .name = "ci13xxx_imx", + .flags = CI13XXX_REQUIRE_TRANSCEIVER | + CI13XXX_PULLUP_ON_VBUS | + CI13XXX_DISABLE_STREAMING, + .capoffset = DEF_CAPOFFSET, +}; + +static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) +{ + struct ci13xxx_imx_data *data; + struct platform_device *plat_ci, *phy_pdev; + struct device_node *phy_np; + struct resource *res; + struct regulator *reg_vbus; + int ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Can't get device resources!\n"); + return -ENOENT; + } + + data->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->clk)) { + dev_err(&pdev->dev, + "Failed to get clock, err=%ld\n", PTR_ERR(data->clk)); + return PTR_ERR(data->clk); + } + + ret = clk_prepare_enable(data->clk); + if (ret) { + dev_err(&pdev->dev, + "Failed to prepare or enable clock, err=%d\n", ret); + return ret; + } + + phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0); + if (phy_np) { + data->phy_np = phy_np; + phy_pdev = of_find_device_by_node(phy_np); + if (phy_pdev) { + struct usb_phy *phy; + phy = pdev_to_phy(phy_pdev); + if (phy && + try_module_get(phy_pdev->dev.driver->owner)) { + usb_phy_init(phy); + data->phy = phy; + } + } + } + + /* we only support host now, so enable vbus here */ + reg_vbus = devm_regulator_get(&pdev->dev, "vbus"); + if (!IS_ERR(reg_vbus)) { + ret = regulator_enable(reg_vbus); + if (ret) { + dev_err(&pdev->dev, + "Failed to enable vbus regulator, err=%d\n", + ret); + goto put_np; + } + data->reg_vbus = reg_vbus; + } else { + reg_vbus = NULL; + } + + ci13xxx_imx_platdata.phy = data->phy; + + if (!pdev->dev.dma_mask) { + pdev->dev.dma_mask = devm_kzalloc(&pdev->dev, + sizeof(*pdev->dev.dma_mask), GFP_KERNEL); + if (!pdev->dev.dma_mask) { + ret = -ENOMEM; + dev_err(&pdev->dev, "Failed to alloc dma_mask!\n"); + goto err; + } + *pdev->dev.dma_mask = DMA_BIT_MASK(32); + dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); + } + plat_ci = ci13xxx_add_device(&pdev->dev, + pdev->resource, pdev->num_resources, + &ci13xxx_imx_platdata); + if (IS_ERR(plat_ci)) { + ret = PTR_ERR(plat_ci); + dev_err(&pdev->dev, + "Can't register ci_hdrc platform device, err=%d\n", + ret); + goto err; + } + + data->ci_pdev = plat_ci; + platform_set_drvdata(pdev, data); + + pm_runtime_no_callbacks(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + return 0; + +err: + if (reg_vbus) + regulator_disable(reg_vbus); +put_np: + if (phy_np) + of_node_put(phy_np); + clk_disable_unprepare(data->clk); + return ret; +} + +static int __devexit ci13xxx_imx_remove(struct platform_device *pdev) +{ + struct ci13xxx_imx_data *data = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + ci13xxx_remove_device(data->ci_pdev); + + if (data->reg_vbus) + regulator_disable(data->reg_vbus); + + if (data->phy) { + usb_phy_shutdown(data->phy); + module_put(data->phy->dev->driver->owner); + } + + of_node_put(data->phy_np); + + clk_disable_unprepare(data->clk); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id ci13xxx_imx_dt_ids[] = { + { .compatible = "fsl,imx27-usb", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids); + +static struct platform_driver ci13xxx_imx_driver = { + .probe = ci13xxx_imx_probe, + .remove = __devexit_p(ci13xxx_imx_remove), + .driver = { + .name = "imx_usb", + .owner = THIS_MODULE, + .of_match_table = ci13xxx_imx_dt_ids, + }, +}; + +module_platform_driver(ci13xxx_imx_driver); + +MODULE_ALIAS("platform:imx-usb"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("CI13xxx i.MX USB binding"); +MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); +MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 44+ messages in thread
* Re: [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree 2012-07-07 14:56 ` Richard Zhao @ 2012-07-09 17:02 ` Greg KH -1 siblings, 0 replies; 44+ messages in thread From: Greg KH @ 2012-07-09 17:02 UTC (permalink / raw) To: Richard Zhao Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, marex-ynQEQJNshbs, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ On Sat, Jul 07, 2012 at 10:56:39PM +0800, Richard Zhao wrote: > The work is based on ci13xxx rework done by Alexander Shishkin. > > To let Greg pick up, I also added patches Alex queued that I depends on. I've applied everything but patch number 6, which I've responded to with some questions about it. thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree @ 2012-07-09 17:02 ` Greg KH 0 siblings, 0 replies; 44+ messages in thread From: Greg KH @ 2012-07-09 17:02 UTC (permalink / raw) To: linux-arm-kernel On Sat, Jul 07, 2012 at 10:56:39PM +0800, Richard Zhao wrote: > The work is based on ci13xxx rework done by Alexander Shishkin. > > To let Greg pick up, I also added patches Alex queued that I depends on. I've applied everything but patch number 6, which I've responded to with some questions about it. thanks, greg k-h ^ permalink raw reply [flat|nested] 44+ messages in thread
[parent not found: <20120709170219.GA21319-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree 2012-07-09 17:02 ` Greg KH @ 2012-07-10 1:52 ` Marek Vasut -1 siblings, 0 replies; 44+ messages in thread From: Marek Vasut @ 2012-07-10 1:52 UTC (permalink / raw) To: Greg KH Cc: Richard Zhao, linux-usb-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ, B29397-KZfg59tc24xl57MIdRCFDg, B20596-KZfg59tc24xl57MIdRCFDg, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, alexander.shishkin-VuQAYsv1563Yd54FQh9/CA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, dong.aisheng-QSEj5FYQhm4dnm+yROfE0A, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz, linuxzsc-Re5JQEeQqe8AvxtiuMwx3w, balbi-l0cyMroinI0, mkl-bIcnvbaLZ9MEGnE8C9+IrQ Dear Greg KH, > On Sat, Jul 07, 2012 at 10:56:39PM +0800, Richard Zhao wrote: > > The work is based on ci13xxx rework done by Alexander Shishkin. > > > > To let Greg pick up, I also added patches Alex queued that I depends on. > > I've applied everything but patch number 6, which I've responded to > with some questions about it. That #6 emerged after discussion with Alan. It's unlikely on most hardware, but there are a few pieces where that case will happen. > thanks, > > greg k-h Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 44+ messages in thread
* [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree @ 2012-07-10 1:52 ` Marek Vasut 0 siblings, 0 replies; 44+ messages in thread From: Marek Vasut @ 2012-07-10 1:52 UTC (permalink / raw) To: linux-arm-kernel Dear Greg KH, > On Sat, Jul 07, 2012 at 10:56:39PM +0800, Richard Zhao wrote: > > The work is based on ci13xxx rework done by Alexander Shishkin. > > > > To let Greg pick up, I also added patches Alex queued that I depends on. > > I've applied everything but patch number 6, which I've responded to > with some questions about it. That #6 emerged after discussion with Alan. It's unlikely on most hardware, but there are a few pieces where that case will happen. > thanks, > > greg k-h Best regards, Marek Vasut ^ permalink raw reply [flat|nested] 44+ messages in thread
end of thread, other threads:[~2012-07-11 2:53 UTC | newest]
Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-07 14:56 [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree Richard Zhao
2012-07-07 14:56 ` Richard Zhao
[not found] ` <1341673008-29808-1-git-send-email-richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2012-07-07 14:56 ` [PATCH v9 REBASE 1/9] USB: Chipidea: rename struct ci13xxx variables from udc to ci Richard Zhao
2012-07-07 14:56 ` Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 2/9] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 2/9] USB: Chipidea: add unified ci13xxx_{add, remove}_device " Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 3/9] USB: Chipidea: add ci13xxx device id management Richard Zhao
2012-07-07 14:56 ` Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 4/9] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig Richard Zhao
2012-07-07 14:56 ` Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 5/9] usb: otg: add notify_connect/notify_disconnect callback Richard Zhao
2012-07-07 14:56 ` Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change Richard Zhao
2012-07-07 14:56 ` Richard Zhao
[not found] ` <1341673008-29808-7-git-send-email-richard.zhao-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2012-07-09 16:57 ` Greg KH
2012-07-09 16:57 ` Greg KH
[not found] ` <20120709165757.GA6024-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2012-07-10 1:44 ` Richard Zhao
2012-07-10 1:44 ` Richard Zhao
[not found] ` <20120710014450.GF26888-iWYTGMXpHj9ITqJhDdzsOjpauB2SiJktrE5yTffgRl4@public.gmane.org>
2012-07-10 14:24 ` Alan Stern
2012-07-10 14:24 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1207101021580.1308-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2012-07-10 14:53 ` Richard Zhao
2012-07-10 14:53 ` Richard Zhao
2012-07-10 3:14 ` Richard Zhao
2012-07-10 3:14 ` Richard Zhao
[not found] ` <20120710031426.GG26888-iWYTGMXpHj9ITqJhDdzsOjpauB2SiJktrE5yTffgRl4@public.gmane.org>
2012-07-10 3:22 ` Marek Vasut
2012-07-10 3:22 ` Marek Vasut
[not found] ` <201207100522.21162.marex-ynQEQJNshbs@public.gmane.org>
2012-07-10 11:20 ` Richard Zhao
2012-07-10 11:20 ` Richard Zhao
[not found] ` <20120710112050.GH26888-iWYTGMXpHj9ITqJhDdzsOjpauB2SiJktrE5yTffgRl4@public.gmane.org>
2012-07-10 11:38 ` Marek Vasut
2012-07-10 11:38 ` Marek Vasut
2012-07-10 15:07 ` Alan Stern
2012-07-10 15:07 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1207101024110.1308-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2012-07-11 2:53 ` Richard Zhao
2012-07-11 2:53 ` Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 7/9] usb: chipidea: permit driver bindings pass phy pointer Richard Zhao
2012-07-07 14:56 ` Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 8/9] usb: otg: add basic mxs phy driver support Richard Zhao
2012-07-07 14:56 ` Richard Zhao
2012-07-07 14:56 ` [PATCH v9 REBASE 9/9] usb: chipidea: add imx platform driver Richard Zhao
2012-07-07 14:56 ` Richard Zhao
2012-07-09 17:02 ` [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree Greg KH
2012-07-09 17:02 ` Greg KH
[not found] ` <20120709170219.GA21319-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2012-07-10 1:52 ` Marek Vasut
2012-07-10 1:52 ` Marek Vasut
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.