From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> To: Samuel Ortiz <samuel.ortiz@intel.com> Cc: kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "Ying-Chun Liu (PaulLiu)" <paulliu@debian.org>, "Philippe Rétornaz" <philippe.retornaz@epfl.ch>, "Marc Reilly" <marc@cpdesign.com.au>, "Mark Brown" <broonie@opensource.wolfsonmicro.com> Subject: [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver Date: Thu, 12 Jul 2012 11:57:46 +0200 [thread overview] Message-ID: <1342087073-3892-1-git-send-email-u.kleine-koenig@pengutronix.de> (raw) Hello, This series was tested on a Phytec pcm038 (mc13783 on spi) using traditional boot (i.e. not dt) and on a i.MX53 based machine (mc34708 on i2c) using dt boot. Philippe's patches are already in next, they are just included here for those who want to test the patches. The 'mfd/mc13xxx: drop modifying driver's id_table in probe' was already sent out yesterday and is included here because the last patch depends on it. Best regards Uwe Philippe Rétornaz (2): MFD: Fix mc13xxx SPI regmap MFD: mc13xxx workaround SPI hardware bug on i.Mx Uwe Kleine-König (5): rtc/mc13xxx: use MODULE_DEVICE_TABLE instead of MODULE_ALIAS rtc/mc13xxx: add support for the rtc in the mc34708 pmic mfd/mc13xxx: drop modifying driver's id_table in probe mfd/mc13xxx: change probing details for mc13xxx devices mfd/mc13xxx: add support for mc34708 drivers/mfd/mc13xxx-core.c | 94 ++++++++++++++++++++-------------------- drivers/mfd/mc13xxx-i2c.c | 28 ++++++------ drivers/mfd/mc13xxx-spi.c | 102 +++++++++++++++++++++++++++++++++++--------- drivers/mfd/mc13xxx.h | 18 +++++--- drivers/rtc/rtc-mc13xxx.c | 6 ++- 5 files changed, 159 insertions(+), 89 deletions(-) -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: u.kleine-koenig@pengutronix.de (Uwe Kleine-König) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver Date: Thu, 12 Jul 2012 11:57:46 +0200 [thread overview] Message-ID: <1342087073-3892-1-git-send-email-u.kleine-koenig@pengutronix.de> (raw) Hello, This series was tested on a Phytec pcm038 (mc13783 on spi) using traditional boot (i.e. not dt) and on a i.MX53 based machine (mc34708 on i2c) using dt boot. Philippe's patches are already in next, they are just included here for those who want to test the patches. The 'mfd/mc13xxx: drop modifying driver's id_table in probe' was already sent out yesterday and is included here because the last patch depends on it. Best regards Uwe Philippe R?tornaz (2): MFD: Fix mc13xxx SPI regmap MFD: mc13xxx workaround SPI hardware bug on i.Mx Uwe Kleine-K?nig (5): rtc/mc13xxx: use MODULE_DEVICE_TABLE instead of MODULE_ALIAS rtc/mc13xxx: add support for the rtc in the mc34708 pmic mfd/mc13xxx: drop modifying driver's id_table in probe mfd/mc13xxx: change probing details for mc13xxx devices mfd/mc13xxx: add support for mc34708 drivers/mfd/mc13xxx-core.c | 94 ++++++++++++++++++++-------------------- drivers/mfd/mc13xxx-i2c.c | 28 ++++++------ drivers/mfd/mc13xxx-spi.c | 102 +++++++++++++++++++++++++++++++++++--------- drivers/mfd/mc13xxx.h | 18 +++++--- drivers/rtc/rtc-mc13xxx.c | 6 ++- 5 files changed, 159 insertions(+), 89 deletions(-) -- 1.7.10.4
next reply other threads:[~2012-07-12 10:09 UTC|newest] Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-07-12 9:57 Uwe Kleine-König [this message] 2012-07-12 9:57 ` [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver Uwe Kleine-König 2012-07-12 9:57 ` [PATCH 1/7] MFD: Fix mc13xxx SPI regmap Uwe Kleine-König 2012-07-12 9:57 ` Uwe Kleine-König 2012-07-12 9:57 ` [PATCH 2/7] MFD: mc13xxx workaround SPI hardware bug on i.Mx Uwe Kleine-König 2012-07-12 9:57 ` Uwe Kleine-König 2012-07-12 9:57 ` [PATCH 3/7] rtc/mc13xxx: use MODULE_DEVICE_TABLE instead of MODULE_ALIAS Uwe Kleine-König 2012-07-12 9:57 ` Uwe Kleine-König 2012-07-12 9:57 ` [PATCH 4/7] rtc/mc13xxx: add support for the rtc in the mc34708 pmic Uwe Kleine-König 2012-07-12 9:57 ` Uwe Kleine-König 2012-07-12 9:57 ` [PATCH 5/7] mfd/mc13xxx: drop modifying driver's id_table in probe Uwe Kleine-König 2012-07-12 9:57 ` Uwe Kleine-König 2012-07-12 9:57 ` [PATCH 6/7] mfd/mc13xxx: change probing details for mc13xxx devices Uwe Kleine-König 2012-07-12 9:57 ` Uwe Kleine-König 2012-07-13 15:22 ` Uwe Kleine-König 2012-07-13 15:22 ` Uwe Kleine-König 2012-07-12 9:57 ` [PATCH 7/7] mfd/mc13xxx: add support for mc34708 Uwe Kleine-König 2012-07-12 9:57 ` Uwe Kleine-König 2012-07-12 23:02 ` [PATCH 0/7] Add support for Freescale's mc34708 to mc13xxx driver Marc Reilly 2012-07-12 23:02 ` Marc Reilly 2012-07-13 8:48 ` Uwe Kleine-König 2012-07-13 8:48 ` Uwe Kleine-König 2012-07-13 19:39 ` Junio C Hamano 2012-09-05 14:22 ` Fabio Estevam 2012-09-05 14:22 ` Fabio Estevam 2012-10-04 13:01 ` Fabio Estevam 2012-10-04 13:01 ` Fabio Estevam 2012-10-04 13:51 ` Samuel Ortiz 2012-10-04 13:51 ` Samuel Ortiz 2012-10-04 14:11 ` Uwe Kleine-König 2012-10-04 14:11 ` Uwe Kleine-König 2012-10-27 19:19 ` Fabio Estevam 2012-10-27 19:19 ` Fabio Estevam 2012-11-06 22:24 ` Samuel Ortiz 2012-11-06 22:24 ` Samuel Ortiz 2012-08-02 15:52 ` Fabio Estevam 2012-08-02 15:52 ` Fabio Estevam
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1342087073-3892-1-git-send-email-u.kleine-koenig@pengutronix.de \ --to=u.kleine-koenig@pengutronix.de \ --cc=broonie@opensource.wolfsonmicro.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=marc@cpdesign.com.au \ --cc=paulliu@debian.org \ --cc=philippe.retornaz@epfl.ch \ --cc=samuel.ortiz@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.