[PULL] [PATCH 0/4] arm: at91: gpio fix

[PULL] [PATCH 0/4] arm: at91: gpio fix

[Jean-Christophe PLAGNIOL-VILLARD]

Hi,

	This patch series fix 2 issue on at91

	first the gpio are not mux to gpio shen requested and free

	second on the sam9x5 series we ma not have 32 pins routed on each bank

The following changes since commit 84a1caf1453c3d44050bd22db958af4a7f99315c:

  Linux 3.5-rc7 (2012-07-14 15:40:28 -0700)

are available in the git repository at:

  git://github.com/at91linux/linux-at91.git tags/at91-for-3.5-gpio-fix

for you to fetch changes up to 8b8d117749961ec387e7a3b1ecc29eb24c73ca9c:

  arm: at91: at91sam9x5: fix gpio number per bank (2012-07-15 20:46:06 +0800)

----------------------------------------------------------------
arm: at91: gpio fixes

This patch series fix 2 issue on at91

first the gpio are not mux to gpio shen requested and free

second on the sam9x5 series we ma not have 32 pins routed on each bank

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (4):
      ARM: at91: gpio: implement request
      ARM: at91: gpio: implement gpio_free
      at91: regroup gpio and pinctrl under a simple-bus
      arm: at91: at91sam9x5: fix gpio number per bank

 Documentation/devicetree/bindings/gpio/gpio_atmel.txt |    5 +++++
 arch/arm/boot/dts/at91sam9260.dtsi                    |   56 +++++++++++++++++++++++++++++++++-----------------------
 arch/arm/boot/dts/at91sam9263.dtsi                    |   98 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------
 arch/arm/boot/dts/at91sam9g45.dtsi                    |   87 ++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------------
 arch/arm/boot/dts/at91sam9n12.dtsi                    |   79 +++++++++++++++++++++++++++++++++++++++++++++----------------------------------
 arch/arm/boot/dts/at91sam9x5.dtsi                     |   75 ++++++++++++++++++++++++++++++++++++++++++++-------------------------------
 arch/arm/mach-at91/gpio.c                             |   52 +++++++++++++++++++++++++++++++++++++++++-----------
 7 files changed, 271 insertions(+), 181 deletions(-)

Best Regards,
J.

[PATCH 1/4] ARM: at91: gpio: implement request

[Jean-Christophe PLAGNIOL-VILLARD]

confire the pin as pio when requested

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/gpio.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 325837a..994ed02 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -44,6 +44,7 @@ struct at91_gpio_chip {
 
 #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
 
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
 static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
 static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
 static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
@@ -57,6 +58,7 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
 	{								\
 		.chip = {						\
 			.label		  = name,			\
+			.request	  = at91_gpiolib_request,	\
 			.direction_input  = at91_gpiolib_direction_input, \
 			.direction_output = at91_gpiolib_direction_output, \
 			.get		  = at91_gpiolib_get,		\
@@ -861,6 +863,18 @@ void __init at91_gpio_irq_setup(void)
 }
 
 /* gpiolib support */
+
+
+static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+	void __iomem *pio = at91_gpio->regbase;
+	unsigned mask = 1 << offset;
+
+	__raw_writel(mask, pio + PIO_PER);
+	return 0;
+}
+
 static int at91_gpiolib_direction_input(struct gpio_chip *chip,
 					unsigned offset)
 {
-- 
1.7.10

[PATCH 2/4] ARM: at91: gpio: implement gpio_free

[Jean-Christophe PLAGNIOL-VILLARD]

configure a gpio as input when freeing it to reduce power consumption

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/mach-at91/gpio.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 994ed02..3833f82 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -45,6 +45,7 @@ struct at91_gpio_chip {
 #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
 
 static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
+static void at91_gpiolib_free(struct gpio_chip *chip, unsigned offset);
 static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
 static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
 static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
@@ -59,6 +60,7 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
 		.chip = {						\
 			.label		  = name,			\
 			.request	  = at91_gpiolib_request,	\
+			.free		  = at91_gpiolib_free,		\
 			.direction_input  = at91_gpiolib_direction_input, \
 			.direction_output = at91_gpiolib_direction_output, \
 			.get		  = at91_gpiolib_get,		\
@@ -863,7 +865,10 @@ void __init at91_gpio_irq_setup(void)
 }
 
 /* gpiolib support */
-
+static void at91_gpiolib_free(struct gpio_chip *chip, unsigned offset)
+{
+	at91_gpiolib_direction_input(chip, offset);
+}
 
 static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
 {
-- 
1.7.10

[PATCH 2/4] ARM: at91: gpio: implement gpio_free

[Nicolas Ferre]

On 07/15/2012 03:40 PM, Jean-Christophe PLAGNIOL-VILLARD :
> configure a gpio as input when freeing it to reduce power consumption
> 
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/mach-at91/gpio.c |    7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
> index 994ed02..3833f82 100644
> --- a/arch/arm/mach-at91/gpio.c
> +++ b/arch/arm/mach-at91/gpio.c
> @@ -45,6 +45,7 @@ struct at91_gpio_chip {
>  #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
>  
>  static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
> +static void at91_gpiolib_free(struct gpio_chip *chip, unsigned offset);
>  static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
>  static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
>  static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
> @@ -59,6 +60,7 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
>  		.chip = {						\
>  			.label		  = name,			\
>  			.request	  = at91_gpiolib_request,	\
> +			.free		  = at91_gpiolib_free,		\
>  			.direction_input  = at91_gpiolib_direction_input, \
>  			.direction_output = at91_gpiolib_direction_output, \
>  			.get		  = at91_gpiolib_get,		\
> @@ -863,7 +865,10 @@ void __init at91_gpio_irq_setup(void)
>  }
>  
>  /* gpiolib support */
> -
> +static void at91_gpiolib_free(struct gpio_chip *chip, unsigned offset)
> +{
> +	at91_gpiolib_direction_input(chip, offset);

I know we talked about it, but now I am not sure.
Maybe a safer solution would be to not touching the gpio configuration
when freeing it...

> +}
>  
>  static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
>  {
> 


-- 
Nicolas Ferre

[PATCH 3/4] at91: regroup gpio and pinctrl under a simple-bus

[Jean-Christophe PLAGNIOL-VILLARD]

Fix also the reg size as we have 512 bytes bank not 256 bytes per gpio/mux
controller

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 arch/arm/boot/dts/at91sam9260.dtsi |   56 ++++++++++++---------
 arch/arm/boot/dts/at91sam9263.dtsi |   98 ++++++++++++++++++++----------------
 arch/arm/boot/dts/at91sam9g45.dtsi |   87 ++++++++++++++++++--------------
 arch/arm/boot/dts/at91sam9n12.dtsi |   79 ++++++++++++++++-------------
 arch/arm/boot/dts/at91sam9x5.dtsi  |   73 +++++++++++++++------------
 5 files changed, 223 insertions(+), 170 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index f449efc..1f6c3cd 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -96,31 +96,41 @@
 				interrupts = <26 4 27 4 28 4>;
 			};
 
-			pioA: gpio at fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+			pinctrl at fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				reg = <0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200>;
+
+				pioA: gpio at 80018000 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioB: gpio at fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+				pioB: gpio at fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <3 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioC: gpio at fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
+				pioC: gpio at fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 			};
 
 			dbgu: serial at fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 0209913..84ac493 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -87,49 +87,61 @@
 				reg = <0xfffffd10 0x10>;
 			};
 
-			pioA: gpio at fffff200 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioB: gpio at fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioC: gpio at fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioD: gpio at fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioE: gpio at fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
+			pinctrl at fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				reg = <0xfffff200 0x200
+				       0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200
+				       0xfffffa00 0x200>;
+
+				pioA: gpio at fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
+
+				pioB: gpio at fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
+
+				pioC: gpio at fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
+
+				pioD: gpio at fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <4 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
+
+				pioE: gpio at fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <4 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 			};
 
 			dbgu: serial at ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 7dbccaf..9e03049 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -105,49 +105,58 @@
 				interrupts = <21 4>;
 			};
 
-			pioA: gpio at fffff200 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff200 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+			pinctrl at fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+
+				reg = <0xfffff200 0xa00>;
+
+				pioA: gpio at fffff200 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff200 0x200>;
+					interrupts = <2 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioB: gpio at fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+				pioB: gpio at fffff400 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <3 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioC: gpio at fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <4 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+				pioC: gpio at fffff600 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <4 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioD: gpio at fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <5 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+				pioD: gpio at fffff800 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <5 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioE: gpio at fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <5 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
+				pioE: gpio at fffffa00 {
+					compatible = "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <5 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 			};
 
 			dbgu: serial at ffffee00 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index cb84de7..7bd81c4 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -100,40 +100,51 @@
 				interrupts = <20 4>;
 			};
 
-			pioA: gpio at fffff400 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioB: gpio at fffff600 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioC: gpio at fffff800 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pioD: gpio at fffffa00 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
+			pinctrl at fffff400 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				reg = <0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200
+				       0xfffffa00 0x200>;
+
+				pioA: gpio at fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
+
+				pioB: gpio at fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
+
+				pioC: gpio at fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
+
+				pioD: gpio at fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 			};
 
 			dbgu: serial at fffff200 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 6b3ef43..e25c8d0 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -107,40 +107,51 @@
 				interrupts = <21 4>;
 			};
 
-			pioA: gpio at fffff400 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+			pinctrl at fffff200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+				reg = <0xfffff400 0x200
+				       0xfffff600 0x200
+				       0xfffff800 0x200
+				       0xfffffa00 0x200>;
+
+				pioA: gpio at fffff400 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff400 0x200>;
+					interrupts = <2 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioB: gpio at fffff600 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff600 0x100>;
-				interrupts = <2 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+				pioB: gpio at fffff600 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff600 0x200>;
+					interrupts = <2 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioC: gpio at fffff800 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffff800 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
-			};
+				pioC: gpio at fffff800 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffff800 0x200>;
+					interrupts = <3 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 
-			pioD: gpio at fffffa00 {
-				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
-				reg = <0xfffffa00 0x100>;
-				interrupts = <3 4>;
-				#gpio-cells = <2>;
-				gpio-controller;
-				interrupt-controller;
+				pioD: gpio at fffffa00 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfffffa00 0x200>;
+					interrupts = <3 4>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+				};
 			};
 
 			dbgu: serial at fffff200 {
-- 
1.7.10

[PATCH 3/4] at91: regroup gpio and pinctrl under a simple-bus

[Nicolas Ferre]

On 07/15/2012 03:40 PM, Jean-Christophe PLAGNIOL-VILLARD :
> Fix also the reg size as we have 512 bytes bank not 256 bytes per gpio/mux
> controller

Definitively, there is not enough information about the purpose of this
patch: please elaborate a bit more the comment.

Moreover, it seems strange to change the device tree files without
introducing the pinctrl/pinmux driver (and the associated documentation)
at the same time...

So, no, not these changes now.

> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/boot/dts/at91sam9260.dtsi |   56 ++++++++++++---------
>  arch/arm/boot/dts/at91sam9263.dtsi |   98 ++++++++++++++++++++----------------
>  arch/arm/boot/dts/at91sam9g45.dtsi |   87 ++++++++++++++++++--------------
>  arch/arm/boot/dts/at91sam9n12.dtsi |   79 ++++++++++++++++-------------
>  arch/arm/boot/dts/at91sam9x5.dtsi  |   73 +++++++++++++++------------
>  5 files changed, 223 insertions(+), 170 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
> index f449efc..1f6c3cd 100644
> --- a/arch/arm/boot/dts/at91sam9260.dtsi
> +++ b/arch/arm/boot/dts/at91sam9260.dtsi
> @@ -96,31 +96,41 @@
>  				interrupts = <26 4 27 4 28 4>;
>  			};
>  
> -			pioA: gpio at fffff400 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff400 0x100>;
> -				interrupts = <2 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +			pinctrl at fffff400 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges;
> +				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
> +				reg = <0xfffff400 0x200
> +				       0xfffff600 0x200
> +				       0xfffff800 0x200>;
> +
> +				pioA: gpio at 80018000 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff400 0x200>;
> +					interrupts = <2 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioB: gpio at fffff600 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff600 0x100>;
> -				interrupts = <3 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +				pioB: gpio at fffff600 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff600 0x200>;
> +					interrupts = <3 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioC: gpio at fffff800 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff800 0x100>;
> -				interrupts = <4 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> +				pioC: gpio at fffff800 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff800 0x200>;
> +					interrupts = <4 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  			};
>  
>  			dbgu: serial at fffff200 {
> diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
> index 0209913..84ac493 100644
> --- a/arch/arm/boot/dts/at91sam9263.dtsi
> +++ b/arch/arm/boot/dts/at91sam9263.dtsi
> @@ -87,49 +87,61 @@
>  				reg = <0xfffffd10 0x10>;
>  			};
>  
> -			pioA: gpio at fffff200 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff200 0x100>;
> -				interrupts = <2 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> -
> -			pioB: gpio at fffff400 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff400 0x100>;
> -				interrupts = <3 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> -
> -			pioC: gpio at fffff600 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff600 0x100>;
> -				interrupts = <4 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> -
> -			pioD: gpio at fffff800 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff800 0x100>;
> -				interrupts = <4 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> -
> -			pioE: gpio at fffffa00 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffffa00 0x100>;
> -				interrupts = <4 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> +			pinctrl at fffff200 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges;
> +				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
> +				reg = <0xfffff200 0x200
> +				       0xfffff400 0x200
> +				       0xfffff600 0x200
> +				       0xfffff800 0x200
> +				       0xfffffa00 0x200>;
> +
> +				pioA: gpio at fffff200 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff200 0x200>;
> +					interrupts = <2 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
> +
> +				pioB: gpio at fffff400 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff400 0x200>;
> +					interrupts = <3 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
> +
> +				pioC: gpio at fffff600 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff600 0x200>;
> +					interrupts = <4 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
> +
> +				pioD: gpio at fffff800 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff800 0x200>;
> +					interrupts = <4 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
> +
> +				pioE: gpio at fffffa00 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffffa00 0x200>;
> +					interrupts = <4 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  			};
>  
>  			dbgu: serial at ffffee00 {
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index 7dbccaf..9e03049 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -105,49 +105,58 @@
>  				interrupts = <21 4>;
>  			};
>  
> -			pioA: gpio at fffff200 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff200 0x100>;
> -				interrupts = <2 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +			pinctrl at fffff200 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges;
> +				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
> +
> +				reg = <0xfffff200 0xa00>;
> +
> +				pioA: gpio at fffff200 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff200 0x200>;
> +					interrupts = <2 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioB: gpio at fffff400 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff400 0x100>;
> -				interrupts = <3 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +				pioB: gpio at fffff400 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff400 0x200>;
> +					interrupts = <3 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioC: gpio at fffff600 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff600 0x100>;
> -				interrupts = <4 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +				pioC: gpio at fffff600 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff600 0x200>;
> +					interrupts = <4 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioD: gpio at fffff800 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffff800 0x100>;
> -				interrupts = <5 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +				pioD: gpio at fffff800 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffff800 0x200>;
> +					interrupts = <5 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioE: gpio at fffffa00 {
> -				compatible = "atmel,at91rm9200-gpio";
> -				reg = <0xfffffa00 0x100>;
> -				interrupts = <5 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> +				pioE: gpio at fffffa00 {
> +					compatible = "atmel,at91rm9200-gpio";
> +					reg = <0xfffffa00 0x200>;
> +					interrupts = <5 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  			};
>  
>  			dbgu: serial at ffffee00 {
> diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
> index cb84de7..7bd81c4 100644
> --- a/arch/arm/boot/dts/at91sam9n12.dtsi
> +++ b/arch/arm/boot/dts/at91sam9n12.dtsi
> @@ -100,40 +100,51 @@
>  				interrupts = <20 4>;
>  			};
>  
> -			pioA: gpio at fffff400 {
> -				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> -				reg = <0xfffff400 0x100>;
> -				interrupts = <2 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> -
> -			pioB: gpio at fffff600 {
> -				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> -				reg = <0xfffff600 0x100>;
> -				interrupts = <2 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> -
> -			pioC: gpio at fffff800 {
> -				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> -				reg = <0xfffff800 0x100>;
> -				interrupts = <3 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> -
> -			pioD: gpio at fffffa00 {
> -				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> -				reg = <0xfffffa00 0x100>;
> -				interrupts = <3 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> +			pinctrl at fffff400 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges;
> +				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
> +				reg = <0xfffff400 0x200
> +				       0xfffff600 0x200
> +				       0xfffff800 0x200
> +				       0xfffffa00 0x200>;
> +
> +				pioA: gpio at fffff400 {
> +					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> +					reg = <0xfffff400 0x200>;
> +					interrupts = <2 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
> +
> +				pioB: gpio at fffff600 {
> +					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> +					reg = <0xfffff600 0x200>;
> +					interrupts = <2 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
> +
> +				pioC: gpio at fffff800 {
> +					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> +					reg = <0xfffff800 0x200>;
> +					interrupts = <3 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
> +
> +				pioD: gpio at fffffa00 {
> +					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> +					reg = <0xfffffa00 0x200>;
> +					interrupts = <3 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  			};
>  
>  			dbgu: serial at fffff200 {
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index 6b3ef43..e25c8d0 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -107,40 +107,51 @@
>  				interrupts = <21 4>;
>  			};
>  
> -			pioA: gpio at fffff400 {
> -				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> -				reg = <0xfffff400 0x100>;
> -				interrupts = <2 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +			pinctrl at fffff200 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges;
> +				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
> +				reg = <0xfffff400 0x200
> +				       0xfffff600 0x200
> +				       0xfffff800 0x200
> +				       0xfffffa00 0x200>;
> +
> +				pioA: gpio at fffff400 {
> +					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> +					reg = <0xfffff400 0x200>;
> +					interrupts = <2 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioB: gpio at fffff600 {
> -				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> -				reg = <0xfffff600 0x100>;
> -				interrupts = <2 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +				pioB: gpio at fffff600 {
> +					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> +					reg = <0xfffff600 0x200>;
> +					interrupts = <2 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioC: gpio at fffff800 {
> -				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> -				reg = <0xfffff800 0x100>;
> -				interrupts = <3 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> -			};
> +				pioC: gpio at fffff800 {
> +					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> +					reg = <0xfffff800 0x200>;
> +					interrupts = <3 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  
> -			pioD: gpio at fffffa00 {
> -				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> -				reg = <0xfffffa00 0x100>;
> -				interrupts = <3 4>;
> -				#gpio-cells = <2>;
> -				gpio-controller;
> -				interrupt-controller;
> +				pioD: gpio at fffffa00 {
> +					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
> +					reg = <0xfffffa00 0x200>;
> +					interrupts = <3 4>;
> +					#gpio-cells = <2>;
> +					gpio-controller;
> +					interrupt-controller;
> +				};
>  			};
>  
>  			dbgu: serial at fffff200 {
> 


-- 
Nicolas Ferre

[PATCH 4/4] arm: at91: at91sam9x5: fix gpio number per bank

[Jean-Christophe PLAGNIOL-VILLARD]

On the serie 5 bank b and d have 19 and 22 pins only.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 .../devicetree/bindings/gpio/gpio_atmel.txt        |    5 +++
 arch/arm/boot/dts/at91sam9x5.dtsi                  |    2 ++
 arch/arm/mach-at91/gpio.c                          |   33 +++++++++++++-------
 3 files changed, 29 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
index 66efc80..d8dd425 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
@@ -9,6 +9,10 @@ Required properties:
   unused).
 - gpio-controller: Marks the device node as a GPIO controller.
 
+optional properties:
+- gpio-nb: Number of gpio if absent 32.
+
+
 Example:
 	pioA: gpio at fffff200 {
 		compatible = "atmel,at91rm9200-gpio";
@@ -16,5 +20,6 @@ Example:
 		interrupts = <2 4>;
 		#gpio-cells = <2>;
 		gpio-controller;
+                gpio-nb = <32>;
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index e25c8d0..e4d785b 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -132,6 +132,7 @@
 					interrupts = <2 4>;
 					#gpio-cells = <2>;
 					gpio-controller;
+					gpio-nb = <19>;
 					interrupt-controller;
 				};
 
@@ -150,6 +151,7 @@
 					interrupts = <3 4>;
 					#gpio-cells = <2>;
 					gpio-controller;
+					gpio-nb = <22>;
 					interrupt-controller;
 				};
 			};
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 3833f82..1ab06e8 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -31,6 +31,8 @@
 
 #include "generic.h"
 
+#define MAX_NB_GPIO_PER_BANK	32
+
 struct at91_gpio_chip {
 	struct gpio_chip	chip;
 	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
@@ -55,7 +57,7 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
 					unsigned offset);
 static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
 
-#define AT91_GPIO_CHIP(name, nr_gpio)					\
+#define AT91_GPIO_CHIP(name)						\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
@@ -67,16 +69,16 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
 			.set		  = at91_gpiolib_set,		\
 			.dbg_show	  = at91_gpiolib_dbg_show,	\
 			.to_irq		  = at91_gpiolib_to_irq,	\
-			.ngpio		  = nr_gpio,			\
+			.ngpio		  = MAX_NB_GPIO_PER_BANK,	\
 		},							\
 	}
 
 static struct at91_gpio_chip gpio_chip[] = {
-	AT91_GPIO_CHIP("pioA", 32),
-	AT91_GPIO_CHIP("pioB", 32),
-	AT91_GPIO_CHIP("pioC", 32),
-	AT91_GPIO_CHIP("pioD", 32),
-	AT91_GPIO_CHIP("pioE", 32),
+	AT91_GPIO_CHIP("pioA"),
+	AT91_GPIO_CHIP("pioB"),
+	AT91_GPIO_CHIP("pioC"),
+	AT91_GPIO_CHIP("pioD"),
+	AT91_GPIO_CHIP("pioE"),
 };
 
 static int gpio_banks;
@@ -91,7 +93,7 @@ static unsigned long at91_gpio_caps;
 
 static inline void __iomem *pin_to_controller(unsigned pin)
 {
-	pin /= 32;
+	pin /= MAX_NB_GPIO_PER_BANK;
 	if (likely(pin < gpio_banks))
 		return gpio_chip[pin].regbase;
 
@@ -100,7 +102,7 @@ static inline void __iomem *pin_to_controller(unsigned pin)
 
 static inline unsigned pin_to_mask(unsigned pin)
 {
-	return 1 << (pin % 32);
+	return 1 << (pin % MAX_NB_GPIO_PER_BANK);
 }
 
 
@@ -998,6 +1000,7 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
 {
 	int alias_idx;
 	struct at91_gpio_chip *at91_gpio;
+	uint32_t ngpio;
 
 	if (!np)
 		return;
@@ -1010,7 +1013,7 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
 	}
 
 	at91_gpio = &gpio_chip[alias_idx];
-	at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio;
+	at91_gpio->chip.base = alias_idx * MAX_NB_GPIO_PER_BANK;
 
 	at91_gpio->regbase = of_iomap(np, 0);
 	if (!at91_gpio->regbase) {
@@ -1030,6 +1033,14 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
 	if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
 		at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
 
+	if (!of_property_read_u32(np, "gpio-nb", &ngpio)) {
+		if (ngpio >= MAX_NB_GPIO_PER_BANK)
+			pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
+			       alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK);
+		else
+			at91_gpio->chip.ngpio = ngpio;
+	}
+
 	/* Setup clock */
 	if (at91_gpio_setup_clk(alias_idx))
 		goto ioremap_err;
@@ -1067,7 +1078,7 @@ static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
 {
 	struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
 
-	at91_gpio->chip.base = idx * at91_gpio->chip.ngpio;
+	at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK;
 	at91_gpio->pioc_hwirq = pioc_hwirq;
 	at91_gpio->pioc_idx = idx;
 
-- 
1.7.10

[PATCH 4/4] arm: at91: at91sam9x5: fix gpio number per bank

[Olof Johansson]

Hi,


Two nits below.

On Sun, Jul 15, 2012 at 03:40:37PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On the serie 5 bank b and d have 19 and 22 pins only.
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  .../devicetree/bindings/gpio/gpio_atmel.txt        |    5 +++
>  arch/arm/boot/dts/at91sam9x5.dtsi                  |    2 ++
>  arch/arm/mach-at91/gpio.c                          |   33 +++++++++++++-------
>  3 files changed, 29 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> index 66efc80..d8dd425 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> @@ -9,6 +9,10 @@ Required properties:
>    unused).
>  - gpio-controller: Marks the device node as a GPIO controller.
>  
> +optional properties:
> +- gpio-nb: Number of gpio if absent 32.

"Number of gpios, if absent default is 32"

> +
> +
>  Example:
>  	pioA: gpio at fffff200 {
>  		compatible = "atmel,at91rm9200-gpio";
> @@ -16,5 +20,6 @@ Example:
>  		interrupts = <2 4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +                gpio-nb = <32>;
>  	};

Whitespace (tabs vs spaces)


-Olof

[PATCH 4/4] arm: at91: at91sam9x5: fix gpio number per bank

[Nicolas Ferre]

On 07/15/2012 03:40 PM, Jean-Christophe PLAGNIOL-VILLARD :
> On the serie 5 bank b and d have 19 and 22 pins only.

No, it is not understandable.

> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  .../devicetree/bindings/gpio/gpio_atmel.txt        |    5 +++
>  arch/arm/boot/dts/at91sam9x5.dtsi                  |    2 ++
>  arch/arm/mach-at91/gpio.c                          |   33 +++++++++++++-------
>  3 files changed, 29 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> index 66efc80..d8dd425 100644
> --- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> +++ b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
> @@ -9,6 +9,10 @@ Required properties:
>    unused).
>  - gpio-controller: Marks the device node as a GPIO controller.
>  
> +optional properties:
> +- gpio-nb: Number of gpio if absent 32.

Cf. Olof's comments.

> +
> +
>  Example:
>  	pioA: gpio at fffff200 {
>  		compatible = "atmel,at91rm9200-gpio";
> @@ -16,5 +20,6 @@ Example:
>  		interrupts = <2 4>;
>  		#gpio-cells = <2>;
>  		gpio-controller;
> +                gpio-nb = <32>;

No need: 32 is the default.

>  	};
>  
> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
> index e25c8d0..e4d785b 100644
> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
> @@ -132,6 +132,7 @@
>  					interrupts = <2 4>;
>  					#gpio-cells = <2>;
>  					gpio-controller;
> +					gpio-nb = <19>;
>  					interrupt-controller;
>  				};
>  
> @@ -150,6 +151,7 @@
>  					interrupts = <3 4>;
>  					#gpio-cells = <2>;
>  					gpio-controller;
> +					gpio-nb = <22>;
>  					interrupt-controller;
>  				};
>  			};
> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
> index 3833f82..1ab06e8 100644
> --- a/arch/arm/mach-at91/gpio.c
> +++ b/arch/arm/mach-at91/gpio.c
> @@ -31,6 +31,8 @@
>  
>  #include "generic.h"
>  
> +#define MAX_NB_GPIO_PER_BANK	32
> +
>  struct at91_gpio_chip {
>  	struct gpio_chip	chip;
>  	struct at91_gpio_chip	*next;		/* Bank sharing same clock */
> @@ -55,7 +57,7 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
>  					unsigned offset);
>  static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
>  
> -#define AT91_GPIO_CHIP(name, nr_gpio)					\
> +#define AT91_GPIO_CHIP(name)						\
>  	{								\
>  		.chip = {						\
>  			.label		  = name,			\
> @@ -67,16 +69,16 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
>  			.set		  = at91_gpiolib_set,		\
>  			.dbg_show	  = at91_gpiolib_dbg_show,	\
>  			.to_irq		  = at91_gpiolib_to_irq,	\
> -			.ngpio		  = nr_gpio,			\
> +			.ngpio		  = MAX_NB_GPIO_PER_BANK,	\
>  		},							\
>  	}
>  
>  static struct at91_gpio_chip gpio_chip[] = {
> -	AT91_GPIO_CHIP("pioA", 32),
> -	AT91_GPIO_CHIP("pioB", 32),
> -	AT91_GPIO_CHIP("pioC", 32),
> -	AT91_GPIO_CHIP("pioD", 32),
> -	AT91_GPIO_CHIP("pioE", 32),
> +	AT91_GPIO_CHIP("pioA"),
> +	AT91_GPIO_CHIP("pioB"),
> +	AT91_GPIO_CHIP("pioC"),
> +	AT91_GPIO_CHIP("pioD"),
> +	AT91_GPIO_CHIP("pioE"),
>  };
>  
>  static int gpio_banks;
> @@ -91,7 +93,7 @@ static unsigned long at91_gpio_caps;
>  
>  static inline void __iomem *pin_to_controller(unsigned pin)
>  {
> -	pin /= 32;
> +	pin /= MAX_NB_GPIO_PER_BANK;
>  	if (likely(pin < gpio_banks))
>  		return gpio_chip[pin].regbase;
>  
> @@ -100,7 +102,7 @@ static inline void __iomem *pin_to_controller(unsigned pin)
>  
>  static inline unsigned pin_to_mask(unsigned pin)
>  {
> -	return 1 << (pin % 32);
> +	return 1 << (pin % MAX_NB_GPIO_PER_BANK);
>  }
>  
>  
> @@ -998,6 +1000,7 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
>  {
>  	int alias_idx;
>  	struct at91_gpio_chip *at91_gpio;
> +	uint32_t ngpio;
>  
>  	if (!np)
>  		return;
> @@ -1010,7 +1013,7 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
>  	}
>  
>  	at91_gpio = &gpio_chip[alias_idx];
> -	at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio;
> +	at91_gpio->chip.base = alias_idx * MAX_NB_GPIO_PER_BANK;
>  
>  	at91_gpio->regbase = of_iomap(np, 0);
>  	if (!at91_gpio->regbase) {
> @@ -1030,6 +1033,14 @@ static void __init of_at91_gpio_init_one(struct device_node *np)
>  	if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
>  		at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
>  
> +	if (!of_property_read_u32(np, "gpio-nb", &ngpio)) {
> +		if (ngpio >= MAX_NB_GPIO_PER_BANK)
> +			pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
> +			       alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK);
> +		else
> +			at91_gpio->chip.ngpio = ngpio;
> +	}
> +
>  	/* Setup clock */
>  	if (at91_gpio_setup_clk(alias_idx))
>  		goto ioremap_err;
> @@ -1067,7 +1078,7 @@ static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
>  {
>  	struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
>  
> -	at91_gpio->chip.base = idx * at91_gpio->chip.ngpio;
> +	at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK;
>  	at91_gpio->pioc_hwirq = pioc_hwirq;
>  	at91_gpio->pioc_idx = idx;

Otherwise, I like it: so please resend it with corrections.

Bye,
-- 
Nicolas Ferre

[PATCH 1/4] ARM: at91: gpio: implement request

[Nicolas Ferre]

On 07/15/2012 03:40 PM, Jean-Christophe PLAGNIOL-VILLARD :
> confire the pin as pio when requested
> 
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/mach-at91/gpio.c |   14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
> index 325837a..994ed02 100644
> --- a/arch/arm/mach-at91/gpio.c
> +++ b/arch/arm/mach-at91/gpio.c
> @@ -44,6 +44,7 @@ struct at91_gpio_chip {
>  
>  #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
>  
> +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
>  static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
>  static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
>  static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
> @@ -57,6 +58,7 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
>  	{								\
>  		.chip = {						\
>  			.label		  = name,			\
> +			.request	  = at91_gpiolib_request,	\
>  			.direction_input  = at91_gpiolib_direction_input, \
>  			.direction_output = at91_gpiolib_direction_output, \
>  			.get		  = at91_gpiolib_get,		\
> @@ -861,6 +863,18 @@ void __init at91_gpio_irq_setup(void)
>  }
>  
>  /* gpiolib support */
> +
> +
> +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
> +	void __iomem *pio = at91_gpio->regbase;
> +	unsigned mask = 1 << offset;
> +
> +	__raw_writel(mask, pio + PIO_PER);
> +	return 0;
> +}
> +
>  static int at91_gpiolib_direction_input(struct gpio_chip *chip,
>  					unsigned offset)
>  {
> 


-- 
Nicolas Ferre

[PULL] [PATCH 0/4] arm: at91: gpio fix

[Olof Johansson]

Hi Jean-Christophe,

Comments below. As I mentioned in the SPEAr pull request just now, we
are very close to final 3.5, so only fixes to bugs should go in.
Please help me out a bit below.

On Sun, Jul 15, 2012 at 6:16 AM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:

> Jean-Christophe PLAGNIOL-VILLARD (4):
>       ARM: at91: gpio: implement request
>       ARM: at91: gpio: implement gpio_free

Are the two above regressions, or just general improvement? Looks like
the latter to me?

>       at91: regroup gpio and pinctrl under a simple-bus

This looks like a cleanup patch to me. I'm also not sure that this is
appropriate use of a simple-bus. The patch seems to have been posted
for review the same day as you sent the pull request, and not cc:d to
devicetree-discuss.

>       arm: at91: at91sam9x5: fix gpio number per bank

Ok, this one I can believe is a proper fix.

So, please let me know if I should just cherry-pick in the last patch
and include that in the last 3.5 pull request, or if you want to
respin the branch. Also, if any of the other patches are truly 3.5
material, I'd like to hear a bit more motivation as to why.


Thanks!


-Olof

[PULL] [PATCH 0/4] arm: at91: gpio fix

[Jean-Christophe PLAGNIOL-VILLARD]

On 20:54 Tue 17 Jul     , Olof Johansson wrote:
> Hi Jean-Christophe,
> 
> Comments below. As I mentioned in the SPEAr pull request just now, we
> are very close to final 3.5, so only fixes to bugs should go in.
> Please help me out a bit below.
> 
> On Sun, Jul 15, 2012 at 6:16 AM, Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> wrote:
> 
> > Jean-Christophe PLAGNIOL-VILLARD (4):
> >       ARM: at91: gpio: implement request
> >       ARM: at91: gpio: implement gpio_free
> 
> Are the two above regressions, or just general improvement? Looks like
> the latter to me?
On non dt I agree but on DT the gpio are not mux in the kernel.
Today it work if the bootloader mux it as gpio so the kernel work onther wise BUG

and this is the case today
> 
> >       at91: regroup gpio and pinctrl under a simple-bus
> 
> This looks like a cleanup patch to me. I'm also not sure that this is
> appropriate use of a simple-bus. The patch seems to have been posted
> for review the same day as you sent the pull request, and not cc:d to
> devicetree-discuss.
forget to cc the devicetree but on at91 the pintcrl and gpio use the same
registers so you must you the simple-bus

As I've a huge patch series that I'm finishing to fix after found this bug on
the gpio it really help to do not rebase it

Best Regards,
J.

[PULL] [PATCH 0/4] arm: at91: gpio fix

[Olof Johansson]

On Tue, Jul 17, 2012 at 10:23 PM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
> On 20:54 Tue 17 Jul     , Olof Johansson wrote:
>> Hi Jean-Christophe,
>>
>> Comments below. As I mentioned in the SPEAr pull request just now, we
>> are very close to final 3.5, so only fixes to bugs should go in.
>> Please help me out a bit below.
>>
>> On Sun, Jul 15, 2012 at 6:16 AM, Jean-Christophe PLAGNIOL-VILLARD
>> <plagnioj@jcrosoft.com> wrote:
>>
>> > Jean-Christophe PLAGNIOL-VILLARD (4):
>> >       ARM: at91: gpio: implement request
>> >       ARM: at91: gpio: implement gpio_free
>>
>> Are the two above regressions, or just general improvement? Looks like
>> the latter to me?
> On non dt I agree but on DT the gpio are not mux in the kernel.
> Today it work if the bootloader mux it as gpio so the kernel work onther wise BUG
>
> and this is the case today

Ok, thanks -- that makes sense. Care to roll those two patches into
one and document that in the commit message?

>>
>> >       at91: regroup gpio and pinctrl under a simple-bus
>>
>> This looks like a cleanup patch to me. I'm also not sure that this is
>> appropriate use of a simple-bus. The patch seems to have been posted
>> for review the same day as you sent the pull request, and not cc:d to
>> devicetree-discuss.
> forget to cc the devicetree but on at91 the pintcrl and gpio use the same
> registers so you must you the simple-bus
>
> As I've a huge patch series that I'm finishing to fix after found this bug on
> the gpio it really help to do not rebase it

Defining the same device twice to have two drivers bind to it doesn't
seem like the right solution here. That patch needs an acked-by from
Rob Herring or Grant Likely before we pick it up. Existing device
trees don't include the pinctrl nodes, so this is 3.6 material as far
as I can tell.


-Olof

[PULL] [PATCH 0/4] arm: at91: gpio fix

[Jean-Christophe PLAGNIOL-VILLARD]

On 22:41 Tue 17 Jul     , Olof Johansson wrote:
> On Tue, Jul 17, 2012 at 10:23 PM, Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> wrote:
> > On 20:54 Tue 17 Jul     , Olof Johansson wrote:
> >> Hi Jean-Christophe,
> >>
> >> Comments below. As I mentioned in the SPEAr pull request just now, we
> >> are very close to final 3.5, so only fixes to bugs should go in.
> >> Please help me out a bit below.
> >>
> >> On Sun, Jul 15, 2012 at 6:16 AM, Jean-Christophe PLAGNIOL-VILLARD
> >> <plagnioj@jcrosoft.com> wrote:
> >>
> >> > Jean-Christophe PLAGNIOL-VILLARD (4):
> >> >       ARM: at91: gpio: implement request
> >> >       ARM: at91: gpio: implement gpio_free
> >>
> >> Are the two above regressions, or just general improvement? Looks like
> >> the latter to me?
> > On non dt I agree but on DT the gpio are not mux in the kernel.
> > Today it work if the bootloader mux it as gpio so the kernel work onther wise BUG
> >
> > and this is the case today
> 
> Ok, thanks -- that makes sense. Care to roll those two patches into
> one and document that in the commit message?
no so much honestly as you wish
> 
> >>
> >> >       at91: regroup gpio and pinctrl under a simple-bus
> >>
> >> This looks like a cleanup patch to me. I'm also not sure that this is
> >> appropriate use of a simple-bus. The patch seems to have been posted
> >> for review the same day as you sent the pull request, and not cc:d to
> >> devicetree-discuss.
> > forget to cc the devicetree but on at91 the pintcrl and gpio use the same
> > registers so you must you the simple-bus
> >
> > As I've a huge patch series that I'm finishing to fix after found this bug on
> > the gpio it really help to do not rebase it
> 
> Defining the same device twice to have two drivers bind to it doesn't
> seem like the right solution here. That patch needs an acked-by from
> Rob Herring or Grant Likely before we pick it up. Existing device
> trees don't include the pinctrl nodes, so this is 3.6 material as far
> as I can tell.
that's why I'm rewriting the pinctrl and gpio as one driver only

but we need the simple bus to describe it as done on other SoC Imx as example

so Rob can we have the ack to avoid to re-write about 20 patches that touch
the dts of all the at91 socs

Best Regards,
J.

[PULL] [PATCH 0/4] arm: at91: gpio fix

[Olof Johansson]

On Wed, Jul 18, 2012 at 3:57 AM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
> On 22:41 Tue 17 Jul     , Olof Johansson wrote:
>> On Tue, Jul 17, 2012 at 10:23 PM, Jean-Christophe PLAGNIOL-VILLARD
>> <plagnioj@jcrosoft.com> wrote:
>> > On 20:54 Tue 17 Jul     , Olof Johansson wrote:
>> >> Hi Jean-Christophe,
>> >>
>> >> Comments below. As I mentioned in the SPEAr pull request just now, we
>> >> are very close to final 3.5, so only fixes to bugs should go in.
>> >> Please help me out a bit below.
>> >>
>> >> On Sun, Jul 15, 2012 at 6:16 AM, Jean-Christophe PLAGNIOL-VILLARD
>> >> <plagnioj@jcrosoft.com> wrote:
>> >>
>> >> > Jean-Christophe PLAGNIOL-VILLARD (4):
>> >> >       ARM: at91: gpio: implement request
>> >> >       ARM: at91: gpio: implement gpio_free
>> >>
>> >> Are the two above regressions, or just general improvement? Looks like
>> >> the latter to me?
>> > On non dt I agree but on DT the gpio are not mux in the kernel.
>> > Today it work if the bootloader mux it as gpio so the kernel work onther wise BUG
>> >
>> > and this is the case today
>>
>> Ok, thanks -- that makes sense. Care to roll those two patches into
>> one and document that in the commit message?
> no so much honestly as you wish
>>
>> >>
>> >> >       at91: regroup gpio and pinctrl under a simple-bus
>> >>
>> >> This looks like a cleanup patch to me. I'm also not sure that this is
>> >> appropriate use of a simple-bus. The patch seems to have been posted
>> >> for review the same day as you sent the pull request, and not cc:d to
>> >> devicetree-discuss.
>> > forget to cc the devicetree but on at91 the pintcrl and gpio use the same
>> > registers so you must you the simple-bus
>> >
>> > As I've a huge patch series that I'm finishing to fix after found this bug on
>> > the gpio it really help to do not rebase it
>>
>> Defining the same device twice to have two drivers bind to it doesn't
>> seem like the right solution here. That patch needs an acked-by from
>> Rob Herring or Grant Likely before we pick it up. Existing device
>> trees don't include the pinctrl nodes, so this is 3.6 material as far
>> as I can tell.
> that's why I'm rewriting the pinctrl and gpio as one driver only
>
> but we need the simple bus to describe it as done on other SoC Imx as example
>
> so Rob can we have the ack to avoid to re-write about 20 patches that touch
> the dts of all the at91 socs


I'm sending in the last batch of fixes for 3.5 without this branch in
it. It's also getting too late to get them into 3.6 at this time since
the merge window is about to open and all code should already be in
arm-soc.

Jean-Christophe, when you've had a chance to clean up this branch and
get it ready for upstream merging, please mark the patches for stable
as appropriate to get them into 3.5.x.


-Olof