* ethtool 3.5 released
@ 2012-08-03 19:48 Ben Hutchings
2012-08-06 1:27 ` Naoto MATSUMOTO
0 siblings, 1 reply; 4+ messages in thread
From: Ben Hutchings @ 2012-08-03 19:48 UTC (permalink / raw)
To: netdev
[-- Attachment #1: Type: text/plain, Size: 795 bytes --]
ethtool version 3.5 has been released.
Home page: https://ftp.kernel.org/pub/software/network/ethtool/
Download link:
https://ftp.kernel.org/pub/software/network/ethtool/ethtool-3.1.tar.gz
Release notes:
* Feature: Display support for 1000BASE-KX and 10GBASE-KX4 link modes
* Feature: Energy-Efficient Ethernet (EEE) configuration
(--show-eee and --set-eee options)
* Fix: Don't trust drivers to null-terminate strings
* Feature: Display support for 40G link modes
* Package: Update RPM summary, description and URL
* Package: Exclude redundant documentation from RPM
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 490 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ethtool 3.5 released
2012-08-03 19:48 ethtool 3.5 released Ben Hutchings
@ 2012-08-06 1:27 ` Naoto MATSUMOTO
2012-08-06 16:41 ` Ben Hutchings
0 siblings, 1 reply; 4+ messages in thread
From: Naoto MATSUMOTO @ 2012-08-06 1:27 UTC (permalink / raw)
To: Ben Hutchings; +Cc: netdev
Dear Ben.
FYI(For Your Information)
This is Naoto MATSUMOTO, Senior Researcher, SAKURA Internet.
We tried ethtool 3.5 on 40GbE NIC(Mellanox), it's result here.
-----------------------------------------------------------------------
# ./ethtool --version
ethtool version 3.5
# ./ethtool eth1
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Advertised link modes: 10000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Speed: 40000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
MDI-X: Unknown
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
Our 40GbE NIC Firmware/Dirver status are here.
-----------------------------------------------------------------------
Mellanox ConnectX HCA Ethernet driver v1.5.8.3 (June 2012)
Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3]
Firmware Version: 2.10.800
-----------------------------------------------------------------------
And We were testing 10GbE(Intel) NIC and your 40GbE NIC in our lab
using ethtool with added some debug code.
-----------------------------------------------------------------------
# ./ethtool-p eth5 (10GbE NIC by Intel)
Settings for eth5:
Supported ports: [ FIBRE ]
Supported link modes: 10000baseT/Full
mask == 5120 <--- ep->support number
# ./ethtool-p eth1 (40GbE NIC by Mellanox)
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10000baseT/Full
mask == 4224 <--- ep->support number
-----------------------------------------------------------------------
It's firmware problem I thinks. But Just Information for you ;-)
regards,
--
Naoto MATSUMOTO
On Fri, 3 Aug 2012 20:48:37 +0100
Ben Hutchings <bhutchings@solarflare.com> wrote:
> ethtool version 3.5 has been released.
>
> Home page: https://ftp.kernel.org/pub/software/network/ethtool/
> Download link:
> https://ftp.kernel.org/pub/software/network/ethtool/ethtool-3.1.tar.gz
>
> Release notes:
>
> * Feature: Display support for 40G link modes
--
SAKURA Internet Inc. / Senior Researcher
Naoto MATSUMOTO <n-matsumoto@sakura.ad.jp>
SAKURA Research Center <http://research.sakura.ad.jp/>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: ethtool 3.5 released
2012-08-06 1:27 ` Naoto MATSUMOTO
@ 2012-08-06 16:41 ` Ben Hutchings
2012-08-07 1:36 ` Re[2]: " Naoto MATSUMOTO
0 siblings, 1 reply; 4+ messages in thread
From: Ben Hutchings @ 2012-08-06 16:41 UTC (permalink / raw)
To: Naoto MATSUMOTO; +Cc: netdev
On Mon, 2012-08-06 at 10:27 +0900, Naoto MATSUMOTO wrote:
> Dear Ben.
>
> FYI(For Your Information)
> This is Naoto MATSUMOTO, Senior Researcher, SAKURA Internet.
>
> We tried ethtool 3.5 on 40GbE NIC(Mellanox), it's result here.
> -----------------------------------------------------------------------
> # ./ethtool --version
> ethtool version 3.5
>
> # ./ethtool eth1
> Settings for eth1:
> Supported ports: [ TP ]
> Supported link modes: 10000baseT/Full
> Supported pause frame use: No
> Supports auto-negotiation: No
> Advertised link modes: 10000baseT/Full
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Speed: 40000Mb/s
> Duplex: Full
> Port: Twisted Pair
40G twisted-pair, eh?
> PHYAD: 0
> Transceiver: internal
> Auto-negotiation: off
> MDI-X: Unknown
> Supports Wake-on: d
> Wake-on: d
> Current message level: 0x00000014 (20)
> link ifdown
> Link detected: yes
>
>
> Our 40GbE NIC Firmware/Dirver status are here.
> -----------------------------------------------------------------------
> Mellanox ConnectX HCA Ethernet driver v1.5.8.3 (June 2012)
> Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3]
> Firmware Version: 2.10.800
> -----------------------------------------------------------------------
>
>
> And We were testing 10GbE(Intel) NIC and your 40GbE NIC in our lab
> using ethtool with added some debug code.
I work for Solarflare, not Mellanox... and the patch adding 40G link
modes came from Parav Pandit at Emulex.
[...]
> It's firmware problem I thinks. But Just Information for you ;-)
Also, the 40G link mode flags were only just defined, so the driver
probably has yet to be updated.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re[2]: ethtool 3.5 released
2012-08-06 16:41 ` Ben Hutchings
@ 2012-08-07 1:36 ` Naoto MATSUMOTO
0 siblings, 0 replies; 4+ messages in thread
From: Naoto MATSUMOTO @ 2012-08-07 1:36 UTC (permalink / raw)
To: Ben Hutchings; +Cc: netdev
Hi, Ben. Thanks your reply for me.
On Mon, 6 Aug 2012 17:41:23 +0100
Ben Hutchings <bhutchings@solarflare.com> wrote:
> > Port: Twisted Pair
>
> 40G twisted-pair, eh?
We are using this one(cable).
http://www.mellanox.com/content/pages.php?pg=cables
> > PHYAD: 0
> > Transceiver: internal
> > Auto-negotiation: off
> > MDI-X: Unknown
> > Supports Wake-on: d
> > Wake-on: d
> > Current message level: 0x00000014 (20)
> > link ifdown
> > Link detected: yes
> >
> >
> > Our 40GbE NIC Firmware/Dirver status are here.
> > -----------------------------------------------------------------------
> > Mellanox ConnectX HCA Ethernet driver v1.5.8.3 (June 2012)
> > Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3]
> > Firmware Version: 2.10.800
> > -----------------------------------------------------------------------
> >
> >
> > And We were testing 10GbE(Intel) NIC and your 40GbE NIC in our lab
> > using ethtool with added some debug code.
>
> I work for Solarflare, not Mellanox... and the patch adding 40G link
> modes came from Parav Pandit at Emulex.
>
> [...]
> > It's firmware problem I thinks. But Just Information for you ;-)
>
> Also, the 40G link mode flags were only just defined, so the driver
> probably has yet to be updated.
>
> Ben.
I agree with you. and we'll wait for the MLX_GUY works ;-)
--
SAKURA Internet Inc. / Senior Researcher
Naoto MATSUMOTO <n-matsumoto@sakura.ad.jp>
SAKURA Research Center <http://research.sakura.ad.jp/>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-08-07 1:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-08-03 19:48 ethtool 3.5 released Ben Hutchings
2012-08-06 1:27 ` Naoto MATSUMOTO
2012-08-06 16:41 ` Ben Hutchings
2012-08-07 1:36 ` Re[2]: " Naoto MATSUMOTO
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.