[U-Boot] [PATCH v2 0/18] ARM: SPL: Make more generic, merge DaVinci and OMAP

[U-Boot] [PATCH v2 0/18] ARM: SPL: Make more generic, merge DaVinci and OMAP

[Tom Rini]

Hey all,

The following patch series merges the davinci and omap-common SPL
frameworks into a single framework, CONFIG_SPL_FRAMEWORK along with a
few small cleanups to the code to make it a little smaller and more
flexible.  The end result is that davinci can now opt in on
SPL-boots-Linux by just setting the right defines and other platforms
would just need to adapt to this framework.  In my testing, davinci
gains between 300 and 700 bytes for this (not enabling the SPL OS
feature) and omap4/5/etc lose just a little bit (from the printf->puts
changes).  I've tested this on omap3_beagle (xM and classic) and
omap4_panda.  I don't have any davinci platforms that were previously
using SPL so I can't boot-test those changes but since everyone sets
CONFIG_SPL_MAX_SIZE, we're OK in that department.

To make this series easier to test I've placed it on
http://github.com/trini/u-boot WIP/spl-improvements

I've looked a little into re-reducing the size and the biggest problem I
see is that SPI a lot of informational prints that we don't need,
strictly speaking, but are nice in a normal U-Boot context.  I'm unsure
of the best way to quiet these as I don't like the idea of sprinkling
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303 and I'm sending
another email to discuss that.

Oh, and I've switched to using patman for this series now, please let me know
if I made the tool do something silly :)

--
Tom

Changes in v2:
- Add CONFIG_SYS_SPL_MALLOC_START / SIZE defines from Christian Riesch
- Add arch/arm/cpu/arm926ejs/davinci/config.mk to build u-boot.ais
- Fix checkpatch warning (u32* boot_params_ptr -> u32 *boot_params_ptr)
- Place files into common/spl (due to gcc bug #54303) and include/spl.h
- Reorder all of the patches that used to follow this to precede.

Tom Rini (18):
  Makefile: Move SPL files to clobber, remove from clean
  spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
  omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
  omap-common: Fix typo in save_boot_params() in lowlevel_init.S
  ARM: SPL: Rename omap_boot_device to spl_boot_device
  ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
  ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
  ARM: SPL: Only call mem_malloc_init if configured
  ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
  ARM: SPL: Make spl_mmc.c more generic
  ARM: SPL: Clean up spl.c / spl_nand.c slightly
  ARM: SPL: Start hooking in the current SPI SPL support
  ARM: SPL: Move gpmc_init() to spl_board_init()
  SPL: Move the omap SPL framework to common/spl
  ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
  da850_am18xxevm: Add README.da850_am18xxevm
  SPL: Enhance drivers/mtd/nand/nand_spl_load.c
  SPL: Enhance spi_spl_load to match the other load functions

 Makefile                                           |   12 +--
 README                                             |    9 ++
 arch/arm/cpu/arm926ejs/davinci/config.mk           |   16 +++
 arch/arm/cpu/arm926ejs/davinci/spl.c               |   47 ++-------
 arch/arm/cpu/armv7/am33xx/board.c                  |    2 +-
 arch/arm/cpu/armv7/omap-common/Makefile            |   13 ---
 arch/arm/cpu/armv7/omap-common/boot-common.c       |   27 ++++-
 arch/arm/cpu/armv7/omap-common/hwinit-common.c     |    7 +-
 arch/arm/cpu/armv7/omap-common/lowlevel_init.S     |    6 +-
 arch/arm/cpu/armv7/omap-common/spl_nand.c          |  111 --------------------
 arch/arm/cpu/armv7/omap3/board.c                   |   28 +++--
 arch/arm/include/asm/arch-am33xx/spl.h             |   31 ++++++
 arch/arm/include/asm/arch-davinci/spl.h            |   28 +++++
 arch/arm/include/asm/arch-omap3/spl.h              |   34 ++++++
 arch/arm/include/asm/arch-omap4/spl.h              |   35 ++++++
 arch/arm/include/asm/arch-omap4/sys_proto.h        |    1 -
 arch/arm/include/asm/arch-omap5/spl.h              |   35 ++++++
 arch/arm/include/asm/arch-omap5/sys_proto.h        |    1 -
 arch/arm/include/asm/omap_common.h                 |   77 --------------
 arch/arm/include/asm/spl.h                         |   29 +++++
 board/davinci/da8xxevm/README.da850_am18xxevm      |   53 ++++++++++
 board/overo/overo.c                                |   10 --
 common/spl/Makefile                                |   37 +++++++
 .../arm/cpu/armv7/omap-common => common/spl}/spl.c |   43 ++++----
 .../armv7/omap-common => common/spl}/spl_ymodem.c  |    3 +-
 doc/README.SPL                                     |    1 -
 drivers/mmc/Makefile                               |    5 +
 .../armv7/omap-common => drivers/mmc}/spl_mmc.c    |   24 ++---
 drivers/mtd/nand/Makefile                          |    7 +-
 drivers/mtd/nand/nand_spl_load.c                   |   89 +++++++++++-----
 drivers/mtd/spi/spi_spl_load.c                     |   23 ++--
 include/configs/am335x_evm.h                       |    1 +
 include/configs/am3517_crane.h                     |    2 +
 include/configs/am3517_evm.h                       |    2 +
 include/configs/cam_enc_4xx.h                      |    3 +-
 include/configs/da850evm.h                         |    5 +
 include/configs/devkit8000.h                       |    1 +
 include/configs/hawkboard.h                        |    3 +-
 include/configs/mcx.h                              |    2 +
 include/configs/omap3_beagle.h                     |    1 +
 include/configs/omap3_evm_common.h                 |    1 +
 include/configs/omap3_overo.h                      |    1 +
 include/configs/omap4_common.h                     |    2 +
 include/configs/omap5_evm.h                        |    2 +
 include/configs/tam3517-common.h                   |    2 +
 include/configs/tricorder.h                        |    1 +
 include/spl.h                                      |   69 ++++++++++++
 spl/Makefile                                       |    1 +
 48 files changed, 588 insertions(+), 355 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/davinci/config.mk
 delete mode 100644 arch/arm/cpu/armv7/omap-common/spl_nand.c
 create mode 100644 arch/arm/include/asm/arch-am33xx/spl.h
 create mode 100644 arch/arm/include/asm/arch-davinci/spl.h
 create mode 100644 arch/arm/include/asm/arch-omap3/spl.h
 create mode 100644 arch/arm/include/asm/arch-omap4/spl.h
 create mode 100644 arch/arm/include/asm/arch-omap5/spl.h
 create mode 100644 arch/arm/include/asm/spl.h
 create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
 create mode 100644 common/spl/Makefile
 rename {arch/arm/cpu/armv7/omap-common => common/spl}/spl.c (87%)
 rename {arch/arm/cpu/armv7/omap-common => common/spl}/spl_ymodem.c (96%)
 rename {arch/arm/cpu/armv7/omap-common => drivers/mmc}/spl_mmc.c (91%)
 create mode 100644 include/spl.h

-- 
1.7.9.5

[U-Boot] [PATCH v2 01/18] Makefile: Move SPL files to clobber, remove from clean

[Tom Rini]

The 'clean' target has been removing all of spl but not u-boot itself.
For consistency and ease of testing, only remove SPL binaries / maps in
the clobber target, just like for full U-Boot

Signed-off-by: Tom Rini <trini@ti.com>
---

 Makefile |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Makefile b/Makefile
index 73c8e39..57bb0b9 100644
--- a/Makefile
+++ b/Makefile
@@ -763,12 +763,6 @@ clean:
 	@rm -f $(obj)lib/asm-offsets.s
 	@rm -f $(obj)include/generated/asm-offsets.h
 	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
-	@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
-	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
-	@rm -f $(ONENAND_BIN)
-	@rm -f $(obj)onenand_ipl/u-boot.lds
-	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
-	@rm -f $(obj)MLO
 	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
@@ -793,6 +787,12 @@ clobber:	tidy
 	@rm -f $(obj)u-boot.dtb
 	@rm -f $(obj)u-boot.sb
 	@rm -f $(obj)u-boot.spr
+	@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
+	@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
+	@rm -f $(ONENAND_BIN)
+	@rm -f $(obj)onenand_ipl/u-boot.lds
+	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
+	@rm -f $(obj)MLO
 	@rm -f $(obj)tools/xway-swap-bytes
 	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
 	@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
-- 
1.7.9.5

[U-Boot] [PATCH v2 02/18] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT

[Tom Rini]

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/spl_mmc.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap-common/spl_mmc.c b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
index 2f921bb..7552f6c 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_mmc.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
@@ -84,6 +84,7 @@ end:
 	}
 }
 
+#ifdef CONFIG_SPL_FAT_SUPPORT
 static void mmc_load_image_fat(struct mmc *mmc)
 {
 	s32 err;
@@ -116,6 +117,7 @@ end:
 		hang();
 	}
 }
+#endif
 
 void spl_mmc_load_image(void)
 {
@@ -140,9 +142,11 @@ void spl_mmc_load_image(void)
 	if (boot_mode == MMCSD_MODE_RAW) {
 		debug("boot mode - RAW\n");
 		mmc_load_image_raw(mmc);
+#ifdef CONFIG_SPL_FAT_SUPPORT
 	} else if (boot_mode == MMCSD_MODE_FAT) {
 		debug("boot mode - FAT\n");
 		mmc_load_image_fat(mmc);
+#endif
 	} else {
 		puts("spl: wrong MMC boot mode\n");
 		hang();
-- 
1.7.9.5

[U-Boot] [PATCH v2 03/18] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()

[Tom Rini]

Only omap4/5 currently have a meaningful set of display text and overo
had been adding a function to display nothing.  Change how this works to
be opt-in and only turned on for omap4/5 now.

Signed-off-by: Tom Rini <trini@ti.com>
---

 README                                         |    4 ++++
 arch/arm/cpu/armv7/omap-common/hwinit-common.c |    5 +++++
 arch/arm/cpu/armv7/omap-common/spl.c           |    9 +++------
 arch/arm/include/asm/arch-omap4/sys_proto.h    |    1 -
 arch/arm/include/asm/arch-omap5/sys_proto.h    |    1 -
 arch/arm/include/asm/omap_common.h             |    2 +-
 board/overo/overo.c                            |   10 ----------
 include/configs/omap4_common.h                 |    1 +
 include/configs/omap5_evm.h                    |    1 +
 9 files changed, 15 insertions(+), 19 deletions(-)

diff --git a/README b/README
index fb9d904..f1a12a5 100644
--- a/README
+++ b/README
@@ -2564,6 +2564,10 @@ FIT uImage format:
 		CONFIG_SYS_SPL_MALLOC_SIZE
 		The size of the malloc pool used in SPL.
 
+		CONFIG_SPL_DISPLAY_PRINT
+		For ARM, enable an optional function to print more information
+		about the running system.
+
 		CONFIG_SPL_LIBCOMMON_SUPPORT
 		Support for common/libcommon.o in SPL binary
 
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 459ebb5..4d7ef5c 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -92,6 +92,11 @@ static void init_boot_params(void)
 {
 	boot_params_ptr = (u32 *) &boot_params;
 }
+
+void spl_display_print(void)
+{
+	omap_rev_string();
+}
 #endif
 
 /*
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index 4d1ac85..b10832a 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -219,10 +219,7 @@ void preloader_console_init(void)
 
 	printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
 		U_BOOT_TIME);
-	omap_rev_string();
-}
-
-void __weak omap_rev_string()
-{
-	printf("Texas Instruments Revision detection unimplemented\n");
+#ifdef CONFIG_SPL_DISPLAY_PRINT
+	spl_display_print();
+#endif
 }
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index d633573..b48f81d 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -42,7 +42,6 @@ void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 void set_pl310_ctrl_reg(u32 val);
-void omap_rev_string(void);
 void setup_clocks_for_console(void);
 void prcm_init(void);
 void bypass_dpll(u32 *const base);
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 74feb90..72e9df7 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -42,7 +42,6 @@ void set_muxconf_regs_non_essential(void);
 void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
-void omap_rev_string(void);
 void setup_clocks_for_console(void);
 void prcm_init(void);
 void bypass_dpll(u32 *const base);
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 4e95eee..19df5ea 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -94,9 +94,9 @@ u32 omap_boot_mode(void);
 
 /* SPL common function s*/
 void spl_parse_image_header(const struct image_header *header);
-void omap_rev_string(void);
 void spl_board_prepare_for_linux(void);
 int spl_start_uboot(void);
+void spl_display_print(void);
 
 /* NAND SPL functions */
 void spl_nand_load_image(void);
diff --git a/board/overo/overo.c b/board/overo/overo.c
index f973870..c6d50a0 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -101,16 +101,6 @@ int board_init(void)
 }
 
 /*
- * Routine: omap_rev_string
- * Description: For SPL builds output board rev
- */
-#ifdef CONFIG_SPL_BUILD
-void omap_rev_string(void)
-{
-}
-#endif
-
-/*
  * Routine: get_board_revision
  * Description: Returns the board revision
  */
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 2192c2b..685fde9 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -249,6 +249,7 @@
 #define CONFIG_SPL_TEXT_BASE		0x40304350
 #define CONFIG_SPL_MAX_SIZE		(38 * 1024)
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+#define CONFIG_SPL_DISPLAY_PRINT
 
 /*
  * 64 bytes before this address should be set aside for u-boot.img's
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index c5874bb..ef4034c 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -246,6 +246,7 @@
 #define CONFIG_SPL_TEXT_BASE		0x40300350
 #define CONFIG_SPL_MAX_SIZE		0x19000	/* 100K */
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+#define CONFIG_SPL_DISPLAY_PRINT
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-- 
1.7.9.5

[U-Boot] [PATCH v2 04/18] omap-common: Fix typo in save_boot_params() in lowlevel_init.S

[Tom Rini]

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/lowlevel_init.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index ccc6bb6..48a296c 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -63,7 +63,7 @@ ENTRY(save_boot_params)
 	blt	2f
 	cmp	r2, #7
 	bgt	2f
-	/* Store the boot mode (raw/FAT) in omap_boot_mode */
+	/* Store the boot mode (raw/FAT) in omap_bootmode */
 	ldr	r2, [r0, #DEV_DESC_PTR_OFFSET]	@ get the device descriptor ptr
 	ldr	r2, [r2, #DEV_DATA_PTR_OFFSET]	@ get the pDeviceData ptr
 	ldr	r2, [r2, #BOOT_MODE_OFFSET]	@ get the boot mode
-- 
1.7.9.5

[U-Boot] [PATCH v2 05/18] ARM: SPL: Rename omap_boot_device to spl_boot_device

[Tom Rini]

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/boot-common.c   |    2 +-
 arch/arm/cpu/armv7/omap-common/lowlevel_init.S |    4 ++--
 arch/arm/cpu/armv7/omap-common/spl.c           |    2 +-
 arch/arm/cpu/armv7/omap-common/spl_mmc.c       |    2 +-
 arch/arm/cpu/armv7/omap3/board.c               |    4 ++--
 arch/arm/include/asm/omap_common.h             |    2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index f211f76..102a381 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -37,7 +37,7 @@ struct omap_boot_parameters boot_params __attribute__ ((section(".data")));
  */
 u32 omap_bootmode = MMCSD_MODE_FAT;
 
-u32 omap_boot_device(void)
+u32 spl_boot_device(void)
 {
 	return (u32) (boot_params.omap_bootdevice);
 }
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 48a296c..dafe18b 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -52,11 +52,11 @@ ENTRY(save_boot_params)
 	ldr	r1, =boot_params
 	str	r0, [r1]
 #ifdef CONFIG_SPL_BUILD
-	/* Store the boot device in omap_boot_device */
+	/* Store the boot device in spl_boot_device */
 	ldrb	r2, [r0, #BOOT_DEVICE_OFFSET]	@ r1 <- value of boot device
 	and	r2, #BOOT_DEVICE_MASK
 	ldr	r3, =boot_params
-	strb	r2, [r3, #BOOT_DEVICE_OFFSET]	@ omap_boot_device <- r1
+	strb	r2, [r3, #BOOT_DEVICE_OFFSET]	@ spl_boot_device <- r1
 
 	/* boot mode is passed only for devices that can raw/fat mode */
 	cmp	r2, #2
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index b10832a..4d33f99 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -156,7 +156,7 @@ void board_init_r(gd_t *id, ulong dummy)
 	spl_board_init();
 #endif
 
-	boot_device = omap_boot_device();
+	boot_device = spl_boot_device();
 	debug("boot device - %d\n", boot_device);
 	switch (boot_device) {
 #ifdef CONFIG_SPL_MMC_SUPPORT
diff --git a/arch/arm/cpu/armv7/omap-common/spl_mmc.c b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
index 7552f6c..3ad382b 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_mmc.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
@@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #ifdef CONFIG_GENERIC_MMC
 int board_mmc_init(bd_t *bis)
 {
-	switch (omap_boot_device()) {
+	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC1:
 		omap_mmc_init(0, 0, 0);
 		break;
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index f2e52e9..b4f4fee 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -71,7 +71,7 @@ u32 omap3_boot_device = BOOT_DEVICE_NAND;
 /* auto boot mode detection is not possible for OMAP3 - hard code */
 u32 omap_boot_mode(void)
 {
-	switch (omap_boot_device()) {
+	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC2:
 		return MMCSD_MODE_RAW;
 	case BOOT_DEVICE_MMC1:
@@ -86,7 +86,7 @@ u32 omap_boot_mode(void)
 	}
 }
 
-u32 omap_boot_device(void)
+u32 spl_boot_device(void)
 {
 	return omap3_boot_device;
 }
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 19df5ea..a3853ce 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -89,7 +89,7 @@ struct spl_image_info {
 extern struct spl_image_info spl_image;
 
 extern u32* boot_params_ptr;
-u32 omap_boot_device(void);
+u32 spl_boot_device(void);
 u32 omap_boot_mode(void);
 
 /* SPL common function s*/
-- 
1.7.9.5

[U-Boot] [PATCH v2 06/18] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()

[Tom Rini]

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/boot-common.c |    2 +-
 arch/arm/cpu/armv7/omap-common/spl_mmc.c     |    2 +-
 arch/arm/cpu/armv7/omap-common/spl_nand.c    |    2 +-
 arch/arm/cpu/armv7/omap3/board.c             |    2 +-
 arch/arm/include/asm/omap_common.h           |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 102a381..53568ac 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -42,7 +42,7 @@ u32 spl_boot_device(void)
 	return (u32) (boot_params.omap_bootdevice);
 }
 
-u32 omap_boot_mode(void)
+u32 spl_boot_mode(void)
 {
 	return omap_bootmode;
 }
diff --git a/arch/arm/cpu/armv7/omap-common/spl_mmc.c b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
index 3ad382b..62b308b 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_mmc.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
@@ -138,7 +138,7 @@ void spl_mmc_load_image(void)
 		printf("spl: mmc init failed: err - %d\n", err);
 		hang();
 	}
-	boot_mode = omap_boot_mode();
+	boot_mode = spl_boot_mode();
 	if (boot_mode == MMCSD_MODE_RAW) {
 		debug("boot mode - RAW\n");
 		mmc_load_image_raw(mmc);
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
index 8cf55c9..ea7cc8a 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_nand.c
@@ -35,7 +35,7 @@ void spl_nand_load_image(void)
 	int *src __attribute__((unused));
 	int *dst __attribute__((unused));
 
-	switch (omap_boot_mode()) {
+	switch (spl_boot_mode()) {
 	case NAND_MODE_HW_ECC:
 		debug("spl: nand - using hw ecc\n");
 		gpmc_init();
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index b4f4fee..1640696 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -69,7 +69,7 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
 u32 omap3_boot_device = BOOT_DEVICE_NAND;
 
 /* auto boot mode detection is not possible for OMAP3 - hard code */
-u32 omap_boot_mode(void)
+u32 spl_boot_mode(void)
 {
 	switch (spl_boot_device()) {
 	case BOOT_DEVICE_MMC2:
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index a3853ce..9ac0cc2 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -90,7 +90,7 @@ extern struct spl_image_info spl_image;
 
 extern u32* boot_params_ptr;
 u32 spl_boot_device(void);
-u32 omap_boot_mode(void);
+u32 spl_boot_mode(void);
 
 /* SPL common function s*/
 void spl_parse_image_header(const struct image_header *header);
-- 
1.7.9.5

[U-Boot] [PATCH v2 07/18] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c

[Tom Rini]

This detection code doesn't (and can't) do anything currently, so
remove.

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/spl_nand.c |   13 +++----------
 arch/arm/cpu/armv7/omap3/board.c          |    3 ---
 arch/arm/include/asm/omap_common.h        |    1 -
 3 files changed, 3 insertions(+), 14 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
index ea7cc8a..39221d5 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_nand.c
@@ -35,16 +35,9 @@ void spl_nand_load_image(void)
 	int *src __attribute__((unused));
 	int *dst __attribute__((unused));
 
-	switch (spl_boot_mode()) {
-	case NAND_MODE_HW_ECC:
-		debug("spl: nand - using hw ecc\n");
-		gpmc_init();
-		nand_init();
-		break;
-	default:
-		puts("spl: ERROR: This bootmode is not implemented - hanging");
-		hang();
-	}
+	debug("spl: nand - using hw ecc\n");
+	gpmc_init();
+	nand_init();
 
 	/*use CONFIG_SYS_TEXT_BASE as temporary storage area */
 	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 1640696..a487374 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -77,9 +77,6 @@ u32 spl_boot_mode(void)
 	case BOOT_DEVICE_MMC1:
 		return MMCSD_MODE_FAT;
 		break;
-	case BOOT_DEVICE_NAND:
-		return NAND_MODE_HW_ECC;
-		break;
 	default:
 		puts("spl: ERROR:  unknown device - can't select boot mode\n");
 		hang();
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 9ac0cc2..1e8f59b 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -76,7 +76,6 @@ void preloader_console_init(void);
 #define	MMCSD_MODE_UNDEFINED	0
 #define MMCSD_MODE_RAW		1
 #define MMCSD_MODE_FAT		2
-#define NAND_MODE_HW_ECC	3
 
 struct spl_image_info {
 	const char *name;
-- 
1.7.9.5

[U-Boot] [PATCH v2 08/18] ARM: SPL: Only call mem_malloc_init if configured

[Tom Rini]

We can only attempt to setup a malloc pool if
CONFIG_SYS_SPL_MALLOC_START is defined, and not all boards require it.
Make the call depend on the define.

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/spl.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index 4d33f99..71a467e 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -149,8 +149,10 @@ void board_init_r(gd_t *id, ulong dummy)
 	u32 boot_device;
 	debug(">>spl:board_init_r()\n");
 
+#ifdef CONFIG_SYS_SPL_MALLOC_START
 	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
 			CONFIG_SYS_SPL_MALLOC_SIZE);
+#endif
 
 #ifdef CONFIG_SPL_BOARD_INIT
 	spl_board_init();
-- 
1.7.9.5

[U-Boot] [PATCH v2 09/18] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>

[Tom Rini]

Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and
add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK.

Signed-off-by: Tom Rini <trini@ti.com>
---
Changes in v2:
- Fix checkpatch warning (u32* boot_params_ptr -> u32 *boot_params_ptr)

 arch/arm/cpu/armv7/am33xx/board.c              |    2 +-
 arch/arm/cpu/armv7/omap-common/hwinit-common.c |    2 +-
 arch/arm/cpu/armv7/omap-common/spl.c           |    2 +-
 arch/arm/cpu/armv7/omap-common/spl_mmc.c       |    1 +
 arch/arm/cpu/armv7/omap-common/spl_nand.c      |    2 +-
 arch/arm/cpu/armv7/omap-common/spl_ymodem.c    |    2 +-
 arch/arm/cpu/armv7/omap3/board.c               |    1 +
 arch/arm/include/asm/arch-am33xx/spl.h         |   31 +++++++++++
 arch/arm/include/asm/arch-omap3/spl.h          |   34 ++++++++++++
 arch/arm/include/asm/arch-omap4/spl.h          |   35 ++++++++++++
 arch/arm/include/asm/arch-omap5/spl.h          |   35 ++++++++++++
 arch/arm/include/asm/omap_common.h             |   71 ------------------------
 arch/arm/include/asm/spl.h                     |   61 ++++++++++++++++++++
 13 files changed, 203 insertions(+), 76 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-am33xx/spl.h
 create mode 100644 arch/arm/include/asm/arch-omap3/spl.h
 create mode 100644 arch/arm/include/asm/arch-omap4/spl.h
 create mode 100644 arch/arm/include/asm/arch-omap5/spl.h
 create mode 100644 arch/arm/include/asm/spl.h

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 71309a7..fadc6e7 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -25,7 +25,7 @@
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/common_def.h>
 #include <asm/io.h>
-#include <asm/omap_common.h>
+#include <asm/spl.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 4d7ef5c..d5fde38 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -31,7 +31,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
 #include <asm/emif.h>
-#include <asm/omap_common.h>
+#include <asm/spl.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index 71a467e..81991b2 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -23,6 +23,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <asm/spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
 #include <asm/arch/sys_proto.h>
@@ -30,7 +31,6 @@
 #include <mmc.h>
 #include <fat.h>
 #include <version.h>
-#include <asm/omap_common.h>
 #include <asm/arch/mmc_host_def.h>
 #include <i2c.h>
 #include <image.h>
diff --git a/arch/arm/cpu/armv7/omap-common/spl_mmc.c b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
index 62b308b..fe44538 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_mmc.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
@@ -23,6 +23,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <asm/spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
 #include <asm/arch/sys_proto.h>
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
index 39221d5..6552a5d 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_nand.c
@@ -21,13 +21,13 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <asm/spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <nand.h>
 #include <version.h>
-#include <asm/omap_common.h>
 
 void spl_nand_load_image(void)
 {
diff --git a/arch/arm/cpu/armv7/omap-common/spl_ymodem.c b/arch/arm/cpu/armv7/omap-common/spl_ymodem.c
index 47663f7..65565e3 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_ymodem.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_ymodem.c
@@ -26,11 +26,11 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <asm/spl.h>
 #include <xyzModem.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
 #include <asm/arch/sys_proto.h>
-#include <asm/omap_common.h>
 
 #define BUF_SIZE 1024
 
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index a487374..45976f9 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -39,6 +39,7 @@
 #include <asm/cache.h>
 #include <asm/armv7.h>
 #include <asm/arch/gpio.h>
+#include <asm/spl.h>
 #include <asm/omap_common.h>
 #include <i2c.h>
 #include <linux/compiler.h>
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
new file mode 100644
index 0000000..f25afe4
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_SPL_H_
+
+#define BOOT_DEVICE_NAND	5
+#define BOOT_DEVICE_MMC1	8
+#define BOOT_DEVICE_MMC2	0
+#define BOOT_DEVICE_UART	65
+#define BOOT_DEVICE_MMC2_2      0xFF
+#endif
diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h
new file mode 100644
index 0000000..404e16a
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap3/spl.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_SPL_H_
+
+#define BOOT_DEVICE_NONE	0
+#define BOOT_DEVICE_XIP		1
+#define BOOT_DEVICE_NAND	2
+#define BOOT_DEVICE_ONE_NAND	3
+#define BOOT_DEVICE_MMC2	5 /*emmc*/
+#define BOOT_DEVICE_MMC1	6
+#define BOOT_DEVICE_XIPWAIT	7
+#define BOOT_DEVICE_MMC2_2      0xFF
+#endif
diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h
new file mode 100644
index 0000000..cec84dc
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/spl.h
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_SPL_H_
+
+#define BOOT_DEVICE_NONE	0
+#define BOOT_DEVICE_XIP		1
+#define BOOT_DEVICE_XIPWAIT	2
+#define BOOT_DEVICE_NAND	3
+#define BOOT_DEVICE_ONE_NAND	4
+#define BOOT_DEVICE_MMC1	5
+#define BOOT_DEVICE_MMC2	6
+#define BOOT_DEVICE_MMC2_2	0xFF
+
+#endif
diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
new file mode 100644
index 0000000..d125c61
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/spl.h
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_SPL_H_
+
+#define BOOT_DEVICE_NONE        0
+#define BOOT_DEVICE_XIP         1
+#define BOOT_DEVICE_XIPWAIT     2
+#define BOOT_DEVICE_NAND        3
+#define BOOT_DEVICE_ONE_NAND    4
+#define BOOT_DEVICE_MMC1        5
+#define BOOT_DEVICE_MMC2        6
+#define BOOT_DEVICE_MMC2_2	7
+
+#endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 1e8f59b..775ab6c 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -34,82 +34,11 @@
 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL	2
 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH	3
 
-void preloader_console_init(void);
-
-/* Boot device */
-#ifdef CONFIG_OMAP54XX
-#define BOOT_DEVICE_NONE        0
-#define BOOT_DEVICE_XIP         1
-#define BOOT_DEVICE_XIPWAIT     2
-#define BOOT_DEVICE_NAND        3
-#define BOOT_DEVICE_ONE_NAND    4
-#define BOOT_DEVICE_MMC1        5
-#define BOOT_DEVICE_MMC2        6
-#define BOOT_DEVICE_MMC2_2	7
-#elif defined(CONFIG_OMAP44XX) /* OMAP4 */
-#define BOOT_DEVICE_NONE	0
-#define BOOT_DEVICE_XIP		1
-#define BOOT_DEVICE_XIPWAIT	2
-#define BOOT_DEVICE_NAND	3
-#define BOOT_DEVICE_ONE_NAND	4
-#define BOOT_DEVICE_MMC1	5
-#define BOOT_DEVICE_MMC2	6
-#define BOOT_DEVICE_MMC2_2	0xFF
-#elif defined(CONFIG_OMAP34XX)	/* OMAP3 */
-#define BOOT_DEVICE_NONE	0
-#define BOOT_DEVICE_XIP		1
-#define BOOT_DEVICE_NAND	2
-#define BOOT_DEVICE_ONE_NAND	3
-#define BOOT_DEVICE_MMC2	5 /*emmc*/
-#define BOOT_DEVICE_MMC1	6
-#define BOOT_DEVICE_XIPWAIT	7
-#define BOOT_DEVICE_MMC2_2      0xFF
-#elif defined(CONFIG_AM33XX)	/* AM33XX */
-#define BOOT_DEVICE_NAND	5
-#define BOOT_DEVICE_MMC1	8
-#define BOOT_DEVICE_MMC2	0
-#define BOOT_DEVICE_UART	65
-#define BOOT_DEVICE_MMC2_2      0xFF
-#endif
-
 /* Boot type */
 #define	MMCSD_MODE_UNDEFINED	0
 #define MMCSD_MODE_RAW		1
 #define MMCSD_MODE_FAT		2
 
-struct spl_image_info {
-	const char *name;
-	u8 os;
-	u32 load_addr;
-	u32 entry_point;
-	u32 size;
-};
-
-extern struct spl_image_info spl_image;
-
-extern u32* boot_params_ptr;
-u32 spl_boot_device(void);
-u32 spl_boot_mode(void);
-
-/* SPL common function s*/
-void spl_parse_image_header(const struct image_header *header);
-void spl_board_prepare_for_linux(void);
-int spl_start_uboot(void);
-void spl_display_print(void);
-
-/* NAND SPL functions */
-void spl_nand_load_image(void);
-
-/* MMC SPL functions */
-void spl_mmc_load_image(void);
-
-/* YMODEM SPL functions */
-void spl_ymodem_load_image(void);
-
-#ifdef CONFIG_SPL_BOARD_INIT
-void spl_board_init(void);
-#endif
-
 static inline u32 omap_revision(void)
 {
 	extern u32 *const omap_si_rev;
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
new file mode 100644
index 0000000..19e6c50
--- /dev/null
+++ b/arch/arm/include/asm/spl.h
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_ASM_SPL_H_
+#define	_ASM_SPL_H_
+
+/* Platform-specific defines */
+#include <asm/arch/spl.h>
+
+struct spl_image_info {
+	const char *name;
+	u8 os;
+	u32 load_addr;
+	u32 entry_point;
+	u32 size;
+};
+
+extern struct spl_image_info spl_image;
+extern u32 *boot_params_ptr;
+
+/* SPL common functions */
+void preloader_console_init(void);
+u32 spl_boot_device(void);
+u32 spl_boot_mode(void);
+void spl_parse_image_header(const struct image_header *header);
+void spl_board_prepare_for_linux(void);
+int spl_start_uboot(void);
+void spl_display_print(void);
+
+/* NAND SPL functions */
+void spl_nand_load_image(void);
+
+/* MMC SPL functions */
+void spl_mmc_load_image(void);
+
+/* YMODEM SPL functions */
+void spl_ymodem_load_image(void);
+
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void);
+#endif
+#endif
-- 
1.7.9.5

[U-Boot] [PATCH v2 10/18] ARM: SPL: Make spl_mmc.c more generic

[Tom Rini]

Move the default omap/related-centric board_mmc_init to
arch/arm/cpu/armv7/omap-common/boot-common.c and move the type defines
to <asm/spl.h>

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/boot-common.c |   16 ++++++++++++++++
 arch/arm/cpu/armv7/omap-common/spl_mmc.c     |   17 -----------------
 arch/arm/cpu/armv7/omap3/board.c             |   15 +++++++++++++++
 arch/arm/include/asm/omap_common.h           |    5 -----
 arch/arm/include/asm/spl.h                   |    5 +++++
 5 files changed, 36 insertions(+), 22 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 53568ac..3406cfb 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -17,8 +17,10 @@
  */
 
 #include <common.h>
+#include <asm/spl.h>
 #include <asm/omap_common.h>
 #include <asm/arch/omap.h>
+#include <asm/arch/mmc_host_def.h>
 
 /*
  * This is used to verify if the configuration header
@@ -46,4 +48,18 @@ u32 spl_boot_mode(void)
 {
 	return omap_bootmode;
 }
+
+int board_mmc_init(bd_t *bis)
+{
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+		omap_mmc_init(0, 0, 0);
+		break;
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		omap_mmc_init(1, 0, 0);
+		break;
+	}
+	return 0;
+}
 #endif
diff --git a/arch/arm/cpu/armv7/omap-common/spl_mmc.c b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
index fe44538..5c65ba5 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_mmc.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
@@ -30,27 +30,10 @@
 #include <mmc.h>
 #include <fat.h>
 #include <version.h>
-#include <asm/omap_common.h>
 #include <asm/arch/mmc_host_def.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	switch (spl_boot_device()) {
-	case BOOT_DEVICE_MMC1:
-		omap_mmc_init(0, 0, 0);
-		break;
-	case BOOT_DEVICE_MMC2:
-	case BOOT_DEVICE_MMC2_2:
-		omap_mmc_init(1, 0, 0);
-		break;
-	}
-	return 0;
-}
-#endif
-
 static void mmc_load_image_raw(struct mmc *mmc)
 {
 	u32 image_size_sectors, err;
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 45976f9..3d74f09 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -41,6 +41,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/spl.h>
 #include <asm/omap_common.h>
+#include <asm/arch/mmc_host_def.h>
 #include <i2c.h>
 #include <linux/compiler.h>
 
@@ -89,6 +90,20 @@ u32 spl_boot_device(void)
 	return omap3_boot_device;
 }
 
+int board_mmc_init(bd_t *bis)
+{
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+		omap_mmc_init(0, 0, 0);
+		break;
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		omap_mmc_init(1, 0, 0);
+		break;
+	}
+	return 0;
+}
+
 void spl_board_init(void)
 {
 #ifdef CONFIG_SPL_I2C_SUPPORT
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 775ab6c..2a40b89 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -34,11 +34,6 @@
 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL	2
 #define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH	3
 
-/* Boot type */
-#define	MMCSD_MODE_UNDEFINED	0
-#define MMCSD_MODE_RAW		1
-#define MMCSD_MODE_FAT		2
-
 static inline u32 omap_revision(void)
 {
 	extern u32 *const omap_si_rev;
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index 19e6c50..fdb78b5 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -26,6 +26,11 @@
 /* Platform-specific defines */
 #include <asm/arch/spl.h>
 
+/* Boot type */
+#define MMCSD_MODE_UNDEFINED	0
+#define MMCSD_MODE_RAW		1
+#define MMCSD_MODE_FAT		2
+
 struct spl_image_info {
 	const char *name;
 	u8 os;
-- 
1.7.9.5

[U-Boot] [PATCH v2 11/18] ARM: SPL: Clean up spl.c / spl_nand.c slightly

[Tom Rini]

- Remove includes we don't need
- Switch some printf statements to puts
- Convert some printf statements to debug, introduce new puts statements
  - In most cases saying just "No mkimage signature, assuming
    u-boot.bin" or similar is sufficient.  This also means the non-DEBUG
    case doesn't need printf, in the core of SPL.
  - The other case here is that PLAIN_VERSION provided what we wanted
    already, so just use it.

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/spl.c      |   23 ++++++++---------------
 arch/arm/cpu/armv7/omap-common/spl_nand.c |    1 -
 2 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index 81991b2..3a1029f 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -26,12 +26,9 @@
 #include <asm/spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
-#include <asm/arch/sys_proto.h>
 #include <nand.h>
-#include <mmc.h>
 #include <fat.h>
 #include <version.h>
-#include <asm/arch/mmc_host_def.h>
 #include <i2c.h>
 #include <image.h>
 #include <malloc.h>
@@ -78,8 +75,8 @@ void board_init_f(ulong dummy)
 #ifdef CONFIG_SPL_OS_BOOT
 __weak int spl_start_uboot(void)
 {
-	printf("SPL: Please implement spl_start_uboot() for your board\n");
-	printf("SPL: Direct Linux boot not active!\n");
+	puts("SPL: Please implement spl_start_uboot() for your board\n");
+	puts("SPL: Direct Linux boot not active!\n");
 	return 1;
 }
 #endif
@@ -99,9 +96,9 @@ void spl_parse_image_header(const struct image_header *header)
 			spl_image.name, spl_image.load_addr, spl_image.size);
 	} else {
 		/* Signature not found - assume u-boot.bin */
-		printf("mkimage signature not found - ih_magic = %x\n",
+		puts("mkimage signature not found, assuming u-boot.bin ..\n");
+		debug("mkimage signature not found - ih_magic = %x\n",
 			header->ih_magic);
-		debug("Assuming u-boot.bin ..\n");
 		/* Let's assume U-Boot will not be more than 200 KB */
 		spl_image.size = 200 * 1024;
 		spl_image.entry_point = CONFIG_SYS_TEXT_BASE;
@@ -179,7 +176,8 @@ void board_init_r(gd_t *id, ulong dummy)
 		break;
 #endif
 	default:
-		printf("SPL: Un-supported Boot Device - %d!!!\n", boot_device);
+		puts("SPL: Un-supported Boot Device\n");
+		debug("Found: %d\n", boot_device);
 		hang();
 		break;
 	}
@@ -205,8 +203,6 @@ void board_init_r(gd_t *id, ulong dummy)
 /* This requires UART clocks to be enabled */
 void preloader_console_init(void)
 {
-	const char *u_boot_rev = U_BOOT_VERSION;
-
 	gd = &gdata;
 	gd->bd = &bdata;
 	gd->flags |= GD_FLG_RELOC;
@@ -216,11 +212,8 @@ void preloader_console_init(void)
 
 	gd->have_console = 1;
 
-	/* Avoid a second "U-Boot" coming from this string */
-	u_boot_rev = &u_boot_rev[7];
-
-	printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
-		U_BOOT_TIME);
+	puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \
+			U_BOOT_TIME ")\n");
 #ifdef CONFIG_SPL_DISPLAY_PRINT
 	spl_display_print();
 #endif
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
index 6552a5d..3e2f359 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_nand.c
@@ -24,7 +24,6 @@
 #include <asm/spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
-#include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <nand.h>
 #include <version.h>
-- 
1.7.9.5

[U-Boot] [PATCH v2 12/18] ARM: SPL: Start hooking in the current SPI SPL support

[Tom Rini]

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/spl.c |    5 +++++
 arch/arm/include/asm/spl.h           |    3 +++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index 3a1029f..dc26750 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -175,6 +175,11 @@ void board_init_r(gd_t *id, ulong dummy)
 		spl_ymodem_load_image();
 		break;
 #endif
+#ifdef CONFIG_SPL_SPI_SUPPORT
+	case BOOT_DEVICE_SPI:
+		spi_boot();
+	break;
+#endif
 	default:
 		puts("SPL: Un-supported Boot Device\n");
 		debug("Found: %d\n", boot_device);
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index fdb78b5..47ca1b6 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -60,6 +60,9 @@ void spl_mmc_load_image(void);
 /* YMODEM SPL functions */
 void spl_ymodem_load_image(void);
 
+/* SPI SPL functions */
+void spi_boot(void);
+
 #ifdef CONFIG_SPL_BOARD_INIT
 void spl_board_init(void);
 #endif
-- 
1.7.9.5

[U-Boot] [PATCH v2 13/18] ARM: SPL: Move gpmc_init() to spl_board_init()

[Tom Rini]

This is an OMAP/related-specific function, move calling it to
spl_board_init() and turn on CONFIG_SPL_BOARD_INIT on the boards that
enabled NAND and didn't enable this already.

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/armv7/omap-common/boot-common.c |    7 +++++++
 arch/arm/cpu/armv7/omap-common/spl_nand.c    |    1 -
 arch/arm/cpu/armv7/omap3/board.c             |    3 +++
 include/configs/am3517_crane.h               |    1 +
 include/configs/am3517_evm.h                 |    1 +
 include/configs/mcx.h                        |    1 +
 include/configs/tam3517-common.h             |    1 +
 7 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 3406cfb..ed398fd 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -49,6 +49,13 @@ u32 spl_boot_mode(void)
 	return omap_bootmode;
 }
 
+void spl_board_init(void)
+{
+#ifdef CONFIG_SPL_NAND_SUPPORT
+	gpmc_init();
+#endif
+}
+
 int board_mmc_init(bd_t *bis)
 {
 	switch (spl_boot_device()) {
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
index 3e2f359..1e6b5f0 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_nand.c
@@ -35,7 +35,6 @@ void spl_nand_load_image(void)
 	int *dst __attribute__((unused));
 
 	debug("spl: nand - using hw ecc\n");
-	gpmc_init();
 	nand_init();
 
 	/*use CONFIG_SYS_TEXT_BASE as temporary storage area */
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 3d74f09..52196c8 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -106,6 +106,9 @@ int board_mmc_init(bd_t *bis)
 
 void spl_board_init(void)
 {
+#ifdef CONFIG_SPL_NAND_SUPPORT
+	gpmc_init();
+#endif
 #ifdef CONFIG_SPL_I2C_SUPPORT
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 #endif
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 54ab3eb..b312028 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -322,6 +322,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index ed0a601..ab2ddc0 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -321,6 +321,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 970c882..d9cfc10 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -309,6 +309,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SOFTECC
 
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 777f77c..e194b46 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -241,6 +241,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_CONSOLE
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SOFTECC
-- 
1.7.9.5

[U-Boot] [PATCH v2 14/18] SPL: Move the omap SPL framework to common/spl

[Tom Rini]

Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL
framework, enable on all of the previously using boards.  We move the
spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/.  We leave
the NAND one in-place as we plan to replace it later in this series.

We use common/spl to avoid linker problems with respect to merging
constant strings in objects.   Otherwise all strings in common/ will be
linked in and kept which grows SPL in size too much.

Signed-off-by: Tom Rini <trini@ti.com>
---
Changes in v2:
- Place files into common/spl (due to gcc bug #54303) and include/spl.h
- Reorder all of the patches that used to follow this to precede.

 README                                             |    5 ++
 arch/arm/cpu/armv7/am33xx/board.c                  |    2 +-
 arch/arm/cpu/armv7/omap-common/Makefile            |    7 --
 arch/arm/cpu/armv7/omap-common/boot-common.c       |    2 +-
 arch/arm/cpu/armv7/omap-common/hwinit-common.c     |    2 +-
 arch/arm/cpu/armv7/omap-common/spl_nand.c          |    2 +-
 arch/arm/cpu/armv7/omap3/board.c                   |    2 +-
 arch/arm/include/asm/spl.h                         |   40 ------------
 common/spl/Makefile                                |   37 +++++++++++
 .../arm/cpu/armv7/omap-common => common/spl}/spl.c |    2 +-
 .../armv7/omap-common => common/spl}/spl_ymodem.c  |    3 +-
 drivers/mmc/Makefile                               |    5 ++
 .../armv7/omap-common => drivers/mmc}/spl_mmc.c    |    2 +-
 include/configs/am335x_evm.h                       |    1 +
 include/configs/am3517_crane.h                     |    1 +
 include/configs/am3517_evm.h                       |    1 +
 include/configs/devkit8000.h                       |    1 +
 include/configs/mcx.h                              |    1 +
 include/configs/omap3_beagle.h                     |    1 +
 include/configs/omap3_evm_common.h                 |    1 +
 include/configs/omap3_overo.h                      |    1 +
 include/configs/omap4_common.h                     |    1 +
 include/configs/omap5_evm.h                        |    1 +
 include/configs/tam3517-common.h                   |    1 +
 include/configs/tricorder.h                        |    1 +
 include/spl.h                                      |   69 ++++++++++++++++++++
 spl/Makefile                                       |    1 +
 27 files changed, 137 insertions(+), 56 deletions(-)
 create mode 100644 common/spl/Makefile
 rename {arch/arm/cpu/armv7/omap-common => common/spl}/spl.c (99%)
 rename {arch/arm/cpu/armv7/omap-common => common/spl}/spl_ymodem.c (97%)
 rename {arch/arm/cpu/armv7/omap-common => drivers/mmc}/spl_mmc.c (99%)
 create mode 100644 include/spl.h

diff --git a/README b/README
index f1a12a5..ddbeb1b 100644
--- a/README
+++ b/README
@@ -2564,6 +2564,11 @@ FIT uImage format:
 		CONFIG_SYS_SPL_MALLOC_SIZE
 		The size of the malloc pool used in SPL.
 
+		CONFIG_SPL_FRAMEWORK
+		Enable the SPL framework under common/.  This framework
+		supports MMC, NAND and YMODEM loading of U-Boot and NAND
+		NAND loading of the Linux Kernel.
+
 		CONFIG_SPL_DISPLAY_PRINT
 		For ARM, enable an optional function to print more information
 		about the running system.
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index fadc6e7..d759a98 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -17,6 +17,7 @@
  */
 
 #include <common.h>
+#include <spl.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/omap.h>
@@ -25,7 +26,6 @@
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/common_def.h>
 #include <asm/io.h>
-#include <asm/spl.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 2a6625f..837e22e 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -46,16 +46,9 @@ SOBJS	+= lowlevel_init.o
 endif
 
 ifdef CONFIG_SPL_BUILD
-COBJS	+= spl.o
 ifdef CONFIG_SPL_NAND_SUPPORT
 COBJS	+= spl_nand.o
 endif
-ifdef CONFIG_SPL_MMC_SUPPORT
-COBJS	+= spl_mmc.o
-endif
-ifdef CONFIG_SPL_YMODEM_SUPPORT
-COBJS	+= spl_ymodem.o
-endif
 endif
 
 ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index ed398fd..0f19141 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -17,7 +17,7 @@
  */
 
 #include <common.h>
-#include <asm/spl.h>
+#include <spl.h>
 #include <asm/omap_common.h>
 #include <asm/arch/omap.h>
 #include <asm/arch/mmc_host_def.h>
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index d5fde38..ad8b5ac 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -28,10 +28,10 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <spl.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/sizes.h>
 #include <asm/emif.h>
-#include <asm/spl.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
index 1e6b5f0..9e9206c 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ b/arch/arm/cpu/armv7/omap-common/spl_nand.c
@@ -21,7 +21,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/spl.h>
+#include <spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
 #include <asm/io.h>
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 52196c8..42e2fd9 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -33,13 +33,13 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <spl.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mem.h>
 #include <asm/cache.h>
 #include <asm/armv7.h>
 #include <asm/arch/gpio.h>
-#include <asm/spl.h>
 #include <asm/omap_common.h>
 #include <asm/arch/mmc_host_def.h>
 #include <i2c.h>
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index 47ca1b6..ad61990 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -26,44 +26,4 @@
 /* Platform-specific defines */
 #include <asm/arch/spl.h>
 
-/* Boot type */
-#define MMCSD_MODE_UNDEFINED	0
-#define MMCSD_MODE_RAW		1
-#define MMCSD_MODE_FAT		2
-
-struct spl_image_info {
-	const char *name;
-	u8 os;
-	u32 load_addr;
-	u32 entry_point;
-	u32 size;
-};
-
-extern struct spl_image_info spl_image;
-extern u32 *boot_params_ptr;
-
-/* SPL common functions */
-void preloader_console_init(void);
-u32 spl_boot_device(void);
-u32 spl_boot_mode(void);
-void spl_parse_image_header(const struct image_header *header);
-void spl_board_prepare_for_linux(void);
-int spl_start_uboot(void);
-void spl_display_print(void);
-
-/* NAND SPL functions */
-void spl_nand_load_image(void);
-
-/* MMC SPL functions */
-void spl_mmc_load_image(void);
-
-/* YMODEM SPL functions */
-void spl_ymodem_load_image(void);
-
-/* SPI SPL functions */
-void spi_boot(void);
-
-#ifdef CONFIG_SPL_BOARD_INIT
-void spl_board_init(void);
-#endif
 #endif
diff --git a/common/spl/Makefile b/common/spl/Makefile
new file mode 100644
index 0000000..b61b438
--- /dev/null
+++ b/common/spl/Makefile
@@ -0,0 +1,37 @@
+#
+# (C) Copyright 2012
+# Texas Instruments Incorporated - http://www.ti.com/
+# Aneesh V <aneesh@ti.com>
+#
+# This file is released under the terms of GPL v2 and any later version.
+# See the file COPYING in the root directory of the source tree for details.
+#
+# Based on common/Makefile.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)libspl.o
+
+ifdef CONFIG_SPL_BUILD
+COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
+COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
+endif
+
+COBJS	:= $(sort $(COBJS-y))
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/common/spl/spl.c
similarity index 99%
rename from arch/arm/cpu/armv7/omap-common/spl.c
rename to common/spl/spl.c
index dc26750..3a2740a 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/common/spl/spl.c
@@ -23,7 +23,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/spl.h>
+#include <spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
 #include <nand.h>
diff --git a/arch/arm/cpu/armv7/omap-common/spl_ymodem.c b/common/spl/spl_ymodem.c
similarity index 97%
rename from arch/arm/cpu/armv7/omap-common/spl_ymodem.c
rename to common/spl/spl_ymodem.c
index 65565e3..40e5035 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_ymodem.c
+++ b/common/spl/spl_ymodem.c
@@ -26,11 +26,10 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/spl.h>
+#include <spl.h>
 #include <xyzModem.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
-#include <asm/arch/sys_proto.h>
 
 #define BUF_SIZE 1024
 
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index c567737..9abaf1a 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -25,6 +25,11 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libmmc.o
 
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_FRAMEWORK
+COBJS-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
+endif
+endif
 COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
 COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
 COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
diff --git a/arch/arm/cpu/armv7/omap-common/spl_mmc.c b/drivers/mmc/spl_mmc.c
similarity index 99%
rename from arch/arm/cpu/armv7/omap-common/spl_mmc.c
rename to drivers/mmc/spl_mmc.c
index 5c65ba5..7ae7c37 100644
--- a/arch/arm/cpu/armv7/omap-common/spl_mmc.c
+++ b/drivers/mmc/spl_mmc.c
@@ -23,7 +23,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/spl.h>
+#include <spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
 #include <asm/arch/sys_proto.h>
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index d0fbc88..cda2c4f 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -126,6 +126,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x402F0400
 #define CONFIG_SPL_MAX_SIZE		(46 * 1024)
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index b312028..9f4c386 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -322,6 +322,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index ab2ddc0..8f2ac89 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -321,6 +321,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 037a5bb..47187cf 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -305,6 +305,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index d9cfc10..4f29da6 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -309,6 +309,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_SOFTECC
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 657780e..1b4e2ee 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -398,6 +398,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 20192a9..22f30f4 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -280,6 +280,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index d29b326..8e63802 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -300,6 +300,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x40200800
 #define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index 685fde9..1384522 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -246,6 +246,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40304350
 #define CONFIG_SPL_MAX_SIZE		(38 * 1024)
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index ef4034c..65a34fa 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -243,6 +243,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40300350
 #define CONFIG_SPL_MAX_SIZE		0x19000	/* 100K */
 #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index e194b46..bb2cb7c 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -241,6 +241,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_CONSOLE
 #define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 56336ae..0679f18 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -275,6 +275,7 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SPL_BOARD_INIT
diff --git a/include/spl.h b/include/spl.h
new file mode 100644
index 0000000..af9ef71
--- /dev/null
+++ b/include/spl.h
@@ -0,0 +1,69 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_SPL_H_
+#define	_SPL_H_
+
+/* Platform-specific defines */
+#include <asm/spl.h>
+
+/* Boot type */
+#define MMCSD_MODE_UNDEFINED	0
+#define MMCSD_MODE_RAW		1
+#define MMCSD_MODE_FAT		2
+
+struct spl_image_info {
+	const char *name;
+	u8 os;
+	u32 load_addr;
+	u32 entry_point;
+	u32 size;
+};
+
+extern struct spl_image_info spl_image;
+extern u32 *boot_params_ptr;
+
+/* SPL common functions */
+void preloader_console_init(void);
+u32 spl_boot_device(void);
+u32 spl_boot_mode(void);
+void spl_parse_image_header(const struct image_header *header);
+void spl_board_prepare_for_linux(void);
+int spl_start_uboot(void);
+void spl_display_print(void);
+
+/* NAND SPL functions */
+void spl_nand_load_image(void);
+
+/* MMC SPL functions */
+void spl_mmc_load_image(void);
+
+/* YMODEM SPL functions */
+void spl_ymodem_load_image(void);
+
+/* SPI SPL functions */
+void spi_boot(void);
+
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void);
+#endif
+#endif
diff --git a/spl/Makefile b/spl/Makefile
index ea7d475..f96c08e 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -42,6 +42,7 @@ endif
 LIBS-y += board/$(BOARDDIR)/lib$(BOARD).o
 LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o
 
+LIBS-$(CONFIG_SPL_FRAMEWORK) += common/spl/libspl.o
 LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/libcommon.o
 LIBS-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/libdisk.o
 LIBS-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/libi2c.o
-- 
1.7.9.5

[U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

[Tom Rini]

- Convert the non-relocation part of board_init_f to spl_board_init,
  turn on CONFIG_SPL_BOARD_INIT in the configs.
- Remove duplicated code.
- Add spl_boot_device() that returns the statically chosen boot device.

Signed-off-by: Tom Rini <trini@ti.com>
---
Changes in v2:
- Add CONFIG_SYS_SPL_MALLOC_START / SIZE defines from Christian Riesch
- Add arch/arm/cpu/arm926ejs/davinci/config.mk to build u-boot.ais

 arch/arm/cpu/arm926ejs/davinci/config.mk |   16 +++++++++++
 arch/arm/cpu/arm926ejs/davinci/spl.c     |   45 +++++++-----------------------
 arch/arm/include/asm/arch-davinci/spl.h  |   28 +++++++++++++++++++
 include/configs/cam_enc_4xx.h            |    2 ++
 include/configs/da850evm.h               |    5 ++++
 include/configs/hawkboard.h              |    2 ++
 6 files changed, 63 insertions(+), 35 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/davinci/config.mk
 create mode 100644 arch/arm/include/asm/arch-davinci/spl.h

diff --git a/arch/arm/cpu/arm926ejs/davinci/config.mk b/arch/arm/cpu/arm926ejs/davinci/config.mk
new file mode 100644
index 0000000..42e55cc
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/config.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2012, Texas Instruments, Incorporated - http://www.ti.com/
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+ifndef CONFIG_SPL_BUILD
+ALL-y	+= $(obj)u-boot.ais
+endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c
index 74632e5..1848055 100644
--- a/arch/arm/cpu/arm926ejs/davinci/spl.c
+++ b/arch/arm/cpu/arm926ejs/davinci/spl.c
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <spl.h>
 #include <asm/u-boot.h>
 #include <asm/utils.h>
 #include <nand.h>
@@ -29,14 +30,7 @@
 #include <malloc.h>
 #include <spi_flash.h>
 
-#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
-
-DECLARE_GLOBAL_DATA_PTR;
-/* Define global data structure pointer to it*/
-static gd_t gdata __attribute__ ((section(".data")));
-static bd_t bdata __attribute__ ((section(".data")));
-
-#else
+#ifndef CONFIG_SPL_LIBCOMMON_SUPPORT
 
 void puts(const char *str)
 {
@@ -54,14 +48,7 @@ void putc(char c)
 
 #endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */
 
-inline void hang(void)
-{
-	puts("### ERROR ### Please RESET the board ###\n");
-	for (;;)
-		;
-}
-
-void board_init_f(ulong dummy)
+void spl_board_init(void)
 {
 #ifdef CONFIG_SOC_DM365
 	dm36x_lowlevel_init(0);
@@ -69,28 +56,16 @@ void board_init_f(ulong dummy)
 #ifdef CONFIG_SOC_DA8XX
 	arch_cpu_init();
 #endif
-	relocate_code(CONFIG_SPL_STACK, NULL, CONFIG_SPL_TEXT_BASE);
 }
 
-void board_init_r(gd_t *id, ulong dummy)
+u32 spl_boot_device(void)
 {
 #ifdef CONFIG_SPL_NAND_LOAD
-	nand_init();
-	puts("Nand boot...\n");
-	nand_boot();
-#endif
-#ifdef CONFIG_SPL_SPI_LOAD
-	mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_MALLOC_LEN,
-			CONFIG_SYS_MALLOC_LEN);
-
-	gd = &gdata;
-	gd->bd = &bdata;
-	gd->flags |= GD_FLG_RELOC;
-	gd->baudrate = CONFIG_BAUDRATE;
-	serial_init();          /* serial communications setup */
-	gd->have_console = 1;
-
-	puts("SPI boot...\n");
-	spi_boot();
+	return BOOT_DEVICE_NAND;
+#elif defined(CONFIG_SPL_SPI_LOAD)
+	return BOOT_DEVICE_SPI;
+#else
+	puts("Unknown boot device\n");
+	hang();
 #endif
 }
diff --git a/arch/arm/include/asm/arch-davinci/spl.h b/arch/arm/include/asm/arch-davinci/spl.h
new file mode 100644
index 0000000..f9c5131
--- /dev/null
+++ b/arch/arm/include/asm/arch-davinci/spl.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_SPL_H_
+
+#define BOOT_DEVICE_NAND	1
+#define BOOT_DEVICE_SPI		2
+#endif
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index 771ac9c..fe28278 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -217,6 +217,8 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_SIMPLE
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index e6adb1f..290ded1 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -313,6 +313,11 @@
 
 /* defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SYS_TEXT_BASE - \
+						CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index c6e9ce5..838e572 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -59,6 +59,8 @@
 
 /* Spl */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_LOAD
-- 
1.7.9.5

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Tom Rini]

Add a board-specific README that documents how to write u-boot.ais to
the SPI found on this board.

Changes-series: 2
- Add

Signed-off-by: Tom Rini <trini@ti.com>
---

 board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm

diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
new file mode 100644
index 0000000..382b718
--- /dev/null
+++ b/board/davinci/da8xxevm/README.da850_am18xxevm
@@ -0,0 +1,53 @@
+Summary
+=======
+The README is for the boot procedure used for the LogicPD AM1808 EVM.
+
+The board is booted in three stages. The initial bootloader which executes
+upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
+RBL initialises the memory and the SPI controller and reads the AIS image
+starting at block 0.  This image can contain both the SPL and U-Boot
+binaries.
+
+AIS is an image format defined by TI for the images that are to be
+loaded to memory by the RBL. The image is divided into a series of
+sections and the image's entry point is specified. Each section comes
+with meta data like the target address the section is to be copied to
+and the size of the section, which is used by the RBL to load the
+image. At the end of the image the RBL jumps to the image entry
+point.
+
+The secondary stage bootloader(spl) which is loaded by the RBL then loads
+the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
+entry point.
+
+
+Compilation
+===========
+To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
+the u-boot.ais file that needs to be written to SPI flash.
+
+
+Flashing the images to Nand
+===========================
+The AIS image can be written to SPI flash using the following commands.
+Assuming that the network is configured and enabled and the u-boot.ais file
+is tftp'able.
+
+U-Boot > sf probe 0
+U-Boot > sf erase 0 +320000
+U-Boot > tftp u-boot.ais
+U-Boot > sf write c0700000 0 $filesize
+
+
+Recovery
+========
+
+In the case of a "bricked" board, you need to use the TI tools found
+here[1] to write a UBL file and u-boot.bin.  Once the system is running
+again from these tools a good u-boot.ais may be re-written to SPI flash.
+
+
+Links
+=====
+[1]
+ http://processors.wiki.ti.com/index.php/Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L137
-- 
1.7.9.5

[U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c

[Tom Rini]

Takes the load function from arch/arm/lib/spl_nand.c instead.  This will
allow for easier integration of SPL-boots-Linux code on other arches.
Kill off CONFIG_SPL_NAND_LOAD as a separate option.

Signed-off-by: Tom Rini <trini@ti.com>
---

 arch/arm/cpu/arm926ejs/davinci/spl.c      |    2 +-
 arch/arm/cpu/armv7/omap-common/Makefile   |    6 --
 arch/arm/cpu/armv7/omap-common/spl_nand.c |  102 -----------------------------
 doc/README.SPL                            |    1 -
 drivers/mtd/nand/Makefile                 |    7 +-
 drivers/mtd/nand/nand_spl_load.c          |   89 ++++++++++++++++++-------
 include/configs/cam_enc_4xx.h             |    1 -
 include/configs/hawkboard.h               |    1 -
 8 files changed, 67 insertions(+), 142 deletions(-)
 delete mode 100644 arch/arm/cpu/armv7/omap-common/spl_nand.c

diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c
index 1848055..721ae4d 100644
--- a/arch/arm/cpu/arm926ejs/davinci/spl.c
+++ b/arch/arm/cpu/arm926ejs/davinci/spl.c
@@ -60,7 +60,7 @@ void spl_board_init(void)
 
 u32 spl_boot_device(void)
 {
-#ifdef CONFIG_SPL_NAND_LOAD
+#ifdef CONFIG_SPL_NAND_SIMPLE
 	return BOOT_DEVICE_NAND;
 #elif defined(CONFIG_SPL_SPI_LOAD)
 	return BOOT_DEVICE_SPI;
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 837e22e..0e0b641 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -45,12 +45,6 @@ COBJS	+= boot-common.o
 SOBJS	+= lowlevel_init.o
 endif
 
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_NAND_SUPPORT
-COBJS	+= spl_nand.o
-endif
-endif
-
 ifndef CONFIG_SPL_BUILD
 ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
 COBJS	+= mem-common.o
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
deleted file mode 100644
index 9e9206c..0000000
--- a/arch/arm/cpu/armv7/omap-common/spl_nand.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2011
- * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <spl.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <version.h>
-
-void spl_nand_load_image(void)
-{
-	struct image_header *header;
-	int *src __attribute__((unused));
-	int *dst __attribute__((unused));
-
-	debug("spl: nand - using hw ecc\n");
-	nand_init();
-
-	/*use CONFIG_SYS_TEXT_BASE as temporary storage area */
-	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
-#ifdef CONFIG_SPL_OS_BOOT
-	if (!spl_start_uboot()) {
-		/*
-		 * load parameter image
-		 * load to temp position since nand_spl_load_image reads
-		 * a whole block which is typically larger than
-		 * CONFIG_CMD_SPL_WRITE_SIZE therefore may overwrite
-		 * following sections like BSS
-		 */
-		nand_spl_load_image(CONFIG_CMD_SPL_NAND_OFS,
-			CONFIG_CMD_SPL_WRITE_SIZE,
-			(void *)CONFIG_SYS_TEXT_BASE);
-		/* copy to destintion */
-		for (dst = (int *)CONFIG_SYS_SPL_ARGS_ADDR,
-				src = (int *)CONFIG_SYS_TEXT_BASE;
-				src < (int *)(CONFIG_SYS_TEXT_BASE +
-				CONFIG_CMD_SPL_WRITE_SIZE);
-				src++, dst++) {
-			writel(readl(src), dst);
-		}
-
-		/* load linux */
-		nand_spl_load_image(CONFIG_SYS_NAND_SPL_KERNEL_OFFS,
-			CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
-		spl_parse_image_header(header);
-		if (header->ih_os == IH_OS_LINUX) {
-			/* happy - was a linux */
-			nand_spl_load_image(CONFIG_SYS_NAND_SPL_KERNEL_OFFS,
-				spl_image.size, (void *)spl_image.load_addr);
-			nand_deselect();
-			return;
-		} else {
-			printf("The Expected Linux image was not"
-				"found. Please check your NAND"
-				"configuration.\n");
-			printf("Trying to start u-boot now...\n");
-		}
-	}
-#endif
-#ifdef CONFIG_NAND_ENV_DST
-	nand_spl_load_image(CONFIG_ENV_OFFSET,
-		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
-	spl_parse_image_header(header);
-	nand_spl_load_image(CONFIG_ENV_OFFSET, spl_image.size,
-		(void *)spl_image.load_addr);
-#ifdef CONFIG_ENV_OFFSET_REDUND
-	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND,
-		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
-	spl_parse_image_header(header);
-	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, spl_image.size,
-		(void *)spl_image.load_addr);
-#endif
-#endif
-	/* Load u-boot */
-	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
-		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
-	spl_parse_image_header(header);
-	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
-		spl_image.size, (void *)spl_image.load_addr);
-	nand_deselect();
-}
diff --git a/doc/README.SPL b/doc/README.SPL
index e4a5ac3..3faf91c 100644
--- a/doc/README.SPL
+++ b/doc/README.SPL
@@ -64,7 +64,6 @@ CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o)
 CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o)
 CONFIG_SPL_DMA_SUPPORT (drivers/dma/libdma.o)
 CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o)
-CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/nand_spl_load.o)
 CONFIG_SPL_SPI_LOAD (drivers/mtd/spi/spi_spl_load.o)
 
 
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 29dc20e..5475c8c 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -27,12 +27,7 @@ LIB	:= $(obj)libnand.o
 
 ifdef CONFIG_CMD_NAND
 ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_NAND_SIMPLE
-COBJS-y += nand_spl_simple.o
-endif
-ifdef CONFIG_SPL_NAND_LOAD
-COBJS-y	+= nand_spl_load.o
-endif
+COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o nand_spl_load.o
 else
 COBJS-y += nand.o
 COBJS-y += nand_bbt.o
diff --git a/drivers/mtd/nand/nand_spl_load.c b/drivers/mtd/nand/nand_spl_load.c
index 215459a..c1c45b6 100644
--- a/drivers/mtd/nand/nand_spl_load.c
+++ b/drivers/mtd/nand/nand_spl_load.c
@@ -20,36 +20,77 @@
 
 #include <common.h>
 #include <nand.h>
+#include <spl.h>
+#include <asm/io.h>
 
-/*
- * The main entry for NAND booting. It's necessary that SDRAM is already
- * configured and available since this code loads the main U-Boot image
- * from NAND into SDRAM and starts it from there.
- */
-void nand_boot(void)
+void spl_nand_load_image(void)
 {
-	__attribute__((noreturn)) void (*uboot)(void);
+	struct image_header *header;
+	int *src __attribute__((unused));
+	int *dst __attribute__((unused));
 
-	/*
-	 * Load U-Boot image from NAND into RAM
-	 */
-	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
-			CONFIG_SYS_NAND_U_BOOT_SIZE,
-			(void *)CONFIG_SYS_NAND_U_BOOT_DST);
+	nand_init();
 
-#ifdef CONFIG_NAND_ENV_DST
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			(void *)CONFIG_NAND_ENV_DST);
+	/* use CONFIG_SYS_TEXT_BASE as temporary storage area */
+	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+#ifdef CONFIG_SPL_OS_BOOT
+	if (!spl_start_uboot()) {
+		/*
+		 * load parameter image
+		 * load to temp position since nand_spl_load_image reads
+		 * a whole block which is typically larger than
+		 * CONFIG_CMD_SPL_WRITE_SIZE therefore may overwrite
+		 * following sections like BSS
+		 */
+		nand_spl_load_image(CONFIG_CMD_SPL_NAND_OFS,
+			CONFIG_CMD_SPL_WRITE_SIZE,
+			(void *)CONFIG_SYS_TEXT_BASE);
+		/* copy to destintion */
+		for (dst = (int *)CONFIG_SYS_SPL_ARGS_ADDR,
+				src = (int *)CONFIG_SYS_TEXT_BASE;
+				src < (int *)(CONFIG_SYS_TEXT_BASE +
+				CONFIG_CMD_SPL_WRITE_SIZE);
+				src++, dst++) {
+			writel(readl(src), dst);
+		}
 
+		/* load linux */
+		nand_spl_load_image(CONFIG_SYS_NAND_SPL_KERNEL_OFFS,
+			CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+		spl_parse_image_header(header);
+		if (header->ih_os == IH_OS_LINUX) {
+			/* happy - was a linux */
+			nand_spl_load_image(CONFIG_SYS_NAND_SPL_KERNEL_OFFS,
+				spl_image.size, (void *)spl_image.load_addr);
+			nand_deselect();
+			return;
+		} else {
+			puts("The Expected Linux image was not "
+				"found. Please check your NAND "
+				"configuration.\n");
+			puts("Trying to start u-boot now...\n");
+		}
+	}
+#endif
+#ifdef CONFIG_NAND_ENV_DST
+	nand_spl_load_image(CONFIG_ENV_OFFSET,
+		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+	spl_parse_image_header(header);
+	nand_spl_load_image(CONFIG_ENV_OFFSET, spl_image.size,
+		(void *)spl_image.load_addr);
 #ifdef CONFIG_ENV_OFFSET_REDUND
-	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
-			(void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
+	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND,
+		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+	spl_parse_image_header(header);
+	nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, spl_image.size,
+		(void *)spl_image.load_addr);
 #endif
 #endif
-
-	/*
-	 * Jump to U-Boot image
-	 */
-	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
-	(*uboot)();
+	/* Load u-boot */
+	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+		CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+	spl_parse_image_header(header);
+	nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+		spl_image.size, (void *)spl_image.load_addr);
+	nand_deselect();
 }
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
index fe28278..34aac8c 100644
--- a/include/configs/cam_enc_4xx.h
+++ b/include/configs/cam_enc_4xx.h
@@ -222,7 +222,6 @@
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_NAND_LOAD
 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_POST_MEM_SUPPORT
diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h
index 838e572..5f2aa62 100644
--- a/include/configs/hawkboard.h
+++ b/include/configs/hawkboard.h
@@ -63,7 +63,6 @@
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_NAND_LOAD
 #define CONFIG_SPL_LIBGENERIC_SUPPORT	/* for udelay and __div64_32 for NAND */
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LDSCRIPT		"board/$(BOARDDIR)/u-boot-spl-hawk.lds"
-- 
1.7.9.5

[U-Boot] [PATCH v2 18/18] SPL: Enhance spi_spl_load to match the other load functions

[Tom Rini]

Signed-off-by: Tom Rini <trini@ti.com>
---

 common/spl/spl.c               |    4 ++--
 drivers/mtd/spi/spi_spl_load.c |   23 ++++++++++++-----------
 include/spl.h                  |    2 +-
 3 files changed, 15 insertions(+), 14 deletions(-)

diff --git a/common/spl/spl.c b/common/spl/spl.c
index 3a2740a..7d15460 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -177,8 +177,8 @@ void board_init_r(gd_t *id, ulong dummy)
 #endif
 #ifdef CONFIG_SPL_SPI_SUPPORT
 	case BOOT_DEVICE_SPI:
-		spi_boot();
-	break;
+		spl_spi_load_image();
+		break;
 #endif
 	default:
 		puts("SPL: Un-supported Boot Device\n");
diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c
index 1aa30ac..d4f81f2 100644
--- a/drivers/mtd/spi/spi_spl_load.c
+++ b/drivers/mtd/spi/spi_spl_load.c
@@ -24,16 +24,17 @@
 
 #include <common.h>
 #include <spi_flash.h>
+#include <spl.h>
 
 /*
  * The main entry for SPI booting. It's necessary that SDRAM is already
  * configured and available since this code loads the main U-Boot image
  * from SPI into SDRAM and starts it from there.
  */
-void spi_boot(void)
+void spl_spi_load_image(void)
 {
 	struct spi_flash *flash;
-	void (*uboot)(void) __noreturn;
+	struct image_header *header;
 
 	/*
 	 * Load U-Boot image from SPI flash into RAM
@@ -42,17 +43,17 @@ void spi_boot(void)
 	flash = spi_flash_probe(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS,
 				CONFIG_SF_DEFAULT_SPEED, SPI_MODE_3);
 	if (!flash) {
-		puts("failed.\n");
+		puts("SPI probe failed.\n");
 		hang();
 	}
 
-	spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
-		       CONFIG_SYS_SPI_U_BOOT_SIZE,
-		       (void *) CONFIG_SYS_TEXT_BASE);
+	/* use CONFIG_SYS_TEXT_BASE as temporary storage area */
+	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
 
-	/*
-	 * Jump to U-Boot image
-	 */
-	uboot = (void *) CONFIG_SYS_TEXT_BASE;
-	(*uboot)();
+	/* Load u-boot, mkimage header is 64 bytes. */
+	spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40,
+			(void *) header);
+	spl_parse_image_header(header);
+	spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS,
+		       spl_image.size, (void *)spl_image.load_addr);
 }
diff --git a/include/spl.h b/include/spl.h
index af9ef71..c0cb62e 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -61,7 +61,7 @@ void spl_mmc_load_image(void);
 void spl_ymodem_load_image(void);
 
 /* SPI SPL functions */
-void spi_boot(void);
+void spl_spi_load_image(void);
 
 #ifdef CONFIG_SPL_BOARD_INIT
 void spl_board_init(void);
-- 
1.7.9.5

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Prabhakar Lad]

Hi Tom,

Thanks for the patch.

On Monday 20 August 2012 10:15 PM, Tom Rini wrote:
> Add a board-specific README that documents how to write u-boot.ais to
> the SPI found on this board.
> 
> Changes-series: 2
> - Add
> 
> Signed-off-by: Tom Rini <trini@ti.com>
> ---
> 
>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
> 
> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
> new file mode 100644
> index 0000000..382b718
> --- /dev/null
> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
> @@ -0,0 +1,53 @@
> +Summary
> +=======
> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
> +
> +The board is booted in three stages. The initial bootloader which executes
> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
> +RBL initialises the memory and the SPI controller and reads the AIS image
> +starting at block 0.  This image can contain both the SPL and U-Boot
> +binaries.
> +
> +AIS is an image format defined by TI for the images that are to be
> +loaded to memory by the RBL. The image is divided into a series of
> +sections and the image's entry point is specified. Each section comes
> +with meta data like the target address the section is to be copied to
> +and the size of the section, which is used by the RBL to load the
> +image. At the end of the image the RBL jumps to the image entry
> +point.
> +
> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
> +entry point.
> +
> +
> +Compilation
> +===========
> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
> +the u-boot.ais file that needs to be written to SPI flash.
> +
> +
> +Flashing the images to Nand
> +===========================
> +The AIS image can be written to SPI flash using the following commands.
> +Assuming that the network is configured and enabled and the u-boot.ais file
> +is tftp'able.
> +
> +U-Boot > sf probe 0
> +U-Boot > sf erase 0 +320000
> +U-Boot > tftp u-boot.ais
> +U-Boot > sf write c0700000 0 $filesize
> +
  Is this procedure to be done in Nand boot mode ?

Thx,
--Prabhakar

> +
> +Recovery
> +========
> +
> +In the case of a "bricked" board, you need to use the TI tools found
> +here[1] to write a UBL file and u-boot.bin.  Once the system is running
> +again from these tools a good u-boot.ais may be re-written to SPI flash.
> +
> +
> +Links
> +=====
> +[1]
> + http://processors.wiki.ti.com/index.php/Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L137
> 

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Tom Rini]

On 08/20/2012 10:09 PM, Prabhakar Lad wrote:
> Hi Tom,
> 
> Thanks for the patch.
> 
> On Monday 20 August 2012 10:15 PM, Tom Rini wrote:
>> Add a board-specific README that documents how to write u-boot.ais to
>> the SPI found on this board.
>>
>> Changes-series: 2
>> - Add
>>
>> Signed-off-by: Tom Rini <trini@ti.com>
>> ---
>>
>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
>>  1 file changed, 53 insertions(+)
>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
>>
>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
>> new file mode 100644
>> index 0000000..382b718
>> --- /dev/null
>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
>> @@ -0,0 +1,53 @@
>> +Summary
>> +=======
>> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
>> +
>> +The board is booted in three stages. The initial bootloader which executes
>> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
>> +RBL initialises the memory and the SPI controller and reads the AIS image
>> +starting at block 0.  This image can contain both the SPL and U-Boot
>> +binaries.
>> +
>> +AIS is an image format defined by TI for the images that are to be
>> +loaded to memory by the RBL. The image is divided into a series of
>> +sections and the image's entry point is specified. Each section comes
>> +with meta data like the target address the section is to be copied to
>> +and the size of the section, which is used by the RBL to load the
>> +image. At the end of the image the RBL jumps to the image entry
>> +point.
>> +
>> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
>> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
>> +entry point.
>> +
>> +
>> +Compilation
>> +===========
>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
>> +the u-boot.ais file that needs to be written to SPI flash.
>> +
>> +
>> +Flashing the images to Nand
>> +===========================
>> +The AIS image can be written to SPI flash using the following commands.
>> +Assuming that the network is configured and enabled and the u-boot.ais file
>> +is tftp'able.
>> +
>> +U-Boot > sf probe 0
>> +U-Boot > sf erase 0 +320000
>> +U-Boot > tftp u-boot.ais
>> +U-Boot > sf write c0700000 0 $filesize
>> +
>   Is this procedure to be done in Nand boot mode ?

This board, as far as I know (which isn't much) doesn't use NAND, just
SPI.  The USE_NAND section of da850evm.h doesn't seem reachable today at
least.

-- 
Tom

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Prabhakar Lad]

On Tuesday 21 August 2012 09:04 PM, Tom Rini wrote:
> On 08/20/2012 10:09 PM, Prabhakar Lad wrote:
>> Hi Tom,
>>
>> Thanks for the patch.
>>
>> On Monday 20 August 2012 10:15 PM, Tom Rini wrote:
>>> Add a board-specific README that documents how to write u-boot.ais to
>>> the SPI found on this board.
>>>
>>> Changes-series: 2
>>> - Add
>>>
>>> Signed-off-by: Tom Rini <trini@ti.com>
>>> ---
>>>
>>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
>>>  1 file changed, 53 insertions(+)
>>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
>>>
>>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
>>> new file mode 100644
>>> index 0000000..382b718
>>> --- /dev/null
>>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
>>> @@ -0,0 +1,53 @@
>>> +Summary
>>> +=======
>>> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
>>> +
>>> +The board is booted in three stages. The initial bootloader which executes
>>> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
>>> +RBL initialises the memory and the SPI controller and reads the AIS image
>>> +starting at block 0.  This image can contain both the SPL and U-Boot
>>> +binaries.
>>> +
>>> +AIS is an image format defined by TI for the images that are to be
>>> +loaded to memory by the RBL. The image is divided into a series of
>>> +sections and the image's entry point is specified. Each section comes
>>> +with meta data like the target address the section is to be copied to
>>> +and the size of the section, which is used by the RBL to load the
>>> +image. At the end of the image the RBL jumps to the image entry
>>> +point.
>>> +
>>> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
>>> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
>>> +entry point.
>>> +
>>> +
>>> +Compilation
>>> +===========
>>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
>>> +the u-boot.ais file that needs to be written to SPI flash.
>>> +
>>> +
>>> +Flashing the images to Nand
>>> +===========================
>>> +The AIS image can be written to SPI flash using the following commands.
>>> +Assuming that the network is configured and enabled and the u-boot.ais file
>>> +is tftp'able.
>>> +
>>> +U-Boot > sf probe 0
>>> +U-Boot > sf erase 0 +320000
>>> +U-Boot > tftp u-boot.ais
>>> +U-Boot > sf write c0700000 0 $filesize
>>> +
>>   Is this procedure to be done in Nand boot mode ?
> 
> This board, as far as I know (which isn't much) doesn't use NAND, just
> SPI.  The USE_NAND section of da850evm.h doesn't seem reachable today at
> least.
> 
  But the title for above says 'Flashing the images to Nand' ? It should
be SPI.

Thx,
--Prabhakar

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Tom Rini]

On Tue, Aug 21, 2012 at 9:46 PM, Prabhakar Lad <prabhakar.lad@ti.com> wrote:
> On Tuesday 21 August 2012 09:04 PM, Tom Rini wrote:
>> On 08/20/2012 10:09 PM, Prabhakar Lad wrote:
>>> Hi Tom,
>>>
>>> Thanks for the patch.
>>>
>>> On Monday 20 August 2012 10:15 PM, Tom Rini wrote:
>>>> Add a board-specific README that documents how to write u-boot.ais to
>>>> the SPI found on this board.
>>>>
>>>> Changes-series: 2
>>>> - Add
>>>>
>>>> Signed-off-by: Tom Rini <trini@ti.com>
>>>> ---
>>>>
>>>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
>>>>  1 file changed, 53 insertions(+)
>>>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
>>>>
>>>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
>>>> new file mode 100644
>>>> index 0000000..382b718
>>>> --- /dev/null
>>>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
>>>> @@ -0,0 +1,53 @@
>>>> +Summary
>>>> +=======
>>>> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
>>>> +
>>>> +The board is booted in three stages. The initial bootloader which executes
>>>> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
>>>> +RBL initialises the memory and the SPI controller and reads the AIS image
>>>> +starting at block 0.  This image can contain both the SPL and U-Boot
>>>> +binaries.
>>>> +
>>>> +AIS is an image format defined by TI for the images that are to be
>>>> +loaded to memory by the RBL. The image is divided into a series of
>>>> +sections and the image's entry point is specified. Each section comes
>>>> +with meta data like the target address the section is to be copied to
>>>> +and the size of the section, which is used by the RBL to load the
>>>> +image. At the end of the image the RBL jumps to the image entry
>>>> +point.
>>>> +
>>>> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
>>>> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
>>>> +entry point.
>>>> +
>>>> +
>>>> +Compilation
>>>> +===========
>>>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
>>>> +the u-boot.ais file that needs to be written to SPI flash.
>>>> +
>>>> +
>>>> +Flashing the images to Nand
>>>> +===========================
>>>> +The AIS image can be written to SPI flash using the following commands.
>>>> +Assuming that the network is configured and enabled and the u-boot.ais file
>>>> +is tftp'able.
>>>> +
>>>> +U-Boot > sf probe 0
>>>> +U-Boot > sf erase 0 +320000
>>>> +U-Boot > tftp u-boot.ais
>>>> +U-Boot > sf write c0700000 0 $filesize
>>>> +
>>>   Is this procedure to be done in Nand boot mode ?
>>
>> This board, as far as I know (which isn't much) doesn't use NAND, just
>> SPI.  The USE_NAND section of da850evm.h doesn't seem reachable today at
>> least.
>>
>   But the title for above says 'Flashing the images to Nand' ? It should
> be SPI.

You are correct, thanks.

-- 
Tom

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Christian Riesch]

[cc'd Manjunath Hadli]

Hi Tom,

On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
> Add a board-specific README that documents how to write u-boot.ais to
> the SPI found on this board.
>
> Changes-series: 2
> - Add
>
> Signed-off-by: Tom Rini <trini@ti.com>
> ---
>
>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
>
> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
> new file mode 100644
> index 0000000..382b718
> --- /dev/null
> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
> @@ -0,0 +1,53 @@
> +Summary
> +=======
> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
> +
> +The board is booted in three stages. The initial bootloader which executes
> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
> +RBL initialises the memory and the SPI controller and reads the AIS image
> +starting at block 0.  This image can contain both the SPL and U-Boot
> +binaries.
> +
> +AIS is an image format defined by TI for the images that are to be
> +loaded to memory by the RBL. The image is divided into a series of
> +sections and the image's entry point is specified. Each section comes
> +with meta data like the target address the section is to be copied to
> +and the size of the section, which is used by the RBL to load the
> +image. At the end of the image the RBL jumps to the image entry
> +point.
> +
> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
> +entry point.
> +
> +
> +Compilation
> +===========
> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build

da850_am18xxevm is for the Spectrum Digital EVM for the AM1808. For
the Logic PD board you will need 'make da850evm'. See [1]

Regards, Christian


[1] http://lists.denx.de/pipermail/u-boot/2012-February/117082.html

> +the u-boot.ais file that needs to be written to SPI flash.
> +
> +
> +Flashing the images to Nand
> +===========================
> +The AIS image can be written to SPI flash using the following commands.
> +Assuming that the network is configured and enabled and the u-boot.ais file
> +is tftp'able.
> +
> +U-Boot > sf probe 0
> +U-Boot > sf erase 0 +320000
> +U-Boot > tftp u-boot.ais
> +U-Boot > sf write c0700000 0 $filesize
> +
> +
> +Recovery
> +========
> +
> +In the case of a "bricked" board, you need to use the TI tools found
> +here[1] to write a UBL file and u-boot.bin.  Once the system is running
> +again from these tools a good u-boot.ais may be re-written to SPI flash.
> +
> +
> +Links
> +=====
> +[1]
> + http://processors.wiki.ti.com/index.php/Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L137
> --
> 1.7.9.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Prabhakar Lad]

Hi,

On Wednesday 22 August 2012 01:43 PM, Christian Riesch wrote:
> [cc'd Manjunath Hadli]
> 
> Hi Tom,
> 
> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
>> Add a board-specific README that documents how to write u-boot.ais to
>> the SPI found on this board.
>>
>> Changes-series: 2
>> - Add
>>
>> Signed-off-by: Tom Rini <trini@ti.com>
>> ---
>>
>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
>>  1 file changed, 53 insertions(+)
>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
>>
>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
>> new file mode 100644
>> index 0000000..382b718
>> --- /dev/null
>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
>> @@ -0,0 +1,53 @@
>> +Summary
>> +=======
>> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
>> +
>> +The board is booted in three stages. The initial bootloader which executes
>> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
>> +RBL initialises the memory and the SPI controller and reads the AIS image
>> +starting at block 0.  This image can contain both the SPL and U-Boot
>> +binaries.
>> +
>> +AIS is an image format defined by TI for the images that are to be
>> +loaded to memory by the RBL. The image is divided into a series of
>> +sections and the image's entry point is specified. Each section comes
>> +with meta data like the target address the section is to be copied to
>> +and the size of the section, which is used by the RBL to load the
>> +image. At the end of the image the RBL jumps to the image entry
>> +point.
>> +
>> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
>> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
>> +entry point.
>> +
>> +
>> +Compilation
>> +===========
>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
> 
> da850_am18xxevm is for the Spectrum Digital EVM for the AM1808. For
> the Logic PD board you will need 'make da850evm'. See [1]
> 
  May be having a common README for am18x and omap-l138 would be good ?

Thx,
--Prabhakar

> Regards, Christian
> 
> 
> [1] http://lists.denx.de/pipermail/u-boot/2012-February/117082.html
> 
>> +the u-boot.ais file that needs to be written to SPI flash.
>> +
>> +
>> +Flashing the images to Nand
>> +===========================
>> +The AIS image can be written to SPI flash using the following commands.
>> +Assuming that the network is configured and enabled and the u-boot.ais file
>> +is tftp'able.
>> +
>> +U-Boot > sf probe 0
>> +U-Boot > sf erase 0 +320000
>> +U-Boot > tftp u-boot.ais
>> +U-Boot > sf write c0700000 0 $filesize
>> +
>> +
>> +Recovery
>> +========
>> +
>> +In the case of a "bricked" board, you need to use the TI tools found
>> +here[1] to write a UBL file and u-boot.bin.  Once the system is running
>> +again from these tools a good u-boot.ais may be re-written to SPI flash.
>> +
>> +
>> +Links
>> +=====
>> +[1]
>> + http://processors.wiki.ti.com/index.php/Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L137
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Christian Riesch]

Hi Prabhakar,

On Wed, Aug 22, 2012 at 11:07 AM, Prabhakar Lad <prabhakar.lad@ti.com> wrote:
> Hi,
>
> On Wednesday 22 August 2012 01:43 PM, Christian Riesch wrote:
>> [cc'd Manjunath Hadli]
>>
>> Hi Tom,
>>
>> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
>>> Add a board-specific README that documents how to write u-boot.ais to
>>> the SPI found on this board.
>>>
>>> Changes-series: 2
>>> - Add
>>>
>>> Signed-off-by: Tom Rini <trini@ti.com>
>>> ---
>>>
>>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
>>>  1 file changed, 53 insertions(+)
>>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
>>>
>>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
>>> new file mode 100644
>>> index 0000000..382b718
>>> --- /dev/null
>>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
>>> @@ -0,0 +1,53 @@
>>> +Summary
>>> +=======
>>> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
>>> +
>>> +The board is booted in three stages. The initial bootloader which executes
>>> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
>>> +RBL initialises the memory and the SPI controller and reads the AIS image
>>> +starting at block 0.  This image can contain both the SPL and U-Boot
>>> +binaries.
>>> +
>>> +AIS is an image format defined by TI for the images that are to be
>>> +loaded to memory by the RBL. The image is divided into a series of
>>> +sections and the image's entry point is specified. Each section comes
>>> +with meta data like the target address the section is to be copied to
>>> +and the size of the section, which is used by the RBL to load the
>>> +image. At the end of the image the RBL jumps to the image entry
>>> +point.
>>> +
>>> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
>>> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
>>> +entry point.
>>> +
>>> +
>>> +Compilation
>>> +===========
>>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
>>
>> da850_am18xxevm is for the Spectrum Digital EVM for the AM1808. For
>> the Logic PD board you will need 'make da850evm'. See [1]
>>
>   May be having a common README for am18x and omap-l138 would be good ?
>

This is a good idea.

But just to make it clear: Afaik the da850evm configuration works for
both the AM1808 and the OMAP-L138 board from LogicPD (at least I am
using it with the AM1808 experimenter's kit from LogicPD). The
da850_am18xxevm is for the Spectrum Digital board. At least this is
what I understood from the discussion with Manjunath Hadli in the in
the u-boot mailing list thread I cited earlier. I hope this is
correct, I haven't got other boards than the AM1808 board from LogicPD
to test.

Regards, Christian

[U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

[Christian Riesch]

Hi Tom,

On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
> - Convert the non-relocation part of board_init_f to spl_board_init,
>   turn on CONFIG_SPL_BOARD_INIT in the configs.
> - Remove duplicated code.
> - Add spl_boot_device() that returns the statically chosen boot device.

I tested the patchset on the LogicPD AM1808 experimenter's kit:

make da850evm
and flashing to SPI flash with
mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 -flash_noubl
u-boot.ais

The board boots up fine, but after pressing the reset button or
issuing the u-boot "reset" command, it is dead. Only power-cycling
helps. Before enabling the SPL framework in this patch reset works
fine. Any ideas?

Regards, Christian

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Prabhakar Lad]

Hi Christian,

On Wednesday 22 August 2012 02:47 PM, Christian Riesch wrote:
> Hi Prabhakar,
> 
> On Wed, Aug 22, 2012 at 11:07 AM, Prabhakar Lad <prabhakar.lad@ti.com> wrote:
>> Hi,
>>
>> On Wednesday 22 August 2012 01:43 PM, Christian Riesch wrote:
>>> [cc'd Manjunath Hadli]
>>>
>>> Hi Tom,
>>>
>>> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
>>>> Add a board-specific README that documents how to write u-boot.ais to
>>>> the SPI found on this board.
>>>>
>>>> Changes-series: 2
>>>> - Add
>>>>
>>>> Signed-off-by: Tom Rini <trini@ti.com>
>>>> ---
>>>>
>>>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
>>>>  1 file changed, 53 insertions(+)
>>>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
>>>>
>>>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
>>>> new file mode 100644
>>>> index 0000000..382b718
>>>> --- /dev/null
>>>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
>>>> @@ -0,0 +1,53 @@
>>>> +Summary
>>>> +=======
>>>> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
>>>> +
>>>> +The board is booted in three stages. The initial bootloader which executes
>>>> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
>>>> +RBL initialises the memory and the SPI controller and reads the AIS image
>>>> +starting at block 0.  This image can contain both the SPL and U-Boot
>>>> +binaries.
>>>> +
>>>> +AIS is an image format defined by TI for the images that are to be
>>>> +loaded to memory by the RBL. The image is divided into a series of
>>>> +sections and the image's entry point is specified. Each section comes
>>>> +with meta data like the target address the section is to be copied to
>>>> +and the size of the section, which is used by the RBL to load the
>>>> +image. At the end of the image the RBL jumps to the image entry
>>>> +point.
>>>> +
>>>> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
>>>> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
>>>> +entry point.
>>>> +
>>>> +
>>>> +Compilation
>>>> +===========
>>>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
>>>
>>> da850_am18xxevm is for the Spectrum Digital EVM for the AM1808. For
>>> the Logic PD board you will need 'make da850evm'. See [1]
>>>
>>   May be having a common README for am18x and omap-l138 would be good ?
>>
> 
> This is a good idea.
> 
> But just to make it clear: Afaik the da850evm configuration works for
> both the AM1808 and the OMAP-L138 board from LogicPD (at least I am
> using it with the AM1808 experimenter's kit from LogicPD). The
> da850_am18xxevm is for the Spectrum Digital board. At least this is
> what I understood from the discussion with Manjunath Hadli in the in
> the u-boot mailing list thread I cited earlier. I hope this is
> correct, I haven't got other boards than the AM1808 board from LogicPD
> to test.
> 
AFAIK the difference between AM1808 and OMAP-L138 is that,
1: The AM1808 has EEPROM and stores the MAC address in it where as
OMAP-L138 stores the MAC address in SPI flash.
2: The revision number differs for both.

Thx,
--Prabhakar

> Regards, Christian
> 

[U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

[Prabhakar Lad]

Hi Tom,

On Wednesday 22 August 2012 03:34 PM, Christian Riesch wrote:
> Hi Tom,
> 
> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
>> - Convert the non-relocation part of board_init_f to spl_board_init,
>>   turn on CONFIG_SPL_BOARD_INIT in the configs.
>> - Remove duplicated code.
>> - Add spl_boot_device() that returns the statically chosen boot device.
> 
> I tested the patchset on the LogicPD AM1808 experimenter's kit:
> 
> make da850evm
> and flashing to SPI flash with
> mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 -flash_noubl
> u-boot.ais
> 
I tried testing the same on omap-l138 (the entire patch set) for SPI
boot mode itsef, unfortunately the board doesn't even come up. Any Ideas ?

Thx,
--Prabhakar

> The board boots up fine, but after pressing the reset button or
> issuing the u-boot "reset" command, it is dead. Only power-cycling
> helps. Before enabling the SPL framework in this patch reset works
> fine. Any ideas?
> 
> Regards, Christian
> 

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Christian Riesch]

Hi Prabhakar,

On Wednesday, August 22, 2012, Prabhakar Lad wrote:

> Hi Christian,
>
> On Wednesday 22 August 2012 02:47 PM, Christian Riesch wrote:
> > Hi Prabhakar,
> >
> > On Wed, Aug 22, 2012 at 11:07 AM, Prabhakar Lad <prabhakar.lad@ti.com<javascript:;>>
> wrote:
> >> Hi,
> >>
> >> On Wednesday 22 August 2012 01:43 PM, Christian Riesch wrote:
> >>> [cc'd Manjunath Hadli]
> >>>
> >>> Hi Tom,
> >>>
> >>> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com <javascript:;>>
> wrote:
> >>>> Add a board-specific README that documents how to write u-boot.ais to
> >>>> the SPI found on this board.
> >>>>
> >>>> Changes-series: 2
> >>>> - Add
> >>>>
> >>>> Signed-off-by: Tom Rini <trini@ti.com <javascript:;>>
> >>>> ---
> >>>>
> >>>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53
> +++++++++++++++++++++++++
> >>>>  1 file changed, 53 insertions(+)
> >>>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
> >>>>
> >>>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm
> b/board/davinci/da8xxevm/README.da850_am18xxevm
> >>>> new file mode 100644
> >>>> index 0000000..382b718
> >>>> --- /dev/null
> >>>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
> >>>> @@ -0,0 +1,53 @@
> >>>> +Summary
> >>>> +=======
> >>>> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
> >>>> +
> >>>> +The board is booted in three stages. The initial bootloader which
> executes
> >>>> +upon reset is the Rom Boot Loader(RBL) which sits in the internal
> ROM. The
> >>>> +RBL initialises the memory and the SPI controller and reads the AIS
> image
> >>>> +starting at block 0.  This image can contain both the SPL and U-Boot
> >>>> +binaries.
> >>>> +
> >>>> +AIS is an image format defined by TI for the images that are to be
> >>>> +loaded to memory by the RBL. The image is divided into a series of
> >>>> +sections and the image's entry point is specified. Each section comes
> >>>> +with meta data like the target address the section is to be copied to
> >>>> +and the size of the section, which is used by the RBL to load the
> >>>> +image. At the end of the image the RBL jumps to the image entry
> >>>> +point.
> >>>> +
> >>>> +The secondary stage bootloader(spl) which is loaded by the RBL then
> loads
> >>>> +the u-boot from a predefined location in SPI to DDR and jumps to the
> u-boot
> >>>> +entry point.
> >>>> +
> >>>> +
> >>>> +Compilation
> >>>> +===========
> >>>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This
> will build
> >>>
> >>> da850_am18xxevm is for the Spectrum Digital EVM for the AM1808. For
> >>> the Logic PD board you will need 'make da850evm'. See [1]
> >>>
> >>   May be having a common README for am18x and omap-l138 would be good ?
> >>
> >
> > This is a good idea.
> >
> > But just to make it clear: Afaik the da850evm configuration works for
> > both the AM1808 and the OMAP-L138 board from LogicPD (at least I am
> > using it with the AM1808 experimenter's kit from LogicPD). The
> > da850_am18xxevm is for the Spectrum Digital board. At least this is
> > what I understood from the discussion with Manjunath Hadli in the in
> > the u-boot mailing list thread I cited earlier. I hope this is
> > correct, I haven't got other boards than the AM1808 board from LogicPD
> > to test.
> >
> AFAIK the difference between AM1808 and OMAP-L138 is that,
> 1: The AM1808 has EEPROM and stores the MAC address in it where as
> OMAP-L138 stores the MAC address in SPI flash.


Are you sure? I don't see that in datasheets/schematics.

Christian



> 2: The revision number differs for both.
>
> Thx,
> --Prabhakar
>
>



> > Regards, Christian
> >
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de <javascript:;>
> http://lists.denx.de/mailman/listinfo/u-boot
>

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Tom Rini]

On Wed, Aug 22, 2012 at 10:13:02AM +0200, Christian Riesch wrote:
> [cc'd Manjunath Hadli]
> 
> Hi Tom,
> 
> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
> > Add a board-specific README that documents how to write u-boot.ais to
> > the SPI found on this board.
> >
> > Changes-series: 2
> > - Add
> >
> > Signed-off-by: Tom Rini <trini@ti.com>
> > ---
> >
> >  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
> >  1 file changed, 53 insertions(+)
> >  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
> >
> > diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
> > new file mode 100644
> > index 0000000..382b718
> > --- /dev/null
> > +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
> > @@ -0,0 +1,53 @@
> > +Summary
> > +=======
> > +The README is for the boot procedure used for the LogicPD AM1808 EVM.
> > +
> > +The board is booted in three stages. The initial bootloader which executes
> > +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
> > +RBL initialises the memory and the SPI controller and reads the AIS image
> > +starting at block 0.  This image can contain both the SPL and U-Boot
> > +binaries.
> > +
> > +AIS is an image format defined by TI for the images that are to be
> > +loaded to memory by the RBL. The image is divided into a series of
> > +sections and the image's entry point is specified. Each section comes
> > +with meta data like the target address the section is to be copied to
> > +and the size of the section, which is used by the RBL to load the
> > +image. At the end of the image the RBL jumps to the image entry
> > +point.
> > +
> > +The secondary stage bootloader(spl) which is loaded by the RBL then loads
> > +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
> > +entry point.
> > +
> > +
> > +Compilation
> > +===========
> > +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
> 
> da850_am18xxevm is for the Spectrum Digital EVM for the AM1808. For
> the Logic PD board you will need 'make da850evm'. See [1]

This is funny since the Logic PD board is also called the "AM1808
Evaluation Module" rather than a "Davinci" EVM.  So the README needs a
little more work :)  I'll update and rename.

-- 
Tom

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Tom Rini]

On Wed, Aug 22, 2012 at 03:35:30PM +0530, Prabhakar Lad wrote:
> Hi Christian,
> 
> On Wednesday 22 August 2012 02:47 PM, Christian Riesch wrote:
> > Hi Prabhakar,
> > 
> > On Wed, Aug 22, 2012 at 11:07 AM, Prabhakar Lad <prabhakar.lad@ti.com> wrote:
> >> Hi,
> >>
> >> On Wednesday 22 August 2012 01:43 PM, Christian Riesch wrote:
> >>> [cc'd Manjunath Hadli]
> >>>
> >>> Hi Tom,
> >>>
> >>> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
> >>>> Add a board-specific README that documents how to write u-boot.ais to
> >>>> the SPI found on this board.
> >>>>
> >>>> Changes-series: 2
> >>>> - Add
> >>>>
> >>>> Signed-off-by: Tom Rini <trini@ti.com>
> >>>> ---
> >>>>
> >>>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53 +++++++++++++++++++++++++
> >>>>  1 file changed, 53 insertions(+)
> >>>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
> >>>>
> >>>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm b/board/davinci/da8xxevm/README.da850_am18xxevm
> >>>> new file mode 100644
> >>>> index 0000000..382b718
> >>>> --- /dev/null
> >>>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
> >>>> @@ -0,0 +1,53 @@
> >>>> +Summary
> >>>> +=======
> >>>> +The README is for the boot procedure used for the LogicPD AM1808 EVM.
> >>>> +
> >>>> +The board is booted in three stages. The initial bootloader which executes
> >>>> +upon reset is the Rom Boot Loader(RBL) which sits in the internal ROM. The
> >>>> +RBL initialises the memory and the SPI controller and reads the AIS image
> >>>> +starting at block 0.  This image can contain both the SPL and U-Boot
> >>>> +binaries.
> >>>> +
> >>>> +AIS is an image format defined by TI for the images that are to be
> >>>> +loaded to memory by the RBL. The image is divided into a series of
> >>>> +sections and the image's entry point is specified. Each section comes
> >>>> +with meta data like the target address the section is to be copied to
> >>>> +and the size of the section, which is used by the RBL to load the
> >>>> +image. At the end of the image the RBL jumps to the image entry
> >>>> +point.
> >>>> +
> >>>> +The secondary stage bootloader(spl) which is loaded by the RBL then loads
> >>>> +the u-boot from a predefined location in SPI to DDR and jumps to the u-boot
> >>>> +entry point.
> >>>> +
> >>>> +
> >>>> +Compilation
> >>>> +===========
> >>>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.  This will build
> >>>
> >>> da850_am18xxevm is for the Spectrum Digital EVM for the AM1808. For
> >>> the Logic PD board you will need 'make da850evm'. See [1]
> >>>
> >>   May be having a common README for am18x and omap-l138 would be good ?
> >>
> > 
> > This is a good idea.
> > 
> > But just to make it clear: Afaik the da850evm configuration works for
> > both the AM1808 and the OMAP-L138 board from LogicPD (at least I am
> > using it with the AM1808 experimenter's kit from LogicPD). The
> > da850_am18xxevm is for the Spectrum Digital board. At least this is
> > what I understood from the discussion with Manjunath Hadli in the in
> > the u-boot mailing list thread I cited earlier. I hope this is
> > correct, I haven't got other boards than the AM1808 board from LogicPD
> > to test.
> > 
> AFAIK the difference between AM1808 and OMAP-L138 is that,
> 1: The AM1808 has EEPROM and stores the MAC address in it where as
> OMAP-L138 stores the MAC address in SPI flash.

I don't think this is right.  I believe on the Logic PD board it's
stored in SPI (I know mine isn't stored in EEPROM).  I think the answer
is that the OMAP-L138 has DSP and the AM part does not.  This would mean
that Logic PD gets the most re-use out of the base-board possible :)

-- 
Tom

[U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

[Tom Rini]

On Wed, Aug 22, 2012 at 12:04:27PM +0200, Christian Riesch wrote:
> Hi Tom,
> 
> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
> > - Convert the non-relocation part of board_init_f to spl_board_init,
> >   turn on CONFIG_SPL_BOARD_INIT in the configs.
> > - Remove duplicated code.
> > - Add spl_boot_device() that returns the statically chosen boot device.
> 
> I tested the patchset on the LogicPD AM1808 experimenter's kit:
> 
> make da850evm
> and flashing to SPI flash with
> mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 -flash_noubl
> u-boot.ais

Confirmed, and I'll update the README to say that is how you can write
the u-boot.ais in recovery mode.

> The board boots up fine, but after pressing the reset button or
> issuing the u-boot "reset" command, it is dead. Only power-cycling
> helps. Before enabling the SPL framework in this patch reset works
> fine. Any ideas?

OK, I don't like the SPL malloc fix from before and I think it just
masked, partially, a real problem.  The SPI code did not change in the
framework.  And the very basic framework does not require malloc.  I'm
going to poke around and see what I can see, but more eyes would be
welcome.

-- 
Tom

[U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

[Tom Rini]

On Wed, Aug 22, 2012 at 10:46:19AM -0700, Tom Rini wrote:
> On Wed, Aug 22, 2012 at 12:04:27PM +0200, Christian Riesch wrote:
> > Hi Tom,
> > 
> > On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
> > > - Convert the non-relocation part of board_init_f to spl_board_init,
> > >   turn on CONFIG_SPL_BOARD_INIT in the configs.
> > > - Remove duplicated code.
> > > - Add spl_boot_device() that returns the statically chosen boot device.
> > 
> > I tested the patchset on the LogicPD AM1808 experimenter's kit:
> > 
> > make da850evm
> > and flashing to SPI flash with
> > mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 -flash_noubl
> > u-boot.ais
> 
> Confirmed, and I'll update the README to say that is how you can write
> the u-boot.ais in recovery mode.
> 
> > The board boots up fine, but after pressing the reset button or
> > issuing the u-boot "reset" command, it is dead. Only power-cycling
> > helps. Before enabling the SPL framework in this patch reset works
> > fine. Any ideas?
> 
> OK, I don't like the SPL malloc fix from before and I think it just
> masked, partially, a real problem.  The SPI code did not change in the

OK, I get what that fixes now, oops.  But still, something is going on
here, debugging more.

-- 
Tom

[U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK

[Tom Rini]

On Wed, Aug 22, 2012 at 12:19:03PM -0700, Tom Rini wrote:
> On Wed, Aug 22, 2012 at 10:46:19AM -0700, Tom Rini wrote:
> > On Wed, Aug 22, 2012 at 12:04:27PM +0200, Christian Riesch wrote:
> > > Hi Tom,
> > > 
> > > On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com> wrote:
> > > > - Convert the non-relocation part of board_init_f to spl_board_init,
> > > >   turn on CONFIG_SPL_BOARD_INIT in the configs.
> > > > - Remove duplicated code.
> > > > - Add spl_boot_device() that returns the statically chosen boot device.
> > > 
> > > I tested the patchset on the LogicPD AM1808 experimenter's kit:
> > > 
> > > make da850evm
> > > and flashing to SPI flash with
> > > mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 -flash_noubl
> > > u-boot.ais
> > 
> > Confirmed, and I'll update the README to say that is how you can write
> > the u-boot.ais in recovery mode.
> > 
> > > The board boots up fine, but after pressing the reset button or
> > > issuing the u-boot "reset" command, it is dead. Only power-cycling
> > > helps. Before enabling the SPL framework in this patch reset works
> > > fine. Any ideas?
> > 
> > OK, I don't like the SPL malloc fix from before and I think it just
> > masked, partially, a real problem.  The SPI code did not change in the
> 
> OK, I get what that fixes now, oops.  But still, something is going on
> here, debugging more.

OK, got it, and a v3 shortly.  In short, using CONFIG_SPL_BOARD_INIT as
the hook for doing our low-level init isn't completely sufficient, so
I've reworked things a little more and tossed in another hook point.
Now I'm also seeing the initial console output I had been missing.

-- 
Tom

[U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm

[Prabhakar Lad]

CC'ed Sekhar

On Wednesday 22 August 2012 08:39 PM, Christian Riesch wrote:
> Hi Prabhakar,
> 
> On Wednesday, August 22, 2012, Prabhakar Lad wrote:
> 
>     Hi Christian,
> 
>     On Wednesday 22 August 2012 02:47 PM, Christian Riesch wrote:
>     > Hi Prabhakar,
>     >
>     > On Wed, Aug 22, 2012 at 11:07 AM, Prabhakar Lad
>     <prabhakar.lad@ti.com <javascript:;>> wrote:
>     >> Hi,
>     >>
>     >> On Wednesday 22 August 2012 01:43 PM, Christian Riesch wrote:
>     >>> [cc'd Manjunath Hadli]
>     >>>
>     >>> Hi Tom,
>     >>>
>     >>> On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini <trini@ti.com
>     <javascript:;>> wrote:
>     >>>> Add a board-specific README that documents how to write
>     u-boot.ais to
>     >>>> the SPI found on this board.
>     >>>>
>     >>>> Changes-series: 2
>     >>>> - Add
>     >>>>
>     >>>> Signed-off-by: Tom Rini <trini@ti.com <javascript:;>>
>     >>>> ---
>     >>>>
>     >>>>  board/davinci/da8xxevm/README.da850_am18xxevm |   53
>     +++++++++++++++++++++++++
>     >>>>  1 file changed, 53 insertions(+)
>     >>>>  create mode 100644 board/davinci/da8xxevm/README.da850_am18xxevm
>     >>>>
>     >>>> diff --git a/board/davinci/da8xxevm/README.da850_am18xxevm
>     b/board/davinci/da8xxevm/README.da850_am18xxevm
>     >>>> new file mode 100644
>     >>>> index 0000000..382b718
>     >>>> --- /dev/null
>     >>>> +++ b/board/davinci/da8xxevm/README.da850_am18xxevm
>     >>>> @@ -0,0 +1,53 @@
>     >>>> +Summary
>     >>>> +=======
>     >>>> +The README is for the boot procedure used for the LogicPD
>     AM1808 EVM.
>     >>>> +
>     >>>> +The board is booted in three stages. The initial bootloader
>     which executes
>     >>>> +upon reset is the Rom Boot Loader(RBL) which sits in the
>     internal ROM. The
>     >>>> +RBL initialises the memory and the SPI controller and reads
>     the AIS image
>     >>>> +starting at block 0.  This image can contain both the SPL and
>     U-Boot
>     >>>> +binaries.
>     >>>> +
>     >>>> +AIS is an image format defined by TI for the images that are to be
>     >>>> +loaded to memory by the RBL. The image is divided into a series of
>     >>>> +sections and the image's entry point is specified. Each
>     section comes
>     >>>> +with meta data like the target address the section is to be
>     copied to
>     >>>> +and the size of the section, which is used by the RBL to load the
>     >>>> +image. At the end of the image the RBL jumps to the image entry
>     >>>> +point.
>     >>>> +
>     >>>> +The secondary stage bootloader(spl) which is loaded by the RBL
>     then loads
>     >>>> +the u-boot from a predefined location in SPI to DDR and jumps
>     to the u-boot
>     >>>> +entry point.
>     >>>> +
>     >>>> +
>     >>>> +Compilation
>     >>>> +===========
>     >>>> +To build a SPI-bootable image, run 'make da850_am18xxevm'.
>      This will build
>     >>>
>     >>> da850_am18xxevm is for the Spectrum Digital EVM for the AM1808. For
>     >>> the Logic PD board you will need 'make da850evm'. See [1]
>     >>>
>     >>   May be having a common README for am18x and omap-l138 would be
>     good ?
>     >>
>     >
>     > This is a good idea.
>     >
>     > But just to make it clear: Afaik the da850evm configuration works for
>     > both the AM1808 and the OMAP-L138 board from LogicPD (at least I am
>     > using it with the AM1808 experimenter's kit from LogicPD). The
>     > da850_am18xxevm is for the Spectrum Digital board. At least this is
>     > what I understood from the discussion with Manjunath Hadli in the in
>     > the u-boot mailing list thread I cited earlier. I hope this is
>     > correct, I haven't got other boards than the AM1808 board from LogicPD
>     > to test.
>     >
>     AFAIK the difference between AM1808 and OMAP-L138 is that,
>     1: The AM1808 has EEPROM and stores the MAC address in it where as
>     OMAP-L138 stores the MAC address in SPI flash.
> 
> 
> Are you sure? I don't see that in datasheets/schematics.
> 
  Can you help here ?

Thx,
--Prabhakar

> Christian
> 
>  
> 
>     2: The revision number differs for both.
> 
>     Thx,
>     --Prabhakar
> 
> 
> 
>  
> 
>     > Regards, Christian
>     >
> 
>     _______________________________________________
>     U-Boot mailing list
>     U-Boot at lists.denx.de <javascript:;>
>     http://lists.denx.de/mailman/listinfo/u-boot
> 

[U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c

[Scott Wood]

On 08/20/2012 11:45 AM, Tom Rini wrote:
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 29dc20e..5475c8c 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -27,12 +27,7 @@ LIB	:= $(obj)libnand.o
>  
>  ifdef CONFIG_CMD_NAND
>  ifdef CONFIG_SPL_BUILD
> -ifdef CONFIG_SPL_NAND_SIMPLE
> -COBJS-y += nand_spl_simple.o
> -endif
> -ifdef CONFIG_SPL_NAND_LOAD
> -COBJS-y	+= nand_spl_load.o
> -endif
> +COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o nand_spl_load.o

OK, I was wrong, I will complain. :-)

The commit message didn't mention you were changing
CONFIG_SPL_NAND_SIMPLE.  That needs to be able to support small SPLs.
Is your new "enhanced" nand_spl_load small enough (with proper
configuration) to work with all the SPLs that currently use
nand_spl/nand_boot.c (e.g. PPC 44x)?

-Scott

[U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c

[Scott Wood]

On 08/24/2012 04:09 PM, Scott Wood wrote:
> On 08/20/2012 11:45 AM, Tom Rini wrote:
>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
>> index 29dc20e..5475c8c 100644
>> --- a/drivers/mtd/nand/Makefile
>> +++ b/drivers/mtd/nand/Makefile
>> @@ -27,12 +27,7 @@ LIB	:= $(obj)libnand.o
>>  
>>  ifdef CONFIG_CMD_NAND
>>  ifdef CONFIG_SPL_BUILD
>> -ifdef CONFIG_SPL_NAND_SIMPLE
>> -COBJS-y += nand_spl_simple.o
>> -endif
>> -ifdef CONFIG_SPL_NAND_LOAD
>> -COBJS-y	+= nand_spl_load.o
>> -endif
>> +COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o nand_spl_load.o
> 
> OK, I was wrong, I will complain. :-)
> 
> The commit message didn't mention you were changing
> CONFIG_SPL_NAND_SIMPLE.  That needs to be able to support small SPLs.
> Is your new "enhanced" nand_spl_load small enough (with proper
> configuration) to work with all the SPLs that currently use
> nand_spl/nand_boot.c (e.g. PPC 44x)?

Oh, and please CC me on NAND patches so that I can see them sooner.

-Scott

[U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c

[Tom Rini]

On Fri, Aug 24, 2012 at 04:10:44PM -0500, Scott Wood wrote:
> On 08/24/2012 04:09 PM, Scott Wood wrote:
> > On 08/20/2012 11:45 AM, Tom Rini wrote:
> >> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> >> index 29dc20e..5475c8c 100644
> >> --- a/drivers/mtd/nand/Makefile
> >> +++ b/drivers/mtd/nand/Makefile
> >> @@ -27,12 +27,7 @@ LIB	:= $(obj)libnand.o
> >>  
> >>  ifdef CONFIG_CMD_NAND
> >>  ifdef CONFIG_SPL_BUILD
> >> -ifdef CONFIG_SPL_NAND_SIMPLE
> >> -COBJS-y += nand_spl_simple.o
> >> -endif
> >> -ifdef CONFIG_SPL_NAND_LOAD
> >> -COBJS-y	+= nand_spl_load.o
> >> -endif
> >> +COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o nand_spl_load.o
> > 
> > OK, I was wrong, I will complain. :-)
> > 
> > The commit message didn't mention you were changing
> > CONFIG_SPL_NAND_SIMPLE.  That needs to be able to support small SPLs.
> > Is your new "enhanced" nand_spl_load small enough (with proper
> > configuration) to work with all the SPLs that currently use
> > nand_spl/nand_boot.c (e.g. PPC 44x)?
> 
> Oh, and please CC me on NAND patches so that I can see them sooner.

Should have put nand in there for patman, sorry.

-- 
Tom

[U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c

[Tom Rini]

On Fri, Aug 24, 2012 at 04:09:13PM -0500, Scott Wood wrote:
> On 08/20/2012 11:45 AM, Tom Rini wrote:
> > diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> > index 29dc20e..5475c8c 100644
> > --- a/drivers/mtd/nand/Makefile
> > +++ b/drivers/mtd/nand/Makefile
> > @@ -27,12 +27,7 @@ LIB	:= $(obj)libnand.o
> >  
> >  ifdef CONFIG_CMD_NAND
> >  ifdef CONFIG_SPL_BUILD
> > -ifdef CONFIG_SPL_NAND_SIMPLE
> > -COBJS-y += nand_spl_simple.o
> > -endif
> > -ifdef CONFIG_SPL_NAND_LOAD
> > -COBJS-y	+= nand_spl_load.o
> > -endif
> > +COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o nand_spl_load.o
> 
> OK, I was wrong, I will complain. :-)
> 
> The commit message didn't mention you were changing
> CONFIG_SPL_NAND_SIMPLE.  That needs to be able to support small SPLs.
> Is your new "enhanced" nand_spl_load small enough (with proper
> configuration) to work with all the SPLs that currently use
> nand_spl/nand_boot.c (e.g. PPC 44x)?

OK, I suspect it would be close-to-fail.  There's a "few" bytes overhead
to parse the header and so forth, but it also allows for direct Linux
booting.  Is that something you want for these machines or no?  It
wouldn't be hard to put the enhanced version nand_spl_simple.c and leave
nand_spl_load.c alone.

-- 
Tom

[U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c

[Scott Wood]

On 08/24/2012 04:20 PM, Tom Rini wrote:
> On Fri, Aug 24, 2012 at 04:09:13PM -0500, Scott Wood wrote:
>> On 08/20/2012 11:45 AM, Tom Rini wrote:
>>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
>>> index 29dc20e..5475c8c 100644
>>> --- a/drivers/mtd/nand/Makefile
>>> +++ b/drivers/mtd/nand/Makefile
>>> @@ -27,12 +27,7 @@ LIB	:= $(obj)libnand.o
>>>  
>>>  ifdef CONFIG_CMD_NAND
>>>  ifdef CONFIG_SPL_BUILD
>>> -ifdef CONFIG_SPL_NAND_SIMPLE
>>> -COBJS-y += nand_spl_simple.o
>>> -endif
>>> -ifdef CONFIG_SPL_NAND_LOAD
>>> -COBJS-y	+= nand_spl_load.o
>>> -endif
>>> +COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o nand_spl_load.o
>>
>> OK, I was wrong, I will complain. :-)
>>
>> The commit message didn't mention you were changing
>> CONFIG_SPL_NAND_SIMPLE.  That needs to be able to support small SPLs.
>> Is your new "enhanced" nand_spl_load small enough (with proper
>> configuration) to work with all the SPLs that currently use
>> nand_spl/nand_boot.c (e.g. PPC 44x)?
> 
> OK, I suspect it would be close-to-fail.  There's a "few" bytes overhead
> to parse the header and so forth, but it also allows for direct Linux
> booting.  Is that something you want for these machines or no?

I don't think there's room for any new features at all.  The SPL must
fit in 4K.  Canyonlands is at 4020 bytes currently.

Why can't the new functionality be conditionally built?

> It wouldn't be hard to put the enhanced version nand_spl_simple.c and leave
> nand_spl_load.c alone.

nand_spl_simple.c is what I'm talking about needing to not expand.  Why
does the new stuff need to be bound to a specific NAND boot implementation?

-Scott

[U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c

[Tom Rini]

On Fri, Aug 24, 2012 at 04:30:45PM -0500, Scott Wood wrote:
> On 08/24/2012 04:20 PM, Tom Rini wrote:
> > On Fri, Aug 24, 2012 at 04:09:13PM -0500, Scott Wood wrote:
> >> On 08/20/2012 11:45 AM, Tom Rini wrote:
> >>> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> >>> index 29dc20e..5475c8c 100644
> >>> --- a/drivers/mtd/nand/Makefile
> >>> +++ b/drivers/mtd/nand/Makefile
> >>> @@ -27,12 +27,7 @@ LIB	:= $(obj)libnand.o
> >>>  
> >>>  ifdef CONFIG_CMD_NAND
> >>>  ifdef CONFIG_SPL_BUILD
> >>> -ifdef CONFIG_SPL_NAND_SIMPLE
> >>> -COBJS-y += nand_spl_simple.o
> >>> -endif
> >>> -ifdef CONFIG_SPL_NAND_LOAD
> >>> -COBJS-y	+= nand_spl_load.o
> >>> -endif
> >>> +COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o nand_spl_load.o
> >>
> >> OK, I was wrong, I will complain. :-)
> >>
> >> The commit message didn't mention you were changing
> >> CONFIG_SPL_NAND_SIMPLE.  That needs to be able to support small SPLs.
> >> Is your new "enhanced" nand_spl_load small enough (with proper
> >> configuration) to work with all the SPLs that currently use
> >> nand_spl/nand_boot.c (e.g. PPC 44x)?
> > 
> > OK, I suspect it would be close-to-fail.  There's a "few" bytes overhead
> > to parse the header and so forth, but it also allows for direct Linux
> > booting.  Is that something you want for these machines or no?
> 
> I don't think there's room for any new features at all.  The SPL must
> fit in 4K.  Canyonlands is at 4020 bytes currently.
> 
> Why can't the new functionality be conditionally built?

I'm not sure there would be a point.  The nand_boot() method is read
u-boot.bin from nand, read env from nand and read redundant env from
nand, boot u-boot.  The spl_nand_load_image method doesn't boot u-boot,
reads the image header, parses, reads the image.  In short, I don't
think a modified version would gain us anything more than a lot of
complex #ifdefs :(

> > It wouldn't be hard to put the enhanced version nand_spl_simple.c and leave
> > nand_spl_load.c alone.
> 
> nand_spl_simple.c is what I'm talking about needing to not expand.  Why
> does the new stuff need to be bound to a specific NAND boot implementation?

Sorry, I got it backwards.  I mean (and did locally) leave the very tiny
and simple approach alone, add to the version where we have a little,
but not a lot, of space.

-- 
Tom