From: Dong Aisheng <b29396@freescale.com>
To: <linux-kernel@vger.kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linus.walleij@stericsson.com>, <s.hauer@pengutronix.de>,
<shawn.guo@linaro.org>, <kernel@pengutronix.de>,
<grant.likely@secretlab.ca>, <rob.herring@calxeda.com>,
<sameo@linux.intel.com>, <lrg@ti.com>,
<broonie@opensource.wolfsonmicro.com>,
<richard.zhao@freescale.com>,
<devicetree-discuss@lists.ozlabs.org>, <swarren@wwwdotorg.org>
Subject: [PATCH v4 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Date: Wed, 29 Aug 2012 18:56:57 +0800 [thread overview]
Message-ID: <1346237818-9498-7-git-send-email-b29396@freescale.com> (raw)
In-Reply-To: <1346237818-9498-1-git-send-email-b29396@freescale.com>
From: Dong Aisheng <dong.aisheng@linaro.org>
Originally the anatop regulator devices are populated by mfd anatop driver.
Since mfd anatop driver will be deleted later, we change to populate the
regulator devices by devicetree automatically.
This will cause some warning messages as follows during boot due to device
recreation: "vdd1p1: Failed to create debugfs directory"
But it does not break any function.
Later, we will remove mfd anatop driver which can get rid of this
error message.
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
---
arch/arm/boot/dts/imx6q.dtsi | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index db3fa15..52ed4d1 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -379,7 +379,7 @@
};
anatop: anatop@020c8000 {
- compatible = "fsl,imx6q-anatop", "syscon";
+ compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: Dong Aisheng <b29396@freescale.com>
To: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linus.walleij@stericsson.com, s.hauer@pengutronix.de,
shawn.guo@linaro.org, kernel@pengutronix.de,
grant.likely@secretlab.ca, rob.herring@calxeda.com,
sameo@linux.intel.com, lrg@ti.com,
broonie@opensource.wolfsonmicro.com, richard.zhao@freescale.com,
devicetree-discuss@lists.ozlabs.org, swarren@wwwdotorg.org
Subject: [PATCH v4 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Date: Wed, 29 Aug 2012 18:56:57 +0800 [thread overview]
Message-ID: <1346237818-9498-7-git-send-email-b29396@freescale.com> (raw)
In-Reply-To: <1346237818-9498-1-git-send-email-b29396@freescale.com>
From: Dong Aisheng <dong.aisheng@linaro.org>
Originally the anatop regulator devices are populated by mfd anatop driver.
Since mfd anatop driver will be deleted later, we change to populate the
regulator devices by devicetree automatically.
This will cause some warning messages as follows during boot due to device
recreation: "vdd1p1: Failed to create debugfs directory"
But it does not break any function.
Later, we will remove mfd anatop driver which can get rid of this
error message.
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
---
arch/arm/boot/dts/imx6q.dtsi | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index db3fa15..52ed4d1 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -379,7 +379,7 @@
};
anatop: anatop@020c8000 {
- compatible = "fsl,imx6q-anatop", "syscon";
+ compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: b29396@freescale.com (Dong Aisheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Date: Wed, 29 Aug 2012 18:56:57 +0800 [thread overview]
Message-ID: <1346237818-9498-7-git-send-email-b29396@freescale.com> (raw)
In-Reply-To: <1346237818-9498-1-git-send-email-b29396@freescale.com>
From: Dong Aisheng <dong.aisheng@linaro.org>
Originally the anatop regulator devices are populated by mfd anatop driver.
Since mfd anatop driver will be deleted later, we change to populate the
regulator devices by devicetree automatically.
This will cause some warning messages as follows during boot due to device
recreation: "vdd1p1: Failed to create debugfs directory"
But it does not break any function.
Later, we will remove mfd anatop driver which can get rid of this
error message.
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
---
arch/arm/boot/dts/imx6q.dtsi | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index db3fa15..52ed4d1 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -379,7 +379,7 @@
};
anatop: anatop at 020c8000 {
- compatible = "fsl,imx6q-anatop", "syscon";
+ compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
--
1.7.0.4
next prev parent reply other threads:[~2012-08-29 11:18 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-29 10:56 [PATCH v4 0/7] add syscon driver based on regmap for general registers access Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` [PATCH v4 1/7] mfd: add syscon driver based on regmap Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-31 1:26 ` Shawn Guo
2012-08-31 1:26 ` Shawn Guo
2012-08-31 1:26 ` Shawn Guo
2012-09-03 2:31 ` Dong Aisheng
2012-09-03 2:31 ` Dong Aisheng
2012-09-03 2:31 ` Dong Aisheng
2012-09-03 3:09 ` Shawn Guo
2012-09-03 3:09 ` Shawn Guo
2012-09-03 3:09 ` Shawn Guo
2012-09-03 8:02 ` Dong Aisheng
2012-09-03 8:02 ` Dong Aisheng
2012-09-03 8:02 ` Dong Aisheng
2012-08-29 10:56 ` [PATCH v4 2/7] ARM: imx6q: add iomuxc gpr support into syscon Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-31 2:02 ` Shawn Guo
2012-08-31 2:02 ` Shawn Guo
2012-08-31 2:02 ` Shawn Guo
2012-09-03 2:46 ` Dong Aisheng
2012-09-03 2:46 ` Dong Aisheng
2012-09-03 2:46 ` Dong Aisheng
2012-08-29 10:56 ` [PATCH v4 3/7] ARM: imx6q: add anatop " Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` [PATCH v4 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` [PATCH v4 5/7] ARM: imx6q: convert to use syscon to access anatop registers Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng [this message]
2012-08-29 10:56 ` [PATCH v4 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` [PATCH v4 7/7] mfd: anatop-mfd: remove anatop driver Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-29 10:56 ` Dong Aisheng
2012-08-31 1:39 ` Shawn Guo
2012-08-31 1:39 ` Shawn Guo
2012-08-31 1:39 ` Shawn Guo
2012-09-03 2:34 ` Dong Aisheng
2012-09-03 2:34 ` Dong Aisheng
2012-09-03 2:34 ` Dong Aisheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346237818-9498-7-git-send-email-b29396@freescale.com \
--to=b29396@freescale.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@stericsson.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=richard.zhao@freescale.com \
--cc=rob.herring@calxeda.com \
--cc=s.hauer@pengutronix.de \
--cc=sameo@linux.intel.com \
--cc=shawn.guo@linaro.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.