All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 6/6] davinci: ea20: add some configs and default environmet variables
Date: Thu, 6 Sep 2012 08:07:39 +0200	[thread overview]
Message-ID: <1346911659-3080-6-git-send-email-Bastian.Ruppert@Sewerin.de> (raw)
In-Reply-To: <1346538565-1821-1-git-send-email-agust@denx.de>

Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: Tom Rini <trini@ti.com>
Acked-by: Stefano Babic <sbabic@denx.de>
---
 include/configs/ea20.h |  106 ++++++++++++++++++++++++++++++------------------
 1 files changed, 66 insertions(+), 40 deletions(-)

diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index f9a1462..373db74 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -30,6 +30,7 @@
 #define CONFIG_USE_SPIFLASH
 #define	CONFIG_SYS_USE_NAND
 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_DRIVER_TI_EMAC_RMII_NONEG
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_VIDEO
@@ -98,6 +99,7 @@
  * Network & Ethernet Configuration
  */
 #ifdef CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM	0
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_DNS
@@ -121,9 +123,11 @@
 #define CONFIG_VIDEO_DA8XX
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_VIDEO_LOGO
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_CMD_BMP
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
@@ -197,6 +201,7 @@
 
 #define CONFIG_NAND_DAVINCI
 #define	CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_NAND_NO_SUBPAGE
 #define CONFIG_SYS_NAND_CS		2
 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 #undef CONFIG_SYS_NAND_HW_ECC
@@ -235,31 +240,39 @@
 #define xstr(s)	str(s)
 #define str(s)	#s
 
-
 #define CONFIG_HOSTNAME ea20
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"as=3\0"							\
-	"netdev=eth0\0"							\
+	"netdev=eth0\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"rfsbargs=setenv bootargs root=/dev/nfs rw "			\
 	"nfsroot=${serverip}:${rfsbpath}\0"				\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"mtdids=nand0=davinci_nand.0\0"					\
-	"mtdparts=mtdparts=davinci_nand.0:8m(Settings),8m(aKernel),"	\
-	"8m(bKernel),76m(aRootfs),76m(bRootfs),-(MassSD)\0"		\
+	"testrfsargs=setenv bootargs root=/dev/nfs rw "		\
+	"nfsroot=${serverip}:${testrfspath}\0"				\
+	"ramargs=setenv bootargs root=/dev/ram rw initrd="		\
+	"0x${ramdisk_addr_r},4M\0"					\
+	"mtdids=nand0=davinci_nand.0\0"				\
+	"serverip=192.168.5.249\0"					\
+	"ipaddr=192.168.5.248\0"					\
+	"rootpath=/opt/eldk/arm\0"					\
+	"splashpos=230,180\0"						\
+	"testrfspath=/opt/eldk/test_arm\0"				\
+	"tempmac=setenv ethaddr 02:ea:20:ff:ff:ff\0"			\
 	"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc "	\
 	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
+	"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc "	\
+	"ubi.mtd=${as} root=ubi0:rootfs\0"				\
 	"addip_sta=setenv bootargs ${bootargs} "			\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
+	"addip=if test -n ${ipdyn};then run addip_dyn;"		\
 		"else run addip_sta;fi\0"				\
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addtty=setenv bootargs ${bootargs}"				\
 		" console=${consoledev},${baudrate}n8\0"		\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
+	"addmisc=setenv bootargs ${bootargs} ${misc}\0"		\
 	"addmem=setenv bootargs ${bootargs} mem=${memory}\0"		\
 	"consoledev=ttyS0\0"						\
 	"loadaddr=c0000014\0"						\
@@ -267,44 +280,57 @@
 	"kernel_addr_r=c0700000\0"					\
 	"hostname=" xstr(CONFIG_HOSTNAME) "\0"				\
 	"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"			\
-	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"		\
+	"ramdisk_file=" xstr(CONFIG_HOSTNAME) "/image.ext2\0"		\
 	"flash_self=run ramargs addip addtty addmtd addmisc addmem;"	\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+			"bootm ${kernel_addr_r}\0"			\
 	"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"	\
 		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
 		"run nfsargs addip addtty addmtd addmisc addmem;"	\
-		"bootm ${kernel_addr_r}\0"                              \
-	"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "                  \
-		"run rfsbargs addip addtty addmtd addmisc addmem; "     \
-		"bootm ${kernel_addr_r}\0"                              \
+		"bootm ${kernel_addr_r}\0"				\
+	"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; "			\
+		"run rfsbargs addip addtty addmtd addmisc addmem; "	\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; "		\
+		"run testrfsargs addip addtty addmtd addmisc addmem; "	\
+		"bootm ${kernel_addr_r}\0"				\
 	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
 		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
-	"nand_nand=ubi part nand0,${as};ubifsmount rootfs;"             \
-		"ubifsload ${kernel_addr_r} /boot/uImage;"              \
-		"ubifsumount; run nandargs addip addtty "               \
-		"addmtd addmisc addmem;bootm ${kernel_addr_r}\0"        \
-	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
-	"load_magic=if sf probe 0;then sf "                             \
-		"read c0000000 0x10000 0x60000;fi\0"                    \
-	"load_nand=ubi part nand0,${as};ubifsmount rootfs;"             \
-		"if ubifsload c0000014 /boot/u-boot.bin;"               \
-		"then mw c0000008 ${filesize};else echo Error reading " \
-		"u-boot from nand!;fi\0"                                \
-	"load_net=if sf probe 0;then sf read c0000000 0x10000 0x60000;"	\
-		"tftp c0000014 ${u-boot};"				\
-		"mw c0000008 ${filesize};"				\
-		"fi\0"		                                        \
-	"upd=if sf probe 0;then sf erase 10000 60000;"		        \
-		"sf write c0000000 10000 60000;"			\
-		"fi\0"							\
-	"ubootupd_net=if run load_net;then echo Updating u-boot;"       \
-		"if run upd; then echo U-Boot updated;"			\
+	"nand_nand=ubi part nand0,${as};ubifsmount rootfs;"		\
+		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
+		"ubifsumount; run nandargs addip addtty "		\
+		"addmtd addmisc addmem;clrlogo;"			\
+		"bootm ${kernel_addr_r}\0"				\
+	"nand_nandrw=ubi part nand0,${as};ubifsmount rootfs;"		\
+		"ubifsload ${kernel_addr_r} /boot/uImage;"		\
+		"ubifsumount; run nandrwargs addip addtty "		\
+		"addmtd addmisc addmem;clrlogo;"			\
+		"bootm ${kernel_addr_r}\0"				\
+	"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"	\
+		" addip addtty addmtd addmisc addmem;"			\
+		"clrlogo;bootm ${kernel_addr_r}\0"			\
+	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"load_magic=if sf probe 0;then sf "				\
+		"read c0000000 0x10000 0x60000;fi\0"			\
+	"load_nand=ubi part nand0,${as};ubifsmount rootfs;"		\
+		"if ubifsload c0000014 /boot/u-boot.bin;"		\
+		"then mw c0000008 ${filesize};else echo Error reading"	\
+		" u-boot from nand!;fi\0"				\
+	"load_net=if sf probe 0;then sf read c0000000 0x10000 "	\
+		"0x60000;tftp c0000014 ${u-boot};"			\
+		"mw c0000008 ${filesize};fi\0"				\
+	"upd=if sf probe 0;then sf erase 10000 60000;"			\
+		"sf write c0000000 10000 60000;fi\0"			\
+	"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; "	\
+		"sf erase 0 10000;"					\
+		"sf write 0xc0700000 0 ${filesize};fi\0"		\
+	"ubootupd_net=if run load_net;then echo Updating u-boot;"	\
+		"if run upd; then echo U-Boot updated;"		\
 			"else echo Error updating u-boot !;"		\
 			"echo Board without bootloader !!;"		\
 		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"		\
-	"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"    \
-	"bootcmd=run net_nfs\0"
+		"else echo U-Boot not downloaded..exiting;fi\0"	\
+	"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0"	\
+	"bootcmd=run tempmac;run net_testrfs\0"
 
 #endif /* __CONFIG_H */
-- 
1.7.0.4

  parent reply	other threads:[~2012-09-06  6:07 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-10  7:26 [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup Bastian Ruppert
2012-08-10  7:26 ` [U-Boot] [PATCH 2/6] davinci: ea20: the console is always set to the serial line Bastian Ruppert
2012-08-15 17:04   ` Stefano Babic
2012-08-10  7:26 ` [U-Boot] [PATCH 3/6] video: cfb_console: logo can be positioned via the splashpos variable Bastian Ruppert
2012-09-01 22:29   ` [U-Boot] [PATCH v2 " Anatolij Gustschin
2012-09-05 10:52     ` Bastian.Ruppert at sewerin.de
2012-09-05 11:11       ` Anatolij Gustschin
2012-09-06  6:07     ` [U-Boot] [PATCH v3 1/6] davinci: ea20: reorganisation LCD startup Bastian Ruppert
2012-09-06  6:07     ` [U-Boot] [PATCH v3 2/6] davinci: ea20: the console is always set to the serial line Bastian Ruppert
2012-09-06  6:07     ` [U-Boot] [PATCH v3 3/6] video: cfb_console: logo can be positioned via the splashpos variable Bastian Ruppert
2012-09-06 18:55       ` Anatolij Gustschin
2012-09-06  6:07     ` [U-Boot] [PATCH v3 4/6] video: cfb_console: add function to plot the logo area black Bastian Ruppert
2012-09-06 18:56       ` Anatolij Gustschin
2012-09-06  6:07     ` [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed Bastian Ruppert
2012-09-07  8:08       ` Prabhakar Lad
2012-09-09  2:14         ` Tom Rini
2012-09-10  6:01           ` Bastian.Ruppert at sewerin.de
2012-09-10 16:08             ` Tom Rini
2012-09-11  4:16               ` Prabhakar Lad
2012-09-11  5:32                 ` Bastian.Ruppert at sewerin.de
2012-09-12 16:15                   ` Tom Rini
2012-09-06  6:07     ` Bastian Ruppert [this message]
2012-09-01 22:50   ` [U-Boot] [PATCH 3/6] video: cfb_console: logo can be positioned via the splashpos variable Anatolij Gustschin
2012-09-05 10:52     ` Bastian.Ruppert at sewerin.de
2012-09-14  8:28     ` [U-Boot] [PATCH v4 1/6] davinci: ea20: reorganisation LCD startup Bastian Ruppert
2012-09-14  8:29     ` [U-Boot] [PATCH v4 2/6] davinci: ea20: the console is always set to the serial line Bastian Ruppert
2012-09-14  8:29     ` [U-Boot] [PATCH v4 3/6] video: cfb_console: logo can be positioned via the splashpos variable Bastian Ruppert
2012-09-14  8:29     ` [U-Boot] [PATCH v4 4/6] video: cfb_console: add function to plot the logo area black Bastian Ruppert
2012-09-14  8:29     ` [U-Boot] [PATCH v4 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed Bastian Ruppert
2012-09-17  5:19       ` Prabhakar Lad
2012-09-14  8:29     ` [U-Boot] [PATCH v4 6/6] davinci: ea20: add some configs and default environmet variables Bastian Ruppert
2012-08-10  7:26 ` [U-Boot] [PATCH 4/6] video: cfb_console: add function to plot the logo area black Bastian Ruppert
2012-08-10  7:26 ` [U-Boot] [PATCH 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed Bastian Ruppert
2012-08-15 17:04   ` Stefano Babic
2012-08-10  7:26 ` [U-Boot] [PATCH 6/6] davinci: ea20: add some configs and default environmet variables Bastian Ruppert
2012-08-15 17:03   ` Stefano Babic
2012-08-15 16:55 ` [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup Tom Rini
2012-08-24 17:55   ` Tom Rini
2012-09-07  4:48     ` Bastian.Ruppert at sewerin.de
2012-08-15 17:04 ` Stefano Babic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346911659-3080-6-git-send-email-Bastian.Ruppert@Sewerin.de \
    --to=bastian.ruppert@sewerin.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.