* [PATCH 00/17] Misc OMAP DSS patches part 2
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
This series contains miscellaneous patches for omapdss. These are based on the
previous misc patches series
(http://www.mail-archive.com/linux-omap@vger.kernel.org/msg74279.html).
Some cleanups, but three a bit more important things:
* vram.c no longer uses OMAP's sDMA to clear the memory
* fifomerge has been reverted
* Swap GFX and WB fifos to avoid underflows
Tomi
Tomi Valkeinen (17):
OMAPDSS: Taal: use devm_* functions
OMAPFB1: remove unnecessary includes
OMAPFB1: remove a non-used table
OMAPDSS: remove unnecessary includes
OMAPFB: clear framebuffers with CPU
OMAPDSS: VRAM: Remove clearing with sDMA
OMAPDSS: Taal: Reogranize for device tree
OMAPDSS: TFP410: use devm_gpio_request_one
OMAPDSS: split overlay sysfs code
OMAPDSS: split manager sysfs code
OMAPDSS: clean up dss_mgr_set_lcd_config
OMAPDSS: clean up dss_mgr_set_timings
Revert "OMAPDSS: APPLY: add fifo-merge support"
Revert "OMAPDSS: APPLY: add fifo merge support funcs"
OMAPDSS: remove extra_info completion code
OMAPDSS: Improve fifo management code
OMAPDSS: Use WB fifo for GFX overlay
drivers/video/omap/hwa742.c | 1 -
drivers/video/omap/lcd_ams_delta.c | 1 -
drivers/video/omap/lcd_palmte.c | 1 -
drivers/video/omap/omapfb_main.c | 9 -
drivers/video/omap2/displays/panel-taal.c | 215 ++++++------
drivers/video/omap2/displays/panel-tfp410.c | 14 +-
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/apply.c | 298 +---------------
drivers/video/omap2/dss/dispc.c | 68 +++-
drivers/video/omap2/dss/dispc.h | 4 +
drivers/video/omap2/dss/dpi.c | 1 -
drivers/video/omap2/dss/dsi.c | 1 -
drivers/video/omap2/dss/dss.c | 1 -
drivers/video/omap2/dss/dss.h | 7 +
drivers/video/omap2/dss/manager-sysfs.c | 499 +++++++++++++++++++++++++++
drivers/video/omap2/dss/manager.c | 462 +------------------------
drivers/video/omap2/dss/overlay-sysfs.c | 456 ++++++++++++++++++++++++
drivers/video/omap2/dss/overlay.c | 421 +---------------------
drivers/video/omap2/dss/venc.c | 1 -
drivers/video/omap2/omapfb/omapfb-main.c | 26 ++
drivers/video/omap2/vram.c | 56 ---
include/video/omapdss.h | 1 +
22 files changed, 1180 insertions(+), 1365 deletions(-)
create mode 100644 drivers/video/omap2/dss/manager-sysfs.c
create mode 100644 drivers/video/omap2/dss/overlay-sysfs.c
--
1.7.9.5
^ permalink raw reply [flat|nested] 66+ messages in thread
* [PATCH 00/17] Misc OMAP DSS patches part 2
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
This series contains miscellaneous patches for omapdss. These are based on the
previous misc patches series
(http://www.mail-archive.com/linux-omap@vger.kernel.org/msg74279.html).
Some cleanups, but three a bit more important things:
* vram.c no longer uses OMAP's sDMA to clear the memory
* fifomerge has been reverted
* Swap GFX and WB fifos to avoid underflows
Tomi
Tomi Valkeinen (17):
OMAPDSS: Taal: use devm_* functions
OMAPFB1: remove unnecessary includes
OMAPFB1: remove a non-used table
OMAPDSS: remove unnecessary includes
OMAPFB: clear framebuffers with CPU
OMAPDSS: VRAM: Remove clearing with sDMA
OMAPDSS: Taal: Reogranize for device tree
OMAPDSS: TFP410: use devm_gpio_request_one
OMAPDSS: split overlay sysfs code
OMAPDSS: split manager sysfs code
OMAPDSS: clean up dss_mgr_set_lcd_config
OMAPDSS: clean up dss_mgr_set_timings
Revert "OMAPDSS: APPLY: add fifo-merge support"
Revert "OMAPDSS: APPLY: add fifo merge support funcs"
OMAPDSS: remove extra_info completion code
OMAPDSS: Improve fifo management code
OMAPDSS: Use WB fifo for GFX overlay
drivers/video/omap/hwa742.c | 1 -
drivers/video/omap/lcd_ams_delta.c | 1 -
drivers/video/omap/lcd_palmte.c | 1 -
drivers/video/omap/omapfb_main.c | 9 -
drivers/video/omap2/displays/panel-taal.c | 215 ++++++------
drivers/video/omap2/displays/panel-tfp410.c | 14 +-
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/apply.c | 298 +---------------
drivers/video/omap2/dss/dispc.c | 68 +++-
drivers/video/omap2/dss/dispc.h | 4 +
drivers/video/omap2/dss/dpi.c | 1 -
drivers/video/omap2/dss/dsi.c | 1 -
drivers/video/omap2/dss/dss.c | 1 -
drivers/video/omap2/dss/dss.h | 7 +
drivers/video/omap2/dss/manager-sysfs.c | 499 +++++++++++++++++++++++++++
drivers/video/omap2/dss/manager.c | 462 +------------------------
drivers/video/omap2/dss/overlay-sysfs.c | 456 ++++++++++++++++++++++++
drivers/video/omap2/dss/overlay.c | 421 +---------------------
drivers/video/omap2/dss/venc.c | 1 -
drivers/video/omap2/omapfb/omapfb-main.c | 26 ++
drivers/video/omap2/vram.c | 56 ---
include/video/omapdss.h | 1 +
22 files changed, 1180 insertions(+), 1365 deletions(-)
create mode 100644 drivers/video/omap2/dss/manager-sysfs.c
create mode 100644 drivers/video/omap2/dss/overlay-sysfs.c
--
1.7.9.5
^ permalink raw reply [flat|nested] 66+ messages in thread
* [PATCH 01/17] OMAPDSS: Taal: use devm_* functions
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Use devm_ functions in panel-taal.c's probe when possible. Also reorder
the initialization sequence so that devm_ allocations are done before
things that require explicit freeing. This simplifies the probe and
remove functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays/panel-taal.c | 118 +++++++++++------------------
1 file changed, 44 insertions(+), 74 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 7b2d7bb..1255864 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -865,10 +865,8 @@ static int taal_probe(struct omap_dss_device *dssdev)
dev_dbg(&dssdev->dev, "probe\n");
- if (!panel_data || !panel_data->name) {
- r = -EINVAL;
- goto err;
- }
+ if (!panel_data || !panel_data->name)
+ return -EINVAL;
for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
if (strcmp(panel_data->name, panel_configs[i].name) = 0) {
@@ -877,21 +875,17 @@ static int taal_probe(struct omap_dss_device *dssdev)
}
}
- if (!panel_config) {
- r = -EINVAL;
- goto err;
- }
+ if (!panel_config)
+ return -EINVAL;
dssdev->panel.timings = panel_config->timings;
dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
- td = kzalloc(sizeof(*td), GFP_KERNEL);
- if (!td) {
- r = -ENOMEM;
- goto err;
- }
+ td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
+ if (!td)
+ return -ENOMEM;
td->dssdev = dssdev;
td->panel_config = panel_config;
td->esd_interval = panel_data->esd_interval;
@@ -902,26 +896,51 @@ static int taal_probe(struct omap_dss_device *dssdev)
atomic_set(&td->do_update, 0);
- td->workqueue = create_singlethread_workqueue("taal_esd");
- if (td->workqueue = NULL) {
- dev_err(&dssdev->dev, "can't create ESD workqueue\n");
- r = -ENOMEM;
- goto err_wq;
- }
- INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
- INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
-
dev_set_drvdata(&dssdev->dev, td);
if (gpio_is_valid(panel_data->reset_gpio)) {
- r = gpio_request_one(panel_data->reset_gpio, GPIOF_OUT_INIT_LOW,
- "taal rst");
+ r = devm_gpio_request_one(&dssdev->dev, panel_data->reset_gpio,
+ GPIOF_OUT_INIT_LOW, "taal rst");
if (r) {
dev_err(&dssdev->dev, "failed to request reset gpio\n");
- goto err_rst_gpio;
+ return r;
}
}
+ if (panel_data->use_ext_te) {
+ int gpio = panel_data->ext_te_gpio;
+
+ r = devm_gpio_request_one(&dssdev->dev, gpio, GPIOF_IN,
+ "taal irq");
+ if (r) {
+ dev_err(&dssdev->dev, "GPIO request failed\n");
+ return r;
+ }
+
+ r = devm_request_irq(&dssdev->dev, gpio_to_irq(gpio),
+ taal_te_isr,
+ IRQF_TRIGGER_RISING,
+ "taal vsync", dssdev);
+
+ if (r) {
+ dev_err(&dssdev->dev, "IRQ request failed\n");
+ return r;
+ }
+
+ INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
+ taal_te_timeout_work_callback);
+
+ dev_dbg(&dssdev->dev, "Using GPIO TE\n");
+ }
+
+ td->workqueue = create_singlethread_workqueue("taal_esd");
+ if (td->workqueue = NULL) {
+ dev_err(&dssdev->dev, "can't create ESD workqueue\n");
+ return -ENOMEM;
+ }
+ INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
+ INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
+
taal_hw_reset(dssdev);
if (panel_data->use_dsi_backlight) {
@@ -945,31 +964,6 @@ static int taal_probe(struct omap_dss_device *dssdev)
taal_bl_update_status(bldev);
}
- if (panel_data->use_ext_te) {
- int gpio = panel_data->ext_te_gpio;
-
- r = gpio_request_one(gpio, GPIOF_IN, "taal irq");
- if (r) {
- dev_err(&dssdev->dev, "GPIO request failed\n");
- goto err_gpio;
- }
-
- r = request_irq(gpio_to_irq(gpio), taal_te_isr,
- IRQF_TRIGGER_RISING,
- "taal vsync", dssdev);
-
- if (r) {
- dev_err(&dssdev->dev, "IRQ request failed\n");
- gpio_free(gpio);
- goto err_irq;
- }
-
- INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
- taal_te_timeout_work_callback);
-
- dev_dbg(&dssdev->dev, "Using GPIO TE\n");
- }
-
r = omap_dsi_request_vc(dssdev, &td->channel);
if (r) {
dev_err(&dssdev->dev, "failed to get virtual channel\n");
@@ -993,29 +987,16 @@ static int taal_probe(struct omap_dss_device *dssdev)
err_vc_id:
omap_dsi_release_vc(dssdev, td->channel);
err_req_vc:
- if (panel_data->use_ext_te)
- free_irq(gpio_to_irq(panel_data->ext_te_gpio), dssdev);
-err_irq:
- if (panel_data->use_ext_te)
- gpio_free(panel_data->ext_te_gpio);
-err_gpio:
if (bldev != NULL)
backlight_device_unregister(bldev);
err_bl:
- if (gpio_is_valid(panel_data->reset_gpio))
- gpio_free(panel_data->reset_gpio);
-err_rst_gpio:
destroy_workqueue(td->workqueue);
-err_wq:
- kfree(td);
-err:
return r;
}
static void __exit taal_remove(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
struct backlight_device *bldev;
dev_dbg(&dssdev->dev, "remove\n");
@@ -1023,12 +1004,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
omap_dsi_release_vc(dssdev, td->channel);
- if (panel_data->use_ext_te) {
- int gpio = panel_data->ext_te_gpio;
- free_irq(gpio_to_irq(gpio), dssdev);
- gpio_free(gpio);
- }
-
bldev = td->bldev;
if (bldev != NULL) {
bldev->props.power = FB_BLANK_POWERDOWN;
@@ -1042,11 +1017,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
/* reset, to be sure that the panel is in a valid state */
taal_hw_reset(dssdev);
-
- if (gpio_is_valid(panel_data->reset_gpio))
- gpio_free(panel_data->reset_gpio);
-
- kfree(td);
}
static int taal_power_on(struct omap_dss_device *dssdev)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 01/17] OMAPDSS: Taal: use devm_* functions
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Use devm_ functions in panel-taal.c's probe when possible. Also reorder
the initialization sequence so that devm_ allocations are done before
things that require explicit freeing. This simplifies the probe and
remove functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays/panel-taal.c | 118 +++++++++++------------------
1 file changed, 44 insertions(+), 74 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 7b2d7bb..1255864 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -865,10 +865,8 @@ static int taal_probe(struct omap_dss_device *dssdev)
dev_dbg(&dssdev->dev, "probe\n");
- if (!panel_data || !panel_data->name) {
- r = -EINVAL;
- goto err;
- }
+ if (!panel_data || !panel_data->name)
+ return -EINVAL;
for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
if (strcmp(panel_data->name, panel_configs[i].name) == 0) {
@@ -877,21 +875,17 @@ static int taal_probe(struct omap_dss_device *dssdev)
}
}
- if (!panel_config) {
- r = -EINVAL;
- goto err;
- }
+ if (!panel_config)
+ return -EINVAL;
dssdev->panel.timings = panel_config->timings;
dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
- td = kzalloc(sizeof(*td), GFP_KERNEL);
- if (!td) {
- r = -ENOMEM;
- goto err;
- }
+ td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
+ if (!td)
+ return -ENOMEM;
td->dssdev = dssdev;
td->panel_config = panel_config;
td->esd_interval = panel_data->esd_interval;
@@ -902,26 +896,51 @@ static int taal_probe(struct omap_dss_device *dssdev)
atomic_set(&td->do_update, 0);
- td->workqueue = create_singlethread_workqueue("taal_esd");
- if (td->workqueue == NULL) {
- dev_err(&dssdev->dev, "can't create ESD workqueue\n");
- r = -ENOMEM;
- goto err_wq;
- }
- INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
- INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
-
dev_set_drvdata(&dssdev->dev, td);
if (gpio_is_valid(panel_data->reset_gpio)) {
- r = gpio_request_one(panel_data->reset_gpio, GPIOF_OUT_INIT_LOW,
- "taal rst");
+ r = devm_gpio_request_one(&dssdev->dev, panel_data->reset_gpio,
+ GPIOF_OUT_INIT_LOW, "taal rst");
if (r) {
dev_err(&dssdev->dev, "failed to request reset gpio\n");
- goto err_rst_gpio;
+ return r;
}
}
+ if (panel_data->use_ext_te) {
+ int gpio = panel_data->ext_te_gpio;
+
+ r = devm_gpio_request_one(&dssdev->dev, gpio, GPIOF_IN,
+ "taal irq");
+ if (r) {
+ dev_err(&dssdev->dev, "GPIO request failed\n");
+ return r;
+ }
+
+ r = devm_request_irq(&dssdev->dev, gpio_to_irq(gpio),
+ taal_te_isr,
+ IRQF_TRIGGER_RISING,
+ "taal vsync", dssdev);
+
+ if (r) {
+ dev_err(&dssdev->dev, "IRQ request failed\n");
+ return r;
+ }
+
+ INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
+ taal_te_timeout_work_callback);
+
+ dev_dbg(&dssdev->dev, "Using GPIO TE\n");
+ }
+
+ td->workqueue = create_singlethread_workqueue("taal_esd");
+ if (td->workqueue == NULL) {
+ dev_err(&dssdev->dev, "can't create ESD workqueue\n");
+ return -ENOMEM;
+ }
+ INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
+ INIT_DELAYED_WORK(&td->ulps_work, taal_ulps_work);
+
taal_hw_reset(dssdev);
if (panel_data->use_dsi_backlight) {
@@ -945,31 +964,6 @@ static int taal_probe(struct omap_dss_device *dssdev)
taal_bl_update_status(bldev);
}
- if (panel_data->use_ext_te) {
- int gpio = panel_data->ext_te_gpio;
-
- r = gpio_request_one(gpio, GPIOF_IN, "taal irq");
- if (r) {
- dev_err(&dssdev->dev, "GPIO request failed\n");
- goto err_gpio;
- }
-
- r = request_irq(gpio_to_irq(gpio), taal_te_isr,
- IRQF_TRIGGER_RISING,
- "taal vsync", dssdev);
-
- if (r) {
- dev_err(&dssdev->dev, "IRQ request failed\n");
- gpio_free(gpio);
- goto err_irq;
- }
-
- INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
- taal_te_timeout_work_callback);
-
- dev_dbg(&dssdev->dev, "Using GPIO TE\n");
- }
-
r = omap_dsi_request_vc(dssdev, &td->channel);
if (r) {
dev_err(&dssdev->dev, "failed to get virtual channel\n");
@@ -993,29 +987,16 @@ static int taal_probe(struct omap_dss_device *dssdev)
err_vc_id:
omap_dsi_release_vc(dssdev, td->channel);
err_req_vc:
- if (panel_data->use_ext_te)
- free_irq(gpio_to_irq(panel_data->ext_te_gpio), dssdev);
-err_irq:
- if (panel_data->use_ext_te)
- gpio_free(panel_data->ext_te_gpio);
-err_gpio:
if (bldev != NULL)
backlight_device_unregister(bldev);
err_bl:
- if (gpio_is_valid(panel_data->reset_gpio))
- gpio_free(panel_data->reset_gpio);
-err_rst_gpio:
destroy_workqueue(td->workqueue);
-err_wq:
- kfree(td);
-err:
return r;
}
static void __exit taal_remove(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
struct backlight_device *bldev;
dev_dbg(&dssdev->dev, "remove\n");
@@ -1023,12 +1004,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
omap_dsi_release_vc(dssdev, td->channel);
- if (panel_data->use_ext_te) {
- int gpio = panel_data->ext_te_gpio;
- free_irq(gpio_to_irq(gpio), dssdev);
- gpio_free(gpio);
- }
-
bldev = td->bldev;
if (bldev != NULL) {
bldev->props.power = FB_BLANK_POWERDOWN;
@@ -1042,11 +1017,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
/* reset, to be sure that the panel is in a valid state */
taal_hw_reset(dssdev);
-
- if (gpio_is_valid(panel_data->reset_gpio))
- gpio_free(panel_data->reset_gpio);
-
- kfree(td);
}
static int taal_power_on(struct omap_dss_device *dssdev)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 02/17] OMAPFB1: remove unnecessary includes
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Remove unnecessary includes from the old omapfb driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap/hwa742.c | 1 -
drivers/video/omap/lcd_ams_delta.c | 1 -
drivers/video/omap/lcd_palmte.c | 1 -
3 files changed, 3 deletions(-)
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 9f1d23c..f349ee6 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -27,7 +27,6 @@
#include <linux/clk.h>
#include <linux/interrupt.h>
-#include <plat/dma.h>
#include "omapfb.h"
#define HWA742_REV_CODE_REG 0x0
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index d3a3113..5cca6b3 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -28,7 +28,6 @@
#include <linux/gpio.h>
#include <plat/board-ams-delta.h>
-#include <mach/hardware.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
index 88c31eb..ff4fb62 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -23,7 +23,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <plat/fpga.h>
#include "omapfb.h"
static int palmte_panel_init(struct lcd_panel *panel,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 02/17] OMAPFB1: remove unnecessary includes
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Remove unnecessary includes from the old omapfb driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap/hwa742.c | 1 -
drivers/video/omap/lcd_ams_delta.c | 1 -
drivers/video/omap/lcd_palmte.c | 1 -
3 files changed, 3 deletions(-)
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 9f1d23c..f349ee6 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -27,7 +27,6 @@
#include <linux/clk.h>
#include <linux/interrupt.h>
-#include <plat/dma.h>
#include "omapfb.h"
#define HWA742_REV_CODE_REG 0x0
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index d3a3113..5cca6b3 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -28,7 +28,6 @@
#include <linux/gpio.h>
#include <plat/board-ams-delta.h>
-#include <mach/hardware.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
index 88c31eb..ff4fb62 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -23,7 +23,6 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <plat/fpga.h>
#include "omapfb.h"
static int palmte_panel_init(struct lcd_panel *panel,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 03/17] OMAPFB1: remove a non-used table
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
The old omapfb driver contains a table for DMA element types, which is
not used. Remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap/omapfb_main.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index f54b463..4351c43 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -131,15 +131,6 @@ static void omapfb_rqueue_unlock(struct omapfb_device *fbdev)
* LCD controller and LCD DMA
* ---------------------------------------------------------------------------
*/
-/* Lookup table to map elem size to elem type. */
-static const int dma_elem_type[] = {
- 0,
- OMAP_DMA_DATA_TYPE_S8,
- OMAP_DMA_DATA_TYPE_S16,
- 0,
- OMAP_DMA_DATA_TYPE_S32,
-};
-
/*
* Allocate resources needed for LCD controller and LCD DMA operations. Video
* memory is allocated from system memory according to the virtual display
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 03/17] OMAPFB1: remove a non-used table
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
The old omapfb driver contains a table for DMA element types, which is
not used. Remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap/omapfb_main.c | 9 ---------
1 file changed, 9 deletions(-)
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index f54b463..4351c43 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -131,15 +131,6 @@ static void omapfb_rqueue_unlock(struct omapfb_device *fbdev)
* LCD controller and LCD DMA
* ---------------------------------------------------------------------------
*/
-/* Lookup table to map elem size to elem type. */
-static const int dma_elem_type[] = {
- 0,
- OMAP_DMA_DATA_TYPE_S8,
- OMAP_DMA_DATA_TYPE_S16,
- 0,
- OMAP_DMA_DATA_TYPE_S32,
-};
-
/*
* Allocate resources needed for LCD controller and LCD DMA operations. Video
* memory is allocated from system memory according to the virtual display
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 04/17] OMAPDSS: remove unnecessary includes
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Remove unnecessary includes from omapdss.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 2 --
drivers/video/omap2/dss/dpi.c | 1 -
drivers/video/omap2/dss/dsi.c | 1 -
drivers/video/omap2/dss/dss.c | 1 -
drivers/video/omap2/dss/overlay.c | 1 -
drivers/video/omap2/dss/venc.c | 1 -
6 files changed, 7 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 0de9a7e..e934abb 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,8 +37,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <plat/clock.h>
-
#include <video/omapdss.h>
#include "dss.h"
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 25fb895..99b9851 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -31,7 +31,6 @@
#include <linux/regulator/consumer.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 254666f..8d815e3 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -41,7 +41,6 @@
#include <video/omapdss.h>
#include <video/mipi_display.h>
-#include <plat/clock.h>
#include "dss.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 31a553a..759dbee 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -36,7 +36,6 @@
#include <video/omapdss.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include "dss.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 952c6fa..94e74be 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -32,7 +32,6 @@
#include <linux/slab.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 4a6caf9..45252cf 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -36,7 +36,6 @@
#include <linux/pm_runtime.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 04/17] OMAPDSS: remove unnecessary includes
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Remove unnecessary includes from omapdss.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 2 --
drivers/video/omap2/dss/dpi.c | 1 -
drivers/video/omap2/dss/dsi.c | 1 -
drivers/video/omap2/dss/dss.c | 1 -
drivers/video/omap2/dss/overlay.c | 1 -
drivers/video/omap2/dss/venc.c | 1 -
6 files changed, 7 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 0de9a7e..e934abb 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -37,8 +37,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <plat/clock.h>
-
#include <video/omapdss.h>
#include "dss.h"
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index 25fb895..99b9851 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -31,7 +31,6 @@
#include <linux/regulator/consumer.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 254666f..8d815e3 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -41,7 +41,6 @@
#include <video/omapdss.h>
#include <video/mipi_display.h>
-#include <plat/clock.h>
#include "dss.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 31a553a..759dbee 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -36,7 +36,6 @@
#include <video/omapdss.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include "dss.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 952c6fa..94e74be 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -32,7 +32,6 @@
#include <linux/slab.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 4a6caf9..45252cf 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -36,7 +36,6 @@
#include <linux/pm_runtime.h>
#include <video/omapdss.h>
-#include <plat/cpu.h>
#include "dss.h"
#include "dss_features.h"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 05/17] OMAPFB: clear framebuffers with CPU
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Currently vram.c clears the allocated memory automatically using OMAP
system DMA. In an effort to reduce OMAP dependencies, we'll do the
memory clear with CPU from now on.
This patch implements clearing of the framebuffer in omapfb, using
cfb_fillrect() to do the actual clear.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/omapfb/omapfb-main.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index fc671d3..7afdfcf 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1592,6 +1592,20 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
return 0;
}
+static void omapfb_clear_fb(struct fb_info *fbi)
+{
+ const struct fb_fillrect rect = {
+ .dx = 0,
+ .dy = 0,
+ .width = fbi->var.xres_virtual,
+ .height = fbi->var.yres_virtual,
+ .color = 0,
+ .rop = ROP_COPY,
+ };
+
+ cfb_fillrect(fbi, &rect);
+}
+
int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
{
struct omapfb_info *ofbi = FB2OFB(fbi);
@@ -1661,6 +1675,8 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
goto err;
}
+ omapfb_clear_fb(fbi);
+
return 0;
err:
omapfb_free_fbmem(fbi);
@@ -1972,6 +1988,16 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
}
}
+ for (i = 0; i < fbdev->num_fbs; i++) {
+ struct fb_info *fbi = fbdev->fbs[i];
+ struct omapfb_info *ofbi = FB2OFB(fbi);
+
+ if (ofbi->region->size = 0)
+ continue;
+
+ omapfb_clear_fb(fbi);
+ }
+
/* Enable fb0 */
if (fbdev->num_fbs > 0) {
struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 05/17] OMAPFB: clear framebuffers with CPU
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Currently vram.c clears the allocated memory automatically using OMAP
system DMA. In an effort to reduce OMAP dependencies, we'll do the
memory clear with CPU from now on.
This patch implements clearing of the framebuffer in omapfb, using
cfb_fillrect() to do the actual clear.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/omapfb/omapfb-main.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index fc671d3..7afdfcf 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -1592,6 +1592,20 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
return 0;
}
+static void omapfb_clear_fb(struct fb_info *fbi)
+{
+ const struct fb_fillrect rect = {
+ .dx = 0,
+ .dy = 0,
+ .width = fbi->var.xres_virtual,
+ .height = fbi->var.yres_virtual,
+ .color = 0,
+ .rop = ROP_COPY,
+ };
+
+ cfb_fillrect(fbi, &rect);
+}
+
int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
{
struct omapfb_info *ofbi = FB2OFB(fbi);
@@ -1661,6 +1675,8 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
goto err;
}
+ omapfb_clear_fb(fbi);
+
return 0;
err:
omapfb_free_fbmem(fbi);
@@ -1972,6 +1988,16 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
}
}
+ for (i = 0; i < fbdev->num_fbs; i++) {
+ struct fb_info *fbi = fbdev->fbs[i];
+ struct omapfb_info *ofbi = FB2OFB(fbi);
+
+ if (ofbi->region->size == 0)
+ continue;
+
+ omapfb_clear_fb(fbi);
+ }
+
/* Enable fb0 */
if (fbdev->num_fbs > 0) {
struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 06/17] OMAPDSS: VRAM: Remove clearing with sDMA
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen, Russell King - ARM Linux
Currently vram.c clears the allocated memory automatically using OMAP
system DMA. In an effort to reduce OMAP dependencies, we'll do the
memory clear with CPU from now on.
The previous patch implemented memory clear in the omapfb driver, and
this patch removes the now obsolete clear functionality from vram.c.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
---
drivers/video/omap2/vram.c | 56 --------------------------------------------
1 file changed, 56 deletions(-)
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 87e421e..f2b15c4 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -34,7 +34,6 @@
#include <asm/setup.h>
#include <plat/vram.h>
-#include <plat/dma.h>
#ifdef DEBUG
#define DBG(format, ...) pr_debug("VRAM: " format, ## __VA_ARGS__)
@@ -250,59 +249,6 @@ int omap_vram_reserve(unsigned long paddr, size_t size)
}
EXPORT_SYMBOL(omap_vram_reserve);
-static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data)
-{
- struct completion *compl = data;
- complete(compl);
-}
-
-static int _omap_vram_clear(u32 paddr, unsigned pages)
-{
- struct completion compl;
- unsigned elem_count;
- unsigned frame_count;
- int r;
- int lch;
-
- init_completion(&compl);
-
- r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA",
- _omap_vram_dma_cb,
- &compl, &lch);
- if (r) {
- pr_err("VRAM: request_dma failed for memory clear\n");
- return -EBUSY;
- }
-
- elem_count = pages * PAGE_SIZE / 4;
- frame_count = 1;
-
- omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32,
- elem_count, frame_count,
- OMAP_DMA_SYNC_ELEMENT,
- 0, 0);
-
- omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC,
- paddr, 0, 0);
-
- omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000);
-
- omap_start_dma(lch);
-
- if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) = 0) {
- omap_stop_dma(lch);
- pr_err("VRAM: dma timeout while clearing memory\n");
- r = -EIO;
- goto err;
- }
-
- r = 0;
-err:
- omap_free_dma(lch);
-
- return r;
-}
-
static int _omap_vram_alloc(unsigned pages, unsigned long *paddr)
{
struct vram_region *rm;
@@ -337,8 +283,6 @@ found:
*paddr = start;
- _omap_vram_clear(start, pages);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 06/17] OMAPDSS: VRAM: Remove clearing with sDMA
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen, Russell King - ARM Linux
Currently vram.c clears the allocated memory automatically using OMAP
system DMA. In an effort to reduce OMAP dependencies, we'll do the
memory clear with CPU from now on.
The previous patch implemented memory clear in the omapfb driver, and
this patch removes the now obsolete clear functionality from vram.c.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
---
drivers/video/omap2/vram.c | 56 --------------------------------------------
1 file changed, 56 deletions(-)
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index 87e421e..f2b15c4 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -34,7 +34,6 @@
#include <asm/setup.h>
#include <plat/vram.h>
-#include <plat/dma.h>
#ifdef DEBUG
#define DBG(format, ...) pr_debug("VRAM: " format, ## __VA_ARGS__)
@@ -250,59 +249,6 @@ int omap_vram_reserve(unsigned long paddr, size_t size)
}
EXPORT_SYMBOL(omap_vram_reserve);
-static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data)
-{
- struct completion *compl = data;
- complete(compl);
-}
-
-static int _omap_vram_clear(u32 paddr, unsigned pages)
-{
- struct completion compl;
- unsigned elem_count;
- unsigned frame_count;
- int r;
- int lch;
-
- init_completion(&compl);
-
- r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA",
- _omap_vram_dma_cb,
- &compl, &lch);
- if (r) {
- pr_err("VRAM: request_dma failed for memory clear\n");
- return -EBUSY;
- }
-
- elem_count = pages * PAGE_SIZE / 4;
- frame_count = 1;
-
- omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32,
- elem_count, frame_count,
- OMAP_DMA_SYNC_ELEMENT,
- 0, 0);
-
- omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC,
- paddr, 0, 0);
-
- omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000);
-
- omap_start_dma(lch);
-
- if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) {
- omap_stop_dma(lch);
- pr_err("VRAM: dma timeout while clearing memory\n");
- r = -EIO;
- goto err;
- }
-
- r = 0;
-err:
- omap_free_dma(lch);
-
- return r;
-}
-
static int _omap_vram_alloc(unsigned pages, unsigned long *paddr)
{
struct vram_region *rm;
@@ -337,8 +283,6 @@ found:
*paddr = start;
- _omap_vram_clear(start, pages);
-
return 0;
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 07/17] OMAPDSS: Taal: Reogranize for device tree
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Reorganize taal driver to make it easier to integrate device tree code.
Instead of storing the panel's platform data, we'll "parse" the platform
data and store the required information in driver's own data. This way
adding device tree data parsing is simple.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays/panel-taal.c | 127 +++++++++++++++++------------
1 file changed, 74 insertions(+), 53 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 1255864..4cf9416 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -121,6 +121,18 @@ struct taal_data {
struct omap_dss_device *dssdev;
+ /* panel specific HW info */
+ struct panel_config *panel_config;
+
+ /* panel HW configuration from DT or platform data */
+ int reset_gpio;
+ int ext_te_gpio;
+
+ bool use_dsi_backlight;
+
+ struct omap_dsi_pin_config pin_config;
+
+ /* runtime variables */
bool enabled;
u8 rotate;
bool mirror;
@@ -145,16 +157,8 @@ struct taal_data {
bool ulps_enabled;
unsigned ulps_timeout;
struct delayed_work ulps_work;
-
- struct panel_config *panel_config;
};
-static inline struct nokia_dsi_panel_data
-*get_panel_data(const struct omap_dss_device *dssdev)
-{
- return (struct nokia_dsi_panel_data *) dssdev->data;
-}
-
static void taal_esd_work(struct work_struct *work);
static void taal_ulps_work(struct work_struct *work);
@@ -371,7 +375,6 @@ static void taal_cancel_ulps_work(struct omap_dss_device *dssdev)
static int taal_enter_ulps(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
if (td->ulps_enabled)
@@ -383,7 +386,8 @@ static int taal_enter_ulps(struct omap_dss_device *dssdev)
if (r)
goto err;
- disable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+ if (gpio_is_valid(td->ext_te_gpio))
+ disable_irq(gpio_to_irq(td->ext_te_gpio));
omapdss_dsi_display_disable(dssdev, false, true);
@@ -405,7 +409,6 @@ err:
static int taal_exit_ulps(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
if (!td->ulps_enabled)
@@ -425,7 +428,8 @@ static int taal_exit_ulps(struct omap_dss_device *dssdev)
goto err2;
}
- enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+ if (gpio_is_valid(td->ext_te_gpio))
+ enable_irq(gpio_to_irq(td->ext_te_gpio));
taal_queue_ulps_work(dssdev);
@@ -438,7 +442,8 @@ err2:
r = taal_panel_reset(dssdev);
if (!r) {
- enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+ if (gpio_is_valid(td->ext_te_gpio))
+ enable_irq(gpio_to_irq(td->ext_te_gpio));
td->ulps_enabled = false;
}
err1:
@@ -835,71 +840,93 @@ static struct attribute_group taal_attr_group = {
static void taal_hw_reset(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
- if (panel_data->reset_gpio = -1)
+ if (!gpio_is_valid(td->reset_gpio))
return;
- gpio_set_value(panel_data->reset_gpio, 1);
+ gpio_set_value(td->reset_gpio, 1);
if (td->panel_config->reset_sequence.high)
udelay(td->panel_config->reset_sequence.high);
/* reset the panel */
- gpio_set_value(panel_data->reset_gpio, 0);
+ gpio_set_value(td->reset_gpio, 0);
/* assert reset */
if (td->panel_config->reset_sequence.low)
udelay(td->panel_config->reset_sequence.low);
- gpio_set_value(panel_data->reset_gpio, 1);
+ gpio_set_value(td->reset_gpio, 1);
/* wait after releasing reset */
if (td->panel_config->sleep.hw_reset)
msleep(td->panel_config->sleep.hw_reset);
}
+static void taal_probe_pdata(struct taal_data *td,
+ const struct nokia_dsi_panel_data *pdata)
+{
+ td->reset_gpio = pdata->reset_gpio;
+
+ if (pdata->use_ext_te)
+ td->ext_te_gpio = pdata->ext_te_gpio;
+ else
+ td->ext_te_gpio = -1;
+
+ td->esd_interval = pdata->esd_interval;
+ td->ulps_timeout = pdata->ulps_timeout;
+
+ td->use_dsi_backlight = pdata->use_dsi_backlight;
+
+ td->pin_config = pdata->pin_config;
+}
+
static int taal_probe(struct omap_dss_device *dssdev)
{
struct backlight_properties props;
struct taal_data *td;
struct backlight_device *bldev = NULL;
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
- struct panel_config *panel_config = NULL;
int r, i;
+ const char *panel_name;
dev_dbg(&dssdev->dev, "probe\n");
- if (!panel_data || !panel_data->name)
+ td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
+ if (!td)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dssdev->dev, td);
+ td->dssdev = dssdev;
+
+ if (dssdev->data) {
+ const struct nokia_dsi_panel_data *pdata = dssdev->data;
+
+ taal_probe_pdata(td, pdata);
+
+ panel_name = pdata->name;
+ } else {
+ return -ENODEV;
+ }
+
+ if (panel_name = NULL)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
- if (strcmp(panel_data->name, panel_configs[i].name) = 0) {
- panel_config = &panel_configs[i];
+ if (strcmp(panel_name, panel_configs[i].name) = 0) {
+ td->panel_config = &panel_configs[i];
break;
}
}
- if (!panel_config)
+ if (!td->panel_config)
return -EINVAL;
- dssdev->panel.timings = panel_config->timings;
+ dssdev->panel.timings = td->panel_config->timings;
dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
- td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
- if (!td)
- return -ENOMEM;
- td->dssdev = dssdev;
- td->panel_config = panel_config;
- td->esd_interval = panel_data->esd_interval;
- td->ulps_enabled = false;
- td->ulps_timeout = panel_data->ulps_timeout;
-
mutex_init(&td->lock);
atomic_set(&td->do_update, 0);
- dev_set_drvdata(&dssdev->dev, td);
-
- if (gpio_is_valid(panel_data->reset_gpio)) {
- r = devm_gpio_request_one(&dssdev->dev, panel_data->reset_gpio,
+ if (gpio_is_valid(td->reset_gpio)) {
+ r = devm_gpio_request_one(&dssdev->dev, td->reset_gpio,
GPIOF_OUT_INIT_LOW, "taal rst");
if (r) {
dev_err(&dssdev->dev, "failed to request reset gpio\n");
@@ -907,17 +934,15 @@ static int taal_probe(struct omap_dss_device *dssdev)
}
}
- if (panel_data->use_ext_te) {
- int gpio = panel_data->ext_te_gpio;
-
- r = devm_gpio_request_one(&dssdev->dev, gpio, GPIOF_IN,
- "taal irq");
+ if (gpio_is_valid(td->ext_te_gpio)) {
+ r = devm_gpio_request_one(&dssdev->dev, td->ext_te_gpio,
+ GPIOF_IN, "taal irq");
if (r) {
dev_err(&dssdev->dev, "GPIO request failed\n");
return r;
}
- r = devm_request_irq(&dssdev->dev, gpio_to_irq(gpio),
+ r = devm_request_irq(&dssdev->dev, gpio_to_irq(td->ext_te_gpio),
taal_te_isr,
IRQF_TRIGGER_RISING,
"taal vsync", dssdev);
@@ -943,7 +968,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
taal_hw_reset(dssdev);
- if (panel_data->use_dsi_backlight) {
+ if (td->use_dsi_backlight) {
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 255;
@@ -1022,11 +1047,10 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
static int taal_power_on(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
u8 id1, id2, id3;
int r;
- r = omapdss_dsi_configure_pins(dssdev, &panel_data->pin_config);
+ r = omapdss_dsi_configure_pins(dssdev, &td->pin_config);
if (r) {
dev_err(&dssdev->dev, "failed to configure DSI pins\n");
goto err0;
@@ -1339,7 +1363,6 @@ static int taal_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
@@ -1363,7 +1386,7 @@ static int taal_update(struct omap_dss_device *dssdev,
if (r)
goto err;
- if (td->te_enabled && panel_data->use_ext_te) {
+ if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
schedule_delayed_work(&td->te_timeout_work,
msecs_to_jiffies(250));
atomic_set(&td->do_update, 1);
@@ -1402,7 +1425,6 @@ static int taal_sync(struct omap_dss_device *dssdev)
static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
if (enable)
@@ -1410,7 +1432,7 @@ static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
else
r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
- if (!panel_data->use_ext_te)
+ if (!gpio_is_valid(td->ext_te_gpio))
omapdss_dsi_enable_te(dssdev, enable);
if (td->panel_config->sleep.enable_te)
@@ -1720,7 +1742,6 @@ static void taal_esd_work(struct work_struct *work)
struct taal_data *td = container_of(work, struct taal_data,
esd_work.work);
struct omap_dss_device *dssdev = td->dssdev;
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
u8 state1, state2;
int r;
@@ -1767,7 +1788,7 @@ static void taal_esd_work(struct work_struct *work)
}
/* Self-diagnostics result is also shown on TE GPIO line. We need
* to re-enable TE after self diagnostics */
- if (td->te_enabled && panel_data->use_ext_te) {
+ if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
if (r)
goto err;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 07/17] OMAPDSS: Taal: Reogranize for device tree
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Reorganize taal driver to make it easier to integrate device tree code.
Instead of storing the panel's platform data, we'll "parse" the platform
data and store the required information in driver's own data. This way
adding device tree data parsing is simple.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays/panel-taal.c | 127 +++++++++++++++++------------
1 file changed, 74 insertions(+), 53 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 1255864..4cf9416 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -121,6 +121,18 @@ struct taal_data {
struct omap_dss_device *dssdev;
+ /* panel specific HW info */
+ struct panel_config *panel_config;
+
+ /* panel HW configuration from DT or platform data */
+ int reset_gpio;
+ int ext_te_gpio;
+
+ bool use_dsi_backlight;
+
+ struct omap_dsi_pin_config pin_config;
+
+ /* runtime variables */
bool enabled;
u8 rotate;
bool mirror;
@@ -145,16 +157,8 @@ struct taal_data {
bool ulps_enabled;
unsigned ulps_timeout;
struct delayed_work ulps_work;
-
- struct panel_config *panel_config;
};
-static inline struct nokia_dsi_panel_data
-*get_panel_data(const struct omap_dss_device *dssdev)
-{
- return (struct nokia_dsi_panel_data *) dssdev->data;
-}
-
static void taal_esd_work(struct work_struct *work);
static void taal_ulps_work(struct work_struct *work);
@@ -371,7 +375,6 @@ static void taal_cancel_ulps_work(struct omap_dss_device *dssdev)
static int taal_enter_ulps(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
if (td->ulps_enabled)
@@ -383,7 +386,8 @@ static int taal_enter_ulps(struct omap_dss_device *dssdev)
if (r)
goto err;
- disable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+ if (gpio_is_valid(td->ext_te_gpio))
+ disable_irq(gpio_to_irq(td->ext_te_gpio));
omapdss_dsi_display_disable(dssdev, false, true);
@@ -405,7 +409,6 @@ err:
static int taal_exit_ulps(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
if (!td->ulps_enabled)
@@ -425,7 +428,8 @@ static int taal_exit_ulps(struct omap_dss_device *dssdev)
goto err2;
}
- enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+ if (gpio_is_valid(td->ext_te_gpio))
+ enable_irq(gpio_to_irq(td->ext_te_gpio));
taal_queue_ulps_work(dssdev);
@@ -438,7 +442,8 @@ err2:
r = taal_panel_reset(dssdev);
if (!r) {
- enable_irq(gpio_to_irq(panel_data->ext_te_gpio));
+ if (gpio_is_valid(td->ext_te_gpio))
+ enable_irq(gpio_to_irq(td->ext_te_gpio));
td->ulps_enabled = false;
}
err1:
@@ -835,71 +840,93 @@ static struct attribute_group taal_attr_group = {
static void taal_hw_reset(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
- if (panel_data->reset_gpio == -1)
+ if (!gpio_is_valid(td->reset_gpio))
return;
- gpio_set_value(panel_data->reset_gpio, 1);
+ gpio_set_value(td->reset_gpio, 1);
if (td->panel_config->reset_sequence.high)
udelay(td->panel_config->reset_sequence.high);
/* reset the panel */
- gpio_set_value(panel_data->reset_gpio, 0);
+ gpio_set_value(td->reset_gpio, 0);
/* assert reset */
if (td->panel_config->reset_sequence.low)
udelay(td->panel_config->reset_sequence.low);
- gpio_set_value(panel_data->reset_gpio, 1);
+ gpio_set_value(td->reset_gpio, 1);
/* wait after releasing reset */
if (td->panel_config->sleep.hw_reset)
msleep(td->panel_config->sleep.hw_reset);
}
+static void taal_probe_pdata(struct taal_data *td,
+ const struct nokia_dsi_panel_data *pdata)
+{
+ td->reset_gpio = pdata->reset_gpio;
+
+ if (pdata->use_ext_te)
+ td->ext_te_gpio = pdata->ext_te_gpio;
+ else
+ td->ext_te_gpio = -1;
+
+ td->esd_interval = pdata->esd_interval;
+ td->ulps_timeout = pdata->ulps_timeout;
+
+ td->use_dsi_backlight = pdata->use_dsi_backlight;
+
+ td->pin_config = pdata->pin_config;
+}
+
static int taal_probe(struct omap_dss_device *dssdev)
{
struct backlight_properties props;
struct taal_data *td;
struct backlight_device *bldev = NULL;
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
- struct panel_config *panel_config = NULL;
int r, i;
+ const char *panel_name;
dev_dbg(&dssdev->dev, "probe\n");
- if (!panel_data || !panel_data->name)
+ td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
+ if (!td)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dssdev->dev, td);
+ td->dssdev = dssdev;
+
+ if (dssdev->data) {
+ const struct nokia_dsi_panel_data *pdata = dssdev->data;
+
+ taal_probe_pdata(td, pdata);
+
+ panel_name = pdata->name;
+ } else {
+ return -ENODEV;
+ }
+
+ if (panel_name == NULL)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
- if (strcmp(panel_data->name, panel_configs[i].name) == 0) {
- panel_config = &panel_configs[i];
+ if (strcmp(panel_name, panel_configs[i].name) == 0) {
+ td->panel_config = &panel_configs[i];
break;
}
}
- if (!panel_config)
+ if (!td->panel_config)
return -EINVAL;
- dssdev->panel.timings = panel_config->timings;
+ dssdev->panel.timings = td->panel_config->timings;
dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
- td = devm_kzalloc(&dssdev->dev, sizeof(*td), GFP_KERNEL);
- if (!td)
- return -ENOMEM;
- td->dssdev = dssdev;
- td->panel_config = panel_config;
- td->esd_interval = panel_data->esd_interval;
- td->ulps_enabled = false;
- td->ulps_timeout = panel_data->ulps_timeout;
-
mutex_init(&td->lock);
atomic_set(&td->do_update, 0);
- dev_set_drvdata(&dssdev->dev, td);
-
- if (gpio_is_valid(panel_data->reset_gpio)) {
- r = devm_gpio_request_one(&dssdev->dev, panel_data->reset_gpio,
+ if (gpio_is_valid(td->reset_gpio)) {
+ r = devm_gpio_request_one(&dssdev->dev, td->reset_gpio,
GPIOF_OUT_INIT_LOW, "taal rst");
if (r) {
dev_err(&dssdev->dev, "failed to request reset gpio\n");
@@ -907,17 +934,15 @@ static int taal_probe(struct omap_dss_device *dssdev)
}
}
- if (panel_data->use_ext_te) {
- int gpio = panel_data->ext_te_gpio;
-
- r = devm_gpio_request_one(&dssdev->dev, gpio, GPIOF_IN,
- "taal irq");
+ if (gpio_is_valid(td->ext_te_gpio)) {
+ r = devm_gpio_request_one(&dssdev->dev, td->ext_te_gpio,
+ GPIOF_IN, "taal irq");
if (r) {
dev_err(&dssdev->dev, "GPIO request failed\n");
return r;
}
- r = devm_request_irq(&dssdev->dev, gpio_to_irq(gpio),
+ r = devm_request_irq(&dssdev->dev, gpio_to_irq(td->ext_te_gpio),
taal_te_isr,
IRQF_TRIGGER_RISING,
"taal vsync", dssdev);
@@ -943,7 +968,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
taal_hw_reset(dssdev);
- if (panel_data->use_dsi_backlight) {
+ if (td->use_dsi_backlight) {
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 255;
@@ -1022,11 +1047,10 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
static int taal_power_on(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
u8 id1, id2, id3;
int r;
- r = omapdss_dsi_configure_pins(dssdev, &panel_data->pin_config);
+ r = omapdss_dsi_configure_pins(dssdev, &td->pin_config);
if (r) {
dev_err(&dssdev->dev, "failed to configure DSI pins\n");
goto err0;
@@ -1339,7 +1363,6 @@ static int taal_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
@@ -1363,7 +1386,7 @@ static int taal_update(struct omap_dss_device *dssdev,
if (r)
goto err;
- if (td->te_enabled && panel_data->use_ext_te) {
+ if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
schedule_delayed_work(&td->te_timeout_work,
msecs_to_jiffies(250));
atomic_set(&td->do_update, 1);
@@ -1402,7 +1425,6 @@ static int taal_sync(struct omap_dss_device *dssdev)
static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
if (enable)
@@ -1410,7 +1432,7 @@ static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
else
r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
- if (!panel_data->use_ext_te)
+ if (!gpio_is_valid(td->ext_te_gpio))
omapdss_dsi_enable_te(dssdev, enable);
if (td->panel_config->sleep.enable_te)
@@ -1720,7 +1742,6 @@ static void taal_esd_work(struct work_struct *work)
struct taal_data *td = container_of(work, struct taal_data,
esd_work.work);
struct omap_dss_device *dssdev = td->dssdev;
- struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
u8 state1, state2;
int r;
@@ -1767,7 +1788,7 @@ static void taal_esd_work(struct work_struct *work)
}
/* Self-diagnostics result is also shown on TE GPIO line. We need
* to re-enable TE after self diagnostics */
- if (td->te_enabled && panel_data->use_ext_te) {
+ if (td->te_enabled && gpio_is_valid(td->ext_te_gpio)) {
r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
if (r)
goto err;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 08/17] OMAPDSS: TFP410: use devm_gpio_request_one
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Use devm_ version instead of the regular gpio_request_one to simplify
the error handling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays/panel-tfp410.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index 4be9a59..383811c 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -119,8 +119,8 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
}
if (gpio_is_valid(ddata->pd_gpio)) {
- r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
- "tfp410 pd");
+ r = devm_gpio_request_one(&dssdev->dev, ddata->pd_gpio,
+ GPIOF_OUT_INIT_LOW, "tfp410 pd");
if (r) {
dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
ddata->pd_gpio);
@@ -135,8 +135,7 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
if (!adapter) {
dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
i2c_bus_num);
- r = -EINVAL;
- goto err_i2c;
+ return -EINVAL;
}
ddata->i2c_adapter = adapter;
@@ -145,10 +144,6 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
dev_set_drvdata(&dssdev->dev, ddata);
return 0;
-err_i2c:
- if (gpio_is_valid(ddata->pd_gpio))
- gpio_free(ddata->pd_gpio);
- return r;
}
static void __exit tfp410_remove(struct omap_dss_device *dssdev)
@@ -160,9 +155,6 @@ static void __exit tfp410_remove(struct omap_dss_device *dssdev)
if (ddata->i2c_adapter)
i2c_put_adapter(ddata->i2c_adapter);
- if (gpio_is_valid(ddata->pd_gpio))
- gpio_free(ddata->pd_gpio);
-
dev_set_drvdata(&dssdev->dev, NULL);
mutex_unlock(&ddata->lock);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 08/17] OMAPDSS: TFP410: use devm_gpio_request_one
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Use devm_ version instead of the regular gpio_request_one to simplify
the error handling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/displays/panel-tfp410.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index 4be9a59..383811c 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -119,8 +119,8 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
}
if (gpio_is_valid(ddata->pd_gpio)) {
- r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
- "tfp410 pd");
+ r = devm_gpio_request_one(&dssdev->dev, ddata->pd_gpio,
+ GPIOF_OUT_INIT_LOW, "tfp410 pd");
if (r) {
dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
ddata->pd_gpio);
@@ -135,8 +135,7 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
if (!adapter) {
dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
i2c_bus_num);
- r = -EINVAL;
- goto err_i2c;
+ return -EINVAL;
}
ddata->i2c_adapter = adapter;
@@ -145,10 +144,6 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
dev_set_drvdata(&dssdev->dev, ddata);
return 0;
-err_i2c:
- if (gpio_is_valid(ddata->pd_gpio))
- gpio_free(ddata->pd_gpio);
- return r;
}
static void __exit tfp410_remove(struct omap_dss_device *dssdev)
@@ -160,9 +155,6 @@ static void __exit tfp410_remove(struct omap_dss_device *dssdev)
if (ddata->i2c_adapter)
i2c_put_adapter(ddata->i2c_adapter);
- if (gpio_is_valid(ddata->pd_gpio))
- gpio_free(ddata->pd_gpio);
-
dev_set_drvdata(&dssdev->dev, NULL);
mutex_unlock(&ddata->lock);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 09/17] OMAPDSS: split overlay sysfs code
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Separate sysfs code for overlays to a separate file. This is a bit
cleaner, and will allow us later to easily switch off the sysfs support
via Kconfig option.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/dss.h | 3 +
drivers/video/omap2/dss/overlay-sysfs.c | 456 +++++++++++++++++++++++++++++++
drivers/video/omap2/dss/overlay.c | 420 +---------------------------
4 files changed, 462 insertions(+), 419 deletions(-)
create mode 100644 drivers/video/omap2/dss/overlay-sysfs.c
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 30a48fb..927d5ce 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,6 +1,6 @@
obj-$(CONFIG_OMAP2_DSS) += omapdss.o
omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
- manager.o overlay.o apply.o
+ manager.o overlay.o overlay-sysfs.o apply.o
omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index d6cca82..11b053e 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -265,6 +265,9 @@ int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
const struct omap_video_timings *mgr_timings);
bool dss_ovl_use_replication(struct dss_lcd_mgr_config config,
enum omap_color_mode mode);
+int dss_overlay_kobj_init(struct omap_overlay *ovl,
+ struct platform_device *pdev);
+void dss_overlay_kobj_uninit(struct omap_overlay *ovl);
/* DSS */
int dss_init_platform_driver(void) __init;
diff --git a/drivers/video/omap2/dss/overlay-sysfs.c b/drivers/video/omap2/dss/overlay-sysfs.c
new file mode 100644
index 0000000..4cc5dde
--- /dev/null
+++ b/drivers/video/omap2/dss/overlay-sysfs.c
@@ -0,0 +1,456 @@
+/*
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "OVERLAY"
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
+}
+
+static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ovl->manager ? ovl->manager->name : "<none>");
+}
+
+static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
+ size_t size)
+{
+ int i, r;
+ struct omap_overlay_manager *mgr = NULL;
+ struct omap_overlay_manager *old_mgr;
+ int len = size;
+
+ if (buf[size-1] = '\n')
+ --len;
+
+ if (len > 0) {
+ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+ mgr = omap_dss_get_overlay_manager(i);
+
+ if (sysfs_streq(buf, mgr->name))
+ break;
+
+ mgr = NULL;
+ }
+ }
+
+ if (len > 0 && mgr = NULL)
+ return -EINVAL;
+
+ if (mgr)
+ DSSDBG("manager %s found\n", mgr->name);
+
+ if (mgr = ovl->manager)
+ return size;
+
+ old_mgr = ovl->manager;
+
+ r = dispc_runtime_get();
+ if (r)
+ return r;
+
+ /* detach old manager */
+ if (old_mgr) {
+ r = ovl->unset_manager(ovl);
+ if (r) {
+ DSSERR("detach failed\n");
+ goto err;
+ }
+
+ r = old_mgr->apply(old_mgr);
+ if (r)
+ goto err;
+ }
+
+ if (mgr) {
+ r = ovl->set_manager(ovl, mgr);
+ if (r) {
+ DSSERR("Failed to attach overlay\n");
+ goto err;
+ }
+
+ r = mgr->apply(mgr);
+ if (r)
+ goto err;
+ }
+
+ dispc_runtime_put();
+
+ return size;
+
+err:
+ dispc_runtime_put();
+ return r;
+}
+
+static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+ info.width, info.height);
+}
+
+static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.screen_width);
+}
+
+static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+ info.pos_x, info.pos_y);
+}
+
+static ssize_t overlay_position_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ char *last;
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.pos_x = simple_strtoul(buf, &last, 10);
+ ++last;
+ if (last - buf >= size)
+ return -EINVAL;
+
+ info.pos_y = simple_strtoul(last, &last, 10);
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+ info.out_width, info.out_height);
+}
+
+static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ char *last;
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.out_width = simple_strtoul(buf, &last, 10);
+ ++last;
+ if (last - buf >= size)
+ return -EINVAL;
+
+ info.out_height = simple_strtoul(last, &last, 10);
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->is_enabled(ovl));
+}
+
+static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
+ size_t size)
+{
+ int r;
+ bool enable;
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
+
+ if (enable)
+ r = ovl->enable(ovl);
+ else
+ r = ovl->disable(ovl);
+
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ info.global_alpha);
+}
+
+static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ u8 alpha;
+ struct omap_overlay_info info;
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) = 0)
+ return -ENODEV;
+
+ r = kstrtou8(buf, 0, &alpha);
+ if (r)
+ return r;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.global_alpha = alpha;
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_pre_mult_alpha_show(struct omap_overlay *ovl,
+ char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ info.pre_mult_alpha);
+}
+
+static ssize_t overlay_pre_mult_alpha_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ u8 alpha;
+ struct omap_overlay_info info;
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) = 0)
+ return -ENODEV;
+
+ r = kstrtou8(buf, 0, &alpha);
+ if (r)
+ return r;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.pre_mult_alpha = alpha;
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_zorder_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.zorder);
+}
+
+static ssize_t overlay_zorder_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ u8 zorder;
+ struct omap_overlay_info info;
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) = 0)
+ return -ENODEV;
+
+ r = kstrtou8(buf, 0, &zorder);
+ if (r)
+ return r;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.zorder = zorder;
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+struct overlay_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct omap_overlay *, char *);
+ ssize_t (*store)(struct omap_overlay *, const char *, size_t);
+};
+
+#define OVERLAY_ATTR(_name, _mode, _show, _store) \
+ struct overlay_attribute overlay_attr_##_name = \
+ __ATTR(_name, _mode, _show, _store)
+
+static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
+static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
+ overlay_manager_show, overlay_manager_store);
+static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
+static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
+static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
+ overlay_position_show, overlay_position_store);
+static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
+ overlay_output_size_show, overlay_output_size_store);
+static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
+ overlay_enabled_show, overlay_enabled_store);
+static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
+ overlay_global_alpha_show, overlay_global_alpha_store);
+static OVERLAY_ATTR(pre_mult_alpha, S_IRUGO|S_IWUSR,
+ overlay_pre_mult_alpha_show,
+ overlay_pre_mult_alpha_store);
+static OVERLAY_ATTR(zorder, S_IRUGO|S_IWUSR,
+ overlay_zorder_show, overlay_zorder_store);
+
+static struct attribute *overlay_sysfs_attrs[] = {
+ &overlay_attr_name.attr,
+ &overlay_attr_manager.attr,
+ &overlay_attr_input_size.attr,
+ &overlay_attr_screen_width.attr,
+ &overlay_attr_position.attr,
+ &overlay_attr_output_size.attr,
+ &overlay_attr_enabled.attr,
+ &overlay_attr_global_alpha.attr,
+ &overlay_attr_pre_mult_alpha.attr,
+ &overlay_attr_zorder.attr,
+ NULL
+};
+
+static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct omap_overlay *overlay;
+ struct overlay_attribute *overlay_attr;
+
+ overlay = container_of(kobj, struct omap_overlay, kobj);
+ overlay_attr = container_of(attr, struct overlay_attribute, attr);
+
+ if (!overlay_attr->show)
+ return -ENOENT;
+
+ return overlay_attr->show(overlay, buf);
+}
+
+static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay *overlay;
+ struct overlay_attribute *overlay_attr;
+
+ overlay = container_of(kobj, struct omap_overlay, kobj);
+ overlay_attr = container_of(attr, struct overlay_attribute, attr);
+
+ if (!overlay_attr->store)
+ return -ENOENT;
+
+ return overlay_attr->store(overlay, buf, size);
+}
+
+static const struct sysfs_ops overlay_sysfs_ops = {
+ .show = overlay_attr_show,
+ .store = overlay_attr_store,
+};
+
+static struct kobj_type overlay_ktype = {
+ .sysfs_ops = &overlay_sysfs_ops,
+ .default_attrs = overlay_sysfs_attrs,
+};
+
+int dss_overlay_kobj_init(struct omap_overlay *ovl,
+ struct platform_device *pdev)
+{
+ return kobject_init_and_add(&ovl->kobj, &overlay_ktype,
+ &pdev->dev.kobj, "overlay%d", ovl->id);
+}
+
+void dss_overlay_kobj_uninit(struct omap_overlay *ovl)
+{
+ kobject_del(&ovl->kobj);
+ kobject_put(&ovl->kobj);
+}
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 94e74be..e3d4068 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/sysfs.h>
-#include <linux/kobject.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/slab.h>
@@ -39,417 +38,6 @@
static int num_overlays;
static struct omap_overlay *overlays;
-static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
-}
-
-static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n",
- ovl->manager ? ovl->manager->name : "<none>");
-}
-
-static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
- size_t size)
-{
- int i, r;
- struct omap_overlay_manager *mgr = NULL;
- struct omap_overlay_manager *old_mgr;
- int len = size;
-
- if (buf[size-1] = '\n')
- --len;
-
- if (len > 0) {
- for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
- mgr = omap_dss_get_overlay_manager(i);
-
- if (sysfs_streq(buf, mgr->name))
- break;
-
- mgr = NULL;
- }
- }
-
- if (len > 0 && mgr = NULL)
- return -EINVAL;
-
- if (mgr)
- DSSDBG("manager %s found\n", mgr->name);
-
- if (mgr = ovl->manager)
- return size;
-
- old_mgr = ovl->manager;
-
- r = dispc_runtime_get();
- if (r)
- return r;
-
- /* detach old manager */
- if (old_mgr) {
- r = ovl->unset_manager(ovl);
- if (r) {
- DSSERR("detach failed\n");
- goto err;
- }
-
- r = old_mgr->apply(old_mgr);
- if (r)
- goto err;
- }
-
- if (mgr) {
- r = ovl->set_manager(ovl, mgr);
- if (r) {
- DSSERR("Failed to attach overlay\n");
- goto err;
- }
-
- r = mgr->apply(mgr);
- if (r)
- goto err;
- }
-
- dispc_runtime_put();
-
- return size;
-
-err:
- dispc_runtime_put();
- return r;
-}
-
-static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d,%d\n",
- info.width, info.height);
-}
-
-static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", info.screen_width);
-}
-
-static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d,%d\n",
- info.pos_x, info.pos_y);
-}
-
-static ssize_t overlay_position_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- char *last;
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.pos_x = simple_strtoul(buf, &last, 10);
- ++last;
- if (last - buf >= size)
- return -EINVAL;
-
- info.pos_y = simple_strtoul(last, &last, 10);
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d,%d\n",
- info.out_width, info.out_height);
-}
-
-static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- char *last;
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.out_width = simple_strtoul(buf, &last, 10);
- ++last;
- if (last - buf >= size)
- return -EINVAL;
-
- info.out_height = simple_strtoul(last, &last, 10);
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%d\n", ovl->is_enabled(ovl));
-}
-
-static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
- size_t size)
-{
- int r;
- bool enable;
-
- r = strtobool(buf, &enable);
- if (r)
- return r;
-
- if (enable)
- r = ovl->enable(ovl);
- else
- r = ovl->disable(ovl);
-
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n",
- info.global_alpha);
-}
-
-static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- u8 alpha;
- struct omap_overlay_info info;
-
- if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) = 0)
- return -ENODEV;
-
- r = kstrtou8(buf, 0, &alpha);
- if (r)
- return r;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.global_alpha = alpha;
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-static ssize_t overlay_pre_mult_alpha_show(struct omap_overlay *ovl,
- char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n",
- info.pre_mult_alpha);
-}
-
-static ssize_t overlay_pre_mult_alpha_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- u8 alpha;
- struct omap_overlay_info info;
-
- if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) = 0)
- return -ENODEV;
-
- r = kstrtou8(buf, 0, &alpha);
- if (r)
- return r;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.pre_mult_alpha = alpha;
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-static ssize_t overlay_zorder_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", info.zorder);
-}
-
-static ssize_t overlay_zorder_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- u8 zorder;
- struct omap_overlay_info info;
-
- if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) = 0)
- return -ENODEV;
-
- r = kstrtou8(buf, 0, &zorder);
- if (r)
- return r;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.zorder = zorder;
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-struct overlay_attribute {
- struct attribute attr;
- ssize_t (*show)(struct omap_overlay *, char *);
- ssize_t (*store)(struct omap_overlay *, const char *, size_t);
-};
-
-#define OVERLAY_ATTR(_name, _mode, _show, _store) \
- struct overlay_attribute overlay_attr_##_name = \
- __ATTR(_name, _mode, _show, _store)
-
-static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
-static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
- overlay_manager_show, overlay_manager_store);
-static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
-static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
-static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
- overlay_position_show, overlay_position_store);
-static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
- overlay_output_size_show, overlay_output_size_store);
-static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
- overlay_enabled_show, overlay_enabled_store);
-static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
- overlay_global_alpha_show, overlay_global_alpha_store);
-static OVERLAY_ATTR(pre_mult_alpha, S_IRUGO|S_IWUSR,
- overlay_pre_mult_alpha_show,
- overlay_pre_mult_alpha_store);
-static OVERLAY_ATTR(zorder, S_IRUGO|S_IWUSR,
- overlay_zorder_show, overlay_zorder_store);
-
-static struct attribute *overlay_sysfs_attrs[] = {
- &overlay_attr_name.attr,
- &overlay_attr_manager.attr,
- &overlay_attr_input_size.attr,
- &overlay_attr_screen_width.attr,
- &overlay_attr_position.attr,
- &overlay_attr_output_size.attr,
- &overlay_attr_enabled.attr,
- &overlay_attr_global_alpha.attr,
- &overlay_attr_pre_mult_alpha.attr,
- &overlay_attr_zorder.attr,
- NULL
-};
-
-static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct omap_overlay *overlay;
- struct overlay_attribute *overlay_attr;
-
- overlay = container_of(kobj, struct omap_overlay, kobj);
- overlay_attr = container_of(attr, struct overlay_attribute, attr);
-
- if (!overlay_attr->show)
- return -ENOENT;
-
- return overlay_attr->show(overlay, buf);
-}
-
-static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t size)
-{
- struct omap_overlay *overlay;
- struct overlay_attribute *overlay_attr;
-
- overlay = container_of(kobj, struct omap_overlay, kobj);
- overlay_attr = container_of(attr, struct overlay_attribute, attr);
-
- if (!overlay_attr->store)
- return -ENOENT;
-
- return overlay_attr->store(overlay, buf, size);
-}
-
-static const struct sysfs_ops overlay_sysfs_ops = {
- .show = overlay_attr_show,
- .store = overlay_attr_store,
-};
-
-static struct kobj_type overlay_ktype = {
- .sysfs_ops = &overlay_sysfs_ops,
- .default_attrs = overlay_sysfs_attrs,
-};
-
int omap_dss_get_num_overlays(void)
{
return num_overlays;
@@ -511,9 +99,7 @@ void dss_init_overlays(struct platform_device *pdev)
ovl->supported_modes dss_feat_get_supported_color_modes(ovl->id);
- r = kobject_init_and_add(&ovl->kobj, &overlay_ktype,
- &pdev->dev.kobj, "overlay%d", i);
-
+ r = dss_overlay_kobj_init(ovl, pdev);
if (r)
DSSERR("failed to create sysfs file\n");
}
@@ -594,9 +180,7 @@ void dss_uninit_overlays(struct platform_device *pdev)
for (i = 0; i < num_overlays; ++i) {
struct omap_overlay *ovl = &overlays[i];
-
- kobject_del(&ovl->kobj);
- kobject_put(&ovl->kobj);
+ dss_overlay_kobj_uninit(ovl);
}
kfree(overlays);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 09/17] OMAPDSS: split overlay sysfs code
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Separate sysfs code for overlays to a separate file. This is a bit
cleaner, and will allow us later to easily switch off the sysfs support
via Kconfig option.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/dss.h | 3 +
drivers/video/omap2/dss/overlay-sysfs.c | 456 +++++++++++++++++++++++++++++++
drivers/video/omap2/dss/overlay.c | 420 +---------------------------
4 files changed, 462 insertions(+), 419 deletions(-)
create mode 100644 drivers/video/omap2/dss/overlay-sysfs.c
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 30a48fb..927d5ce 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,6 +1,6 @@
obj-$(CONFIG_OMAP2_DSS) += omapdss.o
omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
- manager.o overlay.o apply.o
+ manager.o overlay.o overlay-sysfs.o apply.o
omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index d6cca82..11b053e 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -265,6 +265,9 @@ int dss_ovl_check(struct omap_overlay *ovl, struct omap_overlay_info *info,
const struct omap_video_timings *mgr_timings);
bool dss_ovl_use_replication(struct dss_lcd_mgr_config config,
enum omap_color_mode mode);
+int dss_overlay_kobj_init(struct omap_overlay *ovl,
+ struct platform_device *pdev);
+void dss_overlay_kobj_uninit(struct omap_overlay *ovl);
/* DSS */
int dss_init_platform_driver(void) __init;
diff --git a/drivers/video/omap2/dss/overlay-sysfs.c b/drivers/video/omap2/dss/overlay-sysfs.c
new file mode 100644
index 0000000..4cc5dde
--- /dev/null
+++ b/drivers/video/omap2/dss/overlay-sysfs.c
@@ -0,0 +1,456 @@
+/*
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "OVERLAY"
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/platform_device.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
+}
+
+static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ovl->manager ? ovl->manager->name : "<none>");
+}
+
+static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
+ size_t size)
+{
+ int i, r;
+ struct omap_overlay_manager *mgr = NULL;
+ struct omap_overlay_manager *old_mgr;
+ int len = size;
+
+ if (buf[size-1] == '\n')
+ --len;
+
+ if (len > 0) {
+ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+ mgr = omap_dss_get_overlay_manager(i);
+
+ if (sysfs_streq(buf, mgr->name))
+ break;
+
+ mgr = NULL;
+ }
+ }
+
+ if (len > 0 && mgr == NULL)
+ return -EINVAL;
+
+ if (mgr)
+ DSSDBG("manager %s found\n", mgr->name);
+
+ if (mgr == ovl->manager)
+ return size;
+
+ old_mgr = ovl->manager;
+
+ r = dispc_runtime_get();
+ if (r)
+ return r;
+
+ /* detach old manager */
+ if (old_mgr) {
+ r = ovl->unset_manager(ovl);
+ if (r) {
+ DSSERR("detach failed\n");
+ goto err;
+ }
+
+ r = old_mgr->apply(old_mgr);
+ if (r)
+ goto err;
+ }
+
+ if (mgr) {
+ r = ovl->set_manager(ovl, mgr);
+ if (r) {
+ DSSERR("Failed to attach overlay\n");
+ goto err;
+ }
+
+ r = mgr->apply(mgr);
+ if (r)
+ goto err;
+ }
+
+ dispc_runtime_put();
+
+ return size;
+
+err:
+ dispc_runtime_put();
+ return r;
+}
+
+static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+ info.width, info.height);
+}
+
+static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.screen_width);
+}
+
+static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+ info.pos_x, info.pos_y);
+}
+
+static ssize_t overlay_position_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ char *last;
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.pos_x = simple_strtoul(buf, &last, 10);
+ ++last;
+ if (last - buf >= size)
+ return -EINVAL;
+
+ info.pos_y = simple_strtoul(last, &last, 10);
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d,%d\n",
+ info.out_width, info.out_height);
+}
+
+static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ char *last;
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.out_width = simple_strtoul(buf, &last, 10);
+ ++last;
+ if (last - buf >= size)
+ return -EINVAL;
+
+ info.out_height = simple_strtoul(last, &last, 10);
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->is_enabled(ovl));
+}
+
+static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
+ size_t size)
+{
+ int r;
+ bool enable;
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
+
+ if (enable)
+ r = ovl->enable(ovl);
+ else
+ r = ovl->disable(ovl);
+
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ info.global_alpha);
+}
+
+static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ u8 alpha;
+ struct omap_overlay_info info;
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
+ return -ENODEV;
+
+ r = kstrtou8(buf, 0, &alpha);
+ if (r)
+ return r;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.global_alpha = alpha;
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_pre_mult_alpha_show(struct omap_overlay *ovl,
+ char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ info.pre_mult_alpha);
+}
+
+static ssize_t overlay_pre_mult_alpha_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ u8 alpha;
+ struct omap_overlay_info info;
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) == 0)
+ return -ENODEV;
+
+ r = kstrtou8(buf, 0, &alpha);
+ if (r)
+ return r;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.pre_mult_alpha = alpha;
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+static ssize_t overlay_zorder_show(struct omap_overlay *ovl, char *buf)
+{
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.zorder);
+}
+
+static ssize_t overlay_zorder_store(struct omap_overlay *ovl,
+ const char *buf, size_t size)
+{
+ int r;
+ u8 zorder;
+ struct omap_overlay_info info;
+
+ if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
+ return -ENODEV;
+
+ r = kstrtou8(buf, 0, &zorder);
+ if (r)
+ return r;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.zorder = zorder;
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ return r;
+
+ if (ovl->manager) {
+ r = ovl->manager->apply(ovl->manager);
+ if (r)
+ return r;
+ }
+
+ return size;
+}
+
+struct overlay_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct omap_overlay *, char *);
+ ssize_t (*store)(struct omap_overlay *, const char *, size_t);
+};
+
+#define OVERLAY_ATTR(_name, _mode, _show, _store) \
+ struct overlay_attribute overlay_attr_##_name = \
+ __ATTR(_name, _mode, _show, _store)
+
+static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
+static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
+ overlay_manager_show, overlay_manager_store);
+static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
+static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
+static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
+ overlay_position_show, overlay_position_store);
+static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
+ overlay_output_size_show, overlay_output_size_store);
+static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
+ overlay_enabled_show, overlay_enabled_store);
+static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
+ overlay_global_alpha_show, overlay_global_alpha_store);
+static OVERLAY_ATTR(pre_mult_alpha, S_IRUGO|S_IWUSR,
+ overlay_pre_mult_alpha_show,
+ overlay_pre_mult_alpha_store);
+static OVERLAY_ATTR(zorder, S_IRUGO|S_IWUSR,
+ overlay_zorder_show, overlay_zorder_store);
+
+static struct attribute *overlay_sysfs_attrs[] = {
+ &overlay_attr_name.attr,
+ &overlay_attr_manager.attr,
+ &overlay_attr_input_size.attr,
+ &overlay_attr_screen_width.attr,
+ &overlay_attr_position.attr,
+ &overlay_attr_output_size.attr,
+ &overlay_attr_enabled.attr,
+ &overlay_attr_global_alpha.attr,
+ &overlay_attr_pre_mult_alpha.attr,
+ &overlay_attr_zorder.attr,
+ NULL
+};
+
+static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct omap_overlay *overlay;
+ struct overlay_attribute *overlay_attr;
+
+ overlay = container_of(kobj, struct omap_overlay, kobj);
+ overlay_attr = container_of(attr, struct overlay_attribute, attr);
+
+ if (!overlay_attr->show)
+ return -ENOENT;
+
+ return overlay_attr->show(overlay, buf);
+}
+
+static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay *overlay;
+ struct overlay_attribute *overlay_attr;
+
+ overlay = container_of(kobj, struct omap_overlay, kobj);
+ overlay_attr = container_of(attr, struct overlay_attribute, attr);
+
+ if (!overlay_attr->store)
+ return -ENOENT;
+
+ return overlay_attr->store(overlay, buf, size);
+}
+
+static const struct sysfs_ops overlay_sysfs_ops = {
+ .show = overlay_attr_show,
+ .store = overlay_attr_store,
+};
+
+static struct kobj_type overlay_ktype = {
+ .sysfs_ops = &overlay_sysfs_ops,
+ .default_attrs = overlay_sysfs_attrs,
+};
+
+int dss_overlay_kobj_init(struct omap_overlay *ovl,
+ struct platform_device *pdev)
+{
+ return kobject_init_and_add(&ovl->kobj, &overlay_ktype,
+ &pdev->dev.kobj, "overlay%d", ovl->id);
+}
+
+void dss_overlay_kobj_uninit(struct omap_overlay *ovl)
+{
+ kobject_del(&ovl->kobj);
+ kobject_put(&ovl->kobj);
+}
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 94e74be..e3d4068 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/sysfs.h>
-#include <linux/kobject.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/slab.h>
@@ -39,417 +38,6 @@
static int num_overlays;
static struct omap_overlay *overlays;
-static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
-}
-
-static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n",
- ovl->manager ? ovl->manager->name : "<none>");
-}
-
-static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
- size_t size)
-{
- int i, r;
- struct omap_overlay_manager *mgr = NULL;
- struct omap_overlay_manager *old_mgr;
- int len = size;
-
- if (buf[size-1] == '\n')
- --len;
-
- if (len > 0) {
- for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
- mgr = omap_dss_get_overlay_manager(i);
-
- if (sysfs_streq(buf, mgr->name))
- break;
-
- mgr = NULL;
- }
- }
-
- if (len > 0 && mgr == NULL)
- return -EINVAL;
-
- if (mgr)
- DSSDBG("manager %s found\n", mgr->name);
-
- if (mgr == ovl->manager)
- return size;
-
- old_mgr = ovl->manager;
-
- r = dispc_runtime_get();
- if (r)
- return r;
-
- /* detach old manager */
- if (old_mgr) {
- r = ovl->unset_manager(ovl);
- if (r) {
- DSSERR("detach failed\n");
- goto err;
- }
-
- r = old_mgr->apply(old_mgr);
- if (r)
- goto err;
- }
-
- if (mgr) {
- r = ovl->set_manager(ovl, mgr);
- if (r) {
- DSSERR("Failed to attach overlay\n");
- goto err;
- }
-
- r = mgr->apply(mgr);
- if (r)
- goto err;
- }
-
- dispc_runtime_put();
-
- return size;
-
-err:
- dispc_runtime_put();
- return r;
-}
-
-static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d,%d\n",
- info.width, info.height);
-}
-
-static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", info.screen_width);
-}
-
-static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d,%d\n",
- info.pos_x, info.pos_y);
-}
-
-static ssize_t overlay_position_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- char *last;
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.pos_x = simple_strtoul(buf, &last, 10);
- ++last;
- if (last - buf >= size)
- return -EINVAL;
-
- info.pos_y = simple_strtoul(last, &last, 10);
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d,%d\n",
- info.out_width, info.out_height);
-}
-
-static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- char *last;
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.out_width = simple_strtoul(buf, &last, 10);
- ++last;
- if (last - buf >= size)
- return -EINVAL;
-
- info.out_height = simple_strtoul(last, &last, 10);
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%d\n", ovl->is_enabled(ovl));
-}
-
-static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf,
- size_t size)
-{
- int r;
- bool enable;
-
- r = strtobool(buf, &enable);
- if (r)
- return r;
-
- if (enable)
- r = ovl->enable(ovl);
- else
- r = ovl->disable(ovl);
-
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t overlay_global_alpha_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n",
- info.global_alpha);
-}
-
-static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- u8 alpha;
- struct omap_overlay_info info;
-
- if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
- return -ENODEV;
-
- r = kstrtou8(buf, 0, &alpha);
- if (r)
- return r;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.global_alpha = alpha;
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-static ssize_t overlay_pre_mult_alpha_show(struct omap_overlay *ovl,
- char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n",
- info.pre_mult_alpha);
-}
-
-static ssize_t overlay_pre_mult_alpha_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- u8 alpha;
- struct omap_overlay_info info;
-
- if ((ovl->caps & OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA) == 0)
- return -ENODEV;
-
- r = kstrtou8(buf, 0, &alpha);
- if (r)
- return r;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.pre_mult_alpha = alpha;
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-static ssize_t overlay_zorder_show(struct omap_overlay *ovl, char *buf)
-{
- struct omap_overlay_info info;
-
- ovl->get_overlay_info(ovl, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", info.zorder);
-}
-
-static ssize_t overlay_zorder_store(struct omap_overlay *ovl,
- const char *buf, size_t size)
-{
- int r;
- u8 zorder;
- struct omap_overlay_info info;
-
- if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
- return -ENODEV;
-
- r = kstrtou8(buf, 0, &zorder);
- if (r)
- return r;
-
- ovl->get_overlay_info(ovl, &info);
-
- info.zorder = zorder;
-
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- return r;
-
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
- if (r)
- return r;
- }
-
- return size;
-}
-
-struct overlay_attribute {
- struct attribute attr;
- ssize_t (*show)(struct omap_overlay *, char *);
- ssize_t (*store)(struct omap_overlay *, const char *, size_t);
-};
-
-#define OVERLAY_ATTR(_name, _mode, _show, _store) \
- struct overlay_attribute overlay_attr_##_name = \
- __ATTR(_name, _mode, _show, _store)
-
-static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
-static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
- overlay_manager_show, overlay_manager_store);
-static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
-static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
-static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
- overlay_position_show, overlay_position_store);
-static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
- overlay_output_size_show, overlay_output_size_store);
-static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
- overlay_enabled_show, overlay_enabled_store);
-static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
- overlay_global_alpha_show, overlay_global_alpha_store);
-static OVERLAY_ATTR(pre_mult_alpha, S_IRUGO|S_IWUSR,
- overlay_pre_mult_alpha_show,
- overlay_pre_mult_alpha_store);
-static OVERLAY_ATTR(zorder, S_IRUGO|S_IWUSR,
- overlay_zorder_show, overlay_zorder_store);
-
-static struct attribute *overlay_sysfs_attrs[] = {
- &overlay_attr_name.attr,
- &overlay_attr_manager.attr,
- &overlay_attr_input_size.attr,
- &overlay_attr_screen_width.attr,
- &overlay_attr_position.attr,
- &overlay_attr_output_size.attr,
- &overlay_attr_enabled.attr,
- &overlay_attr_global_alpha.attr,
- &overlay_attr_pre_mult_alpha.attr,
- &overlay_attr_zorder.attr,
- NULL
-};
-
-static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct omap_overlay *overlay;
- struct overlay_attribute *overlay_attr;
-
- overlay = container_of(kobj, struct omap_overlay, kobj);
- overlay_attr = container_of(attr, struct overlay_attribute, attr);
-
- if (!overlay_attr->show)
- return -ENOENT;
-
- return overlay_attr->show(overlay, buf);
-}
-
-static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t size)
-{
- struct omap_overlay *overlay;
- struct overlay_attribute *overlay_attr;
-
- overlay = container_of(kobj, struct omap_overlay, kobj);
- overlay_attr = container_of(attr, struct overlay_attribute, attr);
-
- if (!overlay_attr->store)
- return -ENOENT;
-
- return overlay_attr->store(overlay, buf, size);
-}
-
-static const struct sysfs_ops overlay_sysfs_ops = {
- .show = overlay_attr_show,
- .store = overlay_attr_store,
-};
-
-static struct kobj_type overlay_ktype = {
- .sysfs_ops = &overlay_sysfs_ops,
- .default_attrs = overlay_sysfs_attrs,
-};
-
int omap_dss_get_num_overlays(void)
{
return num_overlays;
@@ -511,9 +99,7 @@ void dss_init_overlays(struct platform_device *pdev)
ovl->supported_modes =
dss_feat_get_supported_color_modes(ovl->id);
- r = kobject_init_and_add(&ovl->kobj, &overlay_ktype,
- &pdev->dev.kobj, "overlay%d", i);
-
+ r = dss_overlay_kobj_init(ovl, pdev);
if (r)
DSSERR("failed to create sysfs file\n");
}
@@ -594,9 +180,7 @@ void dss_uninit_overlays(struct platform_device *pdev)
for (i = 0; i < num_overlays; ++i) {
struct omap_overlay *ovl = &overlays[i];
-
- kobject_del(&ovl->kobj);
- kobject_put(&ovl->kobj);
+ dss_overlay_kobj_uninit(ovl);
}
kfree(overlays);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 10/17] OMAPDSS: split manager sysfs code
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Separate sysfs code for managers to a separate file. This is a bit
cleaner, and will allow us later to easily switch off the sysfs support
via Kconfig option.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/dss.h | 4 +
drivers/video/omap2/dss/manager-sysfs.c | 499 +++++++++++++++++++++++++++++++
drivers/video/omap2/dss/manager.c | 462 +---------------------------
4 files changed, 506 insertions(+), 461 deletions(-)
create mode 100644 drivers/video/omap2/dss/manager-sysfs.c
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 927d5ce..00a6eb5 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,6 +1,6 @@
obj-$(CONFIG_OMAP2_DSS) += omapdss.o
omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
- manager.o overlay.o overlay-sysfs.o apply.o
+ manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o
omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 11b053e..5e9fd769 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -254,6 +254,10 @@ static inline bool dss_mgr_is_lcd(enum omap_channel id)
return false;
}
+int dss_manager_kobj_init(struct omap_overlay_manager *mgr,
+ struct platform_device *pdev);
+void dss_manager_kobj_uninit(struct omap_overlay_manager *mgr);
+
/* overlay */
void dss_init_overlays(struct platform_device *pdev);
void dss_uninit_overlays(struct platform_device *pdev);
diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/omap2/dss/manager-sysfs.c
new file mode 100644
index 0000000..9b875fb
--- /dev/null
+++ b/drivers/video/omap2/dss/manager-sysfs.c
@@ -0,0 +1,499 @@
+/*
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "MANAGER"
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/jiffies.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
+}
+
+static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ mgr->device ? mgr->device->name : "<none>");
+}
+
+static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ int r = 0;
+ size_t len = size;
+ struct omap_dss_device *dssdev = NULL;
+
+ int match(struct omap_dss_device *dssdev, void *data)
+ {
+ const char *str = data;
+ return sysfs_streq(dssdev->name, str);
+ }
+
+ if (buf[size-1] = '\n')
+ --len;
+
+ if (len > 0)
+ dssdev = omap_dss_find_device((void *)buf, match);
+
+ if (len > 0 && dssdev = NULL)
+ return -EINVAL;
+
+ if (dssdev)
+ DSSDBG("display %s found\n", dssdev->name);
+
+ if (mgr->device) {
+ r = mgr->unset_device(mgr);
+ if (r) {
+ DSSERR("failed to unset display\n");
+ goto put_device;
+ }
+ }
+
+ if (dssdev) {
+ r = mgr->set_device(mgr, dssdev);
+ if (r) {
+ DSSERR("failed to set manager\n");
+ goto put_device;
+ }
+
+ r = mgr->apply(mgr);
+ if (r) {
+ DSSERR("failed to apply dispc config\n");
+ goto put_device;
+ }
+ }
+
+put_device:
+ if (dssdev)
+ omap_dss_put_device(dssdev);
+
+ return r ? r : size;
+}
+
+static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%#x\n", info.default_color);
+}
+
+static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ u32 color;
+ int r;
+
+ r = kstrtouint(buf, 0, &color);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.default_color = color;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static const char *trans_key_type_str[] = {
+ "gfx-destination",
+ "video-source",
+};
+
+static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ enum omap_dss_trans_key_type key_type;
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ key_type = info.trans_key_type;
+ BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str));
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]);
+}
+
+static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ enum omap_dss_trans_key_type key_type;
+ struct omap_overlay_manager_info info;
+ int r;
+
+ for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
+ key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
+ if (sysfs_streq(buf, trans_key_type_str[key_type]))
+ break;
+ }
+
+ if (key_type = ARRAY_SIZE(trans_key_type_str))
+ return -EINVAL;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.trans_key_type = key_type;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%#x\n", info.trans_key);
+}
+
+static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ u32 key_value;
+ int r;
+
+ r = kstrtouint(buf, 0, &key_value);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.trans_key = key_value;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.trans_enabled);
+}
+
+static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ bool enable;
+ int r;
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.trans_enabled = enable;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_alpha_blending_enabled_show(
+ struct omap_overlay_manager *mgr, char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ info.partial_alpha_enabled);
+}
+
+static ssize_t manager_alpha_blending_enabled_store(
+ struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ bool enable;
+ int r;
+
+ WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.partial_alpha_enabled = enable;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_cpr_enable_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.cpr_enable);
+}
+
+static ssize_t manager_cpr_enable_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ int r;
+ bool enable;
+
+ if (!dss_has_feature(FEAT_CPR))
+ return -ENODEV;
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ if (info.cpr_enable = enable)
+ return size;
+
+ info.cpr_enable = enable;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_cpr_coef_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE,
+ "%d %d %d %d %d %d %d %d %d\n",
+ info.cpr_coefs.rr,
+ info.cpr_coefs.rg,
+ info.cpr_coefs.rb,
+ info.cpr_coefs.gr,
+ info.cpr_coefs.gg,
+ info.cpr_coefs.gb,
+ info.cpr_coefs.br,
+ info.cpr_coefs.bg,
+ info.cpr_coefs.bb);
+}
+
+static ssize_t manager_cpr_coef_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ struct omap_dss_cpr_coefs coefs;
+ int r, i;
+ s16 *arr;
+
+ if (!dss_has_feature(FEAT_CPR))
+ return -ENODEV;
+
+ if (sscanf(buf, "%hd %hd %hd %hd %hd %hd %hd %hd %hd",
+ &coefs.rr, &coefs.rg, &coefs.rb,
+ &coefs.gr, &coefs.gg, &coefs.gb,
+ &coefs.br, &coefs.bg, &coefs.bb) != 9)
+ return -EINVAL;
+
+ arr = (s16[]){ coefs.rr, coefs.rg, coefs.rb,
+ coefs.gr, coefs.gg, coefs.gb,
+ coefs.br, coefs.bg, coefs.bb };
+
+ for (i = 0; i < 9; ++i) {
+ if (arr[i] < -512 || arr[i] > 511)
+ return -EINVAL;
+ }
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.cpr_coefs = coefs;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+struct manager_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct omap_overlay_manager *, char *);
+ ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t);
+};
+
+#define MANAGER_ATTR(_name, _mode, _show, _store) \
+ struct manager_attribute manager_attr_##_name = \
+ __ATTR(_name, _mode, _show, _store)
+
+static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
+static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
+ manager_display_show, manager_display_store);
+static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
+ manager_default_color_show, manager_default_color_store);
+static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR,
+ manager_trans_key_type_show, manager_trans_key_type_store);
+static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR,
+ manager_trans_key_value_show, manager_trans_key_value_store);
+static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR,
+ manager_trans_key_enabled_show,
+ manager_trans_key_enabled_store);
+static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
+ manager_alpha_blending_enabled_show,
+ manager_alpha_blending_enabled_store);
+static MANAGER_ATTR(cpr_enable, S_IRUGO|S_IWUSR,
+ manager_cpr_enable_show,
+ manager_cpr_enable_store);
+static MANAGER_ATTR(cpr_coef, S_IRUGO|S_IWUSR,
+ manager_cpr_coef_show,
+ manager_cpr_coef_store);
+
+
+static struct attribute *manager_sysfs_attrs[] = {
+ &manager_attr_name.attr,
+ &manager_attr_display.attr,
+ &manager_attr_default_color.attr,
+ &manager_attr_trans_key_type.attr,
+ &manager_attr_trans_key_value.attr,
+ &manager_attr_trans_key_enabled.attr,
+ &manager_attr_alpha_blending_enabled.attr,
+ &manager_attr_cpr_enable.attr,
+ &manager_attr_cpr_coef.attr,
+ NULL
+};
+
+static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct omap_overlay_manager *manager;
+ struct manager_attribute *manager_attr;
+
+ manager = container_of(kobj, struct omap_overlay_manager, kobj);
+ manager_attr = container_of(attr, struct manager_attribute, attr);
+
+ if (!manager_attr->show)
+ return -ENOENT;
+
+ return manager_attr->show(manager, buf);
+}
+
+static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager *manager;
+ struct manager_attribute *manager_attr;
+
+ manager = container_of(kobj, struct omap_overlay_manager, kobj);
+ manager_attr = container_of(attr, struct manager_attribute, attr);
+
+ if (!manager_attr->store)
+ return -ENOENT;
+
+ return manager_attr->store(manager, buf, size);
+}
+
+static const struct sysfs_ops manager_sysfs_ops = {
+ .show = manager_attr_show,
+ .store = manager_attr_store,
+};
+
+static struct kobj_type manager_ktype = {
+ .sysfs_ops = &manager_sysfs_ops,
+ .default_attrs = manager_sysfs_attrs,
+};
+
+int dss_manager_kobj_init(struct omap_overlay_manager *mgr,
+ struct platform_device *pdev)
+{
+ return kobject_init_and_add(&mgr->kobj, &manager_ktype,
+ &pdev->dev.kobj, "manager%d", mgr->id);
+}
+
+void dss_manager_kobj_uninit(struct omap_overlay_manager *mgr)
+{
+ kobject_del(&mgr->kobj);
+ kobject_put(&mgr->kobj);
+}
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 53710fa..383314f 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -36,460 +36,6 @@
static int num_managers;
static struct omap_overlay_manager *managers;
-static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
-}
-
-static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n",
- mgr->device ? mgr->device->name : "<none>");
-}
-
-static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- int r = 0;
- size_t len = size;
- struct omap_dss_device *dssdev = NULL;
-
- int match(struct omap_dss_device *dssdev, void *data)
- {
- const char *str = data;
- return sysfs_streq(dssdev->name, str);
- }
-
- if (buf[size-1] = '\n')
- --len;
-
- if (len > 0)
- dssdev = omap_dss_find_device((void *)buf, match);
-
- if (len > 0 && dssdev = NULL)
- return -EINVAL;
-
- if (dssdev)
- DSSDBG("display %s found\n", dssdev->name);
-
- if (mgr->device) {
- r = mgr->unset_device(mgr);
- if (r) {
- DSSERR("failed to unset display\n");
- goto put_device;
- }
- }
-
- if (dssdev) {
- r = mgr->set_device(mgr, dssdev);
- if (r) {
- DSSERR("failed to set manager\n");
- goto put_device;
- }
-
- r = mgr->apply(mgr);
- if (r) {
- DSSERR("failed to apply dispc config\n");
- goto put_device;
- }
- }
-
-put_device:
- if (dssdev)
- omap_dss_put_device(dssdev);
-
- return r ? r : size;
-}
-
-static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE, "%#x\n", info.default_color);
-}
-
-static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- u32 color;
- int r;
-
- r = kstrtouint(buf, 0, &color);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- info.default_color = color;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static const char *trans_key_type_str[] = {
- "gfx-destination",
- "video-source",
-};
-
-static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- enum omap_dss_trans_key_type key_type;
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- key_type = info.trans_key_type;
- BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str));
-
- return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]);
-}
-
-static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- enum omap_dss_trans_key_type key_type;
- struct omap_overlay_manager_info info;
- int r;
-
- for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
- key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
- if (sysfs_streq(buf, trans_key_type_str[key_type]))
- break;
- }
-
- if (key_type = ARRAY_SIZE(trans_key_type_str))
- return -EINVAL;
-
- mgr->get_manager_info(mgr, &info);
-
- info.trans_key_type = key_type;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE, "%#x\n", info.trans_key);
-}
-
-static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- u32 key_value;
- int r;
-
- r = kstrtouint(buf, 0, &key_value);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- info.trans_key = key_value;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", info.trans_enabled);
-}
-
-static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- bool enable;
- int r;
-
- r = strtobool(buf, &enable);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- info.trans_enabled = enable;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_alpha_blending_enabled_show(
- struct omap_overlay_manager *mgr, char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
-
- return snprintf(buf, PAGE_SIZE, "%d\n",
- info.partial_alpha_enabled);
-}
-
-static ssize_t manager_alpha_blending_enabled_store(
- struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- bool enable;
- int r;
-
- WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
-
- r = strtobool(buf, &enable);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- info.partial_alpha_enabled = enable;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_cpr_enable_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", info.cpr_enable);
-}
-
-static ssize_t manager_cpr_enable_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- int r;
- bool enable;
-
- if (!dss_has_feature(FEAT_CPR))
- return -ENODEV;
-
- r = strtobool(buf, &enable);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- if (info.cpr_enable = enable)
- return size;
-
- info.cpr_enable = enable;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_cpr_coef_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE,
- "%d %d %d %d %d %d %d %d %d\n",
- info.cpr_coefs.rr,
- info.cpr_coefs.rg,
- info.cpr_coefs.rb,
- info.cpr_coefs.gr,
- info.cpr_coefs.gg,
- info.cpr_coefs.gb,
- info.cpr_coefs.br,
- info.cpr_coefs.bg,
- info.cpr_coefs.bb);
-}
-
-static ssize_t manager_cpr_coef_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- struct omap_dss_cpr_coefs coefs;
- int r, i;
- s16 *arr;
-
- if (!dss_has_feature(FEAT_CPR))
- return -ENODEV;
-
- if (sscanf(buf, "%hd %hd %hd %hd %hd %hd %hd %hd %hd",
- &coefs.rr, &coefs.rg, &coefs.rb,
- &coefs.gr, &coefs.gg, &coefs.gb,
- &coefs.br, &coefs.bg, &coefs.bb) != 9)
- return -EINVAL;
-
- arr = (s16[]){ coefs.rr, coefs.rg, coefs.rb,
- coefs.gr, coefs.gg, coefs.gb,
- coefs.br, coefs.bg, coefs.bb };
-
- for (i = 0; i < 9; ++i) {
- if (arr[i] < -512 || arr[i] > 511)
- return -EINVAL;
- }
-
- mgr->get_manager_info(mgr, &info);
-
- info.cpr_coefs = coefs;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-struct manager_attribute {
- struct attribute attr;
- ssize_t (*show)(struct omap_overlay_manager *, char *);
- ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t);
-};
-
-#define MANAGER_ATTR(_name, _mode, _show, _store) \
- struct manager_attribute manager_attr_##_name = \
- __ATTR(_name, _mode, _show, _store)
-
-static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
-static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
- manager_display_show, manager_display_store);
-static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
- manager_default_color_show, manager_default_color_store);
-static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR,
- manager_trans_key_type_show, manager_trans_key_type_store);
-static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR,
- manager_trans_key_value_show, manager_trans_key_value_store);
-static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR,
- manager_trans_key_enabled_show,
- manager_trans_key_enabled_store);
-static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
- manager_alpha_blending_enabled_show,
- manager_alpha_blending_enabled_store);
-static MANAGER_ATTR(cpr_enable, S_IRUGO|S_IWUSR,
- manager_cpr_enable_show,
- manager_cpr_enable_store);
-static MANAGER_ATTR(cpr_coef, S_IRUGO|S_IWUSR,
- manager_cpr_coef_show,
- manager_cpr_coef_store);
-
-
-static struct attribute *manager_sysfs_attrs[] = {
- &manager_attr_name.attr,
- &manager_attr_display.attr,
- &manager_attr_default_color.attr,
- &manager_attr_trans_key_type.attr,
- &manager_attr_trans_key_value.attr,
- &manager_attr_trans_key_enabled.attr,
- &manager_attr_alpha_blending_enabled.attr,
- &manager_attr_cpr_enable.attr,
- &manager_attr_cpr_coef.attr,
- NULL
-};
-
-static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct omap_overlay_manager *manager;
- struct manager_attribute *manager_attr;
-
- manager = container_of(kobj, struct omap_overlay_manager, kobj);
- manager_attr = container_of(attr, struct manager_attribute, attr);
-
- if (!manager_attr->show)
- return -ENOENT;
-
- return manager_attr->show(manager, buf);
-}
-
-static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager *manager;
- struct manager_attribute *manager_attr;
-
- manager = container_of(kobj, struct omap_overlay_manager, kobj);
- manager_attr = container_of(attr, struct manager_attribute, attr);
-
- if (!manager_attr->store)
- return -ENOENT;
-
- return manager_attr->store(manager, buf, size);
-}
-
-static const struct sysfs_ops manager_sysfs_ops = {
- .show = manager_attr_show,
- .store = manager_attr_store,
-};
-
-static struct kobj_type manager_ktype = {
- .sysfs_ops = &manager_sysfs_ops,
- .default_attrs = manager_sysfs_attrs,
-};
-
static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
{
unsigned long timeout = msecs_to_jiffies(500);
@@ -561,9 +107,7 @@ int dss_init_overlay_managers(struct platform_device *pdev)
INIT_LIST_HEAD(&mgr->overlays);
- r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
- &pdev->dev.kobj, "manager%d", i);
-
+ r = dss_manager_kobj_init(mgr, pdev);
if (r)
DSSERR("failed to create sysfs file\n");
}
@@ -577,9 +121,7 @@ void dss_uninit_overlay_managers(struct platform_device *pdev)
for (i = 0; i < num_managers; ++i) {
struct omap_overlay_manager *mgr = &managers[i];
-
- kobject_del(&mgr->kobj);
- kobject_put(&mgr->kobj);
+ dss_manager_kobj_uninit(mgr);
}
kfree(managers);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 10/17] OMAPDSS: split manager sysfs code
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Separate sysfs code for managers to a separate file. This is a bit
cleaner, and will allow us later to easily switch off the sysfs support
via Kconfig option.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/Makefile | 2 +-
drivers/video/omap2/dss/dss.h | 4 +
drivers/video/omap2/dss/manager-sysfs.c | 499 +++++++++++++++++++++++++++++++
drivers/video/omap2/dss/manager.c | 462 +---------------------------
4 files changed, 506 insertions(+), 461 deletions(-)
create mode 100644 drivers/video/omap2/dss/manager-sysfs.c
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 927d5ce..00a6eb5 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,6 +1,6 @@
obj-$(CONFIG_OMAP2_DSS) += omapdss.o
omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
- manager.o overlay.o overlay-sysfs.o apply.o
+ manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o
omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 11b053e..5e9fd769 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -254,6 +254,10 @@ static inline bool dss_mgr_is_lcd(enum omap_channel id)
return false;
}
+int dss_manager_kobj_init(struct omap_overlay_manager *mgr,
+ struct platform_device *pdev);
+void dss_manager_kobj_uninit(struct omap_overlay_manager *mgr);
+
/* overlay */
void dss_init_overlays(struct platform_device *pdev);
void dss_uninit_overlays(struct platform_device *pdev);
diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/omap2/dss/manager-sysfs.c
new file mode 100644
index 0000000..9b875fb
--- /dev/null
+++ b/drivers/video/omap2/dss/manager-sysfs.c
@@ -0,0 +1,499 @@
+/*
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Some code and ideas taken from drivers/video/omap/ driver
+ * by Imre Deak.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "MANAGER"
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/jiffies.h>
+
+#include <video/omapdss.h>
+
+#include "dss.h"
+#include "dss_features.h"
+
+static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
+}
+
+static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ mgr->device ? mgr->device->name : "<none>");
+}
+
+static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ int r = 0;
+ size_t len = size;
+ struct omap_dss_device *dssdev = NULL;
+
+ int match(struct omap_dss_device *dssdev, void *data)
+ {
+ const char *str = data;
+ return sysfs_streq(dssdev->name, str);
+ }
+
+ if (buf[size-1] == '\n')
+ --len;
+
+ if (len > 0)
+ dssdev = omap_dss_find_device((void *)buf, match);
+
+ if (len > 0 && dssdev == NULL)
+ return -EINVAL;
+
+ if (dssdev)
+ DSSDBG("display %s found\n", dssdev->name);
+
+ if (mgr->device) {
+ r = mgr->unset_device(mgr);
+ if (r) {
+ DSSERR("failed to unset display\n");
+ goto put_device;
+ }
+ }
+
+ if (dssdev) {
+ r = mgr->set_device(mgr, dssdev);
+ if (r) {
+ DSSERR("failed to set manager\n");
+ goto put_device;
+ }
+
+ r = mgr->apply(mgr);
+ if (r) {
+ DSSERR("failed to apply dispc config\n");
+ goto put_device;
+ }
+ }
+
+put_device:
+ if (dssdev)
+ omap_dss_put_device(dssdev);
+
+ return r ? r : size;
+}
+
+static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%#x\n", info.default_color);
+}
+
+static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ u32 color;
+ int r;
+
+ r = kstrtouint(buf, 0, &color);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.default_color = color;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static const char *trans_key_type_str[] = {
+ "gfx-destination",
+ "video-source",
+};
+
+static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ enum omap_dss_trans_key_type key_type;
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ key_type = info.trans_key_type;
+ BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str));
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]);
+}
+
+static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ enum omap_dss_trans_key_type key_type;
+ struct omap_overlay_manager_info info;
+ int r;
+
+ for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
+ key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
+ if (sysfs_streq(buf, trans_key_type_str[key_type]))
+ break;
+ }
+
+ if (key_type == ARRAY_SIZE(trans_key_type_str))
+ return -EINVAL;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.trans_key_type = key_type;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%#x\n", info.trans_key);
+}
+
+static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ u32 key_value;
+ int r;
+
+ r = kstrtouint(buf, 0, &key_value);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.trans_key = key_value;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.trans_enabled);
+}
+
+static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ bool enable;
+ int r;
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.trans_enabled = enable;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_alpha_blending_enabled_show(
+ struct omap_overlay_manager *mgr, char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ info.partial_alpha_enabled);
+}
+
+static ssize_t manager_alpha_blending_enabled_store(
+ struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ bool enable;
+ int r;
+
+ WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.partial_alpha_enabled = enable;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_cpr_enable_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", info.cpr_enable);
+}
+
+static ssize_t manager_cpr_enable_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ int r;
+ bool enable;
+
+ if (!dss_has_feature(FEAT_CPR))
+ return -ENODEV;
+
+ r = strtobool(buf, &enable);
+ if (r)
+ return r;
+
+ mgr->get_manager_info(mgr, &info);
+
+ if (info.cpr_enable == enable)
+ return size;
+
+ info.cpr_enable = enable;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+static ssize_t manager_cpr_coef_show(struct omap_overlay_manager *mgr,
+ char *buf)
+{
+ struct omap_overlay_manager_info info;
+
+ mgr->get_manager_info(mgr, &info);
+
+ return snprintf(buf, PAGE_SIZE,
+ "%d %d %d %d %d %d %d %d %d\n",
+ info.cpr_coefs.rr,
+ info.cpr_coefs.rg,
+ info.cpr_coefs.rb,
+ info.cpr_coefs.gr,
+ info.cpr_coefs.gg,
+ info.cpr_coefs.gb,
+ info.cpr_coefs.br,
+ info.cpr_coefs.bg,
+ info.cpr_coefs.bb);
+}
+
+static ssize_t manager_cpr_coef_store(struct omap_overlay_manager *mgr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager_info info;
+ struct omap_dss_cpr_coefs coefs;
+ int r, i;
+ s16 *arr;
+
+ if (!dss_has_feature(FEAT_CPR))
+ return -ENODEV;
+
+ if (sscanf(buf, "%hd %hd %hd %hd %hd %hd %hd %hd %hd",
+ &coefs.rr, &coefs.rg, &coefs.rb,
+ &coefs.gr, &coefs.gg, &coefs.gb,
+ &coefs.br, &coefs.bg, &coefs.bb) != 9)
+ return -EINVAL;
+
+ arr = (s16[]){ coefs.rr, coefs.rg, coefs.rb,
+ coefs.gr, coefs.gg, coefs.gb,
+ coefs.br, coefs.bg, coefs.bb };
+
+ for (i = 0; i < 9; ++i) {
+ if (arr[i] < -512 || arr[i] > 511)
+ return -EINVAL;
+ }
+
+ mgr->get_manager_info(mgr, &info);
+
+ info.cpr_coefs = coefs;
+
+ r = mgr->set_manager_info(mgr, &info);
+ if (r)
+ return r;
+
+ r = mgr->apply(mgr);
+ if (r)
+ return r;
+
+ return size;
+}
+
+struct manager_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct omap_overlay_manager *, char *);
+ ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t);
+};
+
+#define MANAGER_ATTR(_name, _mode, _show, _store) \
+ struct manager_attribute manager_attr_##_name = \
+ __ATTR(_name, _mode, _show, _store)
+
+static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
+static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
+ manager_display_show, manager_display_store);
+static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
+ manager_default_color_show, manager_default_color_store);
+static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR,
+ manager_trans_key_type_show, manager_trans_key_type_store);
+static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR,
+ manager_trans_key_value_show, manager_trans_key_value_store);
+static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR,
+ manager_trans_key_enabled_show,
+ manager_trans_key_enabled_store);
+static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
+ manager_alpha_blending_enabled_show,
+ manager_alpha_blending_enabled_store);
+static MANAGER_ATTR(cpr_enable, S_IRUGO|S_IWUSR,
+ manager_cpr_enable_show,
+ manager_cpr_enable_store);
+static MANAGER_ATTR(cpr_coef, S_IRUGO|S_IWUSR,
+ manager_cpr_coef_show,
+ manager_cpr_coef_store);
+
+
+static struct attribute *manager_sysfs_attrs[] = {
+ &manager_attr_name.attr,
+ &manager_attr_display.attr,
+ &manager_attr_default_color.attr,
+ &manager_attr_trans_key_type.attr,
+ &manager_attr_trans_key_value.attr,
+ &manager_attr_trans_key_enabled.attr,
+ &manager_attr_alpha_blending_enabled.attr,
+ &manager_attr_cpr_enable.attr,
+ &manager_attr_cpr_coef.attr,
+ NULL
+};
+
+static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct omap_overlay_manager *manager;
+ struct manager_attribute *manager_attr;
+
+ manager = container_of(kobj, struct omap_overlay_manager, kobj);
+ manager_attr = container_of(attr, struct manager_attribute, attr);
+
+ if (!manager_attr->show)
+ return -ENOENT;
+
+ return manager_attr->show(manager, buf);
+}
+
+static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_overlay_manager *manager;
+ struct manager_attribute *manager_attr;
+
+ manager = container_of(kobj, struct omap_overlay_manager, kobj);
+ manager_attr = container_of(attr, struct manager_attribute, attr);
+
+ if (!manager_attr->store)
+ return -ENOENT;
+
+ return manager_attr->store(manager, buf, size);
+}
+
+static const struct sysfs_ops manager_sysfs_ops = {
+ .show = manager_attr_show,
+ .store = manager_attr_store,
+};
+
+static struct kobj_type manager_ktype = {
+ .sysfs_ops = &manager_sysfs_ops,
+ .default_attrs = manager_sysfs_attrs,
+};
+
+int dss_manager_kobj_init(struct omap_overlay_manager *mgr,
+ struct platform_device *pdev)
+{
+ return kobject_init_and_add(&mgr->kobj, &manager_ktype,
+ &pdev->dev.kobj, "manager%d", mgr->id);
+}
+
+void dss_manager_kobj_uninit(struct omap_overlay_manager *mgr)
+{
+ kobject_del(&mgr->kobj);
+ kobject_put(&mgr->kobj);
+}
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 53710fa..383314f 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -36,460 +36,6 @@
static int num_managers;
static struct omap_overlay_manager *managers;
-static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
-}
-
-static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n",
- mgr->device ? mgr->device->name : "<none>");
-}
-
-static ssize_t manager_display_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- int r = 0;
- size_t len = size;
- struct omap_dss_device *dssdev = NULL;
-
- int match(struct omap_dss_device *dssdev, void *data)
- {
- const char *str = data;
- return sysfs_streq(dssdev->name, str);
- }
-
- if (buf[size-1] == '\n')
- --len;
-
- if (len > 0)
- dssdev = omap_dss_find_device((void *)buf, match);
-
- if (len > 0 && dssdev == NULL)
- return -EINVAL;
-
- if (dssdev)
- DSSDBG("display %s found\n", dssdev->name);
-
- if (mgr->device) {
- r = mgr->unset_device(mgr);
- if (r) {
- DSSERR("failed to unset display\n");
- goto put_device;
- }
- }
-
- if (dssdev) {
- r = mgr->set_device(mgr, dssdev);
- if (r) {
- DSSERR("failed to set manager\n");
- goto put_device;
- }
-
- r = mgr->apply(mgr);
- if (r) {
- DSSERR("failed to apply dispc config\n");
- goto put_device;
- }
- }
-
-put_device:
- if (dssdev)
- omap_dss_put_device(dssdev);
-
- return r ? r : size;
-}
-
-static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE, "%#x\n", info.default_color);
-}
-
-static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- u32 color;
- int r;
-
- r = kstrtouint(buf, 0, &color);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- info.default_color = color;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static const char *trans_key_type_str[] = {
- "gfx-destination",
- "video-source",
-};
-
-static ssize_t manager_trans_key_type_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- enum omap_dss_trans_key_type key_type;
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- key_type = info.trans_key_type;
- BUG_ON(key_type >= ARRAY_SIZE(trans_key_type_str));
-
- return snprintf(buf, PAGE_SIZE, "%s\n", trans_key_type_str[key_type]);
-}
-
-static ssize_t manager_trans_key_type_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- enum omap_dss_trans_key_type key_type;
- struct omap_overlay_manager_info info;
- int r;
-
- for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
- key_type < ARRAY_SIZE(trans_key_type_str); key_type++) {
- if (sysfs_streq(buf, trans_key_type_str[key_type]))
- break;
- }
-
- if (key_type == ARRAY_SIZE(trans_key_type_str))
- return -EINVAL;
-
- mgr->get_manager_info(mgr, &info);
-
- info.trans_key_type = key_type;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_trans_key_value_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE, "%#x\n", info.trans_key);
-}
-
-static ssize_t manager_trans_key_value_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- u32 key_value;
- int r;
-
- r = kstrtouint(buf, 0, &key_value);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- info.trans_key = key_value;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_trans_key_enabled_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", info.trans_enabled);
-}
-
-static ssize_t manager_trans_key_enabled_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- bool enable;
- int r;
-
- r = strtobool(buf, &enable);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- info.trans_enabled = enable;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_alpha_blending_enabled_show(
- struct omap_overlay_manager *mgr, char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
-
- return snprintf(buf, PAGE_SIZE, "%d\n",
- info.partial_alpha_enabled);
-}
-
-static ssize_t manager_alpha_blending_enabled_store(
- struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- bool enable;
- int r;
-
- WARN_ON(!dss_has_feature(FEAT_ALPHA_FIXED_ZORDER));
-
- r = strtobool(buf, &enable);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- info.partial_alpha_enabled = enable;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_cpr_enable_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", info.cpr_enable);
-}
-
-static ssize_t manager_cpr_enable_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- int r;
- bool enable;
-
- if (!dss_has_feature(FEAT_CPR))
- return -ENODEV;
-
- r = strtobool(buf, &enable);
- if (r)
- return r;
-
- mgr->get_manager_info(mgr, &info);
-
- if (info.cpr_enable == enable)
- return size;
-
- info.cpr_enable = enable;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-static ssize_t manager_cpr_coef_show(struct omap_overlay_manager *mgr,
- char *buf)
-{
- struct omap_overlay_manager_info info;
-
- mgr->get_manager_info(mgr, &info);
-
- return snprintf(buf, PAGE_SIZE,
- "%d %d %d %d %d %d %d %d %d\n",
- info.cpr_coefs.rr,
- info.cpr_coefs.rg,
- info.cpr_coefs.rb,
- info.cpr_coefs.gr,
- info.cpr_coefs.gg,
- info.cpr_coefs.gb,
- info.cpr_coefs.br,
- info.cpr_coefs.bg,
- info.cpr_coefs.bb);
-}
-
-static ssize_t manager_cpr_coef_store(struct omap_overlay_manager *mgr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager_info info;
- struct omap_dss_cpr_coefs coefs;
- int r, i;
- s16 *arr;
-
- if (!dss_has_feature(FEAT_CPR))
- return -ENODEV;
-
- if (sscanf(buf, "%hd %hd %hd %hd %hd %hd %hd %hd %hd",
- &coefs.rr, &coefs.rg, &coefs.rb,
- &coefs.gr, &coefs.gg, &coefs.gb,
- &coefs.br, &coefs.bg, &coefs.bb) != 9)
- return -EINVAL;
-
- arr = (s16[]){ coefs.rr, coefs.rg, coefs.rb,
- coefs.gr, coefs.gg, coefs.gb,
- coefs.br, coefs.bg, coefs.bb };
-
- for (i = 0; i < 9; ++i) {
- if (arr[i] < -512 || arr[i] > 511)
- return -EINVAL;
- }
-
- mgr->get_manager_info(mgr, &info);
-
- info.cpr_coefs = coefs;
-
- r = mgr->set_manager_info(mgr, &info);
- if (r)
- return r;
-
- r = mgr->apply(mgr);
- if (r)
- return r;
-
- return size;
-}
-
-struct manager_attribute {
- struct attribute attr;
- ssize_t (*show)(struct omap_overlay_manager *, char *);
- ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t);
-};
-
-#define MANAGER_ATTR(_name, _mode, _show, _store) \
- struct manager_attribute manager_attr_##_name = \
- __ATTR(_name, _mode, _show, _store)
-
-static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
-static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
- manager_display_show, manager_display_store);
-static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
- manager_default_color_show, manager_default_color_store);
-static MANAGER_ATTR(trans_key_type, S_IRUGO|S_IWUSR,
- manager_trans_key_type_show, manager_trans_key_type_store);
-static MANAGER_ATTR(trans_key_value, S_IRUGO|S_IWUSR,
- manager_trans_key_value_show, manager_trans_key_value_store);
-static MANAGER_ATTR(trans_key_enabled, S_IRUGO|S_IWUSR,
- manager_trans_key_enabled_show,
- manager_trans_key_enabled_store);
-static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
- manager_alpha_blending_enabled_show,
- manager_alpha_blending_enabled_store);
-static MANAGER_ATTR(cpr_enable, S_IRUGO|S_IWUSR,
- manager_cpr_enable_show,
- manager_cpr_enable_store);
-static MANAGER_ATTR(cpr_coef, S_IRUGO|S_IWUSR,
- manager_cpr_coef_show,
- manager_cpr_coef_store);
-
-
-static struct attribute *manager_sysfs_attrs[] = {
- &manager_attr_name.attr,
- &manager_attr_display.attr,
- &manager_attr_default_color.attr,
- &manager_attr_trans_key_type.attr,
- &manager_attr_trans_key_value.attr,
- &manager_attr_trans_key_enabled.attr,
- &manager_attr_alpha_blending_enabled.attr,
- &manager_attr_cpr_enable.attr,
- &manager_attr_cpr_coef.attr,
- NULL
-};
-
-static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct omap_overlay_manager *manager;
- struct manager_attribute *manager_attr;
-
- manager = container_of(kobj, struct omap_overlay_manager, kobj);
- manager_attr = container_of(attr, struct manager_attribute, attr);
-
- if (!manager_attr->show)
- return -ENOENT;
-
- return manager_attr->show(manager, buf);
-}
-
-static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t size)
-{
- struct omap_overlay_manager *manager;
- struct manager_attribute *manager_attr;
-
- manager = container_of(kobj, struct omap_overlay_manager, kobj);
- manager_attr = container_of(attr, struct manager_attribute, attr);
-
- if (!manager_attr->store)
- return -ENOENT;
-
- return manager_attr->store(manager, buf, size);
-}
-
-static const struct sysfs_ops manager_sysfs_ops = {
- .show = manager_attr_show,
- .store = manager_attr_store,
-};
-
-static struct kobj_type manager_ktype = {
- .sysfs_ops = &manager_sysfs_ops,
- .default_attrs = manager_sysfs_attrs,
-};
-
static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
{
unsigned long timeout = msecs_to_jiffies(500);
@@ -561,9 +107,7 @@ int dss_init_overlay_managers(struct platform_device *pdev)
INIT_LIST_HEAD(&mgr->overlays);
- r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
- &pdev->dev.kobj, "manager%d", i);
-
+ r = dss_manager_kobj_init(mgr, pdev);
if (r)
DSSERR("failed to create sysfs file\n");
}
@@ -577,9 +121,7 @@ void dss_uninit_overlay_managers(struct platform_device *pdev)
for (i = 0; i < num_managers; ++i) {
struct omap_overlay_manager *mgr = &managers[i];
-
- kobject_del(&mgr->kobj);
- kobject_put(&mgr->kobj);
+ dss_manager_kobj_uninit(mgr);
}
kfree(managers);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 11/17] OMAPDSS: clean up dss_mgr_set_lcd_config
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
dss_mgr_set_lcd_config() can only be called when the output is not
active. This means that most of the code in the function is extra, as
there's no need to write the values to registers, etc, because that will
be handled when the output will be enabled.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 52a5940..53629dd 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1346,7 +1346,7 @@ void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
unsigned long flags;
struct mgr_priv_data *mp = get_mgr_priv(mgr);
- mutex_lock(&apply_lock);
+ spin_lock_irqsave(&data_lock, flags);
if (mp->enabled) {
DSSERR("cannot apply lcd config for %s: manager needs to be disabled\n",
@@ -1354,19 +1354,9 @@ void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
goto out;
}
- spin_lock_irqsave(&data_lock, flags);
-
dss_apply_mgr_lcd_config(mgr, config);
-
- dss_write_regs();
- dss_set_go_bits();
-
- spin_unlock_irqrestore(&data_lock, flags);
-
- wait_pending_extra_info_updates();
-
out:
- mutex_unlock(&apply_lock);
+ spin_unlock_irqrestore(&data_lock, flags);
}
int dss_ovl_set_info(struct omap_overlay *ovl,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 11/17] OMAPDSS: clean up dss_mgr_set_lcd_config
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
dss_mgr_set_lcd_config() can only be called when the output is not
active. This means that most of the code in the function is extra, as
there's no need to write the values to registers, etc, because that will
be handled when the output will be enabled.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 14 ++------------
1 file changed, 2 insertions(+), 12 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 52a5940..53629dd 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1346,7 +1346,7 @@ void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
unsigned long flags;
struct mgr_priv_data *mp = get_mgr_priv(mgr);
- mutex_lock(&apply_lock);
+ spin_lock_irqsave(&data_lock, flags);
if (mp->enabled) {
DSSERR("cannot apply lcd config for %s: manager needs to be disabled\n",
@@ -1354,19 +1354,9 @@ void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
goto out;
}
- spin_lock_irqsave(&data_lock, flags);
-
dss_apply_mgr_lcd_config(mgr, config);
-
- dss_write_regs();
- dss_set_go_bits();
-
- spin_unlock_irqrestore(&data_lock, flags);
-
- wait_pending_extra_info_updates();
-
out:
- mutex_unlock(&apply_lock);
+ spin_unlock_irqrestore(&data_lock, flags);
}
int dss_ovl_set_info(struct omap_overlay *ovl,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
dss_mgr_set_timings() can only be called when the output is not active.
This means that most of the code in the function is extra, as there's no
need to write the values to registers, etc, because that will be handled
when the output will be enabled.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 53629dd..1b49019 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
const struct omap_video_timings *timings)
{
unsigned long flags;
-
- mutex_lock(&apply_lock);
+ struct mgr_priv_data *mp = get_mgr_priv(mgr);
spin_lock_irqsave(&data_lock, flags);
- dss_apply_mgr_timings(mgr, timings);
-
- dss_write_regs();
- dss_set_go_bits();
+ if (mp->enabled) {
+ DSSERR("cannot set timings for %s: manager needs to be disabled\n",
+ mgr->name);
+ goto out;
+ }
+ dss_apply_mgr_timings(mgr, timings);
+out:
spin_unlock_irqrestore(&data_lock, flags);
-
- wait_pending_extra_info_updates();
-
- mutex_unlock(&apply_lock);
}
static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
dss_mgr_set_timings() can only be called when the output is not active.
This means that most of the code in the function is extra, as there's no
need to write the values to registers, etc, because that will be handled
when the output will be enabled.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 53629dd..1b49019 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
const struct omap_video_timings *timings)
{
unsigned long flags;
-
- mutex_lock(&apply_lock);
+ struct mgr_priv_data *mp = get_mgr_priv(mgr);
spin_lock_irqsave(&data_lock, flags);
- dss_apply_mgr_timings(mgr, timings);
-
- dss_write_regs();
- dss_set_go_bits();
+ if (mp->enabled) {
+ DSSERR("cannot set timings for %s: manager needs to be disabled\n",
+ mgr->name);
+ goto out;
+ }
+ dss_apply_mgr_timings(mgr, timings);
+out:
spin_unlock_irqrestore(&data_lock, flags);
-
- wait_pending_extra_info_updates();
-
- mutex_unlock(&apply_lock);
}
static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 13/17] Revert "OMAPDSS: APPLY: add fifo-merge support"
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
This reverts commit 1d71f42b35ed66d90a9a39bc515bb16cfe2d4a46.
Adding fifo merge feature as an omapdss internal configuration was a
mistake. We cannot hide from the users of omapdss the complexities of
fifo merge.
This commit removes the fifo merge support, which luckily is easily done
as it was handled totally inside apply.c.
The plan is to try fifo merge again later when it is more clear how the
hardware acts in various situations, and how the omapdrm wants to use
fifo merge.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 154 ++-------------------------------------
1 file changed, 8 insertions(+), 146 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 1b49019..02943a5 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -993,11 +993,11 @@ static void dss_apply_fifo_merge(bool use_fifo_merge)
dss_data.fifo_merge_dirty = true;
}
-static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
- bool use_fifo_merge)
+static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
{
struct ovl_priv_data *op = get_ovl_priv(ovl);
u32 fifo_low, fifo_high;
+ bool use_fifo_merge = false;
if (!op->enabled && !op->enabling)
return;
@@ -1008,8 +1008,7 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
dss_apply_ovl_fifo_thresholds(ovl, fifo_low, fifo_high);
}
-static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr,
- bool use_fifo_merge)
+static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr)
{
struct omap_overlay *ovl;
struct mgr_priv_data *mp;
@@ -1020,10 +1019,10 @@ static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr,
return;
list_for_each_entry(ovl, &mgr->overlays, list)
- dss_ovl_setup_fifo(ovl, use_fifo_merge);
+ dss_ovl_setup_fifo(ovl);
}
-static void dss_setup_fifos(bool use_fifo_merge)
+static void dss_setup_fifos(void)
{
const int num_mgrs = omap_dss_get_num_overlay_managers();
struct omap_overlay_manager *mgr;
@@ -1031,91 +1030,15 @@ static void dss_setup_fifos(bool use_fifo_merge)
for (i = 0; i < num_mgrs; ++i) {
mgr = omap_dss_get_overlay_manager(i);
- dss_mgr_setup_fifos(mgr, use_fifo_merge);
+ dss_mgr_setup_fifos(mgr);
}
}
-static int get_num_used_managers(void)
-{
- const int num_mgrs = omap_dss_get_num_overlay_managers();
- struct omap_overlay_manager *mgr;
- struct mgr_priv_data *mp;
- int i;
- int enabled_mgrs;
-
- enabled_mgrs = 0;
-
- for (i = 0; i < num_mgrs; ++i) {
- mgr = omap_dss_get_overlay_manager(i);
- mp = get_mgr_priv(mgr);
-
- if (!mp->enabled)
- continue;
-
- enabled_mgrs++;
- }
-
- return enabled_mgrs;
-}
-
-static int get_num_used_overlays(void)
-{
- const int num_ovls = omap_dss_get_num_overlays();
- struct omap_overlay *ovl;
- struct ovl_priv_data *op;
- struct mgr_priv_data *mp;
- int i;
- int enabled_ovls;
-
- enabled_ovls = 0;
-
- for (i = 0; i < num_ovls; ++i) {
- ovl = omap_dss_get_overlay(i);
- op = get_ovl_priv(ovl);
-
- if (!op->enabled && !op->enabling)
- continue;
-
- mp = get_mgr_priv(ovl->manager);
-
- if (!mp->enabled)
- continue;
-
- enabled_ovls++;
- }
-
- return enabled_ovls;
-}
-
-static bool get_use_fifo_merge(void)
-{
- int enabled_mgrs = get_num_used_managers();
- int enabled_ovls = get_num_used_overlays();
-
- if (!dss_has_feature(FEAT_FIFO_MERGE))
- return false;
-
- /*
- * In theory the only requirement for fifomerge is enabled_ovls <= 1.
- * However, if we have two managers enabled and set/unset the fifomerge,
- * we need to set the GO bits in particular sequence for the managers,
- * and wait in between.
- *
- * This is rather difficult as new apply calls can happen at any time,
- * so we simplify the problem by requiring also that enabled_mgrs <= 1.
- * In practice this shouldn't matter, because when only one overlay is
- * enabled, most likely only one output is enabled.
- */
-
- return enabled_mgrs <= 1 && enabled_ovls <= 1;
-}
-
int dss_mgr_enable(struct omap_overlay_manager *mgr)
{
struct mgr_priv_data *mp = get_mgr_priv(mgr);
unsigned long flags;
int r;
- bool fifo_merge;
mutex_lock(&apply_lock);
@@ -1133,23 +1056,11 @@ int dss_mgr_enable(struct omap_overlay_manager *mgr)
goto err;
}
- /* step 1: setup fifos/fifomerge before enabling the manager */
-
- fifo_merge = get_use_fifo_merge();
- dss_setup_fifos(fifo_merge);
- dss_apply_fifo_merge(fifo_merge);
+ dss_setup_fifos();
dss_write_regs();
dss_set_go_bits();
- spin_unlock_irqrestore(&data_lock, flags);
-
- /* wait until fifo config is in */
- wait_pending_extra_info_updates();
-
- /* step 2: enable the manager */
- spin_lock_irqsave(&data_lock, flags);
-
if (!mgr_manual_update(mgr))
mp->updating = true;
@@ -1174,7 +1085,6 @@ void dss_mgr_disable(struct omap_overlay_manager *mgr)
{
struct mgr_priv_data *mp = get_mgr_priv(mgr);
unsigned long flags;
- bool fifo_merge;
mutex_lock(&apply_lock);
@@ -1189,16 +1099,8 @@ void dss_mgr_disable(struct omap_overlay_manager *mgr)
mp->updating = false;
mp->enabled = false;
- fifo_merge = get_use_fifo_merge();
- dss_setup_fifos(fifo_merge);
- dss_apply_fifo_merge(fifo_merge);
-
- dss_write_regs();
- dss_set_go_bits();
-
spin_unlock_irqrestore(&data_lock, flags);
- wait_pending_extra_info_updates();
out:
mutex_unlock(&apply_lock);
}
@@ -1505,7 +1407,6 @@ int dss_ovl_enable(struct omap_overlay *ovl)
{
struct ovl_priv_data *op = get_ovl_priv(ovl);
unsigned long flags;
- bool fifo_merge;
int r;
mutex_lock(&apply_lock);
@@ -1531,22 +1432,7 @@ int dss_ovl_enable(struct omap_overlay *ovl)
goto err2;
}
- /* step 1: configure fifos/fifomerge for currently enabled ovls */
-
- fifo_merge = get_use_fifo_merge();
- dss_setup_fifos(fifo_merge);
- dss_apply_fifo_merge(fifo_merge);
-
- dss_write_regs();
- dss_set_go_bits();
-
- spin_unlock_irqrestore(&data_lock, flags);
-
- /* wait for fifo configs to go in */
- wait_pending_extra_info_updates();
-
- /* step 2: enable the overlay */
- spin_lock_irqsave(&data_lock, flags);
+ dss_setup_fifos();
op->enabling = false;
dss_apply_ovl_enable(ovl, true);
@@ -1556,9 +1442,6 @@ int dss_ovl_enable(struct omap_overlay *ovl)
spin_unlock_irqrestore(&data_lock, flags);
- /* wait for overlay to be enabled */
- wait_pending_extra_info_updates();
-
mutex_unlock(&apply_lock);
return 0;
@@ -1574,7 +1457,6 @@ int dss_ovl_disable(struct omap_overlay *ovl)
{
struct ovl_priv_data *op = get_ovl_priv(ovl);
unsigned long flags;
- bool fifo_merge;
int r;
mutex_lock(&apply_lock);
@@ -1589,34 +1471,14 @@ int dss_ovl_disable(struct omap_overlay *ovl)
goto err;
}
- /* step 1: disable the overlay */
spin_lock_irqsave(&data_lock, flags);
dss_apply_ovl_enable(ovl, false);
-
dss_write_regs();
dss_set_go_bits();
spin_unlock_irqrestore(&data_lock, flags);
- /* wait for the overlay to be disabled */
- wait_pending_extra_info_updates();
-
- /* step 2: configure fifos/fifomerge */
- spin_lock_irqsave(&data_lock, flags);
-
- fifo_merge = get_use_fifo_merge();
- dss_setup_fifos(fifo_merge);
- dss_apply_fifo_merge(fifo_merge);
-
- dss_write_regs();
- dss_set_go_bits();
-
- spin_unlock_irqrestore(&data_lock, flags);
-
- /* wait for fifo config to go in */
- wait_pending_extra_info_updates();
-
mutex_unlock(&apply_lock);
return 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 13/17] Revert "OMAPDSS: APPLY: add fifo-merge support"
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
This reverts commit 1d71f42b35ed66d90a9a39bc515bb16cfe2d4a46.
Adding fifo merge feature as an omapdss internal configuration was a
mistake. We cannot hide from the users of omapdss the complexities of
fifo merge.
This commit removes the fifo merge support, which luckily is easily done
as it was handled totally inside apply.c.
The plan is to try fifo merge again later when it is more clear how the
hardware acts in various situations, and how the omapdrm wants to use
fifo merge.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 154 ++-------------------------------------
1 file changed, 8 insertions(+), 146 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 1b49019..02943a5 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -993,11 +993,11 @@ static void dss_apply_fifo_merge(bool use_fifo_merge)
dss_data.fifo_merge_dirty = true;
}
-static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
- bool use_fifo_merge)
+static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
{
struct ovl_priv_data *op = get_ovl_priv(ovl);
u32 fifo_low, fifo_high;
+ bool use_fifo_merge = false;
if (!op->enabled && !op->enabling)
return;
@@ -1008,8 +1008,7 @@ static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
dss_apply_ovl_fifo_thresholds(ovl, fifo_low, fifo_high);
}
-static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr,
- bool use_fifo_merge)
+static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr)
{
struct omap_overlay *ovl;
struct mgr_priv_data *mp;
@@ -1020,10 +1019,10 @@ static void dss_mgr_setup_fifos(struct omap_overlay_manager *mgr,
return;
list_for_each_entry(ovl, &mgr->overlays, list)
- dss_ovl_setup_fifo(ovl, use_fifo_merge);
+ dss_ovl_setup_fifo(ovl);
}
-static void dss_setup_fifos(bool use_fifo_merge)
+static void dss_setup_fifos(void)
{
const int num_mgrs = omap_dss_get_num_overlay_managers();
struct omap_overlay_manager *mgr;
@@ -1031,91 +1030,15 @@ static void dss_setup_fifos(bool use_fifo_merge)
for (i = 0; i < num_mgrs; ++i) {
mgr = omap_dss_get_overlay_manager(i);
- dss_mgr_setup_fifos(mgr, use_fifo_merge);
+ dss_mgr_setup_fifos(mgr);
}
}
-static int get_num_used_managers(void)
-{
- const int num_mgrs = omap_dss_get_num_overlay_managers();
- struct omap_overlay_manager *mgr;
- struct mgr_priv_data *mp;
- int i;
- int enabled_mgrs;
-
- enabled_mgrs = 0;
-
- for (i = 0; i < num_mgrs; ++i) {
- mgr = omap_dss_get_overlay_manager(i);
- mp = get_mgr_priv(mgr);
-
- if (!mp->enabled)
- continue;
-
- enabled_mgrs++;
- }
-
- return enabled_mgrs;
-}
-
-static int get_num_used_overlays(void)
-{
- const int num_ovls = omap_dss_get_num_overlays();
- struct omap_overlay *ovl;
- struct ovl_priv_data *op;
- struct mgr_priv_data *mp;
- int i;
- int enabled_ovls;
-
- enabled_ovls = 0;
-
- for (i = 0; i < num_ovls; ++i) {
- ovl = omap_dss_get_overlay(i);
- op = get_ovl_priv(ovl);
-
- if (!op->enabled && !op->enabling)
- continue;
-
- mp = get_mgr_priv(ovl->manager);
-
- if (!mp->enabled)
- continue;
-
- enabled_ovls++;
- }
-
- return enabled_ovls;
-}
-
-static bool get_use_fifo_merge(void)
-{
- int enabled_mgrs = get_num_used_managers();
- int enabled_ovls = get_num_used_overlays();
-
- if (!dss_has_feature(FEAT_FIFO_MERGE))
- return false;
-
- /*
- * In theory the only requirement for fifomerge is enabled_ovls <= 1.
- * However, if we have two managers enabled and set/unset the fifomerge,
- * we need to set the GO bits in particular sequence for the managers,
- * and wait in between.
- *
- * This is rather difficult as new apply calls can happen at any time,
- * so we simplify the problem by requiring also that enabled_mgrs <= 1.
- * In practice this shouldn't matter, because when only one overlay is
- * enabled, most likely only one output is enabled.
- */
-
- return enabled_mgrs <= 1 && enabled_ovls <= 1;
-}
-
int dss_mgr_enable(struct omap_overlay_manager *mgr)
{
struct mgr_priv_data *mp = get_mgr_priv(mgr);
unsigned long flags;
int r;
- bool fifo_merge;
mutex_lock(&apply_lock);
@@ -1133,23 +1056,11 @@ int dss_mgr_enable(struct omap_overlay_manager *mgr)
goto err;
}
- /* step 1: setup fifos/fifomerge before enabling the manager */
-
- fifo_merge = get_use_fifo_merge();
- dss_setup_fifos(fifo_merge);
- dss_apply_fifo_merge(fifo_merge);
+ dss_setup_fifos();
dss_write_regs();
dss_set_go_bits();
- spin_unlock_irqrestore(&data_lock, flags);
-
- /* wait until fifo config is in */
- wait_pending_extra_info_updates();
-
- /* step 2: enable the manager */
- spin_lock_irqsave(&data_lock, flags);
-
if (!mgr_manual_update(mgr))
mp->updating = true;
@@ -1174,7 +1085,6 @@ void dss_mgr_disable(struct omap_overlay_manager *mgr)
{
struct mgr_priv_data *mp = get_mgr_priv(mgr);
unsigned long flags;
- bool fifo_merge;
mutex_lock(&apply_lock);
@@ -1189,16 +1099,8 @@ void dss_mgr_disable(struct omap_overlay_manager *mgr)
mp->updating = false;
mp->enabled = false;
- fifo_merge = get_use_fifo_merge();
- dss_setup_fifos(fifo_merge);
- dss_apply_fifo_merge(fifo_merge);
-
- dss_write_regs();
- dss_set_go_bits();
-
spin_unlock_irqrestore(&data_lock, flags);
- wait_pending_extra_info_updates();
out:
mutex_unlock(&apply_lock);
}
@@ -1505,7 +1407,6 @@ int dss_ovl_enable(struct omap_overlay *ovl)
{
struct ovl_priv_data *op = get_ovl_priv(ovl);
unsigned long flags;
- bool fifo_merge;
int r;
mutex_lock(&apply_lock);
@@ -1531,22 +1432,7 @@ int dss_ovl_enable(struct omap_overlay *ovl)
goto err2;
}
- /* step 1: configure fifos/fifomerge for currently enabled ovls */
-
- fifo_merge = get_use_fifo_merge();
- dss_setup_fifos(fifo_merge);
- dss_apply_fifo_merge(fifo_merge);
-
- dss_write_regs();
- dss_set_go_bits();
-
- spin_unlock_irqrestore(&data_lock, flags);
-
- /* wait for fifo configs to go in */
- wait_pending_extra_info_updates();
-
- /* step 2: enable the overlay */
- spin_lock_irqsave(&data_lock, flags);
+ dss_setup_fifos();
op->enabling = false;
dss_apply_ovl_enable(ovl, true);
@@ -1556,9 +1442,6 @@ int dss_ovl_enable(struct omap_overlay *ovl)
spin_unlock_irqrestore(&data_lock, flags);
- /* wait for overlay to be enabled */
- wait_pending_extra_info_updates();
-
mutex_unlock(&apply_lock);
return 0;
@@ -1574,7 +1457,6 @@ int dss_ovl_disable(struct omap_overlay *ovl)
{
struct ovl_priv_data *op = get_ovl_priv(ovl);
unsigned long flags;
- bool fifo_merge;
int r;
mutex_lock(&apply_lock);
@@ -1589,34 +1471,14 @@ int dss_ovl_disable(struct omap_overlay *ovl)
goto err;
}
- /* step 1: disable the overlay */
spin_lock_irqsave(&data_lock, flags);
dss_apply_ovl_enable(ovl, false);
-
dss_write_regs();
dss_set_go_bits();
spin_unlock_irqrestore(&data_lock, flags);
- /* wait for the overlay to be disabled */
- wait_pending_extra_info_updates();
-
- /* step 2: configure fifos/fifomerge */
- spin_lock_irqsave(&data_lock, flags);
-
- fifo_merge = get_use_fifo_merge();
- dss_setup_fifos(fifo_merge);
- dss_apply_fifo_merge(fifo_merge);
-
- dss_write_regs();
- dss_set_go_bits();
-
- spin_unlock_irqrestore(&data_lock, flags);
-
- /* wait for fifo config to go in */
- wait_pending_extra_info_updates();
-
mutex_unlock(&apply_lock);
return 0;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 14/17] Revert "OMAPDSS: APPLY: add fifo merge support funcs"
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
This reverts commit fb0119742291b6f30cd97026ee137b2d3d1f4de8.
Adding fifo merge feature as an omapdss internal configuration was a
mistake. We cannot hide from the users of omapdss the complexities of
fifo merge.
The previous commit removed fifo merge itself, and this removes the
remaining fifo merge support functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 43 ---------------------------------------
1 file changed, 43 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 02943a5..32b5379 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -111,9 +111,6 @@ static struct {
struct ovl_priv_data ovl_priv_data_array[MAX_DSS_OVERLAYS];
struct mgr_priv_data mgr_priv_data_array[MAX_DSS_MANAGERS];
- bool fifo_merge_dirty;
- bool fifo_merge;
-
bool irq_enabled;
} dss_data;
@@ -677,40 +674,11 @@ static void dss_mgr_write_regs_extra(struct omap_overlay_manager *mgr)
mp->shadow_extra_info_dirty = true;
}
-static void dss_write_regs_common(void)
-{
- const int num_mgrs = omap_dss_get_num_overlay_managers();
- int i;
-
- if (!dss_data.fifo_merge_dirty)
- return;
-
- for (i = 0; i < num_mgrs; ++i) {
- struct omap_overlay_manager *mgr;
- struct mgr_priv_data *mp;
-
- mgr = omap_dss_get_overlay_manager(i);
- mp = get_mgr_priv(mgr);
-
- if (mp->enabled) {
- if (dss_data.fifo_merge_dirty) {
- dispc_enable_fifomerge(dss_data.fifo_merge);
- dss_data.fifo_merge_dirty = false;
- }
-
- if (mp->updating)
- mp->shadow_info_dirty = true;
- }
- }
-}
-
static void dss_write_regs(void)
{
const int num_mgrs = omap_dss_get_num_overlay_managers();
int i;
- dss_write_regs_common();
-
for (i = 0; i < num_mgrs; ++i) {
struct omap_overlay_manager *mgr;
struct mgr_priv_data *mp;
@@ -799,8 +767,6 @@ void dss_mgr_start_update(struct omap_overlay_manager *mgr)
dss_mgr_write_regs(mgr);
dss_mgr_write_regs_extra(mgr);
- dss_write_regs_common();
-
mp->updating = true;
if (!dss_data.irq_enabled && need_isr())
@@ -984,15 +950,6 @@ static void dss_apply_ovl_fifo_thresholds(struct omap_overlay *ovl,
op->extra_info_dirty = true;
}
-static void dss_apply_fifo_merge(bool use_fifo_merge)
-{
- if (dss_data.fifo_merge = use_fifo_merge)
- return;
-
- dss_data.fifo_merge = use_fifo_merge;
- dss_data.fifo_merge_dirty = true;
-}
-
static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
{
struct ovl_priv_data *op = get_ovl_priv(ovl);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 14/17] Revert "OMAPDSS: APPLY: add fifo merge support funcs"
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
This reverts commit fb0119742291b6f30cd97026ee137b2d3d1f4de8.
Adding fifo merge feature as an omapdss internal configuration was a
mistake. We cannot hide from the users of omapdss the complexities of
fifo merge.
The previous commit removed fifo merge itself, and this removes the
remaining fifo merge support functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 43 ---------------------------------------
1 file changed, 43 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 02943a5..32b5379 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -111,9 +111,6 @@ static struct {
struct ovl_priv_data ovl_priv_data_array[MAX_DSS_OVERLAYS];
struct mgr_priv_data mgr_priv_data_array[MAX_DSS_MANAGERS];
- bool fifo_merge_dirty;
- bool fifo_merge;
-
bool irq_enabled;
} dss_data;
@@ -677,40 +674,11 @@ static void dss_mgr_write_regs_extra(struct omap_overlay_manager *mgr)
mp->shadow_extra_info_dirty = true;
}
-static void dss_write_regs_common(void)
-{
- const int num_mgrs = omap_dss_get_num_overlay_managers();
- int i;
-
- if (!dss_data.fifo_merge_dirty)
- return;
-
- for (i = 0; i < num_mgrs; ++i) {
- struct omap_overlay_manager *mgr;
- struct mgr_priv_data *mp;
-
- mgr = omap_dss_get_overlay_manager(i);
- mp = get_mgr_priv(mgr);
-
- if (mp->enabled) {
- if (dss_data.fifo_merge_dirty) {
- dispc_enable_fifomerge(dss_data.fifo_merge);
- dss_data.fifo_merge_dirty = false;
- }
-
- if (mp->updating)
- mp->shadow_info_dirty = true;
- }
- }
-}
-
static void dss_write_regs(void)
{
const int num_mgrs = omap_dss_get_num_overlay_managers();
int i;
- dss_write_regs_common();
-
for (i = 0; i < num_mgrs; ++i) {
struct omap_overlay_manager *mgr;
struct mgr_priv_data *mp;
@@ -799,8 +767,6 @@ void dss_mgr_start_update(struct omap_overlay_manager *mgr)
dss_mgr_write_regs(mgr);
dss_mgr_write_regs_extra(mgr);
- dss_write_regs_common();
-
mp->updating = true;
if (!dss_data.irq_enabled && need_isr())
@@ -984,15 +950,6 @@ static void dss_apply_ovl_fifo_thresholds(struct omap_overlay *ovl,
op->extra_info_dirty = true;
}
-static void dss_apply_fifo_merge(bool use_fifo_merge)
-{
- if (dss_data.fifo_merge == use_fifo_merge)
- return;
-
- dss_data.fifo_merge = use_fifo_merge;
- dss_data.fifo_merge_dirty = true;
-}
-
static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
{
struct ovl_priv_data *op = get_ovl_priv(ovl);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 15/17] OMAPDSS: remove extra_info completion code
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Now that fifo merge has been removed, nobody uses the extra_info related
completion code, which can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 69 ---------------------------------------
1 file changed, 69 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 32b5379..2579d15 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -118,7 +118,6 @@ static struct {
static spinlock_t data_lock;
/* lock for blocking functions */
static DEFINE_MUTEX(apply_lock);
-static DECLARE_COMPLETION(extra_updated_completion);
static void dss_register_vsync_isr(void);
@@ -355,69 +354,6 @@ static bool need_go(struct omap_overlay_manager *mgr)
return false;
}
-/* returns true if an extra_info field is currently being updated */
-static bool extra_info_update_ongoing(void)
-{
- const int num_mgrs = dss_feat_get_num_mgrs();
- int i;
-
- for (i = 0; i < num_mgrs; ++i) {
- struct omap_overlay_manager *mgr;
- struct omap_overlay *ovl;
- struct mgr_priv_data *mp;
-
- mgr = omap_dss_get_overlay_manager(i);
- mp = get_mgr_priv(mgr);
-
- if (!mp->enabled)
- continue;
-
- if (!mp->updating)
- continue;
-
- if (mp->extra_info_dirty || mp->shadow_extra_info_dirty)
- return true;
-
- list_for_each_entry(ovl, &mgr->overlays, list) {
- struct ovl_priv_data *op = get_ovl_priv(ovl);
-
- if (op->extra_info_dirty || op->shadow_extra_info_dirty)
- return true;
- }
- }
-
- return false;
-}
-
-/* wait until no extra_info updates are pending */
-static void wait_pending_extra_info_updates(void)
-{
- bool updating;
- unsigned long flags;
- unsigned long t;
- int r;
-
- spin_lock_irqsave(&data_lock, flags);
-
- updating = extra_info_update_ongoing();
-
- if (!updating) {
- spin_unlock_irqrestore(&data_lock, flags);
- return;
- }
-
- init_completion(&extra_updated_completion);
-
- spin_unlock_irqrestore(&data_lock, flags);
-
- t = msecs_to_jiffies(500);
- r = wait_for_completion_timeout(&extra_updated_completion, t);
- if (r = 0)
- DSSWARN("timeout in wait_pending_extra_info_updates\n");
- else if (r < 0)
- DSSERR("wait_pending_extra_info_updates failed: %d\n", r);
-}
-
int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
{
unsigned long timeout = msecs_to_jiffies(500);
@@ -823,7 +759,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
{
const int num_mgrs = dss_feat_get_num_mgrs();
int i;
- bool extra_updating;
spin_lock(&data_lock);
@@ -854,10 +789,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
dss_write_regs();
dss_set_go_bits();
- extra_updating = extra_info_update_ongoing();
- if (!extra_updating)
- complete_all(&extra_updated_completion);
-
if (!need_isr())
dss_unregister_vsync_isr();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 15/17] OMAPDSS: remove extra_info completion code
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
Now that fifo merge has been removed, nobody uses the extra_info related
completion code, which can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/apply.c | 69 ---------------------------------------
1 file changed, 69 deletions(-)
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
index 32b5379..2579d15 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/omap2/dss/apply.c
@@ -118,7 +118,6 @@ static struct {
static spinlock_t data_lock;
/* lock for blocking functions */
static DEFINE_MUTEX(apply_lock);
-static DECLARE_COMPLETION(extra_updated_completion);
static void dss_register_vsync_isr(void);
@@ -355,69 +354,6 @@ static bool need_go(struct omap_overlay_manager *mgr)
return false;
}
-/* returns true if an extra_info field is currently being updated */
-static bool extra_info_update_ongoing(void)
-{
- const int num_mgrs = dss_feat_get_num_mgrs();
- int i;
-
- for (i = 0; i < num_mgrs; ++i) {
- struct omap_overlay_manager *mgr;
- struct omap_overlay *ovl;
- struct mgr_priv_data *mp;
-
- mgr = omap_dss_get_overlay_manager(i);
- mp = get_mgr_priv(mgr);
-
- if (!mp->enabled)
- continue;
-
- if (!mp->updating)
- continue;
-
- if (mp->extra_info_dirty || mp->shadow_extra_info_dirty)
- return true;
-
- list_for_each_entry(ovl, &mgr->overlays, list) {
- struct ovl_priv_data *op = get_ovl_priv(ovl);
-
- if (op->extra_info_dirty || op->shadow_extra_info_dirty)
- return true;
- }
- }
-
- return false;
-}
-
-/* wait until no extra_info updates are pending */
-static void wait_pending_extra_info_updates(void)
-{
- bool updating;
- unsigned long flags;
- unsigned long t;
- int r;
-
- spin_lock_irqsave(&data_lock, flags);
-
- updating = extra_info_update_ongoing();
-
- if (!updating) {
- spin_unlock_irqrestore(&data_lock, flags);
- return;
- }
-
- init_completion(&extra_updated_completion);
-
- spin_unlock_irqrestore(&data_lock, flags);
-
- t = msecs_to_jiffies(500);
- r = wait_for_completion_timeout(&extra_updated_completion, t);
- if (r == 0)
- DSSWARN("timeout in wait_pending_extra_info_updates\n");
- else if (r < 0)
- DSSERR("wait_pending_extra_info_updates failed: %d\n", r);
-}
-
int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
{
unsigned long timeout = msecs_to_jiffies(500);
@@ -823,7 +759,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
{
const int num_mgrs = dss_feat_get_num_mgrs();
int i;
- bool extra_updating;
spin_lock(&data_lock);
@@ -854,10 +789,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
dss_write_regs();
dss_set_go_bits();
- extra_updating = extra_info_update_ongoing();
- if (!extra_updating)
- complete_all(&extra_updated_completion);
-
if (!need_isr())
dss_unregister_vsync_isr();
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 16/17] OMAPDSS: Improve fifo management code
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
OMAP4+ allows assigning the overlay FIFOs freely, but that is not
supported by omapdss yet. This patch takes a step forward by improving
the fifo management to be more flexible.
dispc.c is changed to keep track of the sizes of each fifo, and also the
overlay using each fifo.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 39 +++++++++++++++++++++++++++++++--------
1 file changed, 31 insertions(+), 8 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e934abb..dc0f372 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -94,8 +94,11 @@ struct dispc_features {
u16 pos_x, unsigned long *core_clk);
unsigned long (*calc_core_clk) (enum omap_channel channel,
u16 width, u16 height, u16 out_width, u16 out_height);
+ u8 num_fifos;
};
+#define DISPC_MAX_NR_FIFOS 5
+
static struct {
struct platform_device *pdev;
void __iomem *base;
@@ -105,7 +108,9 @@ static struct {
int irq;
struct clk *dss_clk;
- u32 fifo_size[MAX_DSS_OVERLAYS];
+ u32 fifo_size[DISPC_MAX_NR_FIFOS];
+ /* maps which plane is using a fifo. fifo-id -> plane-id */
+ int fifo_assignment[DISPC_MAX_NR_FIFOS];
spinlock_t irq_lock;
u32 irq_error_mask;
@@ -1061,10 +1066,10 @@ static void dispc_mgr_set_size(enum omap_channel channel, u16 width,
dispc_write_reg(DISPC_SIZE_MGR(channel), val);
}
-static void dispc_read_plane_fifo_sizes(void)
+static void dispc_init_fifos(void)
{
u32 size;
- int plane;
+ int fifo;
u8 start, end;
u32 unit;
@@ -1072,16 +1077,30 @@ static void dispc_read_plane_fifo_sizes(void)
dss_feat_get_reg_field(FEAT_REG_FIFOSIZE, &start, &end);
- for (plane = 0; plane < dss_feat_get_num_ovls(); ++plane) {
- size = REG_GET(DISPC_OVL_FIFO_SIZE_STATUS(plane), start, end);
+ for (fifo = 0; fifo < dispc.feat->num_fifos; ++fifo) {
+ size = REG_GET(DISPC_OVL_FIFO_SIZE_STATUS(fifo), start, end);
size *= unit;
- dispc.fifo_size[plane] = size;
+ dispc.fifo_size[fifo] = size;
+
+ /*
+ * By default fifos are mapped directly to overlays, fifo 0 to
+ * ovl 0, fifo 1 to ovl 1, etc.
+ */
+ dispc.fifo_assignment[fifo] = fifo;
}
}
static u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
{
- return dispc.fifo_size[plane];
+ int fifo;
+ u32 size = 0;
+
+ for (fifo = 0; fifo < dispc.feat->num_fifos; ++fifo) {
+ if (dispc.fifo_assignment[fifo] = plane)
+ size += dispc.fifo_size[fifo];
+ }
+
+ return size;
}
void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high)
@@ -3708,7 +3727,7 @@ static void _omap_dispc_initial_config(void)
dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
- dispc_read_plane_fifo_sizes();
+ dispc_init_fifos();
dispc_configure_burst_sizes();
@@ -3724,6 +3743,7 @@ static const struct dispc_features omap24xx_dispc_feats __initconst = {
.hp_max = 256,
.calc_scaling = dispc_ovl_calc_scaling_24xx,
.calc_core_clk = calc_core_clk_24xx,
+ .num_fifos = 3,
};
static const struct dispc_features omap34xx_rev1_0_dispc_feats __initconst = {
@@ -3735,6 +3755,7 @@ static const struct dispc_features omap34xx_rev1_0_dispc_feats __initconst = {
.hp_max = 256,
.calc_scaling = dispc_ovl_calc_scaling_34xx,
.calc_core_clk = calc_core_clk_34xx,
+ .num_fifos = 3,
};
static const struct dispc_features omap34xx_rev3_0_dispc_feats __initconst = {
@@ -3746,6 +3767,7 @@ static const struct dispc_features omap34xx_rev3_0_dispc_feats __initconst = {
.hp_max = 4096,
.calc_scaling = dispc_ovl_calc_scaling_34xx,
.calc_core_clk = calc_core_clk_34xx,
+ .num_fifos = 3,
};
static const struct dispc_features omap44xx_dispc_feats __initconst = {
@@ -3757,6 +3779,7 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
.hp_max = 4096,
.calc_scaling = dispc_ovl_calc_scaling_44xx,
.calc_core_clk = calc_core_clk_44xx,
+ .num_fifos = 5,
};
static int __init dispc_init_features(struct device *dev)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 16/17] OMAPDSS: Improve fifo management code
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
OMAP4+ allows assigning the overlay FIFOs freely, but that is not
supported by omapdss yet. This patch takes a step forward by improving
the fifo management to be more flexible.
dispc.c is changed to keep track of the sizes of each fifo, and also the
overlay using each fifo.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 39 +++++++++++++++++++++++++++++++--------
1 file changed, 31 insertions(+), 8 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e934abb..dc0f372 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -94,8 +94,11 @@ struct dispc_features {
u16 pos_x, unsigned long *core_clk);
unsigned long (*calc_core_clk) (enum omap_channel channel,
u16 width, u16 height, u16 out_width, u16 out_height);
+ u8 num_fifos;
};
+#define DISPC_MAX_NR_FIFOS 5
+
static struct {
struct platform_device *pdev;
void __iomem *base;
@@ -105,7 +108,9 @@ static struct {
int irq;
struct clk *dss_clk;
- u32 fifo_size[MAX_DSS_OVERLAYS];
+ u32 fifo_size[DISPC_MAX_NR_FIFOS];
+ /* maps which plane is using a fifo. fifo-id -> plane-id */
+ int fifo_assignment[DISPC_MAX_NR_FIFOS];
spinlock_t irq_lock;
u32 irq_error_mask;
@@ -1061,10 +1066,10 @@ static void dispc_mgr_set_size(enum omap_channel channel, u16 width,
dispc_write_reg(DISPC_SIZE_MGR(channel), val);
}
-static void dispc_read_plane_fifo_sizes(void)
+static void dispc_init_fifos(void)
{
u32 size;
- int plane;
+ int fifo;
u8 start, end;
u32 unit;
@@ -1072,16 +1077,30 @@ static void dispc_read_plane_fifo_sizes(void)
dss_feat_get_reg_field(FEAT_REG_FIFOSIZE, &start, &end);
- for (plane = 0; plane < dss_feat_get_num_ovls(); ++plane) {
- size = REG_GET(DISPC_OVL_FIFO_SIZE_STATUS(plane), start, end);
+ for (fifo = 0; fifo < dispc.feat->num_fifos; ++fifo) {
+ size = REG_GET(DISPC_OVL_FIFO_SIZE_STATUS(fifo), start, end);
size *= unit;
- dispc.fifo_size[plane] = size;
+ dispc.fifo_size[fifo] = size;
+
+ /*
+ * By default fifos are mapped directly to overlays, fifo 0 to
+ * ovl 0, fifo 1 to ovl 1, etc.
+ */
+ dispc.fifo_assignment[fifo] = fifo;
}
}
static u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
{
- return dispc.fifo_size[plane];
+ int fifo;
+ u32 size = 0;
+
+ for (fifo = 0; fifo < dispc.feat->num_fifos; ++fifo) {
+ if (dispc.fifo_assignment[fifo] == plane)
+ size += dispc.fifo_size[fifo];
+ }
+
+ return size;
}
void dispc_ovl_set_fifo_threshold(enum omap_plane plane, u32 low, u32 high)
@@ -3708,7 +3727,7 @@ static void _omap_dispc_initial_config(void)
dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
- dispc_read_plane_fifo_sizes();
+ dispc_init_fifos();
dispc_configure_burst_sizes();
@@ -3724,6 +3743,7 @@ static const struct dispc_features omap24xx_dispc_feats __initconst = {
.hp_max = 256,
.calc_scaling = dispc_ovl_calc_scaling_24xx,
.calc_core_clk = calc_core_clk_24xx,
+ .num_fifos = 3,
};
static const struct dispc_features omap34xx_rev1_0_dispc_feats __initconst = {
@@ -3735,6 +3755,7 @@ static const struct dispc_features omap34xx_rev1_0_dispc_feats __initconst = {
.hp_max = 256,
.calc_scaling = dispc_ovl_calc_scaling_34xx,
.calc_core_clk = calc_core_clk_34xx,
+ .num_fifos = 3,
};
static const struct dispc_features omap34xx_rev3_0_dispc_feats __initconst = {
@@ -3746,6 +3767,7 @@ static const struct dispc_features omap34xx_rev3_0_dispc_feats __initconst = {
.hp_max = 4096,
.calc_scaling = dispc_ovl_calc_scaling_34xx,
.calc_core_clk = calc_core_clk_34xx,
+ .num_fifos = 3,
};
static const struct dispc_features omap44xx_dispc_feats __initconst = {
@@ -3757,6 +3779,7 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
.hp_max = 4096,
.calc_scaling = dispc_ovl_calc_scaling_44xx,
.calc_core_clk = calc_core_clk_44xx,
+ .num_fifos = 5,
};
static int __init dispc_init_features(struct device *dev)
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 17/17] OMAPDSS: Use WB fifo for GFX overlay
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 8:25 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
OMAP4's GFX overlay has smaller fifo than the rest of the overlays
(including writeback "overlay"). This seems to be the reason for
underflows in some more demanding scenarios.
We can avoid the problems by using the WB fifo for GFX overlay, and vice
versa. WB usage is not supported yet, but when it will, it should
perform just fine with smaller fifo as there are no hard realtime
constraints with WB.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 27 +++++++++++++++++++++++++++
drivers/video/omap2/dss/dispc.h | 4 ++++
include/video/omapdss.h | 1 +
3 files changed, 32 insertions(+)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index dc0f372..d512c38 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -95,6 +95,9 @@ struct dispc_features {
unsigned long (*calc_core_clk) (enum omap_channel channel,
u16 width, u16 height, u16 out_width, u16 out_height);
u8 num_fifos;
+
+ /* swap GFX & WB fifos */
+ bool gfx_fifo_workaround:1;
};
#define DISPC_MAX_NR_FIFOS 5
@@ -1088,6 +1091,29 @@ static void dispc_init_fifos(void)
*/
dispc.fifo_assignment[fifo] = fifo;
}
+
+ /*
+ * The GFX fifo on OMAP4 is smaller than the other fifos. The small fifo
+ * causes problems with certain use cases, like using the tiler in 2D
+ * mode. The below hack swaps the fifos of GFX and WB planes, thus
+ * giving GFX plane a larger fifo. WB but should work fine with a
+ * smaller fifo.
+ */
+ if (dispc.feat->gfx_fifo_workaround) {
+ u32 v;
+
+ v = dispc_read_reg(DISPC_GLOBAL_BUFFER);
+
+ v = FLD_MOD(v, 4, 2, 0); /* GFX BUF top to WB */
+ v = FLD_MOD(v, 4, 5, 3); /* GFX BUF bottom to WB */
+ v = FLD_MOD(v, 0, 26, 24); /* WB BUF top to GFX */
+ v = FLD_MOD(v, 0, 29, 27); /* WB BUF bottom to GFX */
+
+ dispc_write_reg(DISPC_GLOBAL_BUFFER, v);
+
+ dispc.fifo_assignment[OMAP_DSS_GFX] = OMAP_DSS_WB;
+ dispc.fifo_assignment[OMAP_DSS_WB] = OMAP_DSS_GFX;
+ }
}
static u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
@@ -3780,6 +3806,7 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
.calc_scaling = dispc_ovl_calc_scaling_44xx,
.calc_core_clk = calc_core_clk_44xx,
.num_fifos = 5,
+ .gfx_fifo_workaround = true,
};
static int __init dispc_init_features(struct device *dev)
diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/omap2/dss/dispc.h
index 92d8a9b..42e56cc 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/omap2/dss/dispc.h
@@ -36,6 +36,7 @@
#define DISPC_CONTROL2 0x0238
#define DISPC_CONFIG2 0x0620
#define DISPC_DIVISOR 0x0804
+#define DISPC_GLOBAL_BUFFER 0x0800
#define DISPC_CONTROL3 0x0848
#define DISPC_CONFIG3 0x084C
@@ -355,6 +356,8 @@ static inline u16 DISPC_OVL_BASE(enum omap_plane plane)
return 0x014C;
case OMAP_DSS_VIDEO3:
return 0x0300;
+ case OMAP_DSS_WB:
+ return 0x0500;
default:
BUG();
return 0;
@@ -517,6 +520,7 @@ static inline u16 DISPC_FIFO_SIZE_STATUS_OFFSET(enum omap_plane plane)
case OMAP_DSS_VIDEO2:
return 0x0018;
case OMAP_DSS_VIDEO3:
+ case OMAP_DSS_WB:
return 0x0088;
default:
BUG();
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 24a7fa1..ac2e4cc 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -73,6 +73,7 @@ enum omap_plane {
OMAP_DSS_VIDEO1 = 1,
OMAP_DSS_VIDEO2 = 2,
OMAP_DSS_VIDEO3 = 3,
+ OMAP_DSS_WB = 4,
};
enum omap_channel {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* [PATCH 17/17] OMAPDSS: Use WB fifo for GFX overlay
@ 2012-09-05 8:25 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 8:25 UTC (permalink / raw)
To: linux-omap, linux-fbdev, archit; +Cc: Tomi Valkeinen
OMAP4's GFX overlay has smaller fifo than the rest of the overlays
(including writeback "overlay"). This seems to be the reason for
underflows in some more demanding scenarios.
We can avoid the problems by using the WB fifo for GFX overlay, and vice
versa. WB usage is not supported yet, but when it will, it should
perform just fine with smaller fifo as there are no hard realtime
constraints with WB.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
drivers/video/omap2/dss/dispc.c | 27 +++++++++++++++++++++++++++
drivers/video/omap2/dss/dispc.h | 4 ++++
include/video/omapdss.h | 1 +
3 files changed, 32 insertions(+)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index dc0f372..d512c38 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -95,6 +95,9 @@ struct dispc_features {
unsigned long (*calc_core_clk) (enum omap_channel channel,
u16 width, u16 height, u16 out_width, u16 out_height);
u8 num_fifos;
+
+ /* swap GFX & WB fifos */
+ bool gfx_fifo_workaround:1;
};
#define DISPC_MAX_NR_FIFOS 5
@@ -1088,6 +1091,29 @@ static void dispc_init_fifos(void)
*/
dispc.fifo_assignment[fifo] = fifo;
}
+
+ /*
+ * The GFX fifo on OMAP4 is smaller than the other fifos. The small fifo
+ * causes problems with certain use cases, like using the tiler in 2D
+ * mode. The below hack swaps the fifos of GFX and WB planes, thus
+ * giving GFX plane a larger fifo. WB but should work fine with a
+ * smaller fifo.
+ */
+ if (dispc.feat->gfx_fifo_workaround) {
+ u32 v;
+
+ v = dispc_read_reg(DISPC_GLOBAL_BUFFER);
+
+ v = FLD_MOD(v, 4, 2, 0); /* GFX BUF top to WB */
+ v = FLD_MOD(v, 4, 5, 3); /* GFX BUF bottom to WB */
+ v = FLD_MOD(v, 0, 26, 24); /* WB BUF top to GFX */
+ v = FLD_MOD(v, 0, 29, 27); /* WB BUF bottom to GFX */
+
+ dispc_write_reg(DISPC_GLOBAL_BUFFER, v);
+
+ dispc.fifo_assignment[OMAP_DSS_GFX] = OMAP_DSS_WB;
+ dispc.fifo_assignment[OMAP_DSS_WB] = OMAP_DSS_GFX;
+ }
}
static u32 dispc_ovl_get_fifo_size(enum omap_plane plane)
@@ -3780,6 +3806,7 @@ static const struct dispc_features omap44xx_dispc_feats __initconst = {
.calc_scaling = dispc_ovl_calc_scaling_44xx,
.calc_core_clk = calc_core_clk_44xx,
.num_fifos = 5,
+ .gfx_fifo_workaround = true,
};
static int __init dispc_init_features(struct device *dev)
diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/omap2/dss/dispc.h
index 92d8a9b..42e56cc 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/omap2/dss/dispc.h
@@ -36,6 +36,7 @@
#define DISPC_CONTROL2 0x0238
#define DISPC_CONFIG2 0x0620
#define DISPC_DIVISOR 0x0804
+#define DISPC_GLOBAL_BUFFER 0x0800
#define DISPC_CONTROL3 0x0848
#define DISPC_CONFIG3 0x084C
@@ -355,6 +356,8 @@ static inline u16 DISPC_OVL_BASE(enum omap_plane plane)
return 0x014C;
case OMAP_DSS_VIDEO3:
return 0x0300;
+ case OMAP_DSS_WB:
+ return 0x0500;
default:
BUG();
return 0;
@@ -517,6 +520,7 @@ static inline u16 DISPC_FIFO_SIZE_STATUS_OFFSET(enum omap_plane plane)
case OMAP_DSS_VIDEO2:
return 0x0018;
case OMAP_DSS_VIDEO3:
+ case OMAP_DSS_WB:
return 0x0088;
default:
BUG();
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 24a7fa1..ac2e4cc 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -73,6 +73,7 @@ enum omap_plane {
OMAP_DSS_VIDEO1 = 1,
OMAP_DSS_VIDEO2 = 2,
OMAP_DSS_VIDEO3 = 3,
+ OMAP_DSS_WB = 4,
};
enum omap_channel {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 9:27 ` Archit Taneja
-1 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 9:15 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> dss_mgr_set_timings() can only be called when the output is not active.
> This means that most of the code in the function is extra, as there's no
> need to write the values to registers, etc, because that will be handled
> when the output will be enabled.
We need to fix dpi_set_timings() before we can make this change. DPI
still tries to change timings on the fly, i.e, with manager enabled. We
need to disable and enable the DPI output like we do for other outputs.
Archit
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/apply.c | 18 ++++++++----------
> 1 file changed, 8 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 53629dd..1b49019 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
> const struct omap_video_timings *timings)
> {
> unsigned long flags;
> -
> - mutex_lock(&apply_lock);
> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>
> spin_lock_irqsave(&data_lock, flags);
>
> - dss_apply_mgr_timings(mgr, timings);
> -
> - dss_write_regs();
> - dss_set_go_bits();
> + if (mp->enabled) {
> + DSSERR("cannot set timings for %s: manager needs to be disabled\n",
> + mgr->name);
> + goto out;
> + }
>
> + dss_apply_mgr_timings(mgr, timings);
> +out:
> spin_unlock_irqrestore(&data_lock, flags);
> -
> - wait_pending_extra_info_updates();
> -
> - mutex_unlock(&apply_lock);
> }
>
> static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
>
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
@ 2012-09-05 9:27 ` Archit Taneja
0 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 9:27 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> dss_mgr_set_timings() can only be called when the output is not active.
> This means that most of the code in the function is extra, as there's no
> need to write the values to registers, etc, because that will be handled
> when the output will be enabled.
We need to fix dpi_set_timings() before we can make this change. DPI
still tries to change timings on the fly, i.e, with manager enabled. We
need to disable and enable the DPI output like we do for other outputs.
Archit
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/apply.c | 18 ++++++++----------
> 1 file changed, 8 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 53629dd..1b49019 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
> const struct omap_video_timings *timings)
> {
> unsigned long flags;
> -
> - mutex_lock(&apply_lock);
> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>
> spin_lock_irqsave(&data_lock, flags);
>
> - dss_apply_mgr_timings(mgr, timings);
> -
> - dss_write_regs();
> - dss_set_go_bits();
> + if (mp->enabled) {
> + DSSERR("cannot set timings for %s: manager needs to be disabled\n",
> + mgr->name);
> + goto out;
> + }
>
> + dss_apply_mgr_timings(mgr, timings);
> +out:
> spin_unlock_irqrestore(&data_lock, flags);
> -
> - wait_pending_extra_info_updates();
> -
> - mutex_unlock(&apply_lock);
> }
>
> static void dss_apply_mgr_lcd_config(struct omap_overlay_manager *mgr,
>
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
2012-09-05 9:27 ` Archit Taneja
@ 2012-09-05 10:41 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 10:41 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1179 bytes --]
On Wed, 2012-09-05 at 14:45 +0530, Archit Taneja wrote:
> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> > dss_mgr_set_timings() can only be called when the output is not active.
> > This means that most of the code in the function is extra, as there's no
> > need to write the values to registers, etc, because that will be handled
> > when the output will be enabled.
>
> We need to fix dpi_set_timings() before we can make this change. DPI
> still tries to change timings on the fly, i.e, with manager enabled. We
> need to disable and enable the DPI output like we do for other outputs.
Yep, and for HDMI also (I didn't check the others yet).
I think the simplest way to handle this is to only write the dpi.timings
in omapdss_dpi_set_timings, and remove the call to dss_mgr_set_timings.
This is not perfect, as a call to omapdss_dpi_set_timings when the
display is enabled would result in changing the dpi.timings, but the
changes wouldn't be actually in use.
However, there are only a few places where set_timings is called, and we
can make sure in those places to first disable the output and then
enable it again.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
@ 2012-09-05 10:41 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 10:41 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1179 bytes --]
On Wed, 2012-09-05 at 14:45 +0530, Archit Taneja wrote:
> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> > dss_mgr_set_timings() can only be called when the output is not active.
> > This means that most of the code in the function is extra, as there's no
> > need to write the values to registers, etc, because that will be handled
> > when the output will be enabled.
>
> We need to fix dpi_set_timings() before we can make this change. DPI
> still tries to change timings on the fly, i.e, with manager enabled. We
> need to disable and enable the DPI output like we do for other outputs.
Yep, and for HDMI also (I didn't check the others yet).
I think the simplest way to handle this is to only write the dpi.timings
in omapdss_dpi_set_timings, and remove the call to dss_mgr_set_timings.
This is not perfect, as a call to omapdss_dpi_set_timings when the
display is enabled would result in changing the dpi.timings, but the
changes wouldn't be actually in use.
However, there are only a few places where set_timings is called, and we
can make sure in those places to first disable the output and then
enable it again.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
2012-09-05 10:41 ` Tomi Valkeinen
@ 2012-09-05 11:46 ` Archit Taneja
-1 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 11:34 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 04:11 PM, Tomi Valkeinen wrote:
> On Wed, 2012-09-05 at 14:45 +0530, Archit Taneja wrote:
>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
>>> dss_mgr_set_timings() can only be called when the output is not active.
>>> This means that most of the code in the function is extra, as there's no
>>> need to write the values to registers, etc, because that will be handled
>>> when the output will be enabled.
>>
>> We need to fix dpi_set_timings() before we can make this change. DPI
>> still tries to change timings on the fly, i.e, with manager enabled. We
>> need to disable and enable the DPI output like we do for other outputs.
>
> Yep, and for HDMI also (I didn't check the others yet).
I don't think HDMI is impacted, we do the full power off and power on
for HDMI, so the manager would be disabled when we set the timings.
>
> I think the simplest way to handle this is to only write the dpi.timings
> in omapdss_dpi_set_timings, and remove the call to dss_mgr_set_timings.
> This is not perfect, as a call to omapdss_dpi_set_timings when the
> display is enabled would result in changing the dpi.timings, but the
> changes wouldn't be actually in use.
The simplest way would be to do what other outputs do, disable the
output and re-enable the output with the new timings value, if the panel
is enabled.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
2012-09-05 11:46 ` Archit Taneja
@ 2012-09-05 11:41 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 11:41 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 2122 bytes --]
On Wed, 2012-09-05 at 17:04 +0530, Archit Taneja wrote:
> On Wednesday 05 September 2012 04:11 PM, Tomi Valkeinen wrote:
> > On Wed, 2012-09-05 at 14:45 +0530, Archit Taneja wrote:
> >> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> >>> dss_mgr_set_timings() can only be called when the output is not active.
> >>> This means that most of the code in the function is extra, as there's no
> >>> need to write the values to registers, etc, because that will be handled
> >>> when the output will be enabled.
> >>
> >> We need to fix dpi_set_timings() before we can make this change. DPI
> >> still tries to change timings on the fly, i.e, with manager enabled. We
> >> need to disable and enable the DPI output like we do for other outputs.
> >
> > Yep, and for HDMI also (I didn't check the others yet).
>
> I don't think HDMI is impacted, we do the full power off and power on
> for HDMI, so the manager would be disabled when we set the timings.
Ah right.
> > I think the simplest way to handle this is to only write the dpi.timings
> > in omapdss_dpi_set_timings, and remove the call to dss_mgr_set_timings.
> > This is not perfect, as a call to omapdss_dpi_set_timings when the
> > display is enabled would result in changing the dpi.timings, but the
> > changes wouldn't be actually in use.
>
> The simplest way would be to do what other outputs do, disable the
> output and re-enable the output with the new timings value, if the panel
> is enabled.
Not quite, as there's the mutex in dpi so we can't call enable/disable
from set_timings. I could create separate non-locked internal functions
for enable and disable, but that feels more complex than just removing
the enable & disable from set_timings.
In the end we'll anyway only allow changing timings when the output is
disabled.
The only change I had to do, in addition to removing code from
set_timings functions, was to add display disable & enable calls to the
"timings" sysfs write. omapfb already only calls set_timings when the
output is disabled, and omapdrm does the same.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
@ 2012-09-05 11:41 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-05 11:41 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 2122 bytes --]
On Wed, 2012-09-05 at 17:04 +0530, Archit Taneja wrote:
> On Wednesday 05 September 2012 04:11 PM, Tomi Valkeinen wrote:
> > On Wed, 2012-09-05 at 14:45 +0530, Archit Taneja wrote:
> >> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> >>> dss_mgr_set_timings() can only be called when the output is not active.
> >>> This means that most of the code in the function is extra, as there's no
> >>> need to write the values to registers, etc, because that will be handled
> >>> when the output will be enabled.
> >>
> >> We need to fix dpi_set_timings() before we can make this change. DPI
> >> still tries to change timings on the fly, i.e, with manager enabled. We
> >> need to disable and enable the DPI output like we do for other outputs.
> >
> > Yep, and for HDMI also (I didn't check the others yet).
>
> I don't think HDMI is impacted, we do the full power off and power on
> for HDMI, so the manager would be disabled when we set the timings.
Ah right.
> > I think the simplest way to handle this is to only write the dpi.timings
> > in omapdss_dpi_set_timings, and remove the call to dss_mgr_set_timings.
> > This is not perfect, as a call to omapdss_dpi_set_timings when the
> > display is enabled would result in changing the dpi.timings, but the
> > changes wouldn't be actually in use.
>
> The simplest way would be to do what other outputs do, disable the
> output and re-enable the output with the new timings value, if the panel
> is enabled.
Not quite, as there's the mutex in dpi so we can't call enable/disable
from set_timings. I could create separate non-locked internal functions
for enable and disable, but that feels more complex than just removing
the enable & disable from set_timings.
In the end we'll anyway only allow changing timings when the output is
disabled.
The only change I had to do, in addition to removing code from
set_timings functions, was to add display disable & enable calls to the
"timings" sysfs write. omapfb already only calls set_timings when the
output is disabled, and omapdrm does the same.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
@ 2012-09-05 11:46 ` Archit Taneja
0 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 11:46 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 04:11 PM, Tomi Valkeinen wrote:
> On Wed, 2012-09-05 at 14:45 +0530, Archit Taneja wrote:
>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
>>> dss_mgr_set_timings() can only be called when the output is not active.
>>> This means that most of the code in the function is extra, as there's no
>>> need to write the values to registers, etc, because that will be handled
>>> when the output will be enabled.
>>
>> We need to fix dpi_set_timings() before we can make this change. DPI
>> still tries to change timings on the fly, i.e, with manager enabled. We
>> need to disable and enable the DPI output like we do for other outputs.
>
> Yep, and for HDMI also (I didn't check the others yet).
I don't think HDMI is impacted, we do the full power off and power on
for HDMI, so the manager would be disabled when we set the timings.
>
> I think the simplest way to handle this is to only write the dpi.timings
> in omapdss_dpi_set_timings, and remove the call to dss_mgr_set_timings.
> This is not perfect, as a call to omapdss_dpi_set_timings when the
> display is enabled would result in changing the dpi.timings, but the
> changes wouldn't be actually in use.
The simplest way would be to do what other outputs do, disable the
output and re-enable the output with the new timings value, if the panel
is enabled.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
2012-09-05 11:41 ` Tomi Valkeinen
@ 2012-09-05 11:48 ` Archit Taneja
-1 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 11:48 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 05:11 PM, Tomi Valkeinen wrote:
> On Wed, 2012-09-05 at 17:04 +0530, Archit Taneja wrote:
>> On Wednesday 05 September 2012 04:11 PM, Tomi Valkeinen wrote:
>>> On Wed, 2012-09-05 at 14:45 +0530, Archit Taneja wrote:
>>>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
>>>>> dss_mgr_set_timings() can only be called when the output is not active.
>>>>> This means that most of the code in the function is extra, as there's no
>>>>> need to write the values to registers, etc, because that will be handled
>>>>> when the output will be enabled.
>>>>
>>>> We need to fix dpi_set_timings() before we can make this change. DPI
>>>> still tries to change timings on the fly, i.e, with manager enabled. We
>>>> need to disable and enable the DPI output like we do for other outputs.
>>>
>>> Yep, and for HDMI also (I didn't check the others yet).
>>
>> I don't think HDMI is impacted, we do the full power off and power on
>> for HDMI, so the manager would be disabled when we set the timings.
>
> Ah right.
>
>>> I think the simplest way to handle this is to only write the dpi.timings
>>> in omapdss_dpi_set_timings, and remove the call to dss_mgr_set_timings.
>>> This is not perfect, as a call to omapdss_dpi_set_timings when the
>>> display is enabled would result in changing the dpi.timings, but the
>>> changes wouldn't be actually in use.
>>
>> The simplest way would be to do what other outputs do, disable the
>> output and re-enable the output with the new timings value, if the panel
>> is enabled.
>
> Not quite, as there's the mutex in dpi so we can't call enable/disable
> from set_timings. I could create separate non-locked internal functions
> for enable and disable, but that feels more complex than just removing
> the enable & disable from set_timings.
Okay, right.
>
> In the end we'll anyway only allow changing timings when the output is
> disabled.
>
> The only change I had to do, in addition to removing code from
> set_timings functions, was to add display disable & enable calls to the
> "timings" sysfs write. omapfb already only calls set_timings when the
> output is disabled, and omapdrm does the same.
Okay, that sounds good then.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
@ 2012-09-05 11:48 ` Archit Taneja
0 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 11:48 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 05:11 PM, Tomi Valkeinen wrote:
> On Wed, 2012-09-05 at 17:04 +0530, Archit Taneja wrote:
>> On Wednesday 05 September 2012 04:11 PM, Tomi Valkeinen wrote:
>>> On Wed, 2012-09-05 at 14:45 +0530, Archit Taneja wrote:
>>>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
>>>>> dss_mgr_set_timings() can only be called when the output is not active.
>>>>> This means that most of the code in the function is extra, as there's no
>>>>> need to write the values to registers, etc, because that will be handled
>>>>> when the output will be enabled.
>>>>
>>>> We need to fix dpi_set_timings() before we can make this change. DPI
>>>> still tries to change timings on the fly, i.e, with manager enabled. We
>>>> need to disable and enable the DPI output like we do for other outputs.
>>>
>>> Yep, and for HDMI also (I didn't check the others yet).
>>
>> I don't think HDMI is impacted, we do the full power off and power on
>> for HDMI, so the manager would be disabled when we set the timings.
>
> Ah right.
>
>>> I think the simplest way to handle this is to only write the dpi.timings
>>> in omapdss_dpi_set_timings, and remove the call to dss_mgr_set_timings.
>>> This is not perfect, as a call to omapdss_dpi_set_timings when the
>>> display is enabled would result in changing the dpi.timings, but the
>>> changes wouldn't be actually in use.
>>
>> The simplest way would be to do what other outputs do, disable the
>> output and re-enable the output with the new timings value, if the panel
>> is enabled.
>
> Not quite, as there's the mutex in dpi so we can't call enable/disable
> from set_timings. I could create separate non-locked internal functions
> for enable and disable, but that feels more complex than just removing
> the enable & disable from set_timings.
Okay, right.
>
> In the end we'll anyway only allow changing timings when the output is
> disabled.
>
> The only change I had to do, in addition to removing code from
> set_timings functions, was to add display disable & enable calls to the
> "timings" sysfs write. omapfb already only calls set_timings when the
> output is disabled, and omapdrm does the same.
Okay, that sounds good then.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 13:43 ` Archit Taneja
-1 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 13:31 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> Now that fifo merge has been removed, nobody uses the extra_info related
> completion code, which can be removed.
I think this might come into use when we fix the usage of channel out
field. That is, since channel out is an immediate write field, when we
set a new manager for an overlay, we may need to wait till the overlay
disable kicks in, only then we should change channel out.
For this, we would need some wait for extra_info, right?
Archit
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/apply.c | 69 ---------------------------------------
> 1 file changed, 69 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 32b5379..2579d15 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -118,7 +118,6 @@ static struct {
> static spinlock_t data_lock;
> /* lock for blocking functions */
> static DEFINE_MUTEX(apply_lock);
> -static DECLARE_COMPLETION(extra_updated_completion);
>
> static void dss_register_vsync_isr(void);
>
> @@ -355,69 +354,6 @@ static bool need_go(struct omap_overlay_manager *mgr)
> return false;
> }
>
> -/* returns true if an extra_info field is currently being updated */
> -static bool extra_info_update_ongoing(void)
> -{
> - const int num_mgrs = dss_feat_get_num_mgrs();
> - int i;
> -
> - for (i = 0; i < num_mgrs; ++i) {
> - struct omap_overlay_manager *mgr;
> - struct omap_overlay *ovl;
> - struct mgr_priv_data *mp;
> -
> - mgr = omap_dss_get_overlay_manager(i);
> - mp = get_mgr_priv(mgr);
> -
> - if (!mp->enabled)
> - continue;
> -
> - if (!mp->updating)
> - continue;
> -
> - if (mp->extra_info_dirty || mp->shadow_extra_info_dirty)
> - return true;
> -
> - list_for_each_entry(ovl, &mgr->overlays, list) {
> - struct ovl_priv_data *op = get_ovl_priv(ovl);
> -
> - if (op->extra_info_dirty || op->shadow_extra_info_dirty)
> - return true;
> - }
> - }
> -
> - return false;
> -}
> -
> -/* wait until no extra_info updates are pending */
> -static void wait_pending_extra_info_updates(void)
> -{
> - bool updating;
> - unsigned long flags;
> - unsigned long t;
> - int r;
> -
> - spin_lock_irqsave(&data_lock, flags);
> -
> - updating = extra_info_update_ongoing();
> -
> - if (!updating) {
> - spin_unlock_irqrestore(&data_lock, flags);
> - return;
> - }
> -
> - init_completion(&extra_updated_completion);
> -
> - spin_unlock_irqrestore(&data_lock, flags);
> -
> - t = msecs_to_jiffies(500);
> - r = wait_for_completion_timeout(&extra_updated_completion, t);
> - if (r == 0)
> - DSSWARN("timeout in wait_pending_extra_info_updates\n");
> - else if (r < 0)
> - DSSERR("wait_pending_extra_info_updates failed: %d\n", r);
> -}
> -
> int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
> {
> unsigned long timeout = msecs_to_jiffies(500);
> @@ -823,7 +759,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
> {
> const int num_mgrs = dss_feat_get_num_mgrs();
> int i;
> - bool extra_updating;
>
> spin_lock(&data_lock);
>
> @@ -854,10 +789,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
> dss_write_regs();
> dss_set_go_bits();
>
> - extra_updating = extra_info_update_ongoing();
> - if (!extra_updating)
> - complete_all(&extra_updated_completion);
> -
> if (!need_isr())
> dss_unregister_vsync_isr();
>
>
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 13/17] Revert "OMAPDSS: APPLY: add fifo-merge support"
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-05 13:55 ` Archit Taneja
-1 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 13:43 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> This reverts commit 1d71f42b35ed66d90a9a39bc515bb16cfe2d4a46.
>
> Adding fifo merge feature as an omapdss internal configuration was a
> mistake. We cannot hide from the users of omapdss the complexities of
> fifo merge.
>
> This commit removes the fifo merge support, which luckily is easily done
> as it was handled totally inside apply.c.
>
> The plan is to try fifo merge again later when it is more clear how the
> hardware acts in various situations, and how the omapdrm wants to use
> fifo merge.
Nitpick: This isn't an exact revert right? Maybe we should mention that,
so that if someone tries to apply the old patch, it doesn't fail.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/apply.c | 154 ++-------------------------------------
> 1 file changed, 8 insertions(+), 146 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 1b49019..02943a5 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -993,11 +993,11 @@ static void dss_apply_fifo_merge(bool use_fifo_merge)
> dss_data.fifo_merge_dirty = true;
> }
>
> -static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
> - bool use_fifo_merge)
> +static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
> {
> struct ovl_priv_data *op = get_ovl_priv(ovl);
> u32 fifo_low, fifo_high;
> + bool use_fifo_merge = false;
This looks like the line which wasn't removed in the original commit.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
@ 2012-09-05 13:43 ` Archit Taneja
0 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 13:43 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> Now that fifo merge has been removed, nobody uses the extra_info related
> completion code, which can be removed.
I think this might come into use when we fix the usage of channel out
field. That is, since channel out is an immediate write field, when we
set a new manager for an overlay, we may need to wait till the overlay
disable kicks in, only then we should change channel out.
For this, we would need some wait for extra_info, right?
Archit
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/apply.c | 69 ---------------------------------------
> 1 file changed, 69 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 32b5379..2579d15 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -118,7 +118,6 @@ static struct {
> static spinlock_t data_lock;
> /* lock for blocking functions */
> static DEFINE_MUTEX(apply_lock);
> -static DECLARE_COMPLETION(extra_updated_completion);
>
> static void dss_register_vsync_isr(void);
>
> @@ -355,69 +354,6 @@ static bool need_go(struct omap_overlay_manager *mgr)
> return false;
> }
>
> -/* returns true if an extra_info field is currently being updated */
> -static bool extra_info_update_ongoing(void)
> -{
> - const int num_mgrs = dss_feat_get_num_mgrs();
> - int i;
> -
> - for (i = 0; i < num_mgrs; ++i) {
> - struct omap_overlay_manager *mgr;
> - struct omap_overlay *ovl;
> - struct mgr_priv_data *mp;
> -
> - mgr = omap_dss_get_overlay_manager(i);
> - mp = get_mgr_priv(mgr);
> -
> - if (!mp->enabled)
> - continue;
> -
> - if (!mp->updating)
> - continue;
> -
> - if (mp->extra_info_dirty || mp->shadow_extra_info_dirty)
> - return true;
> -
> - list_for_each_entry(ovl, &mgr->overlays, list) {
> - struct ovl_priv_data *op = get_ovl_priv(ovl);
> -
> - if (op->extra_info_dirty || op->shadow_extra_info_dirty)
> - return true;
> - }
> - }
> -
> - return false;
> -}
> -
> -/* wait until no extra_info updates are pending */
> -static void wait_pending_extra_info_updates(void)
> -{
> - bool updating;
> - unsigned long flags;
> - unsigned long t;
> - int r;
> -
> - spin_lock_irqsave(&data_lock, flags);
> -
> - updating = extra_info_update_ongoing();
> -
> - if (!updating) {
> - spin_unlock_irqrestore(&data_lock, flags);
> - return;
> - }
> -
> - init_completion(&extra_updated_completion);
> -
> - spin_unlock_irqrestore(&data_lock, flags);
> -
> - t = msecs_to_jiffies(500);
> - r = wait_for_completion_timeout(&extra_updated_completion, t);
> - if (r = 0)
> - DSSWARN("timeout in wait_pending_extra_info_updates\n");
> - else if (r < 0)
> - DSSERR("wait_pending_extra_info_updates failed: %d\n", r);
> -}
> -
> int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
> {
> unsigned long timeout = msecs_to_jiffies(500);
> @@ -823,7 +759,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
> {
> const int num_mgrs = dss_feat_get_num_mgrs();
> int i;
> - bool extra_updating;
>
> spin_lock(&data_lock);
>
> @@ -854,10 +789,6 @@ static void dss_apply_irq_handler(void *data, u32 mask)
> dss_write_regs();
> dss_set_go_bits();
>
> - extra_updating = extra_info_update_ongoing();
> - if (!extra_updating)
> - complete_all(&extra_updated_completion);
> -
> if (!need_isr())
> dss_unregister_vsync_isr();
>
>
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 13/17] Revert "OMAPDSS: APPLY: add fifo-merge support"
@ 2012-09-05 13:55 ` Archit Taneja
0 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-05 13:55 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> This reverts commit 1d71f42b35ed66d90a9a39bc515bb16cfe2d4a46.
>
> Adding fifo merge feature as an omapdss internal configuration was a
> mistake. We cannot hide from the users of omapdss the complexities of
> fifo merge.
>
> This commit removes the fifo merge support, which luckily is easily done
> as it was handled totally inside apply.c.
>
> The plan is to try fifo merge again later when it is more clear how the
> hardware acts in various situations, and how the omapdrm wants to use
> fifo merge.
Nitpick: This isn't an exact revert right? Maybe we should mention that,
so that if someone tries to apply the old patch, it doesn't fail.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/apply.c | 154 ++-------------------------------------
> 1 file changed, 8 insertions(+), 146 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 1b49019..02943a5 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -993,11 +993,11 @@ static void dss_apply_fifo_merge(bool use_fifo_merge)
> dss_data.fifo_merge_dirty = true;
> }
>
> -static void dss_ovl_setup_fifo(struct omap_overlay *ovl,
> - bool use_fifo_merge)
> +static void dss_ovl_setup_fifo(struct omap_overlay *ovl)
> {
> struct ovl_priv_data *op = get_ovl_priv(ovl);
> u32 fifo_low, fifo_high;
> + bool use_fifo_merge = false;
This looks like the line which wasn't removed in the original commit.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 13/17] Revert "OMAPDSS: APPLY: add fifo-merge support"
2012-09-05 13:55 ` Archit Taneja
@ 2012-09-06 12:55 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-06 12:55 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 850 bytes --]
On Wed, 2012-09-05 at 19:13 +0530, Archit Taneja wrote:
> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> > This reverts commit 1d71f42b35ed66d90a9a39bc515bb16cfe2d4a46.
> >
> > Adding fifo merge feature as an omapdss internal configuration was a
> > mistake. We cannot hide from the users of omapdss the complexities of
> > fifo merge.
> >
> > This commit removes the fifo merge support, which luckily is easily done
> > as it was handled totally inside apply.c.
> >
> > The plan is to try fifo merge again later when it is more clear how the
> > hardware acts in various situations, and how the omapdrm wants to use
> > fifo merge.
>
> Nitpick: This isn't an exact revert right? Maybe we should mention that,
> so that if someone tries to apply the old patch, it doesn't fail.
Yep, I added a note.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 13/17] Revert "OMAPDSS: APPLY: add fifo-merge support"
@ 2012-09-06 12:55 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-06 12:55 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 850 bytes --]
On Wed, 2012-09-05 at 19:13 +0530, Archit Taneja wrote:
> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> > This reverts commit 1d71f42b35ed66d90a9a39bc515bb16cfe2d4a46.
> >
> > Adding fifo merge feature as an omapdss internal configuration was a
> > mistake. We cannot hide from the users of omapdss the complexities of
> > fifo merge.
> >
> > This commit removes the fifo merge support, which luckily is easily done
> > as it was handled totally inside apply.c.
> >
> > The plan is to try fifo merge again later when it is more clear how the
> > hardware acts in various situations, and how the omapdrm wants to use
> > fifo merge.
>
> Nitpick: This isn't an exact revert right? Maybe we should mention that,
> so that if someone tries to apply the old patch, it doesn't fail.
Yep, I added a note.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
2012-09-05 13:43 ` Archit Taneja
@ 2012-09-06 13:04 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-06 13:04 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 974 bytes --]
On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> > Now that fifo merge has been removed, nobody uses the extra_info related
> > completion code, which can be removed.
>
> I think this might come into use when we fix the usage of channel out
> field. That is, since channel out is an immediate write field, when we
> set a new manager for an overlay, we may need to wait till the overlay
> disable kicks in, only then we should change channel out.
>
> For this, we would need some wait for extra_info, right?
Hmm, yes, I think you are right. Previously the ovl_disable waited until
the overlay is not used anymore, but now it doesn't.
So I think I need to add wait_pending_extra_info_updates() call to the
beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
I think unset is better, then a "free" overlay always disabled also in
the HW level.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
@ 2012-09-06 13:04 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-06 13:04 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 974 bytes --]
On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> > Now that fifo merge has been removed, nobody uses the extra_info related
> > completion code, which can be removed.
>
> I think this might come into use when we fix the usage of channel out
> field. That is, since channel out is an immediate write field, when we
> set a new manager for an overlay, we may need to wait till the overlay
> disable kicks in, only then we should change channel out.
>
> For this, we would need some wait for extra_info, right?
Hmm, yes, I think you are right. Previously the ovl_disable waited until
the overlay is not used anymore, but now it doesn't.
So I think I need to add wait_pending_extra_info_updates() call to the
beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
I think unset is better, then a "free" overlay always disabled also in
the HW level.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
2012-09-06 13:04 ` Tomi Valkeinen
@ 2012-09-06 13:47 ` Archit Taneja
-1 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-06 13:35 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Thursday 06 September 2012 06:34 PM, Tomi Valkeinen wrote:
> On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
>>> Now that fifo merge has been removed, nobody uses the extra_info related
>>> completion code, which can be removed.
>>
>> I think this might come into use when we fix the usage of channel out
>> field. That is, since channel out is an immediate write field, when we
>> set a new manager for an overlay, we may need to wait till the overlay
>> disable kicks in, only then we should change channel out.
>>
>> For this, we would need some wait for extra_info, right?
>
> Hmm, yes, I think you are right. Previously the ovl_disable waited until
> the overlay is not used anymore, but now it doesn't.
>
> So I think I need to add wait_pending_extra_info_updates() call to the
> beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
> I think unset is better, then a "free" overlay always disabled also in
> the HW level.
Yes, I also think it should be in unset_manager. One option could be to
leave the wait_pending_extra_info_updates() in ovl_disable itself, as it
was before. But that would force us to use mutexes there, and we'd
rather have overlay enabling and disabling as a non blocking thing.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
2012-09-06 13:47 ` Archit Taneja
@ 2012-09-06 13:42 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-06 13:42 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1798 bytes --]
On Thu, 2012-09-06 at 19:05 +0530, Archit Taneja wrote:
> On Thursday 06 September 2012 06:34 PM, Tomi Valkeinen wrote:
> > On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
> >> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> >>> Now that fifo merge has been removed, nobody uses the extra_info related
> >>> completion code, which can be removed.
> >>
> >> I think this might come into use when we fix the usage of channel out
> >> field. That is, since channel out is an immediate write field, when we
> >> set a new manager for an overlay, we may need to wait till the overlay
> >> disable kicks in, only then we should change channel out.
> >>
> >> For this, we would need some wait for extra_info, right?
> >
> > Hmm, yes, I think you are right. Previously the ovl_disable waited until
> > the overlay is not used anymore, but now it doesn't.
> >
> > So I think I need to add wait_pending_extra_info_updates() call to the
> > beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
> > I think unset is better, then a "free" overlay always disabled also in
> > the HW level.
>
> Yes, I also think it should be in unset_manager. One option could be to
> leave the wait_pending_extra_info_updates() in ovl_disable itself, as it
> was before. But that would force us to use mutexes there, and we'd
> rather have overlay enabling and disabling as a non blocking thing.
Actually, we do have mutexes there. You are thinking about the prototype
API I have. (I also thought we didn't have mutex there =).
So, in fact, we can have the wait at ovl_disable like it was before. The
prototype API, which cannot block, will not have the wait, but there the
caller (i.e. omapdrm) will have to manage the proper wait.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
@ 2012-09-06 13:42 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-06 13:42 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1798 bytes --]
On Thu, 2012-09-06 at 19:05 +0530, Archit Taneja wrote:
> On Thursday 06 September 2012 06:34 PM, Tomi Valkeinen wrote:
> > On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
> >> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> >>> Now that fifo merge has been removed, nobody uses the extra_info related
> >>> completion code, which can be removed.
> >>
> >> I think this might come into use when we fix the usage of channel out
> >> field. That is, since channel out is an immediate write field, when we
> >> set a new manager for an overlay, we may need to wait till the overlay
> >> disable kicks in, only then we should change channel out.
> >>
> >> For this, we would need some wait for extra_info, right?
> >
> > Hmm, yes, I think you are right. Previously the ovl_disable waited until
> > the overlay is not used anymore, but now it doesn't.
> >
> > So I think I need to add wait_pending_extra_info_updates() call to the
> > beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
> > I think unset is better, then a "free" overlay always disabled also in
> > the HW level.
>
> Yes, I also think it should be in unset_manager. One option could be to
> leave the wait_pending_extra_info_updates() in ovl_disable itself, as it
> was before. But that would force us to use mutexes there, and we'd
> rather have overlay enabling and disabling as a non blocking thing.
Actually, we do have mutexes there. You are thinking about the prototype
API I have. (I also thought we didn't have mutex there =).
So, in fact, we can have the wait at ovl_disable like it was before. The
prototype API, which cannot block, will not have the wait, but there the
caller (i.e. omapdrm) will have to manage the proper wait.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
@ 2012-09-06 13:47 ` Archit Taneja
0 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-06 13:47 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Thursday 06 September 2012 06:34 PM, Tomi Valkeinen wrote:
> On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
>>> Now that fifo merge has been removed, nobody uses the extra_info related
>>> completion code, which can be removed.
>>
>> I think this might come into use when we fix the usage of channel out
>> field. That is, since channel out is an immediate write field, when we
>> set a new manager for an overlay, we may need to wait till the overlay
>> disable kicks in, only then we should change channel out.
>>
>> For this, we would need some wait for extra_info, right?
>
> Hmm, yes, I think you are right. Previously the ovl_disable waited until
> the overlay is not used anymore, but now it doesn't.
>
> So I think I need to add wait_pending_extra_info_updates() call to the
> beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
> I think unset is better, then a "free" overlay always disabled also in
> the HW level.
Yes, I also think it should be in unset_manager. One option could be to
leave the wait_pending_extra_info_updates() in ovl_disable itself, as it
was before. But that would force us to use mutexes there, and we'd
rather have overlay enabling and disabling as a non blocking thing.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
2012-09-06 13:42 ` Tomi Valkeinen
@ 2012-09-06 14:13 ` Archit Taneja
-1 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-06 14:01 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Thursday 06 September 2012 07:12 PM, Tomi Valkeinen wrote:
> On Thu, 2012-09-06 at 19:05 +0530, Archit Taneja wrote:
>> On Thursday 06 September 2012 06:34 PM, Tomi Valkeinen wrote:
>>> On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
>>>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
>>>>> Now that fifo merge has been removed, nobody uses the extra_info related
>>>>> completion code, which can be removed.
>>>>
>>>> I think this might come into use when we fix the usage of channel out
>>>> field. That is, since channel out is an immediate write field, when we
>>>> set a new manager for an overlay, we may need to wait till the overlay
>>>> disable kicks in, only then we should change channel out.
>>>>
>>>> For this, we would need some wait for extra_info, right?
>>>
>>> Hmm, yes, I think you are right. Previously the ovl_disable waited until
>>> the overlay is not used anymore, but now it doesn't.
>>>
>>> So I think I need to add wait_pending_extra_info_updates() call to the
>>> beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
>>> I think unset is better, then a "free" overlay always disabled also in
>>> the HW level.
>>
>> Yes, I also think it should be in unset_manager. One option could be to
>> leave the wait_pending_extra_info_updates() in ovl_disable itself, as it
>> was before. But that would force us to use mutexes there, and we'd
>> rather have overlay enabling and disabling as a non blocking thing.
>
> Actually, we do have mutexes there. You are thinking about the prototype
> API I have. (I also thought we didn't have mutex there =).
Ah, I missed looking at that :)
>
> So, in fact, we can have the wait at ovl_disable like it was before. The
> prototype API, which cannot block, will not have the wait, but there the
> caller (i.e. omapdrm) will have to manage the proper wait.
I'm more inclined towards waiting in the unset_manager() now, we have a
choice between "wait in ovl_disable, ensure the overlay is actually
disabled in hw, and then get out" and "wait only when you know you need
to wait (i.e, in unset_manager)". The second choice seems more efficient.
This wait would could last for a 1 VSYNC if we do it in ovl_disable. If
the next task of the user of DSS is to enable another overlay, this wait
would unnecessarily delay the enabling of the second overlay by a VSYNC.
We could have done these tasks in the same VSYNC (since we aren't
supporting fifomerge).
So, I feel that we should rather wait in unset_manager, where we know an
immediate write can mess things up. Maybe, we could delay it set_manager
too. But yeah, we won't know whether we are aligned with hw or not.
So even with the prototype API, where omapdrm is responsible for doing
the waiting, it should probably wait when switching the manager, rather
than when disabling the overlay.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
@ 2012-09-06 14:13 ` Archit Taneja
0 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-06 14:13 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap, linux-fbdev
On Thursday 06 September 2012 07:12 PM, Tomi Valkeinen wrote:
> On Thu, 2012-09-06 at 19:05 +0530, Archit Taneja wrote:
>> On Thursday 06 September 2012 06:34 PM, Tomi Valkeinen wrote:
>>> On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
>>>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
>>>>> Now that fifo merge has been removed, nobody uses the extra_info related
>>>>> completion code, which can be removed.
>>>>
>>>> I think this might come into use when we fix the usage of channel out
>>>> field. That is, since channel out is an immediate write field, when we
>>>> set a new manager for an overlay, we may need to wait till the overlay
>>>> disable kicks in, only then we should change channel out.
>>>>
>>>> For this, we would need some wait for extra_info, right?
>>>
>>> Hmm, yes, I think you are right. Previously the ovl_disable waited until
>>> the overlay is not used anymore, but now it doesn't.
>>>
>>> So I think I need to add wait_pending_extra_info_updates() call to the
>>> beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
>>> I think unset is better, then a "free" overlay always disabled also in
>>> the HW level.
>>
>> Yes, I also think it should be in unset_manager. One option could be to
>> leave the wait_pending_extra_info_updates() in ovl_disable itself, as it
>> was before. But that would force us to use mutexes there, and we'd
>> rather have overlay enabling and disabling as a non blocking thing.
>
> Actually, we do have mutexes there. You are thinking about the prototype
> API I have. (I also thought we didn't have mutex there =).
Ah, I missed looking at that :)
>
> So, in fact, we can have the wait at ovl_disable like it was before. The
> prototype API, which cannot block, will not have the wait, but there the
> caller (i.e. omapdrm) will have to manage the proper wait.
I'm more inclined towards waiting in the unset_manager() now, we have a
choice between "wait in ovl_disable, ensure the overlay is actually
disabled in hw, and then get out" and "wait only when you know you need
to wait (i.e, in unset_manager)". The second choice seems more efficient.
This wait would could last for a 1 VSYNC if we do it in ovl_disable. If
the next task of the user of DSS is to enable another overlay, this wait
would unnecessarily delay the enabling of the second overlay by a VSYNC.
We could have done these tasks in the same VSYNC (since we aren't
supporting fifomerge).
So, I feel that we should rather wait in unset_manager, where we know an
immediate write can mess things up. Maybe, we could delay it set_manager
too. But yeah, we won't know whether we are aligned with hw or not.
So even with the prototype API, where omapdrm is responsible for doing
the waiting, it should probably wait when switching the manager, rather
than when disabling the overlay.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
2012-09-06 14:13 ` Archit Taneja
@ 2012-09-06 14:29 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-06 14:29 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 3812 bytes --]
On Thu, 2012-09-06 at 19:31 +0530, Archit Taneja wrote:
> On Thursday 06 September 2012 07:12 PM, Tomi Valkeinen wrote:
> > On Thu, 2012-09-06 at 19:05 +0530, Archit Taneja wrote:
> >> On Thursday 06 September 2012 06:34 PM, Tomi Valkeinen wrote:
> >>> On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
> >>>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> >>>>> Now that fifo merge has been removed, nobody uses the extra_info related
> >>>>> completion code, which can be removed.
> >>>>
> >>>> I think this might come into use when we fix the usage of channel out
> >>>> field. That is, since channel out is an immediate write field, when we
> >>>> set a new manager for an overlay, we may need to wait till the overlay
> >>>> disable kicks in, only then we should change channel out.
> >>>>
> >>>> For this, we would need some wait for extra_info, right?
> >>>
> >>> Hmm, yes, I think you are right. Previously the ovl_disable waited until
> >>> the overlay is not used anymore, but now it doesn't.
> >>>
> >>> So I think I need to add wait_pending_extra_info_updates() call to the
> >>> beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
> >>> I think unset is better, then a "free" overlay always disabled also in
> >>> the HW level.
> >>
> >> Yes, I also think it should be in unset_manager. One option could be to
> >> leave the wait_pending_extra_info_updates() in ovl_disable itself, as it
> >> was before. But that would force us to use mutexes there, and we'd
> >> rather have overlay enabling and disabling as a non blocking thing.
> >
> > Actually, we do have mutexes there. You are thinking about the prototype
> > API I have. (I also thought we didn't have mutex there =).
>
> Ah, I missed looking at that :)
>
> >
> > So, in fact, we can have the wait at ovl_disable like it was before. The
> > prototype API, which cannot block, will not have the wait, but there the
> > caller (i.e. omapdrm) will have to manage the proper wait.
>
> I'm more inclined towards waiting in the unset_manager() now, we have a
> choice between "wait in ovl_disable, ensure the overlay is actually
> disabled in hw, and then get out" and "wait only when you know you need
> to wait (i.e, in unset_manager)". The second choice seems more efficient.
>
> This wait would could last for a 1 VSYNC if we do it in ovl_disable. If
> the next task of the user of DSS is to enable another overlay, this wait
> would unnecessarily delay the enabling of the second overlay by a VSYNC.
> We could have done these tasks in the same VSYNC (since we aren't
> supporting fifomerge).
>
> So, I feel that we should rather wait in unset_manager, where we know an
> immediate write can mess things up. Maybe, we could delay it set_manager
> too. But yeah, we won't know whether we are aligned with hw or not.
Good points. Then again, the wait function doesn't wait for the ovl to
be disabled, it waits for all extra_info changes to be done. So we could
be waiting unnecessarily in unset/set_manager. Which makes me think that
we should remove the current wait function and implement a specialized
wait for ovl disable. But that can be looked at later if seen necessary.
Also, it feels safer to ensure the ovl is disabled at ovl_disable call.
However, I was going through the code and I didn't come up with a case
where it would cause problems, except the set_manager part.
So, I guess having the wait in unset_manager is still best overall, we
don't unnecessarily spend time waiting at ovl_disable.
> So even with the prototype API, where omapdrm is responsible for doing
> the waiting, it should probably wait when switching the manager, rather
> than when disabling the overlay.
Yep.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 15/17] OMAPDSS: remove extra_info completion code
@ 2012-09-06 14:29 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-06 14:29 UTC (permalink / raw)
To: Archit Taneja; +Cc: linux-omap, linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 3812 bytes --]
On Thu, 2012-09-06 at 19:31 +0530, Archit Taneja wrote:
> On Thursday 06 September 2012 07:12 PM, Tomi Valkeinen wrote:
> > On Thu, 2012-09-06 at 19:05 +0530, Archit Taneja wrote:
> >> On Thursday 06 September 2012 06:34 PM, Tomi Valkeinen wrote:
> >>> On Wed, 2012-09-05 at 19:01 +0530, Archit Taneja wrote:
> >>>> On Wednesday 05 September 2012 01:55 PM, Tomi Valkeinen wrote:
> >>>>> Now that fifo merge has been removed, nobody uses the extra_info related
> >>>>> completion code, which can be removed.
> >>>>
> >>>> I think this might come into use when we fix the usage of channel out
> >>>> field. That is, since channel out is an immediate write field, when we
> >>>> set a new manager for an overlay, we may need to wait till the overlay
> >>>> disable kicks in, only then we should change channel out.
> >>>>
> >>>> For this, we would need some wait for extra_info, right?
> >>>
> >>> Hmm, yes, I think you are right. Previously the ovl_disable waited until
> >>> the overlay is not used anymore, but now it doesn't.
> >>>
> >>> So I think I need to add wait_pending_extra_info_updates() call to the
> >>> beginning of dss_ovl_set_manager(). Or, should it be in unset_manager...
> >>> I think unset is better, then a "free" overlay always disabled also in
> >>> the HW level.
> >>
> >> Yes, I also think it should be in unset_manager. One option could be to
> >> leave the wait_pending_extra_info_updates() in ovl_disable itself, as it
> >> was before. But that would force us to use mutexes there, and we'd
> >> rather have overlay enabling and disabling as a non blocking thing.
> >
> > Actually, we do have mutexes there. You are thinking about the prototype
> > API I have. (I also thought we didn't have mutex there =).
>
> Ah, I missed looking at that :)
>
> >
> > So, in fact, we can have the wait at ovl_disable like it was before. The
> > prototype API, which cannot block, will not have the wait, but there the
> > caller (i.e. omapdrm) will have to manage the proper wait.
>
> I'm more inclined towards waiting in the unset_manager() now, we have a
> choice between "wait in ovl_disable, ensure the overlay is actually
> disabled in hw, and then get out" and "wait only when you know you need
> to wait (i.e, in unset_manager)". The second choice seems more efficient.
>
> This wait would could last for a 1 VSYNC if we do it in ovl_disable. If
> the next task of the user of DSS is to enable another overlay, this wait
> would unnecessarily delay the enabling of the second overlay by a VSYNC.
> We could have done these tasks in the same VSYNC (since we aren't
> supporting fifomerge).
>
> So, I feel that we should rather wait in unset_manager, where we know an
> immediate write can mess things up. Maybe, we could delay it set_manager
> too. But yeah, we won't know whether we are aligned with hw or not.
Good points. Then again, the wait function doesn't wait for the ovl to
be disabled, it waits for all extra_info changes to be done. So we could
be waiting unnecessarily in unset/set_manager. Which makes me think that
we should remove the current wait function and implement a specialized
wait for ovl disable. But that can be looked at later if seen necessary.
Also, it feels safer to ensure the ovl is disabled at ovl_disable call.
However, I was going through the code and I didn't come up with a case
where it would cause problems, except the set_manager part.
So, I guess having the wait in unset_manager is still best overall, we
don't unnecessarily spend time waiting at ovl_disable.
> So even with the prototype API, where omapdrm is responsible for doing
> the waiting, it should probably wait when switching the manager, rather
> than when disabling the overlay.
Yep.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
2012-09-05 8:25 ` Tomi Valkeinen
@ 2012-09-07 10:11 ` Tomi Valkeinen
-1 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-07 10:11 UTC (permalink / raw)
To: archit; +Cc: linux-fbdev, linux-omap
[-- Attachment #1: Type: text/plain, Size: 1907 bytes --]
On Wed, 2012-09-05 at 11:25 +0300, Tomi Valkeinen wrote:
> dss_mgr_set_timings() can only be called when the output is not active.
> This means that most of the code in the function is extra, as there's no
> need to write the values to registers, etc, because that will be handled
> when the output will be enabled.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/apply.c | 18 ++++++++----------
> 1 file changed, 8 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 53629dd..1b49019 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
> const struct omap_video_timings *timings)
> {
> unsigned long flags;
> -
> - mutex_lock(&apply_lock);
> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>
> spin_lock_irqsave(&data_lock, flags);
>
> - dss_apply_mgr_timings(mgr, timings);
> -
> - dss_write_regs();
> - dss_set_go_bits();
> + if (mp->enabled) {
> + DSSERR("cannot set timings for %s: manager needs to be disabled\n",
> + mgr->name);
> + goto out;
> + }
There was a problem with this one. When using manual update display, we
call set_timings before each update, and the mgr is enabled at that
time.
I'll fix this by changing the check from mp->enabled to mp->updating.
That flag tells if the DISPC channel is actually enabled or not. Enabled
flag just tells that the channel is being reserved, although for auto
update displays that also implies "updating".
But do you see any reason to call set_timings before each update? It was
required when we have partial update support, but now we support only
full screen updates, so isn't it enough to set the timings just once
when configuring?
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
@ 2012-09-07 10:11 ` Tomi Valkeinen
0 siblings, 0 replies; 66+ messages in thread
From: Tomi Valkeinen @ 2012-09-07 10:11 UTC (permalink / raw)
To: archit; +Cc: linux-fbdev, linux-omap
[-- Attachment #1: Type: text/plain, Size: 1907 bytes --]
On Wed, 2012-09-05 at 11:25 +0300, Tomi Valkeinen wrote:
> dss_mgr_set_timings() can only be called when the output is not active.
> This means that most of the code in the function is extra, as there's no
> need to write the values to registers, etc, because that will be handled
> when the output will be enabled.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> ---
> drivers/video/omap2/dss/apply.c | 18 ++++++++----------
> 1 file changed, 8 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
> index 53629dd..1b49019 100644
> --- a/drivers/video/omap2/dss/apply.c
> +++ b/drivers/video/omap2/dss/apply.c
> @@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
> const struct omap_video_timings *timings)
> {
> unsigned long flags;
> -
> - mutex_lock(&apply_lock);
> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>
> spin_lock_irqsave(&data_lock, flags);
>
> - dss_apply_mgr_timings(mgr, timings);
> -
> - dss_write_regs();
> - dss_set_go_bits();
> + if (mp->enabled) {
> + DSSERR("cannot set timings for %s: manager needs to be disabled\n",
> + mgr->name);
> + goto out;
> + }
There was a problem with this one. When using manual update display, we
call set_timings before each update, and the mgr is enabled at that
time.
I'll fix this by changing the check from mp->enabled to mp->updating.
That flag tells if the DISPC channel is actually enabled or not. Enabled
flag just tells that the channel is being reserved, although for auto
update displays that also implies "updating".
But do you see any reason to call set_timings before each update? It was
required when we have partial update support, but now we support only
full screen updates, so isn't it enough to set the timings just once
when configuring?
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
2012-09-07 10:11 ` Tomi Valkeinen
@ 2012-09-07 11:48 ` Archit Taneja
-1 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-07 11:36 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-fbdev, linux-omap
On Friday 07 September 2012 03:41 PM, Tomi Valkeinen wrote:
> On Wed, 2012-09-05 at 11:25 +0300, Tomi Valkeinen wrote:
>> dss_mgr_set_timings() can only be called when the output is not active.
>> This means that most of the code in the function is extra, as there's no
>> need to write the values to registers, etc, because that will be handled
>> when the output will be enabled.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> ---
>> drivers/video/omap2/dss/apply.c | 18 ++++++++----------
>> 1 file changed, 8 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
>> index 53629dd..1b49019 100644
>> --- a/drivers/video/omap2/dss/apply.c
>> +++ b/drivers/video/omap2/dss/apply.c
>> @@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
>> const struct omap_video_timings *timings)
>> {
>> unsigned long flags;
>> -
>> - mutex_lock(&apply_lock);
>> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>>
>> spin_lock_irqsave(&data_lock, flags);
>>
>> - dss_apply_mgr_timings(mgr, timings);
>> -
>> - dss_write_regs();
>> - dss_set_go_bits();
>> + if (mp->enabled) {
>> + DSSERR("cannot set timings for %s: manager needs to be disabled\n",
>> + mgr->name);
>> + goto out;
>> + }
>
> There was a problem with this one. When using manual update display, we
> call set_timings before each update, and the mgr is enabled at that
> time.
>
> I'll fix this by changing the check from mp->enabled to mp->updating.
> That flag tells if the DISPC channel is actually enabled or not. Enabled
> flag just tells that the channel is being reserved, although for auto
> update displays that also implies "updating".
>
> But do you see any reason to call set_timings before each update? It was
> required when we have partial update support, but now we support only
> full screen updates, so isn't it enough to set the timings just once
> when configuring?
I think we put it there for rotation. We may need to swap manager width
and height before an update.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
* Re: [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings
@ 2012-09-07 11:48 ` Archit Taneja
0 siblings, 0 replies; 66+ messages in thread
From: Archit Taneja @ 2012-09-07 11:48 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-fbdev, linux-omap
On Friday 07 September 2012 03:41 PM, Tomi Valkeinen wrote:
> On Wed, 2012-09-05 at 11:25 +0300, Tomi Valkeinen wrote:
>> dss_mgr_set_timings() can only be called when the output is not active.
>> This means that most of the code in the function is extra, as there's no
>> need to write the values to registers, etc, because that will be handled
>> when the output will be enabled.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> ---
>> drivers/video/omap2/dss/apply.c | 18 ++++++++----------
>> 1 file changed, 8 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/omap2/dss/apply.c
>> index 53629dd..1b49019 100644
>> --- a/drivers/video/omap2/dss/apply.c
>> +++ b/drivers/video/omap2/dss/apply.c
>> @@ -1314,21 +1314,19 @@ void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
>> const struct omap_video_timings *timings)
>> {
>> unsigned long flags;
>> -
>> - mutex_lock(&apply_lock);
>> + struct mgr_priv_data *mp = get_mgr_priv(mgr);
>>
>> spin_lock_irqsave(&data_lock, flags);
>>
>> - dss_apply_mgr_timings(mgr, timings);
>> -
>> - dss_write_regs();
>> - dss_set_go_bits();
>> + if (mp->enabled) {
>> + DSSERR("cannot set timings for %s: manager needs to be disabled\n",
>> + mgr->name);
>> + goto out;
>> + }
>
> There was a problem with this one. When using manual update display, we
> call set_timings before each update, and the mgr is enabled at that
> time.
>
> I'll fix this by changing the check from mp->enabled to mp->updating.
> That flag tells if the DISPC channel is actually enabled or not. Enabled
> flag just tells that the channel is being reserved, although for auto
> update displays that also implies "updating".
>
> But do you see any reason to call set_timings before each update? It was
> required when we have partial update support, but now we support only
> full screen updates, so isn't it enough to set the timings just once
> when configuring?
I think we put it there for rotation. We may need to swap manager width
and height before an update.
Archit
^ permalink raw reply [flat|nested] 66+ messages in thread
end of thread, other threads:[~2012-09-07 11:48 UTC | newest]
Thread overview: 66+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-09-05 8:25 [PATCH 00/17] Misc OMAP DSS patches part 2 Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 01/17] OMAPDSS: Taal: use devm_* functions Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 02/17] OMAPFB1: remove unnecessary includes Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 03/17] OMAPFB1: remove a non-used table Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 04/17] OMAPDSS: remove unnecessary includes Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 05/17] OMAPFB: clear framebuffers with CPU Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 06/17] OMAPDSS: VRAM: Remove clearing with sDMA Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 07/17] OMAPDSS: Taal: Reogranize for device tree Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 08/17] OMAPDSS: TFP410: use devm_gpio_request_one Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 09/17] OMAPDSS: split overlay sysfs code Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 10/17] OMAPDSS: split manager " Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 11/17] OMAPDSS: clean up dss_mgr_set_lcd_config Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 12/17] OMAPDSS: clean up dss_mgr_set_timings Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 9:15 ` Archit Taneja
2012-09-05 9:27 ` Archit Taneja
2012-09-05 10:41 ` Tomi Valkeinen
2012-09-05 10:41 ` Tomi Valkeinen
2012-09-05 11:34 ` Archit Taneja
2012-09-05 11:46 ` Archit Taneja
2012-09-05 11:41 ` Tomi Valkeinen
2012-09-05 11:41 ` Tomi Valkeinen
2012-09-05 11:48 ` Archit Taneja
2012-09-05 11:48 ` Archit Taneja
2012-09-07 10:11 ` Tomi Valkeinen
2012-09-07 10:11 ` Tomi Valkeinen
2012-09-07 11:36 ` Archit Taneja
2012-09-07 11:48 ` Archit Taneja
2012-09-05 8:25 ` [PATCH 13/17] Revert "OMAPDSS: APPLY: add fifo-merge support" Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 13:43 ` Archit Taneja
2012-09-05 13:55 ` Archit Taneja
2012-09-06 12:55 ` Tomi Valkeinen
2012-09-06 12:55 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 14/17] Revert "OMAPDSS: APPLY: add fifo merge support funcs" Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 15/17] OMAPDSS: remove extra_info completion code Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 13:31 ` Archit Taneja
2012-09-05 13:43 ` Archit Taneja
2012-09-06 13:04 ` Tomi Valkeinen
2012-09-06 13:04 ` Tomi Valkeinen
2012-09-06 13:35 ` Archit Taneja
2012-09-06 13:47 ` Archit Taneja
2012-09-06 13:42 ` Tomi Valkeinen
2012-09-06 13:42 ` Tomi Valkeinen
2012-09-06 14:01 ` Archit Taneja
2012-09-06 14:13 ` Archit Taneja
2012-09-06 14:29 ` Tomi Valkeinen
2012-09-06 14:29 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 16/17] OMAPDSS: Improve fifo management code Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
2012-09-05 8:25 ` [PATCH 17/17] OMAPDSS: Use WB fifo for GFX overlay Tomi Valkeinen
2012-09-05 8:25 ` Tomi Valkeinen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.