All of lore.kernel.org
 help / color / mirror / Atom feed
* Re: [PATCH] musb: Kill __init from function that are called at other times as well.
  2012-09-06 14:01 [PATCH] musb: Kill __init from function that are called at other times as well Pantelis Antoniou
@ 2012-09-06 13:04 ` Felipe Balbi
  2012-09-06 14:58   ` Pantelis Antoniou
  0 siblings, 1 reply; 9+ messages in thread
From: Felipe Balbi @ 2012-09-06 13:04 UTC (permalink / raw)
  To: Pantelis Antoniou; +Cc: linux-omap, Felipe Balbi, linux-usb

[-- Attachment #1: Type: text/plain, Size: 1345 bytes --]

On Thu, Sep 06, 2012 at 05:01:46PM +0300, Pantelis Antoniou wrote:
> Marking functions as __init or __devinit and calling them at other times
> leads to predictable crashes (if you're lucky).
> 
> Remove them for now.
> 
> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
> ---
>  drivers/usb/musb/musb_core.c    | 16 ++++++++--------
>  drivers/usb/musb/musb_debugfs.c |  2 +-
>  drivers/usb/musb/musb_dma.h     |  2 +-
>  drivers/usb/musb/musb_gadget.c  |  6 +++---
>  drivers/usb/musb/musbhsdma.c    |  2 +-
>  drivers/usb/musb/omap2430.c     |  2 +-
>  6 files changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index 26f1bef..215d2d5 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -1160,7 +1160,7 @@ static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
>   *
>   * returns negative errno or offset for next fifo.
>   */
> -static int __devinit
> +static int
>  fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
>  		const struct musb_fifo_cfg *cfg, u16 offset)

Are you sure all these functions are called from outside .init.text ? At
least fifo_setup(), ep_config_from_table() and musb_core_init() are only
during probe(), which sits in .init.text too.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH] musb: Kill __init from function that are called at other times as well.
@ 2012-09-06 14:01 Pantelis Antoniou
  2012-09-06 13:04 ` Felipe Balbi
  0 siblings, 1 reply; 9+ messages in thread
From: Pantelis Antoniou @ 2012-09-06 14:01 UTC (permalink / raw)
  To: linux-omap; +Cc: Felipe Balbi, linux-usb, Pantelis Antoniou

Marking functions as __init or __devinit and calling them at other times
leads to predictable crashes (if you're lucky).

Remove them for now.

Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
---
 drivers/usb/musb/musb_core.c    | 16 ++++++++--------
 drivers/usb/musb/musb_debugfs.c |  2 +-
 drivers/usb/musb/musb_dma.h     |  2 +-
 drivers/usb/musb/musb_gadget.c  |  6 +++---
 drivers/usb/musb/musbhsdma.c    |  2 +-
 drivers/usb/musb/omap2430.c     |  2 +-
 6 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 26f1bef..215d2d5 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1160,7 +1160,7 @@ static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
  *
  * returns negative errno or offset for next fifo.
  */
-static int __devinit
+static int
 fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
 		const struct musb_fifo_cfg *cfg, u16 offset)
 {
@@ -1235,7 +1235,7 @@ static struct musb_fifo_cfg __devinitdata ep0_cfg = {
 	.style = FIFO_RXTX, .maxpacket = 64,
 };
 
-static int __devinit ep_config_from_table(struct musb *musb)
+static int ep_config_from_table(struct musb *musb)
 {
 	const struct musb_fifo_cfg	*cfg;
 	unsigned		i, n;
@@ -1326,7 +1326,7 @@ done:
  * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false
  * @param musb the controller
  */
-static int __devinit ep_config_from_hw(struct musb *musb)
+static int ep_config_from_hw(struct musb *musb)
 {
 	u8 epnum = 0;
 	struct musb_hw_ep *hw_ep;
@@ -1373,7 +1373,7 @@ enum { MUSB_CONTROLLER_MHDRC, MUSB_CONTROLLER_HDRC, };
 /* Initialize MUSB (M)HDRC part of the USB hardware subsystem;
  * configure endpoints, or take their config from silicon
  */
-static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
+static int musb_core_init(u16 musb_type, struct musb *musb)
 {
 	u8 reg;
 	char *type;
@@ -1797,7 +1797,7 @@ static void musb_irq_work(struct work_struct *data)
  * Init support
  */
 
-static struct musb *__devinit
+static struct musb *
 allocate_instance(struct device *dev,
 		struct musb_hdrc_config *config, void __iomem *mbase)
 {
@@ -1873,7 +1873,7 @@ static void musb_free(struct musb *musb)
  * @mregs: virtual address of controller registers,
  *	not yet corrected for platform-specific offsets
  */
-static int __devinit
+static int
 musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 {
 	int			status;
@@ -2101,7 +2101,7 @@ fail0:
 static u64	*orig_dma_mask;
 #endif
 
-static int __devinit musb_probe(struct platform_device *pdev)
+static int musb_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
 	int		irq = platform_get_irq_byname(pdev, "mc");
@@ -2397,7 +2397,7 @@ static struct platform_driver musb_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __init musb_init(void)
+static int /* __init */ musb_init(void)
 {
 	if (usb_disabled())
 		return 0;
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 40a37c9..8f8597d 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -235,7 +235,7 @@ static const struct file_operations musb_test_mode_fops = {
 	.release		= single_release,
 };
 
-int __devinit musb_init_debugfs(struct musb *musb)
+int musb_init_debugfs(struct musb *musb)
 {
 	struct dentry		*root;
 	struct dentry		*file;
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 3a97c4e..69254c8 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -178,7 +178,7 @@ struct dma_controller {
 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
 
 
-extern struct dma_controller *__init
+extern struct dma_controller * /* __init */
 dma_controller_create(struct musb *, void __iomem *);
 
 extern void dma_controller_destroy(struct dma_controller *);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f7194cf..f3d9f4e 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1795,7 +1795,7 @@ static void musb_gadget_release(struct device *dev)
 }
 
 
-static void __devinit
+static void
 init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
 {
 	struct musb_hw_ep	*hw_ep = musb->endpoints + epnum;
@@ -1832,7 +1832,7 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
  * Initialize the endpoints exposed to peripheral drivers, with backlinks
  * to the rest of the driver state.
  */
-static inline void __devinit musb_g_init_endpoints(struct musb *musb)
+static inline void musb_g_init_endpoints(struct musb *musb)
 {
 	u8			epnum;
 	struct musb_hw_ep	*hw_ep;
@@ -1865,7 +1865,7 @@ static inline void __devinit musb_g_init_endpoints(struct musb *musb)
 /* called once during driver setup to initialize and link into
  * the driver model; memory is zeroed.
  */
-int __devinit musb_gadget_setup(struct musb *musb)
+int musb_gadget_setup(struct musb *musb)
 {
 	int status;
 
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 57a6085..49b548f 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -380,7 +380,7 @@ void dma_controller_destroy(struct dma_controller *c)
 	kfree(controller);
 }
 
-struct dma_controller *__init
+struct dma_controller * /* __init */
 dma_controller_create(struct musb *musb, void __iomem *base)
 {
 	struct musb_dma_controller *controller;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 5fdb9da..d8c6aeb 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -435,7 +435,7 @@ static const struct musb_platform_ops omap2430_ops = {
 
 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
 
-static int __devinit omap2430_probe(struct platform_device *pdev)
+static int omap2430_probe(struct platform_device *pdev)
 {
 	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
 	struct platform_device		*musb;
-- 
1.7.12


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [PATCH] musb: Kill __init from function that are called at other times as well.
  2012-09-06 13:04 ` Felipe Balbi
@ 2012-09-06 14:58   ` Pantelis Antoniou
  2012-09-06 17:07     ` Felipe Balbi
  0 siblings, 1 reply; 9+ messages in thread
From: Pantelis Antoniou @ 2012-09-06 14:58 UTC (permalink / raw)
  To: balbi; +Cc: linux-omap, USB list, Russ Dill

Hi Felipe,

A proper answer required some instrumentation printks().

So what I did is that I peppered each function marked with a removed
__init or __devinit with a 

> printk(KERN_INFO "%s:%d (%s) %s\n", __FILE__, __LINE__, KBUILD_MODNAME, __func__);
> 

Both omap2430 & musb_hdrc are compiled as module, and I issued the following 
commands on a beagleboard xm.

# modprobe omap2430
# modprobe g_mass_storage file=backing_file
# rmmod g_mass_storage
# rmmod omap2430
# modprobe omap2430

The problem is obvious when you see that functions marked as init or devinit are
called when re-loading the omap2430 module again. Those functions if marked as
much can (and will as I have witnessed) be removed from memory, leading to a 
crash.

What do you think?

Regards

-- Pantelis


On Sep 6, 2012, at 4:04 PM, Felipe Balbi wrote:

> On Thu, Sep 06, 2012 at 05:01:46PM +0300, Pantelis Antoniou wrote:
>> Marking functions as __init or __devinit and calling them at other times
>> leads to predictable crashes (if you're lucky).
>> 
>> Remove them for now.
>> 
>> Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
>> ---
>> drivers/usb/musb/musb_core.c    | 16 ++++++++--------
>> drivers/usb/musb/musb_debugfs.c |  2 +-
>> drivers/usb/musb/musb_dma.h     |  2 +-
>> drivers/usb/musb/musb_gadget.c  |  6 +++---
>> drivers/usb/musb/musbhsdma.c    |  2 +-
>> drivers/usb/musb/omap2430.c     |  2 +-
>> 6 files changed, 15 insertions(+), 15 deletions(-)
>> 
>> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
>> index 26f1bef..215d2d5 100644
>> --- a/drivers/usb/musb/musb_core.c
>> +++ b/drivers/usb/musb/musb_core.c
>> @@ -1160,7 +1160,7 @@ static struct musb_fifo_cfg __devinitdata mode_5_cfg[] = {
>>  *
>>  * returns negative errno or offset for next fifo.
>>  */
>> -static int __devinit
>> +static int
>> fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
>> 		const struct musb_fifo_cfg *cfg, u16 offset)
> 
> Are you sure all these functions are called from outside .init.text ? At
> least fifo_setup(), ep_config_from_table() and musb_core_init() are only
> during probe(), which sits in .init.text too.
> 
> -- 
> balbi


Log...

> root@beagleboard:~# modprobe omap2430 
> [  114.643920] drivers/usb/musb/omap2430.c:584 (omap2430) omap2430_init
> [  114.650939] drivers/usb/musb/omap2430.c:445 (omap2430) omap2430_probe
> [  114.792205] drivers/usb/musb/musb_core.c:2409 (musb_hdrc) musb_init
> [  114.798889] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
> [  114.805358] drivers/usb/musb/musb_core.c:2118 (musb_hdrc) musb_probe
> [  114.812225] drivers/usb/musb/musb_core.c:1888 (musb_hdrc) musb_init_controller
> [  114.819824] drivers/usb/musb/musb_core.c:1813 (musb_hdrc) allocate_instance
> [  114.835723] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  114.841339] drivers/usb/musb/musbhsdma.c:391 (musb_hdrc) dma_controller_create
> [  114.848999] drivers/usb/musb/musb_core.c:1388 (musb_hdrc) musb_core_init
> [  114.856079] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
> [  114.867095] musb-hdrc: MHDRC RTL version 1.800 
> [  114.871887] drivers/usb/musb/musb_core.c:1246 (musb_hdrc) ep_config_from_table
> [  114.879486] musb-hdrc: setup fifo_mode 4
> [  114.883666] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.890319] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.897033] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.903686] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.910369] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.917083] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.923767] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.930480] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.937133] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.943817] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.950500] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.957183] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.963867] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.970550] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.977264] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.983947] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.990631] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  114.997314] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.003997] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.010711] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.017395] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.024078] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.030761] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.037475] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.044158] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.050842] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.057556] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.064239] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  115.070922] musb-hdrc: 28/31 max ep, 16384/16384 memory
> [  115.076599] drivers/usb/musb/musb_gadget.c:1879 (musb_hdrc) musb_gadget_setup
> [  115.084136] drivers/usb/musb/musb_gadget.c:1842 (musb_hdrc) musb_g_init_endpoints
> [  115.092010] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.099609] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.107238] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.114837] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.122406] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.130035] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.137634] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.145233] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.152832] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.160461] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.168060] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.175689] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.183288] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.190948] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.198516] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.206146] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.213775] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.221374] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.229003] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.236633] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.244232] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.251861] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.259460] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.267089] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.274688] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.282287] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.289916] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.297546] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  115.307617] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
> [  115.324279] twl4030_usb twl4030_usb: twl4030_phy_suspend
> 
> root@beagleboard:~# lsmod
> Module                  Size  Used by
> musb_hdrc              53393  0 
> omap2430                5518  0 
> root@beagleboard:~# modprobe g_mass_storage file=backing_file
> [  138.156799] udc musb-hdrc: registering UDC driver [g_mass_storage]
> [  138.163330]  gadget: adding config #1 'Linux File-Backed Storage'/bf0217e8
> [  138.171966]  lun0: open backing file: backing_file
> [  138.182464]  gadget: Mass Storage Function, version: 2009/09/11
> [  138.188812]  gadget: Number of LUNs=1
> [  138.192901]  lun0: LUN: file: /home/root/backing_file
> [  138.198272]  gadget: I/O thread pid: 1976
> [  138.202484]  gadget: adding 'Mass Storage Function'/ddda81c0 to config 'Linux File-Backed Storage'/bf0217e8
> [  138.212799]  gadget: cfg 1/bf0217e8 speeds: high full
> [  138.218109]  gadget:   interface 0 = Mass Storage Function/ddda81c0
> [  138.224731]  gadget: Mass Storage Gadget, version: 2009/09/11
> [  138.230804]  gadget: userspace failed to provide iSerialNumber
> [  138.236968]  gadget: g_mass_storage ready[  138.252227] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  138.252441] musb-hdrc musb-hdrc: MUSB HDRC host driver
> [  138.254364] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
> [  138.254821] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [  138.254852] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [  138.254852] usb usb2: Product: MUSB HDRC host driver
> [  138.254852] usb usb2: Manufacturer: Linux 3.6.0-rc4-01179-g83ccc22-dirty musb-hcd
> [  138.254882] usb usb2: SerialNumber: musb-hdrc
> [  138.257629] hub 2-0:1.0: USB hub found
> [  138.257843] hub 2-0:1.0: 1 port detected
> [  138.347778] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3
> [  138.670959] twl4030_usb twl4030_usb: HW_CONDITIONS 0x40/64; link 4
> [  138.680175] twl4030_usb twl4030_usb: twl4030_phy_suspend
> 
> root@beagleboard:~# rmmod g_mass_storage
> [  144.341522] g_mass_storage musb-hdrc: unregistering UDC driver [musb-hdrc]
> [  144.360473] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  144.366333]  gadget: unbind function 'Mass Storage Function'/ddda81c0
> [  144.373199]  gadget: unbind
> [  144.381652] twl4030_usb twl4030_usb: twl4030_phy_suspend
> [  144.389312]  lun0: close backing file
> [  144.400421] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  144.406036] musb-hdrc musb-hdrc: remove, state 4
> [  144.411590] usb usb2: USB disconnect, device number 1
> [  144.429382] musb-hdrc musb-hdrc: USB bus 2 deregistered
> [  144.464599] twl4030_usb twl4030_usb: twl4030_phy_suspend
> root@beagleboard:~# rmmod omap2430 
> [  148.530517] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  148.540649] twl4030_usb twl4030_usb: twl4030_phy_suspend
> [  148.552124] udc musb-hdrc: releasing 'musb-hdrc'
> root@beagleboard:~# modprobe omap2430 
> [  154.626739] drivers/usb/musb/omap2430.c:584 (omap2430) omap2430_init
> [  154.633728] drivers/usb/musb/omap2430.c:445 (omap2430) omap2430_probe
> [  154.640533] musb-omap2430 musb-omap2430: Unbalanced pm_runtime_enable!
> [  154.647918] drivers/usb/musb/musb_core.c:2118 (musb_hdrc) musb_probe
> [  154.654663] drivers/usb/musb/musb_core.c:1888 (musb_hdrc) musb_init_controller
> [  154.662292] drivers/usb/musb/musb_core.c:1813 (musb_hdrc) allocate_instance
> [  154.698333] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  154.704010] drivers/usb/musb/musbhsdma.c:391 (musb_hdrc) dma_controller_create
> [  154.711761] drivers/usb/musb/musb_core.c:1388 (musb_hdrc) musb_core_init
> [  154.718811] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
> [  154.729888] musb-hdrc: MHDRC RTL version 1.800 
> [  154.734680] drivers/usb/musb/musb_core.c:1246 (musb_hdrc) ep_config_from_table
> [  154.742279] musb-hdrc: setup fifo_mode 4
> [  154.746398] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.753082] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.759765] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.766479] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.773162] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.779846] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.786529] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.793212] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.799926] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.806640] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.813323] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.819976] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.826660] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.833343] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.840026] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.846710] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.853393] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.860107] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.866760] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.873443] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.880126] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.886840] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.893524] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.900207] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.906860] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.913513] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.920196] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.926879] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  154.933593] musb-hdrc: 28/31 max ep, 16384/16384 memory
> [  154.939331] drivers/usb/musb/musb_gadget.c:1879 (musb_hdrc) musb_gadget_setup
> [  154.946838] drivers/usb/musb/musb_gadget.c:1842 (musb_hdrc) musb_g_init_endpoints
> [  154.954742] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  154.962341] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  154.969909] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  154.977539] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  154.985137] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  154.992736] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.000305] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.007904] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.015472] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.023071] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.030700] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.038269] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.045898] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.053497] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.061096] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.068695] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.076293] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.083923] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.091522] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.099090] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.106689] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.114318] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.121917] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.129486] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.137084] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.144683] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.152282] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.159881] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  155.169403] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
> [  155.198974] twl4030_usb twl4030_usb: twl4030_phy_suspend
> 


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH] musb: Kill __init from function that are called at other times as well.
  2012-09-06 14:58   ` Pantelis Antoniou
@ 2012-09-06 17:07     ` Felipe Balbi
       [not found]       ` <20120906170740.GB17754-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
  0 siblings, 1 reply; 9+ messages in thread
From: Felipe Balbi @ 2012-09-06 17:07 UTC (permalink / raw)
  To: Pantelis Antoniou; +Cc: balbi, linux-omap, USB list, Russ Dill

[-- Attachment #1: Type: text/plain, Size: 1088 bytes --]

Hi,

On Thu, Sep 06, 2012 at 05:58:27PM +0300, Pantelis Antoniou wrote:
> Hi Felipe,
> 
> A proper answer required some instrumentation printks().
> 
> So what I did is that I peppered each function marked with a removed
> __init or __devinit with a 
> 
> > printk(KERN_INFO "%s:%d (%s) %s\n", __FILE__, __LINE__, KBUILD_MODNAME, __func__);
> > 
> 
> Both omap2430 & musb_hdrc are compiled as module, and I issued the following 
> commands on a beagleboard xm.
> 
> # modprobe omap2430
> # modprobe g_mass_storage file=backing_file
> # rmmod g_mass_storage
> # rmmod omap2430
> # modprobe omap2430
> 
> The problem is obvious when you see that functions marked as init or devinit are
> called when re-loading the omap2430 module again. Those functions if marked as
> much can (and will as I have witnessed) be removed from memory, leading to a 
> crash.
> 
> What do you think?

the problem would be with usage of __init. __devinit will only drop
.devinit.text if HOTPLUG and MODULE isn't set, AFAICT. I also can't see
a crash on below logs.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH] musb: Kill __init from function that are called at other times as well.
       [not found]       ` <20120906170740.GB17754-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
@ 2012-09-06 17:36         ` Pantelis Antoniou
       [not found]           ` <7CED20FA-3501-40ED-B289-28FDC04FCF20-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>
  0 siblings, 1 reply; 9+ messages in thread
From: Pantelis Antoniou @ 2012-09-06 17:36 UTC (permalink / raw)
  To: balbi-l0cyMroinI0; +Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA, USB list, Russ Dill

Hi Felipe

I see about __devinit.
There's no crash because in those logs the __init modifiers are gone.

Regards

-- Pantelis


On Sep 6, 2012, at 8:07 PM, Felipe Balbi wrote:

> Hi,
> 
> On Thu, Sep 06, 2012 at 05:58:27PM +0300, Pantelis Antoniou wrote:
>> Hi Felipe,
>> 
>> A proper answer required some instrumentation printks().
>> 
>> So what I did is that I peppered each function marked with a removed
>> __init or __devinit with a 
>> 
>>> printk(KERN_INFO "%s:%d (%s) %s\n", __FILE__, __LINE__, KBUILD_MODNAME, __func__);
>>> 
>> 
>> Both omap2430 & musb_hdrc are compiled as module, and I issued the following 
>> commands on a beagleboard xm.
>> 
>> # modprobe omap2430
>> # modprobe g_mass_storage file=backing_file
>> # rmmod g_mass_storage
>> # rmmod omap2430
>> # modprobe omap2430
>> 
>> The problem is obvious when you see that functions marked as init or devinit are
>> called when re-loading the omap2430 module again. Those functions if marked as
>> much can (and will as I have witnessed) be removed from memory, leading to a 
>> crash.
>> 
>> What do you think?
> 
> the problem would be with usage of __init. __devinit will only drop
> .devinit.text if HOTPLUG and MODULE isn't set, AFAICT. I also can't see
> a crash on below logs.
> 
> -- 
> balbi

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH] musb: Kill __init from function that are called at other times as well.
       [not found]           ` <7CED20FA-3501-40ED-B289-28FDC04FCF20-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>
@ 2012-09-06 17:37             ` Felipe Balbi
  2012-09-06 17:42               ` Pantelis Antoniou
  0 siblings, 1 reply; 9+ messages in thread
From: Felipe Balbi @ 2012-09-06 17:37 UTC (permalink / raw)
  To: Pantelis Antoniou
  Cc: balbi-l0cyMroinI0, linux-omap-u79uwXL29TY76Z2rM5mHXA, USB list,
	Russ Dill

[-- Attachment #1: Type: text/plain, Size: 250 bytes --]

Hi,

On Thu, Sep 06, 2012 at 08:36:39PM +0300, Pantelis Antoniou wrote:
> Hi Felipe
> 
> I see about __devinit.
> There's no crash because in those logs the __init modifiers are gone.

it'd be cool to see the crash, though ;-)

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH] musb: Kill __init from function that are called at other times as well.
  2012-09-06 17:42               ` Pantelis Antoniou
@ 2012-09-06 17:41                 ` Felipe Balbi
       [not found]                   ` <20120906174139.GF30717-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
  0 siblings, 1 reply; 9+ messages in thread
From: Felipe Balbi @ 2012-09-06 17:41 UTC (permalink / raw)
  To: Pantelis Antoniou; +Cc: balbi, linux-omap, USB list, Russ Dill

[-- Attachment #1: Type: text/plain, Size: 807 bytes --]

Hi,

On Thu, Sep 06, 2012 at 08:42:56PM +0300, Pantelis Antoniou wrote:
> 
> On Sep 6, 2012, at 8:37 PM, Felipe Balbi wrote:
> 
> > Hi,
> > 
> > On Thu, Sep 06, 2012 at 08:36:39PM +0300, Pantelis Antoniou wrote:
> >> Hi Felipe
> >> 
> >> I see about __devinit.
> >> There's no crash because in those logs the __init modifiers are gone.
> > 
> > it'd be cool to see the crash, though ;-)
> > 
> > -- 
> > balbi
> 
> Heh, OK,
> 
> My word is not enough? :)
> 
> Gimme a few minutes...

Didn't say that, but I don't know what issue you're talking about since
__devinit is supposed to keep .devinit.text intact unless !HOTPLUG.

This could be a bug on some linker script (though unlikely) just trying
to get understand the issue before I apply the patch, that's all.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH] musb: Kill __init from function that are called at other times as well.
  2012-09-06 17:37             ` Felipe Balbi
@ 2012-09-06 17:42               ` Pantelis Antoniou
  2012-09-06 17:41                 ` Felipe Balbi
  0 siblings, 1 reply; 9+ messages in thread
From: Pantelis Antoniou @ 2012-09-06 17:42 UTC (permalink / raw)
  To: balbi; +Cc: linux-omap, USB list, Russ Dill


On Sep 6, 2012, at 8:37 PM, Felipe Balbi wrote:

> Hi,
> 
> On Thu, Sep 06, 2012 at 08:36:39PM +0300, Pantelis Antoniou wrote:
>> Hi Felipe
>> 
>> I see about __devinit.
>> There's no crash because in those logs the __init modifiers are gone.
> 
> it'd be cool to see the crash, though ;-)
> 
> -- 
> balbi

Heh, OK,

My word is not enough? :)

Gimme a few minutes...

-- Pantelis


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH] musb: Kill __init from function that are called at other times as well.
       [not found]                   ` <20120906174139.GF30717-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
@ 2012-09-06 18:58                     ` Pantelis Antoniou
  0 siblings, 0 replies; 9+ messages in thread
From: Pantelis Antoniou @ 2012-09-06 18:58 UTC (permalink / raw)
  To: balbi-l0cyMroinI0; +Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA, USB list, Russ Dill

Hi Felipe,

On Sep 6, 2012, at 8:41 PM, Felipe Balbi wrote:

> Hi,
> 
> On Thu, Sep 06, 2012 at 08:42:56PM +0300, Pantelis Antoniou wrote:
>> 
>> On Sep 6, 2012, at 8:37 PM, Felipe Balbi wrote:
>> 
>>> Hi,
>>> 
>>> On Thu, Sep 06, 2012 at 08:36:39PM +0300, Pantelis Antoniou wrote:
>>>> Hi Felipe
>>>> 
>>>> I see about __devinit.
>>>> There's no crash because in those logs the __init modifiers are gone.
>>> 
>>> it'd be cool to see the crash, though ;-)
>>> 
>>> -- 
>>> balbi
>> 
>> Heh, OK,
>> 
>> My word is not enough? :)
>> 
>> Gimme a few minutes...
> 
> Didn't say that, but I don't know what issue you're talking about since
> __devinit is supposed to keep .devinit.text intact unless !HOTPLUG.
> 
> This could be a bug on some linker script (though unlikely) just trying
> to get understand the issue before I apply the patch, that's all.
> 
> -- 
> balbi

With my init removal patch reverted, but with the instrumentation printk still in
Board hanged this time. It is not certain you will crash, you might get a hang or
anything else. It all depends on what kind of garbage is there in memory when you
start calling into the void.

The results are boundedly undefined :)

Regards

-- Pantelis
  
 
> root@beagleboard:~# modprobe omap2430
> [  119.741851] drivers/usb/musb/omap2430.c:584 (omap2430) omap2430_init
> [  119.748870] drivers/usb/musb/omap2430.c:445 (omap2430) omap2430_probe
> root@beagleboard:~# [  119.797760] drivers/usb/musb/musb_core.c:2409 (musb_hdrc) musb_init
> [  119.804504] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
> [  119.811004] drivers/usb/musb/musb_core.c:2118 (musb_hdrc) musb_probe
> [  119.817962] drivers/usb/musb/musb_core.c:1888 (musb_hdrc) musb_init_controller
> [  119.825622] drivers/usb/musb/musb_core.c:1813 (musb_hdrc) allocate_instance
> [  119.841735] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  119.847290] drivers/usb/musb/musbhsdma.c:391 (musb_hdrc) dma_controller_create
> [  119.855041] drivers/usb/musb/musb_core.c:1388 (musb_hdrc) musb_core_init
> [  119.862121] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
> [  119.873229] musb-hdrc: MHDRC RTL version 1.800 
> [  119.877990] drivers/usb/musb/musb_core.c:1246 (musb_hdrc) ep_config_from_table
> [  119.885620] musb-hdrc: setup fifo_mode 4
> [  119.889801] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.896514] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.903228] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.909912] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.916625] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.923339] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.930084] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.936798] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.943542] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.950256] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.956939] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.963653] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.970367] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.977081] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.983825] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.990539] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  119.997253] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.003936] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.010650] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.017364] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.024078] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.030792] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.037536] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.044250] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.050933] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.057678] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.064392] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.071105] drivers/usb/musb/musb_core.c:1173 (musb_hdrc) fifo_setup
> [  120.077819] musb-hdrc: 28/31 max ep, 16384/16384 memory
> [  120.083587] drivers/usb/musb/musb_gadget.c:1879 (musb_hdrc) musb_gadget_setup
> [  120.091156] drivers/usb/musb/musb_gadget.c:1842 (musb_hdrc) musb_g_init_endpoints
> [  120.099060] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.106689] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.114318] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.121948] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.129608] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.137237] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.144866] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.152465] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.160095] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.167724] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.175354] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.182983] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.190612] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.198272] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.205902] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.213531] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.221160] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.228790] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.236419] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.244049] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.251678] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.259338] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.266967] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.274597] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.282196] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.289855] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.297485] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.305114] drivers/usb/musb/musb_gadget.c:1803 (musb_hdrc) init_peripheral_ep
> [  120.315155] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
> [  120.415344] twl4030_usb twl4030_usb: twl4030_phy_suspend
> 
> INIT: Id "S" respawning too fast: disabled for 5 minutes
> ing_file
> [  132.275848] udc musb-hdrc: registering UDC driver [g_mass_storage]
> [  132.282501]  gadget: adding config #1 'Linux File-Backed Storage'/bf0207e8
> [  132.291137]  lun0: open backing file: backing_file
> [  132.304260]  gadget: Mass Storage Function, version: 2009/09/11
> [  132.310638]  gadget: Number of LUNs=1
> [  132.314758]  lun0: LUN: file: /home/root/backing_file
> [  132.320129]  gadget: I/O thread pid: 1979
> [  132.324371]  gadget: adding 'Mass Storage Function'/d7d6b740 to config 'Linux File-Backed Storage'/bf0207e8
> [  132.334686]  gadget: cfg 1/bf0207e8 speeds: high full
> [  132.339996]  gadget:   interface 0 = Mass Storage Function/d7d6b740
> [  132.346649]  gadget: Mass Storage Gadget, version: 2009/09/11
> [  132.352752]  gadget: userspace failed to provide iSerialNumber
> [  132.358978]  gadget: g_mass_storage ready
> [  132.375366] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  132.375549] musb-hdrc musb-hdrc: MUSB HDRC host driver
> [  132.377777] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
> [  132.378295] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [  132.378326] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [  132.378326] usb usb2: Product: MUSB HDRC host driver
> [  132.378356] usb usb2: Manufacturer: Linux 3.6.0-rc4-01179-g83ccc22-dirty musb-hcd
> [  132.378356] usb usb2: SerialNumber: musb-hdrc
> [  132.381072] hub 2-0:1.0: USB hub found
> [  132.381256] hub 2-0:1.0: 1 port detected
> root@beagleboard:~# [  132.471069] twl4030_usb twl4030_usb: HW_CONDITIONS 0xc0/192; link 3
> [  132.797393] twl4030_usb twl4030_usb: HW_CONDITIONS 0x40/64; link 4
> [  132.806701] twl4030_usb twl4030_usb: twl4030_phy_suspend
> 
> root@beagleboard:~# rmmod g_mass_storage
> [  139.405426] g_mass_storage musb-hdrc: unregistering UDC driver [musb-hdrc]
> [  139.424591] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  139.430450]  gadget: unbind function 'Mass Storage Function'/d7d6b740
> [  139.437316]  gadget: unbind
> [  139.445831] twl4030_usb twl4030_usb: twl4030_phy_suspend
> [  139.453552]  lun0: close backing file
> [  139.464691] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  139.470336] musb-hdrc musb-hdrc: remove, state 4
> [  139.475921] usb usb2: USB disconnect, device number 1
> [  139.493743] musb-hdrc musb-hdrc: USB bus 2 deregistered
> [  139.534484] twl4030_usb twl4030_usb: twl4030_phy_suspend
> root@beagleboard:~# rmmod omap2430 
> [  144.525634] twl4030_usb twl4030_usb: twl4030_phy_resume
> [  144.534027] twl4030_usb twl4030_usb: twl4030_phy_suspend
> [  144.545501] udc musb-hdrc: releasing 'musb-hdrc'
> root@beagleboard:~# modprobe omap2430
> [  147.650756] drivers/usb/musb/omap2430.c:584 (omap2430) omap2430_init
> [  147.657806] drivers/usb/musb/omap2430.c:445 (omap2430) omap2430_probe
> [  147.664703] musb-omap2430 musb-omap2430: Unbalanced pm_runtime_enable!
> [  147.672119] drivers/usb/musb/musb_core.c:2118 (musb_hdrc) musb_probe
> [  147.678833] drivers/usb/musb/musb_core.c:1888 (musb_hdrc) musb_init_controller
> [  147.686523] drivers/usb/musb/musb_core.c:1813 (musb_hdrc) allocate_instance
> 

<HANG>--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2012-09-06 18:58 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-09-06 14:01 [PATCH] musb: Kill __init from function that are called at other times as well Pantelis Antoniou
2012-09-06 13:04 ` Felipe Balbi
2012-09-06 14:58   ` Pantelis Antoniou
2012-09-06 17:07     ` Felipe Balbi
     [not found]       ` <20120906170740.GB17754-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-09-06 17:36         ` Pantelis Antoniou
     [not found]           ` <7CED20FA-3501-40ED-B289-28FDC04FCF20-wVdstyuyKrO8r51toPun2/C9HSW9iNxf@public.gmane.org>
2012-09-06 17:37             ` Felipe Balbi
2012-09-06 17:42               ` Pantelis Antoniou
2012-09-06 17:41                 ` Felipe Balbi
     [not found]                   ` <20120906174139.GF30717-S8G//mZuvNWo5Im9Ml3/Zg@public.gmane.org>
2012-09-06 18:58                     ` Pantelis Antoniou

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.