[PATCH] bt-enable: Add bt-enable recipe

* [PATCH] bt-enable: Add bt-enable recipe
@ 2012-10-05 19:27 Franklin S. Cooper Jr
  2012-10-06  7:43 ` Koen Kooi
  0 siblings, 1 reply; 8+ messages in thread
From: Franklin S. Cooper Jr @ 2012-10-05 19:27 UTC (permalink / raw)
  To: meta-ti

* Port bt-enable recipe from arago.
* Bt-enable is used to enable the BT module on the TI wl12xx
  Wi-Fi + Bluetooth module.

Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
---
Version 2 changes:
Loosen up COMPATIBLE_MACHINE restriction. Using generic SOC family when
possible.
 
...kefile-Update-makefile-to-work-well-in-OE.patch |   78 ++++++++++++++++++++
 recipes-bsp/bt-enable/bt-enable_1.0.bb             |   41 ++++++++++
 2 files changed, 119 insertions(+), 0 deletions(-)
 create mode 100644 recipes-bsp/bt-enable/bt-enable/0001-Makefile-Update-makefile-to-work-well-in-OE.patch
 create mode 100644 recipes-bsp/bt-enable/bt-enable_1.0.bb

diff --git a/recipes-bsp/bt-enable/bt-enable/0001-Makefile-Update-makefile-to-work-well-in-OE.patch b/recipes-bsp/bt-enable/bt-enable/0001-Makefile-Update-makefile-to-work-well-in-OE.patch
new file mode 100644
index 0000000..7e6756c
--- /dev/null
+++ b/recipes-bsp/bt-enable/bt-enable/0001-Makefile-Update-makefile-to-work-well-in-OE.patch
@@ -0,0 +1,78 @@
+From a400ac3d83023a66a356d056899d6b380cb30473 Mon Sep 17 00:00:00 2001
+From: Chase Maupin <Chase.Maupin@ti.com>
+Date: Wed, 7 Mar 2012 10:51:43 -0600
+Subject: [PATCH] Makefile: Update makefile to work with OE
+
+* Updated the makefile to with OE
+* Use the kernel install target for installing the module
+
+Upstream-Status: Pending
+    * will be in next release
+
+Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
+---
+ Makefile |   45 ++++++++++++++++++++++++++++++++++++++++-----
+ 1 files changed, 40 insertions(+), 5 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index ebbcd11..b17d33e 100755
+--- a/Makefile
++++ b/Makefile
+@@ -7,15 +7,50 @@ else
+   EXTRA_CFLAGS += -O2
+ endif
+
++-include ../../../Rules.make
++
++# If KERNEL_DIR is not set then use the default in Rules.make
++KERNEL_DIR ?= ${LINUXKERNEL_INSTALL_DIR}
++DEST_DIR ?= ${DESTDIR}
++
++PLATFORM ?= "unknown"
++MACHINE_NAME ?= "unknown"
++
++# Use the PLATFORM value from the Rules.make if it was sourced
++ifeq ($(PLATFORM), am335x-evm)
++    MACHINE_NAME := "am335x"
++endif
++ifeq ($(PLATFORM), am180x-evm)
++    MACHINE_NAME := "am1808"
++endif
++ifeq ($(PLATFORM), da850-omapl138-evm)
++    MACHINE_NAME := "am1808"
++endif
++ifeq ($(PLATFORM), am37x-evm)
++    MACHINE_NAME := "omap3evm"
++endif
++
++# If CROSS_COMPILE is not set by Rules.make then set a sane default
++CROSS_COMPILE ?= arm-arago-linux-gnueabi-
++export CROSS_COMPILE
++
++# set the INSTALL_MOD_DIR so that the executables won't be placed in extra
++INSTALL_MOD_DIR = kernel/drivers/bt_enable
++export INSTALL_MOD_DIR
++
+ obj-m := gpio_en.o
+
++MAKE_ENV = ARCH=arm
++
+ PWD := $(shell pwd)
+ all:
+-	pwd
+-	@echo EXTRA_CFLAGS = $(EXTRA_CFLAGS)
+-	$(MAKE) CROSS_COMPILE=$(CROSS_COMPILE) ARCH=$(ARCH) EXTRA_CFLAGS="$(EXTRA_CFLAGS)" -C $(KERNEL_DIR) M=$(PWD) modules
++	@cp -f gpio_en_${MACHINE_NAME}.c gpio_en.c
++	$(MAKE) EXTRA_CFLAGS="$(EXTRA_CFLAGS)" -C $(KERNEL_DIR) $(MAKE_ENV) \
++    M=$(PWD) modules
++
+ install:
+-	install -d ${DEST_DIR}${BASE_LIB_DIR}/modules/${KRNL_VER}/kernel/drivers/bt_enable
+-	install -m 0755 ./gpio_en.ko ${DEST_DIR}${BASE_LIB_DIR}/modules/${KRNL_VER}/kernel/drivers/bt_enable
++	$(MAKE) EXTRA_CFLAGS="$(EXTRA_CFLAGS)" -C $(KERNEL_DIR) $(MAKE_ENV) \
++    M=$(PWD) INSTALL_MOD_PATH="${DEST_DIR}" modules_install
++
+ clean:
+	rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c .tmp_versions *.symvers
+--
+1.7.0.4
diff --git a/recipes-bsp/bt-enable/bt-enable_1.0.bb b/recipes-bsp/bt-enable/bt-enable_1.0.bb
new file mode 100644
index 0000000..b6f1ee7
--- /dev/null
+++ b/recipes-bsp/bt-enable/bt-enable_1.0.bb
@@ -0,0 +1,41 @@
+DESCRIPTION = "BT GPIO Enable"
+LICENSE = "BSD"
+COMPATIBLE_MACHINE = "omap3|omapl138|da850-omapl138-evm|ti33x"
+LIC_FILES_CHKSUM = "file://gpio_en_am1808.c;beginline=1;endline=34;md5=fe94639d8f61c867d1bc4bf61473d3cd \
+                    file://gpio_en_am335x.c;beginline=1;endline=34;md5=fe94639d8f61c867d1bc4bf61473d3cd \
+                    file://gpio_en_omap3evm.c;beginline=1;endline=34;md5=fe94639d8f61c867d1bc4bf61473d3cd \
+"
+
+DEPENDS = "virtual/kernel"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+PACKAGE_STRIP = "no"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "r0+gitr${SRCREV}"
+
+SRCREV = "97c4600ff7d39f1cc6079939248cd9ed15100db4"
+
+SRC_URI = "git://github.com/TI-ECS/bt_enable.git;protocol=git \
+           file://0001-Makefile-Update-makefile-to-work-well-in-OE.patch \
+          "
+
+PLATFORM = "unknown"
+PLATFORM_ti33x = "am335x-evm"
+PLATFORM_omap3 = "am37x-evm"
+PLATFORM_omapl138 = "am180x-evm"
+PLATFORM_da850-omapl138-evm = "am180x-evm"
+
+S = "${WORKDIR}/git"
+
+EXTRA_OEMAKE = " \
+	KERNEL_DIR=${STAGING_KERNEL_DIR} \
+    PLATFORM=${PLATFORM} \
+"
+
+do_install () {
+	oe_runmake 'DEST_DIR=${D}' install
+}
-- 
1.7.0.4



^ permalink raw reply related	[flat|nested] 8+ messages in thread