All of lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH v9 01/10] host-qemu: new package
@ 2012-10-06 13:53 Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 02/10] perl: " Francois Perrad
                   ` (8 more replies)
  0 siblings, 9 replies; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

only user mode for the current target architecture

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/qemu/qemu.mk |   82 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 package/qemu/qemu.mk

diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
new file mode 100644
index 0000000..de72e04
--- /dev/null
+++ b/package/qemu/qemu.mk
@@ -0,0 +1,82 @@
+#############################################################
+#
+# qemu
+#
+#############################################################
+
+QEMU_VERSION = 1.2.0
+QEMU_SOURCE = qemu-$(QEMU_VERSION).tar.bz2
+QEMU_SITE = http://wiki.qemu.org/download
+
+#       BR ARCH         qemu
+#       -------         ----
+#       arm             arm
+#       armeb           armeb
+#       avr32           not supported
+#       bfin            not supported
+#       i386            i386
+#       i486            i386
+#       i586            i386
+#       i686            i386
+#       x86_64          x86_64
+#       m68k            m68k
+#       microblaze      microblaze
+#       mips            mips
+#       mipsel          mipsel
+#       mips64          ?
+#       mips64el        ?
+#       powerpc         ppc
+#       sh2             not supported
+#       sh2a            not supported
+#       sh3             not supported
+#       sh3eb           not supported
+#       sh4             sh4
+#       sh4eb           sh4eb
+#       sh4a            ?
+#       sh4aeb          ?
+#       sh64            not supported
+#       sparc           sparc
+
+QEMU_ARCH = $(ARCH)
+ifeq ($(QEMU_ARCH),i486)
+    QEMU_ARCH = i386
+endif
+ifeq ($(QEMU_ARCH),i586)
+    QEMU_ARCH = i386
+endif
+ifeq ($(QEMU_ARCH),i686)
+    QEMU_ARCH = i386
+endif
+ifeq ($(QEMU_ARCH),powerpc)
+    QEMU_ARCH = ppc
+endif
+HOST_QEMU_TARGETS=$(QEMU_ARCH)-linux-user
+
+define HOST_QEMU_CONFIGURE_CMDS
+	(cd $(@D); ./configure                          \
+		--target-list="$(HOST_QEMU_TARGETS)"    \
+		--prefix="$(HOST_DIR)/usr"              \
+		--interp-prefix=$(STAGING_DIR)          \
+		--cc="$(HOSTCC)"                        \
+		--host-cc="$(HOSTCC)"                   \
+		--extra-cflags="$(HOST_CFLAGS)"         \
+		--extra-ldflags="$(HOST_LDFLAGS)"       \
+	)
+endef
+
+define HOST_QEMU_BUILD_CMDS
+	$(MAKE) -C $(@D) all
+endef
+
+define HOST_QEMU_INSTALL_CMDS
+	$(MAKE) -C $(@D) install
+endef
+
+define HOST_QEMU_CLEAN_CMDS
+	$(MAKE) -C $(@D) clean
+endef
+
+$(eval $(host-generic-package))
+
+# variable used by other packages
+QEMU_USER = $(HOST_DIR)/usr/bin/qemu-$(QEMU_ARCH)
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 02/10] perl: new package
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  2012-10-08  9:34   ` Thomas Petazzoni
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 03/10] perl: add DB_File Francois Perrad
                   ` (7 subsequent siblings)
  8 siblings, 1 reply; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/Config.in                      |    1 +
 package/perl/Config.in                 |   19 +++++++
 package/perl/perl-configure-qemu.patch |   53 ++++++++++++++++++
 package/perl/perl-make-ext.patch       |   24 +++++++++
 package/perl/perl-mkppport.patch       |   37 +++++++++++++
 package/perl/perl.mk                   |   92 ++++++++++++++++++++++++++++++++
 6 files changed, 226 insertions(+)
 create mode 100644 package/perl/Config.in
 create mode 100644 package/perl/perl-configure-qemu.patch
 create mode 100644 package/perl/perl-make-ext.patch
 create mode 100644 package/perl/perl-mkppport.patch
 create mode 100644 package/perl/perl.mk

diff --git a/package/Config.in b/package/Config.in
index f308de7..00a79ab 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -262,6 +262,7 @@ source "package/wsapi/Config.in"
 source "package/xavante/Config.in"
 endmenu
 endif
+source "package/perl/Config.in"
 source "package/microperl/Config.in"
 source "package/php/Config.in"
 source "package/python/Config.in"
diff --git a/package/perl/Config.in b/package/perl/Config.in
new file mode 100644
index 0000000..096159f
--- /dev/null
+++ b/package/perl/Config.in
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_PERL
+	bool "perl"
+	depends on !BR2_avr32
+	depends on !BR2_bfin
+	depends on !BR2_sh2
+	depends on !BR2_sh2a
+	depends on !BR2_sh3
+	depends on !BR2_sh3eb
+	depends on !BR2_sh64
+	select BR2_PACKAGE_HOST_QEMU
+	help
+	  Larry Wall's Practical Extraction and Report Language
+	  An interpreted scripting language, known among some as "Unix's Swiss
+	  Army Chainsaw".
+
+	  http://www.perl.org/
+
+comment "perl requires an architecture supported by qemu"
+	depends on BR2_avr32 || BR2_bfin || BR2_sh2 || BR2_sh2a || BR2_sh3 || BR2_sh3eb || BR2_sh64
diff --git a/package/perl/perl-configure-qemu.patch b/package/perl/perl-configure-qemu.patch
new file mode 100644
index 0000000..c2d6b92
--- /dev/null
+++ b/package/perl/perl-configure-qemu.patch
@@ -0,0 +1,53 @@
+Add qemu support
+
+see https://rt.perl.org/rt3//Public/Bug/Display.html?id=114798
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/Configure
+===================================================================
+--- a/Configure
++++ b/Configure
+@@ -2837,6 +2837,9 @@
+             ;;
+         *)  echo "Using usrinc $usrinc." >&4 ;;
+ 	esac
++	case "$targetrun" in
++	*qemu*) targethost=dummy ;;
++	esac
+ 	case "$targethost" in
+ 	'') echo "Targethost not defined." >&4; croak=y ;;
+         *)  echo "Using targethost $targethost." >&4
+@@ -2868,7 +2871,7 @@
+ 	case "$targetfrom" in
+ 	'') targetfrom=scp ;;
+ 	esac
+-    	run=$run-$targetrun
++    	run=$run-`basename $targetrun`
+     	to=$to-$targetto
+     	from=$from-$targetfrom
+ 	case "$targetdir" in
+@@ -2908,6 +2911,14 @@
+ $targetrun -l $targetuser $targethost "cd \$cwd && ./\$exe \$@"
+ EOF
+ 	    ;;
++	*qemu*)
++	    to=:
++	    from=:
++	    cat >$run <<EOF
++#!/bin/sh
++$targetrun -L $qemulib "\$@"
++EOF
++	    ;;
+ 	*)  echo "Unknown targetrun '$targetrun'" >&4
+ 	    exit 1
+ 	    ;;
+@@ -5048,7 +5059,7 @@
+ echo " ";
+ echo "Checking if your compiler accepts $flag" 2>&1;
+ echo "int main(void) { return 0; }" > gcctest.c;
+-if $cc -O2 $flag -o gcctest gcctest.c 2>gcctest.out && ./gcctest; then
++if $cc -O2 $flag -o gcctest gcctest.c 2>gcctest.out && $run ./gcctest; then
+     echo "Yes, it does." 2>&1;
+     if $test -s gcctest.out ; then
+         echo "But your platform does not like it:";
diff --git a/package/perl/perl-make-ext.patch b/package/perl/perl-make-ext.patch
new file mode 100644
index 0000000..e0195e7
--- /dev/null
+++ b/package/perl/perl-make-ext.patch
@@ -0,0 +1,24 @@
+Don't use RUN with make (only for perl)
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/make_ext.pl
+===================================================================
+--- a/make_ext.pl
++++ b/make_ext.pl
+@@ -458,11 +458,13 @@
+ 	# Give makefile an opportunity to rewrite itself.
+ 	# reassure users that life goes on...
+ 	my @args = ('config', @$pass_through);
+-	system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
++#	system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
++	system(@make, @args) and print "@make @args failed, continuing anyway...\n";
+     }
+     my @targ = ($target, @$pass_through);
+     print "Making $target in $ext_dir\n at run @make @targ\n";
+-    my $code = system(@run, @make, @targ);
++#    my $code = system(@run, @make, @targ);
++    my $code = system(@make, @targ);
+     die "Unsuccessful make($ext_dir): code=$code" if $code != 0;
+ 
+     chdir $return_dir || die "Cannot cd to $return_dir: $!";
diff --git a/package/perl/perl-mkppport.patch b/package/perl/perl-mkppport.patch
new file mode 100644
index 0000000..97f27a2
--- /dev/null
+++ b/package/perl/perl-mkppport.patch
@@ -0,0 +1,37 @@
+Add RUN
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/mkppport
+===================================================================
+--- a/mkppport
++++ b/mkppport
+@@ -1,6 +1,7 @@
+ use strict;
+ use warnings;
+ 
++use Config;
+ use Getopt::Long;
+ use File::Spec;
+ use File::Compare qw( compare );
+@@ -136,14 +137,18 @@
+ #----------------------------------------------
+ sub run
+ {
++  my @run = $Config{run};
++  @run = () if not defined $run[0] or $run[0] eq '';
+   my @args = ("-I" . File::Spec->catdir((File::Spec->updir) x 2, 'lib'), @_);
+   my $run = $perl =~ m/\s/ ? qq("$perl") : $perl;
+   for (@args) {
+     $_ = qq("$_") if $^O eq 'VMS' && /^[^"]/;
+     $run .= " $_";
+   }
+-  print "running $run\n";
+-  system $run and die "$run failed: $?\n";
++#  print "running $run\n";
++#  system $run and die "$run failed: $?\n";
++  print "running ", join(' ', @run, $run), "\n";
++  system join(' ', @run, $run) and die "@run $run failed: $?\n";
+ }
+ 
+ __END__
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
new file mode 100644
index 0000000..b29e99f
--- /dev/null
+++ b/package/perl/perl.mk
@@ -0,0 +1,92 @@
+#############################################################
+#
+# perl
+#
+#############################################################
+
+PERL_VERSION_MAJOR = 16
+PERL_VERSION = 5.$(PERL_VERSION_MAJOR).1
+PERL_SITE = http://www.cpan.org/src/5.0
+PERL_SOURCE = perl-$(PERL_VERSION).tar.bz2
+PERL_LICENSE = Artistic
+PERL_LICENSE_FILES = Artistic
+PERL_INSTALL_STAGING = YES
+PERL_DEPENDENCIES = host-qemu
+
+PERL_CONF_OPT = -des \
+		-Dusecrosscompile \
+		-Dtargetrun=$(QEMU_USER) \
+		-Dqemulib=$(STAGING_DIR) \
+		-Dar="$(TARGET_AR)" \
+		-Dcc="$(TARGET_CC)" \
+		-Dcpp="$(TARGET_CC)" \
+		-Dld="$(TARGET_LD)" \
+		-Dnm="$(TARGET_NM)" \
+		-Dranlib="$(TARGET_RANLIB)" \
+		-Dccflags="$(TARGET_CFLAGS)" \
+		-Dldflags="$(TARGET_LDFLAGS) -lgcc_s -lm" \
+		-Dlddlflags="-shared" \
+		-Dlibc=$(STAGING_DIR)/lib/libc.so \
+		-Duseshrplib \
+		-Dprefix=/usr \
+		-Uoptimize
+
+ifeq ($(shell expr $(PERL_VERSION_MAJOR) % 2), 1)
+    PERL_CONF_OPT += -Dusedevel
+endif
+
+ifneq ($(BR2_LARGEFILE),y)
+    PERL_CONF_OPT += -Uuselargefiles
+endif
+
+define PERL_CONFIGURE_CMDS
+	rm -f $(@D)/config.sh
+	(cd $(@D); ./Configure $(PERL_CONF_OPT))
+	echo "# patched values"                 >>$(@D)/config.sh
+	$(SED) '/^myarchname=/d' \
+		-e '/^mydomain=/d' \
+		-e '/^myhostname=/d' \
+		-e '/^myuname=/d' \
+		-e '/^osname=/d' \
+		-e '/^osvers=/d' \
+		-e '/^perladmin=/d' \
+		$(@D)/config.sh
+	echo "myarchname='$(GNU_TARGET_NAME)'"                  >>$(@D)/config.sh
+	echo "mydomain=''"                                      >>$(@D)/config.sh
+	echo "myhostname='$(BR2_TARGET_GENERIC_HOSTNAME)'"      >>$(@D)/config.sh
+	echo "myuname='Buildroot $(BR2_VERSION_FULL)'"          >>$(@D)/config.sh
+	echo "osname='linux'"                                   >>$(@D)/config.sh
+	echo "osvers='$(BR2_LINUX_KERNEL_VERSION)'"             >>$(@D)/config.sh
+	echo "perladmin='root'"                                 >>$(@D)/config.sh
+	(cd $(@D); ./Configure -S)
+	cp $(@D)/config.h $(@D)/xconfig.h
+	$(SED) 's/UNKNOWN-/Buildroot $(BR2_VERSION_FULL) /' $(@D)/patchlevel.h
+endef
+
+define PERL_BUILD_CMDS
+	echo "#!/bin/sh"                                > $(@D)/Cross/miniperl
+	echo "$(QEMU_USER) $(@D)/miniperl \"\$$@\""     >>$(@D)/Cross/miniperl
+	chmod +x $(@D)/Cross/miniperl
+	PERL_MM_OPT="PERL=$(@D)/Cross/miniperl" \
+		$(MAKE) -C $(@D) all
+endef
+
+define PERL_INSTALL_STAGING_CMDS
+	$(MAKE) INSTALL_DEPENDENCE= \
+		INSTALLFLAGS= \
+		DESTDIR="$(STAGING_DIR)" \
+		-C $(@D) install.perl
+endef
+
+define PERL_INSTALL_TARGET_CMDS
+	$(MAKE) INSTALL_DEPENDENCE= \
+		INSTALLFLAGS=-p \
+		DESTDIR="$(TARGET_DIR)" \
+		-C $(@D) install.perl
+endef
+
+define PERL_CLEAN_CMDS
+	-$(MAKE) -C $(@D) clean
+endef
+
+$(eval $(generic-package))
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 03/10] perl: add DB_File
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 02/10] perl: " Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 04/10] gdbm: new package Francois Perrad
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/perl/Config.in |   10 ++++++++++
 package/perl/perl.mk   |    4 ++++
 2 files changed, 14 insertions(+)

diff --git a/package/perl/Config.in b/package/perl/Config.in
index 096159f..9a13223 100644
--- a/package/perl/Config.in
+++ b/package/perl/Config.in
@@ -15,5 +15,15 @@ config BR2_PACKAGE_PERL
 
 	  http://www.perl.org/
 
+if BR2_PACKAGE_PERL
+
+config BR2_PACKAGE_PERL_DB_FILE
+	bool "DB_File"
+	select BR2_PACKAGE_BERKELEYDB
+	help
+	  Build the DB_File module.
+
+endif
+
 comment "perl requires an architecture supported by qemu"
 	depends on BR2_avr32 || BR2_bfin || BR2_sh2 || BR2_sh2a || BR2_sh3 || BR2_sh3eb || BR2_sh64
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
index b29e99f..fbaba54 100644
--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -11,7 +11,11 @@ PERL_SOURCE = perl-$(PERL_VERSION).tar.bz2
 PERL_LICENSE = Artistic
 PERL_LICENSE_FILES = Artistic
 PERL_INSTALL_STAGING = YES
+
 PERL_DEPENDENCIES = host-qemu
+ifeq ($(BR2_PACKAGE_BERKELEYDB),y)
+    PERL_DEPENDENCIES += berkeleydb
+endif
 
 PERL_CONF_OPT = -des \
 		-Dusecrosscompile \
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 04/10] gdbm: new package
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 02/10] perl: " Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 03/10] perl: add DB_File Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 05/10] perl: add GDBM_File Francois Perrad
                   ` (5 subsequent siblings)
  8 siblings, 0 replies; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/Config.in      |    1 +
 package/gdbm/Config.in |    8 ++++++++
 package/gdbm/gdbm.mk   |   12 ++++++++++++
 3 files changed, 21 insertions(+)
 create mode 100644 package/gdbm/Config.in
 create mode 100644 package/gdbm/gdbm.mk

diff --git a/package/Config.in b/package/Config.in
index 00a79ab..d9cadf9 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -324,6 +324,7 @@ endmenu
 
 menu "Database"
 source "package/berkeleydb/Config.in"
+source "package/gdbm/Config.in"
 source "package/mysql_client/Config.in"
 source "package/sqlcipher/Config.in"
 source "package/sqlite/Config.in"
diff --git a/package/gdbm/Config.in b/package/gdbm/Config.in
new file mode 100644
index 0000000..d5aae83
--- /dev/null
+++ b/package/gdbm/Config.in
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_GDBM
+	bool "gdbm"
+	help
+	  GNU dbm is a set of database routines that use extensible hashing.
+	  It works similar to the standard UNIX dbm routines.
+
+	  http://www.gnu.org/software/gdbm/gdbm.html
+
diff --git a/package/gdbm/gdbm.mk b/package/gdbm/gdbm.mk
new file mode 100644
index 0000000..4971b12
--- /dev/null
+++ b/package/gdbm/gdbm.mk
@@ -0,0 +1,12 @@
+#############################################################
+#
+# gdbm
+#
+#############################################################
+GDBM_VERSION = 1.10
+GDBM_SITE = $(BR2_GNU_MIRROR)/gdbm
+GDBM_LICENSE = GPLv3
+GDBM_LICENSE_FILES = COPYING
+GDBM_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 05/10] perl: add GDBM_File
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
                   ` (2 preceding siblings ...)
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 04/10] gdbm: new package Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 06/10] cpanminus: new package Francois Perrad
                   ` (4 subsequent siblings)
  8 siblings, 0 replies; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/perl/Config.in |    6 ++++++
 package/perl/perl.mk   |    3 +++
 2 files changed, 9 insertions(+)

diff --git a/package/perl/Config.in b/package/perl/Config.in
index 9a13223..6369243 100644
--- a/package/perl/Config.in
+++ b/package/perl/Config.in
@@ -23,6 +23,12 @@ config BR2_PACKAGE_PERL_DB_FILE
 	help
 	  Build the DB_File module.
 
+config BR2_PACKAGE_PERL_GDBM_FILE
+	bool "GDBM_File"
+	select BR2_PACKAGE_GDBM
+	help
+	  Build the GDBM_File module.
+
 endif
 
 comment "perl requires an architecture supported by qemu"
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
index fbaba54..0f12044 100644
--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -16,6 +16,9 @@ PERL_DEPENDENCIES = host-qemu
 ifeq ($(BR2_PACKAGE_BERKELEYDB),y)
     PERL_DEPENDENCIES += berkeleydb
 endif
+ifeq ($(BR2_PACKAGE_GDBM),y)
+    PERL_DEPENDENCIES += gdbm
+endif
 
 PERL_CONF_OPT = -des \
 		-Dusecrosscompile \
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 06/10] cpanminus: new package
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
                   ` (3 preceding siblings ...)
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 05/10] perl: add GDBM_File Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  2012-10-08  9:37   ` Thomas Petazzoni
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 07/10] perl: add option "custom install" Francois Perrad
                   ` (3 subsequent siblings)
  8 siblings, 1 reply; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/Config.in                        |    5 ++++
 package/cpanminus/Config.in              |   36 +++++++++++++++++++++++
 package/cpanminus/cpanminus.mk           |   46 ++++++++++++++++++++++++++++++
 package/perl/perl-fix-Module-Build.patch |   16 +++++++++++
 4 files changed, 103 insertions(+)
 create mode 100644 package/cpanminus/Config.in
 create mode 100644 package/cpanminus/cpanminus.mk
 create mode 100644 package/perl/perl-fix-Module-Build.patch

diff --git a/package/Config.in b/package/Config.in
index d9cadf9..06050f2 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -263,6 +263,11 @@ source "package/xavante/Config.in"
 endmenu
 endif
 source "package/perl/Config.in"
+if BR2_PACKAGE_PERL
+menu "Perl libraries/modules"
+source "package/cpanminus/Config.in"
+endmenu
+endif
 source "package/microperl/Config.in"
 source "package/php/Config.in"
 source "package/python/Config.in"
diff --git a/package/cpanminus/Config.in b/package/cpanminus/Config.in
new file mode 100644
index 0000000..b8b39dc
--- /dev/null
+++ b/package/cpanminus/Config.in
@@ -0,0 +1,36 @@
+config BR2_PACKAGE_CPANMINUS
+	bool "cpanminus"
+	help
+	  cpanminus is a script to get, unpack, build and install Perl modules
+	  from CPAN.
+
+	  Why? It's dependency free, requires zero configuration, and stands
+	  alone. When running, it requires only 10MB of RAM.
+
+	  http://github.com/miyagawa/cpanminus
+
+if BR2_PACKAGE_CPANMINUS
+
+config BR2_PACKAGE_CPANMINUS_MIRROR
+	string "mirror"
+	help
+	  Specifies the base URL for the CPAN mirror to use,
+	  such as http://cpan.cpantesters.org/.
+
+config BR2_PACKAGE_CPANMINUS_MODULES
+	string "Perl modules from CPAN"
+	default "Curses::UI"
+	help
+	  List of space-separated Perl modules to install from CPAN.
+
+	  Examples: Try::Tiny Dancer YAML Moo
+
+	  Install the listed modules and their dependencies.
+
+config BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES
+	string "native dependencies"
+	default "ncurses"
+	help
+	  Some XS modules require native libraries.
+
+endif
diff --git a/package/cpanminus/cpanminus.mk b/package/cpanminus/cpanminus.mk
new file mode 100644
index 0000000..43f8dde
--- /dev/null
+++ b/package/cpanminus/cpanminus.mk
@@ -0,0 +1,46 @@
+#############################################################
+#
+# cpanminus
+#
+#############################################################
+
+CPANMINUS_VERSION = 1.5018
+CPANMINUS_SOURCE = miyagawa-cpanminus-$(CPANMINUS_VERSION)-0-gee6cd30.tar.gz
+CPANMINUS_SITE = https://github.com/miyagawa/cpanminus/tarball/$(CPANMINUS_VERSION)
+CPANMINUS_DEPENDENCIES = perl $(call qstrip,$(BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES))
+
+CPANMINUS_RUN_PERL = $(QEMU_USER) $(STAGING_DIR)/usr/bin/perl
+CPANMINUS_ARCHNAME = $(shell $(CPANMINUS_RUN_PERL) -MConfig -e "print Config->{archname}")
+CPANMINUS_PERL_LIB      = $(TARGET_DIR)/usr/lib/perl5/$(PERL_VERSION)
+CPANMINUS_PERL_SITELIB  = $(TARGET_DIR)/usr/lib/perl5/site_perl/$(PERL_VERSION)
+CPANMINUS_PERL_ARCHLIB  = $(CPANMINUS_PERL_LIB)/$(CPANMINUS_ARCHNAME)
+CPANMINUS_PERL_SITEARCH = $(CPANMINUS_PERL_SITELIB)/$(CPANMINUS_ARCHNAME)
+CPANMINUS_PERL5LIB = $(CPANMINUS_PERL_SITEARCH):$(CPANMINUS_PERL_SITELIB):$(CPANMINUS_PERL_ARCHLIB):$(CPANMINUS_PERL_LIB)
+ifneq ($(BR2_PACKAGE_CPANMINUS_MIRROR),"")
+    CPANMINUS_MIRROR = --mirror $(call qstrip,$(BR2_PACKAGE_CPANMINUS_MIRROR)) --mirror-only
+endif
+CPANMINUS_MODULES = $(call qstrip,$(BR2_PACKAGE_CPANMINUS_MODULES))
+
+ifneq ($(CPANMINUS_MODULES),)
+define CPANMINUS_INSTALL_TARGET_CMDS
+	echo "#!/bin/sh"                                                        > $(@D)/run_perl
+	echo "PERL5LIB=$(CPANMINUS_PERL5LIB) $(CPANMINUS_RUN_PERL) \"\$$@\""    >>$(@D)/run_perl
+	chmod +x $(@D)/run_perl
+	PERL5LIB=$(CPANMINUS_PERL5LIB) \
+	PERL_MM_OPT="DESTDIR=$(TARGET_DIR) PERL=$(@D)/run_perl PERL_LIB=$(CPANMINUS_PERL_LIB) PERL_ARCHLIB=$(CPANMINUS_PERL_ARCHLIB)" \
+	PERL_MB_OPT="--destdir $(TARGET_DIR)" \
+	RUN_PERL="$(@D)/run_perl" \
+	$(CPANMINUS_RUN_PERL) $(@D)/cpanm \
+		--perl=$(@D)/run_perl \
+		--notest \
+		--no-man-pages \
+		$(CPANMINUS_MIRROR) \
+		$(call qstrip,$(BR2_PACKAGE_CPANMINUS_MODULES))
+endef
+else
+define CPANMINUS_INSTALL_TARGET_CMDS
+	@echo "No modules to install"
+endef
+endif
+
+$(eval $(generic-package))
diff --git a/package/perl/perl-fix-Module-Build.patch b/package/perl/perl-fix-Module-Build.patch
new file mode 100644
index 0000000..26b15e4
--- /dev/null
+++ b/package/perl/perl-fix-Module-Build.patch
@@ -0,0 +1,16 @@
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/cpan/Module-Build/lib/Module/Build/Base.pm
+===================================================================
+--- a/cpan/Module-Build/lib/Module/Build/Base.pm
++++ b/cpan/Module-Build/lib/Module/Build/Base.pm
+@@ -456,7 +456,7 @@
+   my $proto = shift;
+   my $c     = ref($proto) ? $proto->{config} : 'Module::Build::Config';
+ 
+-  my $perl  = $^X;
++  my $perl  = $ENV{RUN_PERL} || $^X;
+   my $perl_basename = File::Basename::basename($perl);
+ 
+   my @potential_perls;
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 07/10] perl: add option "custom install"
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
                   ` (4 preceding siblings ...)
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 06/10] cpanminus: new package Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 08/10] perl: relax microperl dependencies Francois Perrad
                   ` (2 subsequent siblings)
  8 siblings, 0 replies; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

allows same behaviour (and footprint) as microperl

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/cpanminus/Config.in |    4 ++++
 package/perl/Config.in      |   16 ++++++++++++++++
 package/perl/perl.mk        |   37 +++++++++++++++++++++++++++++++++++++
 3 files changed, 57 insertions(+)

diff --git a/package/cpanminus/Config.in b/package/cpanminus/Config.in
index b8b39dc..58fcb0c 100644
--- a/package/cpanminus/Config.in
+++ b/package/cpanminus/Config.in
@@ -1,5 +1,6 @@
 config BR2_PACKAGE_CPANMINUS
 	bool "cpanminus"
+	depends on !BR2_PACKAGE_PERL_CUSTOM_INSTALL
 	help
 	  cpanminus is a script to get, unpack, build and install Perl modules
 	  from CPAN.
@@ -34,3 +35,6 @@ config BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES
 	  Some XS modules require native libraries.
 
 endif
+
+comment "cpanminus requires a fully installed perl"
+	depends on BR2_PACKAGE_PERL_CUSTOM_INSTALL
diff --git a/package/perl/Config.in b/package/perl/Config.in
index 6369243..dcd4b58 100644
--- a/package/perl/Config.in
+++ b/package/perl/Config.in
@@ -17,6 +17,22 @@ config BR2_PACKAGE_PERL
 
 if BR2_PACKAGE_PERL
 
+config BR2_PACKAGE_PERL_CUSTOM_INSTALL
+	bool "custom install"
+	help
+	  Don't use the full install target
+	  Install only a selection of modules (like microperl).
+
+config BR2_PACKAGE_PERL_MODULES
+	string "additional modules"
+	depends on BR2_PACKAGE_PERL_CUSTOM_INSTALL
+	help
+	  List of space-separated perl modules to copy to the rootfs.
+
+	  Examples: constant.pm Getopt/Std.pm Time/Local.pm
+
+	  Module dependencies are not automatic so check your needs.
+
 config BR2_PACKAGE_PERL_DB_FILE
 	bool "DB_File"
 	select BR2_PACKAGE_BERKELEYDB
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
index 0f12044..1fee4e0 100644
--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -85,12 +85,49 @@ define PERL_INSTALL_STAGING_CMDS
 		-C $(@D) install.perl
 endef
 
+PERL_RUN_PERL = $(QEMU_USER) $(@D)/perl -Ilib
+PERL_ARCHNAME = $(shell $(PERL_RUN_PERL) -MConfig -e "print Config->{archname}")
+PERL_LIB = $(TARGET_DIR)/usr/lib/perl5/$(PERL_VERSION)
+PERL_ARCHLIB = $(PERL_LIB)/$(PERL_ARCHNAME)
+PERL_MODS = $(call qstrip,$(BR2_PACKAGE_PERL_MODULES))
+# Minimal set of modules required for 'perl -V' to work
+PERL_ARCH_MODS = Config.pm Config_git.pl Config_heavy.pl
+PERL_BASE_MODS = strict.pm vars.pm warnings.pm warnings/register.pm
+
+define PERL_INSTALL_MODULES
+	for i in $(PERL_ARCH_MODS); do \
+		$(INSTALL) -m 0644 -D $(@D)/lib/$$i $(PERL_ARCHLIB)/$$i; \
+	done
+	for i in $(PERL_BASE_MODS); do \
+		$(INSTALL) -m 0644 -D $(@D)/lib/$$i $(PERL_LIB)/$$i; \
+	done
+	for i in $(PERL_MODS); do \
+		j=`echo $$i|cut -d : -f 1` ; \
+		if [ -d $(@D)/lib/$$j ] ; then \
+			cp -af $(@D)/lib/$$j $(PERL_LIB) ; \
+		fi ; \
+		if [ -f $(@D)/lib/$$i ] ; then \
+			$(INSTALL) -m 0644 -D $(@D)/lib/$$i $(PERL_LIB)/$$i; \
+		fi ; \
+	done
+	# Remove test files
+	find $(PERL_LIB) -type f -name *.t -exec rm -f {} \;
+endef
+
+ifeq ($(BR2_PACKAGE_PERL_CUSTOM_INSTALL),y)
+define PERL_INSTALL_TARGET_CMDS
+	$(INSTALL) -m 0755 -D $(@D)/perl $(TARGET_DIR)/usr/bin/perl
+	$(INSTALL) -m 0755 -D $(@D)/libperl.so $(PERL_ARCHLIB)/CORE/libperl.so
+	$(PERL_INSTALL_MODULES)
+endef
+else
 define PERL_INSTALL_TARGET_CMDS
 	$(MAKE) INSTALL_DEPENDENCE= \
 		INSTALLFLAGS=-p \
 		DESTDIR="$(TARGET_DIR)" \
 		-C $(@D) install.perl
 endef
+endif
 
 define PERL_CLEAN_CMDS
 	-$(MAKE) -C $(@D) clean
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 08/10] perl: relax microperl dependencies
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
                   ` (5 preceding siblings ...)
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 07/10] perl: add option "custom install" Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 09/10] microperl: mark as DEPRECATED Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 10/10] microperl: remove it Francois Perrad
  8 siblings, 0 replies; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/autoconf/Config.in   |    2 +-
 package/autoconf/autoconf.mk |    7 ++++++-
 package/automake/Config.in   |    2 +-
 package/automake/automake.mk |    7 ++++++-
 package/ntp/Config.in        |    4 ++--
 package/samba/Config.in      |    4 ++--
 6 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/package/autoconf/Config.in b/package/autoconf/Config.in
index 00b3e2c..41866ad 100644
--- a/package/autoconf/Config.in
+++ b/package/autoconf/Config.in
@@ -1,6 +1,6 @@
 config BR2_PACKAGE_AUTOCONF
 	bool "autoconf"
-	select BR2_PACKAGE_MICROPERL
+	select BR2_PACKAGE_MICROPERL if !BR2_PACKAGE_PERL
 	help
 	  Extensible program for developing configure scripts.  These
 	  scripts handle all the mundane system/feature detection.
diff --git a/package/autoconf/autoconf.mk b/package/autoconf/autoconf.mk
index 3f84e3e..13a474e 100644
--- a/package/autoconf/autoconf.mk
+++ b/package/autoconf/autoconf.mk
@@ -10,7 +10,12 @@ AUTOCONF_SITE = $(BR2_GNU_MIRROR)/autoconf
 AUTOCONF_CONF_ENV = EMACS="no" ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 		    ac_cv_prog_gnu_m4_gnu=no
 
-AUTOCONF_DEPENDENCIES = microperl host-m4
+AUTOCONF_DEPENDENCIES = host-m4
+ifeq ($(BR2_PACKAGE_PERL),y)
+    AUTOCONF_DEPENDENCIES += perl
+else
+    AUTOCONF_DEPENDENCIES += microperl
+endif
 
 HOST_AUTOCONF_CONF_ENV = ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 			ac_cv_prog_gnu_m4_gnu=no
diff --git a/package/automake/Config.in b/package/automake/Config.in
index 935f1f1..c0b29d1 100644
--- a/package/automake/Config.in
+++ b/package/automake/Config.in
@@ -1,7 +1,7 @@
 config BR2_PACKAGE_AUTOMAKE
 	bool "automake"
 	select BR2_PACKAGE_AUTOCONF
-	select BR2_PACKAGE_MICROPERL
+	select BR2_PACKAGE_MICROPERL if !BR2_PACKAGE_PERL
 	help
 	  Tool for automatically generating Makefile's for input to
 	  configure scripts (made by autoconf).
diff --git a/package/automake/automake.mk b/package/automake/automake.mk
index 3c19085..0766111 100644
--- a/package/automake/automake.mk
+++ b/package/automake/automake.mk
@@ -7,7 +7,12 @@
 AUTOMAKE_VERSION = 1.11.5
 AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake
 
-AUTOMAKE_DEPENDENCIES = host-autoconf autoconf microperl
+AUTOMAKE_DEPENDENCIES = host-autoconf autoconf
+ifeq ($(BR2_PACKAGE_PERL),y)
+    AUTOMAKE_DEPENDENCIES += perl
+else
+    AUTOMAKE_DEPENDENCIES += microperl
+endif
 
 HOST_AUTOMAKE_DEPENDENCIES = host-autoconf
 
diff --git a/package/ntp/Config.in b/package/ntp/Config.in
index 5996596..434cd2d 100644
--- a/package/ntp/Config.in
+++ b/package/ntp/Config.in
@@ -20,7 +20,7 @@ config BR2_PACKAGE_NTP_NTP_KEYGEN
 
 config BR2_PACKAGE_NTP_NTP_WAIT
 	bool "ntp-wait"
-	depends on BR2_PACKAGE_MICROPERL
+	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
 	help
 	  ntp-wait waits until the locally running ntpd is in state 4
 	  (synchronized). This could be useful at boot time, to delay the
@@ -59,7 +59,7 @@ config BR2_PACKAGE_NTP_NTPSNMPD
 
 config BR2_PACKAGE_NTP_NTPTRACE
 	bool "ntptrace"
-	depends on BR2_PACKAGE_MICROPERL
+	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
 	help
 	  ntptrace is a perl script that uses the ntpq utility program to
 	  follow the chain of NTP servers from a given host back to the
diff --git a/package/samba/Config.in b/package/samba/Config.in
index e88b360..ee3244f 100644
--- a/package/samba/Config.in
+++ b/package/samba/Config.in
@@ -36,12 +36,12 @@ config BR2_PACKAGE_SAMBA_FINDSMB
 	default y
 	depends on BR2_PACKAGE_SAMBA_SMBCLIENT
 	depends on BR2_PACKAGE_SAMBA_NMBLOOKUP
-	depends on BR2_PACKAGE_MICROPERL
+	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
 	help
 	  Script to browse network
 
 comment "findsmb       - disabled (requires nmblookup, smbclient and perl)"
-	depends on !BR2_PACKAGE_SAMBA_SMBCLIENT || !BR2_PACKAGE_SAMBA_NMBLOOKUP || !BR2_PACKAGE_MICROPERL
+	depends on !BR2_PACKAGE_SAMBA_SMBCLIENT || !BR2_PACKAGE_SAMBA_NMBLOOKUP || !(BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL)
 
 config BR2_PACKAGE_SAMBA_NET
 	bool "net"
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 09/10] microperl: mark as DEPRECATED
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
                   ` (6 preceding siblings ...)
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 08/10] perl: relax microperl dependencies Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 10/10] microperl: remove it Francois Perrad
  8 siblings, 0 replies; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/microperl/Config.in |    1 +
 1 file changed, 1 insertion(+)

diff --git a/package/microperl/Config.in b/package/microperl/Config.in
index 66bbedd..19d104a 100644
--- a/package/microperl/Config.in
+++ b/package/microperl/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_MICROPERL
 	bool "microperl"
 	# needs fork()
 	depends on BR2_USE_MMU
+	depends on BR2_DEPRECATED
 	help
 	  Perl without operating-specific functions such as readdir.
 
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 10/10] microperl: remove it
  2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
                   ` (7 preceding siblings ...)
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 09/10] microperl: mark as DEPRECATED Francois Perrad
@ 2012-10-06 13:53 ` Francois Perrad
  8 siblings, 0 replies; 18+ messages in thread
From: Francois Perrad @ 2012-10-06 13:53 UTC (permalink / raw)
  To: buildroot

replaced by perl
use BR2_PACKAGE_PERL_CUSTOM_INSTALL if you want a small footprint

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/Config.in                                  |    1 -
 package/autoconf/Config.in                         |    2 +-
 package/autoconf/autoconf.mk                       |    7 +-
 package/automake/Config.in                         |    2 +-
 package/automake/automake.mk                       |    7 +-
 package/libxml-parser-perl/libxml-parser-perl.mk   |    6 -
 package/microperl/Config.in                        |   30 ----
 .../microperl/microperl-no-signal-handlers.patch   |   22 ---
 package/microperl/microperl-uudmap.patch           |   47 ------
 package/microperl/microperl.mk                     |  156 --------------------
 package/ntp/Config.in                              |    4 +-
 package/samba/Config.in                            |    4 +-
 12 files changed, 8 insertions(+), 280 deletions(-)
 delete mode 100644 package/microperl/Config.in
 delete mode 100644 package/microperl/microperl-no-signal-handlers.patch
 delete mode 100644 package/microperl/microperl-uudmap.patch
 delete mode 100644 package/microperl/microperl.mk

diff --git a/package/Config.in b/package/Config.in
index 06050f2..987d1d1 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -268,7 +268,6 @@ menu "Perl libraries/modules"
 source "package/cpanminus/Config.in"
 endmenu
 endif
-source "package/microperl/Config.in"
 source "package/php/Config.in"
 source "package/python/Config.in"
 if BR2_PACKAGE_PYTHON
diff --git a/package/autoconf/Config.in b/package/autoconf/Config.in
index 41866ad..5f2f148 100644
--- a/package/autoconf/Config.in
+++ b/package/autoconf/Config.in
@@ -1,6 +1,6 @@
 config BR2_PACKAGE_AUTOCONF
 	bool "autoconf"
-	select BR2_PACKAGE_MICROPERL if !BR2_PACKAGE_PERL
+	select BR2_PACKAGE_PERL
 	help
 	  Extensible program for developing configure scripts.  These
 	  scripts handle all the mundane system/feature detection.
diff --git a/package/autoconf/autoconf.mk b/package/autoconf/autoconf.mk
index 13a474e..0cb50db 100644
--- a/package/autoconf/autoconf.mk
+++ b/package/autoconf/autoconf.mk
@@ -10,12 +10,7 @@ AUTOCONF_SITE = $(BR2_GNU_MIRROR)/autoconf
 AUTOCONF_CONF_ENV = EMACS="no" ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 		    ac_cv_prog_gnu_m4_gnu=no
 
-AUTOCONF_DEPENDENCIES = host-m4
-ifeq ($(BR2_PACKAGE_PERL),y)
-    AUTOCONF_DEPENDENCIES += perl
-else
-    AUTOCONF_DEPENDENCIES += microperl
-endif
+AUTOCONF_DEPENDENCIES = host-m4 perl
 
 HOST_AUTOCONF_CONF_ENV = ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 			ac_cv_prog_gnu_m4_gnu=no
diff --git a/package/automake/Config.in b/package/automake/Config.in
index c0b29d1..9a9673a 100644
--- a/package/automake/Config.in
+++ b/package/automake/Config.in
@@ -1,7 +1,7 @@
 config BR2_PACKAGE_AUTOMAKE
 	bool "automake"
 	select BR2_PACKAGE_AUTOCONF
-	select BR2_PACKAGE_MICROPERL if !BR2_PACKAGE_PERL
+	select BR2_PACKAGE_PERL
 	help
 	  Tool for automatically generating Makefile's for input to
 	  configure scripts (made by autoconf).
diff --git a/package/automake/automake.mk b/package/automake/automake.mk
index 0766111..8be56c3 100644
--- a/package/automake/automake.mk
+++ b/package/automake/automake.mk
@@ -7,12 +7,7 @@
 AUTOMAKE_VERSION = 1.11.5
 AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake
 
-AUTOMAKE_DEPENDENCIES = host-autoconf autoconf
-ifeq ($(BR2_PACKAGE_PERL),y)
-    AUTOMAKE_DEPENDENCIES += perl
-else
-    AUTOMAKE_DEPENDENCIES += microperl
-endif
+AUTOMAKE_DEPENDENCIES = host-autoconf autoconf perl
 
 HOST_AUTOMAKE_DEPENDENCIES = host-autoconf
 
diff --git a/package/libxml-parser-perl/libxml-parser-perl.mk b/package/libxml-parser-perl/libxml-parser-perl.mk
index a6f8ae9..8e2f899 100644
--- a/package/libxml-parser-perl/libxml-parser-perl.mk
+++ b/package/libxml-parser-perl/libxml-parser-perl.mk
@@ -9,12 +9,6 @@ LIBXML_PARSER_PERL_SITE:=http://www.cpan.org/modules/by-module/XML/
 
 LIBXML_PARSER_PERL_DEPENDENCIES = expat
 
-ifeq ($(BR2_PACKAGE_MICROPERL),y)
-# microperl builds host-microperl, so ensure we build after that to build
-# against host-microperl instead of the system perl
-LIBXML_PARSER_PERL_DEPENDENCIES += microperl
-endif
-
 define HOST_LIBXML_PARSER_PERL_CONFIGURE_CMDS
  (cd $(@D) ; \
    $(HOST_CONFIGURE_OPTS) perl Makefile.PL \
diff --git a/package/microperl/Config.in b/package/microperl/Config.in
deleted file mode 100644
index 19d104a..0000000
--- a/package/microperl/Config.in
+++ /dev/null
@@ -1,30 +0,0 @@
-config BR2_PACKAGE_MICROPERL
-	bool "microperl"
-	# needs fork()
-	depends on BR2_USE_MMU
-	depends on BR2_DEPRECATED
-	help
-	  Perl without operating-specific functions such as readdir.
-
-if BR2_PACKAGE_MICROPERL
-
-config BR2_PACKAGE_MICROPERL_MODULES
-	string "additional modules"
-	help
-	  List of space-separated microperl modules to copy to the rootfs.
-
-	  Examples: warnings.pm Getopt/Std.pm Time::Local
-
-	  Module dependencies are not automatic so check your needs.
-	  You can't use XS modules like IO.
-
-menu "module bundles"
-
-config BR2_PACKAGE_MICROPERL_BUNDLE_CGI
-	bool "CGI"
-	help
-	  Copy required modules to do CGI scripting.
-
-endmenu
-
-endif
diff --git a/package/microperl/microperl-no-signal-handlers.patch b/package/microperl/microperl-no-signal-handlers.patch
deleted file mode 100644
index 3c9aa41..0000000
--- a/package/microperl/microperl-no-signal-handlers.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Backport of http://perl5.git.perl.org/perl.git/commitdiff/01d65469392dfc0a?hp=a82b5f080d91ffe184d8ac4795ac71e72e612c2f
-
-Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
-
-diff -Nura perl-5.12.3/miniperlmain.c perl-5.12.3-nosig/miniperlmain.c
---- perl-5.12.3/miniperlmain.c	2011-01-09 17:20:57.000000000 -0300
-+++ perl-5.12.3-nosig/miniperlmain.c	2011-04-14 10:16:53.564639438 -0300
-@@ -116,12 +116,14 @@
-     if (!exitstatus)
-         perl_run(my_perl);
- 
-+#ifndef PERL_MICRO
-     /* Unregister our signal handler before destroying my_perl */
-     for (i = 0; PL_sig_name[i]; i++) {
- 	if (rsignal_state(PL_sig_num[i]) == (Sighandler_t) PL_csighandlerp) {
- 	    rsignal(PL_sig_num[i], (Sighandler_t) SIG_DFL);
- 	}
-     }
-+#endif
- 
-     exitstatus = perl_destruct(my_perl);
- 
diff --git a/package/microperl/microperl-uudmap.patch b/package/microperl/microperl-uudmap.patch
deleted file mode 100644
index c72f9c9..0000000
--- a/package/microperl/microperl-uudmap.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From a82b5f080d91ffe184d8ac4795ac71e72e612c2f Mon Sep 17 00:00:00 2001
-From: David Leadbeater <dgl@dgl.cx>
-Date: Mon, 7 Mar 2011 18:40:55 +0000
-Subject: [PATCH] microperl: Update generate_uudmap in Makefile.micro
-
-Makefile.micro hadn't kept up with the changes for generate_uudmap,
-make it match the real Makefile.
----
- Makefile.micro |    8 ++++----
- 1 files changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/Makefile.micro b/Makefile.micro
-index 4b738f5..567d98a 100644
---- a/Makefile.micro
-+++ b/Makefile.micro
-@@ -35,7 +35,7 @@ H = av.h uconfig.h cop.h cv.h embed.h embedvar.h form.h gv.h handy.h \
- HE = $(H) EXTERN.h
- 
- clean:
--	-rm -f $(O) microperl generate_uudmap$(_X) uudmap.h
-+	-rm -f $(O) microperl generate_uudmap$(_X) uudmap.h bitcount.h
- 
- distclean:	clean
- 
-@@ -74,7 +74,7 @@ udoop$(_O):	$(HE) doop.c
- udump$(_O):	$(HE) dump.c regcomp.h regnodes.h
- 	$(CC) $(CCFLAGS) -o $@ $(CFLAGS) dump.c
- 
--uglobals$(_O):	$(H) globals.c INTERN.h perlapi.h
-+uglobals$(_O):	$(H) globals.c INTERN.h perlapi.h uudmap.h bitcount.h
- 	$(CC) $(CCFLAGS) -o $@ $(CFLAGS) globals.c
- 
- ugv$(_O):	$(HE) gv.c
-@@ -173,8 +173,8 @@ uutil$(_O):	$(HE) util.c
- uperlapi$(_O):	$(HE) perlapi.c perlapi.h
- 	$(CC) $(CCFLAGS) -o $@ $(CFLAGS) perlapi.c
- 
--uudmap.h: generate_uudmap$(_X)
--	$(RUN) ./generate_uudmap$(_X) >uudmap.h
-+uudmap.h bitcount.h: generate_uudmap$(_X)
-+	$(RUN) ./generate_uudmap$(_X) uudmap.h bitcount.h
- 
- generate_uudmap$(_O): generate_uudmap.c
- 	$(CC) $(CCFLAGS) -o $@ $(CFLAGS) generate_uudmap.c
--- 
-1.6.5.2.74.g610f9.dirty
-
diff --git a/package/microperl/microperl.mk b/package/microperl/microperl.mk
deleted file mode 100644
index b2a912a..0000000
--- a/package/microperl/microperl.mk
+++ /dev/null
@@ -1,156 +0,0 @@
-#############################################################
-#
-# microperl
-#
-#############################################################
-
-MICROPERL_VERSION = 5.12.4
-MICROPERL_SITE = http://www.cpan.org/src/5.0
-MICROPERL_SOURCE = perl-$(MICROPERL_VERSION).tar.bz2
-MICROPERL_LICENSE = Artistic
-MICROPERL_LICENSE_FILES = Artistic
-MICROPERL_DEPENDENCIES = host-microperl
-MICROPERL_MODS_DIR = /usr/lib/perl5/$(MICROPERL_VERSION)
-MICROPERL_ARCH_DIR = $(MICROPERL_MODS_DIR)/$(GNU_TARGET_NAME)
-MICROPERL_MODS = $(call qstrip,$(BR2_PACKAGE_MICROPERL_MODULES))
-
-# Minimal set of modules required for 'perl -V' to work
-MICROPERL_ARCH_MODS = Config.pm Config_git.pl Config_heavy.pl
-MICROPERL_BASE_MODS = strict.pm
-
-# CGI bundle
-ifeq ($(BR2_PACKAGE_MICROPERL_BUNDLE_CGI),y)
-MICROPERL_MODS += constant.pm CGI CGI.pm Carp.pm Exporter.pm overload.pm \
-	vars.pm warnings.pm warnings/register.pm
-endif
-
-# Host microperl is actually full-blown perl
-define HOST_MICROPERL_CONFIGURE_CMDS
-	cd $(@D) ; \
-	./Configure -Dcc="$(HOSTCC)" -Dprefix="$(HOST_DIR)/usr" \
-		-Dloclibpth='/lib /lib64 /usr/lib /usr/lib64' -des
-endef
-
-define HOST_MICROPERL_BUILD_CMDS
-	$(MAKE) -C $(@D)
-endef
-
-define HOST_MICROPERL_INSTALL_CMDS
-	$(MAKE) -C $(@D) install
-endef
-
-ifeq ($(BR2_ENDIAN),"BIG")
-define MICROPERL_BIGENDIAN
-	$(SED) '/^byteorder=/d' $(@D)/uconfig.sh
-	echo "byteorder='4321'" >>$(@D)/uconfig.sh
-endef
-endif
-
-ifeq ($(BR2_LARGEFILE),y)
-define MICROPERL_LARGEFILE
-	$(SED) '/^uselargefiles=/d' $(@D)/uconfig.sh
-	echo "uselargefiles='define'" >>$(@D)/uconfig.sh
-endef
-endif
-
-ifeq ($(BR2_USE_WCHAR),y)
-define MICROPERL_WCHAR
-	$(SED) '/^d_mbstowcs=/d' -e '/^d_mbtowc=/d' -e '/^d_wcstombs=/d' \
-		-e '/^d_wctomb=/d' $(@D)/uconfig.sh
-	echo "d_mbstowcs='define'" >>$(@D)/uconfig.sh
-	echo "d_mbtowc='define'" >>$(@D)/uconfig.sh
-	echo "d_wcstombs='define'" >>$(@D)/uconfig.sh
-	echo "d_wctomb='define'" >>$(@D)/uconfig.sh
-endef
-endif
-
-define MICROPERL_CONFIGURE_CMDS
-	$(SED) '/^archlib=/d' -e '/^archlibexp=/d' -e '/^optimize=/d' \
-		-e '/^archname=/d' -e '/^d_poll=/d' -e '/^i_poll=/d' \
-		-e '/^osname=/d' -e '/^u32type=/d' -e '/^d_archlib=/d' \
-		-e '/^d_memset=/d' -e '/^i_fcntl=/d' -e '/^useperlio=/d' \
-		-e '/^need_va_copy=/d' $(@D)/uconfig.sh
-	$(SED) 's/5.12/$(MICROPERL_VERSION)/' $(@D)/uconfig.sh
-	echo "archlib='$(MICROPERL_ARCH_DIR)'" >>$(@D)/uconfig.sh
-	echo "archlibexp='$(MICROPERL_ARCH_DIR)'" >>$(@D)/uconfig.sh
-	echo "d_archlib='define'" >>$(@D)/uconfig.sh
-	echo "archname='$(GNU_TARGET_NAME)'" >>$(@D)/uconfig.sh
-	echo "osname='linux'" >>$(@D)/uconfig.sh
-	echo "cc='$(TARGET_CC)'" >>$(@D)/uconfig.sh
-	echo "ccflags='$(TARGET_CFLAGS)'" >>$(@D)/uconfig.sh
-	echo "optimize='$(TARGET_CFLAGS)'" >>$(@D)/uconfig.sh
-	echo "usecrosscompile='define'" >>$(@D)/uconfig.sh
-	echo "d_memset='define'" >>$(@D)/uconfig.sh
-	echo "i_fcntl='define'" >>$(@D)/uconfig.sh
-	echo "useperlio='define'" >>$(@D)/uconfig.sh
-	echo "u32type='unsigned int'" >>$(@D)/uconfig.sh
-	echo "need_va_copy='define'" >>$(@D)/uconfig.sh
-	echo "d_poll='define'" >>$(@D)/uconfig.sh
-	echo "i_poll='define'" >>$(@D)/uconfig.sh
-	$(SED) 's/UNKNOWN-/Buildroot $(BR2_VERSION_FULL) /' $(@D)/patchlevel.h
-	$(SED) 's/local\///' $(@D)/uconfig.sh
-	$(MICROPERL_BIGENDIAN)
-	$(MICROPERL_LARGEFILE)
-	$(MICROPERL_WCHAR)
-	$(MAKE) -C $(@D) -f Makefile.micro regen_uconfig
-	cp -f $(@D)/uconfig.h $(@D)/config.h
-	cp -f $(@D)/uconfig.sh $(@D)/config.sh
-	echo "ccname='$(TARGET_CC)'" >>$(@D)/config.sh
-	echo "PERL_CONFIG_SH=true" >>$(@D)/config.sh
-	cd $(@D) ; $(HOST_DIR)/usr/bin/perl make_patchnum.pl ; \
-	$(HOST_DIR)/usr/bin/perl configpm
-endef
-
-define MICROPERL_BUILD_CMDS
-	$(MAKE) -f Makefile.micro -C $(@D) \
-		CC="$(HOSTCC)" bitcount.h
-	$(MAKE) -f Makefile.micro -C $(@D) \
-		CC="$(TARGET_CC)" OPTIMIZE="$(TARGET_CFLAGS)"
-endef
-
-# Some extensions don't need a build run
-# We try to build anyway to avoid a huge black list
-# Just ignore make_ext.pl warning/errors
-define MICROPERL_BUILD_EXTENSIONS
-	for i in $(MICROPERL_MODS); do \
-	cd $(@D); ln -sf $(HOST_DIR)/usr/bin/perl miniperl; \
-		PERL5LIB=$(TARGET_DIR)/$(MICROPERL_ARCH_DIR) \
-		$(HOST_DIR)/usr/bin/perl make_ext.pl MAKE="$(MAKE)" --nonxs \
-		`echo $$i|sed -e 's/.pm//'`; \
-	done
-endef
-
-define MICROPERL_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 0755 -D $(@D)/microperl $(TARGET_DIR)/usr/bin/microperl
-	ln -sf microperl $(TARGET_DIR)/usr/bin/perl
-	for i in $(MICROPERL_ARCH_MODS); do \
-		$(INSTALL) -m 0644 -D $(@D)/lib/$$i \
-			$(TARGET_DIR)/$(MICROPERL_ARCH_DIR)/$$i; \
-	done
-	for i in $(MICROPERL_BASE_MODS); do \
-		$(INSTALL) -m 0644 -D $(@D)/lib/$$i \
-			$(TARGET_DIR)/$(MICROPERL_MODS_DIR)/$$i; \
-	done
-	$(MICROPERL_BUILD_EXTENSIONS)
-	for i in $(MICROPERL_MODS); do \
-		j=`echo $$i|cut -d : -f 1` ; \
-		if [ -d $(@D)/lib/$$j ] ; then \
-			cp -af $(@D)/lib/$$j $(TARGET_DIR)/$(MICROPERL_MODS_DIR) ; \
-		fi ; \
-		if [ -f $(@D)/lib/$$i ] ; then \
-			$(INSTALL) -m 0644 -D $(@D)/lib/$$i $(TARGET_DIR)/$(MICROPERL_MODS_DIR)/$$i; \
-		fi ; \
-	done
-	# Remove test files
-	find $(TARGET_DIR)/$(MICROPERL_MODS_DIR) -type f -name *.t \
-		-exec rm -f {} \;
-endef
-
-define MICROPERL_UNINSTALL_TARGET_CMDS
-	rm -f $(TARGET_DIR)/usr/bin/perl
-	rm -f $(TARGET_DIR)/usr/bin/microperl
-	rm -rf $(TARGET_DIR)/usr/lib/perl5
-endef
-
-$(eval $(generic-package))
-$(eval $(host-generic-package))
diff --git a/package/ntp/Config.in b/package/ntp/Config.in
index 434cd2d..ec5dbbb 100644
--- a/package/ntp/Config.in
+++ b/package/ntp/Config.in
@@ -20,7 +20,7 @@ config BR2_PACKAGE_NTP_NTP_KEYGEN
 
 config BR2_PACKAGE_NTP_NTP_WAIT
 	bool "ntp-wait"
-	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
+	depends on BR2_PACKAGE_PERL
 	help
 	  ntp-wait waits until the locally running ntpd is in state 4
 	  (synchronized). This could be useful at boot time, to delay the
@@ -59,7 +59,7 @@ config BR2_PACKAGE_NTP_NTPSNMPD
 
 config BR2_PACKAGE_NTP_NTPTRACE
 	bool "ntptrace"
-	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
+	depends on BR2_PACKAGE_PERL
 	help
 	  ntptrace is a perl script that uses the ntpq utility program to
 	  follow the chain of NTP servers from a given host back to the
diff --git a/package/samba/Config.in b/package/samba/Config.in
index ee3244f..92714d7 100644
--- a/package/samba/Config.in
+++ b/package/samba/Config.in
@@ -36,12 +36,12 @@ config BR2_PACKAGE_SAMBA_FINDSMB
 	default y
 	depends on BR2_PACKAGE_SAMBA_SMBCLIENT
 	depends on BR2_PACKAGE_SAMBA_NMBLOOKUP
-	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
+	depends on BR2_PACKAGE_PERL
 	help
 	  Script to browse network
 
 comment "findsmb       - disabled (requires nmblookup, smbclient and perl)"
-	depends on !BR2_PACKAGE_SAMBA_SMBCLIENT || !BR2_PACKAGE_SAMBA_NMBLOOKUP || !(BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL)
+	depends on !BR2_PACKAGE_SAMBA_SMBCLIENT || !BR2_PACKAGE_SAMBA_NMBLOOKUP || !BR2_PACKAGE_PERL
 
 config BR2_PACKAGE_SAMBA_NET
 	bool "net"
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 02/10] perl: new package
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 02/10] perl: " Francois Perrad
@ 2012-10-08  9:34   ` Thomas Petazzoni
  2012-10-08 11:41     ` François Perrad
  0 siblings, 1 reply; 18+ messages in thread
From: Thomas Petazzoni @ 2012-10-08  9:34 UTC (permalink / raw)
  To: buildroot

Dear Francois Perrad,

On Sat,  6 Oct 2012 15:53:45 +0200, Francois Perrad wrote:

> +	select BR2_PACKAGE_HOST_QEMU

No longer needed.

> +define PERL_INSTALL_TARGET_CMDS
> +	$(MAKE) INSTALL_DEPENDENCE= \
> +		INSTALLFLAGS=-p \
> +		DESTDIR="$(TARGET_DIR)" \
> +		-C $(@D) install.perl
> +endef

In my target, I have about 2 MB of C header files in
usr/lib/perl5/5.16.1/linux-gnueabihf/CORE. I suspect they are not
really useful, right?

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 06/10] cpanminus: new package
  2012-10-06 13:53 ` [Buildroot] [PATCH v9 06/10] cpanminus: new package Francois Perrad
@ 2012-10-08  9:37   ` Thomas Petazzoni
  2012-10-10 15:04     ` François Perrad
  0 siblings, 1 reply; 18+ messages in thread
From: Thomas Petazzoni @ 2012-10-08  9:37 UTC (permalink / raw)
  To: buildroot

Dear Francois Perrad,

On Sat,  6 Oct 2012 15:53:49 +0200, Francois Perrad wrote:
> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> ---
>  package/Config.in                        |    5 ++++
>  package/cpanminus/Config.in              |   36 +++++++++++++++++++++++
>  package/cpanminus/cpanminus.mk           |   46 ++++++++++++++++++++++++++++++
>  package/perl/perl-fix-Module-Build.patch |   16 +++++++++++
>  4 files changed, 103 insertions(+)
>  create mode 100644 package/cpanminus/Config.in
>  create mode 100644 package/cpanminus/cpanminus.mk
>  create mode 100644 package/perl/perl-fix-Module-Build.patch

One thing that I'm wondering with cpanminus is how it interacts with
the Buildroot mechanisms for download.

I.e :

 *) Where does cpanminus downloads the Perl module tarballs?

 *) Does it re-use the downloaded tarballs between rebuilds?

 *) Is there a way to tell it to download its tarballs in $(DL_DIR) ?

 *) Is there a way to have "make source" work properly, i.e ask
    cpanminus to download the tarballs that it will need so that
    offline builds are possible.

 *) Is it possible to make it play nice with BR2_PRIMARY_SITE ?

Thanks!

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 02/10] perl: new package
  2012-10-08  9:34   ` Thomas Petazzoni
@ 2012-10-08 11:41     ` François Perrad
  2012-10-08 11:49       ` Thomas Petazzoni
  0 siblings, 1 reply; 18+ messages in thread
From: François Perrad @ 2012-10-08 11:41 UTC (permalink / raw)
  To: buildroot

2012/10/8 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> Dear Francois Perrad,
>
> On Sat,  6 Oct 2012 15:53:45 +0200, Francois Perrad wrote:
>
>> +     select BR2_PACKAGE_HOST_QEMU
>
> No longer needed.

Ok

>
>> +define PERL_INSTALL_TARGET_CMDS
>> +     $(MAKE) INSTALL_DEPENDENCE= \
>> +             INSTALLFLAGS=-p \
>> +             DESTDIR="$(TARGET_DIR)" \
>> +             -C $(@D) install.perl
>> +endef
>
> In my target, I have about 2 MB of C header files in
> usr/lib/perl5/5.16.1/linux-gnueabihf/CORE. I suspect they are not
> really useful, right?

No, there are required for building XS modules (with cpanminus for example).

Fran?ois

>
> Thomas
> --
> Thomas Petazzoni, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 02/10] perl: new package
  2012-10-08 11:41     ` François Perrad
@ 2012-10-08 11:49       ` Thomas Petazzoni
  2012-10-08 16:56         ` François Perrad
  2012-10-10 14:41         ` François Perrad
  0 siblings, 2 replies; 18+ messages in thread
From: Thomas Petazzoni @ 2012-10-08 11:49 UTC (permalink / raw)
  To: buildroot


On Mon, 8 Oct 2012 13:41:16 +0200, Fran?ois Perrad wrote:

> > In my target, I have about 2 MB of C header files in
> > usr/lib/perl5/5.16.1/linux-gnueabihf/CORE. I suspect they are not
> > really useful, right?
> 
> No, there are required for building XS modules (with cpanminus for example).

Yes, but you're not building those XS modules on the target. So keep
the headers only in $(STAGING_DIR).

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 02/10] perl: new package
  2012-10-08 11:49       ` Thomas Petazzoni
@ 2012-10-08 16:56         ` François Perrad
  2012-10-08 19:13           ` Thomas Petazzoni
  2012-10-10 14:41         ` François Perrad
  1 sibling, 1 reply; 18+ messages in thread
From: François Perrad @ 2012-10-08 16:56 UTC (permalink / raw)
  To: buildroot

2012/10/8 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
>
> On Mon, 8 Oct 2012 13:41:16 +0200, Fran?ois Perrad wrote:
>
>> > In my target, I have about 2 MB of C header files in
>> > usr/lib/perl5/5.16.1/linux-gnueabihf/CORE. I suspect they are not
>> > really useful, right?
>>
>> No, there are required for building XS modules (with cpanminus for example).
>
> Yes, but you're not building those XS modules on the target. So keep
> the headers only in $(STAGING_DIR).
>

a BR user could choose between 2 methods for installing Perl :
- a full install supplied by the script `installperl` from the Perl tarball
- a custom install which reproduce the behavior of the BR package of microperl,
where the user explicitily defines each module/file to install

In my sense, when a user chooses the full install, he must also use
the post-build script which removes its useless files,
like CORE/*.h or the Unicode support.

Fran?ois

> Thomas
> --
> Thomas Petazzoni, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 02/10] perl: new package
  2012-10-08 16:56         ` François Perrad
@ 2012-10-08 19:13           ` Thomas Petazzoni
  0 siblings, 0 replies; 18+ messages in thread
From: Thomas Petazzoni @ 2012-10-08 19:13 UTC (permalink / raw)
  To: buildroot


On Mon, 8 Oct 2012 18:56:09 +0200, Fran?ois Perrad wrote:

> a BR user could choose between 2 methods for installing Perl :
> - a full install supplied by the script `installperl` from the Perl tarball
> - a custom install which reproduce the behavior of the BR package of microperl,
> where the user explicitily defines each module/file to install
> 
> In my sense, when a user chooses the full install, he must also use
> the post-build script which removes its useless files,
> like CORE/*.h or the Unicode support.

This is in complete contradiction with what we do in all other
Buildroot packages, so I don't think your statement actually makes
sense in the context of Buildroot. Unless BR2_HAVE_DEVFILES is enabled,
we don't want development files to be installed on the target.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 02/10] perl: new package
  2012-10-08 11:49       ` Thomas Petazzoni
  2012-10-08 16:56         ` François Perrad
@ 2012-10-10 14:41         ` François Perrad
  1 sibling, 0 replies; 18+ messages in thread
From: François Perrad @ 2012-10-10 14:41 UTC (permalink / raw)
  To: buildroot

2012/10/8 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
>
> On Mon, 8 Oct 2012 13:41:16 +0200, Fran?ois Perrad wrote:
>
>> > In my target, I have about 2 MB of C header files in
>> > usr/lib/perl5/5.16.1/linux-gnueabihf/CORE. I suspect they are not
>> > really useful, right?
>>
>> No, there are required for building XS modules (with cpanminus for example).
>
> Yes, but you're not building those XS modules on the target. So keep
> the headers only in $(STAGING_DIR).
>

After a refactoring of cpanminus.mk, the headers in $(TARGET_DIR)
could be removed.

> Thomas
> --
> Thomas Petazzoni, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [Buildroot] [PATCH v9 06/10] cpanminus: new package
  2012-10-08  9:37   ` Thomas Petazzoni
@ 2012-10-10 15:04     ` François Perrad
  0 siblings, 0 replies; 18+ messages in thread
From: François Perrad @ 2012-10-10 15:04 UTC (permalink / raw)
  To: buildroot

2012/10/8 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> Dear Francois Perrad,
>
> On Sat,  6 Oct 2012 15:53:49 +0200, Francois Perrad wrote:
>> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
>> ---
>>  package/Config.in                        |    5 ++++
>>  package/cpanminus/Config.in              |   36 +++++++++++++++++++++++
>>  package/cpanminus/cpanminus.mk           |   46 ++++++++++++++++++++++++++++++
>>  package/perl/perl-fix-Module-Build.patch |   16 +++++++++++
>>  4 files changed, 103 insertions(+)
>>  create mode 100644 package/cpanminus/Config.in
>>  create mode 100644 package/cpanminus/cpanminus.mk
>>  create mode 100644 package/perl/perl-fix-Module-Build.patch
>
> One thing that I'm wondering with cpanminus is how it interacts with
> the Buildroot mechanisms for download.
>

It doesn't interact.
cpanminus is not a CPAN client based on BR infrastructure.
I think what creating a CPAN client based on BR infrastructure could
be a nice project, but premature at this time.

But the reproductibility of a project (with an identified version of
each CPAN module) could be done with a local CPAN mirror.
A local CPAN mirror allows to work offline.
(see minicpan, http://search.cpan.org/~rjbs/CPAN-Mini-1.111009/bin/minicpan).
So, cpanminus does the job (with its way).

Fran?ois

> I.e :
>
>  *) Where does cpanminus downloads the Perl module tarballs?
>
>  *) Does it re-use the downloaded tarballs between rebuilds?
>
>  *) Is there a way to tell it to download its tarballs in $(DL_DIR) ?
>
>  *) Is there a way to have "make source" work properly, i.e ask
>     cpanminus to download the tarballs that it will need so that
>     offline builds are possible.
>
>  *) Is it possible to make it play nice with BR2_PRIMARY_SITE ?
>
> Thanks!
>
> Thomas
> --
> Thomas Petazzoni, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

^ permalink raw reply	[flat|nested] 18+ messages in thread
end of thread, other threads:[~2012-10-10 15:04 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-06 13:53 [Buildroot] [PATCH v9 01/10] host-qemu: new package Francois Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 02/10] perl: " Francois Perrad
2012-10-08  9:34   ` Thomas Petazzoni
2012-10-08 11:41     ` François Perrad
2012-10-08 11:49       ` Thomas Petazzoni
2012-10-08 16:56         ` François Perrad
2012-10-08 19:13           ` Thomas Petazzoni
2012-10-10 14:41         ` François Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 03/10] perl: add DB_File Francois Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 04/10] gdbm: new package Francois Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 05/10] perl: add GDBM_File Francois Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 06/10] cpanminus: new package Francois Perrad
2012-10-08  9:37   ` Thomas Petazzoni
2012-10-10 15:04     ` François Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 07/10] perl: add option "custom install" Francois Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 08/10] perl: relax microperl dependencies Francois Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 09/10] microperl: mark as DEPRECATED Francois Perrad
2012-10-06 13:53 ` [Buildroot] [PATCH v9 10/10] microperl: remove it Francois Perrad

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.