All of lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH v10 01/10] host-qemu: new package
@ 2012-10-10 15:06 Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 02/10] perl: " Francois Perrad
                   ` (8 more replies)
  0 siblings, 9 replies; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

only user mode for the current target architecture

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/qemu/qemu.mk |   82 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 package/qemu/qemu.mk

diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
new file mode 100644
index 0000000..de72e04
--- /dev/null
+++ b/package/qemu/qemu.mk
@@ -0,0 +1,82 @@
+#############################################################
+#
+# qemu
+#
+#############################################################
+
+QEMU_VERSION = 1.2.0
+QEMU_SOURCE = qemu-$(QEMU_VERSION).tar.bz2
+QEMU_SITE = http://wiki.qemu.org/download
+
+#       BR ARCH         qemu
+#       -------         ----
+#       arm             arm
+#       armeb           armeb
+#       avr32           not supported
+#       bfin            not supported
+#       i386            i386
+#       i486            i386
+#       i586            i386
+#       i686            i386
+#       x86_64          x86_64
+#       m68k            m68k
+#       microblaze      microblaze
+#       mips            mips
+#       mipsel          mipsel
+#       mips64          ?
+#       mips64el        ?
+#       powerpc         ppc
+#       sh2             not supported
+#       sh2a            not supported
+#       sh3             not supported
+#       sh3eb           not supported
+#       sh4             sh4
+#       sh4eb           sh4eb
+#       sh4a            ?
+#       sh4aeb          ?
+#       sh64            not supported
+#       sparc           sparc
+
+QEMU_ARCH = $(ARCH)
+ifeq ($(QEMU_ARCH),i486)
+    QEMU_ARCH = i386
+endif
+ifeq ($(QEMU_ARCH),i586)
+    QEMU_ARCH = i386
+endif
+ifeq ($(QEMU_ARCH),i686)
+    QEMU_ARCH = i386
+endif
+ifeq ($(QEMU_ARCH),powerpc)
+    QEMU_ARCH = ppc
+endif
+HOST_QEMU_TARGETS=$(QEMU_ARCH)-linux-user
+
+define HOST_QEMU_CONFIGURE_CMDS
+	(cd $(@D); ./configure                          \
+		--target-list="$(HOST_QEMU_TARGETS)"    \
+		--prefix="$(HOST_DIR)/usr"              \
+		--interp-prefix=$(STAGING_DIR)          \
+		--cc="$(HOSTCC)"                        \
+		--host-cc="$(HOSTCC)"                   \
+		--extra-cflags="$(HOST_CFLAGS)"         \
+		--extra-ldflags="$(HOST_LDFLAGS)"       \
+	)
+endef
+
+define HOST_QEMU_BUILD_CMDS
+	$(MAKE) -C $(@D) all
+endef
+
+define HOST_QEMU_INSTALL_CMDS
+	$(MAKE) -C $(@D) install
+endef
+
+define HOST_QEMU_CLEAN_CMDS
+	$(MAKE) -C $(@D) clean
+endef
+
+$(eval $(host-generic-package))
+
+# variable used by other packages
+QEMU_USER = $(HOST_DIR)/usr/bin/qemu-$(QEMU_ARCH)
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 02/10] perl: new package
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 03/10] perl: add DB_File Francois Perrad
                   ` (7 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/Config.in                      |    1 +
 package/perl/Config.in                 |   18 ++++++
 package/perl/perl-configure-qemu.patch |   53 +++++++++++++++++
 package/perl/perl-make-ext.patch       |   24 ++++++++
 package/perl/perl-mkppport.patch       |   37 ++++++++++++
 package/perl/perl.mk                   |   99 ++++++++++++++++++++++++++++++++
 6 files changed, 232 insertions(+)
 create mode 100644 package/perl/Config.in
 create mode 100644 package/perl/perl-configure-qemu.patch
 create mode 100644 package/perl/perl-make-ext.patch
 create mode 100644 package/perl/perl-mkppport.patch
 create mode 100644 package/perl/perl.mk

diff --git a/package/Config.in b/package/Config.in
index f308de7..00a79ab 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -262,6 +262,7 @@ source "package/wsapi/Config.in"
 source "package/xavante/Config.in"
 endmenu
 endif
+source "package/perl/Config.in"
 source "package/microperl/Config.in"
 source "package/php/Config.in"
 source "package/python/Config.in"
diff --git a/package/perl/Config.in b/package/perl/Config.in
new file mode 100644
index 0000000..0a41a97
--- /dev/null
+++ b/package/perl/Config.in
@@ -0,0 +1,18 @@
+config BR2_PACKAGE_PERL
+	bool "perl"
+	depends on !BR2_avr32
+	depends on !BR2_bfin
+	depends on !BR2_sh2
+	depends on !BR2_sh2a
+	depends on !BR2_sh3
+	depends on !BR2_sh3eb
+	depends on !BR2_sh64
+	help
+	  Larry Wall's Practical Extraction and Report Language
+	  An interpreted scripting language, known among some as "Unix's Swiss
+	  Army Chainsaw".
+
+	  http://www.perl.org/
+
+comment "perl requires an architecture supported by qemu"
+	depends on BR2_avr32 || BR2_bfin || BR2_sh2 || BR2_sh2a || BR2_sh3 || BR2_sh3eb || BR2_sh64
diff --git a/package/perl/perl-configure-qemu.patch b/package/perl/perl-configure-qemu.patch
new file mode 100644
index 0000000..c2d6b92
--- /dev/null
+++ b/package/perl/perl-configure-qemu.patch
@@ -0,0 +1,53 @@
+Add qemu support
+
+see https://rt.perl.org/rt3//Public/Bug/Display.html?id=114798
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/Configure
+===================================================================
+--- a/Configure
++++ b/Configure
+@@ -2837,6 +2837,9 @@
+             ;;
+         *)  echo "Using usrinc $usrinc." >&4 ;;
+ 	esac
++	case "$targetrun" in
++	*qemu*) targethost=dummy ;;
++	esac
+ 	case "$targethost" in
+ 	'') echo "Targethost not defined." >&4; croak=y ;;
+         *)  echo "Using targethost $targethost." >&4
+@@ -2868,7 +2871,7 @@
+ 	case "$targetfrom" in
+ 	'') targetfrom=scp ;;
+ 	esac
+-    	run=$run-$targetrun
++    	run=$run-`basename $targetrun`
+     	to=$to-$targetto
+     	from=$from-$targetfrom
+ 	case "$targetdir" in
+@@ -2908,6 +2911,14 @@
+ $targetrun -l $targetuser $targethost "cd \$cwd && ./\$exe \$@"
+ EOF
+ 	    ;;
++	*qemu*)
++	    to=:
++	    from=:
++	    cat >$run <<EOF
++#!/bin/sh
++$targetrun -L $qemulib "\$@"
++EOF
++	    ;;
+ 	*)  echo "Unknown targetrun '$targetrun'" >&4
+ 	    exit 1
+ 	    ;;
+@@ -5048,7 +5059,7 @@
+ echo " ";
+ echo "Checking if your compiler accepts $flag" 2>&1;
+ echo "int main(void) { return 0; }" > gcctest.c;
+-if $cc -O2 $flag -o gcctest gcctest.c 2>gcctest.out && ./gcctest; then
++if $cc -O2 $flag -o gcctest gcctest.c 2>gcctest.out && $run ./gcctest; then
+     echo "Yes, it does." 2>&1;
+     if $test -s gcctest.out ; then
+         echo "But your platform does not like it:";
diff --git a/package/perl/perl-make-ext.patch b/package/perl/perl-make-ext.patch
new file mode 100644
index 0000000..e0195e7
--- /dev/null
+++ b/package/perl/perl-make-ext.patch
@@ -0,0 +1,24 @@
+Don't use RUN with make (only for perl)
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/make_ext.pl
+===================================================================
+--- a/make_ext.pl
++++ b/make_ext.pl
+@@ -458,11 +458,13 @@
+ 	# Give makefile an opportunity to rewrite itself.
+ 	# reassure users that life goes on...
+ 	my @args = ('config', @$pass_through);
+-	system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
++#	system(@run, @make, @args) and print "@run @make @args failed, continuing anyway...\n";
++	system(@make, @args) and print "@make @args failed, continuing anyway...\n";
+     }
+     my @targ = ($target, @$pass_through);
+     print "Making $target in $ext_dir\n at run @make @targ\n";
+-    my $code = system(@run, @make, @targ);
++#    my $code = system(@run, @make, @targ);
++    my $code = system(@make, @targ);
+     die "Unsuccessful make($ext_dir): code=$code" if $code != 0;
+ 
+     chdir $return_dir || die "Cannot cd to $return_dir: $!";
diff --git a/package/perl/perl-mkppport.patch b/package/perl/perl-mkppport.patch
new file mode 100644
index 0000000..97f27a2
--- /dev/null
+++ b/package/perl/perl-mkppport.patch
@@ -0,0 +1,37 @@
+Add RUN
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/mkppport
+===================================================================
+--- a/mkppport
++++ b/mkppport
+@@ -1,6 +1,7 @@
+ use strict;
+ use warnings;
+ 
++use Config;
+ use Getopt::Long;
+ use File::Spec;
+ use File::Compare qw( compare );
+@@ -136,14 +137,18 @@
+ #----------------------------------------------
+ sub run
+ {
++  my @run = $Config{run};
++  @run = () if not defined $run[0] or $run[0] eq '';
+   my @args = ("-I" . File::Spec->catdir((File::Spec->updir) x 2, 'lib'), @_);
+   my $run = $perl =~ m/\s/ ? qq("$perl") : $perl;
+   for (@args) {
+     $_ = qq("$_") if $^O eq 'VMS' && /^[^"]/;
+     $run .= " $_";
+   }
+-  print "running $run\n";
+-  system $run and die "$run failed: $?\n";
++#  print "running $run\n";
++#  system $run and die "$run failed: $?\n";
++  print "running ", join(' ', @run, $run), "\n";
++  system join(' ', @run, $run) and die "@run $run failed: $?\n";
+ }
+ 
+ __END__
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
new file mode 100644
index 0000000..7ac1aed
--- /dev/null
+++ b/package/perl/perl.mk
@@ -0,0 +1,99 @@
+#############################################################
+#
+# perl
+#
+#############################################################
+
+PERL_VERSION_MAJOR = 16
+PERL_VERSION = 5.$(PERL_VERSION_MAJOR).1
+PERL_SITE = http://www.cpan.org/src/5.0
+PERL_SOURCE = perl-$(PERL_VERSION).tar.bz2
+PERL_LICENSE = Artistic
+PERL_LICENSE_FILES = Artistic
+PERL_INSTALL_STAGING = YES
+PERL_DEPENDENCIES = host-qemu
+
+PERL_CONF_OPT = -des \
+		-Dusecrosscompile \
+		-Dtargetrun=$(QEMU_USER) \
+		-Dqemulib=$(STAGING_DIR) \
+		-Dar="$(TARGET_AR)" \
+		-Dcc="$(TARGET_CC)" \
+		-Dcpp="$(TARGET_CC)" \
+		-Dld="$(TARGET_LD)" \
+		-Dnm="$(TARGET_NM)" \
+		-Dranlib="$(TARGET_RANLIB)" \
+		-Dccflags="$(TARGET_CFLAGS)" \
+		-Dldflags="$(TARGET_LDFLAGS) -lgcc_s -lm" \
+		-Dlddlflags="-shared" \
+		-Dlibc=$(STAGING_DIR)/lib/libc.so \
+		-Duseshrplib \
+		-Dprefix=/usr \
+		-Uoptimize
+
+ifeq ($(shell expr $(PERL_VERSION_MAJOR) % 2), 1)
+    PERL_CONF_OPT += -Dusedevel
+endif
+
+ifneq ($(BR2_LARGEFILE),y)
+    PERL_CONF_OPT += -Uuselargefiles
+endif
+
+define PERL_CONFIGURE_CMDS
+	rm -f $(@D)/config.sh
+	(cd $(@D); ./Configure $(PERL_CONF_OPT))
+	echo "# patched values"                                 >>$(@D)/config.sh
+	$(SED) '/^myarchname=/d' \
+		-e '/^mydomain=/d' \
+		-e '/^myhostname=/d' \
+		-e '/^myuname=/d' \
+		-e '/^osname=/d' \
+		-e '/^osvers=/d' \
+		-e '/^perladmin=/d' \
+		$(@D)/config.sh
+	echo "myarchname='$(GNU_TARGET_NAME)'"                  >>$(@D)/config.sh
+	echo "mydomain=''"                                      >>$(@D)/config.sh
+	echo "myhostname='$(BR2_TARGET_GENERIC_HOSTNAME)'"      >>$(@D)/config.sh
+	echo "myuname='Buildroot $(BR2_VERSION_FULL)'"          >>$(@D)/config.sh
+	echo "osname='linux'"                                   >>$(@D)/config.sh
+	echo "osvers='$(BR2_LINUX_KERNEL_VERSION)'"             >>$(@D)/config.sh
+	echo "perladmin='root'"                                 >>$(@D)/config.sh
+	(cd $(@D); ./Configure -S)
+	cp $(@D)/config.h $(@D)/xconfig.h
+	$(SED) 's/UNKNOWN-/Buildroot $(BR2_VERSION_FULL) /' $(@D)/patchlevel.h
+endef
+
+define PERL_BUILD_CMDS
+	echo "#!/bin/sh"                                > $(@D)/Cross/miniperl
+	echo "$(QEMU_USER) $(@D)/miniperl \"\$$@\""     >>$(@D)/Cross/miniperl
+	chmod +x $(@D)/Cross/miniperl
+	PERL_MM_OPT="PERL=$(@D)/Cross/miniperl" \
+		$(MAKE) -C $(@D) all
+endef
+
+define PERL_INSTALL_STAGING_CMDS
+	$(MAKE) INSTALL_DEPENDENCE= \
+		INSTALLFLAGS= \
+		DESTDIR="$(STAGING_DIR)" \
+		-C $(@D) install.perl
+endef
+
+PERL_RUN_PERL = $(QEMU_USER) $(@D)/perl -Ilib
+PERL_ARCHNAME = $(shell $(PERL_RUN_PERL) -MConfig -e "print Config->{archname}")
+PERL_LIB = $(TARGET_DIR)/usr/lib/perl5/$(PERL_VERSION)
+PERL_ARCHLIB = $(PERL_LIB)/$(PERL_ARCHNAME)
+
+define PERL_INSTALL_TARGET_CMDS
+	$(MAKE) INSTALL_DEPENDENCE= \
+		INSTALLFLAGS=-p \
+		DESTDIR="$(TARGET_DIR)" \
+		-C $(@D) install.perl
+	rm -f $(PERL_ARCHLIB)/CORE/*.h
+	find $(PERL_ARCHLIB) -type f -name *.bs -exec rm -f {} \;
+endef
+
+define PERL_CLEAN_CMDS
+	-$(MAKE) -C $(@D) clean
+endef
+
+$(eval $(generic-package))
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 03/10] perl: add DB_File
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 02/10] perl: " Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 04/10] gdbm: new package Francois Perrad
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/perl/Config.in |   10 ++++++++++
 package/perl/perl.mk   |    4 ++++
 2 files changed, 14 insertions(+)

diff --git a/package/perl/Config.in b/package/perl/Config.in
index 0a41a97..6cb89f0 100644
--- a/package/perl/Config.in
+++ b/package/perl/Config.in
@@ -14,5 +14,15 @@ config BR2_PACKAGE_PERL
 
 	  http://www.perl.org/
 
+if BR2_PACKAGE_PERL
+
+config BR2_PACKAGE_PERL_DB_FILE
+	bool "DB_File"
+	select BR2_PACKAGE_BERKELEYDB
+	help
+	  Build the DB_File module.
+
+endif
+
 comment "perl requires an architecture supported by qemu"
 	depends on BR2_avr32 || BR2_bfin || BR2_sh2 || BR2_sh2a || BR2_sh3 || BR2_sh3eb || BR2_sh64
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
index 7ac1aed..186158b 100644
--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -11,7 +11,11 @@ PERL_SOURCE = perl-$(PERL_VERSION).tar.bz2
 PERL_LICENSE = Artistic
 PERL_LICENSE_FILES = Artistic
 PERL_INSTALL_STAGING = YES
+
 PERL_DEPENDENCIES = host-qemu
+ifeq ($(BR2_PACKAGE_BERKELEYDB),y)
+    PERL_DEPENDENCIES += berkeleydb
+endif
 
 PERL_CONF_OPT = -des \
 		-Dusecrosscompile \
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 04/10] gdbm: new package
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 02/10] perl: " Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 03/10] perl: add DB_File Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 05/10] perl: add GDBM_File Francois Perrad
                   ` (5 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/Config.in      |    1 +
 package/gdbm/Config.in |    8 ++++++++
 package/gdbm/gdbm.mk   |   12 ++++++++++++
 3 files changed, 21 insertions(+)
 create mode 100644 package/gdbm/Config.in
 create mode 100644 package/gdbm/gdbm.mk

diff --git a/package/Config.in b/package/Config.in
index 00a79ab..d9cadf9 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -324,6 +324,7 @@ endmenu
 
 menu "Database"
 source "package/berkeleydb/Config.in"
+source "package/gdbm/Config.in"
 source "package/mysql_client/Config.in"
 source "package/sqlcipher/Config.in"
 source "package/sqlite/Config.in"
diff --git a/package/gdbm/Config.in b/package/gdbm/Config.in
new file mode 100644
index 0000000..d5aae83
--- /dev/null
+++ b/package/gdbm/Config.in
@@ -0,0 +1,8 @@
+config BR2_PACKAGE_GDBM
+	bool "gdbm"
+	help
+	  GNU dbm is a set of database routines that use extensible hashing.
+	  It works similar to the standard UNIX dbm routines.
+
+	  http://www.gnu.org/software/gdbm/gdbm.html
+
diff --git a/package/gdbm/gdbm.mk b/package/gdbm/gdbm.mk
new file mode 100644
index 0000000..4971b12
--- /dev/null
+++ b/package/gdbm/gdbm.mk
@@ -0,0 +1,12 @@
+#############################################################
+#
+# gdbm
+#
+#############################################################
+GDBM_VERSION = 1.10
+GDBM_SITE = $(BR2_GNU_MIRROR)/gdbm
+GDBM_LICENSE = GPLv3
+GDBM_LICENSE_FILES = COPYING
+GDBM_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 05/10] perl: add GDBM_File
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
                   ` (2 preceding siblings ...)
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 04/10] gdbm: new package Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 06/10] perl: add option "custom install" Francois Perrad
                   ` (4 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/perl/Config.in |    6 ++++++
 package/perl/perl.mk   |    3 +++
 2 files changed, 9 insertions(+)

diff --git a/package/perl/Config.in b/package/perl/Config.in
index 6cb89f0..98b41da 100644
--- a/package/perl/Config.in
+++ b/package/perl/Config.in
@@ -22,6 +22,12 @@ config BR2_PACKAGE_PERL_DB_FILE
 	help
 	  Build the DB_File module.
 
+config BR2_PACKAGE_PERL_GDBM_FILE
+	bool "GDBM_File"
+	select BR2_PACKAGE_GDBM
+	help
+	  Build the GDBM_File module.
+
 endif
 
 comment "perl requires an architecture supported by qemu"
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
index 186158b..56abbc1 100644
--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -16,6 +16,9 @@ PERL_DEPENDENCIES = host-qemu
 ifeq ($(BR2_PACKAGE_BERKELEYDB),y)
     PERL_DEPENDENCIES += berkeleydb
 endif
+ifeq ($(BR2_PACKAGE_GDBM),y)
+    PERL_DEPENDENCIES += gdbm
+endif
 
 PERL_CONF_OPT = -des \
 		-Dusecrosscompile \
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 06/10] perl: add option "custom install"
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
                   ` (3 preceding siblings ...)
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 05/10] perl: add GDBM_File Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 07/10] perl: relax microperl dependencies Francois Perrad
                   ` (3 subsequent siblings)
  8 siblings, 0 replies; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

allows same behaviour (and footprint) as microperl

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/perl/Config.in |   16 ++++++++++++++++
 package/perl/perl.mk   |   32 ++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)

diff --git a/package/perl/Config.in b/package/perl/Config.in
index 98b41da..0642deb 100644
--- a/package/perl/Config.in
+++ b/package/perl/Config.in
@@ -16,6 +16,22 @@ config BR2_PACKAGE_PERL
 
 if BR2_PACKAGE_PERL
 
+config BR2_PACKAGE_PERL_CUSTOM_INSTALL
+	bool "custom install"
+	help
+	  Don't use the full install target
+	  Install only a selection of modules (like microperl).
+
+config BR2_PACKAGE_PERL_MODULES
+	string "additional modules"
+	depends on BR2_PACKAGE_PERL_CUSTOM_INSTALL
+	help
+	  List of space-separated perl modules to copy to the rootfs.
+
+	  Examples: constant.pm Getopt/Std.pm Time/Local.pm
+
+	  Module dependencies are not automatic so check your needs.
+
 config BR2_PACKAGE_PERL_DB_FILE
 	bool "DB_File"
 	select BR2_PACKAGE_BERKELEYDB
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
index 56abbc1..81dff04 100644
--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -89,7 +89,38 @@ PERL_RUN_PERL = $(QEMU_USER) $(@D)/perl -Ilib
 PERL_ARCHNAME = $(shell $(PERL_RUN_PERL) -MConfig -e "print Config->{archname}")
 PERL_LIB = $(TARGET_DIR)/usr/lib/perl5/$(PERL_VERSION)
 PERL_ARCHLIB = $(PERL_LIB)/$(PERL_ARCHNAME)
+PERL_MODS = $(call qstrip,$(BR2_PACKAGE_PERL_MODULES))
+# Minimal set of modules required for 'perl -V' to work
+PERL_ARCH_MODS = Config.pm Config_git.pl Config_heavy.pl
+PERL_BASE_MODS = strict.pm vars.pm warnings.pm warnings/register.pm
 
+define PERL_INSTALL_MODULES
+	for i in $(PERL_ARCH_MODS); do \
+		$(INSTALL) -m 0644 -D $(@D)/lib/$$i $(PERL_ARCHLIB)/$$i; \
+	done
+	for i in $(PERL_BASE_MODS); do \
+		$(INSTALL) -m 0644 -D $(@D)/lib/$$i $(PERL_LIB)/$$i; \
+	done
+	for i in $(PERL_MODS); do \
+		j=`echo $$i|cut -d : -f 1` ; \
+		if [ -d $(@D)/lib/$$j ] ; then \
+			cp -af $(@D)/lib/$$j $(PERL_LIB) ; \
+		fi ; \
+		if [ -f $(@D)/lib/$$i ] ; then \
+			$(INSTALL) -m 0644 -D $(@D)/lib/$$i $(PERL_LIB)/$$i; \
+		fi ; \
+	done
+	# Remove test files
+	find $(PERL_LIB) -type f -name *.t -exec rm -f {} \;
+endef
+
+ifeq ($(BR2_PACKAGE_PERL_CUSTOM_INSTALL),y)
+define PERL_INSTALL_TARGET_CMDS
+	$(INSTALL) -m 0755 -D $(@D)/perl $(TARGET_DIR)/usr/bin/perl
+	$(INSTALL) -m 0755 -D $(@D)/libperl.so $(PERL_ARCHLIB)/CORE/libperl.so
+	$(PERL_INSTALL_MODULES)
+endef
+else
 define PERL_INSTALL_TARGET_CMDS
 	$(MAKE) INSTALL_DEPENDENCE= \
 		INSTALLFLAGS=-p \
@@ -98,6 +129,7 @@ define PERL_INSTALL_TARGET_CMDS
 	rm -f $(PERL_ARCHLIB)/CORE/*.h
 	find $(PERL_ARCHLIB) -type f -name *.bs -exec rm -f {} \;
 endef
+endif
 
 define PERL_CLEAN_CMDS
 	-$(MAKE) -C $(@D) clean
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 07/10] perl: relax microperl dependencies
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
                   ` (4 preceding siblings ...)
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 06/10] perl: add option "custom install" Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-12 16:37   ` Thomas Petazzoni
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 08/10] microperl: mark as DEPRECATED Francois Perrad
                   ` (2 subsequent siblings)
  8 siblings, 1 reply; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/autoconf/Config.in   |    2 +-
 package/autoconf/autoconf.mk |    7 ++++++-
 package/automake/Config.in   |    2 +-
 package/automake/automake.mk |    7 ++++++-
 package/ntp/Config.in        |    4 ++--
 package/samba/Config.in      |    4 ++--
 6 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/package/autoconf/Config.in b/package/autoconf/Config.in
index 00b3e2c..41866ad 100644
--- a/package/autoconf/Config.in
+++ b/package/autoconf/Config.in
@@ -1,6 +1,6 @@
 config BR2_PACKAGE_AUTOCONF
 	bool "autoconf"
-	select BR2_PACKAGE_MICROPERL
+	select BR2_PACKAGE_MICROPERL if !BR2_PACKAGE_PERL
 	help
 	  Extensible program for developing configure scripts.  These
 	  scripts handle all the mundane system/feature detection.
diff --git a/package/autoconf/autoconf.mk b/package/autoconf/autoconf.mk
index 3f84e3e..13a474e 100644
--- a/package/autoconf/autoconf.mk
+++ b/package/autoconf/autoconf.mk
@@ -10,7 +10,12 @@ AUTOCONF_SITE = $(BR2_GNU_MIRROR)/autoconf
 AUTOCONF_CONF_ENV = EMACS="no" ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 		    ac_cv_prog_gnu_m4_gnu=no
 
-AUTOCONF_DEPENDENCIES = microperl host-m4
+AUTOCONF_DEPENDENCIES = host-m4
+ifeq ($(BR2_PACKAGE_PERL),y)
+    AUTOCONF_DEPENDENCIES += perl
+else
+    AUTOCONF_DEPENDENCIES += microperl
+endif
 
 HOST_AUTOCONF_CONF_ENV = ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 			ac_cv_prog_gnu_m4_gnu=no
diff --git a/package/automake/Config.in b/package/automake/Config.in
index 935f1f1..c0b29d1 100644
--- a/package/automake/Config.in
+++ b/package/automake/Config.in
@@ -1,7 +1,7 @@
 config BR2_PACKAGE_AUTOMAKE
 	bool "automake"
 	select BR2_PACKAGE_AUTOCONF
-	select BR2_PACKAGE_MICROPERL
+	select BR2_PACKAGE_MICROPERL if !BR2_PACKAGE_PERL
 	help
 	  Tool for automatically generating Makefile's for input to
 	  configure scripts (made by autoconf).
diff --git a/package/automake/automake.mk b/package/automake/automake.mk
index 3c19085..0766111 100644
--- a/package/automake/automake.mk
+++ b/package/automake/automake.mk
@@ -7,7 +7,12 @@
 AUTOMAKE_VERSION = 1.11.5
 AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake
 
-AUTOMAKE_DEPENDENCIES = host-autoconf autoconf microperl
+AUTOMAKE_DEPENDENCIES = host-autoconf autoconf
+ifeq ($(BR2_PACKAGE_PERL),y)
+    AUTOMAKE_DEPENDENCIES += perl
+else
+    AUTOMAKE_DEPENDENCIES += microperl
+endif
 
 HOST_AUTOMAKE_DEPENDENCIES = host-autoconf
 
diff --git a/package/ntp/Config.in b/package/ntp/Config.in
index 5996596..434cd2d 100644
--- a/package/ntp/Config.in
+++ b/package/ntp/Config.in
@@ -20,7 +20,7 @@ config BR2_PACKAGE_NTP_NTP_KEYGEN
 
 config BR2_PACKAGE_NTP_NTP_WAIT
 	bool "ntp-wait"
-	depends on BR2_PACKAGE_MICROPERL
+	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
 	help
 	  ntp-wait waits until the locally running ntpd is in state 4
 	  (synchronized). This could be useful at boot time, to delay the
@@ -59,7 +59,7 @@ config BR2_PACKAGE_NTP_NTPSNMPD
 
 config BR2_PACKAGE_NTP_NTPTRACE
 	bool "ntptrace"
-	depends on BR2_PACKAGE_MICROPERL
+	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
 	help
 	  ntptrace is a perl script that uses the ntpq utility program to
 	  follow the chain of NTP servers from a given host back to the
diff --git a/package/samba/Config.in b/package/samba/Config.in
index e88b360..ee3244f 100644
--- a/package/samba/Config.in
+++ b/package/samba/Config.in
@@ -36,12 +36,12 @@ config BR2_PACKAGE_SAMBA_FINDSMB
 	default y
 	depends on BR2_PACKAGE_SAMBA_SMBCLIENT
 	depends on BR2_PACKAGE_SAMBA_NMBLOOKUP
-	depends on BR2_PACKAGE_MICROPERL
+	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
 	help
 	  Script to browse network
 
 comment "findsmb       - disabled (requires nmblookup, smbclient and perl)"
-	depends on !BR2_PACKAGE_SAMBA_SMBCLIENT || !BR2_PACKAGE_SAMBA_NMBLOOKUP || !BR2_PACKAGE_MICROPERL
+	depends on !BR2_PACKAGE_SAMBA_SMBCLIENT || !BR2_PACKAGE_SAMBA_NMBLOOKUP || !(BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL)
 
 config BR2_PACKAGE_SAMBA_NET
 	bool "net"
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 08/10] microperl: mark as DEPRECATED
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
                   ` (5 preceding siblings ...)
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 07/10] perl: relax microperl dependencies Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-12 16:37   ` Thomas Petazzoni
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 09/10] cpanminus: new package Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 10/10] microperl: remove it Francois Perrad
  8 siblings, 1 reply; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/microperl/Config.in |    1 +
 1 file changed, 1 insertion(+)

diff --git a/package/microperl/Config.in b/package/microperl/Config.in
index 66bbedd..19d104a 100644
--- a/package/microperl/Config.in
+++ b/package/microperl/Config.in
@@ -2,6 +2,7 @@ config BR2_PACKAGE_MICROPERL
 	bool "microperl"
 	# needs fork()
 	depends on BR2_USE_MMU
+	depends on BR2_DEPRECATED
 	help
 	  Perl without operating-specific functions such as readdir.
 
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 09/10] cpanminus: new package
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
                   ` (6 preceding siblings ...)
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 08/10] microperl: mark as DEPRECATED Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 10/10] microperl: remove it Francois Perrad
  8 siblings, 0 replies; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/Config.in                        |    5 ++++
 package/cpanminus/Config.in              |   36 +++++++++++++++++++++++
 package/cpanminus/cpanminus.mk           |   47 ++++++++++++++++++++++++++++++
 package/perl/perl-fix-Module-Build.patch |   16 ++++++++++
 4 files changed, 104 insertions(+)
 create mode 100644 package/cpanminus/Config.in
 create mode 100644 package/cpanminus/cpanminus.mk
 create mode 100644 package/perl/perl-fix-Module-Build.patch

diff --git a/package/Config.in b/package/Config.in
index d9cadf9..06050f2 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -263,6 +263,11 @@ source "package/xavante/Config.in"
 endmenu
 endif
 source "package/perl/Config.in"
+if BR2_PACKAGE_PERL
+menu "Perl libraries/modules"
+source "package/cpanminus/Config.in"
+endmenu
+endif
 source "package/microperl/Config.in"
 source "package/php/Config.in"
 source "package/python/Config.in"
diff --git a/package/cpanminus/Config.in b/package/cpanminus/Config.in
new file mode 100644
index 0000000..b8b39dc
--- /dev/null
+++ b/package/cpanminus/Config.in
@@ -0,0 +1,36 @@
+config BR2_PACKAGE_CPANMINUS
+	bool "cpanminus"
+	help
+	  cpanminus is a script to get, unpack, build and install Perl modules
+	  from CPAN.
+
+	  Why? It's dependency free, requires zero configuration, and stands
+	  alone. When running, it requires only 10MB of RAM.
+
+	  http://github.com/miyagawa/cpanminus
+
+if BR2_PACKAGE_CPANMINUS
+
+config BR2_PACKAGE_CPANMINUS_MIRROR
+	string "mirror"
+	help
+	  Specifies the base URL for the CPAN mirror to use,
+	  such as http://cpan.cpantesters.org/.
+
+config BR2_PACKAGE_CPANMINUS_MODULES
+	string "Perl modules from CPAN"
+	default "Curses::UI"
+	help
+	  List of space-separated Perl modules to install from CPAN.
+
+	  Examples: Try::Tiny Dancer YAML Moo
+
+	  Install the listed modules and their dependencies.
+
+config BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES
+	string "native dependencies"
+	default "ncurses"
+	help
+	  Some XS modules require native libraries.
+
+endif
diff --git a/package/cpanminus/cpanminus.mk b/package/cpanminus/cpanminus.mk
new file mode 100644
index 0000000..d3a338b
--- /dev/null
+++ b/package/cpanminus/cpanminus.mk
@@ -0,0 +1,47 @@
+#############################################################
+#
+# cpanminus
+#
+#############################################################
+
+CPANMINUS_VERSION = 1.5018
+CPANMINUS_SOURCE = miyagawa-cpanminus-$(CPANMINUS_VERSION)-0-gee6cd30.tar.gz
+CPANMINUS_SITE = https://github.com/miyagawa/cpanminus/tarball/$(CPANMINUS_VERSION)
+CPANMINUS_DEPENDENCIES = perl $(call qstrip,$(BR2_PACKAGE_CPANMINUS_NATIVE_DEPENDENCIES))
+
+CPANMINUS_RUN_PERL = $(QEMU_USER) $(STAGING_DIR)/usr/bin/perl
+CPANMINUS_ARCHNAME = $(shell $(CPANMINUS_RUN_PERL) -MConfig -e "print Config->{archname}")
+CPANMINUS_PERL_LIB      = $(STAGING_DIR)/usr/lib/perl5/$(PERL_VERSION)
+CPANMINUS_PERL_SITELIB  = $(TARGET_DIR)/usr/lib/perl5/site_perl/$(PERL_VERSION)
+CPANMINUS_PERL_ARCHLIB  = $(CPANMINUS_PERL_LIB)/$(CPANMINUS_ARCHNAME)
+CPANMINUS_PERL_SITEARCH = $(CPANMINUS_PERL_SITELIB)/$(CPANMINUS_ARCHNAME)
+CPANMINUS_PERL5LIB = $(CPANMINUS_PERL_SITEARCH):$(CPANMINUS_PERL_SITELIB):$(CPANMINUS_PERL_ARCHLIB):$(CPANMINUS_PERL_LIB)
+ifneq ($(BR2_PACKAGE_CPANMINUS_MIRROR),"")
+    CPANMINUS_MIRROR = --mirror $(call qstrip,$(BR2_PACKAGE_CPANMINUS_MIRROR)) --mirror-only
+endif
+CPANMINUS_MODULES = $(call qstrip,$(BR2_PACKAGE_CPANMINUS_MODULES))
+
+ifneq ($(CPANMINUS_MODULES),)
+define CPANMINUS_INSTALL_TARGET_CMDS
+	echo "#!/bin/sh"                                                        > $(@D)/run_perl
+	echo "PERL5LIB=$(CPANMINUS_PERL5LIB) $(CPANMINUS_RUN_PERL) \"\$$@\""    >>$(@D)/run_perl
+	chmod +x $(@D)/run_perl
+	PERL5LIB=$(CPANMINUS_PERL5LIB) \
+	PERL_MM_OPT="DESTDIR=$(TARGET_DIR) PERL=$(@D)/run_perl PERL_LIB=$(CPANMINUS_PERL_LIB) PERL_ARCHLIB=$(CPANMINUS_PERL_ARCHLIB)" \
+	PERL_MB_OPT="--destdir $(TARGET_DIR)" \
+	RUN_PERL="$(@D)/run_perl" \
+	$(CPANMINUS_RUN_PERL) $(@D)/cpanm \
+		--perl=$(@D)/run_perl \
+		--notest \
+		--no-man-pages \
+		$(CPANMINUS_MIRROR) \
+		$(call qstrip,$(BR2_PACKAGE_CPANMINUS_MODULES))
+	find $(CPANMINUS_PERL_SITEARCH) -type f -name *.bs -exec rm -f {} \;
+endef
+else
+define CPANMINUS_INSTALL_TARGET_CMDS
+	@echo "No modules to install"
+endef
+endif
+
+$(eval $(generic-package))
diff --git a/package/perl/perl-fix-Module-Build.patch b/package/perl/perl-fix-Module-Build.patch
new file mode 100644
index 0000000..26b15e4
--- /dev/null
+++ b/package/perl/perl-fix-Module-Build.patch
@@ -0,0 +1,16 @@
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/cpan/Module-Build/lib/Module/Build/Base.pm
+===================================================================
+--- a/cpan/Module-Build/lib/Module/Build/Base.pm
++++ b/cpan/Module-Build/lib/Module/Build/Base.pm
+@@ -456,7 +456,7 @@
+   my $proto = shift;
+   my $c     = ref($proto) ? $proto->{config} : 'Module::Build::Config';
+ 
+-  my $perl  = $^X;
++  my $perl  = $ENV{RUN_PERL} || $^X;
+   my $perl_basename = File::Basename::basename($perl);
+ 
+   my @potential_perls;
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 10/10] microperl: remove it
  2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
                   ` (7 preceding siblings ...)
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 09/10] cpanminus: new package Francois Perrad
@ 2012-10-10 15:06 ` Francois Perrad
  2012-10-12 16:39   ` Thomas Petazzoni
  8 siblings, 1 reply; 13+ messages in thread
From: Francois Perrad @ 2012-10-10 15:06 UTC (permalink / raw)
  To: buildroot

replaced by perl
use BR2_PACKAGE_PERL_CUSTOM_INSTALL if you want a small footprint

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
 package/Config.in                                  |    1 -
 package/autoconf/Config.in                         |    2 +-
 package/autoconf/autoconf.mk                       |    7 +-
 package/automake/Config.in                         |    2 +-
 package/automake/automake.mk                       |    7 +-
 package/libxml-parser-perl/libxml-parser-perl.mk   |    6 -
 package/microperl/Config.in                        |   30 ----
 .../microperl/microperl-no-signal-handlers.patch   |   22 ---
 package/microperl/microperl-uudmap.patch           |   47 ------
 package/microperl/microperl.mk                     |  156 --------------------
 package/ntp/Config.in                              |    4 +-
 package/samba/Config.in                            |    4 +-
 12 files changed, 8 insertions(+), 280 deletions(-)
 delete mode 100644 package/microperl/Config.in
 delete mode 100644 package/microperl/microperl-no-signal-handlers.patch
 delete mode 100644 package/microperl/microperl-uudmap.patch
 delete mode 100644 package/microperl/microperl.mk

diff --git a/package/Config.in b/package/Config.in
index 06050f2..987d1d1 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -268,7 +268,6 @@ menu "Perl libraries/modules"
 source "package/cpanminus/Config.in"
 endmenu
 endif
-source "package/microperl/Config.in"
 source "package/php/Config.in"
 source "package/python/Config.in"
 if BR2_PACKAGE_PYTHON
diff --git a/package/autoconf/Config.in b/package/autoconf/Config.in
index 41866ad..5f2f148 100644
--- a/package/autoconf/Config.in
+++ b/package/autoconf/Config.in
@@ -1,6 +1,6 @@
 config BR2_PACKAGE_AUTOCONF
 	bool "autoconf"
-	select BR2_PACKAGE_MICROPERL if !BR2_PACKAGE_PERL
+	select BR2_PACKAGE_PERL
 	help
 	  Extensible program for developing configure scripts.  These
 	  scripts handle all the mundane system/feature detection.
diff --git a/package/autoconf/autoconf.mk b/package/autoconf/autoconf.mk
index 13a474e..0cb50db 100644
--- a/package/autoconf/autoconf.mk
+++ b/package/autoconf/autoconf.mk
@@ -10,12 +10,7 @@ AUTOCONF_SITE = $(BR2_GNU_MIRROR)/autoconf
 AUTOCONF_CONF_ENV = EMACS="no" ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 		    ac_cv_prog_gnu_m4_gnu=no
 
-AUTOCONF_DEPENDENCIES = host-m4
-ifeq ($(BR2_PACKAGE_PERL),y)
-    AUTOCONF_DEPENDENCIES += perl
-else
-    AUTOCONF_DEPENDENCIES += microperl
-endif
+AUTOCONF_DEPENDENCIES = host-m4 perl
 
 HOST_AUTOCONF_CONF_ENV = ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \
 			ac_cv_prog_gnu_m4_gnu=no
diff --git a/package/automake/Config.in b/package/automake/Config.in
index c0b29d1..9a9673a 100644
--- a/package/automake/Config.in
+++ b/package/automake/Config.in
@@ -1,7 +1,7 @@
 config BR2_PACKAGE_AUTOMAKE
 	bool "automake"
 	select BR2_PACKAGE_AUTOCONF
-	select BR2_PACKAGE_MICROPERL if !BR2_PACKAGE_PERL
+	select BR2_PACKAGE_PERL
 	help
 	  Tool for automatically generating Makefile's for input to
 	  configure scripts (made by autoconf).
diff --git a/package/automake/automake.mk b/package/automake/automake.mk
index 0766111..8be56c3 100644
--- a/package/automake/automake.mk
+++ b/package/automake/automake.mk
@@ -7,12 +7,7 @@
 AUTOMAKE_VERSION = 1.11.5
 AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake
 
-AUTOMAKE_DEPENDENCIES = host-autoconf autoconf
-ifeq ($(BR2_PACKAGE_PERL),y)
-    AUTOMAKE_DEPENDENCIES += perl
-else
-    AUTOMAKE_DEPENDENCIES += microperl
-endif
+AUTOMAKE_DEPENDENCIES = host-autoconf autoconf perl
 
 HOST_AUTOMAKE_DEPENDENCIES = host-autoconf
 
diff --git a/package/libxml-parser-perl/libxml-parser-perl.mk b/package/libxml-parser-perl/libxml-parser-perl.mk
index a6f8ae9..8e2f899 100644
--- a/package/libxml-parser-perl/libxml-parser-perl.mk
+++ b/package/libxml-parser-perl/libxml-parser-perl.mk
@@ -9,12 +9,6 @@ LIBXML_PARSER_PERL_SITE:=http://www.cpan.org/modules/by-module/XML/
 
 LIBXML_PARSER_PERL_DEPENDENCIES = expat
 
-ifeq ($(BR2_PACKAGE_MICROPERL),y)
-# microperl builds host-microperl, so ensure we build after that to build
-# against host-microperl instead of the system perl
-LIBXML_PARSER_PERL_DEPENDENCIES += microperl
-endif
-
 define HOST_LIBXML_PARSER_PERL_CONFIGURE_CMDS
  (cd $(@D) ; \
    $(HOST_CONFIGURE_OPTS) perl Makefile.PL \
diff --git a/package/microperl/Config.in b/package/microperl/Config.in
deleted file mode 100644
index 19d104a..0000000
--- a/package/microperl/Config.in
+++ /dev/null
@@ -1,30 +0,0 @@
-config BR2_PACKAGE_MICROPERL
-	bool "microperl"
-	# needs fork()
-	depends on BR2_USE_MMU
-	depends on BR2_DEPRECATED
-	help
-	  Perl without operating-specific functions such as readdir.
-
-if BR2_PACKAGE_MICROPERL
-
-config BR2_PACKAGE_MICROPERL_MODULES
-	string "additional modules"
-	help
-	  List of space-separated microperl modules to copy to the rootfs.
-
-	  Examples: warnings.pm Getopt/Std.pm Time::Local
-
-	  Module dependencies are not automatic so check your needs.
-	  You can't use XS modules like IO.
-
-menu "module bundles"
-
-config BR2_PACKAGE_MICROPERL_BUNDLE_CGI
-	bool "CGI"
-	help
-	  Copy required modules to do CGI scripting.
-
-endmenu
-
-endif
diff --git a/package/microperl/microperl-no-signal-handlers.patch b/package/microperl/microperl-no-signal-handlers.patch
deleted file mode 100644
index 3c9aa41..0000000
--- a/package/microperl/microperl-no-signal-handlers.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Backport of http://perl5.git.perl.org/perl.git/commitdiff/01d65469392dfc0a?hp=a82b5f080d91ffe184d8ac4795ac71e72e612c2f
-
-Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
-
-diff -Nura perl-5.12.3/miniperlmain.c perl-5.12.3-nosig/miniperlmain.c
---- perl-5.12.3/miniperlmain.c	2011-01-09 17:20:57.000000000 -0300
-+++ perl-5.12.3-nosig/miniperlmain.c	2011-04-14 10:16:53.564639438 -0300
-@@ -116,12 +116,14 @@
-     if (!exitstatus)
-         perl_run(my_perl);
- 
-+#ifndef PERL_MICRO
-     /* Unregister our signal handler before destroying my_perl */
-     for (i = 0; PL_sig_name[i]; i++) {
- 	if (rsignal_state(PL_sig_num[i]) == (Sighandler_t) PL_csighandlerp) {
- 	    rsignal(PL_sig_num[i], (Sighandler_t) SIG_DFL);
- 	}
-     }
-+#endif
- 
-     exitstatus = perl_destruct(my_perl);
- 
diff --git a/package/microperl/microperl-uudmap.patch b/package/microperl/microperl-uudmap.patch
deleted file mode 100644
index c72f9c9..0000000
--- a/package/microperl/microperl-uudmap.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From a82b5f080d91ffe184d8ac4795ac71e72e612c2f Mon Sep 17 00:00:00 2001
-From: David Leadbeater <dgl@dgl.cx>
-Date: Mon, 7 Mar 2011 18:40:55 +0000
-Subject: [PATCH] microperl: Update generate_uudmap in Makefile.micro
-
-Makefile.micro hadn't kept up with the changes for generate_uudmap,
-make it match the real Makefile.
----
- Makefile.micro |    8 ++++----
- 1 files changed, 4 insertions(+), 4 deletions(-)
-
-diff --git a/Makefile.micro b/Makefile.micro
-index 4b738f5..567d98a 100644
---- a/Makefile.micro
-+++ b/Makefile.micro
-@@ -35,7 +35,7 @@ H = av.h uconfig.h cop.h cv.h embed.h embedvar.h form.h gv.h handy.h \
- HE = $(H) EXTERN.h
- 
- clean:
--	-rm -f $(O) microperl generate_uudmap$(_X) uudmap.h
-+	-rm -f $(O) microperl generate_uudmap$(_X) uudmap.h bitcount.h
- 
- distclean:	clean
- 
-@@ -74,7 +74,7 @@ udoop$(_O):	$(HE) doop.c
- udump$(_O):	$(HE) dump.c regcomp.h regnodes.h
- 	$(CC) $(CCFLAGS) -o $@ $(CFLAGS) dump.c
- 
--uglobals$(_O):	$(H) globals.c INTERN.h perlapi.h
-+uglobals$(_O):	$(H) globals.c INTERN.h perlapi.h uudmap.h bitcount.h
- 	$(CC) $(CCFLAGS) -o $@ $(CFLAGS) globals.c
- 
- ugv$(_O):	$(HE) gv.c
-@@ -173,8 +173,8 @@ uutil$(_O):	$(HE) util.c
- uperlapi$(_O):	$(HE) perlapi.c perlapi.h
- 	$(CC) $(CCFLAGS) -o $@ $(CFLAGS) perlapi.c
- 
--uudmap.h: generate_uudmap$(_X)
--	$(RUN) ./generate_uudmap$(_X) >uudmap.h
-+uudmap.h bitcount.h: generate_uudmap$(_X)
-+	$(RUN) ./generate_uudmap$(_X) uudmap.h bitcount.h
- 
- generate_uudmap$(_O): generate_uudmap.c
- 	$(CC) $(CCFLAGS) -o $@ $(CFLAGS) generate_uudmap.c
--- 
-1.6.5.2.74.g610f9.dirty
-
diff --git a/package/microperl/microperl.mk b/package/microperl/microperl.mk
deleted file mode 100644
index b2a912a..0000000
--- a/package/microperl/microperl.mk
+++ /dev/null
@@ -1,156 +0,0 @@
-#############################################################
-#
-# microperl
-#
-#############################################################
-
-MICROPERL_VERSION = 5.12.4
-MICROPERL_SITE = http://www.cpan.org/src/5.0
-MICROPERL_SOURCE = perl-$(MICROPERL_VERSION).tar.bz2
-MICROPERL_LICENSE = Artistic
-MICROPERL_LICENSE_FILES = Artistic
-MICROPERL_DEPENDENCIES = host-microperl
-MICROPERL_MODS_DIR = /usr/lib/perl5/$(MICROPERL_VERSION)
-MICROPERL_ARCH_DIR = $(MICROPERL_MODS_DIR)/$(GNU_TARGET_NAME)
-MICROPERL_MODS = $(call qstrip,$(BR2_PACKAGE_MICROPERL_MODULES))
-
-# Minimal set of modules required for 'perl -V' to work
-MICROPERL_ARCH_MODS = Config.pm Config_git.pl Config_heavy.pl
-MICROPERL_BASE_MODS = strict.pm
-
-# CGI bundle
-ifeq ($(BR2_PACKAGE_MICROPERL_BUNDLE_CGI),y)
-MICROPERL_MODS += constant.pm CGI CGI.pm Carp.pm Exporter.pm overload.pm \
-	vars.pm warnings.pm warnings/register.pm
-endif
-
-# Host microperl is actually full-blown perl
-define HOST_MICROPERL_CONFIGURE_CMDS
-	cd $(@D) ; \
-	./Configure -Dcc="$(HOSTCC)" -Dprefix="$(HOST_DIR)/usr" \
-		-Dloclibpth='/lib /lib64 /usr/lib /usr/lib64' -des
-endef
-
-define HOST_MICROPERL_BUILD_CMDS
-	$(MAKE) -C $(@D)
-endef
-
-define HOST_MICROPERL_INSTALL_CMDS
-	$(MAKE) -C $(@D) install
-endef
-
-ifeq ($(BR2_ENDIAN),"BIG")
-define MICROPERL_BIGENDIAN
-	$(SED) '/^byteorder=/d' $(@D)/uconfig.sh
-	echo "byteorder='4321'" >>$(@D)/uconfig.sh
-endef
-endif
-
-ifeq ($(BR2_LARGEFILE),y)
-define MICROPERL_LARGEFILE
-	$(SED) '/^uselargefiles=/d' $(@D)/uconfig.sh
-	echo "uselargefiles='define'" >>$(@D)/uconfig.sh
-endef
-endif
-
-ifeq ($(BR2_USE_WCHAR),y)
-define MICROPERL_WCHAR
-	$(SED) '/^d_mbstowcs=/d' -e '/^d_mbtowc=/d' -e '/^d_wcstombs=/d' \
-		-e '/^d_wctomb=/d' $(@D)/uconfig.sh
-	echo "d_mbstowcs='define'" >>$(@D)/uconfig.sh
-	echo "d_mbtowc='define'" >>$(@D)/uconfig.sh
-	echo "d_wcstombs='define'" >>$(@D)/uconfig.sh
-	echo "d_wctomb='define'" >>$(@D)/uconfig.sh
-endef
-endif
-
-define MICROPERL_CONFIGURE_CMDS
-	$(SED) '/^archlib=/d' -e '/^archlibexp=/d' -e '/^optimize=/d' \
-		-e '/^archname=/d' -e '/^d_poll=/d' -e '/^i_poll=/d' \
-		-e '/^osname=/d' -e '/^u32type=/d' -e '/^d_archlib=/d' \
-		-e '/^d_memset=/d' -e '/^i_fcntl=/d' -e '/^useperlio=/d' \
-		-e '/^need_va_copy=/d' $(@D)/uconfig.sh
-	$(SED) 's/5.12/$(MICROPERL_VERSION)/' $(@D)/uconfig.sh
-	echo "archlib='$(MICROPERL_ARCH_DIR)'" >>$(@D)/uconfig.sh
-	echo "archlibexp='$(MICROPERL_ARCH_DIR)'" >>$(@D)/uconfig.sh
-	echo "d_archlib='define'" >>$(@D)/uconfig.sh
-	echo "archname='$(GNU_TARGET_NAME)'" >>$(@D)/uconfig.sh
-	echo "osname='linux'" >>$(@D)/uconfig.sh
-	echo "cc='$(TARGET_CC)'" >>$(@D)/uconfig.sh
-	echo "ccflags='$(TARGET_CFLAGS)'" >>$(@D)/uconfig.sh
-	echo "optimize='$(TARGET_CFLAGS)'" >>$(@D)/uconfig.sh
-	echo "usecrosscompile='define'" >>$(@D)/uconfig.sh
-	echo "d_memset='define'" >>$(@D)/uconfig.sh
-	echo "i_fcntl='define'" >>$(@D)/uconfig.sh
-	echo "useperlio='define'" >>$(@D)/uconfig.sh
-	echo "u32type='unsigned int'" >>$(@D)/uconfig.sh
-	echo "need_va_copy='define'" >>$(@D)/uconfig.sh
-	echo "d_poll='define'" >>$(@D)/uconfig.sh
-	echo "i_poll='define'" >>$(@D)/uconfig.sh
-	$(SED) 's/UNKNOWN-/Buildroot $(BR2_VERSION_FULL) /' $(@D)/patchlevel.h
-	$(SED) 's/local\///' $(@D)/uconfig.sh
-	$(MICROPERL_BIGENDIAN)
-	$(MICROPERL_LARGEFILE)
-	$(MICROPERL_WCHAR)
-	$(MAKE) -C $(@D) -f Makefile.micro regen_uconfig
-	cp -f $(@D)/uconfig.h $(@D)/config.h
-	cp -f $(@D)/uconfig.sh $(@D)/config.sh
-	echo "ccname='$(TARGET_CC)'" >>$(@D)/config.sh
-	echo "PERL_CONFIG_SH=true" >>$(@D)/config.sh
-	cd $(@D) ; $(HOST_DIR)/usr/bin/perl make_patchnum.pl ; \
-	$(HOST_DIR)/usr/bin/perl configpm
-endef
-
-define MICROPERL_BUILD_CMDS
-	$(MAKE) -f Makefile.micro -C $(@D) \
-		CC="$(HOSTCC)" bitcount.h
-	$(MAKE) -f Makefile.micro -C $(@D) \
-		CC="$(TARGET_CC)" OPTIMIZE="$(TARGET_CFLAGS)"
-endef
-
-# Some extensions don't need a build run
-# We try to build anyway to avoid a huge black list
-# Just ignore make_ext.pl warning/errors
-define MICROPERL_BUILD_EXTENSIONS
-	for i in $(MICROPERL_MODS); do \
-	cd $(@D); ln -sf $(HOST_DIR)/usr/bin/perl miniperl; \
-		PERL5LIB=$(TARGET_DIR)/$(MICROPERL_ARCH_DIR) \
-		$(HOST_DIR)/usr/bin/perl make_ext.pl MAKE="$(MAKE)" --nonxs \
-		`echo $$i|sed -e 's/.pm//'`; \
-	done
-endef
-
-define MICROPERL_INSTALL_TARGET_CMDS
-	$(INSTALL) -m 0755 -D $(@D)/microperl $(TARGET_DIR)/usr/bin/microperl
-	ln -sf microperl $(TARGET_DIR)/usr/bin/perl
-	for i in $(MICROPERL_ARCH_MODS); do \
-		$(INSTALL) -m 0644 -D $(@D)/lib/$$i \
-			$(TARGET_DIR)/$(MICROPERL_ARCH_DIR)/$$i; \
-	done
-	for i in $(MICROPERL_BASE_MODS); do \
-		$(INSTALL) -m 0644 -D $(@D)/lib/$$i \
-			$(TARGET_DIR)/$(MICROPERL_MODS_DIR)/$$i; \
-	done
-	$(MICROPERL_BUILD_EXTENSIONS)
-	for i in $(MICROPERL_MODS); do \
-		j=`echo $$i|cut -d : -f 1` ; \
-		if [ -d $(@D)/lib/$$j ] ; then \
-			cp -af $(@D)/lib/$$j $(TARGET_DIR)/$(MICROPERL_MODS_DIR) ; \
-		fi ; \
-		if [ -f $(@D)/lib/$$i ] ; then \
-			$(INSTALL) -m 0644 -D $(@D)/lib/$$i $(TARGET_DIR)/$(MICROPERL_MODS_DIR)/$$i; \
-		fi ; \
-	done
-	# Remove test files
-	find $(TARGET_DIR)/$(MICROPERL_MODS_DIR) -type f -name *.t \
-		-exec rm -f {} \;
-endef
-
-define MICROPERL_UNINSTALL_TARGET_CMDS
-	rm -f $(TARGET_DIR)/usr/bin/perl
-	rm -f $(TARGET_DIR)/usr/bin/microperl
-	rm -rf $(TARGET_DIR)/usr/lib/perl5
-endef
-
-$(eval $(generic-package))
-$(eval $(host-generic-package))
diff --git a/package/ntp/Config.in b/package/ntp/Config.in
index 434cd2d..ec5dbbb 100644
--- a/package/ntp/Config.in
+++ b/package/ntp/Config.in
@@ -20,7 +20,7 @@ config BR2_PACKAGE_NTP_NTP_KEYGEN
 
 config BR2_PACKAGE_NTP_NTP_WAIT
 	bool "ntp-wait"
-	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
+	depends on BR2_PACKAGE_PERL
 	help
 	  ntp-wait waits until the locally running ntpd is in state 4
 	  (synchronized). This could be useful at boot time, to delay the
@@ -59,7 +59,7 @@ config BR2_PACKAGE_NTP_NTPSNMPD
 
 config BR2_PACKAGE_NTP_NTPTRACE
 	bool "ntptrace"
-	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
+	depends on BR2_PACKAGE_PERL
 	help
 	  ntptrace is a perl script that uses the ntpq utility program to
 	  follow the chain of NTP servers from a given host back to the
diff --git a/package/samba/Config.in b/package/samba/Config.in
index ee3244f..92714d7 100644
--- a/package/samba/Config.in
+++ b/package/samba/Config.in
@@ -36,12 +36,12 @@ config BR2_PACKAGE_SAMBA_FINDSMB
 	default y
 	depends on BR2_PACKAGE_SAMBA_SMBCLIENT
 	depends on BR2_PACKAGE_SAMBA_NMBLOOKUP
-	depends on BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL
+	depends on BR2_PACKAGE_PERL
 	help
 	  Script to browse network
 
 comment "findsmb       - disabled (requires nmblookup, smbclient and perl)"
-	depends on !BR2_PACKAGE_SAMBA_SMBCLIENT || !BR2_PACKAGE_SAMBA_NMBLOOKUP || !(BR2_PACKAGE_MICROPERL || BR2_PACKAGE_PERL)
+	depends on !BR2_PACKAGE_SAMBA_SMBCLIENT || !BR2_PACKAGE_SAMBA_NMBLOOKUP || !BR2_PACKAGE_PERL
 
 config BR2_PACKAGE_SAMBA_NET
 	bool "net"
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 07/10] perl: relax microperl dependencies
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 07/10] perl: relax microperl dependencies Francois Perrad
@ 2012-10-12 16:37   ` Thomas Petazzoni
  0 siblings, 0 replies; 13+ messages in thread
From: Thomas Petazzoni @ 2012-10-12 16:37 UTC (permalink / raw)
  To: buildroot

Dear Francois Perrad,

On Wed, 10 Oct 2012 17:06:28 +0200, Francois Perrad wrote:
> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> ---
>  package/autoconf/Config.in   |    2 +-
>  package/autoconf/autoconf.mk |    7 ++++++-
>  package/automake/Config.in   |    2 +-
>  package/automake/automake.mk |    7 ++++++-
>  package/ntp/Config.in        |    4 ++--
>  package/samba/Config.in      |    4 ++--
>  6 files changed, 18 insertions(+), 8 deletions(-)

Instead of trying to support both microperl and perl in parallel, this
patch should just switch everybody to use BR2_PACKAGE_PERL instead,
since further patches in your series are removing microperl. So don't
bother introduce complexity here to remove it in a later patch. Just
move everybody to the full blown perl instead.

Thanks,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 08/10] microperl: mark as DEPRECATED
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 08/10] microperl: mark as DEPRECATED Francois Perrad
@ 2012-10-12 16:37   ` Thomas Petazzoni
  0 siblings, 0 replies; 13+ messages in thread
From: Thomas Petazzoni @ 2012-10-12 16:37 UTC (permalink / raw)
  To: buildroot

Dear Francois Perrad,

On Wed, 10 Oct 2012 17:06:29 +0200, Francois Perrad wrote:
> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> ---
>  package/microperl/Config.in |    1 +
>  1 file changed, 1 insertion(+)

Drop this one. You are removing microperl in PATCH 10/10, so it doesn't
make sense to have in the same series a patch that deprecates it.
Deprecating it would make sense if we intended to keep the microperl
package around for another release cycle or two, but if we intend to
remove it right now, then just do it.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 13+ messages in thread
* [Buildroot] [PATCH v10 10/10] microperl: remove it
  2012-10-10 15:06 ` [Buildroot] [PATCH v10 10/10] microperl: remove it Francois Perrad
@ 2012-10-12 16:39   ` Thomas Petazzoni
  0 siblings, 0 replies; 13+ messages in thread
From: Thomas Petazzoni @ 2012-10-12 16:39 UTC (permalink / raw)
  To: buildroot

Dear Francois Perrad,

On Wed, 10 Oct 2012 17:06:31 +0200, Francois Perrad wrote:
> replaced by perl
> use BR2_PACKAGE_PERL_CUSTOM_INSTALL if you want a small footprint
> 
> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> ---
>  package/Config.in                                  |    1 -
>  package/autoconf/Config.in                         |    2 +-
>  package/autoconf/autoconf.mk                       |    7 +-
>  package/automake/Config.in                         |    2 +-
>  package/automake/automake.mk                       |    7 +-
>  package/libxml-parser-perl/libxml-parser-perl.mk   |    6 -
>  package/microperl/Config.in                        |   30 ----
>  .../microperl/microperl-no-signal-handlers.patch   |   22 ---
>  package/microperl/microperl-uudmap.patch           |   47 ------
>  package/microperl/microperl.mk                     |  156 --------------------
>  package/ntp/Config.in                              |    4 +-
>  package/samba/Config.in                            |    4 +-
>  12 files changed, 8 insertions(+), 280 deletions(-)
>  delete mode 100644 package/microperl/Config.in
>  delete mode 100644 package/microperl/microperl-no-signal-handlers.patch
>  delete mode 100644 package/microperl/microperl-uudmap.patch
>  delete mode 100644 package/microperl/microperl.mk

If you change your PATCH 07/10 to switch everybody to just use the new
perl package, then this patch should just become a simple removal of
the microperl package: no other packages should be affected.

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 13+ messages in thread
end of thread, other threads:[~2012-10-12 16:39 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-10 15:06 [Buildroot] [PATCH v10 01/10] host-qemu: new package Francois Perrad
2012-10-10 15:06 ` [Buildroot] [PATCH v10 02/10] perl: " Francois Perrad
2012-10-10 15:06 ` [Buildroot] [PATCH v10 03/10] perl: add DB_File Francois Perrad
2012-10-10 15:06 ` [Buildroot] [PATCH v10 04/10] gdbm: new package Francois Perrad
2012-10-10 15:06 ` [Buildroot] [PATCH v10 05/10] perl: add GDBM_File Francois Perrad
2012-10-10 15:06 ` [Buildroot] [PATCH v10 06/10] perl: add option "custom install" Francois Perrad
2012-10-10 15:06 ` [Buildroot] [PATCH v10 07/10] perl: relax microperl dependencies Francois Perrad
2012-10-12 16:37   ` Thomas Petazzoni
2012-10-10 15:06 ` [Buildroot] [PATCH v10 08/10] microperl: mark as DEPRECATED Francois Perrad
2012-10-12 16:37   ` Thomas Petazzoni
2012-10-10 15:06 ` [Buildroot] [PATCH v10 09/10] cpanminus: new package Francois Perrad
2012-10-10 15:06 ` [Buildroot] [PATCH v10 10/10] microperl: remove it Francois Perrad
2012-10-12 16:39   ` Thomas Petazzoni

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.