[PATCH v2 0/3] make cadence ethernet drivers build on any architecture

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v2 0/3] make cadence ethernet drivers build on any architecture
@ 2012-10-21 21:57 ` Joachim Eastwood
  0 siblings, 0 replies; 8+ messages in thread
From: Joachim Eastwood @ 2012-10-21 21:57 UTC (permalink / raw)
  To: nicolas.ferre, davem, hskinnemoen, egtvedt, plagnioj, bgat
  Cc: netdev, linux-arm-kernel, Joachim Eastwood

This series makes the at91_ether and macb driver build-able on any architecture.

Patch 1 removes the HAVE_NET_MACB from the cadence Kconfig and this allow macb to be built on any architecture. The macb driver requires no other modifications.

Patch 3 moves a bootloader quirk for CSB337 from at91_ether into platform data as a flag. This allow us to remove the last mach include and build this driver on any architecture. It also make it easier to share the address setup between at91_ether and macb.

The next series will make the at91_ether driver use address setting and statistics from macb. There is also a clean up of print outs plus some comment/style fixes.

Joachim Eastwood (3):
  net/cadence: get rid of HAVE_NET_MACB
  net/at91_ether: select MACB in Kconfig
  net/at91_ether: add pdata flag for reverse Eth addr

 arch/arm/mach-at91/Kconfig                | 4 ----
 arch/arm/mach-at91/board-csb337.c         | 2 ++
 arch/avr32/Kconfig                        | 1 -
 drivers/net/ethernet/cadence/Kconfig      | 8 +-------
 drivers/net/ethernet/cadence/Makefile     | 2 +-
 drivers/net/ethernet/cadence/at91_ether.c | 5 ++---
 include/linux/platform_data/macb.h        | 1 +
 7 files changed, 7 insertions(+), 16 deletions(-)

-- 
1.7.12.4

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 0/3] make cadence ethernet drivers build on any architecture
@ 2012-10-21 21:57 ` Joachim Eastwood
  0 siblings, 0 replies; 8+ messages in thread
From: Joachim Eastwood @ 2012-10-21 21:57 UTC (permalink / raw)
  To: linux-arm-kernel

This series makes the at91_ether and macb driver build-able on any architecture.

Patch 1 removes the HAVE_NET_MACB from the cadence Kconfig and this allow macb to be built on any architecture. The macb driver requires no other modifications.

Patch 3 moves a bootloader quirk for CSB337 from at91_ether into platform data as a flag. This allow us to remove the last mach include and build this driver on any architecture. It also make it easier to share the address setup between at91_ether and macb.

The next series will make the at91_ether driver use address setting and statistics from macb. There is also a clean up of print outs plus some comment/style fixes.

Joachim Eastwood (3):
  net/cadence: get rid of HAVE_NET_MACB
  net/at91_ether: select MACB in Kconfig
  net/at91_ether: add pdata flag for reverse Eth addr

 arch/arm/mach-at91/Kconfig                | 4 ----
 arch/arm/mach-at91/board-csb337.c         | 2 ++
 arch/avr32/Kconfig                        | 1 -
 drivers/net/ethernet/cadence/Kconfig      | 8 +-------
 drivers/net/ethernet/cadence/Makefile     | 2 +-
 drivers/net/ethernet/cadence/at91_ether.c | 5 ++---
 include/linux/platform_data/macb.h        | 1 +
 7 files changed, 7 insertions(+), 16 deletions(-)

-- 
1.7.12.4

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/3] net/cadence: get rid of HAVE_NET_MACB
  2012-10-21 21:57 ` Joachim Eastwood
@ 2012-10-21 21:57   ` Joachim Eastwood
  -1 siblings, 0 replies; 8+ messages in thread
From: Joachim Eastwood @ 2012-10-21 21:57 UTC (permalink / raw)
  To: nicolas.ferre, davem, hskinnemoen, egtvedt, plagnioj, bgat
  Cc: netdev, linux-arm-kernel, Joachim Eastwood

macb is a platform driver and there is nothing that prevents
this driver from being built on non-ARM/AVR32 platforms.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 arch/arm/mach-at91/Kconfig           | 4 ----
 arch/avr32/Kconfig                   | 1 -
 drivers/net/ethernet/cadence/Kconfig | 5 -----
 3 files changed, 10 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index d846b6e..72020fb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -45,7 +45,6 @@ config SOC_AT91RM9200
 config SOC_AT91SAM9260
 	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
 	select HAVE_AT91_DBGU0
-	select HAVE_NET_MACB
 	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
@@ -63,7 +62,6 @@ config SOC_AT91SAM9263
 	bool "AT91SAM9263"
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
 	select SOC_AT91SAM9
 
 config SOC_AT91SAM9RL
@@ -76,7 +74,6 @@ config SOC_AT91SAM9G45
 	bool "AT91SAM9G45 or AT91SAM9M10 families"
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
 	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
@@ -86,7 +83,6 @@ config SOC_AT91SAM9X5
 	bool "AT91SAM9x5 family"
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
 	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 06e73bf..09f9fa8 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -80,7 +80,6 @@ config PLATFORM_AT32AP
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
 	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
 
 #
 # CPU types
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 57f78abe..5d1ea30 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -2,13 +2,9 @@
 # Atmel device configuration
 #
 
-config HAVE_NET_MACB
-	bool
-
 config NET_CADENCE
 	bool "Cadence devices"
 	default y
-	depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
@@ -34,7 +30,6 @@ config ARM_AT91_ETHER
 
 config MACB
 	tristate "Cadence MACB/GEM support"
-	depends on HAVE_NET_MACB
 	select PHYLIB
 	---help---
 	  The Cadence MACB ethernet interface is found on many Atmel AT32 and
-- 
1.7.12.4

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 1/3] net/cadence: get rid of HAVE_NET_MACB
@ 2012-10-21 21:57   ` Joachim Eastwood
  0 siblings, 0 replies; 8+ messages in thread
From: Joachim Eastwood @ 2012-10-21 21:57 UTC (permalink / raw)
  To: linux-arm-kernel

macb is a platform driver and there is nothing that prevents
this driver from being built on non-ARM/AVR32 platforms.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 arch/arm/mach-at91/Kconfig           | 4 ----
 arch/avr32/Kconfig                   | 1 -
 drivers/net/ethernet/cadence/Kconfig | 5 -----
 3 files changed, 10 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index d846b6e..72020fb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -45,7 +45,6 @@ config SOC_AT91RM9200
 config SOC_AT91SAM9260
 	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
 	select HAVE_AT91_DBGU0
-	select HAVE_NET_MACB
 	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
@@ -63,7 +62,6 @@ config SOC_AT91SAM9263
 	bool "AT91SAM9263"
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
 	select SOC_AT91SAM9
 
 config SOC_AT91SAM9RL
@@ -76,7 +74,6 @@ config SOC_AT91SAM9G45
 	bool "AT91SAM9G45 or AT91SAM9M10 families"
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
 	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
@@ -86,7 +83,6 @@ config SOC_AT91SAM9X5
 	bool "AT91SAM9x5 family"
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
 	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 06e73bf..09f9fa8 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -80,7 +80,6 @@ config PLATFORM_AT32AP
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
 	select HAVE_FB_ATMEL
-	select HAVE_NET_MACB
 
 #
 # CPU types
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 57f78abe..5d1ea30 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -2,13 +2,9 @@
 # Atmel device configuration
 #
 
-config HAVE_NET_MACB
-	bool
-
 config NET_CADENCE
 	bool "Cadence devices"
 	default y
-	depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 	  Make sure you know the name of your card. Read the Ethernet-HOWTO,
@@ -34,7 +30,6 @@ config ARM_AT91_ETHER
 
 config MACB
 	tristate "Cadence MACB/GEM support"
-	depends on HAVE_NET_MACB
 	select PHYLIB
 	---help---
 	  The Cadence MACB ethernet interface is found on many Atmel AT32 and
-- 
1.7.12.4

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 2/3] net/at91_ether: select MACB in Kconfig
  2012-10-21 21:57 ` Joachim Eastwood
@ 2012-10-21 21:57   ` Joachim Eastwood
  -1 siblings, 0 replies; 8+ messages in thread
From: Joachim Eastwood @ 2012-10-21 21:57 UTC (permalink / raw)
  To: nicolas.ferre, davem, hskinnemoen, egtvedt, plagnioj, bgat
  Cc: netdev, linux-arm-kernel, Joachim Eastwood

Now that HAVE_NET_MACB is gone let's just select MACB to
satisfy the dependecies in at91_ether.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 drivers/net/ethernet/cadence/Kconfig  | 2 +-
 drivers/net/ethernet/cadence/Makefile | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 5d1ea30..f6d0956 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -23,7 +23,7 @@ config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
 	depends on ARM && ARCH_AT91RM9200
 	select NET_CORE
-	select PHYLIB
+	select MACB
 	---help---
 	  If you wish to compile a kernel for the AT91RM9200 and enable
 	  ethernet support, then you should always answer Y to this.
diff --git a/drivers/net/ethernet/cadence/Makefile b/drivers/net/ethernet/cadence/Makefile
index 798b1e0..9068b83 100644
--- a/drivers/net/ethernet/cadence/Makefile
+++ b/drivers/net/ethernet/cadence/Makefile
@@ -2,5 +2,5 @@
 # Makefile for the Atmel network device drivers.
 #
 
-obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o macb.o
+obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
 obj-$(CONFIG_MACB) += macb.o
-- 
1.7.12.4

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 2/3] net/at91_ether: select MACB in Kconfig
@ 2012-10-21 21:57   ` Joachim Eastwood
  0 siblings, 0 replies; 8+ messages in thread
From: Joachim Eastwood @ 2012-10-21 21:57 UTC (permalink / raw)
  To: linux-arm-kernel

Now that HAVE_NET_MACB is gone let's just select MACB to
satisfy the dependecies in at91_ether.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 drivers/net/ethernet/cadence/Kconfig  | 2 +-
 drivers/net/ethernet/cadence/Makefile | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 5d1ea30..f6d0956 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -23,7 +23,7 @@ config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
 	depends on ARM && ARCH_AT91RM9200
 	select NET_CORE
-	select PHYLIB
+	select MACB
 	---help---
 	  If you wish to compile a kernel for the AT91RM9200 and enable
 	  ethernet support, then you should always answer Y to this.
diff --git a/drivers/net/ethernet/cadence/Makefile b/drivers/net/ethernet/cadence/Makefile
index 798b1e0..9068b83 100644
--- a/drivers/net/ethernet/cadence/Makefile
+++ b/drivers/net/ethernet/cadence/Makefile
@@ -2,5 +2,5 @@
 # Makefile for the Atmel network device drivers.
 #
 
-obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o macb.o
+obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
 obj-$(CONFIG_MACB) += macb.o
-- 
1.7.12.4

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 3/3] net/at91_ether: add pdata flag for reverse Eth addr
  2012-10-21 21:57 ` Joachim Eastwood
@ 2012-10-21 21:57   ` Joachim Eastwood
  -1 siblings, 0 replies; 8+ messages in thread
From: Joachim Eastwood @ 2012-10-21 21:57 UTC (permalink / raw)
  To: nicolas.ferre, davem, hskinnemoen, egtvedt, plagnioj, bgat
  Cc: netdev, linux-arm-kernel, Joachim Eastwood

This will allow us to remove the last mach include from at91_ether
and also make it easier to share address setup with macb.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 arch/arm/mach-at91/board-csb337.c         | 2 ++
 drivers/net/ethernet/cadence/Kconfig      | 1 -
 drivers/net/ethernet/cadence/at91_ether.c | 5 ++---
 include/linux/platform_data/macb.h        | 1 +
 4 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 3e37437..aa9b320 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -53,6 +53,8 @@ static void __init csb337_init_early(void)
 static struct macb_platform_data __initdata csb337_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC2,
 	.is_rmii	= 0,
+	/* The CSB337 bootloader stores the MAC the wrong-way around */
+	.rev_eth_addr	= 1,
 };
 
 static struct at91_usbh_data __initdata csb337_usbh_data = {
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index f6d0956..40172d1 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -21,7 +21,6 @@ if NET_CADENCE
 
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
-	depends on ARM && ARCH_AT91RM9200
 	select NET_CORE
 	select MACB
 	---help---
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 375d272..b92815a 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -32,8 +32,6 @@
 #include <linux/phy.h>
 #include <linux/io.h>
 
-#include <asm/mach-types.h>
-
 #include "macb.h"
 
 #define DRV_NAME	"at91_ether"
@@ -61,9 +59,10 @@
 
 static short __init unpack_mac_address(struct net_device *dev, unsigned int hi, unsigned int lo)
 {
+	struct macb *lp = netdev_priv(dev);
 	char addr[6];
 
-	if (machine_is_csb337()) {
+	if (lp->board_data.rev_eth_addr) {
 		addr[5] = (lo & 0xff);			/* The CSB337 bootloader stores the MAC the wrong-way around */
 		addr[4] = (lo & 0xff00) >> 8;
 		addr[3] = (lo & 0xff0000) >> 16;
diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
index b081c72..044a124 100644
--- a/include/linux/platform_data/macb.h
+++ b/include/linux/platform_data/macb.h
@@ -12,6 +12,7 @@ struct macb_platform_data {
 	u32		phy_mask;
 	int		phy_irq_pin;	/* PHY IRQ */
 	u8		is_rmii;	/* using RMII interface? */
+	u8		rev_eth_addr;	/* reverse Ethernet address byte order */
 };
 
 #endif /* __MACB_PDATA_H__ */
-- 
1.7.12.4

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 3/3] net/at91_ether: add pdata flag for reverse Eth addr
@ 2012-10-21 21:57   ` Joachim Eastwood
  0 siblings, 0 replies; 8+ messages in thread
From: Joachim Eastwood @ 2012-10-21 21:57 UTC (permalink / raw)
  To: linux-arm-kernel

This will allow us to remove the last mach include from at91_ether
and also make it easier to share address setup with macb.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
---
 arch/arm/mach-at91/board-csb337.c         | 2 ++
 drivers/net/ethernet/cadence/Kconfig      | 1 -
 drivers/net/ethernet/cadence/at91_ether.c | 5 ++---
 include/linux/platform_data/macb.h        | 1 +
 4 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 3e37437..aa9b320 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -53,6 +53,8 @@ static void __init csb337_init_early(void)
 static struct macb_platform_data __initdata csb337_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC2,
 	.is_rmii	= 0,
+	/* The CSB337 bootloader stores the MAC the wrong-way around */
+	.rev_eth_addr	= 1,
 };
 
 static struct at91_usbh_data __initdata csb337_usbh_data = {
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index f6d0956..40172d1 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -21,7 +21,6 @@ if NET_CADENCE
 
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
-	depends on ARM && ARCH_AT91RM9200
 	select NET_CORE
 	select MACB
 	---help---
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 375d272..b92815a 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -32,8 +32,6 @@
 #include <linux/phy.h>
 #include <linux/io.h>
 
-#include <asm/mach-types.h>
-
 #include "macb.h"
 
 #define DRV_NAME	"at91_ether"
@@ -61,9 +59,10 @@
 
 static short __init unpack_mac_address(struct net_device *dev, unsigned int hi, unsigned int lo)
 {
+	struct macb *lp = netdev_priv(dev);
 	char addr[6];
 
-	if (machine_is_csb337()) {
+	if (lp->board_data.rev_eth_addr) {
 		addr[5] = (lo & 0xff);			/* The CSB337 bootloader stores the MAC the wrong-way around */
 		addr[4] = (lo & 0xff00) >> 8;
 		addr[3] = (lo & 0xff0000) >> 16;
diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
index b081c72..044a124 100644
--- a/include/linux/platform_data/macb.h
+++ b/include/linux/platform_data/macb.h
@@ -12,6 +12,7 @@ struct macb_platform_data {
 	u32		phy_mask;
 	int		phy_irq_pin;	/* PHY IRQ */
 	u8		is_rmii;	/* using RMII interface? */
+	u8		rev_eth_addr;	/* reverse Ethernet address byte order */
 };
 
 #endif /* __MACB_PDATA_H__ */
-- 
1.7.12.4

^ permalink raw reply related	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2012-10-21 21:57 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-21 21:57 [PATCH v2 0/3] make cadence ethernet drivers build on any architecture Joachim Eastwood
2012-10-21 21:57 ` Joachim Eastwood
2012-10-21 21:57 ` [PATCH v2 1/3] net/cadence: get rid of HAVE_NET_MACB Joachim Eastwood
2012-10-21 21:57   ` Joachim Eastwood
2012-10-21 21:57 ` [PATCH v2 2/3] net/at91_ether: select MACB in Kconfig Joachim Eastwood
2012-10-21 21:57   ` Joachim Eastwood
2012-10-21 21:57 ` [PATCH v2 3/3] net/at91_ether: add pdata flag for reverse Eth addr Joachim Eastwood
2012-10-21 21:57   ` Joachim Eastwood

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.