From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: archit@ti.com, linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org
Cc: rob@ti.com, Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 00/12] OMAPDSS: use DSI PLL clk for DPI
Date: Tue, 30 Oct 2012 16:09:57 +0000 [thread overview]
Message-ID: <1351613409-21186-1-git-send-email-tomi.valkeinen@ti.com> (raw)
Hi,
The aim of this series is to enable using DSI PLL as the pixel clock source for
DPI output. There are the following main parts:
* first 4 patches are slightly related generic improvements/fixes
* fix DSI PLL problem related to non-50% duty cycle
* fix DSI PLL problem related to powering
* changes to the clock handling to always use DSI PLL for DPI when possible
I've tested the series on OMAP4 Panda, OMAP4 SDP and OMAP3 Beagle.
Tomi
Tomi Valkeinen (12):
OMAPFB: remove use of extended edid block
OMAPFB: improve mode selection from EDID
OMAPDSS: fix DPI & DSI init order
OMAPDSS: fix DSI2 PLL clk names
OMAPDSS: DSI: skip odd dividers when pck >= 100MHz
OMAPDSS: DSI: workaround for HSDiv problem
OMAPDSS: add dss_calc_clock_rates() back
OMAPDSS: setup default dss fck
OMAPDSS: hide dss_select_dispc_clk_source()
OMAPDSS: DPI: use dpi.dsidev to see whether to use dsi pll
OMAPDSS: DPI: verify if DSI PLL is operational
OMAPDSS: DPI: always use DSI PLL if available
drivers/video/omap2/dss/core.c | 12 ++--
drivers/video/omap2/dss/dpi.c | 99 +++++++++++++++++++++---------
drivers/video/omap2/dss/dsi.c | 14 ++++-
drivers/video/omap2/dss/dss.c | 67 +++++++++++++++++++-
drivers/video/omap2/dss/dss.h | 2 +-
drivers/video/omap2/dss/hdmi.c | 8 ---
drivers/video/omap2/omapfb/omapfb-main.c | 16 ++---
7 files changed, 160 insertions(+), 58 deletions(-)
--
1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
To: archit@ti.com, linux-omap@vger.kernel.org, linux-fbdev@vger.kernel.org
Cc: rob@ti.com, Tomi Valkeinen <tomi.valkeinen@ti.com>
Subject: [PATCH 00/12] OMAPDSS: use DSI PLL clk for DPI
Date: Tue, 30 Oct 2012 18:09:57 +0200 [thread overview]
Message-ID: <1351613409-21186-1-git-send-email-tomi.valkeinen@ti.com> (raw)
Hi,
The aim of this series is to enable using DSI PLL as the pixel clock source for
DPI output. There are the following main parts:
* first 4 patches are slightly related generic improvements/fixes
* fix DSI PLL problem related to non-50% duty cycle
* fix DSI PLL problem related to powering
* changes to the clock handling to always use DSI PLL for DPI when possible
I've tested the series on OMAP4 Panda, OMAP4 SDP and OMAP3 Beagle.
Tomi
Tomi Valkeinen (12):
OMAPFB: remove use of extended edid block
OMAPFB: improve mode selection from EDID
OMAPDSS: fix DPI & DSI init order
OMAPDSS: fix DSI2 PLL clk names
OMAPDSS: DSI: skip odd dividers when pck >= 100MHz
OMAPDSS: DSI: workaround for HSDiv problem
OMAPDSS: add dss_calc_clock_rates() back
OMAPDSS: setup default dss fck
OMAPDSS: hide dss_select_dispc_clk_source()
OMAPDSS: DPI: use dpi.dsidev to see whether to use dsi pll
OMAPDSS: DPI: verify if DSI PLL is operational
OMAPDSS: DPI: always use DSI PLL if available
drivers/video/omap2/dss/core.c | 12 ++--
drivers/video/omap2/dss/dpi.c | 99 +++++++++++++++++++++---------
drivers/video/omap2/dss/dsi.c | 14 ++++-
drivers/video/omap2/dss/dss.c | 67 +++++++++++++++++++-
drivers/video/omap2/dss/dss.h | 2 +-
drivers/video/omap2/dss/hdmi.c | 8 ---
drivers/video/omap2/omapfb/omapfb-main.c | 16 ++---
7 files changed, 160 insertions(+), 58 deletions(-)
--
1.7.10.4
next reply other threads:[~2012-10-30 16:09 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-30 16:09 Tomi Valkeinen [this message]
2012-10-30 16:09 ` [PATCH 00/12] OMAPDSS: use DSI PLL clk for DPI Tomi Valkeinen
2012-10-30 16:09 ` [PATCH 01/12] OMAPFB: remove use of extended edid block Tomi Valkeinen
2012-10-30 16:09 ` Tomi Valkeinen
2012-10-31 6:10 ` Archit Taneja
2012-10-31 6:22 ` Archit Taneja
2012-10-31 6:23 ` Tomi Valkeinen
2012-10-31 6:23 ` Tomi Valkeinen
2012-10-30 16:09 ` [PATCH 02/12] OMAPFB: improve mode selection from EDID Tomi Valkeinen
2012-10-30 16:09 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 03/12] OMAPDSS: fix DPI & DSI init order Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 04/12] OMAPDSS: fix DSI2 PLL clk names Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 05/12] OMAPDSS: DSI: skip odd dividers when pck >= 100MHz Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-31 6:45 ` Archit Taneja
2012-10-31 6:57 ` Archit Taneja
2012-10-31 7:26 ` Tomi Valkeinen
2012-10-31 7:26 ` Tomi Valkeinen
2012-10-31 7:32 ` Archit Taneja
2012-10-31 7:44 ` Archit Taneja
2012-10-30 16:10 ` [PATCH 06/12] OMAPDSS: DSI: workaround for HSDiv problem Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 07/12] OMAPDSS: add dss_calc_clock_rates() back Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 08/12] OMAPDSS: setup default dss fck Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-31 6:31 ` Archit Taneja
2012-10-31 6:43 ` Archit Taneja
2012-10-31 7:32 ` Tomi Valkeinen
2012-10-31 7:32 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 09/12] OMAPDSS: hide dss_select_dispc_clk_source() Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-31 6:54 ` Archit Taneja
2012-10-31 6:54 ` Archit Taneja
2012-10-31 7:17 ` Tomi Valkeinen
2012-10-31 7:17 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 10/12] OMAPDSS: DPI: use dpi.dsidev to see whether to use dsi pll Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 11/12] OMAPDSS: DPI: verify if DSI PLL is operational Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-30 16:10 ` [PATCH 12/12] OMAPDSS: DPI: always use DSI PLL if available Tomi Valkeinen
2012-10-30 16:10 ` Tomi Valkeinen
2012-10-31 7:26 ` Archit Taneja
2012-10-31 7:38 ` Archit Taneja
2012-11-02 10:08 ` Tomi Valkeinen
2012-11-02 10:08 ` Tomi Valkeinen
2012-11-02 10:44 ` Archit Taneja
2012-11-02 10:56 ` Archit Taneja
2012-11-02 10:49 ` Tomi Valkeinen
2012-11-02 10:49 ` Tomi Valkeinen
2012-11-02 11:09 ` Archit Taneja
2012-11-02 11:21 ` Archit Taneja
2012-11-02 11:28 ` Tomi Valkeinen
2012-11-02 11:28 ` Tomi Valkeinen
2012-11-02 11:56 ` Archit Taneja
2012-11-02 11:56 ` Archit Taneja
2012-11-05 8:55 ` Tomi Valkeinen
2012-11-05 8:55 ` Tomi Valkeinen
2012-11-05 14:21 ` Rob Clark
2012-11-05 14:21 ` Rob Clark
2012-11-06 13:41 ` Tomi Valkeinen
2012-11-06 13:41 ` Tomi Valkeinen
2012-11-06 14:40 ` Rob Clark
2012-11-06 14:40 ` Rob Clark
2012-11-07 10:01 ` Tomi Valkeinen
2012-11-07 10:01 ` Tomi Valkeinen
2012-11-07 14:32 ` Rob Clark
2012-11-07 14:32 ` Rob Clark
2012-11-07 15:13 ` Tomi Valkeinen
2012-11-07 15:13 ` Tomi Valkeinen
2012-11-07 19:18 ` Rob Clark
2012-11-07 19:18 ` Rob Clark
2012-11-08 7:39 ` Tomi Valkeinen
2012-11-08 7:39 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351613409-21186-1-git-send-email-tomi.valkeinen@ti.com \
--to=tomi.valkeinen@ti.com \
--cc=archit@ti.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rob@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.