From: Thomas Abraham <thomas.abraham@linaro.org> To: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org, mturquette@ti.com, mturquette@linaro.org, kgene.kim@samsung.com, t.figa@samsung.com, sylvester.nawrocki@gmail.com, Thomas Abraham <thomas.abraham@linaro.org> Subject: [PATCH v3 06/11] ARM: dts: add xxti and xusbxti fixed rate clock nodes for exynos4 based platforms Date: Thu, 15 Nov 2012 03:37:28 +0530 [thread overview] Message-ID: <1352930853-12268-7-git-send-email-thomas.abraham@linaro.org> (raw) In-Reply-To: <1352930853-12268-1-git-send-email-thomas.abraham@linaro.org> The clock frequency of xxti and xusbxti clocks is dependent on the frequency of the on-board oscillator that is used to generate these clocks. So allow the frequency of these clocks to be specfied from device tree. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- arch/arm/boot/dts/exynos4210-origen.dts | 12 ++++++++++++ arch/arm/boot/dts/exynos4210-smdkv310.dts | 12 ++++++++++++ arch/arm/boot/dts/exynos4412-smdk4412.dts | 12 ++++++++++++ 3 files changed, 36 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index f16c99f..de59733 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -121,4 +121,16 @@ linux,default-trigger = "heartbeat"; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 9b23a82..9a379eb 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -189,4 +189,16 @@ }; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <12000000>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index f05bf57..8f422fc 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -42,4 +42,16 @@ serial@13830000 { status = "okay"; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; }; -- 1.7.4.4
WARNING: multiple messages have this Message-ID (diff)
From: thomas.abraham@linaro.org (Thomas Abraham) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 06/11] ARM: dts: add xxti and xusbxti fixed rate clock nodes for exynos4 based platforms Date: Thu, 15 Nov 2012 03:37:28 +0530 [thread overview] Message-ID: <1352930853-12268-7-git-send-email-thomas.abraham@linaro.org> (raw) In-Reply-To: <1352930853-12268-1-git-send-email-thomas.abraham@linaro.org> The clock frequency of xxti and xusbxti clocks is dependent on the frequency of the on-board oscillator that is used to generate these clocks. So allow the frequency of these clocks to be specfied from device tree. Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- arch/arm/boot/dts/exynos4210-origen.dts | 12 ++++++++++++ arch/arm/boot/dts/exynos4210-smdkv310.dts | 12 ++++++++++++ arch/arm/boot/dts/exynos4412-smdk4412.dts | 12 ++++++++++++ 3 files changed, 36 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index f16c99f..de59733 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -121,4 +121,16 @@ linux,default-trigger = "heartbeat"; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 9b23a82..9a379eb 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -189,4 +189,16 @@ }; }; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <12000000>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index f05bf57..8f422fc 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -42,4 +42,16 @@ serial at 13830000 { status = "okay"; }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti", "fixed-clock"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; }; -- 1.7.4.4
next prev parent reply other threads:[~2012-11-14 22:07 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-11-14 22:07 [PATCH v3 00/11] clk: exynos4: migrate to common clock framework Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 22:07 ` [PATCH v3 01/11] clk: samsung: add common clock framework helper functions for Samsung platforms Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 23:12 ` Tomasz Figa 2012-11-14 23:12 ` Tomasz Figa 2012-11-15 8:33 ` Thomas Abraham 2012-11-15 8:33 ` Thomas Abraham 2012-11-15 10:25 ` Tomasz Figa 2012-11-15 10:25 ` Tomasz Figa 2012-11-14 22:07 ` [PATCH v3 02/11] clk: samsung: add pll clock registration helper functions Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 22:07 ` [PATCH v3 03/11] clk: exynos4: register clocks using common clock framework Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 23:24 ` Tomasz Figa 2012-11-14 23:24 ` Tomasz Figa 2012-11-15 8:38 ` Thomas Abraham 2012-11-15 8:38 ` Thomas Abraham 2012-11-14 22:07 ` [PATCH v3 04/11] ARM: Exynos4: Migrate clock support to " Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 23:31 ` Tomasz Figa 2012-11-14 23:31 ` Tomasz Figa 2012-11-15 9:13 ` Thomas Abraham 2012-11-15 9:13 ` Thomas Abraham 2012-11-15 10:42 ` Tomasz Figa 2012-11-15 10:42 ` Tomasz Figa 2012-11-14 22:07 ` [PATCH v3 05/11] ARM: dts: add exynos4 clock controller nodes Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 23:27 ` Tomasz Figa 2012-11-14 23:27 ` Tomasz Figa 2012-11-15 8:58 ` Thomas Abraham 2012-11-15 8:58 ` Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham [this message] 2012-11-14 22:07 ` [PATCH v3 06/11] ARM: dts: add xxti and xusbxti fixed rate clock nodes for exynos4 based platforms Thomas Abraham 2012-11-14 22:07 ` [PATCH v3 07/11] ARM: Exynos4: allow legacy board support to specify xxti and xusbxti clock speed Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 23:36 ` Tomasz Figa 2012-11-14 23:36 ` Tomasz Figa 2012-11-15 9:27 ` Thomas Abraham 2012-11-15 9:27 ` Thomas Abraham 2012-11-14 22:07 ` [PATCH v3 08/11] ARM: dts: add clock provider information for all controllers in Exynos4 SoC Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 22:07 ` [PATCH v3 09/11] ARM: Exynos4: remove auxdata table from machine file Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 22:07 ` [PATCH v3 10/11] ARM: Exynos: use fin_pll clock as the tick clock source for mct Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham 2012-11-14 22:07 ` [PATCH v3 11/11] ARM: Exynos: add support for mct clock setup Thomas Abraham 2012-11-14 22:07 ` Thomas Abraham
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1352930853-12268-7-git-send-email-thomas.abraham@linaro.org \ --to=thomas.abraham@linaro.org \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=kgene.kim@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=mturquette@ti.com \ --cc=sylvester.nawrocki@gmail.com \ --cc=t.figa@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.