Modules list

Modules list

[Leslie Rhorer]

	I sent a subscription to the linux-modules list which seemed to be 
successful, but when I sent a message, it bounced.  I sent the message 
to linux-modules@vger.kernel.org.  Did I do something wrong?

Re: Modules list

[Christophe Leroy]

Hi,

Le 29/05/2022 à 13:35, Leslie Rhorer a écrit :
>         I sent a subscription to the linux-modules list which seemed to be
> successful, but when I sent a message, it bounced.  I sent the message
> to linux-modules@vger.kernel.org.  Did I do something wrong?

Obviously you did it right as I got your message through the modules 
list (I'm not subscribed to linux-kernel list).

Christophe

Re: Modules list

[Randy Dunlap]

On 5/29/22 08:21, Christophe Leroy wrote:
> Hi,
> 
> Le 29/05/2022 à 13:35, Leslie Rhorer a écrit :
>>         I sent a subscription to the linux-modules list which seemed to be
>> successful, but when I sent a message, it bounced.  I sent the message
>> to linux-modules@vger.kernel.org.  Did I do something wrong?
> 
> Obviously you did it right as I got your message through the modules 
> list (I'm not subscribed to linux-kernel list).
> 
> Christophe

and you can see it in the lore archives:

https://lore.kernel.org/linux-modules/7999b7b4-3b58-a9c4-4756-445e54404f0f@csgroup.eu/T/#t

-- 
~Randy

Re: Modules list

[Leslie Rhorer]

	OK, well the message, as I said, was bounced.  It's rather urgent.  Is 
there a limit on the size of the message?  Even though I removed much of 
the content, the message was still rather large, since it contained a 
filtered output of dmesg.  I will try splitting t up.  Can attachments 
be made in the list?  Zipping the contents of the dmesg output will cut 
the size greatly.  I will also try zipping the dmesg text.

On 5/29/2022 10:41 AM, Randy Dunlap wrote:
> 
> 
> On 5/29/22 08:21, Christophe Leroy wrote:
>> Hi,
>>
>> Le 29/05/2022 à 13:35, Leslie Rhorer a écrit :
>>>          I sent a subscription to the linux-modules list which seemed to be
>>> successful, but when I sent a message, it bounced.  I sent the message
>>> to linux-modules@vger.kernel.org.  Did I do something wrong?
>>
>> Obviously you did it right as I got your message through the modules
>> list (I'm not subscribed to linux-kernel list).
>>
>> Christophe
> 
> and you can see it in the lore archives:
> 
> https://lore.kernel.org/linux-modules/7999b7b4-3b58-a9c4-4756-445e54404f0f@csgroup.eu/T/#t
> 

Module failure on new install of Debian Bullseye

[Leslie Rhorer]

     If this is the wrong list, please let me know the correct one so I 
can subscribe and post there.

     Two of my servers are having bizarre problems after upgrading to 
Debian Bullseye.  After attempting numerous fixes, I decided to wipe the 
systems and do a fresh install.  I did a fresh install of he first from 
a netinst thumb drive, but the .iso does not contain the bnx2c drivers 
needed for the ASUS PEB-10G/57811-1S 10GbE SFP+ Network Adapters used by 
both systems.  I tried adding what I thought to be the correct non-free 
drivers, but I still got errors about the bnx2x drivers and the 
interface shows no carrier.  Since no carrier is detected on the 
interface, no LAN or internet access is possible.  The system is 
effectively dead, although it boots up and of course I have local 
console access.

     After several different approaches, I changed from the netinst 
image to a full non-free image.  It still would not properly load the 
bnx2x drivers.  I tried downloading all six bnx2x e1, e1h, and e2 
release 7.13.15.0 and 7.13.21.0 firmware files and adding them to the 
initram image.  It no longer complains about missing files, but it 
doesn't activate the NIC, either.  These servers are both essentially 
dead in the water until I can get this fixed.

     The only thing I spot from dmesg that seems possibly related is:

[    1.420748] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have 
ASPM control
[    1.433467] r8169 0000:0b:00.0 eth0: RTL8168f/8111f, 
50:46:5d:65:15:9c, XID 480, IRQ 39
[    1.433469] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9194 
bytes, tx checksumming: ko]
...
[    1.458361] r8169 0000:0b:00.0 enp11s0: renamed from eth0
[    1.465675] bnx2x: disagrees about version of symbol module_layout
...
[   12.976323] r8169 0000:0b:00.0: firmware: failed to load 
rtl_nic/rtl8168f-1.fw (-2)
[   12.976478] firmware_class: See https://wiki.debian.org/Firmware for 
information about missing firmware
[   12.976632] r8169 0000:0b:00.0: Direct firmware load for 
rtl_nic/rtl8168f-1.fw failed with error -2
[   12.976636] r8169 0000:0b:00.0: Unable to load firmware 
rtl_nic/rtl8168f-1.fw (-2)
[   12.977326] RTL8211E Gigabit Ethernet r8169-0-b00:00: attached PHY 
driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-b00:00, 
irq=IGNORE)
[   13.046445] r8169 0000:0b:00.0 enp11s0: Link is Down

     I would not expect the RTL8168 or RTL8169 firmware to be necessary, 
but is it?  Either way, why isn't it on the image?  I would ask the same 
thing about the bnx2x drivers, but they seem to have a bit of a history 
of being fragmented.  All that aside, how can I get this fixed in a hurry?

     This is an AMD system with an 8 core FX-8350 CPU.  The install 
image is Debian GNU/Linux 11.3.0 "Bullseye" - Unofficial amd64 DVD 
Binary-1 with firmware 20220326-11:23.  I pulled the extra firmware from

git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/bnx2x/

Re: Module failure on new install of Debian Bullseye

[Leslie Rhorer]

     Below is the output of dmesg after removing quite a few of what I 
am certain are unrelated lines:

[    0.000000] Linux version 5.10.0-13-amd64 
(debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 
20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 
5.10.106-1 (2022-03-17)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.0-13-amd64 
root=UUID=944a307b-8423-4092-8d5c-fa5d0f3b646a ro quiet
[    0.000000] random: get_random_u32 called from 
bsp_init_amd+0x284/0x2c0 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating 
point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 
bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba788fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba789000-0x00000000bafd3fff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbd46000-0x00000000bc89ffff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000bc8a0000-0x00000000bca11fff] 
type 20
[    0.000000] BIOS-e820: [mem 0x00000000bca12000-0x00000000bca12fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bcc16000-0x00000000bd042fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd043000-0x00000000bd7f3fff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] 
reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] 
reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000013effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.10 by American Megatrends
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by 
O.E.M./SABERTOOTH 990FX R2.0, BIOS 0803 08/15/2012
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3511.666 MHz processor
[    0.001043] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001046] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.007258] AGP: No AGP bridge found
[    0.007315] last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[    0.007319] MTRR default type: uncachable
[    0.007320] MTRR fixed ranges enabled:
[    0.007321]   00000-9FFFF write-back
[    0.007322]   A0000-BFFFF write-through
[    0.007323]   C0000-CFFFF write-protect
[    0.007324]   D0000-DFFFF uncachable
[    0.007325]   E0000-FFFFF write-protect
[    0.007325] MTRR variable ranges enabled:
[    0.007327]   0 base 000000000000 mask FFFF80000000 write-back
[    0.007328]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.007330]   2 base 0000BD800000 mask FFFFFF800000 uncachable
[    0.007331]   3 base 0000BE000000 mask FFFFFE000000 uncachable
[    0.007331]   4 disabled
[    0.007332]   5 disabled
[    0.007333]   6 disabled
[    0.007333]   7 disabled
[    0.007334] TOM2: 000000013f000000 aka 5104M
[    0.008223] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.008337] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
[    0.008343] last_pfn = 0xbd800 max_arch_pfn = 0x400000000
[    0.013004] e820: update [mem 0xae852000-0xae854fff] usable ==> reserved
[    0.013019] Using GB pages for direct mapping
[    0.013683] RAMDISK: [mem 0x3296f000-0x354aefff]
[    0.013799] No NUMA configuration found
[    0.013800] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[    0.014154] Zone ranges:
[    0.014155]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.014156]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.014158]   Normal   [mem 0x0000000100000000-0x000000013effffff]
[    0.014159]   Device   empty
[    0.014160] Movable zone start for each node
[    0.014163] Early memory node ranges
[    0.014164]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.014165]   node   0: [mem 0x0000000000100000-0x00000000ba788fff]
[    0.014166]   node   0: [mem 0x00000000bca12000-0x00000000bca12fff]
[    0.014167]   node   0: [mem 0x00000000bcc16000-0x00000000bd042fff]
[    0.014168]   node   0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
[    0.014169]   node   0: [mem 0x0000000100001000-0x000000013effffff]
[    0.014170] Initmem setup node 0 [mem 
0x0000000000001000-0x000000013effffff]
[    0.014172] On node 0 totalpages: 1022817
[    0.014173]   DMA zone: 64 pages used for memmap
[    0.014174]   DMA zone: 26 pages reserved
[    0.014175]   DMA zone: 3999 pages, LIFO batch:0
[    0.014176]   DMA32 zone: 11888 pages used for memmap
[    0.014177]   DMA32 zone: 760771 pages, LIFO batch:63
[    0.014178]   Normal zone: 4032 pages used for memmap
[    0.014179]   Normal zone: 258047 pages, LIFO batch:63
[    0.014182] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.014219] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.022647] On node 0, zone DMA32: 8841 pages in unavailable ranges
[    0.022668] On node 0, zone DMA32: 515 pages in unavailable ranges
[    0.022697] On node 0, zone DMA32: 1969 pages in unavailable ranges
[    0.023601] On node 0, zone Normal: 10241 pages in unavailable ranges
[    0.023656] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.024054] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 
0-23
[    0.024057] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, 
GSI 24-55
[    0.024071] efi_bgrt: Ignoring BGRT: invalid image address
[    0.024123] [mem 0xbd800000-0xfebfffff] available for PCI devices
[    0.024124] Booting paravirtualized kernel on bare hardware
[    0.024127] clocksource: refined-jiffies: mask: 0xffffffff 
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.028358] Built 1 zonelists, mobility grouping on.  Total pages: 
1006807
[    0.028359] Policy zone: Normal
[    0.028361] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-13-amd64 
root=UUID=944a307b-8423-4092-8d5c-fa5d0f3b646a ro quiet
[    0.029102] Dentry cache hash table entries: 524288 (order: 10, 
4194304 bytes, linear)
[    0.029377] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes, linear)
[    0.029409] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.040712] AGP: Checking aperture...
[    0.046920] AGP: No AGP bridge found
[    0.046924] AGP: Node 0: aperture [bus addr 0xa4000000-0xa5ffffff] (32MB)
[    0.046925] Aperture pointing to e820 RAM. Ignoring.
[    0.046926] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.046926] AGP: Please enable the IOMMU option in the BIOS setup
[    0.046927] AGP: This costs you 64MB of RAM
[    0.046930] AGP: Mapping aperture over RAM [mem 
0xa4000000-0xa7ffffff] (65536KB)
[    0.061742] ftrace: allocating 36453 entries in 143 pages
[    0.075050] ftrace: allocated 143 pages with 5 groups
[    0.075195] rcu: Hierarchical RCU implementation.
[    0.075197]     Rude variant of Tasks RCU enabled.
[    0.075198]     Tracing variant of Tasks RCU enabled.
[    0.075199] rcu: RCU calculated value of scheduler-enlistment delay 
is 25 jiffies.
[    0.079209] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16
[    0.079537] Console: colour dummy device 80x25
[    0.079550] printk: console [tty0] enabled
[    0.079638] clocksource: hpet: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 133484873504 ns
[    0.079649] APIC: Switch to symmetric I/O mode setup
[    0.080079] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.099652] clocksource: tsc-early: mask: 0xffffffffffffffff 
max_cycles: 0x329e5d4e4cb, max_idle_ns: 440795250690 ns
[    0.099655] Calibrating delay loop (skipped), value calculated using 
timer frequency.. 7023.33 BogoMIPS (lpj=14046664)
[    0.099657] pid_max: default: 32768 minimum: 301
[    0.107532] LSM: Security Framework initializing
[    0.107542] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.107572] AppArmor: AppArmor initialized
[    0.107574] TOMOYO Linux initialized
[    0.107601] Mount-cache hash table entries: 8192 (order: 4, 65536 
bytes, linear)
[    0.107614] Mountpoint-cache hash table entries: 8192 (order: 4, 
65536 bytes, linear)
[    0.107871] LVT offset 1 assigned for vector 0xf9
[    0.107876] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.107877] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.107880] Spectre V1 : Mitigation: usercopy/swapgs barriers and 
__user pointer sanitization
[    0.107881] Spectre V2 : Mitigation: Retpolines
[    0.107882] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling 
RSB on context switch
[    0.107883] Speculative Store Bypass: Mitigation: Speculative Store 
Bypass disabled via prctl and seccomp
[    0.108001] Freeing SMP alternatives memory: 32K
[    0.223653] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.223653] ... version:                0
[    0.223653] ... bit width:              48
[    0.223653] ... generic registers:      6
[    0.223653] ... value mask:             0000ffffffffffff
[    0.223653] ... max period:             00007fffffffffff
[    0.223653] ... fixed-purpose events:   0
[    0.223653] ... event mask:             000000000000003f
[    0.223653] rcu: Hierarchical SRCU implementation.
[    0.223653] NMI watchdog: Enabled. Permanently consumes one hw-PMU 
counter.
[    0.223653] x86: Booting SMP configuration:
[    0.239706] smpboot: Max logical packages: 1
[    0.239706] smpboot: Total of 8 processors activated (56186.65 BogoMIPS)
[    0.249291] node 0 deferred pages initialised in 0ms
[    0.249293] devtmpfs: initialized
[    0.249293] x86/mm: Memory block size: 128MB
[    0.249293] clocksource: jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.249293] futex hash table entries: 2048 (order: 5, 131072 bytes, 
linear)
[    0.249293] pinctrl core: initialized pinctrl subsystem
[    0.249293] NET: Registered protocol family 16
[    0.249293] audit: initializing netlink subsys (disabled)
[    0.249317] audit: type=2000 audit(1653791021.168:1): 
state=initialized audit_enabled=0 res=1
[    0.249317] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.249317] PCI: not using MMCONFIG
[    0.249317] PCI: Using configuration type 1 for base access
[    0.249317] PCI: Using configuration type 1 for extended access
[    0.252299] Kprobes globally optimized
[    0.252304] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.252304] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.425403] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.431325] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    0.431607] PCI host bridge to bus 0000:00
[    0.431609] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.431610] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.431611] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.431612] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.431614] pci_bus 0000:00: root bus resource [mem 
0x000a0000-0x000bffff window]
[    0.431615] pci_bus 0000:00: root bus resource [mem 
0x000c0000-0x000dffff window]
[    0.431616] pci_bus 0000:00: root bus resource [mem 
0xc0000000-0xffffffff window]
[    0.431617] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.431629] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.431755] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.431771] pci 0000:00:02.0: enabling Extended Tags
[    0.431793] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.431881] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.431896] pci 0000:00:04.0: enabling Extended Tags
[    0.431917] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.432006] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[    0.432021] pci 0000:00:05.0: enabling Extended Tags
[    0.432042] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.432129] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    0.432144] pci 0000:00:09.0: enabling Extended Tags
[    0.432165] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.432249] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[    0.432264] pci 0000:00:0a.0: enabling Extended Tags
[    0.432285] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.432367] pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
[    0.432383] pci 0000:00:0b.0: enabling Extended Tags
[    0.432403] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
[    0.432486] pci 0000:00:0c.0: [1002:5a20] type 01 class 0x060400
[    0.432501] pci 0000:00:0c.0: enabling Extended Tags
[    0.432522] pci 0000:00:0c.0: PME# supported from D0 D3hot D3cold
[    0.432604] pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
[    0.432620] pci 0000:00:0d.0: enabling Extended Tags
[    0.432641] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[    0.432735] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.432747] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    0.432754] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    0.432760] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    0.432767] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    0.432774] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    0.432780] pci 0000:00:11.0: reg 0x24: [mem 0xfe80b000-0xfe80b3ff]
[    0.432887] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.432899] pci 0000:00:12.0: reg 0x10: [mem 0xfe80a000-0xfe80afff]
[    0.433024] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.433059] pci 0000:00:12.2: reg 0x10: [mem 0xfe809000-0xfe8090ff]
[    0.433117] pci 0000:00:12.2: supports D1 D2
[    0.433118] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.433202] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.433214] pci 0000:00:13.0: reg 0x10: [mem 0xfe808000-0xfe808fff]
[    0.433334] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.433346] pci 0000:00:13.2: reg 0x10: [mem 0xfe807000-0xfe8070ff]
[    0.433404] pci 0000:00:13.2: supports D1 D2
[    0.433405] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.433491] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.433614] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.433628] pci 0000:00:14.2: reg 0x10: [mem 0xfe800000-0xfe803fff 64bit]
[    0.433677] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.433755] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.433876] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.433980] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.433991] pci 0000:00:14.5: reg 0x10: [mem 0xfe806000-0xfe806fff]
[    0.434117] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.434145] pci 0000:00:15.0: enabling Extended Tags
[    0.434179] pci 0000:00:15.0: supports D1 D2
[    0.434282] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.434310] pci 0000:00:15.1: enabling Extended Tags
[    0.434345] pci 0000:00:15.1: supports D1 D2
[    0.434437] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
[    0.434465] pci 0000:00:15.2: enabling Extended Tags
[    0.434499] pci 0000:00:15.2: supports D1 D2
[    0.434595] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
[    0.434623] pci 0000:00:15.3: enabling Extended Tags
[    0.434657] pci 0000:00:15.3: supports D1 D2
[    0.434748] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.434760] pci 0000:00:16.0: reg 0x10: [mem 0xfe805000-0xfe805fff]
[    0.434880] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.434892] pci 0000:00:16.2: reg 0x10: [mem 0xfe804000-0xfe8040ff]
[    0.434950] pci 0000:00:16.2: supports D1 D2
[    0.434951] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.435036] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.435106] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.435176] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.435243] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.435311] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.435375] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.435636] pci 0000:01:00.0: [1103:2722] type 00 class 0x010400
[    0.435647] pci 0000:01:00.0: reg 0x10: [mem 0xfe740000-0xfe75ffff 64bit]
[    0.435656] pci 0000:01:00.0: reg 0x18: [mem 0xfe700000-0xfe73ffff 64bit]
[    0.435666] pci 0000:01:00.0: reg 0x30: [mem 0xfe760000-0xfe76ffff pref]
[    0.435670] pci 0000:01:00.0: enabling Extended Tags
[    0.435706] pci 0000:01:00.0: supports D1
[    0.435707] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[    0.435760] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.435764] pci 0000:00:02.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.435938] pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
[    0.435950] pci 0000:02:00.0: reg 0x10: [io  0xe050-0xe057]
[    0.435957] pci 0000:02:00.0: reg 0x14: [io  0xe040-0xe043]
[    0.435963] pci 0000:02:00.0: reg 0x18: [io  0xe030-0xe037]
[    0.435970] pci 0000:02:00.0: reg 0x1c: [io  0xe020-0xe023]
[    0.435977] pci 0000:02:00.0: reg 0x20: [io  0xe000-0xe01f]
[    0.435983] pci 0000:02:00.0: reg 0x24: [mem 0xfe600000-0xfe6001ff]
[    0.436085] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.436088] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.436090] pci 0000:00:04.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.436128] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
[    0.436140] pci 0000:03:00.0: reg 0x10: [io  0xd050-0xd057]
[    0.436147] pci 0000:03:00.0: reg 0x14: [io  0xd040-0xd043]
[    0.436153] pci 0000:03:00.0: reg 0x18: [io  0xd030-0xd037]
[    0.436160] pci 0000:03:00.0: reg 0x1c: [io  0xd020-0xd023]
[    0.436167] pci 0000:03:00.0: reg 0x20: [io  0xd000-0xd01f]
[    0.436173] pci 0000:03:00.0: reg 0x24: [mem 0xfe500000-0xfe5001ff]
[    0.436272] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.436275] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
[    0.436277] pci 0000:00:05.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.436318] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.436337] pci 0000:04:00.0: reg 0x10: [mem 0xfe400000-0xfe407fff 64bit]
[    0.436430] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.436502] pci 0000:00:09.0: PCI bridge to [bus 04]
[    0.436505] pci 0000:00:09.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.436701] pci 0000:00:0a.0: PCI bridge to [bus 05]
[    0.436862] pci 0000:00:0b.0: PCI bridge to [bus 06]
[    0.437039] pci 0000:07:00.0: [14e4:163d] type 00 class 0x020000
[    0.437053] pci 0000:07:00.0: reg 0x10: [mem 0xd3000000-0xd37fffff 
64bit pref]
[    0.437062] pci 0000:07:00.0: reg 0x18: [mem 0xd2800000-0xd2ffffff 
64bit pref]
[    0.437071] pci 0000:07:00.0: reg 0x20: [mem 0xd3800000-0xd380ffff 
64bit pref]
[    0.437077] pci 0000:07:00.0: reg 0x30: [mem 0xfe300000-0xfe37ffff pref]
[    0.437082] pci 0000:07:00.0: enabling Extended Tags
[    0.437142] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[    0.437166] pci 0000:07:00.0: reg 0x1e4: [mem 0xd3810000-0xd3817fff 
64bit pref]
[    0.437167] pci 0000:07:00.0: VF(n) BAR0 space: [mem 
0xd3810000-0xd388ffff 64bit pref] (contains BAR0 for 16 VFs)
[    0.437184] pci 0000:07:00.0: reg 0x1f4: [mem 0xd3890000-0xd3891fff 
64bit pref]
[    0.437186] pci 0000:07:00.0: VF(n) BAR4 space: [mem 
0xd3890000-0xd38affff 64bit pref] (contains BAR4 for 16 VFs)
[    0.437284] pci 0000:00:0c.0: PCI bridge to [bus 07]
[    0.437288] pci 0000:00:0c.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.437290] pci 0000:00:0c.0:   bridge window [mem 
0xd2800000-0xd38fffff 64bit pref]
[    0.437460] pci 0000:08:00.0: [10de:10c3] type 00 class 0x030000
[    0.437470] pci 0000:08:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[    0.437478] pci 0000:08:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 
64bit pref]
[    0.437486] pci 0000:08:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 
64bit pref]
[    0.437492] pci 0000:08:00.0: reg 0x24: [io  0xc000-0xc07f]
[    0.437498] pci 0000:08:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[    0.437502] pci 0000:08:00.0: enabling Extended Tags
[    0.437513] pci 0000:08:00.0: BAR 3: assigned to efifb
[    0.437567] pci 0000:08:00.0: 8.000 Gb/s available PCIe bandwidth, 
limited by 2.5 GT/s PCIe x4 link at 0000:00:0d.0 (capable of 32.000 Gb/s 
with 2.5 GT/s PCIe x16 link)
[    0.437606] pci 0000:08:00.1: [10de:0be3] type 00 class 0x040300
[    0.437615] pci 0000:08:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[    0.437639] pci 0000:08:00.1: enabling Extended Tags
[    0.437722] pci 0000:00:0d.0: PCI bridge to [bus 08]
[    0.437724] pci 0000:00:0d.0:   bridge window [io  0xc000-0xcfff]
[    0.437726] pci 0000:00:0d.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.437729] pci 0000:00:0d.0:   bridge window [mem 
0xc0000000-0xd1ffffff 64bit pref]
[    0.437737] pci_bus 0000:09: extended config space not accessible
[    0.437786] pci 0000:00:14.4: PCI bridge to [bus 09] (subtractive decode)
[    0.437793] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af 
window] (subtractive decode)
[    0.437794] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 
window] (subtractive decode)
[    0.437795] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df 
window] (subtractive decode)
[    0.437796] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff 
window] (subtractive decode)
[    0.437797] pci 0000:00:14.4:   bridge window [mem 
0x000a0000-0x000bffff window] (subtractive decode)
[    0.437798] pci 0000:00:14.4:   bridge window [mem 
0x000c0000-0x000dffff window] (subtractive decode)
[    0.437799] pci 0000:00:14.4:   bridge window [mem 
0xc0000000-0xffffffff window] (subtractive decode)
[    0.438004] pci 0000:00:15.0: PCI bridge to [bus 0a]
[    0.438065] pci 0000:0b:00.0: [10ec:8168] type 00 class 0x020000
[    0.438083] pci 0000:0b:00.0: reg 0x10: [io  0xb000-0xb0ff]
[    0.438107] pci 0000:0b:00.0: reg 0x18: [mem 0xd3a04000-0xd3a04fff 
64bit pref]
[    0.438122] pci 0000:0b:00.0: reg 0x20: [mem 0xd3a00000-0xd3a03fff 
64bit pref]
[    0.438214] pci 0000:0b:00.0: supports D1 D2
[    0.438215] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.438314] pci 0000:00:15.1: PCI bridge to [bus 0b]
[    0.438318] pci 0000:00:15.1:   bridge window [io  0xb000-0xbfff]
[    0.438323] pci 0000:00:15.1:   bridge window [mem 
0xd3a00000-0xd3afffff 64bit pref]
[    0.438376] pci 0000:0c:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.438401] pci 0000:0c:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
[    0.438525] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[    0.438608] pci 0000:00:15.2: PCI bridge to [bus 0c]
[    0.438613] pci 0000:00:15.2:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.438669] pci 0000:0d:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.438694] pci 0000:0d:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
[    0.438816] pci 0000:0d:00.0: PME# supported from D3hot D3cold
[    0.438897] pci 0000:00:15.3: PCI bridge to [bus 0d]
[    0.438902] pci 0000:00:15.3:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.439863] iommu: Default domain type: Translated
[    0.439885] pci 0000:08:00.0: vgaarb: setting as boot VGA device
[    0.439885] pci 0000:08:00.0: vgaarb: VGA device added: 
decodes=io+mem,owns=io+mem,locks=none
[    0.439885] pci 0000:08:00.0: vgaarb: bridge control possible
[    0.439885] vgaarb: loaded
[    0.439885] Registered efivars operations
[    0.439885] NetLabel: Initializing
[    0.439885] NetLabel:  domain hash size = 128
[    0.439885] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.439885] NetLabel:  unlabeled traffic allowed by default
[    0.446441] PCI: pci_cache_line_size set to 64 bytes
[    0.446509] e820: reserve RAM buffer [mem 0xae852000-0xafffffff]
[    0.446510] e820: reserve RAM buffer [mem 0xba789000-0xbbffffff]
[    0.446511] e820: reserve RAM buffer [mem 0xbca13000-0xbfffffff]
[    0.446512] e820: reserve RAM buffer [mem 0xbd043000-0xbfffffff]
[    0.446514] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
[    0.446515] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.446531] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.446535] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.447721] clocksource: Switched to clocksource tsc-early
[    0.459792] VFS: Disk quotas dquot_6.6.0
[    0.459807] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 
bytes)
[    0.459931] AppArmor: AppArmor Filesystem Enabled
[    0.460062] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.460331] system 00:01: [io  0x040b] has been reserved
[    0.460332] system 00:01: [io  0x04d6] has been reserved
[    0.460334] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.460335] system 00:01: [io  0x0c14] has been reserved
[    0.460336] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.460338] system 00:01: [io  0x0c52] has been reserved
[    0.460339] system 00:01: [io  0x0c6c] has been reserved
[    0.460340] system 00:01: [io  0x0c6f] has been reserved
[    0.460341] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.460342] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.460344] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.460345] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.460346] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.460347] system 00:01: [io  0x0800-0x089f] has been reserved
[    0.460349] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.460350] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.460351] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.460352] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.460354] system 00:01: [mem 0xfec00000-0xfec00fff] could not be 
reserved
[    0.460356] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.460357] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.460359] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.460361] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.460362] system 00:01: [mem 0xfed00000-0xfed00fff] could not be 
reserved
[    0.460364] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[    0.460504] system 00:02: [io  0x0290-0x02af] has been reserved
[    0.460595] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.460801] pnp 00:06: [dma 0 disabled]
[    0.461042] system 00:08: [mem 0xfec20000-0xfec200ff] could not be 
reserved
[    0.467314] clocksource: acpi_pm: mask: 0xffffff max_cycles: 
0xffffff, max_idle_ns: 2085701024 ns
[    0.467389] NET: Registered protocol family 2
[    0.467491] IP idents hash table entries: 65536 (order: 7, 524288 
bytes, linear)
[    0.468444] tcp_listen_portaddr_hash hash table entries: 2048 (order: 
3, 32768 bytes, linear)
[    0.468493] TCP established hash table entries: 32768 (order: 6, 
262144 bytes, linear)
[    0.468608] TCP bind hash table entries: 32768 (order: 7, 524288 
bytes, linear)
[    0.468654] TCP: Hash tables configured (established 32768 bind 32768)
[    0.468714] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.468733] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, 
linear)
[    0.468769] NET: Registered protocol family 1
[    0.468777] NET: Registered protocol family 44
[    0.468795] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.468798] pci 0000:00:02.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.468802] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.468803] pci 0000:00:04.0:   bridge window [io  0xe000-0xefff]
[    0.468806] pci 0000:00:04.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    0.468809] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.468810] pci 0000:00:05.0:   bridge window [io  0xd000-0xdfff]
[    0.468812] pci 0000:00:05.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.468815] pci 0000:00:09.0: PCI bridge to [bus 04]
[    0.468817] pci 0000:00:09.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.468820] pci 0000:00:0a.0: PCI bridge to [bus 05]
[    0.468824] pci 0000:00:0b.0: PCI bridge to [bus 06]
[    0.468828] pci 0000:00:0c.0: PCI bridge to [bus 07]
[    0.468830] pci 0000:00:0c.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.468832] pci 0000:00:0c.0:   bridge window [mem 
0xd2800000-0xd38fffff 64bit pref]
[    0.468834] pci 0000:00:0d.0: PCI bridge to [bus 08]
[    0.468836] pci 0000:00:0d.0:   bridge window [io  0xc000-0xcfff]
[    0.468838] pci 0000:00:0d.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.468839] pci 0000:00:0d.0:   bridge window [mem 
0xc0000000-0xd1ffffff 64bit pref]
[    0.468842] pci 0000:00:14.4: PCI bridge to [bus 09]
[    0.468850] pci 0000:00:15.0: PCI bridge to [bus 0a]
[    0.468857] pci 0000:00:15.1: PCI bridge to [bus 0b]
[    0.468859] pci 0000:00:15.1:   bridge window [io  0xb000-0xbfff]
[    0.468863] pci 0000:00:15.1:   bridge window [mem 
0xd3a00000-0xd3afffff 64bit pref]
[    0.468866] pci 0000:00:15.2: PCI bridge to [bus 0c]
[    0.468869] pci 0000:00:15.2:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.468874] pci 0000:00:15.3: PCI bridge to [bus 0d]
[    0.468877] pci 0000:00:15.3:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.468883] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.468884] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.468885] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.468886] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.468887] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff 
window]
[    0.468888] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff 
window]
[    0.468889] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff 
window]
[    0.468891] pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.468892] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.468893] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
[    0.468894] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.468895] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.468896] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.468898] pci_bus 0000:07: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.468899] pci_bus 0000:07: resource 2 [mem 0xd2800000-0xd38fffff 
64bit pref]
[    0.468900] pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
[    0.468901] pci_bus 0000:08: resource 1 [mem 0xfd000000-0xfe0fffff]
[    0.468902] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xd1ffffff 
64bit pref]
[    0.468903] pci_bus 0000:09: resource 4 [io  0x0000-0x03af window]
[    0.468904] pci_bus 0000:09: resource 5 [io  0x03e0-0x0cf7 window]
[    0.468905] pci_bus 0000:09: resource 6 [io  0x03b0-0x03df window]
[    0.468906] pci_bus 0000:09: resource 7 [io  0x0d00-0xffff window]
[    0.468907] pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000bffff 
window]
[    0.468909] pci_bus 0000:09: resource 9 [mem 0x000c0000-0x000dffff 
window]
[    0.468910] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xffffffff 
window]
[    0.468911] pci_bus 0000:0b: resource 0 [io  0xb000-0xbfff]
[    0.468912] pci_bus 0000:0b: resource 2 [mem 0xd3a00000-0xd3afffff 
64bit pref]
[    0.468913] pci_bus 0000:0c: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.468914] pci_bus 0000:0d: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.551046] pci 0000:08:00.0: Video device with shadowed ROM at [mem 
0x000c0000-0x000dffff]
[    0.551072] pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
[    0.551320] PCI: CLS 64 bytes, default 64
[    0.551366] Trying to unpack rootfs image as initramfs...
[    1.201563] Freeing initrd memory: 44288K
[    1.202141] PCI-DMA: Disabling AGP.
[    1.202206] PCI-DMA: aperture base @ a4000000 size 65536 KB
[    1.202207] PCI-DMA: using GART IOMMU.
[    1.202209] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.204959] amd_uncore: 4  amd_nb counters detected
[    1.205145] LVT offset 0 assigned for vector 0x400
[    1.205215] perf: AMD IBS detected (0x000000ff)
[    1.205619] Initialise system trusted keyrings
[    1.205626] Key type blacklist registered
[    1.205693] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.206919] zbud: loaded
[    1.207112] integrity: Platform Keyring initialized
[    1.207114] Key type asymmetric registered
[    1.207115] Asymmetric key parser 'x509' registered
[    1.207162] io scheduler mq-deadline registered
[    1.208510] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.208523] efifb: probing for efifb
[    1.208555] efifb: framebuffer at 0xd1000000, using 3072k, total 3072k
[    1.208556] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.208557] efifb: scrolling: redraw
[    1.208558] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.208649] Console: switching to colour frame buffer device 128x48
[    1.212892] fb0: EFI VGA frame buffer device
[    1.213829] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.213953] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) 
is a 16550A
[    1.214628] Linux agpgart interface v0.103
[    1.214665] AMD-Vi: AMD IOMMUv2 functionality not available on this 
system - This is not a bug.
[    1.215839] NET: Registered protocol family 10
[    1.222732] Segment Routing with IPv6
[    1.222750] mip6: Mobile IPv6
[    1.222752] NET: Registered protocol family 17
[    1.222795] mpls_gso: MPLS GSO support
[    1.223299] microcode: Microcode Update Driver: v2.2.
[    1.223303] IPI shorthand broadcast: enabled
[    1.223309] sched_clock: Marking stable (1223047001, 
158723)->(1500052192, -276846468)
[    1.223429] registered taskstats version 1
[    1.223432] Loading compiled-in X.509 certificates
[    1.260218] Loaded X.509 cert 'Debian Secure Boot CA: 
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    1.260235] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - 
linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[    1.260285] zswap: loaded using pool lzo/zbud
[    1.260491] Key type ._fscrypt registered
[    1.260492] Key type .fscrypt registered
[    1.260493] Key type fscrypt-provisioning registered
[    1.260523] AppArmor: AppArmor sha1 policy hashing enabled
[    1.262489] Freeing unused kernel image (initmem) memory: 2412K
[    1.342202] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.342206] Run /init as init process
[    1.342207]   with arguments:
[    1.342208]     /init
[    1.342209]   with environment:
[    1.342209]     HOME=/
[    1.342210]     TERM=linux
[    1.342210]     BOOT_IMAGE=/vmlinuz-5.10.0-13-amd64
[    1.397501] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.411773] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.419190] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, 
revision 0
[    1.419197] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus 
port selection
[    1.419313] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller 
at 0xb20
[    1.420748] r8169 0000:0b:00.0: can't disable ASPM; OS doesn't have 
ASPM control
[    1.433467] r8169 0000:0b:00.0 eth0: RTL8168f/8111f, 
50:46:5d:65:15:9c, XID 480, IRQ 39
[    1.433469] r8169 0000:0b:00.0 eth0: jumbo features [frames: 9194 
bytes, tx checksumming: ko]
[    1.433588] QUIRK: Enable AMD PLL fix
[    1.438896] pps_core: LinuxPPS API ver. 1 registered
[    1.438898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 
Rodolfo Giometti <giometti@linux.it>
[    1.440290] PTP clock support registered
[    1.458361] r8169 0000:0b:00.0 enp11s0: renamed from eth0
[    1.465675] bnx2x: disagrees about version of symbol module_layout
[    1.549568] MXM: GUID detected in BIOS
[    1.615863] checking generic (d1000000 300000) vs hw (fd000000 1000000)
[    1.615864] checking generic (d1000000 300000) vs hw (c0000000 10000000)
[    1.615865] checking generic (d1000000 300000) vs hw (d0000000 2000000)
[    1.615883] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.677057] Console: switching to colour dummy device 80x25
[    1.802818] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 
0x96 quirks 0x0000000000080000
[    1.803646] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.820635] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[    1.927730] xhci_hcd 0000:0c:00.0: hcc params 0x0200f180 hci version 
0x96 quirks 0x0000000000080000
[    1.943842] xhci_hcd 0000:0c:00.0: xHCI Host Controller
[    2.728507] ohci-pci: OHCI PCI platform driver
[    3.516061] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[    3.745927] xhci_hcd 0000:0d:00.0: hcc params 0x0200f180 hci version 
0x96 quirks 0x0000000000080000
[    3.746448] tsc: Refined TSC clocksource calibration: 3511.873 MHz
[    3.746457] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 
0x329f211d271, max_idle_ns: 440795246957 ns
[    3.746508] clocksource: Switched to clocksource tsc
[    3.746598] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    3.747158] [TTM] Zone  kernel: Available graphics memory: 1961040 KiB
[    3.747159] [TTM] Initializing pool allocator
[    3.747166] [TTM] Initializing DMA pool allocator
[    3.763216] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe80a000
[    3.763250] xhci_hcd 0000:0d:00.0: xHCI Host Controller
[    3.824063] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    3.824089] ohci-pci 0000:00:13.0: irq 20, io mem 0xfe808000
[    3.846961] Console: switching to colour frame buffer device 170x48
[    3.888123] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    3.888144] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe806000
[    3.952081] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    3.952113] ohci-pci 0000:00:16.0: irq 22, io mem 0xfe805000
[    4.388831] hid: raw HID events driver (C) Jiri Kosina
[    4.751505] random: fast init done
[   10.816509] xor: automatically using best checksumming function   avx
[   10.817149] async_tx: api initialized (async)
[   10.828468] random: crng init done
[   11.413608] PM: Image not found (code -22)
[   11.544183] Not activating Mandatory Access Control as 
/sbin/tomoyo-init does not exist.
[   11.605996] systemd[1]: Inserted module 'autofs4'
[   11.637306] systemd[1]: systemd 247.3-7 running in system mode. (+PAM 
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP 
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD 
+IDN2 -IDN +PCRE2 default-hierarchy=unified)
[   11.659872] systemd[1]: Detected architecture x86-64.
[   11.660225] systemd[1]: Set hostname to <Backup>.
[   11.768173] systemd[1]: 
/lib/systemd/system/plymouth-start.service:16: Unit configured to use 
KillMode=none. This is unsafe, as it disables systemd's process 
lifecycle management for the service. Please update your service to use 
a safer KillMode=, such as 'mixed' or 'control-group'. Support for 
KillMode=none is deprecated and will eventually be removed.
[   11.791051] systemd[1]: Queued start job for default target Graphical 
Interface.
[   11.792183] systemd[1]: Created slice system-getty.slice.
[   11.792404] systemd[1]: Created slice system-modprobe.slice.
[   11.792655] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   11.792820] systemd[1]: Created slice User and Session Slice.
[   11.792873] systemd[1]: Started Forward Password Requests to Wall 
Directory Watch.
[   11.793029] systemd[1]: Set up automount Arbitrary Executable File 
Formats File System Automount Point.
[   11.793091] systemd[1]: Reached target User and Group Name Lookups.
[   11.793102] systemd[1]: Reached target Remote File Systems.
[   11.793111] systemd[1]: Reached target Slices.
[   11.793218] systemd[1]: Listening on Syslog Socket.
[   11.793285] systemd[1]: Listening on fsck to fsckd communication Socket.
[   11.793327] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   11.793440] systemd[1]: Listening on Journal Audit Socket.
[   11.793510] systemd[1]: Listening on Journal Socket (/dev/log).
[   11.793594] systemd[1]: Listening on Journal Socket.
[   11.793841] systemd[1]: Listening on udev Control Socket.
[   11.793913] systemd[1]: Listening on udev Kernel Socket.
[   11.794578] systemd[1]: Mounting Huge Pages File System...
[   11.795318] systemd[1]: Mounting POSIX Message Queue File System...
[   11.796159] systemd[1]: Mounting Kernel Debug File System...
[   11.796945] systemd[1]: Mounting Kernel Trace File System...
[   11.798112] systemd[1]: Starting Set the console keyboard layout...
[   11.798990] systemd[1]: Starting Create list of static device nodes 
for the current kernel...
[   11.799974] systemd[1]: Starting Load Kernel Module configfs...
[   11.800889] systemd[1]: Starting Load Kernel Module drm...
[   11.801846] systemd[1]: Starting Load Kernel Module fuse...
[   11.802390] systemd[1]: Condition check resulted in Set Up Additional 
Binary Formats being skipped.
[   11.802429] systemd[1]: Condition check resulted in File System Check 
on Root Device being skipped.
[   11.804045] systemd[1]: Starting Journal Service...
[   11.805568] systemd[1]: Starting Load Kernel Modules...
[   11.806424] systemd[1]: Starting Remount Root and Kernel File Systems...
[   11.807346] systemd[1]: Starting Coldplug All udev Devices...
[   11.809071] systemd[1]: Mounted Huge Pages File System.
[   11.809187] systemd[1]: Mounted POSIX Message Queue File System.
[   11.809308] systemd[1]: Mounted Kernel Debug File System.
[   11.809413] systemd[1]: Mounted Kernel Trace File System.
[   11.809720] systemd[1]: Finished Create list of static device nodes 
for the current kernel.
[   11.810033] systemd[1]: modprobe@configfs.service: Succeeded.
[   11.810258] systemd[1]: Finished Load Kernel Module configfs.
[   11.810516] systemd[1]: modprobe@drm.service: Succeeded.
[   11.810769] systemd[1]: Finished Load Kernel Module drm.
[   11.811733] systemd[1]: Mounting Kernel Configuration File System...
[   11.813186] fuse: init (API version 7.32)
[   11.814137] systemd[1]: modprobe@fuse.service: Succeeded.
[   11.814348] systemd[1]: Finished Load Kernel Module fuse.
[   11.814473] systemd[1]: Mounted Kernel Configuration File System.
[   11.815284] systemd[1]: Mounting FUSE Control File System...
[   11.817872] systemd[1]: Finished Remount Root and Kernel File Systems.
[   11.818037] systemd[1]: Mounted FUSE Control File System.
[   11.819234] systemd[1]: Condition check resulted in Platform 
Persistent Storage Archival being skipped.
[   11.820051] systemd[1]: Starting Load/Save Random Seed...
[   11.821108] systemd[1]: Starting Create System Users...
[   11.823461] lp: driver loaded but no devices found
[   11.826538] ppdev: user-space parallel port driver
[   11.834836] systemd[1]: Finished Load/Save Random Seed.
[   11.834985] systemd[1]: Condition check resulted in First Boot 
Complete being skipped.
[   11.837125] systemd[1]: Finished Load Kernel Modules.
[   11.837478] systemd[1]: Finished Create System Users.
[   11.838318] systemd[1]: Starting Apply Kernel Variables...
[   11.839128] systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.846814] systemd[1]: Finished Apply Kernel Variables.
[   11.851852] systemd[1]: Finished Create Static Device Nodes in /dev.
[   11.853377] systemd[1]: Starting Rule-based Manager for Device Events 
and Files...
[   11.892490] systemd[1]: Finished Set the console keyboard layout.
[   11.892627] systemd[1]: Reached target Local File Systems (Pre).
[   11.914907] systemd[1]: Started Rule-based Manager for Device Events 
and Files.
[   11.920483] systemd[1]: Finished Coldplug All udev Devices.
[   11.921828] systemd[1]: Starting Helper to synchronize boot up for 
ifupdown...
[   11.922901] systemd[1]: Starting Show Plymouth Boot Screen...
[   11.942248] systemd[1]: Finished Helper to synchronize boot up for 
ifupdown.
[   11.951519] systemd[1]: Started Show Plymouth Boot Screen.
[   11.951644] systemd[1]: Condition check resulted in Dispatch Password 
Requests to Console Directory Watch being skipped.
[   11.951773] systemd[1]: Started Forward Password Requests to Plymouth 
Directory Watch.
[   11.951795] systemd[1]: Reached target Local Encrypted Volumes.
[   11.963476] systemd[1]: Started Journal Service.
[   11.983392] systemd-journald[360]: Received client request to flush 
runtime journal.
[   12.075903] bnx2x: disagrees about version of symbol module_layout
[   12.091742] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   12.091845] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO 
address
[   12.091927] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec 
(nowayout=0)
[   12.138987] pstore: Using crash dump compression: deflate
[   12.138997] pstore: Registered efi as persistent store backend
[   12.158259] AVX version of gcm_enc/dec engaged.
[   12.158262] AES CTR mode by8 optimization enabled
[   12.166239] asus_wmi: ASUS WMI generic driver loaded
[   12.167334] asus_wmi: Initialization: 0x0
[   12.167367] asus_wmi: BIOS WMI version: 0.9
[   12.167426] asus_wmi: SFUN value: 0x0
[   12.167429] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[   12.168030] input: Eee PC WMI hotkeys as 
/devices/platform/eeepc-wmi/input/input5
[   12.175198] snd_hda_intel 0000:08:00.1: enabling device (0000 -> 0002)
[   12.175237] snd_hda_intel 0000:08:00.1: Disabling MSI
[   12.380349] kvm: Nested Virtualization enabled
[   12.380355] SVM: kvm: Nested Paging enabled
[   12.383000] MCE: In-kernel MCE decoding enabled.
[   12.651813] audit: type=1400 audit(1653791033.935:2): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="lsb_release" pid=679 comm="apparmor_parser"
[   12.652174] audit: type=1400 audit(1653791033.935:3): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffice-senddoc" pid=675 comm="apparmor_parser"
[   12.652487] audit: type=1400 audit(1653791033.935:4): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffice-xpdfimport" pid=676 comm="apparmor_parser"
[   12.653514] audit: type=1400 audit(1653791033.935:5): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffice-oopslash" pid=677 comm="apparmor_parser"
[   12.653933] audit: type=1400 audit(1653791033.935:6): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/sbin/cups-browsed" pid=680 comm="apparmor_parser"
[   12.657835] audit: type=1400 audit(1653791033.939:7): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=682 
comm="apparmor_parser"
[   12.657840] audit: type=1400 audit(1653791033.939:8): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" 
pid=682 comm="apparmor_parser"
[   12.657904] audit: type=1400 audit(1653791033.939:9): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="nvidia_modprobe" pid=685 comm="apparmor_parser"
[   12.657908] audit: type=1400 audit(1653791033.939:10): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="nvidia_modprobe//kmod" pid=685 comm="apparmor_parser"
[   12.658513] audit: type=1400 audit(1653791033.939:11): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/bin/man" pid=686 comm="apparmor_parser"
[   12.976323] r8169 0000:0b:00.0: firmware: failed to load 
rtl_nic/rtl8168f-1.fw (-2)
[   12.976478] firmware_class: See https://wiki.debian.org/Firmware for 
information about missing firmware
[   12.976632] r8169 0000:0b:00.0: Direct firmware load for 
rtl_nic/rtl8168f-1.fw failed with error -2
[   12.976636] r8169 0000:0b:00.0: Unable to load firmware 
rtl_nic/rtl8168f-1.fw (-2)
[   12.977326] RTL8211E Gigabit Ethernet r8169-0-b00:00: attached PHY 
driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-b00:00, 
irq=IGNORE)
[   13.046445] r8169 0000:0b:00.0 enp11s0: Link is Down

Re: Module failure on new install of Debian Bullseye

[Christophe Leroy]

Le 30/05/2022 à 01:46, Leslie Rhorer a écrit :
> 
>      Below is the output of dmesg after removing quite a few of what I
> am certain are unrelated lines:
> 
> [    0.000000] Linux version 5.10.0-13-amd64
> (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1
> 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian
> 5.10.106-1 (2022-03-17)

> [    1.465675] bnx2x: disagrees about version of symbol module_layout

> [   12.075903] bnx2x: disagrees about version of symbol module_layout


Those two messages means that you are trying to use modules that were 
built for a different kernel version.

As far as I can see you are using kernel 5.10

You have to use bnx2 modules for that exact kernel.


Christophe

Re: Module failure on new install of Debian Bullseye

[Leslie Rhorer]

On 5/30/2022 1:08 AM, Christophe Leroy wrote:
> 
> 
> Le 30/05/2022 à 01:46, Leslie Rhorer a écrit :
>>
>>       Below is the output of dmesg after removing quite a few of what I
>> am certain are unrelated lines:
>>
>> [    0.000000] Linux version 5.10.0-13-amd64
>> (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1
>> 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian
>> 5.10.106-1 (2022-03-17)
> 
>> [    1.465675] bnx2x: disagrees about version of symbol module_layout
> 
>> [   12.075903] bnx2x: disagrees about version of symbol module_layout
> 
> 
> Those two messages means that you are trying to use modules that were
> built for a different kernel version.

	That is pretty clear

> 
> As far as I can see you are using kernel 5.10
> 
> You have to use bnx2 modules for that exact kernel.

	Right.  I thought of compiling them myself, but so far I have not been 
successful in loading the kernel headers.  I have tried adding a line to 
the sources.list file, but so far I haven't found a directory in the 
installation drive that apt doesn't complain about.

Re: Module failure on new install of Debian Bullseye

[Leslie Rhorer]

	I was able to get the 1G interface on the motherboard up, so now I have 
LAN connectoivity and apt is working.

	It is kernel 5.10.0-13-amd64

On 5/30/2022 1:08 AM, Christophe Leroy wrote:
> 
> 
> Le 30/05/2022 à 01:46, Leslie Rhorer a écrit :
>>
>>       Below is the output of dmesg after removing quite a few of what I
>> am certain are unrelated lines:
>>
>> [    0.000000] Linux version 5.10.0-13-amd64
>> (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1
>> 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian
>> 5.10.106-1 (2022-03-17)
> 
>> [    1.465675] bnx2x: disagrees about version of symbol module_layout
> 
>> [   12.075903] bnx2x: disagrees about version of symbol module_layout
> 
> 
> Those two messages means that you are trying to use modules that were
> built for a different kernel version.
> 
> As far as I can see you are using kernel 5.10
> 
> You have to use bnx2 modules for that exact kernel.
> 
> 
> Christophe

Re: Module failure on new install of Debian Bullseye

[Leslie Rhorer]

	I may have a valid module ready to load copied from an archive of the 
kernel I am using on this system.  I have placed it in

/lib/modules/5.10.0-13-amd64/kernel/drivers/net/ethernet/bnx2x/

	How do I proceed with attempting to load the driver?  Is there some way 
I can insure the system will still boot with the existing LAN intact? 
It looks like the system may try to eliminate the 1G interface when a 
module for the 10G exists, whether the 10G is working or not.

On 5/30/2022 4:50 AM, Leslie Rhorer wrote:
>      I was able to get the 1G interface on the motherboard up, so now I 
> have LAN connectoivity and apt is working.
> 
>      It is kernel 5.10.0-13-amd64
> 
> On 5/30/2022 1:08 AM, Christophe Leroy wrote:
>>
>>
>> Le 30/05/2022 à 01:46, Leslie Rhorer a écrit :
>>>
>>>       Below is the output of dmesg after removing quite a few of what I
>>> am certain are unrelated lines:
>>>
>>> [    0.000000] Linux version 5.10.0-13-amd64
>>> (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1
>>> 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian
>>> 5.10.106-1 (2022-03-17)
>>
>>> [    1.465675] bnx2x: disagrees about version of symbol module_layout
>>
>>> [   12.075903] bnx2x: disagrees about version of symbol module_layout
>>
>>
>> Those two messages means that you are trying to use modules that were
>> built for a different kernel version.
>>
>> As far as I can see you are using kernel 5.10
>>
>> You have to use bnx2 modules for that exact kernel.
>>
>>
>> Christophe

Re: Module failure on new install of Debian Bullseye

[Luis Chamberlain]

On Thu, Jun 02, 2022 at 11:00:00PM -0500, Leslie Rhorer wrote:
> 	I may have a valid module ready to load copied from an archive of the
> kernel I am using on this system.  I have placed it in

Huh? You should not be copying around modules loosely from other
kernels.

> /lib/modules/5.10.0-13-amd64/kernel/drivers/net/ethernet/bnx2x/
> 
> 	How do I proceed with attempting to load the driver?  Is there some way I
> can insure the system will still boot with the existing LAN intact? It looks
> like the system may try to eliminate the 1G interface when a module for the
> 10G exists, whether the 10G is working or not.

Sounds like you want to engage with the bnx2x developers and report
whatever it is you are seeing. But note, you should probably try a
more recent kernel.

./scripts/get_maintainer.pl -f drivers/net/ethernet/broadcom/bnx2x/
Ariel Elior <aelior@marvell.com> (supporter:BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER)
Sudarsana Kalluru <skalluru@marvell.com> (supporter:BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER)
Manish Chopra <manishc@marvell.com> (supporter:BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER)
"David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING DRIVERS)
Eric Dumazet <edumazet@google.com> (maintainer:NETWORKING DRIVERS)
Jakub Kicinski <kuba@kernel.org> (maintainer:NETWORKING DRIVERS)
Paolo Abeni <pabeni@redhat.com> (maintainer:NETWORKING DRIVERS)
netdev@vger.kernel.org (open list:BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER)
linux-kernel@vger.kernel.org (open list)

  Luis

Re: Module failure on new install of Debian Bullseye

[Leslie Rhorer]

On 6/3/2022 10:09 AM, Luis Chamberlain wrote:
> On Thu, Jun 02, 2022 at 11:00:00PM -0500, Leslie Rhorer wrote:
>> 	I may have a valid module ready to load copied from an archive of the
>> kernel I am using on this system.  I have placed it in
> 
> Huh? You should not be copying around modules loosely from other
> kernels.

	I know that.  This not from "another" kernel.  It is from an archive of 
the same kernel.  IOW, I have another machine running a 5.10.0-15-amd64 
kernel that was upgraded from 5.10.0-13-amd64, and still has the 0-13 
bnx2x driver still in the archives.

>> /lib/modules/5.10.0-13-amd64/kernel/drivers/net/ethernet/bnx2x/
>>
>> 	How do I proceed with attempting to load the driver?  Is there some way I
>> can insure the system will still boot with the existing LAN intact? It looks
>> like the system may try to eliminate the 1G interface when a module for the
>> 10G exists, whether the 10G is working or not.
> 
> Sounds like you want to engage with the bnx2x developers and report
> whatever it is you are seeing.

	I have been trying (and apparently so have others) with no success.

> But note, you should probably try a more recent kernel.

	The same problem exists there.  Indeed, I need to wipe the other server 
and reload its OS, but I will run into precisely the same issue, since 
it is the 5.10.0-13-amd64 that is on the installation DVD.  I am 
physically disabled, so having to reconfigure hardware for a reinstall 
is a real problem.

	I suppose I could upgrade the new server to 5.10.0-15-amd64, but then I 
still need to install the 5.10.0-15-amd64 driver.  No matter what, I 
need to insert the module.  When I look up the man for insmod, it says, 
"don't use insmod, let the kernel do it", or words to that effect.  So 
now, what?  One way or anotehr, I need to get this system working, and 
then I need to do the same with the other system.

Re: Module failure on new install of Debian Bullseye

[Christophe Leroy]

Le 30/05/2022 à 01:45, Leslie Rhorer a écrit :
>      If this is the wrong list, please let me know the correct one so I
> can subscribe and post there.
> 
>      Two of my servers are having bizarre problems after upgrading to
> Debian Bullseye.  After attempting numerous fixes, I decided to wipe the
> systems and do a fresh install.  I did a fresh install of he first from
> a netinst thumb drive, but the .iso does not contain the bnx2c drivers
> needed for the ASUS PEB-10G/57811-1S 10GbE SFP+ Network Adapters used by
> both systems.  I tried adding what I thought to be the correct non-free
> drivers, but I still got errors about the bnx2x drivers and the
> interface shows no carrier.  Since no carrier is detected on the
> interface, no LAN or internet access is possible.  The system is
> effectively dead, although it boots up and of course I have local
> console access.
> 
>      After several different approaches, I changed from the netinst
> image to a full non-free image.  It still would not properly load the
> bnx2x drivers.  I tried downloading all six bnx2x e1, e1h, and e2
> release 7.13.15.0 and 7.13.21.0 firmware files and adding them to the
> initram image.  It no longer complains about missing files, but it
> doesn't activate the NIC, either.  These servers are both essentially
> dead in the water until I can get this fixed.
> 
>      The only thing I spot from dmesg that seems possibly related is:
> 
> ...
> [   12.976323] r8169 0000:0b:00.0: firmware: failed to load
> rtl_nic/rtl8168f-1.fw (-2)
> [   12.976478] firmware_class: See https://wiki.debian.org/Firmware for
> information about missing firmware
> [   12.976632] r8169 0000:0b:00.0: Direct firmware load for
> rtl_nic/rtl8168f-1.fw failed with error -2
> [   12.976636] r8169 0000:0b:00.0: Unable to load firmware
> rtl_nic/rtl8168f-1.fw (-2)

Do you have that file rtl8168f-1.fw in your setup ? Is it at the correct 
place ?

By the way, this seems to be more a Debian problem than a kernel 
problem. Have you asked your question to Debian support ?

Christophe

Re: Module failure on new install of Debian Bullseye

[Leslie Rhorer]

On 5/30/2022 1:11 AM, Christophe Leroy wrote:
> 
> 
> Le 30/05/2022 à 01:45, Leslie Rhorer a écrit :
>>       If this is the wrong list, please let me know the correct one so I
>> can subscribe and post there.
>>
>>       Two of my servers are having bizarre problems after upgrading to
>> Debian Bullseye.  After attempting numerous fixes, I decided to wipe the
>> systems and do a fresh install.  I did a fresh install of he first from
>> a netinst thumb drive, but the .iso does not contain the bnx2c drivers
>> needed for the ASUS PEB-10G/57811-1S 10GbE SFP+ Network Adapters used by
>> both systems.  I tried adding what I thought to be the correct non-free
>> drivers, but I still got errors about the bnx2x drivers and the
>> interface shows no carrier.  Since no carrier is detected on the
>> interface, no LAN or internet access is possible.  The system is
>> effectively dead, although it boots up and of course I have local
>> console access.
>>
>>       After several different approaches, I changed from the netinst
>> image to a full non-free image.  It still would not properly load the
>> bnx2x drivers.  I tried downloading all six bnx2x e1, e1h, and e2
>> release 7.13.15.0 and 7.13.21.0 firmware files and adding them to the
>> initram image.  It no longer complains about missing files, but it
>> doesn't activate the NIC, either.  These servers are both essentially
>> dead in the water until I can get this fixed.
>>
>>       The only thing I spot from dmesg that seems possibly related is:
>>
>> ...
>> [   12.976323] r8169 0000:0b:00.0: firmware: failed to load
>> rtl_nic/rtl8168f-1.fw (-2)
>> [   12.976478] firmware_class: See https://wiki.debian.org/Firmware for
>> information about missing firmware
>> [   12.976632] r8169 0000:0b:00.0: Direct firmware load for
>> rtl_nic/rtl8168f-1.fw failed with error -2
>> [   12.976636] r8169 0000:0b:00.0: Unable to load firmware
>> rtl_nic/rtl8168f-1.fw (-2)
> 
> Do you have that file rtl8168f-1.fw in your setup ? Is it at the correct
> place ?

	I will check.  Without remote LAN support, it isn't very easy.
> 
> By the way, this seems to be more a Debian problem than a kernel
> problem. Have you asked your question to Debian support ?

	They and I do not get along.  More importantly, while at first glance 
this might seem to be the case, I don't think it is. The github 
repository at

git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/bnx2x/

	Is not a Debian thing.  It is a kernel module thing for all distros. 
It is from there I downloaded the firmware (after it failed to load 
during install), and it is that which is failing.  As I said, it could 
possibly be the realtek drivers also need to be loaded, and they are 
not, but I really would not expect it to be the case.