From: Andrew Lunn <andrew@lunn.ch> To: mturquette@linaro.org Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>, Andrew Lunn <andrew@lunn.ch>, Jason Cooper <jason@lakedaemon.net>, devicetree-discuss@lists.ozlabs.org, Gregory Clement <gregory.clement@free-electrons.com>, linux ARM <linux-arm-kernel@lists.infradead.org>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Subject: [PATCH 1/7] clk: mvebu: add mvebu core clocks. Date: Thu, 15 Nov 2012 22:28:20 +0100 [thread overview] Message-ID: <1353014906-31566-2-git-send-email-andrew@lunn.ch> (raw) In-Reply-To: <1353014906-31566-1-git-send-email-andrew@lunn.ch> From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> This driver allows to provide DT clocks for core clocks found on Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and ratios are determined by decoding the Sample-At-Reset registers. Although technically correct, using a divider of 0 will lead to div_by_zero panic. Let's use a ratio of 0/1 instead to fail later with a zero clock. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- .../devicetree/bindings/clock/mvebu-core-clock.txt | 47 ++ drivers/clk/Kconfig | 2 + drivers/clk/Makefile | 1 + drivers/clk/mvebu/Kconfig | 3 + drivers/clk/mvebu/Makefile | 1 + drivers/clk/mvebu/clk-core.c | 675 ++++++++++++++++++++ drivers/clk/mvebu/clk-core.h | 18 + drivers/clk/mvebu/clk.c | 23 + include/linux/clk/mvebu.h | 22 + 9 files changed, 792 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/mvebu-core-clock.txt create mode 100644 drivers/clk/mvebu/Kconfig create mode 100644 drivers/clk/mvebu/Makefile create mode 100644 drivers/clk/mvebu/clk-core.c create mode 100644 drivers/clk/mvebu/clk-core.h create mode 100644 drivers/clk/mvebu/clk.c create mode 100644 include/linux/clk/mvebu.h diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt new file mode 100644 index 0000000..84cfae7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -0,0 +1,47 @@ +* Core Clock bindings for Marvell MVEBU SoCs + +Marvell MVEBU SoCs usually allow to determine core clock frequencies by +reading the Sample-At-Reset (SAR) register. The core clock consumer should +specify the desired clock by having the clock ID in its "clocks" phandle cell. + +The following is a list of provided IDs and clock names on Kirkwood and Dove: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = l2clk (L2 Cache clock derived from CPU0 clock) + 3 = ddrclk (DDR controller clock derived from CPU0 clock) + +The following is a list of provided IDs and clock names on 370/XP: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (L2 Cache clock) + 3 = hclk (DRAM control clock) + 4 = dramclk (DDR clock) + +Required properties: +- compatible : shall be one of the following: + "marvell,dove-core-clocks" - for Dove SoC core clocks + "marvell,kirkwood-core-clocks" - for Kirkwood SoC (except mv88f6180) + "marvell,mv88f6180-core-clocks" - for Kirkwood MV88f6180 SoC + "marvell,370-core-clocks" - For 370 SoC core clocks + "marvell,xp-core-clocks" - For XP SoC core clocks +- reg : shall be the register address of the Sample-At-Reset (SAR) register +- #clock-cells : from common clock binding; shall be set to 1 + +Optional properties: +- clock-output-names : from common clock binding; allows overwrite default clock + output names ("tclk", "cpuclk", "l2clk", "ddrclk") + +Example: + +core_clk: core-clocks@d0214 { + compatible = "marvell,dove-core-clocks"; + reg = <0xd0214 0x4>; + #clock-cells = <1>; +}; + +spi0: spi@10600 { + compatible = "marvell,orion-spi"; + /* ... */ + /* get tclk from core clock provider */ + clocks = <&core_clk 0>; +}; diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index bace9e9..60427c0 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -54,3 +54,5 @@ config COMMON_CLK_MAX77686 This driver supports Maxim 77686 crystal oscillator clock. endmenu + +source "drivers/clk/mvebu/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b9..d0a14ae 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o +obj-$(CONFIG_PLAT_ORION) += mvebu/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig new file mode 100644 index 0000000..fd7bf97 --- /dev/null +++ b/drivers/clk/mvebu/Kconfig @@ -0,0 +1,3 @@ +config MVEBU_CLK_CORE + bool + diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile new file mode 100644 index 0000000..de1d961 --- /dev/null +++ b/drivers/clk/mvebu/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c new file mode 100644 index 0000000..26ba835 --- /dev/null +++ b/drivers/clk/mvebu/clk-core.c @@ -0,0 +1,675 @@ +/* + * Marvell EBU clock core handling defined at reset + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/of.h> +#include "clk-core.h" + +struct core_ratio { + int id; + const char *name; +}; + +struct core_clocks { + u32 (*get_tclk_freq)(void __iomem *sar); + u32 (*get_cpu_freq)(void __iomem *sar); + void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); + const struct core_ratio *ratios; + int num_ratios; +}; + +static struct clk_onecell_data clk_data; + +static void __init mvebu_clk_core_setup(struct device_node *np, + struct core_clocks *coreclk) +{ + const char *tclk_name = "tclk"; + const char *cpuclk_name = "cpuclk"; + void __iomem *base; + unsigned long rate; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* + * Allocate struct for TCLK, cpu clk, and core ratio clocks + */ + clk_data.clk_num = 2 + coreclk->num_ratios; + clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!clk_data.clks)) + return; + + /* + * Register TCLK + */ + of_property_read_string_index(np, "clock-output-names", 0, + &tclk_name); + rate = coreclk->get_tclk_freq(base); + clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[0])); + + /* + * Register CPU clock + */ + of_property_read_string_index(np, "clock-output-names", 1, + &cpuclk_name); + rate = coreclk->get_cpu_freq(base); + clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[1])); + + /* + * Register fixed-factor clocks derived from CPU clock + */ + for (n = 0; n < coreclk->num_ratios; n++) { + const char *rclk_name = coreclk->ratios[n].name; + int mult, div; + + of_property_read_string_index(np, "clock-output-names", + 2+n, &rclk_name); + coreclk->get_clk_ratio(base, coreclk->ratios[n].id, + &mult, &div); + clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, + cpuclk_name, 0, mult, div); + WARN_ON(IS_ERR(clk_data.clks[2+n])); + }; + + /* + * SAR register isn't needed anymore + */ + iounmap(base); + + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +#ifdef CONFIG_MACH_ARMADA_370_XP +/* + * 370/XP Sample At Reset is a 64 bit bitfiled split in two register + * of 32 bits + */ + +#define SARL 0 /* Low part [0:31] */ +#define SARL_AXP_PCLK_FREQ_OPT 21 +#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7 +#define SARL_A370_PCLK_FREQ_OPT 11 +#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF +#define SARL_AXP_FAB_FREQ_OPT 24 +#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF +#define SARL_A370_FAB_FREQ_OPT 15 +#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F +#define SARL_A370_TCLK_FREQ_OPT 20 +#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1 +#define SARH 4 /* High part [32:63] */ +#define SARH_AXP_PCLK_FREQ_OPT (52-32) +#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1 +#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3 +#define SARH_AXP_FAB_FREQ_OPT (51-32) +#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1 +#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4 + +static const u32 __initconst a370_tclk_frequencies[] = { + 16600000, + 20000000, +}; + +static u32 __init a370_get_tclk_freq(void __iomem *sar) +{ + u8 tclk_freq_select = 0; + + tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) & + SARL_A370_TCLK_FREQ_OPT_MASK); + return a370_tclk_frequencies[tclk_freq_select]; +} + +static const u32 __initconst a370_cpu_frequencies[] = { + 400000000, + 533000000, + 667000000, + 800000000, + 1000000000, + 1067000000, + 1200000000, +}; + +static u32 __init a370_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) & + SARL_A370_PCLK_FREQ_OPT_MASK); + if (cpu_freq_select > ARRAY_SIZE(a370_cpu_frequencies)) { + pr_err("CPU freq select unsuported %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = a370_cpu_frequencies[cpu_freq_select]; + + return cpu_freq; +} + +enum { A370_XP_NBCLK, A370_XP_HCLK, A370_XP_DRAMCLK }; + +static const struct core_ratio __initconst a370_xp_core_ratios[] = { + { .id = A370_XP_NBCLK, .name = "nbclk" }, + { .id = A370_XP_HCLK, .name = "hclk" }, + { .id = A370_XP_DRAMCLK, .name = "dramclk" }, +}; + +static const int __initconst a370_xp_nbclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 2}, {2, 2}, + {1, 2}, {1, 2}, {1, 1}, {2, 3}, + {0, 1}, {1, 2}, {2, 4}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {2, 2}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_xp_hclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 6}, {2, 3}, + {1, 3}, {1, 4}, {1, 2}, {2, 6}, + {0, 1}, {1, 6}, {2, 10}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 2}, + {2, 6}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_xp_dramclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 3}, {2, 3}, + {1, 3}, {1, 2}, {1, 2}, {2, 6}, + {0, 1}, {1, 3}, {2, 5}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static void __init a370_xp_get_clk_ratio(u32 opt, + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case A370_XP_NBCLK: + *mult = a370_xp_nbclk_ratios[opt][0]; + *div = a370_xp_nbclk_ratios[opt][1]; + break; + case A370_XP_HCLK: + *mult = a370_xp_hclk_ratios[opt][0]; + *div = a370_xp_hclk_ratios[opt][1]; + break; + case A370_XP_DRAMCLK: + *mult = a370_xp_dramclk_ratios[opt][0]; + *div = a370_xp_dramclk_ratios[opt][1]; + break; + } +} + +static void __init a370_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) & + SARL_A370_FAB_FREQ_OPT_MASK); + + a370_xp_get_clk_ratio(opt, sar, id, mult, div); +} + + +static const struct core_clocks a370_core_clocks = { + .get_tclk_freq = a370_get_tclk_freq, + .get_cpu_freq = a370_get_cpu_freq, + .get_clk_ratio = a370_get_clk_ratio, + .ratios = a370_xp_core_ratios, + .num_ratios = ARRAY_SIZE(a370_xp_core_ratios), +}; + +static const u32 __initconst xp_cpu_frequencies[] = { + 1000000000, + 1066000000, + 1200000000, + 1333000000, + 1500000000, + 1666000000, + 1800000000, + 2000000000, + 667000000, + 0, + 800000000, + 1600000000, +}; + +/* For Armada XP TCLK frequency is fix: 250MHz */ +static u32 __init xp_get_tclk_freq(void __iomem *sar) +{ + return 250 * 1000 * 1000; +} + +static u32 __init xp_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_AXP_PCLK_FREQ_OPT) & + SARL_AXP_PCLK_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + cpu_freq_select |= (((readl(sar+4) >> SARH_AXP_PCLK_FREQ_OPT) & + SARH_AXP_PCLK_FREQ_OPT_MASK) + << SARH_AXP_PCLK_FREQ_OPT_SHIFT); + if (cpu_freq_select > ARRAY_SIZE(xp_cpu_frequencies)) { + pr_err("CPU freq select unsuported: %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = xp_cpu_frequencies[cpu_freq_select]; + + return cpu_freq; +} + +static void __init xp_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + + u32 opt = ((readl(sar) >> SARL_AXP_FAB_FREQ_OPT) & + SARL_AXP_FAB_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + opt |= (((readl(sar+4) >> SARH_AXP_FAB_FREQ_OPT) & + SARH_AXP_FAB_FREQ_OPT_MASK) + << SARH_AXP_FAB_FREQ_OPT_SHIFT); + + a370_xp_get_clk_ratio(opt, sar, id, mult, div); +} + +static const struct core_clocks xp_core_clocks = { + .get_tclk_freq = xp_get_tclk_freq, + .get_cpu_freq = xp_get_cpu_freq, + .get_clk_ratio = xp_get_clk_ratio, + .ratios = a370_xp_core_ratios, + .num_ratios = ARRAY_SIZE(a370_xp_core_ratios), +}; + +#endif /* CONFIG_MACH_ARMADA_370_XP */ + +/* + * Dove PLL sample-at-reset configuration + * + * SAR0[8:5] : CPU frequency + * 5 = 1000 MHz + * 6 = 933 MHz + * 7 = 933 MHz + * 8 = 800 MHz + * 9 = 800 MHz + * 10 = 800 MHz + * 11 = 1067 MHz + * 12 = 667 MHz + * 13 = 533 MHz + * 14 = 400 MHz + * 15 = 333 MHz + * others reserved. + * + * SAR0[11:9] : CPU to L2 Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * others reserved. + * + * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 3 = (2/5) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 8 = (1/5) * CPU + * 10 = (1/6) * CPU + * 12 = (1/7) * CPU + * 14 = (1/8) * CPU + * 15 = (1/10) * CPU + * others reserved. + * + * SAR0[24:23] : TCLK frequency + * 0 = 166 MHz + * 1 = 125 MHz + * others reserved. + */ +#ifdef CONFIG_ARCH_DOVE +#define SAR_DOVE_CPU_FREQ 5 +#define SAR_DOVE_CPU_FREQ_MASK 0xf +#define SAR_DOVE_L2_RATIO 9 +#define SAR_DOVE_L2_RATIO_MASK 0x7 +#define SAR_DOVE_DDR_RATIO 12 +#define SAR_DOVE_DDR_RATIO_MASK 0xf +#define SAR_DOVE_TCLK_FREQ 23 +#define SAR_DOVE_TCLK_FREQ_MASK 0x3 + +static const u32 __initconst dove_tclk_frequencies[] = { + 166666667, + 125000000, + 0, 0 +}; + +static u32 __init dove_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) & + SAR_DOVE_TCLK_FREQ_MASK; + return dove_tclk_frequencies[opt]; +} + +static const u32 __initconst dove_cpu_frequencies[] = { + 0, 0, 0, 0, 0, + 1000000000, + 933333333, 933333333, + 800000000, 800000000, 800000000, + 1066666667, + 666666667, + 533333333, + 400000000, + 333333333 +}; + +static u32 __init dove_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) & + SAR_DOVE_CPU_FREQ_MASK; + return dove_cpu_frequencies[opt]; +} + +enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR }; + +static const struct core_ratio __initconst dove_core_ratios[] = { + { .id = DOVE_CPU_TO_L2, .name = "l2clk", }, + { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", } +}; + +static const int __initconst dove_cpu_l2_ratios[8][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 } +}; + +static const int __initconst dove_cpu_ddr_ratios[16][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }, + { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 }, + { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 } +}; + +static void __init dove_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case DOVE_CPU_TO_L2: + { + u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) & + SAR_DOVE_L2_RATIO_MASK; + *mult = dove_cpu_l2_ratios[opt][0]; + *div = dove_cpu_l2_ratios[opt][1]; + break; + } + case DOVE_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) & + SAR_DOVE_DDR_RATIO_MASK; + *mult = dove_cpu_ddr_ratios[opt][0]; + *div = dove_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks dove_core_clocks = { + .get_tclk_freq = dove_get_tclk_freq, + .get_cpu_freq = dove_get_cpu_freq, + .get_clk_ratio = dove_get_clk_ratio, + .ratios = dove_core_ratios, + .num_ratios = ARRAY_SIZE(dove_core_ratios), +}; +#endif /* CONFIG_ARCH_DOVE */ + +/* + * Kirkwood PLL sample-at-reset configuration + * (6180 has different SAR layout than other Kirkwood SoCs) + * + * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282) + * 4 = 600 MHz + * 6 = 800 MHz + * 7 = 1000 MHz + * 9 = 1200 MHz + * 12 = 1500 MHz + * 13 = 1600 MHz + * 14 = 1800 MHz + * 15 = 2000 MHz + * others reserved. + * + * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282) + * 1 = (1/2) * CPU + * 3 = (1/3) * CPU + * 5 = (1/4) * CPU + * others reserved. + * + * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282) + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 7 = (2/9) * CPU + * 8 = (1/5) * CPU + * 9 = (1/6) * CPU + * others reserved. + * + * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only) + * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU] + * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU] + * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU] + * others reserved. + * + * SAR0[21] : TCLK frequency + * 0 = 200 MHz + * 1 = 166 MHz + * others reserved. + */ +#ifdef CONFIG_ARCH_KIRKWOOD +#define SAR_KIRKWOOD_CPU_FREQ(x) \ + (((x & (1 << 1)) >> 1) | \ + ((x & (1 << 22)) >> 21) | \ + ((x & (3 << 3)) >> 1)) +#define SAR_KIRKWOOD_L2_RATIO(x) \ + (((x & (3 << 9)) >> 9) | \ + (((x & (1 << 19)) >> 17))) +#define SAR_KIRKWOOD_DDR_RATIO 5 +#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf +#define SAR_MV88F6180_CLK 2 +#define SAR_MV88F6180_CLK_MASK 0x7 +#define SAR_KIRKWOOD_TCLK_FREQ 21 +#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1 + +enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR }; + +static const struct core_ratio __initconst kirkwood_core_ratios[] = { + { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", }, + { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", } +}; + +static u32 __init kirkwood_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) & + SAR_KIRKWOOD_TCLK_FREQ_MASK; + return (opt) ? 166666667 : 200000000; +} + +static const u32 __initconst kirkwood_cpu_frequencies[] = { + 0, 0, 0, 0, + 600000000, + 0, + 800000000, + 1000000000, + 0, + 1200000000, + 0, 0, + 1500000000, + 1600000000, + 1800000000, + 2000000000 +}; + +static u32 __init kirkwood_get_cpu_freq(void __iomem *sar) +{ + u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar)); + return kirkwood_cpu_frequencies[opt]; +} + +static const int __initconst kirkwood_cpu_l2_ratios[8][2] = { + { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 }, + { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 } +}; + +static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = { + { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 }, + { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 } +}; + +static void __init kirkwood_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar)); + *mult = kirkwood_cpu_l2_ratios[opt][0]; + *div = kirkwood_cpu_l2_ratios[opt][1]; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) & + SAR_KIRKWOOD_DDR_RATIO_MASK; + *mult = kirkwood_cpu_ddr_ratios[opt][0]; + *div = kirkwood_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks kirkwood_core_clocks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = kirkwood_get_cpu_freq, + .get_clk_ratio = kirkwood_get_clk_ratio, + .ratios = kirkwood_core_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), +}; + +static const u32 __initconst mv88f6180_cpu_frequencies[] = { + 0, 0, 0, 0, 0, + 600000000, + 800000000, + 1000000000 +}; + +static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK; + return mv88f6180_cpu_frequencies[opt]; +} + +static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = { + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 } +}; + +static void __init mv88f6180_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */ + *mult = 1; + *div = 2; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & + SAR_MV88F6180_CLK_MASK; + *mult = mv88f6180_cpu_ddr_ratios[opt][0]; + *div = mv88f6180_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks mv88f6180_core_clocks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = mv88f6180_get_cpu_freq, + .get_clk_ratio = mv88f6180_get_clk_ratio, + .ratios = kirkwood_core_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), +}; +#endif /* CONFIG_ARCH_KIRKWOOD */ + +static const __initdata struct of_device_id clk_core_match[] = { +#ifdef CONFIG_MACH_ARMADA_370_XP + { + .compatible = "marvell,370-core-clocks", + .data = &a370_core_clocks, + }, + { + .compatible = "marvell,xp-core-clocks", + .data = &xp_core_clocks, + }, +#endif +#ifdef CONFIG_ARCH_DOVE + { + .compatible = "marvell,dove-core-clocks", + .data = &dove_core_clocks, + }, +#endif + +#ifdef CONFIG_ARCH_KIRKWOOD + { + .compatible = "marvell,kirkwood-core-clocks", + .data = &kirkwood_core_clocks, + }, + { + .compatible = "marvell,mv88f6180-core-clocks", + .data = &mv88f6180_core_clocks, + }, +#endif + + { } +}; + +void __init mvebu_core_clk_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, clk_core_match) { + const struct of_device_id *match = + of_match_node(clk_core_match, np); + mvebu_clk_core_setup(np, (struct core_clocks *)match->data); + } +} diff --git a/drivers/clk/mvebu/clk-core.h b/drivers/clk/mvebu/clk-core.h new file mode 100644 index 0000000..28b5e02 --- /dev/null +++ b/drivers/clk/mvebu/clk-core.h @@ -0,0 +1,18 @@ +/* + * * Marvell EBU clock core handling defined at reset + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MVEBU_CLK_CORE_H +#define __MVEBU_CLK_CORE_H + +void __init mvebu_core_clk_init(void); + +#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c new file mode 100644 index 0000000..e6742ac --- /dev/null +++ b/drivers/clk/mvebu/clk.c @@ -0,0 +1,23 @@ +/* + * Marvell EBU SoC clock handling. + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/clk/mvebu.h> +#include <linux/of.h> +#include "clk-core.h" + +void __init mvebu_clocks_init(void) +{ + mvebu_core_clk_init(); +} diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h new file mode 100644 index 0000000..8c4ae71 --- /dev/null +++ b/include/linux/clk/mvebu.h @@ -0,0 +1,22 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __CLK_MVEBU_H_ +#define __CLK_MVEBU_H_ + +void __init mvebu_clocks_init(void); + +#endif -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: andrew@lunn.ch (Andrew Lunn) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/7] clk: mvebu: add mvebu core clocks. Date: Thu, 15 Nov 2012 22:28:20 +0100 [thread overview] Message-ID: <1353014906-31566-2-git-send-email-andrew@lunn.ch> (raw) In-Reply-To: <1353014906-31566-1-git-send-email-andrew@lunn.ch> From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> This driver allows to provide DT clocks for core clocks found on Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and ratios are determined by decoding the Sample-At-Reset registers. Although technically correct, using a divider of 0 will lead to div_by_zero panic. Let's use a ratio of 0/1 instead to fail later with a zero clock. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- .../devicetree/bindings/clock/mvebu-core-clock.txt | 47 ++ drivers/clk/Kconfig | 2 + drivers/clk/Makefile | 1 + drivers/clk/mvebu/Kconfig | 3 + drivers/clk/mvebu/Makefile | 1 + drivers/clk/mvebu/clk-core.c | 675 ++++++++++++++++++++ drivers/clk/mvebu/clk-core.h | 18 + drivers/clk/mvebu/clk.c | 23 + include/linux/clk/mvebu.h | 22 + 9 files changed, 792 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/mvebu-core-clock.txt create mode 100644 drivers/clk/mvebu/Kconfig create mode 100644 drivers/clk/mvebu/Makefile create mode 100644 drivers/clk/mvebu/clk-core.c create mode 100644 drivers/clk/mvebu/clk-core.h create mode 100644 drivers/clk/mvebu/clk.c create mode 100644 include/linux/clk/mvebu.h diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt new file mode 100644 index 0000000..84cfae7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -0,0 +1,47 @@ +* Core Clock bindings for Marvell MVEBU SoCs + +Marvell MVEBU SoCs usually allow to determine core clock frequencies by +reading the Sample-At-Reset (SAR) register. The core clock consumer should +specify the desired clock by having the clock ID in its "clocks" phandle cell. + +The following is a list of provided IDs and clock names on Kirkwood and Dove: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = l2clk (L2 Cache clock derived from CPU0 clock) + 3 = ddrclk (DDR controller clock derived from CPU0 clock) + +The following is a list of provided IDs and clock names on 370/XP: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (L2 Cache clock) + 3 = hclk (DRAM control clock) + 4 = dramclk (DDR clock) + +Required properties: +- compatible : shall be one of the following: + "marvell,dove-core-clocks" - for Dove SoC core clocks + "marvell,kirkwood-core-clocks" - for Kirkwood SoC (except mv88f6180) + "marvell,mv88f6180-core-clocks" - for Kirkwood MV88f6180 SoC + "marvell,370-core-clocks" - For 370 SoC core clocks + "marvell,xp-core-clocks" - For XP SoC core clocks +- reg : shall be the register address of the Sample-At-Reset (SAR) register +- #clock-cells : from common clock binding; shall be set to 1 + +Optional properties: +- clock-output-names : from common clock binding; allows overwrite default clock + output names ("tclk", "cpuclk", "l2clk", "ddrclk") + +Example: + +core_clk: core-clocks at d0214 { + compatible = "marvell,dove-core-clocks"; + reg = <0xd0214 0x4>; + #clock-cells = <1>; +}; + +spi0: spi at 10600 { + compatible = "marvell,orion-spi"; + /* ... */ + /* get tclk from core clock provider */ + clocks = <&core_clk 0>; +}; diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index bace9e9..60427c0 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -54,3 +54,5 @@ config COMMON_CLK_MAX77686 This driver supports Maxim 77686 crystal oscillator clock. endmenu + +source "drivers/clk/mvebu/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b9..d0a14ae 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o +obj-$(CONFIG_PLAT_ORION) += mvebu/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig new file mode 100644 index 0000000..fd7bf97 --- /dev/null +++ b/drivers/clk/mvebu/Kconfig @@ -0,0 +1,3 @@ +config MVEBU_CLK_CORE + bool + diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile new file mode 100644 index 0000000..de1d961 --- /dev/null +++ b/drivers/clk/mvebu/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c new file mode 100644 index 0000000..26ba835 --- /dev/null +++ b/drivers/clk/mvebu/clk-core.c @@ -0,0 +1,675 @@ +/* + * Marvell EBU clock core handling defined at reset + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/of.h> +#include "clk-core.h" + +struct core_ratio { + int id; + const char *name; +}; + +struct core_clocks { + u32 (*get_tclk_freq)(void __iomem *sar); + u32 (*get_cpu_freq)(void __iomem *sar); + void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); + const struct core_ratio *ratios; + int num_ratios; +}; + +static struct clk_onecell_data clk_data; + +static void __init mvebu_clk_core_setup(struct device_node *np, + struct core_clocks *coreclk) +{ + const char *tclk_name = "tclk"; + const char *cpuclk_name = "cpuclk"; + void __iomem *base; + unsigned long rate; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* + * Allocate struct for TCLK, cpu clk, and core ratio clocks + */ + clk_data.clk_num = 2 + coreclk->num_ratios; + clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!clk_data.clks)) + return; + + /* + * Register TCLK + */ + of_property_read_string_index(np, "clock-output-names", 0, + &tclk_name); + rate = coreclk->get_tclk_freq(base); + clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[0])); + + /* + * Register CPU clock + */ + of_property_read_string_index(np, "clock-output-names", 1, + &cpuclk_name); + rate = coreclk->get_cpu_freq(base); + clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[1])); + + /* + * Register fixed-factor clocks derived from CPU clock + */ + for (n = 0; n < coreclk->num_ratios; n++) { + const char *rclk_name = coreclk->ratios[n].name; + int mult, div; + + of_property_read_string_index(np, "clock-output-names", + 2+n, &rclk_name); + coreclk->get_clk_ratio(base, coreclk->ratios[n].id, + &mult, &div); + clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, + cpuclk_name, 0, mult, div); + WARN_ON(IS_ERR(clk_data.clks[2+n])); + }; + + /* + * SAR register isn't needed anymore + */ + iounmap(base); + + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +#ifdef CONFIG_MACH_ARMADA_370_XP +/* + * 370/XP Sample At Reset is a 64 bit bitfiled split in two register + * of 32 bits + */ + +#define SARL 0 /* Low part [0:31] */ +#define SARL_AXP_PCLK_FREQ_OPT 21 +#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7 +#define SARL_A370_PCLK_FREQ_OPT 11 +#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF +#define SARL_AXP_FAB_FREQ_OPT 24 +#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF +#define SARL_A370_FAB_FREQ_OPT 15 +#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F +#define SARL_A370_TCLK_FREQ_OPT 20 +#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1 +#define SARH 4 /* High part [32:63] */ +#define SARH_AXP_PCLK_FREQ_OPT (52-32) +#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1 +#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3 +#define SARH_AXP_FAB_FREQ_OPT (51-32) +#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1 +#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4 + +static const u32 __initconst a370_tclk_frequencies[] = { + 16600000, + 20000000, +}; + +static u32 __init a370_get_tclk_freq(void __iomem *sar) +{ + u8 tclk_freq_select = 0; + + tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) & + SARL_A370_TCLK_FREQ_OPT_MASK); + return a370_tclk_frequencies[tclk_freq_select]; +} + +static const u32 __initconst a370_cpu_frequencies[] = { + 400000000, + 533000000, + 667000000, + 800000000, + 1000000000, + 1067000000, + 1200000000, +}; + +static u32 __init a370_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) & + SARL_A370_PCLK_FREQ_OPT_MASK); + if (cpu_freq_select > ARRAY_SIZE(a370_cpu_frequencies)) { + pr_err("CPU freq select unsuported %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = a370_cpu_frequencies[cpu_freq_select]; + + return cpu_freq; +} + +enum { A370_XP_NBCLK, A370_XP_HCLK, A370_XP_DRAMCLK }; + +static const struct core_ratio __initconst a370_xp_core_ratios[] = { + { .id = A370_XP_NBCLK, .name = "nbclk" }, + { .id = A370_XP_HCLK, .name = "hclk" }, + { .id = A370_XP_DRAMCLK, .name = "dramclk" }, +}; + +static const int __initconst a370_xp_nbclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 2}, {2, 2}, + {1, 2}, {1, 2}, {1, 1}, {2, 3}, + {0, 1}, {1, 2}, {2, 4}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {2, 2}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_xp_hclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 6}, {2, 3}, + {1, 3}, {1, 4}, {1, 2}, {2, 6}, + {0, 1}, {1, 6}, {2, 10}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 2}, + {2, 6}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_xp_dramclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 3}, {2, 3}, + {1, 3}, {1, 2}, {1, 2}, {2, 6}, + {0, 1}, {1, 3}, {2, 5}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static void __init a370_xp_get_clk_ratio(u32 opt, + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case A370_XP_NBCLK: + *mult = a370_xp_nbclk_ratios[opt][0]; + *div = a370_xp_nbclk_ratios[opt][1]; + break; + case A370_XP_HCLK: + *mult = a370_xp_hclk_ratios[opt][0]; + *div = a370_xp_hclk_ratios[opt][1]; + break; + case A370_XP_DRAMCLK: + *mult = a370_xp_dramclk_ratios[opt][0]; + *div = a370_xp_dramclk_ratios[opt][1]; + break; + } +} + +static void __init a370_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) & + SARL_A370_FAB_FREQ_OPT_MASK); + + a370_xp_get_clk_ratio(opt, sar, id, mult, div); +} + + +static const struct core_clocks a370_core_clocks = { + .get_tclk_freq = a370_get_tclk_freq, + .get_cpu_freq = a370_get_cpu_freq, + .get_clk_ratio = a370_get_clk_ratio, + .ratios = a370_xp_core_ratios, + .num_ratios = ARRAY_SIZE(a370_xp_core_ratios), +}; + +static const u32 __initconst xp_cpu_frequencies[] = { + 1000000000, + 1066000000, + 1200000000, + 1333000000, + 1500000000, + 1666000000, + 1800000000, + 2000000000, + 667000000, + 0, + 800000000, + 1600000000, +}; + +/* For Armada XP TCLK frequency is fix: 250MHz */ +static u32 __init xp_get_tclk_freq(void __iomem *sar) +{ + return 250 * 1000 * 1000; +} + +static u32 __init xp_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_AXP_PCLK_FREQ_OPT) & + SARL_AXP_PCLK_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + cpu_freq_select |= (((readl(sar+4) >> SARH_AXP_PCLK_FREQ_OPT) & + SARH_AXP_PCLK_FREQ_OPT_MASK) + << SARH_AXP_PCLK_FREQ_OPT_SHIFT); + if (cpu_freq_select > ARRAY_SIZE(xp_cpu_frequencies)) { + pr_err("CPU freq select unsuported: %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = xp_cpu_frequencies[cpu_freq_select]; + + return cpu_freq; +} + +static void __init xp_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + + u32 opt = ((readl(sar) >> SARL_AXP_FAB_FREQ_OPT) & + SARL_AXP_FAB_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + opt |= (((readl(sar+4) >> SARH_AXP_FAB_FREQ_OPT) & + SARH_AXP_FAB_FREQ_OPT_MASK) + << SARH_AXP_FAB_FREQ_OPT_SHIFT); + + a370_xp_get_clk_ratio(opt, sar, id, mult, div); +} + +static const struct core_clocks xp_core_clocks = { + .get_tclk_freq = xp_get_tclk_freq, + .get_cpu_freq = xp_get_cpu_freq, + .get_clk_ratio = xp_get_clk_ratio, + .ratios = a370_xp_core_ratios, + .num_ratios = ARRAY_SIZE(a370_xp_core_ratios), +}; + +#endif /* CONFIG_MACH_ARMADA_370_XP */ + +/* + * Dove PLL sample-at-reset configuration + * + * SAR0[8:5] : CPU frequency + * 5 = 1000 MHz + * 6 = 933 MHz + * 7 = 933 MHz + * 8 = 800 MHz + * 9 = 800 MHz + * 10 = 800 MHz + * 11 = 1067 MHz + * 12 = 667 MHz + * 13 = 533 MHz + * 14 = 400 MHz + * 15 = 333 MHz + * others reserved. + * + * SAR0[11:9] : CPU to L2 Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * others reserved. + * + * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 3 = (2/5) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 8 = (1/5) * CPU + * 10 = (1/6) * CPU + * 12 = (1/7) * CPU + * 14 = (1/8) * CPU + * 15 = (1/10) * CPU + * others reserved. + * + * SAR0[24:23] : TCLK frequency + * 0 = 166 MHz + * 1 = 125 MHz + * others reserved. + */ +#ifdef CONFIG_ARCH_DOVE +#define SAR_DOVE_CPU_FREQ 5 +#define SAR_DOVE_CPU_FREQ_MASK 0xf +#define SAR_DOVE_L2_RATIO 9 +#define SAR_DOVE_L2_RATIO_MASK 0x7 +#define SAR_DOVE_DDR_RATIO 12 +#define SAR_DOVE_DDR_RATIO_MASK 0xf +#define SAR_DOVE_TCLK_FREQ 23 +#define SAR_DOVE_TCLK_FREQ_MASK 0x3 + +static const u32 __initconst dove_tclk_frequencies[] = { + 166666667, + 125000000, + 0, 0 +}; + +static u32 __init dove_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) & + SAR_DOVE_TCLK_FREQ_MASK; + return dove_tclk_frequencies[opt]; +} + +static const u32 __initconst dove_cpu_frequencies[] = { + 0, 0, 0, 0, 0, + 1000000000, + 933333333, 933333333, + 800000000, 800000000, 800000000, + 1066666667, + 666666667, + 533333333, + 400000000, + 333333333 +}; + +static u32 __init dove_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) & + SAR_DOVE_CPU_FREQ_MASK; + return dove_cpu_frequencies[opt]; +} + +enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR }; + +static const struct core_ratio __initconst dove_core_ratios[] = { + { .id = DOVE_CPU_TO_L2, .name = "l2clk", }, + { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", } +}; + +static const int __initconst dove_cpu_l2_ratios[8][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 } +}; + +static const int __initconst dove_cpu_ddr_ratios[16][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }, + { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 }, + { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 } +}; + +static void __init dove_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case DOVE_CPU_TO_L2: + { + u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) & + SAR_DOVE_L2_RATIO_MASK; + *mult = dove_cpu_l2_ratios[opt][0]; + *div = dove_cpu_l2_ratios[opt][1]; + break; + } + case DOVE_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) & + SAR_DOVE_DDR_RATIO_MASK; + *mult = dove_cpu_ddr_ratios[opt][0]; + *div = dove_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks dove_core_clocks = { + .get_tclk_freq = dove_get_tclk_freq, + .get_cpu_freq = dove_get_cpu_freq, + .get_clk_ratio = dove_get_clk_ratio, + .ratios = dove_core_ratios, + .num_ratios = ARRAY_SIZE(dove_core_ratios), +}; +#endif /* CONFIG_ARCH_DOVE */ + +/* + * Kirkwood PLL sample-at-reset configuration + * (6180 has different SAR layout than other Kirkwood SoCs) + * + * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282) + * 4 = 600 MHz + * 6 = 800 MHz + * 7 = 1000 MHz + * 9 = 1200 MHz + * 12 = 1500 MHz + * 13 = 1600 MHz + * 14 = 1800 MHz + * 15 = 2000 MHz + * others reserved. + * + * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282) + * 1 = (1/2) * CPU + * 3 = (1/3) * CPU + * 5 = (1/4) * CPU + * others reserved. + * + * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282) + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 7 = (2/9) * CPU + * 8 = (1/5) * CPU + * 9 = (1/6) * CPU + * others reserved. + * + * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only) + * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU] + * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU] + * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU] + * others reserved. + * + * SAR0[21] : TCLK frequency + * 0 = 200 MHz + * 1 = 166 MHz + * others reserved. + */ +#ifdef CONFIG_ARCH_KIRKWOOD +#define SAR_KIRKWOOD_CPU_FREQ(x) \ + (((x & (1 << 1)) >> 1) | \ + ((x & (1 << 22)) >> 21) | \ + ((x & (3 << 3)) >> 1)) +#define SAR_KIRKWOOD_L2_RATIO(x) \ + (((x & (3 << 9)) >> 9) | \ + (((x & (1 << 19)) >> 17))) +#define SAR_KIRKWOOD_DDR_RATIO 5 +#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf +#define SAR_MV88F6180_CLK 2 +#define SAR_MV88F6180_CLK_MASK 0x7 +#define SAR_KIRKWOOD_TCLK_FREQ 21 +#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1 + +enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR }; + +static const struct core_ratio __initconst kirkwood_core_ratios[] = { + { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", }, + { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", } +}; + +static u32 __init kirkwood_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) & + SAR_KIRKWOOD_TCLK_FREQ_MASK; + return (opt) ? 166666667 : 200000000; +} + +static const u32 __initconst kirkwood_cpu_frequencies[] = { + 0, 0, 0, 0, + 600000000, + 0, + 800000000, + 1000000000, + 0, + 1200000000, + 0, 0, + 1500000000, + 1600000000, + 1800000000, + 2000000000 +}; + +static u32 __init kirkwood_get_cpu_freq(void __iomem *sar) +{ + u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar)); + return kirkwood_cpu_frequencies[opt]; +} + +static const int __initconst kirkwood_cpu_l2_ratios[8][2] = { + { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 }, + { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 } +}; + +static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = { + { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 }, + { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 } +}; + +static void __init kirkwood_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar)); + *mult = kirkwood_cpu_l2_ratios[opt][0]; + *div = kirkwood_cpu_l2_ratios[opt][1]; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) & + SAR_KIRKWOOD_DDR_RATIO_MASK; + *mult = kirkwood_cpu_ddr_ratios[opt][0]; + *div = kirkwood_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks kirkwood_core_clocks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = kirkwood_get_cpu_freq, + .get_clk_ratio = kirkwood_get_clk_ratio, + .ratios = kirkwood_core_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), +}; + +static const u32 __initconst mv88f6180_cpu_frequencies[] = { + 0, 0, 0, 0, 0, + 600000000, + 800000000, + 1000000000 +}; + +static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK; + return mv88f6180_cpu_frequencies[opt]; +} + +static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = { + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 } +}; + +static void __init mv88f6180_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */ + *mult = 1; + *div = 2; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & + SAR_MV88F6180_CLK_MASK; + *mult = mv88f6180_cpu_ddr_ratios[opt][0]; + *div = mv88f6180_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks mv88f6180_core_clocks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = mv88f6180_get_cpu_freq, + .get_clk_ratio = mv88f6180_get_clk_ratio, + .ratios = kirkwood_core_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), +}; +#endif /* CONFIG_ARCH_KIRKWOOD */ + +static const __initdata struct of_device_id clk_core_match[] = { +#ifdef CONFIG_MACH_ARMADA_370_XP + { + .compatible = "marvell,370-core-clocks", + .data = &a370_core_clocks, + }, + { + .compatible = "marvell,xp-core-clocks", + .data = &xp_core_clocks, + }, +#endif +#ifdef CONFIG_ARCH_DOVE + { + .compatible = "marvell,dove-core-clocks", + .data = &dove_core_clocks, + }, +#endif + +#ifdef CONFIG_ARCH_KIRKWOOD + { + .compatible = "marvell,kirkwood-core-clocks", + .data = &kirkwood_core_clocks, + }, + { + .compatible = "marvell,mv88f6180-core-clocks", + .data = &mv88f6180_core_clocks, + }, +#endif + + { } +}; + +void __init mvebu_core_clk_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, clk_core_match) { + const struct of_device_id *match = + of_match_node(clk_core_match, np); + mvebu_clk_core_setup(np, (struct core_clocks *)match->data); + } +} diff --git a/drivers/clk/mvebu/clk-core.h b/drivers/clk/mvebu/clk-core.h new file mode 100644 index 0000000..28b5e02 --- /dev/null +++ b/drivers/clk/mvebu/clk-core.h @@ -0,0 +1,18 @@ +/* + * * Marvell EBU clock core handling defined at reset + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MVEBU_CLK_CORE_H +#define __MVEBU_CLK_CORE_H + +void __init mvebu_core_clk_init(void); + +#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c new file mode 100644 index 0000000..e6742ac --- /dev/null +++ b/drivers/clk/mvebu/clk.c @@ -0,0 +1,23 @@ +/* + * Marvell EBU SoC clock handling. + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/clk/mvebu.h> +#include <linux/of.h> +#include "clk-core.h" + +void __init mvebu_clocks_init(void) +{ + mvebu_core_clk_init(); +} diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h new file mode 100644 index 0000000..8c4ae71 --- /dev/null +++ b/include/linux/clk/mvebu.h @@ -0,0 +1,22 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __CLK_MVEBU_H_ +#define __CLK_MVEBU_H_ + +void __init mvebu_clocks_init(void); + +#endif -- 1.7.10.4
next prev parent reply other threads:[~2012-11-15 21:28 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-11-15 21:28 [PATCH 0/7] core, cpu and gated clocks for mvebu Andrew Lunn 2012-11-15 21:28 ` Andrew Lunn 2012-11-15 21:28 ` Andrew Lunn [this message] 2012-11-15 21:28 ` [PATCH 1/7] clk: mvebu: add mvebu core clocks Andrew Lunn [not found] ` <1353014906-31566-2-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-11-16 12:52 ` Gregory CLEMENT 2012-11-16 12:52 ` Gregory CLEMENT 2012-11-15 21:28 ` [PATCH 2/7] clk: mvebu: add armada-370-xp CPU specific clocks Andrew Lunn 2012-11-15 21:28 ` Andrew Lunn [not found] ` <1353014906-31566-3-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-11-15 21:44 ` Thomas Petazzoni 2012-11-15 21:44 ` Thomas Petazzoni 2012-11-15 21:28 ` [PATCH 3/7] clk: armada-370-xp: add support for clock framework Andrew Lunn 2012-11-15 21:28 ` Andrew Lunn [not found] ` <1353014906-31566-4-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-11-15 21:46 ` Thomas Petazzoni 2012-11-15 21:46 ` Thomas Petazzoni [not found] ` <1353014906-31566-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-11-15 21:28 ` [PATCH 4/7] clocksource: time-armada-370-xp converted to clk framework Andrew Lunn 2012-11-15 21:28 ` Andrew Lunn [not found] ` <1353014906-31566-5-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-11-15 21:49 ` Thomas Petazzoni 2012-11-15 21:49 ` Thomas Petazzoni 2012-11-15 21:28 ` [PATCH 5/7] clk: mvebu: add clock gating control provider for DT Andrew Lunn 2012-11-15 21:28 ` Andrew Lunn 2012-11-16 18:01 ` [PATCH 0/2] Add clock gating support for Armada 370/XP Gregory CLEMENT 2012-11-16 18:01 ` Gregory CLEMENT 2012-11-16 18:01 ` [PATCH 1/2] clk: mvebu: armada 370/XP add clock gating control provider for DT Gregory CLEMENT 2012-11-16 18:01 ` Gregory CLEMENT 2012-11-17 8:26 ` Andrew Lunn 2012-11-17 8:26 ` Andrew Lunn 2012-11-17 9:41 ` Gregory CLEMENT 2012-11-17 9:41 ` Gregory CLEMENT 2012-11-17 13:54 ` Andrew Lunn 2012-11-17 13:54 ` Andrew Lunn 2012-11-19 4:30 ` Mike Turquette 2012-11-19 4:30 ` Mike Turquette 2012-11-19 15:46 ` Thomas Petazzoni 2012-11-19 15:46 ` Thomas Petazzoni 2012-11-19 15:58 ` Andrew Lunn 2012-11-19 15:58 ` Andrew Lunn 2012-11-19 16:43 ` Thomas Petazzoni 2012-11-19 16:43 ` Thomas Petazzoni 2012-11-19 16:01 ` Sebastian Hesselbarth 2012-11-19 16:01 ` Sebastian Hesselbarth 2012-11-16 18:02 ` [PATCH 2/2] arm: mvebu: armada 370/XP adding clock gating support: dt binding Gregory CLEMENT 2012-11-16 18:02 ` Gregory CLEMENT 2012-11-15 21:28 ` [PATCH 6/7] ARM: dove: switch to DT clock providers Andrew Lunn 2012-11-15 21:28 ` Andrew Lunn [not found] ` <1353014906-31566-7-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-11-15 21:52 ` Thomas Petazzoni 2012-11-15 21:52 ` Thomas Petazzoni 2012-11-15 21:28 ` [PATCH 7/7] ARM: Kirkwood: " Andrew Lunn 2012-11-15 21:28 ` Andrew Lunn [not found] ` <1353014906-31566-8-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org> 2012-11-16 17:33 ` Gregory CLEMENT 2012-11-16 17:33 ` Gregory CLEMENT 2012-11-15 21:54 ` [PATCH 0/7] core, cpu and gated clocks for mvebu Thomas Petazzoni 2012-11-15 21:54 ` Thomas Petazzoni 2012-11-16 7:32 ` Andrew Lunn 2012-11-16 7:32 ` Andrew Lunn 2012-11-16 12:51 ` Gregory CLEMENT 2012-11-16 12:51 ` Gregory CLEMENT
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1353014906-31566-2-git-send-email-andrew@lunn.ch \ --to=andrew@lunn.ch \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=gregory.clement@free-electrons.com \ --cc=jason@lakedaemon.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=mturquette@linaro.org \ --cc=sebastian.hesselbarth@gmail.com \ --cc=thomas.petazzoni@free-electrons.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.