[GIT PULL] Fixes/cleanup for vt8500 serial driver

[GIT PULL] Fixes/cleanup for vt8500 serial driver

[Tony Prisk]

Hi Greg,

This is a series of fixes/cleanup for the vt8500 serial/uart driver.

I'm not sure how you want to handle these.

Arguably #1, #2 and #3 are bug fixes which could go into 3.8. None of
them cause immediate problems, but potentially could.

#4 is definately a cleanup for 3.9.

Let me know if you would rather I split them up and how.

Regards
Tony P


The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:

  Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)

are available in the git repository at:

  git://server.prisktech.co.nz/git/linuxwmt.git tags/vt8500-serial-fixes

for you to fetch changes up to 55df4e19676ca7674bcdc5831036ed3f708050e8:

  serial: tty: Cleanup code using devm_ function (2013-01-14 05:39:17 +1300)

----------------------------------------------------------------
Series of fixes/cleanups for vt8500 serial/UART driver.

----------------------------------------------------------------
Tony Prisk (4):
      serial: vt8500: Fix range-checking on vt8500_uart_ports
      serial: vt8500: ioremap'd resource is never freed
      serial: vt8500: UART uses gated clock rather than 24Mhz reference
      serial: tty: Cleanup code using devm_ function

 arch/arm/boot/dts/vt8500.dtsi      |   40 +++++++++++++++++++++---
 arch/arm/boot/dts/wm8505.dtsi      |   60 ++++++++++++++++++++++++++++++++----
 arch/arm/boot/dts/wm8650.dtsi      |   20 ++++++++++--
 drivers/tty/serial/vt8500_serial.c |   38 +++++++++++------------
 4 files changed, 126 insertions(+), 32 deletions(-)

[GIT PULL] Fixes/cleanup for vt8500 serial driver

[Tony Prisk]

Hi Greg,

This is a series of fixes/cleanup for the vt8500 serial/uart driver.

I'm not sure how you want to handle these.

Arguably #1, #2 and #3 are bug fixes which could go into 3.8. None of
them cause immediate problems, but potentially could.

#4 is definately a cleanup for 3.9.

Let me know if you would rather I split them up and how.

Regards
Tony P


The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:

  Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)

are available in the git repository at:

  git://server.prisktech.co.nz/git/linuxwmt.git tags/vt8500-serial-fixes

for you to fetch changes up to 55df4e19676ca7674bcdc5831036ed3f708050e8:

  serial: tty: Cleanup code using devm_ function (2013-01-14 05:39:17 +1300)

----------------------------------------------------------------
Series of fixes/cleanups for vt8500 serial/UART driver.

----------------------------------------------------------------
Tony Prisk (4):
      serial: vt8500: Fix range-checking on vt8500_uart_ports
      serial: vt8500: ioremap'd resource is never freed
      serial: vt8500: UART uses gated clock rather than 24Mhz reference
      serial: tty: Cleanup code using devm_ function

 arch/arm/boot/dts/vt8500.dtsi      |   40 +++++++++++++++++++++---
 arch/arm/boot/dts/wm8505.dtsi      |   60 ++++++++++++++++++++++++++++++++----
 arch/arm/boot/dts/wm8650.dtsi      |   20 ++++++++++--
 drivers/tty/serial/vt8500_serial.c |   38 +++++++++++------------
 4 files changed, 126 insertions(+), 32 deletions(-)

[PATCH 1/4] serial: vt8500: Fix range-checking on vt8500_uart_ports

[Tony Prisk]

Fix two instances where the index to vt8500_uart_ports is tested
against > VT8500_MAX_PORTS. Correct usage should be >= VT8500_MAX_PORTS.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/tty/serial/vt8500_serial.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 8fd1814..4c4a58d 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -569,7 +569,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 
 	if (np)
 		port = of_alias_get_id(np, "serial");
-		if (port > VT8500_MAX_PORTS)
+		if (port >= VT8500_MAX_PORTS)
 			port = -1;
 	else
 		port = -1;
@@ -580,7 +580,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 					sizeof(vt8500_ports_in_use));
 	}
 
-	if (port > VT8500_MAX_PORTS)
+	if (port >= VT8500_MAX_PORTS)
 		return -ENODEV;
 
 	/* reserve the port id */
-- 
1.7.9.5

[PATCH 1/4] serial: vt8500: Fix range-checking on vt8500_uart_ports

[Tony Prisk]

Fix two instances where the index to vt8500_uart_ports is tested
against > VT8500_MAX_PORTS. Correct usage should be >= VT8500_MAX_PORTS.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/tty/serial/vt8500_serial.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 8fd1814..4c4a58d 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -569,7 +569,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 
 	if (np)
 		port = of_alias_get_id(np, "serial");
-		if (port > VT8500_MAX_PORTS)
+		if (port >= VT8500_MAX_PORTS)
 			port = -1;
 	else
 		port = -1;
@@ -580,7 +580,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 					sizeof(vt8500_ports_in_use));
 	}
 
-	if (port > VT8500_MAX_PORTS)
+	if (port >= VT8500_MAX_PORTS)
 		return -ENODEV;
 
 	/* reserve the port id */
-- 
1.7.9.5

[PATCH 2/4] serial: vt8500: ioremap'd resource is never freed

[Tony Prisk]

Memory mapped via ioremap call is never released. Rather than add an
iounmap call, change allocation function to devm_request_and_ioremap.

Also, change the error on failure for this call to -EBUSY rather than
-ENOMEM.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/tty/serial/vt8500_serial.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 4c4a58d..8865afd 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -615,9 +615,9 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
 
-	vt8500_port->uart.membase = ioremap(mmres->start, resource_size(mmres));
+	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
 	if (!vt8500_port->uart.membase) {
-		ret = -ENOMEM;
+		ret = -EBUSY;
 		goto err;
 	}
 
-- 
1.7.9.5

[PATCH 2/4] serial: vt8500: ioremap'd resource is never freed

[Tony Prisk]

Memory mapped via ioremap call is never released. Rather than add an
iounmap call, change allocation function to devm_request_and_ioremap.

Also, change the error on failure for this call to -EBUSY rather than
-ENOMEM.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/tty/serial/vt8500_serial.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 4c4a58d..8865afd 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -615,9 +615,9 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
 
-	vt8500_port->uart.membase = ioremap(mmres->start, resource_size(mmres));
+	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
 	if (!vt8500_port->uart.membase) {
-		ret = -ENOMEM;
+		ret = -EBUSY;
 		goto err;
 	}
 
-- 
1.7.9.5

[PATCH 3/4] serial: vt8500: UART uses gated clock rather than 24Mhz reference

[Tony Prisk]

UART modules on Wondermedia SoCs are connected via a gated clock
source, rather than directly to the 24Mhz reference clock. While
uboot enables UART0 for debugging, other UART ports are unavailable
until the clock is enabled.

This patch checks that a valid clock is actually passed from devicetree,
enables the clock in probe. This change removes the fallback when a
clock was not specified as it doesn't apply any longer (and would only
work if the UART clock was already enabled).

DTSI files are updated for VT8500, WM8505 and WM8650.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 arch/arm/boot/dts/vt8500.dtsi      |   40 +++++++++++++++++++++---
 arch/arm/boot/dts/wm8505.dtsi      |   60 ++++++++++++++++++++++++++++++++----
 arch/arm/boot/dts/wm8650.dtsi      |   20 ++++++++++--
 drivers/tty/serial/vt8500_serial.c |   17 ++++++----
 4 files changed, 119 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index d8645e9..cf31ced 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -45,6 +45,38 @@
 					compatible = "fixed-clock";
 					clock-frequency = <24000000>;
 				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
 			};
 		};
 
@@ -83,28 +115,28 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart@d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		uart@d8210000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8210000 0x1040>;
 			interrupts = <47>;
-			clocks = <&ref24>;
+			clocks = <&clkuart2>;
 		};
 
 		uart@d82c0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82c0000 0x1040>;
 			interrupts = <50>;
-			clocks = <&ref24>;
+			clocks = <&clkuart3>;
 		};
 
 		rtc@d8100000 {
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index 330f833..e74a1c0 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -59,6 +59,54 @@
 					compatible = "fixed-clock";
 					clock-frequency = <24000000>;
 				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
+
+				clkuart4: uart4 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <22>;
+				};
+
+				clkuart5: uart5 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <23>;
+				};
 			};
 		};
 
@@ -96,42 +144,42 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart@d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		uart@d8210000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8210000 0x1040>;
 			interrupts = <47>;
-			clocks = <&ref24>;
+			clocks = <&clkuart2>;
 		};
 
 		uart@d82c0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82c0000 0x1040>;
 			interrupts = <50>;
-			clocks = <&ref24>;
+			clocks = <&clkuart3>;
 		};
 
 		uart@d8370000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8370000 0x1040>;
 			interrupts = <31>;
-			clocks = <&ref24>;
+			clocks = <&clkuart4>;
 		};
 
 		uart@d8380000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8380000 0x1040>;
 			interrupts = <30>;
-			clocks = <&ref24>;
+			clocks = <&clkuart5>;
 		};
 
 		rtc@d8100000 {
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index 83b9467..e0c42ff 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -75,6 +75,22 @@
 					reg = <0x204>;
 				};
 
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
 				arm: arm {
 					#clock-cells = <0>;
 					compatible = "via,vt8500-device-clock";
@@ -128,14 +144,14 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart@d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		rtc@d8100000 {
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 8865afd..7de279a 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -604,12 +604,16 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 
 	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
-	if (vt8500_port->clk) {
-		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
-	} else {
-		/* use the default of 24Mhz if not specified and warn */
-		pr_warn("%s: serial clock source not specified\n", __func__);
-		vt8500_port->uart.uartclk = 24000000;
+	if (IS_ERR(vt8500_port->clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = clk_prepare_enable(vt8500_port->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err;
 	}
 
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
@@ -639,6 +643,7 @@ static int vt8500_serial_remove(struct platform_device *pdev)
 	struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
 
 	platform_set_drvdata(pdev, NULL);
+	clk_disable_unprepare(vt8500_port->clk);
 	uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
 	kfree(vt8500_port);
 
-- 
1.7.9.5

[PATCH 3/4] serial: vt8500: UART uses gated clock rather than 24Mhz reference

[Tony Prisk]

UART modules on Wondermedia SoCs are connected via a gated clock
source, rather than directly to the 24Mhz reference clock. While
uboot enables UART0 for debugging, other UART ports are unavailable
until the clock is enabled.

This patch checks that a valid clock is actually passed from devicetree,
enables the clock in probe. This change removes the fallback when a
clock was not specified as it doesn't apply any longer (and would only
work if the UART clock was already enabled).

DTSI files are updated for VT8500, WM8505 and WM8650.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 arch/arm/boot/dts/vt8500.dtsi      |   40 +++++++++++++++++++++---
 arch/arm/boot/dts/wm8505.dtsi      |   60 ++++++++++++++++++++++++++++++++----
 arch/arm/boot/dts/wm8650.dtsi      |   20 ++++++++++--
 drivers/tty/serial/vt8500_serial.c |   17 ++++++----
 4 files changed, 119 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index d8645e9..cf31ced 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -45,6 +45,38 @@
 					compatible = "fixed-clock";
 					clock-frequency = <24000000>;
 				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
 			};
 		};
 
@@ -83,28 +115,28 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart at d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		uart at d8210000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8210000 0x1040>;
 			interrupts = <47>;
-			clocks = <&ref24>;
+			clocks = <&clkuart2>;
 		};
 
 		uart at d82c0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82c0000 0x1040>;
 			interrupts = <50>;
-			clocks = <&ref24>;
+			clocks = <&clkuart3>;
 		};
 
 		rtc at d8100000 {
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index 330f833..e74a1c0 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -59,6 +59,54 @@
 					compatible = "fixed-clock";
 					clock-frequency = <24000000>;
 				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
+
+				clkuart4: uart4 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <22>;
+				};
+
+				clkuart5: uart5 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <23>;
+				};
 			};
 		};
 
@@ -96,42 +144,42 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart at d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		uart at d8210000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8210000 0x1040>;
 			interrupts = <47>;
-			clocks = <&ref24>;
+			clocks = <&clkuart2>;
 		};
 
 		uart at d82c0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82c0000 0x1040>;
 			interrupts = <50>;
-			clocks = <&ref24>;
+			clocks = <&clkuart3>;
 		};
 
 		uart at d8370000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8370000 0x1040>;
 			interrupts = <31>;
-			clocks = <&ref24>;
+			clocks = <&clkuart4>;
 		};
 
 		uart at d8380000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8380000 0x1040>;
 			interrupts = <30>;
-			clocks = <&ref24>;
+			clocks = <&clkuart5>;
 		};
 
 		rtc at d8100000 {
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index 83b9467..e0c42ff 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -75,6 +75,22 @@
 					reg = <0x204>;
 				};
 
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
 				arm: arm {
 					#clock-cells = <0>;
 					compatible = "via,vt8500-device-clock";
@@ -128,14 +144,14 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart at d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		rtc at d8100000 {
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 8865afd..7de279a 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -604,12 +604,16 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 
 	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
-	if (vt8500_port->clk) {
-		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
-	} else {
-		/* use the default of 24Mhz if not specified and warn */
-		pr_warn("%s: serial clock source not specified\n", __func__);
-		vt8500_port->uart.uartclk = 24000000;
+	if (IS_ERR(vt8500_port->clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = clk_prepare_enable(vt8500_port->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err;
 	}
 
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
@@ -639,6 +643,7 @@ static int vt8500_serial_remove(struct platform_device *pdev)
 	struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
 
 	platform_set_drvdata(pdev, NULL);
+	clk_disable_unprepare(vt8500_port->clk);
 	uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
 	kfree(vt8500_port);
 
-- 
1.7.9.5

[PATCH 4/4] serial: tty: Cleanup code using devm_ function

[Tony Prisk]

Convert the last memory allocation (vt8500_port) to use devm_kzalloc
and remove the fail path cleanup code from vt8500_serial_probe.

Reorder iomem mapping above clk_enable to simplify fail code. The
clock is only enabled if all other resources are available.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/tty/serial/vt8500_serial.c |   23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 7de279a..1ddae81 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -589,7 +589,8 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
+	vt8500_port = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_port),
+				   GFP_KERNEL);
 	if (!vt8500_port)
 		return -ENOMEM;
 
@@ -603,28 +604,25 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	vt8500_port->uart.dev = &pdev->dev;
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 
+	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
+	if (!vt8500_port->uart.membase)
+		return -EBUSY;
+
 	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
 	if (IS_ERR(vt8500_port->clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	ret = clk_prepare_enable(vt8500_port->clk);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err;
+		return ret;
 	}
 
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
 
-	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
-	if (!vt8500_port->uart.membase) {
-		ret = -EBUSY;
-		goto err;
-	}
-
 	vt8500_uart_ports[port] = vt8500_port;
 
 	uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
@@ -632,10 +630,6 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, vt8500_port);
 
 	return 0;
-
-err:
-	kfree(vt8500_port);
-	return ret;
 }
 
 static int vt8500_serial_remove(struct platform_device *pdev)
@@ -645,7 +639,6 @@ static int vt8500_serial_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	clk_disable_unprepare(vt8500_port->clk);
 	uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
-	kfree(vt8500_port);
 
 	return 0;
 }
-- 
1.7.9.5

[PATCH 4/4] serial: tty: Cleanup code using devm_ function

[Tony Prisk]

Convert the last memory allocation (vt8500_port) to use devm_kzalloc
and remove the fail path cleanup code from vt8500_serial_probe.

Reorder iomem mapping above clk_enable to simplify fail code. The
clock is only enabled if all other resources are available.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/tty/serial/vt8500_serial.c |   23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 7de279a..1ddae81 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -589,7 +589,8 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 		return -EBUSY;
 	}
 
-	vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
+	vt8500_port = devm_kzalloc(&pdev->dev, sizeof(struct vt8500_port),
+				   GFP_KERNEL);
 	if (!vt8500_port)
 		return -ENOMEM;
 
@@ -603,28 +604,25 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	vt8500_port->uart.dev = &pdev->dev;
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 
+	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
+	if (!vt8500_port->uart.membase)
+		return -EBUSY;
+
 	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
 	if (IS_ERR(vt8500_port->clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	ret = clk_prepare_enable(vt8500_port->clk);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err;
+		return ret;
 	}
 
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
 
-	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
-	if (!vt8500_port->uart.membase) {
-		ret = -EBUSY;
-		goto err;
-	}
-
 	vt8500_uart_ports[port] = vt8500_port;
 
 	uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
@@ -632,10 +630,6 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, vt8500_port);
 
 	return 0;
-
-err:
-	kfree(vt8500_port);
-	return ret;
 }
 
 static int vt8500_serial_remove(struct platform_device *pdev)
@@ -645,7 +639,6 @@ static int vt8500_serial_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	clk_disable_unprepare(vt8500_port->clk);
 	uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
-	kfree(vt8500_port);
 
 	return 0;
 }
-- 
1.7.9.5

Re: [PATCH 3/4] serial: vt8500: UART uses gated clock rather than 24Mhz reference

[Russell King - ARM Linux]

On Mon, Jan 14, 2013 at 03:04:18PM +1300, Tony Prisk wrote:
> -	if (vt8500_port->clk) {
> -		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
> -	} else {
> -		/* use the default of 24Mhz if not specified and warn */
> -		pr_warn("%s: serial clock source not specified\n", __func__);
> -		vt8500_port->uart.uartclk = 24000000;
> +	if (IS_ERR(vt8500_port->clk)) {
> +		dev_err(&pdev->dev, "failed to get clock\n");
> +		ret = -EINVAL;
> +		goto err;
> +	}
> +
> +	ret = clk_prepare_enable(vt8500_port->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to enable clock\n");
> +		goto err;

Looks like you get rid of the initialization of vt8500_port->uart.uartclk
here.  Was that intentional?

[PATCH 3/4] serial: vt8500: UART uses gated clock rather than 24Mhz reference

[Russell King - ARM Linux]

On Mon, Jan 14, 2013 at 03:04:18PM +1300, Tony Prisk wrote:
> -	if (vt8500_port->clk) {
> -		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
> -	} else {
> -		/* use the default of 24Mhz if not specified and warn */
> -		pr_warn("%s: serial clock source not specified\n", __func__);
> -		vt8500_port->uart.uartclk = 24000000;
> +	if (IS_ERR(vt8500_port->clk)) {
> +		dev_err(&pdev->dev, "failed to get clock\n");
> +		ret = -EINVAL;
> +		goto err;
> +	}
> +
> +	ret = clk_prepare_enable(vt8500_port->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to enable clock\n");
> +		goto err;

Looks like you get rid of the initialization of vt8500_port->uart.uartclk
here.  Was that intentional?

Re: [PATCH 2/4] serial: vt8500: ioremap'd resource is never freed

[Sergei Shtylyov]

Hello.

On 14-01-2013 6:04, Tony Prisk wrote:

> Memory mapped via ioremap call is never released. Rather than add an
> iounmap call, change allocation function to devm_request_and_ioremap.

> Also, change the error on failure for this call to -EBUSY rather than
> -ENOMEM.

    Not really well justified. See below.

> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> ---
>   drivers/tty/serial/vt8500_serial.c |    4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

> diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
> index 4c4a58d..8865afd 100644
> --- a/drivers/tty/serial/vt8500_serial.c
> +++ b/drivers/tty/serial/vt8500_serial.c
> @@ -615,9 +615,9 @@ static int vt8500_serial_probe(struct platform_device *pdev)
>   	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
>   		 "VT8500 UART%d", pdev->id);
>
> -	vt8500_port->uart.membase = ioremap(mmres->start, resource_size(mmres));
> +	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
>   	if (!vt8500_port->uart.membase) {
> -		ret = -ENOMEM;
> +		ret = -EBUSY;

    According to the comment to devm_request_and_ioremap(), the recommended 
return code on its failure -EADDRNOTAVAIL.

WBR, Sergei

[PATCH 2/4] serial: vt8500: ioremap'd resource is never freed

[Sergei Shtylyov]

Hello.

On 14-01-2013 6:04, Tony Prisk wrote:

> Memory mapped via ioremap call is never released. Rather than add an
> iounmap call, change allocation function to devm_request_and_ioremap.

> Also, change the error on failure for this call to -EBUSY rather than
> -ENOMEM.

    Not really well justified. See below.

> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
> ---
>   drivers/tty/serial/vt8500_serial.c |    4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)

> diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
> index 4c4a58d..8865afd 100644
> --- a/drivers/tty/serial/vt8500_serial.c
> +++ b/drivers/tty/serial/vt8500_serial.c
> @@ -615,9 +615,9 @@ static int vt8500_serial_probe(struct platform_device *pdev)
>   	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
>   		 "VT8500 UART%d", pdev->id);
>
> -	vt8500_port->uart.membase = ioremap(mmres->start, resource_size(mmres));
> +	vt8500_port->uart.membase = devm_request_and_ioremap(&pdev->dev, mmres);
>   	if (!vt8500_port->uart.membase) {
> -		ret = -ENOMEM;
> +		ret = -EBUSY;

    According to the comment to devm_request_and_ioremap(), the recommended 
return code on its failure -EADDRNOTAVAIL.

WBR, Sergei