From: Peter Chen <peter.chen@freescale.com>
To: <shawn.guo@linaro.org>, <balbi@ti.com>, <kernel@pengutronix.de>,
<gregkh@linuxfoundation.org>, <r58472@freescale.com>
Cc: linux-usb@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
Date: Mon, 14 Jan 2013 15:18:17 +0800 [thread overview]
Message-ID: <1358147897-8599-1-git-send-email-peter.chen@freescale.com> (raw)
It changes the driver to use platform_device_id rather than cpu_is_xxx
to determine the SoC type, and updates the platform code accordingly.
Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
Tested at mx51 bbg board, it works ok after enable phy clock
(Need another patch to fix this problem)
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
Changes for v2:
- Add const for fsl_udc_devtype
- Do ioremap for phy address at fsl-mxc-udc
arch/arm/mach-imx/clk-imx25.c | 6 +-
arch/arm/mach-imx/clk-imx27.c | 6 +-
arch/arm/mach-imx/clk-imx31.c | 6 +-
arch/arm/mach-imx/clk-imx35.c | 6 +-
arch/arm/mach-imx/clk-imx51-imx53.c | 6 +-
arch/arm/mach-imx/devices/devices-common.h | 1 +
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 +++---
drivers/usb/gadget/fsl_mxc_udc.c | 23 +++++----
drivers/usb/gadget/fsl_udc_core.c | 52 +++++++++++++-------
drivers/usb/gadget/fsl_usb2_udc.h | 13 ++++--
include/linux/fsl_devices.h | 8 +++
11 files changed, 87 insertions(+), 55 deletions(-)
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index b197aa7..67e353d 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx25");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx25");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx25");
clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 4c1d1e4..1ffe3b5 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8be64e0..ef66eaf 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx31");
+ clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx31");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx31");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
/* i.mx31 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 66f3d65..69fe9c8 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -251,9 +251,9 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx35");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx35");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx35");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 579023f..fb7cb84 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 6277baf..9bd5777 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 37e4439..fb527c7 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -11,35 +11,36 @@
#include "../hardware.h"
#include "devices-common.h"
-#define imx_fsl_usb2_udc_data_entry_single(soc) \
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX25);
+ imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx25");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX27);
+ imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX31);
+ imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx31");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX35);
+ imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx35");
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX51);
+ imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
#endif
struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+ return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086..0e858e6 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,17 +18,16 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-
static struct clk *mxc_ahb_clk;
static struct clk *mxc_per_clk;
static struct clk *mxc_ipg_clk;
/* workaround ENGcm09152 for i.MX35 */
-#define USBPHYCTRL_OTGBASE_OFFSET 0x608
+#define MX35_USBPHYCTRL_OFFSET 0x600
+#define USBPHYCTRL_OTGBASE_OFFSET 0x8
#define USBPHYCTRL_EVDO (1 << 23)
-int fsl_udc_clk_init(struct platform_device *pdev)
+int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata;
unsigned long freq;
@@ -59,7 +58,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
clk_prepare_enable(mxc_per_clk);
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
- if (!cpu_is_mx51()) {
+ if (!(devtype == IMX51_UDC)) {
freq = clk_get_rate(mxc_per_clk);
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
@@ -79,20 +78,22 @@ eclkrate:
return ret;
}
-void fsl_udc_clk_finalize(struct platform_device *pdev)
+void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
- if (cpu_is_mx35()) {
+ if (devtype == IMX35_UDC) {
unsigned int v;
+ void __iomem *phy_regs = ioremap((unsigned long)pdata->regs +
+ MX35_USBPHYCTRL_OFFSET, 512);
/* workaround ENGcm09152 for i.MX35 */
if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
- v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
+ v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
writel(v | USBPHYCTRL_EVDO,
- MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
+ phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
}
+ iounmap(phy_regs);
}
/* ULPI transceivers don't need usbpll */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c19f7f1..c32119b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -41,6 +41,7 @@
#include <linux/fsl_devices.h>
#include <linux/dmapool.h>
#include <linux/delay.h>
+#include <linux/of_device.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -2438,17 +2439,13 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
unsigned int i;
u32 dccparams;
- if (strcmp(pdev->name, driver_name)) {
- VDBG("Wrong device");
- return -ENODEV;
- }
-
udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
if (udc_controller == NULL) {
ERR("malloc udc failed\n");
return -ENOMEM;
}
+ udc_controller->devtype = pdev->id_entry->driver_data;
pdata = pdev->dev.platform_data;
udc_controller->pdata = pdata;
spin_lock_init(&udc_controller->lock);
@@ -2505,7 +2502,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
#endif
/* Initialize USB clocks */
- ret = fsl_udc_clk_init(pdev);
+ ret = fsl_udc_clk_init(udc_controller->devtype, pdev);
if (ret < 0)
goto err_iounmap_noclk;
@@ -2547,7 +2544,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
dr_controller_setup(udc_controller);
}
- fsl_udc_clk_finalize(pdev);
+ fsl_udc_clk_finalize(udc_controller->devtype, pdev);
/* Setup gadget structure */
udc_controller->gadget.ops = &fsl_gadget_ops;
@@ -2756,22 +2753,41 @@ static int fsl_udc_otg_resume(struct device *dev)
return fsl_udc_resume(NULL);
}
-
/*-------------------------------------------------------------------------
Register entry point for the peripheral controller driver
--------------------------------------------------------------------------*/
-
+static const struct platform_device_id fsl_udc_devtype[] = {
+ {
+ .name = "imx-udc-mx25",
+ .driver_data = IMX25_UDC,
+ }, {
+ .name = "imx-udc-mx27",
+ .driver_data = IMX27_UDC,
+ }, {
+ .name = "imx-udc-mx31",
+ .driver_data = IMX31_UDC,
+ }, {
+ .name = "imx-udc-mx35",
+ .driver_data = IMX35_UDC,
+ }, {
+ .name = "imx-udc-mx51",
+ .driver_data = IMX51_UDC,
+ }
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
static struct platform_driver udc_driver = {
- .remove = __exit_p(fsl_udc_remove),
+ .remove = __exit_p(fsl_udc_remove),
+ /* Just for FSL i.mx SoC currently */
+ .id_table = fsl_udc_devtype,
/* these suspend and resume are not usb suspend and resume */
- .suspend = fsl_udc_suspend,
- .resume = fsl_udc_resume,
- .driver = {
- .name = (char *)driver_name,
- .owner = THIS_MODULE,
- /* udc suspend/resume called from OTG driver */
- .suspend = fsl_udc_otg_suspend,
- .resume = fsl_udc_otg_resume,
+ .suspend = fsl_udc_suspend,
+ .resume = fsl_udc_resume,
+ .driver = {
+ .name = (char *)driver_name,
+ .owner = THIS_MODULE,
+ /* udc suspend/resume called from OTG driver */
+ .suspend = fsl_udc_otg_suspend,
+ .resume = fsl_udc_otg_resume,
},
};
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index f61a967..bc1f6d0 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -505,6 +505,8 @@ struct fsl_udc {
u32 ep0_dir; /* Endpoint zero direction: can be
USB_DIR_IN or USB_DIR_OUT */
u8 device_address; /* Device USB address */
+ /* devtype for kinds of SoC, only i.mx uses it now */
+ enum fsl_udc_type devtype;
};
/*-------------------------------------------------------------------------*/
@@ -591,15 +593,18 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
struct platform_device;
#ifdef CONFIG_ARCH_MXC
-int fsl_udc_clk_init(struct platform_device *pdev);
-void fsl_udc_clk_finalize(struct platform_device *pdev);
+int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev);
+void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev);
void fsl_udc_clk_release(void);
#else
-static inline int fsl_udc_clk_init(struct platform_device *pdev)
+static inline int fsl_udc_clk_init(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
return 0;
}
-static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+static inline void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
}
static inline void fsl_udc_clk_release(void)
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a82296a..7cb3fe0 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -66,6 +66,14 @@ enum fsl_usb2_phy_modes {
FSL_USB2_PHY_SERIAL,
};
+enum fsl_udc_type {
+ IMX25_UDC,
+ IMX27_UDC,
+ IMX31_UDC,
+ IMX35_UDC,
+ IMX51_UDC,
+};
+
struct clk;
struct platform_device;
--
1.7.0.4
WARNING: multiple messages have this Message-ID (diff)
From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h
Date: Mon, 14 Jan 2013 15:18:17 +0800 [thread overview]
Message-ID: <1358147897-8599-1-git-send-email-peter.chen@freescale.com> (raw)
It changes the driver to use platform_device_id rather than cpu_is_xxx
to determine the SoC type, and updates the platform code accordingly.
Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
Tested at mx51 bbg board, it works ok after enable phy clock
(Need another patch to fix this problem)
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
Changes for v2:
- Add const for fsl_udc_devtype
- Do ioremap for phy address at fsl-mxc-udc
arch/arm/mach-imx/clk-imx25.c | 6 +-
arch/arm/mach-imx/clk-imx27.c | 6 +-
arch/arm/mach-imx/clk-imx31.c | 6 +-
arch/arm/mach-imx/clk-imx35.c | 6 +-
arch/arm/mach-imx/clk-imx51-imx53.c | 6 +-
arch/arm/mach-imx/devices/devices-common.h | 1 +
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c | 15 +++---
drivers/usb/gadget/fsl_mxc_udc.c | 23 +++++----
drivers/usb/gadget/fsl_udc_core.c | 52 +++++++++++++-------
drivers/usb/gadget/fsl_usb2_udc.h | 13 ++++--
include/linux/fsl_devices.h | 8 +++
11 files changed, 87 insertions(+), 55 deletions(-)
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index b197aa7..67e353d 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx25");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx25");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx25");
clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 4c1d1e4..1ffe3b5 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8be64e0..ef66eaf 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx31");
+ clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx31");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx31");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
/* i.mx31 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 66f3d65..69fe9c8 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -251,9 +251,9 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx35");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx35");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx35");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 579023f..fb7cb84 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
- clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
- clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 6277baf..9bd5777 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
+ const char *devid;
resource_size_t iobase;
resource_size_t irq;
};
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 37e4439..fb527c7 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -11,35 +11,36 @@
#include "../hardware.h"
#include "devices-common.h"
-#define imx_fsl_usb2_udc_data_entry_single(soc) \
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
+ .devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX25);
+ imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx25");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX27);
+ imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX31);
+ imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx31");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX35);
+ imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx35");
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX51);
+ imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
#endif
struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
.flags = IORESOURCE_IRQ,
},
};
- return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+ return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086..0e858e6 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,17 +18,16 @@
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-
static struct clk *mxc_ahb_clk;
static struct clk *mxc_per_clk;
static struct clk *mxc_ipg_clk;
/* workaround ENGcm09152 for i.MX35 */
-#define USBPHYCTRL_OTGBASE_OFFSET 0x608
+#define MX35_USBPHYCTRL_OFFSET 0x600
+#define USBPHYCTRL_OTGBASE_OFFSET 0x8
#define USBPHYCTRL_EVDO (1 << 23)
-int fsl_udc_clk_init(struct platform_device *pdev)
+int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata;
unsigned long freq;
@@ -59,7 +58,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
clk_prepare_enable(mxc_per_clk);
/* make sure USB_CLK is running@60 MHz +/- 1000 Hz */
- if (!cpu_is_mx51()) {
+ if (!(devtype == IMX51_UDC)) {
freq = clk_get_rate(mxc_per_clk);
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
@@ -79,20 +78,22 @@ eclkrate:
return ret;
}
-void fsl_udc_clk_finalize(struct platform_device *pdev)
+void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
- if (cpu_is_mx35()) {
+ if (devtype == IMX35_UDC) {
unsigned int v;
+ void __iomem *phy_regs = ioremap((unsigned long)pdata->regs +
+ MX35_USBPHYCTRL_OFFSET, 512);
/* workaround ENGcm09152 for i.MX35 */
if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
- v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
+ v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
writel(v | USBPHYCTRL_EVDO,
- MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
- USBPHYCTRL_OTGBASE_OFFSET));
+ phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
}
+ iounmap(phy_regs);
}
/* ULPI transceivers don't need usbpll */
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c19f7f1..c32119b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -41,6 +41,7 @@
#include <linux/fsl_devices.h>
#include <linux/dmapool.h>
#include <linux/delay.h>
+#include <linux/of_device.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -2438,17 +2439,13 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
unsigned int i;
u32 dccparams;
- if (strcmp(pdev->name, driver_name)) {
- VDBG("Wrong device");
- return -ENODEV;
- }
-
udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
if (udc_controller == NULL) {
ERR("malloc udc failed\n");
return -ENOMEM;
}
+ udc_controller->devtype = pdev->id_entry->driver_data;
pdata = pdev->dev.platform_data;
udc_controller->pdata = pdata;
spin_lock_init(&udc_controller->lock);
@@ -2505,7 +2502,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
#endif
/* Initialize USB clocks */
- ret = fsl_udc_clk_init(pdev);
+ ret = fsl_udc_clk_init(udc_controller->devtype, pdev);
if (ret < 0)
goto err_iounmap_noclk;
@@ -2547,7 +2544,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
dr_controller_setup(udc_controller);
}
- fsl_udc_clk_finalize(pdev);
+ fsl_udc_clk_finalize(udc_controller->devtype, pdev);
/* Setup gadget structure */
udc_controller->gadget.ops = &fsl_gadget_ops;
@@ -2756,22 +2753,41 @@ static int fsl_udc_otg_resume(struct device *dev)
return fsl_udc_resume(NULL);
}
-
/*-------------------------------------------------------------------------
Register entry point for the peripheral controller driver
--------------------------------------------------------------------------*/
-
+static const struct platform_device_id fsl_udc_devtype[] = {
+ {
+ .name = "imx-udc-mx25",
+ .driver_data = IMX25_UDC,
+ }, {
+ .name = "imx-udc-mx27",
+ .driver_data = IMX27_UDC,
+ }, {
+ .name = "imx-udc-mx31",
+ .driver_data = IMX31_UDC,
+ }, {
+ .name = "imx-udc-mx35",
+ .driver_data = IMX35_UDC,
+ }, {
+ .name = "imx-udc-mx51",
+ .driver_data = IMX51_UDC,
+ }
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
static struct platform_driver udc_driver = {
- .remove = __exit_p(fsl_udc_remove),
+ .remove = __exit_p(fsl_udc_remove),
+ /* Just for FSL i.mx SoC currently */
+ .id_table = fsl_udc_devtype,
/* these suspend and resume are not usb suspend and resume */
- .suspend = fsl_udc_suspend,
- .resume = fsl_udc_resume,
- .driver = {
- .name = (char *)driver_name,
- .owner = THIS_MODULE,
- /* udc suspend/resume called from OTG driver */
- .suspend = fsl_udc_otg_suspend,
- .resume = fsl_udc_otg_resume,
+ .suspend = fsl_udc_suspend,
+ .resume = fsl_udc_resume,
+ .driver = {
+ .name = (char *)driver_name,
+ .owner = THIS_MODULE,
+ /* udc suspend/resume called from OTG driver */
+ .suspend = fsl_udc_otg_suspend,
+ .resume = fsl_udc_otg_resume,
},
};
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index f61a967..bc1f6d0 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -505,6 +505,8 @@ struct fsl_udc {
u32 ep0_dir; /* Endpoint zero direction: can be
USB_DIR_IN or USB_DIR_OUT */
u8 device_address; /* Device USB address */
+ /* devtype for kinds of SoC, only i.mx uses it now */
+ enum fsl_udc_type devtype;
};
/*-------------------------------------------------------------------------*/
@@ -591,15 +593,18 @@ static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
struct platform_device;
#ifdef CONFIG_ARCH_MXC
-int fsl_udc_clk_init(struct platform_device *pdev);
-void fsl_udc_clk_finalize(struct platform_device *pdev);
+int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev);
+void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev);
void fsl_udc_clk_release(void);
#else
-static inline int fsl_udc_clk_init(struct platform_device *pdev)
+static inline int fsl_udc_clk_init(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
return 0;
}
-static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+static inline void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+ struct platform_device *pdev)
{
}
static inline void fsl_udc_clk_release(void)
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a82296a..7cb3fe0 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -66,6 +66,14 @@ enum fsl_usb2_phy_modes {
FSL_USB2_PHY_SERIAL,
};
+enum fsl_udc_type {
+ IMX25_UDC,
+ IMX27_UDC,
+ IMX31_UDC,
+ IMX35_UDC,
+ IMX51_UDC,
+};
+
struct clk;
struct platform_device;
--
1.7.0.4
next reply other threads:[~2013-01-14 7:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-14 7:18 Peter Chen [this message]
2013-01-14 7:18 ` [PATCH v2 1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h Peter Chen
2013-01-14 7:48 ` Felipe Balbi
2013-01-14 7:48 ` Felipe Balbi
2013-01-14 8:17 ` Peter Chen
2013-01-14 8:17 ` Peter Chen
2013-01-14 8:50 ` Felipe Balbi
2013-01-14 8:50 ` Felipe Balbi
2013-01-14 9:13 ` Peter Chen
2013-01-14 9:13 ` Peter Chen
2013-01-14 9:18 ` Felipe Balbi
2013-01-14 9:18 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358147897-8599-1-git-send-email-peter.chen@freescale.com \
--to=peter.chen@freescale.com \
--cc=balbi@ti.com \
--cc=gregkh@linuxfoundation.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=r58472@freescale.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.