* [PATCH 0/6] ARM: S3C24XX: Cleanup mach-s3c2410, mach-s3c2412 and mach-s3c2440
@ 2013-01-22 1:12 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel
This is for cleanup mach-s3c2410, mach-s3c2412 and mach-s3c2440 directories.
Basically, cpufreq driver in there should be implemented into drivers/cpufreq/
but I think, would be better if we could cleanup the mach- directories.
arch/arm/Kconfig | 4 ----
arch/arm/Makefile | 2 +-
arch/arm/mach-s3c2410/Kconfig | 20 ----------------
arch/arm/mach-s3c2410/Makefile | 14 -----------
arch/arm/mach-s3c2412/Kconfig | 13 -----------
arch/arm/mach-s3c2412/Makefile | 12 ----------
arch/arm/mach-s3c2412/gpio.c | 62 -------------------------------------------------
arch/arm/mach-s3c2440/Kconfig | 37 -----------------------------
arch/arm/mach-s3c2440/Makefile | 15 ------------
arch/arm/mach-s3c24xx/Kconfig | 56 ++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-s3c24xx/Makefile | 6 +++++
arch/arm/{mach-s3c2410/cpu-freq.c => mach-s3c24xx/cpufreq-s3c2410.c} | 7 ++----
arch/arm/{mach-s3c2412/cpu-freq.c => mach-s3c24xx/cpufreq-s3c2412.c} | 6 ++---
arch/arm/{mach-s3c2440/s3c2440-cpufreq.c => mach-s3c24xx/cpufreq-s3c2440.c} | 4 +---
arch/arm/mach-s3c24xx/include/mach/hardware.h | 6 -----
arch/arm/{mach-s3c2410/pll.c => mach-s3c24xx/pll-s3c2410.c} | 5 +---
arch/arm/{mach-s3c2440/s3c2440-pll-12000000.c => mach-s3c24xx/pll-s3c2440-12000000.c} | 5 +---
arch/arm/{mach-s3c2440/s3c2440-pll-16934400.c => mach-s3c24xx/pll-s3c2440-16934400.c} | 5 +---
18 files changed, 71 insertions(+), 208 deletions(-)
[PATCH 1/6] ARM: S3C24XX: Move mach-s3c2410/ cpufreq into
[PATCH 2/6] ARM: S3C24XX: Move mach-s3c2410/ pll into mach-s3c24xx/
[PATCH 3/6] ARM: S3C2412: Remove useless codes mach-s3c2412/gpio.c
[PATCH 4/6] ARM: S3C24XX: Move mach-s3c2412/ cpufreq driver into
[PATCH 5/6] ARM: S3C24XX: Move mach-s3c2440/ cpufreq driver into
[PATCH 6/6] ARM: S3C24XX: Move mach-s3c2440/ pll into mach-s3c24xx/
^ permalink raw reply [flat|nested] 14+ messages in thread* [PATCH 1/6] ARM: S3C24XX: Move mach-s3c2410/ cpufreq into mach-s3c24xx/
2013-01-22 1:12 ` Kukjin Kim
@ 2013-01-22 1:12 ` Kukjin Kim
-1 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Kukjin Kim
Basically, the cpufreq driver for s3c2410 should be implemented into
drivers/cpufreq, but we don't need to keep the mach-s3c2410 directory.
So this patch moves current cpufreq driver into mach-s3c24xx/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2410/Kconfig | 7 -------
arch/arm/mach-s3c2410/Makefile | 1 -
arch/arm/mach-s3c24xx/Kconfig | 7 +++++++
arch/arm/mach-s3c24xx/Makefile | 1 +
.../{mach-s3c2410/cpu-freq.c => mach-s3c24xx/cpufreq-s3c2410.c} | 7 ++-----
5 files changed, 10 insertions(+), 13 deletions(-)
rename arch/arm/{mach-s3c2410/cpu-freq.c => mach-s3c24xx/cpufreq-s3c2410.c} (98%)
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 68d89cb..910b8d2 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -4,13 +4,6 @@
# cpu frequency scaling support
-config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2410
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
-
config S3C2410_PLLTABLE
bool
depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 6b9a316..2a160a5 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -9,6 +9,5 @@ obj-m :=
obj-n :=
obj- :=
-obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 25df14a..04921b9 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -127,6 +127,13 @@ config S3C2410_PM
if CPU_S3C2410
+config S3C2410_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
config S3C24XX_SIMTEC_NOR
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0ab6ab1..3c9fd51 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -17,6 +17,7 @@ obj- :=
obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
similarity index 98%
rename from arch/arm/mach-s3c2410/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
index 5404535..cfa0dd8 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/cpu-freq.c
- *
+/*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -81,7 +80,7 @@ static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
cfg->divs.p_divisor = pdiv;
cfg->divs.h_divisor = hdiv;
- return 0 ;
+ return 0;
}
static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
@@ -131,7 +130,6 @@ static int __init s3c2410_cpufreq_init(void)
{
return subsys_interface_register(&s3c2410_cpufreq_interface);
}
-
arch_initcall(s3c2410_cpufreq_init);
static int s3c2410a_cpufreq_add(struct device *dev,
@@ -159,5 +157,4 @@ static int __init s3c2410a_cpufreq_init(void)
{
return subsys_interface_register(&s3c2410a_cpufreq_interface);
}
-
arch_initcall(s3c2410a_cpufreq_init);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 1/6] ARM: S3C24XX: Move mach-s3c2410/ cpufreq into mach-s3c24xx/
@ 2013-01-22 1:12 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel
Basically, the cpufreq driver for s3c2410 should be implemented into
drivers/cpufreq, but we don't need to keep the mach-s3c2410 directory.
So this patch moves current cpufreq driver into mach-s3c24xx/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2410/Kconfig | 7 -------
arch/arm/mach-s3c2410/Makefile | 1 -
arch/arm/mach-s3c24xx/Kconfig | 7 +++++++
arch/arm/mach-s3c24xx/Makefile | 1 +
.../{mach-s3c2410/cpu-freq.c => mach-s3c24xx/cpufreq-s3c2410.c} | 7 ++-----
5 files changed, 10 insertions(+), 13 deletions(-)
rename arch/arm/{mach-s3c2410/cpu-freq.c => mach-s3c24xx/cpufreq-s3c2410.c} (98%)
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 68d89cb..910b8d2 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -4,13 +4,6 @@
# cpu frequency scaling support
-config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2410
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
-
config S3C2410_PLLTABLE
bool
depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 6b9a316..2a160a5 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -9,6 +9,5 @@ obj-m :=
obj-n :=
obj- :=
-obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 25df14a..04921b9 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -127,6 +127,13 @@ config S3C2410_PM
if CPU_S3C2410
+config S3C2410_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
config S3C24XX_SIMTEC_NOR
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0ab6ab1..3c9fd51 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -17,6 +17,7 @@ obj- :=
obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
similarity index 98%
rename from arch/arm/mach-s3c2410/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
index 5404535..cfa0dd8 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/cpu-freq.c
- *
+/*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -81,7 +80,7 @@ static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
cfg->divs.p_divisor = pdiv;
cfg->divs.h_divisor = hdiv;
- return 0 ;
+ return 0;
}
static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
@@ -131,7 +130,6 @@ static int __init s3c2410_cpufreq_init(void)
{
return subsys_interface_register(&s3c2410_cpufreq_interface);
}
-
arch_initcall(s3c2410_cpufreq_init);
static int s3c2410a_cpufreq_add(struct device *dev,
@@ -159,5 +157,4 @@ static int __init s3c2410a_cpufreq_init(void)
{
return subsys_interface_register(&s3c2410a_cpufreq_interface);
}
-
arch_initcall(s3c2410a_cpufreq_init);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/6] ARM: S3C24XX: Move mach-s3c2410/ pll into mach-s3c24xx/
2013-01-22 1:12 ` Kukjin Kim
@ 2013-01-22 1:12 ` Kukjin Kim
-1 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Kukjin Kim
This patch moves mach-s3c2410/pll into mach-s3c24xx/
and removes arch/arm/mach-s3c2410/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2410/Kconfig | 13 -------------
arch/arm/mach-s3c2410/Makefile | 13 -------------
arch/arm/mach-s3c24xx/Kconfig | 7 +++++++
arch/arm/mach-s3c24xx/Makefile | 1 +
.../{mach-s3c2410/pll.c => mach-s3c24xx/pll-s3c2410.c} | 5 +----
5 files changed, 9 insertions(+), 30 deletions(-)
delete mode 100644 arch/arm/mach-s3c2410/Kconfig
delete mode 100644 arch/arm/mach-s3c2410/Makefile
rename arch/arm/{mach-s3c2410/pll.c => mach-s3c24xx/pll-s3c2410.c} (99%)
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
deleted file mode 100644
index 910b8d2..0000000
--- a/arch/arm/mach-s3c2410/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_PLLTABLE
- bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
- default y
- help
- Select the PLL table for the S3C2410
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
deleted file mode 100644
index 2a160a5..0000000
--- a/arch/arm/mach-s3c2410/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
-
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 04921b9..5cc740c 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -134,6 +134,13 @@ config S3C2410_CPUFREQ
help
CPU Frequency scaling support for S3C2410
+config S3C2410_PLL
+ bool
+ depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ default y
+ help
+ Select the PLL table for the S3C2410
+
config S3C24XX_SIMTEC_NOR
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 3c9fd51..ecace54 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -19,6 +19,7 @@ obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c
similarity index 99%
rename from arch/arm/mach-s3c2410/pll.c
rename to arch/arm/mach-s3c24xx/pll-s3c2410.c
index e0b3b34..dcf3420 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/pll.c
- *
+/*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -82,7 +81,6 @@ static int __init s3c2410_pll_init(void)
return subsys_interface_register(&s3c2410_plls_interface);
}
-
arch_initcall(s3c2410_pll_init);
static struct subsys_interface s3c2410a_plls_interface = {
@@ -95,5 +93,4 @@ static int __init s3c2410a_pll_init(void)
{
return subsys_interface_register(&s3c2410a_plls_interface);
}
-
arch_initcall(s3c2410a_pll_init);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 2/6] ARM: S3C24XX: Move mach-s3c2410/ pll into mach-s3c24xx/
@ 2013-01-22 1:12 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel
This patch moves mach-s3c2410/pll into mach-s3c24xx/
and removes arch/arm/mach-s3c2410/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2410/Kconfig | 13 -------------
arch/arm/mach-s3c2410/Makefile | 13 -------------
arch/arm/mach-s3c24xx/Kconfig | 7 +++++++
arch/arm/mach-s3c24xx/Makefile | 1 +
.../{mach-s3c2410/pll.c => mach-s3c24xx/pll-s3c2410.c} | 5 +----
5 files changed, 9 insertions(+), 30 deletions(-)
delete mode 100644 arch/arm/mach-s3c2410/Kconfig
delete mode 100644 arch/arm/mach-s3c2410/Makefile
rename arch/arm/{mach-s3c2410/pll.c => mach-s3c24xx/pll-s3c2410.c} (99%)
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
deleted file mode 100644
index 910b8d2..0000000
--- a/arch/arm/mach-s3c2410/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_PLLTABLE
- bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
- default y
- help
- Select the PLL table for the S3C2410
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
deleted file mode 100644
index 2a160a5..0000000
--- a/arch/arm/mach-s3c2410/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
-
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 04921b9..5cc740c 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -134,6 +134,13 @@ config S3C2410_CPUFREQ
help
CPU Frequency scaling support for S3C2410
+config S3C2410_PLL
+ bool
+ depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ default y
+ help
+ Select the PLL table for the S3C2410
+
config S3C24XX_SIMTEC_NOR
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 3c9fd51..ecace54 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -19,6 +19,7 @@ obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c
similarity index 99%
rename from arch/arm/mach-s3c2410/pll.c
rename to arch/arm/mach-s3c24xx/pll-s3c2410.c
index e0b3b34..dcf3420 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/pll.c
- *
+/*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -82,7 +81,6 @@ static int __init s3c2410_pll_init(void)
return subsys_interface_register(&s3c2410_plls_interface);
}
-
arch_initcall(s3c2410_pll_init);
static struct subsys_interface s3c2410a_plls_interface = {
@@ -95,5 +93,4 @@ static int __init s3c2410a_pll_init(void)
{
return subsys_interface_register(&s3c2410a_plls_interface);
}
-
arch_initcall(s3c2410a_pll_init);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/6] ARM: S3C2412: Remove useless codes mach-s3c2412/gpio.c
2013-01-22 1:12 ` Kukjin Kim
@ 2013-01-22 1:12 ` Kukjin Kim
-1 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Kukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2412/gpio.c | 62 -------------------------
arch/arm/mach-s3c24xx/include/mach/hardware.h | 6 ---
2 files changed, 68 deletions(-)
delete mode 100644 arch/arm/mach-s3c2412/gpio.c
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 4526f6b..0000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
- unsigned long flags;
- unsigned long slpcon;
-
- offs *= 2;
-
- if (pin < S3C2410_GPB(0))
- return -EINVAL;
-
- if (pin >= S3C2410_GPF(0) &&
- pin <= S3C2410_GPG(16))
- return -EINVAL;
-
- if (pin > S3C2410_GPH(16))
- return -EINVAL;
-
- local_irq_save(flags);
-
- slpcon = __raw_readl(chip->base + 0x0C);
-
- slpcon &= ~(3 << offs);
- slpcon |= state << offs;
-
- __raw_writel(slpcon, chip->base + 0x0C);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
index aef5631..a6cc14a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h
@@ -23,12 +23,6 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
#endif /* CONFIG_CPU_S3C2440 */
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
#endif /* __ASSEMBLY__ */
#include <asm/sizes.h>
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 3/6] ARM: S3C2412: Remove useless codes mach-s3c2412/gpio.c
@ 2013-01-22 1:12 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2412/gpio.c | 62 -------------------------
arch/arm/mach-s3c24xx/include/mach/hardware.h | 6 ---
2 files changed, 68 deletions(-)
delete mode 100644 arch/arm/mach-s3c2412/gpio.c
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 4526f6b..0000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
- struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
- unsigned long flags;
- unsigned long slpcon;
-
- offs *= 2;
-
- if (pin < S3C2410_GPB(0))
- return -EINVAL;
-
- if (pin >= S3C2410_GPF(0) &&
- pin <= S3C2410_GPG(16))
- return -EINVAL;
-
- if (pin > S3C2410_GPH(16))
- return -EINVAL;
-
- local_irq_save(flags);
-
- slpcon = __raw_readl(chip->base + 0x0C);
-
- slpcon &= ~(3 << offs);
- slpcon |= state << offs;
-
- __raw_writel(slpcon, chip->base + 0x0C);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
index aef5631..a6cc14a 100644
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h
@@ -23,12 +23,6 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
#endif /* CONFIG_CPU_S3C2440 */
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
#endif /* __ASSEMBLY__ */
#include <asm/sizes.h>
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 4/6] ARM: S3C24XX: Move mach-s3c2412/ cpufreq driver into mach-s3c24xx/
2013-01-22 1:12 ` Kukjin Kim
@ 2013-01-22 1:12 ` Kukjin Kim
-1 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Kukjin Kim
This patch moves mach-s3c2412/cpufreq driver into mach-s3c24xx/
and removes arch/arm/mach-s3c2412/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/Kconfig | 1 -
arch/arm/Makefile | 2 +-
arch/arm/mach-s3c2412/Kconfig | 13 -------------
arch/arm/mach-s3c2412/Makefile | 12 ------------
arch/arm/mach-s3c24xx/Kconfig | 8 ++++++++
arch/arm/mach-s3c24xx/Makefile | 1 +
.../cpu-freq.c => mach-s3c24xx/cpufreq-s3c2412.c} | 6 ++----
7 files changed, 12 insertions(+), 31 deletions(-)
delete mode 100644 arch/arm/mach-s3c2412/Kconfig
delete mode 100644 arch/arm/mach-s3c2412/Makefile
rename arch/arm/{mach-s3c2412/cpu-freq.c => mach-s3c24xx/cpufreq-s3c2412.c} (99%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f95ba14..5d566bf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1095,7 +1095,6 @@ source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
if ARCH_S3C24XX
-source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 30c443c..29e8fae 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_PRIMA2) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_RPC) += rpc
-machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2440
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
deleted file mode 100644
index 495f692..0000000
--- a/arch/arm/mach-s3c2412/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Note, the S3C2412 IOtiming support is in plat-s3c24xx
-
-config S3C2412_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2412
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
deleted file mode 100644
index 41a6c27..0000000
--- a/arch/arm/mach-s3c2412/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# arch/arm/mach-s3c2412/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5cc740c..f1d3951 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -280,6 +280,14 @@ config CPU_S3C2412_ONLY
!CPU_S3C2443 && CPU_S3C2412
default y
+config S3C2412_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+ default y
+ select S3C2412_IOTIMING
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
config S3C2412_DMA
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index ecace54..0f042d1 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
similarity index 99%
rename from arch/arm/mach-s3c2412/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
index 125be7d..c8f05f3 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/cpu-freq.c
- *
+/*
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,7 @@ static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
return 0;
- invalid:
+invalid:
return -EINVAL;
}
@@ -255,5 +254,4 @@ static int s3c2412_cpufreq_init(void)
{
return subsys_interface_register(&s3c2412_cpufreq_interface);
}
-
arch_initcall(s3c2412_cpufreq_init);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 4/6] ARM: S3C24XX: Move mach-s3c2412/ cpufreq driver into mach-s3c24xx/
@ 2013-01-22 1:12 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel
This patch moves mach-s3c2412/cpufreq driver into mach-s3c24xx/
and removes arch/arm/mach-s3c2412/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/Kconfig | 1 -
arch/arm/Makefile | 2 +-
arch/arm/mach-s3c2412/Kconfig | 13 -------------
arch/arm/mach-s3c2412/Makefile | 12 ------------
arch/arm/mach-s3c24xx/Kconfig | 8 ++++++++
arch/arm/mach-s3c24xx/Makefile | 1 +
.../cpu-freq.c => mach-s3c24xx/cpufreq-s3c2412.c} | 6 ++----
7 files changed, 12 insertions(+), 31 deletions(-)
delete mode 100644 arch/arm/mach-s3c2412/Kconfig
delete mode 100644 arch/arm/mach-s3c2412/Makefile
rename arch/arm/{mach-s3c2412/cpu-freq.c => mach-s3c24xx/cpufreq-s3c2412.c} (99%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f95ba14..5d566bf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1095,7 +1095,6 @@ source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
if ARCH_S3C24XX
-source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 30c443c..29e8fae 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_PRIMA2) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_RPC) += rpc
-machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2440
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
deleted file mode 100644
index 495f692..0000000
--- a/arch/arm/mach-s3c2412/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Note, the S3C2412 IOtiming support is in plat-s3c24xx
-
-config S3C2412_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2412
- default y
- select S3C2412_IOTIMING
- help
- CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
deleted file mode 100644
index 41a6c27..0000000
--- a/arch/arm/mach-s3c2412/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# arch/arm/mach-s3c2412/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 5cc740c..f1d3951 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -280,6 +280,14 @@ config CPU_S3C2412_ONLY
!CPU_S3C2443 && CPU_S3C2412
default y
+config S3C2412_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+ default y
+ select S3C2412_IOTIMING
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
config S3C2412_DMA
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index ecace54..0f042d1 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
similarity index 99%
rename from arch/arm/mach-s3c2412/cpu-freq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
index 125be7d..c8f05f3 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/cpu-freq.c
- *
+/*
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,7 @@ static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
return 0;
- invalid:
+invalid:
return -EINVAL;
}
@@ -255,5 +254,4 @@ static int s3c2412_cpufreq_init(void)
{
return subsys_interface_register(&s3c2412_cpufreq_interface);
}
-
arch_initcall(s3c2412_cpufreq_init);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 5/6] ARM: S3C24XX: Move mach-s3c2440/ cpufreq driver into mach-s3c24xx/
2013-01-22 1:12 ` Kukjin Kim
@ 2013-01-22 1:12 ` Kukjin Kim
-1 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Kukjin Kim
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2440/Kconfig | 8 --------
arch/arm/mach-s3c2440/Makefile | 2 --
arch/arm/mach-s3c24xx/Kconfig | 8 ++++++++
arch/arm/mach-s3c24xx/Makefile | 1 +
.../s3c2440-cpufreq.c => mach-s3c24xx/cpufreq-s3c2440.c} | 4 +---
5 files changed, 10 insertions(+), 13 deletions(-)
rename arch/arm/{mach-s3c2440/s3c2440-cpufreq.c => mach-s3c24xx/cpufreq-s3c2440.c} (99%)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a4d7fd2..ad06fa2 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -2,14 +2,6 @@
#
# Licensed under GPLv2
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- default y
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
config S3C2440_XTAL_12000000
bool
help
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 0ddd17f..d76e4b9 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -9,7 +9,5 @@ obj-m :=
obj-n :=
obj- :=
-obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
-
obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index f1d3951..edf6549 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -387,6 +387,14 @@ endif # CPU_S3C2416
if CPU_S3C2440
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ default y
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
config S3C2440_DMA
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0f042d1..6d4b9ad 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
similarity index 99%
rename from arch/arm/mach-s3c2440/s3c2440-cpufreq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
index 6177676..72b2cc8 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
- *
+/*
* Copyright (c) 2006-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -310,5 +309,4 @@ static int s3c2442_cpufreq_init(void)
{
return subsys_interface_register(&s3c2442_cpufreq_interface);
}
-
subsys_initcall(s3c2442_cpufreq_init);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 5/6] ARM: S3C24XX: Move mach-s3c2440/ cpufreq driver into mach-s3c24xx/
@ 2013-01-22 1:12 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-s3c2440/Kconfig | 8 --------
arch/arm/mach-s3c2440/Makefile | 2 --
arch/arm/mach-s3c24xx/Kconfig | 8 ++++++++
arch/arm/mach-s3c24xx/Makefile | 1 +
.../s3c2440-cpufreq.c => mach-s3c24xx/cpufreq-s3c2440.c} | 4 +---
5 files changed, 10 insertions(+), 13 deletions(-)
rename arch/arm/{mach-s3c2440/s3c2440-cpufreq.c => mach-s3c24xx/cpufreq-s3c2440.c} (99%)
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a4d7fd2..ad06fa2 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -2,14 +2,6 @@
#
# Licensed under GPLv2
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- default y
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
config S3C2440_XTAL_12000000
bool
help
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 0ddd17f..d76e4b9 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -9,7 +9,5 @@ obj-m :=
obj-n :=
obj- :=
-obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
-
obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index f1d3951..edf6549 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -387,6 +387,14 @@ endif # CPU_S3C2416
if CPU_S3C2440
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ default y
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
config S3C2440_DMA
bool
help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0f042d1..6d4b9ad 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
similarity index 99%
rename from arch/arm/mach-s3c2440/s3c2440-cpufreq.c
rename to arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
index 6177676..72b2cc8 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
- *
+/*
* Copyright (c) 2006-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -310,5 +309,4 @@ static int s3c2442_cpufreq_init(void)
{
return subsys_interface_register(&s3c2442_cpufreq_interface);
}
-
subsys_initcall(s3c2442_cpufreq_init);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 6/6] ARM: S3C24XX: Move mach-s3c2440/ pll into mach-s3c24xx/
2013-01-22 1:12 ` Kukjin Kim
@ 2013-01-22 1:12 ` Kukjin Kim
-1 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: Kukjin Kim
This patch moves mach-s3c2440/pll into mach-s3c24xx/
and removes arch/arm/mach-s3c2440/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/Kconfig | 3 --
arch/arm/Makefile | 2 +-
arch/arm/mach-s3c2440/Kconfig | 29 --------------------
arch/arm/mach-s3c2440/Makefile | 13 ---------
arch/arm/mach-s3c24xx/Kconfig | 26 ++++++++++++++++++
arch/arm/mach-s3c24xx/Makefile | 2 ++
.../pll-s3c2440-12000000.c} | 5 +---
.../pll-s3c2440-16934400.c} | 5 +---
8 files changed, 31 insertions(+), 54 deletions(-)
delete mode 100644 arch/arm/mach-s3c2440/Kconfig
delete mode 100644 arch/arm/mach-s3c2440/Makefile
rename arch/arm/{mach-s3c2440/s3c2440-pll-12000000.c => mach-s3c24xx/pll-s3c2440-12000000.c} (98%)
rename arch/arm/{mach-s3c2440/s3c2440-pll-16934400.c => mach-s3c24xx/pll-s3c2440-16934400.c} (99%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5d566bf..f22c510 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1094,9 +1094,6 @@ source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
-if ARCH_S3C24XX
-source "arch/arm/mach-s3c2440/Kconfig"
-endif
if ARCH_S3C64XX
source "arch/arm/mach-s3c64xx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 29e8fae..0935dac 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_PRIMA2) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_RPC) += rpc
-machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2440
+machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
deleted file mode 100644
index ad06fa2..0000000
--- a/arch/arm/mach-s3c2440/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config S3C2440_XTAL_12000000
- bool
- help
- Indicate that the build needs to support 12MHz system
- crystal.
-
-config S3C2440_XTAL_16934400
- bool
- help
- Indicate that the build needs to support 16.9344MHz system
- crystal.
-
-config S3C2440_PLL_12000000
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
deleted file mode 100644
index d76e4b9..0000000
--- a/arch/arm/mach-s3c2440/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# arch/arm/mach-s3c2440/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index edf6549..67df58b 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -400,6 +400,32 @@ config S3C2440_DMA
help
Support for S3C2440 specific DMA code5A
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
comment "S3C2440 Boards"
#
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 6d4b9ad..08b87cd 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -36,6 +36,8 @@ obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
similarity index 98%
rename from arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
rename to arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index 551fb43..6737817 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
- *
+/*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -83,7 +82,6 @@ static int __init s3c2440_pll_12mhz(void)
return subsys_interface_register(&s3c2440_plls12_interface);
}
-
arch_initcall(s3c2440_pll_12mhz);
static struct subsys_interface s3c2442_plls12_interface = {
@@ -97,5 +95,4 @@ static int __init s3c2442_pll_12mhz(void)
return subsys_interface_register(&s3c2442_plls12_interface);
}
-
arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
similarity index 99%
rename from arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
rename to arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index 3f15bcf..debfa10 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
- *
+/*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,6 @@ static int __init s3c2440_pll_16934400(void)
{
return subsys_interface_register(&s3c2440_plls169344_interface);
}
-
arch_initcall(s3c2440_pll_16934400);
static struct subsys_interface s3c2442_plls169344_interface = {
@@ -124,5 +122,4 @@ static int __init s3c2442_pll_16934400(void)
{
return subsys_interface_register(&s3c2442_plls169344_interface);
}
-
arch_initcall(s3c2442_pll_16934400);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 6/6] ARM: S3C24XX: Move mach-s3c2440/ pll into mach-s3c24xx/
@ 2013-01-22 1:12 ` Kukjin Kim
0 siblings, 0 replies; 14+ messages in thread
From: Kukjin Kim @ 2013-01-22 1:12 UTC (permalink / raw)
To: linux-arm-kernel
This patch moves mach-s3c2440/pll into mach-s3c24xx/
and removes arch/arm/mach-s3c2440/ directory in kernel.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/Kconfig | 3 --
arch/arm/Makefile | 2 +-
arch/arm/mach-s3c2440/Kconfig | 29 --------------------
arch/arm/mach-s3c2440/Makefile | 13 ---------
arch/arm/mach-s3c24xx/Kconfig | 26 ++++++++++++++++++
arch/arm/mach-s3c24xx/Makefile | 2 ++
.../pll-s3c2440-12000000.c} | 5 +---
.../pll-s3c2440-16934400.c} | 5 +---
8 files changed, 31 insertions(+), 54 deletions(-)
delete mode 100644 arch/arm/mach-s3c2440/Kconfig
delete mode 100644 arch/arm/mach-s3c2440/Makefile
rename arch/arm/{mach-s3c2440/s3c2440-pll-12000000.c => mach-s3c24xx/pll-s3c2440-12000000.c} (98%)
rename arch/arm/{mach-s3c2440/s3c2440-pll-16934400.c => mach-s3c24xx/pll-s3c2440-16934400.c} (99%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5d566bf..f22c510 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1094,9 +1094,6 @@ source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
-if ARCH_S3C24XX
-source "arch/arm/mach-s3c2440/Kconfig"
-endif
if ARCH_S3C64XX
source "arch/arm/mach-s3c64xx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 29e8fae..0935dac 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_PRIMA2) += prima2
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_RPC) += rpc
-machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2440
+machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx
machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
deleted file mode 100644
index ad06fa2..0000000
--- a/arch/arm/mach-s3c2440/Kconfig
+++ /dev/null
@@ -1,29 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config S3C2440_XTAL_12000000
- bool
- help
- Indicate that the build needs to support 12MHz system
- crystal.
-
-config S3C2440_XTAL_16934400
- bool
- help
- Indicate that the build needs to support 16.9344MHz system
- crystal.
-
-config S3C2440_PLL_12000000
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
deleted file mode 100644
index d76e4b9..0000000
--- a/arch/arm/mach-s3c2440/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-# arch/arm/mach-s3c2440/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index edf6549..67df58b 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -400,6 +400,32 @@ config S3C2440_DMA
help
Support for S3C2440 specific DMA code5A
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
comment "S3C2440 Boards"
#
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 6d4b9ad..08b87cd 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -36,6 +36,8 @@ obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
similarity index 98%
rename from arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
rename to arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index 551fb43..6737817 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
- *
+/*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -83,7 +82,6 @@ static int __init s3c2440_pll_12mhz(void)
return subsys_interface_register(&s3c2440_plls12_interface);
}
-
arch_initcall(s3c2440_pll_12mhz);
static struct subsys_interface s3c2442_plls12_interface = {
@@ -97,5 +95,4 @@ static int __init s3c2442_pll_12mhz(void)
return subsys_interface_register(&s3c2442_plls12_interface);
}
-
arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
similarity index 99%
rename from arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
rename to arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index 3f15bcf..debfa10 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
- *
+/*
* Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,6 @@ static int __init s3c2440_pll_16934400(void)
{
return subsys_interface_register(&s3c2440_plls169344_interface);
}
-
arch_initcall(s3c2440_pll_16934400);
static struct subsys_interface s3c2442_plls169344_interface = {
@@ -124,5 +122,4 @@ static int __init s3c2442_pll_16934400(void)
{
return subsys_interface_register(&s3c2442_plls169344_interface);
}
-
arch_initcall(s3c2442_pll_16934400);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 14+ messages in thread