[GIT PULL] Renesas ARM-based SoC for v3.8 #2

[GIT PULL] Renesas ARM-based SoC for v3.8 #2

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following SoC enhancements for 3.8.

This series is based on the previous SoC series that I sent on Tuesday
and was merged later that day: [GIT PULL v4] Renesas ARM-based SoC for v3.8

----------------------------------------------------------------
The following changes since commit 86bc52ef4373be64867b56f3a9e30cbabf64e0dd:

  ARM: shmobile: r8a7740: Enable PMU (2012-11-06 13:47:24 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc

for you to fetch changes up to 9d69f5b87e7f6df51ad2a70557474093de934a8c:

  ARM: shmobile: r8a7779: add USB OHCI clock support (2012-11-07 17:11:48 +0900)

----------------------------------------------------------------
Kuninori Morimoto (4):
      ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx
      ARM: shmobile: r8a7740: add USB24 clock explain
      ARM: shmobile: r8a7779: add USB EHCI clock support
      ARM: shmobile: r8a7779: add USB OHCI clock support

 arch/arm/mach-shmobile/clock-r8a7740.c        |   16 ++++++++++++++++
 arch/arm/mach-shmobile/clock-r8a7779.c        |    7 +++++++
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 +-
 arch/arm/mach-shmobile/pfc-r8a7779.c          |   16 ++++++++--------
 4 files changed, 32 insertions(+), 9 deletions(-)

[GIT PULL] Renesas ARM-based SoC for v3.8 #2

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following SoC enhancements for 3.8.

This series is based on the previous SoC series that I sent on Tuesday
and was merged later that day: [GIT PULL v4] Renesas ARM-based SoC for v3.8

----------------------------------------------------------------
The following changes since commit 86bc52ef4373be64867b56f3a9e30cbabf64e0dd:

  ARM: shmobile: r8a7740: Enable PMU (2012-11-06 13:47:24 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc

for you to fetch changes up to 9d69f5b87e7f6df51ad2a70557474093de934a8c:

  ARM: shmobile: r8a7779: add USB OHCI clock support (2012-11-07 17:11:48 +0900)

----------------------------------------------------------------
Kuninori Morimoto (4):
      ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx
      ARM: shmobile: r8a7740: add USB24 clock explain
      ARM: shmobile: r8a7779: add USB EHCI clock support
      ARM: shmobile: r8a7779: add USB OHCI clock support

 arch/arm/mach-shmobile/clock-r8a7740.c        |   16 ++++++++++++++++
 arch/arm/mach-shmobile/clock-r8a7779.c        |    7 +++++++
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 +-
 arch/arm/mach-shmobile/pfc-r8a7779.c          |   16 ++++++++--------
 4 files changed, 32 insertions(+), 9 deletions(-)

[PATCH 1/4] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

PENCx is Power Enable Control pin for USB.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 +-
 arch/arm/mach-shmobile/pfc-r8a7779.c          |   16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 499f52d..8ab0cd6 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -71,7 +71,7 @@ enum {
 	GPIO_FN_A19,
 
 	/* IPSR0 */
-	GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
+	GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
 	GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2,
 	GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF,
 	GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3,
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index cbc26ba..9513234 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -140,7 +140,7 @@ enum {
 	FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10,
 	FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12,
 	FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4,
-	FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1,
+	FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1,
 	FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19,
 
 	/* GPSR5 */
@@ -176,7 +176,7 @@ enum {
 	FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3,
 	FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 	FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
-	FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+	FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 	FN_SCIF_CLK, FN_TCLK0_C,
 
 	/* IPSR1 */
@@ -447,7 +447,7 @@ enum {
 	A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK,
 	BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK,
 	ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK,
-	PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
+	USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
 	SCIF_CLK_MARK, TCLK0_C_MARK,
 
 	EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK,
@@ -658,7 +658,7 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(A18_MARK, FN_A18),
 	PINMUX_DATA(A19_MARK, FN_A19),
 
-	PINMUX_IPSR_DATA(IP0_2_0, PENC2),
+	PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0),
 	PINMUX_IPSR_DATA(IP0_2_0, PWM1),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0),
@@ -1456,7 +1456,7 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(A19),
 
 	/* IPSR0 */
-	GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
+	GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
 	GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2),
 	GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF),
 	GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3),
@@ -1865,8 +1865,8 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		GP_4_30_FN, FN_IP8_18,
 		GP_4_29_FN, FN_IP8_17_16,
 		GP_4_28_FN, FN_IP0_2_0,
-		GP_4_27_FN, FN_PENC1,
-		GP_4_26_FN, FN_PENC0,
+		GP_4_27_FN, FN_USB_PENC1,
+		GP_4_26_FN, FN_USB_PENC0,
 		GP_4_25_FN, FN_IP8_15_12,
 		GP_4_24_FN, FN_IP8_11_8,
 		GP_4_23_FN, FN_IP8_7_4,
@@ -1981,7 +1981,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 		FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
 		/* IP0_2_0 [3] */
-		FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+		FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 		FN_SCIF_CLK, FN_TCLK0_C, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32,
-- 
1.7.10.4

[PATCH 1/4] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

PENCx is Power Enable Control pin for USB.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 +-
 arch/arm/mach-shmobile/pfc-r8a7779.c          |   16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 499f52d..8ab0cd6 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -71,7 +71,7 @@ enum {
 	GPIO_FN_A19,
 
 	/* IPSR0 */
-	GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
+	GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
 	GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2,
 	GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF,
 	GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3,
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index cbc26ba..9513234 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -140,7 +140,7 @@ enum {
 	FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10,
 	FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12,
 	FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4,
-	FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1,
+	FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1,
 	FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19,
 
 	/* GPSR5 */
@@ -176,7 +176,7 @@ enum {
 	FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3,
 	FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 	FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
-	FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+	FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 	FN_SCIF_CLK, FN_TCLK0_C,
 
 	/* IPSR1 */
@@ -447,7 +447,7 @@ enum {
 	A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK,
 	BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK,
 	ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK,
-	PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
+	USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
 	SCIF_CLK_MARK, TCLK0_C_MARK,
 
 	EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK,
@@ -658,7 +658,7 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(A18_MARK, FN_A18),
 	PINMUX_DATA(A19_MARK, FN_A19),
 
-	PINMUX_IPSR_DATA(IP0_2_0, PENC2),
+	PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0),
 	PINMUX_IPSR_DATA(IP0_2_0, PWM1),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0),
@@ -1456,7 +1456,7 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(A19),
 
 	/* IPSR0 */
-	GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
+	GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
 	GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2),
 	GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF),
 	GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3),
@@ -1865,8 +1865,8 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		GP_4_30_FN, FN_IP8_18,
 		GP_4_29_FN, FN_IP8_17_16,
 		GP_4_28_FN, FN_IP0_2_0,
-		GP_4_27_FN, FN_PENC1,
-		GP_4_26_FN, FN_PENC0,
+		GP_4_27_FN, FN_USB_PENC1,
+		GP_4_26_FN, FN_USB_PENC0,
 		GP_4_25_FN, FN_IP8_15_12,
 		GP_4_24_FN, FN_IP8_11_8,
 		GP_4_23_FN, FN_IP8_7_4,
@@ -1981,7 +1981,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 		FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
 		/* IP0_2_0 [3] */
-		FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+		FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 		FN_SCIF_CLK, FN_TCLK0_C, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32,
-- 
1.7.10.4

[PATCH 2/4] ARM: shmobile: r8a7740: add USB24 clock explain

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

USBCKCR is controlling USB parent clock and divide rate.
This parent clock is used as a "usb24s" from other devices,
but the "divide rate" is not used.
Further, this clock itself is known as "usb24".
So, to set this clock is a little confusable.
This patch adds quick explain and sample settings for this clock.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 6729e00..c012bbf 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -188,6 +188,22 @@ static struct clk pllc1_div2_clk = {
 };
 
 /* USB clock */
+/*
+ * USBCKCR is controlling usb24 clock
+ * bit[7] : parent clock
+ * bit[6] : clock divide rate
+ * And this bit[7] is used as a "usb24s" from other devices.
+ * (Video clock / Sub clock / SPU clock)
+ * You can controll this clock as a below.
+ *
+ * struct clk *usb24	= clk_get(dev,  "usb24");
+ * struct clk *usb24s	= clk_get(NULL, "usb24s");
+ * struct clk *system	= clk_get(NULL, "system_clk");
+ * int rate = clk_get_rate(system);
+ *
+ * clk_set_parent(usb24s, system);  // for bit[7]
+ * clk_set_rate(usb24, rate / 2);   // for bit[6]
+ */
 static struct clk *usb24s_parents[] = {
 	[0] = &system_clk,
 	[1] = &extal2_clk
-- 
1.7.10.4

[PATCH 2/4] ARM: shmobile: r8a7740: add USB24 clock explain

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

USBCKCR is controlling USB parent clock and divide rate.
This parent clock is used as a "usb24s" from other devices,
but the "divide rate" is not used.
Further, this clock itself is known as "usb24".
So, to set this clock is a little confusable.
This patch adds quick explain and sample settings for this clock.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 6729e00..c012bbf 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -188,6 +188,22 @@ static struct clk pllc1_div2_clk = {
 };
 
 /* USB clock */
+/*
+ * USBCKCR is controlling usb24 clock
+ * bit[7] : parent clock
+ * bit[6] : clock divide rate
+ * And this bit[7] is used as a "usb24s" from other devices.
+ * (Video clock / Sub clock / SPU clock)
+ * You can controll this clock as a below.
+ *
+ * struct clk *usb24	= clk_get(dev,  "usb24");
+ * struct clk *usb24s	= clk_get(NULL, "usb24s");
+ * struct clk *system	= clk_get(NULL, "system_clk");
+ * int rate = clk_get_rate(system);
+ *
+ * clk_set_parent(usb24s, system);  // for bit[7]
+ * clk_set_rate(usb24, rate / 2);   // for bit[6]
+ */
 static struct clk *usb24s_parents[] = {
 	[0] = &system_clk,
 	[1] = &extal2_clk
-- 
1.7.10.4

[PATCH 3/4] ARM: shmobile: r8a7779: add USB EHCI clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

ehci-platform driver require these clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 24f5a84..4ba4e3c 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -87,6 +87,7 @@ static struct clk div4_clks[DIV4_NR] = {
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
+	MSTP101, MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015, MSTP014,
@@ -98,6 +99,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1,  1, 0), /* USB2 */
+	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1,  0, 0), /* USB0/1 */
 	[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
 	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */
 	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */
@@ -153,6 +156,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("peripheral_clk",	&div4_clks[DIV4_P]),
 
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
+	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-- 
1.7.10.4

[PATCH 3/4] ARM: shmobile: r8a7779: add USB EHCI clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

ehci-platform driver require these clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 24f5a84..4ba4e3c 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -87,6 +87,7 @@ static struct clk div4_clks[DIV4_NR] = {
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
+	MSTP101, MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015, MSTP014,
@@ -98,6 +99,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1,  1, 0), /* USB2 */
+	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1,  0, 0), /* USB0/1 */
 	[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
 	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */
 	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */
@@ -153,6 +156,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("peripheral_clk",	&div4_clks[DIV4_P]),
 
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
+	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-- 
1.7.10.4

[PATCH 4/4] ARM: shmobile: r8a7779: add USB OHCI clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

ohci-platform driver require these clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 4ba4e3c..be885cf 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -157,7 +157,9 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
+	CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
+	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-- 
1.7.10.4

[PATCH 4/4] ARM: shmobile: r8a7779: add USB OHCI clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

ohci-platform driver require these clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 4ba4e3c..be885cf 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -157,7 +157,9 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
+	CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
+	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-- 
1.7.10.4

Re: [GIT PULL] Renesas ARM-based SoC for v3.8 #2

[Simon Horman]

On Wed, Nov 07, 2012 at 05:34:54PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following SoC enhancements for 3.8.
> 
> This series is based on the previous SoC series that I sent on Tuesday
> and was merged later that day: [GIT PULL v4] Renesas ARM-based SoC for v3.8


I have found some problems with this pull-request,
I will send an revised one.

> ----------------------------------------------------------------
> The following changes since commit 86bc52ef4373be64867b56f3a9e30cbabf64e0dd:
> 
>   ARM: shmobile: r8a7740: Enable PMU (2012-11-06 13:47:24 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc
> 
> for you to fetch changes up to 9d69f5b87e7f6df51ad2a70557474093de934a8c:
> 
>   ARM: shmobile: r8a7779: add USB OHCI clock support (2012-11-07 17:11:48 +0900)
> 
> ----------------------------------------------------------------
> Kuninori Morimoto (4):
>       ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx
>       ARM: shmobile: r8a7740: add USB24 clock explain
>       ARM: shmobile: r8a7779: add USB EHCI clock support
>       ARM: shmobile: r8a7779: add USB OHCI clock support
> 
>  arch/arm/mach-shmobile/clock-r8a7740.c        |   16 ++++++++++++++++
>  arch/arm/mach-shmobile/clock-r8a7779.c        |    7 +++++++
>  arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 +-
>  arch/arm/mach-shmobile/pfc-r8a7779.c          |   16 ++++++++--------
>  4 files changed, 32 insertions(+), 9 deletions(-)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[GIT PULL] Renesas ARM-based SoC for v3.8 #2

[Simon Horman]

On Wed, Nov 07, 2012 at 05:34:54PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following SoC enhancements for 3.8.
> 
> This series is based on the previous SoC series that I sent on Tuesday
> and was merged later that day: [GIT PULL v4] Renesas ARM-based SoC for v3.8


I have found some problems with this pull-request,
I will send an revised one.

> ----------------------------------------------------------------
> The following changes since commit 86bc52ef4373be64867b56f3a9e30cbabf64e0dd:
> 
>   ARM: shmobile: r8a7740: Enable PMU (2012-11-06 13:47:24 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc
> 
> for you to fetch changes up to 9d69f5b87e7f6df51ad2a70557474093de934a8c:
> 
>   ARM: shmobile: r8a7779: add USB OHCI clock support (2012-11-07 17:11:48 +0900)
> 
> ----------------------------------------------------------------
> Kuninori Morimoto (4):
>       ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx
>       ARM: shmobile: r8a7740: add USB24 clock explain
>       ARM: shmobile: r8a7779: add USB EHCI clock support
>       ARM: shmobile: r8a7779: add USB OHCI clock support
> 
>  arch/arm/mach-shmobile/clock-r8a7740.c        |   16 ++++++++++++++++
>  arch/arm/mach-shmobile/clock-r8a7779.c        |    7 +++++++
>  arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 +-
>  arch/arm/mach-shmobile/pfc-r8a7779.c          |   16 ++++++++--------
>  4 files changed, 32 insertions(+), 9 deletions(-)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[GIT PULL] Renesas ARM-based SoC for v3.8 #4

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following SoC fixes for 3.8.
Its a little embarrassing, but they all fix problems introduced
in previous pull-requests for 3.8 that have been merged.

* The three Revert patches back-out secondary CPU initialisation
  changes from Bastian Hecht which he as advised me are incorrect
  and break secondary CPU initialisation.

* The clkfwk patch from Morimoto-san resolves a build warning.

This pull-request is based on the renesas/soc3 branch in the arm-soc tree.

----------------------------------------------------------------
The following changes since commit d5b689089d7db3851c4d5d6b3727d22ef44d2023:

  ARM: shmobile: sh7372: sh7372_fsiXck_clk become non-global (2012-11-08 17:52:35 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc4

for you to fetch changes up to 94091c6b9498116abe3035137d8c3e707528efd0:

  sh: clkfwk: fixup unsed variable warning (2012-11-13 11:45:40 +0900)

----------------------------------------------------------------
Kuninori Morimoto (1):
      sh: clkfwk: fixup unsed variable warning

Simon Horman (3):
      Revert "ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode"
      Revert "ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode"
      Revert "ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode"

 arch/arm/mach-shmobile/smp-emev2.c   |   22 ++++++++++++++++++++--
 arch/arm/mach-shmobile/smp-r8a7779.c |   25 ++++++++++++++++++++++---
 arch/arm/mach-shmobile/smp-sh73a0.c  |   23 +++++++++++++++++++++--
 drivers/sh/clk/cpg.c                 |    1 -
 4 files changed, 63 insertions(+), 8 deletions(-)

[GIT PULL] Renesas ARM-based SoC for v3.8 #4

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following SoC fixes for 3.8.
Its a little embarrassing, but they all fix problems introduced
in previous pull-requests for 3.8 that have been merged.

* The three Revert patches back-out secondary CPU initialisation
  changes from Bastian Hecht which he as advised me are incorrect
  and break secondary CPU initialisation.

* The clkfwk patch from Morimoto-san resolves a build warning.

This pull-request is based on the renesas/soc3 branch in the arm-soc tree.

----------------------------------------------------------------
The following changes since commit d5b689089d7db3851c4d5d6b3727d22ef44d2023:

  ARM: shmobile: sh7372: sh7372_fsiXck_clk become non-global (2012-11-08 17:52:35 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc4

for you to fetch changes up to 94091c6b9498116abe3035137d8c3e707528efd0:

  sh: clkfwk: fixup unsed variable warning (2012-11-13 11:45:40 +0900)

----------------------------------------------------------------
Kuninori Morimoto (1):
      sh: clkfwk: fixup unsed variable warning

Simon Horman (3):
      Revert "ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode"
      Revert "ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode"
      Revert "ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode"

 arch/arm/mach-shmobile/smp-emev2.c   |   22 ++++++++++++++++++++--
 arch/arm/mach-shmobile/smp-r8a7779.c |   25 ++++++++++++++++++++++---
 arch/arm/mach-shmobile/smp-sh73a0.c  |   23 +++++++++++++++++++++--
 drivers/sh/clk/cpg.c                 |    1 -
 4 files changed, 63 insertions(+), 8 deletions(-)

[PATCH 1/4] Revert "ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode"

[Simon Horman]

This reverts commit 865d90f80384d62e6fbe835159cb674dec32ccb5.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/smp-emev2.c |   22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 535426c..f674562 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -32,8 +32,24 @@
 
 #define EMEV2_SCU_BASE 0x1e000000
 
+static DEFINE_SPINLOCK(scu_lock);
 static void __iomem *scu_base;
 
+static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
+{
+	unsigned long tmp;
+
+	/* we assume this code is running on a different cpu
+	 * than the one that is changing coherency setting */
+	spin_lock(&scu_lock);
+	tmp = readl(scu_base + 8);
+	tmp &= ~clr;
+	tmp |= set;
+	writel(tmp, scu_base + 8);
+	spin_unlock(&scu_lock);
+
+}
+
 static unsigned int __init emev2_get_core_count(void)
 {
 	if (!scu_base) {
@@ -79,7 +95,7 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *
 	cpu = cpu_logical_map(cpu);
 
 	/* enable cache coherency */
-	scu_power_mode(scu_base, 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
 	/* Tell ROM loader about our vector (in headsmp.S) */
 	emev2_set_boot_vector(__pa(shmobile_secondary_vector));
@@ -90,10 +106,12 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *
 
 static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
+	int cpu = cpu_logical_map(0);
+
 	scu_enable(scu_base);
 
 	/* enable cache coherency on CPU0 */
-	scu_power_mode(scu_base, 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 }
 
 static void __init emev2_smp_init_cpus(void)
-- 
1.7.10.4

[PATCH 1/4] Revert "ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode"

[Simon Horman]

This reverts commit 865d90f80384d62e6fbe835159cb674dec32ccb5.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/smp-emev2.c |   22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 535426c..f674562 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -32,8 +32,24 @@
 
 #define EMEV2_SCU_BASE 0x1e000000
 
+static DEFINE_SPINLOCK(scu_lock);
 static void __iomem *scu_base;
 
+static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
+{
+	unsigned long tmp;
+
+	/* we assume this code is running on a different cpu
+	 * than the one that is changing coherency setting */
+	spin_lock(&scu_lock);
+	tmp = readl(scu_base + 8);
+	tmp &= ~clr;
+	tmp |= set;
+	writel(tmp, scu_base + 8);
+	spin_unlock(&scu_lock);
+
+}
+
 static unsigned int __init emev2_get_core_count(void)
 {
 	if (!scu_base) {
@@ -79,7 +95,7 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *
 	cpu = cpu_logical_map(cpu);
 
 	/* enable cache coherency */
-	scu_power_mode(scu_base, 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
 	/* Tell ROM loader about our vector (in headsmp.S) */
 	emev2_set_boot_vector(__pa(shmobile_secondary_vector));
@@ -90,10 +106,12 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *
 
 static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
+	int cpu = cpu_logical_map(0);
+
 	scu_enable(scu_base);
 
 	/* enable cache coherency on CPU0 */
-	scu_power_mode(scu_base, 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 }
 
 static void __init emev2_smp_init_cpus(void)
-- 
1.7.10.4

[PATCH 2/4] Revert "ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode"

[Simon Horman]

This reverts commit e721295185535ed6ef4711eba156fbf5c24f9c5e.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/smp-sh73a0.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 96ddb97..624f00f 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -41,6 +41,9 @@ static void __iomem *scu_base_addr(void)
 	return (void __iomem *)0xf0000000;
 }
 
+static DEFINE_SPINLOCK(scu_lock);
+static unsigned long tmp;
+
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 void __init sh73a0_register_twd(void)
@@ -49,6 +52,20 @@ void __init sh73a0_register_twd(void)
 }
 #endif
 
+static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
+{
+	void __iomem *scu_base = scu_base_addr();
+
+	spin_lock(&scu_lock);
+	tmp = __raw_readl(scu_base + 8);
+	tmp &= ~clr;
+	tmp |= set;
+	spin_unlock(&scu_lock);
+
+	/* disable cache coherency after releasing the lock */
+	__raw_writel(tmp, scu_base + 8);
+}
+
 static unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -66,7 +83,7 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 	cpu = cpu_logical_map(cpu);
 
 	/* enable cache coherency */
-	scu_power_mode(scu_base_addr(), 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
 	if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) = 3)
 		__raw_writel(1 << cpu, WUPCR);	/* wake up */
@@ -78,6 +95,8 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
+	int cpu = cpu_logical_map(0);
+
 	scu_enable(scu_base_addr());
 
 	/* Map the reset vector (in headsmp.S) */
@@ -85,7 +104,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(__pa(shmobile_secondary_vector), SBAR);
 
 	/* enable cache coherency on CPU0 */
-	scu_power_mode(scu_base_addr(), 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 }
 
 static void __init sh73a0_smp_init_cpus(void)
-- 
1.7.10.4

[PATCH 2/4] Revert "ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode"

[Simon Horman]

This reverts commit e721295185535ed6ef4711eba156fbf5c24f9c5e.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/smp-sh73a0.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 96ddb97..624f00f 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -41,6 +41,9 @@ static void __iomem *scu_base_addr(void)
 	return (void __iomem *)0xf0000000;
 }
 
+static DEFINE_SPINLOCK(scu_lock);
+static unsigned long tmp;
+
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 void __init sh73a0_register_twd(void)
@@ -49,6 +52,20 @@ void __init sh73a0_register_twd(void)
 }
 #endif
 
+static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
+{
+	void __iomem *scu_base = scu_base_addr();
+
+	spin_lock(&scu_lock);
+	tmp = __raw_readl(scu_base + 8);
+	tmp &= ~clr;
+	tmp |= set;
+	spin_unlock(&scu_lock);
+
+	/* disable cache coherency after releasing the lock */
+	__raw_writel(tmp, scu_base + 8);
+}
+
 static unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -66,7 +83,7 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 	cpu = cpu_logical_map(cpu);
 
 	/* enable cache coherency */
-	scu_power_mode(scu_base_addr(), 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
 	if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, WUPCR);	/* wake up */
@@ -78,6 +95,8 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
+	int cpu = cpu_logical_map(0);
+
 	scu_enable(scu_base_addr());
 
 	/* Map the reset vector (in headsmp.S) */
@@ -85,7 +104,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(__pa(shmobile_secondary_vector), SBAR);
 
 	/* enable cache coherency on CPU0 */
-	scu_power_mode(scu_base_addr(), 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 }
 
 static void __init sh73a0_smp_init_cpus(void)
-- 
1.7.10.4

[PATCH 3/4] Revert "ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode"

[Simon Horman]

This reverts commit cdc7594e5c5f7509a86b205edeedc58d72dd3999.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/smp-r8a7779.c |   25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 9def0f2..2ce6af9 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -61,6 +61,9 @@ static void __iomem *scu_base_addr(void)
 	return (void __iomem *)0xf0000000;
 }
 
+static DEFINE_SPINLOCK(scu_lock);
+static unsigned long tmp;
+
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 
@@ -70,6 +73,20 @@ void __init r8a7779_register_twd(void)
 }
 #endif
 
+static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
+{
+	void __iomem *scu_base = scu_base_addr();
+
+	spin_lock(&scu_lock);
+	tmp = __raw_readl(scu_base + 8);
+	tmp &= ~clr;
+	tmp |= set;
+	spin_unlock(&scu_lock);
+
+	/* disable cache coherency after releasing the lock */
+	__raw_writel(tmp, scu_base + 8);
+}
+
 static unsigned int __init r8a7779_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -85,7 +102,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu)
 	cpu = cpu_logical_map(cpu);
 
 	/* disable cache coherency */
-	scu_power_mode(scu_base_addr(), 3);
+	modify_scu_cpu_psr(3 << (cpu * 8), 0);
 
 	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
 		ch = r8a7779_ch_cpu[cpu];
@@ -128,7 +145,7 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct
 	cpu = cpu_logical_map(cpu);
 
 	/* enable cache coherency */
-	scu_power_mode(scu_base_addr(), 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
 	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
 		ch = r8a7779_ch_cpu[cpu];
@@ -141,13 +158,15 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct
 
 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
+	int cpu = cpu_logical_map(0);
+
 	scu_enable(scu_base_addr());
 
 	/* Map the reset vector (in headsmp.S) */
 	__raw_writel(__pa(shmobile_secondary_vector), AVECR);
 
 	/* enable cache coherency on CPU0 */
-	scu_power_mode(scu_base_addr(), 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
 	r8a7779_pm_init();
 
-- 
1.7.10.4

[PATCH 3/4] Revert "ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode"

[Simon Horman]

This reverts commit cdc7594e5c5f7509a86b205edeedc58d72dd3999.

The code changes the flags of the wrong cpus - which breaks the whole
bootup of secondary CPUs.

Cc: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/smp-r8a7779.c |   25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 9def0f2..2ce6af9 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -61,6 +61,9 @@ static void __iomem *scu_base_addr(void)
 	return (void __iomem *)0xf0000000;
 }
 
+static DEFINE_SPINLOCK(scu_lock);
+static unsigned long tmp;
+
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 
@@ -70,6 +73,20 @@ void __init r8a7779_register_twd(void)
 }
 #endif
 
+static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
+{
+	void __iomem *scu_base = scu_base_addr();
+
+	spin_lock(&scu_lock);
+	tmp = __raw_readl(scu_base + 8);
+	tmp &= ~clr;
+	tmp |= set;
+	spin_unlock(&scu_lock);
+
+	/* disable cache coherency after releasing the lock */
+	__raw_writel(tmp, scu_base + 8);
+}
+
 static unsigned int __init r8a7779_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -85,7 +102,7 @@ static int r8a7779_platform_cpu_kill(unsigned int cpu)
 	cpu = cpu_logical_map(cpu);
 
 	/* disable cache coherency */
-	scu_power_mode(scu_base_addr(), 3);
+	modify_scu_cpu_psr(3 << (cpu * 8), 0);
 
 	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
 		ch = r8a7779_ch_cpu[cpu];
@@ -128,7 +145,7 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct
 	cpu = cpu_logical_map(cpu);
 
 	/* enable cache coherency */
-	scu_power_mode(scu_base_addr(), 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
 	if (cpu < ARRAY_SIZE(r8a7779_ch_cpu))
 		ch = r8a7779_ch_cpu[cpu];
@@ -141,13 +158,15 @@ static int __cpuinit r8a7779_boot_secondary(unsigned int cpu, struct task_struct
 
 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
+	int cpu = cpu_logical_map(0);
+
 	scu_enable(scu_base_addr());
 
 	/* Map the reset vector (in headsmp.S) */
 	__raw_writel(__pa(shmobile_secondary_vector), AVECR);
 
 	/* enable cache coherency on CPU0 */
-	scu_power_mode(scu_base_addr(), 0);
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
 	r8a7779_pm_init();
 
-- 
1.7.10.4

[PATCH 4/4] sh: clkfwk: fixup unsed variable warning

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch solves above warning

${LINUX}/drivers/sh/clk/cpg.c:404:6: warning: \
unused variable 'val' [-Wunused-variable]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 drivers/sh/clk/cpg.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index b3dc441..5aedcdf 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -401,7 +401,6 @@ static int fsidiv_enable(struct clk *clk)
 
 static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 val;
 	int idx;
 
 	idx = (clk->parent->rate / rate) & 0xffff;
-- 
1.7.10.4

[PATCH 4/4] sh: clkfwk: fixup unsed variable warning

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch solves above warning

${LINUX}/drivers/sh/clk/cpg.c:404:6: warning: \
unused variable 'val' [-Wunused-variable]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 drivers/sh/clk/cpg.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index b3dc441..5aedcdf 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -401,7 +401,6 @@ static int fsidiv_enable(struct clk *clk)
 
 static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 val;
 	int idx;
 
 	idx = (clk->parent->rate / rate) & 0xffff;
-- 
1.7.10.4

Re: [GIT PULL] Renesas ARM-based SoC for v3.8 #4

[Arnd Bergmann]

On Tuesday 13 November 2012, Simon Horman wrote:
> please consider the following SoC fixes for 3.8.
> Its a little embarrassing, but they all fix problems introduced
> in previous pull-requests for 3.8 that have been merged.

No problem at all, thanks for the quick follow-up!

> * The three Revert patches back-out secondary CPU initialisation
>   changes from Bastian Hecht which he as advised me are incorrect
>   and break secondary CPU initialisation.
> 
> * The clkfwk patch from Morimoto-san resolves a build warning.
> 
> This pull-request is based on the renesas/soc3 branch in the arm-soc tree.

Pulled into next/soc2, on top of the previous branch.

	Arnd

[GIT PULL] Renesas ARM-based SoC for v3.8 #4

[Arnd Bergmann]

On Tuesday 13 November 2012, Simon Horman wrote:
> please consider the following SoC fixes for 3.8.
> Its a little embarrassing, but they all fix problems introduced
> in previous pull-requests for 3.8 that have been merged.

No problem at all, thanks for the quick follow-up!

> * The three Revert patches back-out secondary CPU initialisation
>   changes from Bastian Hecht which he as advised me are incorrect
>   and break secondary CPU initialisation.
> 
> * The clkfwk patch from Morimoto-san resolves a build warning.
> 
> This pull-request is based on the renesas/soc3 branch in the arm-soc tree.

Pulled into next/soc2, on top of the previous branch.

	Arnd

[GIT PULL] Renesas ARM-based SoC for v3.9

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following soc enhancements for 3.9.

This series is based on a merge of the irqchip/gic-vic-move and
timer/cleanup branches in the arm-soc tree. There were a number of
conflicts in this merge, as indicated by the merge commit
6265b0f325eed54558b35769aecb1d79423295c7. In each case I took care to
match the merge made in the arm-soc tree which is evident in the for-next
branch.

----------------------------------------------------------------
The following changes since commit 6265b0f325eed54558b35769aecb1d79423295c7:

  Merge remote-tracking branches 'arm-soc/irqchip/gic-vic-move' and 'arm-soc/timer/cleanup' into soc (2013-01-24 17:57:20 +0900)

are available in the git repository at:


  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc

for you to fetch changes up to 977b5564fc613d662a346abfce05104ea5080a46:

  ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED() (2013-01-25 09:10:45 +0900)

----------------------------------------------------------------
Bastian Hecht (4):
      ARM: shmobile: sh73a0: Add CPU sleep suspend
      ARM: shmobile: r8a7740: Add CPU sleep suspend
      ARM: SH-Mobile: sh73a0: Secondary CPUs handle own SCU flags
      ARM: SH-Mobile: sh73a0: Add CPU Hotplug

Guennadi Liakhovetski (3):
      ARM: sh7372: add clock lookup entries for DT-based devices
      ARM: sh7372: fix cache clean / invalidate order
      ARM: shmobile: add function declarations for sh7372 DT helper functions

Kuninori Morimoto (3):
      ARM: shmobile: r8a7740: add TMU timer support
      ARM: shmobile: sh73a0: fixup div4_clks bitmap
      ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED()

Magnus Damm (1):
      ARM: mach-shmobile: sh73a0 external IRQ wake update

Simon Horman (4):
      ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c
      ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT
      ARM: mach-shmobile: sh73a0: Minimal setup using DT
      ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT

 arch/arm/boot/dts/sh73a0-reference.dtsi        |   24 ++++++
 arch/arm/boot/dts/sh73a0.dtsi                  |   93 +++++++++++++++++++++++
 arch/arm/mach-shmobile/Makefile                |    3 +-
 arch/arm/mach-shmobile/board-armadillo800eva.c |    2 +
 arch/arm/mach-shmobile/board-kzm9g.c           |    2 +
 arch/arm/mach-shmobile/clock-r8a7740.c         |    6 +-
 arch/arm/mach-shmobile/clock-sh7372.c          |    9 +++
 arch/arm/mach-shmobile/clock-sh73a0.c          |   35 ++++++---
 arch/arm/mach-shmobile/headsmp-sh73a0.S        |   50 +++++++++++++
 arch/arm/mach-shmobile/include/mach/common.h   |    8 ++
 arch/arm/mach-shmobile/intc-sh73a0.c           |   16 ++--
 arch/arm/mach-shmobile/pm-r8a7740.c            |   22 ++++++
 arch/arm/mach-shmobile/pm-sh73a0.c             |   32 ++++++++
 arch/arm/mach-shmobile/setup-r8a7740.c         |   95 +++++++++++++++++++++++-
 arch/arm/mach-shmobile/setup-r8a7779.c         |   18 ++---
 arch/arm/mach-shmobile/setup-sh73a0.c          |   62 +++++++++++++++-
 arch/arm/mach-shmobile/sleep-sh7372.S          |   12 +--
 arch/arm/mach-shmobile/smp-sh73a0.c            |   66 ++++++++--------
 18 files changed, 485 insertions(+), 70 deletions(-)
 create mode 100644 arch/arm/boot/dts/sh73a0-reference.dtsi
 create mode 100644 arch/arm/boot/dts/sh73a0.dtsi
 create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
 create mode 100644 arch/arm/mach-shmobile/pm-sh73a0.c

[GIT PULL] Renesas ARM-based SoC for v3.9

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following soc enhancements for 3.9.

This series is based on a merge of the irqchip/gic-vic-move and
timer/cleanup branches in the arm-soc tree. There were a number of
conflicts in this merge, as indicated by the merge commit
6265b0f325eed54558b35769aecb1d79423295c7. In each case I took care to
match the merge made in the arm-soc tree which is evident in the for-next
branch.

----------------------------------------------------------------
The following changes since commit 6265b0f325eed54558b35769aecb1d79423295c7:

  Merge remote-tracking branches 'arm-soc/irqchip/gic-vic-move' and 'arm-soc/timer/cleanup' into soc (2013-01-24 17:57:20 +0900)

are available in the git repository at:


  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc

for you to fetch changes up to 977b5564fc613d662a346abfce05104ea5080a46:

  ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED() (2013-01-25 09:10:45 +0900)

----------------------------------------------------------------
Bastian Hecht (4):
      ARM: shmobile: sh73a0: Add CPU sleep suspend
      ARM: shmobile: r8a7740: Add CPU sleep suspend
      ARM: SH-Mobile: sh73a0: Secondary CPUs handle own SCU flags
      ARM: SH-Mobile: sh73a0: Add CPU Hotplug

Guennadi Liakhovetski (3):
      ARM: sh7372: add clock lookup entries for DT-based devices
      ARM: sh7372: fix cache clean / invalidate order
      ARM: shmobile: add function declarations for sh7372 DT helper functions

Kuninori Morimoto (3):
      ARM: shmobile: r8a7740: add TMU timer support
      ARM: shmobile: sh73a0: fixup div4_clks bitmap
      ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED()

Magnus Damm (1):
      ARM: mach-shmobile: sh73a0 external IRQ wake update

Simon Horman (4):
      ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c
      ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT
      ARM: mach-shmobile: sh73a0: Minimal setup using DT
      ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT

 arch/arm/boot/dts/sh73a0-reference.dtsi        |   24 ++++++
 arch/arm/boot/dts/sh73a0.dtsi                  |   93 +++++++++++++++++++++++
 arch/arm/mach-shmobile/Makefile                |    3 +-
 arch/arm/mach-shmobile/board-armadillo800eva.c |    2 +
 arch/arm/mach-shmobile/board-kzm9g.c           |    2 +
 arch/arm/mach-shmobile/clock-r8a7740.c         |    6 +-
 arch/arm/mach-shmobile/clock-sh7372.c          |    9 +++
 arch/arm/mach-shmobile/clock-sh73a0.c          |   35 ++++++---
 arch/arm/mach-shmobile/headsmp-sh73a0.S        |   50 +++++++++++++
 arch/arm/mach-shmobile/include/mach/common.h   |    8 ++
 arch/arm/mach-shmobile/intc-sh73a0.c           |   16 ++--
 arch/arm/mach-shmobile/pm-r8a7740.c            |   22 ++++++
 arch/arm/mach-shmobile/pm-sh73a0.c             |   32 ++++++++
 arch/arm/mach-shmobile/setup-r8a7740.c         |   95 +++++++++++++++++++++++-
 arch/arm/mach-shmobile/setup-r8a7779.c         |   18 ++---
 arch/arm/mach-shmobile/setup-sh73a0.c          |   62 +++++++++++++++-
 arch/arm/mach-shmobile/sleep-sh7372.S          |   12 +--
 arch/arm/mach-shmobile/smp-sh73a0.c            |   66 ++++++++--------
 18 files changed, 485 insertions(+), 70 deletions(-)
 create mode 100644 arch/arm/boot/dts/sh73a0-reference.dtsi
 create mode 100644 arch/arm/boot/dts/sh73a0.dtsi
 create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S
 create mode 100644 arch/arm/mach-shmobile/pm-sh73a0.c

[PATCH 01/15] ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c

[Simon Horman]

linux/dma-mapping.h was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 03c69f9..9ef397d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -27,7 +27,6 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_dma.h>
 #include <linux/sh_timer.h>
-#include <linux/dma-mapping.h>
 #include <mach/dma-register.h>
 #include <mach/r8a7740.h>
 #include <mach/pm-rmobile.h>
-- 
1.7.10.4

[PATCH 01/15] ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c

[Simon Horman]

linux/dma-mapping.h was included twice.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7740.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 03c69f9..9ef397d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -27,7 +27,6 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_dma.h>
 #include <linux/sh_timer.h>
-#include <linux/dma-mapping.h>
 #include <mach/dma-register.h>
 #include <mach/r8a7740.h>
 #include <mach/pm-rmobile.h>
-- 
1.7.10.4

[PATCH 02/15] ARM: shmobile: r8a7740: add TMU timer support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enabled TMU0 timer on r8a7740.
But TMU1 timer is not supported yet

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |    6 +-
 arch/arm/mach-shmobile/setup-r8a7740.c |   94 ++++++++++++++++++++++++++++++++
 2 files changed, 99 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index eac49d5..19ce885 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -581,10 +581,14 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0",	&mstp_clks[MSTP100]),
-	CLKDEV_DEV_ID("sh_tmu.1",		&mstp_clks[MSTP111]),
+	CLKDEV_DEV_ID("sh_tmu.3",		&mstp_clks[MSTP111]),
+	CLKDEV_DEV_ID("sh_tmu.4",		&mstp_clks[MSTP111]),
+	CLKDEV_DEV_ID("sh_tmu.5",		&mstp_clks[MSTP111]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.0",	&mstp_clks[MSTP116]),
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1",	&mstp_clks[MSTP117]),
 	CLKDEV_DEV_ID("sh_tmu.0",		&mstp_clks[MSTP125]),
+	CLKDEV_DEV_ID("sh_tmu.1",		&mstp_clks[MSTP125]),
+	CLKDEV_DEV_ID("sh_tmu.2",		&mstp_clks[MSTP125]),
 	CLKDEV_DEV_ID("sh_mobile_ceu.0",	&mstp_clks[MSTP127]),
 	CLKDEV_DEV_ID("sh_mobile_ceu.1",	&mstp_clks[MSTP128]),
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 9ef397d..847567d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -261,6 +261,97 @@ static struct platform_device cmt10_device = {
 	.num_resources	= ARRAY_SIZE(cmt10_resources),
 };
 
+/* TMU */
+static struct sh_timer_config tmu00_platform_data = {
+	.name = "TMU00",
+	.channel_offset = 0x4,
+	.timer_bit = 0,
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu00_resources[] = {
+	[0] = {
+		.name	= "TMU00",
+		.start	= 0xfff80008,
+		.end	= 0xfff80014 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0xe80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu00_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu00_platform_data,
+	},
+	.resource	= tmu00_resources,
+	.num_resources	= ARRAY_SIZE(tmu00_resources),
+};
+
+static struct sh_timer_config tmu01_platform_data = {
+	.name = "TMU01",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu01_resources[] = {
+	[0] = {
+		.name	= "TMU01",
+		.start	= 0xfff80014,
+		.end	= 0xfff80020 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0xea0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu01_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu01_platform_data,
+	},
+	.resource	= tmu01_resources,
+	.num_resources	= ARRAY_SIZE(tmu01_resources),
+};
+
+static struct sh_timer_config tmu02_platform_data = {
+	.name = "TMU02",
+	.channel_offset = 0x1C,
+	.timer_bit = 2,
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu02_resources[] = {
+	[0] = {
+		.name	= "TMU02",
+		.start	= 0xfff80020,
+		.end	= 0xfff8002C - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0xec0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu02_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu02_platform_data,
+	},
+	.resource	= tmu02_resources,
+	.num_resources	= ARRAY_SIZE(tmu02_resources),
+};
+
 static struct platform_device *r8a7740_early_devices[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -272,6 +363,9 @@ static struct platform_device *r8a7740_early_devices[] __initdata = {
 	&scif7_device,
 	&scifb_device,
 	&cmt10_device,
+	&tmu00_device,
+	&tmu01_device,
+	&tmu02_device,
 };
 
 /* DMA */
-- 
1.7.10.4

[PATCH 02/15] ARM: shmobile: r8a7740: add TMU timer support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enabled TMU0 timer on r8a7740.
But TMU1 timer is not supported yet

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |    6 +-
 arch/arm/mach-shmobile/setup-r8a7740.c |   94 ++++++++++++++++++++++++++++++++
 2 files changed, 99 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index eac49d5..19ce885 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -581,10 +581,14 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0",	&mstp_clks[MSTP100]),
-	CLKDEV_DEV_ID("sh_tmu.1",		&mstp_clks[MSTP111]),
+	CLKDEV_DEV_ID("sh_tmu.3",		&mstp_clks[MSTP111]),
+	CLKDEV_DEV_ID("sh_tmu.4",		&mstp_clks[MSTP111]),
+	CLKDEV_DEV_ID("sh_tmu.5",		&mstp_clks[MSTP111]),
 	CLKDEV_DEV_ID("i2c-sh_mobile.0",	&mstp_clks[MSTP116]),
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1",	&mstp_clks[MSTP117]),
 	CLKDEV_DEV_ID("sh_tmu.0",		&mstp_clks[MSTP125]),
+	CLKDEV_DEV_ID("sh_tmu.1",		&mstp_clks[MSTP125]),
+	CLKDEV_DEV_ID("sh_tmu.2",		&mstp_clks[MSTP125]),
 	CLKDEV_DEV_ID("sh_mobile_ceu.0",	&mstp_clks[MSTP127]),
 	CLKDEV_DEV_ID("sh_mobile_ceu.1",	&mstp_clks[MSTP128]),
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 9ef397d..847567d 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -261,6 +261,97 @@ static struct platform_device cmt10_device = {
 	.num_resources	= ARRAY_SIZE(cmt10_resources),
 };
 
+/* TMU */
+static struct sh_timer_config tmu00_platform_data = {
+	.name = "TMU00",
+	.channel_offset = 0x4,
+	.timer_bit = 0,
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu00_resources[] = {
+	[0] = {
+		.name	= "TMU00",
+		.start	= 0xfff80008,
+		.end	= 0xfff80014 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0xe80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu00_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu00_platform_data,
+	},
+	.resource	= tmu00_resources,
+	.num_resources	= ARRAY_SIZE(tmu00_resources),
+};
+
+static struct sh_timer_config tmu01_platform_data = {
+	.name = "TMU01",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu01_resources[] = {
+	[0] = {
+		.name	= "TMU01",
+		.start	= 0xfff80014,
+		.end	= 0xfff80020 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0xea0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu01_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu01_platform_data,
+	},
+	.resource	= tmu01_resources,
+	.num_resources	= ARRAY_SIZE(tmu01_resources),
+};
+
+static struct sh_timer_config tmu02_platform_data = {
+	.name = "TMU02",
+	.channel_offset = 0x1C,
+	.timer_bit = 2,
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu02_resources[] = {
+	[0] = {
+		.name	= "TMU02",
+		.start	= 0xfff80020,
+		.end	= 0xfff8002C - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0xec0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu02_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu02_platform_data,
+	},
+	.resource	= tmu02_resources,
+	.num_resources	= ARRAY_SIZE(tmu02_resources),
+};
+
 static struct platform_device *r8a7740_early_devices[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -272,6 +363,9 @@ static struct platform_device *r8a7740_early_devices[] __initdata = {
 	&scif7_device,
 	&scifb_device,
 	&cmt10_device,
+	&tmu00_device,
+	&tmu01_device,
+	&tmu02_device,
 };
 
 /* DMA */
-- 
1.7.10.4

[PATCH 03/15] ARM: shmobile: sh73a0: fixup div4_clks bitmap

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

div4_clks's bitmap of sh73a0 was wrong.
This patch is based on v2.0 datasheet.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh73a0.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 516ff7f..5f57701 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -264,17 +264,17 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
 	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
 
 static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT),
-	[DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0),
-	[DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0),
-	[DIV4_Z] = DIV4(FRQCRB, 24, 0xbff, 0),
-	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xfff, 0),
-	[DIV4_ZT] = DIV4(FRQCRB, 16, 0xfff, 0),
-	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xfff, 0),
-	[DIV4_HP] = DIV4(FRQCRB, 4, 0xfff, 0),
+	[DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
+	[DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
+	[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
+	[DIV4_Z] = DIV4(FRQCRB, 24, 0x97f, 0),
+	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0),
+	[DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0),
+	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
+	[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
 };
 
 enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
-- 
1.7.10.4

[PATCH 03/15] ARM: shmobile: sh73a0: fixup div4_clks bitmap

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

div4_clks's bitmap of sh73a0 was wrong.
This patch is based on v2.0 datasheet.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh73a0.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 516ff7f..5f57701 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -264,17 +264,17 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
 	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
 
 static struct clk div4_clks[DIV4_NR] = {
-	[DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT),
-	[DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
-	[DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0),
-	[DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0),
-	[DIV4_Z] = DIV4(FRQCRB, 24, 0xbff, 0),
-	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xfff, 0),
-	[DIV4_ZT] = DIV4(FRQCRB, 16, 0xfff, 0),
-	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xfff, 0),
-	[DIV4_HP] = DIV4(FRQCRB, 4, 0xfff, 0),
+	[DIV4_I] = DIV4(FRQCRA, 20, 0xdff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xd7f, CLK_ENABLE_ON_INIT),
+	[DIV4_M3] = DIV4(FRQCRA, 12, 0x1dff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCRA, 8, 0xdff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
+	[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
+	[DIV4_Z] = DIV4(FRQCRB, 24, 0x97f, 0),
+	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0),
+	[DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0),
+	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
+	[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
 };
 
 enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
-- 
1.7.10.4

[PATCH 04/15] ARM: mach-shmobile: sh73a0 external IRQ wake update

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Use sh73a0_set_wake() for external IRQ signals on sh73a0.

The sh73a0 IRQ hardware for external IRQ pins consists of
the INTCA interrupt controller and the GIC together doing
their best to limp along. These external IRQ pins are
treated as a special case where interrupts need to be
managed in both interrupt controllers in parallel.

The ->irq_set_wake() callback for the external IRQ pins
can be dealt with in the same way as INTCA-only without
involving the GIC. So this patch updates the external
IRQ pin code for sh73a0 to no longer involve the GIC.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/intc-sh73a0.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 9783699..45973b5 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -315,11 +315,6 @@ static int intca_gic_set_type(struct irq_data *data, unsigned int type)
 	return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
 }
 
-static int intca_gic_set_wake(struct irq_data *data, unsigned int on)
-{
-	return irq_cbp(irq_set_wake, to_intca_reloc_irq(data), on);
-}
-
 #ifdef CONFIG_SMP
 static int intca_gic_set_affinity(struct irq_data *data,
 				  const struct cpumask *cpumask,
@@ -339,7 +334,7 @@ struct irq_chip intca_gic_irq_chip = {
 	.irq_disable		= intca_gic_disable,
 	.irq_shutdown		= intca_gic_disable,
 	.irq_set_type		= intca_gic_set_type,
-	.irq_set_wake		= intca_gic_set_wake,
+	.irq_set_wake		= sh73a0_set_wake,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= intca_gic_set_affinity,
 #endif
-- 
1.7.10.4

[PATCH 04/15] ARM: mach-shmobile: sh73a0 external IRQ wake update

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Use sh73a0_set_wake() for external IRQ signals on sh73a0.

The sh73a0 IRQ hardware for external IRQ pins consists of
the INTCA interrupt controller and the GIC together doing
their best to limp along. These external IRQ pins are
treated as a special case where interrupts need to be
managed in both interrupt controllers in parallel.

The ->irq_set_wake() callback for the external IRQ pins
can be dealt with in the same way as INTCA-only without
involving the GIC. So this patch updates the external
IRQ pin code for sh73a0 to no longer involve the GIC.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/intc-sh73a0.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 9783699..45973b5 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -315,11 +315,6 @@ static int intca_gic_set_type(struct irq_data *data, unsigned int type)
 	return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
 }
 
-static int intca_gic_set_wake(struct irq_data *data, unsigned int on)
-{
-	return irq_cbp(irq_set_wake, to_intca_reloc_irq(data), on);
-}
-
 #ifdef CONFIG_SMP
 static int intca_gic_set_affinity(struct irq_data *data,
 				  const struct cpumask *cpumask,
@@ -339,7 +334,7 @@ struct irq_chip intca_gic_irq_chip = {
 	.irq_disable		= intca_gic_disable,
 	.irq_shutdown		= intca_gic_disable,
 	.irq_set_type		= intca_gic_set_type,
-	.irq_set_wake		= intca_gic_set_wake,
+	.irq_set_wake		= sh73a0_set_wake,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= intca_gic_set_affinity,
 #endif
-- 
1.7.10.4

[PATCH 05/15] ARM: sh7372: add clock lookup entries for DT-based devices

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

When booting with DT, devices are named differently. To get their clocks
additional entries have to be added to the lookup table.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh7372.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 3ca6757b..45d21fe 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -544,6 +544,7 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("fff30000.i2c", &mstp_clks[MSTP001]), /* IIC2 */
 	CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
@@ -556,6 +557,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
+	CLKDEV_DEV_ID("fff20000.i2c", &mstp_clks[MSTP116]), /* IIC0 */
 	CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[MSTP113]), /* MERAM */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
@@ -577,18 +579,25 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
+	CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]), /* IIC1 */
 	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("sh_flctl.0", &mstp_clks[MSTP315]), /* FLCTL */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+	CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+	CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
+	CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMC */
 	CLKDEV_DEV_ID("sh-mipi-dsi.1", &mstp_clks[MSTP423]), /* DSITX1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */
+	CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
+	CLKDEV_DEV_ID("e6d20000.i2c", &mstp_clks[MSTP411]), /* IIC3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
+	CLKDEV_DEV_ID("e6d30000.i2c", &mstp_clks[MSTP410]), /* IIC4 */
 	CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */
 	CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
 	CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
-- 
1.7.10.4

[PATCH 05/15] ARM: sh7372: add clock lookup entries for DT-based devices

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

When booting with DT, devices are named differently. To get their clocks
additional entries have to be added to the lookup table.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh7372.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 3ca6757b..45d21fe 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -544,6 +544,7 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("fff30000.i2c", &mstp_clks[MSTP001]), /* IIC2 */
 	CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
@@ -556,6 +557,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
+	CLKDEV_DEV_ID("fff20000.i2c", &mstp_clks[MSTP116]), /* IIC0 */
 	CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[MSTP113]), /* MERAM */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */
@@ -577,18 +579,25 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
+	CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]), /* IIC1 */
 	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("sh_flctl.0", &mstp_clks[MSTP315]), /* FLCTL */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
+	CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
+	CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
+	CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMC */
 	CLKDEV_DEV_ID("sh-mipi-dsi.1", &mstp_clks[MSTP423]), /* DSITX1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */
+	CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
+	CLKDEV_DEV_ID("e6d20000.i2c", &mstp_clks[MSTP411]), /* IIC3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
+	CLKDEV_DEV_ID("e6d30000.i2c", &mstp_clks[MSTP410]), /* IIC4 */
 	CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */
 	CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
 	CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
-- 
1.7.10.4

[PATCH 06/15] ARM: sh7372: fix cache clean / invalidate order

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

According to the Cortex A8 TRM the L2 cache should be first cleaned and
then disabled. Fix the swapped order on sh7372.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/sleep-sh7372.S |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index 1d56467..a9df53b 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -59,17 +59,19 @@ sh7372_do_idle_sysc:
 	mcr	p15, 0, r0, c1, c0, 0
 	isb
 
+	/*
+	 * Clean and invalidate data cache again.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+
 	/* disable L2 cache in the aux control register */
 	mrc     p15, 0, r10, c1, c0, 1
 	bic     r10, r10, #2
 	mcr     p15, 0, r10, c1, c0, 1
+	isb
 
 	/*
-	 * Invalidate data cache again.
-	 */
-	ldr	r1, kernel_flush
-	blx	r1
-	/*
 	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
 	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
 	 * This sequence switches back to ARM.  Note that .align may insert a
-- 
1.7.10.4

[PATCH 06/15] ARM: sh7372: fix cache clean / invalidate order

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

According to the Cortex A8 TRM the L2 cache should be first cleaned and
then disabled. Fix the swapped order on sh7372.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/sleep-sh7372.S |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S
index 1d56467..a9df53b 100644
--- a/arch/arm/mach-shmobile/sleep-sh7372.S
+++ b/arch/arm/mach-shmobile/sleep-sh7372.S
@@ -59,17 +59,19 @@ sh7372_do_idle_sysc:
 	mcr	p15, 0, r0, c1, c0, 0
 	isb
 
+	/*
+	 * Clean and invalidate data cache again.
+	 */
+	ldr	r1, kernel_flush
+	blx	r1
+
 	/* disable L2 cache in the aux control register */
 	mrc     p15, 0, r10, c1, c0, 1
 	bic     r10, r10, #2
 	mcr     p15, 0, r10, c1, c0, 1
+	isb
 
 	/*
-	 * Invalidate data cache again.
-	 */
-	ldr	r1, kernel_flush
-	blx	r1
-	/*
 	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
 	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
 	 * This sequence switches back to ARM.  Note that .align may insert a
-- 
1.7.10.4

[PATCH 07/15] ARM: shmobile: add function declarations for sh7372 DT helper functions

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

sh7372_add_early_devices_dt() and sh7372_add_standard_devices_dt() are
defined as global functions in arch/arm/mach-shmobile/setup-sh7372.c,
but their declarations are missing. Add them to common.h, where similar
functions for this and other SoC types are already declared.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/common.h |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index a57439e..2d1686b 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -23,6 +23,8 @@ extern void sh7372_map_io(void);
 extern void sh7372_earlytimer_init(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
+extern void sh7372_add_early_devices_dt(void);
+extern void sh7372_add_standard_devices_dt(void);
 extern void sh7372_clock_init(void);
 extern void sh7372_pinmux_init(void);
 extern void sh7372_pm_init(void);
-- 
1.7.10.4

[PATCH 07/15] ARM: shmobile: add function declarations for sh7372 DT helper functions

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

sh7372_add_early_devices_dt() and sh7372_add_standard_devices_dt() are
defined as global functions in arch/arm/mach-shmobile/setup-sh7372.c,
but their declarations are missing. Add them to common.h, where similar
functions for this and other SoC types are already declared.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/common.h |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index a57439e..2d1686b 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -23,6 +23,8 @@ extern void sh7372_map_io(void);
 extern void sh7372_earlytimer_init(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
+extern void sh7372_add_early_devices_dt(void);
+extern void sh7372_add_standard_devices_dt(void);
 extern void sh7372_clock_init(void);
 extern void sh7372_pinmux_init(void);
 extern void sh7372_pm_init(void);
-- 
1.7.10.4

[PATCH 08/15] ARM: shmobile: sh73a0: Add CPU sleep suspend

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep. It is
entered by a simple dsb and wfi instruction via cpu_do_idle(). As just
clocks are stopped there is no need to save or restore any state of the
system.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile              |    1 +
 arch/arm/mach-shmobile/board-kzm9g.c         |    2 ++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/pm-sh73a0.c           |   32 ++++++++++++++++++++++++++
 4 files changed, 36 insertions(+)
 create mode 100644 arch/arm/mach-shmobile/pm-sh73a0.c

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 0b71479..f6aba6d 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_ARCH_SHMOBILE)	+= pm-rmobile.o
 obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o
 obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
+obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
 
 # Board objects
 obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index ac94285..363c6ed 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -772,6 +772,8 @@ static void __init kzm_init(void)
 
 	sh73a0_add_standard_devices();
 	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
+
+	sh73a0_pm_init();
 }
 
 static void kzm9g_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 2d1686b..f221c11 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -40,6 +40,7 @@ extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
+extern void sh73a0_pm_init(void);
 extern struct clk sh73a0_extal1_clk;
 extern struct clk sh73a0_extal2_clk;
 extern struct clk sh73a0_extcki_clk;
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
new file mode 100644
index 0000000..99086e9
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-sh73a0.c
@@ -0,0 +1,32 @@
+/*
+ * sh73a0 Power management support
+ *
+ *  Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/suspend.h>
+#include <mach/common.h>
+
+#ifdef CONFIG_SUSPEND
+static int sh73a0_enter_suspend(suspend_state_t suspend_state)
+{
+	cpu_do_idle();
+	return 0;
+}
+
+static void sh73a0_suspend_init(void)
+{
+	shmobile_suspend_ops.enter = sh73a0_enter_suspend;
+}
+#else
+static void sh73a0_suspend_init(void) {}
+#endif
+
+void __init sh73a0_pm_init(void)
+{
+	sh73a0_suspend_init();
+}
-- 
1.7.10.4

[PATCH 08/15] ARM: shmobile: sh73a0: Add CPU sleep suspend

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep. It is
entered by a simple dsb and wfi instruction via cpu_do_idle(). As just
clocks are stopped there is no need to save or restore any state of the
system.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile              |    1 +
 arch/arm/mach-shmobile/board-kzm9g.c         |    2 ++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/pm-sh73a0.c           |   32 ++++++++++++++++++++++++++
 4 files changed, 36 insertions(+)
 create mode 100644 arch/arm/mach-shmobile/pm-sh73a0.c

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 0b71479..f6aba6d 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_ARCH_SHMOBILE)	+= pm-rmobile.o
 obj-$(CONFIG_ARCH_SH7372)	+= pm-sh7372.o sleep-sh7372.o
 obj-$(CONFIG_ARCH_R8A7740)	+= pm-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
+obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
 
 # Board objects
 obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index ac94285..363c6ed 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -772,6 +772,8 @@ static void __init kzm_init(void)
 
 	sh73a0_add_standard_devices();
 	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
+
+	sh73a0_pm_init();
 }
 
 static void kzm9g_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 2d1686b..f221c11 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -40,6 +40,7 @@ extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
+extern void sh73a0_pm_init(void);
 extern struct clk sh73a0_extal1_clk;
 extern struct clk sh73a0_extal2_clk;
 extern struct clk sh73a0_extcki_clk;
diff --git a/arch/arm/mach-shmobile/pm-sh73a0.c b/arch/arm/mach-shmobile/pm-sh73a0.c
new file mode 100644
index 0000000..99086e9
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-sh73a0.c
@@ -0,0 +1,32 @@
+/*
+ * sh73a0 Power management support
+ *
+ *  Copyright (C) 2012 Bastian Hecht <hechtb+renesas@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/suspend.h>
+#include <mach/common.h>
+
+#ifdef CONFIG_SUSPEND
+static int sh73a0_enter_suspend(suspend_state_t suspend_state)
+{
+	cpu_do_idle();
+	return 0;
+}
+
+static void sh73a0_suspend_init(void)
+{
+	shmobile_suspend_ops.enter = sh73a0_enter_suspend;
+}
+#else
+static void sh73a0_suspend_init(void) {}
+#endif
+
+void __init sh73a0_pm_init(void)
+{
+	sh73a0_suspend_init();
+}
-- 
1.7.10.4

[PATCH 09/15] ARM: shmobile: r8a7740: Add CPU sleep suspend

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep.
It is entered by a simple dsb and wfi instruction via cpu_do_idle(). As
just clocks are stopped there is no need to save or restore any state of
the system.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
[ horms@verge.net.au: Added missing includes ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    2 ++
 arch/arm/mach-shmobile/include/mach/common.h   |    1 +
 arch/arm/mach-shmobile/pm-r8a7740.c            |   22 ++++++++++++++++++++++
 3 files changed, 25 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index e791244..6573137 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1181,6 +1181,8 @@ static void __init eva_init(void)
 	rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
 	if (usb)
 		rmobile_add_device_to_domain("A3SP", usb);
+
+	r8a7740_pm_init();
 }
 
 static void __init eva_earlytimer_init(void)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index f221c11..c0ab595 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -52,6 +52,7 @@ extern void r8a7740_add_early_devices(void);
 extern void r8a7740_add_standard_devices(void);
 extern void r8a7740_clock_init(u8 md_ck);
 extern void r8a7740_pinmux_init(void);
+extern void r8a7740_pm_init(void);
 
 extern void r8a7779_init_irq(void);
 extern void r8a7779_map_io(void);
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index 21e5316d..40b87aa 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -9,7 +9,9 @@
  * for more details.
  */
 #include <linux/console.h>
+#include <linux/suspend.h>
 #include <mach/pm-rmobile.h>
+#include <mach/common.h>
 
 #ifdef CONFIG_PM
 static int r8a7740_pd_a4s_suspend(void)
@@ -58,3 +60,23 @@ void __init r8a7740_init_pm_domains(void)
 }
 
 #endif /* CONFIG_PM */
+
+#ifdef CONFIG_SUSPEND
+static int r8a7740_enter_suspend(suspend_state_t suspend_state)
+{
+	cpu_do_idle();
+	return 0;
+}
+
+static void r8a7740_suspend_init(void)
+{
+	shmobile_suspend_ops.enter = r8a7740_enter_suspend;
+}
+#else
+static void r8a7740_suspend_init(void) {}
+#endif
+
+void __init r8a7740_pm_init(void)
+{
+	r8a7740_suspend_init();
+}
-- 
1.7.10.4

[PATCH 09/15] ARM: shmobile: r8a7740: Add CPU sleep suspend

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Add the lighest possible sleep mode on Cortex-A9 cores: CPU sleep.
It is entered by a simple dsb and wfi instruction via cpu_do_idle(). As
just clocks are stopped there is no need to save or restore any state of
the system.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
[ horms at verge.net.au: Added missing includes ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    2 ++
 arch/arm/mach-shmobile/include/mach/common.h   |    1 +
 arch/arm/mach-shmobile/pm-r8a7740.c            |   22 ++++++++++++++++++++++
 3 files changed, 25 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index e791244..6573137 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1181,6 +1181,8 @@ static void __init eva_init(void)
 	rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
 	if (usb)
 		rmobile_add_device_to_domain("A3SP", usb);
+
+	r8a7740_pm_init();
 }
 
 static void __init eva_earlytimer_init(void)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index f221c11..c0ab595 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -52,6 +52,7 @@ extern void r8a7740_add_early_devices(void);
 extern void r8a7740_add_standard_devices(void);
 extern void r8a7740_clock_init(u8 md_ck);
 extern void r8a7740_pinmux_init(void);
+extern void r8a7740_pm_init(void);
 
 extern void r8a7779_init_irq(void);
 extern void r8a7779_map_io(void);
diff --git a/arch/arm/mach-shmobile/pm-r8a7740.c b/arch/arm/mach-shmobile/pm-r8a7740.c
index 21e5316d..40b87aa 100644
--- a/arch/arm/mach-shmobile/pm-r8a7740.c
+++ b/arch/arm/mach-shmobile/pm-r8a7740.c
@@ -9,7 +9,9 @@
  * for more details.
  */
 #include <linux/console.h>
+#include <linux/suspend.h>
 #include <mach/pm-rmobile.h>
+#include <mach/common.h>
 
 #ifdef CONFIG_PM
 static int r8a7740_pd_a4s_suspend(void)
@@ -58,3 +60,23 @@ void __init r8a7740_init_pm_domains(void)
 }
 
 #endif /* CONFIG_PM */
+
+#ifdef CONFIG_SUSPEND
+static int r8a7740_enter_suspend(suspend_state_t suspend_state)
+{
+	cpu_do_idle();
+	return 0;
+}
+
+static void r8a7740_suspend_init(void)
+{
+	shmobile_suspend_ops.enter = r8a7740_enter_suspend;
+}
+#else
+static void r8a7740_suspend_init(void) {}
+#endif
+
+void __init r8a7740_pm_init(void)
+{
+	r8a7740_suspend_init();
+}
-- 
1.7.10.4

[PATCH 10/15] ARM: SH-Mobile: sh73a0: Secondary CPUs handle own SCU flags

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

When booting secondary CPUs we have used the main CPU to set up the
Snoop Control Unit flags of these CPUs. It is a cleaner approach
if every CPU takes care of its own flags. We avoid the need for
locking and the program logic is more concise. With this patch the file
headsmp-sh73a0.S is added that contains a startup vector for secondary CPUs
that sets up its own SCU flags.
Further in sh73a0_smp_prepare_cpus() we can rely on the generic ARM helper
scu_power_mode(). This is possible as we don't cross borders anymore (every
CPU handles its own flags) and need no locking. So we can throw out the
needless function modify_scu_cpu_psr().

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile              |    2 +-
 arch/arm/mach-shmobile/headsmp-sh73a0.S      |   50 ++++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/smp-sh73a0.c          |   30 +++-------------
 4 files changed, 56 insertions(+), 27 deletions(-)
 create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index f6aba6d..700e662 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o
+smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-sh73a0.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o
 
diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S
new file mode 100644
index 0000000..bec4c0d
--- /dev/null
+++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S
@@ -0,0 +1,50 @@
+/*
+ * SMP support for SoC sh73a0
+ *
+ * Copyright (C) 2012 Bastian Hecht
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+
+	__CPUINIT
+/*
+ * Reset vector for secondary CPUs.
+ *
+ * First we turn on L1 cache coherency for our CPU. Then we jump to
+ * shmobile_invalidate_start that invalidates the cache and hands over control
+ * to the common ARM startup code.
+ * This function will be mapped to address 0 by the SBAR register.
+ * A normal branch is out of range here so we need a long jump. We jump to
+ * the physical address as the MMU is still turned off.
+ */
+	.align	12
+ENTRY(sh73a0_secondary_vector)
+	mrc     p15, 0, r0, c0, c0, 5	@ read MIPDR
+	and	r0, r0, #3		@ mask out cpu ID
+	lsl	r0, r0, #3		@ we will shift by cpu_id * 8 bits
+	mov	r1, #0xf0000000		@ SCU base address
+	ldr	r2, [r1, #8]		@ SCU Power Status Register
+	mov	r3, #3
+	bic	r2, r2, r3, lsl r0	@ Clear bits of our CPU (Run Mode)
+	str	r2, [r1, #8]		@ write back
+
+	ldr	pc, 1f
+1:	.long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(sh73a0_secondary_vector)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index c0ab595..4b1af93 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -41,6 +41,7 @@ extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
 extern void sh73a0_pm_init(void);
+extern void sh73a0_secondary_vector(void);
 extern struct clk sh73a0_extal1_clk;
 extern struct clk sh73a0_extal2_clk;
 extern struct clk sh73a0_extcki_clk;
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 5c5bcb5..430b44e 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -41,9 +41,6 @@ static void __iomem *scu_base_addr(void)
 	return (void __iomem *)0xf0000000;
 }
 
-static DEFINE_SPINLOCK(scu_lock);
-static unsigned long tmp;
-
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 void __init sh73a0_register_twd(void)
@@ -52,20 +49,6 @@ void __init sh73a0_register_twd(void)
 }
 #endif
 
-static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
-{
-	void __iomem *scu_base = scu_base_addr();
-
-	spin_lock(&scu_lock);
-	tmp = __raw_readl(scu_base + 8);
-	tmp &= ~clr;
-	tmp |= set;
-	spin_unlock(&scu_lock);
-
-	/* disable cache coherency after releasing the lock */
-	__raw_writel(tmp, scu_base + 8);
-}
-
 static unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -82,9 +65,6 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 {
 	cpu = cpu_logical_map(cpu);
 
-	/* enable cache coherency */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
-
 	if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) = 3)
 		__raw_writel(1 << cpu, WUPCR);	/* wake up */
 	else
@@ -95,16 +75,14 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu = cpu_logical_map(0);
-
 	scu_enable(scu_base_addr());
 
-	/* Map the reset vector (in headsmp.S) */
+	/* Map the reset vector (in headsmp-sh73a0.S) */
 	__raw_writel(0, APARMBAREA);      /* 4k */
-	__raw_writel(__pa(shmobile_secondary_vector), SBAR);
+	__raw_writel(__pa(sh73a0_secondary_vector), SBAR);
 
-	/* enable cache coherency on CPU0 */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
+	/* enable cache coherency on booting CPU */
+	scu_power_mode(scu_base_addr(), SCU_PM_NORMAL);
 }
 
 static void __init sh73a0_smp_init_cpus(void)
-- 
1.7.10.4

[PATCH 10/15] ARM: SH-Mobile: sh73a0: Secondary CPUs handle own SCU flags

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

When booting secondary CPUs we have used the main CPU to set up the
Snoop Control Unit flags of these CPUs. It is a cleaner approach
if every CPU takes care of its own flags. We avoid the need for
locking and the program logic is more concise. With this patch the file
headsmp-sh73a0.S is added that contains a startup vector for secondary CPUs
that sets up its own SCU flags.
Further in sh73a0_smp_prepare_cpus() we can rely on the generic ARM helper
scu_power_mode(). This is possible as we don't cross borders anymore (every
CPU handles its own flags) and need no locking. So we can throw out the
needless function modify_scu_cpu_psr().

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/Makefile              |    2 +-
 arch/arm/mach-shmobile/headsmp-sh73a0.S      |   50 ++++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/smp-sh73a0.c          |   30 +++-------------
 4 files changed, 56 insertions(+), 27 deletions(-)
 create mode 100644 arch/arm/mach-shmobile/headsmp-sh73a0.S

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index f6aba6d..700e662 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o
+smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o headsmp-sh73a0.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o
 smp-$(CONFIG_ARCH_EMEV2)	+= smp-emev2.o
 
diff --git a/arch/arm/mach-shmobile/headsmp-sh73a0.S b/arch/arm/mach-shmobile/headsmp-sh73a0.S
new file mode 100644
index 0000000..bec4c0d
--- /dev/null
+++ b/arch/arm/mach-shmobile/headsmp-sh73a0.S
@@ -0,0 +1,50 @@
+/*
+ * SMP support for SoC sh73a0
+ *
+ * Copyright (C) 2012 Bastian Hecht
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+
+	__CPUINIT
+/*
+ * Reset vector for secondary CPUs.
+ *
+ * First we turn on L1 cache coherency for our CPU. Then we jump to
+ * shmobile_invalidate_start that invalidates the cache and hands over control
+ * to the common ARM startup code.
+ * This function will be mapped to address 0 by the SBAR register.
+ * A normal branch is out of range here so we need a long jump. We jump to
+ * the physical address as the MMU is still turned off.
+ */
+	.align	12
+ENTRY(sh73a0_secondary_vector)
+	mrc     p15, 0, r0, c0, c0, 5	@ read MIPDR
+	and	r0, r0, #3		@ mask out cpu ID
+	lsl	r0, r0, #3		@ we will shift by cpu_id * 8 bits
+	mov	r1, #0xf0000000		@ SCU base address
+	ldr	r2, [r1, #8]		@ SCU Power Status Register
+	mov	r3, #3
+	bic	r2, r2, r3, lsl r0	@ Clear bits of our CPU (Run Mode)
+	str	r2, [r1, #8]		@ write back
+
+	ldr	pc, 1f
+1:	.long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
+ENDPROC(sh73a0_secondary_vector)
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index c0ab595..4b1af93 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -41,6 +41,7 @@ extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
 extern void sh73a0_pm_init(void);
+extern void sh73a0_secondary_vector(void);
 extern struct clk sh73a0_extal1_clk;
 extern struct clk sh73a0_extal2_clk;
 extern struct clk sh73a0_extcki_clk;
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 5c5bcb5..430b44e 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -41,9 +41,6 @@ static void __iomem *scu_base_addr(void)
 	return (void __iomem *)0xf0000000;
 }
 
-static DEFINE_SPINLOCK(scu_lock);
-static unsigned long tmp;
-
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
 void __init sh73a0_register_twd(void)
@@ -52,20 +49,6 @@ void __init sh73a0_register_twd(void)
 }
 #endif
 
-static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
-{
-	void __iomem *scu_base = scu_base_addr();
-
-	spin_lock(&scu_lock);
-	tmp = __raw_readl(scu_base + 8);
-	tmp &= ~clr;
-	tmp |= set;
-	spin_unlock(&scu_lock);
-
-	/* disable cache coherency after releasing the lock */
-	__raw_writel(tmp, scu_base + 8);
-}
-
 static unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -82,9 +65,6 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 {
 	cpu = cpu_logical_map(cpu);
 
-	/* enable cache coherency */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
-
 	if (((__raw_readl(PSTR) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, WUPCR);	/* wake up */
 	else
@@ -95,16 +75,14 @@ static int __cpuinit sh73a0_boot_secondary(unsigned int cpu, struct task_struct
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int cpu = cpu_logical_map(0);
-
 	scu_enable(scu_base_addr());
 
-	/* Map the reset vector (in headsmp.S) */
+	/* Map the reset vector (in headsmp-sh73a0.S) */
 	__raw_writel(0, APARMBAREA);      /* 4k */
-	__raw_writel(__pa(shmobile_secondary_vector), SBAR);
+	__raw_writel(__pa(sh73a0_secondary_vector), SBAR);
 
-	/* enable cache coherency on CPU0 */
-	modify_scu_cpu_psr(0, 3 << (cpu * 8));
+	/* enable cache coherency on booting CPU */
+	scu_power_mode(scu_base_addr(), SCU_PM_NORMAL);
 }
 
 static void __init sh73a0_smp_init_cpus(void)
-- 
1.7.10.4

[PATCH 11/15] ARM: SH-Mobile: sh73a0: Add CPU Hotplug

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Add the capability to add and remove CPUs on the fly.
The Cortex-A9 offers the possibility to take single cores out of the
MP Core. We add this capabilty taking care that caches are kept
coherent. For verifying the shutdown we rely on the internal SH73A0
Power Status Register PSTR.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-sh73a0.c |   36 +++++++++++++++++++++++++++++------
 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 430b44e..9812ea3 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
+#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <mach/sh73a0.h>
 #include <asm/smp_scu.h>
@@ -36,6 +37,8 @@
 #define SBAR		IOMEM(0xe6180020)
 #define APARMBAREA	IOMEM(0xe6f10020)
 
+#define PSTR_SHUTDOWN_MODE	3
+
 static void __iomem *scu_base_addr(void)
 {
 	return (void __iomem *)0xf0000000;
@@ -92,16 +95,20 @@ static void __init sh73a0_smp_init_cpus(void)
 	shmobile_smp_init_cpus(ncores);
 }
 
-static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
+#ifdef CONFIG_HOTPLUG_CPU
+static int sh73a0_cpu_kill(unsigned int cpu)
 {
+
 	int k;
+	u32 pstr;
 
-	/* this function is running on another CPU than the offline target,
-	 * here we need wait for shutdown code in platform_cpu_die() to
-	 * finish before asking SoC-specific code to power off the CPU core.
+	/*
+	 * wait until the power status register confirms the shutdown of the
+	 * offline target
 	 */
 	for (k = 0; k < 1000; k++) {
-		if (shmobile_cpu_is_dead(cpu))
+		pstr = (__raw_readl(PSTR) >> (4 * cpu)) & 3;
+		if (pstr = PSTR_SHUTDOWN_MODE)
 			return 1;
 
 		mdelay(1);
@@ -110,6 +117,23 @@ static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
 	return 0;
 }
 
+static void sh73a0_cpu_die(unsigned int cpu)
+{
+	/*
+	 * The ARM MPcore does not issue a cache coherency request for the L1
+	 * cache when powering off single CPUs. We must take care of this and
+	 * further caches.
+	 */
+	dsb();
+	flush_cache_all();
+
+	/* Set power off mode. This takes the CPU out of the MP cluster */
+	scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF);
+
+	/* Enter shutdown mode */
+	cpu_do_idle();
+}
+#endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations sh73a0_smp_ops __initdata = {
 	.smp_init_cpus		= sh73a0_smp_init_cpus,
@@ -118,7 +142,7 @@ struct smp_operations sh73a0_smp_ops __initdata = {
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= sh73a0_cpu_kill,
-	.cpu_die		= shmobile_cpu_die,
+	.cpu_die		= sh73a0_cpu_die,
 	.cpu_disable		= shmobile_cpu_disable,
 #endif
 };
-- 
1.7.10.4

[PATCH 11/15] ARM: SH-Mobile: sh73a0: Add CPU Hotplug

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Add the capability to add and remove CPUs on the fly.
The Cortex-A9 offers the possibility to take single cores out of the
MP Core. We add this capabilty taking care that caches are kept
coherent. For verifying the shutdown we rely on the internal SH73A0
Power Status Register PSTR.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-sh73a0.c |   36 +++++++++++++++++++++++++++++------
 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 430b44e..9812ea3 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -25,6 +25,7 @@
 #include <linux/delay.h>
 #include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
+#include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <mach/sh73a0.h>
 #include <asm/smp_scu.h>
@@ -36,6 +37,8 @@
 #define SBAR		IOMEM(0xe6180020)
 #define APARMBAREA	IOMEM(0xe6f10020)
 
+#define PSTR_SHUTDOWN_MODE	3
+
 static void __iomem *scu_base_addr(void)
 {
 	return (void __iomem *)0xf0000000;
@@ -92,16 +95,20 @@ static void __init sh73a0_smp_init_cpus(void)
 	shmobile_smp_init_cpus(ncores);
 }
 
-static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
+#ifdef CONFIG_HOTPLUG_CPU
+static int sh73a0_cpu_kill(unsigned int cpu)
 {
+
 	int k;
+	u32 pstr;
 
-	/* this function is running on another CPU than the offline target,
-	 * here we need wait for shutdown code in platform_cpu_die() to
-	 * finish before asking SoC-specific code to power off the CPU core.
+	/*
+	 * wait until the power status register confirms the shutdown of the
+	 * offline target
 	 */
 	for (k = 0; k < 1000; k++) {
-		if (shmobile_cpu_is_dead(cpu))
+		pstr = (__raw_readl(PSTR) >> (4 * cpu)) & 3;
+		if (pstr == PSTR_SHUTDOWN_MODE)
 			return 1;
 
 		mdelay(1);
@@ -110,6 +117,23 @@ static int __maybe_unused sh73a0_cpu_kill(unsigned int cpu)
 	return 0;
 }
 
+static void sh73a0_cpu_die(unsigned int cpu)
+{
+	/*
+	 * The ARM MPcore does not issue a cache coherency request for the L1
+	 * cache when powering off single CPUs. We must take care of this and
+	 * further caches.
+	 */
+	dsb();
+	flush_cache_all();
+
+	/* Set power off mode. This takes the CPU out of the MP cluster */
+	scu_power_mode(scu_base_addr(), SCU_PM_POWEROFF);
+
+	/* Enter shutdown mode */
+	cpu_do_idle();
+}
+#endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations sh73a0_smp_ops __initdata = {
 	.smp_init_cpus		= sh73a0_smp_init_cpus,
@@ -118,7 +142,7 @@ struct smp_operations sh73a0_smp_ops __initdata = {
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= sh73a0_cpu_kill,
-	.cpu_die		= shmobile_cpu_die,
+	.cpu_die		= sh73a0_cpu_die,
 	.cpu_disable		= shmobile_cpu_disable,
 #endif
 };
-- 
1.7.10.4

[PATCH 12/15] ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT

[Simon Horman]

This allows the GIC interrupt controller of the sh73a0 SoC to be
initialised using a flattened device tree blob.

It does not allow the INTC interrupt controller which is also present on
the sh73a0 SoC to be enabled via device tree.  Nor does it handle sharing
of interrupts between the GIC and INTC interrupt controllers.

This limits the usefulness of this code to applications which only wish to
access devices which use interrupts that can be handled by the GIC
interrupt controller. Other applications should, for now, continue using
non-device tree initialisation of the sh72a0 interrupt controllers.

Includes update to use irqchip_init() by Thierry Reding

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi                |   33 ++++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/intc-sh73a0.c         |    9 +++++++
 3 files changed, 43 insertions(+)
 create mode 100644 arch/arm/boot/dts/sh73a0.dtsi

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
new file mode 100644
index 0000000..7dae1f4
--- /dev/null
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -0,0 +1,33 @@
+/*
+ * Device Tree Source for the SH73A0 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,sh73a0";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	gic: interrupt-controller@f0001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0xf0001000 0x1000>,
+		      <0xf0000100 0x100>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 4b1af93..e2ba16b 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -34,6 +34,7 @@ extern struct clk sh7372_extal1_clk;
 extern struct clk sh7372_extal2_clk;
 
 extern void sh73a0_init_irq(void);
+extern void sh73a0_init_irq_dt(void);
 extern void sh73a0_map_io(void);
 extern void sh73a0_earlytimer_init(void);
 extern void sh73a0_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 45973b5..91faba6 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
+#include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
 #include <mach/intc.h>
 #include <mach/irqs.h>
@@ -459,3 +460,11 @@ void __init sh73a0_init_irq(void)
 	sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
 	setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
 }
+
+#ifdef CONFIG_OF
+void __init sh73a0_init_irq_dt(void)
+{
+	irqchip_init();
+	gic_arch_extn.irq_set_wake = sh73a0_set_wake;
+}
+#endif
-- 
1.7.10.4

[PATCH 12/15] ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT

[Simon Horman]

This allows the GIC interrupt controller of the sh73a0 SoC to be
initialised using a flattened device tree blob.

It does not allow the INTC interrupt controller which is also present on
the sh73a0 SoC to be enabled via device tree.  Nor does it handle sharing
of interrupts between the GIC and INTC interrupt controllers.

This limits the usefulness of this code to applications which only wish to
access devices which use interrupts that can be handled by the GIC
interrupt controller. Other applications should, for now, continue using
non-device tree initialisation of the sh72a0 interrupt controllers.

Includes update to use irqchip_init() by Thierry Reding

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi                |   33 ++++++++++++++++++++++++++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/intc-sh73a0.c         |    9 +++++++
 3 files changed, 43 insertions(+)
 create mode 100644 arch/arm/boot/dts/sh73a0.dtsi

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
new file mode 100644
index 0000000..7dae1f4
--- /dev/null
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -0,0 +1,33 @@
+/*
+ * Device Tree Source for the SH73A0 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,sh73a0";
+
+	cpus {
+		cpu at 0 {
+			compatible = "arm,cortex-a9";
+		};
+		cpu at 1 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	gic: interrupt-controller at f0001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0xf0001000 0x1000>,
+		      <0xf0000100 0x100>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 4b1af93..e2ba16b 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -34,6 +34,7 @@ extern struct clk sh7372_extal1_clk;
 extern struct clk sh7372_extal2_clk;
 
 extern void sh73a0_init_irq(void);
+extern void sh73a0_init_irq_dt(void);
 extern void sh73a0_map_io(void);
 extern void sh73a0_earlytimer_init(void);
 extern void sh73a0_add_early_devices(void);
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 45973b5..91faba6 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
+#include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
 #include <mach/intc.h>
 #include <mach/irqs.h>
@@ -459,3 +460,11 @@ void __init sh73a0_init_irq(void)
 	sh73a0_pint1_cascade.handler = sh73a0_pint1_demux;
 	setup_irq(gic_spi(34), &sh73a0_pint1_cascade);
 }
+
+#ifdef CONFIG_OF
+void __init sh73a0_init_irq_dt(void)
+{
+	irqchip_init();
+	gic_arch_extn.irq_set_wake = sh73a0_set_wake;
+}
+#endif
-- 
1.7.10.4

[PATCH 13/15] ARM: mach-shmobile: sh73a0: Minimal setup using DT

[Simon Horman]

Allow a minimal setup of the sh73a0 SoC using a flattened device tree.
In particular, Configure the i2c controllers using a flattened device tree.

SCI serial controller and CMT clock source, whose drivers do not yet
support configuration using a flattened device tree, are still configured
using C code in order to allow booting of a board with this SoC.

*** Please note that the clock initialisation scheme used in
    this patch does not currently work with SMP as there
    is a yet to be resolved lock-up in workqueue initialisation.

    CONFIG_SMP must be disabled when using this code. ***

Includes update from Thierry Reding to no longer use gic_handle_irq()

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

fix
---
 arch/arm/boot/dts/sh73a0.dtsi                |   60 +++++++++++++++++++++++++
 arch/arm/mach-shmobile/clock-sh73a0.c        |   12 +++++
 arch/arm/mach-shmobile/include/mach/common.h |    2 +
 arch/arm/mach-shmobile/setup-sh73a0.c        |   62 +++++++++++++++++++++++++-
 4 files changed, 135 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 7dae1f4..721f486 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -30,4 +30,64 @@
 		reg = <0xf0001000 0x1000>,
 		      <0xf0000100 0x100>;
 	};
+
+	i2c0: i2c@0xe6820000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6820000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 0x4
+			      0 168 0x4
+			      0 169 0x4
+			      0 170 0x4>;
+	};
+
+	i2c1: i2c@0xe6822000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6822000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 51 0x4
+			      0 52 0x4
+			      0 53 0x4
+			      0 54 0x4>;
+	};
+
+	i2c2: i2c@0xe6824000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6824000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 171 0x4
+			      0 172 0x4
+			      0 173 0x4
+			      0 174 0x4>;
+	};
+
+	i2c3: i2c@0xe6826000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6826000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 183 0x4
+			      0 184 0x4
+			      0 185 0x4
+			      0 186 0x4>;
+	};
+
+	i2c4: i2c@0xe6828000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6828000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 187 0x4
+			      0 188 0x4
+			      0 189 0x4
+			      0 190 0x4>;
+	};
 };
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 5f57701..eab2667 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -525,6 +525,13 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
 };
 
+/* The lookups structure below includes duplicate entries for some clocks
+ * with alternate names.
+ * - The traditional name used when a device is initialised with platform data
+ * - The name used when a device is initialised using device tree
+ * The longer-term aim is to remove these duplicates, and indeed the
+ * lookups table entirely, by describing clocks using device tree.
+ */
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("r_clk", &r_clk),
@@ -545,6 +552,7 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
+	CLKDEV_DEV_ID("e6824000.i2c", &mstp_clks[MSTP001]), /* I2C2 */
 	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
 	CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
 	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
@@ -553,6 +561,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+	CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
 	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
@@ -569,6 +578,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
 	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
+	CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
 	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
@@ -579,7 +589,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
 	CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
+	CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
+	CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */
 	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
 };
 
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e2ba16b..64c0622 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -38,7 +38,9 @@ extern void sh73a0_init_irq_dt(void);
 extern void sh73a0_map_io(void);
 extern void sh73a0_earlytimer_init(void);
 extern void sh73a0_add_early_devices(void);
+extern void sh73a0_add_early_devices_dt(void);
 extern void sh73a0_add_standard_devices(void);
+extern void sh73a0_add_standard_devices_dt(void);
 extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
 extern void sh73a0_pm_init(void);
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 8c2d642..f7ecb0b 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
@@ -754,7 +755,7 @@ static struct platform_device pmu_device = {
 	.resource	= pmu_resources,
 };
 
-static struct platform_device *sh73a0_early_devices[] __initdata = {
+static struct platform_device *sh73a0_early_devices_dt[] __initdata = {
 	&scif0_device,
 	&scif1_device,
 	&scif2_device,
@@ -765,6 +766,9 @@ static struct platform_device *sh73a0_early_devices[] __initdata = {
 	&scif7_device,
 	&scif8_device,
 	&cmt10_device,
+};
+
+static struct platform_device *sh73a0_early_devices[] __initdata = {
 	&tmu00_device,
 	&tmu01_device,
 };
@@ -787,6 +791,8 @@ void __init sh73a0_add_standard_devices(void)
 	/* Clear software reset bit on SY-DMAC module */
 	__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
 
+	platform_add_devices(sh73a0_early_devices_dt,
+			    ARRAY_SIZE(sh73a0_early_devices_dt));
 	platform_add_devices(sh73a0_early_devices,
 			    ARRAY_SIZE(sh73a0_early_devices));
 	platform_add_devices(sh73a0_late_devices,
@@ -805,9 +811,63 @@ void __init sh73a0_earlytimer_init(void)
 
 void __init sh73a0_add_early_devices(void)
 {
+	early_platform_add_devices(sh73a0_early_devices_dt,
+				   ARRAY_SIZE(sh73a0_early_devices_dt));
 	early_platform_add_devices(sh73a0_early_devices,
 				   ARRAY_SIZE(sh73a0_early_devices));
 
 	/* setup early console here as well */
 	shmobile_setup_console();
 }
+
+#ifdef CONFIG_USE_OF
+
+/* Please note that the clock initialisation shcheme used in
+ * sh73a0_add_early_devices_dt() and sh73a0_add_standard_devices_dt()
+ * does not work with SMP as there is a yet to be resolved lock-up in
+ * workqueue initialisation.
+ *
+ * CONFIG_SMP should be disabled when using this code.
+ */
+
+void __init sh73a0_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */
+
+	early_platform_add_devices(sh73a0_early_devices_dt,
+				   ARRAY_SIZE(sh73a0_early_devices_dt));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
+
+static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
+	{},
+};
+
+void __init sh73a0_add_standard_devices_dt(void)
+{
+	/* clocks are setup late during boot in the case of DT */
+	sh73a0_clock_init();
+
+	platform_add_devices(sh73a0_early_devices_dt,
+			     ARRAY_SIZE(sh73a0_early_devices_dt));
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     sh73a0_auxdata_lookup, NULL);
+}
+
+static const char *sh73a0_boards_compat_dt[] __initdata = {
+	"renesas,sh73a0",
+	NULL,
+};
+
+DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices_dt,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq_dt,
+	.init_machine	= sh73a0_add_standard_devices_dt,
+	.init_time	= shmobile_timer_init,
+	.dt_compat	= sh73a0_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
-- 
1.7.10.4

[PATCH 13/15] ARM: mach-shmobile: sh73a0: Minimal setup using DT

[Simon Horman]

Allow a minimal setup of the sh73a0 SoC using a flattened device tree.
In particular, Configure the i2c controllers using a flattened device tree.

SCI serial controller and CMT clock source, whose drivers do not yet
support configuration using a flattened device tree, are still configured
using C code in order to allow booting of a board with this SoC.

*** Please note that the clock initialisation scheme used in
    this patch does not currently work with SMP as there
    is a yet to be resolved lock-up in workqueue initialisation.

    CONFIG_SMP must be disabled when using this code. ***

Includes update from Thierry Reding to no longer use gic_handle_irq()

Cc: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

fix
---
 arch/arm/boot/dts/sh73a0.dtsi                |   60 +++++++++++++++++++++++++
 arch/arm/mach-shmobile/clock-sh73a0.c        |   12 +++++
 arch/arm/mach-shmobile/include/mach/common.h |    2 +
 arch/arm/mach-shmobile/setup-sh73a0.c        |   62 +++++++++++++++++++++++++-
 4 files changed, 135 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 7dae1f4..721f486 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -30,4 +30,64 @@
 		reg = <0xf0001000 0x1000>,
 		      <0xf0000100 0x100>;
 	};
+
+	i2c0: i2c at 0xe6820000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6820000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 0x4
+			      0 168 0x4
+			      0 169 0x4
+			      0 170 0x4>;
+	};
+
+	i2c1: i2c at 0xe6822000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6822000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 51 0x4
+			      0 52 0x4
+			      0 53 0x4
+			      0 54 0x4>;
+	};
+
+	i2c2: i2c at 0xe6824000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6824000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 171 0x4
+			      0 172 0x4
+			      0 173 0x4
+			      0 174 0x4>;
+	};
+
+	i2c3: i2c at 0xe6826000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6826000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 183 0x4
+			      0 184 0x4
+			      0 185 0x4
+			      0 186 0x4>;
+	};
+
+	i2c4: i2c at 0xe6828000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0xe6828000 0x425>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 187 0x4
+			      0 188 0x4
+			      0 189 0x4
+			      0 190 0x4>;
+	};
 };
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 5f57701..eab2667 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -525,6 +525,13 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
 };
 
+/* The lookups structure below includes duplicate entries for some clocks
+ * with alternate names.
+ * - The traditional name used when a device is initialised with platform data
+ * - The name used when a device is initialised using device tree
+ * The longer-term aim is to remove these duplicates, and indeed the
+ * lookups table entirely, by describing clocks using device tree.
+ */
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("r_clk", &r_clk),
@@ -545,6 +552,7 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
+	CLKDEV_DEV_ID("e6824000.i2c", &mstp_clks[MSTP001]), /* I2C2 */
 	CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
 	CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
 	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
@@ -553,6 +561,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+	CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
 	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
@@ -569,6 +578,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
 	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
+	CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */
 	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
@@ -579,7 +589,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
 	CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
+	CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
+	CLKDEV_DEV_ID("e6828000.i2c", &mstp_clks[MSTP410]), /* I2C4 */
 	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
 };
 
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e2ba16b..64c0622 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -38,7 +38,9 @@ extern void sh73a0_init_irq_dt(void);
 extern void sh73a0_map_io(void);
 extern void sh73a0_earlytimer_init(void);
 extern void sh73a0_add_early_devices(void);
+extern void sh73a0_add_early_devices_dt(void);
 extern void sh73a0_add_standard_devices(void);
+extern void sh73a0_add_standard_devices_dt(void);
 extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
 extern void sh73a0_pm_init(void);
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 8c2d642..f7ecb0b 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
@@ -754,7 +755,7 @@ static struct platform_device pmu_device = {
 	.resource	= pmu_resources,
 };
 
-static struct platform_device *sh73a0_early_devices[] __initdata = {
+static struct platform_device *sh73a0_early_devices_dt[] __initdata = {
 	&scif0_device,
 	&scif1_device,
 	&scif2_device,
@@ -765,6 +766,9 @@ static struct platform_device *sh73a0_early_devices[] __initdata = {
 	&scif7_device,
 	&scif8_device,
 	&cmt10_device,
+};
+
+static struct platform_device *sh73a0_early_devices[] __initdata = {
 	&tmu00_device,
 	&tmu01_device,
 };
@@ -787,6 +791,8 @@ void __init sh73a0_add_standard_devices(void)
 	/* Clear software reset bit on SY-DMAC module */
 	__raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2);
 
+	platform_add_devices(sh73a0_early_devices_dt,
+			    ARRAY_SIZE(sh73a0_early_devices_dt));
 	platform_add_devices(sh73a0_early_devices,
 			    ARRAY_SIZE(sh73a0_early_devices));
 	platform_add_devices(sh73a0_late_devices,
@@ -805,9 +811,63 @@ void __init sh73a0_earlytimer_init(void)
 
 void __init sh73a0_add_early_devices(void)
 {
+	early_platform_add_devices(sh73a0_early_devices_dt,
+				   ARRAY_SIZE(sh73a0_early_devices_dt));
 	early_platform_add_devices(sh73a0_early_devices,
 				   ARRAY_SIZE(sh73a0_early_devices));
 
 	/* setup early console here as well */
 	shmobile_setup_console();
 }
+
+#ifdef CONFIG_USE_OF
+
+/* Please note that the clock initialisation shcheme used in
+ * sh73a0_add_early_devices_dt() and sh73a0_add_standard_devices_dt()
+ * does not work with SMP as there is a yet to be resolved lock-up in
+ * workqueue initialisation.
+ *
+ * CONFIG_SMP should be disabled when using this code.
+ */
+
+void __init sh73a0_add_early_devices_dt(void)
+{
+	shmobile_setup_delay(1196, 44, 46); /* Cortex-A9 @ 1196MHz */
+
+	early_platform_add_devices(sh73a0_early_devices_dt,
+				   ARRAY_SIZE(sh73a0_early_devices_dt));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
+
+static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
+	{},
+};
+
+void __init sh73a0_add_standard_devices_dt(void)
+{
+	/* clocks are setup late during boot in the case of DT */
+	sh73a0_clock_init();
+
+	platform_add_devices(sh73a0_early_devices_dt,
+			     ARRAY_SIZE(sh73a0_early_devices_dt));
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     sh73a0_auxdata_lookup, NULL);
+}
+
+static const char *sh73a0_boards_compat_dt[] __initdata = {
+	"renesas,sh73a0",
+	NULL,
+};
+
+DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices_dt,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq_dt,
+	.init_machine	= sh73a0_add_standard_devices_dt,
+	.init_time	= shmobile_timer_init,
+	.dt_compat	= sh73a0_boards_compat_dt,
+MACHINE_END
+#endif /* CONFIG_USE_OF */
-- 
1.7.10.4

[PATCH 14/15] ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT

[Simon Horman]

This device also requires a voltage regulator which
should be defined in a board-specific maner. An example
dts snipped follows.

/ {
	fixedregulator1v8: fixedregulator@0 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};
};

&mmcif {
	vmmc-supply = <&fixedregulator1v8>;
	vqmmc-supply = <&fixedregulator1v8>;
};

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-reference.dtsi |   24 ++++++++++++++++++++++++
 arch/arm/mach-shmobile/clock-sh73a0.c   |    1 +
 2 files changed, 25 insertions(+)
 create mode 100644 arch/arm/boot/dts/sh73a0-reference.dtsi

diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi b/arch/arm/boot/dts/sh73a0-reference.dtsi
new file mode 100644
index 0000000..d4bb012
--- /dev/null
+++ b/arch/arm/boot/dts/sh73a0-reference.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Device Tree Source for the SH73A0 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "sh73a0.dtsi"
+
+/ {
+	compatible = "renesas,sh73a0";
+
+	mmcif: mmcif@0x10010000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 140 0x4
+			      0 141 0x4>;
+		reg-io-width = <4>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index eab2667..afa5423 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -583,6 +583,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
+	CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
 	CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
 	CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
-- 
1.7.10.4

[PATCH 14/15] ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT

[Simon Horman]

This device also requires a voltage regulator which
should be defined in a board-specific maner. An example
dts snipped follows.

/ {
	fixedregulator1v8: fixedregulator at 0 {
		compatible = "regulator-fixed";
		regulator-name = "fixed-1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};
};

&mmcif {
	vmmc-supply = <&fixedregulator1v8>;
	vqmmc-supply = <&fixedregulator1v8>;
};

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-reference.dtsi |   24 ++++++++++++++++++++++++
 arch/arm/mach-shmobile/clock-sh73a0.c   |    1 +
 2 files changed, 25 insertions(+)
 create mode 100644 arch/arm/boot/dts/sh73a0-reference.dtsi

diff --git a/arch/arm/boot/dts/sh73a0-reference.dtsi b/arch/arm/boot/dts/sh73a0-reference.dtsi
new file mode 100644
index 0000000..d4bb012
--- /dev/null
+++ b/arch/arm/boot/dts/sh73a0-reference.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Device Tree Source for the SH73A0 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "sh73a0.dtsi"
+
+/ {
+	compatible = "renesas,sh73a0";
+
+	mmcif: mmcif at 0x10010000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 140 0x4
+			      0 141 0x4>;
+		reg-io-width = <4>;
+	};
+};
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index eab2667..afa5423 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -583,6 +583,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
+	CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
 	CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
 	CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
-- 
1.7.10.4

[PATCH 15/15] ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED()

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch tidyup scif .irqs settings by using
SCIx_IRQ_MUXED() macro.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7779.c |   18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index a181ced..7e87ab3 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -66,8 +66,7 @@ static struct plat_sci_port scif0_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(88), gic_spi(88),
-			    gic_spi(88), gic_spi(88) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(88)),
 };
 
 static struct platform_device scif0_device = {
@@ -84,8 +83,7 @@ static struct plat_sci_port scif1_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(89), gic_spi(89),
-			    gic_spi(89), gic_spi(89) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(89)),
 };
 
 static struct platform_device scif1_device = {
@@ -102,8 +100,7 @@ static struct plat_sci_port scif2_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(90), gic_spi(90),
-			    gic_spi(90), gic_spi(90) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(90)),
 };
 
 static struct platform_device scif2_device = {
@@ -120,8 +117,7 @@ static struct plat_sci_port scif3_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(91), gic_spi(91),
-			    gic_spi(91), gic_spi(91) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(91)),
 };
 
 static struct platform_device scif3_device = {
@@ -138,8 +134,7 @@ static struct plat_sci_port scif4_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(92), gic_spi(92),
-			    gic_spi(92), gic_spi(92) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(92)),
 };
 
 static struct platform_device scif4_device = {
@@ -156,8 +151,7 @@ static struct plat_sci_port scif5_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(93), gic_spi(93),
-			    gic_spi(93), gic_spi(93) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(93)),
 };
 
 static struct platform_device scif5_device = {
-- 
1.7.10.4

[PATCH 15/15] ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED()

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch tidyup scif .irqs settings by using
SCIx_IRQ_MUXED() macro.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/setup-r8a7779.c |   18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index a181ced..7e87ab3 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -66,8 +66,7 @@ static struct plat_sci_port scif0_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(88), gic_spi(88),
-			    gic_spi(88), gic_spi(88) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(88)),
 };
 
 static struct platform_device scif0_device = {
@@ -84,8 +83,7 @@ static struct plat_sci_port scif1_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(89), gic_spi(89),
-			    gic_spi(89), gic_spi(89) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(89)),
 };
 
 static struct platform_device scif1_device = {
@@ -102,8 +100,7 @@ static struct plat_sci_port scif2_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(90), gic_spi(90),
-			    gic_spi(90), gic_spi(90) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(90)),
 };
 
 static struct platform_device scif2_device = {
@@ -120,8 +117,7 @@ static struct plat_sci_port scif3_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(91), gic_spi(91),
-			    gic_spi(91), gic_spi(91) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(91)),
 };
 
 static struct platform_device scif3_device = {
@@ -138,8 +134,7 @@ static struct plat_sci_port scif4_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(92), gic_spi(92),
-			    gic_spi(92), gic_spi(92) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(92)),
 };
 
 static struct platform_device scif4_device = {
@@ -156,8 +151,7 @@ static struct plat_sci_port scif5_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { gic_spi(93), gic_spi(93),
-			    gic_spi(93), gic_spi(93) },
+	.irqs		= SCIx_IRQ_MUXED(gic_spi(93)),
 };
 
 static struct platform_device scif5_device = {
-- 
1.7.10.4

[PATCH 01/15] ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c

[Sachin Kamat]

Hi Simon,

You seem to have changed the authorship of this patch.

Original one at:
https://patchwork.kernel.org/patch/1771091/

Regards
Sachin

On 25 January 2013 07:43, Simon Horman <horms+renesas@verge.net.au> wrote:
> linux/dma-mapping.h was included twice.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>  arch/arm/mach-shmobile/setup-r8a7740.c |    1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
> index 03c69f9..9ef397d 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7740.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7740.c
> @@ -27,7 +27,6 @@
>  #include <linux/serial_sci.h>
>  #include <linux/sh_dma.h>
>  #include <linux/sh_timer.h>
> -#include <linux/dma-mapping.h>
>  #include <mach/dma-register.h>
>  #include <mach/r8a7740.h>
>  #include <mach/pm-rmobile.h>
> --
> 1.7.10.4
>

Re: [PATCH 01/15] ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c

[Sachin Kamat]

Hi Simon,

You seem to have changed the authorship of this patch.

Original one at:
https://patchwork.kernel.org/patch/1771091/

Regards
Sachin

On 25 January 2013 07:43, Simon Horman <horms+renesas@verge.net.au> wrote:
> linux/dma-mapping.h was included twice.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>  arch/arm/mach-shmobile/setup-r8a7740.c |    1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
> index 03c69f9..9ef397d 100644
> --- a/arch/arm/mach-shmobile/setup-r8a7740.c
> +++ b/arch/arm/mach-shmobile/setup-r8a7740.c
> @@ -27,7 +27,6 @@
>  #include <linux/serial_sci.h>
>  #include <linux/sh_dma.h>
>  #include <linux/sh_timer.h>
> -#include <linux/dma-mapping.h>
>  #include <mach/dma-register.h>
>  #include <mach/r8a7740.h>
>  #include <mach/pm-rmobile.h>
> --
> 1.7.10.4
>

Re: [PATCH 01/15] ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c

[Simon Horman]

On Fri, Jan 25, 2013 at 08:25:27AM +0530, Sachin Kamat wrote:
> Hi Simon,
> 
> You seem to have changed the authorship of this patch.

Sorry about that, I'll fix that up.

> Original one at:
> https://patchwork.kernel.org/patch/1771091/
> 
> Regards
> Sachin
> 
> On 25 January 2013 07:43, Simon Horman <horms+renesas@verge.net.au> wrote:
> > linux/dma-mapping.h was included twice.
> >
> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> >  arch/arm/mach-shmobile/setup-r8a7740.c |    1 -
> >  1 file changed, 1 deletion(-)
> >
> > diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
> > index 03c69f9..9ef397d 100644
> > --- a/arch/arm/mach-shmobile/setup-r8a7740.c
> > +++ b/arch/arm/mach-shmobile/setup-r8a7740.c
> > @@ -27,7 +27,6 @@
> >  #include <linux/serial_sci.h>
> >  #include <linux/sh_dma.h>
> >  #include <linux/sh_timer.h>
> > -#include <linux/dma-mapping.h>
> >  #include <mach/dma-register.h>
> >  #include <mach/r8a7740.h>
> >  #include <mach/pm-rmobile.h>
> > --
> > 1.7.10.4
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH 01/15] ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c

[Simon Horman]

On Fri, Jan 25, 2013 at 08:25:27AM +0530, Sachin Kamat wrote:
> Hi Simon,
> 
> You seem to have changed the authorship of this patch.

Sorry about that, I'll fix that up.

> Original one at:
> https://patchwork.kernel.org/patch/1771091/
> 
> Regards
> Sachin
> 
> On 25 January 2013 07:43, Simon Horman <horms+renesas@verge.net.au> wrote:
> > linux/dma-mapping.h was included twice.
> >
> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> > ---
> >  arch/arm/mach-shmobile/setup-r8a7740.c |    1 -
> >  1 file changed, 1 deletion(-)
> >
> > diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
> > index 03c69f9..9ef397d 100644
> > --- a/arch/arm/mach-shmobile/setup-r8a7740.c
> > +++ b/arch/arm/mach-shmobile/setup-r8a7740.c
> > @@ -27,7 +27,6 @@
> >  #include <linux/serial_sci.h>
> >  #include <linux/sh_dma.h>
> >  #include <linux/sh_timer.h>
> > -#include <linux/dma-mapping.h>
> >  #include <mach/dma-register.h>
> >  #include <mach/r8a7740.h>
> >  #include <mach/pm-rmobile.h>
> > --
> > 1.7.10.4
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [GIT PULL] Renesas ARM-based SoC for v3.9

[Simon Horman]

On Fri, Jan 25, 2013 at 11:13:18AM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following soc enhancements for 3.9.

It seems that this pull request includes a patch with the incorrect
author. I will fix that and send a fresh pull request ASAP.

[GIT PULL] Renesas ARM-based SoC for v3.9

[Simon Horman]

On Fri, Jan 25, 2013 at 11:13:18AM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following soc enhancements for 3.9.

It seems that this pull request includes a patch with the incorrect
author. I will fix that and send a fresh pull request ASAP.

[PATCH 01/15] ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c

[Sachin Kamat]

On 25 January 2013 09:08, Simon Horman <horms@verge.net.au> wrote:
> On Fri, Jan 25, 2013 at 08:25:27AM +0530, Sachin Kamat wrote:
>> Hi Simon,
>>
>> You seem to have changed the authorship of this patch.
>
> Sorry about that, I'll fix that up.

Thanks Simon :)


>
>> Original one at:
>> https://patchwork.kernel.org/patch/1771091/
>>
>> Regards
>> Sachin
>>
>> On 25 January 2013 07:43, Simon Horman <horms+renesas@verge.net.au> wrote:
>> > linux/dma-mapping.h was included twice.
>> >
>> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
>> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>> > ---
>> >  arch/arm/mach-shmobile/setup-r8a7740.c |    1 -
>> >  1 file changed, 1 deletion(-)



-- 
With warm regards,
Sachin

Re: [PATCH 01/15] ARM: shmobile: Remove duplicate inclusion of dma-mapping.h in setup-r8a7740.c

[Sachin Kamat]

On 25 January 2013 09:08, Simon Horman <horms@verge.net.au> wrote:
> On Fri, Jan 25, 2013 at 08:25:27AM +0530, Sachin Kamat wrote:
>> Hi Simon,
>>
>> You seem to have changed the authorship of this patch.
>
> Sorry about that, I'll fix that up.

Thanks Simon :)


>
>> Original one at:
>> https://patchwork.kernel.org/patch/1771091/
>>
>> Regards
>> Sachin
>>
>> On 25 January 2013 07:43, Simon Horman <horms+renesas@verge.net.au> wrote:
>> > linux/dma-mapping.h was included twice.
>> >
>> > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
>> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>> > ---
>> >  arch/arm/mach-shmobile/setup-r8a7740.c |    1 -
>> >  1 file changed, 1 deletion(-)



-- 
With warm regards,
Sachin

Re: [PATCH 12/15] ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT

[Mark Rutland]

On Fri, Jan 25, 2013 at 02:13:30AM +0000, Simon Horman wrote:
> This allows the GIC interrupt controller of the sh73a0 SoC to be
> initialised using a flattened device tree blob.
> 
> It does not allow the INTC interrupt controller which is also present on
> the sh73a0 SoC to be enabled via device tree.  Nor does it handle sharing
> of interrupts between the GIC and INTC interrupt controllers.
> 
> This limits the usefulness of this code to applications which only wish to
> access devices which use interrupts that can be handled by the GIC
> interrupt controller. Other applications should, for now, continue using
> non-device tree initialisation of the sh72a0 interrupt controllers.
> 
> Includes update to use irqchip_init() by Thierry Reding
> 
> Cc: Thierry Reding <thierry.reding@avionic-design.de>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>  arch/arm/boot/dts/sh73a0.dtsi                |   33 ++++++++++++++++++++++++++
>  arch/arm/mach-shmobile/include/mach/common.h |    1 +
>  arch/arm/mach-shmobile/intc-sh73a0.c         |    9 +++++++
>  3 files changed, 43 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sh73a0.dtsi
> 
> diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
> new file mode 100644
> index 0000000..7dae1f4
> --- /dev/null
> +++ b/arch/arm/boot/dts/sh73a0.dtsi
> @@ -0,0 +1,33 @@
> +/*
> + * Device Tree Source for the SH73A0 SoC
> + *
> + * Copyright (C) 2012 Renesas Solutions Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> +	compatible = "renesas,sh73a0";
> +
> +	cpus {
> +		cpu@0 {
> +			compatible = "arm,cortex-a9";
> +		};
> +		cpu@1 {
> +			compatible = "arm,cortex-a9";
> +		};
> +	};

It would be good the have reg and device_type properties set for the cpu nodes,
so they're guaranteed to work with the logical map.

[...]

Thanks,
Mark.

[PATCH 12/15] ARM: mach-shmobile: sh73a0: Allow initialisation of GIC by DT

[Mark Rutland]

On Fri, Jan 25, 2013 at 02:13:30AM +0000, Simon Horman wrote:
> This allows the GIC interrupt controller of the sh73a0 SoC to be
> initialised using a flattened device tree blob.
> 
> It does not allow the INTC interrupt controller which is also present on
> the sh73a0 SoC to be enabled via device tree.  Nor does it handle sharing
> of interrupts between the GIC and INTC interrupt controllers.
> 
> This limits the usefulness of this code to applications which only wish to
> access devices which use interrupts that can be handled by the GIC
> interrupt controller. Other applications should, for now, continue using
> non-device tree initialisation of the sh72a0 interrupt controllers.
> 
> Includes update to use irqchip_init() by Thierry Reding
> 
> Cc: Thierry Reding <thierry.reding@avionic-design.de>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
>  arch/arm/boot/dts/sh73a0.dtsi                |   33 ++++++++++++++++++++++++++
>  arch/arm/mach-shmobile/include/mach/common.h |    1 +
>  arch/arm/mach-shmobile/intc-sh73a0.c         |    9 +++++++
>  3 files changed, 43 insertions(+)
>  create mode 100644 arch/arm/boot/dts/sh73a0.dtsi
> 
> diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
> new file mode 100644
> index 0000000..7dae1f4
> --- /dev/null
> +++ b/arch/arm/boot/dts/sh73a0.dtsi
> @@ -0,0 +1,33 @@
> +/*
> + * Device Tree Source for the SH73A0 SoC
> + *
> + * Copyright (C) 2012 Renesas Solutions Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> +	compatible = "renesas,sh73a0";
> +
> +	cpus {
> +		cpu at 0 {
> +			compatible = "arm,cortex-a9";
> +		};
> +		cpu at 1 {
> +			compatible = "arm,cortex-a9";
> +		};
> +	};

It would be good the have reg and device_type properties set for the cpu nodes,
so they're guaranteed to work with the logical map.

[...]

Thanks,
Mark.

[GIT PULL] Renesas ARM-based SoC for v3.9 #2

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit 42dd581bc4dba82e8756bb881fa974742250b4c6:

  ARM: shmobile: Include sh73a0 DTSI in kzm9g (2013-01-25 09:26:33 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-boards2-for-v3.9

for you to fetch changes up to 2f27c40656fecba44e839c77910f75ee1024df62:

  ARM: shmobile: armadillo800eva: set clock rates before timer init (2013-01-30 13:24:07 +0900)

----------------------------------------------------------------
Second round of Renesas ARM-based SoC board changes for v3.9

* Fix to correct timer initialisation on the armadillo 800 eva board
  from Hideki EIRAKU

* The remaining of the changes relate to updating boards to
  make use of gpio_request_one(). These changes are from  Laurent Pinchart.

----------------------------------------------------------------
Hideki EIRAKU (1):
      ARM: shmobile: armadillo800eva: set clock rates before timer init

Laurent Pinchart (8):
      ARM: shmobile: ag5evm: Use gpio_request_one()
      ARM: shmobile: ap4evb: Use gpio_request_one()
      ARM: shmobile: armadillo800eva: Use gpio_request_one()
      ARM: shmobile: armadillo800eva: Use gpio_set_value() to set GPIO value
      ARM: shmobile: kota2: Use gpio_request_one()
      ARM: shmobile: bonito: Use gpio_request_one()
      ARM: shmobile: kzm9g: Use gpio_request_one()
      ARM: shmobile: mackerel: Use gpio_request_one()

 arch/arm/mach-shmobile/board-ag5evm.c          |   22 ++++-----
 arch/arm/mach-shmobile/board-ap4evb.c          |   33 ++++----------
 arch/arm/mach-shmobile/board-armadillo800eva.c |   57 +++++++++---------------
 arch/arm/mach-shmobile/board-bonito.c          |    7 ++-
 arch/arm/mach-shmobile/board-kota2.c           |    9 ++--
 arch/arm/mach-shmobile/board-kzm9g.c           |   18 +++-----
 arch/arm/mach-shmobile/board-mackerel.c        |   16 +++----
 7 files changed, 57 insertions(+), 105 deletions(-)

[GIT PULL] Renesas ARM-based SoC for v3.9 #2

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit 42dd581bc4dba82e8756bb881fa974742250b4c6:

  ARM: shmobile: Include sh73a0 DTSI in kzm9g (2013-01-25 09:26:33 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-boards2-for-v3.9

for you to fetch changes up to 2f27c40656fecba44e839c77910f75ee1024df62:

  ARM: shmobile: armadillo800eva: set clock rates before timer init (2013-01-30 13:24:07 +0900)

----------------------------------------------------------------
Second round of Renesas ARM-based SoC board changes for v3.9

* Fix to correct timer initialisation on the armadillo 800 eva board
  from Hideki EIRAKU

* The remaining of the changes relate to updating boards to
  make use of gpio_request_one(). These changes are from  Laurent Pinchart.

----------------------------------------------------------------
Hideki EIRAKU (1):
      ARM: shmobile: armadillo800eva: set clock rates before timer init

Laurent Pinchart (8):
      ARM: shmobile: ag5evm: Use gpio_request_one()
      ARM: shmobile: ap4evb: Use gpio_request_one()
      ARM: shmobile: armadillo800eva: Use gpio_request_one()
      ARM: shmobile: armadillo800eva: Use gpio_set_value() to set GPIO value
      ARM: shmobile: kota2: Use gpio_request_one()
      ARM: shmobile: bonito: Use gpio_request_one()
      ARM: shmobile: kzm9g: Use gpio_request_one()
      ARM: shmobile: mackerel: Use gpio_request_one()

 arch/arm/mach-shmobile/board-ag5evm.c          |   22 ++++-----
 arch/arm/mach-shmobile/board-ap4evb.c          |   33 ++++----------
 arch/arm/mach-shmobile/board-armadillo800eva.c |   57 +++++++++---------------
 arch/arm/mach-shmobile/board-bonito.c          |    7 ++-
 arch/arm/mach-shmobile/board-kota2.c           |    9 ++--
 arch/arm/mach-shmobile/board-kzm9g.c           |   18 +++-----
 arch/arm/mach-shmobile/board-mackerel.c        |   16 +++----
 7 files changed, 57 insertions(+), 105 deletions(-)

[PATCH 1/9] ARM: shmobile: ag5evm: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ag5evm.c |   22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 032d108..5e7fe15 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -479,11 +479,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 	static int power_gpio = -EINVAL;
 
 	if (power_gpio < 0) {
-		int ret = gpio_request(GPIO_PORT114, "sdhi1_power");
-		if (!ret) {
+		int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
+					   "sdhi1_power");
+		if (!ret)
 			power_gpio = GPIO_PORT114;
-			gpio_direction_output(power_gpio, 0);
-		}
 	}
 
 	/*
@@ -604,14 +603,11 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
 	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
 	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
-	gpio_request(GPIO_PORT208, NULL); /* Reset */
-	gpio_direction_output(GPIO_PORT208, 1);
+	gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
 
 	/* enable SMSC911X */
-	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
-	gpio_direction_input(GPIO_PORT144);
-	gpio_request(GPIO_PORT145, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT145, 1);
+	gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
+	gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
 
 	/* FSI A */
 	gpio_request(GPIO_FN_FSIACK, NULL);
@@ -626,15 +622,13 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
 
 	/* LCD panel */
-	gpio_request(GPIO_PORT217, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT217, 0);
+	gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
 	mdelay(1);
 	gpio_set_value(GPIO_PORT217, 1);
 	mdelay(100);
 
 	/* LCD backlight controller */
-	gpio_request(GPIO_PORT235, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT235, 0);
+	gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
 	lcd_backlight_set_brightness(0);
 
 	/* enable SDHI0 on CN15 [SD I/F] */
-- 
1.7.10.4

[PATCH 1/9] ARM: shmobile: ag5evm: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ag5evm.c |   22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 032d108..5e7fe15 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -479,11 +479,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 	static int power_gpio = -EINVAL;
 
 	if (power_gpio < 0) {
-		int ret = gpio_request(GPIO_PORT114, "sdhi1_power");
-		if (!ret) {
+		int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
+					   "sdhi1_power");
+		if (!ret)
 			power_gpio = GPIO_PORT114;
-			gpio_direction_output(power_gpio, 0);
-		}
 	}
 
 	/*
@@ -604,14 +603,11 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
 	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
 	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
-	gpio_request(GPIO_PORT208, NULL); /* Reset */
-	gpio_direction_output(GPIO_PORT208, 1);
+	gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
 
 	/* enable SMSC911X */
-	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
-	gpio_direction_input(GPIO_PORT144);
-	gpio_request(GPIO_PORT145, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT145, 1);
+	gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
+	gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
 
 	/* FSI A */
 	gpio_request(GPIO_FN_FSIACK, NULL);
@@ -626,15 +622,13 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
 
 	/* LCD panel */
-	gpio_request(GPIO_PORT217, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT217, 0);
+	gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
 	mdelay(1);
 	gpio_set_value(GPIO_PORT217, 1);
 	mdelay(100);
 
 	/* LCD backlight controller */
-	gpio_request(GPIO_PORT235, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT235, 0);
+	gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
 	lcd_backlight_set_brightness(0);
 
 	/* enable SDHI0 on CN15 [SD I/F] */
-- 
1.7.10.4

[PATCH 2/9] ARM: shmobile: ap4evb: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ap4evb.c |   33 +++++++++------------------------
 1 file changed, 9 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 70d287c..0c59464 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1046,9 +1046,7 @@ static int ts_get_pendown_state(void)
 
 	gpio_free(GPIO_TSC_IRQ);
 
-	gpio_request(GPIO_TSC_PORT, NULL);
-
-	gpio_direction_input(GPIO_TSC_PORT);
+	gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
 
 	val = gpio_get_value(GPIO_TSC_PORT);
 
@@ -1129,18 +1127,10 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_IRQ6_39,	NULL);
 
 	/* enable Debug switch (S6) */
-	gpio_request(GPIO_PORT32, NULL);
-	gpio_request(GPIO_PORT33, NULL);
-	gpio_request(GPIO_PORT34, NULL);
-	gpio_request(GPIO_PORT35, NULL);
-	gpio_direction_input(GPIO_PORT32);
-	gpio_direction_input(GPIO_PORT33);
-	gpio_direction_input(GPIO_PORT34);
-	gpio_direction_input(GPIO_PORT35);
-	gpio_export(GPIO_PORT32, 0);
-	gpio_export(GPIO_PORT33, 0);
-	gpio_export(GPIO_PORT34, 0);
-	gpio_export(GPIO_PORT35, 0);
+	gpio_request_one(GPIO_PORT32, GPIOF_IN | GPIOF_EXPORT, NULL);
+	gpio_request_one(GPIO_PORT33, GPIOF_IN | GPIOF_EXPORT, NULL);
+	gpio_request_one(GPIO_PORT34, GPIOF_IN | GPIOF_EXPORT, NULL);
+	gpio_request_one(GPIO_PORT35, GPIOF_IN | GPIOF_EXPORT, NULL);
 
 	/* SDHI0 */
 	gpio_request(GPIO_FN_SDHICD0, NULL);
@@ -1188,8 +1178,7 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
 	gpio_request(GPIO_FN_FSIAISLD,	NULL);
 	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
-	gpio_request(GPIO_PORT161,	NULL);
-	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+	gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
 	gpio_request(GPIO_PORT9, NULL);
 	gpio_request(GPIO_PORT10, NULL);
@@ -1197,8 +1186,7 @@ static void __init ap4evb_init(void)
 	gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
 
 	/* card detect pin for MMC slot (CN7) */
-	gpio_request(GPIO_PORT41, NULL);
-	gpio_direction_input(GPIO_PORT41);
+	gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
 
 	/* setup FSI2 port B (HDMI) */
 	gpio_request(GPIO_FN_FSIBCK, NULL);
@@ -1286,11 +1274,8 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_LCDDISP,  NULL);
 	gpio_request(GPIO_FN_LCDDCK,   NULL);
 
-	gpio_request(GPIO_PORT189, NULL); /* backlight */
-	gpio_direction_output(GPIO_PORT189, 1);
-
-	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT151, 1);
+	gpio_request_one(GPIO_PORT189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
+	gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	lcdc_info.clock_source			= LCDC_CLK_BUS;
 	lcdc_info.ch[0].interface_type		= RGB18;
-- 
1.7.10.4

[PATCH 2/9] ARM: shmobile: ap4evb: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ap4evb.c |   33 +++++++++------------------------
 1 file changed, 9 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 70d287c..0c59464 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1046,9 +1046,7 @@ static int ts_get_pendown_state(void)
 
 	gpio_free(GPIO_TSC_IRQ);
 
-	gpio_request(GPIO_TSC_PORT, NULL);
-
-	gpio_direction_input(GPIO_TSC_PORT);
+	gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
 
 	val = gpio_get_value(GPIO_TSC_PORT);
 
@@ -1129,18 +1127,10 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_IRQ6_39,	NULL);
 
 	/* enable Debug switch (S6) */
-	gpio_request(GPIO_PORT32, NULL);
-	gpio_request(GPIO_PORT33, NULL);
-	gpio_request(GPIO_PORT34, NULL);
-	gpio_request(GPIO_PORT35, NULL);
-	gpio_direction_input(GPIO_PORT32);
-	gpio_direction_input(GPIO_PORT33);
-	gpio_direction_input(GPIO_PORT34);
-	gpio_direction_input(GPIO_PORT35);
-	gpio_export(GPIO_PORT32, 0);
-	gpio_export(GPIO_PORT33, 0);
-	gpio_export(GPIO_PORT34, 0);
-	gpio_export(GPIO_PORT35, 0);
+	gpio_request_one(GPIO_PORT32, GPIOF_IN | GPIOF_EXPORT, NULL);
+	gpio_request_one(GPIO_PORT33, GPIOF_IN | GPIOF_EXPORT, NULL);
+	gpio_request_one(GPIO_PORT34, GPIOF_IN | GPIOF_EXPORT, NULL);
+	gpio_request_one(GPIO_PORT35, GPIOF_IN | GPIOF_EXPORT, NULL);
 
 	/* SDHI0 */
 	gpio_request(GPIO_FN_SDHICD0, NULL);
@@ -1188,8 +1178,7 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
 	gpio_request(GPIO_FN_FSIAISLD,	NULL);
 	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
-	gpio_request(GPIO_PORT161,	NULL);
-	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+	gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
 	gpio_request(GPIO_PORT9, NULL);
 	gpio_request(GPIO_PORT10, NULL);
@@ -1197,8 +1186,7 @@ static void __init ap4evb_init(void)
 	gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
 
 	/* card detect pin for MMC slot (CN7) */
-	gpio_request(GPIO_PORT41, NULL);
-	gpio_direction_input(GPIO_PORT41);
+	gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
 
 	/* setup FSI2 port B (HDMI) */
 	gpio_request(GPIO_FN_FSIBCK, NULL);
@@ -1286,11 +1274,8 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_LCDDISP,  NULL);
 	gpio_request(GPIO_FN_LCDDCK,   NULL);
 
-	gpio_request(GPIO_PORT189, NULL); /* backlight */
-	gpio_direction_output(GPIO_PORT189, 1);
-
-	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT151, 1);
+	gpio_request_one(GPIO_PORT189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
+	gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	lcdc_info.clock_source			= LCDC_CLK_BUS;
 	lcdc_info.ch[0].interface_type		= RGB18;
-- 
1.7.10.4

[PATCH 3/9] ARM: shmobile: armadillo800eva: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |   48 +++++++++---------------
 1 file changed, 17 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 5f179e1..efd6a36 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1000,16 +1000,12 @@ static void __init eva_init(void)
 	gpio_request(GPIO_FN_LCD0_DISP,		NULL);
 	gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
 
-	gpio_request(GPIO_PORT61, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT61, 1);
-
-	gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
-	gpio_direction_output(GPIO_PORT202, 0);
+	gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
+	gpio_request_one(GPIO_PORT202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
 	/* Touchscreen */
 	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
-	gpio_request(GPIO_PORT166,	NULL); /* TP_RST_B */
-	gpio_direction_output(GPIO_PORT166, 1);
+	gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
 
 	/* GETHER */
 	gpio_request(GPIO_FN_ET_CRS,		NULL);
@@ -1032,12 +1028,10 @@ static void __init eva_init(void)
 	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
 	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
 
-	gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
-	gpio_direction_output(GPIO_PORT18, 1);
+	gpio_request_one(GPIO_PORT18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
 
 	/* USB */
-	gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */
-	gpio_direction_input(GPIO_PORT159);
+	gpio_request_one(GPIO_PORT159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
 
 	if (gpio_get_value(GPIO_PORT159)) {
 		/* USB Host */
@@ -1051,8 +1045,7 @@ static void __init eva_init(void)
 		 * and select GPIO_PORT209 here
 		 */
 		gpio_request(GPIO_FN_IRQ7_PORT209, NULL);
-		gpio_request(GPIO_PORT209, NULL);
-		gpio_direction_input(GPIO_PORT209);
+		gpio_request_one(GPIO_PORT209, GPIOF_IN, NULL);
 
 		platform_device_register(&usbhsf_device);
 		usb = &usbhsf_device;
@@ -1067,12 +1060,9 @@ static void __init eva_init(void)
 	gpio_request(GPIO_FN_SDHI0_D3, NULL);
 	gpio_request(GPIO_FN_SDHI0_WP, NULL);
 
-	gpio_request(GPIO_PORT17, NULL);	/* SDHI0_18/33_B */
-	gpio_request(GPIO_PORT74, NULL);	/* SDHI0_PON */
-	gpio_request(GPIO_PORT75, NULL);	/* SDSLOT1_PON */
-	gpio_direction_output(GPIO_PORT17, 0);
-	gpio_direction_output(GPIO_PORT74, 1);
-	gpio_direction_output(GPIO_PORT75, 1);
+	gpio_request_one(GPIO_PORT17, GPIOF_OUT_INIT_LOW, NULL);  /* SDHI0_18/33_B */
+	gpio_request_one(GPIO_PORT74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */
+	gpio_request_one(GPIO_PORT75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */
 
 	/* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */
 
@@ -1109,12 +1099,10 @@ static void __init eva_init(void)
 	gpio_request(GPIO_FN_VIO_CKO,		NULL);
 
 	/* CON1/CON15 Camera */
-	gpio_request(GPIO_PORT173, NULL); /* STANDBY */
-	gpio_request(GPIO_PORT172, NULL); /* RST */
-	gpio_request(GPIO_PORT158, NULL); /* CAM_PON */
-	gpio_direction_output(GPIO_PORT173, 0);
-	gpio_direction_output(GPIO_PORT172, 1);
-	gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */
+	gpio_request_one(GPIO_PORT173, GPIOF_OUT_INIT_LOW, NULL);  /* STANDBY */
+	gpio_request_one(GPIO_PORT172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
+	/* see mt9t111_power() */
+	gpio_request_one(GPIO_PORT158, GPIOF_OUT_INIT_LOW, NULL);  /* CAM_PON */
 
 	/* FSI-WM8978 */
 	gpio_request(GPIO_FN_FSIAIBT,		NULL);
@@ -1141,15 +1129,13 @@ static void __init eva_init(void)
 	 * DBGMD/LCDC0/FSIA MUX
 	 * DBGMD_SELECT_B should be set after setting PFC Function.
 	 */
-	gpio_request(GPIO_PORT176, NULL);
-	gpio_direction_output(GPIO_PORT176, 1);
+	gpio_request_one(GPIO_PORT176, GPIOF_OUT_INIT_HIGH, NULL);
 
 	/*
 	 * We can switch CON8/CON14 by SW1.5,
 	 * but it needs after DBGMD_SELECT_B
 	 */
-	gpio_request(GPIO_PORT6, NULL);
-	gpio_direction_input(GPIO_PORT6);
+	gpio_request_one(GPIO_PORT6, GPIOF_IN, NULL);
 	if (gpio_get_value(GPIO_PORT6)) {
 		/* CON14 enable */
 	} else {
@@ -1163,8 +1149,8 @@ static void __init eva_init(void)
 		gpio_request(GPIO_FN_SDHI1_CD,	NULL);
 		gpio_request(GPIO_FN_SDHI1_WP,	NULL);
 
-		gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */
-		gpio_direction_output(GPIO_PORT16, 1);
+		/* SDSLOT2_PON */
+		gpio_request_one(GPIO_PORT16, GPIOF_OUT_INIT_HIGH, NULL);
 
 		platform_device_register(&sdhi1_device);
 	}
-- 
1.7.10.4

[PATCH 3/9] ARM: shmobile: armadillo800eva: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |   48 +++++++++---------------
 1 file changed, 17 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 5f179e1..efd6a36 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1000,16 +1000,12 @@ static void __init eva_init(void)
 	gpio_request(GPIO_FN_LCD0_DISP,		NULL);
 	gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
 
-	gpio_request(GPIO_PORT61, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT61, 1);
-
-	gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
-	gpio_direction_output(GPIO_PORT202, 0);
+	gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
+	gpio_request_one(GPIO_PORT202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
 	/* Touchscreen */
 	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
-	gpio_request(GPIO_PORT166,	NULL); /* TP_RST_B */
-	gpio_direction_output(GPIO_PORT166, 1);
+	gpio_request_one(GPIO_PORT166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
 
 	/* GETHER */
 	gpio_request(GPIO_FN_ET_CRS,		NULL);
@@ -1032,12 +1028,10 @@ static void __init eva_init(void)
 	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
 	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
 
-	gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
-	gpio_direction_output(GPIO_PORT18, 1);
+	gpio_request_one(GPIO_PORT18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
 
 	/* USB */
-	gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */
-	gpio_direction_input(GPIO_PORT159);
+	gpio_request_one(GPIO_PORT159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
 
 	if (gpio_get_value(GPIO_PORT159)) {
 		/* USB Host */
@@ -1051,8 +1045,7 @@ static void __init eva_init(void)
 		 * and select GPIO_PORT209 here
 		 */
 		gpio_request(GPIO_FN_IRQ7_PORT209, NULL);
-		gpio_request(GPIO_PORT209, NULL);
-		gpio_direction_input(GPIO_PORT209);
+		gpio_request_one(GPIO_PORT209, GPIOF_IN, NULL);
 
 		platform_device_register(&usbhsf_device);
 		usb = &usbhsf_device;
@@ -1067,12 +1060,9 @@ static void __init eva_init(void)
 	gpio_request(GPIO_FN_SDHI0_D3, NULL);
 	gpio_request(GPIO_FN_SDHI0_WP, NULL);
 
-	gpio_request(GPIO_PORT17, NULL);	/* SDHI0_18/33_B */
-	gpio_request(GPIO_PORT74, NULL);	/* SDHI0_PON */
-	gpio_request(GPIO_PORT75, NULL);	/* SDSLOT1_PON */
-	gpio_direction_output(GPIO_PORT17, 0);
-	gpio_direction_output(GPIO_PORT74, 1);
-	gpio_direction_output(GPIO_PORT75, 1);
+	gpio_request_one(GPIO_PORT17, GPIOF_OUT_INIT_LOW, NULL);  /* SDHI0_18/33_B */
+	gpio_request_one(GPIO_PORT74, GPIOF_OUT_INIT_HIGH, NULL); /* SDHI0_PON */
+	gpio_request_one(GPIO_PORT75, GPIOF_OUT_INIT_HIGH, NULL); /* SDSLOT1_PON */
 
 	/* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */
 
@@ -1109,12 +1099,10 @@ static void __init eva_init(void)
 	gpio_request(GPIO_FN_VIO_CKO,		NULL);
 
 	/* CON1/CON15 Camera */
-	gpio_request(GPIO_PORT173, NULL); /* STANDBY */
-	gpio_request(GPIO_PORT172, NULL); /* RST */
-	gpio_request(GPIO_PORT158, NULL); /* CAM_PON */
-	gpio_direction_output(GPIO_PORT173, 0);
-	gpio_direction_output(GPIO_PORT172, 1);
-	gpio_direction_output(GPIO_PORT158, 0); /* see mt9t111_power() */
+	gpio_request_one(GPIO_PORT173, GPIOF_OUT_INIT_LOW, NULL);  /* STANDBY */
+	gpio_request_one(GPIO_PORT172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
+	/* see mt9t111_power() */
+	gpio_request_one(GPIO_PORT158, GPIOF_OUT_INIT_LOW, NULL);  /* CAM_PON */
 
 	/* FSI-WM8978 */
 	gpio_request(GPIO_FN_FSIAIBT,		NULL);
@@ -1141,15 +1129,13 @@ static void __init eva_init(void)
 	 * DBGMD/LCDC0/FSIA MUX
 	 * DBGMD_SELECT_B should be set after setting PFC Function.
 	 */
-	gpio_request(GPIO_PORT176, NULL);
-	gpio_direction_output(GPIO_PORT176, 1);
+	gpio_request_one(GPIO_PORT176, GPIOF_OUT_INIT_HIGH, NULL);
 
 	/*
 	 * We can switch CON8/CON14 by SW1.5,
 	 * but it needs after DBGMD_SELECT_B
 	 */
-	gpio_request(GPIO_PORT6, NULL);
-	gpio_direction_input(GPIO_PORT6);
+	gpio_request_one(GPIO_PORT6, GPIOF_IN, NULL);
 	if (gpio_get_value(GPIO_PORT6)) {
 		/* CON14 enable */
 	} else {
@@ -1163,8 +1149,8 @@ static void __init eva_init(void)
 		gpio_request(GPIO_FN_SDHI1_CD,	NULL);
 		gpio_request(GPIO_FN_SDHI1_WP,	NULL);
 
-		gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */
-		gpio_direction_output(GPIO_PORT16, 1);
+		/* SDSLOT2_PON */
+		gpio_request_one(GPIO_PORT16, GPIOF_OUT_INIT_HIGH, NULL);
 
 		platform_device_register(&sdhi1_device);
 	}
-- 
1.7.10.4

[PATCH 4/9] ARM: shmobile: armadillo800eva: Use gpio_set_value() to set GPIO value

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The GPIO is already configured as an output, there's no reason to use
gpio_direction_output() just to set the output value. Use
gpio_set_value() instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index efd6a36..f107e82 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -708,9 +708,9 @@ static int mt9t111_power(struct device *dev, int mode)
 		/* video1 (= CON1 camera) expect 24MHz */
 		clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
 		clk_enable(mclk);
-		gpio_direction_output(GPIO_PORT158, 1);
+		gpio_set_value(GPIO_PORT158, 1);
 	} else {
-		gpio_direction_output(GPIO_PORT158, 0);
+		gpio_set_value(GPIO_PORT158, 0);
 		clk_disable(mclk);
 	}
 
-- 
1.7.10.4

[PATCH 4/9] ARM: shmobile: armadillo800eva: Use gpio_set_value() to set GPIO value

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The GPIO is already configured as an output, there's no reason to use
gpio_direction_output() just to set the output value. Use
gpio_set_value() instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index efd6a36..f107e82 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -708,9 +708,9 @@ static int mt9t111_power(struct device *dev, int mode)
 		/* video1 (= CON1 camera) expect 24MHz */
 		clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
 		clk_enable(mclk);
-		gpio_direction_output(GPIO_PORT158, 1);
+		gpio_set_value(GPIO_PORT158, 1);
 	} else {
-		gpio_direction_output(GPIO_PORT158, 0);
+		gpio_set_value(GPIO_PORT158, 0);
 		clk_disable(mclk);
 	}
 
-- 
1.7.10.4

[PATCH 5/9] ARM: shmobile: kota2: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kota2.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index bf88f9a..7ec3112 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -474,10 +474,8 @@ static void __init kota2_init(void)
 	gpio_request(GPIO_FN_D15_NAF15, NULL);
 	gpio_request(GPIO_FN_CS5A_, NULL);
 	gpio_request(GPIO_FN_WE0__FWE, NULL);
-	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
-	gpio_direction_input(GPIO_PORT144);
-	gpio_request(GPIO_PORT145, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT145, 1);
+	gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
+	gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
 
 	/* KEYSC */
 	gpio_request(GPIO_FN_KEYIN0_PU, NULL);
@@ -509,8 +507,7 @@ static void __init kota2_init(void)
 	gpio_request(GPIO_FN_MMCD0_6, NULL);
 	gpio_request(GPIO_FN_MMCD0_7, NULL);
 	gpio_request(GPIO_FN_MMCCMD0, NULL);
-	gpio_request(GPIO_PORT208, NULL); /* Reset */
-	gpio_direction_output(GPIO_PORT208, 1);
+	gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
 
 	/* SDHI0 (microSD) */
 	gpio_request(GPIO_FN_SDHICD0_PU, NULL);
-- 
1.7.10.4

[PATCH 5/9] ARM: shmobile: kota2: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kota2.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index bf88f9a..7ec3112 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -474,10 +474,8 @@ static void __init kota2_init(void)
 	gpio_request(GPIO_FN_D15_NAF15, NULL);
 	gpio_request(GPIO_FN_CS5A_, NULL);
 	gpio_request(GPIO_FN_WE0__FWE, NULL);
-	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
-	gpio_direction_input(GPIO_PORT144);
-	gpio_request(GPIO_PORT145, NULL); /* RESET */
-	gpio_direction_output(GPIO_PORT145, 1);
+	gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
+	gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
 
 	/* KEYSC */
 	gpio_request(GPIO_FN_KEYIN0_PU, NULL);
@@ -509,8 +507,7 @@ static void __init kota2_init(void)
 	gpio_request(GPIO_FN_MMCD0_6, NULL);
 	gpio_request(GPIO_FN_MMCD0_7, NULL);
 	gpio_request(GPIO_FN_MMCCMD0, NULL);
-	gpio_request(GPIO_PORT208, NULL); /* Reset */
-	gpio_direction_output(GPIO_PORT208, 1);
+	gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
 
 	/* SDHI0 (microSD) */
 	gpio_request(GPIO_FN_SDHICD0_PU, NULL);
-- 
1.7.10.4

[PATCH 6/9] ARM: shmobile: bonito: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-bonito.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index cb8c994..932a9c0 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -392,8 +392,7 @@ static void __init bonito_init(void)
 	/*
 	 * base board settings
 	 */
-	gpio_request(GPIO_PORT176, NULL);
-	gpio_direction_input(GPIO_PORT176);
+	gpio_request_one(GPIO_PORT176, GPIOF_IN, NULL);
 	if (!gpio_get_value(GPIO_PORT176)) {
 		u16 bsw2;
 		u16 bsw3;
@@ -462,8 +461,8 @@ static void __init bonito_init(void)
 			gpio_request(GPIO_FN_LCD0_DISP,		NULL);
 			gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
 
-			gpio_request(GPIO_PORT61, NULL); /* LCDDON */
-			gpio_direction_output(GPIO_PORT61, 1);
+			gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH,
+					 NULL); /* LCDDON */
 
 			/* backlight on */
 			bonito_fpga_write(LCDCR, 1);
-- 
1.7.10.4

[PATCH 6/9] ARM: shmobile: bonito: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-bonito.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index cb8c994..932a9c0 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -392,8 +392,7 @@ static void __init bonito_init(void)
 	/*
 	 * base board settings
 	 */
-	gpio_request(GPIO_PORT176, NULL);
-	gpio_direction_input(GPIO_PORT176);
+	gpio_request_one(GPIO_PORT176, GPIOF_IN, NULL);
 	if (!gpio_get_value(GPIO_PORT176)) {
 		u16 bsw2;
 		u16 bsw3;
@@ -462,8 +461,8 @@ static void __init bonito_init(void)
 			gpio_request(GPIO_FN_LCD0_DISP,		NULL);
 			gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
 
-			gpio_request(GPIO_PORT61, NULL); /* LCDDON */
-			gpio_direction_output(GPIO_PORT61, 1);
+			gpio_request_one(GPIO_PORT61, GPIOF_OUT_INIT_HIGH,
+					 NULL); /* LCDDON */
 
 			/* backlight on */
 			bonito_fpga_write(LCDCR, 1);
-- 
1.7.10.4

[PATCH 7/9] ARM: shmobile: kzm9g: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kzm9g.c |   18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index eadf309..2d08f57 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -672,8 +672,7 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
 
 	/* SMSC */
-	gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
-	gpio_direction_input(GPIO_PORT224);
+	gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */
 
 	/* LCDC */
 	gpio_request(GPIO_FN_LCDD23,	NULL);
@@ -703,14 +702,11 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_LCDDISP,	NULL);
 	gpio_request(GPIO_FN_LCDDCK,	NULL);
 
-	gpio_request(GPIO_PORT222,	NULL); /* LCDCDON */
-	gpio_request(GPIO_PORT226,	NULL); /* SC */
-	gpio_direction_output(GPIO_PORT222, 1);
-	gpio_direction_output(GPIO_PORT226, 1);
+	gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
+	gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
 
 	/* Touchscreen */
-	gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
-	gpio_direction_input(GPIO_PORT223);
+	gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */
 
 	/* enable MMCIF */
 	gpio_request(GPIO_FN_MMCCLK0,		NULL);
@@ -734,8 +730,7 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_SDHID0_1,		NULL);
 	gpio_request(GPIO_FN_SDHID0_0,		NULL);
 	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
-	gpio_request(GPIO_PORT15, NULL);
-	gpio_direction_output(GPIO_PORT15, 1); /* power */
+	gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
 
 	/* enable Micro SD */
 	gpio_request(GPIO_FN_SDHID2_0,		NULL);
@@ -744,8 +739,7 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_SDHID2_3,		NULL);
 	gpio_request(GPIO_FN_SDHICMD2,		NULL);
 	gpio_request(GPIO_FN_SDHICLK2,		NULL);
-	gpio_request(GPIO_PORT14, NULL);
-	gpio_direction_output(GPIO_PORT14, 1); /* power */
+	gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
 
 	/* I2C 3 */
 	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
-- 
1.7.10.4

[PATCH 7/9] ARM: shmobile: kzm9g: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kzm9g.c |   18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index eadf309..2d08f57 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -672,8 +672,7 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
 
 	/* SMSC */
-	gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
-	gpio_direction_input(GPIO_PORT224);
+	gpio_request_one(GPIO_PORT224, GPIOF_IN, NULL); /* IRQ3 */
 
 	/* LCDC */
 	gpio_request(GPIO_FN_LCDD23,	NULL);
@@ -703,14 +702,11 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_LCDDISP,	NULL);
 	gpio_request(GPIO_FN_LCDDCK,	NULL);
 
-	gpio_request(GPIO_PORT222,	NULL); /* LCDCDON */
-	gpio_request(GPIO_PORT226,	NULL); /* SC */
-	gpio_direction_output(GPIO_PORT222, 1);
-	gpio_direction_output(GPIO_PORT226, 1);
+	gpio_request_one(GPIO_PORT222, GPIOF_OUT_INIT_HIGH, NULL); /* LCDCDON */
+	gpio_request_one(GPIO_PORT226, GPIOF_OUT_INIT_HIGH, NULL); /* SC */
 
 	/* Touchscreen */
-	gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
-	gpio_direction_input(GPIO_PORT223);
+	gpio_request_one(GPIO_PORT223, GPIOF_IN, NULL); /* IRQ8 */
 
 	/* enable MMCIF */
 	gpio_request(GPIO_FN_MMCCLK0,		NULL);
@@ -734,8 +730,7 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_SDHID0_1,		NULL);
 	gpio_request(GPIO_FN_SDHID0_0,		NULL);
 	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
-	gpio_request(GPIO_PORT15, NULL);
-	gpio_direction_output(GPIO_PORT15, 1); /* power */
+	gpio_request_one(GPIO_PORT15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
 
 	/* enable Micro SD */
 	gpio_request(GPIO_FN_SDHID2_0,		NULL);
@@ -744,8 +739,7 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_SDHID2_3,		NULL);
 	gpio_request(GPIO_FN_SDHICMD2,		NULL);
 	gpio_request(GPIO_FN_SDHICLK2,		NULL);
-	gpio_request(GPIO_PORT14, NULL);
-	gpio_direction_output(GPIO_PORT14, 1); /* power */
+	gpio_request_one(GPIO_PORT14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
 
 	/* I2C 3 */
 	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
-- 
1.7.10.4

[PATCH 8/9] ARM: shmobile: mackerel: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c |   16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 002eaf6..8de350f 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1406,11 +1406,10 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_LCDDISP,  NULL);
 	gpio_request(GPIO_FN_LCDDCK,   NULL);
 
-	gpio_request(GPIO_PORT31, NULL); /* backlight */
-	gpio_direction_output(GPIO_PORT31, 0); /* off by default */
+	/* backlight, off by default */
+	gpio_request_one(GPIO_PORT31, GPIOF_OUT_INIT_LOW, NULL);
 
-	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT151, 1);
+	gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	/* USBHS0 */
 	gpio_request(GPIO_FN_VBUS0_0, NULL);
@@ -1426,8 +1425,7 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
 	gpio_request(GPIO_FN_FSIAISLD,	NULL);
 	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
-	gpio_request(GPIO_PORT161,	NULL);
-	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+	gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
 	gpio_request(GPIO_PORT9,  NULL);
 	gpio_request(GPIO_PORT10, NULL);
@@ -1481,8 +1479,7 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID1_0, NULL);
 #endif
 	/* card detect pin for MMC slot (CN7) */
-	gpio_request(GPIO_PORT41, NULL);
-	gpio_direction_input(GPIO_PORT41);
+	gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
 
 	/* enable SDHI2 */
 	gpio_request(GPIO_FN_SDHICMD2, NULL);
@@ -1493,8 +1490,7 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID2_0, NULL);
 
 	/* card detect pin for microSD slot (CN23) */
-	gpio_request(GPIO_PORT162, NULL);
-	gpio_direction_input(GPIO_PORT162);
+	gpio_request_one(GPIO_PORT162, GPIOF_IN, NULL);
 
 	/* MMCIF */
 	gpio_request(GPIO_FN_MMCD0_0, NULL);
-- 
1.7.10.4

[PATCH 8/9] ARM: shmobile: mackerel: Use gpio_request_one()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace occurences of gpio_request() and gpio_direction_*() by calls to
gpio_request_one().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c |   16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 002eaf6..8de350f 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1406,11 +1406,10 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_LCDDISP,  NULL);
 	gpio_request(GPIO_FN_LCDDCK,   NULL);
 
-	gpio_request(GPIO_PORT31, NULL); /* backlight */
-	gpio_direction_output(GPIO_PORT31, 0); /* off by default */
+	/* backlight, off by default */
+	gpio_request_one(GPIO_PORT31, GPIOF_OUT_INIT_LOW, NULL);
 
-	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
-	gpio_direction_output(GPIO_PORT151, 1);
+	gpio_request_one(GPIO_PORT151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	/* USBHS0 */
 	gpio_request(GPIO_FN_VBUS0_0, NULL);
@@ -1426,8 +1425,7 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
 	gpio_request(GPIO_FN_FSIAISLD,	NULL);
 	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
-	gpio_request(GPIO_PORT161,	NULL);
-	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+	gpio_request_one(GPIO_PORT161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
 	gpio_request(GPIO_PORT9,  NULL);
 	gpio_request(GPIO_PORT10, NULL);
@@ -1481,8 +1479,7 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID1_0, NULL);
 #endif
 	/* card detect pin for MMC slot (CN7) */
-	gpio_request(GPIO_PORT41, NULL);
-	gpio_direction_input(GPIO_PORT41);
+	gpio_request_one(GPIO_PORT41, GPIOF_IN, NULL);
 
 	/* enable SDHI2 */
 	gpio_request(GPIO_FN_SDHICMD2, NULL);
@@ -1493,8 +1490,7 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID2_0, NULL);
 
 	/* card detect pin for microSD slot (CN23) */
-	gpio_request(GPIO_PORT162, NULL);
-	gpio_direction_input(GPIO_PORT162);
+	gpio_request_one(GPIO_PORT162, GPIOF_IN, NULL);
 
 	/* MMCIF */
 	gpio_request(GPIO_FN_MMCD0_0, NULL);
-- 
1.7.10.4

[PATCH 9/9] ARM: shmobile: armadillo800eva: set clock rates before timer init

[Simon Horman]

From: Hideki EIRAKU <hdk@igel.co.jp>

Previously clock rates were set after initialization of timer.
Therefore the timer used the default extal1 clock rate (25MHz)
instead of the correct rate for this board (24MHz).

Signed-off-by: Hideki EIRAKU <hdk@igel.co.jp>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index f107e82..9008ad1 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1169,8 +1169,6 @@ static void __init eva_init(void)
 	platform_add_devices(eva_devices,
 			     ARRAY_SIZE(eva_devices));
 
-	eva_clock_init();
-
 	rmobile_add_device_to_domain("A4LC", &lcdc0_device);
 	rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
 	if (usb)
@@ -1181,6 +1179,9 @@ static void __init eva_earlytimer_init(void)
 {
 	r8a7740_clock_init(MD_CK0 | MD_CK2);
 	shmobile_earlytimer_init();
+
+	/* the rate of extal1 clock must be set before late_time_init */
+	eva_clock_init();
 }
 
 static void __init eva_add_early_devices(void)
-- 
1.7.10.4

[PATCH 9/9] ARM: shmobile: armadillo800eva: set clock rates before timer init

[Simon Horman]

From: Hideki EIRAKU <hdk@igel.co.jp>

Previously clock rates were set after initialization of timer.
Therefore the timer used the default extal1 clock rate (25MHz)
instead of the correct rate for this board (24MHz).

Signed-off-by: Hideki EIRAKU <hdk@igel.co.jp>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index f107e82..9008ad1 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1169,8 +1169,6 @@ static void __init eva_init(void)
 	platform_add_devices(eva_devices,
 			     ARRAY_SIZE(eva_devices));
 
-	eva_clock_init();
-
 	rmobile_add_device_to_domain("A4LC", &lcdc0_device);
 	rmobile_add_device_to_domain("A4LC", &hdmi_lcdc_device);
 	if (usb)
@@ -1181,6 +1179,9 @@ static void __init eva_earlytimer_init(void)
 {
 	r8a7740_clock_init(MD_CK0 | MD_CK2);
 	shmobile_earlytimer_init();
+
+	/* the rate of extal1 clock must be set before late_time_init */
+	eva_clock_init();
 }
 
 static void __init eva_add_early_devices(void)
-- 
1.7.10.4

[GIT PULL] Renesas ARM-based SoC for v3.9 #2

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit ff8de98d50e551057978ea90d09255c528fde1ac:

  ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED() (2013-01-25 12:43:50 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v3.9

for you to fetch changes up to dc784e73b45dc055f9dcb174ea5753ea020516fc:

  ARM: mach-shmobile: sh73a0: allow unplugging of CPU0 (2013-01-30 13:07:59 +0900)

----------------------------------------------------------------
Second round of Renesas ARM-based SoC changes for v3.9

* Changes to allow unplugging of CPU0 by Ulrich Hecht.

* Changes to add reg and device_type properties to cpus
  device trees entries by Simon Horman.

----------------------------------------------------------------
Simon Horman (2):
      ARM: mach-shmobile: sh73a0:  Add reg and device_type properties to cpus
      ARM: mach-shmobile: emev2:  Add reg and device_type properties to cpus

Ulrich Hecht (2):
      ARM: mach-shmobile: add shmobile_cpu_disable_any()
      ARM: mach-shmobile: sh73a0: allow unplugging of CPU0

 arch/arm/boot/dts/emev2.dtsi                 |    7 +++++++
 arch/arm/boot/dts/sh73a0.dtsi                |    7 +++++++
 arch/arm/mach-shmobile/hotplug.c             |    6 ++++++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/smp-sh73a0.c          |    2 +-
 5 files changed, 22 insertions(+), 1 deletion(-)

[GIT PULL] Renesas ARM-based SoC for v3.9 #2

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit ff8de98d50e551057978ea90d09255c528fde1ac:

  ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED() (2013-01-25 12:43:50 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v3.9

for you to fetch changes up to dc784e73b45dc055f9dcb174ea5753ea020516fc:

  ARM: mach-shmobile: sh73a0: allow unplugging of CPU0 (2013-01-30 13:07:59 +0900)

----------------------------------------------------------------
Second round of Renesas ARM-based SoC changes for v3.9

* Changes to allow unplugging of CPU0 by Ulrich Hecht.

* Changes to add reg and device_type properties to cpus
  device trees entries by Simon Horman.

----------------------------------------------------------------
Simon Horman (2):
      ARM: mach-shmobile: sh73a0:  Add reg and device_type properties to cpus
      ARM: mach-shmobile: emev2:  Add reg and device_type properties to cpus

Ulrich Hecht (2):
      ARM: mach-shmobile: add shmobile_cpu_disable_any()
      ARM: mach-shmobile: sh73a0: allow unplugging of CPU0

 arch/arm/boot/dts/emev2.dtsi                 |    7 +++++++
 arch/arm/boot/dts/sh73a0.dtsi                |    7 +++++++
 arch/arm/mach-shmobile/hotplug.c             |    6 ++++++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 arch/arm/mach-shmobile/smp-sh73a0.c          |    2 +-
 5 files changed, 22 insertions(+), 1 deletion(-)

[PATCH 1/4] ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus

[Simon Horman]

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 721f486..8a59465 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -14,11 +14,18 @@
 	compatible = "renesas,sh73a0";
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <0>;
 		};
 		cpu@1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <1>;
 		};
 	};
 
-- 
1.7.10.4

[PATCH 1/4] ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus

[Simon Horman]

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 721f486..8a59465 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -14,11 +14,18 @@
 	compatible = "renesas,sh73a0";
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu at 0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <0>;
 		};
 		cpu at 1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <1>;
 		};
 	};
 
-- 
1.7.10.4

[PATCH 2/4] ARM: mach-shmobile: emev2: Add reg and device_type properties to cpus

[Simon Horman]

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index eb504a6..c8a8c08 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -15,11 +15,18 @@
 	interrupt-parent = <&gic>;
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <0>;
 		};
 		cpu@1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <1>;
 		};
 	};
 
-- 
1.7.10.4

[PATCH 2/4] ARM: mach-shmobile: emev2: Add reg and device_type properties to cpus

[Simon Horman]

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/emev2.dtsi |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index eb504a6..c8a8c08 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -15,11 +15,18 @@
 	interrupt-parent = <&gic>;
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu at 0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <0>;
 		};
 		cpu at 1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			reg = <1>;
 		};
 	};
 
-- 
1.7.10.4

[PATCH 3/4] ARM: mach-shmobile: add shmobile_cpu_disable_any()

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

Method to disable any core to be used on platforms where CPU0 does not
need special treatment.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/hotplug.c             |    6 ++++++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 2 files changed, 7 insertions(+)

diff --git a/arch/arm/mach-shmobile/hotplug.c b/arch/arm/mach-shmobile/hotplug.c
index b09a0bd..a1524e3 100644
--- a/arch/arm/mach-shmobile/hotplug.c
+++ b/arch/arm/mach-shmobile/hotplug.c
@@ -56,6 +56,12 @@ int shmobile_cpu_disable(unsigned int cpu)
 	return cpu = 0 ? -EPERM : 0;
 }
 
+int shmobile_cpu_disable_any(unsigned int cpu)
+{
+	cpumask_clear_cpu(cpu, &dead_cpus);
+	return 0;
+}
+
 int shmobile_cpu_is_dead(unsigned int cpu)
 {
 	return cpumask_test_cpu(cpu, &dead_cpus);
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 64c0622..e48606d 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -84,6 +84,7 @@ static inline int shmobile_cpuidle_init(void) { return 0; }
 
 extern void shmobile_cpu_die(unsigned int cpu);
 extern int shmobile_cpu_disable(unsigned int cpu);
+extern int shmobile_cpu_disable_any(unsigned int cpu);
 
 #ifdef CONFIG_HOTPLUG_CPU
 extern int shmobile_cpu_is_dead(unsigned int cpu);
-- 
1.7.10.4

[PATCH 3/4] ARM: mach-shmobile: add shmobile_cpu_disable_any()

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

Method to disable any core to be used on platforms where CPU0 does not
need special treatment.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/hotplug.c             |    6 ++++++
 arch/arm/mach-shmobile/include/mach/common.h |    1 +
 2 files changed, 7 insertions(+)

diff --git a/arch/arm/mach-shmobile/hotplug.c b/arch/arm/mach-shmobile/hotplug.c
index b09a0bd..a1524e3 100644
--- a/arch/arm/mach-shmobile/hotplug.c
+++ b/arch/arm/mach-shmobile/hotplug.c
@@ -56,6 +56,12 @@ int shmobile_cpu_disable(unsigned int cpu)
 	return cpu == 0 ? -EPERM : 0;
 }
 
+int shmobile_cpu_disable_any(unsigned int cpu)
+{
+	cpumask_clear_cpu(cpu, &dead_cpus);
+	return 0;
+}
+
 int shmobile_cpu_is_dead(unsigned int cpu)
 {
 	return cpumask_test_cpu(cpu, &dead_cpus);
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 64c0622..e48606d 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -84,6 +84,7 @@ static inline int shmobile_cpuidle_init(void) { return 0; }
 
 extern void shmobile_cpu_die(unsigned int cpu);
 extern int shmobile_cpu_disable(unsigned int cpu);
+extern int shmobile_cpu_disable_any(unsigned int cpu);
 
 #ifdef CONFIG_HOTPLUG_CPU
 extern int shmobile_cpu_is_dead(unsigned int cpu);
-- 
1.7.10.4

[PATCH 4/4] ARM: mach-shmobile: sh73a0: allow unplugging of CPU0

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

sh73a0 deals fine with disabling any core, so we should permit it.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-sh73a0.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 9812ea3..acb46a9 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -143,6 +143,6 @@ struct smp_operations sh73a0_smp_ops __initdata = {
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= sh73a0_cpu_kill,
 	.cpu_die		= sh73a0_cpu_die,
-	.cpu_disable		= shmobile_cpu_disable,
+	.cpu_disable		= shmobile_cpu_disable_any,
 #endif
 };
-- 
1.7.10.4

[PATCH 4/4] ARM: mach-shmobile: sh73a0: allow unplugging of CPU0

[Simon Horman]

From: Ulrich Hecht <ulrich.hecht@gmail.com>

sh73a0 deals fine with disabling any core, so we should permit it.

Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/smp-sh73a0.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 9812ea3..acb46a9 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -143,6 +143,6 @@ struct smp_operations sh73a0_smp_ops __initdata = {
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= sh73a0_cpu_kill,
 	.cpu_die		= sh73a0_cpu_die,
-	.cpu_disable		= shmobile_cpu_disable,
+	.cpu_disable		= shmobile_cpu_disable_any,
 #endif
 };
-- 
1.7.10.4

Re: [GIT PULL] Renesas ARM-based SoC for v3.9 #2

[Olof Johansson]

On Thu, Jan 31, 2013 at 03:23:53PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit 42dd581bc4dba82e8756bb881fa974742250b4c6:
> 
>   ARM: shmobile: Include sh73a0 DTSI in kzm9g (2013-01-25 09:26:33 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-boards2-for-v3.9


Pulled. And thanks for using a tag!

-Olof

[GIT PULL] Renesas ARM-based SoC for v3.9 #2

[Olof Johansson]

On Thu, Jan 31, 2013 at 03:23:53PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit 42dd581bc4dba82e8756bb881fa974742250b4c6:
> 
>   ARM: shmobile: Include sh73a0 DTSI in kzm9g (2013-01-25 09:26:33 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-boards2-for-v3.9


Pulled. And thanks for using a tag!

-Olof

Re: [GIT PULL] Renesas ARM-based SoC for v3.9 #2

[Olof Johansson]

On Thu, Jan 31, 2013 at 03:26:05PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit ff8de98d50e551057978ea90d09255c528fde1ac:
> 
>   ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED() (2013-01-25 12:43:50 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v3.9
> 


Pulled.

-Olof

[GIT PULL] Renesas ARM-based SoC for v3.9 #2

[Olof Johansson]

On Thu, Jan 31, 2013 at 03:26:05PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit ff8de98d50e551057978ea90d09255c528fde1ac:
> 
>   ARM: shmobile: r8a7779: scif .irqs used SCIx_IRQ_MUXED() (2013-01-25 12:43:50 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc2-for-v3.9
> 


Pulled.

-Olof

[GIT PULL] Renesas ARM-based SoC for v3.9 #3

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit dc784e73b45dc055f9dcb174ea5753ea020516fc:

  ARM: mach-shmobile: sh73a0: allow unplugging of CPU0 (2013-01-30 13:07:59 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc3-for-v3.9

for you to fetch changes up to 58079fa7d54a0929d304054ee759187a2ccd3cdf:

  ARM: shmobile: r8a7779: Correct TMU clock support (2013-02-05 12:31:18 +0900)

----------------------------------------------------------------
Third round of Renesas ARM-based SoC changes for v3.9

A fix for r8a7779 clocks.

----------------------------------------------------------------
Simon Horman (1):
      ARM: shmobile: r8a7779: Correct TMU clock support

 arch/arm/mach-shmobile/clock-r8a7779.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

[GIT PULL] Renesas ARM-based SoC for v3.9 #3

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit dc784e73b45dc055f9dcb174ea5753ea020516fc:

  ARM: mach-shmobile: sh73a0: allow unplugging of CPU0 (2013-01-30 13:07:59 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc3-for-v3.9

for you to fetch changes up to 58079fa7d54a0929d304054ee759187a2ccd3cdf:

  ARM: shmobile: r8a7779: Correct TMU clock support (2013-02-05 12:31:18 +0900)

----------------------------------------------------------------
Third round of Renesas ARM-based SoC changes for v3.9

A fix for r8a7779 clocks.

----------------------------------------------------------------
Simon Horman (1):
      ARM: shmobile: r8a7779: Correct TMU clock support

 arch/arm/mach-shmobile/clock-r8a7779.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

[PATCH] ARM: shmobile: r8a7779: Correct TMU clock support

[Simon Horman]

During code review it was noticed that the clock value for
TMU01 was incorrect and the value for TMU02 was missing.

For reference: As of 3.8-rc6 there are no in-tree consumes of these clocks.

Reported-by: Denis Oliver Kropp <dok@directfb.org>
Reviewed-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index c019609..202370d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -161,7 +161,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
+	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
+	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP014]), /* TMU02 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-- 
1.7.10.4

[PATCH] ARM: shmobile: r8a7779: Correct TMU clock support

[Simon Horman]

During code review it was noticed that the clock value for
TMU01 was incorrect and the value for TMU02 was missing.

For reference: As of 3.8-rc6 there are no in-tree consumes of these clocks.

Reported-by: Denis Oliver Kropp <dok@directfb.org>
Reviewed-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index c019609..202370d 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -161,7 +161,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
+	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
+	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP014]), /* TMU02 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-- 
1.7.10.4

Re: [GIT PULL] Renesas ARM-based SoC for v3.9 #3

[Olof Johansson]

On Tue, Feb 05, 2013 at 12:47:41PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit dc784e73b45dc055f9dcb174ea5753ea020516fc:
> 
>   ARM: mach-shmobile: sh73a0: allow unplugging of CPU0 (2013-01-30 13:07:59 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc3-for-v3.9
> 
> for you to fetch changes up to 58079fa7d54a0929d304054ee759187a2ccd3cdf:
> 
>   ARM: shmobile: r8a7779: Correct TMU clock support (2013-02-05 12:31:18 +0900)


pulled.

-Olof

[GIT PULL] Renesas ARM-based SoC for v3.9 #3

[Olof Johansson]

On Tue, Feb 05, 2013 at 12:47:41PM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit dc784e73b45dc055f9dcb174ea5753ea020516fc:
> 
>   ARM: mach-shmobile: sh73a0: allow unplugging of CPU0 (2013-01-30 13:07:59 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc3-for-v3.9
> 
> for you to fetch changes up to 58079fa7d54a0929d304054ee759187a2ccd3cdf:
> 
>   ARM: shmobile: r8a7779: Correct TMU clock support (2013-02-05 12:31:18 +0900)


pulled.

-Olof

[GIT PULL] Renesas ARM-based SoC for v3.9 #4

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit 58079fa7d54a0929d304054ee759187a2ccd3cdf:

  ARM: shmobile: r8a7779: Correct TMU clock support (2013-02-05 12:31:18 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc4-for-v3.9

for you to fetch changes up to dbe1c3defb3844772634446492ea6c13882596ec:

  ARM: shmobile: Register ARM architected timer (2013-02-05 17:13:55 +0900)

----------------------------------------------------------------
Fourth round of Renesas ARM-based SoC changes for v3.9

Register ARM architected timer.

This is preparatory work by Magnus Damm for SoC(s) that use
the ARM architected timer.

----------------------------------------------------------------
Magnus Damm (1):
      ARM: shmobile: Register ARM architected timer

 arch/arm/mach-shmobile/timer.c |    3 +++
 1 file changed, 3 insertions(+)

[GIT PULL] Renesas ARM-based SoC for v3.9 #4

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit 58079fa7d54a0929d304054ee759187a2ccd3cdf:

  ARM: shmobile: r8a7779: Correct TMU clock support (2013-02-05 12:31:18 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc4-for-v3.9

for you to fetch changes up to dbe1c3defb3844772634446492ea6c13882596ec:

  ARM: shmobile: Register ARM architected timer (2013-02-05 17:13:55 +0900)

----------------------------------------------------------------
Fourth round of Renesas ARM-based SoC changes for v3.9

Register ARM architected timer.

This is preparatory work by Magnus Damm for SoC(s) that use
the ARM architected timer.

----------------------------------------------------------------
Magnus Damm (1):
      ARM: shmobile: Register ARM architected timer

 arch/arm/mach-shmobile/timer.c |    3 +++
 1 file changed, 3 insertions(+)

[PATCH] ARM: shmobile: Register ARM architected timer

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Register ARM architected timer by default for all mach-shmobile
systems using late timer.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/timer.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index fdbe54a..3d16d4d 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -20,6 +20,7 @@
  */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <asm/arch_timer.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
 
@@ -62,4 +63,6 @@ void __init shmobile_earlytimer_init(void)
 
 void __init shmobile_timer_init(void)
 {
+	arch_timer_of_register();
+	arch_timer_sched_clock_init();
 }
-- 
1.7.10.4

[PATCH] ARM: shmobile: Register ARM architected timer

[Simon Horman]

From: Magnus Damm <damm@opensource.se>

Register ARM architected timer by default for all mach-shmobile
systems using late timer.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/timer.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index fdbe54a..3d16d4d 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -20,6 +20,7 @@
  */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <asm/arch_timer.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
 
@@ -62,4 +63,6 @@ void __init shmobile_earlytimer_init(void)
 
 void __init shmobile_timer_init(void)
 {
+	arch_timer_of_register();
+	arch_timer_sched_clock_init();
 }
-- 
1.7.10.4

Re: [GIT PULL] Renesas ARM-based SoC for v3.9 #4

[Olof Johansson]

On Wed, Feb 06, 2013 at 11:03:20AM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit 58079fa7d54a0929d304054ee759187a2ccd3cdf:
> 
>   ARM: shmobile: r8a7779: Correct TMU clock support (2013-02-05 12:31:18 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc4-for-v3.9
> 
> for you to fetch changes up to dbe1c3defb3844772634446492ea6c13882596ec:
> 
>   ARM: shmobile: Register ARM architected timer (2013-02-05 17:13:55 +0900)


Pulled, thanks.


-Olof

[GIT PULL] Renesas ARM-based SoC for v3.9 #4

[Olof Johansson]

On Wed, Feb 06, 2013 at 11:03:20AM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> The following changes since commit 58079fa7d54a0929d304054ee759187a2ccd3cdf:
> 
>   ARM: shmobile: r8a7779: Correct TMU clock support (2013-02-05 12:31:18 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc4-for-v3.9
> 
> for you to fetch changes up to dbe1c3defb3844772634446492ea6c13882596ec:
> 
>   ARM: shmobile: Register ARM architected timer (2013-02-05 17:13:55 +0900)


Pulled, thanks.


-Olof

[GIT PULL] Renesas ARM-based SoC for v3.9 #5

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit dbe1c3defb3844772634446492ea6c13882596ec:

  ARM: shmobile: Register ARM architected timer (2013-02-05 17:13:55 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc5-for-v3.9

for you to fetch changes up to f9047306fd7332d682898dd689152bb3b45a3e73:

  ARM: shmobile: r8a7779: Correct TMU clock support again (2013-02-19 10:05:27 +0900)

----------------------------------------------------------------
This resolves a panic-on-boot regression introduced by me when incorrectly
updating TMU clock definitions.

----------------------------------------------------------------
Simon Horman (1):
      ARM: shmobile: r8a7779: Correct TMU clock support again

 arch/arm/mach-shmobile/clock-r8a7779.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

[GIT PULL] Renesas ARM-based SoC for v3.9 #5

[Simon Horman]

Hi Olof, Hi Arnd,

The following changes since commit dbe1c3defb3844772634446492ea6c13882596ec:

  ARM: shmobile: Register ARM architected timer (2013-02-05 17:13:55 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc5-for-v3.9

for you to fetch changes up to f9047306fd7332d682898dd689152bb3b45a3e73:

  ARM: shmobile: r8a7779: Correct TMU clock support again (2013-02-19 10:05:27 +0900)

----------------------------------------------------------------
This resolves a panic-on-boot regression introduced by me when incorrectly
updating TMU clock definitions.

----------------------------------------------------------------
Simon Horman (1):
      ARM: shmobile: r8a7779: Correct TMU clock support again

 arch/arm/mach-shmobile/clock-r8a7779.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

[PATCH] ARM: shmobile: r8a7779: Correct TMU clock support again

[Simon Horman]

After discussion on the linux-sh mailing list and reference to the
hardware documentation it appears that 'TMU00', 'TMU01' and 'TMU02'
use a common clock.

The sh_tmu.1 portion of this change resolves a regression introduced in
58079fa7d54a0929d304054ee759187a2ccd3cdf (ARM: shmobile: r8a7779: Correct
TMU clock support) and fixes a regression introduced by that patch. That
patch is queued up for v3.9.

...
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
INFO: rcu_sched self-detected stall on CPUINFO: rcu_sched detected stalls on
+CPUs/tasks: { 1} (detected by 2, t'9640 jiffies, gB94967052, cB94967051,
+q8)
Task dump for CPU 1:
swapper/0       R running      0     1      0 0x00000002
[<c02b8f5c>] (__schedule+0x1b0/0x4c0) from [<c013c590>] (__loop_delay+0x4/0xc)

 { 1}  (t'9640 jiffies gB94967052 cB94967052 q7)
[<c000ef9c>] (unwind_backtrace+0x0/0xf8) from [<c0068488>]
+(rcu_check_callbacks+0x218/0x6b8)
[<c0068488>] (rcu_check_callbacks+0x218/0x6b8) from [<c0026774>]
+(update_process_times+0x38/0x4c)
[<c0026774>] (update_process_times+0x38/0x4c) from [<c00569e0>]
+(tick_nohz_handler+0xb4/0x11c)
[<c00569e0>] (tick_nohz_handler+0xb4/0x11c) from [<c000e518>]
+(twd_handler+0x34/0x44)
[<c000e518>] (twd_handler+0x34/0x44) from [<c0063484>]
+(handle_percpu_devid_irq+0x68/0x80)
[<c0063484>] (handle_percpu_devid_irq+0x68/0x80) from [<c005febc>]
+(generic_handle_irq+0x20/0x30)
[<c005febc>] (generic_handle_irq+0x20/0x30) from [<c000a5ec>]
+(handle_IRQ+0x40/0x90)
[<c000a5ec>] (handle_IRQ+0x40/0x90) from [<c000934c>] (gic_handle_irq+0x2c/0x5c)
[<c000934c>] (gic_handle_irq+0x2c/0x5c) from [<c0009a40>] (__irq_svc+0x40/0x50)
Exception stack(0xef03ddf8 to 0xef03de40)
dde0:                                                       000001c1 ffffffff
de00: 000001d8 01bf01bf ef35ec40 ef35e800 ef35ec6c 0000002b ef35ec68 c013c560
de20: c0392994 60000113 00000000 ef03de40 c01a5d40 c013c590 20000113 ffffffff
[<c0009a40>] (__irq_svc+0x40/0x50) from [<c013c590>] (__loop_delay+0x4/0xc)

Cc: Denis Oliver Kropp <dok@directfb.org>
Cc: Magnus Damm <damm@opensource.se>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 202370d..1db3653 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -161,8 +161,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
-	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP014]), /* TMU02 */
+	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
+	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-- 
1.7.10.4

[PATCH] ARM: shmobile: r8a7779: Correct TMU clock support again

[Simon Horman]

After discussion on the linux-sh mailing list and reference to the
hardware documentation it appears that 'TMU00', 'TMU01' and 'TMU02'
use a common clock.

The sh_tmu.1 portion of this change resolves a regression introduced in
58079fa7d54a0929d304054ee759187a2ccd3cdf (ARM: shmobile: r8a7779: Correct
TMU clock support) and fixes a regression introduced by that patch. That
patch is queued up for v3.9.

...
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
INFO: rcu_sched self-detected stall on CPUINFO: rcu_sched detected stalls on
+CPUs/tasks: { 1} (detected by 2, t=279640 jiffies, g=4294967052, c=4294967051,
+q=38)
Task dump for CPU 1:
swapper/0       R running      0     1      0 0x00000002
[<c02b8f5c>] (__schedule+0x1b0/0x4c0) from [<c013c590>] (__loop_delay+0x4/0xc)

 { 1}  (t=279640 jiffies g=4294967052 c=4294967052 q=37)
[<c000ef9c>] (unwind_backtrace+0x0/0xf8) from [<c0068488>]
+(rcu_check_callbacks+0x218/0x6b8)
[<c0068488>] (rcu_check_callbacks+0x218/0x6b8) from [<c0026774>]
+(update_process_times+0x38/0x4c)
[<c0026774>] (update_process_times+0x38/0x4c) from [<c00569e0>]
+(tick_nohz_handler+0xb4/0x11c)
[<c00569e0>] (tick_nohz_handler+0xb4/0x11c) from [<c000e518>]
+(twd_handler+0x34/0x44)
[<c000e518>] (twd_handler+0x34/0x44) from [<c0063484>]
+(handle_percpu_devid_irq+0x68/0x80)
[<c0063484>] (handle_percpu_devid_irq+0x68/0x80) from [<c005febc>]
+(generic_handle_irq+0x20/0x30)
[<c005febc>] (generic_handle_irq+0x20/0x30) from [<c000a5ec>]
+(handle_IRQ+0x40/0x90)
[<c000a5ec>] (handle_IRQ+0x40/0x90) from [<c000934c>] (gic_handle_irq+0x2c/0x5c)
[<c000934c>] (gic_handle_irq+0x2c/0x5c) from [<c0009a40>] (__irq_svc+0x40/0x50)
Exception stack(0xef03ddf8 to 0xef03de40)
dde0:                                                       000001c1 ffffffff
de00: 000001d8 01bf01bf ef35ec40 ef35e800 ef35ec6c 0000002b ef35ec68 c013c560
de20: c0392994 60000113 00000000 ef03de40 c01a5d40 c013c590 20000113 ffffffff
[<c0009a40>] (__irq_svc+0x40/0x50) from [<c013c590>] (__loop_delay+0x4/0xc)

Cc: Denis Oliver Kropp <dok@directfb.org>
Cc: Magnus Damm <damm@opensource.se>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 202370d..1db3653 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -161,8 +161,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
-	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
-	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP014]), /* TMU02 */
+	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
+	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-- 
1.7.10.4

Re: [GIT PULL] Renesas ARM-based SoC for v3.9 #5

[Arnd Bergmann]

On Tuesday 19 February 2013, Simon Horman wrote:
> The following changes since commit dbe1c3defb3844772634446492ea6c13882596ec:
> 
>   ARM: shmobile: Register ARM architected timer (2013-02-05 17:13:55 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc5-for-v3.9
> 
> for you to fetch changes up to f9047306fd7332d682898dd689152bb3b45a3e73:
> 
>   ARM: shmobile: r8a7779: Correct TMU clock support again (2013-02-19 10:05:27 +0900)
> 

Pulled into next/soc, thanks!

	Arnd

[GIT PULL] Renesas ARM-based SoC for v3.9 #5

[Arnd Bergmann]

On Tuesday 19 February 2013, Simon Horman wrote:
> The following changes since commit dbe1c3defb3844772634446492ea6c13882596ec:
> 
>   ARM: shmobile: Register ARM architected timer (2013-02-05 17:13:55 +0900)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-soc5-for-v3.9
> 
> for you to fetch changes up to f9047306fd7332d682898dd689152bb3b45a3e73:
> 
>   ARM: shmobile: r8a7779: Correct TMU clock support again (2013-02-19 10:05:27 +0900)
> 

Pulled into next/soc, thanks!

	Arnd

[PATCH 4/4] ARM: shmobile: r8a7779: add I2C clock for DT

[Kuninori Morimoto]

10e8d4f6dddb0f9dc408c2f2bde8399b243a42ca
(ARM: mach-shmobile: r8a7779: Minimal setup using DT)
added I2C driver for DT, but it didn't add clock.
This patch adds missing clock for I2C

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 1f7080f..badb8b7 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -184,9 +184,13 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
 	CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
+	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
 	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
+	CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
 	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
+	CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
 	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
+	CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-- 
1.7.9.5

Re: [PATCH 4/4] ARM: shmobile: r8a7779: add I2C clock for DT

[Simon Horman]

On Thu, Oct 03, 2013 at 11:45:03PM -0700, Kuninori Morimoto wrote:
> 10e8d4f6dddb0f9dc408c2f2bde8399b243a42ca
> (ARM: mach-shmobile: r8a7779: Minimal setup using DT)
> added I2C driver for DT, but it didn't add clock.
> This patch adds missing clock for I2C
> 
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Thanks, I have queued this up but I am unsure if it will
end up in v3.13 or v3.14.

Re: [PATCH] ARM: shmobile: Register ARM architected timer

[Simon Horman]

On Tue, Feb 05, 2013 at 04:30:49PM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
> 
> Register ARM architected timer by default for all mach-shmobile
> systems using late timer.

Thanks, applied to a new soc4 branch and merged into next.

[PATCH] ARM: shmobile: Register ARM architected timer

[Simon Horman]

On Tue, Feb 05, 2013 at 04:30:49PM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
> 
> Register ARM architected timer by default for all mach-shmobile
> systems using late timer.

Thanks, applied to a new soc4 branch and merged into next.

[PATCH] ARM: shmobile: Register ARM architected timer

[Magnus Damm]

From: Magnus Damm <damm@opensource.se>

Register ARM architected timer by default for all mach-shmobile
systems using late timer.

Signed-off-by: Magnus Damm <damm@opensource.se>
---

 arch/arm/mach-shmobile/timer.c |    3 +++
 1 file changed, 3 insertions(+)

--- 0001/arch/arm/mach-shmobile/timer.c
+++ work/arch/arm/mach-shmobile/timer.c	2013-02-05 16:17:04.000000000 +0900
@@ -20,6 +20,7 @@
  */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <asm/arch_timer.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
 
@@ -62,4 +63,6 @@ void __init shmobile_earlytimer_init(voi
 
 void __init shmobile_timer_init(void)
 {
+	arch_timer_of_register();
+	arch_timer_sched_clock_init();
 }

[PATCH] ARM: shmobile: Register ARM architected timer

[Magnus Damm]

From: Magnus Damm <damm@opensource.se>

Register ARM architected timer by default for all mach-shmobile
systems using late timer.

Signed-off-by: Magnus Damm <damm@opensource.se>
---

 arch/arm/mach-shmobile/timer.c |    3 +++
 1 file changed, 3 insertions(+)

--- 0001/arch/arm/mach-shmobile/timer.c
+++ work/arch/arm/mach-shmobile/timer.c	2013-02-05 16:17:04.000000000 +0900
@@ -20,6 +20,7 @@
  */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <asm/arch_timer.h>
 #include <asm/mach/time.h>
 #include <asm/smp_twd.h>
 
@@ -62,4 +63,6 @@ void __init shmobile_earlytimer_init(voi
 
 void __init shmobile_timer_init(void)
 {
+	arch_timer_of_register();
+	arch_timer_sched_clock_init();
 }