[PATCH 0/5] ARM: OMAP: arm part of usb patches

[PATCH 0/5] ARM: OMAP: arm part of usb patches

[Kishon Vijay Abraham I]

Hi Greg,

Here is the patch series that includes the arch/arm part to get MUSB
working in OMAP platforms. As discussed in the other mail thread with
Tony, this patch series should go into usb-next.

This patch series also contains a patch by Felipe to fix compilation
warning in usb-next when CONFIG_OMAP_CONTROL_USB is not set.

Boot tested panda board.

Felipe Balbi (1):
  usb: omap_control_usb: fix compile warning

Kishon Vijay Abraham I (4):
  ARM: OMAP4: remove control module address space from PHY and OTG
  ARM: OMAP: devices: create device for usb part of control module
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: USB: Add phy binding information

 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 arch/arm/mach-omap2/devices.c                |   45 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |   13 --------
 arch/arm/mach-omap2/usb-musb.c               |    3 ++
 include/linux/usb/musb.h                     |    2 ++
 include/linux/usb/omap_control_usb.h         |    2 +-
 22 files changed, 85 insertions(+), 14 deletions(-)

-- 
1.7.10.4

[PATCH 0/5] ARM: OMAP: arm part of usb patches

[Kishon Vijay Abraham I]

Hi Greg,

Here is the patch series that includes the arch/arm part to get MUSB
working in OMAP platforms. As discussed in the other mail thread with
Tony, this patch series should go into usb-next.

This patch series also contains a patch by Felipe to fix compilation
warning in usb-next when CONFIG_OMAP_CONTROL_USB is not set.

Boot tested panda board.

Felipe Balbi (1):
  usb: omap_control_usb: fix compile warning

Kishon Vijay Abraham I (4):
  ARM: OMAP4: remove control module address space from PHY and OTG
  ARM: OMAP: devices: create device for usb part of control module
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: USB: Add phy binding information

 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 arch/arm/mach-omap2/devices.c                |   45 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |   13 --------
 arch/arm/mach-omap2/usb-musb.c               |    3 ++
 include/linux/usb/musb.h                     |    2 ++
 include/linux/usb/omap_control_usb.h         |    2 +-
 22 files changed, 85 insertions(+), 14 deletions(-)

-- 
1.7.10.4

[PATCH 0/5] ARM: OMAP: arm part of usb patches

[Kishon Vijay Abraham I]

Hi Greg,

Here is the patch series that includes the arch/arm part to get MUSB
working in OMAP platforms. As discussed in the other mail thread with
Tony, this patch series should go into usb-next.

This patch series also contains a patch by Felipe to fix compilation
warning in usb-next when CONFIG_OMAP_CONTROL_USB is not set.

Boot tested panda board.

Felipe Balbi (1):
  usb: omap_control_usb: fix compile warning

Kishon Vijay Abraham I (4):
  ARM: OMAP4: remove control module address space from PHY and OTG
  ARM: OMAP: devices: create device for usb part of control module
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: USB: Add phy binding information

 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 arch/arm/mach-omap2/devices.c                |   45 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |   13 --------
 arch/arm/mach-omap2/usb-musb.c               |    3 ++
 include/linux/usb/musb.h                     |    2 ++
 include/linux/usb/omap_control_usb.h         |    2 +-
 22 files changed, 85 insertions(+), 14 deletions(-)

-- 
1.7.10.4

[PATCH 1/5] ARM: OMAP4: remove control module address space from PHY and OTG

[Kishon Vijay Abraham I]

Now that we have a separate driver for the control module,
stop populating the control module device data in other modules
(PHY and OTG) device info.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |   13 -------------
 1 file changed, 13 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 793f54a..624a7e8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2702,13 +2702,6 @@ static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
 		.end		= 0x4a0ae000,
 		.flags		= IORESOURCE_MEM,
 	},
-	{
-		/* XXX: Remove this once control module driver is in place */
-		.name		= "ctrl_dev",
-		.start		= 0x4a002300,
-		.end		= 0x4a002303,
-		.flags		= IORESOURCE_MEM,
-	},
 	{ }
 };
 
@@ -6156,12 +6149,6 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
 		.pa_end		= 0x4a0ab7ff,
 		.flags		= ADDR_TYPE_RT
 	},
-	{
-		/* XXX: Remove this once control module driver is in place */
-		.pa_start	= 0x4a00233c,
-		.pa_end		= 0x4a00233f,
-		.flags		= ADDR_TYPE_RT
-	},
 	{ }
 };
 
-- 
1.7.10.4

[PATCH 1/5] ARM: OMAP4: remove control module address space from PHY and OTG

[Kishon Vijay Abraham I]

Now that we have a separate driver for the control module,
stop populating the control module device data in other modules
(PHY and OTG) device info.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |   13 -------------
 1 file changed, 13 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 793f54a..624a7e8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2702,13 +2702,6 @@ static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
 		.end		= 0x4a0ae000,
 		.flags		= IORESOURCE_MEM,
 	},
-	{
-		/* XXX: Remove this once control module driver is in place */
-		.name		= "ctrl_dev",
-		.start		= 0x4a002300,
-		.end		= 0x4a002303,
-		.flags		= IORESOURCE_MEM,
-	},
 	{ }
 };
 
@@ -6156,12 +6149,6 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
 		.pa_end		= 0x4a0ab7ff,
 		.flags		= ADDR_TYPE_RT
 	},
-	{
-		/* XXX: Remove this once control module driver is in place */
-		.pa_start	= 0x4a00233c,
-		.pa_end		= 0x4a00233f,
-		.flags		= ADDR_TYPE_RT
-	},
 	{ }
 };
 
-- 
1.7.10.4

[PATCH 1/5] ARM: OMAP4: remove control module address space from PHY and OTG

[Kishon Vijay Abraham I]

Now that we have a separate driver for the control module,
stop populating the control module device data in other modules
(PHY and OTG) device info.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |   13 -------------
 1 file changed, 13 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 793f54a..624a7e8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2702,13 +2702,6 @@ static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
 		.end		= 0x4a0ae000,
 		.flags		= IORESOURCE_MEM,
 	},
-	{
-		/* XXX: Remove this once control module driver is in place */
-		.name		= "ctrl_dev",
-		.start		= 0x4a002300,
-		.end		= 0x4a002303,
-		.flags		= IORESOURCE_MEM,
-	},
 	{ }
 };
 
@@ -6156,12 +6149,6 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
 		.pa_end		= 0x4a0ab7ff,
 		.flags		= ADDR_TYPE_RT
 	},
-	{
-		/* XXX: Remove this once control module driver is in place */
-		.pa_start	= 0x4a00233c,
-		.pa_end		= 0x4a00233f,
-		.flags		= ADDR_TYPE_RT
-	},
 	{ }
 };
 
-- 
1.7.10.4

[PATCH 2/5] ARM: OMAP: devices: create device for usb part of control module

[Kishon Vijay Abraham I]

A seperate driver has been added to handle the usb part of control
module. A device for the above driver is created here, using the register
address information to be used by the driver for powering on the PHY and
for writing to the mailbox.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c |   45 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 626f3ea..6cda103 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -20,6 +20,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/platform_data/omap_ocp2scp.h>
+#include <linux/usb/omap_control_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -254,6 +255,49 @@ static inline void omap_init_camera(void)
 #endif
 }
 
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
+static struct omap_control_usb_platform_data omap4_control_usb_pdata = {
+	.type = 1,
+};
+
+struct resource omap4_control_usb_res[] = {
+	{
+		.name	= "control_dev_conf",
+		.start	= 0x4a002300,
+		.end	= 0x4a002303,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "otghs_control",
+		.start	= 0x4a00233c,
+		.end	= 0x4a00233f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap4_control_usb = {
+	.name		= "omap-control-usb",
+	.id		= -1,
+	.dev = {
+		.platform_data = &omap4_control_usb_pdata,
+	},
+	.num_resources = 2,
+	.resource = omap4_control_usb_res,
+};
+
+static inline void __init omap_init_control_usb(void)
+{
+	if (!cpu_is_omap44xx())
+		return;
+
+	if (platform_device_register(&omap4_control_usb))
+		pr_err("Error registering omap_control_usb device\n");
+}
+
+#else
+static inline void omap_init_control_usb(void) { }
+#endif /* CONFIG_OMAP_CONTROL_USB */
+
 int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			*sdp4430_keypad_data, struct omap_board_data *bdata)
 {
@@ -721,6 +765,7 @@ static int __init omap2_init_devices(void)
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
+		omap_init_control_usb();
 		omap_init_dmic();
 		omap_init_mcpdm();
 		omap_init_mcspi();
-- 
1.7.10.4

[PATCH 2/5] ARM: OMAP: devices: create device for usb part of control module

[Kishon Vijay Abraham I]

A seperate driver has been added to handle the usb part of control
module. A device for the above driver is created here, using the register
address information to be used by the driver for powering on the PHY and
for writing to the mailbox.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c |   45 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 626f3ea..6cda103 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -20,6 +20,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/platform_data/omap_ocp2scp.h>
+#include <linux/usb/omap_control_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -254,6 +255,49 @@ static inline void omap_init_camera(void)
 #endif
 }
 
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
+static struct omap_control_usb_platform_data omap4_control_usb_pdata = {
+	.type = 1,
+};
+
+struct resource omap4_control_usb_res[] = {
+	{
+		.name	= "control_dev_conf",
+		.start	= 0x4a002300,
+		.end	= 0x4a002303,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "otghs_control",
+		.start	= 0x4a00233c,
+		.end	= 0x4a00233f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap4_control_usb = {
+	.name		= "omap-control-usb",
+	.id		= -1,
+	.dev = {
+		.platform_data = &omap4_control_usb_pdata,
+	},
+	.num_resources = 2,
+	.resource = omap4_control_usb_res,
+};
+
+static inline void __init omap_init_control_usb(void)
+{
+	if (!cpu_is_omap44xx())
+		return;
+
+	if (platform_device_register(&omap4_control_usb))
+		pr_err("Error registering omap_control_usb device\n");
+}
+
+#else
+static inline void omap_init_control_usb(void) { }
+#endif /* CONFIG_OMAP_CONTROL_USB */
+
 int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			*sdp4430_keypad_data, struct omap_board_data *bdata)
 {
@@ -721,6 +765,7 @@ static int __init omap2_init_devices(void)
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
+		omap_init_control_usb();
 		omap_init_dmic();
 		omap_init_mcpdm();
 		omap_init_mcspi();
-- 
1.7.10.4

[PATCH 2/5] ARM: OMAP: devices: create device for usb part of control module

[Kishon Vijay Abraham I]

A seperate driver has been added to handle the usb part of control
module. A device for the above driver is created here, using the register
address information to be used by the driver for powering on the PHY and
for writing to the mailbox.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/devices.c |   45 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 626f3ea..6cda103 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -20,6 +20,7 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/platform_data/omap_ocp2scp.h>
+#include <linux/usb/omap_control_usb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -254,6 +255,49 @@ static inline void omap_init_camera(void)
 #endif
 }
 
+#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
+static struct omap_control_usb_platform_data omap4_control_usb_pdata = {
+	.type = 1,
+};
+
+struct resource omap4_control_usb_res[] = {
+	{
+		.name	= "control_dev_conf",
+		.start	= 0x4a002300,
+		.end	= 0x4a002303,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.name	= "otghs_control",
+		.start	= 0x4a00233c,
+		.end	= 0x4a00233f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap4_control_usb = {
+	.name		= "omap-control-usb",
+	.id		= -1,
+	.dev = {
+		.platform_data = &omap4_control_usb_pdata,
+	},
+	.num_resources = 2,
+	.resource = omap4_control_usb_res,
+};
+
+static inline void __init omap_init_control_usb(void)
+{
+	if (!cpu_is_omap44xx())
+		return;
+
+	if (platform_device_register(&omap4_control_usb))
+		pr_err("Error registering omap_control_usb device\n");
+}
+
+#else
+static inline void omap_init_control_usb(void) { }
+#endif /* CONFIG_OMAP_CONTROL_USB */
+
 int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			*sdp4430_keypad_data, struct omap_board_data *bdata)
 {
@@ -721,6 +765,7 @@ static int __init omap2_init_devices(void)
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
+		omap_init_control_usb();
 		omap_init_dmic();
 		omap_init_mcpdm();
 		omap_init_mcspi();
-- 
1.7.10.4

[PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Kishon Vijay Abraham I]

Added has_mailbox to the musb platform data to specify that omap uses
an external mailbox (in control module) to communicate with the musb
core during device connect and disconnect.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/usb-musb.c |    3 +++
 include/linux/usb/musb.h       |    2 ++
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 7b33b37..9d27e3f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
+	if (cpu_is_omap44xx())
+		musb_plat.has_mailbox = true;
+
 	if (soc_is_am35xx()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index eb50525..053c268 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -99,6 +99,8 @@ struct musb_hdrc_platform_data {
 	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
 	u8		mode;
 
+	u8		has_mailbox:1;
+
 	/* for clk_get() */
 	const char	*clock;
 
-- 
1.7.10.4

[PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Kishon Vijay Abraham I]

Added has_mailbox to the musb platform data to specify that omap uses
an external mailbox (in control module) to communicate with the musb
core during device connect and disconnect.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/usb-musb.c |    3 +++
 include/linux/usb/musb.h       |    2 ++
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 7b33b37..9d27e3f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
+	if (cpu_is_omap44xx())
+		musb_plat.has_mailbox = true;
+
 	if (soc_is_am35xx()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index eb50525..053c268 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -99,6 +99,8 @@ struct musb_hdrc_platform_data {
 	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
 	u8		mode;
 
+	u8		has_mailbox:1;
+
 	/* for clk_get() */
 	const char	*clock;
 
-- 
1.7.10.4

[PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Kishon Vijay Abraham I]

Added has_mailbox to the musb platform data to specify that omap uses
an external mailbox (in control module) to communicate with the musb
core during device connect and disconnect.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/usb-musb.c |    3 +++
 include/linux/usb/musb.h       |    2 ++
 2 files changed, 5 insertions(+)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 7b33b37..9d27e3f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
+	if (cpu_is_omap44xx())
+		musb_plat.has_mailbox = true;
+
 	if (soc_is_am35xx()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index eb50525..053c268 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -99,6 +99,8 @@ struct musb_hdrc_platform_data {
 	/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
 	u8		mode;
 
+	u8		has_mailbox:1;
+
 	/* for clk_get() */
 	const char	*clock;
 
-- 
1.7.10.4

[PATCH 4/5] ARM: OMAP: USB: Add phy binding information

[Kishon Vijay Abraham I]

This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 17 files changed, 34 insertions(+)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 4815ea6..1337f2c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -263,6 +264,7 @@ static void __init omap_2430sdp_init(void)
 	omap_hsmmc_init(mmc);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bb73afc..8a2e242 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -579,6 +580,7 @@ static void __init omap_3430sdp_init(void)
 	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 1cc6696..8e8efcc 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,6 +28,7 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -696,6 +697,7 @@ static void __init omap_4430sdp_init(void)
 	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index b3102c2..f1172f2 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
@@ -724,6 +725,7 @@ static void __init cm_t3x_common_init(void)
 	cm_t35_init_display();
 	omap_twl4030_audio_init("cm-t3x");
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
 	cm_t35_init_camera();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 12865af..77cade52 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -622,6 +623,7 @@ static void __init devkit8000_init(void)
 
 	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(devkit8000_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 0f24cb8..15e5881 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -625,6 +626,7 @@ static void __init igep_init(void)
 	omap_serial_init();
 	omap_sdrc_init(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	igep_flash_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 0869f4f..3b5510a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -418,6 +419,7 @@ static void __init omap_ldp_init(void)
 	omap_ads7846_init(1, 54, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
 			ZOOM_NAND_CS, 0, nand_default_timings);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 22c483d..4616f92 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -519,6 +520,7 @@ static void __init omap3_beagle_init(void)
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35..a198b61 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -41,6 +41,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 #include <linux/export.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -734,6 +735,7 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3evm_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 2a065ba..9409eb8 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -29,6 +29,7 @@
 
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -215,6 +216,7 @@ static void __init omap3logic_init(void)
 	board_mmc_init();
 	board_smsc911x_init();
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index a53a668..1ac3e81 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -35,6 +35,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/regulator/fixed.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -601,6 +602,7 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	gpmc_nand_init(&pandora_nand_data, NULL);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 53a6cbc..63cb204 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -33,6 +33,7 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/i2c/at24.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -404,6 +405,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 263cb9c..6b22ce3 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/spi/spi.h>
@@ -365,6 +366,7 @@ static void __init omap3_touchbook_init(void)
 
 	/* Touchscreen and accelerometer */
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3touchbook_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 769c1fe..40184cc 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/ti_wilink_st.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -447,6 +448,7 @@ static void __init omap4_panda_init(void)
 	omap_sdrc_init(NULL, NULL);
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index c8fde3e..7e43ff3 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -36,6 +36,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -499,6 +500,7 @@ static void __init overo_init(void)
 				  mt46h32m32lf6_sdrc_params);
 	board_nand_init(overo_nand_partitions,
 			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0c777b7..f8a272c 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -18,6 +18,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -134,6 +135,7 @@ static void __init rm680_init(void)
 	sdrc_params = nokia_get_sdram_timings();
 	omap_sdrc_init(sdrc_params, sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 26e07ad..dc5498b 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -20,6 +20,7 @@
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -298,6 +299,7 @@ void __init zoom_peripherals_init(void)
 	omap_hsmmc_init(mmc);
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	enable_board_wakeup_source();
 	omap_serial_init();
-- 
1.7.10.4

[PATCH 4/5] ARM: OMAP: USB: Add phy binding information

[Kishon Vijay Abraham I]

This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 17 files changed, 34 insertions(+)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 4815ea6..1337f2c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -263,6 +264,7 @@ static void __init omap_2430sdp_init(void)
 	omap_hsmmc_init(mmc);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bb73afc..8a2e242 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -579,6 +580,7 @@ static void __init omap_3430sdp_init(void)
 	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 1cc6696..8e8efcc 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,6 +28,7 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -696,6 +697,7 @@ static void __init omap_4430sdp_init(void)
 	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index b3102c2..f1172f2 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
@@ -724,6 +725,7 @@ static void __init cm_t3x_common_init(void)
 	cm_t35_init_display();
 	omap_twl4030_audio_init("cm-t3x");
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
 	cm_t35_init_camera();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 12865af..77cade52 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -622,6 +623,7 @@ static void __init devkit8000_init(void)
 
 	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(devkit8000_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 0f24cb8..15e5881 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -625,6 +626,7 @@ static void __init igep_init(void)
 	omap_serial_init();
 	omap_sdrc_init(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	igep_flash_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 0869f4f..3b5510a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -418,6 +419,7 @@ static void __init omap_ldp_init(void)
 	omap_ads7846_init(1, 54, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
 			ZOOM_NAND_CS, 0, nand_default_timings);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 22c483d..4616f92 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -519,6 +520,7 @@ static void __init omap3_beagle_init(void)
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35..a198b61 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -41,6 +41,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 #include <linux/export.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -734,6 +735,7 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3evm_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 2a065ba..9409eb8 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -29,6 +29,7 @@
 
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -215,6 +216,7 @@ static void __init omap3logic_init(void)
 	board_mmc_init();
 	board_smsc911x_init();
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index a53a668..1ac3e81 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -35,6 +35,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/regulator/fixed.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -601,6 +602,7 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	gpmc_nand_init(&pandora_nand_data, NULL);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 53a6cbc..63cb204 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -33,6 +33,7 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/i2c/at24.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -404,6 +405,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 263cb9c..6b22ce3 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/spi/spi.h>
@@ -365,6 +366,7 @@ static void __init omap3_touchbook_init(void)
 
 	/* Touchscreen and accelerometer */
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3touchbook_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 769c1fe..40184cc 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/ti_wilink_st.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -447,6 +448,7 @@ static void __init omap4_panda_init(void)
 	omap_sdrc_init(NULL, NULL);
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index c8fde3e..7e43ff3 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -36,6 +36,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -499,6 +500,7 @@ static void __init overo_init(void)
 				  mt46h32m32lf6_sdrc_params);
 	board_nand_init(overo_nand_partitions,
 			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0c777b7..f8a272c 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -18,6 +18,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -134,6 +135,7 @@ static void __init rm680_init(void)
 	sdrc_params = nokia_get_sdram_timings();
 	omap_sdrc_init(sdrc_params, sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 26e07ad..dc5498b 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -20,6 +20,7 @@
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -298,6 +299,7 @@ void __init zoom_peripherals_init(void)
 	omap_hsmmc_init(mmc);
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	enable_board_wakeup_source();
 	omap_serial_init();
-- 
1.7.10.4

[PATCH 4/5] ARM: OMAP: USB: Add phy binding information

[Kishon Vijay Abraham I]

This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-2430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-3430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-4430sdp.c          |    2 ++
 arch/arm/mach-omap2/board-cm-t35.c           |    2 ++
 arch/arm/mach-omap2/board-devkit8000.c       |    2 ++
 arch/arm/mach-omap2/board-igep0020.c         |    2 ++
 arch/arm/mach-omap2/board-ldp.c              |    2 ++
 arch/arm/mach-omap2/board-omap3beagle.c      |    2 ++
 arch/arm/mach-omap2/board-omap3evm.c         |    2 ++
 arch/arm/mach-omap2/board-omap3logic.c       |    2 ++
 arch/arm/mach-omap2/board-omap3pandora.c     |    2 ++
 arch/arm/mach-omap2/board-omap3stalker.c     |    2 ++
 arch/arm/mach-omap2/board-omap3touchbook.c   |    2 ++
 arch/arm/mach-omap2/board-omap4panda.c       |    2 ++
 arch/arm/mach-omap2/board-overo.c            |    2 ++
 arch/arm/mach-omap2/board-rm680.c            |    2 ++
 arch/arm/mach-omap2/board-zoom-peripherals.c |    2 ++
 17 files changed, 34 insertions(+)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 4815ea6..1337f2c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -263,6 +264,7 @@ static void __init omap_2430sdp_init(void)
 	omap_hsmmc_init(mmc);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	board_smc91x_init();
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bb73afc..8a2e242 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -579,6 +580,7 @@ static void __init omap_3430sdp_init(void)
 	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 1cc6696..8e8efcc 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,6 +28,7 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -696,6 +697,7 @@ static void __init omap_4430sdp_init(void)
 	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index b3102c2..f1172f2 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
@@ -724,6 +725,7 @@ static void __init cm_t3x_common_init(void)
 	cm_t35_init_display();
 	omap_twl4030_audio_init("cm-t3x");
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
 	cm_t35_init_camera();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 12865af..77cade52 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -622,6 +623,7 @@ static void __init devkit8000_init(void)
 
 	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(devkit8000_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 0f24cb8..15e5881 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -625,6 +626,7 @@ static void __init igep_init(void)
 	omap_serial_init();
 	omap_sdrc_init(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	igep_flash_init();
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 0869f4f..3b5510a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -418,6 +419,7 @@ static void __init omap_ldp_init(void)
 	omap_ads7846_init(1, 54, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
 			ZOOM_NAND_CS, 0, nand_default_timings);
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 22c483d..4616f92 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -519,6 +520,7 @@ static void __init omap3_beagle_init(void)
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3beagle_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3985f35..a198b61 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -41,6 +41,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 #include <linux/export.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -734,6 +735,7 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3evm_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 2a065ba..9409eb8 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -29,6 +29,7 @@
 
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -215,6 +216,7 @@ static void __init omap3logic_init(void)
 	board_mmc_init();
 	board_smsc911x_init();
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index a53a668..1ac3e81 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -35,6 +35,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/regulator/fixed.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -601,6 +602,7 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	gpmc_nand_init(&pandora_nand_data, NULL);
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 53a6cbc..63cb204 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -33,6 +33,7 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/i2c/at24.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -404,6 +405,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 263cb9c..6b22ce3 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/spi/spi.h>
@@ -365,6 +366,7 @@ static void __init omap3_touchbook_init(void)
 
 	/* Touchscreen and accelerometer */
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3touchbook_nand_partitions,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 769c1fe..40184cc 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/ti_wilink_st.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -447,6 +448,7 @@ static void __init omap4_panda_init(void)
 	omap_sdrc_init(NULL, NULL);
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index c8fde3e..7e43ff3 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -36,6 +36,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -499,6 +500,7 @@ static void __init overo_init(void)
 				  mt46h32m32lf6_sdrc_params);
 	board_nand_init(overo_nand_partitions,
 			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0c777b7..f8a272c 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -18,6 +18,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -134,6 +135,7 @@ static void __init rm680_init(void)
 	sdrc_params = nokia_get_sdram_timings();
 	omap_sdrc_init(sdrc_params, sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 26e07ad..dc5498b 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -20,6 +20,7 @@
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -298,6 +299,7 @@ void __init zoom_peripherals_init(void)
 	omap_hsmmc_init(mmc);
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	enable_board_wakeup_source();
 	omap_serial_init();
-- 
1.7.10.4

[PATCH 5/5] usb: omap_control_usb: fix compile warning

[Kishon Vijay Abraham I]

From: Felipe Balbi <balbi@ti.com>

When CONFIG_OMAP_CONTROL_USB isn't enabled,
there's a compile warning stating that a
particular function isn't a prototype.

Fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 include/linux/usb/omap_control_usb.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index f306db7..27b5b8c 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -70,7 +70,7 @@ extern void omap_control_usb3_phy_power(struct device *dev, bool on);
 extern void omap_control_usb_set_mode(struct device *dev,
 	enum omap_control_usb_mode mode);
 #else
-static inline struct device *omap_get_control_dev()
+static inline struct device *omap_get_control_dev(void)
 {
 	return ERR_PTR(-ENODEV);
 }
-- 
1.7.10.4

[PATCH 5/5] usb: omap_control_usb: fix compile warning

[Kishon Vijay Abraham I]

From: Felipe Balbi <balbi@ti.com>

When CONFIG_OMAP_CONTROL_USB isn't enabled,
there's a compile warning stating that a
particular function isn't a prototype.

Fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 include/linux/usb/omap_control_usb.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index f306db7..27b5b8c 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -70,7 +70,7 @@ extern void omap_control_usb3_phy_power(struct device *dev, bool on);
 extern void omap_control_usb_set_mode(struct device *dev,
 	enum omap_control_usb_mode mode);
 #else
-static inline struct device *omap_get_control_dev()
+static inline struct device *omap_get_control_dev(void)
 {
 	return ERR_PTR(-ENODEV);
 }
-- 
1.7.10.4

[PATCH 5/5] usb: omap_control_usb: fix compile warning

[Kishon Vijay Abraham I]

From: Felipe Balbi <balbi@ti.com>

When CONFIG_OMAP_CONTROL_USB isn't enabled,
there's a compile warning stating that a
particular function isn't a prototype.

Fix it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 include/linux/usb/omap_control_usb.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index f306db7..27b5b8c 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -70,7 +70,7 @@ extern void omap_control_usb3_phy_power(struct device *dev, bool on);
 extern void omap_control_usb_set_mode(struct device *dev,
 	enum omap_control_usb_mode mode);
 #else
-static inline struct device *omap_get_control_dev()
+static inline struct device *omap_get_control_dev(void)
 {
 	return ERR_PTR(-ENODEV);
 }
-- 
1.7.10.4

Re: [PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Russell King - ARM Linux]

On Wed, Feb 06, 2013 at 11:28:11AM +0530, Kishon Vijay Abraham I wrote:
> Added has_mailbox to the musb platform data to specify that omap uses
> an external mailbox (in control module) to communicate with the musb
> core during device connect and disconnect.

So, I've been through your five patches looking for any other users of
"has_mailbox" and I can find none.  You introduce this in this patch,
and you set it.  But I don't see anything that uses it.

Write only variables are not useful.

[PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Russell King - ARM Linux]

On Wed, Feb 06, 2013 at 11:28:11AM +0530, Kishon Vijay Abraham I wrote:
> Added has_mailbox to the musb platform data to specify that omap uses
> an external mailbox (in control module) to communicate with the musb
> core during device connect and disconnect.

So, I've been through your five patches looking for any other users of
"has_mailbox" and I can find none.  You introduce this in this patch,
and you set it.  But I don't see anything that uses it.

Write only variables are not useful.

Re: [PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1245 bytes --]

Hi,

On Wed, Feb 06, 2013 at 10:57:13AM +0000, Russell King - ARM Linux wrote:
> On Wed, Feb 06, 2013 at 11:28:11AM +0530, Kishon Vijay Abraham I wrote:
> > Added has_mailbox to the musb platform data to specify that omap uses
> > an external mailbox (in control module) to communicate with the musb
> > core during device connect and disconnect.
> 
> So, I've been through your five patches looking for any other users of
> "has_mailbox" and I can find none.  You introduce this in this patch,
> and you set it.  But I don't see anything that uses it.
> 
> Write only variables are not useful.

looking back at what I sent Greg this was probably my fault. When taking
Kishon's patches (in particular $SUBJECT) I removed some of arch/arm/
code and ended up forgetting to add the include file which introduces
has_mailbox.

This means that my lack of attention has introduced a compile break on
Greg's tree. Oh well, s**t happens. In any case, the user is already in
Greg's tree and there's no way Greg will rebase his tree to amend
$SUBJECT there, so it will have to go separately.

I didn't even notice this before because I had the diff in my tree, just
forgot to git add and/or git reset. Too late now

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1245 bytes --]

Hi,

On Wed, Feb 06, 2013 at 10:57:13AM +0000, Russell King - ARM Linux wrote:
> On Wed, Feb 06, 2013 at 11:28:11AM +0530, Kishon Vijay Abraham I wrote:
> > Added has_mailbox to the musb platform data to specify that omap uses
> > an external mailbox (in control module) to communicate with the musb
> > core during device connect and disconnect.
> 
> So, I've been through your five patches looking for any other users of
> "has_mailbox" and I can find none.  You introduce this in this patch,
> and you set it.  But I don't see anything that uses it.
> 
> Write only variables are not useful.

looking back at what I sent Greg this was probably my fault. When taking
Kishon's patches (in particular $SUBJECT) I removed some of arch/arm/
code and ended up forgetting to add the include file which introduces
has_mailbox.

This means that my lack of attention has introduced a compile break on
Greg's tree. Oh well, s**t happens. In any case, the user is already in
Greg's tree and there's no way Greg will rebase his tree to amend
$SUBJECT there, so it will have to go separately.

I didn't even notice this before because I had the diff in my tree, just
forgot to git add and/or git reset. Too late now

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Felipe Balbi]

Hi,

On Wed, Feb 06, 2013 at 10:57:13AM +0000, Russell King - ARM Linux wrote:
> On Wed, Feb 06, 2013 at 11:28:11AM +0530, Kishon Vijay Abraham I wrote:
> > Added has_mailbox to the musb platform data to specify that omap uses
> > an external mailbox (in control module) to communicate with the musb
> > core during device connect and disconnect.
> 
> So, I've been through your five patches looking for any other users of
> "has_mailbox" and I can find none.  You introduce this in this patch,
> and you set it.  But I don't see anything that uses it.
> 
> Write only variables are not useful.

looking back at what I sent Greg this was probably my fault. When taking
Kishon's patches (in particular $SUBJECT) I removed some of arch/arm/
code and ended up forgetting to add the include file which introduces
has_mailbox.

This means that my lack of attention has introduced a compile break on
Greg's tree. Oh well, s**t happens. In any case, the user is already in
Greg's tree and there's no way Greg will rebase his tree to amend
$SUBJECT there, so it will have to go separately.

I didn't even notice this before because I had the diff in my tree, just
forgot to git add and/or git reset. Too late now

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130206/d47e6068/attachment.sig>

Re: [PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1782 bytes --]

Hi again,

On Wed, Feb 06, 2013 at 01:03:55PM +0200, Felipe Balbi wrote:
> Hi,
> 
> On Wed, Feb 06, 2013 at 10:57:13AM +0000, Russell King - ARM Linux wrote:
> > On Wed, Feb 06, 2013 at 11:28:11AM +0530, Kishon Vijay Abraham I wrote:
> > > Added has_mailbox to the musb platform data to specify that omap uses
> > > an external mailbox (in control module) to communicate with the musb
> > > core during device connect and disconnect.
> > 
> > So, I've been through your five patches looking for any other users of
> > "has_mailbox" and I can find none.  You introduce this in this patch,
> > and you set it.  But I don't see anything that uses it.
> > 
> > Write only variables are not useful.
> 
> looking back at what I sent Greg this was probably my fault. When taking
> Kishon's patches (in particular $SUBJECT) I removed some of arch/arm/
> code and ended up forgetting to add the include file which introduces
> has_mailbox.
> 
> This means that my lack of attention has introduced a compile break on
> Greg's tree. Oh well, s**t happens. In any case, the user is already in
> Greg's tree and there's no way Greg will rebase his tree to amend
> $SUBJECT there, so it will have to go separately.
> 
> I didn't even notice this before because I had the diff in my tree, just
> forgot to git add and/or git reset. Too late now

there's a little more to it. When running allmodconfig,
CONFIG_ARCH_MULTIPLATFORM is set but none of the other ARCHes
(ARCH_OMAP, ARCH_AT91, ARCH_VERSATILE, etc) are set, so it turned out
that the driver wasn't even included on my build test.

Russell, is this expected (the MULTIPLATFORM thing) ? Just so I fix my
build test scripts to use another defconfig instead of allmod and
allyes.

cheers

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 1782 bytes --]

Hi again,

On Wed, Feb 06, 2013 at 01:03:55PM +0200, Felipe Balbi wrote:
> Hi,
> 
> On Wed, Feb 06, 2013 at 10:57:13AM +0000, Russell King - ARM Linux wrote:
> > On Wed, Feb 06, 2013 at 11:28:11AM +0530, Kishon Vijay Abraham I wrote:
> > > Added has_mailbox to the musb platform data to specify that omap uses
> > > an external mailbox (in control module) to communicate with the musb
> > > core during device connect and disconnect.
> > 
> > So, I've been through your five patches looking for any other users of
> > "has_mailbox" and I can find none.  You introduce this in this patch,
> > and you set it.  But I don't see anything that uses it.
> > 
> > Write only variables are not useful.
> 
> looking back at what I sent Greg this was probably my fault. When taking
> Kishon's patches (in particular $SUBJECT) I removed some of arch/arm/
> code and ended up forgetting to add the include file which introduces
> has_mailbox.
> 
> This means that my lack of attention has introduced a compile break on
> Greg's tree. Oh well, s**t happens. In any case, the user is already in
> Greg's tree and there's no way Greg will rebase his tree to amend
> $SUBJECT there, so it will have to go separately.
> 
> I didn't even notice this before because I had the diff in my tree, just
> forgot to git add and/or git reset. Too late now

there's a little more to it. When running allmodconfig,
CONFIG_ARCH_MULTIPLATFORM is set but none of the other ARCHes
(ARCH_OMAP, ARCH_AT91, ARCH_VERSATILE, etc) are set, so it turned out
that the driver wasn't even included on my build test.

Russell, is this expected (the MULTIPLATFORM thing) ? Just so I fix my
build test scripts to use another defconfig instead of allmod and
allyes.

cheers

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Felipe Balbi]

Hi again,

On Wed, Feb 06, 2013 at 01:03:55PM +0200, Felipe Balbi wrote:
> Hi,
> 
> On Wed, Feb 06, 2013 at 10:57:13AM +0000, Russell King - ARM Linux wrote:
> > On Wed, Feb 06, 2013 at 11:28:11AM +0530, Kishon Vijay Abraham I wrote:
> > > Added has_mailbox to the musb platform data to specify that omap uses
> > > an external mailbox (in control module) to communicate with the musb
> > > core during device connect and disconnect.
> > 
> > So, I've been through your five patches looking for any other users of
> > "has_mailbox" and I can find none.  You introduce this in this patch,
> > and you set it.  But I don't see anything that uses it.
> > 
> > Write only variables are not useful.
> 
> looking back at what I sent Greg this was probably my fault. When taking
> Kishon's patches (in particular $SUBJECT) I removed some of arch/arm/
> code and ended up forgetting to add the include file which introduces
> has_mailbox.
> 
> This means that my lack of attention has introduced a compile break on
> Greg's tree. Oh well, s**t happens. In any case, the user is already in
> Greg's tree and there's no way Greg will rebase his tree to amend
> $SUBJECT there, so it will have to go separately.
> 
> I didn't even notice this before because I had the diff in my tree, just
> forgot to git add and/or git reset. Too late now

there's a little more to it. When running allmodconfig,
CONFIG_ARCH_MULTIPLATFORM is set but none of the other ARCHes
(ARCH_OMAP, ARCH_AT91, ARCH_VERSATILE, etc) are set, so it turned out
that the driver wasn't even included on my build test.

Russell, is this expected (the MULTIPLATFORM thing) ? Just so I fix my
build test scripts to use another defconfig instead of allmod and
allyes.

cheers

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130206/b774b2a4/attachment.sig>

Re: [PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Russell King - ARM Linux]

On Wed, Feb 06, 2013 at 01:22:31PM +0200, Felipe Balbi wrote:
> there's a little more to it. When running allmodconfig,
> CONFIG_ARCH_MULTIPLATFORM is set but none of the other ARCHes
> (ARCH_OMAP, ARCH_AT91, ARCH_VERSATILE, etc) are set, so it turned out
> that the driver wasn't even included on my build test.
> 
> Russell, is this expected (the MULTIPLATFORM thing) ? Just so I fix my
> build test scripts to use another defconfig instead of allmod and
> allyes.

Don't know.  Most of that logic is sitting in arm-soc.  Nothing obvious
stands out as to why that's happening.

The first thing to check is which of the CONFIG_ARCH_MULTI_* options are
set.  It should be ARCH_MULTI_V7 and ARCH_MULTI_V6_V7.  This should then
allow ARCH_OMAP2PLUS to be set.

However, I've said this before, and I'll say it again: if you want to use
the all* targets, it's better to seed the configuration so that you end
up with the platform you're targetting selected.  I've always done this
with the build system, and even before it when I've wanted to use the all*
targets, because generally I want that behaviour, but I want it for a
particular platform.

[PATCH 3/5] ARM: OMAP2: MUSB: Specify omap4 has mailbox

[Russell King - ARM Linux]

On Wed, Feb 06, 2013 at 01:22:31PM +0200, Felipe Balbi wrote:
> there's a little more to it. When running allmodconfig,
> CONFIG_ARCH_MULTIPLATFORM is set but none of the other ARCHes
> (ARCH_OMAP, ARCH_AT91, ARCH_VERSATILE, etc) are set, so it turned out
> that the driver wasn't even included on my build test.
> 
> Russell, is this expected (the MULTIPLATFORM thing) ? Just so I fix my
> build test scripts to use another defconfig instead of allmod and
> allyes.

Don't know.  Most of that logic is sitting in arm-soc.  Nothing obvious
stands out as to why that's happening.

The first thing to check is which of the CONFIG_ARCH_MULTI_* options are
set.  It should be ARCH_MULTI_V7 and ARCH_MULTI_V6_V7.  This should then
allow ARCH_OMAP2PLUS to be set.

However, I've said this before, and I'll say it again: if you want to use
the all* targets, it's better to seed the configuration so that you end
up with the platform you're targetting selected.  I've always done this
with the build system, and even before it when I've wanted to use the all*
targets, because generally I want that behaviour, but I want it for a
particular platform.

Re: [PATCH 2/5] ARM: OMAP: devices: create device for usb part of control module

[Sergei Shtylyov]

Hello.

On 06-02-2013 9:58, Kishon Vijay Abraham I wrote:

> A seperate driver has been added to handle the usb part of control
> module. A device for the above driver is created here, using the register
> address information to be used by the driver for powering on the PHY and
> for writing to the mailbox.

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> Acked-by: Tony Lindgren <tony@atomide.com>
> ---
>   arch/arm/mach-omap2/devices.c |   45 +++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 45 insertions(+)

> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
> index 626f3ea..6cda103 100644
> --- a/arch/arm/mach-omap2/devices.c
> +++ b/arch/arm/mach-omap2/devices.c
> @@ -20,6 +20,7 @@
[...]
> @@ -254,6 +255,49 @@ static inline void omap_init_camera(void)
[...]
> +static struct platform_device omap4_control_usb = {
> +	.name		= "omap-control-usb",
> +	.id		= -1,
> +	.dev = {
> +		.platform_data = &omap4_control_usb_pdata,
> +	},
> +	.num_resources = 2,
> +	.resource = omap4_control_usb_res,

    Either align = or not, not both at once.

> +};

WBR, Sergei

[PATCH 2/5] ARM: OMAP: devices: create device for usb part of control module

[Sergei Shtylyov]

Hello.

On 06-02-2013 9:58, Kishon Vijay Abraham I wrote:

> A seperate driver has been added to handle the usb part of control
> module. A device for the above driver is created here, using the register
> address information to be used by the driver for powering on the PHY and
> for writing to the mailbox.

> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> Acked-by: Tony Lindgren <tony@atomide.com>
> ---
>   arch/arm/mach-omap2/devices.c |   45 +++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 45 insertions(+)

> diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
> index 626f3ea..6cda103 100644
> --- a/arch/arm/mach-omap2/devices.c
> +++ b/arch/arm/mach-omap2/devices.c
> @@ -20,6 +20,7 @@
[...]
> @@ -254,6 +255,49 @@ static inline void omap_init_camera(void)
[...]
> +static struct platform_device omap4_control_usb = {
> +	.name		= "omap-control-usb",
> +	.id		= -1,
> +	.dev = {
> +		.platform_data = &omap4_control_usb_pdata,
> +	},
> +	.num_resources = 2,
> +	.resource = omap4_control_usb_res,

    Either align = or not, not both at once.

> +};

WBR, Sergei