From: Lars-Peter Clausen <lars@metafoo.de>
To: Jean Delvare <khali@linux-fr.org>, Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>,
Jonathan Cameron <jic23@cam.ac.uk>,
lm-sensors@lm-sensors.org, linux-iio@vger.kernel.org,
Lars-Peter Clausen <lars@metafoo.de>
Subject: [PATCH 2/9] hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEP
Date: Fri, 15 Feb 2013 17:57:11 +0100 [thread overview]
Message-ID: <1360947438-2550-2-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1360947438-2550-1-git-send-email-lars@metafoo.de>
Only build the suspend/resume code if CONFIG_PM_SLEEP is selected. Currently the
code is built if CONFIG_PM is selected, but it will also be selected if only
runtime PM support is built into the kernel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/hwmon/adt7410.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index 4ccee4f..ae80815 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -415,7 +415,7 @@ static const struct i2c_device_id adt7410_ids[] = {
};
MODULE_DEVICE_TABLE(i2c, adt7410_ids);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int adt7410_suspend(struct device *dev)
{
int ret;
--
1.8.0
WARNING: multiple messages have this Message-ID (diff)
From: Lars-Peter Clausen <lars@metafoo.de>
To: Jean Delvare <khali@linux-fr.org>, Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>,
Jonathan Cameron <jic23@cam.ac.uk>,
lm-sensors@lm-sensors.org, linux-iio@vger.kernel.org,
Lars-Peter Clausen <lars@metafoo.de>
Subject: [lm-sensors] [PATCH 2/9] hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEP
Date: Fri, 15 Feb 2013 16:57:11 +0000 [thread overview]
Message-ID: <1360947438-2550-2-git-send-email-lars@metafoo.de> (raw)
In-Reply-To: <1360947438-2550-1-git-send-email-lars@metafoo.de>
Only build the suspend/resume code if CONFIG_PM_SLEEP is selected. Currently the
code is built if CONFIG_PM is selected, but it will also be selected if only
runtime PM support is built into the kernel.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/hwmon/adt7410.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c
index 4ccee4f..ae80815 100644
--- a/drivers/hwmon/adt7410.c
+++ b/drivers/hwmon/adt7410.c
@@ -415,7 +415,7 @@ static const struct i2c_device_id adt7410_ids[] = {
};
MODULE_DEVICE_TABLE(i2c, adt7410_ids);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int adt7410_suspend(struct device *dev)
{
int ret;
--
1.8.0
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2013-02-15 16:56 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-15 16:57 [PATCH 1/9] hwmon: (adt7410) Clear unwanted bits in the config register Lars-Peter Clausen
2013-02-15 16:57 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 16:57 ` Lars-Peter Clausen [this message]
2013-02-15 16:57 ` [lm-sensors] [PATCH 2/9] hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEP Lars-Peter Clausen
2013-02-15 20:07 ` Guenter Roeck
2013-02-15 20:07 ` [lm-sensors] " Guenter Roeck
2013-02-19 23:07 ` Hartmut Knaack
2013-02-19 23:07 ` [lm-sensors] " Hartmut Knaack
2013-02-15 16:57 ` [PATCH 3/9] hwmon: (adt7410) Use the SIMPLE_DEV_PM_OPS helper macro Lars-Peter Clausen
2013-02-15 16:57 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 20:07 ` Guenter Roeck
2013-02-15 20:07 ` [lm-sensors] " Guenter Roeck
2013-02-19 23:13 ` Hartmut Knaack
2013-02-19 23:13 ` [lm-sensors] " Hartmut Knaack
2013-02-15 16:57 ` [PATCH 4/9] hwmon: (adt7410) Use I2C_ADDRS " Lars-Peter Clausen
2013-02-15 16:57 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 20:07 ` Guenter Roeck
2013-02-15 20:07 ` [lm-sensors] " Guenter Roeck
2013-02-19 23:17 ` Hartmut Knaack
2013-02-19 23:17 ` [lm-sensors] " Hartmut Knaack
2013-02-15 16:57 ` [PATCH 5/9] hwmon: (adt7410) Add device table entry for the adt7420 Lars-Peter Clausen
2013-02-15 16:57 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 20:08 ` Guenter Roeck
2013-02-15 20:08 ` [lm-sensors] " Guenter Roeck
2013-02-19 23:21 ` Hartmut Knaack
2013-02-19 23:21 ` [lm-sensors] " Hartmut Knaack
2013-02-21 0:10 ` Hartmut Knaack
2013-02-21 0:10 ` [lm-sensors] " Hartmut Knaack
2013-02-15 16:57 ` [PATCH 6/9] hwmon: (adt7410) Don't re-read non-volatile registers Lars-Peter Clausen
2013-02-15 16:57 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 20:20 ` Guenter Roeck
2013-02-15 20:20 ` [lm-sensors] " Guenter Roeck
2013-02-16 15:56 ` Lars-Peter Clausen
2013-02-16 15:56 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 16:57 ` [PATCH 7/9] hwmon: (adt7410) Add support for the adt7310/adt7320 Lars-Peter Clausen
2013-02-15 16:57 ` [lm-sensors] [PATCH 7/9] hwmon: (adt7410) Add =?utf-8?q?_support_for_the_adt73 Lars-Peter Clausen
2013-02-15 20:05 ` [PATCH 7/9] hwmon: (adt7410) Add support for the adt7310/adt7320 Hartmut Knaack
2013-02-15 20:05 ` [lm-sensors] " Hartmut Knaack
2013-02-16 0:40 ` Andrey Repin
2013-02-16 15:49 ` Lars-Peter Clausen
2013-02-16 15:54 ` Lars-Peter Clausen
2013-02-16 15:54 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 20:32 ` Guenter Roeck
2013-02-15 20:32 ` [lm-sensors] " Guenter Roeck
2013-02-16 16:04 ` Lars-Peter Clausen
2013-02-16 16:04 ` [lm-sensors] " Lars-Peter Clausen
2013-02-16 19:15 ` Guenter Roeck
2013-02-16 19:15 ` [lm-sensors] " Guenter Roeck
2013-02-15 16:57 ` [PATCH 8/9] hwmon: (adt7x10) Add alarm interrupt support Lars-Peter Clausen
2013-02-15 16:57 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 16:57 ` [PATCH 9/9] staging:iio: Remove adt7410 driver Lars-Peter Clausen
2013-02-15 16:57 ` [lm-sensors] " Lars-Peter Clausen
2013-02-15 20:06 ` [PATCH 1/9] hwmon: (adt7410) Clear unwanted bits in the config register Guenter Roeck
2013-02-15 20:06 ` [lm-sensors] " Guenter Roeck
2013-02-19 23:03 ` Hartmut Knaack
2013-02-19 23:03 ` [lm-sensors] " Hartmut Knaack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360947438-2550-2-git-send-email-lars@metafoo.de \
--to=lars@metafoo.de \
--cc=jic23@cam.ac.uk \
--cc=khali@linux-fr.org \
--cc=knaack.h@gmx.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.