From: Dmitry Monakhov <dmonakhov@openvz.org> To: xfs@oss.sgi.com Cc: linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org, dchinner@redhat.com, Dmitry Monakhov <dmonakhov@openvz.org> Subject: [PATCH 05/10] xfstest: allow fsstress to use load factor where appropriate Date: Wed, 20 Feb 2013 14:42:10 +0400 [thread overview] Message-ID: <1361356935-29153-6-git-send-email-dmonakhov@openvz.org> (raw) In-Reply-To: <1361356935-29153-1-git-send-email-dmonakhov@openvz.org> 1) Add _scale_fsstress_args function which transform argumets according to load factors 2) Let all non deterministic fsstress tests to use scaled arguments I've able to trigger OOPS on xfs see:https://gist.github.com/dmonakhov/4762653 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> --- 017 | 3 ++- 068 | 4 ++-- 070 | 5 +++-- 076 | 5 +++-- 083 | 4 ++-- 087 | 3 ++- 104 | 4 +++- 114 | 4 ++-- 167 | 5 +++-- 232 | 4 ++-- 232.out | 1 - 233 | 6 +++--- 233.out | 1 - 269 | 2 +- 270 | 2 +- common.rc | 14 ++++++++++++++ group | 26 +++++++++++++------------- 17 files changed, 56 insertions(+), 37 deletions(-) diff --git a/017 b/017 index 9ca0e72..7db4667 100755 --- a/017 +++ b/017 @@ -67,7 +67,8 @@ echo "*** test" for l in 0 1 2 3 4 do echo " *** test $l" - $FSSTRESS_PROG -d $SCRATCH_MNT -n 1000 $FSSTRESS_AVOID >>$seq.full + FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -n 1000 $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full _scratch_mount -o remount,ro \ || _fail "remount ro failed" diff --git a/068 b/068 index a641e2f..cbfea95 100755 --- a/068 +++ b/068 @@ -82,8 +82,8 @@ touch $tmp.running do # We do both read & write IO - not only is this more realistic, # but it also potentially tests atime updates - $FSSTRESS_PROG -d $STRESS_DIR -p $procs -n $nops $FSSTRESS_AVOID \ - > /dev/null 2>&1 + FSSTRESS_ARGS=`_scale_fsstress_args -d $STRESS_DIR -p $procs -n $nops $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS > /dev/null 2>&1 done rm -r $STRESS_DIR/* diff --git a/070 b/070 index f48c33c..334cce7 100755 --- a/070 +++ b/070 @@ -52,7 +52,7 @@ _require_attrs _setup_testdir -$FSSTRESS_PROG \ +FSSTRESS_ARGS=`_scale_fsstress_args \ -d $testdir/fsstress \ -f allocsp=0 \ -f freesp=0 \ @@ -62,7 +62,8 @@ $FSSTRESS_PROG \ -f unresvsp=0 \ -f attr_set=100 \ -f attr_remove=100 \ - -p 1 -n 10000 -S c >$seq.full 2>&1 + -p 1 -n 10000 -S c` +$FSSTRESS_PROG $FSSTRESS_ARGS >$seq.full 2>&1 status=$? exit diff --git a/076 b/076 index e472b26..793b869 100755 --- a/076 +++ b/076 @@ -74,8 +74,9 @@ echo "*** test concurrent block/fs access" cat $SCRATCH_DEV >/dev/null & pid=$! -$FSSTRESS_PROG -d $SCRATCH_MNT -p 2 -n 2000 $FSSTRESS_AVOID >>$seq.full - +FSSTRESS_ARGS=`_scale_fsstress_args -p 2 -n 2000 $FSSTRESS_AVOID` +echo "run fsstress with args: $FSSTRESS_ARGS" >>$seq.full +$FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full _lets_get_pidst _check_scratch_fs diff --git a/083 b/083 index e0670b9..f5349a9 100755 --- a/083 +++ b/083 @@ -84,8 +84,8 @@ workout() || _fail "mount failed" # -w ensures that the only ops are ones which cause write I/O - $FSSTRESS_PROG -d $SCRATCH_MNT -w -p $procs -n $nops $FSSTRESS_AVOID \ - >>$seq.full + FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -w -p $procs -n $nops $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full _check_scratch_fs } diff --git a/087 b/087 index 48e5eaa..e7be9a0 100755 --- a/087 +++ b/087 @@ -47,7 +47,8 @@ _do_meta() param="-p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 \ -f rename=30 -f stat=30 -f unlink=30 -f truncate=20" _echofull "calling fsstress $param -m8 -n $count" - if ! $FSSTRESS_PROG $param $FSSTRESS_AVOID -m 8 -n $count -d $out >>$seq.full 2>&1 + FSSTRESS_ARGS=`_scale_fsstress_args $param $FSSTRESS_AVOID -m 8 -n $count -d $out` + if ! $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full 2>&1 then _echofull "fsstress failed" fi diff --git a/104 b/104 index 14f2669..8db6d88 100755 --- a/104 +++ b/104 @@ -64,7 +64,9 @@ _stress_scratch() procs=3 nops=1000 # -w ensures that the only ops are ones which cause write I/O - $FSSTRESS_PROG -d $SCRATCH_MNT -w -p $procs -n $nops $FSSTRESS_AVOID > /dev/null & + FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -w -p $procs \ + -n $nops $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS >> $seq.full & } # real QA test starts here diff --git a/114 b/114 index 7679222..edce0f4 100755 --- a/114 +++ b/114 @@ -246,11 +246,11 @@ _test_fsstress() out=$SCRATCH_MNT/fsstress.$$ count=1000 - args="-z \ + args=`_scale_fsstress_args -z \ -f rmdir=10 -f link=10 -f creat=10 \ -f mkdir=10 -f rename=30 -f unlink=10 \ -f symlink=10 \ --n $count -d $out -p 3" +-n $count -d $out -p 3` echo "fsstress $args" | sed -e "s#$out#outdir#" if ! $FSSTRESS_PROG $args | _filter_num diff --git a/167 b/167 index ccb6c2a..5fb95e8 100755 --- a/167 +++ b/167 @@ -44,8 +44,9 @@ workout() { procs=100 nops=15000 - $FSSTRESS_PROG -d $SCRATCH_MNT -p $procs -n $nops $FSSTRESS_AVOID \ - >>$seq.full & + FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -p $procs -n $nops \ + $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS >> $seq.full & sleep 2 } diff --git a/232 b/232 index 2795da7..d915d42 100755 --- a/232 +++ b/232 @@ -54,9 +54,9 @@ _fsstress() out=$SCRATCH_MNT/fsstress.$$ count=2000 - args="-n $count -d $out -p 7" + args=`_scale_fsstress_args -d $out -n $count -p 7` - echo "fsstress $args" | tee -a $here/$seq.full | sed -e "s#$out#outdir#" + echo "fsstress $args" >> tee -a $here/$seq.full if ! $FSSTRESS_PROG $args | tee -a $here/$seq.full | _filter_num then echo " fsstress $args returned $?" diff --git a/232.out b/232.out index ef82a89..5da53d4 100644 --- a/232.out +++ b/232.out @@ -2,7 +2,6 @@ QA output created by 232 Testing fsstress -fsstress -n 2000 -d outdir -p 7 seed = S Comparing user usage Comparing group usage diff --git a/233 b/233 index 28e6ac7..649de51 100755 --- a/233 +++ b/233 @@ -58,12 +58,12 @@ _fsstress() out=$SCRATCH_MNT/fsstress.$$ count=5000 - args="-z \ + args=`_scale_fsstress_args -z \ -f rmdir=20 -f link=10 -f creat=10 -f mkdir=10 -f unlink=20 -f symlink=10 \ -f rename=10 -f fsync=2 -f write=15 -f dwrite=15 \ --n $count -d $out -p 7" +-n $count -d $out -p 7` - echo "fsstress $args" | tee -a $here/$seq.full | sed -e "s#$out#outdir#" + echo "fsstress $args" >> tee -a $here/$seq.full if ! su $qa_user -c "$FSSTRESS_PROG $args" | tee -a $here/$seq.full | _filter_num then echo " fsstress $args returned $?" diff --git a/233.out b/233.out index fa36ca3..91c1a30 100644 --- a/233.out +++ b/233.out @@ -2,7 +2,6 @@ QA output created by 233 Testing fsstress -fsstress -z -f rmdir=20 -f link=10 -f creat=10 -f mkdir=10 -f unlink=20 -f symlink=10 -f rename=10 -f fsync=2 -f write=15 -f dwrite=15 -n 5000 -d outdir -p 7 seed = S Comparing user usage Comparing group usage diff --git a/269 b/269 index 7e13ed9..7d63b87 100755 --- a/269 +++ b/269 @@ -45,7 +45,7 @@ _workout() num_iterations=10 enospc_time=2 out=$SCRATCH_MNT/fsstress.$$ - args="-p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out" + args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out` echo "fsstress $args" >> $here/$seq.full $FSSTRESS_PROG $args > /dev/null 2>&1 & pid=$! diff --git a/270 b/270 index b9ada27..b753923 100755 --- a/270 +++ b/270 @@ -48,7 +48,7 @@ _workout() num_iterations=10 enospc_time=2 out=$SCRATCH_MNT/fsstress.$$ - args="-p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out" + args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out` echo "fsstress $args" >> $here/$seq.full # Grant chown capability cp $FSSTRESS_PROG $tmp.fsstress.bin diff --git a/common.rc b/common.rc index 14de47b..3635a45 100644 --- a/common.rc +++ b/common.rc @@ -1841,6 +1841,20 @@ _test_batched_discard() $FSTRIM_PROG ${1} &>/dev/null } +_scale_fsstress_args() +{ + args="" + while [ $# -gt 0 ]; do + case "$1" in + -n) args="$args $1 $(($2 * $TIME_FACTOR))"; shift ;; + -p) args="$args $1 $(($2 * $LOAD_FACTOR))"; shift ;; + *) args="$args $1" ;; + esac + shift + done + echo $args +} + ################################################################################ if [ "$iam" != new -a "$iam" != bench ] diff --git a/group b/group index 5504557..1fb2feb 100644 --- a/group +++ b/group @@ -137,7 +137,7 @@ stress 014 rw udf auto quick 015 other auto quick 016 rw auto quick -017 mount auto quick +017 mount auto quick stress 018 deprecated # log logprint v2log 019 mkfs auto quick 020 metadata attr udf auto quick @@ -188,26 +188,26 @@ stress 065 dump auto 066 dump ioctl auto quick 067 acl attr auto quick -068 other auto freeze dangerous +068 other auto freeze dangerous stress 069 rw udf auto quick -070 attr udf auto quick +070 attr udf auto quick stress 071 rw auto 072 rw auto prealloc quick 073 copy auto 074 rw udf auto 075 rw udf auto quick -076 metadata rw udf auto quick +076 metadata rw udf auto quick stress 077 acl attr auto enospc 078 growfs auto quick 079 acl attr ioctl metadata auto quick 080 rw ioctl 081 deprecated # log logprint quota 082 deprecated # log logprint v2log -083 rw auto +083 rw auto enospc stress 084 ioctl rw auto 085 log auto quick 086 log v2log auto -087 log v2log auto quota +087 log v2log auto quota stress 088 perms auto quick 089 metadata auto 090 rw auto @@ -224,7 +224,7 @@ stress 101 udf 102 udf 103 metadata dir ioctl auto quick -104 growfs ioctl prealloc auto +104 growfs ioctl prealloc auto stress 105 acl auto quick 106 quota 107 quota @@ -234,7 +234,7 @@ stress 111 ioctl 112 rw aio auto quick 113 rw aio auto quick -114 parent attr +114 parent attr stress 115 parent attr 116 quota auto quick 117 attr auto quick @@ -287,7 +287,7 @@ stress 164 rw pattern auto prealloc quick 165 rw pattern auto prealloc quick 166 rw metadata auto quick -167 rw metadata auto +167 rw metadata auto stress 168 dmapi auto 169 rw metadata auto quick 170 rw filestreams auto quick @@ -355,8 +355,8 @@ stress 229 auto rw 230 auto quota quick 231 auto quota -232 auto quota -233 auto quota +232 auto quota stress +233 auto quota stress 234 auto quota 235 auto quota quick 236 auto quick metadata @@ -392,8 +392,8 @@ stress 266 dump ioctl auto quick 267 dump ioctl tape 268 dump ioctl tape -269 auto rw prealloc ioctl enospc -270 auto quota rw prealloc ioctl enospc +269 auto rw prealloc ioctl enospc stress +270 auto quota rw prealloc ioctl enospc stress 271 auto rw quick 272 auto enospc rw 273 auto rw -- 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Monakhov <dmonakhov@openvz.org> To: xfs@oss.sgi.com Cc: linux-fsdevel@vger.kernel.org, Dmitry Monakhov <dmonakhov@openvz.org>, linux-ext4@vger.kernel.org, dchinner@redhat.com Subject: [PATCH 05/10] xfstest: allow fsstress to use load factor where appropriate Date: Wed, 20 Feb 2013 14:42:10 +0400 [thread overview] Message-ID: <1361356935-29153-6-git-send-email-dmonakhov@openvz.org> (raw) In-Reply-To: <1361356935-29153-1-git-send-email-dmonakhov@openvz.org> 1) Add _scale_fsstress_args function which transform argumets according to load factors 2) Let all non deterministic fsstress tests to use scaled arguments I've able to trigger OOPS on xfs see:https://gist.github.com/dmonakhov/4762653 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> --- 017 | 3 ++- 068 | 4 ++-- 070 | 5 +++-- 076 | 5 +++-- 083 | 4 ++-- 087 | 3 ++- 104 | 4 +++- 114 | 4 ++-- 167 | 5 +++-- 232 | 4 ++-- 232.out | 1 - 233 | 6 +++--- 233.out | 1 - 269 | 2 +- 270 | 2 +- common.rc | 14 ++++++++++++++ group | 26 +++++++++++++------------- 17 files changed, 56 insertions(+), 37 deletions(-) diff --git a/017 b/017 index 9ca0e72..7db4667 100755 --- a/017 +++ b/017 @@ -67,7 +67,8 @@ echo "*** test" for l in 0 1 2 3 4 do echo " *** test $l" - $FSSTRESS_PROG -d $SCRATCH_MNT -n 1000 $FSSTRESS_AVOID >>$seq.full + FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -n 1000 $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full _scratch_mount -o remount,ro \ || _fail "remount ro failed" diff --git a/068 b/068 index a641e2f..cbfea95 100755 --- a/068 +++ b/068 @@ -82,8 +82,8 @@ touch $tmp.running do # We do both read & write IO - not only is this more realistic, # but it also potentially tests atime updates - $FSSTRESS_PROG -d $STRESS_DIR -p $procs -n $nops $FSSTRESS_AVOID \ - > /dev/null 2>&1 + FSSTRESS_ARGS=`_scale_fsstress_args -d $STRESS_DIR -p $procs -n $nops $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS > /dev/null 2>&1 done rm -r $STRESS_DIR/* diff --git a/070 b/070 index f48c33c..334cce7 100755 --- a/070 +++ b/070 @@ -52,7 +52,7 @@ _require_attrs _setup_testdir -$FSSTRESS_PROG \ +FSSTRESS_ARGS=`_scale_fsstress_args \ -d $testdir/fsstress \ -f allocsp=0 \ -f freesp=0 \ @@ -62,7 +62,8 @@ $FSSTRESS_PROG \ -f unresvsp=0 \ -f attr_set=100 \ -f attr_remove=100 \ - -p 1 -n 10000 -S c >$seq.full 2>&1 + -p 1 -n 10000 -S c` +$FSSTRESS_PROG $FSSTRESS_ARGS >$seq.full 2>&1 status=$? exit diff --git a/076 b/076 index e472b26..793b869 100755 --- a/076 +++ b/076 @@ -74,8 +74,9 @@ echo "*** test concurrent block/fs access" cat $SCRATCH_DEV >/dev/null & pid=$! -$FSSTRESS_PROG -d $SCRATCH_MNT -p 2 -n 2000 $FSSTRESS_AVOID >>$seq.full - +FSSTRESS_ARGS=`_scale_fsstress_args -p 2 -n 2000 $FSSTRESS_AVOID` +echo "run fsstress with args: $FSSTRESS_ARGS" >>$seq.full +$FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full _lets_get_pidst _check_scratch_fs diff --git a/083 b/083 index e0670b9..f5349a9 100755 --- a/083 +++ b/083 @@ -84,8 +84,8 @@ workout() || _fail "mount failed" # -w ensures that the only ops are ones which cause write I/O - $FSSTRESS_PROG -d $SCRATCH_MNT -w -p $procs -n $nops $FSSTRESS_AVOID \ - >>$seq.full + FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -w -p $procs -n $nops $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full _check_scratch_fs } diff --git a/087 b/087 index 48e5eaa..e7be9a0 100755 --- a/087 +++ b/087 @@ -47,7 +47,8 @@ _do_meta() param="-p 4 -z -f rmdir=10 -f link=10 -f creat=10 -f mkdir=10 \ -f rename=30 -f stat=30 -f unlink=30 -f truncate=20" _echofull "calling fsstress $param -m8 -n $count" - if ! $FSSTRESS_PROG $param $FSSTRESS_AVOID -m 8 -n $count -d $out >>$seq.full 2>&1 + FSSTRESS_ARGS=`_scale_fsstress_args $param $FSSTRESS_AVOID -m 8 -n $count -d $out` + if ! $FSSTRESS_PROG $FSSTRESS_ARGS >>$seq.full 2>&1 then _echofull "fsstress failed" fi diff --git a/104 b/104 index 14f2669..8db6d88 100755 --- a/104 +++ b/104 @@ -64,7 +64,9 @@ _stress_scratch() procs=3 nops=1000 # -w ensures that the only ops are ones which cause write I/O - $FSSTRESS_PROG -d $SCRATCH_MNT -w -p $procs -n $nops $FSSTRESS_AVOID > /dev/null & + FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -w -p $procs \ + -n $nops $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS >> $seq.full & } # real QA test starts here diff --git a/114 b/114 index 7679222..edce0f4 100755 --- a/114 +++ b/114 @@ -246,11 +246,11 @@ _test_fsstress() out=$SCRATCH_MNT/fsstress.$$ count=1000 - args="-z \ + args=`_scale_fsstress_args -z \ -f rmdir=10 -f link=10 -f creat=10 \ -f mkdir=10 -f rename=30 -f unlink=10 \ -f symlink=10 \ --n $count -d $out -p 3" +-n $count -d $out -p 3` echo "fsstress $args" | sed -e "s#$out#outdir#" if ! $FSSTRESS_PROG $args | _filter_num diff --git a/167 b/167 index ccb6c2a..5fb95e8 100755 --- a/167 +++ b/167 @@ -44,8 +44,9 @@ workout() { procs=100 nops=15000 - $FSSTRESS_PROG -d $SCRATCH_MNT -p $procs -n $nops $FSSTRESS_AVOID \ - >>$seq.full & + FSSTRESS_ARGS=`_scale_fsstress_args -d $SCRATCH_MNT -p $procs -n $nops \ + $FSSTRESS_AVOID` + $FSSTRESS_PROG $FSSTRESS_ARGS >> $seq.full & sleep 2 } diff --git a/232 b/232 index 2795da7..d915d42 100755 --- a/232 +++ b/232 @@ -54,9 +54,9 @@ _fsstress() out=$SCRATCH_MNT/fsstress.$$ count=2000 - args="-n $count -d $out -p 7" + args=`_scale_fsstress_args -d $out -n $count -p 7` - echo "fsstress $args" | tee -a $here/$seq.full | sed -e "s#$out#outdir#" + echo "fsstress $args" >> tee -a $here/$seq.full if ! $FSSTRESS_PROG $args | tee -a $here/$seq.full | _filter_num then echo " fsstress $args returned $?" diff --git a/232.out b/232.out index ef82a89..5da53d4 100644 --- a/232.out +++ b/232.out @@ -2,7 +2,6 @@ QA output created by 232 Testing fsstress -fsstress -n 2000 -d outdir -p 7 seed = S Comparing user usage Comparing group usage diff --git a/233 b/233 index 28e6ac7..649de51 100755 --- a/233 +++ b/233 @@ -58,12 +58,12 @@ _fsstress() out=$SCRATCH_MNT/fsstress.$$ count=5000 - args="-z \ + args=`_scale_fsstress_args -z \ -f rmdir=20 -f link=10 -f creat=10 -f mkdir=10 -f unlink=20 -f symlink=10 \ -f rename=10 -f fsync=2 -f write=15 -f dwrite=15 \ --n $count -d $out -p 7" +-n $count -d $out -p 7` - echo "fsstress $args" | tee -a $here/$seq.full | sed -e "s#$out#outdir#" + echo "fsstress $args" >> tee -a $here/$seq.full if ! su $qa_user -c "$FSSTRESS_PROG $args" | tee -a $here/$seq.full | _filter_num then echo " fsstress $args returned $?" diff --git a/233.out b/233.out index fa36ca3..91c1a30 100644 --- a/233.out +++ b/233.out @@ -2,7 +2,6 @@ QA output created by 233 Testing fsstress -fsstress -z -f rmdir=20 -f link=10 -f creat=10 -f mkdir=10 -f unlink=20 -f symlink=10 -f rename=10 -f fsync=2 -f write=15 -f dwrite=15 -n 5000 -d outdir -p 7 seed = S Comparing user usage Comparing group usage diff --git a/269 b/269 index 7e13ed9..7d63b87 100755 --- a/269 +++ b/269 @@ -45,7 +45,7 @@ _workout() num_iterations=10 enospc_time=2 out=$SCRATCH_MNT/fsstress.$$ - args="-p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out" + args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out` echo "fsstress $args" >> $here/$seq.full $FSSTRESS_PROG $args > /dev/null 2>&1 & pid=$! diff --git a/270 b/270 index b9ada27..b753923 100755 --- a/270 +++ b/270 @@ -48,7 +48,7 @@ _workout() num_iterations=10 enospc_time=2 out=$SCRATCH_MNT/fsstress.$$ - args="-p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out" + args=`_scale_fsstress_args -p128 -n999999999 -f setattr=1 $FSSTRESS_AVOID -d $out` echo "fsstress $args" >> $here/$seq.full # Grant chown capability cp $FSSTRESS_PROG $tmp.fsstress.bin diff --git a/common.rc b/common.rc index 14de47b..3635a45 100644 --- a/common.rc +++ b/common.rc @@ -1841,6 +1841,20 @@ _test_batched_discard() $FSTRIM_PROG ${1} &>/dev/null } +_scale_fsstress_args() +{ + args="" + while [ $# -gt 0 ]; do + case "$1" in + -n) args="$args $1 $(($2 * $TIME_FACTOR))"; shift ;; + -p) args="$args $1 $(($2 * $LOAD_FACTOR))"; shift ;; + *) args="$args $1" ;; + esac + shift + done + echo $args +} + ################################################################################ if [ "$iam" != new -a "$iam" != bench ] diff --git a/group b/group index 5504557..1fb2feb 100644 --- a/group +++ b/group @@ -137,7 +137,7 @@ stress 014 rw udf auto quick 015 other auto quick 016 rw auto quick -017 mount auto quick +017 mount auto quick stress 018 deprecated # log logprint v2log 019 mkfs auto quick 020 metadata attr udf auto quick @@ -188,26 +188,26 @@ stress 065 dump auto 066 dump ioctl auto quick 067 acl attr auto quick -068 other auto freeze dangerous +068 other auto freeze dangerous stress 069 rw udf auto quick -070 attr udf auto quick +070 attr udf auto quick stress 071 rw auto 072 rw auto prealloc quick 073 copy auto 074 rw udf auto 075 rw udf auto quick -076 metadata rw udf auto quick +076 metadata rw udf auto quick stress 077 acl attr auto enospc 078 growfs auto quick 079 acl attr ioctl metadata auto quick 080 rw ioctl 081 deprecated # log logprint quota 082 deprecated # log logprint v2log -083 rw auto +083 rw auto enospc stress 084 ioctl rw auto 085 log auto quick 086 log v2log auto -087 log v2log auto quota +087 log v2log auto quota stress 088 perms auto quick 089 metadata auto 090 rw auto @@ -224,7 +224,7 @@ stress 101 udf 102 udf 103 metadata dir ioctl auto quick -104 growfs ioctl prealloc auto +104 growfs ioctl prealloc auto stress 105 acl auto quick 106 quota 107 quota @@ -234,7 +234,7 @@ stress 111 ioctl 112 rw aio auto quick 113 rw aio auto quick -114 parent attr +114 parent attr stress 115 parent attr 116 quota auto quick 117 attr auto quick @@ -287,7 +287,7 @@ stress 164 rw pattern auto prealloc quick 165 rw pattern auto prealloc quick 166 rw metadata auto quick -167 rw metadata auto +167 rw metadata auto stress 168 dmapi auto 169 rw metadata auto quick 170 rw filestreams auto quick @@ -355,8 +355,8 @@ stress 229 auto rw 230 auto quota quick 231 auto quota -232 auto quota -233 auto quota +232 auto quota stress +233 auto quota stress 234 auto quota 235 auto quota quick 236 auto quick metadata @@ -392,8 +392,8 @@ stress 266 dump ioctl auto quick 267 dump ioctl tape 268 dump ioctl tape -269 auto rw prealloc ioctl enospc -270 auto quota rw prealloc ioctl enospc +269 auto rw prealloc ioctl enospc stress +270 auto quota rw prealloc ioctl enospc stress 271 auto rw quick 272 auto enospc rw 273 auto rw -- 1.7.1 _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-02-20 10:42 UTC|newest] Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-02-20 10:42 [PATCH 00/10] xfstests: Stress tests improments v5 Dmitry Monakhov 2013-02-20 10:42 ` [PATCH 01/10] xfstests: add fio requirement V2 Dmitry Monakhov 2013-02-20 10:42 ` Dmitry Monakhov 2013-03-01 15:43 ` Rich Johnston 2013-03-01 15:43 ` Rich Johnston 2013-02-20 10:42 ` [PATCH 02/10] xfstest: add configurable load factors Dmitry Monakhov 2013-02-20 10:42 ` Dmitry Monakhov 2013-03-01 15:43 ` Rich Johnston 2013-02-20 10:42 ` [PATCH 03/10] xfstests: hardcode fops for determinable fsstests runs Dmitry Monakhov 2013-02-20 10:42 ` Dmitry Monakhov 2013-03-01 15:43 ` Rich Johnston 2013-03-01 15:43 ` Rich Johnston 2013-02-20 10:42 ` [PATCH 04/10] xfstets: fsstress add replace file operation Dmitry Monakhov 2013-03-01 15:43 ` Rich Johnston 2013-02-20 10:42 ` Dmitry Monakhov [this message] 2013-02-20 10:42 ` [PATCH 05/10] xfstest: allow fsstress to use load factor where appropriate Dmitry Monakhov 2013-03-01 15:43 ` Rich Johnston 2013-02-20 10:42 ` [PATCH 06/10] xfstest: move run_check to common.rc Dmitry Monakhov 2013-02-20 10:42 ` Dmitry Monakhov 2013-03-01 15:44 ` Rich Johnston 2013-02-20 10:42 ` [PATCH 07/10] xfstest: add fallocate/truncate vs AIO/DIO stress test Dmitry Monakhov 2013-02-20 10:42 ` Dmitry Monakhov 2013-03-01 17:49 ` Rich Johnston 2013-03-01 17:49 ` Rich Johnston 2013-02-20 10:42 ` [PATCH 08/10] xfstest: add fallocate/punch_hole " Dmitry Monakhov 2013-02-20 10:42 ` Dmitry Monakhov 2013-03-01 17:50 ` Rich Johnston 2013-03-01 17:50 ` Rich Johnston 2013-02-20 10:42 ` [PATCH 09/10] xfstest: add defragmentation stress tests for ext4 Dmitry Monakhov 2013-02-20 10:42 ` Dmitry Monakhov 2013-03-01 19:23 ` Rich Johnston 2013-03-01 19:23 ` Rich Johnston 2013-03-02 1:30 ` Dmitry Monakhov 2013-03-02 1:30 ` Dmitry Monakhov 2013-03-04 23:19 ` Rich Johnston 2013-03-03 16:43 ` Zheng Liu 2013-03-03 16:43 ` Zheng Liu 2013-03-03 17:23 ` Zheng Liu 2013-03-03 17:23 ` Zheng Liu 2013-02-20 10:42 ` [PATCH 10/10] xfstests: add disk failure simulation test Dmitry Monakhov 2013-02-20 10:42 ` Dmitry Monakhov 2013-03-01 20:11 ` Rich Johnston 2013-03-02 1:49 ` Dmitry Monakhov 2013-03-04 23:44 ` Rich Johnston 2013-02-25 15:45 ` [PATCH 00/10] xfstests: Stress tests improments v5 Theodore Ts'o 2013-02-25 15:45 ` Theodore Ts'o 2013-02-25 21:28 ` Ben Myers 2013-02-25 21:28 ` Ben Myers 2013-02-25 22:09 ` Dave Chinner 2013-02-25 22:09 ` Dave Chinner 2013-02-25 23:00 ` Ben Myers 2013-02-25 23:00 ` Ben Myers 2013-03-01 20:23 ` Rich Johnston
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1361356935-29153-6-git-send-email-dmonakhov@openvz.org \ --to=dmonakhov@openvz.org \ --cc=dchinner@redhat.com \ --cc=linux-ext4@vger.kernel.org \ --cc=linux-fsdevel@vger.kernel.org \ --cc=xfs@oss.sgi.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.