* [PATCH 0/2] Fix eDP breakages on HP Z1 desktop
@ 2013-03-12 15:32 Takashi Iwai
2013-03-12 15:32 ` [PATCH 1/2] Revert "drm/i915: try to train DP even harder" Takashi Iwai
2013-03-12 15:32 ` [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n() Takashi Iwai
0 siblings, 2 replies; 7+ messages in thread
From: Takashi Iwai @ 2013-03-12 15:32 UTC (permalink / raw)
To: Daniel Vetter; +Cc: intel-gfx, linux-kernel
Hi,
this is a patch series to fix the breakages of eDP output on HP Z1
desktop machine with IvyBridge since 3.6 kernel.
The first patch is identical as what I already sent yesterday, reverting
a bogus check in the dp train loop. The second one is the patch I cooked
today, for using the correct pixel clock for the fixed eDP panel.
I guess the second patch won't be applied cleanly to the old kernels,
so it'd need to be sent individually to stable kernel if needed.
thanks,
Takashi
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] Revert "drm/i915: try to train DP even harder"
2013-03-12 15:32 [PATCH 0/2] Fix eDP breakages on HP Z1 desktop Takashi Iwai
@ 2013-03-12 15:32 ` Takashi Iwai
2013-03-12 15:32 ` [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n() Takashi Iwai
1 sibling, 0 replies; 7+ messages in thread
From: Takashi Iwai @ 2013-03-12 15:32 UTC (permalink / raw)
To: Daniel Vetter; +Cc: intel-gfx, linux-kernel
This reverts commit 0d71068835e2610576d369d6d4cbf90e0f802a71.
Not only that the commit introduces a bogus check (voltage_tries == 5
will never meet at the inserted code path), it may bring the driver into
an endless DP-link-train loop (and actually it does on HP Z1 with eDP).
We can add a better check for the intended purpose of that commit, but
let's revert the wrong "fix" at first.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
drivers/gpu/drm/i915/intel_dp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index f61cb79..7d250aa 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1929,7 +1929,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
for (i = 0; i < intel_dp->lane_count; i++)
if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
- if (i == intel_dp->lane_count && voltage_tries == 5) {
+ if (i == intel_dp->lane_count) {
++loop_tries;
if (loop_tries == 5) {
DRM_DEBUG_KMS("too many full retries, give up\n");
--
1.8.1.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()
2013-03-12 15:32 [PATCH 0/2] Fix eDP breakages on HP Z1 desktop Takashi Iwai
2013-03-12 15:32 ` [PATCH 1/2] Revert "drm/i915: try to train DP even harder" Takashi Iwai
@ 2013-03-12 15:32 ` Takashi Iwai
2013-03-17 22:12 ` Daniel Vetter
1 sibling, 1 reply; 7+ messages in thread
From: Takashi Iwai @ 2013-03-12 15:32 UTC (permalink / raw)
To: Daniel Vetter; +Cc: intel-gfx, linux-kernel
The eDP output on HP Z1 is still broken when X is started even after
fixing the infinite link-train loop. The regression was introduced in
3.6 kernel for cleaning up the mode clock handling code in intel_dp.c.
In the past, the clock of the reference mode was modified in
intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was
used for calculating in intel_dp_set_m_n(). This override was removed,
thus the wrong mode clock is used for the calculation, resulting in a
psychedelic smoking output in the end.
This patch corrects the clock to be used in the place.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
drivers/gpu/drm/i915/intel_dp.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 7d250aa..ddbf50f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -819,6 +819,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct intel_link_m_n m_n;
int pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ int pixel_clock = mode->clock;
/*
* Find the lane count in the intel_encoder private
@@ -826,6 +827,13 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
intel_dp = enc_to_intel_dp(&intel_encoder->base);
+ if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+ struct drm_display_mode *fixed_mode =
+ intel_dp->attached_connector->panel.fixed_mode;
+ if (fixed_mode)
+ pixel_clock = fixed_mode->clock;
+ }
+
if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT ||
intel_encoder->type == INTEL_OUTPUT_EDP)
{
@@ -840,7 +848,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
intel_link_compute_m_n(intel_crtc->bpp, lane_count,
- mode->clock, adjusted_mode->clock, &m_n);
+ pixel_clock, adjusted_mode->clock, &m_n);
if (IS_HASWELL(dev)) {
I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
--
1.8.1.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()
2013-03-12 15:32 ` [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n() Takashi Iwai
@ 2013-03-17 22:12 ` Daniel Vetter
2013-03-18 9:29 ` Takashi Iwai
0 siblings, 1 reply; 7+ messages in thread
From: Daniel Vetter @ 2013-03-17 22:12 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Daniel Vetter, intel-gfx, linux-kernel
On Tue, Mar 12, 2013 at 04:32:28PM +0100, Takashi Iwai wrote:
> The eDP output on HP Z1 is still broken when X is started even after
> fixing the infinite link-train loop. The regression was introduced in
> 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c.
>
> In the past, the clock of the reference mode was modified in
> intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was
> used for calculating in intel_dp_set_m_n(). This override was removed,
> thus the wrong mode clock is used for the calculation, resulting in a
> psychedelic smoking output in the end.
>
> This patch corrects the clock to be used in the place.
>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
I truly hate this mess of dotclock vs portclock vs. whatever. Can you pls
apply a little bikeshed and use the existing intel_edp_target_clock like
in ironlake_set_m_n? And if you have the regressing commit a little
citation to assign the blame (it's probably me) would be good.
Thanks, Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()
2013-03-17 22:12 ` Daniel Vetter
@ 2013-03-18 9:29 ` Takashi Iwai
2013-03-18 10:26 ` Daniel Vetter
0 siblings, 1 reply; 7+ messages in thread
From: Takashi Iwai @ 2013-03-18 9:29 UTC (permalink / raw)
To: Daniel Vetter; +Cc: Daniel Vetter, intel-gfx, linux-kernel
At Sun, 17 Mar 2013 23:12:03 +0100,
Daniel Vetter wrote:
>
> On Tue, Mar 12, 2013 at 04:32:28PM +0100, Takashi Iwai wrote:
> > The eDP output on HP Z1 is still broken when X is started even after
> > fixing the infinite link-train loop. The regression was introduced in
> > 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c.
> >
> > In the past, the clock of the reference mode was modified in
> > intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was
> > used for calculating in intel_dp_set_m_n(). This override was removed,
> > thus the wrong mode clock is used for the calculation, resulting in a
> > psychedelic smoking output in the end.
> >
> > This patch corrects the clock to be used in the place.
> >
> > Cc: <stable@vger.kernel.org>
> > Signed-off-by: Takashi Iwai <tiwai@suse.de>
>
> I truly hate this mess of dotclock vs portclock vs. whatever. Can you pls
> apply a little bikeshed and use the existing intel_edp_target_clock like
> in ironlake_set_m_n? And if you have the regressing commit a little
> citation to assign the blame (it's probably me) would be good.
OK, the revised patch is below.
thanks,
Takashi
---
From: Takashi Iwai <tiwai@suse.de>
Subject: [PATCH v2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()
The eDP output on HP Z1 is still broken when X is started even after
fixing the infinite link-train loop. The regression was introduced in
3.6 kernel for cleaning up the mode clock handling code in intel_dp.c
by the commit [71244653: drm/i915: adjusted_mode->clock in the dp
mode_fix].
In the past, the clock of the reference mode was modified in
intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was
used for calculating in intel_dp_set_m_n(). This override was removed,
thus the wrong mode clock is used for the calculation, resulting in a
psychedelic smoking output in the end.
This patch corrects the clock to be used in the place.
v1->v2: Use intel_edp_target_clock() for checking eDP fixed clock
instead of open code as in ironlake_set_m_n().
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
drivers/gpu/drm/i915/intel_dp.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 6f728e5..2606811 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -820,6 +820,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct intel_link_m_n m_n;
int pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
+ int target_clock;
/*
* Find the lane count in the intel_encoder private
@@ -835,13 +836,22 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
}
}
+ target_clock = mode->clock;
+ for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
+ if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+ target_clock = intel_edp_target_clock(intel_encoder,
+ mode);
+ break;
+ }
+ }
+
/*
* Compute the GMCH and Link ratios. The '3' here is
* the number of bytes_per_pixel post-LUT, which we always
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
intel_link_compute_m_n(intel_crtc->bpp, lane_count,
- mode->clock, adjusted_mode->clock, &m_n);
+ target_clock, adjusted_mode->clock, &m_n);
if (IS_HASWELL(dev)) {
I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
--
1.8.2
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()
2013-03-18 9:29 ` Takashi Iwai
@ 2013-03-18 10:26 ` Daniel Vetter
0 siblings, 0 replies; 7+ messages in thread
From: Daniel Vetter @ 2013-03-18 10:26 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Daniel Vetter, Daniel Vetter, intel-gfx, linux-kernel
On Mon, Mar 18, 2013 at 10:29:16AM +0100, Takashi Iwai wrote:
> At Sun, 17 Mar 2013 23:12:03 +0100,
> Daniel Vetter wrote:
> >
> > On Tue, Mar 12, 2013 at 04:32:28PM +0100, Takashi Iwai wrote:
> > > The eDP output on HP Z1 is still broken when X is started even after
> > > fixing the infinite link-train loop. The regression was introduced in
> > > 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c.
> > >
> > > In the past, the clock of the reference mode was modified in
> > > intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was
> > > used for calculating in intel_dp_set_m_n(). This override was removed,
> > > thus the wrong mode clock is used for the calculation, resulting in a
> > > psychedelic smoking output in the end.
> > >
> > > This patch corrects the clock to be used in the place.
> > >
> > > Cc: <stable@vger.kernel.org>
> > > Signed-off-by: Takashi Iwai <tiwai@suse.de>
> >
> > I truly hate this mess of dotclock vs portclock vs. whatever. Can you pls
> > apply a little bikeshed and use the existing intel_edp_target_clock like
> > in ironlake_set_m_n? And if you have the regressing commit a little
> > citation to assign the blame (it's probably me) would be good.
>
> OK, the revised patch is below.
Picked up for -fixes, thanks for the patch.
-Daniel
>
>
> thanks,
>
> Takashi
>
> ---
> From: Takashi Iwai <tiwai@suse.de>
> Subject: [PATCH v2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()
>
> The eDP output on HP Z1 is still broken when X is started even after
> fixing the infinite link-train loop. The regression was introduced in
> 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c
> by the commit [71244653: drm/i915: adjusted_mode->clock in the dp
> mode_fix].
>
> In the past, the clock of the reference mode was modified in
> intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was
> used for calculating in intel_dp_set_m_n(). This override was removed,
> thus the wrong mode clock is used for the calculation, resulting in a
> psychedelic smoking output in the end.
>
> This patch corrects the clock to be used in the place.
>
> v1->v2: Use intel_edp_target_clock() for checking eDP fixed clock
> instead of open code as in ironlake_set_m_n().
>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 6f728e5..2606811 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -820,6 +820,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
> struct intel_link_m_n m_n;
> int pipe = intel_crtc->pipe;
> enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
> + int target_clock;
>
> /*
> * Find the lane count in the intel_encoder private
> @@ -835,13 +836,22 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
> }
> }
>
> + target_clock = mode->clock;
> + for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
> + if (intel_encoder->type == INTEL_OUTPUT_EDP) {
> + target_clock = intel_edp_target_clock(intel_encoder,
> + mode);
> + break;
> + }
> + }
> +
> /*
> * Compute the GMCH and Link ratios. The '3' here is
> * the number of bytes_per_pixel post-LUT, which we always
> * set up for 8-bits of R/G/B, or 3 bytes total.
> */
> intel_link_compute_m_n(intel_crtc->bpp, lane_count,
> - mode->clock, adjusted_mode->clock, &m_n);
> + target_clock, adjusted_mode->clock, &m_n);
>
> if (IS_HASWELL(dev)) {
> I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
> --
> 1.8.2
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()
@ 2013-03-18 10:26 ` Daniel Vetter
0 siblings, 0 replies; 7+ messages in thread
From: Daniel Vetter @ 2013-03-18 10:26 UTC (permalink / raw)
To: Takashi Iwai; +Cc: Daniel Vetter, intel-gfx, linux-kernel
On Mon, Mar 18, 2013 at 10:29:16AM +0100, Takashi Iwai wrote:
> At Sun, 17 Mar 2013 23:12:03 +0100,
> Daniel Vetter wrote:
> >
> > On Tue, Mar 12, 2013 at 04:32:28PM +0100, Takashi Iwai wrote:
> > > The eDP output on HP Z1 is still broken when X is started even after
> > > fixing the infinite link-train loop. The regression was introduced in
> > > 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c.
> > >
> > > In the past, the clock of the reference mode was modified in
> > > intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was
> > > used for calculating in intel_dp_set_m_n(). This override was removed,
> > > thus the wrong mode clock is used for the calculation, resulting in a
> > > psychedelic smoking output in the end.
> > >
> > > This patch corrects the clock to be used in the place.
> > >
> > > Cc: <stable@vger.kernel.org>
> > > Signed-off-by: Takashi Iwai <tiwai@suse.de>
> >
> > I truly hate this mess of dotclock vs portclock vs. whatever. Can you pls
> > apply a little bikeshed and use the existing intel_edp_target_clock like
> > in ironlake_set_m_n? And if you have the regressing commit a little
> > citation to assign the blame (it's probably me) would be good.
>
> OK, the revised patch is below.
Picked up for -fixes, thanks for the patch.
-Daniel
>
>
> thanks,
>
> Takashi
>
> ---
> From: Takashi Iwai <tiwai@suse.de>
> Subject: [PATCH v2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()
>
> The eDP output on HP Z1 is still broken when X is started even after
> fixing the infinite link-train loop. The regression was introduced in
> 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c
> by the commit [71244653: drm/i915: adjusted_mode->clock in the dp
> mode_fix].
>
> In the past, the clock of the reference mode was modified in
> intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was
> used for calculating in intel_dp_set_m_n(). This override was removed,
> thus the wrong mode clock is used for the calculation, resulting in a
> psychedelic smoking output in the end.
>
> This patch corrects the clock to be used in the place.
>
> v1->v2: Use intel_edp_target_clock() for checking eDP fixed clock
> instead of open code as in ironlake_set_m_n().
>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 12 +++++++++++-
> 1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 6f728e5..2606811 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -820,6 +820,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
> struct intel_link_m_n m_n;
> int pipe = intel_crtc->pipe;
> enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
> + int target_clock;
>
> /*
> * Find the lane count in the intel_encoder private
> @@ -835,13 +836,22 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
> }
> }
>
> + target_clock = mode->clock;
> + for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
> + if (intel_encoder->type == INTEL_OUTPUT_EDP) {
> + target_clock = intel_edp_target_clock(intel_encoder,
> + mode);
> + break;
> + }
> + }
> +
> /*
> * Compute the GMCH and Link ratios. The '3' here is
> * the number of bytes_per_pixel post-LUT, which we always
> * set up for 8-bits of R/G/B, or 3 bytes total.
> */
> intel_link_compute_m_n(intel_crtc->bpp, lane_count,
> - mode->clock, adjusted_mode->clock, &m_n);
> + target_clock, adjusted_mode->clock, &m_n);
>
> if (IS_HASWELL(dev)) {
> I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
> --
> 1.8.2
>
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-03-18 10:23 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-12 15:32 [PATCH 0/2] Fix eDP breakages on HP Z1 desktop Takashi Iwai
2013-03-12 15:32 ` [PATCH 1/2] Revert "drm/i915: try to train DP even harder" Takashi Iwai
2013-03-12 15:32 ` [PATCH 2/2] drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n() Takashi Iwai
2013-03-17 22:12 ` Daniel Vetter
2013-03-18 9:29 ` Takashi Iwai
2013-03-18 10:26 ` Daniel Vetter
2013-03-18 10:26 ` Daniel Vetter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.