From: Maxime Ripard <maxime.ripard@free-electrons.com> To: linux-arm-kernel@lists.infradead.org Cc: kevin@allwinnertech.com, sunny@allwinnertech.com, shuge@allwinnertech.com, Russell King <linux@arm.linux.org.uk>, linux-kernel@vger.kernel.org Subject: [PATCH 5/6] ARM: sunxi: dt: Add A10 UARTs to the dtsi. Date: Fri, 15 Mar 2013 21:06:27 +0100 [thread overview] Message-ID: <1363377988-4966-6-git-send-email-maxime.ripard@free-electrons.com> (raw) In-Reply-To: <1363377988-4966-1-git-send-email-maxime.ripard@free-electrons.com> The Allwinner A10 SoC has 8 available UARTs, which is 6 more than on the A13, so add the missing UARTs to the sun4i-a10 dtsi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Emilio López <emilio@elopez.com.ar> --- arch/arm/boot/dts/sun4i-a10.dtsi | 51 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 703e7cb..0142ca0 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -57,5 +57,56 @@ clocks = <&osc>; status = "disabled"; }; + + uart2: uart@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + + uart4: uart@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <17>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart5: uart@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <18>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart6: uart@01c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = <19>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart7: uart@01c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = <20>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; }; }; -- 1.7.10.4
WARNING: multiple messages have this Message-ID (diff)
From: maxime.ripard@free-electrons.com (Maxime Ripard) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/6] ARM: sunxi: dt: Add A10 UARTs to the dtsi. Date: Fri, 15 Mar 2013 21:06:27 +0100 [thread overview] Message-ID: <1363377988-4966-6-git-send-email-maxime.ripard@free-electrons.com> (raw) In-Reply-To: <1363377988-4966-1-git-send-email-maxime.ripard@free-electrons.com> The Allwinner A10 SoC has 8 available UARTs, which is 6 more than on the A13, so add the missing UARTs to the sun4i-a10 dtsi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Emilio L?pez <emilio@elopez.com.ar> --- arch/arm/boot/dts/sun4i-a10.dtsi | 51 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 703e7cb..0142ca0 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -57,5 +57,56 @@ clocks = <&osc>; status = "disabled"; }; + + uart2: uart at 01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <3>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + + uart4: uart at 01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <17>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart5: uart at 01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <18>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart6: uart at 01c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = <19>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; + + uart7: uart at 01c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = <20>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&osc>; + status = "disabled"; + }; }; }; -- 1.7.10.4
next prev parent reply other threads:[~2013-03-15 20:06 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-03-15 20:06 [PATCHv3 0/6] Extend UART support for Allwinner SoCs Maxime Ripard 2013-03-15 20:06 ` [PATCH 1/6] serial: 8250_dw: add support for clk api Maxime Ripard 2013-03-15 20:06 ` Maxime Ripard 2013-03-15 20:06 ` Maxime Ripard 2013-03-15 22:39 ` Russell King - ARM Linux 2013-03-15 22:39 ` Russell King - ARM Linux 2013-03-16 0:15 ` Emilio López 2013-03-16 0:15 ` Emilio López 2013-03-16 0:29 ` Russell King - ARM Linux 2013-03-16 0:29 ` Russell King - ARM Linux 2013-03-16 0:29 ` Russell King - ARM Linux 2013-03-16 0:40 ` Emilio López 2013-03-16 0:40 ` Emilio López 2013-03-16 0:40 ` Emilio López 2013-03-15 20:06 ` [PATCH 2/6] ARM: sunxi: dt: Use clocks property instead of clock-frequency for the UARTs Maxime Ripard 2013-03-15 20:06 ` Maxime Ripard 2013-03-15 20:06 ` [PATCH 3/6] ARM: sunxi: dt: Move uart0 to sun4i-a10.dtsi Maxime Ripard 2013-03-15 20:06 ` Maxime Ripard 2013-03-15 20:06 ` [PATCH 4/6] ARM: sunxi: dt: Add uart3 dt node Maxime Ripard 2013-03-15 20:06 ` Maxime Ripard 2013-03-15 22:01 ` Sergei Shtylyov 2013-03-15 22:01 ` Sergei Shtylyov 2013-03-15 20:06 ` Maxime Ripard [this message] 2013-03-15 20:06 ` [PATCH 5/6] ARM: sunxi: dt: Add A10 UARTs to the dtsi Maxime Ripard 2013-03-15 20:06 ` [PATCH 6/6] ARM: sunxi: hackberry: Add UART muxing Maxime Ripard 2013-03-15 20:06 ` Maxime Ripard -- strict thread matches above, loose matches on Subject: below -- 2013-03-07 22:14 [PATCHv2 0/6] Extend UART support for Allwinner SoCs Maxime Ripard 2013-03-07 22:14 ` [PATCH 5/6] ARM: sunxi: dt: Add A10 UARTs to the dtsi Maxime Ripard 2013-03-07 22:14 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1363377988-4966-6-git-send-email-maxime.ripard@free-electrons.com \ --to=maxime.ripard@free-electrons.com \ --cc=kevin@allwinnertech.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=shuge@allwinnertech.com \ --cc=sunny@allwinnertech.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.