[PATCH] Doc: dt: i2c: tegra: add dt binding for i2c-tegra

[PATCH] Doc: dt: i2c: tegra: add dt binding for i2c-tegra

[Laxman Dewangan]

Add documentation for device tree binding of NVIDIA's Tegra i2c
controller driver.

Describing all compatible values used for diffenent Tegra SoCs
in details in this documentation.

Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 .../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt |   99 ++++++++++++++++++++
 1 files changed, 99 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt

diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
new file mode 100644
index 0000000..e390ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -0,0 +1,99 @@
+NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
+
+Required properties:
+- compatible : should be:
+	"nvidia,tegra114-i2c"
+	"nvidia,tegra30-i2c"
+	"nvidia,tegra20-i2c"
+	"nvidia,tegra20-i2c-dvc"
+
+ Details of compatible are as follows:
+  nvidia,tegra20-i2c-dvc: Tegra20 has specific i2c controller called as DVC I2C
+	controller. This only support master mode of I2C communication. Register
+	interface/offset and interrupts handling are different than generic I2C
+	controller. Driver of DVC I2C controller is only compatible with
+	"nvidia,tegra20-i2c-dvc".
+  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
+	master and slave mode of I2C communication. The i2c-tegra driver only
+	support master mode of I2C communication. Driver of I2C controller is
+	only compatible with "nvidia,tegra20-i2c".
+  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
+	very much similar to Tegra20 I2C controller with additional feature:
+	Continue Transfer Support. This feature helps to implement M_NO_START
+	as per I2C core API transfer flags. Driver of I2C controller is
+	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
+	support. This is also compatible with "nvidia,tegra20-i2c" without
+	continue transfer support.
+  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
+	very much similar to Tegra30 I2C controller with some hardware
+	modification:
+	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
+	   fast-clk. Tegra114 has only one clock source called as div-clk and
+	   hence clock mechanism is changed in I2C controller.
+	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
+	   default and there is no way to disable it. Tegra114 has this
+	   interrupt disable by default and SW need to enable explicitly.
+	Due to above changes, Tegra114 I2C driver makes incompatible with
+	previous hardware driver. Hence, tegra114 I2C controller is compatible
+	with "nvidia,tegra114-i2c".
+
+
+- reg: Should contain I2C controller registers physical address and length.
+- interrupts: Should contain I2C controller interrupts.
+- address-cells: Address cells for I2C device address.
+- size-cells: Size of the I2C device address.
+- clocks: Clock Id as per
+		Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
+	for I2C controller.
+- clock-names: Name of the clock:
+	Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
+	Tegra114 I2C controller: "div-clk".
+
+
+Typical i2c node for Tegra20:
+	i2c@7000c000 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 12>, <&tegra_car 124>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
+	};
+
+Typical dvc-i2c node for Tegra20:
+	i2c@7000d000 {
+		compatible = "nvidia,tegra20-i2c-dvc";
+		reg = <0x7000d000 0x200>;
+		interrupts = <0 53 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 47>, <&tegra_car 124>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
+	};
+
+Typical i2c node for Tegra30:
+	i2c@7000c000 {
+		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 12>, <&tegra_car 182>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
+	};
+
+Typical i2c node for Tegra114:
+	i2c@7000c000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		clocks = <&tegra_car 12>;
+		clock-names = "div-clk";
+	};
-- 
1.7.1.1

[PATCH] Doc: dt: i2c: tegra: add dt binding for i2c-tegra

[Laxman Dewangan]

Add documentation for device tree binding of NVIDIA's Tegra i2c
controller driver.

Describing all compatible values used for diffenent Tegra SoCs
in details in this documentation.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
 .../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt |   99 ++++++++++++++++++++
 1 files changed, 99 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt

diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
new file mode 100644
index 0000000..e390ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -0,0 +1,99 @@
+NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
+
+Required properties:
+- compatible : should be:
+	"nvidia,tegra114-i2c"
+	"nvidia,tegra30-i2c"
+	"nvidia,tegra20-i2c"
+	"nvidia,tegra20-i2c-dvc"
+
+ Details of compatible are as follows:
+  nvidia,tegra20-i2c-dvc: Tegra20 has specific i2c controller called as DVC I2C
+	controller. This only support master mode of I2C communication. Register
+	interface/offset and interrupts handling are different than generic I2C
+	controller. Driver of DVC I2C controller is only compatible with
+	"nvidia,tegra20-i2c-dvc".
+  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
+	master and slave mode of I2C communication. The i2c-tegra driver only
+	support master mode of I2C communication. Driver of I2C controller is
+	only compatible with "nvidia,tegra20-i2c".
+  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
+	very much similar to Tegra20 I2C controller with additional feature:
+	Continue Transfer Support. This feature helps to implement M_NO_START
+	as per I2C core API transfer flags. Driver of I2C controller is
+	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
+	support. This is also compatible with "nvidia,tegra20-i2c" without
+	continue transfer support.
+  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
+	very much similar to Tegra30 I2C controller with some hardware
+	modification:
+	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
+	   fast-clk. Tegra114 has only one clock source called as div-clk and
+	   hence clock mechanism is changed in I2C controller.
+	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
+	   default and there is no way to disable it. Tegra114 has this
+	   interrupt disable by default and SW need to enable explicitly.
+	Due to above changes, Tegra114 I2C driver makes incompatible with
+	previous hardware driver. Hence, tegra114 I2C controller is compatible
+	with "nvidia,tegra114-i2c".
+
+
+- reg: Should contain I2C controller registers physical address and length.
+- interrupts: Should contain I2C controller interrupts.
+- address-cells: Address cells for I2C device address.
+- size-cells: Size of the I2C device address.
+- clocks: Clock Id as per
+		Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
+	for I2C controller.
+- clock-names: Name of the clock:
+	Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
+	Tegra114 I2C controller: "div-clk".
+
+
+Typical i2c node for Tegra20:
+	i2c@7000c000 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 12>, <&tegra_car 124>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
+	};
+
+Typical dvc-i2c node for Tegra20:
+	i2c@7000d000 {
+		compatible = "nvidia,tegra20-i2c-dvc";
+		reg = <0x7000d000 0x200>;
+		interrupts = <0 53 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 47>, <&tegra_car 124>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
+	};
+
+Typical i2c node for Tegra30:
+	i2c@7000c000 {
+		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car 12>, <&tegra_car 182>;
+		clock-names = "div-clk", "fast-clk";
+		status = "disabled";
+	};
+
+Typical i2c node for Tegra114:
+	i2c@7000c000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <0 38 0x04>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		clocks = <&tegra_car 12>;
+		clock-names = "div-clk";
+	};
-- 
1.7.1.1

Re: [PATCH] Doc: dt: i2c: tegra: add dt binding for i2c-tegra

[Stephen Warren]

On 03/18/2013 03:35 AM, Laxman Dewangan wrote:
> Add documentation for device tree binding of NVIDIA's Tegra i2c
> controller driver.
> 
> Describing all compatible values used for diffenent Tegra SoCs
> in details in this documentation.

I have applied this to Tegra's for-3.10/dt branch. I fixed a couple of
typos and capitalization errors. I also trimmed the patch to include
only a single example; the description in the text is enough to get the
rest right, so there's no need to include exhaustive examples.

Re: [PATCH] Doc: dt: i2c: tegra: add dt binding for i2c-tegra

[Grant Likely]

On Mon, 18 Mar 2013 15:05:50 +0530, Laxman Dewangan <ldewangan@nvidia.com> wrote:
> Add documentation for device tree binding of NVIDIA's Tegra i2c
> controller driver.
> 
> Describing all compatible values used for diffenent Tegra SoCs
> in details in this documentation.
> 
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>

Looks fine by me

Acked-by: Grant Likely <grant.likely@secretlab.ca>

Should be merged with the driver series.

g.

> ---
>  .../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt |   99 ++++++++++++++++++++
>  1 files changed, 99 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
> new file mode 100644
> index 0000000..e390ce8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
> @@ -0,0 +1,99 @@
> +NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
> +
> +Required properties:
> +- compatible : should be:
> +	"nvidia,tegra114-i2c"
> +	"nvidia,tegra30-i2c"
> +	"nvidia,tegra20-i2c"
> +	"nvidia,tegra20-i2c-dvc"
> +
> + Details of compatible are as follows:
> +  nvidia,tegra20-i2c-dvc: Tegra20 has specific i2c controller called as DVC I2C
> +	controller. This only support master mode of I2C communication. Register
> +	interface/offset and interrupts handling are different than generic I2C
> +	controller. Driver of DVC I2C controller is only compatible with
> +	"nvidia,tegra20-i2c-dvc".
> +  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
> +	master and slave mode of I2C communication. The i2c-tegra driver only
> +	support master mode of I2C communication. Driver of I2C controller is
> +	only compatible with "nvidia,tegra20-i2c".
> +  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
> +	very much similar to Tegra20 I2C controller with additional feature:
> +	Continue Transfer Support. This feature helps to implement M_NO_START
> +	as per I2C core API transfer flags. Driver of I2C controller is
> +	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
> +	support. This is also compatible with "nvidia,tegra20-i2c" without
> +	continue transfer support.
> +  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
> +	very much similar to Tegra30 I2C controller with some hardware
> +	modification:
> +	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
> +	   fast-clk. Tegra114 has only one clock source called as div-clk and
> +	   hence clock mechanism is changed in I2C controller.
> +	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
> +	   default and there is no way to disable it. Tegra114 has this
> +	   interrupt disable by default and SW need to enable explicitly.
> +	Due to above changes, Tegra114 I2C driver makes incompatible with
> +	previous hardware driver. Hence, tegra114 I2C controller is compatible
> +	with "nvidia,tegra114-i2c".
> +
> +
> +- reg: Should contain I2C controller registers physical address and length.
> +- interrupts: Should contain I2C controller interrupts.
> +- address-cells: Address cells for I2C device address.
> +- size-cells: Size of the I2C device address.
> +- clocks: Clock Id as per
> +		Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
> +	for I2C controller.
> +- clock-names: Name of the clock:
> +	Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
> +	Tegra114 I2C controller: "div-clk".
> +
> +
> +Typical i2c node for Tegra20:
> +	i2c@7000c000 {
> +		compatible = "nvidia,tegra20-i2c";
> +		reg = <0x7000c000 0x100>;
> +		interrupts = <0 38 0x04>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		clocks = <&tegra_car 12>, <&tegra_car 124>;
> +		clock-names = "div-clk", "fast-clk";
> +		status = "disabled";
> +	};
> +
> +Typical dvc-i2c node for Tegra20:
> +	i2c@7000d000 {
> +		compatible = "nvidia,tegra20-i2c-dvc";
> +		reg = <0x7000d000 0x200>;
> +		interrupts = <0 53 0x04>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		clocks = <&tegra_car 47>, <&tegra_car 124>;
> +		clock-names = "div-clk", "fast-clk";
> +		status = "disabled";
> +	};
> +
> +Typical i2c node for Tegra30:
> +	i2c@7000c000 {
> +		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
> +		reg = <0x7000c000 0x100>;
> +		interrupts = <0 38 0x04>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		clocks = <&tegra_car 12>, <&tegra_car 182>;
> +		clock-names = "div-clk", "fast-clk";
> +		status = "disabled";
> +	};
> +
> +Typical i2c node for Tegra114:
> +	i2c@7000c000 {
> +		compatible = "nvidia,tegra114-i2c";
> +		reg = <0x7000c000 0x100>;
> +		interrupts = <0 38 0x04>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +		clocks = <&tegra_car 12>;
> +		clock-names = "div-clk";
> +	};
> -- 
> 1.7.1.1
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.

Re: [PATCH] Doc: dt: i2c: tegra: add dt binding for i2c-tegra

[Grant Likely]

On Mon, 18 Mar 2013 15:05:50 +0530, Laxman Dewangan <ldewangan@nvidia.com> wrote:
> Add documentation for device tree binding of NVIDIA's Tegra i2c
> controller driver.
> 
> Describing all compatible values used for diffenent Tegra SoCs
> in details in this documentation.
> 
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>

Looks fine by me

Acked-by: Grant Likely <grant.likely@secretlab.ca>

Should be merged with the driver series.

g.

> ---
>  .../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt |   99 ++++++++++++++++++++
>  1 files changed, 99 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
> new file mode 100644
> index 0000000..e390ce8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
> @@ -0,0 +1,99 @@
> +NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
> +
> +Required properties:
> +- compatible : should be:
> +	"nvidia,tegra114-i2c"
> +	"nvidia,tegra30-i2c"
> +	"nvidia,tegra20-i2c"
> +	"nvidia,tegra20-i2c-dvc"
> +
> + Details of compatible are as follows:
> +  nvidia,tegra20-i2c-dvc: Tegra20 has specific i2c controller called as DVC I2C
> +	controller. This only support master mode of I2C communication. Register
> +	interface/offset and interrupts handling are different than generic I2C
> +	controller. Driver of DVC I2C controller is only compatible with
> +	"nvidia,tegra20-i2c-dvc".
> +  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
> +	master and slave mode of I2C communication. The i2c-tegra driver only
> +	support master mode of I2C communication. Driver of I2C controller is
> +	only compatible with "nvidia,tegra20-i2c".
> +  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
> +	very much similar to Tegra20 I2C controller with additional feature:
> +	Continue Transfer Support. This feature helps to implement M_NO_START
> +	as per I2C core API transfer flags. Driver of I2C controller is
> +	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
> +	support. This is also compatible with "nvidia,tegra20-i2c" without
> +	continue transfer support.
> +  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
> +	very much similar to Tegra30 I2C controller with some hardware
> +	modification:
> +	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
> +	   fast-clk. Tegra114 has only one clock source called as div-clk and
> +	   hence clock mechanism is changed in I2C controller.
> +	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
> +	   default and there is no way to disable it. Tegra114 has this
> +	   interrupt disable by default and SW need to enable explicitly.
> +	Due to above changes, Tegra114 I2C driver makes incompatible with
> +	previous hardware driver. Hence, tegra114 I2C controller is compatible
> +	with "nvidia,tegra114-i2c".
> +
> +
> +- reg: Should contain I2C controller registers physical address and length.
> +- interrupts: Should contain I2C controller interrupts.
> +- address-cells: Address cells for I2C device address.
> +- size-cells: Size of the I2C device address.
> +- clocks: Clock Id as per
> +		Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
> +	for I2C controller.
> +- clock-names: Name of the clock:
> +	Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
> +	Tegra114 I2C controller: "div-clk".
> +
> +
> +Typical i2c node for Tegra20:
> +	i2c@7000c000 {
> +		compatible = "nvidia,tegra20-i2c";
> +		reg = <0x7000c000 0x100>;
> +		interrupts = <0 38 0x04>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		clocks = <&tegra_car 12>, <&tegra_car 124>;
> +		clock-names = "div-clk", "fast-clk";
> +		status = "disabled";
> +	};
> +
> +Typical dvc-i2c node for Tegra20:
> +	i2c@7000d000 {
> +		compatible = "nvidia,tegra20-i2c-dvc";
> +		reg = <0x7000d000 0x200>;
> +		interrupts = <0 53 0x04>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		clocks = <&tegra_car 47>, <&tegra_car 124>;
> +		clock-names = "div-clk", "fast-clk";
> +		status = "disabled";
> +	};
> +
> +Typical i2c node for Tegra30:
> +	i2c@7000c000 {
> +		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
> +		reg = <0x7000c000 0x100>;
> +		interrupts = <0 38 0x04>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		clocks = <&tegra_car 12>, <&tegra_car 182>;
> +		clock-names = "div-clk", "fast-clk";
> +		status = "disabled";
> +	};
> +
> +Typical i2c node for Tegra114:
> +	i2c@7000c000 {
> +		compatible = "nvidia,tegra114-i2c";
> +		reg = <0x7000c000 0x100>;
> +		interrupts = <0 38 0x04>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +		clocks = <&tegra_car 12>;
> +		clock-names = "div-clk";
> +	};
> -- 
> 1.7.1.1
> 

-- 
Grant Likely, B.Sc, P.Eng.
Secret Lab Technologies, Ltd.