* CONFIG_EARLY_PRINTK
@ 2013-03-13 17:15 Thomas Meyer
2013-03-13 19:56 ` CONFIG_EARLY_PRINTK Randy Dunlap
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Meyer @ 2013-03-13 17:15 UTC (permalink / raw)
To: Linux Kernel Mailing List
Hi,
-*- Early printk
help text says:
"You should normally N here, unless you want to debug such a crash.
(Depends on: EXPERT [=n])"
How to normally N here?
kind regards
thomas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: CONFIG_EARLY_PRINTK
2013-03-13 17:15 CONFIG_EARLY_PRINTK Thomas Meyer
@ 2013-03-13 19:56 ` Randy Dunlap
2013-03-16 15:08 ` CONFIG_EARLY_PRINTK Thomas Meyer
0 siblings, 1 reply; 7+ messages in thread
From: Randy Dunlap @ 2013-03-13 19:56 UTC (permalink / raw)
To: Thomas Meyer; +Cc: Linux Kernel Mailing List
On 03/13/13 10:15, Thomas Meyer wrote:
> Hi,
>
> -*- Early printk
>
> help text says:
> "You should normally N here, unless you want to debug such a crash.
> (Depends on: EXPERT [=n])"
>
> How to normally N here?
You'll have to enable CONFIG_EXPERT and then you can disable EARLY_PRINTK.
You may even have to disable CONFIG_EMBEDDED before you can enable
CONFIG_EXPERT (I did).
Too many hoops to have to jump through. :(
--
~Randy
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: CONFIG_EARLY_PRINTK
2013-03-13 19:56 ` CONFIG_EARLY_PRINTK Randy Dunlap
@ 2013-03-16 15:08 ` Thomas Meyer
2013-03-16 17:38 ` CONFIG_EARLY_PRINTK Randy Dunlap
0 siblings, 1 reply; 7+ messages in thread
From: Thomas Meyer @ 2013-03-16 15:08 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Linux Kernel Mailing List
Am Mittwoch, den 13.03.2013, 12:56 -0700 schrieb Randy Dunlap:
> On 03/13/13 10:15, Thomas Meyer wrote:
> > Hi,
> >
> > -*- Early printk
> >
> > help text says:
> > "You should normally N here, unless you want to debug such a crash.
> > (Depends on: EXPERT [=n])"
> >
> > How to normally N here?
>
> You'll have to enable CONFIG_EXPERT and then you can disable EARLY_PRINTK.
>
> You may even have to disable CONFIG_EMBEDDED before you can enable
> CONFIG_EXPERT (I did).
>
> Too many hoops to have to jump through. :(
>
Yes,
so why not do this? As the text to EARLY_PRINTK explains?
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index b322f12..d6c2d89 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -32,7 +32,7 @@ config X86_VERBOSE_BOOTUP
config EARLY_PRINTK
bool "Early printk" if EXPERT
- default y
+ default n
---help---
Write kernel log output directly into the VGA buffer or to a
serial
port.
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: CONFIG_EARLY_PRINTK
2013-03-16 15:08 ` CONFIG_EARLY_PRINTK Thomas Meyer
@ 2013-03-16 17:38 ` Randy Dunlap
2013-03-16 20:10 ` CONFIG_EARLY_PRINTK Geert Uytterhoeven
2013-03-22 14:07 ` CONFIG_EARLY_PRINTK Thomas Meyer
0 siblings, 2 replies; 7+ messages in thread
From: Randy Dunlap @ 2013-03-16 17:38 UTC (permalink / raw)
To: Thomas Meyer; +Cc: Linux Kernel Mailing List, x86
On 03/16/13 08:08, Thomas Meyer wrote:
> Am Mittwoch, den 13.03.2013, 12:56 -0700 schrieb Randy Dunlap:
>> On 03/13/13 10:15, Thomas Meyer wrote:
>>> Hi,
>>>
>>> -*- Early printk
>>>
>>> help text says:
>>> "You should normally N here, unless you want to debug such a crash.
>>> (Depends on: EXPERT [=n])"
>>>
>>> How to normally N here?
>>
>> You'll have to enable CONFIG_EXPERT and then you can disable EARLY_PRINTK.
>>
>> You may even have to disable CONFIG_EMBEDDED before you can enable
>> CONFIG_EXPERT (I did).
>>
>> Too many hoops to have to jump through. :(
>>
>
> Yes,
>
> so why not do this? As the text to EARLY_PRINTK explains?
Yes, the default should match the help text.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Please resend your patch with Signed-off-by: line.
Thanks.
>
> diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
> index b322f12..d6c2d89 100644
> --- a/arch/x86/Kconfig.debug
> +++ b/arch/x86/Kconfig.debug
> @@ -32,7 +32,7 @@ config X86_VERBOSE_BOOTUP
>
> config EARLY_PRINTK
> bool "Early printk" if EXPERT
> - default y
> + default n
> ---help---
> Write kernel log output directly into the VGA buffer or to a
> serial
> port.
>
>
>
--
~Randy
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: CONFIG_EARLY_PRINTK
2013-03-16 17:38 ` CONFIG_EARLY_PRINTK Randy Dunlap
@ 2013-03-16 20:10 ` Geert Uytterhoeven
2013-03-22 14:07 ` CONFIG_EARLY_PRINTK Thomas Meyer
1 sibling, 0 replies; 7+ messages in thread
From: Geert Uytterhoeven @ 2013-03-16 20:10 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Thomas Meyer, Linux Kernel Mailing List, x86
On Sat, Mar 16, 2013 at 6:38 PM, Randy Dunlap <rdunlap@infradead.org> wrote:
> On 03/16/13 08:08, Thomas Meyer wrote:
>> Am Mittwoch, den 13.03.2013, 12:56 -0700 schrieb Randy Dunlap:
>>> On 03/13/13 10:15, Thomas Meyer wrote:
>>>> help text says:
>>>> "You should normally N here, unless you want to debug such a crash.
>>>> (Depends on: EXPERT [=n])"
>>>>
>>>> How to normally N here?
>> so why not do this? As the text to EARLY_PRINTK explains?
>
> Yes, the default should match the help text.
So just remove the "default n" line, as "n" is the default.
> Acked-by: Randy Dunlap <rdunlap@infradead.org>
>
> Please resend your patch with Signed-off-by: line.
>
> Thanks.
>
>>
>> diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
>> index b322f12..d6c2d89 100644
>> --- a/arch/x86/Kconfig.debug
>> +++ b/arch/x86/Kconfig.debug
>> @@ -32,7 +32,7 @@ config X86_VERBOSE_BOOTUP
>>
>> config EARLY_PRINTK
>> bool "Early printk" if EXPERT
>> - default y
>> + default n
>> ---help---
>> Write kernel log output directly into the VGA buffer or to a
>> serial
>> port.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: CONFIG_EARLY_PRINTK
2013-03-16 17:38 ` CONFIG_EARLY_PRINTK Randy Dunlap
2013-03-16 20:10 ` CONFIG_EARLY_PRINTK Geert Uytterhoeven
@ 2013-03-22 14:07 ` Thomas Meyer
2013-03-25 23:23 ` CONFIG_EARLY_PRINTK Randy Dunlap
1 sibling, 1 reply; 7+ messages in thread
From: Thomas Meyer @ 2013-03-22 14:07 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Linux Kernel Mailing List, x86
Am Samstag, den 16.03.2013, 10:38 -0700 schrieb Randy Dunlap:
> On 03/16/13 08:08, Thomas Meyer wrote:
> > Am Mittwoch, den 13.03.2013, 12:56 -0700 schrieb Randy Dunlap:
> > Yes,
> >
> > so why not do this? As the text to EARLY_PRINTK explains?
>
> Yes, the default should match the help text.
> Acked-by: Randy Dunlap <rdunlap@infradead.org>
>
> Please resend your patch with Signed-off-by: line.
>
> Thanks.
Align EARLY_PRINTK default value with help text value.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
---
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index b322f12..852d51c 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -32,7 +32,6 @@ config X86_VERBOSE_BOOTUP
config EARLY_PRINTK
bool "Early printk" if EXPERT
- default y
---help---
Write kernel log output directly into the VGA buffer or to a serial
port.
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: CONFIG_EARLY_PRINTK
2013-03-22 14:07 ` CONFIG_EARLY_PRINTK Thomas Meyer
@ 2013-03-25 23:23 ` Randy Dunlap
0 siblings, 0 replies; 7+ messages in thread
From: Randy Dunlap @ 2013-03-25 23:23 UTC (permalink / raw)
To: Thomas Meyer; +Cc: Linux Kernel Mailing List, x86
On 03/22/13 07:07, Thomas Meyer wrote:
> Am Samstag, den 16.03.2013, 10:38 -0700 schrieb Randy Dunlap:
>> On 03/16/13 08:08, Thomas Meyer wrote:
>>> Am Mittwoch, den 13.03.2013, 12:56 -0700 schrieb Randy Dunlap:
>>> Yes,
>>>
>>> so why not do this? As the text to EARLY_PRINTK explains?
>>
>> Yes, the default should match the help text.
>> Acked-by: Randy Dunlap <rdunlap@infradead.org>
>>
>> Please resend your patch with Signed-off-by: line.
>>
>> Thanks.
>
> Align EARLY_PRINTK default value with help text value.
>
> Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Thanks.
tip??
> ---
>
> diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
> index b322f12..852d51c 100644
> --- a/arch/x86/Kconfig.debug
> +++ b/arch/x86/Kconfig.debug
> @@ -32,7 +32,6 @@ config X86_VERBOSE_BOOTUP
>
> config EARLY_PRINTK
> bool "Early printk" if EXPERT
> - default y
> ---help---
> Write kernel log output directly into the VGA buffer or to a serial
> port.
>
>
> --
--
~Randy
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-03-26 0:23 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-13 17:15 CONFIG_EARLY_PRINTK Thomas Meyer
2013-03-13 19:56 ` CONFIG_EARLY_PRINTK Randy Dunlap
2013-03-16 15:08 ` CONFIG_EARLY_PRINTK Thomas Meyer
2013-03-16 17:38 ` CONFIG_EARLY_PRINTK Randy Dunlap
2013-03-16 20:10 ` CONFIG_EARLY_PRINTK Geert Uytterhoeven
2013-03-22 14:07 ` CONFIG_EARLY_PRINTK Thomas Meyer
2013-03-25 23:23 ` CONFIG_EARLY_PRINTK Randy Dunlap
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.