[PATCH 0/5] video: vt8500 patches for 3.10

[PATCH 0/5] video: vt8500 patches for 3.10

[Tony Prisk]

Hi Florian,

These patches were posted for 3.9, but I didn't recieve any reply back at the
time. Reposting for 3.10 - based on 3.9-rc2

Regards
Tony P

Julia Lawall (1):
  drivers/video/wm8505fb.c: use devm_ functions

Tony Prisk (4):
  video: vt8500: Make wmt_ge_rops optional
  video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h
  video: vt8500: Correct descriptions in video/Kconfig
  video: vt8500: Adjust contrast in wm8505 framebuffer driver.

 drivers/video/Kconfig                           |   31 ++++----
 drivers/video/vt8500lcdfb.c                     |   17 +++-
 drivers/video/wm8505fb.c                        |   96 ++++++++---------------
 include/linux/platform_data/video-vt8500lcdfb.h |   31 --------
 4 files changed, 66 insertions(+), 109 deletions(-)
 delete mode 100644 include/linux/platform_data/video-vt8500lcdfb.h

-- 
1.7.9.5

[PATCH 0/5] video: vt8500 patches for 3.10

[Tony Prisk]

Hi Florian,

These patches were posted for 3.9, but I didn't recieve any reply back at the
time. Reposting for 3.10 - based on 3.9-rc2

Regards
Tony P

Julia Lawall (1):
  drivers/video/wm8505fb.c: use devm_ functions

Tony Prisk (4):
  video: vt8500: Make wmt_ge_rops optional
  video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h
  video: vt8500: Correct descriptions in video/Kconfig
  video: vt8500: Adjust contrast in wm8505 framebuffer driver.

 drivers/video/Kconfig                           |   31 ++++----
 drivers/video/vt8500lcdfb.c                     |   17 +++-
 drivers/video/wm8505fb.c                        |   96 ++++++++---------------
 include/linux/platform_data/video-vt8500lcdfb.h |   31 --------
 4 files changed, 66 insertions(+), 109 deletions(-)
 delete mode 100644 include/linux/platform_data/video-vt8500lcdfb.h

-- 
1.7.9.5

[PATCH 1/5] video: vt8500: Make wmt_ge_rops optional

[Tony Prisk]

wmt_ge_rops is a seperate driver to vt8500/wm8505 framebuffer
driver but is currently a required option. This patch makes
accelerated raster ops optional.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/Kconfig       |   22 ++++++++++++----------
 drivers/video/vt8500lcdfb.c |   15 +++++++++++++++
 drivers/video/wm8505fb.c    |   15 +++++++++++++++
 3 files changed, 42 insertions(+), 10 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f..661aa54 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -212,14 +212,6 @@ config FB_SYS_FOPS
        depends on FB
        default n
 
-config FB_WMT_GE_ROPS
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include functions for accelerated rectangle filling and area
-	  copying using WonderMedia Graphics Engine operations.
-
 config FB_DEFERRED_IO
 	bool
 	depends on FB
@@ -1799,7 +1791,8 @@ config FB_AU1200
 config FB_VT8500
 	bool "VT8500 LCD Driver"
 	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_WMT_GE_ROPS
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
 	  This is the framebuffer driver for VIA VT8500 integrated LCD
@@ -1808,12 +1801,21 @@ config FB_VT8500
 config FB_WM8505
 	bool "WM8505 frame buffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_WMT_GE_ROPS
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
 	  This is the framebuffer driver for WonderMedia WM8505/WM8650
 	  integrated LCD controller.
 
+config FB_WMT_GE_ROPS
+	bool "VT8500/WM85xx accelerated raster ops support"
+	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+	default n
+	help
+	  This adds support for accelerated raster operations on the
+	  VIA VT8500 and Wondermedia 85xx series SoCs.
+
 source "drivers/video/geode/Kconfig"
 
 config FB_HIT
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index aa2579c..d8cc1f6 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -33,7 +33,10 @@
 #include <linux/platform_data/video-vt8500lcdfb.h>
 
 #include "vt8500lcdfb.h"
+
+#ifdef CONFIG_FB_WMT_GE_ROPS
 #include "wmt_ge_rops.h"
+#endif
 
 #ifdef CONFIG_OF
 #include <linux/of.h>
@@ -249,12 +252,24 @@ static int vt8500lcd_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
+#ifndef CONFIG_FB_WMT_GE_ROPS
+static int wmt_ge_sync(struct fb_info *p)
+{
+	return 0;
+}
+#endif
+
 static struct fb_ops vt8500lcd_ops = {
 	.owner		= THIS_MODULE,
 	.fb_set_par	= vt8500lcd_set_par,
 	.fb_setcolreg	= vt8500lcd_setcolreg,
+#ifdef CONFIG_FB_WMT_GE_ROPS
 	.fb_fillrect	= wmt_ge_fillrect,
 	.fb_copyarea	= wmt_ge_copyarea,
+#else
+	.fb_fillrect	= sys_fillrect,
+	.fb_copyarea	= sys_copyarea,
+#endif
 	.fb_imageblit	= sys_imageblit,
 	.fb_sync	= wmt_ge_sync,
 	.fb_ioctl	= vt8500lcd_ioctl,
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 4dd0580..db49803 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -35,7 +35,10 @@
 #include <linux/platform_data/video-vt8500lcdfb.h>
 
 #include "wm8505fb_regs.h"
+
+#ifdef CONFIG_FB_WMT_GE_ROPS
 #include "wmt_ge_rops.h"
+#endif
 
 #define DRIVER_NAME "wm8505-fb"
 
@@ -248,12 +251,24 @@ static int wm8505fb_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
+#ifndef CONFIG_FB_WMT_GE_ROPS
+static int wmt_ge_sync(struct fb_info *p)
+{
+	return 0;
+}
+#endif
+
 static struct fb_ops wm8505fb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_set_par	= wm8505fb_set_par,
 	.fb_setcolreg	= wm8505fb_setcolreg,
+#ifdef CONFIG_FB_WMT_GE_ROPS
 	.fb_fillrect	= wmt_ge_fillrect,
 	.fb_copyarea	= wmt_ge_copyarea,
+#else
+	.fb_fillrect	= sys_fillrect,
+	.fb_copyarea	= sys_copyarea,
+#endif
 	.fb_imageblit	= sys_imageblit,
 	.fb_sync	= wmt_ge_sync,
 	.fb_pan_display	= wm8505fb_pan_display,
-- 
1.7.9.5

[PATCH 1/5] video: vt8500: Make wmt_ge_rops optional

[Tony Prisk]

wmt_ge_rops is a seperate driver to vt8500/wm8505 framebuffer
driver but is currently a required option. This patch makes
accelerated raster ops optional.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/Kconfig       |   22 ++++++++++++----------
 drivers/video/vt8500lcdfb.c |   15 +++++++++++++++
 drivers/video/wm8505fb.c    |   15 +++++++++++++++
 3 files changed, 42 insertions(+), 10 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4c1546f..661aa54 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -212,14 +212,6 @@ config FB_SYS_FOPS
        depends on FB
        default n
 
-config FB_WMT_GE_ROPS
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include functions for accelerated rectangle filling and area
-	  copying using WonderMedia Graphics Engine operations.
-
 config FB_DEFERRED_IO
 	bool
 	depends on FB
@@ -1799,7 +1791,8 @@ config FB_AU1200
 config FB_VT8500
 	bool "VT8500 LCD Driver"
 	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_WMT_GE_ROPS
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
 	  This is the framebuffer driver for VIA VT8500 integrated LCD
@@ -1808,12 +1801,21 @@ config FB_VT8500
 config FB_WM8505
 	bool "WM8505 frame buffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_WMT_GE_ROPS
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
 	  This is the framebuffer driver for WonderMedia WM8505/WM8650
 	  integrated LCD controller.
 
+config FB_WMT_GE_ROPS
+	bool "VT8500/WM85xx accelerated raster ops support"
+	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+	default n
+	help
+	  This adds support for accelerated raster operations on the
+	  VIA VT8500 and Wondermedia 85xx series SoCs.
+
 source "drivers/video/geode/Kconfig"
 
 config FB_HIT
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index aa2579c..d8cc1f6 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -33,7 +33,10 @@
 #include <linux/platform_data/video-vt8500lcdfb.h>
 
 #include "vt8500lcdfb.h"
+
+#ifdef CONFIG_FB_WMT_GE_ROPS
 #include "wmt_ge_rops.h"
+#endif
 
 #ifdef CONFIG_OF
 #include <linux/of.h>
@@ -249,12 +252,24 @@ static int vt8500lcd_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
+#ifndef CONFIG_FB_WMT_GE_ROPS
+static int wmt_ge_sync(struct fb_info *p)
+{
+	return 0;
+}
+#endif
+
 static struct fb_ops vt8500lcd_ops = {
 	.owner		= THIS_MODULE,
 	.fb_set_par	= vt8500lcd_set_par,
 	.fb_setcolreg	= vt8500lcd_setcolreg,
+#ifdef CONFIG_FB_WMT_GE_ROPS
 	.fb_fillrect	= wmt_ge_fillrect,
 	.fb_copyarea	= wmt_ge_copyarea,
+#else
+	.fb_fillrect	= sys_fillrect,
+	.fb_copyarea	= sys_copyarea,
+#endif
 	.fb_imageblit	= sys_imageblit,
 	.fb_sync	= wmt_ge_sync,
 	.fb_ioctl	= vt8500lcd_ioctl,
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index 4dd0580..db49803 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -35,7 +35,10 @@
 #include <linux/platform_data/video-vt8500lcdfb.h>
 
 #include "wm8505fb_regs.h"
+
+#ifdef CONFIG_FB_WMT_GE_ROPS
 #include "wmt_ge_rops.h"
+#endif
 
 #define DRIVER_NAME "wm8505-fb"
 
@@ -248,12 +251,24 @@ static int wm8505fb_blank(int blank, struct fb_info *info)
 	return 0;
 }
 
+#ifndef CONFIG_FB_WMT_GE_ROPS
+static int wmt_ge_sync(struct fb_info *p)
+{
+	return 0;
+}
+#endif
+
 static struct fb_ops wm8505fb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_set_par	= wm8505fb_set_par,
 	.fb_setcolreg	= wm8505fb_setcolreg,
+#ifdef CONFIG_FB_WMT_GE_ROPS
 	.fb_fillrect	= wmt_ge_fillrect,
 	.fb_copyarea	= wmt_ge_copyarea,
+#else
+	.fb_fillrect	= sys_fillrect,
+	.fb_copyarea	= sys_copyarea,
+#endif
 	.fb_imageblit	= sys_imageblit,
 	.fb_sync	= wmt_ge_sync,
 	.fb_pan_display	= wm8505fb_pan_display,
-- 
1.7.9.5

[PATCH 2/5] video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h

[Tony Prisk]

With the conversion to devicetree only for arch-vt8500, this
header is no longer required. This patch removes the #include
from the two framebuffer drivers that used it, and the header file.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/vt8500lcdfb.c                     |    2 --
 drivers/video/wm8505fb.c                        |    2 --
 include/linux/platform_data/video-vt8500lcdfb.h |   31 -----------------------
 3 files changed, 35 deletions(-)
 delete mode 100644 include/linux/platform_data/video-vt8500lcdfb.h

diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index d8cc1f6..1c34821 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -30,8 +30,6 @@
 #include <linux/platform_device.h>
 #include <linux/wait.h>
 
-#include <linux/platform_data/video-vt8500lcdfb.h>
-
 #include "vt8500lcdfb.h"
 
 #ifdef CONFIG_FB_WMT_GE_ROPS
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index db49803..ce23a00 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -32,8 +32,6 @@
 #include <linux/of_fdt.h>
 #include <linux/memblock.h>
 
-#include <linux/platform_data/video-vt8500lcdfb.h>
-
 #include "wm8505fb_regs.h"
 
 #ifdef CONFIG_FB_WMT_GE_ROPS
diff --git a/include/linux/platform_data/video-vt8500lcdfb.h b/include/linux/platform_data/video-vt8500lcdfb.h
deleted file mode 100644
index 7f399c3..0000000
--- a/include/linux/platform_data/video-vt8500lcdfb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  VT8500/WM8505 Frame Buffer platform data definitions
- *
- *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
-	struct fb_videomode	mode;
-	u32			xres_virtual;
-	u32			yres_virtual;
-	u32			bpp;
-	unsigned long		video_mem_phys;
-	void			*video_mem_virt;
-	unsigned long		video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
-- 
1.7.9.5

[PATCH 2/5] video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h

[Tony Prisk]

With the conversion to devicetree only for arch-vt8500, this
header is no longer required. This patch removes the #include
from the two framebuffer drivers that used it, and the header file.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/vt8500lcdfb.c                     |    2 --
 drivers/video/wm8505fb.c                        |    2 --
 include/linux/platform_data/video-vt8500lcdfb.h |   31 -----------------------
 3 files changed, 35 deletions(-)
 delete mode 100644 include/linux/platform_data/video-vt8500lcdfb.h

diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index d8cc1f6..1c34821 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -30,8 +30,6 @@
 #include <linux/platform_device.h>
 #include <linux/wait.h>
 
-#include <linux/platform_data/video-vt8500lcdfb.h>
-
 #include "vt8500lcdfb.h"
 
 #ifdef CONFIG_FB_WMT_GE_ROPS
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index db49803..ce23a00 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -32,8 +32,6 @@
 #include <linux/of_fdt.h>
 #include <linux/memblock.h>
 
-#include <linux/platform_data/video-vt8500lcdfb.h>
-
 #include "wm8505fb_regs.h"
 
 #ifdef CONFIG_FB_WMT_GE_ROPS
diff --git a/include/linux/platform_data/video-vt8500lcdfb.h b/include/linux/platform_data/video-vt8500lcdfb.h
deleted file mode 100644
index 7f399c3..0000000
--- a/include/linux/platform_data/video-vt8500lcdfb.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  VT8500/WM8505 Frame Buffer platform data definitions
- *
- *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _VT8500FB_H
-#define _VT8500FB_H
-
-#include <linux/fb.h>
-
-struct vt8500fb_platform_data {
-	struct fb_videomode	mode;
-	u32			xres_virtual;
-	u32			yres_virtual;
-	u32			bpp;
-	unsigned long		video_mem_phys;
-	void			*video_mem_virt;
-	unsigned long		video_mem_len;
-};
-
-#endif /* _VT8500FB_H */
-- 
1.7.9.5

[PATCH 3/5] video: vt8500: Correct descriptions in video/Kconfig

[Tony Prisk]

This patch corrects the descriptions for the VIA VT8500 and
Wondermedia WM8xxx-series framebuffer drivers to correctly reflect
which hardware they support.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/Kconfig |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 661aa54..ad762ed 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1789,7 +1789,7 @@ config FB_AU1200
 	  option au1200fb:panel=<name>.
 
 config FB_VT8500
-	bool "VT8500 LCD Driver"
+	bool "VIA VT8500 framebuffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
@@ -1799,17 +1799,18 @@ config FB_VT8500
 	  controller.
 
 config FB_WM8505
-	bool "WM8505 frame buffer support"
+	bool "Wondermedia WM8xxx-series frame buffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
-	  This is the framebuffer driver for WonderMedia WM8505/WM8650
-	  integrated LCD controller.
+	  This is the framebuffer driver for WonderMedia WM8xxx-series
+	  integrated LCD controller. This driver covers the WM8505, WM8650
+	  and WM8850 SoCs.
 
 config FB_WMT_GE_ROPS
-	bool "VT8500/WM85xx accelerated raster ops support"
+	bool "VT8500/WM8xxx accelerated raster ops support"
 	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
 	default n
 	help
-- 
1.7.9.5

[PATCH 3/5] video: vt8500: Correct descriptions in video/Kconfig

[Tony Prisk]

This patch corrects the descriptions for the VIA VT8500 and
Wondermedia WM8xxx-series framebuffer drivers to correctly reflect
which hardware they support.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/Kconfig |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 661aa54..ad762ed 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1789,7 +1789,7 @@ config FB_AU1200
 	  option au1200fb:panel=<name>.
 
 config FB_VT8500
-	bool "VT8500 LCD Driver"
+	bool "VIA VT8500 framebuffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
@@ -1799,17 +1799,18 @@ config FB_VT8500
 	  controller.
 
 config FB_WM8505
-	bool "WM8505 frame buffer support"
+	bool "Wondermedia WM8xxx-series frame buffer support"
 	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
 	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
 	select FB_SYS_IMAGEBLIT
 	help
-	  This is the framebuffer driver for WonderMedia WM8505/WM8650
-	  integrated LCD controller.
+	  This is the framebuffer driver for WonderMedia WM8xxx-series
+	  integrated LCD controller. This driver covers the WM8505, WM8650
+	  and WM8850 SoCs.
 
 config FB_WMT_GE_ROPS
-	bool "VT8500/WM85xx accelerated raster ops support"
+	bool "VT8500/WM8xxx accelerated raster ops support"
 	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
 	default n
 	help
-- 
1.7.9.5

[PATCH 4/5] drivers/video/wm8505fb.c: use devm_ functions

[Tony Prisk]

From: Julia Lawall <Julia.Lawall@lip6.fr>

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

The patch makes some other cleanups.  First, the original code used
devm_kzalloc, but kfree.  This would lead to a double free.  The problem
was found using the following semantic match (http://coccinelle.lip6.fr/):

// <smpl>
@@
expression x,e;
@@
x = devm_kzalloc(...)
... when != x = e
?-kfree(x,...);
// </smpl>

The error-handing code of devm_request_and_ioremap does not print any
warning message, because devm_request_and_ioremap does this.

The call to dma_alloc_coherent is converted to its devm equivalent,
dmam_alloc_coherent.  This implicitly introduces a call to
dmam_free_coherent, which was completly missing in the original code.

A semicolon is removed at the end of the error-handling code for the call
to dma_alloc_coherent.

The block of code calling fb_alloc_cmap is moved below the block of code
calling wm8505fb_set_par, so that the error-handing code of the call to
wm8505fb_set_par can just return ret.  This way there is only one block of
error-handling code that needs to call fb_dealloc_cmap, and so this is
moved up to the place where it is needed, eliminating the need for all
gotos and labels in the function.  This was suggested by Tony Prisk.

The initializations of fbi and ret at the beginning of the function are not
necessary and are removed.  The call platform_set_drvdata(pdev, NULL); at
the end of the function is also removed.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/wm8505fb.c |   79 +++++++++++-----------------------------------
 1 file changed, 19 insertions(+), 60 deletions(-)

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index ce23a00..b94ebc9 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -287,15 +287,11 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	unsigned long fb_mem_len;
 	void *fb_mem_virt;
 
-	ret = -ENOMEM;
-	fbi = NULL;
-
 	fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
 			sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbi) {
 		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
-		ret = -ENOMEM;
-		goto failed;
+		return -ENOMEM;
 	}
 
 	strcpy(fbi->fb.fix.id, DRIVER_NAME);
@@ -321,31 +317,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.pseudo_palette	= addr;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res = NULL) {
-		dev_err(&pdev->dev, "no I/O memory resource defined\n");
-		ret = -ENODEV;
-		goto failed_fbi;
-	}
-
-	res = request_mem_region(res->start, resource_size(res), DRIVER_NAME);
-	if (res = NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		ret = -EBUSY;
-		goto failed_fbi;
-	}
-
-	fbi->regbase = ioremap(res->start, resource_size(res));
-	if (fbi->regbase = NULL) {
-		dev_err(&pdev->dev, "failed to map I/O memory\n");
-		ret = -EBUSY;
-		goto failed_free_res;
-	}
+	fbi->regbase = devm_request_and_ioremap(&pdev->dev, res);
+	if (fbi->regbase = NULL)
+		return -EBUSY;
 
 	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
 	if (!np) {
 		pr_err("%s: No display description in Device Tree\n", __func__);
-		ret = -EINVAL;
-		goto failed_free_res;
+		return -EINVAL;
 	}
 
 	/*
@@ -364,7 +343,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	ret |= of_property_read_u32(np, "bpp", &bpp);
 	if (ret) {
 		pr_err("%s: Unable to read display properties\n", __func__);
-		goto failed_free_res;
+		return -EINVAL;
 	}
 
 	of_mode.vmode = FB_VMODE_NONINTERLACED;
@@ -378,12 +357,12 @@ static int wm8505fb_probe(struct platform_device *pdev)
 
 	/* try allocating the framebuffer */
 	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
-	fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
+	fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
 				GFP_KERNEL);
 	if (!fb_mem_virt) {
 		pr_err("%s: Failed to allocate framebuffer\n", __func__);
 		return -ENOMEM;
-	};
+	}
 
 	fbi->fb.var.xres_virtual	= of_mode.xres;
 	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
@@ -394,28 +373,29 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.screen_base		= fb_mem_virt;
 	fbi->fb.screen_size		= fb_mem_len;
 
-	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
-		dev_err(&pdev->dev, "Failed to allocate color map\n");
-		ret = -ENOMEM;
-		goto failed_free_io;
-	}
-
-	wm8505fb_init_hw(&fbi->fb);
-
 	fbi->contrast = 0x80;
 	ret = wm8505fb_set_par(&fbi->fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set parameters\n");
-		goto failed_free_cmap;
+		return ret;
 	}
 
+	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
+		dev_err(&pdev->dev, "Failed to allocate color map\n");
+		return -ENOMEM;
+	}
+
+	wm8505fb_init_hw(&fbi->fb);
+
 	platform_set_drvdata(pdev, fbi);
 
 	ret = register_framebuffer(&fbi->fb);
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Failed to register framebuffer device: %d\n", ret);
-		goto failed_free_cmap;
+		if (fbi->fb.cmap.len)
+			fb_dealloc_cmap(&fbi->fb.cmap);
+		return ret;
 	}
 
 	ret = device_create_file(&pdev->dev, &dev_attr_contrast);
@@ -429,25 +409,11 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	       fbi->fb.fix.smem_start + fbi->fb.fix.smem_len - 1);
 
 	return 0;
-
-failed_free_cmap:
-	if (fbi->fb.cmap.len)
-		fb_dealloc_cmap(&fbi->fb.cmap);
-failed_free_io:
-	iounmap(fbi->regbase);
-failed_free_res:
-	release_mem_region(res->start, resource_size(res));
-failed_fbi:
-	platform_set_drvdata(pdev, NULL);
-	kfree(fbi);
-failed:
-	return ret;
 }
 
 static int wm8505fb_remove(struct platform_device *pdev)
 {
 	struct wm8505fb_info *fbi = platform_get_drvdata(pdev);
-	struct resource *res;
 
 	device_remove_file(&pdev->dev, &dev_attr_contrast);
 
@@ -458,13 +424,6 @@ static int wm8505fb_remove(struct platform_device *pdev)
 	if (fbi->fb.cmap.len)
 		fb_dealloc_cmap(&fbi->fb.cmap);
 
-	iounmap(fbi->regbase);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(fbi);
-
 	return 0;
 }
 
-- 
1.7.9.5

[PATCH 4/5] drivers/video/wm8505fb.c: use devm_ functions

[Tony Prisk]

From: Julia Lawall <Julia.Lawall@lip6.fr>

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

The patch makes some other cleanups.  First, the original code used
devm_kzalloc, but kfree.  This would lead to a double free.  The problem
was found using the following semantic match (http://coccinelle.lip6.fr/):

// <smpl>
@@
expression x,e;
@@
x = devm_kzalloc(...)
... when != x = e
?-kfree(x,...);
// </smpl>

The error-handing code of devm_request_and_ioremap does not print any
warning message, because devm_request_and_ioremap does this.

The call to dma_alloc_coherent is converted to its devm equivalent,
dmam_alloc_coherent.  This implicitly introduces a call to
dmam_free_coherent, which was completly missing in the original code.

A semicolon is removed at the end of the error-handling code for the call
to dma_alloc_coherent.

The block of code calling fb_alloc_cmap is moved below the block of code
calling wm8505fb_set_par, so that the error-handing code of the call to
wm8505fb_set_par can just return ret.  This way there is only one block of
error-handling code that needs to call fb_dealloc_cmap, and so this is
moved up to the place where it is needed, eliminating the need for all
gotos and labels in the function.  This was suggested by Tony Prisk.

The initializations of fbi and ret at the beginning of the function are not
necessary and are removed.  The call platform_set_drvdata(pdev, NULL); at
the end of the function is also removed.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/wm8505fb.c |   79 +++++++++++-----------------------------------
 1 file changed, 19 insertions(+), 60 deletions(-)

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index ce23a00..b94ebc9 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -287,15 +287,11 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	unsigned long fb_mem_len;
 	void *fb_mem_virt;
 
-	ret = -ENOMEM;
-	fbi = NULL;
-
 	fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
 			sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbi) {
 		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
-		ret = -ENOMEM;
-		goto failed;
+		return -ENOMEM;
 	}
 
 	strcpy(fbi->fb.fix.id, DRIVER_NAME);
@@ -321,31 +317,14 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.pseudo_palette	= addr;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no I/O memory resource defined\n");
-		ret = -ENODEV;
-		goto failed_fbi;
-	}
-
-	res = request_mem_region(res->start, resource_size(res), DRIVER_NAME);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request I/O memory\n");
-		ret = -EBUSY;
-		goto failed_fbi;
-	}
-
-	fbi->regbase = ioremap(res->start, resource_size(res));
-	if (fbi->regbase == NULL) {
-		dev_err(&pdev->dev, "failed to map I/O memory\n");
-		ret = -EBUSY;
-		goto failed_free_res;
-	}
+	fbi->regbase = devm_request_and_ioremap(&pdev->dev, res);
+	if (fbi->regbase == NULL)
+		return -EBUSY;
 
 	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
 	if (!np) {
 		pr_err("%s: No display description in Device Tree\n", __func__);
-		ret = -EINVAL;
-		goto failed_free_res;
+		return -EINVAL;
 	}
 
 	/*
@@ -364,7 +343,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	ret |= of_property_read_u32(np, "bpp", &bpp);
 	if (ret) {
 		pr_err("%s: Unable to read display properties\n", __func__);
-		goto failed_free_res;
+		return -EINVAL;
 	}
 
 	of_mode.vmode = FB_VMODE_NONINTERLACED;
@@ -378,12 +357,12 @@ static int wm8505fb_probe(struct platform_device *pdev)
 
 	/* try allocating the framebuffer */
 	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
-	fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
+	fb_mem_virt = dmam_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
 				GFP_KERNEL);
 	if (!fb_mem_virt) {
 		pr_err("%s: Failed to allocate framebuffer\n", __func__);
 		return -ENOMEM;
-	};
+	}
 
 	fbi->fb.var.xres_virtual	= of_mode.xres;
 	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
@@ -394,28 +373,29 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.screen_base		= fb_mem_virt;
 	fbi->fb.screen_size		= fb_mem_len;
 
-	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
-		dev_err(&pdev->dev, "Failed to allocate color map\n");
-		ret = -ENOMEM;
-		goto failed_free_io;
-	}
-
-	wm8505fb_init_hw(&fbi->fb);
-
 	fbi->contrast = 0x80;
 	ret = wm8505fb_set_par(&fbi->fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set parameters\n");
-		goto failed_free_cmap;
+		return ret;
 	}
 
+	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
+		dev_err(&pdev->dev, "Failed to allocate color map\n");
+		return -ENOMEM;
+	}
+
+	wm8505fb_init_hw(&fbi->fb);
+
 	platform_set_drvdata(pdev, fbi);
 
 	ret = register_framebuffer(&fbi->fb);
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"Failed to register framebuffer device: %d\n", ret);
-		goto failed_free_cmap;
+		if (fbi->fb.cmap.len)
+			fb_dealloc_cmap(&fbi->fb.cmap);
+		return ret;
 	}
 
 	ret = device_create_file(&pdev->dev, &dev_attr_contrast);
@@ -429,25 +409,11 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	       fbi->fb.fix.smem_start + fbi->fb.fix.smem_len - 1);
 
 	return 0;
-
-failed_free_cmap:
-	if (fbi->fb.cmap.len)
-		fb_dealloc_cmap(&fbi->fb.cmap);
-failed_free_io:
-	iounmap(fbi->regbase);
-failed_free_res:
-	release_mem_region(res->start, resource_size(res));
-failed_fbi:
-	platform_set_drvdata(pdev, NULL);
-	kfree(fbi);
-failed:
-	return ret;
 }
 
 static int wm8505fb_remove(struct platform_device *pdev)
 {
 	struct wm8505fb_info *fbi = platform_get_drvdata(pdev);
-	struct resource *res;
 
 	device_remove_file(&pdev->dev, &dev_attr_contrast);
 
@@ -458,13 +424,6 @@ static int wm8505fb_remove(struct platform_device *pdev)
 	if (fbi->fb.cmap.len)
 		fb_dealloc_cmap(&fbi->fb.cmap);
 
-	iounmap(fbi->regbase);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
-	kfree(fbi);
-
 	return 0;
 }
 
-- 
1.7.9.5

[PATCH 5/5] video: vt8500: Adjust contrast in wm8505 framebuffer driver.

[Tony Prisk]

The contrast value was typo'd on the original commit (0x80 instead of
0x08). Following feedback from an enduser, a value of 0x10 seems more
suitable due to the default backlight being <100%.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/wm8505fb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index b94ebc9..5057457 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -373,7 +373,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.screen_base		= fb_mem_virt;
 	fbi->fb.screen_size		= fb_mem_len;
 
-	fbi->contrast = 0x80;
+	fbi->contrast = 0x10;
 	ret = wm8505fb_set_par(&fbi->fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set parameters\n");
-- 
1.7.9.5

[PATCH 5/5] video: vt8500: Adjust contrast in wm8505 framebuffer driver.

[Tony Prisk]

The contrast value was typo'd on the original commit (0x80 instead of
0x08). Following feedback from an enduser, a value of 0x10 seems more
suitable due to the default backlight being <100%.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/video/wm8505fb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index b94ebc9..5057457 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -373,7 +373,7 @@ static int wm8505fb_probe(struct platform_device *pdev)
 	fbi->fb.screen_base		= fb_mem_virt;
 	fbi->fb.screen_size		= fb_mem_len;
 
-	fbi->contrast = 0x80;
+	fbi->contrast = 0x10;
 	ret = wm8505fb_set_par(&fbi->fb);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to set parameters\n");
-- 
1.7.9.5

Re: [PATCH 0/5] video: vt8500 patches for 3.10

[Jean-Christophe PLAGNIOL-VILLARD]

On 19:46 Sat 23 Mar     , Tony Prisk wrote:
> Hi Florian,
> 
> These patches were posted for 3.9, but I didn't recieve any reply back at the
> time. Reposting for 3.10 - based on 3.9-rc2
> 
> Regards
> Tony P
look ok

Best Regards,
J.
> 
> Julia Lawall (1):
>   drivers/video/wm8505fb.c: use devm_ functions
> 
> Tony Prisk (4):
>   video: vt8500: Make wmt_ge_rops optional
>   video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h
>   video: vt8500: Correct descriptions in video/Kconfig
>   video: vt8500: Adjust contrast in wm8505 framebuffer driver.
> 
>  drivers/video/Kconfig                           |   31 ++++----
>  drivers/video/vt8500lcdfb.c                     |   17 +++-
>  drivers/video/wm8505fb.c                        |   96 ++++++++---------------
>  include/linux/platform_data/video-vt8500lcdfb.h |   31 --------
>  4 files changed, 66 insertions(+), 109 deletions(-)
>  delete mode 100644 include/linux/platform_data/video-vt8500lcdfb.h
> 
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 0/5] video: vt8500 patches for 3.10

[Jean-Christophe PLAGNIOL-VILLARD]

On 19:46 Sat 23 Mar     , Tony Prisk wrote:
> Hi Florian,
> 
> These patches were posted for 3.9, but I didn't recieve any reply back at the
> time. Reposting for 3.10 - based on 3.9-rc2
> 
> Regards
> Tony P
look ok

Best Regards,
J.
> 
> Julia Lawall (1):
>   drivers/video/wm8505fb.c: use devm_ functions
> 
> Tony Prisk (4):
>   video: vt8500: Make wmt_ge_rops optional
>   video: vt8500: Remove unused platform_data/video-vt8500lcdfb.h
>   video: vt8500: Correct descriptions in video/Kconfig
>   video: vt8500: Adjust contrast in wm8505 framebuffer driver.
> 
>  drivers/video/Kconfig                           |   31 ++++----
>  drivers/video/vt8500lcdfb.c                     |   17 +++-
>  drivers/video/wm8505fb.c                        |   96 ++++++++---------------
>  include/linux/platform_data/video-vt8500lcdfb.h |   31 --------
>  4 files changed, 66 insertions(+), 109 deletions(-)
>  delete mode 100644 include/linux/platform_data/video-vt8500lcdfb.h
> 
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/5] video: vt8500 patches for 3.10

[Tony Prisk]

On 30/03/13 07:44, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 19:46 Sat 23 Mar     , Tony Prisk wrote:
>> Hi Florian,
>>
>> These patches were posted for 3.9, but I didn't recieve any reply back at the
>> time. Reposting for 3.10 - based on 3.9-rc2
>>
>> Regards
>> Tony P
> look ok
>
> Best Regards,
> J.
>
Jean-Christope,

Can I add a reviewed-by for these patches?

Regards
Tony P

[PATCH 0/5] video: vt8500 patches for 3.10

[Tony Prisk]

On 30/03/13 07:44, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 19:46 Sat 23 Mar     , Tony Prisk wrote:
>> Hi Florian,
>>
>> These patches were posted for 3.9, but I didn't recieve any reply back at the
>> time. Reposting for 3.10 - based on 3.9-rc2
>>
>> Regards
>> Tony P
> look ok
>
> Best Regards,
> J.
>
Jean-Christope,

Can I add a reviewed-by for these patches?

Regards
Tony P