* [PATCH 0/3] ARM: mxs: icoll code cleanup
@ 2013-03-25 15:22 Shawn Guo
2013-03-25 15:22 ` [PATCH 1/3] ARM: mxs: get icoll base address from device tree Shawn Guo
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Shawn Guo @ 2013-03-25 15:22 UTC (permalink / raw)
To: linux-arm-kernel
The series cleans up mxs icoll code and then moves it into
drivers/irqchip. It's another step to multiplatform support.
Shawn Guo (3):
ARM: mxs: get icoll base address from device tree
ARM: mxs: call stmp_reset_block() in icoll
ARM: mxs: move icoll driver into drivers/irqchip
arch/arm/mach-mxs/Makefile | 2 +-
arch/arm/mach-mxs/include/mach/common.h | 3 ---
arch/arm/mach-mxs/mach-mxs.c | 6 +++--
drivers/irqchip/Makefile | 1 +
.../mach-mxs/icoll.c => drivers/irqchip/irq-mxs.c | 24 ++++++++------------
include/linux/irqchip/mxs.h | 14 ++++++++++++
6 files changed, 30 insertions(+), 20 deletions(-)
rename arch/arm/mach-mxs/icoll.c => drivers/irqchip/irq-mxs.c (89%)
create mode 100644 include/linux/irqchip/mxs.h
--
1.7.9.5
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 1/3] ARM: mxs: get icoll base address from device tree
2013-03-25 15:22 [PATCH 0/3] ARM: mxs: icoll code cleanup Shawn Guo
@ 2013-03-25 15:22 ` Shawn Guo
2013-03-25 15:22 ` [PATCH 2/3] ARM: mxs: call stmp_reset_block() in icoll Shawn Guo
2013-03-25 15:22 ` [PATCH 3/3] ARM: mxs: move icoll driver into drivers/irqchip Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2013-03-25 15:22 UTC (permalink / raw)
To: linux-arm-kernel
Rather than using the static definition, it gets icoll base address
with mapping from device tree.
As the result, <mach/mxs.h> inclusion can be removed from the driver
now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-mxs/icoll.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
index e26eeba..1cf32af 100644
--- a/arch/arm/mach-mxs/icoll.c
+++ b/arch/arm/mach-mxs/icoll.c
@@ -22,9 +22,9 @@
#include <linux/irqdomain.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/exception.h>
-#include <mach/mxs.h>
#include <mach/common.h>
#define HW_ICOLL_VECTOR 0x0000
@@ -38,7 +38,7 @@
#define ICOLL_NUM_IRQS 128
-static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
+static void __iomem *icoll_base;
static struct irq_domain *icoll_domain;
static void icoll_ack_irq(struct irq_data *d)
@@ -103,6 +103,9 @@ static struct irq_domain_ops icoll_irq_domain_ops = {
static void __init icoll_of_init(struct device_node *np,
struct device_node *interrupt_parent)
{
+ icoll_base = of_iomap(np, 0);
+ WARN_ON(!icoll_base);
+
/*
* Interrupt Collector reset, which initializes the priority
* for each irq to level 0.
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 2/3] ARM: mxs: call stmp_reset_block() in icoll
2013-03-25 15:22 [PATCH 0/3] ARM: mxs: icoll code cleanup Shawn Guo
2013-03-25 15:22 ` [PATCH 1/3] ARM: mxs: get icoll base address from device tree Shawn Guo
@ 2013-03-25 15:22 ` Shawn Guo
2013-03-25 15:22 ` [PATCH 3/3] ARM: mxs: move icoll driver into drivers/irqchip Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2013-03-25 15:22 UTC (permalink / raw)
To: linux-arm-kernel
Call stmp_reset_block() rather than mxs_reset_block(), so that
<mach/common.h> inclusion can be removed from icoll driver.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-mxs/icoll.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
index 1cf32af..b4d6207 100644
--- a/arch/arm/mach-mxs/icoll.c
+++ b/arch/arm/mach-mxs/icoll.c
@@ -24,8 +24,8 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
#include <asm/exception.h>
-#include <mach/common.h>
#define HW_ICOLL_VECTOR 0x0000
#define HW_ICOLL_LEVELACK 0x0010
@@ -110,7 +110,7 @@ static void __init icoll_of_init(struct device_node *np,
* Interrupt Collector reset, which initializes the priority
* for each irq to level 0.
*/
- mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
+ stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
&icoll_irq_domain_ops, NULL);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 3/3] ARM: mxs: move icoll driver into drivers/irqchip
2013-03-25 15:22 [PATCH 0/3] ARM: mxs: icoll code cleanup Shawn Guo
2013-03-25 15:22 ` [PATCH 1/3] ARM: mxs: get icoll base address from device tree Shawn Guo
2013-03-25 15:22 ` [PATCH 2/3] ARM: mxs: call stmp_reset_block() in icoll Shawn Guo
@ 2013-03-25 15:22 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2013-03-25 15:22 UTC (permalink / raw)
To: linux-arm-kernel
Move icoll.c into drivers/irqchip as irq-mxs.c, and along with the
renaming, change the driver to use IRQCHIP_DECLARE.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-mxs/Makefile | 2 +-
arch/arm/mach-mxs/include/mach/common.h | 3 ---
arch/arm/mach-mxs/mach-mxs.c | 6 ++++--
drivers/irqchip/Makefile | 1 +
.../mach-mxs/icoll.c => drivers/irqchip/irq-mxs.c | 13 +++----------
include/linux/irqchip/mxs.h | 14 ++++++++++++++
6 files changed, 23 insertions(+), 16 deletions(-)
rename arch/arm/mach-mxs/icoll.c => drivers/irqchip/irq-mxs.c (94%)
create mode 100644 include/linux/irqchip/mxs.h
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 76c336e..b934603 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,5 +1,5 @@
# Common support
-obj-y := icoll.o ocotp.o system.o mm.o
+obj-y := ocotp.o system.o mm.o
obj-$(CONFIG_PM) += pm.o
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index e043c47..df2a4ef 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -22,7 +22,4 @@ extern void mx23_map_io(void);
extern int mx28_clocks_init(void);
extern void mx28_map_io(void);
-extern void icoll_init_irq(void);
-extern void icoll_handle_irq(struct pt_regs *);
-
#endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 796c5dd..79a5ce4 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -18,6 +18,8 @@
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mxs.h>
#include <linux/micrel_phy.h>
#include <linux/mxsfb.h>
#include <linux/of_platform.h>
@@ -469,7 +471,7 @@ static const char *imx28_dt_compat[] __initdata = {
DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
.map_io = mx23_map_io,
- .init_irq = icoll_init_irq,
+ .init_irq = irqchip_init,
.handle_irq = icoll_handle_irq,
.init_time = imx23_timer_init,
.init_machine = mxs_machine_init,
@@ -479,7 +481,7 @@ MACHINE_END
DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
.map_io = mx28_map_io,
- .init_irq = icoll_init_irq,
+ .init_irq = irqchip_init,
.handle_irq = icoll_handle_irq,
.init_time = imx28_timer_init,
.init_machine = mxs_machine_init,
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 98e3b87..9d8f4f1 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
+obj-$(CONFIG_ARCH_MXS) += irq-mxs.o
obj-$(CONFIG_METAG) += irq-metag-ext.o
obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o
diff --git a/arch/arm/mach-mxs/icoll.c b/drivers/irqchip/irq-mxs.c
similarity index 94%
rename from arch/arm/mach-mxs/icoll.c
rename to drivers/irqchip/irq-mxs.c
index b4d6207..29889bb 100644
--- a/arch/arm/mach-mxs/icoll.c
+++ b/drivers/irqchip/irq-mxs.c
@@ -27,6 +27,8 @@
#include <linux/stmp_device.h>
#include <asm/exception.h>
+#include "irqchip.h"
+
#define HW_ICOLL_VECTOR 0x0000
#define HW_ICOLL_LEVELACK 0x0010
#define HW_ICOLL_CTRL 0x0020
@@ -116,13 +118,4 @@ static void __init icoll_of_init(struct device_node *np,
&icoll_irq_domain_ops, NULL);
WARN_ON(!icoll_domain);
}
-
-static const struct of_device_id icoll_of_match[] __initconst = {
- {.compatible = "fsl,icoll", .data = icoll_of_init},
- { /* sentinel */ }
-};
-
-void __init icoll_init_irq(void)
-{
- of_irq_init(icoll_of_match);
-}
+IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);
diff --git a/include/linux/irqchip/mxs.h b/include/linux/irqchip/mxs.h
new file mode 100644
index 0000000..9039a53
--- /dev/null
+++ b/include/linux/irqchip/mxs.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_IRQCHIP_MXS_H
+#define __LINUX_IRQCHIP_MXS_H
+
+extern void icoll_handle_irq(struct pt_regs *);
+
+#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-03-25 15:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-25 15:22 [PATCH 0/3] ARM: mxs: icoll code cleanup Shawn Guo
2013-03-25 15:22 ` [PATCH 1/3] ARM: mxs: get icoll base address from device tree Shawn Guo
2013-03-25 15:22 ` [PATCH 2/3] ARM: mxs: call stmp_reset_block() in icoll Shawn Guo
2013-03-25 15:22 ` [PATCH 3/3] ARM: mxs: move icoll driver into drivers/irqchip Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.