From: Simon Baatz <gmbnomis@gmail.com> To: linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org Cc: jason@lakedaemon.net, andrew@lunn.ch, cjb@laptop.org, thomas.petazzoni@free-electrons.com Subject: [PATCH 2/3] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug Date: Mon, 22 Apr 2013 21:54:59 +0200 [thread overview] Message-ID: <1366660500-26835-3-git-send-email-gmbnomis@gmail.com> (raw) In-Reply-To: <1366660500-26835-1-git-send-email-gmbnomis@gmail.com> Signed-off-by: Simon Baatz <gmbnomis@gmail.com> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi | 97 +++++++++++++++++++++ arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts | 40 +++++++++ arch/arm/boot/dts/kirkwood-sheevaplug.dts | 43 +++++++++ 4 files changed, 182 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c62558..c2f52db 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -70,6 +70,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ns2max.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ + kirkwood-sheevaplug.dtb \ + kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi new file mode 100644 index 0000000..9d59475 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -0,0 +1,97 @@ +/* + * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_red: pmx-led-red { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_blue: pmx-led-blue { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_sdio_wp: pmx-sdio-wp { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "root"; + reg = <0x0500000 0x1fb00000>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "sheevaplug:blue:health"; + gpios = <&gpio1 17 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts new file mode 100644 index 0000000..1c6946a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -0,0 +1,40 @@ +/* + * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/dts-v1/; + +/include/ "kirkwood-sheevaplug-common.dtsi" + +/ { + model = "Globalscale Technologies eSATA SheevaPlug"; + compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_usb_power_enable + &pmx_led_blue>; + pinctrl-names = "default"; + + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 12 1>; + wp-gpios = <&gpio1 15 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts new file mode 100644 index 0000000..ca2ac1c --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -0,0 +1,43 @@ +/* + * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/dts-v1/; + +/include/ "kirkwood-sheevaplug-common.dtsi" + +/ { + model = "Globalscale Technologies SheevaPlug"; + compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_usb_power_enable + &pmx_led_red + &pmx_led_blue>; + pinctrl-names = "default"; + + }; + + mvsdio@90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + misc { + label = "sheevaplug:red:misc"; + gpios = <&gpio1 14 1>; + }; + }; +}; -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: gmbnomis@gmail.com (Simon Baatz) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/3] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug Date: Mon, 22 Apr 2013 21:54:59 +0200 [thread overview] Message-ID: <1366660500-26835-3-git-send-email-gmbnomis@gmail.com> (raw) In-Reply-To: <1366660500-26835-1-git-send-email-gmbnomis@gmail.com> Signed-off-by: Simon Baatz <gmbnomis@gmail.com> --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi | 97 +++++++++++++++++++++ arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts | 40 +++++++++ arch/arm/boot/dts/kirkwood-sheevaplug.dts | 43 +++++++++ 4 files changed, 182 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts create mode 100644 arch/arm/boot/dts/kirkwood-sheevaplug.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c62558..c2f52db 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -70,6 +70,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ns2max.dtb \ kirkwood-ns2mini.dtb \ kirkwood-nsa310.dtb \ + kirkwood-sheevaplug.dtb \ + kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb \ diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi new file mode 100644 index 0000000..9d59475 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -0,0 +1,97 @@ +/* + * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp at f1000000 { + pinctrl: pinctrl at 10000 { + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_red: pmx-led-red { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_blue: pmx-led-blue { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_sdio_wp: pmx-sdio-wp { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + serial at 12000 { + status = "okay"; + }; + + nand at 3000000 { + status = "okay"; + + partition at 0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition at 100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition at 500000 { + label = "root"; + reg = <0x0500000 0x1fb00000>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator at 1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "sheevaplug:blue:health"; + gpios = <&gpio1 17 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts new file mode 100644 index 0000000..1c6946a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -0,0 +1,40 @@ +/* + * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/dts-v1/; + +/include/ "kirkwood-sheevaplug-common.dtsi" + +/ { + model = "Globalscale Technologies eSATA SheevaPlug"; + compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp at f1000000 { + pinctrl: pinctrl at 10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_usb_power_enable + &pmx_led_blue>; + pinctrl-names = "default"; + + }; + + sata at 80000 { + status = "okay"; + nr-ports = <2>; + }; + + mvsdio at 90000 { + pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 12 1>; + wp-gpios = <&gpio1 15 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts new file mode 100644 index 0000000..ca2ac1c --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -0,0 +1,43 @@ +/* + * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug + * + * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> + * + * Licensed under GPLv2 + */ + +/dts-v1/; + +/include/ "kirkwood-sheevaplug-common.dtsi" + +/ { + model = "Globalscale Technologies SheevaPlug"; + compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp at f1000000 { + pinctrl: pinctrl at 10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_usb_power_enable + &pmx_led_red + &pmx_led_blue>; + pinctrl-names = "default"; + + }; + + mvsdio at 90000 { + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + misc { + label = "sheevaplug:red:misc"; + gpios = <&gpio1 14 1>; + }; + }; +}; -- 1.7.9.5
next prev parent reply other threads:[~2013-04-22 19:55 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-04-22 19:54 [PATCH 0/3] ARM: Kirkwood: Add DT support for (eSATA) Sheevaplug Simon Baatz 2013-04-22 19:54 ` Simon Baatz 2013-04-22 19:54 ` [PATCH 1/3] mmc: mvsdio: Support inverted CD and WP GPIO lines Simon Baatz 2013-04-22 19:54 ` Simon Baatz 2013-04-22 20:03 ` Chris Ball 2013-04-22 20:03 ` Chris Ball 2013-04-22 20:37 ` Andrew Lunn 2013-04-22 20:37 ` Andrew Lunn 2013-04-22 21:09 ` Jason Cooper 2013-04-22 21:09 ` Jason Cooper 2013-04-22 21:45 ` Andrew Lunn 2013-04-22 21:45 ` Andrew Lunn 2013-04-22 21:50 ` Chris Ball 2013-04-22 21:50 ` Chris Ball 2013-04-23 1:48 ` Thomas Petazzoni 2013-04-23 1:48 ` Thomas Petazzoni 2013-04-23 21:22 ` Simon Baatz 2013-04-23 21:22 ` Simon Baatz 2013-04-22 22:54 ` Jason Cooper 2013-04-22 22:54 ` Jason Cooper 2013-04-22 19:54 ` Simon Baatz [this message] 2013-04-22 19:54 ` [PATCH 2/3] ARM: Kirkwood: Add dts files for Sheevaplug and eSATA Sheevaplug Simon Baatz 2013-04-22 19:55 ` [PATCH 3/3] ARM: Kirkwood: Add DT support for Sheevaplug and Sheevaplug eSATA Simon Baatz 2013-04-22 19:55 ` Simon Baatz 2013-04-23 5:00 ` [PATCH 0/3] ARM: Kirkwood: Add DT support for (eSATA) Sheevaplug Andrew Lunn 2013-04-23 5:00 ` Andrew Lunn 2013-05-13 17:30 ` Jason Cooper 2013-05-13 17:30 ` Jason Cooper
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1366660500-26835-3-git-send-email-gmbnomis@gmail.com \ --to=gmbnomis@gmail.com \ --cc=andrew@lunn.ch \ --cc=cjb@laptop.org \ --cc=jason@lakedaemon.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mmc@vger.kernel.org \ --cc=thomas.petazzoni@free-electrons.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.