[PATCH 17/35] ARM: shmobile: mackerel: Register pinctrl mapping for SCIF

[PATCH 17/35] ARM: shmobile: mackerel: Register pinctrl mapping for SCIF

[Laurent Pinchart]

Replace the GPIO-based SCIF pinmux configuration by a pinctrl mapping.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/board-mackerel.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 7a4048a..66442a2 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1340,6 +1340,12 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
 				  "lcd_data24", "lcd"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
 				  "lcd_sync", "lcd"),
+	/* SCIFA0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
+				  "scifa0_data", "scifa0"),
+	/* SCIFA2 (GT-720F GPS module) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372",
+				  "scifa2_data", "scifa2"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
 				  "sdhi0_data4", "sdhi0"),
@@ -1408,10 +1414,6 @@ static void __init mackerel_init(void)
 				  ARRAY_SIZE(mackerel_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* enable SCIFA0 */
-	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
-
 	/* enable SMSC911X */
 	gpio_request(GPIO_FN_CS5A,	NULL);
 	gpio_request(GPIO_FN_IRQ6_39,	NULL);
@@ -1464,10 +1466,6 @@ static void __init mackerel_init(void)
 	/* SDHI0 PORT172 card-detect IRQ26 */
 	gpio_request(GPIO_FN_IRQ26_172, NULL);
 
-	/* enable GPS module (GT-720F) */
-	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
-	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
-
 	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
 	srcr4 = __raw_readl(SRCR4);
 	__raw_writel(srcr4 | (1 << 13), SRCR4);
-- 
1.8.1.5