* UCM profiles taken from Ubuntu
@ 2013-05-10 12:51 Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 1/5] DAISY-I2S: add Samsung ARM Chromebook UCM config from ChromeOS Marcin Juszkiewicz
` (5 more replies)
0 siblings, 6 replies; 15+ messages in thread
From: Marcin Juszkiewicz @ 2013-05-10 12:51 UTC (permalink / raw)
To: alsa-devel
Cc: Liam Girgwood, Luke Yelavich, Mark Brown, Peter Robinson, Jordi Mallach
When I bought Samsung ARM Chromebook few months ago I had no idea
about UCM profiles and burnt speakers (left is dead, right is
resting). Then I learnt, took ones from ChromeOS and added them into
Ubuntu so other users will be a bit more safe.
Later I had a discussion with some Debian, Ubuntu, Fedora developers
about how to solve such problems and how to keep UCM profiles shared
between distributions.
Liam Girdwood pointed me to not used git tree at ALSA Project server
and finally I reminded myself about it.
The idea is to collect UCM profiles, keep them in one place and create
alsa-ucm package in each distribution.
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/5] DAISY-I2S: add Samsung ARM Chromebook UCM config from ChromeOS
2013-05-10 12:51 UCM profiles taken from Ubuntu Marcin Juszkiewicz
@ 2013-05-10 12:51 ` Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 2/5] PandaBoard: add UCM config from Ubuntu Marcin Juszkiewicz
` (4 subsequent siblings)
5 siblings, 0 replies; 15+ messages in thread
From: Marcin Juszkiewicz @ 2013-05-10 12:51 UTC (permalink / raw)
To: alsa-devel
Cc: Marcin Juszkiewicz, Liam Girgwood, Luke Yelavich, Mark Brown,
Peter Robinson, Jordi Mallach
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
---
DAISY-I2S/DAISY-I2S.conf | 6 +++++
DAISY-I2S/HiFi.conf | 61 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 67 insertions(+)
create mode 100644 DAISY-I2S/DAISY-I2S.conf
create mode 100644 DAISY-I2S/HiFi.conf
diff --git a/DAISY-I2S/DAISY-I2S.conf b/DAISY-I2S/DAISY-I2S.conf
new file mode 100644
index 0000000..0f4b5fc
--- /dev/null
+++ b/DAISY-I2S/DAISY-I2S.conf
@@ -0,0 +1,6 @@
+Comment "Daisy internal card"
+
+SectionUseCase."HiFi" {
+ File "HiFi.conf"
+ Comment "Default"
+}
diff --git a/DAISY-I2S/HiFi.conf b/DAISY-I2S/HiFi.conf
new file mode 100644
index 0000000..66b0afa
--- /dev/null
+++ b/DAISY-I2S/HiFi.conf
@@ -0,0 +1,61 @@
+SectionVerb {
+ EnableSequence [
+ cdev "hw:DAISYI2S"
+ cset "name='Left Speaker Mixer Left DAC1 Switch' on"
+ cset "name='Right Speaker Mixer Right DAC1 Switch' on"
+ cset "name='Left Headphone Mixer Left DAC1 Switch' on"
+ cset "name='Right Headphone Mixer Right DAC1 Switch' on"
+ cset "name='DMIC1 Left Capture Switch' on"
+ cset "name='DMIC1 Right Capture Switch' on"
+ cset "name='MIC2 External Mic Switch' on"
+ cset "name='Left ADC Mixer MIC2 Switch' on"
+ cset "name='Right ADC Mixer MIC2 Switch' on"
+ cset "name='EQ1 Mode' Default"
+ ]
+ DisableSequence [
+ ]
+}
+
+SectionDevice."Headphone".0 {
+ Value {
+ JackName "DAISY-I2S Headphone Jack"
+ }
+
+ EnableSequence [
+ cdev "hw:DAISYI2S"
+ cset "name='EQ1 Switch' off"
+ cset "name='Left Headphone Mixer Left DAC1 Switch' on"
+ cset "name='Right Headphone Mixer Right DAC1 Switch' on"
+ ]
+ DisableSequence [
+ cdev "hw:DAISYI2S"
+ cset "name='EQ1 Mode' Default"
+ cset "name='EQ1 Switch' on"
+ cset "name='Left Speaker Mixer Left DAC1 Switch' on"
+ cset "name='Right Speaker Mixer Right DAC1 Switch' on"
+ ]
+}
+
+SectionDevice."Mic".0 {
+ Value {
+ JackName "DAISY-I2S Mic Jack"
+ }
+
+ EnableSequence [
+ cdev "hw:DAISYI2S"
+
+ cset "name='DMIC1 Left Capture Switch' off"
+ cset "name='DMIC1 Right Capture Switch' off"
+ cset "name='Left ADC Mixer MIC2 Switch' on"
+ cset "name='Right ADC Mixer MIC2 Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:DAISYI2S"
+
+ cset "name='Left ADC Mixer MIC2 Switch' off"
+ cset "name='Right ADC Mixer MIC2 Switch' off"
+ cset "name='DMIC1 Left Capture Switch' on"
+ cset "name='DMIC1 Right Capture Switch' on"
+ ]
+}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 2/5] PandaBoard: add UCM config from Ubuntu
2013-05-10 12:51 UCM profiles taken from Ubuntu Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 1/5] DAISY-I2S: add Samsung ARM Chromebook UCM config from ChromeOS Marcin Juszkiewicz
@ 2013-05-10 12:51 ` Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 3/5] PandaBoardES: " Marcin Juszkiewicz
` (3 subsequent siblings)
5 siblings, 0 replies; 15+ messages in thread
From: Marcin Juszkiewicz @ 2013-05-10 12:51 UTC (permalink / raw)
To: alsa-devel
Cc: Marcin Juszkiewicz, Liam Girgwood, Luke Yelavich, Mark Brown,
Peter Robinson, Jordi Mallach
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
---
PandaBoard/FMAnalog | 46 +++++++++++++++++++++++++
PandaBoard/PandaBoard.conf | 45 +++++++++++++++++++++++++
PandaBoard/hifi | 83 ++++++++++++++++++++++++++++++++++++++++++++++
PandaBoard/hifiLP | 46 +++++++++++++++++++++++++
PandaBoard/record | 47 ++++++++++++++++++++++++++
PandaBoard/voice | 46 +++++++++++++++++++++++++
PandaBoard/voiceCall | 67 +++++++++++++++++++++++++++++++++++++
7 files changed, 380 insertions(+)
create mode 100644 PandaBoard/FMAnalog
create mode 100644 PandaBoard/PandaBoard.conf
create mode 100644 PandaBoard/hifi
create mode 100644 PandaBoard/hifiLP
create mode 100644 PandaBoard/record
create mode 100644 PandaBoard/voice
create mode 100644 PandaBoard/voiceCall
diff --git a/PandaBoard/FMAnalog b/PandaBoard/FMAnalog
new file mode 100644
index 0000000..f1b4477
--- /dev/null
+++ b/PandaBoard/FMAnalog
@@ -0,0 +1,46 @@
+# Use case Configurationfor TI PandaBoard HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='MUX_UL00' 9"
+ cset "name='MUX_UL01' 10"
+ cset "name='Capture Volume' 4"
+ ]
+
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='MUX_UL00' 0"
+ cset "name='MUX_UL01' 0"
+ cset "name='Capture Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ CapturePCM "hw:0,0"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoard 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Analog Left Capture Route' 2"
+ cset "name='Analog Right Capture Route' 2"
+ cset "name='Capture Preamplifier Volume' 2"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ ]
+}
+
diff --git a/PandaBoard/PandaBoard.conf b/PandaBoard/PandaBoard.conf
new file mode 100644
index 0000000..85b90b4
--- /dev/null
+++ b/PandaBoard/PandaBoard.conf
@@ -0,0 +1,45 @@
+# UCM configuration for PandaBoard
+SectionUseCase."Record" {
+ File "record"
+ Comment "Record."
+}
+
+SectionUseCase."HiFi" {
+ File "hifi"
+ Comment "Play HiFi quality Music."
+}
+
+SectionUseCase."HiFi_Low_Power" {
+ File "hifiLP"
+ Comment "Play HiFi quality Music in Low Power Mode."
+}
+
+SectionUseCase."Voice" {
+ File "voice"
+ Comment "Playback Voice quality."
+}
+
+SectionUseCase."Voice_Low_Power" {
+ File "voice"
+ Comment "Playback Voice quality in Low Power Mode."
+}
+
+SectionUseCase."Voice_Call" {
+ File "voiceCall"
+ Comment "Capture and Playback in Voice quality."
+}
+
+SectionUseCase."Voice_Call_IP" {
+ File "voiceCall"
+ Comment "Capture and Playback in Voice quality."
+}
+
+SectionUseCase."FM_Analog_Radio" {
+ File "FMAnalog"
+ Comment "Capture FM Analog Radio."
+}
+
+SectionDefaults [
+ cdev "hw:PandaBoard"
+ exec "echo Im setting defaults"
+]
diff --git a/PandaBoard/hifi b/PandaBoard/hifi
new file mode 100644
index 0000000..db405a4
--- /dev/null
+++ b/PandaBoard/hifi
@@ -0,0 +1,83 @@
+# Use case Configuration for TI PandaBoard HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='DL1 Mixer Multimedia' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Media Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='DL1 Mixer Multimedia' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Media Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+# Value {
+# TQ "Music"
+# PlaybackPCM "hw:0,0"
+# PlaybackVolume "name='DL1 Media Playback Volume' 90,90"
+# PlaybackSwitch "name='DL1 PDM Switch' 1"
+# }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoard 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
+
+#SectionModifier."RecordMedia".0 {
+# SupportedDevice [
+# "Headset"
+# ]
+ # EnableSequence [
+ # ....
+ # ]
+ #
+ # DisableSequence [
+ # ...
+ # ]
+ #
+ # TransitionSequence."ToModifierName" [
+ # ...
+ # ]
+ #
+ # # Optional TQ and ALSA PCMs
+ # Value {
+ # TQ Voice
+ # CapturePCM "hw:1"
+ # PlaybackVolume "name='Master Playback Volume',index=2"
+ # PlaybackSwitch "name='Master Playback Switch',index=2"
+ # }
+#
+#}
+
diff --git a/PandaBoard/hifiLP b/PandaBoard/hifiLP
new file mode 100644
index 0000000..7bbbd5d
--- /dev/null
+++ b/PandaBoard/hifiLP
@@ -0,0 +1,46 @@
+# Use case Configuration for TI PandaBoard HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='DL1 Mixer Multimedia' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Media Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='DL1 Mixer Multimedia' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Media Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ PlaybackPCM "hw:0,6"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoard 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
diff --git a/PandaBoard/record b/PandaBoard/record
new file mode 100644
index 0000000..0eaf117
--- /dev/null
+++ b/PandaBoard/record
@@ -0,0 +1,47 @@
+# Use case Configuration for TI PandaBoard HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ # No more AMIC PDM Switch in current kernels
+ #cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='MUX_UL00' 9"
+ cset "name='MUX_UL01' 10"
+ cset "name='Capture Volume' 4"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ # No more AMIC PDM Switch in current kernels
+ #cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='MUX_UL00' 0"
+ cset "name='MUX_UL01' 0"
+ cset "name='Capture Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ CapturePCM "hw:0,0"
+ }
+
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoard 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Analog Left Capture Route' 0"
+ cset "name='Analog Right Capture Route' 0"
+ cset "name='Capture Preamplifier Volume' 2"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ ]
+}
diff --git a/PandaBoard/voice b/PandaBoard/voice
new file mode 100644
index 0000000..4861071
--- /dev/null
+++ b/PandaBoard/voice
@@ -0,0 +1,46 @@
+# Use case Configuration for TI PandaBoard HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='DL1 Mixer Voice' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Voice Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='DL1 Mixer Voice' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Voice"
+ PlaybackPCM "hw:0,2"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoard 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
diff --git a/PandaBoard/voiceCall b/PandaBoard/voiceCall
new file mode 100644
index 0000000..d3c9501
--- /dev/null
+++ b/PandaBoard/voiceCall
@@ -0,0 +1,67 @@
+# Use case Configuration for TI PandaBoard HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='Sidetone Mixer Capture' 1"
+ cset "name='MUX_VX0' 9"
+ cset "name='MUX_VX1' 10"
+ cset "name='DL1 Mixer Voice' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Voice Playback Volume' 90,90"
+ cset "name='Capture Volume' 4"
+ cset "name='Capture Mixer Voice Capture' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='Sidetone Mixer Capture' 0"
+ cset "name='MUX_VX0' 0"
+ cset "name='MUX_VX1' 0"
+ cset "name='DL1 Mixer Voice' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='Capture Volume' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Voice"
+ CapturePCM "hw:0,2"
+ PlaybackPCM "hw:0,2"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoard 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Analog Left Capture Route' 0"
+ cset "name='Analog Right Capture Route' 0"
+ cset "name='Capture Preamplifier Volume' 2"
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoard"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
+
--
1.8.1.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 3/5] PandaBoardES: add UCM config from Ubuntu
2013-05-10 12:51 UCM profiles taken from Ubuntu Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 1/5] DAISY-I2S: add Samsung ARM Chromebook UCM config from ChromeOS Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 2/5] PandaBoard: add UCM config from Ubuntu Marcin Juszkiewicz
@ 2013-05-10 12:51 ` Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 4/5] SDP4430: " Marcin Juszkiewicz
` (2 subsequent siblings)
5 siblings, 0 replies; 15+ messages in thread
From: Marcin Juszkiewicz @ 2013-05-10 12:51 UTC (permalink / raw)
To: alsa-devel
Cc: Marcin Juszkiewicz, Liam Girgwood, Luke Yelavich, Mark Brown,
Peter Robinson, Jordi Mallach
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
---
PandaBoardES/FMAnalog | 46 +++++++++++++++++++++++
PandaBoardES/PandaBoardES.conf | 45 +++++++++++++++++++++++
PandaBoardES/hifi | 83 ++++++++++++++++++++++++++++++++++++++++++
PandaBoardES/hifiLP | 46 +++++++++++++++++++++++
PandaBoardES/record | 47 ++++++++++++++++++++++++
PandaBoardES/voice | 46 +++++++++++++++++++++++
PandaBoardES/voiceCall | 67 ++++++++++++++++++++++++++++++++++
7 files changed, 380 insertions(+)
create mode 100644 PandaBoardES/FMAnalog
create mode 100644 PandaBoardES/PandaBoardES.conf
create mode 100644 PandaBoardES/hifi
create mode 100644 PandaBoardES/hifiLP
create mode 100644 PandaBoardES/record
create mode 100644 PandaBoardES/voice
create mode 100644 PandaBoardES/voiceCall
diff --git a/PandaBoardES/FMAnalog b/PandaBoardES/FMAnalog
new file mode 100644
index 0000000..6885cc8
--- /dev/null
+++ b/PandaBoardES/FMAnalog
@@ -0,0 +1,46 @@
+# Use case Configurationfor TI PandaBoardES HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='MUX_UL00' 9"
+ cset "name='MUX_UL01' 10"
+ cset "name='Capture Volume' 4"
+ ]
+
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='MUX_UL00' 0"
+ cset "name='MUX_UL01' 0"
+ cset "name='Capture Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ CapturePCM "hw:0,0"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoardES 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Analog Left Capture Route' 2"
+ cset "name='Analog Right Capture Route' 2"
+ cset "name='Capture Preamplifier Volume' 2"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ ]
+}
+
diff --git a/PandaBoardES/PandaBoardES.conf b/PandaBoardES/PandaBoardES.conf
new file mode 100644
index 0000000..4fe6d0b
--- /dev/null
+++ b/PandaBoardES/PandaBoardES.conf
@@ -0,0 +1,45 @@
+# UCM configuration for PandaBoardES
+SectionUseCase."Record" {
+ File "record"
+ Comment "Record."
+}
+
+SectionUseCase."HiFi" {
+ File "hifi"
+ Comment "Play HiFi quality Music."
+}
+
+SectionUseCase."HiFi_Low_Power" {
+ File "hifiLP"
+ Comment "Play HiFi quality Music in Low Power Mode."
+}
+
+SectionUseCase."Voice" {
+ File "voice"
+ Comment "Playback Voice quality."
+}
+
+SectionUseCase."Voice_Low_Power" {
+ File "voice"
+ Comment "Playback Voice quality in Low Power Mode."
+}
+
+SectionUseCase."Voice_Call" {
+ File "voiceCall"
+ Comment "Capture and Playback in Voice quality."
+}
+
+SectionUseCase."Voice_Call_IP" {
+ File "voiceCall"
+ Comment "Capture and Playback in Voice quality."
+}
+
+SectionUseCase."FM_Analog_Radio" {
+ File "FMAnalog"
+ Comment "Capture FM Analog Radio."
+}
+
+SectionDefaults [
+ cdev "hw:PandaBoardES"
+ exec "echo Im setting PandaBoardES defaults"
+]
diff --git a/PandaBoardES/hifi b/PandaBoardES/hifi
new file mode 100644
index 0000000..be00e60
--- /dev/null
+++ b/PandaBoardES/hifi
@@ -0,0 +1,83 @@
+# Use case Configuration for TI PandaBoardES HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='DL1 Mixer Multimedia' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Media Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='DL1 Mixer Multimedia' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Media Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+# Value {
+# TQ "Music"
+# PlaybackPCM "hw:0,0"
+# PlaybackVolume "name='DL1 Media Playback Volume' 90,90"
+# PlaybackSwitch "name='DL1 PDM Switch' 1"
+# }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoardES 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
+
+#SectionModifier."RecordMedia".0 {
+# SupportedDevice [
+# "Headset"
+# ]
+ # EnableSequence [
+ # ....
+ # ]
+ #
+ # DisableSequence [
+ # ...
+ # ]
+ #
+ # TransitionSequence."ToModifierName" [
+ # ...
+ # ]
+ #
+ # # Optional TQ and ALSA PCMs
+ # Value {
+ # TQ Voice
+ # CapturePCM "hw:1"
+ # PlaybackVolume "name='Master Playback Volume',index=2"
+ # PlaybackSwitch "name='Master Playback Switch',index=2"
+ # }
+#
+#}
+
diff --git a/PandaBoardES/hifiLP b/PandaBoardES/hifiLP
new file mode 100644
index 0000000..c817a58
--- /dev/null
+++ b/PandaBoardES/hifiLP
@@ -0,0 +1,46 @@
+# Use case Configuration for TI PandaBoardES HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='DL1 Mixer Multimedia' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Media Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='DL1 Mixer Multimedia' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Media Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ PlaybackPCM "hw:0,6"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoardES 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
diff --git a/PandaBoardES/record b/PandaBoardES/record
new file mode 100644
index 0000000..4f272a9
--- /dev/null
+++ b/PandaBoardES/record
@@ -0,0 +1,47 @@
+# Use case Configuration for TI PandaBoardES HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ # No more AMIC PDM Switch in current kernels
+ #cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='MUX_UL00' 9"
+ cset "name='MUX_UL01' 10"
+ cset "name='Capture Volume' 4"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ # No more AMIC PDM Switch in current kernels
+ #cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='MUX_UL00' 0"
+ cset "name='MUX_UL01' 0"
+ cset "name='Capture Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ CapturePCM "hw:0,0"
+ }
+
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoardES 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Analog Left Capture Route' 0"
+ cset "name='Analog Right Capture Route' 0"
+ cset "name='Capture Preamplifier Volume' 2"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ ]
+}
diff --git a/PandaBoardES/voice b/PandaBoardES/voice
new file mode 100644
index 0000000..e2b3f79
--- /dev/null
+++ b/PandaBoardES/voice
@@ -0,0 +1,46 @@
+# Use case Configuration for TI PandaBoardES HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='DL1 Mixer Voice' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Voice Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='DL1 Mixer Voice' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Voice"
+ PlaybackPCM "hw:0,2"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoardES 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
diff --git a/PandaBoardES/voiceCall b/PandaBoardES/voiceCall
new file mode 100644
index 0000000..57b1c80
--- /dev/null
+++ b/PandaBoardES/voiceCall
@@ -0,0 +1,67 @@
+# Use case Configuration for TI PandaBoardES HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='Sidetone Mixer Capture' 1"
+ cset "name='MUX_VX0' 9"
+ cset "name='MUX_VX1' 10"
+ cset "name='DL1 Mixer Voice' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Voice Playback Volume' 90,90"
+ cset "name='Capture Volume' 4"
+ cset "name='Capture Mixer Voice Capture' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='Sidetone Mixer Capture' 0"
+ cset "name='MUX_VX0' 0"
+ cset "name='MUX_VX1' 0"
+ cset "name='DL1 Mixer Voice' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='Capture Volume' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Voice"
+ CapturePCM "hw:0,2"
+ PlaybackPCM "hw:0,2"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "PandaBoardES 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Analog Left Capture Route' 0"
+ cset "name='Analog Right Capture Route' 0"
+ cset "name='Capture Preamplifier Volume' 2"
+ cset "name='Headset Left Playback' 1"
+ cset "name='Headset Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:PandaBoardES"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ cset "name='Headset Right Playback' 0"
+ cset "name='Headset Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
+
--
1.8.1.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 4/5] SDP4430: add UCM config from Ubuntu
2013-05-10 12:51 UCM profiles taken from Ubuntu Marcin Juszkiewicz
` (2 preceding siblings ...)
2013-05-10 12:51 ` [PATCH 3/5] PandaBoardES: " Marcin Juszkiewicz
@ 2013-05-10 12:51 ` Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 5/5] tegraalc5632: " Marcin Juszkiewicz
2013-05-10 13:17 ` UCM profiles taken from Ubuntu Takashi Iwai
5 siblings, 0 replies; 15+ messages in thread
From: Marcin Juszkiewicz @ 2013-05-10 12:51 UTC (permalink / raw)
To: alsa-devel
Cc: Marcin Juszkiewicz, Liam Girgwood, Luke Yelavich, Mark Brown,
Peter Robinson, Jordi Mallach
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
---
SDP4430/FMAnalog | 46 +++++++++++++++++++++++++++++
SDP4430/SDP4430.conf | 45 ++++++++++++++++++++++++++++
SDP4430/hifi | 83 ++++++++++++++++++++++++++++++++++++++++++++++++++++
SDP4430/hifiLP | 46 +++++++++++++++++++++++++++++
SDP4430/record | 45 ++++++++++++++++++++++++++++
SDP4430/voice | 46 +++++++++++++++++++++++++++++
SDP4430/voiceCall | 67 ++++++++++++++++++++++++++++++++++++++++++
7 files changed, 378 insertions(+)
create mode 100644 SDP4430/FMAnalog
create mode 100644 SDP4430/SDP4430.conf
create mode 100644 SDP4430/hifi
create mode 100644 SDP4430/hifiLP
create mode 100644 SDP4430/record
create mode 100644 SDP4430/voice
create mode 100644 SDP4430/voiceCall
diff --git a/SDP4430/FMAnalog b/SDP4430/FMAnalog
new file mode 100644
index 0000000..876527a
--- /dev/null
+++ b/SDP4430/FMAnalog
@@ -0,0 +1,46 @@
+# Use case Configurationfor TI SDP4430 HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='MUX_UL00' 9"
+ cset "name='MUX_UL01' 10"
+ cset "name='Capture Volume' 4"
+ ]
+
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='MUX_UL00' 0"
+ cset "name='MUX_UL01' 0"
+ cset "name='Capture Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ CapturePCM "hw:0,0"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "SDP4430 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='Analog Left Capture Route' 2"
+ cset "name='Analog Right Capture Route' 2"
+ cset "name='Capture Preamplifier Volume' 2"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ ]
+}
+
diff --git a/SDP4430/SDP4430.conf b/SDP4430/SDP4430.conf
new file mode 100644
index 0000000..2fa2ab8
--- /dev/null
+++ b/SDP4430/SDP4430.conf
@@ -0,0 +1,45 @@
+# UCM configuration for SDP4430
+SectionUseCase."Record" {
+ File "record"
+ Comment "Record."
+}
+
+SectionUseCase."HiFi" {
+ File "hifi"
+ Comment "Play HiFi quality Music."
+}
+
+SectionUseCase."HiFi_Low_Power" {
+ File "hifiLP"
+ Comment "Play HiFi quality Music in Low Power Mode."
+}
+
+SectionUseCase."Voice" {
+ File "voice"
+ Comment "Playback Voice quality."
+}
+
+SectionUseCase."Voice_Low_Power" {
+ File "voice"
+ Comment "Playback Voice quality in Low Power Mode."
+}
+
+SectionUseCase."Voice_Call" {
+ File "voiceCall"
+ Comment "Capture and Playback in Voice quality."
+}
+
+SectionUseCase."Voice_Call_IP" {
+ File "voiceCall"
+ Comment "Capture and Playback in Voice quality."
+}
+
+SectionUseCase."FM_Analog_Radio" {
+ File "FMAnalog"
+ Comment "Capture FM Analog Radio."
+}
+
+SectionDefaults [
+ cdev "hw:SDP4430"
+ exec "echo Im setting defaults"
+]
diff --git a/SDP4430/hifi b/SDP4430/hifi
new file mode 100644
index 0000000..a3293c5
--- /dev/null
+++ b/SDP4430/hifi
@@ -0,0 +1,83 @@
+# Use case Configuration for TI SDP4430 HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='DL1 Mixer Multimedia' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Media Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+
+ cset "name='HS Left Playback' 1"
+ cset "name='HS Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='DL1 Mixer Multimedia' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Media Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+
+ cset "name='HS Right Playback' 0"
+ cset "name='HS Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+# Value {
+# TQ "Music"
+# PlaybackPCM "hw:0,0"
+# PlaybackVolume "name='DL1 Media Playback Volume' 90,90"
+# PlaybackSwitch "name='DL1 PDM Switch' 1"
+# }
+}
+
+SectionDevice."Headset".0 {
+ Comment "SDP4430 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='HS Left Playback' 1"
+ cset "name='HS Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='HS Right Playback' 0"
+ cset "name='HS Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
+
+#SectionModifier."RecordMedia".0 {
+# SupportedDevice [
+# "Headset"
+# ]
+ # EnableSequence [
+ # ....
+ # ]
+ #
+ # DisableSequence [
+ # ...
+ # ]
+ #
+ # TransitionSequence."ToModifierName" [
+ # ...
+ # ]
+ #
+ # # Optional TQ and ALSA PCMs
+ # Value {
+ # TQ Voice
+ # CapturePCM "hw:1"
+ # PlaybackVolume "name='Master Playback Volume',index=2"
+ # PlaybackSwitch "name='Master Playback Switch',index=2"
+ # }
+#
+#}
+
diff --git a/SDP4430/hifiLP b/SDP4430/hifiLP
new file mode 100644
index 0000000..ccf3d87
--- /dev/null
+++ b/SDP4430/hifiLP
@@ -0,0 +1,46 @@
+# Use case Configuration for TI SDP4430 HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='DL1 Mixer Multimedia' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Media Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='DL1 Mixer Multimedia' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Media Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ PlaybackPCM "hw:0,6"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "SDP4430 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='HS Left Playback' 1"
+ cset "name='HS Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='HS Right Playback' 0"
+ cset "name='HS Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
diff --git a/SDP4430/record b/SDP4430/record
new file mode 100644
index 0000000..d680f25
--- /dev/null
+++ b/SDP4430/record
@@ -0,0 +1,45 @@
+# Use case Configuration for TI SDP4430 HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='MUX_UL00' 9"
+ cset "name='MUX_UL01' 10"
+ cset "name='Capture Volume' 4"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='MUX_UL00' 0"
+ cset "name='MUX_UL01' 0"
+ cset "name='Capture Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Music"
+ CapturePCM "hw:0,0"
+ }
+
+}
+
+SectionDevice."Headset".0 {
+ Comment "SDP4430 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='Analog Left Capture Route' 0"
+ cset "name='Analog Right Capture Route' 0"
+ cset "name='Capture Preamplifier Volume' 2"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ ]
+}
diff --git a/SDP4430/voice b/SDP4430/voice
new file mode 100644
index 0000000..8bea89c
--- /dev/null
+++ b/SDP4430/voice
@@ -0,0 +1,46 @@
+# Use case Configuration for TI SDP4430 HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='DL1 Mixer Voice' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Voice Playback Volume' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='DL1 Mixer Voice' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Voice"
+ PlaybackPCM "hw:0,2"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "SDP4430 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='HS Left Playback' 1"
+ cset "name='HS Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='HS Right Playback' 0"
+ cset "name='HS Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
diff --git a/SDP4430/voiceCall b/SDP4430/voiceCall
new file mode 100644
index 0000000..4c06106
--- /dev/null
+++ b/SDP4430/voiceCall
@@ -0,0 +1,67 @@
+# Use case Configuration for TI SDP4430 HiFi Music
+# By Liam Girdwood <lrg@slimlogic.co.uk>
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='AMIC_UL PDM Switch' 1"
+ cset "name='Sidetone Mixer Capture' 1"
+ cset "name='MUX_VX0' 9"
+ cset "name='MUX_VX1' 10"
+ cset "name='DL1 Mixer Voice' 1"
+ cset "name='Sidetone Mixer Playback' 1"
+ cset "name='DL1 PDM Switch' 1"
+ cset "name='DL1 Voice Playback Volume' 90,90"
+ cset "name='Capture Volume' 4"
+ cset "name='Capture Mixer Voice Capture' 90,90"
+ cset "name='SDT DL Volume' 120"
+ ]
+
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='AMIC_UL PDM Switch' 0"
+ cset "name='Sidetone Mixer Capture' 0"
+ cset "name='MUX_VX0' 0"
+ cset "name='MUX_VX1' 0"
+ cset "name='DL1 Mixer Voice' 0"
+ cset "name='Sidetone Mixer Playback' 0"
+ cset "name='DL1 PDM Switch' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='Capture Volume' 0"
+ cset "name='DL1 Voice Playback Volume' 0,0"
+ cset "name='SDT DL Volume' 0"
+ ]
+
+ # Optional TQ and ALSA PCMs
+ Value {
+ TQ "Voice"
+ CapturePCM "hw:0,2"
+ PlaybackPCM "hw:0,2"
+ }
+}
+
+SectionDevice."Headset".0 {
+ Comment "SDP4430 3.5mm Headset"
+
+ EnableSequence [
+ cdev "hw:SDP4430"
+ cset "name='Analog Left Capture Route' 0"
+ cset "name='Analog Right Capture Route' 0"
+ cset "name='Capture Preamplifier Volume' 2"
+ cset "name='HS Left Playback' 1"
+ cset "name='HS Right Playback' 1"
+ cset "name='Headset Playback Volume' 13"
+ ]
+
+ DisableSequence [
+ cdev "hw:SDP4430"
+ cset "name='Analog Left Capture Route' 3"
+ cset "name='Analog Right Capture Route' 3"
+ cset "name='Capture Preamplifier Volume' 0"
+ cset "name='HS Right Playback' 0"
+ cset "name='HS Left Playback' 0"
+ cset "name='Headset Playback Volume' 0"
+ ]
+}
+
--
1.8.1.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH 5/5] tegraalc5632: add UCM config from Ubuntu
2013-05-10 12:51 UCM profiles taken from Ubuntu Marcin Juszkiewicz
` (3 preceding siblings ...)
2013-05-10 12:51 ` [PATCH 4/5] SDP4430: " Marcin Juszkiewicz
@ 2013-05-10 12:51 ` Marcin Juszkiewicz
2013-05-10 16:22 ` Stephen Warren
2013-05-10 13:17 ` UCM profiles taken from Ubuntu Takashi Iwai
5 siblings, 1 reply; 15+ messages in thread
From: Marcin Juszkiewicz @ 2013-05-10 12:51 UTC (permalink / raw)
To: alsa-devel
Cc: Marcin Juszkiewicz, Liam Girgwood, Luke Yelavich, Mark Brown,
Peter Robinson, Jordi Mallach
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
---
tegraalc5632/tegraalc5632.conf | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 tegraalc5632/tegraalc5632.conf
diff --git a/tegraalc5632/tegraalc5632.conf b/tegraalc5632/tegraalc5632.conf
new file mode 100644
index 0000000..958fade
--- /dev/null
+++ b/tegraalc5632/tegraalc5632.conf
@@ -0,0 +1,30 @@
+# UCM configuration for tegra-alc5632
+
+ValueDefaults {
+ PlaybackCTL "hw:0"
+ CaptureCTL "hw:0"
+}
+
+SectionDefaults [
+ exec "echo Im setting defaults for tegra-alc5632"
+ cdev "hw:tegraalc5632"
+ cset "name='Master Playback Switch' on"
+ cset "name='Master Playback Volume' 44,44"
+ cset "name='Headphone Playback Switch' on"
+ cset "name='Headphone Playback Volume' 21,21"
+ cset "name='Speaker Playback Switch' on"
+ cset "name='Speaker Playback Volume' 21,21"
+ cset "name='Speaker Mix DAC2SPK Playback Switch' on"
+ cset "name='SpeakerOut Mux' 2"
+ cset "name='SpeakerOut N Mux' LN/-R"
+ cset "name='AB-D Amp Mux' 0"
+ cset "name='HPL Mix DACL2HP Playback Switch' on"
+ cset "name='HPR Mix DACR2HP Playback Switch' on"
+ cset "name='Int Spk Switch' on"
+ cset "name='Left Headphone Mux' 1"
+ cset "name='Right Headphone Mux' 1"
+ cset "name='DMIC En Capture Switch' on"
+ cset "name='DMIC PreFilter Capture Switch' on"
+ cset "name='DMIC Boost Capture Volume' 4"
+ cset "name='Rec Capture Volume' 24"
+]
--
1.8.1.2
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: UCM profiles taken from Ubuntu
2013-05-10 12:51 UCM profiles taken from Ubuntu Marcin Juszkiewicz
` (4 preceding siblings ...)
2013-05-10 12:51 ` [PATCH 5/5] tegraalc5632: " Marcin Juszkiewicz
@ 2013-05-10 13:17 ` Takashi Iwai
[not found] ` <1368194214.15763.4.camel@penyagolosa.oskuro.net>
5 siblings, 1 reply; 15+ messages in thread
From: Takashi Iwai @ 2013-05-10 13:17 UTC (permalink / raw)
To: Marcin Juszkiewicz
Cc: alsa-devel, Liam Girgwood, Luke Yelavich, Mark Brown,
Peter Robinson, Jordi Mallach
At Fri, 10 May 2013 14:51:05 +0200,
Marcin Juszkiewicz wrote:
>
> When I bought Samsung ARM Chromebook few months ago I had no idea
> about UCM profiles and burnt speakers (left is dead, right is
> resting). Then I learnt, took ones from ChromeOS and added them into
> Ubuntu so other users will be a bit more safe.
>
> Later I had a discussion with some Debian, Ubuntu, Fedora developers
> about how to solve such problems and how to keep UCM profiles shared
> between distributions.
>
> Liam Girdwood pointed me to not used git tree at ALSA Project server
> and finally I reminded myself about it.
>
> The idea is to collect UCM profiles, keep them in one place and create
> alsa-ucm package in each distribution.
Would it make sense to put into alsa-lib.git? Since UCM itself was
already integrated into alsa-lib and there are already tons of
card-based config files in alsa-lib/src/conf/*, these also fit to a
similar directory there, I think.
They could be in a separate repo, but UCM config is coupled with UCM
code, so we may keep in the single repo.
thanks,
Takashi
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: UCM profiles taken from Ubuntu
[not found] ` <1368194214.15763.4.camel@penyagolosa.oskuro.net>
@ 2013-05-10 14:22 ` Liam Girdwood
2013-05-10 21:00 ` Mark Brown
0 siblings, 1 reply; 15+ messages in thread
From: Liam Girdwood @ 2013-05-10 14:22 UTC (permalink / raw)
Cc: alsa-devel, Luke Yelavich, Takashi Iwai, Marcin Juszkiewicz,
Mark Brown, Peter Robinson, Jordi Mallach
On Fri, 2013-05-10 at 15:56 +0200, Jordi Mallach wrote:
> El dv 10 de 05 de 2013 a les 15:17 +0200, en/na Takashi Iwai va
> escriure:
> > At Fri, 10 May 2013 14:51:05 +0200,
> > Marcin Juszkiewicz wrote:
> > >
> > > When I bought Samsung ARM Chromebook few months ago I had no idea
> > > about UCM profiles and burnt speakers (left is dead, right is
> > > resting). Then I learnt, took ones from ChromeOS and added them into
> > > Ubuntu so other users will be a bit more safe.
> > >
> > > Later I had a discussion with some Debian, Ubuntu, Fedora developers
> > > about how to solve such problems and how to keep UCM profiles shared
> > > between distributions.
> > >
> > > Liam Girdwood pointed me to not used git tree at ALSA Project server
> > > and finally I reminded myself about it.
> > >
> > > The idea is to collect UCM profiles, keep them in one place and create
> > > alsa-ucm package in each distribution.
>
> Thanks Marcin! This part of the Debian←→Ubuntu delta was something I
> wanted to bring up with upstream after the wheezy release.
>
I'll echo that thought, many thanks Marcin !
> > Would it make sense to put into alsa-lib.git? Since UCM itself was
> > already integrated into alsa-lib and there are already tons of
> > card-based config files in alsa-lib/src/conf/*, these also fit to a
> > similar directory there, I think.
> >
> > They could be in a separate repo, but UCM config is coupled with UCM
> > code, so we may keep in the single repo.
>
> It makes sense to me, fwiw.
>
Agreed, the initial intention of the separate repo was to do frequent
releases that would be likely out of sync alsa-lib. But I think
combining is the best way forward now. Takashi, please feel free to
remove the other repo (I think it's mostly empty anyway).
Liam
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/5] tegraalc5632: add UCM config from Ubuntu
2013-05-10 12:51 ` [PATCH 5/5] tegraalc5632: " Marcin Juszkiewicz
@ 2013-05-10 16:22 ` Stephen Warren
2013-05-10 20:53 ` Mark Brown
0 siblings, 1 reply; 15+ messages in thread
From: Stephen Warren @ 2013-05-10 16:22 UTC (permalink / raw)
To: Marcin Juszkiewicz
Cc: alsa-devel, Liam Girgwood, Luke Yelavich, Mark Brown,
Peter Robinson, Jordi Mallach
On 05/10/2013 06:51 AM, Marcin Juszkiewicz wrote:
> Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
> ---
> tegraalc5632/tegraalc5632.conf | 30 ++++++++++++++++++++++++++++++
I'm not sure that's the correct name for this file.
"alc5632" is the name of the audio CODEC, which could be used in a
variety of different boards, each of which might require a different UCM
configuration. Shouldn't the file be named based on the board name. At
least with upstream kernels, the device tree contains:
nvidia,model = "Compal PAZ00";
which should influence the name the kernel gives to the sound card, and
hence I think be the name the UCM config is looked up under?
> + exec "echo Im setting defaults for tegra-alc5632"
I'm not sure if that's useful?
I also notice that this file doesn't define any use-cases/verbs/...
Presumably a Linux-based OS would expect a certain set of them to exist,
and they'd be implemented/named consistently across all UCM configs?
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/5] tegraalc5632: add UCM config from Ubuntu
2013-05-10 16:22 ` Stephen Warren
@ 2013-05-10 20:53 ` Mark Brown
2013-05-11 14:15 ` [PATCH 5/5] tegraalc5632: add UCM config fromUbuntu Marc Dietrich
0 siblings, 1 reply; 15+ messages in thread
From: Mark Brown @ 2013-05-10 20:53 UTC (permalink / raw)
To: Stephen Warren
Cc: alsa-devel, Marcin Juszkiewicz, Liam Girgwood, Luke Yelavich,
Peter Robinson, Jordi Mallach
[-- Attachment #1.1: Type: text/plain, Size: 780 bytes --]
On Fri, May 10, 2013 at 10:22:59AM -0600, Stephen Warren wrote:
> "alc5632" is the name of the audio CODEC, which could be used in a
> variety of different boards, each of which might require a different UCM
> configuration. Shouldn't the file be named based on the board name. At
Yes, it should.
> I also notice that this file doesn't define any use-cases/verbs/...
> Presumably a Linux-based OS would expect a certain set of them to exist,
> and they'd be implemented/named consistently across all UCM configs?
I'd expect them to at least fall back to assuming some default thing is
available - having a model that is more "do I need to do something
special for this mode". Being able to give at least some basic
functionality from a minimal starting point seems sensible.
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: UCM profiles taken from Ubuntu
2013-05-10 14:22 ` Liam Girdwood
@ 2013-05-10 21:00 ` Mark Brown
2013-05-14 16:14 ` Takashi Iwai
0 siblings, 1 reply; 15+ messages in thread
From: Mark Brown @ 2013-05-10 21:00 UTC (permalink / raw)
To: Liam Girdwood
Cc: alsa-devel, Marcin Juszkiewicz, Luke Yelavich, Peter Robinson,
Takashi Iwai, Jordi Mallach
[-- Attachment #1.1: Type: text/plain, Size: 559 bytes --]
On Fri, May 10, 2013 at 03:22:21PM +0100, Liam Girdwood wrote:
> On Fri, 2013-05-10 at 15:56 +0200, Jordi Mallach wrote:
> > > They could be in a separate repo, but UCM config is coupled with UCM
> > > code, so we may keep in the single repo.
> > It makes sense to me, fwiw.
> Agreed, the initial intention of the separate repo was to do frequent
> releases that would be likely out of sync alsa-lib. But I think
> combining is the best way forward now. Takashi, please feel free to
> remove the other repo (I think it's mostly empty anyway).
Definitely.
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/5] tegraalc5632: add UCM config fromUbuntu
2013-05-10 20:53 ` Mark Brown
@ 2013-05-11 14:15 ` Marc Dietrich
2013-05-11 14:26 ` Mark Brown
0 siblings, 1 reply; 15+ messages in thread
From: Marc Dietrich @ 2013-05-11 14:15 UTC (permalink / raw)
To: alsa-devel
Cc: Stephen Warren, Marcin Juszkiewicz, Liam Girgwood, Luke Yelavich,
Mark Brown, Peter Robinson, Andrey Danin, Leon Romanovsky,
Jordi Mallach
Hi,
On Friday 10 May 2013 21:53:30 Mark Brown wrote:
> On Fri, May 10, 2013 at 10:22:59AM -0600, Stephen Warren wrote:
> > "alc5632" is the name of the audio CODEC, which could be used in a
> > variety of different boards, each of which might require a different UCM
> > configuration. Shouldn't the file be named based on the board name. At
>
> Yes, it should.
I like to help out, but I'm also unfamiliar with UCM profiles. This
configuation belong to the AC100 netboot (board name paz00) and a single hifi
use case would be sufficient for now. http://www.alsa-
project.org/main/index.php/Use_Case_Manager doesn't give much info. Andrey,
Leon, any idea?
Marc
>
> > I also notice that this file doesn't define any use-cases/verbs/...
> > Presumably a Linux-based OS would expect a certain set of them to exist,
> > and they'd be implemented/named consistently across all UCM configs?
>
> I'd expect them to at least fall back to assuming some default thing is
> available - having a model that is more "do I need to do something
> special for this mode". Being able to give at least some basic
> functionality from a minimal starting point seems sensible.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/5] tegraalc5632: add UCM config fromUbuntu
2013-05-11 14:15 ` [PATCH 5/5] tegraalc5632: add UCM config fromUbuntu Marc Dietrich
@ 2013-05-11 14:26 ` Mark Brown
2013-05-11 16:41 ` Leon Romanovsky
0 siblings, 1 reply; 15+ messages in thread
From: Mark Brown @ 2013-05-11 14:26 UTC (permalink / raw)
To: Marc Dietrich
Cc: alsa-devel, Stephen Warren, Marcin Juszkiewicz, Liam Girgwood,
Luke Yelavich, Peter Robinson, Andrey Danin, Leon Romanovsky,
Jordi Mallach
[-- Attachment #1.1: Type: text/plain, Size: 726 bytes --]
On Sat, May 11, 2013 at 04:15:49PM +0200, Marc Dietrich wrote:
> I like to help out, but I'm also unfamiliar with UCM profiles. This
> configuation belong to the AC100 netboot (board name paz00) and a single hifi
> use case would be sufficient for now. http://www.alsa-
> project.org/main/index.php/Use_Case_Manager doesn't give much info. Andrey,
> Leon, any idea?
The examples Marcin posted are pretty good to refer to. The main thing
that's likely to be useful if the boards have multiple audio inputs or
outputs is to add support for them - for a "computer" type form factor
(as opposed to phone type form factor) there's probably not going to be
huge variation between use cases out of the box anyway.
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 5/5] tegraalc5632: add UCM config fromUbuntu
2013-05-11 14:26 ` Mark Brown
@ 2013-05-11 16:41 ` Leon Romanovsky
0 siblings, 0 replies; 15+ messages in thread
From: Leon Romanovsky @ 2013-05-11 16:41 UTC (permalink / raw)
To: Marc Dietrich, alsa-devel, Stephen Warren, Marcin Juszkiewicz,
Liam Girgwood, Luke Yelavich, Peter Robinson, Jordi Mallach,
Leon Romanovsky, Andrey Danin
On Sat, May 11, 2013 at 5:26 PM, Mark Brown <broonie@kernel.org> wrote:
> On Sat, May 11, 2013 at 04:15:49PM +0200, Marc Dietrich wrote:
>
>> I like to help out, but I'm also unfamiliar with UCM profiles. This
>> configuation belong to the AC100 netboot (board name paz00) and a single hifi
>> use case would be sufficient for now. http://www.alsa-
>> project.org/main/index.php/Use_Case_Manager doesn't give much info. Andrey,
>> Leon, any idea?
I would be happy to help, but I know nothing about UCM.
--
Leon Romanovsky | Independent Linux Consultant
www.leon.nu | leon@leon.nu
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: UCM profiles taken from Ubuntu
2013-05-10 21:00 ` Mark Brown
@ 2013-05-14 16:14 ` Takashi Iwai
0 siblings, 0 replies; 15+ messages in thread
From: Takashi Iwai @ 2013-05-14 16:14 UTC (permalink / raw)
To: Mark Brown
Cc: alsa-devel, Marcin Juszkiewicz, Liam Girdwood, Luke Yelavich,
Peter Robinson, Jordi Mallach
At Fri, 10 May 2013 22:00:06 +0100,
Mark Brown wrote:
>
> On Fri, May 10, 2013 at 03:22:21PM +0100, Liam Girdwood wrote:
> > On Fri, 2013-05-10 at 15:56 +0200, Jordi Mallach wrote:
>
> > > > They could be in a separate repo, but UCM config is coupled with UCM
> > > > code, so we may keep in the single repo.
>
> > > It makes sense to me, fwiw.
>
> > Agreed, the initial intention of the separate repo was to do frequent
> > releases that would be likely out of sync alsa-lib. But I think
> > combining is the best way forward now. Takashi, please feel free to
> > remove the other repo (I think it's mostly empty anyway).
>
> Definitely.
Alright. I merged patches and put the stuff in src/conf/ucm/*.
Please check alsa-lib git tree later whether it's OK.
thanks,
Takashi
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2013-05-14 16:15 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-10 12:51 UCM profiles taken from Ubuntu Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 1/5] DAISY-I2S: add Samsung ARM Chromebook UCM config from ChromeOS Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 2/5] PandaBoard: add UCM config from Ubuntu Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 3/5] PandaBoardES: " Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 4/5] SDP4430: " Marcin Juszkiewicz
2013-05-10 12:51 ` [PATCH 5/5] tegraalc5632: " Marcin Juszkiewicz
2013-05-10 16:22 ` Stephen Warren
2013-05-10 20:53 ` Mark Brown
2013-05-11 14:15 ` [PATCH 5/5] tegraalc5632: add UCM config fromUbuntu Marc Dietrich
2013-05-11 14:26 ` Mark Brown
2013-05-11 16:41 ` Leon Romanovsky
2013-05-10 13:17 ` UCM profiles taken from Ubuntu Takashi Iwai
[not found] ` <1368194214.15763.4.camel@penyagolosa.oskuro.net>
2013-05-10 14:22 ` Liam Girdwood
2013-05-10 21:00 ` Mark Brown
2013-05-14 16:14 ` Takashi Iwai
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.