* [PATCH 2/4] powerpc/perf: increase the perf HW events to 6
2013-06-05 16:17 [PATCH 1/4] powerpc/perf: correct typos in counter enumeration Lijun Pan
@ 2013-06-05 16:17 ` Lijun Pan
2013-06-05 16:17 ` [PATCH 3/4] powerpc/perf: add 2 additional performance monitor counters for e6500 core Lijun Pan
2013-06-05 16:17 ` [PATCH 4/4] powerpc/perf: Add e6500 PMU driver Lijun Pan
2 siblings, 0 replies; 6+ messages in thread
From: Lijun Pan @ 2013-06-05 16:17 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Lijun.Pan, Catalin Udma
From: Catalin Udma <catalin.udma@freescale.com>
This change is required after the e6500 perf support has been added.
There are 6 counters in e6500 core instead of 4 in e500 core and
the MAX_HWEVENTS counter should be changed accordingly from 4 to 6.
Added also runtime check for counters overflow.
Signed-off-by: Catalin Udma <catalin.udma@freescale.com>
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
---
arch/powerpc/include/asm/perf_event_fsl_emb.h | 2 +-
arch/powerpc/perf/core-fsl-emb.c | 6 ++++++
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/perf_event_fsl_emb.h b/arch/powerpc/include/asm/perf_event_fsl_emb.h
index 718a9fa..a581654 100644
--- a/arch/powerpc/include/asm/perf_event_fsl_emb.h
+++ b/arch/powerpc/include/asm/perf_event_fsl_emb.h
@@ -13,7 +13,7 @@
#include <linux/types.h>
#include <asm/hw_irq.h>
-#define MAX_HWEVENTS 4
+#define MAX_HWEVENTS 6
/* event flags */
#define FSL_EMB_EVENT_VALID 1
diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index 106c533..0b13f74 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -462,6 +462,12 @@ static int fsl_emb_pmu_event_init(struct perf_event *event)
int num_restricted;
int i;
+ if (ppmu->n_counter > MAX_HWEVENTS) {
+ WARN(1, "No. of perf counters (%d) is higher than max array size(%d)\n",
+ ppmu->n_counter, MAX_HWEVENTS);
+ ppmu->n_counter = MAX_HWEVENTS;
+ }
+
switch (event->attr.type) {
case PERF_TYPE_HARDWARE:
ev = event->attr.config;
--
1.7.9.7
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 3/4] powerpc/perf: add 2 additional performance monitor counters for e6500 core
2013-06-05 16:17 [PATCH 1/4] powerpc/perf: correct typos in counter enumeration Lijun Pan
2013-06-05 16:17 ` [PATCH 2/4] powerpc/perf: increase the perf HW events to 6 Lijun Pan
@ 2013-06-05 16:17 ` Lijun Pan
2013-06-05 16:17 ` [PATCH 4/4] powerpc/perf: Add e6500 PMU driver Lijun Pan
2 siblings, 0 replies; 6+ messages in thread
From: Lijun Pan @ 2013-06-05 16:17 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Lijun.Pan
There are 6 counters in e6500 core instead of 4 in e500 core.
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
---
arch/powerpc/include/asm/reg_fsl_emb.h | 12 ++++++++++++
arch/powerpc/kernel/cputable.c | 2 +-
arch/powerpc/oprofile/op_model_fsl_emb.c | 30 ++++++++++++++++++++++++++++++
arch/powerpc/perf/core-fsl-emb.c | 24 ++++++++++++++++++++++++
4 files changed, 67 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1cf8ab0..c51d52e 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -19,10 +19,14 @@
#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
#define PMRN_PMC2 0x012 /* Performance Monitor Counter 2 */
#define PMRN_PMC3 0x013 /* Performance Monitor Counter 3 */
+#define PMRN_PMC4 0x014 /* Performance Monitor Counter 4 */
+#define PMRN_PMC5 0x015 /* Performance Monitor Counter 5 */
#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
+#define PMRN_PMLCA4 0x094 /* PM Local Control A4 */
+#define PMRN_PMLCA5 0x095 /* PM Local Control A5 */
#define PMLCA_FC 0x80000000 /* Freeze Counter */
#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
@@ -38,6 +42,8 @@
#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
+#define PMRN_PMLCB4 0x114 /* PM Local Control B4 */
+#define PMRN_PMLCB5 0x115 /* PM Local Control B5 */
#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */
#define PMLCB_THRESHMUL_SHIFT 8
@@ -57,14 +63,20 @@
#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 2 */
#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 3 */
+#define PMRN_UPMC4 0x004 /* User Performance Monitor Counter 4 */
+#define PMRN_UPMC5 0x005 /* User Performance Monitor Counter 5 */
#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
+#define PMRN_UPMLCA4 0x084 /* User PM Local Control A4 */
+#define PMRN_UPMLCA5 0x085 /* User PM Local Control A5 */
#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
+#define PMRN_UPMLCB4 0x104 /* User PM Local Control B4 */
+#define PMRN_UPMLCB5 0x105 /* User PM Local Control B5 */
#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cc39139..2d4eee2 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2073,7 +2073,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
.dcache_bsize = 64,
- .num_pmcs = 4,
+ .num_pmcs = 6,
.oprofile_cpu_type = "ppc/e6500",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.cpu_setup = __setup_cpu_e6500,
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
index ccc1daa..2a82d3e 100644
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ b/arch/powerpc/oprofile/op_model_fsl_emb.c
@@ -46,6 +46,12 @@ static inline u32 get_pmlca(int ctr)
case 3:
pmlca = mfpmr(PMRN_PMLCA3);
break;
+ case 4:
+ pmlca = mfpmr(PMRN_PMLCA4);
+ break;
+ case 5:
+ pmlca = mfpmr(PMRN_PMLCA5);
+ break;
default:
panic("Bad ctr number\n");
}
@@ -68,6 +74,12 @@ static inline void set_pmlca(int ctr, u32 pmlca)
case 3:
mtpmr(PMRN_PMLCA3, pmlca);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, pmlca);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, pmlca);
+ break;
default:
panic("Bad ctr number\n");
}
@@ -84,6 +96,10 @@ static inline unsigned int ctr_read(unsigned int i)
return mfpmr(PMRN_PMC2);
case 3:
return mfpmr(PMRN_PMC3);
+ case 4:
+ return mfpmr(PMRN_PMC4);
+ case 5:
+ return mfpmr(PMRN_PMC5);
default:
return 0;
}
@@ -104,6 +120,12 @@ static inline void ctr_write(unsigned int i, unsigned int val)
case 3:
mtpmr(PMRN_PMC3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMC4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMC5, val);
+ break;
default:
break;
}
@@ -133,6 +155,14 @@ static void init_pmc_stop(int ctr)
mtpmr(PMRN_PMLCA3, pmlca);
mtpmr(PMRN_PMLCB3, pmlcb);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, pmlca);
+ mtpmr(PMRN_PMLCB4, pmlcb);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, pmlca);
+ mtpmr(PMRN_PMLCB5, pmlcb);
+ break;
default:
panic("Bad ctr number!\n");
}
diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index 0b13f74..d35ae52 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -70,6 +70,12 @@ static unsigned long read_pmc(int idx)
case 3:
val = mfpmr(PMRN_PMC3);
break;
+ case 4:
+ val = mfpmr(PMRN_PMC4);
+ break;
+ case 5:
+ val = mfpmr(PMRN_PMC5);
+ break;
default:
printk(KERN_ERR "oops trying to read PMC%d\n", idx);
val = 0;
@@ -95,6 +101,12 @@ static void write_pmc(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMC3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMC4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMC5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMC%d\n", idx);
}
@@ -120,6 +132,12 @@ static void write_pmlca(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMLCA3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
}
@@ -145,6 +163,12 @@ static void write_pmlcb(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMLCB3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMLCB4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCB5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
}
--
1.7.9.7
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 4/4] powerpc/perf: Add e6500 PMU driver
2013-06-05 16:17 [PATCH 1/4] powerpc/perf: correct typos in counter enumeration Lijun Pan
2013-06-05 16:17 ` [PATCH 2/4] powerpc/perf: increase the perf HW events to 6 Lijun Pan
2013-06-05 16:17 ` [PATCH 3/4] powerpc/perf: add 2 additional performance monitor counters for e6500 core Lijun Pan
@ 2013-06-05 16:17 ` Lijun Pan
2 siblings, 0 replies; 6+ messages in thread
From: Lijun Pan @ 2013-06-05 16:17 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Lijun.Pan, Poonam Aggrwal, Priyanka Jain
e6500 core performance monitors has the following features:
- 6 performance monitor counters
- 512 events supported
- no threshold events
e6500 PMU has more specific events (Data L1 cache misses, Instruction L1
cache misses, etc ) than e500 PMU (which only had Data L1 cache reloads,
etc). Where available, the more specific events have been used which will
produce slightly different results than e500 PMU equivalents.
Based on work done by Priyanka Jain
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <Poonam.Aggrwal@freescale.com>
---
arch/powerpc/include/asm/reg_fsl_emb.h | 4 +-
arch/powerpc/perf/Makefile | 2 +-
arch/powerpc/perf/e6500-pmu.c | 120 ++++++++++++++++++++++++++++++++
3 files changed, 124 insertions(+), 2 deletions(-)
create mode 100644 arch/powerpc/perf/e6500-pmu.c
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index c51d52e..0e3ddf5 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -34,8 +34,10 @@
#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
#define PMLCA_CE 0x04000000 /* Condition Enable */
+#define PMLCA_FGCS1 0x00000002 /* Freeze in guest state */
+#define PMLCA_FGCS0 0x00000001 /* Freeze in hypervisor state */
-#define PMLCA_EVENT_MASK 0x00ff0000 /* Event field */
+#define PMLCA_EVENT_MASK 0x01ff0000 /* Event field */
#define PMLCA_EVENT_SHIFT 16
#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile
index af3fac2..06dd8d5 100644
--- a/arch/powerpc/perf/Makefile
+++ b/arch/powerpc/perf/Makefile
@@ -8,7 +8,7 @@ obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \
obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o
obj-$(CONFIG_FSL_EMB_PERF_EVENT) += core-fsl-emb.o
-obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o
+obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o e6500-pmu.o
obj-$(CONFIG_PPC64) += $(obj64-y)
obj-$(CONFIG_PPC32) += $(obj32-y)
diff --git a/arch/powerpc/perf/e6500-pmu.c b/arch/powerpc/perf/e6500-pmu.c
new file mode 100644
index 0000000..e38ed1f
--- /dev/null
+++ b/arch/powerpc/perf/e6500-pmu.c
@@ -0,0 +1,120 @@
+/*
+ * Performance counter support for e6500 family processors.
+ *
+ * Based on e500-pmu.c
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <asm/reg.h>
+#include <asm/cputable.h>
+
+/*
+ * Map of generic hardware event types to hardware events
+ * Zero if unsupported
+ */
+static int e6500_generic_events[] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = 1,
+ [PERF_COUNT_HW_INSTRUCTIONS] = 2,
+ [PERF_COUNT_HW_CACHE_MISSES] = 221,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
+ [PERF_COUNT_HW_BRANCH_MISSES] = 15,
+};
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int e6500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+ [C(L1D)] = {
+ /*RESULT_ACCESS RESULT_MISS */
+ [C(OP_READ)] = { 27, 222 },
+ [C(OP_WRITE)] = { 28, 223 },
+ [C(OP_PREFETCH)] = { 29, 0 },
+ },
+ [C(L1I)] = {
+ /*RESULT_ACCESS RESULT_MISS */
+ [C(OP_READ)] = { 2, 254 },
+ [C(OP_WRITE)] = { -1, -1 },
+ [C(OP_PREFETCH)] = { 37, 0 },
+ },
+ /*
+ * Assuming LL means L2, it's not a good match for this model.
+ * It does not have separate read/write events (but it does have
+ * separate instruction/data events).
+ */
+ [C(LL)] = {
+ /*RESULT_ACCESS RESULT_MISS */
+ [C(OP_READ)] = { 0, 0 },
+ [C(OP_WRITE)] = { 0, 0 },
+ [C(OP_PREFETCH)] = { 0, 0 },
+ },
+ /*
+ * There are data/instruction MMU misses, but that's a miss on
+ * the chip's internal level-one TLB which is probably not
+ * what the user wants. Instead, unified level-two TLB misses
+ * are reported here.
+ */
+ [C(DTLB)] = {
+ /*RESULT_ACCESS RESULT_MISS */
+ [C(OP_READ)] = { 26, 66 },
+ [C(OP_WRITE)] = { -1, -1 },
+ [C(OP_PREFETCH)] = { -1, -1 },
+ },
+ [C(BPU)] = {
+ /*RESULT_ACCESS RESULT_MISS */
+ [C(OP_READ)] = { 12, 15 },
+ [C(OP_WRITE)] = { -1, -1 },
+ [C(OP_PREFETCH)] = { -1, -1 },
+ },
+ [C(NODE)] = {
+ /* RESULT_ACCESS RESULT_MISS */
+ [C(OP_READ)] = { -1, -1 },
+ [C(OP_WRITE)] = { -1, -1 },
+ [C(OP_PREFETCH)] = { -1, -1 },
+ },
+};
+
+static int num_events = 512;
+
+/* Upper half of event id is PMLCb, for threshold events */
+static u64 e6500_xlate_event(u64 event_id)
+{
+ u32 event_low = (u32)event_id;
+ if (event_low >= num_events ||
+ (event_id & (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)))
+ return 0;
+
+ return FSL_EMB_EVENT_VALID;
+}
+
+static struct fsl_emb_pmu e6500_pmu = {
+ .name = "e6500 family",
+ .n_counter = 6,
+ .n_restricted = 0,
+ .xlate_event = e6500_xlate_event,
+ .n_generic = ARRAY_SIZE(e6500_generic_events),
+ .generic_events = e6500_generic_events,
+ .cache_events = &e6500_cache_events,
+};
+
+static int init_e6500_pmu(void)
+{
+ if (!cur_cpu_spec->oprofile_cpu_type ||
+ strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e6500"))
+ return -ENODEV;
+
+ return register_fsl_emb_pmu(&e6500_pmu);
+}
+
+early_initcall(init_e6500_pmu);
--
1.7.9.7
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/4] powerpc/perf: add 2 additional performance monitor counters for e6500 core
2013-06-05 20:01 [PATCH 1/4] powerpc/perf: correct typos in counter enumeration Lijun Pan
@ 2013-06-05 20:01 ` Lijun Pan
0 siblings, 0 replies; 6+ messages in thread
From: Lijun Pan @ 2013-06-05 20:01 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Lijun.Pan
There are 6 counters in e6500 core instead of 4 in e500 core.
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
---
arch/powerpc/include/asm/reg_fsl_emb.h | 12 ++++++++++++
arch/powerpc/kernel/cputable.c | 2 +-
arch/powerpc/oprofile/op_model_fsl_emb.c | 30 ++++++++++++++++++++++++++++++
arch/powerpc/perf/core-fsl-emb.c | 24 ++++++++++++++++++++++++
4 files changed, 67 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1cf8ab0..c51d52e 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -19,10 +19,14 @@
#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
#define PMRN_PMC2 0x012 /* Performance Monitor Counter 2 */
#define PMRN_PMC3 0x013 /* Performance Monitor Counter 3 */
+#define PMRN_PMC4 0x014 /* Performance Monitor Counter 4 */
+#define PMRN_PMC5 0x015 /* Performance Monitor Counter 5 */
#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
+#define PMRN_PMLCA4 0x094 /* PM Local Control A4 */
+#define PMRN_PMLCA5 0x095 /* PM Local Control A5 */
#define PMLCA_FC 0x80000000 /* Freeze Counter */
#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
@@ -38,6 +42,8 @@
#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
+#define PMRN_PMLCB4 0x114 /* PM Local Control B4 */
+#define PMRN_PMLCB5 0x115 /* PM Local Control B5 */
#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */
#define PMLCB_THRESHMUL_SHIFT 8
@@ -57,14 +63,20 @@
#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 2 */
#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 3 */
+#define PMRN_UPMC4 0x004 /* User Performance Monitor Counter 4 */
+#define PMRN_UPMC5 0x005 /* User Performance Monitor Counter 5 */
#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
+#define PMRN_UPMLCA4 0x084 /* User PM Local Control A4 */
+#define PMRN_UPMLCA5 0x085 /* User PM Local Control A5 */
#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
+#define PMRN_UPMLCB4 0x104 /* User PM Local Control B4 */
+#define PMRN_UPMLCB5 0x105 /* User PM Local Control B5 */
#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cc39139..2d4eee2 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2073,7 +2073,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
.dcache_bsize = 64,
- .num_pmcs = 4,
+ .num_pmcs = 6,
.oprofile_cpu_type = "ppc/e6500",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.cpu_setup = __setup_cpu_e6500,
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
index ccc1daa..2a82d3e 100644
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ b/arch/powerpc/oprofile/op_model_fsl_emb.c
@@ -46,6 +46,12 @@ static inline u32 get_pmlca(int ctr)
case 3:
pmlca = mfpmr(PMRN_PMLCA3);
break;
+ case 4:
+ pmlca = mfpmr(PMRN_PMLCA4);
+ break;
+ case 5:
+ pmlca = mfpmr(PMRN_PMLCA5);
+ break;
default:
panic("Bad ctr number\n");
}
@@ -68,6 +74,12 @@ static inline void set_pmlca(int ctr, u32 pmlca)
case 3:
mtpmr(PMRN_PMLCA3, pmlca);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, pmlca);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, pmlca);
+ break;
default:
panic("Bad ctr number\n");
}
@@ -84,6 +96,10 @@ static inline unsigned int ctr_read(unsigned int i)
return mfpmr(PMRN_PMC2);
case 3:
return mfpmr(PMRN_PMC3);
+ case 4:
+ return mfpmr(PMRN_PMC4);
+ case 5:
+ return mfpmr(PMRN_PMC5);
default:
return 0;
}
@@ -104,6 +120,12 @@ static inline void ctr_write(unsigned int i, unsigned int val)
case 3:
mtpmr(PMRN_PMC3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMC4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMC5, val);
+ break;
default:
break;
}
@@ -133,6 +155,14 @@ static void init_pmc_stop(int ctr)
mtpmr(PMRN_PMLCA3, pmlca);
mtpmr(PMRN_PMLCB3, pmlcb);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, pmlca);
+ mtpmr(PMRN_PMLCB4, pmlcb);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, pmlca);
+ mtpmr(PMRN_PMLCB5, pmlcb);
+ break;
default:
panic("Bad ctr number!\n");
}
diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index 0b13f74..d35ae52 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -70,6 +70,12 @@ static unsigned long read_pmc(int idx)
case 3:
val = mfpmr(PMRN_PMC3);
break;
+ case 4:
+ val = mfpmr(PMRN_PMC4);
+ break;
+ case 5:
+ val = mfpmr(PMRN_PMC5);
+ break;
default:
printk(KERN_ERR "oops trying to read PMC%d\n", idx);
val = 0;
@@ -95,6 +101,12 @@ static void write_pmc(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMC3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMC4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMC5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMC%d\n", idx);
}
@@ -120,6 +132,12 @@ static void write_pmlca(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMLCA3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
}
@@ -145,6 +163,12 @@ static void write_pmlcb(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMLCB3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMLCB4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCB5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
}
--
1.7.9.7
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/4] powerpc/perf: add 2 additional performance monitor counters for e6500 core
2013-06-05 20:22 [PATCH 1/4] powerpc/perf: correct typos in counter enumeration Lijun Pan
@ 2013-06-05 20:22 ` Lijun Pan
0 siblings, 0 replies; 6+ messages in thread
From: Lijun Pan @ 2013-06-05 20:22 UTC (permalink / raw)
To: linuxppc-dev; +Cc: Lijun.Pan
There are 6 counters in e6500 core instead of 4 in e500 core.
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
---
arch/powerpc/include/asm/reg_fsl_emb.h | 12 ++++++++++++
arch/powerpc/kernel/cputable.c | 2 +-
arch/powerpc/oprofile/op_model_fsl_emb.c | 30 ++++++++++++++++++++++++++++++
arch/powerpc/perf/core-fsl-emb.c | 24 ++++++++++++++++++++++++
4 files changed, 67 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1cf8ab0..c51d52e 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -19,10 +19,14 @@
#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
#define PMRN_PMC2 0x012 /* Performance Monitor Counter 2 */
#define PMRN_PMC3 0x013 /* Performance Monitor Counter 3 */
+#define PMRN_PMC4 0x014 /* Performance Monitor Counter 4 */
+#define PMRN_PMC5 0x015 /* Performance Monitor Counter 5 */
#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
+#define PMRN_PMLCA4 0x094 /* PM Local Control A4 */
+#define PMRN_PMLCA5 0x095 /* PM Local Control A5 */
#define PMLCA_FC 0x80000000 /* Freeze Counter */
#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
@@ -38,6 +42,8 @@
#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
+#define PMRN_PMLCB4 0x114 /* PM Local Control B4 */
+#define PMRN_PMLCB5 0x115 /* PM Local Control B5 */
#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */
#define PMLCB_THRESHMUL_SHIFT 8
@@ -57,14 +63,20 @@
#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 2 */
#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 3 */
+#define PMRN_UPMC4 0x004 /* User Performance Monitor Counter 4 */
+#define PMRN_UPMC5 0x005 /* User Performance Monitor Counter 5 */
#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
+#define PMRN_UPMLCA4 0x084 /* User PM Local Control A4 */
+#define PMRN_UPMLCA5 0x085 /* User PM Local Control A5 */
#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
+#define PMRN_UPMLCB4 0x104 /* User PM Local Control B4 */
+#define PMRN_UPMLCB5 0x105 /* User PM Local Control B5 */
#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cc39139..2d4eee2 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -2073,7 +2073,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
MMU_FTR_USE_TLBILX,
.icache_bsize = 64,
.dcache_bsize = 64,
- .num_pmcs = 4,
+ .num_pmcs = 6,
.oprofile_cpu_type = "ppc/e6500",
.oprofile_type = PPC_OPROFILE_FSL_EMB,
.cpu_setup = __setup_cpu_e6500,
diff --git a/arch/powerpc/oprofile/op_model_fsl_emb.c b/arch/powerpc/oprofile/op_model_fsl_emb.c
index ccc1daa..2a82d3e 100644
--- a/arch/powerpc/oprofile/op_model_fsl_emb.c
+++ b/arch/powerpc/oprofile/op_model_fsl_emb.c
@@ -46,6 +46,12 @@ static inline u32 get_pmlca(int ctr)
case 3:
pmlca = mfpmr(PMRN_PMLCA3);
break;
+ case 4:
+ pmlca = mfpmr(PMRN_PMLCA4);
+ break;
+ case 5:
+ pmlca = mfpmr(PMRN_PMLCA5);
+ break;
default:
panic("Bad ctr number\n");
}
@@ -68,6 +74,12 @@ static inline void set_pmlca(int ctr, u32 pmlca)
case 3:
mtpmr(PMRN_PMLCA3, pmlca);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, pmlca);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, pmlca);
+ break;
default:
panic("Bad ctr number\n");
}
@@ -84,6 +96,10 @@ static inline unsigned int ctr_read(unsigned int i)
return mfpmr(PMRN_PMC2);
case 3:
return mfpmr(PMRN_PMC3);
+ case 4:
+ return mfpmr(PMRN_PMC4);
+ case 5:
+ return mfpmr(PMRN_PMC5);
default:
return 0;
}
@@ -104,6 +120,12 @@ static inline void ctr_write(unsigned int i, unsigned int val)
case 3:
mtpmr(PMRN_PMC3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMC4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMC5, val);
+ break;
default:
break;
}
@@ -133,6 +155,14 @@ static void init_pmc_stop(int ctr)
mtpmr(PMRN_PMLCA3, pmlca);
mtpmr(PMRN_PMLCB3, pmlcb);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, pmlca);
+ mtpmr(PMRN_PMLCB4, pmlcb);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, pmlca);
+ mtpmr(PMRN_PMLCB5, pmlcb);
+ break;
default:
panic("Bad ctr number!\n");
}
diff --git a/arch/powerpc/perf/core-fsl-emb.c b/arch/powerpc/perf/core-fsl-emb.c
index 0b13f74..d35ae52 100644
--- a/arch/powerpc/perf/core-fsl-emb.c
+++ b/arch/powerpc/perf/core-fsl-emb.c
@@ -70,6 +70,12 @@ static unsigned long read_pmc(int idx)
case 3:
val = mfpmr(PMRN_PMC3);
break;
+ case 4:
+ val = mfpmr(PMRN_PMC4);
+ break;
+ case 5:
+ val = mfpmr(PMRN_PMC5);
+ break;
default:
printk(KERN_ERR "oops trying to read PMC%d\n", idx);
val = 0;
@@ -95,6 +101,12 @@ static void write_pmc(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMC3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMC4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMC5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMC%d\n", idx);
}
@@ -120,6 +132,12 @@ static void write_pmlca(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMLCA3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMLCA4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCA5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
}
@@ -145,6 +163,12 @@ static void write_pmlcb(int idx, unsigned long val)
case 3:
mtpmr(PMRN_PMLCB3, val);
break;
+ case 4:
+ mtpmr(PMRN_PMLCB4, val);
+ break;
+ case 5:
+ mtpmr(PMRN_PMLCB5, val);
+ break;
default:
printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
}
--
1.7.9.7
^ permalink raw reply related [flat|nested] 6+ messages in thread