From: Fabio Estevam <festevam@gmail.com> To: broonie@kernel.org Cc: Fabio Estevam <fabio.estevam@freescale.com>, alsa-devel@alsa-project.org, shawn.guo@linaro.org, lars@metafoo.de, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/2] ARM: dts: imx51-babbage: Pass a real clock to the codec Date: Sun, 9 Jun 2013 22:07:47 -0300 [thread overview] Message-ID: <1370826467-30399-2-git-send-email-festevam@gmail.com> (raw) In-Reply-To: <1370826467-30399-1-git-send-email-festevam@gmail.com> From: Fabio Estevam <fabio.estevam@freescale.com> On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- arch/arm/boot/dts/imx51-babbage.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6dd9486..27b4061 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -61,6 +61,16 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + clocks { + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 1>; + }; + }; }; &esdhc1 { @@ -229,6 +239,7 @@ MX51_PAD_EIM_A27__GPIO2_21 0x5 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 >; }; }; @@ -255,7 +266,7 @@ sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clock-frequency = <26000000>; + clocks = <&clk_26M>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; -- 1.8.1.2
WARNING: multiple messages have this Message-ID (diff)
From: festevam@gmail.com (Fabio Estevam) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/2] ARM: dts: imx51-babbage: Pass a real clock to the codec Date: Sun, 9 Jun 2013 22:07:47 -0300 [thread overview] Message-ID: <1370826467-30399-2-git-send-email-festevam@gmail.com> (raw) In-Reply-To: <1370826467-30399-1-git-send-email-festevam@gmail.com> From: Fabio Estevam <fabio.estevam@freescale.com> On imx51_babbage the codec clock is activated via GPIO4_26. Provide a real clock to the sgtl5000 codec via device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- arch/arm/boot/dts/imx51-babbage.dts | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 6dd9486..27b4061 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -61,6 +61,16 @@ mux-int-port = <2>; mux-ext-port = <3>; }; + + clocks { + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 1>; + }; + }; }; &esdhc1 { @@ -229,6 +239,7 @@ MX51_PAD_EIM_A27__GPIO2_21 0x5 MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 >; }; }; @@ -255,7 +266,7 @@ sgtl5000: codec at 0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - clock-frequency = <26000000>; + clocks = <&clk_26M>; VDDA-supply = <&vdig_reg>; VDDIO-supply = <&vvideo_reg>; }; -- 1.8.1.2
next prev parent reply other threads:[~2013-06-10 1:08 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-06-10 1:07 [PATCH 1/2] ASoC: sgtl5000: Let the codec acquire its clock Fabio Estevam 2013-06-10 1:07 ` Fabio Estevam 2013-06-10 1:07 ` Fabio Estevam [this message] 2013-06-10 1:07 ` [PATCH 2/2] ARM: dts: imx51-babbage: Pass a real clock to the codec Fabio Estevam 2013-07-15 14:30 ` Shawn Guo 2013-07-15 14:30 ` Shawn Guo 2013-06-10 8:49 ` [PATCH 1/2] ASoC: sgtl5000: Let the codec acquire its clock Shawn Guo 2013-06-10 8:49 ` Shawn Guo 2013-06-10 9:27 ` Mark Brown 2013-06-10 9:27 ` Mark Brown 2013-06-10 15:41 ` Shawn Guo 2013-06-10 15:41 ` Shawn Guo 2013-06-10 16:07 ` Fabio Estevam 2013-06-10 16:07 ` Fabio Estevam
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1370826467-30399-2-git-send-email-festevam@gmail.com \ --to=festevam@gmail.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=fabio.estevam@freescale.com \ --cc=lars@metafoo.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=shawn.guo@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.