* [PATCH 1/3] ARM: tegra: enable audio on Dalmore
@ 2013-06-12 17:37 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-06-12 17:37 UTC (permalink / raw)
To: Stephen Warren
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Stephen Warren
From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus.
Enable the relevant Tegra I2C controller. Add the top-level "sound" node
to hook everything together, and provide a "sound card" device.
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 39 ++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index cfeb0f5..b009b90 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -728,6 +728,15 @@
sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <100>;
};
+
+ rt5640: rt5640 {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ };
};
i2c@7000d000 {
@@ -842,6 +851,12 @@
nvidia,invert-interrupt;
};
+ ahub {
+ i2s@70080400 {
+ status = "okay";
+ };
+ };
+
sdhci@78000400 {
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
bus-width = <4>;
@@ -936,4 +951,28 @@
vin-supply = <&tps65090_dcdc1_reg>;
};
};
+
+ sound {
+ compatible = "nvidia,tegra-audio-rt5640-dalmore",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "NVIDIA Tegra Dalmore";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL",
+ "Speakers", "SPORP",
+ "Speakers", "SPORN",
+ "Speakers", "SPOLP",
+ "Speakers", "SPOLN";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5640>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+ <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA114_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
};
--
1.8.1.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/3] ARM: tegra: enable audio on Dalmore
@ 2013-06-12 17:37 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-06-12 17:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Stephen Warren <swarren@nvidia.com>
Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus.
Enable the relevant Tegra I2C controller. Add the top-level "sound" node
to hook everything together, and provide a "sound card" device.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/boot/dts/tegra114-dalmore.dts | 39 ++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index cfeb0f5..b009b90 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -728,6 +728,15 @@
sbs,i2c-retry-count = <2>;
sbs,poll-retry-count = <100>;
};
+
+ rt5640: rt5640 {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ };
};
i2c at 7000d000 {
@@ -842,6 +851,12 @@
nvidia,invert-interrupt;
};
+ ahub {
+ i2s at 70080400 {
+ status = "okay";
+ };
+ };
+
sdhci at 78000400 {
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
bus-width = <4>;
@@ -936,4 +951,28 @@
vin-supply = <&tps65090_dcdc1_reg>;
};
};
+
+ sound {
+ compatible = "nvidia,tegra-audio-rt5640-dalmore",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "NVIDIA Tegra Dalmore";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL",
+ "Speakers", "SPORP",
+ "Speakers", "SPORN",
+ "Speakers", "SPOLP",
+ "Speakers", "SPOLN";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5640>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+ <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA114_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
};
--
1.8.1.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/3] ARM: tegra: enable audio on Beaver
2013-06-12 17:37 ` Stephen Warren
@ 2013-06-12 17:37 ` Stephen Warren
-1 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-06-12 17:37 UTC (permalink / raw)
To: Stephen Warren
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Stephen Warren
From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Beaver uses the RT5640 audio CODEC. Instantiate this on the I2C bus, and
add the top-level "sound" node to hook everything together and provide a
"sound card" device.
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/tegra30-beaver.dts | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index a7a34b9..87c5f7b 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -116,6 +116,15 @@
status = "okay";
clock-frequency = <100000>;
+ rt5640: rt5640 {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+ };
+
tps62361 {
compatible = "ti,tps62361";
reg = <0x60>;
@@ -404,4 +413,24 @@
gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
};
};
+
+ sound {
+ compatible = "nvidia,tegra-audio-rt5640-beaver",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "NVIDIA Tegra Beaver";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5640>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
};
--
1.8.1.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/3] ARM: tegra: enable audio on Beaver
@ 2013-06-12 17:37 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-06-12 17:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Stephen Warren <swarren@nvidia.com>
Beaver uses the RT5640 audio CODEC. Instantiate this on the I2C bus, and
add the top-level "sound" node to hook everything together and provide a
"sound card" device.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/boot/dts/tegra30-beaver.dts | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index a7a34b9..87c5f7b 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -116,6 +116,15 @@
status = "okay";
clock-frequency = <100000>;
+ rt5640: rt5640 {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+ };
+
tps62361 {
compatible = "ti,tps62361";
reg = <0x60>;
@@ -404,4 +413,24 @@
gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
};
};
+
+ sound {
+ compatible = "nvidia,tegra-audio-rt5640-beaver",
+ "nvidia,tegra-audio-rt5640";
+ nvidia,model = "NVIDIA Tegra Beaver";
+
+ nvidia,audio-routing =
+ "Headphones", "HPOR",
+ "Headphones", "HPOL";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&rt5640>;
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
};
--
1.8.1.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/3] ARM: tegra: enable RT5640 sound driver in defconfig
2013-06-12 17:37 ` Stephen Warren
@ 2013-06-12 17:37 ` Stephen Warren
-1 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-06-12 17:37 UTC (permalink / raw)
To: Stephen Warren
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Stephen Warren
From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Enable the ASoC machine driver that is required for audio on Dalmore
and Beaver.
Signed-off-by: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/configs/tegra_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 44e00ed..2d9a483 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -179,6 +179,7 @@ CONFIG_SND=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
--
1.8.1.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/3] ARM: tegra: enable RT5640 sound driver in defconfig
@ 2013-06-12 17:37 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-06-12 17:37 UTC (permalink / raw)
To: linux-arm-kernel
From: Stephen Warren <swarren@nvidia.com>
Enable the ASoC machine driver that is required for audio on Dalmore
and Beaver.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
arch/arm/configs/tegra_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 44e00ed..2d9a483 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -179,6 +179,7 @@ CONFIG_SND=y
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
--
1.8.1.5
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/3] ARM: tegra: enable audio on Dalmore
2013-06-12 17:37 ` Stephen Warren
@ 2013-06-12 21:04 ` Stephen Warren
-1 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-06-12 21:04 UTC (permalink / raw)
To: Stephen Warren
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-tegra-u79uwXL29TY76Z2rM5mHXA, Stephen Warren
On 06/12/2013 11:37 AM, Stephen Warren wrote:
> From: Stephen Warren <swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
>
> Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus.
> Enable the relevant Tegra I2C controller. Add the top-level "sound" node
> to hook everything together, and provide a "sound card" device.
Patches 1 and 2 applied to Tegra's for-3.11/dt branch, and patch 3
squashed into Tegra's for-3.11/defconfig branch.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/3] ARM: tegra: enable audio on Dalmore
@ 2013-06-12 21:04 ` Stephen Warren
0 siblings, 0 replies; 8+ messages in thread
From: Stephen Warren @ 2013-06-12 21:04 UTC (permalink / raw)
To: linux-arm-kernel
On 06/12/2013 11:37 AM, Stephen Warren wrote:
> From: Stephen Warren <swarren@nvidia.com>
>
> Dalmore uses the RT5640 audio CODEC. Instantiate this on the I2C bus.
> Enable the relevant Tegra I2C controller. Add the top-level "sound" node
> to hook everything together, and provide a "sound card" device.
Patches 1 and 2 applied to Tegra's for-3.11/dt branch, and patch 3
squashed into Tegra's for-3.11/defconfig branch.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-06-12 21:04 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-12 17:37 [PATCH 1/3] ARM: tegra: enable audio on Dalmore Stephen Warren
2013-06-12 17:37 ` Stephen Warren
[not found] ` <1371058636-25244-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-06-12 17:37 ` [PATCH 2/3] ARM: tegra: enable audio on Beaver Stephen Warren
2013-06-12 17:37 ` Stephen Warren
2013-06-12 17:37 ` [PATCH 3/3] ARM: tegra: enable RT5640 sound driver in defconfig Stephen Warren
2013-06-12 17:37 ` Stephen Warren
2013-06-12 21:04 ` [PATCH 1/3] ARM: tegra: enable audio on Dalmore Stephen Warren
2013-06-12 21:04 ` Stephen Warren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.