[ 3.5.y.z extended stable ] Linux 3.5.7.15 stable review

[ 3.5.y.z extended stable ] Linux 3.5.7.15 stable review

[Luis Henriques]

This is the start of the review cycle for the Linux 3.5.7.15 stable kernel.

This version contains 93 new patches, summarized below.  The new patches are
posted as replies to this message and also available in this git branch:

http://kernel.ubuntu.com/git?p=ubuntu/linux.git;h=linux-3.5.y-review;a=shortlog

git://kernel.ubuntu.com/ubuntu/linux.git  linux-3.5.y-review

The review period for version 3.5.7.15 will be open for the next three days.
To report a problem, please reply to the relevant follow-up patch message.

For more information about the Linux 3.5.y.z extended stable kernel version,
see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable .

 -Luis

--
 arch/arm/boot/compressed/Makefile                  |   2 +-
 arch/arm/boot/compressed/head-sa1100.S             |   1 +
 arch/arm/boot/compressed/head-shark.S              |   1 +
 arch/arm/boot/compressed/head.S                    |   1 +
 arch/arm/kernel/topology.c                         |   2 +
 arch/m68k/kernel/head.S                            |  29 +++--
 arch/powerpc/include/asm/exception-64s.h           |   2 +-
 arch/powerpc/kernel/exceptions-64s.S               |   2 +-
 arch/powerpc/kernel/irq.c                          |   2 +-
 arch/powerpc/kernel/process.c                      |   4 +-
 arch/powerpc/kernel/traps.c                        |  10 ++
 arch/powerpc/platforms/pseries/eeh_pseries.c       |  12 +--
 arch/x86/kernel/relocate_kernel_64.S               |   2 +-
 drivers/acpi/video.c                               |  32 ++++++
 drivers/ata/ata_piix.c                             |  14 +++
 drivers/ata/libata-core.c                          |   6 ++
 drivers/block/cciss.c                              |  32 +++---
 drivers/dma/ste_dma40.c                            |   9 +-
 drivers/gpu/drm/drm_irq.c                          |   6 +-
 drivers/gpu/drm/gma500/cdv_intel_display.c         |  14 +++
 drivers/gpu/drm/gma500/framebuffer.c               |   4 +-
 drivers/gpu/drm/gma500/psb_intel_display.c         |  14 +++
 drivers/gpu/drm/i915/intel_lvds.c                  |   4 +-
 drivers/gpu/drm/i915/intel_sdvo.c                  |  12 ++-
 drivers/gpu/drm/mgag200/mgag200_mode.c             |   9 +-
 drivers/gpu/drm/radeon/atombios_encoders.c         |  11 +-
 drivers/gpu/drm/radeon/evergreen.c                 |  10 +-
 drivers/gpu/drm/radeon/ni.c                        |  10 +-
 drivers/gpu/drm/radeon/r100.c                      |   9 +-
 drivers/gpu/drm/radeon/r300.c                      |   9 +-
 drivers/gpu/drm/radeon/r420.c                      |  10 +-
 drivers/gpu/drm/radeon/r520.c                      |   9 +-
 drivers/gpu/drm/radeon/r600.c                      |  10 +-
 drivers/gpu/drm/radeon/rs400.c                     |   9 +-
 drivers/gpu/drm/radeon/rs600.c                     |   9 +-
 drivers/gpu/drm/radeon/rs690.c                     |   9 +-
 drivers/gpu/drm/radeon/rv515.c                     |   9 +-
 drivers/gpu/drm/radeon/rv770.c                     |  10 +-
 drivers/gpu/drm/radeon/si.c                        |  10 +-
 drivers/hwmon/adm1021.c                            |  58 ++++++++--
 drivers/iommu/amd_iommu.c                          |  31 +++++-
 drivers/iommu/amd_iommu_types.h                    |   1 +
 drivers/md/raid1.c                                 |  34 +++---
 drivers/md/raid10.c                                |  26 +++--
 drivers/net/ethernet/broadcom/tg3.c                |  42 ++++++++
 drivers/net/ethernet/broadcom/tg3.h                |   8 +-
 drivers/net/wireless/ath/ath9k/Kconfig             |  10 +-
 drivers/net/wireless/ath/ath9k/Makefile            |   2 +-
 .../net/wireless/ath/ath9k/ar9003_2p2_initvals.h   |  10 +-
 drivers/net/wireless/ath/ath9k/init.c              |   7 +-
 drivers/net/wireless/ath/ath9k/rc.h                |   2 +-
 drivers/net/wireless/b43/main.c                    |   2 +-
 drivers/net/wireless/iwlwifi/iwl-agn-sta.c         |   2 +-
 drivers/net/xen-netfront.c                         |  17 ++-
 drivers/platform/x86/thinkpad_acpi.c               |   7 ++
 drivers/regulator/palmas-regulator.c               |   2 +-
 drivers/rtc/rtc-twl.c                              |   1 +
 drivers/usb/dwc3/gadget.c                          |  15 ++-
 drivers/usb/host/ehci-sched.c                      |   2 +-
 drivers/usb/host/xhci-mem.c                        |  10 +-
 drivers/usb/host/xhci.c                            |  12 ++-
 drivers/usb/serial/ark3116.c                       |   2 +-
 drivers/usb/serial/cypress_m8.c                    |  18 +++-
 drivers/usb/serial/cypress_m8.h                    |   4 +
 drivers/usb/serial/ftdi_sio.c                      |   2 +-
 drivers/usb/serial/iuu_phoenix.c                   |   4 +-
 drivers/usb/serial/keyspan.c                       |   2 +-
 drivers/usb/serial/mos7720.c                       |  25 +++--
 drivers/usb/serial/mos7840.c                       |  35 ++++--
 drivers/usb/serial/option.c                        |   2 +
 drivers/usb/serial/pl2303.c                        |  10 +-
 drivers/usb/serial/qcserial.c                      |   2 +
 drivers/usb/serial/spcp8x5.c                       |  10 +-
 drivers/usb/serial/visor.c                         |   9 ++
 drivers/usb/serial/whiteheat.c                     |   2 +-
 drivers/xen/events.c                               |  19 +++-
 fs/ceph/locks.c                                    |  73 ++++++++-----
 fs/ceph/mds_client.c                               |  90 ++++++++--------
 fs/ceph/super.c                                    |   7 +-
 fs/ceph/super.h                                    |  11 +-
 fs/ext4/super.c                                    |   2 +
 fs/hpfs/file.c                                     |  24 +++--
 fs/hpfs/hpfs_fn.h                                  |   1 +
 fs/hpfs/inode.c                                    |   5 +-
 fs/proc/kmsg.c                                     |  10 +-
 include/linux/ceph/auth.h                          |  18 ++++
 include/linux/cpu.h                                |   4 +
 include/linux/swapops.h                            |   3 +
 include/linux/syslog.h                             |   4 +-
 include/net/bluetooth/hci_core.h                   |   1 +
 include/net/bluetooth/mgmt.h                       |   1 +
 include/xen/interface/io/netif.h                   |   1 +
 kernel/audit.c                                     |   2 +-
 kernel/cpu.c                                       |  55 ++++------
 kernel/printk.c                                    |  91 ++++++++--------
 kernel/sys.c                                       |  29 ++++-
 lib/klist.c                                        |   2 +-
 mm/hugetlb.c                                       |   2 +-
 mm/migrate.c                                       |  23 +++-
 mm/swap_state.c                                    |  18 +++-
 net/bluetooth/hci_core.c                           |   6 +-
 net/bluetooth/mgmt.c                               |  21 ++++
 net/ceph/auth.c                                    | 117 +++++++++++++++++----
 net/ceph/auth_x.c                                  |  24 ++++-
 net/ceph/auth_x.h                                  |   1 +
 net/ceph/messenger.c                               |   3 +-
 net/ceph/mon_client.c                              |   7 +-
 net/ceph/osd_client.c                              |  33 +++---
 net/mac80211/iface.c                               |   9 ++
 net/wireless/sme.c                                 |   3 +
 sound/core/pcm_native.c                            |   4 +-
 sound/usb/mixer.c                                  |   1 +
 sound/usb/quirks-table.h                           |  14 ++-
 113 files changed, 1103 insertions(+), 424 deletions(-)

Adis Hamzić (1):
      radeon: Fix system hang issue when using KMS with older cards

Al Viro (1):
      snd_pcm_link(): fix a leak...

Alan Stern (1):
      USB: revert periodic scheduling bugfix

Alex Deucher (1):
      drm/radeon: don't allow audio on DCE6

Alex Elder (3):
      libceph: register request before unregister linger
      libceph: always reset osds when kicking
      libceph: must hold mutex for reset_changed_osds()

Alex Hung (2):
      ACPI video: ignore BIOS initial backlight value for HP 1000
      ACPI / video: ignore BIOS initial backlight value for HP m4

Alex Lyakas (1):
      md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it.

Arnd Bergmann (2):
      ARM: 7742/1: topology: export cpu_topology
      ARM: 7743/1: compressed/head.S: work around new binutils warning

Ash Willis (1):
      ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6

Ben Mesman (1):
      drm/i915: no lvds quirk for hp t5740

Benjamin Herrenschmidt (1):
      powerpc: Fix missing/delayed calls to irq_work

Bjørn Mork (1):
      USB: option: blacklist network interface on Huawei E1820

Chew, Chiau Ee (1):
      ata_piix: add PCI IDs for Intel BayTail

Christopher Harvey (1):
      drm/mgag200: Add missing write to index before accessing data register

Clemens Ladisch (1):
      ALSA: usb-audio: fix Roland/Cakewalk UM-3G support

Daniel Vetter (1):
      drm/i915: prefer VBT modes for SVDO-LVDS over EDID

Egbert Eich (1):
      drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.

Emmanuel Grumbach (1):
      iwlwifi: dvm: fix zero LQ CMD sending avoidance

Felix Fietkau (1):
      Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity"

Finn Thain (1):
      m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK

Gavin Shan (1):
      powerpc/eeh: Don't check RTAS token to get PE addr

George Cherian (1):
      usb: dwc3: gadget: free trb pool only from epnum 2

Guenter Roeck (1):
      hwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617

Gustavo Maciel Dias Vieira (1):
      ACPI video: ignore BIOS backlight value for HP dm4

Huacai Chen (1):
      drm: fix a use-after-free when GPU acceleration disabled

Jim Schutt (2):
      ceph: add cpu_to_le32() calls when encoding a reconnect capability
      ceph: ceph_pagelist_append might sleep while atomic

Joerg Roedel (1):
      iommu/amd: Workaround for ERBT1312

Johan Hedberg (1):
      Bluetooth: Fix mgmt handling of power on failures

Johan Hovold (12):
      USB: serial: fix Treo/Kyocera interrrupt-in urb context
      USB: visor: fix initialisation of Treo/Kyocera devices
      USB: mos7720: fix DMA to stack
      USB: mos7840: fix DMA to stack
      USB: ark3116: fix control-message timeout
      USB: iuu_phoenix: fix bulk-message timeout
      USB: mos7720: fix message timeouts
      USB: keyspan: fix bogus array index
      USB: mos7720: fix hardware flow control
      USB: whiteheat: fix broken port configuration
      USB: spcp8x5: fix device initialisation at open
      USB: pl2303: fix device initialisation at open

Johannes Berg (2):
      cfg80211: check wdev->netdev in connection work
      mac80211: close AP_VLAN interfaces before unregistering all

Kees Cook (3):
      b43: stop format string leaking into error msgs
      kmsg: honor dmesg_restrict sysctl on /dev/kmsg
      x86: Fix typo in kexec register clearing

Keir Fraser (1):
      xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.

Kishon Vijay Abraham I (1):
      regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10

Manoj Iyer (1):
      thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR

Marco Stornelli (1):
      hpfs: drop vmtruncate

Michael Chan (1):
      tg3: Add New 5719 Read DMA workaround

Michael Ellerman (1):
      powerpc: Fix stack overflow crash in resume_kernel when ftracing

Mikulas Patocka (1):
      hpfs: fix warnings when the filesystem fills up

Naoya Horiguchi (1):
      mm: migration: add migrate_entry_wait_huge()

NeilBrown (1):
      md/raid1,raid10: use freeze_array in place of raise_barrier in various places.

Nithin Sujir (2):
      tg3: Add read dma workaround for 5720
      tg3: Wait for boot code to finish after power on

Oleg Nesterov (1):
      audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE

Patrik Jakobsson (3):
      drm/gma500: Increase max resolution for mode setting
      drm/gma500/psb: Unpin framebuffer on crtc disable
      drm/gma500/cdv: Unpin framebuffer on crtc disable

Paul Mackerras (1):
      powerpc: Fix emulation of illegal instructions on PowerNV platform

Rabin Vincent (1):
      dmaengine: ste_dma40: fix pm runtime ref counting

Rafael Aquini (1):
      swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion

Richard Weinberger (1):
      USB: serial: Add Option GTM681W to qcserial device table.

Robert Butora (1):
      USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device

Robin Holt (1):
      reboot: rigrate shutdown/reboot to boot cpu

Sage Weil (6):
      libceph: clear messenger auth_retry flag when we authenticate
      libceph: fix authorizer invalidation
      libceph: add update_authorizer auth method
      libceph: wrap auth ops in wrapper functions
      libceph: wrap auth methods in a mutex
      ceph: fix statvfs fr_size

Sergio Aguirre (1):
      xhci-mem: init list heads at the beginning of init

Srivatsa S. Bhat (1):
      CPU hotplug: provide a generic helper to disable/enable CPU hotplug

Stephen M. Cameron (1):
      cciss: fix broken mutex usage in ioctl

Sujith Manoharan (2):
      ath9k: Disable PowerSave by default
      ath9k: Use minstrel rate control by default

Suravee Suthikulpanit (1):
      iommu/amd: Re-enable IOMMU event log interrupt after handling.

Takashi Iwai (2):
      ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface
      ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270

Theodore Ts'o (1):
      ext4: lock i_mutex when truncating orphan inodes

Tony Camuso (1):
      xhci - correct comp_mode_recovery_timer on return from hibernate

Tony Lindgren (1):
      drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree

Vincent Pelletier (1):
      libata: make ata_exec_internal_sg honor DMADIR

Vladimir Murzin (1):
      xhci: fix list access before init

Wei Liu (1):
      xen-netfront: reduce gso_max_size to account for max TCP header

Ying Xue (1):
      USB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointer

wang, biao (1):
      klist: del waiter from klist_remove_waiters before wakeup waitting process

[PATCH 01/93] ata_piix: add PCI IDs for Intel BayTail

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Chew, Chiau Ee" <chiau.ee.chew@intel.com>

commit fca8c90d519dedd4f4b19901d005c243f7f0bf2e upstream.

Adds IDE-mode SATA Device IDs for the Intel BayTrail platform.

Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/ata/ata_piix.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a382b7c..624a948 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -151,6 +151,7 @@ enum piix_controller_ids {
 	piix_pata_vmw,			/* PIIX4 for VMware, spurious DMA_ERR */
 	ich8_sata_snb,
 	ich8_2port_sata_snb,
+	ich8_2port_sata_byt,
 };
 
 struct piix_map_db {
@@ -356,6 +357,9 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
 	/* SATA Controller IDE (Wellsburg) */
 	{ 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (BayTrail) */
+	{ 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
+	{ 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt },
 
 	{ }	/* terminate list */
 };
@@ -521,6 +525,7 @@ static const struct piix_map_db *piix_map_db_table[] = {
 	[tolapai_sata]		= &tolapai_map_db,
 	[ich8_sata_snb]		= &ich8_map_db,
 	[ich8_2port_sata_snb]	= &ich8_2port_map_db,
+	[ich8_2port_sata_byt]	= &ich8_2port_map_db,
 };
 
 static struct ata_port_info piix_port_info[] = {
@@ -671,6 +676,15 @@ static struct ata_port_info piix_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
+
+	[ich8_2port_sata_byt] =
+	{
+		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &piix_sata_ops,
+	},
 };
 
 static struct pci_bits piix_enable_bits[] = {
-- 
1.8.1.2

[PATCH 02/93] libata: make ata_exec_internal_sg honor DMADIR

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vincent Pelletier <plr.vincent@gmail.com>

commit e771451c0a831d96a7c14b0ca8a8ec671d98567b upstream.

libata honors DMADIR for regular commands, but not for internal commands
used (among other) during device initialisation.

This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611
(such as "Abit Serillel 2") end up disabled when used with an ATAPI device
after a few tries.

Log output of the bridge being hot-plugged with an ATAPI drive:

  [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed
  [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch }
  [ 9631.212939] ata1: hard resetting link
  [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33
  [ 9632.106407] ata1.00: applying bridge limits
  [ 9632.108151] ata1.00: configured for UDMA/33
  [ 9637.105303] ata1.00: qc timeout (cmd 0xa0)
  [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9637.105335] ata1: hard resetting link
  [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9638.047878] ata1.00: configured for UDMA/33
  [ 9643.044933] ata1.00: qc timeout (cmd 0xa0)
  [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps
  [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3
  [ 9643.044979] ata1: hard resetting link
  [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9643.987471] ata1.00: configured for UDMA/33
  [ 9648.984591] ata1.00: qc timeout (cmd 0xa0)
  [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5)
  [ 9648.984619] ata1.00: disabled
  [ 9649.000593] ata1: hard resetting link
  [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  [ 9649.955864] ata1: EH complete

With this patch, the drive enumerates correctly when libata is loaded with
atapi_dmadir=1:

  [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen
  [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed
  [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch }
  [ 9891.810900] ata1: hard resetting link
  [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW  DVR-115, 1.06, max UDMA/33, DMADIR
  [ 9892.763558] ata1.00: applying bridge limits
  [ 9892.765393] ata1.00: configured for UDMA/33
  [ 9892.786063] ata1: EH complete
  [ 9892.792062] scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-115  1.06 PQ: 0 ANSI: 5
  [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray
  [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2
  [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5

Based on a patch by Csaba Halász <csaba.halasz@gmail.com> on linux-ide:
http://marc.info/?l=linux-ide&m=136121147832295&w=2

tj: minor formatting changes.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/ata/libata-core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 23f092d..9e47300 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1599,6 +1599,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
 	qc->tf = *tf;
 	if (cdb)
 		memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
+
+	/* some SATA bridges need us to indicate data xfer direction */
+	if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) &&
+	    dma_dir == DMA_FROM_DEVICE)
+		qc->tf.feature |= ATAPI_DMADIR;
+
 	qc->flags |= ATA_QCFLAG_RESULT_TF;
 	qc->dma_dir = dma_dir;
 	if (dma_dir != DMA_NONE) {
-- 
1.8.1.2

[PATCH 03/93] cfg80211: check wdev->netdev in connection work

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit c815797663b72e3ac1736f1886538152bc48e4af upstream.

If a P2P-Device is present and another virtual interface triggers
the connection work, the system crash because it tries to check
if the P2P-Device's netdev (which doesn't exist) is up. Skip any
wdevs that have no netdev to fix this.

Reported-by: YanBo <dreamfly281@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 net/wireless/sme.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index f7e937f..3fd50a1 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -222,6 +222,9 @@ void cfg80211_conn_work(struct work_struct *work)
 	mutex_lock(&rdev->devlist_mtx);
 
 	list_for_each_entry(wdev, &rdev->netdev_list, list) {
+		if (!wdev->netdev)
+			continue;
+
 		wdev_lock(wdev);
 		if (!netif_running(wdev->netdev)) {
 			wdev_unlock(wdev);
-- 
1.8.1.2

[PATCH 04/93] xhci-mem: init list heads at the beginning of init

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergio Aguirre <sergio.a.aguirre.rodriguez@intel.com>

commit 331de00a64e5027365145bdf51da27b9ce15dfd5 upstream.

It is possible that we fail on xhci_mem_init, just before doing
the INIT_LIST_HEAD, and calling xhci_mem_cleanup.

Problem is that, the list_for_each_entry_safe macro, assumes
list heads are initialized (not NULL), and dereferences their 'next'
pointer, causing a kernel panic if this is not yet initialized.

Let's protect from that by moving inits to the beginning.

This patch should be backported to kernels as old as 3.2, that
contain the commit 9574323c39d1f8359a04843075d89c9f32d8b7e6 "xHCI: test
USB2 software LPM".

Signed-off-by: Sergio Aguirre <sergio.a.aguirre.rodriguez@intel.com>
Acked-by: David Cohen <david.a.cohen@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/host/xhci-mem.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 90ce33b..59c08b2 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2276,6 +2276,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	u32 page_size, temp;
 	int i;
 
+	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
 	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
 	xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
 	for (i = 0; i < 16; i++) {
@@ -2354,7 +2357,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
-	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
 	xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
 			(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2465,8 +2467,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	if (xhci_setup_port_arrays(xhci, flags))
 		goto fail;
 
-	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
 	/* Enable USB 3.0 device notifications for function remote wake, which
 	 * is necessary for allowing USB 3.0 devices to do remote wakeup from
 	 * U3 (device suspend).
-- 
1.8.1.2

[PATCH 05/93] xhci: fix list access before init

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vladimir Murzin <murzin.v@gmail.com>

commit 88696ae432ce7321540ac53d9caab3de9118b094 upstream.

If for whatever reason we fall into fail path in xhci_mem_init()
before bw table gets initialized we may access the uninitialized lists
in xhci_mem_cleanup().

Check for bw table before traversing lists in cleanup routine.

This patch should be backported to kernels as old as 3.2, that contain
the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store
information about roothubs and TTs."

Reported-by: Sergey Dyasly <dserrg@gmail.com>
Tested-by: Sergey Dyasly <dserrg@gmail.com>
Signed-off-by: Vladimir Murzin <murzin.v@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/host/xhci-mem.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 59c08b2..0618f25 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1847,6 +1847,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
+	if (!xhci->rh_bw)
+		goto no_bw;
+
 	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
 	for (i = 0; i < num_ports; i++) {
 		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1865,6 +1868,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 		}
 	}
 
+no_bw:
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
 	xhci->num_active_eps = 0;
-- 
1.8.1.2

[PATCH 06/93] xhci - correct comp_mode_recovery_timer on return from hibernate

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Camuso <tcamuso@redhat.com>

commit 77df9e0b799b03e1d5d9c68062709af5f637e834 upstream.

Commit 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP
Hardware) was a workaround for systems using the SN65LVPE502CP,
controller, but it introduced a bug in resume from hibernate.

The fix created a timer, comp_mode_recovery_timer, which is deleted from
a timer list when xhci_suspend() is called. However, the hibernate image,
including the timer list containing the comp_mode_recovery_timer, had
already been saved before the timer was deleted.

Upon resume from hibernate, the list containing the comp_mode_recovery_timer
is restored from the image saved to disk, and xhci_resume(), assuming that
the timer had been deleted by xhci_suspend(), makes a call to
compliance_mode_recoery_timer_init(), which creates a new instance of the
comp_mode_recovery_timer and attempts to place it into the same list in which
it is already active, thus corrupting the list during the list_add() call.

At this point, a call trace is emitted indicating the list corruption.
Soon afterward, the system locks up, the watchdog times out, and the
ensuing NMI crashes the system.

The problem did not occur when resuming from suspend. In suspend, the
image in RAM remains exactly as it was when xhci_suspend() deleted the
comp_mode_recovery_timer, so there is no problem when xhci_resume()
creates a new instance of this timer and places it in the still empty
list.

This patch avoids the problem by deleting the timer in xhci_resume()
when resuming from hibernate. Now xhci_resume() can safely make the
call to create a new instance of this timer, whether returning from
suspend or hibernate.

Thanks to Alan Stern for his help with understanding the problem.

[Sarah reworked this patch to cover the case where the xHCI restore
register operation fails, and (temp & STS_SRE) is true (and we re-init
the host, including re-init for the compliance mode), but hibernate is
false.  The original patch would have caused list corruption in this
case.]

This patch should be backported to kernels as old as 3.2, that
contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host:
xhci: Fix Compliance Mode on SN65LVPE502CP Hardware"

Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Tested-by: Tony Camuso <tcamuso@redhat.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/host/xhci.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 23a0091..bd96077 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -947,6 +947,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
 	int			retval = 0;
+	bool			comp_timer_running = false;
 
 	/* Wait a bit if either of the roothubs need to settle from the
 	 * transition into bus suspend.
@@ -984,6 +985,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* If restore operation fails, re-initialize the HC during resume */
 	if ((temp & STS_SRE) || hibernated) {
+
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				!(xhci_all_ports_seen_u0(xhci))) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+		}
+
 		/* Let the USB core know _both_ roothubs lost power. */
 		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
 		usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1026,6 +1034,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		retval = xhci_init(hcd->primary_hcd);
 		if (retval)
 			return retval;
+		comp_timer_running = true;
+
 		xhci_dbg(xhci, "Start the primary HCD\n");
 		retval = xhci_run(hcd->primary_hcd);
 		if (!retval) {
@@ -1067,7 +1077,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	 * to suffer the Compliance Mode issue again. It doesn't matter if
 	 * ports have entered previously to U0 before system's suspension.
 	 */
-	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
 		compliance_mode_recovery_timer_init(xhci);
 
 	/* Re-enable port polling. */
-- 
1.8.1.2

[PATCH 07/93] mac80211: close AP_VLAN interfaces before unregistering all

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit c8aa22db0112f640ac6631347f850879c621840b upstream.

Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces")
there's a bug in mac80211 when it unregisters with AP_VLAN interfaces
up. If the AP_VLAN interface was registered after the AP it belongs
to (which is the typical case) and then we get into this code path,
unregister_netdevice_many() will crash because it isn't prepared to
deal with interfaces being closed in the middle of it. Exactly this
happens though, because we iterate the list, find the AP master this
AP_VLAN belongs to and dev_close() the dependent VLANs. After this,
unregister_netdevice_many() won't pick up the fact that the AP_VLAN
is already down and will do it again, causing a crash.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 net/mac80211/iface.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 4b4d9c5..f51a61c 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1408,6 +1408,15 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local)
 
 	ASSERT_RTNL();
 
+	/*
+	 * Close all AP_VLAN interfaces first, as otherwise they
+	 * might be closed while the AP interface they belong to
+	 * is closed, causing unregister_netdevice_many() to crash.
+	 */
+	list_for_each_entry(sdata, &local->interfaces, list)
+		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			dev_close(sdata->dev);
+
 	mutex_lock(&local->iflist_mtx);
 	list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
 		list_del(&sdata->list);
-- 
1.8.1.2

[PATCH 08/93] iwlwifi: dvm: fix zero LQ CMD sending avoidance

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit a87783699b23395c46bbeeb5d28f6db24897bf26 upstream.

In 63b77bf489881747c5118476918cc8c29378ee63

	iwlwifi: dvm: don't send zeroed LQ cmd

I tried to avoid to send zeroed LQ cmd, but I made a (very)
stupid mistake in the memcmp.
Since this patch has been ported to stable, the fix should
go to stable too.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341

Reported-by: Hinnerk van Bruinehsen <h.v.bruinehsen@fu-berlin.de>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-sta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
index b4f0661..dff75ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
@@ -763,7 +763,7 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 					memcpy(&lq, priv->stations[i].lq,
 					       sizeof(struct iwl_link_quality_cmd));
 
-				if (!memcmp(&lq, &zero_lq, sizeof(lq)))
+				if (memcmp(&lq, &zero_lq, sizeof(lq)))
 					send_lq = true;
 			}
 			spin_unlock_bh(&priv->sta_lock);
-- 
1.8.1.2

[PATCH 09/93] usb: dwc3: gadget: free trb pool only from epnum 2

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: George Cherian <george.cherian@ti.com>

commit 5bf8fae33d14cc5c3c53a926f9079f92c8b082b0 upstream.

we never allocate a TRB pool for physical endpoints
0 and 1 so trying to free it (a invalid TRB pool pointer)
will lead us in a warning while removing dwc3.ko module.

In order to fix the situation, all we have to do is skip
dwc3_free_trb_pool() for physical endpoints 0 and 1 just
as we while deleting endpoints from the endpoints list.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/dwc3/gadget.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index fae7885..3530c2b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1537,10 +1537,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 
 	for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
 		dep = dwc->eps[epnum];
-		dwc3_free_trb_pool(dep);
-
-		if (epnum != 0 && epnum != 1)
+		/*
+		 * Physical endpoints 0 and 1 are special; they form the
+		 * bi-directional USB endpoint 0.
+		 *
+		 * For those two physical endpoints, we don't allocate a TRB
+		 * pool nor do we add them the endpoints list. Due to that, we
+		 * shouldn't do these two operations otherwise we would end up
+		 * with all sorts of bugs when removing dwc3.ko.
+		 */
+		if (epnum != 0 && epnum != 1) {
+			dwc3_free_trb_pool(dep);
 			list_del(&dep->endpoint.ep_list);
+		}
 
 		kfree(dep);
 	}
-- 
1.8.1.2

[PATCH 10/93] USB: revert periodic scheduling bugfix

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit fdc03438f53a00294ed9939eb3a1f6db6f3d8963 upstream.

This patch reverts commit 3e619d04159be54b3daa0b7036b0ce9e067f4b5d
(USB: EHCI: fix bug in scheduling periodic split transfers).  The
commit was valid -- it fixed a real bug -- but the periodic scheduler
in ehci-hcd is in such bad shape (especially the part that handles
split transactions) that fixing one bug is very likely to cause
another to surface.  That's what happened in this case; the result was
choppy and noisy playback on certain 24-bit audio devices.

The only real fix will be to rewrite this entire section of code.  My
next project...

This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1136110.

Thanks to Tim Richardson for extra testing and feedback, and to Joseph
Salisbury and Tyson Tan for tracking down the original source of the
problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Joseph Salisbury <joseph.salisbury@canonical.com>
CC: Tim Richardson <tim@tim-richardson.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/host/ehci-sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index ccc9f70..33182c6 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -236,7 +236,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
 }
 
 static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
 
 /* carryover low/fullspeed bandwidth that crosses uframe boundries */
 static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
-- 
1.8.1.2

[PATCH 11/93] USB: serial: fix Treo/Kyocera interrrupt-in urb context

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 5f8e2c07d75967ee49a5da1d21ddf5f50d48cda0 upstream.

The first and second interrupt-in urbs are swapped for some Treo/Kyocera
devices, but the urb context was never updated with the new port.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/visor.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index f253c91..90cc160 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -574,6 +574,7 @@ static int treo_attach(struct usb_serial *serial)
 		dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
 		dest->bulk_in_buffer = src->bulk_in_buffer;		\
 		dest->interrupt_in_urb = src->interrupt_in_urb;		\
+		dest->interrupt_in_urb->context = dest;			\
 		dest->interrupt_in_endpointAddress = \
 					src->interrupt_in_endpointAddress;\
 		dest->interrupt_in_buffer = src->interrupt_in_buffer;	\
-- 
1.8.1.2

[PATCH 12/93] USB: visor: fix initialisation of Treo/Kyocera devices

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 420021a395ce38b7ab2cceb52dee4038be7d8fa3 upstream.

Fix regression introduced by commit 214916f2e ("USB: visor: reimplement
using generic framework") which broke initialisation of Treo/Kyocera
devices that re-mapped bulk-in endpoints.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/visor.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 90cc160..4b53336 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -570,9 +570,17 @@ static int treo_attach(struct usb_serial *serial)
 	*/
 #define COPY_PORT(dest, src)						\
 	do { \
+		int i;							\
+									\
+		for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) {	\
+			dest->read_urbs[i] = src->read_urbs[i];		\
+			dest->read_urbs[i]->context = dest;		\
+			dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
+		}							\
 		dest->read_urb = src->read_urb;				\
 		dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
 		dest->bulk_in_buffer = src->bulk_in_buffer;		\
+		dest->bulk_in_size = src->bulk_in_size;			\
 		dest->interrupt_in_urb = src->interrupt_in_urb;		\
 		dest->interrupt_in_urb->context = dest;			\
 		dest->interrupt_in_endpointAddress = \
-- 
1.8.1.2

[PATCH 13/93] USB: mos7720: fix DMA to stack

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 72ea18a558ed7a63a50bb121ba60d73b5b38ae30 upstream.

The read_mos_reg function is called with stack-allocated buffers, which
must not be used for control messages.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/mos7720.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index a07dd3c..52b3342 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -234,11 +234,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
 	__u8 requesttype = (__u8)0xc0;
 	__u16 index = get_reg_index(reg);
 	__u16 value = get_reg_value(reg, serial_portnum);
-	int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
-				     index, data, 1, MOS_WDR_TIMEOUT);
-	if (status < 0)
+	u8 *buf;
+	int status;
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, buf, 1, MOS_WDR_TIMEOUT);
+	if (status == 1)
+		*data = *buf;
+	else if (status < 0)
 		dev_err(&usbdev->dev,
 			"mos7720: usb_control_msg() failed: %d", status);
+	kfree(buf);
+
 	return status;
 }
 
-- 
1.8.1.2

[PATCH 14/93] USB: mos7840: fix DMA to stack

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 15ee89c3347fbf58a4361011eda5ac2731e45126 upstream.

Fix regression introduced by commit 0eafe4de1a ("USB: serial: mos7840:
add support for MCS7810 devices") which used stack-allocated buffers for
control messages.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/mos7840.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2727955..dada37f 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2342,13 +2342,21 @@ static int mos7840_ioctl(struct tty_struct *tty,
 static int mos7810_check(struct usb_serial *serial)
 {
 	int i, pass_count = 0;
+	u8 *buf;
 	__u16 data = 0, mcr_data = 0;
 	__u16 test_pattern = 0x55AA;
+	int res;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return 0;	/* failed to identify 7810 */
 
 	/* Store MCR setting */
-	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 		MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
-		&mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	if (res == VENDOR_READ_LENGTH)
+		mcr_data = *buf;
 
 	for (i = 0; i < 16; i++) {
 		/* Send the 1-bit test pattern out to MCS7810 test pin */
@@ -2358,9 +2366,12 @@ static int mos7810_check(struct usb_serial *serial)
 			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
 
 		/* Read the test pattern back */
-		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
-			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		res = usb_control_msg(serial->dev,
+				usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+				MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+				VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		if (res == VENDOR_READ_LENGTH)
+			data = *buf;
 
 		/* If this is a MCS7810 device, both test patterns must match */
 		if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
@@ -2374,6 +2385,8 @@ static int mos7810_check(struct usb_serial *serial)
 		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
 		0, MOS_WDR_TIMEOUT);
 
+	kfree(buf);
+
 	if (pass_count == 16)
 		return 1;
 
@@ -2383,11 +2396,17 @@ static int mos7810_check(struct usb_serial *serial)
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
 	__u16 data = 0x00;
+	u8 *buf;
 	int mos7840_num_ports;
 
-	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
-		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (buf) {
+		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		data = *buf;
+		kfree(buf);
+	}
 
 	if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
 		serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
-- 
1.8.1.2

[PATCH 15/93] USB: ark3116: fix control-message timeout

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 634371911730a462626071065b64cd6e1fe213e0 upstream.

The control-message timeout is specified in milliseconds and should not
depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/ark3116.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 15bd068..f1173df 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -49,7 +49,7 @@ static bool debug;
 #define DRIVER_NAME "ark3116"
 
 /* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x6547, 0x0232) },
-- 
1.8.1.2

[PATCH 16/93] USB: iuu_phoenix: fix bulk-message timeout

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 6c13ff68a7ce01da7a51b44241a7aad8eaaedde7 upstream.

The bulk-message timeout is specified in milliseconds and should not
depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/iuu_phoenix.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 22b1eb5..3e7980a 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -308,7 +308,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 	    usb_bulk_msg(serial->dev,
 			 usb_sndbulkpipe(serial->dev,
 					 port->bulk_out_endpointAddress), buf,
-			 count, &actual, HZ * 1);
+			 count, &actual, 1000);
 
 	if (status != IUU_OPERATION_OK)
 		dbg("%s - error = %2x", __func__, status);
@@ -328,7 +328,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 	    usb_bulk_msg(serial->dev,
 			 usb_rcvbulkpipe(serial->dev,
 					 port->bulk_in_endpointAddress), buf,
-			 count, &actual, HZ * 1);
+			 count, &actual, 1000);
 
 	if (status != IUU_OPERATION_OK)
 		dbg("%s - error = %2x", __func__, status);
-- 
1.8.1.2

[PATCH 17/93] USB: mos7720: fix message timeouts

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 849513a7809175420d353625b6f651d961e99d49 upstream.

The control and bulk-message timeouts are specified in milliseconds and
should not depend on HZ.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/mos7720.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 52b3342..bd42c97 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -44,7 +44,7 @@
 #define DRIVER_DESC "Moschip USB Serial Driver"
 
 /* default urb timeout */
-#define MOS_WDR_TIMEOUT	(HZ * 5)
+#define MOS_WDR_TIMEOUT	5000
 
 #define MOS_MAX_PORT	0x02
 #define MOS_WRITE	0x0E
@@ -2099,7 +2099,7 @@ static int mos7720_startup(struct usb_serial *serial)
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
 
 	/* start the interrupt urb */
 	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -2144,7 +2144,7 @@ static void mos7720_release(struct usb_serial *serial)
 		/* wait for synchronous usb calls to return */
 		if (mos_parport->msg_pending)
 			wait_for_completion_timeout(&mos_parport->syncmsg_compl,
-						    MOS_WDR_TIMEOUT);
+					    msecs_to_jiffies(MOS_WDR_TIMEOUT));
 
 		parport_remove_port(mos_parport->pp);
 		usb_set_serial_data(serial, NULL);
-- 
1.8.1.2

[PATCH 18/93] regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kishon Vijay Abraham I <kishon@ti.com>

commit f232168df0c7e7414b70ac5d8fed83086d441c0b upstream.

regulator_enable_regmap() uses enable_reg to enable the regulator.
But enable_reg for smps10 points to SMPS10_STATUS which is a
read-only register. Fixed the same by having enable_reg
set to SMPS10_CTRL.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/regulator/palmas-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 795f75a..dc568f7 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -675,7 +675,7 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 			pmic->desc[id].vsel_mask = SMPS10_VSEL;
 			pmic->desc[id].enable_reg =
 					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
-							PALMAS_SMPS10_STATUS);
+							PALMAS_SMPS10_CTRL);
 			pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
 		}
 
-- 
1.8.1.2

[PATCH 19/93] m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Finn Thain <fthain@telegraphics.com.au>

commit df66834a43c461de2565c45d815288ba1c0def37 upstream.

The present code does not wait for the SCC to finish resetting itself
before trying to initialise the device. The result is that the SCC
interrupt sources become enabled (if they weren't already). This leads to
an early boot crash (unexpected interrupt) given CONFIG_EARLY_PRINTK. Fix
this by adding a delay. A successful reset disables the interrupt sources.

Also, after the reset for channel A setup, the SCC then gets a second
reset for channel B setup which leaves channel A uninitialised again. Fix
this by performing the reset only once.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/m68k/kernel/head.S | 29 +++++++++++++++++++----------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index d197e7f..ac85f16 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -2752,11 +2752,9 @@ func_return	get_new_page
 #ifdef CONFIG_MAC
 
 L(scc_initable_mac):
-	.byte	9,12		/* Reset */
 	.byte	4,0x44		/* x16, 1 stopbit, no parity */
 	.byte	3,0xc0		/* receiver: 8 bpc */
 	.byte	5,0xe2		/* transmitter: 8 bpc, assert dtr/rts */
-	.byte	9,0		/* no interrupts */
 	.byte	10,0		/* NRZ */
 	.byte	11,0x50		/* use baud rate generator */
 	.byte	12,1,13,0	/* 38400 baud */
@@ -2899,6 +2897,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	is_not_mac(L(serial_init_not_mac))
 
 #ifdef SERIAL_DEBUG
+
 /* You may define either or both of these. */
 #define MAC_USE_SCC_A /* Modem port */
 #define MAC_USE_SCC_B /* Printer port */
@@ -2908,9 +2907,21 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 #define mac_scc_cha_b_data_offset	0x4
 #define mac_scc_cha_a_data_offset	0x6
 
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
+	movel	%pc@(L(mac_sccbase)),%a0
+	/* Reset SCC device */
+	moveb	#9,%a0@(mac_scc_cha_a_ctrl_offset)
+	moveb	#0xc0,%a0@(mac_scc_cha_a_ctrl_offset)
+	/* Wait for 5 PCLK cycles, which is about 68 CPU cycles */
+	/* 5 / 3.6864 MHz = approx. 1.36 us = 68 / 50 MHz */
+	movel	#35,%d0
+5:
+	subq	#1,%d0
+	jne	5b
+#endif
+
 #ifdef MAC_USE_SCC_A
 	/* Initialize channel A */
-	movel	%pc@(L(mac_sccbase)),%a0
 	lea	%pc@(L(scc_initable_mac)),%a1
 5:	moveb	%a1@+,%d0
 	jmi	6f
@@ -2922,9 +2933,6 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 
 #ifdef MAC_USE_SCC_B
 	/* Initialize channel B */
-#ifndef MAC_USE_SCC_A	/* Load mac_sccbase only if needed */
-	movel	%pc@(L(mac_sccbase)),%a0
-#endif	/* MAC_USE_SCC_A */
 	lea	%pc@(L(scc_initable_mac)),%a1
 7:	moveb	%a1@+,%d0
 	jmi	8f
@@ -2933,6 +2941,7 @@ func_start	serial_init,%d0/%d1/%a0/%a1
 	jra	7b
 8:
 #endif	/* MAC_USE_SCC_B */
+
 #endif	/* SERIAL_DEBUG */
 
 	jra	L(serial_init_done)
@@ -3006,17 +3015,17 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 
 #ifdef SERIAL_DEBUG
 
-#ifdef MAC_USE_SCC_A
+#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B)
 	movel	%pc@(L(mac_sccbase)),%a1
+#endif
+
+#ifdef MAC_USE_SCC_A
 3:	btst	#2,%a1@(mac_scc_cha_a_ctrl_offset)
 	jeq	3b
 	moveb	%d0,%a1@(mac_scc_cha_a_data_offset)
 #endif	/* MAC_USE_SCC_A */
 
 #ifdef MAC_USE_SCC_B
-#ifndef MAC_USE_SCC_A	/* Load mac_sccbase only if needed */
-	movel	%pc@(L(mac_sccbase)),%a1
-#endif	/* MAC_USE_SCC_A */
 4:	btst	#2,%a1@(mac_scc_cha_b_ctrl_offset)
 	jeq	4b
 	moveb	%d0,%a1@(mac_scc_cha_b_data_offset)
-- 
1.8.1.2

[PATCH 20/93] USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Butora <robert.butora.fi@gmail.com>

commit 6529591e3eef65f0f528a81ac169f6e294b947a7 upstream.

The patch adds a new HIDCOM device and does not affect other devices
driven by the cypress_M8 module. Changes are:
- add VendorID ProductID to device tables
- skip unstable speed check because FRWD uses 115200bps
- skip reset at probe which is an issue workaround for this
particular device.

Signed-off-by: Robert Butora <robert.butora.fi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/cypress_m8.c | 18 +++++++++++++++++-
 drivers/usb/serial/cypress_m8.h |  4 ++++
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index dec5b2f..83a9b0e 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -70,6 +70,7 @@ static const struct usb_device_id id_table_earthmate[] = {
 static const struct usb_device_id id_table_cyphidcomrs232[] = {
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
 	{ }						/* Terminating entry */
 };
 
@@ -83,6 +84,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
 	{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 	{ }						/* Terminating entry */
 };
@@ -235,6 +237,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
  * Cypress serial helper functions
  *****************************************************************************/
 
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+	return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+		(le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
 
 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 {
@@ -244,6 +252,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 	if (unstable_bauds)
 		return new_rate;
 
+	/* FRWD Dongle uses 115200 bps */
+	if (is_frwd(port->serial->dev))
+		return new_rate;
+
 	/*
 	 * The general purpose firmware for the Cypress M8 allows for
 	 * a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -452,7 +464,11 @@ static int generic_startup(struct usb_serial *serial)
 		return -ENOMEM;
 	}
 
-	usb_reset_configuration(serial->dev);
+	/* Skip reset for FRWD device. It is a workaound:
+	   device hangs if it receives SET_CONFIGURE in Configured
+	   state. */
+	if (!is_frwd(serial->dev))
+		usb_reset_configuration(serial->dev);
 
 	priv->cmd_ctrl = 0;
 	priv->line_control = 0;
diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h
index 67cf608..b461311 100644
--- a/drivers/usb/serial/cypress_m8.h
+++ b/drivers/usb/serial/cypress_m8.h
@@ -24,6 +24,10 @@
 #define VENDOR_ID_CYPRESS		0x04b4
 #define PRODUCT_ID_CYPHIDCOM		0x5500
 
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD			0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD	0x0001
+
 /* Powercom UPS, chip CY7C63723 */
 #define VENDOR_ID_POWERCOM		0x0d9f
 #define PRODUCT_ID_UPS			0x0002
-- 
1.8.1.2

[PATCH 21/93] USB: serial: Add Option GTM681W to qcserial device table.

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 8a2f132a01c2dd4c3905fa560f92019761ed72b1 upstream.

The Option GTM681W uses a qualcomm chip and can be
served by the qcserial device driver.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/qcserial.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 4302733..5fd9122 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -115,6 +115,8 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
 	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
+	{USB_DEVICE(0x0AF0, 0x8120)},	/* Option GTM681W */
+
 	{ }				/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);
-- 
1.8.1.2

[PATCH 22/93] USB: keyspan: fix bogus array index

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit a07088098a650267b2eda689538133a324b9523f upstream.

The outcont_endpoints array was indexed using the port minor number
(which can be greater than the array size) rather than the device port
number.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/keyspan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index a1b9924..2d35ad4 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1670,7 +1670,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	d_details = s_priv->device_details;
 	device_port = port->number - port->serial->minor;
 
-	outcont_urb = d_details->outcont_endpoints[port->number];
+	outcont_urb = d_details->outcont_endpoints[device_port];
 	this_urb = p_priv->outcont_urb;
 
 	dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe));
-- 
1.8.1.2

[PATCH 23/93] USB: mos7720: fix hardware flow control

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit a26f009a070e840fadacb91013b2391ba7ab6cc2 upstream.

The register access to enable hardware flow control depends on the
device port number and not the port minor number.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/mos7720.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index bd42c97..614ad93 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1695,7 +1695,7 @@ static void change_port_settings(struct tty_struct *tty,
 		mos7720_port->shadowMCR |= (UART_MCR_XONANY);
 		/* To set hardware flow control to the specified *
 		 * serial port, in SP1/2_CONTROL_REG             */
-		if (port->number)
+		if (port_number)
 			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
 		else
 			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
-- 
1.8.1.2

[PATCH 24/93] USB: whiteheat: fix broken port configuration

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 9eecf22d2b375b9064a20421c6c307b760b03d46 upstream.

When configuring the port (e.g. set_termios) the port minor number
rather than the port number was used in the request (and they only
coincide for minor number 0).

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/whiteheat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index b65ac03..65e093e 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -727,7 +727,7 @@ static void firm_setup_port(struct tty_struct *tty)
 	struct whiteheat_port_settings port_settings;
 	unsigned int cflag = tty->termios->c_cflag;
 
-	port_settings.port = port->number + 1;
+	port_settings.port = port->number - port->serial->minor + 1;
 
 	/* get the byte size */
 	switch (cflag & CSIZE) {
-- 
1.8.1.2

[PATCH 25/93] USB: option: blacklist network interface on Huawei E1820

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@mork.no>

commit b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 upstream.

The mode used by Windows for the Huawei E1820 will use the
same ff/ff/ff class codes for both serial and network
functions.

Reported-by: Graham Inggs <graham.inggs@uct.ac.za>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 38ea4b7..ccd2d11 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -593,6 +593,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff),	/* Huawei E1820 */
+		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
-- 
1.8.1.2

[PATCH 26/93] iommu/amd: Re-enable IOMMU event log interrupt after handling.

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

commit 925fe08bce38d1ff052fe2209b9e2b8d5fbb7f98 upstream.

Current driver does not clear the IOMMU event log interrupt bit
in the IOMMU status register after processing an interrupt.
This causes the IOMMU hardware to generate event log interrupt only once.
This has been observed in both IOMMU v1 and V2 hardware.
This patch clears the bit by writing 1 to bit 1 of the IOMMU
status register (MMIO Offset 2020h)

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/iommu/amd_iommu.c       | 3 +++
 drivers/iommu/amd_iommu_types.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 33fee0a..257ab08 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -534,6 +534,9 @@ static void iommu_poll_events(struct amd_iommu *iommu)
 	u32 head, tail;
 	unsigned long flags;
 
+	/* enable event interrupts again */
+	writel(MMIO_STATUS_EVT_INT_MASK, iommu->mmio_base + MMIO_STATUS_OFFSET);
+
 	spin_lock_irqsave(&iommu->lock, flags);
 
 	head = readl(iommu->mmio_base + MMIO_EVT_HEAD_OFFSET);
diff --git a/drivers/iommu/amd_iommu_types.h b/drivers/iommu/amd_iommu_types.h
index c1b1d48..f9addfd 100644
--- a/drivers/iommu/amd_iommu_types.h
+++ b/drivers/iommu/amd_iommu_types.h
@@ -99,6 +99,7 @@
 #define PASID_MASK		0x000fffff
 
 /* MMIO status bits */
+#define MMIO_STATUS_EVT_INT_MASK	(1 << 1)
 #define MMIO_STATUS_COM_WAIT_INT_MASK	(1 << 2)
 #define MMIO_STATUS_PPR_INT_MASK	(1 << 6)
 
-- 
1.8.1.2

[PATCH 27/93] iommu/amd: Workaround for ERBT1312

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joerg Roedel <joro@8bytes.org>

commit d3263bc29706e42f74d8800807c2dedf320d77f1 upstream.

Work around an IOMMU  hardware bug where clearing the
EVT_INT or PPR_INT bit in the status register may race with
the hardware trying to set it again. When not handled the
bit might not be cleared and we lose all future event or ppr
interrupts.

Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/iommu/amd_iommu.c | 34 ++++++++++++++++++++++++++--------
 1 file changed, 26 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 257ab08..d3be586 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -531,14 +531,23 @@ retry:
 
 static void iommu_poll_events(struct amd_iommu *iommu)
 {
-	u32 head, tail;
+	u32 head, tail, status;
 	unsigned long flags;
 
-	/* enable event interrupts again */
-	writel(MMIO_STATUS_EVT_INT_MASK, iommu->mmio_base + MMIO_STATUS_OFFSET);
-
 	spin_lock_irqsave(&iommu->lock, flags);
 
+	/* enable event interrupts again */
+	do {
+		/*
+		 * Workaround for Erratum ERBT1312
+		 * Clearing the EVT_INT bit may race in the hardware, so read
+		 * it again and make sure it was really cleared
+		 */
+		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+		writel(MMIO_STATUS_EVT_INT_MASK,
+		       iommu->mmio_base + MMIO_STATUS_OFFSET);
+	} while (status & MMIO_STATUS_EVT_INT_MASK);
+
 	head = readl(iommu->mmio_base + MMIO_EVT_HEAD_OFFSET);
 	tail = readl(iommu->mmio_base + MMIO_EVT_TAIL_OFFSET);
 
@@ -575,16 +584,25 @@ static void iommu_handle_ppr_entry(struct amd_iommu *iommu, u64 *raw)
 static void iommu_poll_ppr_log(struct amd_iommu *iommu)
 {
 	unsigned long flags;
-	u32 head, tail;
+	u32 head, tail, status;
 
 	if (iommu->ppr_log == NULL)
 		return;
 
-	/* enable ppr interrupts again */
-	writel(MMIO_STATUS_PPR_INT_MASK, iommu->mmio_base + MMIO_STATUS_OFFSET);
-
 	spin_lock_irqsave(&iommu->lock, flags);
 
+	/* enable ppr interrupts again */
+	do {
+		/*
+		 * Workaround for Erratum ERBT1312
+		 * Clearing the PPR_INT bit may race in the hardware, so read
+		 * it again and make sure it was really cleared
+		 */
+		status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+		writel(MMIO_STATUS_PPR_INT_MASK,
+		       iommu->mmio_base + MMIO_STATUS_OFFSET);
+	} while (status & MMIO_STATUS_PPR_INT_MASK);
+
 	head = readl(iommu->mmio_base + MMIO_PPR_HEAD_OFFSET);
 	tail = readl(iommu->mmio_base + MMIO_PPR_TAIL_OFFSET);
 
-- 
1.8.1.2

[PATCH 28/93] xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keir Fraser <keir.fraser@citrix.com>

commit bee980d9e9642e96351fa3ca9077b853ecf62f57 upstream.

This avoids any other hardirq handler seeing a very stale jiffies
value immediately after wakeup from a long idle period. The one
observable symptom of this was a USB keyboard, with software keyboard
repeat, which would always repeat a key immediately that it was
pressed. This is due to the key press waking the guest, the key
handler immediately runs, sees an old jiffies value, and then that
jiffies value significantly updated, before the key is unpressed.

Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[ luis: backported to 3.5:
  - replaced xen_ulong_t by unsigned long ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/xen/events.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 99c5345..b5b559a 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -1267,7 +1267,7 @@ static void __xen_evtchn_do_upcall(void)
 {
 	int start_word_idx, start_bit_idx;
 	int word_idx, bit_idx;
-	int i;
+	int i, irq;
 	int cpu = get_cpu();
 	struct shared_info *s = HYPERVISOR_shared_info;
 	struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
@@ -1275,6 +1275,8 @@ static void __xen_evtchn_do_upcall(void)
 
 	do {
 		unsigned long pending_words;
+		unsigned long pending_bits;
+		struct irq_desc *desc;
 
 		vcpu_info->evtchn_upcall_pending = 0;
 
@@ -1285,6 +1287,17 @@ static void __xen_evtchn_do_upcall(void)
 		/* Clear master flag /before/ clearing selector flag. */
 		wmb();
 #endif
+		if ((irq = per_cpu(virq_to_irq, cpu)[VIRQ_TIMER]) != -1) {
+			int evtchn = evtchn_from_irq(irq);
+			word_idx = evtchn / BITS_PER_LONG;
+			pending_bits = evtchn % BITS_PER_LONG;
+			if (active_evtchns(cpu, s, word_idx) & (1ULL << pending_bits)) {
+				desc = irq_to_desc(irq);
+				if (desc)
+					generic_handle_irq_desc(irq, desc);
+			}
+		}
+
 		pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0);
 
 		start_word_idx = __this_cpu_read(current_word_idx);
@@ -1293,7 +1306,6 @@ static void __xen_evtchn_do_upcall(void)
 		word_idx = start_word_idx;
 
 		for (i = 0; pending_words != 0; i++) {
-			unsigned long pending_bits;
 			unsigned long words;
 
 			words = MASK_LSBS(pending_words, word_idx);
@@ -1322,8 +1334,7 @@ static void __xen_evtchn_do_upcall(void)
 
 			do {
 				unsigned long bits;
-				int port, irq;
-				struct irq_desc *desc;
+				int port;
 
 				bits = MASK_LSBS(pending_bits, bit_idx);
 
-- 
1.8.1.2

[PATCH 29/93] thinkpad-acpi: recognize latest V-Series using DMI_BIOS_VENDOR

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Manoj Iyer <manoj.iyer@canonical.com>

commit a4f46bb9fa84642e356898ee44b670989622f8bb upstream.

In the latest V-series bios DMI_PRODUCT_VERSION does not contain
the string Lenovo or Thinkpad, but is set to the model number, this
causes the thinkpad_acpi module to fail to load. Recognize laptop
as Lenovo using DMI_BIOS_VENDOR instead, which is set to Lenovo.

Test on V490u
=============
== After the patch ==

[ 1350.295757] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 1350.295760] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 1350.295761] thinkpad_acpi: ThinkPad BIOS H7ET21WW (1.00 ), EC unknown
[ 1350.295763] thinkpad_acpi: Lenovo LENOVO, model LV5DXXX
[ 1350.296086] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 1350.296694] thinkpad_acpi: radio switch found; radios are enabled
[ 1350.296703] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 1350.306466] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 1350.307082] Registered led device: tpacpi::thinklight
[ 1350.307215] Registered led device: tpacpi::power
[ 1350.307255] Registered led device: tpacpi::standby
[ 1350.307294] Registered led device: tpacpi::thinkvantage
[ 1350.308160] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 1350.308333] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 1350.312287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14

== Before the patch ==
sudo modprobe thinkpad_acpi
FATAL: Error inserting thinkpad_acpi (/lib/modules/3.2.0-27-generic/kernel/drivers/platform/x86/thinkpad_acpi.ko): No such device

Test on B485
=============
This patch was also test in a B485 where the thinkpad_acpi module does not
have any issues loading. But, I tested it to make sure this patch does not
break on already functioning models of Lenovo products.

[13486.746359] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[13486.746364] thinkpad_acpi: http://ibm-acpi.sf.net/
[13486.746368] thinkpad_acpi: ThinkPad BIOS HJET15WW(1.01), EC unknown
[13486.746373] thinkpad_acpi: Lenovo Lenovo LB485, model 814TR01
[13486.747300] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[13486.752435] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[13486.752883] Registered led device: tpacpi::thinklight
[13486.752915] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[13486.753216] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[13486.757147] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input15

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Shuduo Sang <shuduo.sang@canonical.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 8b5610d..aa232de 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8662,6 +8662,13 @@ static int __must_check __init get_thinkpad_model_data(
 		tp->model_str = kstrdup(s, GFP_KERNEL);
 		if (!tp->model_str)
 			return -ENOMEM;
+	} else {
+		s = dmi_get_system_info(DMI_BIOS_VENDOR);
+		if (s && !(strnicmp(s, "Lenovo", 6))) {
+			tp->model_str = kstrdup(s, GFP_KERNEL);
+			if (!tp->model_str)
+				return -ENOMEM;
+		}
 	}
 
 	s = dmi_get_system_info(DMI_PRODUCT_NAME);
-- 
1.8.1.2

[PATCH 30/93] klist: del waiter from klist_remove_waiters before wakeup waitting process

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "wang, biao" <biao.wang@intel.com>

commit ac5a2962b02f57dea76d314ef2521a2170b28ab6 upstream.

There is a race between klist_remove and klist_release. klist_remove
uses a local var waiter saved on stack. When klist_release calls
wake_up_process(waiter->process) to wake up the waiter, waiter might run
immediately and reuse the stack. Then, klist_release calls
list_del(&waiter->list) to change previous
wait data and cause prior waiter thread corrupt.

The patch fixes it against kernel 3.9.

Signed-off-by: wang, biao <biao.wang@intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 lib/klist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/klist.c b/lib/klist.c
index 0874e41..358a368 100644
--- a/lib/klist.c
+++ b/lib/klist.c
@@ -193,10 +193,10 @@ static void klist_release(struct kref *kref)
 		if (waiter->node != n)
 			continue;
 
+		list_del(&waiter->list);
 		waiter->woken = 1;
 		mb();
 		wake_up_process(waiter->process);
-		list_del(&waiter->list);
 	}
 	spin_unlock(&klist_remove_lock);
 	knode_set_klist(n, NULL);
-- 
1.8.1.2

[PATCH 31/93] ACPI video: ignore BIOS backlight value for HP dm4

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo Maciel Dias Vieira <gustavo@sagui.org>

commit 771d09b3c4c45d4d534a83a68e6331b97fd82e15 upstream.

On a HP Pavilion dm4 laptop the BIOS sets minimum backlight on boot,
completely dimming the screen. Ignore this initial value for this
machine.

Signed-off-by: Gustavo Maciel Dias Vieira <gustavo@sagui.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/acpi/video.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 3837739..f3b3027 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -447,6 +447,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13 - 2000 Notebook PC"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Pavilion dm4",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dm4 Notebook PC"),
+		},
+	},
 	{}
 };
 
-- 
1.8.1.2

[PATCH 32/93] ACPI video: ignore BIOS initial backlight value for HP 1000

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Hung <alex.hung@canonical.com>

commit 4ef366c583d6180b1c951147869ee5a3038834f2 upstream.

On HP 1000 lapops, BIOS reports minimum backlight on boot and
causes backlight to dim completely. This ignores the initial backlight
values and set to max brightness.

References:: https://bugs.launchpad.net/bugs/1167760
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/acpi/video.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index f3b3027..55c9ae7 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -455,6 +455,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dm4 Notebook PC"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP 1000 Notebook PC",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP 1000 Notebook PC"),
+		},
+	},
 	{}
 };
 
-- 
1.8.1.2

[PATCH 33/93] dmaengine: ste_dma40: fix pm runtime ref counting

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rabin Vincent <rabin.vincent@stericsson.com>

commit 9ecb41bd8cf002fd8f3e063db4df81647ddd623c upstream.

The pm runtime reference counting of the driver is broken for the case
when there is more than one transfer queued, leading to the device being
runtime suspend while active.  Fix it.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/dma/ste_dma40.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 000d309..aec952f 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -1393,10 +1393,13 @@ static void dma_tc_handle(struct d40_chan *d40c)
 			return;
 		}
 
-		if (d40_queue_start(d40c) == NULL)
+		if (d40_queue_start(d40c) == NULL) {
 			d40c->busy = false;
-		pm_runtime_mark_last_busy(d40c->base->dev);
-		pm_runtime_put_autosuspend(d40c->base->dev);
+
+			pm_runtime_mark_last_busy(d40c->base->dev);
+			pm_runtime_put_autosuspend(d40c->base->dev);
+		}
+
 	}
 
 	d40c->pending_tx++;
-- 
1.8.1.2

[PATCH 34/93] ACPI / video: ignore BIOS initial backlight value for HP m4

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Hung <alex.hung@canonical.com>

commit fedbe9bc6fd3e14b1ffbb3dac407777ac4a3650c upstream.

On HP m4 lapops, BIOS reports minimum backlight on boot and
causes backlight to dim completely. This ignores the initial backlight
values and set to max brightness.

References: https://bugs.launchpad.net/bugs/1184501
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/acpi/video.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 55c9ae7..a4d9f5d 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -463,6 +463,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "HP 1000 Notebook PC"),
 		},
 	},
+	{
+	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Pavilion m4",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion m4 Notebook PC"),
+		},
+	},
 	{}
 };
 
-- 
1.8.1.2

[PATCH 35/93] ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ash Willis <ashwillis.kernel@gmail.com>

commit 780a6ec640a3fed671fc2c40e4dd30c03eca3ac3 upstream.

This patch addresses kernel bug 56661. BIOS reports an incorrect
backlight value, causing the driver to switch off the backlight
completely during startup. This patch ignores the incorrect value from
BIOS.

References: https://bugzilla.kernel.org/show_bug.cgi?id=56661
Signed-off-by: Ash Willis <ashwillis@programmer.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/acpi/video.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a4d9f5d..403283d 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -457,6 +457,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 	},
 	{
 	 .callback = video_ignore_initial_backlight,
+	 .ident = "HP Pavilion g6 Notebook PC",
+	 .matches = {
+		 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		 DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"),
+		},
+	},
+	{
+	 .callback = video_ignore_initial_backlight,
 	 .ident = "HP 1000 Notebook PC",
 	 .matches = {
 		DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-- 
1.8.1.2

[PATCH 36/93] ALSA: usb-audio: fix Roland/Cakewalk UM-3G support

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Clemens Ladisch <clemens@ladisch.de>

commit a0c6d309c6df14655f9962f666d1da96318b0b7c upstream.

Commit 927c9423dd5f2d1c0b93d5e694ab84b4a5559713 (ALSA: usb-audio: add
Edirol UM-3G support) used a wrong quirk type, which would make the
driver refuse to attach with the error message "MIDIStreaming interface
descriptor not found".

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 sound/usb/quirks-table.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 128eb0c..1375633 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -1622,7 +1622,11 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.ifnum = 0,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE
+		.type = QUIRK_MIDI_FIXED_ENDPOINT,
+		.data = & (const struct snd_usb_midi_endpoint_info) {
+			.out_cables = 0x0007,
+			.in_cables  = 0x0007
+		}
 	}
 },
 {
-- 
1.8.1.2

[PATCH 37/93] drm: fix a use-after-free when GPU acceleration disabled

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit b7ea85a4fed37835eec78a7be3039c8dc22b8178 upstream.

When GPU acceleration is disabled, drm_vblank_cleanup() will free the
vblank-related data, such as vblank_refcount, vblank_inmodeset, etc.
But we found that drm_vblank_post_modeset() may be called after the
cleanup, which use vblank_refcount and vblank_inmodeset. And this will
cause a kernel panic.

Fix this by return immediately if dev->num_crtcs is zero. This is the
same thing that drm_vblank_pre_modeset() does.

Call trace of a drm_vblank_post_modeset() after drm_vblank_cleanup():
[   62.628906] [<ffffffff804868d0>] drm_vblank_post_modeset+0x34/0xb4
[   62.628906] [<ffffffff804c7008>] atombios_crtc_dpms+0xb4/0x174
[   62.628906] [<ffffffff804c70e0>] atombios_crtc_commit+0x18/0x38
[   62.628906] [<ffffffff8047f038>] drm_crtc_helper_set_mode+0x304/0x3cc
[   62.628906] [<ffffffff8047f92c>] drm_crtc_helper_set_config+0x6d8/0x988
[   62.628906] [<ffffffff8047dd40>] drm_fb_helper_set_par+0x94/0x104
[   62.628906] [<ffffffff80439d14>] fbcon_init+0x424/0x57c
[   62.628906] [<ffffffff8046a638>] visual_init+0xb8/0x118
[   62.628906] [<ffffffff8046b9f8>] take_over_console+0x238/0x384
[   62.628906] [<ffffffff80436df8>] fbcon_takeover+0x7c/0xdc
[   62.628906] [<ffffffff8024fa20>] notifier_call_chain+0x44/0x94
[   62.628906] [<ffffffff8024fcbc>] __blocking_notifier_call_chain+0x48/0x68
[   62.628906] [<ffffffff8042d990>] register_framebuffer+0x228/0x260
[   62.628906] [<ffffffff8047e010>] drm_fb_helper_single_fb_probe+0x260/0x314
[   62.628906] [<ffffffff8047e2c4>] drm_fb_helper_initial_config+0x200/0x234
[   62.628906] [<ffffffff804e5560>] radeon_fbdev_init+0xd4/0xf4
[   62.628906] [<ffffffff804e0e08>] radeon_modeset_init+0x9bc/0xa18
[   62.628906] [<ffffffff804bfc14>] radeon_driver_load_kms+0xdc/0x12c
[   62.628906] [<ffffffff8048b548>] drm_get_pci_dev+0x148/0x238
[   62.628906] [<ffffffff80423564>] local_pci_probe+0x5c/0xd0
[   62.628906] [<ffffffff80241ac4>] work_for_cpu_fn+0x1c/0x30
[   62.628906] [<ffffffff802427c8>] process_one_work+0x274/0x3bc
[   62.628906] [<ffffffff80242934>] process_scheduled_works+0x24/0x44
[   62.628906] [<ffffffff8024515c>] worker_thread+0x31c/0x3f4
[   62.628906] [<ffffffff802497a8>] kthread+0x88/0x90
[   62.628906] [<ffffffff80206794>] kernel_thread_helper+0x10/0x18

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Binbin Zhou <zhoubb@lemote.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/drm_irq.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index c798eea..c7a1348 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -981,7 +981,7 @@ EXPORT_SYMBOL(drm_vblank_off);
  */
 void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
 {
-	/* vblank is not initialized (IRQ not installed ?) */
+	/* vblank is not initialized (IRQ not installed ?), or has been freed */
 	if (!dev->num_crtcs)
 		return;
 	/*
@@ -1003,6 +1003,10 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
 {
 	unsigned long irqflags;
 
+	/* vblank is not initialized (IRQ not installed ?), or has been freed */
+	if (!dev->num_crtcs)
+		return;
+
 	if (dev->vblank_inmodeset[crtc]) {
 		spin_lock_irqsave(&dev->vbl_lock, irqflags);
 		dev->vblank_disable_allowed = 1;
-- 
1.8.1.2

[PATCH 38/93] drm/mgag200: Add missing write to index before accessing data register

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christopher Harvey <charvey@matrox.com>

commit 91f8f105f2b82b4a38dee2d74760bc39d40ec42c upstream.

This is a bug fix for some versions of g200se cards while doing
mode-setting.

Signed-off-by: Christopher Harvey <charvey@matrox.com>
Tested-by: Julia Lemire <jlemire@matrox.com>
Acked-by: Julia Lemire <jlemire@matrox.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/mgag200/mgag200_mode.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 4860c35..4e48f91 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1042,13 +1042,14 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
 			else
 				hi_pri_lvl = 5;
 
-			WREG8(0x1fde, 0x06);
-			WREG8(0x1fdf, hi_pri_lvl);
+			WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
+			WREG8(MGAREG_CRTCEXT_DATA, hi_pri_lvl);
 		} else {
+			WREG8(MGAREG_CRTCEXT_INDEX, 0x06);
 			if (mdev->reg_1e24 >= 0x01)
-				WREG8(0x1fdf, 0x03);
+				WREG8(MGAREG_CRTCEXT_DATA, 0x03);
 			else
-				WREG8(0x1fdf, 0x04);
+				WREG8(MGAREG_CRTCEXT_DATA, 0x04);
 		}
 	}
 	return 0;
-- 
1.8.1.2

[PATCH 39/93] drm/i915: no lvds quirk for hp t5740

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Mesman <ben@bnc.nl>

commit 45a211d75137b1ac869a8a758a6667f15827a115 upstream.

Last year, a patch was made for the "HP t5740e Thin Client" (see
http://lists.freedesktop.org/archives/dri-devel/2012-May/023245.html).
This device reports an lvds panel, but does not really have one.

The predecessor of this device is the "hp t5740", which also does not have
an lvds panel. This patch will add the same quirk for this device.

Signed-off-by: Ben Mesman <ben@bnc.nl>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/i915/intel_lvds.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6d6bf60..d18c49a 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -746,10 +746,10 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	},
 	{
 		.callback = intel_no_lvds_dmi_callback,
-		.ident = "Hewlett-Packard HP t5740e Thin Client",
+		.ident = "Hewlett-Packard HP t5740",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"),
+			DMI_MATCH(DMI_PRODUCT_NAME, " t5740"),
 		},
 	},
 	{
-- 
1.8.1.2

[PATCH 40/93] radeon: Fix system hang issue when using KMS with older cards

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: =?UTF-8?q?Adis=20Hamzi=C4=87?= <adis@hamzadis.com>

commit e49f3959a96dc279860af7e86e6dbcfda50580a5 upstream.

The current radeon driver initialization routines, when using KMS, are written
so that the IRQ installation routine is called before initializing the WB buffer
and the CP rings. With some ASICs, though, the IRQ routine tries to access the
GFX_INDEX ring causing a call to RREG32 with the value of -1 in
radeon_fence_read. This, in turn causes the system to completely hang with some
cards, requiring a hard reset.

A call stack that can cause such a hang looks like this (using rv515 ASIC for the
example here):
 * rv515_init (rv515.c)
 * radeon_irq_kms_init (radeon_irq_kms.c)
 * drm_irq_install (drm_irq.c)
 * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c)
 * rs600_irq_process (rs600.c)
 * radeon_fence_process - due to SW interrupt (radeon_fence.c)
 * radeon_fence_read (radeon_fence.c)
 * hang due to RREG32(-1)

The patch moves the IRQ installation to the card startup routine, after the ring
has been initialized, but before the IRQ has been set. This fixes the issue, but
requires a check to see if the IRQ is already installed, as is the case in the
system resume codepath.
I have tested the patch on three machines using the rv515, the rv770 and the
evergreen ASIC. They worked without issues.

This seems to be a known issue and has been reported on several bug tracking
sites by various distributions (see links below). Most of reports recommend
booting the system with KMS disabled and then enabling KMS by reloading the
radeon module. For some reason, this was indeed a usable workaround, however,
UMS is now deprecated and disabled by default.

Bug reports:
https://bugzilla.redhat.com/show_bug.cgi?id=845745
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789
https://bbs.archlinux.org/viewtopic.php?id=156964

Signed-off-by: Adis Hamzić <adis@hamzadis.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/radeon/evergreen.c | 10 ++++++----
 drivers/gpu/drm/radeon/ni.c        | 10 ++++++----
 drivers/gpu/drm/radeon/r100.c      |  9 ++++++---
 drivers/gpu/drm/radeon/r300.c      |  9 ++++++---
 drivers/gpu/drm/radeon/r420.c      | 10 ++++++----
 drivers/gpu/drm/radeon/r520.c      |  9 ++++++---
 drivers/gpu/drm/radeon/r600.c      | 10 ++++++----
 drivers/gpu/drm/radeon/rs400.c     |  9 ++++++---
 drivers/gpu/drm/radeon/rs600.c     |  9 ++++++---
 drivers/gpu/drm/radeon/rs690.c     |  9 ++++++---
 drivers/gpu/drm/radeon/rv515.c     |  9 ++++++---
 drivers/gpu/drm/radeon/rv770.c     | 10 ++++++----
 drivers/gpu/drm/radeon/si.c        | 10 ++++++----
 13 files changed, 78 insertions(+), 45 deletions(-)

diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index d18b343..7dbb1aa 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -3120,6 +3120,12 @@ static int evergreen_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r = r600_irq_init(rdev);
 	if (r) {
 		DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -3264,10 +3270,6 @@ int evergreen_init(struct radeon_device *rdev)
 	if (r)
 		return r;
 
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
-
 	rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
 	r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
 
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 137b1f5..8d2a168 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1313,6 +1313,12 @@ static int cayman_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r = r600_irq_init(rdev);
 	if (r) {
 		DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -1441,10 +1447,6 @@ int cayman_init(struct radeon_device *rdev)
 	if (r)
 		return r;
 
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
-
 	ring->ring_obj = NULL;
 	r600_ring_init(rdev, ring, 1024 * 1024);
 
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index fb44e7e..fe70204 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -3896,6 +3896,12 @@ static int r100_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r100_irq_set(rdev);
 	rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
 	/* 1M ring buffer */
@@ -4054,9 +4060,6 @@ int r100_init(struct radeon_device *rdev)
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
 	/* Memory manager */
 	r = radeon_bo_init(rdev);
 	if (r)
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 97722a3..30ec27a 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -1382,6 +1382,12 @@ static int r300_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r100_irq_set(rdev);
 	rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
 	/* 1M ring buffer */
@@ -1519,9 +1525,6 @@ int r300_init(struct radeon_device *rdev)
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
 	/* Memory manager */
 	r = radeon_bo_init(rdev);
 	if (r)
diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c
index 99137be..1cf55d9 100644
--- a/drivers/gpu/drm/radeon/r420.c
+++ b/drivers/gpu/drm/radeon/r420.c
@@ -265,6 +265,12 @@ static int r420_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r100_irq_set(rdev);
 	rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
 	/* 1M ring buffer */
@@ -414,10 +420,6 @@ int r420_init(struct radeon_device *rdev)
 	if (r) {
 		return r;
 	}
-	r = radeon_irq_kms_init(rdev);
-	if (r) {
-		return r;
-	}
 	/* Memory manager */
 	r = radeon_bo_init(rdev);
 	if (r) {
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index b5cf837..36b7a5c 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -194,6 +194,12 @@ static int r520_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	rs600_irq_set(rdev);
 	rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
 	/* 1M ring buffer */
@@ -299,9 +305,6 @@ int r520_init(struct radeon_device *rdev)
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
 	/* Memory manager */
 	r = radeon_bo_init(rdev);
 	if (r)
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 0c7476d..ffaf3ba 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2401,6 +2401,12 @@ int r600_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r = r600_irq_init(rdev);
 	if (r) {
 		DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -2548,10 +2554,6 @@ int r600_init(struct radeon_device *rdev)
 	if (r)
 		return r;
 
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
-
 	rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
 	r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
 
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index a464eb5..9ada7ed 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -417,6 +417,12 @@ static int rs400_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r100_irq_set(rdev);
 	rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
 	/* 1M ring buffer */
@@ -538,9 +544,6 @@ int rs400_init(struct radeon_device *rdev)
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
 	/* Memory manager */
 	r = radeon_bo_init(rdev);
 	if (r)
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index e95c5e6..d0eea5c 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -899,6 +899,12 @@ static int rs600_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	rs600_irq_set(rdev);
 	rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
 	/* 1M ring buffer */
@@ -1026,9 +1032,6 @@ int rs600_init(struct radeon_device *rdev)
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
 	/* Memory manager */
 	r = radeon_bo_init(rdev);
 	if (r)
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 159b6a4..bcfb0a3 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -628,6 +628,12 @@ static int rs690_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	rs600_irq_set(rdev);
 	rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
 	/* 1M ring buffer */
@@ -756,9 +762,6 @@ int rs690_init(struct radeon_device *rdev)
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
 	/* Memory manager */
 	r = radeon_bo_init(rdev);
 	if (r)
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 5e70fcb..3368c8c 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -386,6 +386,12 @@ static int rv515_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	rs600_irq_set(rdev);
 	rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL);
 	/* 1M ring buffer */
@@ -518,9 +524,6 @@ int rv515_init(struct radeon_device *rdev)
 	r = radeon_fence_driver_init(rdev);
 	if (r)
 		return r;
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
 	/* Memory manager */
 	r = radeon_bo_init(rdev);
 	if (r)
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b4f51c5..3b8e95a 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -931,6 +931,12 @@ static int rv770_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r = r600_irq_init(rdev);
 	if (r) {
 		DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -1062,10 +1068,6 @@ int rv770_init(struct radeon_device *rdev)
 	if (r)
 		return r;
 
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
-
 	rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL;
 	r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024);
 
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index df76c27..97b89b7 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -3747,6 +3747,12 @@ static int si_startup(struct radeon_device *rdev)
 	}
 
 	/* Enable IRQ */
+	if (!rdev->irq.installed) {
+		r = radeon_irq_kms_init(rdev);
+		if (r)
+			return r;
+	}
+
 	r = si_irq_init(rdev);
 	if (r) {
 		DRM_ERROR("radeon: IH init failed (%d).\n", r);
@@ -3911,10 +3917,6 @@ int si_init(struct radeon_device *rdev)
 	if (r)
 		return r;
 
-	r = radeon_irq_kms_init(rdev);
-	if (r)
-		return r;
-
 	ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX];
 	ring->ring_obj = NULL;
 	r600_ring_init(rdev, ring, 1024 * 1024);
-- 
1.8.1.2

[PATCH 41/93] drm/radeon: don't allow audio on DCE6

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 1cbcca302a318499f20a512847c5d6a510c08c35 upstream.

It's not supported yet.  Fixes display issues when
users force it on.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/radeon/atombios_encoders.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c
index 74cc710..66ecc38 100644
--- a/drivers/gpu/drm/radeon/atombios_encoders.c
+++ b/drivers/gpu/drm/radeon/atombios_encoders.c
@@ -396,6 +396,8 @@ atombios_digital_setup(struct drm_encoder *encoder, int action)
 int
 atombios_get_encoder_mode(struct drm_encoder *encoder)
 {
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct drm_connector *connector;
 	struct radeon_connector *radeon_connector;
@@ -421,7 +423,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
 	case DRM_MODE_CONNECTOR_DVII:
 	case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
 		if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
-		    radeon_audio)
+		    radeon_audio &&
+		    !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
 			return ATOM_ENCODER_MODE_HDMI;
 		else if (radeon_connector->use_digital)
 			return ATOM_ENCODER_MODE_DVI;
@@ -432,7 +435,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
 	case DRM_MODE_CONNECTOR_HDMIA:
 	default:
 		if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
-		    radeon_audio)
+		    radeon_audio &&
+		    !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
 			return ATOM_ENCODER_MODE_HDMI;
 		else
 			return ATOM_ENCODER_MODE_DVI;
@@ -446,7 +450,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
 		    (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP))
 			return ATOM_ENCODER_MODE_DP;
 		else if (drm_detect_hdmi_monitor(radeon_connector->edid) &&
-			 radeon_audio)
+			 radeon_audio &&
+			 !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */
 			return ATOM_ENCODER_MODE_HDMI;
 		else
 			return ATOM_ENCODER_MODE_DVI;
-- 
1.8.1.2

[PATCH 42/93] ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 8eafc0a161123d90617c9ca2eddfe87b382b1b89 upstream.

... instead of applying to all interfaces.

Reference: http://forums.gentoo.org/viewtopic-p-6886404.html

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 sound/usb/quirks-table.h | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 1375633..cfb8033 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -157,7 +157,13 @@
 	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
 },
 {
-	USB_DEVICE(0x046d, 0x0990),
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+	.idVendor = 0x046d,
+	.idProduct = 0x0990,
+	.bInterfaceClass = USB_CLASS_AUDIO,
+	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL,
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.vendor_name = "Logitech, Inc.",
 		.product_name = "QuickCam Pro 9000",
-- 
1.8.1.2

[PATCH 43/93] drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC.

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Egbert Eich <eich@suse.de>

commit 53d3b4d7778daf15900867336c85d3f8dd70600c upstream.

In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used
for DDC. Thus the code will always have to rely on a LVDS panel
mode supplied by VBT.
In most cases this succeeds, so this didn't get detected for quite
a while.

This regression seems to have been introduced in

commit f899fc64cda8569d0529452aafc0da31c042df2e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 20 15:44:45 2010 -0700

    drm/i915: use GMBUS to manage i2c links

Signed-off-by: Egbert Eich <eich@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add note about which commit likely introduced this issue.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/i915/intel_sdvo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 1af5db5..63b53d2 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1595,7 +1595,7 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 	 * Assume that the preferred modes are
 	 * arranged in priority order.
 	 */
-	intel_ddc_get_modes(connector, intel_sdvo->i2c);
+	intel_ddc_get_modes(connector, &intel_sdvo->ddc);
 	if (list_empty(&connector->probed_modes) == false)
 		goto end;
 
-- 
1.8.1.2

[PATCH 44/93] ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 11e7064f35bb87da8f427d1aa4bbd8b7473a3993 upstream.

USB audio driver spews an error message when probing Logitech HD
webcam c270:
  ALSA mixer.c:1300 usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong.
  ALSA mixer.c:1304 usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1

Obviously the device needs a fixed volume resolution (cval->res = 384)
like other Logitech devices.

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=821735

Reported-and-tested-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 sound/usb/mixer.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 4d8ddc6..a3308e1 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -842,6 +842,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval,
 	case USB_ID(0x046d, 0x0808):
 	case USB_ID(0x046d, 0x0809):
 	case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+	case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
 	case USB_ID(0x046d, 0x0991):
 	/* Most audio usb devices lie about volume resolution.
 	 * Most Logitech webcams have res = 384.
-- 
1.8.1.2

[PATCH 45/93] ARM: 7742/1: topology: export cpu_topology

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 92bdd3f5eba299b33c2f4407977d6fa2e2a6a0da upstream.

The cpu_topology symbol is required by any driver using the topology
interfaces, which leads to a couple of build errors:

ERROR: "cpu_topology" [drivers/net/ethernet/sfc/sfc.ko] undefined!
ERROR: "cpu_topology" [drivers/cpufreq/arm_big_little.ko] undefined!
ERROR: "cpu_topology" [drivers/block/mtip32xx/mtip32xx.ko] undefined!

The obvious solution is to export this symbol.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/arm/kernel/topology.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 8200dea..140c817 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -13,6 +13,7 @@
 
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/node.h>
@@ -42,6 +43,7 @@
 #define MPIDR_LEVEL2_SHIFT 16
 
 struct cputopo_arm cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
 
 const struct cpumask *cpu_coregroup_mask(int cpu)
 {
-- 
1.8.1.2

[PATCH 46/93] ARM: 7743/1: compressed/head.S: work around new binutils warning

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit da94a829305f1c217cfdf6771cb1faca0917e3b9 upstream.

In August 2012, Matthew Gretton-Dann checked a change into binutils
labelled "Error on obsolete & warn on deprecated registers", apparently as
part of ARMv8 support. Apparently, this was supposed to emit the message
"Warning: This coprocessor register access is deprecated in ARMv8" when
using certain mcr/mrc instructions and building for ARMv8. Unfortunately,
the message that is actually emitted appears to be '(null)', which is
less helpful in comparison.

Even more unfortunately, this is biting us on every single kernel
build with a new gas, because arch/arm/boot/compressed/head.S and some
other files in that directory are built with -march=all since kernel
commit 80cec14a8 "[ARM] Add -march=all to assembly file build in
arch/arm/boot/compressed" back in v2.6.28.

This patch reverts Russell's nice solution and instead marks the head.S
file to be built for armv7-a, which fortunately lets us build all
instructions in that file without warnings even on the broken binutils.

Without this patch, building anything results in:

arch/arm/boot/compressed/head.S: Assembler messages:
arch/arm/boot/compressed/head.S:565: Warning: (null)
arch/arm/boot/compressed/head.S:676: Warning: (null)
arch/arm/boot/compressed/head.S:698: Warning: (null)
arch/arm/boot/compressed/head.S:722: Warning: (null)
arch/arm/boot/compressed/head.S:726: Warning: (null)
arch/arm/boot/compressed/head.S:957: Warning: (null)
arch/arm/boot/compressed/head.S:996: Warning: (null)
arch/arm/boot/compressed/head.S:997: Warning: (null)
arch/arm/boot/compressed/head.S:1027: Warning: (null)
arch/arm/boot/compressed/head.S:1035: Warning: (null)
arch/arm/boot/compressed/head.S:1046: Warning: (null)
arch/arm/boot/compressed/head.S:1060: Warning: (null)
arch/arm/boot/compressed/head.S:1092: Warning: (null)
arch/arm/boot/compressed/head.S:1094: Warning: (null)
arch/arm/boot/compressed/head.S:1095: Warning: (null)
arch/arm/boot/compressed/head.S:1102: Warning: (null)
arch/arm/boot/compressed/head.S:1134: Warning: (null)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Gretton-Dann <matthew.gretton-dann@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[ luis: backport to 3.5:
  - adjusted asflags-y in Makefile ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/arm/boot/compressed/Makefile      | 2 +-
 arch/arm/boot/compressed/head-sa1100.S | 1 +
 arch/arm/boot/compressed/head-shark.S  | 1 +
 arch/arm/boot/compressed/head.S        | 1 +
 4 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index bb26756..8504174 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -126,7 +126,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 ccflags-y := -fpic -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all
+asflags-y :=
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 6179d94..3115e31 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -11,6 +11,7 @@
 #include <asm/mach-types.h>
 
 		.section        ".start", "ax"
+		.arch	armv4
 
 __SA1100_start:
 
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
index 089c560..92b5689 100644
--- a/arch/arm/boot/compressed/head-shark.S
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -18,6 +18,7 @@
 	
 		.section	".start", "ax"
 
+		.arch armv4
 		b	__beginning
 	
 __ofw_data:	.long	0				@ the number of memory blocks
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index bc67cbf..a7ae392 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -10,6 +10,7 @@
  */
 #include <linux/linkage.h>
 
+	.arch	armv7-a
 /*
  * Debugging stuff
  *
-- 
1.8.1.2

[PATCH 47/93] hwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit 591bfcfc334a003ba31c0deff03b22e73349939b upstream.

On a system with both MAX1617 and JC42 sensors, JC42 sensors can be misdetected
as LM84. Strengthen detection sufficiently enough to avoid this misdetection.
Also improve detection for ADM1021.

Modeled after chip detection code in sensors-detect command.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jean Delvare <khali@linux-fr.org>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/hwmon/adm1021.c | 58 ++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 50 insertions(+), 8 deletions(-)

diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 4394e7e..5653461 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -332,26 +332,68 @@ static int adm1021_detect(struct i2c_client *client,
 	man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
 	dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
 
+	if (man_id < 0 || dev_id < 0)
+		return -ENODEV;
+
 	if (man_id == 0x4d && dev_id == 0x01)
 		type_name = "max1617a";
 	else if (man_id == 0x41) {
 		if ((dev_id & 0xF0) == 0x30)
 			type_name = "adm1023";
-		else
+		else if ((dev_id & 0xF0) == 0x00)
 			type_name = "adm1021";
+		else
+			return -ENODEV;
 	} else if (man_id == 0x49)
 		type_name = "thmc10";
 	else if (man_id == 0x23)
 		type_name = "gl523sm";
 	else if (man_id == 0x54)
 		type_name = "mc1066";
-	/* LM84 Mfr ID in a different place, and it has more unused bits */
-	else if (conv_rate == 0x00
-		 && (config & 0x7F) == 0x00
-		 && (status & 0xAB) == 0x00)
-		type_name = "lm84";
-	else
-		type_name = "max1617";
+	else {
+		int lte, rte, lhi, rhi, llo, rlo;
+
+		/* extra checks for LM84 and MAX1617 to avoid misdetections */
+
+		llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0));
+		rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1));
+
+		/* fail if any of the additional register reads failed */
+		if (llo < 0 || rlo < 0)
+			return -ENODEV;
+
+		lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0));
+		rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1));
+		lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0));
+		rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1));
+
+		/*
+		 * Fail for negative temperatures and negative high limits.
+		 * This check also catches read errors on the tested registers.
+		 */
+		if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0)
+			return -ENODEV;
+
+		/* fail if all registers hold the same value */
+		if (lte == rte && lte == lhi && lte == rhi && lte == llo
+		    && lte == rlo)
+			return -ENODEV;
+
+		/*
+		 * LM84 Mfr ID is in a different place,
+		 * and it has more unused bits.
+		 */
+		if (conv_rate == 0x00
+		    && (config & 0x7F) == 0x00
+		    && (status & 0xAB) == 0x00) {
+			type_name = "lm84";
+		} else {
+			/* fail if low limits are larger than high limits */
+			if ((s8)llo > lhi || (s8)rlo > rhi)
+				return -ENODEV;
+			type_name = "max1617";
+		}
+	}
 
 	pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
 		 type_name, i2c_adapter_id(adapter), client->addr);
-- 
1.8.1.2

[PATCH 48/93] hpfs: drop vmtruncate

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marco Stornelli <marco.stornelli@gmail.com>

commit 70b31c4c88e253f4c2066367401118edab957614 upstream.

Removed vmtruncate

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/hpfs/file.c    | 20 +++++++++++++-------
 fs/hpfs/hpfs_fn.h |  1 +
 fs/hpfs/inode.c   |  5 ++++-
 3 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 89d2a58..fbfe2df 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -50,7 +50,7 @@ static secno hpfs_bmap(struct inode *inode, unsigned file_secno)
 	return disk_secno;
 }
 
-static void hpfs_truncate(struct inode *i)
+void hpfs_truncate(struct inode *i)
 {
 	if (IS_IMMUTABLE(i)) return /*-EPERM*/;
 	hpfs_lock_assert(i->i_sb);
@@ -105,6 +105,16 @@ static int hpfs_readpage(struct file *file, struct page *page)
 	return block_read_full_page(page,hpfs_get_block);
 }
 
+static void hpfs_write_failed(struct address_space *mapping, loff_t to)
+{
+	struct inode *inode = mapping->host;
+
+	if (to > inode->i_size) {
+		truncate_pagecache(inode, to, inode->i_size);
+		hpfs_truncate(inode);
+	}
+}
+
 static int hpfs_write_begin(struct file *file, struct address_space *mapping,
 			loff_t pos, unsigned len, unsigned flags,
 			struct page **pagep, void **fsdata)
@@ -115,11 +125,8 @@ static int hpfs_write_begin(struct file *file, struct address_space *mapping,
 	ret = cont_write_begin(file, mapping, pos, len, flags, pagep, fsdata,
 				hpfs_get_block,
 				&hpfs_i(mapping->host)->mmu_private);
-	if (unlikely(ret)) {
-		loff_t isize = mapping->host->i_size;
-		if (pos + len > isize)
-			vmtruncate(mapping->host, isize);
-	}
+	if (unlikely(ret))
+		hpfs_write_failed(mapping, pos + len);
 
 	return ret;
 }
@@ -166,6 +173,5 @@ const struct file_operations hpfs_file_ops =
 
 const struct inode_operations hpfs_file_iops =
 {
-	.truncate	= hpfs_truncate,
 	.setattr	= hpfs_setattr,
 };
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index c07ef1f..2623e7e 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -252,6 +252,7 @@ void hpfs_set_ea(struct inode *, struct fnode *, const char *,
 /* file.c */
 
 int hpfs_file_fsync(struct file *, loff_t, loff_t, int);
+void hpfs_truncate(struct inode *);
 extern const struct file_operations hpfs_file_ops;
 extern const struct inode_operations hpfs_file_iops;
 extern const struct address_space_operations hpfs_aops;
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index ed671e0..4c57a50 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -274,9 +274,12 @@ int hpfs_setattr(struct dentry *dentry, struct iattr *attr)
 
 	if ((attr->ia_valid & ATTR_SIZE) &&
 	    attr->ia_size != i_size_read(inode)) {
-		error = vmtruncate(inode, attr->ia_size);
+		error = inode_newsize_ok(inode, attr->ia_size);
 		if (error)
 			goto out_unlock;
+
+		truncate_setsize(inode, attr->ia_size);
+		hpfs_truncate(inode);
 	}
 
 	setattr_copy(inode, attr);
-- 
1.8.1.2

[PATCH 49/93] hpfs: fix warnings when the filesystem fills up

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>

commit bbd465df73f0d8ba41b8a0732766a243d0f5b356 upstream.

This patch fixes warnings due to missing lock on write error path.

  WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]()
  Hardware name: empty
  Pid: 26563, comm: dd Tainted: P           O 3.9.4 #12
  Call Trace:
    hpfs_truncate+0x75/0x80 [hpfs]
    hpfs_write_begin+0x84/0x90 [hpfs]
    _hpfs_bmap+0x10/0x10 [hpfs]
    generic_file_buffered_write+0x121/0x2c0
    __generic_file_aio_write+0x1c7/0x3f0
    generic_file_aio_write+0x7c/0x100
    do_sync_write+0x98/0xd0
    hpfs_file_write+0xd/0x50 [hpfs]
    vfs_write+0xa2/0x160
    sys_write+0x51/0xa0
    page_fault+0x22/0x30
    system_call_fastpath+0x1a/0x1f

Signed-off-by: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/hpfs/file.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index fbfe2df..4816908 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -109,10 +109,14 @@ static void hpfs_write_failed(struct address_space *mapping, loff_t to)
 {
 	struct inode *inode = mapping->host;
 
+	hpfs_lock(inode->i_sb);
+
 	if (to > inode->i_size) {
 		truncate_pagecache(inode, to, inode->i_size);
 		hpfs_truncate(inode);
 	}
+
+	hpfs_unlock(inode->i_sb);
 }
 
 static int hpfs_write_begin(struct file *file, struct address_space *mapping,
-- 
1.8.1.2

[PATCH 50/93] powerpc/eeh: Don't check RTAS token to get PE addr

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gavin Shan <shangw@linux.vnet.ibm.com>

commit b8b3de224f194005ad87ede6fd022fcc2bef3b1a upstream.

RTAS token "ibm,get-config-addr-info" or ibm,get-config-addr-info2"
are used to retrieve the PE address according to PCI address, which
made up of domain/bus/slot/function. If we don't have those 2 tokens,
the domain/bus/slot/function would be used as the address for EEH
RTAS operations. Some older f/w might not have those 2 tokens and
that blocks the EEH functionality to be initialized. It was introduced
by commit e2af155c ("powerpc/eeh: pseries platform EEH initialization").

The patch skips the check on those 2 tokens so we can bring up EEH
functionality successfully. And domain/bus/slot/function will be
used as address for EEH RTAS operations.

Reported-by: Robert Knight <knight@princeton.edu>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Tested-by: Robert Knight <knight@princeton.edu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/powerpc/platforms/pseries/eeh_pseries.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 8752f79..8a811d9 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -83,7 +83,11 @@ static int pseries_eeh_init(void)
 	ibm_configure_pe		= rtas_token("ibm,configure-pe");
 	ibm_configure_bridge		= rtas_token ("ibm,configure-bridge");
 
-	/* necessary sanity check */
+	/*
+	 * Necessary sanity check. We needn't check "get-config-addr-info"
+	 * and its variant since the old firmware probably support address
+	 * of domain/bus/slot/function for EEH RTAS operations.
+	 */
 	if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) {
 		pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n",
 			__func__);
@@ -102,12 +106,6 @@ static int pseries_eeh_init(void)
 		pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n",
 			__func__);
 		return -EINVAL;
-	} else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE &&
-		   ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) {
-		pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and "
-			"<ibm,get-config-addr-info> invalid\n",
-			__func__);
-		return -EINVAL;
 	} else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE &&
 		   ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) {
 		pr_warning("%s: RTAS service <ibm,configure-pe> and "
-- 
1.8.1.2

[PATCH 51/93] drm/gma500: Increase max resolution for mode setting

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

commit cbbd379aa43890f36da934f5af619d2fb8ec3d87 upstream.

By having a higher max resolution we can now set up a virtual
framebuffer that spans several monitors. 4096 should be ok since we're
gen 3 or higher and should be enough for most dual head setups.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/gma500/framebuffer.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 5732b57..71a4b61 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -793,8 +793,8 @@ void psb_modeset_init(struct drm_device *dev)
 	for (i = 0; i < dev_priv->num_pipe; i++)
 		psb_intel_crtc_init(dev, i, mode_dev);
 
-	dev->mode_config.max_width = 2048;
-	dev->mode_config.max_height = 2048;
+	dev->mode_config.max_width = 4096;
+	dev->mode_config.max_height = 4096;
 
 	psb_setup_outputs(dev);
 
-- 
1.8.1.2

[PATCH 52/93] USB: ftdi_sio: Quiet sparse noise about using plain integer was NULL pointer

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ying Xue <ying.xue@windriver.com>

commit a816e3113b63753c330ca4751ea1d208e93e3015 upstream.

Pointers should not be compared to plain integers.
Quiets the sparse warning:
warning: Using plain integer as NULL pointer

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/ftdi_sio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 45e80a7..3dbec15 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2137,7 +2137,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
 	cflag = termios->c_cflag;
 
-	if (old_termios == 0)
+	if (!old_termios)
 		goto no_skip;
 
 	if (old_termios->c_cflag == termios->c_cflag
-- 
1.8.1.2

[PATCH 53/93] tg3: Add New 5719 Read DMA workaround

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Chan <mchan@broadcom.com>

commit 091f0ea30074bc43f9250961b3247af713024bc6 upstream.

After Power-on-reset, the 5719's TX DMA length registers may contain
uninitialized values and cause TX DMA to stall.  Check for invalid
values and set a register bit to flush the TX channels.  The bit
needs to be turned off after the DMA channels have been flushed.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/ethernet/broadcom/tg3.c | 23 +++++++++++++++++++++++
 drivers/net/ethernet/broadcom/tg3.h |  7 ++++++-
 2 files changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 99d4d07..8f2b8aa 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -9208,6 +9208,19 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	tw32_f(RDMAC_MODE, rdmac_mode);
 	udelay(40);
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+		for (i = 0; i < TG3_NUM_RDMA_CHANNELS; i++) {
+			if (tr32(TG3_RDMA_LENGTH + (i << 2)) > TG3_MAX_MTU(tp))
+				break;
+		}
+		if (i < TG3_NUM_RDMA_CHANNELS) {
+			val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
+			val |= TG3_LSO_RD_DMA_TX_LENGTH_WA;
+			tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val);
+			tg3_flag_set(tp, 5719_RDMA_BUG);
+		}
+	}
+
 	tw32(RCVDCC_MODE, RCVDCC_MODE_ENABLE | RCVDCC_MODE_ATTN_ENABLE);
 	if (!tg3_flag(tp, 5705_PLUS))
 		tw32(MBFREE_MODE, MBFREE_MODE_ENABLE);
@@ -9463,6 +9476,16 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp)
 	TG3_STAT_ADD32(&sp->tx_ucast_packets, MAC_TX_STATS_UCAST);
 	TG3_STAT_ADD32(&sp->tx_mcast_packets, MAC_TX_STATS_MCAST);
 	TG3_STAT_ADD32(&sp->tx_bcast_packets, MAC_TX_STATS_BCAST);
+	if (unlikely(tg3_flag(tp, 5719_RDMA_BUG) &&
+		     (sp->tx_ucast_packets.low + sp->tx_mcast_packets.low +
+		      sp->tx_bcast_packets.low) > TG3_NUM_RDMA_CHANNELS)) {
+		u32 val;
+
+		val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
+		val &= ~TG3_LSO_RD_DMA_TX_LENGTH_WA;
+		tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val);
+		tg3_flag_clear(tp, 5719_RDMA_BUG);
+	}
 
 	TG3_STAT_ADD32(&sp->rx_octets, MAC_RX_STATS_OCTETS);
 	TG3_STAT_ADD32(&sp->rx_fragments, MAC_RX_STATS_FRAGMENTS);
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index 93865f8..024c9c9 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -1376,7 +1376,11 @@
 #define TG3_LSO_RD_DMA_CRPTEN_CTRL	0x00004910
 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K	 0x00030000
 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K	 0x000c0000
-/* 0x4914 --> 0x4c00 unused */
+#define TG3_LSO_RD_DMA_TX_LENGTH_WA	 0x02000000
+/* 0x4914 --> 0x4be0 unused */
+
+#define TG3_NUM_RDMA_CHANNELS		4
+#define TG3_RDMA_LENGTH			0x00004be0
 
 /* Write DMA control registers */
 #define WDMAC_MODE			0x00004c00
@@ -2920,6 +2924,7 @@ enum TG3_FLAGS {
 	TG3_FLAG_L1PLLPD_EN,
 	TG3_FLAG_APE_HAS_NCSI,
 	TG3_FLAG_4K_FIFO_LIMIT,
+	TG3_FLAG_5719_RDMA_BUG,
 	TG3_FLAG_RESET_TASK_PENDING,
 	TG3_FLAG_5705_PLUS,
 	TG3_FLAG_IS_5788,
-- 
1.8.1.2

[PATCH 54/93] tg3: Add read dma workaround for 5720

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nithin Sujir <nsujir@broadcom.com>

commit 9bc297ea0622bb2a6b3abfa2fa84f0a3b86ef8c8 upstream.

Commit 091f0ea30074bc43f9250961b3247af713024bc6 "tg3: Add New 5719 Read
DMA workaround" added a workaround for TX DMA stall on the 5719. This
workaround needs to be applied to the 5720 as well.

Reported-by: Roland Dreier <roland@purestorage.com>
Tested-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ luis: backport to 3.5:
  - use GET_ASIC_REV() macro instead of tg3_asic_rev() ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/ethernet/broadcom/tg3.c | 21 +++++++++++++++------
 drivers/net/ethernet/broadcom/tg3.h |  5 +++--
 2 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 8f2b8aa..4cb0916 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -8572,6 +8572,14 @@ static void tg3_rss_write_indir_tbl(struct tg3 *tp)
 	}
 }
 
+static inline u32 tg3_lso_rd_dma_workaround_bit(struct tg3 *tp)
+{
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+		return TG3_LSO_RD_DMA_TX_LENGTH_WA_5719;
+	else
+		return TG3_LSO_RD_DMA_TX_LENGTH_WA_5720;
+}
+
 /* tp->lock is held. */
 static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 {
@@ -9208,16 +9216,17 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	tw32_f(RDMAC_MODE, rdmac_mode);
 	udelay(40);
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
 		for (i = 0; i < TG3_NUM_RDMA_CHANNELS; i++) {
 			if (tr32(TG3_RDMA_LENGTH + (i << 2)) > TG3_MAX_MTU(tp))
 				break;
 		}
 		if (i < TG3_NUM_RDMA_CHANNELS) {
 			val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
-			val |= TG3_LSO_RD_DMA_TX_LENGTH_WA;
+			val |= tg3_lso_rd_dma_workaround_bit(tp);
 			tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val);
-			tg3_flag_set(tp, 5719_RDMA_BUG);
+			tg3_flag_set(tp, 5719_5720_RDMA_BUG);
 		}
 	}
 
@@ -9476,15 +9485,15 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp)
 	TG3_STAT_ADD32(&sp->tx_ucast_packets, MAC_TX_STATS_UCAST);
 	TG3_STAT_ADD32(&sp->tx_mcast_packets, MAC_TX_STATS_MCAST);
 	TG3_STAT_ADD32(&sp->tx_bcast_packets, MAC_TX_STATS_BCAST);
-	if (unlikely(tg3_flag(tp, 5719_RDMA_BUG) &&
+	if (unlikely(tg3_flag(tp, 5719_5720_RDMA_BUG) &&
 		     (sp->tx_ucast_packets.low + sp->tx_mcast_packets.low +
 		      sp->tx_bcast_packets.low) > TG3_NUM_RDMA_CHANNELS)) {
 		u32 val;
 
 		val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL);
-		val &= ~TG3_LSO_RD_DMA_TX_LENGTH_WA;
+		val &= ~tg3_lso_rd_dma_workaround_bit(tp);
 		tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val);
-		tg3_flag_clear(tp, 5719_RDMA_BUG);
+		tg3_flag_clear(tp, 5719_5720_RDMA_BUG);
 	}
 
 	TG3_STAT_ADD32(&sp->rx_octets, MAC_RX_STATS_OCTETS);
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index 024c9c9..622bbaf 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -1376,7 +1376,8 @@
 #define TG3_LSO_RD_DMA_CRPTEN_CTRL	0x00004910
 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K	 0x00030000
 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K	 0x000c0000
-#define TG3_LSO_RD_DMA_TX_LENGTH_WA	 0x02000000
+#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5719	 0x02000000
+#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5720	 0x00200000
 /* 0x4914 --> 0x4be0 unused */
 
 #define TG3_NUM_RDMA_CHANNELS		4
@@ -2924,7 +2925,7 @@ enum TG3_FLAGS {
 	TG3_FLAG_L1PLLPD_EN,
 	TG3_FLAG_APE_HAS_NCSI,
 	TG3_FLAG_4K_FIFO_LIMIT,
-	TG3_FLAG_5719_RDMA_BUG,
+	TG3_FLAG_5719_5720_RDMA_BUG,
 	TG3_FLAG_RESET_TASK_PENDING,
 	TG3_FLAG_5705_PLUS,
 	TG3_FLAG_IS_5788,
-- 
1.8.1.2

[PATCH 55/93] libceph: clear messenger auth_retry flag when we authenticate

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sage Weil <sage@inktank.com>

commit 20e55c4cc758e4dccdfd92ae8e9588dd624b2cd7 upstream.

We maintain a counter of failed auth attempts to allow us to retry once
before failing.  However, if the second attempt succeeds, the flag isn't
cleared, which makes us think auth failed again later when the connection
resets for other reasons (like a socket error).

This is one part of the sorry sequence of events in bug

	http://tracker.ceph.com/issues/4282

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 net/ceph/messenger.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 692243a..559690f 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -1548,7 +1548,6 @@ static int process_connect(struct ceph_connection *con)
 			con->error_msg = "connect authorization failure";
 			return -1;
 		}
-		con->auth_retry = 1;
 		con_out_kvec_reset(con);
 		ret = prepare_write_connect(con);
 		if (ret < 0)
@@ -1633,7 +1632,7 @@ static int process_connect(struct ceph_connection *con)
 
 		BUG_ON(con->state != CON_STATE_NEGOTIATING);
 		con->state = CON_STATE_OPEN;
-
+		con->auth_retry = 0;    /* we authenticated; clear flag */
 		con->peer_global_seq = le32_to_cpu(con->in_reply.global_seq);
 		con->connect_seq++;
 		con->peer_features = server_feat;
-- 
1.8.1.2

[PATCH 56/93] libceph: fix authorizer invalidation

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sage Weil <sage@inktank.com>

commit 4b8e8b5d78b8322351d44487c1b76f7e9d3412bc upstream.

We were invalidating the authorizer by removing the ticket handler
entirely.  This was effective in inducing us to request a new authorizer,
but in the meantime it mean that any authorizer we generated would get a
new and initialized handler with secret_id=0, which would always be
rejected by the server side with a confusing error message:

 auth: could not find secret_id=0
 cephx: verify_authorizer could not get service secret for service osd secret_id=0

Instead, simply clear the validity field.  This will still induce the auth
code to request a new secret, but will let us continue to use the old
ticket in the meantime.  The messenger code will probably continue to fail,
but the exponential backoff will kick in, and eventually the we will get a
new (hopefully more valid) ticket from the mon and be able to continue.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 net/ceph/auth_x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index a16bf14..bd8758d 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -630,7 +630,7 @@ static void ceph_x_invalidate_authorizer(struct ceph_auth_client *ac,
 
 	th = get_ticket_handler(ac, peer_type);
 	if (!IS_ERR(th))
-		remove_ticket_handler(ac, th);
+		memset(&th->validity, 0, sizeof(th->validity));
 }
 
 
-- 
1.8.1.2

[PATCH 57/93] libceph: add update_authorizer auth method

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sage Weil <sage@inktank.com>

commit 0bed9b5c523d577378b6f83eab5835fe30c27208 upstream.

Currently the messenger calls out to a get_authorizer con op, which will
create a new authorizer if it doesn't yet have one.  In the meantime, when
we rotate our service keys, the authorizer doesn't get updated.  Eventually
it will be rejected by the server on a new connection attempt and get
invalidated, and we will then rebuild a new authorizer, but this is not
ideal.

Instead, if we do have an authorizer, call a new update_authorizer op that
will verify that the current authorizer is using the latest secret.  If it
is not, we will build a new one that does.  This avoids the transient
failure.

This fixes one of the sorry sequence of events for bug

	http://tracker.ceph.com/issues/4282

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/ceph/mds_client.c      |  7 ++++++-
 include/linux/ceph/auth.h |  3 +++
 net/ceph/auth_x.c         | 23 +++++++++++++++++++++++
 net/ceph/auth_x.h         |  1 +
 net/ceph/osd_client.c     |  5 +++++
 5 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 7f1682d..38042cb 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -3414,7 +3414,12 @@ static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con,
 	}
 	if (!auth->authorizer && ac->ops && ac->ops->create_authorizer) {
 		int ret = ac->ops->create_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
-							auth);
+						     auth);
+		if (ret)
+			return ERR_PTR(ret);
+	} else if (ac->ops && ac->ops_update_authorizer) {
+		int ret = ac->ops->update_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
+						     auth);
 		if (ret)
 			return ERR_PTR(ret);
 	}
diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h
index d4080f3..73e973e 100644
--- a/include/linux/ceph/auth.h
+++ b/include/linux/ceph/auth.h
@@ -52,6 +52,9 @@ struct ceph_auth_client_ops {
 	 */
 	int (*create_authorizer)(struct ceph_auth_client *ac, int peer_type,
 				 struct ceph_auth_handshake *auth);
+	/* ensure that an existing authorizer is up to date */
+	int (*update_authorizer)(struct ceph_auth_client *ac, int peer_type,
+				 struct ceph_auth_handshake *auth);
 	int (*verify_authorizer_reply)(struct ceph_auth_client *ac,
 				       struct ceph_authorizer *a, size_t len);
 	void (*destroy_authorizer)(struct ceph_auth_client *ac,
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index bd8758d..2d59815 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -298,6 +298,7 @@ static int ceph_x_build_authorizer(struct ceph_auth_client *ac,
 			return -ENOMEM;
 	}
 	au->service = th->service;
+	au->secret_id = th->secret_id;
 
 	msg_a = au->buf->vec.iov_base;
 	msg_a->struct_v = 1;
@@ -555,6 +556,27 @@ static int ceph_x_create_authorizer(
 	return 0;
 }
 
+static int ceph_x_update_authorizer(
+	struct ceph_auth_client *ac, int peer_type,
+	struct ceph_auth_handshake *auth)
+{
+	struct ceph_x_authorizer *au;
+	struct ceph_x_ticket_handler *th;
+	int ret;
+
+	th = get_ticket_handler(ac, peer_type);
+	if (IS_ERR(th))
+		return PTR_ERR(th);
+
+	au = (struct ceph_x_authorizer *)auth->authorizer;
+	if (au->secret_id < th->secret_id) {
+		dout("ceph_x_update_authorizer service %u secret %llu < %llu\n",
+		     au->service, au->secret_id, th->secret_id);
+		return ceph_x_build_authorizer(ac, th, au);
+	}
+	return 0;
+}
+
 static int ceph_x_verify_authorizer_reply(struct ceph_auth_client *ac,
 					  struct ceph_authorizer *a, size_t len)
 {
@@ -641,6 +663,7 @@ static const struct ceph_auth_client_ops ceph_x_ops = {
 	.build_request = ceph_x_build_request,
 	.handle_reply = ceph_x_handle_reply,
 	.create_authorizer = ceph_x_create_authorizer,
+	.update_authorizer = ceph_x_update_authorizer,
 	.verify_authorizer_reply = ceph_x_verify_authorizer_reply,
 	.destroy_authorizer = ceph_x_destroy_authorizer,
 	.invalidate_authorizer = ceph_x_invalidate_authorizer,
diff --git a/net/ceph/auth_x.h b/net/ceph/auth_x.h
index f459e93..c5a058d 100644
--- a/net/ceph/auth_x.h
+++ b/net/ceph/auth_x.h
@@ -29,6 +29,7 @@ struct ceph_x_authorizer {
 	struct ceph_buffer *buf;
 	unsigned int service;
 	u64 nonce;
+	u64 secret_id;
 	char reply_buf[128];  /* big enough for encrypted blob */
 };
 
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 065cc38..d514d45 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -2160,6 +2160,11 @@ static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con,
 							auth);
 		if (ret)
 			return ERR_PTR(ret);
+	} else if (ac->ops && ac->ops->update_authorizer) {
+		int ret = ac->ops->update_authorizer(ac, CEPH_ENTITY_TYPE_OSD,
+						     auth);
+		if (ret)
+			return ERR_PTR(ret);
 	}
 	*proto = ac->protocol;
 
-- 
1.8.1.2

[PATCH 58/93] libceph: wrap auth ops in wrapper functions

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sage Weil <sage@inktank.com>

commit 27859f9773e4a0b2042435b13400ee2c891a61f4 upstream.

Use wrapper functions that check whether the auth op exists so that callers
do not need a bunch of conditional checks.  Simplifies the external
interface.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/ceph/mds_client.c      | 26 ++++++++++++--------------
 include/linux/ceph/auth.h | 13 +++++++++++++
 net/ceph/auth.c           | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 net/ceph/auth_x.c         |  1 -
 net/ceph/mon_client.c     |  7 +++----
 net/ceph/osd_client.c     | 26 +++++++++-----------------
 6 files changed, 84 insertions(+), 36 deletions(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 38042cb..7111bc9 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -335,9 +335,9 @@ void ceph_put_mds_session(struct ceph_mds_session *s)
 	     atomic_read(&s->s_ref), atomic_read(&s->s_ref)-1);
 	if (atomic_dec_and_test(&s->s_ref)) {
 		if (s->s_auth.authorizer)
-		     s->s_mdsc->fsc->client->monc.auth->ops->destroy_authorizer(
-			     s->s_mdsc->fsc->client->monc.auth,
-			     s->s_auth.authorizer);
+			ceph_auth_destroy_authorizer(
+				s->s_mdsc->fsc->client->monc.auth,
+				s->s_auth.authorizer);
 		kfree(s);
 	}
 }
@@ -3408,18 +3408,17 @@ static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con,
 	struct ceph_auth_handshake *auth = &s->s_auth;
 
 	if (force_new && auth->authorizer) {
-		if (ac->ops && ac->ops->destroy_authorizer)
-			ac->ops->destroy_authorizer(ac, auth->authorizer);
+		ceph_auth_destroy_authorizer(ac, auth->authorizer);
 		auth->authorizer = NULL;
 	}
-	if (!auth->authorizer && ac->ops && ac->ops->create_authorizer) {
-		int ret = ac->ops->create_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
-						     auth);
+	if (!auth->authorizer) {
+		int ret = ceph_auth_create_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
+						      auth);
 		if (ret)
 			return ERR_PTR(ret);
-	} else if (ac->ops && ac->ops_update_authorizer) {
-		int ret = ac->ops->update_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
-						     auth);
+	} else {
+		int ret = ceph_auth_update_authorizer(ac, CEPH_ENTITY_TYPE_MDS,
+						      auth);
 		if (ret)
 			return ERR_PTR(ret);
 	}
@@ -3435,7 +3434,7 @@ static int verify_authorizer_reply(struct ceph_connection *con, int len)
 	struct ceph_mds_client *mdsc = s->s_mdsc;
 	struct ceph_auth_client *ac = mdsc->fsc->client->monc.auth;
 
-	return ac->ops->verify_authorizer_reply(ac, s->s_auth.authorizer, len);
+	return ceph_auth_verify_authorizer_reply(ac, s->s_auth.authorizer, len);
 }
 
 static int invalidate_authorizer(struct ceph_connection *con)
@@ -3444,8 +3443,7 @@ static int invalidate_authorizer(struct ceph_connection *con)
 	struct ceph_mds_client *mdsc = s->s_mdsc;
 	struct ceph_auth_client *ac = mdsc->fsc->client->monc.auth;
 
-	if (ac->ops->invalidate_authorizer)
-		ac->ops->invalidate_authorizer(ac, CEPH_ENTITY_TYPE_MDS);
+	ceph_auth_invalidate_authorizer(ac, CEPH_ENTITY_TYPE_MDS);
 
 	return ceph_monc_validate_auth(&mdsc->fsc->client->monc);
 }
diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h
index 73e973e..c9c3b3a 100644
--- a/include/linux/ceph/auth.h
+++ b/include/linux/ceph/auth.h
@@ -97,5 +97,18 @@ extern int ceph_build_auth(struct ceph_auth_client *ac,
 		    void *msg_buf, size_t msg_len);
 
 extern int ceph_auth_is_authenticated(struct ceph_auth_client *ac);
+extern int ceph_auth_create_authorizer(struct ceph_auth_client *ac,
+				       int peer_type,
+				       struct ceph_auth_handshake *auth);
+extern void ceph_auth_destroy_authorizer(struct ceph_auth_client *ac,
+					 struct ceph_authorizer *a);
+extern int ceph_auth_update_authorizer(struct ceph_auth_client *ac,
+				       int peer_type,
+				       struct ceph_auth_handshake *a);
+extern int ceph_auth_verify_authorizer_reply(struct ceph_auth_client *ac,
+					     struct ceph_authorizer *a,
+					     size_t len);
+extern void ceph_auth_invalidate_authorizer(struct ceph_auth_client *ac,
+					    int peer_type);
 
 #endif
diff --git a/net/ceph/auth.c b/net/ceph/auth.c
index b4bf4ac..a22de54 100644
--- a/net/ceph/auth.c
+++ b/net/ceph/auth.c
@@ -257,3 +257,50 @@ int ceph_auth_is_authenticated(struct ceph_auth_client *ac)
 		return 0;
 	return ac->ops->is_authenticated(ac);
 }
+EXPORT_SYMBOL(ceph_auth_is_authenticated);
+
+int ceph_auth_create_authorizer(struct ceph_auth_client *ac,
+				int peer_type,
+				struct ceph_auth_handshake *auth)
+{
+	if (ac->ops && ac->ops->create_authorizer)
+		return ac->ops->create_authorizer(ac, peer_type, auth);
+	return 0;
+}
+EXPORT_SYMBOL(ceph_auth_create_authorizer);
+
+void ceph_auth_destroy_authorizer(struct ceph_auth_client *ac,
+				  struct ceph_authorizer *a)
+{
+	if (ac->ops && ac->ops->destroy_authorizer)
+		ac->ops->destroy_authorizer(ac, a);
+}
+EXPORT_SYMBOL(ceph_auth_destroy_authorizer);
+
+int ceph_auth_update_authorizer(struct ceph_auth_client *ac,
+				int peer_type,
+				struct ceph_auth_handshake *a)
+{
+	int ret = 0;
+
+	if (ac->ops && ac->ops->update_authorizer)
+		ret = ac->ops->update_authorizer(ac, peer_type, a);
+	return ret;
+}
+EXPORT_SYMBOL(ceph_auth_update_authorizer);
+
+int ceph_auth_verify_authorizer_reply(struct ceph_auth_client *ac,
+				      struct ceph_authorizer *a, size_t len)
+{
+	if (ac->ops && ac->ops->verify_authorizer_reply)
+		return ac->ops->verify_authorizer_reply(ac, a, len);
+	return 0;
+}
+EXPORT_SYMBOL(ceph_auth_verify_authorizer_reply);
+
+void ceph_auth_invalidate_authorizer(struct ceph_auth_client *ac, int peer_type)
+{
+	if (ac->ops && ac->ops->invalidate_authorizer)
+		ac->ops->invalidate_authorizer(ac, peer_type);
+}
+EXPORT_SYMBOL(ceph_auth_invalidate_authorizer);
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index 2d59815..96238ba 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -562,7 +562,6 @@ static int ceph_x_update_authorizer(
 {
 	struct ceph_x_authorizer *au;
 	struct ceph_x_ticket_handler *th;
-	int ret;
 
 	th = get_ticket_handler(ac, peer_type);
 	if (IS_ERR(th))
diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c
index 900ea0f..8a9235d 100644
--- a/net/ceph/mon_client.c
+++ b/net/ceph/mon_client.c
@@ -737,7 +737,7 @@ static void delayed_work(struct work_struct *work)
 
 		__validate_auth(monc);
 
-		if (monc->auth->ops->is_authenticated(monc->auth))
+		if (ceph_auth_is_authenticated(monc->auth))
 			__send_subscribe(monc);
 	}
 	__schedule_delayed(monc);
@@ -893,8 +893,7 @@ static void handle_auth_reply(struct ceph_mon_client *monc,
 
 	mutex_lock(&monc->mutex);
 	had_debugfs_info = have_debugfs_info(monc);
-	if (monc->auth->ops)
-		was_auth = monc->auth->ops->is_authenticated(monc->auth);
+	was_auth = ceph_auth_is_authenticated(monc->auth);
 	monc->pending_auth = 0;
 	ret = ceph_handle_auth_reply(monc->auth, msg->front.iov_base,
 				     msg->front.iov_len,
@@ -905,7 +904,7 @@ static void handle_auth_reply(struct ceph_mon_client *monc,
 		wake_up_all(&monc->client->auth_wq);
 	} else if (ret > 0) {
 		__send_prepared_auth_request(monc, ret);
-	} else if (!was_auth && monc->auth->ops->is_authenticated(monc->auth)) {
+	} else if (!was_auth && ceph_auth_is_authenticated(monc->auth)) {
 		dout("authenticated, starting session\n");
 
 		monc->client->msgr.inst.name.type = CEPH_ENTITY_TYPE_CLIENT;
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index d514d45..79592c4 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -672,8 +672,7 @@ static void put_osd(struct ceph_osd *osd)
 	if (atomic_dec_and_test(&osd->o_ref) && osd->o_auth.authorizer) {
 		struct ceph_auth_client *ac = osd->o_osdc->client->monc.auth;
 
-		if (ac->ops && ac->ops->destroy_authorizer)
-			ac->ops->destroy_authorizer(ac, osd->o_auth.authorizer);
+		ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer);
 		kfree(osd);
 	}
 }
@@ -2151,17 +2150,16 @@ static struct ceph_auth_handshake *get_authorizer(struct ceph_connection *con,
 	struct ceph_auth_handshake *auth = &o->o_auth;
 
 	if (force_new && auth->authorizer) {
-		if (ac->ops && ac->ops->destroy_authorizer)
-			ac->ops->destroy_authorizer(ac, auth->authorizer);
+		ceph_auth_destroy_authorizer(ac, auth->authorizer);
 		auth->authorizer = NULL;
 	}
-	if (!auth->authorizer && ac->ops && ac->ops->create_authorizer) {
-		int ret = ac->ops->create_authorizer(ac, CEPH_ENTITY_TYPE_OSD,
-							auth);
+	if (!auth->authorizer) {
+		int ret = ceph_auth_create_authorizer(ac, CEPH_ENTITY_TYPE_OSD,
+						      auth);
 		if (ret)
 			return ERR_PTR(ret);
-	} else if (ac->ops && ac->ops->update_authorizer) {
-		int ret = ac->ops->update_authorizer(ac, CEPH_ENTITY_TYPE_OSD,
+	} else {
+		int ret = ceph_auth_update_authorizer(ac, CEPH_ENTITY_TYPE_OSD,
 						     auth);
 		if (ret)
 			return ERR_PTR(ret);
@@ -2178,11 +2176,7 @@ static int verify_authorizer_reply(struct ceph_connection *con, int len)
 	struct ceph_osd_client *osdc = o->o_osdc;
 	struct ceph_auth_client *ac = osdc->client->monc.auth;
 
-	/*
-	 * XXX If ac->ops or ac->ops->verify_authorizer_reply is null,
-	 * XXX which do we do:  succeed or fail?
-	 */
-	return ac->ops->verify_authorizer_reply(ac, o->o_auth.authorizer, len);
+	return ceph_auth_verify_authorizer_reply(ac, o->o_auth.authorizer, len);
 }
 
 static int invalidate_authorizer(struct ceph_connection *con)
@@ -2191,9 +2185,7 @@ static int invalidate_authorizer(struct ceph_connection *con)
 	struct ceph_osd_client *osdc = o->o_osdc;
 	struct ceph_auth_client *ac = osdc->client->monc.auth;
 
-	if (ac->ops && ac->ops->invalidate_authorizer)
-		ac->ops->invalidate_authorizer(ac, CEPH_ENTITY_TYPE_OSD);
-
+	ceph_auth_invalidate_authorizer(ac, CEPH_ENTITY_TYPE_OSD);
 	return ceph_monc_validate_auth(&osdc->client->monc);
 }
 
-- 
1.8.1.2

[PATCH 59/93] libceph: wrap auth methods in a mutex

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sage Weil <sage@inktank.com>

commit e9966076cdd952e19f2dd4854cd719be0d7cbebc upstream.

The auth code is called from a variety of contexts, include the mon_client
(protected by the monc's mutex) and the messenger callbacks (currently
protected by nothing).  Avoid chaos by protecting all auth state with a
mutex.  Nothing is blocking, so this should be simple and lightweight.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 include/linux/ceph/auth.h |  2 ++
 net/ceph/auth.c           | 78 ++++++++++++++++++++++++++++++++++-------------
 2 files changed, 58 insertions(+), 22 deletions(-)

diff --git a/include/linux/ceph/auth.h b/include/linux/ceph/auth.h
index c9c3b3a..5f33868 100644
--- a/include/linux/ceph/auth.h
+++ b/include/linux/ceph/auth.h
@@ -78,6 +78,8 @@ struct ceph_auth_client {
 	u64 global_id;          /* our unique id in system */
 	const struct ceph_crypto_key *key;     /* our secret key */
 	unsigned want_keys;     /* which services we want */
+
+	struct mutex mutex;
 };
 
 extern struct ceph_auth_client *ceph_auth_init(const char *name,
diff --git a/net/ceph/auth.c b/net/ceph/auth.c
index a22de54..6b923bc 100644
--- a/net/ceph/auth.c
+++ b/net/ceph/auth.c
@@ -47,6 +47,7 @@ struct ceph_auth_client *ceph_auth_init(const char *name, const struct ceph_cryp
 	if (!ac)
 		goto out;
 
+	mutex_init(&ac->mutex);
 	ac->negotiating = true;
 	if (name)
 		ac->name = name;
@@ -73,10 +74,12 @@ void ceph_auth_destroy(struct ceph_auth_client *ac)
  */
 void ceph_auth_reset(struct ceph_auth_client *ac)
 {
+	mutex_lock(&ac->mutex);
 	dout("auth_reset %p\n", ac);
 	if (ac->ops && !ac->negotiating)
 		ac->ops->reset(ac);
 	ac->negotiating = true;
+	mutex_unlock(&ac->mutex);
 }
 
 int ceph_entity_name_encode(const char *name, void **p, void *end)
@@ -102,6 +105,7 @@ int ceph_auth_build_hello(struct ceph_auth_client *ac, void *buf, size_t len)
 	int i, num;
 	int ret;
 
+	mutex_lock(&ac->mutex);
 	dout("auth_build_hello\n");
 	monhdr->have_version = 0;
 	monhdr->session_mon = cpu_to_le16(-1);
@@ -122,15 +126,19 @@ int ceph_auth_build_hello(struct ceph_auth_client *ac, void *buf, size_t len)
 
 	ret = ceph_entity_name_encode(ac->name, &p, end);
 	if (ret < 0)
-		return ret;
+		goto out;
 	ceph_decode_need(&p, end, sizeof(u64), bad);
 	ceph_encode_64(&p, ac->global_id);
 
 	ceph_encode_32(&lenp, p - lenp - sizeof(u32));
-	return p - buf;
+	ret = p - buf;
+out:
+	mutex_unlock(&ac->mutex);
+	return ret;
 
 bad:
-	return -ERANGE;
+	ret = -ERANGE;
+	goto out;
 }
 
 static int ceph_build_auth_request(struct ceph_auth_client *ac,
@@ -151,11 +159,13 @@ static int ceph_build_auth_request(struct ceph_auth_client *ac,
 	if (ret < 0) {
 		pr_err("error %d building auth method %s request\n", ret,
 		       ac->ops->name);
-		return ret;
+		goto out;
 	}
 	dout(" built request %d bytes\n", ret);
 	ceph_encode_32(&p, ret);
-	return p + ret - msg_buf;
+	ret = p + ret - msg_buf;
+out:
+	return ret;
 }
 
 /*
@@ -176,6 +186,7 @@ int ceph_handle_auth_reply(struct ceph_auth_client *ac,
 	int result_msg_len;
 	int ret = -EINVAL;
 
+	mutex_lock(&ac->mutex);
 	dout("handle_auth_reply %p %p\n", p, end);
 	ceph_decode_need(&p, end, sizeof(u32) * 3 + sizeof(u64), bad);
 	protocol = ceph_decode_32(&p);
@@ -227,35 +238,44 @@ int ceph_handle_auth_reply(struct ceph_auth_client *ac,
 
 	ret = ac->ops->handle_reply(ac, result, payload, payload_end);
 	if (ret == -EAGAIN) {
-		return ceph_build_auth_request(ac, reply_buf, reply_len);
+		ret = ceph_build_auth_request(ac, reply_buf, reply_len);
 	} else if (ret) {
 		pr_err("auth method '%s' error %d\n", ac->ops->name, ret);
-		return ret;
 	}
-	return 0;
 
-bad:
-	pr_err("failed to decode auth msg\n");
 out:
+	mutex_unlock(&ac->mutex);
 	return ret;
+
+bad:
+	pr_err("failed to decode auth msg\n");
+	ret = -EINVAL;
+	goto out;
 }
 
 int ceph_build_auth(struct ceph_auth_client *ac,
 		    void *msg_buf, size_t msg_len)
 {
+	int ret = 0;
+
+	mutex_lock(&ac->mutex);
 	if (!ac->protocol)
-		return ceph_auth_build_hello(ac, msg_buf, msg_len);
-	BUG_ON(!ac->ops);
-	if (ac->ops->should_authenticate(ac))
-		return ceph_build_auth_request(ac, msg_buf, msg_len);
-	return 0;
+		ret = ceph_auth_build_hello(ac, msg_buf, msg_len);
+	else if (ac->ops->should_authenticate(ac))
+		ret = ceph_build_auth_request(ac, msg_buf, msg_len);
+	mutex_unlock(&ac->mutex);
+	return ret;
 }
 
 int ceph_auth_is_authenticated(struct ceph_auth_client *ac)
 {
-	if (!ac->ops)
-		return 0;
-	return ac->ops->is_authenticated(ac);
+	int ret = 0;
+
+	mutex_lock(&ac->mutex);
+	if (ac->ops)
+		ret = ac->ops->is_authenticated(ac);
+	mutex_unlock(&ac->mutex);
+	return ret;
 }
 EXPORT_SYMBOL(ceph_auth_is_authenticated);
 
@@ -263,17 +283,23 @@ int ceph_auth_create_authorizer(struct ceph_auth_client *ac,
 				int peer_type,
 				struct ceph_auth_handshake *auth)
 {
+	int ret = 0;
+
+	mutex_lock(&ac->mutex);
 	if (ac->ops && ac->ops->create_authorizer)
-		return ac->ops->create_authorizer(ac, peer_type, auth);
-	return 0;
+		ret = ac->ops->create_authorizer(ac, peer_type, auth);
+	mutex_unlock(&ac->mutex);
+	return ret;
 }
 EXPORT_SYMBOL(ceph_auth_create_authorizer);
 
 void ceph_auth_destroy_authorizer(struct ceph_auth_client *ac,
 				  struct ceph_authorizer *a)
 {
+	mutex_lock(&ac->mutex);
 	if (ac->ops && ac->ops->destroy_authorizer)
 		ac->ops->destroy_authorizer(ac, a);
+	mutex_unlock(&ac->mutex);
 }
 EXPORT_SYMBOL(ceph_auth_destroy_authorizer);
 
@@ -283,8 +309,10 @@ int ceph_auth_update_authorizer(struct ceph_auth_client *ac,
 {
 	int ret = 0;
 
+	mutex_lock(&ac->mutex);
 	if (ac->ops && ac->ops->update_authorizer)
 		ret = ac->ops->update_authorizer(ac, peer_type, a);
+	mutex_unlock(&ac->mutex);
 	return ret;
 }
 EXPORT_SYMBOL(ceph_auth_update_authorizer);
@@ -292,15 +320,21 @@ EXPORT_SYMBOL(ceph_auth_update_authorizer);
 int ceph_auth_verify_authorizer_reply(struct ceph_auth_client *ac,
 				      struct ceph_authorizer *a, size_t len)
 {
+	int ret = 0;
+
+	mutex_lock(&ac->mutex);
 	if (ac->ops && ac->ops->verify_authorizer_reply)
-		return ac->ops->verify_authorizer_reply(ac, a, len);
-	return 0;
+		ret = ac->ops->verify_authorizer_reply(ac, a, len);
+	mutex_unlock(&ac->mutex);
+	return ret;
 }
 EXPORT_SYMBOL(ceph_auth_verify_authorizer_reply);
 
 void ceph_auth_invalidate_authorizer(struct ceph_auth_client *ac, int peer_type)
 {
+	mutex_lock(&ac->mutex);
 	if (ac->ops && ac->ops->invalidate_authorizer)
 		ac->ops->invalidate_authorizer(ac, peer_type);
+	mutex_unlock(&ac->mutex);
 }
 EXPORT_SYMBOL(ceph_auth_invalidate_authorizer);
-- 
1.8.1.2

[PATCH 60/93] libceph: register request before unregister linger

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

commit c89ce05e0c5a01a256100ac6a6019f276bdd1ca6 upstream.

In kick_requests(), we need to register the request before we
unregister the linger request.  Otherwise the unregister will
reset the request's osd pointer to NULL.

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 net/ceph/osd_client.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 79592c4..60ae916 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1358,8 +1358,8 @@ static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
 
 		dout("kicking lingering %p tid %llu osd%d\n", req, req->r_tid,
 		     req->r_osd ? req->r_osd->o_osd : -1);
-		__unregister_linger_request(osdc, req);
 		__register_request(osdc, req);
+		__unregister_linger_request(osdc, req);
 	}
 	mutex_unlock(&osdc->request_mutex);
 
-- 
1.8.1.2

[PATCH 61/93] libceph: always reset osds when kicking

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

commit e6d50f67a6b1a6252a616e6e629473b5c4277218 upstream.

When ceph_osdc_handle_map() is called to process a new osd map,
kick_requests() is called to ensure all affected requests are
updated if necessary to reflect changes in the osd map.  This
happens in two cases:  whenever an incremental map update is
processed; and when a full map update (or the last one if there is
more than one) gets processed.

In the former case, the kick_requests() call is followed immediately
by a call to reset_changed_osds() to ensure any connections to osds
affected by the map change are reset.  But for full map updates
this isn't done.

Both cases should be doing this osd reset.

Rather than duplicating the reset_changed_osds() call, move it into
the end of kick_requests().

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 net/ceph/osd_client.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 60ae916..8e43722 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1300,7 +1300,7 @@ static void reset_changed_osds(struct ceph_osd_client *osdc)
  * Requeue requests whose mapping to an OSD has changed.  If requests map to
  * no osd, request a new map.
  *
- * Caller should hold map_sem for read and request_mutex.
+ * Caller should hold map_sem for read.
  */
 static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
 {
@@ -1367,6 +1367,7 @@ static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
 		dout("%d requests for down osds, need new map\n", needmap);
 		ceph_monc_request_next_osdmap(&osdc->client->monc);
 	}
+	reset_changed_osds(osdc);
 }
 
 
@@ -1423,7 +1424,6 @@ void ceph_osdc_handle_map(struct ceph_osd_client *osdc, struct ceph_msg *msg)
 				osdc->osdmap = newmap;
 			}
 			kick_requests(osdc, 0);
-			reset_changed_osds(osdc);
 		} else {
 			dout("ignoring incremental map %u len %d\n",
 			     epoch, maplen);
-- 
1.8.1.2

[PATCH 62/93] libceph: must hold mutex for reset_changed_osds()

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Elder <elder@inktank.com>

commit 14d2f38df67fadee34625fcbd282ee22514c4846 upstream.

An osd client has a red-black tree describing its osds, and
occasionally we would get crashes due to one of these trees tree
becoming corrupt somehow.

The problem turned out to be that reset_changed_osds() was being
called without protection of the osd client request mutex.  That
function would call __reset_osd() for any osd that had changed, and
__reset_osd() would call __remove_osd() for any osd with no
outstanding requests, and finally __remove_osd() would remove the
corresponding entry from the red-black tree.  Thus, the tree was
getting modified without having any lock protection, and was
vulnerable to problems due to concurrent updates.

This appears to be the only osd tree updating path that has this
problem.  It can be fairly easily fixed by moving the call up
a few lines, to just before the request mutex gets dropped
in kick_requests().

This resolves:
    http://tracker.ceph.com/issues/5043

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 net/ceph/osd_client.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 8e43722..f181972 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -1361,13 +1361,13 @@ static void kick_requests(struct ceph_osd_client *osdc, int force_resend)
 		__register_request(osdc, req);
 		__unregister_linger_request(osdc, req);
 	}
+	reset_changed_osds(osdc);
 	mutex_unlock(&osdc->request_mutex);
 
 	if (needmap) {
 		dout("%d requests for down osds, need new map\n", needmap);
 		ceph_monc_request_next_osdmap(&osdc->client->monc);
 	}
-	reset_changed_osds(osdc);
 }
 
 
-- 
1.8.1.2

[PATCH 63/93] ceph: add cpu_to_le32() calls when encoding a reconnect capability

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Schutt <jaschut@sandia.gov>

commit c420276a532a10ef59849adc2681f45306166b89 upstream.

In his review, Alex Elder mentioned that he hadn't checked that
num_fcntl_locks and num_flock_locks were properly decoded on the
server side, from a le32 over-the-wire type to a cpu type.
I checked, and AFAICS it is done; those interested can consult
    Locker::_do_cap_update()
in src/mds/Locker.cc and src/include/encoding.h in the Ceph server
code (git://github.com/ceph/ceph).

I also checked the server side for flock_len decoding, and I believe
that also happens correctly, by virtue of having been declared
__le32 in struct ceph_mds_cap_reconnect, in src/include/ceph_fs.h.

Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/ceph/locks.c      | 7 +++++--
 fs/ceph/mds_client.c | 2 +-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c
index 80576d05..e9960c8 100644
--- a/fs/ceph/locks.c
+++ b/fs/ceph/locks.c
@@ -206,10 +206,12 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist,
 	int err = 0;
 	int seen_fcntl = 0;
 	int seen_flock = 0;
+	__le32 nlocks;
 
 	dout("encoding %d flock and %d fcntl locks", num_flock_locks,
 	     num_fcntl_locks);
-	err = ceph_pagelist_append(pagelist, &num_fcntl_locks, sizeof(u32));
+	nlocks = cpu_to_le32(num_fcntl_locks);
+	err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks));
 	if (err)
 		goto fail;
 	for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
@@ -229,7 +231,8 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist,
 			goto fail;
 	}
 
-	err = ceph_pagelist_append(pagelist, &num_flock_locks, sizeof(u32));
+	nlocks = cpu_to_le32(num_flock_locks);
+	err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks));
 	if (err)
 		goto fail;
 	for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 7111bc9..d375524 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -2457,7 +2457,7 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
 			lock_flocks();
 			ceph_count_locks(inode, &num_fcntl_locks,
 					 &num_flock_locks);
-			rec.v2.flock_len = (2*sizeof(u32) +
+			rec.v2.flock_len = cpu_to_le32(2*sizeof(u32) +
 					    (num_fcntl_locks+num_flock_locks) *
 					    sizeof(struct ceph_filelock));
 			unlock_flocks();
-- 
1.8.1.2

[PATCH 64/93] ceph: ceph_pagelist_append might sleep while atomic

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Schutt <jaschut@sandia.gov>

commit 39be95e9c8c0b5668c9f8806ffe29bf9f4bc0f40 upstream.

Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc()
while holding a lock, but it's spoiled because ceph_pagelist_addpage()
always calls kmap(), which might sleep.  Here's the result:

[13439.295457] ceph: mds0 reconnect start
[13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58
[13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1
    . . .
[13439.376225] Call Trace:
[13439.378757]  [<ffffffff81076f4c>] __might_sleep+0xfc/0x110
[13439.384353]  [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph]
[13439.391491]  [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph]
[13439.398035]  [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50
[13439.403775]  [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20
[13439.409277]  [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph]
[13439.415622]  [<ffffffff81196748>] ? igrab+0x28/0x70
[13439.420610]  [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph]
[13439.427584]  [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph]
[13439.434499]  [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph]
[13439.441646]  [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph]
[13439.448363]  [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph]
[13439.455250]  [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph]
[13439.461534]  [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph]
[13439.468432]  [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10
[13439.473934]  [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph]
[13439.480464]  [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph]
[13439.486492]  [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph]
[13439.493190]  [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph]
    . . .
[13439.587132] ceph: mds0 reconnect success
[13490.720032] ceph: mds0 caps stale
[13501.235257] ceph: mds0 recovery completed
[13501.300419] ceph: mds0 caps renewed

Fix it up by encoding locks into a buffer first, and when the number
of encoded locks is stable, copy that into a ceph_pagelist.

[elder@inktank.com: abbreviated the stack info a bit.]

Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/ceph/locks.c      | 76 ++++++++++++++++++++++++++++++++--------------------
 fs/ceph/mds_client.c | 65 +++++++++++++++++++++++---------------------
 fs/ceph/super.h      |  9 +++++--
 3 files changed, 89 insertions(+), 61 deletions(-)

diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c
index e9960c8..bb5fb3d 100644
--- a/fs/ceph/locks.c
+++ b/fs/ceph/locks.c
@@ -191,29 +191,23 @@ void ceph_count_locks(struct inode *inode, int *fcntl_count, int *flock_count)
 }
 
 /**
- * Encode the flock and fcntl locks for the given inode into the pagelist.
- * Format is: #fcntl locks, sequential fcntl locks, #flock locks,
- * sequential flock locks.
- * Must be called with lock_flocks() already held.
- * If we encounter more of a specific lock type than expected,
- * we return the value 1.
+ * Encode the flock and fcntl locks for the given inode into the ceph_filelock
+ * array. Must be called with lock_flocks() already held.
+ * If we encounter more of a specific lock type than expected, return -ENOSPC.
  */
-int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist,
-		      int num_fcntl_locks, int num_flock_locks)
+int ceph_encode_locks_to_buffer(struct inode *inode,
+				struct ceph_filelock *flocks,
+				int num_fcntl_locks, int num_flock_locks)
 {
 	struct file_lock *lock;
-	struct ceph_filelock cephlock;
 	int err = 0;
 	int seen_fcntl = 0;
 	int seen_flock = 0;
-	__le32 nlocks;
+	int l = 0;
 
 	dout("encoding %d flock and %d fcntl locks", num_flock_locks,
 	     num_fcntl_locks);
-	nlocks = cpu_to_le32(num_fcntl_locks);
-	err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks));
-	if (err)
-		goto fail;
+
 	for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
 		if (lock->fl_flags & FL_POSIX) {
 			++seen_fcntl;
@@ -221,20 +215,12 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist,
 				err = -ENOSPC;
 				goto fail;
 			}
-			err = lock_to_ceph_filelock(lock, &cephlock);
+			err = lock_to_ceph_filelock(lock, &flocks[l]);
 			if (err)
 				goto fail;
-			err = ceph_pagelist_append(pagelist, &cephlock,
-					   sizeof(struct ceph_filelock));
+			++l;
 		}
-		if (err)
-			goto fail;
 	}
-
-	nlocks = cpu_to_le32(num_flock_locks);
-	err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks));
-	if (err)
-		goto fail;
 	for (lock = inode->i_flock; lock != NULL; lock = lock->fl_next) {
 		if (lock->fl_flags & FL_FLOCK) {
 			++seen_flock;
@@ -242,19 +228,51 @@ int ceph_encode_locks(struct inode *inode, struct ceph_pagelist *pagelist,
 				err = -ENOSPC;
 				goto fail;
 			}
-			err = lock_to_ceph_filelock(lock, &cephlock);
+			err = lock_to_ceph_filelock(lock, &flocks[l]);
 			if (err)
 				goto fail;
-			err = ceph_pagelist_append(pagelist, &cephlock,
-					   sizeof(struct ceph_filelock));
+			++l;
 		}
-		if (err)
-			goto fail;
 	}
 fail:
 	return err;
 }
 
+/**
+ * Copy the encoded flock and fcntl locks into the pagelist.
+ * Format is: #fcntl locks, sequential fcntl locks, #flock locks,
+ * sequential flock locks.
+ * Returns zero on success.
+ */
+int ceph_locks_to_pagelist(struct ceph_filelock *flocks,
+			   struct ceph_pagelist *pagelist,
+			   int num_fcntl_locks, int num_flock_locks)
+{
+	int err = 0;
+	__le32 nlocks;
+
+	nlocks = cpu_to_le32(num_fcntl_locks);
+	err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks));
+	if (err)
+		goto out_fail;
+
+	err = ceph_pagelist_append(pagelist, flocks,
+				   num_fcntl_locks * sizeof(*flocks));
+	if (err)
+		goto out_fail;
+
+	nlocks = cpu_to_le32(num_flock_locks);
+	err = ceph_pagelist_append(pagelist, &nlocks, sizeof(nlocks));
+	if (err)
+		goto out_fail;
+
+	err = ceph_pagelist_append(pagelist,
+				   &flocks[num_fcntl_locks],
+				   num_flock_locks * sizeof(*flocks));
+out_fail:
+	return err;
+}
+
 /*
  * Given a pointer to a lock, convert it to a ceph filelock
  */
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index d375524..0b26ea8 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -2450,39 +2450,44 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
 
 	if (recon_state->flock) {
 		int num_fcntl_locks, num_flock_locks;
-		struct ceph_pagelist_cursor trunc_point;
-
-		ceph_pagelist_set_cursor(pagelist, &trunc_point);
-		do {
-			lock_flocks();
-			ceph_count_locks(inode, &num_fcntl_locks,
-					 &num_flock_locks);
-			rec.v2.flock_len = cpu_to_le32(2*sizeof(u32) +
-					    (num_fcntl_locks+num_flock_locks) *
-					    sizeof(struct ceph_filelock));
-			unlock_flocks();
-
-			/* pre-alloc pagelist */
-			ceph_pagelist_truncate(pagelist, &trunc_point);
-			err = ceph_pagelist_append(pagelist, &rec, reclen);
-			if (!err)
-				err = ceph_pagelist_reserve(pagelist,
-							    rec.v2.flock_len);
-
-			/* encode locks */
-			if (!err) {
-				lock_flocks();
-				err = ceph_encode_locks(inode,
-							pagelist,
-							num_fcntl_locks,
-							num_flock_locks);
-				unlock_flocks();
-			}
-		} while (err == -ENOSPC);
+		struct ceph_filelock *flocks;
+
+encode_again:
+		lock_flocks();
+		ceph_count_locks(inode, &num_fcntl_locks, &num_flock_locks);
+		unlock_flocks();
+		flocks = kmalloc((num_fcntl_locks+num_flock_locks) *
+				 sizeof(struct ceph_filelock), GFP_NOFS);
+		if (!flocks) {
+			err = -ENOMEM;
+			goto out_free;
+		}
+		lock_flocks();
+		err = ceph_encode_locks_to_buffer(inode, flocks,
+						  num_fcntl_locks,
+						  num_flock_locks);
+		unlock_flocks();
+		if (err) {
+			kfree(flocks);
+			if (err == -ENOSPC)
+				goto encode_again;
+			goto out_free;
+		}
+		/*
+		 * number of encoded locks is stable, so copy to pagelist
+		 */
+		rec.v2.flock_len = cpu_to_le32(2*sizeof(u32) +
+				    (num_fcntl_locks+num_flock_locks) *
+				    sizeof(struct ceph_filelock));
+		err = ceph_pagelist_append(pagelist, &rec, reclen);
+		if (!err)
+			err = ceph_locks_to_pagelist(flocks, pagelist,
+						     num_fcntl_locks,
+						     num_flock_locks);
+		kfree(flocks);
 	} else {
 		err = ceph_pagelist_append(pagelist, &rec, reclen);
 	}
-
 out_free:
 	kfree(path);
 out_dput:
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index fc35036..1b85b76 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -847,8 +847,13 @@ extern const struct export_operations ceph_export_ops;
 extern int ceph_lock(struct file *file, int cmd, struct file_lock *fl);
 extern int ceph_flock(struct file *file, int cmd, struct file_lock *fl);
 extern void ceph_count_locks(struct inode *inode, int *p_num, int *f_num);
-extern int ceph_encode_locks(struct inode *i, struct ceph_pagelist *p,
-			     int p_locks, int f_locks);
+extern int ceph_encode_locks_to_buffer(struct inode *inode,
+				       struct ceph_filelock *flocks,
+				       int num_fcntl_locks,
+				       int num_flock_locks);
+extern int ceph_locks_to_pagelist(struct ceph_filelock *flocks,
+				  struct ceph_pagelist *pagelist,
+				  int num_fcntl_locks, int num_flock_locks);
 extern int lock_to_ceph_filelock(struct file_lock *fl, struct ceph_filelock *c);
 
 /* debugfs.c */
-- 
1.8.1.2

[PATCH 65/93] drm/gma500/psb: Unpin framebuffer on crtc disable

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

commit 820de86a90089ee607d7864538c98a23b503c846 upstream.

The framebuffer needs to be unpinned in the crtc->disable callback
because of previous pinning in psb_intel_pipe_set_base(). This will fix
a memory leak where the framebuffer was released but not unpinned
properly. This patch only affects Poulsbo.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/gma500/psb_intel_display.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c
index 73e44a8..f408dad 100644
--- a/drivers/gpu/drm/gma500/psb_intel_display.c
+++ b/drivers/gpu/drm/gma500/psb_intel_display.c
@@ -1246,6 +1246,19 @@ void psb_intel_crtc_destroy(struct drm_crtc *crtc)
 	kfree(psb_intel_crtc);
 }
 
+static void psb_intel_crtc_disable(struct drm_crtc *crtc)
+{
+	struct gtt_range *gt;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+
+	if (crtc->fb) {
+		gt = to_psb_fb(crtc->fb)->gtt;
+		psb_gtt_unpin(gt);
+	}
+}
+
 const struct drm_crtc_helper_funcs psb_intel_helper_funcs = {
 	.dpms = psb_intel_crtc_dpms,
 	.mode_fixup = psb_intel_crtc_mode_fixup,
@@ -1253,6 +1266,7 @@ const struct drm_crtc_helper_funcs psb_intel_helper_funcs = {
 	.mode_set_base = psb_intel_pipe_set_base,
 	.prepare = psb_intel_crtc_prepare,
 	.commit = psb_intel_crtc_commit,
+	.disable = psb_intel_crtc_disable,
 };
 
 const struct drm_crtc_funcs psb_intel_crtc_funcs = {
-- 
1.8.1.2

[PATCH 66/93] drm/gma500/cdv: Unpin framebuffer on crtc disable

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

commit 22e7c385a80d771aaf3a15ae7ccea3b0686bbe10 upstream.

The framebuffer needs to be unpinned in the crtc->disable callback
because of previous pinning in psb_intel_pipe_set_base(). This will fix
a memory leak where the framebuffer was released but not unpinned
properly. This patch only affects Cedarview.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/gma500/cdv_intel_display.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
index c3e9a0f..a80d61f 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_display.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -1600,6 +1600,19 @@ static void cdv_intel_crtc_destroy(struct drm_crtc *crtc)
 	kfree(psb_intel_crtc);
 }
 
+static void cdv_intel_crtc_disable(struct drm_crtc *crtc)
+{
+	struct gtt_range *gt;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+
+	if (crtc->fb) {
+		gt = to_psb_fb(crtc->fb)->gtt;
+		psb_gtt_unpin(gt);
+	}
+}
+
 const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
 	.dpms = cdv_intel_crtc_dpms,
 	.mode_fixup = cdv_intel_crtc_mode_fixup,
@@ -1607,6 +1620,7 @@ const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
 	.mode_set_base = cdv_intel_pipe_set_base,
 	.prepare = cdv_intel_crtc_prepare,
 	.commit = cdv_intel_crtc_commit,
+	.disable = cdv_intel_crtc_disable,
 };
 
 const struct drm_crtc_funcs cdv_intel_crtc_funcs = {
-- 
1.8.1.2

[PATCH 67/93] drm/i915: prefer VBT modes for SVDO-LVDS over EDID

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit c3456fb3e4712d0448592af3c5d644c9472cd3c1 upstream.

In

commit 53d3b4d7778daf15900867336c85d3f8dd70600c
Author: Egbert Eich <eich@suse.de>
Date:   Tue Jun 4 17:13:21 2013 +0200

    drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC

Egbert Eich fixed a long-standing bug where we simply used a
non-working i2c controller to read the EDID for SDVO-LVDS panels.
Unfortunately some machines seem to not be able to cope with the mode
provided in the EDID. Specifically they seem to not be able to cope
with a 4x pixel mutliplier instead of a 2x one, which seems to have
been worked around by slightly changing the panels native mode in the
VBT so that the dotclock is just barely above 50MHz.

Since it took forever to notice the breakage it's fairly safe to
assume that at least for SDVO-LVDS panels the VBT contains fairly sane
data. So just switch around the order and use VBT modes first.

v2: Also add EDID modes just in case, and spell Egbert correctly.

v3: Elaborate a bit more about what's going on on Chris' machine.

Cc: Egbert Eich <eich@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65524
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/gpu/drm/i915/intel_sdvo.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 63b53d2..00c6af5 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1596,10 +1596,13 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 	 * arranged in priority order.
 	 */
 	intel_ddc_get_modes(connector, &intel_sdvo->ddc);
-	if (list_empty(&connector->probed_modes) == false)
-		goto end;
 
-	/* Fetch modes from VBT */
+	/*
+	 * Fetch modes from VBT. For SDVO prefer the VBT mode since some
+	 * SDVO->LVDS transcoders can't cope with the EDID mode. Since
+	 * drm_mode_probed_add adds the mode at the head of the list we add it
+	 * last.
+	 */
 	if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
 		newmode = drm_mode_duplicate(connector->dev,
 					     dev_priv->sdvo_lvds_vbt_mode);
@@ -1611,7 +1614,6 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 		}
 	}
 
-end:
 	list_for_each_entry(newmode, &connector->probed_modes, head) {
 		if (newmode->type & DRM_MODE_TYPE_PREFERRED) {
 			intel_sdvo->sdvo_lvds_fixed_mode =
-- 
1.8.1.2

[PATCH 68/93] Bluetooth: Fix mgmt handling of power on failures

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hedberg <johan.hedberg@intel.com>

commit 96570ffcca0b872dc8626e97569d2697f374d868 upstream.

If hci_dev_open fails we need to ensure that the corresponding
mgmt_set_powered command gets an appropriate response. This patch fixes
the missing response by adding a new mgmt_set_powered_failed function
that's used to indicate a power on failure to mgmt. Since a situation
with the device being rfkilled may require special handling in user
space the patch uses a new dedicated mgmt status code for this.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 include/net/bluetooth/hci_core.h |  1 +
 include/net/bluetooth/mgmt.h     |  1 +
 net/bluetooth/hci_core.c         |  6 +++++-
 net/bluetooth/mgmt.c             | 21 +++++++++++++++++++++
 4 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 9fc7728..e3fe61f 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -981,6 +981,7 @@ void hci_sock_dev_event(struct hci_dev *hdev, int event);
 int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len);
 int mgmt_index_added(struct hci_dev *hdev);
 int mgmt_index_removed(struct hci_dev *hdev);
+int mgmt_set_powered_failed(struct hci_dev *hdev, int err);
 int mgmt_powered(struct hci_dev *hdev, u8 powered);
 int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable);
 int mgmt_connectable(struct hci_dev *hdev, u8 connectable);
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
index 23fd054..4ea860e 100644
--- a/include/net/bluetooth/mgmt.h
+++ b/include/net/bluetooth/mgmt.h
@@ -42,6 +42,7 @@
 #define MGMT_STATUS_NOT_POWERED		0x0f
 #define MGMT_STATUS_CANCELLED		0x10
 #define MGMT_STATUS_INVALID_INDEX	0x11
+#define MGMT_STATUS_RFKILLED		0x12
 
 struct mgmt_hdr {
 	__le16	opcode;
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index de01610..448a574 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1097,11 +1097,15 @@ static const struct rfkill_ops hci_rfkill_ops = {
 static void hci_power_on(struct work_struct *work)
 {
 	struct hci_dev *hdev = container_of(work, struct hci_dev, power_on);
+	int err;
 
 	BT_DBG("%s", hdev->name);
 
-	if (hci_dev_open(hdev->id) < 0)
+	err = hci_dev_open(hdev->id);
+	if (err < 0) {
+		mgmt_set_powered_failed(hdev, err);
 		return;
+	}
 
 	if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags))
 		schedule_delayed_work(&hdev->power_off,
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index ec098bd..6406d7e 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -2912,6 +2912,27 @@ int mgmt_powered(struct hci_dev *hdev, u8 powered)
 	return err;
 }
 
+int mgmt_set_powered_failed(struct hci_dev *hdev, int err)
+{
+	struct pending_cmd *cmd;
+	u8 status;
+
+	cmd = mgmt_pending_find(MGMT_OP_SET_POWERED, hdev);
+	if (!cmd)
+		return -ENOENT;
+
+	if (err == -ERFKILL)
+		status = MGMT_STATUS_RFKILLED;
+	else
+		status = MGMT_STATUS_FAILED;
+
+	err = cmd_status(cmd->sk, hdev->id, MGMT_OP_SET_POWERED, status);
+
+	mgmt_pending_remove(cmd);
+
+	return err;
+}
+
 int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable)
 {
 	struct cmd_lookup match = { NULL, hdev };
-- 
1.8.1.2

[PATCH 69/93] ath9k: Disable PowerSave by default

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

commit 531671cb17af07281e6f28c1425f754346e65c41 upstream.

Almost all the DMA issues which have plagued ath9k (in station mode)
for years are related to PS. Disabling PS usually "fixes" the user's
connection stablility. Reports of DMA problems are still trickling in
and are sitting in the kernel bugzilla. Until the PS code in ath9k is
given a thorough review, disbale it by default. The slight increase
in chip power consumption is a small price to pay for improved link
stability.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/wireless/ath/ath9k/init.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index dee9e09..377846b 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -696,8 +696,7 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	hw->wiphy->iface_combinations = &if_comb;
 	hw->wiphy->n_iface_combinations = 1;
 
-	if (AR_SREV_5416(sc->sc_ah))
-		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
-- 
1.8.1.2

[PATCH 70/93] Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity"

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 96005931785238e1a24febf65ffb5016273e8225 upstream.

This reverts commit 68d9e1fa24d9c7c2e527f49df8d18fb8cf0ec943

This change reduces rx sensitivity with no apparent extra benefit.
It looks like it was meant for testing in a specific scenario,
but it was never properly validated.

Cc: rmanohar@qca.qualcomm.com
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index bad8cd1..4e2a52c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -777,11 +777,11 @@ static const u32 ar9300Common_rx_gain_table_2p2[][2] = {
 	{0x0000a074, 0x00000000},
 	{0x0000a078, 0x00000000},
 	{0x0000a07c, 0x00000000},
-	{0x0000a080, 0x1a1a1a1a},
-	{0x0000a084, 0x1a1a1a1a},
-	{0x0000a088, 0x1a1a1a1a},
-	{0x0000a08c, 0x1a1a1a1a},
-	{0x0000a090, 0x171a1a1a},
+	{0x0000a080, 0x22222229},
+	{0x0000a084, 0x1d1d1d1d},
+	{0x0000a088, 0x1d1d1d1d},
+	{0x0000a08c, 0x1d1d1d1d},
+	{0x0000a090, 0x171d1d1d},
 	{0x0000a094, 0x11111717},
 	{0x0000a098, 0x00030311},
 	{0x0000a09c, 0x00000000},
-- 
1.8.1.2

[PATCH 71/93] ath9k: Use minstrel rate control by default

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@qca.qualcomm.com>

commit 5efac94999ff218e0101f67a059e44abb4b0b523 upstream.

The ath9k rate control algorithm has various architectural
issues that make it a poor fit in scenarios like congested
environments etc.

An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191

Change the default to minstrel which is more robust in such cases.
The ath9k RC code is left in the driver for now, maybe it can
be removed altogether later on.

Cc: Jouni Malinen <jouni@qca.qualcomm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[ luis: backport to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/wireless/ath/ath9k/Kconfig  | 10 +++++++---
 drivers/net/wireless/ath/ath9k/Makefile |  2 +-
 drivers/net/wireless/ath/ath9k/init.c   |  4 ----
 drivers/net/wireless/ath/ath9k/rc.h     |  2 +-
 4 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index e507e78..3b8c930 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -89,13 +89,17 @@ config ATH9K_MAC_DEBUG
 	  This option enables collection of statistics for Rx/Tx status
 	  data and some other MAC related statistics
 
-config ATH9K_RATE_CONTROL
+config ATH9K_LEGACY_RATE_CONTROL
 	bool "Atheros ath9k rate control"
 	depends on ATH9K
-	default y
+	default n
 	---help---
 	  Say Y, if you want to use the ath9k specific rate control
-	  module instead of minstrel_ht.
+	  module instead of minstrel_ht. Be warned that there are various
+	  issues with the ath9k RC and minstrel is a more robust algorithm.
+	  Note that even if this option is selected, "ath9k_rate_control"
+	  has to be passed to mac80211 using the module parameter,
+	  ieee80211_default_rc_algo.
 
 config ATH9K_HTC
        tristate "Atheros HTC based wireless cards support"
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 3f0b8472..04b51c5 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -6,7 +6,7 @@ ath9k-y +=	beacon.o \
 		xmit.o
 
 ath9k-$(CONFIG_ATH9K_BTCOEX_SUPPORT) += mci.o
-ath9k-$(CONFIG_ATH9K_RATE_CONTROL) += rc.o
+ath9k-$(CONFIG_ATH9K_LEGACY_RATE_CONTROL) += rc.o
 ath9k-$(CONFIG_ATH9K_PCI) += pci.o
 ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
 ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 377846b..9aa005e 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -720,10 +720,6 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	sc->ant_rx = hw->wiphy->available_antennas_rx;
 	sc->ant_tx = hw->wiphy->available_antennas_tx;
 
-#ifdef CONFIG_ATH9K_RATE_CONTROL
-	hw->rate_control_algorithm = "ath9k_rate_control";
-#endif
-
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 			&sc->sbands[IEEE80211_BAND_2GHZ];
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index 75f8e9b..12cf122 100644
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -219,7 +219,7 @@ struct ath_rate_priv {
 	struct ath_rc_stats rcstats[RATE_TABLE_SIZE];
 };
 
-#ifdef CONFIG_ATH9K_RATE_CONTROL
+#ifdef CONFIG_ATH9K_LEGACY_RATE_CONTROL
 int ath_rate_control_register(void);
 void ath_rate_control_unregister(void);
 #else
-- 
1.8.1.2

[PATCH 72/93] b43: stop format string leaking into error msgs

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit e0e29b683d6784ef59bbc914eac85a04b650e63c upstream.

The module parameter "fwpostfix" is userspace controllable, unfiltered,
and is used to define the firmware filename. b43_do_request_fw() populates
ctx->errors[] on error, containing the firmware filename. b43err()
parses its arguments as a format string. For systems with b43 hardware,
this could lead to a uid-0 to ring-0 escalation.

CVE-2013-2852

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/wireless/b43/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index f8fd420..5b349da 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2451,7 +2451,7 @@ static void b43_request_firmware(struct work_struct *work)
 	for (i = 0; i < B43_NR_FWTYPES; i++) {
 		errmsg = ctx->errors[i];
 		if (strlen(errmsg))
-			b43err(dev->wl, errmsg);
+			b43err(dev->wl, "%s", errmsg);
 	}
 	b43_print_fw_helptext(dev->wl, 1);
 	goto out;
-- 
1.8.1.2

[PATCH 73/93] CPU hotplug: provide a generic helper to disable/enable CPU hotplug

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>

commit 16e53dbf10a2d7e228709a7286310e629ede5e45 upstream.

There are instances in the kernel where we would like to disable CPU
hotplug (from sysfs) during some important operation.  Today the freezer
code depends on this and the code to do it was kinda tailor-made for
that.

Restructure the code and make it generic enough to be useful for other
usecases too.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 include/linux/cpu.h |  4 ++++
 kernel/cpu.c        | 55 ++++++++++++++++++++++-------------------------------
 2 files changed, 27 insertions(+), 32 deletions(-)

diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index ce7a074..714e792 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -175,6 +175,8 @@ extern struct bus_type cpu_subsys;
 
 extern void get_online_cpus(void);
 extern void put_online_cpus(void);
+extern void cpu_hotplug_disable(void);
+extern void cpu_hotplug_enable(void);
 #define hotcpu_notifier(fn, pri)	cpu_notifier(fn, pri)
 #define register_hotcpu_notifier(nb)	register_cpu_notifier(nb)
 #define unregister_hotcpu_notifier(nb)	unregister_cpu_notifier(nb)
@@ -198,6 +200,8 @@ static inline void cpu_hotplug_driver_unlock(void)
 
 #define get_online_cpus()	do { } while (0)
 #define put_online_cpus()	do { } while (0)
+#define cpu_hotplug_disable()	do { } while (0)
+#define cpu_hotplug_enable()	do { } while (0)
 #define hotcpu_notifier(fn, pri)	do { (void)(fn); } while (0)
 /* These aren't inline functions due to a GCC bug. */
 #define register_hotcpu_notifier(nb)	({ (void)(nb); 0; })
diff --git a/kernel/cpu.c b/kernel/cpu.c
index a4eb522..42b5ffc 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -129,6 +129,27 @@ static void cpu_hotplug_done(void)
 	mutex_unlock(&cpu_hotplug.lock);
 }
 
+/*
+ * Wait for currently running CPU hotplug operations to complete (if any) and
+ * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects
+ * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the
+ * hotplug path before performing hotplug operations. So acquiring that lock
+ * guarantees mutual exclusion from any currently running hotplug operations.
+ */
+void cpu_hotplug_disable(void)
+{
+	cpu_maps_update_begin();
+	cpu_hotplug_disabled = 1;
+	cpu_maps_update_done();
+}
+
+void cpu_hotplug_enable(void)
+{
+	cpu_maps_update_begin();
+	cpu_hotplug_disabled = 0;
+	cpu_maps_update_done();
+}
+
 #else /* #if CONFIG_HOTPLUG_CPU */
 static void cpu_hotplug_begin(void) {}
 static void cpu_hotplug_done(void) {}
@@ -534,36 +555,6 @@ static int __init alloc_frozen_cpus(void)
 core_initcall(alloc_frozen_cpus);
 
 /*
- * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU
- * hotplug when tasks are about to be frozen. Also, don't allow the freezer
- * to continue until any currently running CPU hotplug operation gets
- * completed.
- * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the
- * 'cpu_add_remove_lock'. And this same lock is also taken by the regular
- * CPU hotplug path and released only after it is complete. Thus, we
- * (and hence the freezer) will block here until any currently running CPU
- * hotplug operation gets completed.
- */
-void cpu_hotplug_disable_before_freeze(void)
-{
-	cpu_maps_update_begin();
-	cpu_hotplug_disabled = 1;
-	cpu_maps_update_done();
-}
-
-
-/*
- * When tasks have been thawed, re-enable regular CPU hotplug (which had been
- * disabled while beginning to freeze tasks).
- */
-void cpu_hotplug_enable_after_thaw(void)
-{
-	cpu_maps_update_begin();
-	cpu_hotplug_disabled = 0;
-	cpu_maps_update_done();
-}
-
-/*
  * When callbacks for CPU hotplug notifications are being executed, we must
  * ensure that the state of the system with respect to the tasks being frozen
  * or not, as reported by the notification, remains unchanged *throughout the
@@ -582,12 +573,12 @@ cpu_hotplug_pm_callback(struct notifier_block *nb,
 
 	case PM_SUSPEND_PREPARE:
 	case PM_HIBERNATION_PREPARE:
-		cpu_hotplug_disable_before_freeze();
+		cpu_hotplug_disable();
 		break;
 
 	case PM_POST_SUSPEND:
 	case PM_POST_HIBERNATION:
-		cpu_hotplug_enable_after_thaw();
+		cpu_hotplug_enable();
 		break;
 
 	default:
-- 
1.8.1.2

[PATCH 74/93] reboot: rigrate shutdown/reboot to boot cpu

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robin Holt <holt@sgi.com>

commit cf7df378aa4ff7da3a44769b7ff6e9eef1a9f3db upstream.

We recently noticed that reboot of a 1024 cpu machine takes approx 16
minutes of just stopping the cpus.  The slowdown was tracked to commit
f96972f2dc63 ("kernel/sys.c: call disable_nonboot_cpus() in
kernel_restart()").

The current implementation does all the work of hot removing the cpus
before halting the system.  We are switching to just migrating to the
boot cpu and then continuing with shutdown/reboot.

This also has the effect of not breaking x86's command line parameter
for specifying the reboot cpu.  Note, this code was shamelessly copied
from arch/x86/kernel/reboot.c with bits removed pertaining to the
reboot_cpu command line parameter.

Signed-off-by: Robin Holt <holt@sgi.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 kernel/sys.c | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/kernel/sys.c b/kernel/sys.c
index 0836a7f..1451e54 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -356,6 +356,29 @@ int unregister_reboot_notifier(struct notifier_block *nb)
 }
 EXPORT_SYMBOL(unregister_reboot_notifier);
 
+/* Add backwards compatibility for stable trees. */
+#ifndef PF_NO_SETAFFINITY
+#define PF_NO_SETAFFINITY		PF_THREAD_BOUND
+#endif
+
+static void migrate_to_reboot_cpu(void)
+{
+	/* The boot cpu is always logical cpu 0 */
+	int cpu = 0;
+
+	cpu_hotplug_disable();
+
+	/* Make certain the cpu I'm about to reboot on is online */
+	if (!cpu_online(cpu))
+		cpu = cpumask_first(cpu_online_mask);
+
+	/* Prevent races with other tasks migrating this task */
+	current->flags |= PF_NO_SETAFFINITY;
+
+	/* Make certain I only run on the appropriate processor */
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
+}
+
 /**
  *	kernel_restart - reboot the system
  *	@cmd: pointer to buffer containing command to execute for restart
@@ -367,7 +390,7 @@ EXPORT_SYMBOL(unregister_reboot_notifier);
 void kernel_restart(char *cmd)
 {
 	kernel_restart_prepare(cmd);
-	disable_nonboot_cpus();
+	migrate_to_reboot_cpu();
 	syscore_shutdown();
 	if (!cmd)
 		printk(KERN_EMERG "Restarting system.\n");
@@ -394,7 +417,7 @@ static void kernel_shutdown_prepare(enum system_states state)
 void kernel_halt(void)
 {
 	kernel_shutdown_prepare(SYSTEM_HALT);
-	disable_nonboot_cpus();
+	migrate_to_reboot_cpu();
 	syscore_shutdown();
 	printk(KERN_EMERG "System halted.\n");
 	kmsg_dump(KMSG_DUMP_HALT);
@@ -413,7 +436,7 @@ void kernel_power_off(void)
 	kernel_shutdown_prepare(SYSTEM_POWER_OFF);
 	if (pm_power_off_prepare)
 		pm_power_off_prepare();
-	disable_nonboot_cpus();
+	migrate_to_reboot_cpu();
 	syscore_shutdown();
 	printk(KERN_EMERG "Power down.\n");
 	kmsg_dump(KMSG_DUMP_POWEROFF);
-- 
1.8.1.2

[PATCH 75/93] kmsg: honor dmesg_restrict sysctl on /dev/kmsg

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 637241a900cbd982f744d44646b48a273d609b34 upstream.

The dmesg_restrict sysctl currently covers the syslog method for access
dmesg, however /dev/kmsg isn't covered by the same protections.  Most
people haven't noticed because util-linux dmesg(1) defaults to using the
syslog method for access in older versions.  With util-linux dmesg(1)
defaults to reading directly from /dev/kmsg.

To fix /dev/kmsg, let's compare the existing interfaces and what they
allow:

 - /proc/kmsg allows:
  - open (SYSLOG_ACTION_OPEN) if CAP_SYSLOG since it uses a destructive
    single-reader interface (SYSLOG_ACTION_READ).
  - everything, after an open.

 - syslog syscall allows:
  - anything, if CAP_SYSLOG.
  - SYSLOG_ACTION_READ_ALL and SYSLOG_ACTION_SIZE_BUFFER, if
    dmesg_restrict==0.
  - nothing else (EPERM).

The use-cases were:
 - dmesg(1) needs to do non-destructive SYSLOG_ACTION_READ_ALLs.
 - sysklog(1) needs to open /proc/kmsg, drop privs, and still issue the
   destructive SYSLOG_ACTION_READs.

AIUI, dmesg(1) is moving to /dev/kmsg, and systemd-journald doesn't
clear the ring buffer.

Based on the comments in devkmsg_llseek, it sounds like actions besides
reading aren't going to be supported by /dev/kmsg (i.e.
SYSLOG_ACTION_CLEAR), so we have a strict subset of the non-destructive
syslog syscall actions.

To this end, move the check as Josh had done, but also rename the
constants to reflect their new uses (SYSLOG_FROM_CALL becomes
SYSLOG_FROM_READER, and SYSLOG_FROM_FILE becomes SYSLOG_FROM_PROC).
SYSLOG_FROM_READER allows non-destructive actions, and SYSLOG_FROM_PROC
allows destructive actions after a capabilities-constrained
SYSLOG_ACTION_OPEN check.

 - /dev/kmsg allows:
  - open if CAP_SYSLOG or dmesg_restrict==0
  - reading/polling, after open

Addresses https://bugzilla.redhat.com/show_bug.cgi?id=903192

[akpm@linux-foundation.org: use pr_warn_once()]
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Christian Kujau <lists@nerdbynature.de>
Tested-by: Josh Boyer <jwboyer@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/proc/kmsg.c         | 10 +++---
 include/linux/syslog.h |  4 +--
 kernel/printk.c        | 91 +++++++++++++++++++++++++++-----------------------
 3 files changed, 57 insertions(+), 48 deletions(-)

diff --git a/fs/proc/kmsg.c b/fs/proc/kmsg.c
index bd4b5a7..bdfabda 100644
--- a/fs/proc/kmsg.c
+++ b/fs/proc/kmsg.c
@@ -21,12 +21,12 @@ extern wait_queue_head_t log_wait;
 
 static int kmsg_open(struct inode * inode, struct file * file)
 {
-	return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_FILE);
+	return do_syslog(SYSLOG_ACTION_OPEN, NULL, 0, SYSLOG_FROM_PROC);
 }
 
 static int kmsg_release(struct inode * inode, struct file * file)
 {
-	(void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_FILE);
+	(void) do_syslog(SYSLOG_ACTION_CLOSE, NULL, 0, SYSLOG_FROM_PROC);
 	return 0;
 }
 
@@ -34,15 +34,15 @@ static ssize_t kmsg_read(struct file *file, char __user *buf,
 			 size_t count, loff_t *ppos)
 {
 	if ((file->f_flags & O_NONBLOCK) &&
-	    !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE))
+	    !do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_PROC))
 		return -EAGAIN;
-	return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_FILE);
+	return do_syslog(SYSLOG_ACTION_READ, buf, count, SYSLOG_FROM_PROC);
 }
 
 static unsigned int kmsg_poll(struct file *file, poll_table *wait)
 {
 	poll_wait(file, &log_wait, wait);
-	if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_FILE))
+	if (do_syslog(SYSLOG_ACTION_SIZE_UNREAD, NULL, 0, SYSLOG_FROM_PROC))
 		return POLLIN | POLLRDNORM;
 	return 0;
 }
diff --git a/include/linux/syslog.h b/include/linux/syslog.h
index 3891139..98a3153 100644
--- a/include/linux/syslog.h
+++ b/include/linux/syslog.h
@@ -44,8 +44,8 @@
 /* Return size of the log buffer */
 #define SYSLOG_ACTION_SIZE_BUFFER   10
 
-#define SYSLOG_FROM_CALL 0
-#define SYSLOG_FROM_FILE 1
+#define SYSLOG_FROM_READER           0
+#define SYSLOG_FROM_PROC             1
 
 int do_syslog(int type, char __user *buf, int count, bool from_file);
 
diff --git a/kernel/printk.c b/kernel/printk.c
index 46f0c2c..5758501 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -357,6 +357,53 @@ static void log_store(int facility, int level,
 	log_next_seq++;
 }
 
+#ifdef CONFIG_SECURITY_DMESG_RESTRICT
+int dmesg_restrict = 1;
+#else
+int dmesg_restrict;
+#endif
+
+static int syslog_action_restricted(int type)
+{
+	if (dmesg_restrict)
+		return 1;
+	/*
+	 * Unless restricted, we allow "read all" and "get buffer size"
+	 * for everybody.
+	 */
+	return type != SYSLOG_ACTION_READ_ALL &&
+	       type != SYSLOG_ACTION_SIZE_BUFFER;
+}
+
+static int check_syslog_permissions(int type, bool from_file)
+{
+	/*
+	 * If this is from /proc/kmsg and we've already opened it, then we've
+	 * already done the capabilities checks at open time.
+	 */
+	if (from_file && type != SYSLOG_ACTION_OPEN)
+		return 0;
+
+	if (syslog_action_restricted(type)) {
+		if (capable(CAP_SYSLOG))
+			return 0;
+		/*
+		 * For historical reasons, accept CAP_SYS_ADMIN too, with
+		 * a warning.
+		 */
+		if (capable(CAP_SYS_ADMIN)) {
+			pr_warn_once("%s (%d): Attempt to access syslog with "
+				     "CAP_SYS_ADMIN but no CAP_SYSLOG "
+				     "(deprecated).\n",
+				 current->comm, task_pid_nr(current));
+			return 0;
+		}
+		return -EPERM;
+	}
+	return security_syslog(type);
+}
+
+
 /* /dev/kmsg - userspace message inject/listen interface */
 struct devkmsg_user {
 	u64 seq;
@@ -592,7 +639,8 @@ static int devkmsg_open(struct inode *inode, struct file *file)
 	if ((file->f_flags & O_ACCMODE) == O_WRONLY)
 		return 0;
 
-	err = security_syslog(SYSLOG_ACTION_READ_ALL);
+	err = check_syslog_permissions(SYSLOG_ACTION_READ_ALL,
+				       SYSLOG_FROM_READER);
 	if (err)
 		return err;
 
@@ -759,45 +807,6 @@ static inline void boot_delay_msec(void)
 }
 #endif
 
-#ifdef CONFIG_SECURITY_DMESG_RESTRICT
-int dmesg_restrict = 1;
-#else
-int dmesg_restrict;
-#endif
-
-static int syslog_action_restricted(int type)
-{
-	if (dmesg_restrict)
-		return 1;
-	/* Unless restricted, we allow "read all" and "get buffer size" for everybody */
-	return type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER;
-}
-
-static int check_syslog_permissions(int type, bool from_file)
-{
-	/*
-	 * If this is from /proc/kmsg and we've already opened it, then we've
-	 * already done the capabilities checks at open time.
-	 */
-	if (from_file && type != SYSLOG_ACTION_OPEN)
-		return 0;
-
-	if (syslog_action_restricted(type)) {
-		if (capable(CAP_SYSLOG))
-			return 0;
-		/* For historical reasons, accept CAP_SYS_ADMIN too, with a warning */
-		if (capable(CAP_SYS_ADMIN)) {
-			printk_once(KERN_WARNING "%s (%d): "
-				 "Attempt to access syslog with CAP_SYS_ADMIN "
-				 "but no CAP_SYSLOG (deprecated).\n",
-				 current->comm, task_pid_nr(current));
-			return 0;
-		}
-		return -EPERM;
-	}
-	return 0;
-}
-
 #if defined(CONFIG_PRINTK_TIME)
 static bool printk_time = 1;
 #else
@@ -1195,7 +1204,7 @@ out:
 
 SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
 {
-	return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
+	return do_syslog(type, buf, len, SYSLOG_FROM_READER);
 }
 
 static bool __read_mostly ignore_loglevel;
-- 
1.8.1.2

[PATCH 76/93] cciss: fix broken mutex usage in ioctl

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>

commit 03f47e888daf56c8e9046c674719a0bcc644eed5 upstream.

If a new logical drive is added and the CCISS_REGNEWD ioctl is invoked
(as is normal with the Array Configuration Utility) the process will
hang as below.  It attempts to acquire the same mutex twice, once in
do_ioctl() and once in cciss_unlocked_open().  The BKL was recursive,
the mutex isn't.

  Linux version 3.10.0-rc2 (scameron@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri May 24 14:32:12 CDT 2013
  [...]
  acu             D 0000000000000001     0  3246   3191 0x00000080
  Call Trace:
    schedule+0x29/0x70
    schedule_preempt_disabled+0xe/0x10
    __mutex_lock_slowpath+0x17b/0x220
    mutex_lock+0x2b/0x50
    cciss_unlocked_open+0x2f/0x110 [cciss]
    __blkdev_get+0xd3/0x470
    blkdev_get+0x5c/0x1e0
    register_disk+0x182/0x1a0
    add_disk+0x17c/0x310
    cciss_add_disk+0x13a/0x170 [cciss]
    cciss_update_drive_info+0x39b/0x480 [cciss]
    rebuild_lun_table+0x258/0x370 [cciss]
    cciss_ioctl+0x34f/0x470 [cciss]
    do_ioctl+0x49/0x70 [cciss]
    __blkdev_driver_ioctl+0x28/0x30
    blkdev_ioctl+0x200/0x7b0
    block_ioctl+0x3c/0x40
    do_vfs_ioctl+0x89/0x350
    SyS_ioctl+0xa1/0xb0
    system_call_fastpath+0x16/0x1b

This mutex usage was added into the ioctl path when the big kernel lock
was removed.  As it turns out, these paths are all thread safe anyway
(or can easily be made so) and we don't want ioctl() to be single
threaded in any case.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ luis: backported to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/block/cciss.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b0f553b..d3446f6 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -161,8 +161,6 @@ static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id);
 static int cciss_open(struct block_device *bdev, fmode_t mode);
 static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode);
 static int cciss_release(struct gendisk *disk, fmode_t mode);
-static int do_ioctl(struct block_device *bdev, fmode_t mode,
-		    unsigned int cmd, unsigned long arg);
 static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
 		       unsigned int cmd, unsigned long arg);
 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
@@ -229,7 +227,7 @@ static const struct block_device_operations cciss_fops = {
 	.owner = THIS_MODULE,
 	.open = cciss_unlocked_open,
 	.release = cciss_release,
-	.ioctl = do_ioctl,
+	.ioctl = cciss_ioctl,
 	.getgeo = cciss_getgeo,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = cciss_compat_ioctl,
@@ -1140,16 +1138,6 @@ static int cciss_release(struct gendisk *disk, fmode_t mode)
 	return 0;
 }
 
-static int do_ioctl(struct block_device *bdev, fmode_t mode,
-		    unsigned cmd, unsigned long arg)
-{
-	int ret;
-	mutex_lock(&cciss_mutex);
-	ret = cciss_ioctl(bdev, mode, cmd, arg);
-	mutex_unlock(&cciss_mutex);
-	return ret;
-}
-
 #ifdef CONFIG_COMPAT
 
 static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
@@ -1176,7 +1164,7 @@ static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode,
 	case CCISS_REGNEWD:
 	case CCISS_RESCANDISK:
 	case CCISS_GETLUNINFO:
-		return do_ioctl(bdev, mode, cmd, arg);
+		return cciss_ioctl(bdev, mode, cmd, arg);
 
 	case CCISS_PASSTHRU32:
 		return cciss_ioctl32_passthru(bdev, mode, cmd, arg);
@@ -1216,7 +1204,7 @@ static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
 	if (err)
 		return -EFAULT;
 
-	err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p);
+	err = cciss_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p);
 	if (err)
 		return err;
 	err |=
@@ -1258,7 +1246,7 @@ static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
 	if (err)
 		return -EFAULT;
 
-	err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p);
+	err = cciss_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p);
 	if (err)
 		return err;
 	err |=
@@ -1308,11 +1296,14 @@ static int cciss_getpciinfo(ctlr_info_t *h, void __user *argp)
 static int cciss_getintinfo(ctlr_info_t *h, void __user *argp)
 {
 	cciss_coalint_struct intinfo;
+	unsigned long flags;
 
 	if (!argp)
 		return -EINVAL;
+	spin_lock_irqsave(&h->lock, flags);
 	intinfo.delay = readl(&h->cfgtable->HostWrite.CoalIntDelay);
 	intinfo.count = readl(&h->cfgtable->HostWrite.CoalIntCount);
+	spin_unlock_irqrestore(&h->lock, flags);
 	if (copy_to_user
 	    (argp, &intinfo, sizeof(cciss_coalint_struct)))
 		return -EFAULT;
@@ -1353,12 +1344,15 @@ static int cciss_setintinfo(ctlr_info_t *h, void __user *argp)
 static int cciss_getnodename(ctlr_info_t *h, void __user *argp)
 {
 	NodeName_type NodeName;
+	unsigned long flags;
 	int i;
 
 	if (!argp)
 		return -EINVAL;
+	spin_lock_irqsave(&h->lock, flags);
 	for (i = 0; i < 16; i++)
 		NodeName[i] = readb(&h->cfgtable->ServerName[i]);
+	spin_unlock_irqrestore(&h->lock, flags);
 	if (copy_to_user(argp, NodeName, sizeof(NodeName_type)))
 		return -EFAULT;
 	return 0;
@@ -1395,10 +1389,13 @@ static int cciss_setnodename(ctlr_info_t *h, void __user *argp)
 static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp)
 {
 	Heartbeat_type heartbeat;
+	unsigned long flags;
 
 	if (!argp)
 		return -EINVAL;
+	spin_lock_irqsave(&h->lock, flags);
 	heartbeat = readl(&h->cfgtable->HeartBeat);
+	spin_unlock_irqrestore(&h->lock, flags);
 	if (copy_to_user(argp, &heartbeat, sizeof(Heartbeat_type)))
 		return -EFAULT;
 	return 0;
@@ -1407,10 +1404,13 @@ static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp)
 static int cciss_getbustypes(ctlr_info_t *h, void __user *argp)
 {
 	BusTypes_type BusTypes;
+	unsigned long flags;
 
 	if (!argp)
 		return -EINVAL;
+	spin_lock_irqsave(&h->lock, flags);
 	BusTypes = readl(&h->cfgtable->BusTypes);
+	spin_unlock_irqrestore(&h->lock, flags);
 	if (copy_to_user(argp, &BusTypes, sizeof(BusTypes_type)))
 		return -EFAULT;
 	return 0;
-- 
1.8.1.2

[PATCH 77/93] drivers/rtc/rtc-twl.c: fix missing device_init_wakeup() when booted with device tree

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

commit 24b8256a1fb28d357bc6fa09184ba29b4255ba5c upstream.

When booted in legacy mode device_init_wakeup() gets called by
drivers/mfd/twl-core.c when the children are initialized.  However, when
booted using device tree, the children are created with
of_platform_populate() instead add_children().

This means that the RTC driver will not have device_init_wakeup() set,
and we need to call it from the driver probe like RTC drivers typically
do.

Without this we cannot test PM wake-up events on omaps for cases where
there may not be any physical wake-up event.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Reported-by: Kevin Hilman <khilman@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/rtc/rtc-twl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index 9277d94..1789a25 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -523,6 +523,7 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, rtc);
+	device_init_wakeup(&pdev->dev, 1);
 	return 0;
 
 out2:
-- 
1.8.1.2

[PATCH 78/93] swap: avoid read_swap_cache_async() race to deadlock while waiting on discard I/O completion

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafael Aquini <aquini@redhat.com>

commit cbab0e4eec299e9059199ebe6daf48730be46d2b upstream.

read_swap_cache_async() can race against get_swap_page(), and stumble
across a SWAP_HAS_CACHE entry in the swap map whose page wasn't brought
into the swapcache yet.

This transient swap_map state is expected to be transitory, but the
actual placement of discard at scan_swap_map() inserts a wait for I/O
completion thus making the thread at read_swap_cache_async() to loop
around its -EEXIST case, while the other end at get_swap_page() is
scheduled away at scan_swap_map().  This can leave the system deadlocked
if the I/O completion happens to be waiting on the CPU waitqueue where
read_swap_cache_async() is busy looping and !CONFIG_PREEMPT.

This patch introduces a cond_resched() call to make the aforementioned
read_swap_cache_async() busy loop condition to bail out when necessary,
thus avoiding the subtle race window.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 mm/swap_state.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/mm/swap_state.c b/mm/swap_state.c
index 4c5ff7f..1fa9220 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -313,8 +313,24 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
 		 * Swap entry may have been freed since our caller observed it.
 		 */
 		err = swapcache_prepare(entry);
-		if (err == -EEXIST) {	/* seems racy */
+		if (err == -EEXIST) {
 			radix_tree_preload_end();
+			/*
+			 * We might race against get_swap_page() and stumble
+			 * across a SWAP_HAS_CACHE swap_map entry whose page
+			 * has not been brought into the swapcache yet, while
+			 * the other end is scheduled away waiting on discard
+			 * I/O completion at scan_swap_map().
+			 *
+			 * In order to avoid turning this transitory state
+			 * into a permanent loop around this -EEXIST case
+			 * if !CONFIG_PREEMPT and the I/O completion happens
+			 * to be waiting on the CPU waitqueue where we are now
+			 * busy looping, we just conditionally invoke the
+			 * scheduler here, if there are some more important
+			 * tasks to run.
+			 */
+			cond_resched();
 			continue;
 		}
 		if (err) {		/* swp entry is obsolete ? */
-- 
1.8.1.2

[PATCH 79/93] mm: migration: add migrate_entry_wait_huge()

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

commit 30dad30922ccc733cfdbfe232090cf674dc374dc upstream.

When we have a page fault for the address which is backed by a hugepage
under migration, the kernel can't wait correctly and do busy looping on
hugepage fault until the migration finishes.  As a result, users who try
to kick hugepage migration (via soft offlining, for example) occasionally
experience long delay or soft lockup.

This is because pte_offset_map_lock() can't get a correct migration entry
or a correct page table lock for hugepage.  This patch introduces
migration_entry_wait_huge() to solve this.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 include/linux/swapops.h |  3 +++
 mm/hugetlb.c            |  2 +-
 mm/migrate.c            | 23 ++++++++++++++++++-----
 3 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/include/linux/swapops.h b/include/linux/swapops.h
index 47ead51..c5fd30d 100644
--- a/include/linux/swapops.h
+++ b/include/linux/swapops.h
@@ -137,6 +137,7 @@ static inline void make_migration_entry_read(swp_entry_t *entry)
 
 extern void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
 					unsigned long address);
+extern void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte);
 #else
 
 #define make_migration_entry(page, write) swp_entry(0, 0)
@@ -148,6 +149,8 @@ static inline int is_migration_entry(swp_entry_t swp)
 static inline void make_migration_entry_read(swp_entry_t *entryp) { }
 static inline void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
 					 unsigned long address) { }
+static inline void migration_entry_wait_huge(struct mm_struct *mm,
+					pte_t *pte) { }
 static inline int is_write_migration_entry(swp_entry_t entry)
 {
 	return 0;
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 74b8327..c6557ef 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2769,7 +2769,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 	if (ptep) {
 		entry = huge_ptep_get(ptep);
 		if (unlikely(is_hugetlb_entry_migration(entry))) {
-			migration_entry_wait(mm, (pmd_t *)ptep, address);
+			migration_entry_wait_huge(mm, ptep);
 			return 0;
 		} else if (unlikely(is_hugetlb_entry_hwpoisoned(entry)))
 			return VM_FAULT_HWPOISON_LARGE |
diff --git a/mm/migrate.c b/mm/migrate.c
index 65cc229..41e906a 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -182,15 +182,14 @@ static void remove_migration_ptes(struct page *old, struct page *new)
  * get to the page and wait until migration is finished.
  * When we return from this function the fault will be retried.
  */
-void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
-				unsigned long address)
+static void __migration_entry_wait(struct mm_struct *mm, pte_t *ptep,
+				spinlock_t *ptl)
 {
-	pte_t *ptep, pte;
-	spinlock_t *ptl;
+	pte_t pte;
 	swp_entry_t entry;
 	struct page *page;
 
-	ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
+	spin_lock(ptl);
 	pte = *ptep;
 	if (!is_swap_pte(pte))
 		goto out;
@@ -218,6 +217,20 @@ out:
 	pte_unmap_unlock(ptep, ptl);
 }
 
+void migration_entry_wait(struct mm_struct *mm, pmd_t *pmd,
+				unsigned long address)
+{
+	spinlock_t *ptl = pte_lockptr(mm, pmd);
+	pte_t *ptep = pte_offset_map(pmd, address);
+	__migration_entry_wait(mm, ptep, ptl);
+}
+
+void migration_entry_wait_huge(struct mm_struct *mm, pte_t *pte)
+{
+	spinlock_t *ptl = &(mm)->page_table_lock;
+	__migration_entry_wait(mm, pte, ptl);
+}
+
 #ifdef CONFIG_BLOCK
 /* Returns true if all buffers are successfully locked */
 static bool buffer_migrate_lock_buffers(struct buffer_head *head,
-- 
1.8.1.2

[PATCH 80/93] ceph: fix statvfs fr_size

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sage Weil <sage@inktank.com>

commit 92a49fb0f79f3300e6e50ddf56238e70678e4202 upstream.

Different versions of glibc are broken in different ways, but the short of
it is that for the time being, frsize should == bsize, and be used as the
multiple for the blocks, free, and available fields.  This mirrors what is
done for NFS.  The previous reporting of the page size for frsize meant
that newer glibc and df would report a very small value for the fs size.

Fixes http://tracker.ceph.com/issues/3793.

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/ceph/super.c | 7 ++++++-
 fs/ceph/super.h | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 1e67dd7..a7a70ee 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -70,8 +70,14 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
 	/*
 	 * express utilization in terms of large blocks to avoid
 	 * overflow on 32-bit machines.
+	 *
+	 * NOTE: for the time being, we make bsize == frsize to humor
+	 * not-yet-ancient versions of glibc that are broken.
+	 * Someday, we will probably want to report a real block
+	 * size...  whatever that may mean for a network file system!
 	 */
 	buf->f_bsize = 1 << CEPH_BLOCK_SHIFT;
+	buf->f_frsize = 1 << CEPH_BLOCK_SHIFT;
 	buf->f_blocks = le64_to_cpu(st.kb) >> (CEPH_BLOCK_SHIFT-10);
 	buf->f_bfree = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
 	buf->f_bavail = le64_to_cpu(st.kb_avail) >> (CEPH_BLOCK_SHIFT-10);
@@ -79,7 +85,6 @@ static int ceph_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_files = le64_to_cpu(st.num_objects);
 	buf->f_ffree = -1;
 	buf->f_namelen = NAME_MAX;
-	buf->f_frsize = PAGE_CACHE_SIZE;
 
 	/* leave fsid little-endian, regardless of host endianness */
 	fsid = *(u64 *)(&monmap->fsid) ^ *((u64 *)&monmap->fsid + 1);
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 1b85b76..d2e01a6 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -21,7 +21,7 @@
 
 /* large granularity for statfs utilization stats to facilitate
  * large volume sizes on 32-bit machines. */
-#define CEPH_BLOCK_SHIFT   20  /* 1 MB */
+#define CEPH_BLOCK_SHIFT   22  /* 4 MB */
 #define CEPH_BLOCK         (1 << CEPH_BLOCK_SHIFT)
 
 #define CEPH_MOUNT_OPT_DIRSTAT         (1<<4) /* `cat dirname` for stats */
-- 
1.8.1.2

[PATCH 81/93] x86: Fix typo in kexec register clearing

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit c8a22d19dd238ede87aa0ac4f7dbea8da039b9c1 upstream.

Fixes a typo in register clearing code. Thanks to PaX Team for fixing
this originally, and James Troup for pointing it out.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20130605184718.GA8396@www.outflux.net
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/x86/kernel/relocate_kernel_64.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index 7a6f3b3..f2bb9c9 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -160,7 +160,7 @@ identity_mapped:
 	xorq    %rbp, %rbp
 	xorq	%r8,  %r8
 	xorq	%r9,  %r9
-	xorq	%r10, %r9
+	xorq	%r10, %r10
 	xorq	%r11, %r11
 	xorq	%r12, %r12
 	xorq	%r13, %r13
-- 
1.8.1.2

[PATCH 82/93] md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it.

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Lyakas <alex@zadarastorage.com>

commit 3056e3aec8d8ba61a0710fb78b2d562600aa2ea7 upstream.

Without that fix, the following scenario could happen:

- RAID1 with drives A and B; drive B was freshly-added and is rebuilding
- Drive A fails
- WRITE request arrives to the array. It is failed by drive A, so
r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B
succeeds in writing it, so the same r1_bio is marked as
R1BIO_Uptodate.
- r1_bio arrives to handle_write_finished, badblocks are disabled,
md_error()->error() does nothing because we don't fail the last drive
of raid1
- raid_end_bio_io()  calls call_bio_endio()
- As a result, in call_bio_endio():
        if (!test_bit(R1BIO_Uptodate, &r1_bio->state))
                clear_bit(BIO_UPTODATE, &bio->bi_flags);
this code doesn't clear the BIO_UPTODATE flag, and the whole master
WRITE succeeds, back to the upper layer.

So we returned success to the upper layer, even though we had written
the data onto the rebuilding drive only. But when we want to read the
data back, we would not read from the rebuilding drive, so this data
is lost.

[neilb - applied identical change to raid10 as well]

This bug can result in lost data, so it is suitable for any
-stable kernel.

Signed-off-by: Alex Lyakas <alex@zadarastorage.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/md/raid1.c  | 12 +++++++++++-
 drivers/md/raid10.c | 12 +++++++++++-
 2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index cb781a1..adba2e7 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -413,7 +413,17 @@ static void raid1_end_write_request(struct bio *bio, int error)
 
 		r1_bio->bios[mirror] = NULL;
 		to_put = bio;
-		set_bit(R1BIO_Uptodate, &r1_bio->state);
+		/*
+		 * Do not set R1BIO_Uptodate if the current device is
+		 * rebuilding or Faulty. This is because we cannot use
+		 * such device for properly reading the data back (we could
+		 * potentially use it, if the current write would have felt
+		 * before rdev->recovery_offset, but for simplicity we don't
+		 * check this here.
+		 */
+		if (test_bit(In_sync, &conf->mirrors[mirror].rdev->flags) &&
+		    !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags))
+			set_bit(R1BIO_Uptodate, &r1_bio->state);
 
 		/* Maybe we can clear some bad blocks. */
 		if (is_badblock(conf->mirrors[mirror].rdev,
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index e97d046..9dd81d9 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -461,7 +461,17 @@ static void raid10_end_write_request(struct bio *bio, int error)
 		sector_t first_bad;
 		int bad_sectors;
 
-		set_bit(R10BIO_Uptodate, &r10_bio->state);
+		/*
+		 * Do not set R10BIO_Uptodate if the current device is
+		 * rebuilding or Faulty. This is because we cannot use
+		 * such device for properly reading the data back (we could
+		 * potentially use it, if the current write would have felt
+		 * before rdev->recovery_offset, but for simplicity we don't
+		 * check this here.
+		 */
+		if (test_bit(In_sync, &rdev->flags) &&
+		    !test_bit(Faulty, &rdev->flags))
+			set_bit(R10BIO_Uptodate, &r10_bio->state);
 
 		/* Maybe we can clear some bad blocks. */
 		if (is_badblock(rdev,
-- 
1.8.1.2

[PATCH 83/93] md/raid1,raid10: use freeze_array in place of raise_barrier in various places.

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.de>

commit e2d59925221cd562e07fee38ec8839f7209ae603 upstream.

Various places in raid1 and raid10 are calling raise_barrier when they
really should call freeze_array.
The former is only intended to be called from "make_request".
The later has extra checks for 'nr_queued' and makes a call to
flush_pending_writes(), so it is safe to call it from within the
management thread.

Using raise_barrier will sometimes deadlock.  Using freeze_array
should not.

As 'freeze_array' currently expects one request to be pending (in
handle_read_error - the only previous caller), we need to pass
it the number of pending requests (extra) to ignore.

The deadlock was made particularly noticeable by commits
050b66152f87c7 (raid10) and 6b740b8d79252f13 (raid1) which
appeared in 3.4, so the fix is appropriate for any -stable
kernel since then.

This patch probably won't apply directly to some early kernels and
will need to be applied by hand.

Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/md/raid1.c  | 22 +++++++++++-----------
 drivers/md/raid10.c | 14 +++++++-------
 2 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index adba2e7..aa58c02 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -812,17 +812,17 @@ static void allow_barrier(struct r1conf *conf)
 	wake_up(&conf->wait_barrier);
 }
 
-static void freeze_array(struct r1conf *conf)
+static void freeze_array(struct r1conf *conf, int extra)
 {
 	/* stop syncio and normal IO and wait for everything to
 	 * go quite.
 	 * We increment barrier and nr_waiting, and then
-	 * wait until nr_pending match nr_queued+1
+	 * wait until nr_pending match nr_queued+extra
 	 * This is called in the context of one normal IO request
 	 * that has failed. Thus any sync request that might be pending
 	 * will be blocked by nr_pending, and we need to wait for
 	 * pending IO requests to complete or be queued for re-try.
-	 * Thus the number queued (nr_queued) plus this request (1)
+	 * Thus the number queued (nr_queued) plus this request (extra)
 	 * must match the number of pending IOs (nr_pending) before
 	 * we continue.
 	 */
@@ -830,7 +830,7 @@ static void freeze_array(struct r1conf *conf)
 	conf->barrier++;
 	conf->nr_waiting++;
 	wait_event_lock_irq(conf->wait_barrier,
-			    conf->nr_pending == conf->nr_queued+1,
+			    conf->nr_pending == conf->nr_queued+extra,
 			    conf->resync_lock,
 			    flush_pending_writes(conf));
 	spin_unlock_irq(&conf->resync_lock);
@@ -1429,8 +1429,8 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 		 * we wait for all outstanding requests to complete.
 		 */
 		synchronize_sched();
-		raise_barrier(conf);
-		lower_barrier(conf);
+		freeze_array(conf, 0);
+		unfreeze_array(conf);
 		clear_bit(Unmerged, &rdev->flags);
 	}
 	md_integrity_add_rdev(rdev, mddev);
@@ -1478,11 +1478,11 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 			 */
 			struct md_rdev *repl =
 				conf->mirrors[conf->raid_disks + number].rdev;
-			raise_barrier(conf);
+			freeze_array(conf, 0);
 			clear_bit(Replacement, &repl->flags);
 			p->rdev = repl;
 			conf->mirrors[conf->raid_disks + number].rdev = NULL;
-			lower_barrier(conf);
+			unfreeze_array(conf);
 			clear_bit(WantReplacement, &rdev->flags);
 		} else
 			clear_bit(WantReplacement, &rdev->flags);
@@ -2099,7 +2099,7 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio)
 	 * frozen
 	 */
 	if (mddev->ro == 0) {
-		freeze_array(conf);
+		freeze_array(conf, 1);
 		fix_read_error(conf, r1_bio->read_disk,
 			       r1_bio->sector, r1_bio->sectors);
 		unfreeze_array(conf);
@@ -2862,7 +2862,7 @@ static int raid1_reshape(struct mddev *mddev)
 		return -ENOMEM;
 	}
 
-	raise_barrier(conf);
+	freeze_array(conf, 0);
 
 	/* ok, everything is stopped */
 	oldpool = conf->r1bio_pool;
@@ -2894,7 +2894,7 @@ static int raid1_reshape(struct mddev *mddev)
 	mddev->delta_disks = 0;
 
 	conf->last_used = 0; /* just make sure it is in-range */
-	lower_barrier(conf);
+	unfreeze_array(conf);
 
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	md_wakeup_thread(mddev->thread);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 9dd81d9..e76227e 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -995,17 +995,17 @@ static void allow_barrier(struct r10conf *conf)
 	wake_up(&conf->wait_barrier);
 }
 
-static void freeze_array(struct r10conf *conf)
+static void freeze_array(struct r10conf *conf, int extra)
 {
 	/* stop syncio and normal IO and wait for everything to
 	 * go quiet.
 	 * We increment barrier and nr_waiting, and then
-	 * wait until nr_pending match nr_queued+1
+	 * wait until nr_pending match nr_queued+extra
 	 * This is called in the context of one normal IO request
 	 * that has failed. Thus any sync request that might be pending
 	 * will be blocked by nr_pending, and we need to wait for
 	 * pending IO requests to complete or be queued for re-try.
-	 * Thus the number queued (nr_queued) plus this request (1)
+	 * Thus the number queued (nr_queued) plus this request (extra)
 	 * must match the number of pending IOs (nr_pending) before
 	 * we continue.
 	 */
@@ -1013,7 +1013,7 @@ static void freeze_array(struct r10conf *conf)
 	conf->barrier++;
 	conf->nr_waiting++;
 	wait_event_lock_irq(conf->wait_barrier,
-			    conf->nr_pending == conf->nr_queued+1,
+			    conf->nr_pending == conf->nr_queued+extra,
 			    conf->resync_lock,
 			    flush_pending_writes(conf));
 
@@ -1715,8 +1715,8 @@ static int raid10_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 		 * we wait for all outstanding requests to complete.
 		 */
 		synchronize_sched();
-		raise_barrier(conf, 0);
-		lower_barrier(conf);
+		freeze_array(conf, 0);
+		unfreeze_array(conf);
 		clear_bit(Unmerged, &rdev->flags);
 	}
 	md_integrity_add_rdev(rdev, mddev);
@@ -2509,7 +2509,7 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio)
 	r10_bio->devs[slot].bio = NULL;
 
 	if (mddev->ro == 0) {
-		freeze_array(conf);
+		freeze_array(conf, 1);
 		fix_read_error(conf, mddev, r10_bio);
 		unfreeze_array(conf);
 	} else
-- 
1.8.1.2

[PATCH 84/93] USB: spcp8x5: fix device initialisation at open

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 5e4211f1c47560c36a8b3d4544dfd866dcf7ccd0 upstream.

Do not use uninitialised termios data to determine when to configure the
device at open.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ luis: backported to 3.5:
  - adjusted context
  - termios is a pointer, not a struct ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/spcp8x5.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 66a4871..10760f2 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -329,7 +329,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int cflag = tty->termios->c_cflag;
-	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned short uartdata;
 	unsigned char buf[2] = {0, 0};
 	int baud;
@@ -338,15 +337,15 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 
 
 	/* check that they really want us to change something */
-	if (!tty_termios_hw_change(tty->termios, old_termios))
+	if (old_termios && !tty_termios_hw_change(tty->termios, old_termios))
 		return;
 
 	/* set DTR/RTS active */
 	spin_lock_irqsave(&priv->lock, flags);
 	control = priv->line_control;
-	if ((old_cflag & CBAUD) == B0) {
+	if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
 		priv->line_control |= MCR_DTR;
-		if (!(old_cflag & CRTSCTS))
+		if (!(old_termios->c_cflag & CRTSCTS))
 			priv->line_control |= MCR_RTS;
 	}
 	if (control != priv->line_control) {
@@ -436,7 +435,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
  * status of the device. */
 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	int ret;
@@ -457,7 +455,7 @@ static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* Setup termios */
 	if (tty)
-		spcp8x5_set_termios(tty, port, &tmp_termios);
+		spcp8x5_set_termios(tty, port, NULL);
 
 	spcp8x5_get_msr(serial->dev, &status, priv->type);
 
-- 
1.8.1.2

[PATCH 85/93] USB: pl2303: fix device initialisation at open

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 2d8f4447b58bba5f8cb895c07690434c02307eaf upstream.

Do not use uninitialised termios data to determine when to configure the
device at open.

This also prevents stack data from leaking to userspace in the OOM error
path.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ luis: backported to 3.5:
  - adjusted context
  - termios is a pointer, not a struct ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/usb/serial/pl2303.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 6fe8d0e..5150a27 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -258,7 +258,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */
 
-	if (!tty_termios_hw_change(tty->termios, old_termios))
+	if (old_termios && !tty_termios_hw_change(tty->termios, old_termios))
 		return;
 
 	cflag = tty->termios->c_cflag;
@@ -267,7 +267,8 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	if (!buf) {
 		dev_err(&port->dev, "%s - out of memory.\n", __func__);
 		/* Report back no change occurred */
-		*tty->termios = *old_termios;
+		if (old_termios)
+			*tty->termios = *old_termios;
 		return;
 	}
 
@@ -407,7 +408,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	control = priv->line_control;
 	if ((cflag & CBAUD) == B0)
 		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-	else if ((old_termios->c_cflag & CBAUD) == B0)
+	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
 		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 	if (control != priv->line_control) {
 		control = priv->line_control;
@@ -466,7 +467,6 @@ static void pl2303_close(struct usb_serial_port *port)
 
 static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
-	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	int result;
@@ -482,7 +482,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* Setup termios */
 	if (tty)
-		pl2303_set_termios(tty, port, &tmp_termios);
+		pl2303_set_termios(tty, port, NULL);
 
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
-- 
1.8.1.2

[PATCH 86/93] tg3: Wait for boot code to finish after power on

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nithin Sujir <nsujir@broadcom.com>

commit df465abfe06f7dc4f33f4a96d17f096e9e8ac917 upstream.

Some systems that don't need wake-on-lan may choose to power down the
chip on system standby. Upon resume, the power on causes the boot code
to startup and initialize the hardware. On one new platform, this is
causing the device to go into a bad state due to a race between the
driver and boot code, once every several hundred resumes. The same race
exists on open since we come up from a power on.

This patch adds a wait for boot code signature at the beginning of
tg3_init_hw() which is common to both cases. If there has not been a
power-off or the boot code has already completed, the signature will be
present and poll_fw() returns immediately. Also return immediately if
the device does not have firmware.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/ethernet/broadcom/tg3.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 4cb0916..8a0b948 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -1631,6 +1631,9 @@ static int tg3_poll_fw(struct tg3 *tp)
 	int i;
 	u32 val;
 
+	if (tg3_flag(tp, NO_FWARE_REPORTED))
+		return 0;
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
 		/* Wait up to 20ms for init done. */
 		for (i = 0; i < 200; i++) {
@@ -9451,6 +9454,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
  */
 static int tg3_init_hw(struct tg3 *tp, int reset_phy)
 {
+	/* Chip may have been just powered on. If so, the boot code may still
+	 * be running initialization. Wait for it to finish to avoid races in
+	 * accessing the hardware.
+	 */
+	tg3_enable_register_access(tp);
+	tg3_poll_fw(tp);
+
 	tg3_switch_clocks(tp);
 
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
-- 
1.8.1.2

[PATCH 87/93] powerpc: Fix stack overflow crash in resume_kernel when ftracing

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ellerman <michael@ellerman.id.au>

commit 0e37739b1c96d65e6433998454985de994383019 upstream.

It's possible for us to crash when running with ftrace enabled, eg:

  Bad kernel stack pointer bffffd12 at c00000000000a454
  cpu 0x3: Vector: 300 (Data Access) at [c00000000ffe3d40]
      pc: c00000000000a454: resume_kernel+0x34/0x60
      lr: c00000000000335c: performance_monitor_common+0x15c/0x180
      sp: bffffd12
     msr: 8000000000001032
     dar: bffffd12
   dsisr: 42000000

If we look at current's stack (paca->__current->stack) we see it is
equal to c0000002ecab0000. Our stack is 16K, and comparing to
paca->kstack (c0000002ecab3e30) we can see that we have overflowed our
kernel stack. This leads to us writing over our struct thread_info, and
in this case we have corrupted thread_info->flags and set
_TIF_EMULATE_STACK_STORE.

Dumping the stack we see:

  3:mon> t c0000002ecab0000
  [c0000002ecab0000] c00000000002131c .performance_monitor_exception+0x5c/0x70
  [c0000002ecab0080] c00000000000335c performance_monitor_common+0x15c/0x180
  --- Exception: f01 (Performance Monitor) at c0000000000fb2ec .trace_hardirqs_off+0x1c/0x30
  [c0000002ecab0370] c00000000016fdb0 .trace_graph_entry+0xb0/0x280 (unreliable)
  [c0000002ecab0410] c00000000003d038 .prepare_ftrace_return+0x98/0x130
  [c0000002ecab04b0] c00000000000a920 .ftrace_graph_caller+0x14/0x28
  [c0000002ecab0520] c0000000000d6b58 .idle_cpu+0x18/0x90
  [c0000002ecab05a0] c00000000000a934 .return_to_handler+0x0/0x34
  [c0000002ecab0620] c00000000001e660 .timer_interrupt+0x160/0x300
  [c0000002ecab06d0] c0000000000025dc decrementer_common+0x15c/0x180
  --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0
  [c0000002ecab09c0] c0000000000fe044 .trace_hardirqs_on+0x14/0x30 (unreliable)
  [c0000002ecab0fb0] c00000000016fe3c .trace_graph_entry+0x13c/0x280
  [c0000002ecab1050] c00000000003d038 .prepare_ftrace_return+0x98/0x130
  [c0000002ecab10f0] c00000000000a920 .ftrace_graph_caller+0x14/0x28
  [c0000002ecab1160] c0000000000161f0 .__ppc64_runlatch_on+0x10/0x40
  [c0000002ecab11d0] c00000000000a934 .return_to_handler+0x0/0x34
  --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0

  ... and so on

__ppc64_runlatch_on() is called from RUNLATCH_ON in the exception entry
path. At that point the irq state is not consistent, ie. interrupts are
hard disabled (by the exception entry), but the paca soft-enabled flag
may be out of sync.

This leads to the local_irq_restore() in trace_graph_entry() actually
enabling interrupts, which we do not want. Because we have not yet
reprogrammed the decrementer we immediately take another decrementer
exception, and recurse.

The fix is twofold. Firstly make sure we call DISABLE_INTS before
calling RUNLATCH_ON. The badly named DISABLE_INTS actually reconciles
the irq state in the paca with the hardware, making it safe again to
call local_irq_save/restore().

Although that should be sufficient to fix the bug, we also mark the
runlatch routines as notrace. They are called very early in the
exception entry and we are asking for trouble tracing them. They are
also fairly uninteresting and tracing them just adds unnecessary
overhead.

[ This regression was introduced by fe1952fc0afb9a2e4c79f103c08aef5d13db1873
  "powerpc: Rework runlatch code" by myself --BenH
]

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/powerpc/include/asm/exception-64s.h | 2 +-
 arch/powerpc/kernel/process.c            | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index d58fc4e..6afb13a 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -320,7 +320,7 @@ label##_common:							\
  */
 #define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr)		  \
 	EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \
-			 FINISH_NAP;RUNLATCH_ON;DISABLE_INTS)
+			 FINISH_NAP;DISABLE_INTS;RUNLATCH_ON)
 
 /*
  * When the idle code in power4_idle puts the CPU into NAP mode,
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 1a1f2dd..b1e4ac1 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1221,7 +1221,7 @@ EXPORT_SYMBOL(dump_stack);
 
 #ifdef CONFIG_PPC64
 /* Called with hard IRQs off */
-void __ppc64_runlatch_on(void)
+void notrace __ppc64_runlatch_on(void)
 {
 	struct thread_info *ti = current_thread_info();
 	unsigned long ctrl;
@@ -1234,7 +1234,7 @@ void __ppc64_runlatch_on(void)
 }
 
 /* Called with hard IRQs off */
-void __ppc64_runlatch_off(void)
+void notrace __ppc64_runlatch_off(void)
 {
 	struct thread_info *ti = current_thread_info();
 	unsigned long ctrl;
-- 
1.8.1.2

[PATCH 88/93] powerpc: Fix emulation of illegal instructions on PowerNV platform

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@samba.org>

commit bf593907f7236e95698a76b7c7a2bbf8b1165327 upstream.

Normally, the kernel emulates a few instructions that are unimplemented
on some processors (e.g. the old dcba instruction), or privileged (e.g.
mfpvr).  The emulation of unimplemented instructions is currently not
working on the PowerNV platform.  The reason is that on these machines,
unimplemented and illegal instructions cause a hypervisor emulation
assist interrupt, rather than a program interrupt as on older CPUs.
Our vector for the emulation assist interrupt just calls
program_check_exception() directly, without setting the bit in SRR1
that indicates an illegal instruction interrupt.  This fixes it by
making the emulation assist interrupt set that bit before calling
program_check_interrupt().  With this, old programs that use no-longer
implemented instructions such as dcba now work again.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/powerpc/kernel/exceptions-64s.S |  2 +-
 arch/powerpc/kernel/traps.c          | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 1c06d29..f9d4812 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -489,7 +489,7 @@ machine_check_common:
 	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
 	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
-        STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
+	STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt)
         STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
 	STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
 	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 3bb7197..5557044 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1074,6 +1074,16 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
 }
 
+/*
+ * This occurs when running in hypervisor mode on POWER6 or later
+ * and an illegal instruction is encountered.
+ */
+void __kprobes emulation_assist_interrupt(struct pt_regs *regs)
+{
+	regs->msr |= REASON_ILLEGAL;
+	program_check_exception(regs);
+}
+
 void alignment_exception(struct pt_regs *regs)
 {
 	int sig, code, fixed = 0;
-- 
1.8.1.2

[PATCH 89/93] powerpc: Fix missing/delayed calls to irq_work

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

commit 230b3034793247f61e6a0b08c44cf415f6d92981 upstream.

When replaying interrupts (as a result of the interrupt occurring
while soft-disabled), in the case of the decrementer, we are exclusively
testing for a pending timer target. However we also use decrementer
interrupts to trigger the new "irq_work", which in this case would
be missed.

This change the logic to force a replay in both cases of a timer
boundary reached and a decrementer interrupt having actually occurred
while disabled. The former test is still useful to catch cases where
a CPU having been hard-disabled for a long time completely misses the
interrupt due to a decrementer rollover.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 arch/powerpc/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 1f017bb..86cb68e 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -162,7 +162,7 @@ notrace unsigned int __check_irq_replay(void)
 	 * in case we also had a rollover while hard disabled
 	 */
 	local_paca->irq_happened &= ~PACA_IRQ_DEC;
-	if (decrementer_check_overflow())
+	if ((happened & PACA_IRQ_DEC) || decrementer_check_overflow())
 		return 0x900;
 
 	/* Finally check if an external interrupt happened */
-- 
1.8.1.2

[PATCH 90/93] audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <oleg@redhat.com>

commit f000cfdde5de4fc15dead5ccf524359c07eadf2b upstream.

audit_log_start() does wait_for_auditd() in a loop until
audit_backlog_wait_time passes or audit_skb_queue has a room.

If signal_pending() is true this becomes a busy-wait loop, schedule() in
TASK_INTERRUPTIBLE won't block.

Thanks to Guy for fully investigating and explaining the problem.

(akpm: that'll cause the system to lock up on a non-preemptible
uniprocessor kernel)

(Guy: "Our customer was in fact running a uniprocessor machine, and they
reported a system hang.")

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Guy Streeter <streeter@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ luis: backported to 3.5: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 kernel/audit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/audit.c b/kernel/audit.c
index 1c7f2c6..5917dfe 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -1167,7 +1167,7 @@ struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask,
 
 			/* Wait for auditd to drain the queue a little */
 			DECLARE_WAITQUEUE(wait, current);
-			set_current_state(TASK_INTERRUPTIBLE);
+			set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&audit_backlog_wait, &wait);
 
 			if (audit_backlog_limit &&
-- 
1.8.1.2

[PATCH 91/93] xen-netfront: reduce gso_max_size to account for max TCP header

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Liu <wei.liu2@citrix.com>

commit 9ecd1a75d977e2e8c48139c7d3efed183f898d94 upstream.

The maximum packet including header that can be handled by netfront / netback
wire format is 65535. Reduce gso_max_size accordingly.

Drop skb and print warning when skb->len > 65535. This can 1) save the effort
to send malformed packet to netback, 2) help spotting misconfiguration of
netfront in the future.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ luis: backported to 3.5: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 drivers/net/xen-netfront.c       | 17 +++++++++++++++--
 include/xen/interface/io/netif.h |  1 +
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 526702d..b88afc7 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -36,7 +36,7 @@
 #include <linux/skbuff.h>
 #include <linux/ethtool.h>
 #include <linux/if_ether.h>
-#include <linux/tcp.h>
+#include <net/tcp.h>
 #include <linux/udp.h>
 #include <linux/moduleparam.h>
 #include <linux/mm.h>
@@ -491,6 +491,16 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	unsigned int len = skb_headlen(skb);
 	unsigned long flags;
 
+	/* If skb->len is too big for wire format, drop skb and alert
+	 * user about misconfiguration.
+	 */
+	if (unlikely(skb->len > XEN_NETIF_MAX_TX_SIZE)) {
+		net_alert_ratelimited(
+			"xennet: skb->len = %u, too big for wire format\n",
+			skb->len);
+		goto drop;
+	}
+
 	frags += DIV_ROUND_UP(offset + len, PAGE_SIZE);
 	if (unlikely(frags > MAX_SKB_FRAGS + 1)) {
 		printk(KERN_ALERT "xennet: skb rides the rocket: %d frags\n",
@@ -1039,7 +1049,8 @@ err:
 
 static int xennet_change_mtu(struct net_device *dev, int mtu)
 {
-	int max = xennet_can_sg(dev) ? 65535 - ETH_HLEN : ETH_DATA_LEN;
+	int max = xennet_can_sg(dev) ?
+		XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER : ETH_DATA_LEN;
 
 	if (mtu > max)
 		return -EINVAL;
@@ -1343,6 +1354,8 @@ static struct net_device * __devinit xennet_create_dev(struct xenbus_device *dev
 	SET_ETHTOOL_OPS(netdev, &xennet_ethtool_ops);
 	SET_NETDEV_DEV(netdev, &dev->dev);
 
+	netif_set_gso_max_size(netdev, XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER);
+
 	np->netdev = netdev;
 
 	netif_carrier_off(netdev);
diff --git a/include/xen/interface/io/netif.h b/include/xen/interface/io/netif.h
index a36c87a..d4635cd 100644
--- a/include/xen/interface/io/netif.h
+++ b/include/xen/interface/io/netif.h
@@ -65,6 +65,7 @@
 #define _XEN_NETTXF_extra_info		(3)
 #define  XEN_NETTXF_extra_info		(1U<<_XEN_NETTXF_extra_info)
 
+#define XEN_NETIF_MAX_TX_SIZE 0xFFFF
 struct xen_netif_tx_request {
     grant_ref_t gref;      /* Reference to buffer page */
     uint16_t offset;       /* Offset within buffer page */
-- 
1.8.1.2

[PATCH 92/93] ext4: lock i_mutex when truncating orphan inodes

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit 721e3eba21e43532e438652dd8f1fcdfce3187e7 upstream.

Commit c278531d39 added a warning when ext4_flush_unwritten_io() is
called without i_mutex being taken.  It had previously not been taken
during orphan cleanup since races weren't possible at that point in
the mount process, but as a result of this c278531d39, we will now see
a kernel WARN_ON in this case.  Take the i_mutex in
ext4_orphan_cleanup() to suppress this warning.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 fs/ext4/super.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index df4b8db..89abdd7 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -2208,7 +2208,9 @@ static void ext4_orphan_cleanup(struct super_block *sb,
 				__func__, inode->i_ino, inode->i_size);
 			jbd_debug(2, "truncating inode %lu to %lld bytes\n",
 				  inode->i_ino, inode->i_size);
+			mutex_lock(&inode->i_mutex);
 			ext4_truncate(inode);
+			mutex_unlock(&inode->i_mutex);
 			nr_truncates++;
 		} else {
 			ext4_msg(sb, KERN_DEBUG,
-- 
1.8.1.2

[PATCH 93/93] snd_pcm_link(): fix a leak...

[Luis Henriques]

3.5.7.15 -stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit dd6c5cd8fedddc9605209098e2fa4e82c7af22aa upstream.

in case when snd_pcm_stream_linked(substream) is true, we end up leaking
group.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 sound/core/pcm_native.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 7203c9a..ffb9153 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1633,6 +1633,7 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd)
 	}
 	if (!snd_pcm_stream_linked(substream)) {
 		substream->group = group;
+		group = NULL;
 		spin_lock_init(&substream->group->lock);
 		INIT_LIST_HEAD(&substream->group->substreams);
 		list_add_tail(&substream->link_list, &substream->group->substreams);
@@ -1647,8 +1648,7 @@ static int snd_pcm_link(struct snd_pcm_substream *substream, int fd)
  _nolock:
 	snd_card_unref(substream1->pcm->card);
 	fput(file);
-	if (res < 0)
-		kfree(group);
+	kfree(group);
 	return res;
 }
 
-- 
1.8.1.2