All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v4 0/5] Generic PHY driver for the Exynos SoC MIPI CSI-2/DSI DPHYs
@ 2013-06-28 13:43 ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel, linux-samsung-soc
  Cc: kishon, linux-media, kyungmin.park, balbi, t.figa,
	devicetree-discuss, kgene.kim, dh09.lee, jg1.han, inki.dae,
	tomi.valkeinen, plagnioj, jason77.wang, linux-fbdev,
	Sylwester Nawrocki

This patch series adds a simple driver for the Samsung S5P/Exynos SoC
series MIPI CSI-2 receiver (MIPI CSIS) and MIPI DSI transmitter (MIPI
DSIM) DPHYs, using the generic PHY framework [1]. Previously the MIPI
CSIS and MIPI DSIM used a platform callback to control the PHY power
enable and reset bits. The platform callback can now be dropped and
those drivers don't need any calls back to the platform code, which
makes migration to the device tree complete for MIPI CSIS.

Changes since v3 (only patch 1/5):
 - replaced spin_(un)lock_irq_{save,restore} with spin_{lock,unlock}.
 - DT binding file renamed to samsung-phy.txt, so it can be used for
   other PHYs as well,
 - removed <linux/delay.h> inclusion,
 - added missing spin_lock_init().

Changes since v2:
 - adapted to the generic PHY API v9: use phy_set/get_drvdata(),
 - fixed of_xlate callback to return ERR_PTR() instead of NULL,
 - namespace cleanup, put "GPL v2" as MODULE_LICENSE, removed pr_debug,
 - removed phy id check in __set_phy_state().

Patches 2...3/5 are unchanged, description of patch 5/5 has been
updated.

Changes since v1:
 - enabled build as module and with CONFIG_OF disabled,
 - added phy_id enum,
 - of_address_to_resource() replaced with platform_get_resource(),
 - adapted to changes in the PHY API v7, v8 - added phy labels,
 - added MODULE_DEVICE_TABLE() entry,
 - the driver file renamed to phy-exynos-mipi-video.c,
 - changed DT compatible string to "samsung,s5pv210-mipi-video-phy",
 - corrected the compatible property's description.
 - patch 3/5 "video: exynos_dsi: Use generic PHY driver" replaced
   with a patch modifying the MIPI DSIM driver which is currently
   in mainline.

This series depends on the generic PHY framework [1]. It can be browsed at:
 http://git.linuxtv.org/snawrocki/samsung.git/exynos-mipi-phy
This branch is based on the 'for-next' branch from:
 git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
and the patch series:
 http://www.spinics.net/lists/arm-kernel/msg254667.html

[1] https://lkml.org/lkml/2013/6/26/259

Sylwester Nawrocki (5):
  ARM: dts: Add MIPI PHY node to exynos4.dtsi
  phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
  video: exynos_mipi_dsim: Use the generic PHY driver
  [media] exynos4-is: Use the generic MIPI CSIS PHY driver
  ARM: Samsung: Remove the MIPI PHY setup code

 .../devicetree/bindings/phy/samsung-phy.txt        |   14 ++
 arch/arm/boot/dts/exynos4.dtsi                     |   10 ++
 arch/arm/mach-exynos/include/mach/regs-pmu.h       |    5 -
 arch/arm/mach-s5pv210/include/mach/regs-clock.h    |    4 -
 arch/arm/plat-samsung/Kconfig                      |    5 -
 arch/arm/plat-samsung/Makefile                     |    1 -
 arch/arm/plat-samsung/setup-mipiphy.c              |   60 -------
 drivers/media/platform/exynos4-is/mipi-csis.c      |   16 +-
 drivers/phy/Kconfig                                |    9 ++
 drivers/phy/Makefile                               |    3 +-
 drivers/phy/phy-exynos-mipi-video.c                |  169 ++++++++++++++++++++
 drivers/video/exynos/exynos_mipi_dsi.c             |   19 +--
 include/linux/platform_data/mipi-csis.h            |   11 +-
 include/video/exynos_mipi_dsim.h                   |    6 +-
 14 files changed, 233 insertions(+), 99 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt
 delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c
 create mode 100644 drivers/phy/phy-exynos-mipi-video.c

--
1.7.9.5

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v4 0/5] Generic PHY driver for the Exynos SoC MIPI CSI-2/DSI DPHYs
@ 2013-06-28 13:43 ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

This patch series adds a simple driver for the Samsung S5P/Exynos SoC
series MIPI CSI-2 receiver (MIPI CSIS) and MIPI DSI transmitter (MIPI
DSIM) DPHYs, using the generic PHY framework [1]. Previously the MIPI
CSIS and MIPI DSIM used a platform callback to control the PHY power
enable and reset bits. The platform callback can now be dropped and
those drivers don't need any calls back to the platform code, which
makes migration to the device tree complete for MIPI CSIS.

Changes since v3 (only patch 1/5):
 - replaced spin_(un)lock_irq_{save,restore} with spin_{lock,unlock}.
 - DT binding file renamed to samsung-phy.txt, so it can be used for
   other PHYs as well,
 - removed <linux/delay.h> inclusion,
 - added missing spin_lock_init().

Changes since v2:
 - adapted to the generic PHY API v9: use phy_set/get_drvdata(),
 - fixed of_xlate callback to return ERR_PTR() instead of NULL,
 - namespace cleanup, put "GPL v2" as MODULE_LICENSE, removed pr_debug,
 - removed phy id check in __set_phy_state().

Patches 2...3/5 are unchanged, description of patch 5/5 has been
updated.

Changes since v1:
 - enabled build as module and with CONFIG_OF disabled,
 - added phy_id enum,
 - of_address_to_resource() replaced with platform_get_resource(),
 - adapted to changes in the PHY API v7, v8 - added phy labels,
 - added MODULE_DEVICE_TABLE() entry,
 - the driver file renamed to phy-exynos-mipi-video.c,
 - changed DT compatible string to "samsung,s5pv210-mipi-video-phy",
 - corrected the compatible property's description.
 - patch 3/5 "video: exynos_dsi: Use generic PHY driver" replaced
   with a patch modifying the MIPI DSIM driver which is currently
   in mainline.

This series depends on the generic PHY framework [1]. It can be browsed at:
 http://git.linuxtv.org/snawrocki/samsung.git/exynos-mipi-phy
This branch is based on the 'for-next' branch from:
 git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
and the patch series:
 http://www.spinics.net/lists/arm-kernel/msg254667.html

[1] https://lkml.org/lkml/2013/6/26/259

Sylwester Nawrocki (5):
  ARM: dts: Add MIPI PHY node to exynos4.dtsi
  phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
  video: exynos_mipi_dsim: Use the generic PHY driver
  [media] exynos4-is: Use the generic MIPI CSIS PHY driver
  ARM: Samsung: Remove the MIPI PHY setup code

 .../devicetree/bindings/phy/samsung-phy.txt        |   14 ++
 arch/arm/boot/dts/exynos4.dtsi                     |   10 ++
 arch/arm/mach-exynos/include/mach/regs-pmu.h       |    5 -
 arch/arm/mach-s5pv210/include/mach/regs-clock.h    |    4 -
 arch/arm/plat-samsung/Kconfig                      |    5 -
 arch/arm/plat-samsung/Makefile                     |    1 -
 arch/arm/plat-samsung/setup-mipiphy.c              |   60 -------
 drivers/media/platform/exynos4-is/mipi-csis.c      |   16 +-
 drivers/phy/Kconfig                                |    9 ++
 drivers/phy/Makefile                               |    3 +-
 drivers/phy/phy-exynos-mipi-video.c                |  169 ++++++++++++++++++++
 drivers/video/exynos/exynos_mipi_dsi.c             |   19 +--
 include/linux/platform_data/mipi-csis.h            |   11 +-
 include/video/exynos_mipi_dsim.h                   |    6 +-
 14 files changed, 233 insertions(+), 99 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt
 delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c
 create mode 100644 drivers/phy/phy-exynos-mipi-video.c

--
1.7.9.5


^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v4 0/5] Generic PHY driver for the Exynos SoC MIPI CSI-2/DSI DPHYs
@ 2013-06-28 13:43 ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

This patch series adds a simple driver for the Samsung S5P/Exynos SoC
series MIPI CSI-2 receiver (MIPI CSIS) and MIPI DSI transmitter (MIPI
DSIM) DPHYs, using the generic PHY framework [1]. Previously the MIPI
CSIS and MIPI DSIM used a platform callback to control the PHY power
enable and reset bits. The platform callback can now be dropped and
those drivers don't need any calls back to the platform code, which
makes migration to the device tree complete for MIPI CSIS.

Changes since v3 (only patch 1/5):
 - replaced spin_(un)lock_irq_{save,restore} with spin_{lock,unlock}.
 - DT binding file renamed to samsung-phy.txt, so it can be used for
   other PHYs as well,
 - removed <linux/delay.h> inclusion,
 - added missing spin_lock_init().

Changes since v2:
 - adapted to the generic PHY API v9: use phy_set/get_drvdata(),
 - fixed of_xlate callback to return ERR_PTR() instead of NULL,
 - namespace cleanup, put "GPL v2" as MODULE_LICENSE, removed pr_debug,
 - removed phy id check in __set_phy_state().

Patches 2...3/5 are unchanged, description of patch 5/5 has been
updated.

Changes since v1:
 - enabled build as module and with CONFIG_OF disabled,
 - added phy_id enum,
 - of_address_to_resource() replaced with platform_get_resource(),
 - adapted to changes in the PHY API v7, v8 - added phy labels,
 - added MODULE_DEVICE_TABLE() entry,
 - the driver file renamed to phy-exynos-mipi-video.c,
 - changed DT compatible string to "samsung,s5pv210-mipi-video-phy",
 - corrected the compatible property's description.
 - patch 3/5 "video: exynos_dsi: Use generic PHY driver" replaced
   with a patch modifying the MIPI DSIM driver which is currently
   in mainline.

This series depends on the generic PHY framework [1]. It can be browsed at:
 http://git.linuxtv.org/snawrocki/samsung.git/exynos-mipi-phy
This branch is based on the 'for-next' branch from:
 git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
and the patch series:
 http://www.spinics.net/lists/arm-kernel/msg254667.html

[1] https://lkml.org/lkml/2013/6/26/259

Sylwester Nawrocki (5):
  ARM: dts: Add MIPI PHY node to exynos4.dtsi
  phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
  video: exynos_mipi_dsim: Use the generic PHY driver
  [media] exynos4-is: Use the generic MIPI CSIS PHY driver
  ARM: Samsung: Remove the MIPI PHY setup code

 .../devicetree/bindings/phy/samsung-phy.txt        |   14 ++
 arch/arm/boot/dts/exynos4.dtsi                     |   10 ++
 arch/arm/mach-exynos/include/mach/regs-pmu.h       |    5 -
 arch/arm/mach-s5pv210/include/mach/regs-clock.h    |    4 -
 arch/arm/plat-samsung/Kconfig                      |    5 -
 arch/arm/plat-samsung/Makefile                     |    1 -
 arch/arm/plat-samsung/setup-mipiphy.c              |   60 -------
 drivers/media/platform/exynos4-is/mipi-csis.c      |   16 +-
 drivers/phy/Kconfig                                |    9 ++
 drivers/phy/Makefile                               |    3 +-
 drivers/phy/phy-exynos-mipi-video.c                |  169 ++++++++++++++++++++
 drivers/video/exynos/exynos_mipi_dsi.c             |   19 +--
 include/linux/platform_data/mipi-csis.h            |   11 +-
 include/video/exynos_mipi_dsim.h                   |    6 +-
 14 files changed, 233 insertions(+), 99 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt
 delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c
 create mode 100644 drivers/phy/phy-exynos-mipi-video.c

--
1.7.9.5

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCH v4 1/5] ARM: dts: Add MIPI PHY node to exynos4.dtsi
  2013-06-28 13:43 ` Sylwester Nawrocki
  (?)
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  -1 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel, linux-samsung-soc
  Cc: kishon, linux-media, kyungmin.park, balbi, t.figa,
	devicetree-discuss, kgene.kim, dh09.lee, jg1.han, inki.dae,
	tomi.valkeinen, plagnioj, jason77.wang, linux-fbdev,
	Sylwester Nawrocki

Add PHY provider node for the MIPI CSIS and MIPI DSIM PHYs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/boot/dts/exynos4.dtsi |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 4d61120..1750511 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -49,6 +49,12 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	mipi_phy: video-phy@10020710 {
+		compatible = "samsung,s5pv210-mipi-video-phy";
+		reg = <0x10020710 8>;
+		#phy-cells = <1>;
+	};
+
 	pd_mfc: mfc-power-domain@10023C40 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C40 0x20>;
@@ -147,6 +153,8 @@
 			interrupts = <0 78 0>;
 			bus-width = <4>;
 			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 0>;
+			phy-names = "csis";
 			status = "disabled";
 		};
 
@@ -156,6 +164,8 @@
 			interrupts = <0 80 0>;
 			bus-width = <2>;
 			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 2>;
+			phy-names = "csis";
 			status = "disabled";
 		};
 	};
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 1/5] ARM: dts: Add MIPI PHY node to exynos4.dtsi
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Add PHY provider node for the MIPI CSIS and MIPI DSIM PHYs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/boot/dts/exynos4.dtsi |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 4d61120..1750511 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -49,6 +49,12 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	mipi_phy: video-phy@10020710 {
+		compatible = "samsung,s5pv210-mipi-video-phy";
+		reg = <0x10020710 8>;
+		#phy-cells = <1>;
+	};
+
 	pd_mfc: mfc-power-domain@10023C40 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C40 0x20>;
@@ -147,6 +153,8 @@
 			interrupts = <0 78 0>;
 			bus-width = <4>;
 			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 0>;
+			phy-names = "csis";
 			status = "disabled";
 		};
 
@@ -156,6 +164,8 @@
 			interrupts = <0 80 0>;
 			bus-width = <2>;
 			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 2>;
+			phy-names = "csis";
 			status = "disabled";
 		};
 	};
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 1/5] ARM: dts: Add MIPI PHY node to exynos4.dtsi
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Add PHY provider node for the MIPI CSIS and MIPI DSIM PHYs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/boot/dts/exynos4.dtsi |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 4d61120..1750511 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -49,6 +49,12 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	mipi_phy: video-phy at 10020710 {
+		compatible = "samsung,s5pv210-mipi-video-phy";
+		reg = <0x10020710 8>;
+		#phy-cells = <1>;
+	};
+
 	pd_mfc: mfc-power-domain at 10023C40 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C40 0x20>;
@@ -147,6 +153,8 @@
 			interrupts = <0 78 0>;
 			bus-width = <4>;
 			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 0>;
+			phy-names = "csis";
 			status = "disabled";
 		};
 
@@ -156,6 +164,8 @@
 			interrupts = <0 80 0>;
 			bus-width = <2>;
 			samsung,power-domain = <&pd_cam>;
+			phys = <&mipi_phy 2>;
+			phy-names = "csis";
 			status = "disabled";
 		};
 	};
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 2/5] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
  2013-06-28 13:43 ` Sylwester Nawrocki
  (?)
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  -1 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel, linux-samsung-soc
  Cc: kishon, linux-media, kyungmin.park, balbi, t.figa,
	devicetree-discuss, kgene.kim, dh09.lee, jg1.han, inki.dae,
	tomi.valkeinen, plagnioj, jason77.wang, linux-fbdev,
	Sylwester Nawrocki

Add a PHY provider driver for the Samsung S5P/Exynos SoC MIPI CSI-2
receiver and MIPI DSI transmitter DPHYs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
Changes since v3:
 - replaced spin_(un)lock_irq_{save,restore} with spin_{lock,unlock}.
 - DT binding file renamed to samsung-phy.txt, so it can be used for
   other PHYs as well,
 - removed <linux/delay.h> inclusion,
 - added missing spin_lock_init().
---
 .../devicetree/bindings/phy/samsung-phy.txt        |   14 ++
 drivers/phy/Kconfig                                |    9 ++
 drivers/phy/Makefile                               |    3 +-
 drivers/phy/phy-exynos-mipi-video.c                |  169 ++++++++++++++++++++
 4 files changed, 194 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt
 create mode 100644 drivers/phy/phy-exynos-mipi-video.c

diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
new file mode 100644
index 0000000..5ff208c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -0,0 +1,14 @@
+Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
+-------------------------------------------------
+
+Required properties:
+- compatible : should be "samsung,s5pv210-mipi-video-phy";
+- reg : offset and length of the MIPI DPHY register set;
+- #phy-cells : from the generic phy bindings, must be 1;
+
+For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
+the PHY specifier identifies the PHY and its meaning is as follows:
+  0 - MIPI CSIS 0,
+  1 - MIPI DSIM 0,
+  2 - MIPI CSIS 1,
+  3 - MIPI DSIM 1.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 5f85909..6f446d0 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -11,3 +11,12 @@ menuconfig GENERIC_PHY
 	  devices present in the kernel. This layer will have the generic
 	  API by which phy drivers can create PHY using the phy framework and
 	  phy users can obtain reference to the PHY.
+
+if GENERIC_PHY
+
+config PHY_EXYNOS_MIPI_VIDEO
+	tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+	help
+	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung
+	  S5P and EXYNOS SoCs.
+endif
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9e9560f..71d8841 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -2,4 +2,5 @@
 # Makefile for the phy drivers.
 #
 
-obj-$(CONFIG_GENERIC_PHY)	+= phy-core.o
+obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
new file mode 100644
index 0000000..7e7fcd7
--- /dev/null
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -0,0 +1,169 @@
+/*
+ * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
+#define EXYNOS_MIPI_PHY_CONTROL(n)	((n) * 4)
+#define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
+#define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
+#define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
+#define EXYNOS_MIPI_PHY_RESET_MASK	(3 << 1)
+
+enum exynos_mipi_phy_id {
+	EXYNOS_MIPI_PHY_ID_CSIS0,
+	EXYNOS_MIPI_PHY_ID_DSIM0,
+	EXYNOS_MIPI_PHY_ID_CSIS1,
+	EXYNOS_MIPI_PHY_ID_DSIM1,
+	EXYNOS_MIPI_PHYS_NUM
+};
+
+#define IS_EXYNOS_MIPI_DSIM_PHY_ID(id) \
+	((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM0)
+
+struct exynos_mipi_video_phy {
+	spinlock_t slock;
+	struct phy *phys[EXYNOS_MIPI_PHYS_NUM];
+	void __iomem *regs;
+};
+
+static int __set_phy_state(struct exynos_mipi_video_phy *state,
+			enum exynos_mipi_phy_id id, unsigned int on)
+{
+	void __iomem *addr;
+	u32 reg, reset;
+
+	addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
+
+	if (IS_EXYNOS_MIPI_DSIM_PHY_ID(id))
+		reset = EXYNOS_MIPI_PHY_MRESETN;
+	else
+		reset = EXYNOS_MIPI_PHY_SRESETN;
+
+	spin_lock(&state->slock);
+	reg = readl(addr);
+	if (on)
+		reg |= reset;
+	else
+		reg &= ~reset;
+	writel(reg, addr);
+
+	/* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */
+	if (on)
+		reg |= EXYNOS_MIPI_PHY_ENABLE;
+	else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK))
+		reg &= ~EXYNOS_MIPI_PHY_ENABLE;
+
+	writel(reg, addr);
+	spin_unlock(&state->slock);
+	return 0;
+}
+
+static int exynos_mipi_video_phy_power_on(struct phy *phy)
+{
+	struct exynos_mipi_video_phy *state = phy_get_drvdata(phy);
+	return __set_phy_state(state, phy->id, 1);
+}
+
+static int exynos_mipi_video_phy_power_off(struct phy *phy)
+{
+	struct exynos_mipi_video_phy *state = phy_get_drvdata(phy);
+	return __set_phy_state(state, phy->id, 0);
+}
+
+static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] > EXYNOS_MIPI_PHYS_NUM))
+		return ERR_PTR(-ENODEV);
+
+	return state->phys[args->args[0]];
+}
+
+static struct phy_ops exynos_mipi_video_phy_ops = {
+	.power_on	= exynos_mipi_video_phy_power_on,
+	.power_off	= exynos_mipi_video_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
+{
+	struct exynos_mipi_video_phy *state;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	int i;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	state->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	dev_set_drvdata(dev, state);
+	spin_lock_init(&state->slock);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+					exynos_mipi_video_phy_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
+		char label[8];
+
+		snprintf(label, sizeof(label), "%s.%d",
+				IS_EXYNOS_MIPI_DSIM_PHY_ID(i) ?
+				"dsim" : "csis", i / 2);
+
+		state->phys[i] = devm_phy_create(dev, i,
+				&exynos_mipi_video_phy_ops, label);
+		if (IS_ERR(state->phys[i])) {
+			dev_err(dev, "failed to create PHY %s\n", label);
+			return PTR_ERR(state->phys[i]);
+		}
+		phy_set_drvdata(state->phys[i], state);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
+	{ .compatible = "samsung,s5pv210-mipi-video-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
+
+static struct platform_driver exynos_mipi_video_phy_driver = {
+	.probe	= exynos_mipi_video_phy_probe,
+	.driver = {
+		.of_match_table	= exynos_mipi_video_phy_of_match,
+		.name  = "exynos-mipi-video-phy",
+		.owner = THIS_MODULE,
+	}
+};
+module_platform_driver(exynos_mipi_video_phy_driver);
+
+MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 2/5] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Add a PHY provider driver for the Samsung S5P/Exynos SoC MIPI CSI-2
receiver and MIPI DSI transmitter DPHYs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
Changes since v3:
 - replaced spin_(un)lock_irq_{save,restore} with spin_{lock,unlock}.
 - DT binding file renamed to samsung-phy.txt, so it can be used for
   other PHYs as well,
 - removed <linux/delay.h> inclusion,
 - added missing spin_lock_init().
---
 .../devicetree/bindings/phy/samsung-phy.txt        |   14 ++
 drivers/phy/Kconfig                                |    9 ++
 drivers/phy/Makefile                               |    3 +-
 drivers/phy/phy-exynos-mipi-video.c                |  169 ++++++++++++++++++++
 4 files changed, 194 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt
 create mode 100644 drivers/phy/phy-exynos-mipi-video.c

diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
new file mode 100644
index 0000000..5ff208c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -0,0 +1,14 @@
+Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
+-------------------------------------------------
+
+Required properties:
+- compatible : should be "samsung,s5pv210-mipi-video-phy";
+- reg : offset and length of the MIPI DPHY register set;
+- #phy-cells : from the generic phy bindings, must be 1;
+
+For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
+the PHY specifier identifies the PHY and its meaning is as follows:
+  0 - MIPI CSIS 0,
+  1 - MIPI DSIM 0,
+  2 - MIPI CSIS 1,
+  3 - MIPI DSIM 1.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 5f85909..6f446d0 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -11,3 +11,12 @@ menuconfig GENERIC_PHY
 	  devices present in the kernel. This layer will have the generic
 	  API by which phy drivers can create PHY using the phy framework and
 	  phy users can obtain reference to the PHY.
+
+if GENERIC_PHY
+
+config PHY_EXYNOS_MIPI_VIDEO
+	tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+	help
+	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung
+	  S5P and EXYNOS SoCs.
+endif
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9e9560f..71d8841 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -2,4 +2,5 @@
 # Makefile for the phy drivers.
 #
 
-obj-$(CONFIG_GENERIC_PHY)	+= phy-core.o
+obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
new file mode 100644
index 0000000..7e7fcd7
--- /dev/null
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -0,0 +1,169 @@
+/*
+ * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
+#define EXYNOS_MIPI_PHY_CONTROL(n)	((n) * 4)
+#define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
+#define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
+#define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
+#define EXYNOS_MIPI_PHY_RESET_MASK	(3 << 1)
+
+enum exynos_mipi_phy_id {
+	EXYNOS_MIPI_PHY_ID_CSIS0,
+	EXYNOS_MIPI_PHY_ID_DSIM0,
+	EXYNOS_MIPI_PHY_ID_CSIS1,
+	EXYNOS_MIPI_PHY_ID_DSIM1,
+	EXYNOS_MIPI_PHYS_NUM
+};
+
+#define IS_EXYNOS_MIPI_DSIM_PHY_ID(id) \
+	((id) = EXYNOS_MIPI_PHY_ID_DSIM0 || (id) = EXYNOS_MIPI_PHY_ID_DSIM0)
+
+struct exynos_mipi_video_phy {
+	spinlock_t slock;
+	struct phy *phys[EXYNOS_MIPI_PHYS_NUM];
+	void __iomem *regs;
+};
+
+static int __set_phy_state(struct exynos_mipi_video_phy *state,
+			enum exynos_mipi_phy_id id, unsigned int on)
+{
+	void __iomem *addr;
+	u32 reg, reset;
+
+	addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
+
+	if (IS_EXYNOS_MIPI_DSIM_PHY_ID(id))
+		reset = EXYNOS_MIPI_PHY_MRESETN;
+	else
+		reset = EXYNOS_MIPI_PHY_SRESETN;
+
+	spin_lock(&state->slock);
+	reg = readl(addr);
+	if (on)
+		reg |= reset;
+	else
+		reg &= ~reset;
+	writel(reg, addr);
+
+	/* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */
+	if (on)
+		reg |= EXYNOS_MIPI_PHY_ENABLE;
+	else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK))
+		reg &= ~EXYNOS_MIPI_PHY_ENABLE;
+
+	writel(reg, addr);
+	spin_unlock(&state->slock);
+	return 0;
+}
+
+static int exynos_mipi_video_phy_power_on(struct phy *phy)
+{
+	struct exynos_mipi_video_phy *state = phy_get_drvdata(phy);
+	return __set_phy_state(state, phy->id, 1);
+}
+
+static int exynos_mipi_video_phy_power_off(struct phy *phy)
+{
+	struct exynos_mipi_video_phy *state = phy_get_drvdata(phy);
+	return __set_phy_state(state, phy->id, 0);
+}
+
+static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] > EXYNOS_MIPI_PHYS_NUM))
+		return ERR_PTR(-ENODEV);
+
+	return state->phys[args->args[0]];
+}
+
+static struct phy_ops exynos_mipi_video_phy_ops = {
+	.power_on	= exynos_mipi_video_phy_power_on,
+	.power_off	= exynos_mipi_video_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
+{
+	struct exynos_mipi_video_phy *state;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	int i;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	state->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	dev_set_drvdata(dev, state);
+	spin_lock_init(&state->slock);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+					exynos_mipi_video_phy_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
+		char label[8];
+
+		snprintf(label, sizeof(label), "%s.%d",
+				IS_EXYNOS_MIPI_DSIM_PHY_ID(i) ?
+				"dsim" : "csis", i / 2);
+
+		state->phys[i] = devm_phy_create(dev, i,
+				&exynos_mipi_video_phy_ops, label);
+		if (IS_ERR(state->phys[i])) {
+			dev_err(dev, "failed to create PHY %s\n", label);
+			return PTR_ERR(state->phys[i]);
+		}
+		phy_set_drvdata(state->phys[i], state);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
+	{ .compatible = "samsung,s5pv210-mipi-video-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
+
+static struct platform_driver exynos_mipi_video_phy_driver = {
+	.probe	= exynos_mipi_video_phy_probe,
+	.driver = {
+		.of_match_table	= exynos_mipi_video_phy_of_match,
+		.name  = "exynos-mipi-video-phy",
+		.owner = THIS_MODULE,
+	}
+};
+module_platform_driver(exynos_mipi_video_phy_driver);
+
+MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 2/5] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Add a PHY provider driver for the Samsung S5P/Exynos SoC MIPI CSI-2
receiver and MIPI DSI transmitter DPHYs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
---
Changes since v3:
 - replaced spin_(un)lock_irq_{save,restore} with spin_{lock,unlock}.
 - DT binding file renamed to samsung-phy.txt, so it can be used for
   other PHYs as well,
 - removed <linux/delay.h> inclusion,
 - added missing spin_lock_init().
---
 .../devicetree/bindings/phy/samsung-phy.txt        |   14 ++
 drivers/phy/Kconfig                                |    9 ++
 drivers/phy/Makefile                               |    3 +-
 drivers/phy/phy-exynos-mipi-video.c                |  169 ++++++++++++++++++++
 4 files changed, 194 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/samsung-phy.txt
 create mode 100644 drivers/phy/phy-exynos-mipi-video.c

diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
new file mode 100644
index 0000000..5ff208c
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -0,0 +1,14 @@
+Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
+-------------------------------------------------
+
+Required properties:
+- compatible : should be "samsung,s5pv210-mipi-video-phy";
+- reg : offset and length of the MIPI DPHY register set;
+- #phy-cells : from the generic phy bindings, must be 1;
+
+For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
+the PHY specifier identifies the PHY and its meaning is as follows:
+  0 - MIPI CSIS 0,
+  1 - MIPI DSIM 0,
+  2 - MIPI CSIS 1,
+  3 - MIPI DSIM 1.
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 5f85909..6f446d0 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -11,3 +11,12 @@ menuconfig GENERIC_PHY
 	  devices present in the kernel. This layer will have the generic
 	  API by which phy drivers can create PHY using the phy framework and
 	  phy users can obtain reference to the PHY.
+
+if GENERIC_PHY
+
+config PHY_EXYNOS_MIPI_VIDEO
+	tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+	help
+	  Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung
+	  S5P and EXYNOS SoCs.
+endif
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 9e9560f..71d8841 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -2,4 +2,5 @@
 # Makefile for the phy drivers.
 #
 
-obj-$(CONFIG_GENERIC_PHY)	+= phy-core.o
+obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
new file mode 100644
index 0000000..7e7fcd7
--- /dev/null
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -0,0 +1,169 @@
+/*
+ * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
+#define EXYNOS_MIPI_PHY_CONTROL(n)	((n) * 4)
+#define EXYNOS_MIPI_PHY_ENABLE		(1 << 0)
+#define EXYNOS_MIPI_PHY_SRESETN		(1 << 1)
+#define EXYNOS_MIPI_PHY_MRESETN		(1 << 2)
+#define EXYNOS_MIPI_PHY_RESET_MASK	(3 << 1)
+
+enum exynos_mipi_phy_id {
+	EXYNOS_MIPI_PHY_ID_CSIS0,
+	EXYNOS_MIPI_PHY_ID_DSIM0,
+	EXYNOS_MIPI_PHY_ID_CSIS1,
+	EXYNOS_MIPI_PHY_ID_DSIM1,
+	EXYNOS_MIPI_PHYS_NUM
+};
+
+#define IS_EXYNOS_MIPI_DSIM_PHY_ID(id) \
+	((id) == EXYNOS_MIPI_PHY_ID_DSIM0 || (id) == EXYNOS_MIPI_PHY_ID_DSIM0)
+
+struct exynos_mipi_video_phy {
+	spinlock_t slock;
+	struct phy *phys[EXYNOS_MIPI_PHYS_NUM];
+	void __iomem *regs;
+};
+
+static int __set_phy_state(struct exynos_mipi_video_phy *state,
+			enum exynos_mipi_phy_id id, unsigned int on)
+{
+	void __iomem *addr;
+	u32 reg, reset;
+
+	addr = state->regs + EXYNOS_MIPI_PHY_CONTROL(id / 2);
+
+	if (IS_EXYNOS_MIPI_DSIM_PHY_ID(id))
+		reset = EXYNOS_MIPI_PHY_MRESETN;
+	else
+		reset = EXYNOS_MIPI_PHY_SRESETN;
+
+	spin_lock(&state->slock);
+	reg = readl(addr);
+	if (on)
+		reg |= reset;
+	else
+		reg &= ~reset;
+	writel(reg, addr);
+
+	/* Clear ENABLE bit only if MRESETN, SRESETN bits are not set. */
+	if (on)
+		reg |= EXYNOS_MIPI_PHY_ENABLE;
+	else if (!(reg & EXYNOS_MIPI_PHY_RESET_MASK))
+		reg &= ~EXYNOS_MIPI_PHY_ENABLE;
+
+	writel(reg, addr);
+	spin_unlock(&state->slock);
+	return 0;
+}
+
+static int exynos_mipi_video_phy_power_on(struct phy *phy)
+{
+	struct exynos_mipi_video_phy *state = phy_get_drvdata(phy);
+	return __set_phy_state(state, phy->id, 1);
+}
+
+static int exynos_mipi_video_phy_power_off(struct phy *phy)
+{
+	struct exynos_mipi_video_phy *state = phy_get_drvdata(phy);
+	return __set_phy_state(state, phy->id, 0);
+}
+
+static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
+
+	if (WARN_ON(args->args[0] > EXYNOS_MIPI_PHYS_NUM))
+		return ERR_PTR(-ENODEV);
+
+	return state->phys[args->args[0]];
+}
+
+static struct phy_ops exynos_mipi_video_phy_ops = {
+	.power_on	= exynos_mipi_video_phy_power_on,
+	.power_off	= exynos_mipi_video_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
+{
+	struct exynos_mipi_video_phy *state;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+	int i;
+
+	state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+	if (!state)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	state->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(state->regs))
+		return PTR_ERR(state->regs);
+
+	dev_set_drvdata(dev, state);
+	spin_lock_init(&state->slock);
+
+	phy_provider = devm_of_phy_provider_register(dev,
+					exynos_mipi_video_phy_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	for (i = 0; i < EXYNOS_MIPI_PHYS_NUM; i++) {
+		char label[8];
+
+		snprintf(label, sizeof(label), "%s.%d",
+				IS_EXYNOS_MIPI_DSIM_PHY_ID(i) ?
+				"dsim" : "csis", i / 2);
+
+		state->phys[i] = devm_phy_create(dev, i,
+				&exynos_mipi_video_phy_ops, label);
+		if (IS_ERR(state->phys[i])) {
+			dev_err(dev, "failed to create PHY %s\n", label);
+			return PTR_ERR(state->phys[i]);
+		}
+		phy_set_drvdata(state->phys[i], state);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
+	{ .compatible = "samsung,s5pv210-mipi-video-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
+
+static struct platform_driver exynos_mipi_video_phy_driver = {
+	.probe	= exynos_mipi_video_phy_probe,
+	.driver = {
+		.of_match_table	= exynos_mipi_video_phy_of_match,
+		.name  = "exynos-mipi-video-phy",
+		.owner = THIS_MODULE,
+	}
+};
+module_platform_driver(exynos_mipi_video_phy_driver);
+
+MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 3/5] video: exynos_mipi_dsim: Use the generic PHY driver
  2013-06-28 13:43 ` Sylwester Nawrocki
  (?)
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  -1 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel, linux-samsung-soc
  Cc: kishon, linux-media, kyungmin.park, balbi, t.figa,
	devicetree-discuss, kgene.kim, dh09.lee, jg1.han, inki.dae,
	tomi.valkeinen, plagnioj, jason77.wang, linux-fbdev,
	Sylwester Nawrocki

Use the generic PHY API instead of the platform callback to control
the MIPI DSIM DPHY. The 'phy_label' field is added to the platform
data structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Donghwa Lee <dh09.lee@samsung.com>
---
 drivers/video/exynos/exynos_mipi_dsi.c |   19 ++++++++++---------
 include/video/exynos_mipi_dsim.h       |    6 ++++--
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
index 32e5406..248e444 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
 #include <linux/notifier.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/err.h>
@@ -156,8 +157,7 @@ static int exynos_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power)
 		exynos_mipi_regulator_enable(dsim);
 
 		/* enable MIPI-DSI PHY. */
-		if (dsim->pd->phy_enable)
-			dsim->pd->phy_enable(pdev, true);
+		phy_power_on(dsim->phy);
 
 		clk_enable(dsim->clock);
 
@@ -373,6 +373,10 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	dsim->phy = devm_phy_get(&pdev->dev, dsim_pd->phy_label);
+	if (IS_ERR(dsim->phy))
+		return PTR_ERR(dsim->phy);
+
 	dsim->clock = devm_clk_get(&pdev->dev, "dsim0");
 	if (IS_ERR(dsim->clock)) {
 		dev_err(&pdev->dev, "failed to get dsim clock source\n");
@@ -439,8 +443,7 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
 	exynos_mipi_regulator_enable(dsim);
 
 	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, true);
+	phy_power_on(dsim->phy);
 
 	exynos_mipi_update_cfg(dsim);
 
@@ -504,9 +507,8 @@ static int exynos_mipi_dsi_suspend(struct device *dev)
 	if (client_drv && client_drv->suspend)
 		client_drv->suspend(client_dev);
 
-	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, false);
+	/* disable MIPI-DSI PHY. */
+	phy_power_off(dsim->phy);
 
 	clk_disable(dsim->clock);
 
@@ -536,8 +538,7 @@ static int exynos_mipi_dsi_resume(struct device *dev)
 	exynos_mipi_regulator_enable(dsim);
 
 	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, true);
+	phy_power_on(dsim->phy);
 
 	clk_enable(dsim->clock);
 
diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
index 89dc88a..fd69beb 100644
--- a/include/video/exynos_mipi_dsim.h
+++ b/include/video/exynos_mipi_dsim.h
@@ -216,6 +216,7 @@ struct mipi_dsim_config {
  *	automatically.
  * @e_clk_src: select byte clock source.
  * @pd: pointer to MIPI-DSI driver platform data.
+ * @phy: pointer to the generic PHY
  */
 struct mipi_dsim_device {
 	struct device			*dev;
@@ -236,6 +237,7 @@ struct mipi_dsim_device {
 	bool				suspended;
 
 	struct mipi_dsim_platform_data	*pd;
+	struct phy			*phy;
 };
 
 /*
@@ -248,7 +250,7 @@ struct mipi_dsim_device {
  * @enabled: indicate whether mipi controller got enabled or not.
  * @lcd_panel_info: pointer for lcd panel specific structure.
  *	this structure specifies width, height, timing and polarity and so on.
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ * @phy_label: the generic PHY label
  */
 struct mipi_dsim_platform_data {
 	char				lcd_panel_name[PANEL_NAME_SIZE];
@@ -257,7 +259,7 @@ struct mipi_dsim_platform_data {
 	unsigned int			enabled;
 	void				*lcd_panel_info;
 
-	int (*phy_enable)(struct platform_device *pdev, bool on);
+	const char 			*phy_label;
 };
 
 /*
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 3/5] video: exynos_mipi_dsim: Use the generic PHY driver
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Use the generic PHY API instead of the platform callback to control
the MIPI DSIM DPHY. The 'phy_label' field is added to the platform
data structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Donghwa Lee <dh09.lee@samsung.com>
---
 drivers/video/exynos/exynos_mipi_dsi.c |   19 ++++++++++---------
 include/video/exynos_mipi_dsim.h       |    6 ++++--
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
index 32e5406..248e444 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
 #include <linux/notifier.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/err.h>
@@ -156,8 +157,7 @@ static int exynos_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power)
 		exynos_mipi_regulator_enable(dsim);
 
 		/* enable MIPI-DSI PHY. */
-		if (dsim->pd->phy_enable)
-			dsim->pd->phy_enable(pdev, true);
+		phy_power_on(dsim->phy);
 
 		clk_enable(dsim->clock);
 
@@ -373,6 +373,10 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	dsim->phy = devm_phy_get(&pdev->dev, dsim_pd->phy_label);
+	if (IS_ERR(dsim->phy))
+		return PTR_ERR(dsim->phy);
+
 	dsim->clock = devm_clk_get(&pdev->dev, "dsim0");
 	if (IS_ERR(dsim->clock)) {
 		dev_err(&pdev->dev, "failed to get dsim clock source\n");
@@ -439,8 +443,7 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
 	exynos_mipi_regulator_enable(dsim);
 
 	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, true);
+	phy_power_on(dsim->phy);
 
 	exynos_mipi_update_cfg(dsim);
 
@@ -504,9 +507,8 @@ static int exynos_mipi_dsi_suspend(struct device *dev)
 	if (client_drv && client_drv->suspend)
 		client_drv->suspend(client_dev);
 
-	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, false);
+	/* disable MIPI-DSI PHY. */
+	phy_power_off(dsim->phy);
 
 	clk_disable(dsim->clock);
 
@@ -536,8 +538,7 @@ static int exynos_mipi_dsi_resume(struct device *dev)
 	exynos_mipi_regulator_enable(dsim);
 
 	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, true);
+	phy_power_on(dsim->phy);
 
 	clk_enable(dsim->clock);
 
diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
index 89dc88a..fd69beb 100644
--- a/include/video/exynos_mipi_dsim.h
+++ b/include/video/exynos_mipi_dsim.h
@@ -216,6 +216,7 @@ struct mipi_dsim_config {
  *	automatically.
  * @e_clk_src: select byte clock source.
  * @pd: pointer to MIPI-DSI driver platform data.
+ * @phy: pointer to the generic PHY
  */
 struct mipi_dsim_device {
 	struct device			*dev;
@@ -236,6 +237,7 @@ struct mipi_dsim_device {
 	bool				suspended;
 
 	struct mipi_dsim_platform_data	*pd;
+	struct phy			*phy;
 };
 
 /*
@@ -248,7 +250,7 @@ struct mipi_dsim_device {
  * @enabled: indicate whether mipi controller got enabled or not.
  * @lcd_panel_info: pointer for lcd panel specific structure.
  *	this structure specifies width, height, timing and polarity and so on.
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ * @phy_label: the generic PHY label
  */
 struct mipi_dsim_platform_data {
 	char				lcd_panel_name[PANEL_NAME_SIZE];
@@ -257,7 +259,7 @@ struct mipi_dsim_platform_data {
 	unsigned int			enabled;
 	void				*lcd_panel_info;
 
-	int (*phy_enable)(struct platform_device *pdev, bool on);
+	const char 			*phy_label;
 };
 
 /*
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 3/5] video: exynos_mipi_dsim: Use the generic PHY driver
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Use the generic PHY API instead of the platform callback to control
the MIPI DSIM DPHY. The 'phy_label' field is added to the platform
data structure to allow PHY lookup on non-dt platforms.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Donghwa Lee <dh09.lee@samsung.com>
---
 drivers/video/exynos/exynos_mipi_dsi.c |   19 ++++++++++---------
 include/video/exynos_mipi_dsim.h       |    6 ++++--
 2 files changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/exynos/exynos_mipi_dsi.c
index 32e5406..248e444 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/exynos/exynos_mipi_dsi.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/kthread.h>
 #include <linux/notifier.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/err.h>
@@ -156,8 +157,7 @@ static int exynos_mipi_dsi_blank_mode(struct mipi_dsim_device *dsim, int power)
 		exynos_mipi_regulator_enable(dsim);
 
 		/* enable MIPI-DSI PHY. */
-		if (dsim->pd->phy_enable)
-			dsim->pd->phy_enable(pdev, true);
+		phy_power_on(dsim->phy);
 
 		clk_enable(dsim->clock);
 
@@ -373,6 +373,10 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	dsim->phy = devm_phy_get(&pdev->dev, dsim_pd->phy_label);
+	if (IS_ERR(dsim->phy))
+		return PTR_ERR(dsim->phy);
+
 	dsim->clock = devm_clk_get(&pdev->dev, "dsim0");
 	if (IS_ERR(dsim->clock)) {
 		dev_err(&pdev->dev, "failed to get dsim clock source\n");
@@ -439,8 +443,7 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
 	exynos_mipi_regulator_enable(dsim);
 
 	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, true);
+	phy_power_on(dsim->phy);
 
 	exynos_mipi_update_cfg(dsim);
 
@@ -504,9 +507,8 @@ static int exynos_mipi_dsi_suspend(struct device *dev)
 	if (client_drv && client_drv->suspend)
 		client_drv->suspend(client_dev);
 
-	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, false);
+	/* disable MIPI-DSI PHY. */
+	phy_power_off(dsim->phy);
 
 	clk_disable(dsim->clock);
 
@@ -536,8 +538,7 @@ static int exynos_mipi_dsi_resume(struct device *dev)
 	exynos_mipi_regulator_enable(dsim);
 
 	/* enable MIPI-DSI PHY. */
-	if (dsim->pd->phy_enable)
-		dsim->pd->phy_enable(pdev, true);
+	phy_power_on(dsim->phy);
 
 	clk_enable(dsim->clock);
 
diff --git a/include/video/exynos_mipi_dsim.h b/include/video/exynos_mipi_dsim.h
index 89dc88a..fd69beb 100644
--- a/include/video/exynos_mipi_dsim.h
+++ b/include/video/exynos_mipi_dsim.h
@@ -216,6 +216,7 @@ struct mipi_dsim_config {
  *	automatically.
  * @e_clk_src: select byte clock source.
  * @pd: pointer to MIPI-DSI driver platform data.
+ * @phy: pointer to the generic PHY
  */
 struct mipi_dsim_device {
 	struct device			*dev;
@@ -236,6 +237,7 @@ struct mipi_dsim_device {
 	bool				suspended;
 
 	struct mipi_dsim_platform_data	*pd;
+	struct phy			*phy;
 };
 
 /*
@@ -248,7 +250,7 @@ struct mipi_dsim_device {
  * @enabled: indicate whether mipi controller got enabled or not.
  * @lcd_panel_info: pointer for lcd panel specific structure.
  *	this structure specifies width, height, timing and polarity and so on.
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ * @phy_label: the generic PHY label
  */
 struct mipi_dsim_platform_data {
 	char				lcd_panel_name[PANEL_NAME_SIZE];
@@ -257,7 +259,7 @@ struct mipi_dsim_platform_data {
 	unsigned int			enabled;
 	void				*lcd_panel_info;
 
-	int (*phy_enable)(struct platform_device *pdev, bool on);
+	const char 			*phy_label;
 };
 
 /*
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 4/5] [media] exynos4-is: Use the generic MIPI CSIS PHY driver
  2013-06-28 13:43 ` Sylwester Nawrocki
  (?)
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  -1 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel, linux-samsung-soc
  Cc: kishon, linux-media, kyungmin.park, balbi, t.figa,
	devicetree-discuss, kgene.kim, dh09.lee, jg1.han, inki.dae,
	tomi.valkeinen, plagnioj, jason77.wang, linux-fbdev,
	Sylwester Nawrocki

Use the generic PHY API instead of the platform callback to control
the MIPI CSIS DPHY. The 'phy_label' field is added to the platform
data structure to allow PHY lookup on non-dt platforms

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/platform/exynos4-is/mipi-csis.c |   16 +++++++++++++---
 include/linux/platform_data/mipi-csis.h       |   11 ++---------
 2 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index a2eda9d..8436254 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -20,6 +20,7 @@
 #include <linux/memory.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/mipi-csis.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -167,6 +168,7 @@ struct csis_pktbuf {
  * @sd: v4l2_subdev associated with CSIS device instance
  * @index: the hardware instance index
  * @pdev: CSIS platform device
+ * @phy: pointer to the CSIS generic PHY
  * @regs: mmaped I/O registers memory
  * @supplies: CSIS regulator supplies
  * @clock: CSIS clocks
@@ -189,6 +191,8 @@ struct csis_state {
 	struct v4l2_subdev sd;
 	u8 index;
 	struct platform_device *pdev;
+	struct phy *phy;
+	const char *phy_label;
 	void __iomem *regs;
 	struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES];
 	struct clk *clock[NUM_CSIS_CLOCKS];
@@ -726,6 +730,7 @@ static int s5pcsis_get_platform_data(struct platform_device *pdev,
 	state->index = max(0, pdev->id);
 	state->max_num_lanes = state->index ? CSIS1_MAX_LANES :
 					      CSIS0_MAX_LANES;
+	state->phy_label = pdata->phy_label;
 	return 0;
 }
 
@@ -763,8 +768,9 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
 					"samsung,csis-wclk");
 
 	state->num_lanes = endpoint.bus.mipi_csi2.num_data_lanes;
-
 	of_node_put(node);
+
+	state->phy_label = "csis";
 	return 0;
 }
 #else
@@ -800,6 +806,10 @@ static int s5pcsis_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	state->phy = devm_phy_get(dev, state->phy_label);
+	if (IS_ERR(state->phy))
+		return PTR_ERR(state->phy);
+
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	state->regs = devm_ioremap_resource(dev, mem_res);
 	if (IS_ERR(state->regs))
@@ -893,7 +903,7 @@ static int s5pcsis_pm_suspend(struct device *dev, bool runtime)
 	mutex_lock(&state->lock);
 	if (state->flags & ST_POWERED) {
 		s5pcsis_stop_stream(state);
-		ret = s5p_csis_phy_enable(state->index, false);
+		ret = phy_power_off(state->phy);
 		if (ret)
 			goto unlock;
 		ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
@@ -929,7 +939,7 @@ static int s5pcsis_pm_resume(struct device *dev, bool runtime)
 					    state->supplies);
 		if (ret)
 			goto unlock;
-		ret = s5p_csis_phy_enable(state->index, true);
+		ret = phy_power_on(state->phy);
 		if (!ret) {
 			state->flags |= ST_POWERED;
 		} else {
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
index bf34e17..9214317 100644
--- a/include/linux/platform_data/mipi-csis.h
+++ b/include/linux/platform_data/mipi-csis.h
@@ -17,21 +17,14 @@
  * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM
  * @lanes:       number of data lanes used
  * @hs_settle:   HS-RX settle time
+ * @phy_label:	 the generic PHY label
  */
 struct s5p_platform_mipi_csis {
 	unsigned long clk_rate;
 	u8 wclk_source;
 	u8 lanes;
 	u8 hs_settle;
+	const char *phy_label;
 };
 
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @id:     MIPI-CSIS harware instance index (0...1)
- * @on:     true to enable D-PHY and deassert its reset
- *          false to disable D-PHY
- * @return: 0 on success, or negative error code on failure
- */
-int s5p_csis_phy_enable(int id, bool on);
-
 #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 4/5] [media] exynos4-is: Use the generic MIPI CSIS PHY driver
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Use the generic PHY API instead of the platform callback to control
the MIPI CSIS DPHY. The 'phy_label' field is added to the platform
data structure to allow PHY lookup on non-dt platforms

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/platform/exynos4-is/mipi-csis.c |   16 +++++++++++++---
 include/linux/platform_data/mipi-csis.h       |   11 ++---------
 2 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index a2eda9d..8436254 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -20,6 +20,7 @@
 #include <linux/memory.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/mipi-csis.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -167,6 +168,7 @@ struct csis_pktbuf {
  * @sd: v4l2_subdev associated with CSIS device instance
  * @index: the hardware instance index
  * @pdev: CSIS platform device
+ * @phy: pointer to the CSIS generic PHY
  * @regs: mmaped I/O registers memory
  * @supplies: CSIS regulator supplies
  * @clock: CSIS clocks
@@ -189,6 +191,8 @@ struct csis_state {
 	struct v4l2_subdev sd;
 	u8 index;
 	struct platform_device *pdev;
+	struct phy *phy;
+	const char *phy_label;
 	void __iomem *regs;
 	struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES];
 	struct clk *clock[NUM_CSIS_CLOCKS];
@@ -726,6 +730,7 @@ static int s5pcsis_get_platform_data(struct platform_device *pdev,
 	state->index = max(0, pdev->id);
 	state->max_num_lanes = state->index ? CSIS1_MAX_LANES :
 					      CSIS0_MAX_LANES;
+	state->phy_label = pdata->phy_label;
 	return 0;
 }
 
@@ -763,8 +768,9 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
 					"samsung,csis-wclk");
 
 	state->num_lanes = endpoint.bus.mipi_csi2.num_data_lanes;
-
 	of_node_put(node);
+
+	state->phy_label = "csis";
 	return 0;
 }
 #else
@@ -800,6 +806,10 @@ static int s5pcsis_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	state->phy = devm_phy_get(dev, state->phy_label);
+	if (IS_ERR(state->phy))
+		return PTR_ERR(state->phy);
+
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	state->regs = devm_ioremap_resource(dev, mem_res);
 	if (IS_ERR(state->regs))
@@ -893,7 +903,7 @@ static int s5pcsis_pm_suspend(struct device *dev, bool runtime)
 	mutex_lock(&state->lock);
 	if (state->flags & ST_POWERED) {
 		s5pcsis_stop_stream(state);
-		ret = s5p_csis_phy_enable(state->index, false);
+		ret = phy_power_off(state->phy);
 		if (ret)
 			goto unlock;
 		ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
@@ -929,7 +939,7 @@ static int s5pcsis_pm_resume(struct device *dev, bool runtime)
 					    state->supplies);
 		if (ret)
 			goto unlock;
-		ret = s5p_csis_phy_enable(state->index, true);
+		ret = phy_power_on(state->phy);
 		if (!ret) {
 			state->flags |= ST_POWERED;
 		} else {
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
index bf34e17..9214317 100644
--- a/include/linux/platform_data/mipi-csis.h
+++ b/include/linux/platform_data/mipi-csis.h
@@ -17,21 +17,14 @@
  * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM
  * @lanes:       number of data lanes used
  * @hs_settle:   HS-RX settle time
+ * @phy_label:	 the generic PHY label
  */
 struct s5p_platform_mipi_csis {
 	unsigned long clk_rate;
 	u8 wclk_source;
 	u8 lanes;
 	u8 hs_settle;
+	const char *phy_label;
 };
 
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @id:     MIPI-CSIS harware instance index (0...1)
- * @on:     true to enable D-PHY and deassert its reset
- *          false to disable D-PHY
- * @return: 0 on success, or negative error code on failure
- */
-int s5p_csis_phy_enable(int id, bool on);
-
 #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 4/5] [media] exynos4-is: Use the generic MIPI CSIS PHY driver
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Use the generic PHY API instead of the platform callback to control
the MIPI CSIS DPHY. The 'phy_label' field is added to the platform
data structure to allow PHY lookup on non-dt platforms

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/platform/exynos4-is/mipi-csis.c |   16 +++++++++++++---
 include/linux/platform_data/mipi-csis.h       |   11 ++---------
 2 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index a2eda9d..8436254 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -20,6 +20,7 @@
 #include <linux/memory.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_data/mipi-csis.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -167,6 +168,7 @@ struct csis_pktbuf {
  * @sd: v4l2_subdev associated with CSIS device instance
  * @index: the hardware instance index
  * @pdev: CSIS platform device
+ * @phy: pointer to the CSIS generic PHY
  * @regs: mmaped I/O registers memory
  * @supplies: CSIS regulator supplies
  * @clock: CSIS clocks
@@ -189,6 +191,8 @@ struct csis_state {
 	struct v4l2_subdev sd;
 	u8 index;
 	struct platform_device *pdev;
+	struct phy *phy;
+	const char *phy_label;
 	void __iomem *regs;
 	struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES];
 	struct clk *clock[NUM_CSIS_CLOCKS];
@@ -726,6 +730,7 @@ static int s5pcsis_get_platform_data(struct platform_device *pdev,
 	state->index = max(0, pdev->id);
 	state->max_num_lanes = state->index ? CSIS1_MAX_LANES :
 					      CSIS0_MAX_LANES;
+	state->phy_label = pdata->phy_label;
 	return 0;
 }
 
@@ -763,8 +768,9 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
 					"samsung,csis-wclk");
 
 	state->num_lanes = endpoint.bus.mipi_csi2.num_data_lanes;
-
 	of_node_put(node);
+
+	state->phy_label = "csis";
 	return 0;
 }
 #else
@@ -800,6 +806,10 @@ static int s5pcsis_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	state->phy = devm_phy_get(dev, state->phy_label);
+	if (IS_ERR(state->phy))
+		return PTR_ERR(state->phy);
+
 	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	state->regs = devm_ioremap_resource(dev, mem_res);
 	if (IS_ERR(state->regs))
@@ -893,7 +903,7 @@ static int s5pcsis_pm_suspend(struct device *dev, bool runtime)
 	mutex_lock(&state->lock);
 	if (state->flags & ST_POWERED) {
 		s5pcsis_stop_stream(state);
-		ret = s5p_csis_phy_enable(state->index, false);
+		ret = phy_power_off(state->phy);
 		if (ret)
 			goto unlock;
 		ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
@@ -929,7 +939,7 @@ static int s5pcsis_pm_resume(struct device *dev, bool runtime)
 					    state->supplies);
 		if (ret)
 			goto unlock;
-		ret = s5p_csis_phy_enable(state->index, true);
+		ret = phy_power_on(state->phy);
 		if (!ret) {
 			state->flags |= ST_POWERED;
 		} else {
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
index bf34e17..9214317 100644
--- a/include/linux/platform_data/mipi-csis.h
+++ b/include/linux/platform_data/mipi-csis.h
@@ -17,21 +17,14 @@
  * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM
  * @lanes:       number of data lanes used
  * @hs_settle:   HS-RX settle time
+ * @phy_label:	 the generic PHY label
  */
 struct s5p_platform_mipi_csis {
 	unsigned long clk_rate;
 	u8 wclk_source;
 	u8 lanes;
 	u8 hs_settle;
+	const char *phy_label;
 };
 
-/**
- * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @id:     MIPI-CSIS harware instance index (0...1)
- * @on:     true to enable D-PHY and deassert its reset
- *          false to disable D-PHY
- * @return: 0 on success, or negative error code on failure
- */
-int s5p_csis_phy_enable(int id, bool on);
-
 #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 5/5] ARM: Samsung: Remove the MIPI PHY setup code
  2013-06-28 13:43 ` Sylwester Nawrocki
  (?)
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  -1 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel, linux-samsung-soc
  Cc: kishon, linux-media, kyungmin.park, balbi, t.figa,
	devicetree-discuss, kgene.kim, dh09.lee, jg1.han, inki.dae,
	tomi.valkeinen, plagnioj, jason77.wang, linux-fbdev,
	Sylwester Nawrocki

Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM
DPHYs so we can remove now unused code at arch/arm/plat-samsung.
In case there is any board file for S5PV210 platforms using MIPI
CSIS/DSIM (not any upstream currently) it should use the generic
PHY API to bind the PHYs to respective PHY consumer drivers and
a platform device for the PHY provider should be defined.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos/include/mach/regs-pmu.h    |    5 --
 arch/arm/mach-s5pv210/include/mach/regs-clock.h |    4 --
 arch/arm/plat-samsung/Kconfig                   |    5 --
 arch/arm/plat-samsung/Makefile                  |    1 -
 arch/arm/plat-samsung/setup-mipiphy.c           |   60 -----------------------
 5 files changed, 75 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c

diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 57344b7..2cdb63e 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -44,11 +44,6 @@
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 032de66..e345584 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -147,10 +147,6 @@
 #define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b21d9d5..60f6337 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -388,11 +388,6 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
-
 config S3C_SETUP_CAMIF
 	bool
 	help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 5d7f839..0db786e 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
deleted file mode 100644
index 66df315..0000000
--- a/arch/arm/plat-samsung/setup-mipiphy.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	u32 cfg;
-
-	id = max(0, id);
-	if (id > 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(id);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(int id, bool on)
-{
-	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
-}
-EXPORT_SYMBOL(s5p_csis_phy_enable);
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
-}
-EXPORT_SYMBOL(s5p_dsim_phy_enable);
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 5/5] ARM: Samsung: Remove the MIPI PHY setup code
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM
DPHYs so we can remove now unused code at arch/arm/plat-samsung.
In case there is any board file for S5PV210 platforms using MIPI
CSIS/DSIM (not any upstream currently) it should use the generic
PHY API to bind the PHYs to respective PHY consumer drivers and
a platform device for the PHY provider should be defined.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos/include/mach/regs-pmu.h    |    5 --
 arch/arm/mach-s5pv210/include/mach/regs-clock.h |    4 --
 arch/arm/plat-samsung/Kconfig                   |    5 --
 arch/arm/plat-samsung/Makefile                  |    1 -
 arch/arm/plat-samsung/setup-mipiphy.c           |   60 -----------------------
 5 files changed, 75 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c

diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 57344b7..2cdb63e 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -44,11 +44,6 @@
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 032de66..e345584 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -147,10 +147,6 @@
 #define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b21d9d5..60f6337 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -388,11 +388,6 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
-
 config S3C_SETUP_CAMIF
 	bool
 	help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 5d7f839..0db786e 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
deleted file mode 100644
index 66df315..0000000
--- a/arch/arm/plat-samsung/setup-mipiphy.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	u32 cfg;
-
-	id = max(0, id);
-	if (id > 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(id);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(int id, bool on)
-{
-	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
-}
-EXPORT_SYMBOL(s5p_csis_phy_enable);
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
-}
-EXPORT_SYMBOL(s5p_dsim_phy_enable);
-- 
1.7.9.5


^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCH v4 5/5] ARM: Samsung: Remove the MIPI PHY setup code
@ 2013-06-28 13:43   ` Sylwester Nawrocki
  0 siblings, 0 replies; 18+ messages in thread
From: Sylwester Nawrocki @ 2013-06-28 13:43 UTC (permalink / raw)
  To: linux-arm-kernel

Generic PHY drivers are used to handle the MIPI CSIS and MIPI DSIM
DPHYs so we can remove now unused code at arch/arm/plat-samsung.
In case there is any board file for S5PV210 platforms using MIPI
CSIS/DSIM (not any upstream currently) it should use the generic
PHY API to bind the PHYs to respective PHY consumer drivers and
a platform device for the PHY provider should be defined.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos/include/mach/regs-pmu.h    |    5 --
 arch/arm/mach-s5pv210/include/mach/regs-clock.h |    4 --
 arch/arm/plat-samsung/Kconfig                   |    5 --
 arch/arm/plat-samsung/Makefile                  |    1 -
 arch/arm/plat-samsung/setup-mipiphy.c           |   60 -----------------------
 5 files changed, 75 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/setup-mipiphy.c

diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 57344b7..2cdb63e 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -44,11 +44,6 @@
 #define S5P_DAC_PHY_CONTROL			S5P_PMUREG(0x070C)
 #define S5P_DAC_PHY_ENABLE			(1 << 0)
 
-#define S5P_MIPI_DPHY_CONTROL(n)		S5P_PMUREG(0x0710 + (n) * 4)
-#define S5P_MIPI_DPHY_ENABLE			(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN			(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN			(1 << 2)
-
 #define S5P_INFORM0				S5P_PMUREG(0x0800)
 #define S5P_INFORM1				S5P_PMUREG(0x0804)
 #define S5P_INFORM2				S5P_PMUREG(0x0808)
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 032de66..e345584 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -147,10 +147,6 @@
 #define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
 #define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
 #define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
-#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814)
-#define S5P_MIPI_DPHY_ENABLE	(1 << 0)
-#define S5P_MIPI_DPHY_SRESETN	(1 << 1)
-#define S5P_MIPI_DPHY_MRESETN	(1 << 2)
 
 #define S5P_INFORM0		S5P_CLKREG(0xF000)
 #define S5P_INFORM1		S5P_CLKREG(0xF004)
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b21d9d5..60f6337 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -388,11 +388,6 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
-config S5P_SETUP_MIPIPHY
-	bool
-	help
-	  Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices
-
 config S3C_SETUP_CAMIF
 	bool
 	help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 5d7f839..0db786e 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight.o
 
 obj-$(CONFIG_S3C_SETUP_CAMIF)	+= setup-camif.o
-obj-$(CONFIG_S5P_SETUP_MIPIPHY)	+= setup-mipiphy.o
 
 # DMA support
 
diff --git a/arch/arm/plat-samsung/setup-mipiphy.c b/arch/arm/plat-samsung/setup-mipiphy.c
deleted file mode 100644
index 66df315..0000000
--- a/arch/arm/plat-samsung/setup-mipiphy.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <mach/regs-clock.h>
-
-static int __s5p_mipi_phy_control(int id, bool on, u32 reset)
-{
-	static DEFINE_SPINLOCK(lock);
-	void __iomem *addr;
-	unsigned long flags;
-	u32 cfg;
-
-	id = max(0, id);
-	if (id > 1)
-		return -EINVAL;
-
-	addr = S5P_MIPI_DPHY_CONTROL(id);
-
-	spin_lock_irqsave(&lock, flags);
-
-	cfg = __raw_readl(addr);
-	cfg = on ? (cfg | reset) : (cfg & ~reset);
-	__raw_writel(cfg, addr);
-
-	if (on) {
-		cfg |= S5P_MIPI_DPHY_ENABLE;
-	} else if (!(cfg & (S5P_MIPI_DPHY_SRESETN |
-			    S5P_MIPI_DPHY_MRESETN) & ~reset)) {
-		cfg &= ~S5P_MIPI_DPHY_ENABLE;
-	}
-
-	__raw_writel(cfg, addr);
-	spin_unlock_irqrestore(&lock, flags);
-
-	return 0;
-}
-
-int s5p_csis_phy_enable(int id, bool on)
-{
-	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
-}
-EXPORT_SYMBOL(s5p_csis_phy_enable);
-
-int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
-{
-	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
-}
-EXPORT_SYMBOL(s5p_dsim_phy_enable);
-- 
1.7.9.5

^ permalink raw reply related	[flat|nested] 18+ messages in thread
end of thread, other threads:[~2013-06-28 13:43 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-28 13:43 [PATCH v4 0/5] Generic PHY driver for the Exynos SoC MIPI CSI-2/DSI DPHYs Sylwester Nawrocki
2013-06-28 13:43 ` Sylwester Nawrocki
2013-06-28 13:43 ` Sylwester Nawrocki
2013-06-28 13:43 ` [PATCH v4 1/5] ARM: dts: Add MIPI PHY node to exynos4.dtsi Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43 ` [PATCH v4 2/5] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43 ` [PATCH v4 3/5] video: exynos_mipi_dsim: Use the generic PHY driver Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43 ` [PATCH v4 4/5] [media] exynos4-is: Use the generic MIPI CSIS " Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43 ` [PATCH v4 5/5] ARM: Samsung: Remove the MIPI PHY setup code Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki
2013-06-28 13:43   ` Sylwester Nawrocki

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.